fix: a swap's WETH minimum reads as ETH only when all its WETH reaches the UNWRAP_WETH (closes #642)

Between the step that set the output side and the UNWRAP_WETH, only a
step the decoder read that is a PERMIT2_PERMIT, a BALANCE_CHECK_ERC20,
or a SWEEP, TRANSFER, PAY_PORTION or PAY_PORTION_FULL_PRECISION of a
token other than WETH, and not of ETH to a WETH contract, keeps the
swap's WETH minimum as an ETH minimum; any other step leaves ETH with no
minimum. After an UNWRAP_WETH whose recipient is the router or cannot be
read, any later step but those makes the swap read WETH with no minimum.
A WETH fee paid by PAY_PORTION before the UNWRAP_WETH now shows no
minimum. README Display Consistency states the same rule.

Model: opus-5-5

README.md

@@ -500,9 +500,12 @@ papered over:
   forced by clicking Reveal and the settings gear in one page task, which a
   person cannot do; the case a person can hit, the first decrypt after the popup
   opens while libsodium is still loading, is not driven.
-- Approval windows open at 1280x720 whatever size the extension asks for, so
-  whether an approval screen fits its window is checked in the Firefox suite
-  only.
+- Approval windows open at 1280x720 whatever size the extension asks for. The
+  site-connection prompt and the transaction approval are checked for sideways
+  scrolling at 396x600 by sizing the page itself for that measurement only, and
+  the rest of each test runs at 1280x720. That leaves out the window's frame and
+  the page widening its window, so whether an approval screen fits its window is
+  checked in the Firefox suite only.
 
 Any test that drives a failure path on purpose declares the `console.error` it
 is about to provoke, via `errors.expect()`. That is not a mute: the declaration
@@ -1116,22 +1119,23 @@ with the same floor (`.5` reads `.5000`).
 
 **Specific Exception — unknown token scale:** Calldata carries base units and no
 scale, so every amount on the dApp approval screen needs the token's `decimals`.
-It is resolved from the bundled token list, then from the tokens the user
-tracks, then from what the block explorer reported for the contract
-(`resolveTokenDecimals()` in `src/shared/approvalAmount.js`). Where none of them
-answers, the amount is not formatted: the line reads
-`5000000000 base units (decimals unknown)`. A guessed scale is not an
-approximation but a different number — 1,000 units of a 6-decimal token
-formatted at 18 decimals reads `0.000000001` — on the screen whose only job is
-to state what is being authorized. Both amount paths of that screen take this
-rule: the ERC-20 `transfer`/`approve` line (`src/popup/views/approval.js`) and
-the swap's `Amount` and `Min. received` lines (`src/shared/uniswap.js`). The
-token permission warning on the signature screen takes the same rule for its
-amounts. An unbounded allowance or permit needs no scale to describe and is
-still shown as `Unlimited`. A source's answer counts only if it is a whole
-number from 0 to 80: `decimals()` returns a `uint8`, but `formatUnits()` cannot
-format more than 80 decimal places, so a token that reports 81 to 255 is shown
-as one whose scale nothing knows.
+It is resolved from the bundled token list, then from the tokens the user tracks
+on the network the transaction is for, then, when that is the active network,
+from what the block explorer reported for the contract in the wallet's balances,
+which are the active network's only (`resolveTokenDecimals()` in
+`src/shared/approvalAmount.js`). Where none of them answers, the amount is not
+formatted: the line reads `5000000000 base units (decimals unknown)`. A guessed
+scale is not an approximation but a different number — 1,000 units of a
+6-decimal token formatted at 18 decimals reads `0.000000001` — on the screen
+whose only job is to state what is being authorized. Both amount paths of that
+screen take this rule: the ERC-20 `transfer`/`approve` line
+(`src/popup/views/approval.js`) and the swap's `Amount` and `Min. received`
+lines (`src/shared/uniswap.js`). The token permission warning on the signature
+screen takes the same rule for its amounts. An unbounded allowance or permit
+needs no scale to describe and is still shown as `Unlimited`. A source's answer
+counts only if it is a whole number from 0 to 80: `decimals()` returns a
+`uint8`, but `formatUnits()` cannot format more than 80 decimal places, so a
+token that reports 81 to 255 is shown as one whose scale nothing knows.
 
 The rule holds only if nothing invents a scale UPSTREAM of it. Those three
 sources are read as authoritative, so a value written into one of them cannot be
@@ -1175,28 +1179,22 @@ number. They can read:
 - `Unlimited`: on the ERC-20 `Amount` line, an `approve` of the `uint256`
   maximum, an unbounded allowance. On the swap's `Amount` line, any amount at or
   above the `uint160` maximum, whichever step set the line: a `PERMIT2_PERMIT`
-  amount at that maximum, which is an unbounded permit, or a V2 or V3 exact-in,
-  V2 exact-out or `WRAP_ETH` amount that large, which is not an allowance. The
+  amount at that maximum, which is an unbounded permit, or a V2 or V3 exact-in
+  or exact-out or `WRAP_ETH` amount that large, which is not an allowance. The
   router's whole-balance value, `CONTRACT_BALANCE` (`2^255`), is one such
   amount.
-- `Up to <amount>`: the swap's `Amount` line, when the transaction has a V2
-  exact-out step, whichever step set the line, including the `WRAP_ETH` of a
+- `Up to <amount>`: the swap's `Amount` line, when the transaction has a V2 or
+  V3 exact-out step, whichever step set the line, including the `WRAP_ETH` of a
   swap paid in ETH and a `PERMIT2_PERMIT`. The swap spends at most that figure,
   not necessarily all of it; the wait, success and error screens show it with
   the same words. `Unlimited`, `All available (V4 open delta)` and
   `Whatever an earlier step sent to the pair (V2 already paid)` keep their
-  wording. When a V2 exact-out step sets `Min. received`, that line shows its
-  `amountOut`, the exact amount it buys.
+  wording. When a V2 or V3 exact-out step sets `Min. received`, that line shows
+  its `amountOut`, the exact amount it buys.
 - `All available (V4 open delta)`: the swap's `Amount` line, when the amount it
   shows is a V4 exact-in `amountIn` of zero. V4 reads that zero as "use the
-  whole open delta", so the calldata states no quantity. The line shows the
-  amount of the step that sets the input side: the last `PERMIT2_PERMIT` step if
-  there is one, otherwise the first V2 or V3 exact-in, V2 exact-out, `WRAP_ETH`
-  or V4 swap step that names an input token or amount. A V4 step with a swap
-  action sets the input side when no earlier step set it, even when it names
-  neither, as described below. A V2 exact-out step gives its `amountInMax`, and
-  a V4 swap step the `amountIn` of the swap action that spends its input
-  currency.
+  whole open delta", so the calldata states no quantity. Transaction Decoding
+  below gives the steps whose amounts the line shows.
 - `Whatever an earlier step sent to the pair (V2 already paid)`: the swap's
   `Amount` line, when the amount it shows is a V2 exact-in `amountIn` of zero.
   The router reads that zero as "the pair already holds the input tokens": the
@@ -1246,12 +1244,38 @@ only when no earlier step set it. It finds each side by three rules:
    `Amount` or `Min. received`. A side they did not name is unknown, and the
    step sets it as unknown with no figure.
 
+Under each of these rules, when the user pays the step any of the input
+currency, its `Amount` is instead what the user pays it of that currency when
+the decoder knows that amount, and otherwise there is none (see Transaction
+Decoding). So a step whose USDT-for-USDC swap action could not be read, with a
+`SETTLE` of 400 USDT paid by the user, reads `Amount 400.0000 USDT`.
+
 A V4 step with no swap action sets only the sides its `SETTLE`, `SETTLE_ALL`,
 `TAKE` or `TAKE_ALL` names.
 
-An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side is WETH,
-on mainnet or Sepolia, or when no step set the output side; a WETH
-`Min. received` figure then reads in ETH. Otherwise `Token Out` and
+An `UNWRAP_WETH` step makes `Token Out` ETH only when no step set the output
+side, or when the output side is WETH, on mainnet or Sepolia, that the step that
+set it paid to the router and that the router still holds when the `UNWRAP_WETH`
+runs (Transaction Decoding below gives what the router holds). The router
+unwraps only the WETH it holds, so WETH that step paid to the user, or to anyone
+else, stays WETH: a swap that pays the router WETH, then a swap that pays the
+user WETH, then an unwrap, shows WETH with the second swap's minimum. The
+minimum reads in ETH only when that step paid all its WETH to the router and
+every step between it and the `UNWRAP_WETH` is one the decoder read of these: a
+`PERMIT2_PERMIT`, a `BALANCE_CHECK_ERC20`, or a `SWEEP`, `TRANSFER`,
+`PAY_PORTION` or `PAY_PORTION_FULL_PRECISION` of a token other than WETH, but
+not of ETH to a WETH contract, which pays the router WETH. None of these can
+take WETH out of the router or pay anyone WETH; the decoder treats every other
+step as one that may. Otherwise the swap shows ETH with no minimum, as it does
+after a V4 step that `TAKE`s some of its WETH to the user and the rest to the
+router, or that pays the router WETH beside a payout the decoder cannot read,
+and with a WETH interface fee paid by `PAY_PORTION` before the `UNWRAP_WETH`:
+the decoder does not count how much of that step's minimum reaches the
+`UNWRAP_WETH`, nor read the `UNWRAP_WETH`'s own minimum. When that `UNWRAP_WETH`
+pays the router, or its recipient cannot be read, the router may hold the ETH,
+and a later step may pay it out as WETH, as a `WRAP_ETH` of it to the user does:
+after any later step but those listed, the swap shows WETH with no minimum. A
+later step that sets the output side sets it anew. Otherwise `Token Out` and
 `Min. received` keep the output side's own token and figure, whether the swap
 was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
 unwraps the WETH it did not spend shows USDC. The token permission warning on
@@ -1530,9 +1554,11 @@ first screen that cannot be rendered from saved state, such as Send or AddToken,
 or at AddressToken for any token but the native one, because that token was
 picked on the previous network. The cut stack is saved with the switch, so a
 popup closed straight after it and reopened onto Settings lands in the same
-place. "Back" then renders the screen it lands on for the new network, except
-ConfirmTx, which keeps the network its transaction was reviewed on, and anything
-typed there and not saved, which belonged to the previous network, is dropped.
+place. "Back" then renders the screen it lands on for the new network, and
+anything typed there and not saved, which belonged to the previous network, is
+dropped. ConfirmTx, WaitTx, SuccessTx, ErrorTx and TransactionDetail are
+rendered instead for the network of the transaction they show: the network it
+was reviewed on for ConfirmTx, and the network it was sent on for the others.
 Without a wallet the stack is not cut, because it starts at Welcome, which shows
 nothing from a network.
 
@@ -1891,14 +1917,17 @@ view would leave a wallet one click from deletion.
       no recipient." instead
     - Transaction hash: full hash (tap to copy) + etherscan link
     - Count-up timer: "Waiting for confirmation... Ns"
-- **Behavior**: Polls `getTransactionReceipt` every 10 seconds. The wait is
-  persisted: closing and reopening the popup resumes the poll, with the elapsed
-  counter and the timeout deadline still measured from the original broadcast. A
-  lookup that fails is retried on the next tick rather than counted as a missing
-  receipt, because a failed lookup says nothing about the transaction; but six
-  failures in a row (60 seconds at the poll cadence) end the wait, so an RPC
-  that never answers cannot leave it running indefinitely. Any lookup that
-  answers resets that count.
+- **Behavior**: Polls `getTransactionReceipt` every 10 seconds. The screen
+  describes the transaction on the network it was sent on, whichever network is
+  active: the receipt is asked of that network's RPC endpoint, the one Settings
+  has for it, and the To and hash links open that network's explorer. The wait
+  is persisted: closing and reopening the popup resumes the poll, with the
+  elapsed counter and the timeout deadline still measured from the original
+  broadcast. A lookup that fails is retried on the next tick rather than counted
+  as a missing receipt, because a failed lookup says nothing about the
+  transaction; but six failures in a row (60 seconds at the poll cadence) end
+  the wait, so an RPC that never answers cannot leave it running indefinitely.
+  Any lookup that answers resets that count.
 - **Transitions**:
     - Receipt found → **SuccessTx**
     - A lookup that answers "no receipt" 60 seconds or more after broadcast →
@@ -1919,9 +1948,12 @@ view would leave a wallet one click from deletion.
     - Amount + symbol
     - To: color dot + full address + etherscan link, or for a contract creation
       the same sentence as on WaitTx
-    - Block number
+    - Block number + etherscan link
     - Transaction hash: full hash (tap to copy) + etherscan link
     - "Done" button
+- **Behavior**: As on WaitTx, every etherscan link on the screen opens the
+  explorer of the network the transaction was sent on, whichever network is
+  active.
 - **Transitions**:
     - "Done" in the approval popup → closes the popup window
     - "Done" otherwise → resets the navigation stack, then → **AddressToken**
@@ -1941,6 +1973,9 @@ view would leave a wallet one click from deletion.
     - Transaction hash section (hidden if broadcast failed before getting hash):
       full hash (tap to copy) + etherscan link
     - "Done" button
+- **Behavior**: As on WaitTx, every etherscan link on the screen opens the
+  explorer of the network the transaction was sent on, whichever network is
+  active.
 - **Transitions**:
     - "Done" in the approval popup → closes the popup window
     - "Done" otherwise → resets the navigation stack, then → **AddressToken**
@@ -1963,7 +1998,10 @@ view would leave a wallet one click from deletion.
 #### TransactionDetail (`transaction`)
 
 - **When**: User tapped a transaction row on Home, AddressDetail, or
-  AddressToken.
+  AddressToken. The screen describes the transaction on the network it was sent
+  on, whichever network is active: its block, network details, decoded details
+  and raw data are read from that network's Blockscout, the one Settings has for
+  it, and its etherscan links open that network's explorer.
 - **Elements** (grouped into logical blocks using light well containers; field
   labels are self-explanatory so groups have no headings):
     - "Transaction" heading, "Back" button
@@ -1971,7 +2009,11 @@ view would leave a wallet one click from deletion.
     - Type: transaction classification — one of: Native ETH Transfer, ERC-20
       Token Transfer, Swap, Token Approval, Contract Call, Contract Creation. A
       transfer with a token contract is an ERC-20 Token Transfer whatever symbol
-      the token reports.
+      the token reports. A call named `execute` or `multicall` is a Swap, here
+      and on its history row, only when it was sent to one of the Universal
+      Router addresses Uniswap publishes for the network it was sent on (see
+      Transaction Decoding); sent to any other contract, its history row shows
+      the method name and this line reads Contract Call.
     - Status: "Success" or "Failed"
     - From: blockie + color dot + full address (tap to copy) + etherscan link;
       ENS name if available
@@ -2364,10 +2406,11 @@ view would leave a wallet one click from deletion.
     - Site origin (bold, scheme and port included) + "wants to send a
       transaction"
     - Decoded action (if calldata is recognized): action name, token details,
-      amounts, what each `PERMIT2_TRANSFER_FROM` moves and where to, steps,
-      deadline, and unless a swap pays only the From address, a `Paid to` line
-      for each other address it pays, or saying that a token stays in the router
-      or who it pays is unknown (see Transaction Decoding)
+      amounts, what each swap step spends that the `Amount` line does not give,
+      what each `PERMIT2_TRANSFER_FROM` moves and where to, steps, deadline, and
+      unless a swap pays only the From address, a `Paid to` line for each other
+      address it pays, or saying that a token stays in the router or who it pays
+      is unknown (see Transaction Decoding)
     - From: color dot + full address + etherscan link
     - Contract: color dot + full address + etherscan link, token symbol label if
       known; for a contract creation, the same sentence as on WaitTx
@@ -2380,6 +2423,11 @@ view would leave a wallet one click from deletion.
     - Raw data: full calldata displayed inline (shown if present)
     - Password input and an error line
     - "Confirm" / "Reject" buttons
+- **Behavior**: Every etherscan link on the screen opens the explorer of the
+  network the transaction was populated on, whichever network is active. The
+  Value and Network fee lines each give the USD value of the exact amount at the
+  price on that network, as on ConfirmTx: none for a testnet transaction or one
+  on a chain id that names no network.
 - **Transitions**:
     - "Confirm" (correct password) → decrypts and signs the transaction it was
       shown, exactly as shown, hands the signed transaction to the background to
@@ -2988,31 +3036,37 @@ Currently supported:
   "Swap USDT → ETH"), token addresses, amounts, execution steps, and deadline.
   The swap summary is shown only for a transaction sent to one of the Universal
   Router addresses Uniswap publishes for the network: on TxApproval the network
-  the transaction is for, on TransactionDetail the active network. The same
-  calldata sent to any other address is shown as raw data. Decodes Permit2,
-  V2/V3/V4 swaps, wrap/unwrap, and balance checks. A V4 swap action is read only
-  in the parameter shape deployed on mainnet and Sepolia, not in the newer one
-  on `v4-periphery` `main`, which adds a `minHopPriceX36` field. An action in
-  any other shape is not read, and its step is listed as
-  `V4 Swap (could not be decoded)`. Each step is named and read as the command
-  that the release of the router at that address runs for its command type, as
-  that release's `contracts/libraries/Commands.sol` names it. The decoder reads
-  the type from the command byte with the mask that router uses: `0x1f` for
-  `UniversalRouterV1`, `0x3f` for `UniversalRouterV1_2_V2Support` and
-  `UniversalRouterV2`, and `0x7f` for `UniversalRouterV2_1_1` and
-  `UniversalRouterV2_1_2`. The allow-revert flag (`0x80`) therefore does not
-  change the command a step is read as. Releases run different commands for some
-  types: on `UniversalRouterV1` and `UniversalRouterV1_2_V2Support`, `0x10` to
-  `0x13` are NFT commands, where the later routers run `V4_SWAP`,
-  `V3_POSITION_MANAGER_PERMIT`, `V3_POSITION_MANAGER_CALL` and
-  `V4_INITIALIZE_POOL`. The decoder does not read those routers' NFT commands,
-  and lists each by its name there, for example `Seaport` for `SEAPORT` (`0x10`
-  on `UniversalRouterV1`). A type a release names no command for is listed by
-  its number, for example `Command 0x0e` on `UniversalRouterV1`, which has no
-  `BALANCE_CHECK_ERC20` and reverts on it. The router reverts the whole
-  transaction when a step fails, unless the step's command byte has that flag
-  set and its command is one the router lets fail, as each release's
-  `contracts/base/Dispatcher.sol` shows: on `UniversalRouterV2`,
+  the transaction is for, on TransactionDetail the network it was sent on. The
+  same calldata sent to any other address is shown as raw data. Decodes Permit2,
+  V2/V3/V4 swaps, wrap/unwrap, and balance checks. A V3 swap step's path is read
+  as the router reads it: a `V3_SWAP_EXACT_IN` path runs from the token it
+  spends to the token it buys, and a `V3_SWAP_EXACT_OUT` path from the token it
+  buys to the token it spends, so that step's input token is its path's last
+  token and its output token the first. The router reads a path as one token
+  address followed by whole hops of a 3-byte fee and a token address, and
+  ignores any bytes after the last hop, so the decoder does not read a path with
+  such bytes. A V4 swap action is read only in the parameter shape deployed on
+  mainnet and Sepolia, not in the newer one on `v4-periphery` `main`, which adds
+  a `minHopPriceX36` field. An action in any other shape is not read, and its
+  step is listed as `V4 Swap (could not be decoded)`. Each step is named and
+  read as the command that the release of the router at that address runs for
+  its command type, as that release's `contracts/libraries/Commands.sol` names
+  it. The decoder reads the type from the command byte with the mask that router
+  uses: `0x1f` for `UniversalRouterV1`, `0x3f` for
+  `UniversalRouterV1_2_V2Support` and `UniversalRouterV2`, and `0x7f` for
+  `UniversalRouterV2_1_1` and `UniversalRouterV2_1_2`. The allow-revert flag
+  (`0x80`) therefore does not change the command a step is read as. Releases run
+  different commands for some types: on `UniversalRouterV1` and
+  `UniversalRouterV1_2_V2Support`, `0x10` to `0x13` are NFT commands, where the
+  later routers run `V4_SWAP`, `V3_POSITION_MANAGER_PERMIT`,
+  `V3_POSITION_MANAGER_CALL` and `V4_INITIALIZE_POOL`. The decoder does not read
+  those routers' NFT commands, and lists each by its name there, for example
+  `Seaport` for `SEAPORT` (`0x10` on `UniversalRouterV1`). A type a release
+  names no command for is listed by its number, for example `Command 0x0e` on
+  `UniversalRouterV1`, which has no `BALANCE_CHECK_ERC20` and reverts on it. The
+  router reverts the whole transaction when a step fails, unless the step's
+  command byte has that flag set and its command is one the router lets fail, as
+  each release's `contracts/base/Dispatcher.sol` shows: on `UniversalRouterV2`,
   `UniversalRouterV2_1_1` and `UniversalRouterV2_1_2`, `PERMIT2_PERMIT`,
   `PERMIT2_PERMIT_BATCH`, `BALANCE_CHECK_ERC20`, `V3_POSITION_MANAGER_PERMIT`,
   `V3_POSITION_MANAGER_CALL`, `V4_INITIALIZE_POOL`, `V4_POSITION_MANAGER_CALL`
@@ -3075,35 +3129,40 @@ Currently supported:
   as a swap paid in ETH does, but only when that amount is not
   `CONTRACT_BALANCE` and the router held no WETH from an earlier step when the
   `WRAP_ETH` ran: after two `WRAP_ETH`s of 0.5 ETH into the router, a swap of 1
-  WETH from it reads as leaving the WETH there. The router pays a `SETTLE` of
-  `OPEN_DELTA` (zero) only what its step still owes of that token when the
-  `SETTLE` runs, so one from the router counts as spending the amounts the
-  step's swap actions state they spend of that token only when every action in
-  the step could be read, every swap action names the token it spends and the
-  token it buys (a swap action with an empty path swaps nothing), the `SETTLE`
-  is the step's only `SETTLE` or `SETTLE_ALL` of that token and comes after
-  every swap action, no swap action buys that token, and the swap actions that
-  spend it state a quantity together; otherwise it counts as spending nothing.
-  So the rest of a V4 `SETTLE` of more than its swap spends, taken to the
-  router, the WETH of a `WRAP_ETH`, and a token a swap pays the router on the
-  way to the output, each stays in the router when later steps do not spend all
-  of it, where anyone can take it in a later transaction. The router sends ETH
-  as written, so a `TRANSFER` of `CONTRACT_BALANCE` of ETH always reverts and
-  pays out nothing. A step paying a token to the V2 pair that the very next step
-  spends, as a V2 exact-in of that token whose `amountIn` is `ALREADY_PAID`
-  (zero) or `CONTRACT_BALANCE`, is a hop, not a payout: Uniswap's mixed routes
-  pay the next V2 pair directly, and the router enforces that swap's own
-  minimum. The decoder checks that the address paid is that pair, deriving it
-  from the V2 factory and pair init code hash the network's routers were
-  deployed with and the first two tokens of that step's path; a payment to any
-  other address is named. (Sepolia's `UniversalRouterV1_2_V2Support` was
-  deployed with placeholders for both values, so no V2 swap step can succeed on
-  that router.) Every other payment counts, in whichever step and of whatever
-  token, a share of the output included: an interface fee paid to another
-  address by `PAY_PORTION`, `TRANSFER` or `TAKE_PORTION` is named, and the
-  minimum reads `Min. paid out`, because the swap's minimum includes the fee.
-  The minimum reads `Min. received` only when some step pays the transaction's
-  sender (the From address on TxApproval, the sender the explorer reports on
+  WETH from it reads as leaving the WETH there. A V2 or V3 exact-out step paid
+  from the router spends an amount the calldata does not state, at most its
+  `amountInMax`, so the decoder counts it as spending nothing the router holds.
+  A `SETTLE` of `OPEN_DELTA` (zero), and a `SETTLE_ALL`, pay only what the step
+  still owes of their token when they run. The decoder takes that to be the
+  amounts the step's swap actions state they spend of that token only when every
+  action in the step could be read, every swap action names the token it spends
+  and the token it buys (a swap action with an empty path swaps nothing), the
+  `SETTLE` or `SETTLE_ALL` is the step's only `SETTLE` or `SETTLE_ALL` of that
+  token and comes after every swap action, no swap action buys that token, no
+  `TAKE`, `TAKE_ALL` or `TAKE_PORTION` in the step takes it (a `TAKE` of a
+  stated amount adds to what the step owes), and the swap actions that spend it
+  state a quantity together; otherwise it does not know the amount, and such a
+  `SETTLE` from the router counts as spending nothing. So the rest of a V4
+  `SETTLE` of more than its swap spends, taken to the router, the WETH of a
+  `WRAP_ETH`, and a token a swap pays the router on the way to the output, each
+  stays in the router when later steps do not spend all of it, where anyone can
+  take it in a later transaction. The router sends ETH as written, so a
+  `TRANSFER` of `CONTRACT_BALANCE` of ETH always reverts and pays out nothing. A
+  step paying a token to the V2 pair that the very next step spends, as a V2
+  exact-in of that token whose `amountIn` is `ALREADY_PAID` (zero) or
+  `CONTRACT_BALANCE`, is a hop, not a payout: Uniswap's mixed routes pay the
+  next V2 pair directly, and the router enforces that swap's own minimum. The
+  decoder checks that the address paid is that pair, deriving it from the V2
+  factory and pair init code hash the network's routers were deployed with and
+  the first two tokens of that step's path; a payment to any other address is
+  named. (Sepolia's `UniversalRouterV1_2_V2Support` was deployed with
+  placeholders for both values, so no V2 swap step can succeed on that router.)
+  Every other payment counts, in whichever step and of whatever token, a share
+  of the output included: an interface fee paid to another address by
+  `PAY_PORTION`, `TRANSFER` or `TAKE_PORTION` is named, and the minimum reads
+  `Min. paid out`, because the swap's minimum includes the fee. The minimum
+  reads `Min. received` only when some step pays the transaction's sender (the
+  From address on TxApproval, the sender the explorer reports on
   TransactionDetail) and no `Paid to` line is shown. `Paid to` lines after
   `Token Out` name each other address paid; one reads
   `The bridge, which pays the deposit's recipient on another network` for a
@@ -3117,24 +3176,94 @@ Currently supported:
   name); and one more reads `Unknown (could not be decoded)` when a step that
   may pay an address went unread. When no step pays anyone, a single line reads
   `Unknown (not named in the calldata)`. Wherever there is a `Paid to` line, the
-  minimum reads `Min. paid out`. After the `Amount` line (after `Token In` when
-  there is none), each `PERMIT2_TRANSFER_FROM` but one into the router, in step
-  order, gives three lines: `Moved from the sender`, the amount it moves, for
-  example `1000000.0000 USDT`; `Token moved`, giving the token's address as the
-  `Token In` line does; and `Moved to`, which reads
+  minimum reads `Min. paid out`. The `Amount` line gives the total the steps
+  take of `Token In`, from the step that sets the input side on: the first V2 or
+  V3 exact-in or exact-out, `WRAP_ETH` or V4 swap step that names an input token
+  or amount. A V4 step with a swap action sets the input side when no earlier
+  step set it, even when it names neither (see Display Consistency). That step
+  counts its own amount, whoever pays it: a V2 or V3 exact-out step its
+  `amountInMax`, and a V4 step what it takes of its input token from the user's
+  wallet, as below, or, when the user pays it none of that token, the `amountIn`
+  of the swap action that spends it. Each later V2 or V3 exact-in or exact-out
+  step whose `payerIsUser` is true takes its amount, found in the same way, from
+  the user's wallet. Every V4 step, with a swap action or without, takes from
+  the user's wallet what its `SETTLE`s paid by the user (`payerIsUser` true) and
+  its `SETTLE_ALL`s pay, for each token on its own; what the step that sets the
+  input side takes of any other token counts as a later step's take. A `SETTLE`
+  of any amount but `OPEN_DELTA` pays that amount, and a `SETTLE` of
+  `OPEN_DELTA` or a `SETTLE_ALL` pays what the step owes, as above. So a V4 step
+  that swaps 400 USDT, with a `SETTLE` of 5,000 USDT paid by the user and the
+  rest taken to another address, reads `5000.0000 USDT`. A later step paid from
+  the router spends what the router holds and takes nothing, and so does a V2
+  exact-in whose `amountIn` is `ALREADY_PAID`. A later take of `Token In` is
+  added to the total while both are quantities: a V3 exact-in of 600 USDT and a
+  V2 exact-in of 400 USDT, both paid by the user, read `1000.0000 USDT`. When
+  the decoder does not know a take's amount, the total is not known and there is
+  no `Amount` line. `Token In` is the token of the last `PERMIT2_PERMIT` the
+  decoder reads, when there is one. Its amount, `Unlimited` included, stands as
+  the `Amount` figure in place of the total only in the plain shape of Uniswap's
+  own routes: it is the only `PERMIT2_PERMIT`, its spender is the router, the
+  router may not let it fail, no step before it takes its token or a token the
+  decoder does not know, and the decoder reads every step after it in full.
+  Permit2 then lets the router take no more of the token than that amount, so
+  the permit covers every take of it. A step the decoder does not read in full
+  may raise what Permit2 lets the router take, as a `PERMIT2_PERMIT_BATCH` can:
+  a command the decoder does not read (listed at the end of this section), a
+  step whose input it cannot read, in whole or in part, and a step it fails on.
+  In any other case the line gives the total, as with no permit. When the step
+  that sets the input side spends a token other than the permit's, or one the
+  decoder does not know, its amount gets lines of its own, unless it states no
+  amount and the user pays it none of its input token, and the total has no
+  figure to start from: unless the permit's amount stands there is no `Amount`
+  line, and each take of the permit's token gets lines of its own. Each take the
+  total does not count gives three lines after the `Amount` line (after
+  `Token In` when there is none): one of a token other than `Token In`; one of
+  `Token In` after an amount that is not a quantity (a V4 open delta,
+  `ALREADY_PAID`, which keep their wording on the `Amount` line, or no stated
+  amount, as of a V4 exact-out step); and one whose amount the decoder does not
+  know. When the step that sets the input side states no amount, the user pays
+  it some of its input token, and there is no `Amount` line, that step gets them
+  too whenever another take's lines give a figure, or a `PERMIT2_TRANSFER_FROM`
+  of its token gives one, on the lines below or, into the router, on its
+  `Paid to` line, so that figure cannot read as all that leaves. When it states
+  no amount and the user pays it none of its input token, as when the router
+  pays it, that step takes none of that token from the user's wallet and never
+  gets them, with a permit or without. They come in step order, the step that
+  sets the input side first when it has them: `Moved from the sender`, its
+  amount, worded as the `Amount` line words one, or
+  `Unknown (could not be decoded)` when the decoder does not know it;
+  `Token moved`, giving the token's address as the `Token In` line does; and
+  `Moved to`, which reads `The swap step that spends it`. A token the decoder
+  does not know gives the `Moved from the sender` line alone. A step may also
+  take from the user's wallet what the decoder did not read: a V4 step whose
+  input or one of whose `SETTLE`s or `SETTLE_ALL`s it cannot read, which the
+  router still runs; a V2 or V3 exact-in or exact-out step or a
+  `PERMIT2_TRANSFER_FROM` whose input it cannot read, such as a V3 step whose
+  path is shorter than one token address or has bytes after its last hop; every
+  `PERMIT2_TRANSFER_FROM_BATCH`; every `EXECUTE_SUB_PLAN`, wherever it stands;
+  and every step it fails on. Each such step gives one `Moved from the sender`
+  line among those, reading `Unknown (could not be decoded)`. That line, or any
+  line for a token the decoder does not know, leaves no `Amount` line, whose
+  figure might be too low, and such a step before a `PERMIT2_PERMIT` keeps the
+  permit's amount from standing. Then each `PERMIT2_TRANSFER_FROM` but one into
+  the router, in step order, gives three lines: `Moved from the sender`, the
+  amount it moves, for example `1000000.0000 USDT`; `Token moved`, giving the
+  token's address as the `Token In` line does; and `Moved to`, which reads
   `The V2 pair the next swap spends` for a hop and `The sender` for `address(1)`
   on every router but `UniversalRouterV1`, and otherwise gives the address. A
   move into the router needs none of them, because its `Paid to` line and
   `Token moved into the router` line already give the amount, the token and
   where it goes, and so its amount is shown once. These lines change neither the
   `Paid to` lines nor the minimum's label. A step goes unread when its recipient
-  does not decode as an address, or when it is a command the decoder does not
-  read: every command other than `PERMIT2_PERMIT`, `PERMIT2_TRANSFER_FROM`,
-  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`, `V4_SWAP`,
-  `SWEEP`, `TRANSFER`, `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`,
-  `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
-  (`V3_SWAP_EXACT_OUT`, `PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and
-  the NFT commands among them), or a type its release names no command for.
+  does not decode as an address, when it is a V3 swap step whose path is shorter
+  than one token address or has bytes after its last hop, or when it is a
+  command the decoder does not read: every command other than `PERMIT2_PERMIT`,
+  `PERMIT2_TRANSFER_FROM`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`,
+  `V3_SWAP_EXACT_IN`, `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`,
+  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`,
+  `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  (`PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and the NFT commands among
+  them), or a type its release names no command for.
 
 ### Non-Goals Forever
 

src/popup/index.html

@@ -90,7 +90,7 @@
                 <div id="add-wallet-section-mnemonic">
                     <!-- The die button shares the instruction's row: on a row
                          of its own it pushes Import below the fold at
-                         360x600. -->
+                         396x600. -->
                     <div class="mb-2 flex justify-between items-start gap-2">
                         <p>
                             Enter your 12 or 24 word recovery phrase below, or
@@ -212,7 +212,7 @@
                     />
                 </div>
                 <!-- The error line sits beside Import, not above it: at
-                     360x600 the button already starts near the bottom of
+                     396x600 the button already starts near the bottom of
                      the popup, and a line of its own would push it below
                      the fold. The longest error fits on one line here. -->
                 <div class="flex items-center gap-2">

src/popup/viewRouter.js

@@ -145,12 +145,15 @@ function isRenderablePendingTx(value) {
 
 // The stored transaction transactionDetail.render() shows. contractAddress is
 // optional on an ETH transfer, and reaches addressDotHtml() when it is there.
+// `chainId` picks the network whose explorer the links open and whose
+// Blockscout the transaction is read from, so it has to name one.
 function isRenderableTx(value) {
     return (
         isRecord(value) &&
         isAddressText(value.from) &&
         isAddressText(value.to) &&
-        (!value.contractAddress || isAddressText(value.contractAddress))
+        (!value.contractAddress || isAddressText(value.contractAddress)) &&
+        SUPPORTED_CHAIN_IDS.has(value.chainId)
     );
 }
 
@@ -202,11 +205,19 @@ function renderView(view, state, views) {
             if (!data.hash) return false;
             if (!isAddressText(data.to)) return false;
             if (!isRenderableDecoded(data.decoded)) return false;
+            // `chainId` picks the network whose explorer the links open, so
+            // when it is there it has to name one. Likewise on error-tx.
+            if (data.chainId && !SUPPORTED_CHAIN_IDS.has(data.chainId)) {
+                return false;
+            }
             views.txStatus.renderSuccess();
             return true;
         case "error-tx":
             if (!data.message) return false;
             if (!isAddressText(data.to)) return false;
+            if (data.chainId && !SUPPORTED_CHAIN_IDS.has(data.chainId)) {
+                return false;
+            }
             views.txStatus.renderError();
             return true;
         default:

src/popup/views/approval.js

@@ -11,6 +11,7 @@ const {
     onViewLeave,
     formatFee,
     tokenLabel,
+    tokenSourcesByChainId,
 } = require("./helpers");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const {
@@ -57,9 +58,15 @@ const { notify, runtimeApi, sendMessage } = require("../../shared/browserApi");
 
 const erc20Iface = new Interface(ERC20_ABI);
 
-function approvalAddressHtml(address) {
+// The link opens the explorer of the network with `chainId`, or of the active
+// network when none is given. A chain id that names no network has no
+// explorer, so the address is drawn without a link.
+function approvalAddressHtml(address, chainId) {
     const title = addressTitle(address, state.wallets);
-    return renderAddressHtml(address, { title });
+    if (chainId && !networkByChainId(chainId)) {
+        return renderAddressHtml(address, { title, noLink: true });
+    }
+    return renderAddressHtml(address, { title, chainId });
 }
 
 // The amount line for a decoded ERC-20 call. With a known scale it is the
@@ -85,13 +92,12 @@ function tokenAmountText(rawAmount, decimals, symbol) {
 function decodeCalldata(data, toAddress, chainId, fromAddress) {
     if (!data || data === "0x" || data.length < 10) return null;
 
-    // Where a token's scale is looked for, for every decoder below: the ERC-20
-    // amount line and the swap's Amount and Min. received lines resolve it the
-    // same way, and refuse to format the same way when it is nowhere.
-    const decimalsSources = {
-        trackedTokens: state.trackedTokens,
-        wallets: state.wallets,
-    };
+    // Where a token's name and scale are looked for, for every decoder below:
+    // what the wallet knows of the tokens on the network with `chainId`, which
+    // need not be the active one. The ERC-20 amount line and the swap's Amount
+    // and Min. received lines resolve the scale the same way, and refuse to
+    // format the same way when it is nowhere.
+    const decimalsSources = tokenSourcesByChainId(chainId);
 
     // Try ERC-20 (approve / transfer)
     try {
@@ -225,10 +231,11 @@ function showTxFee(approvedTx) {
     const feePerGas = BigInt(approvedTx.maxFeePerGas || approvedTx.gasPrice);
     // Through formatFee(), as the confirmation screen's fee is, so the same
     // fee reads the same on both. In the native currency of the network shown
-    // above, as the value is.
+    // above, and at the price on it, as the value is.
     $("approve-tx-fee").textContent = formatFee(
         gasLimit * feePerGas,
         nativeCurrencyByChainId(approvedTx.chainId),
+        approvedTx.chainId,
     );
 
     let detail =
@@ -261,10 +268,7 @@ function showTxApproval(details) {
 
     const toAddr = approvedTx.to;
     const ethValue = formatEther(approvedTx.value || "0");
-    const sources = {
-        trackedTokens: state.trackedTokens,
-        wallets: state.wallets,
-    };
+    const sources = tokenSourcesByChainId(approvedTx.chainId);
 
     // Build txInfo for status screens
     pendingTxDetails = {
@@ -341,27 +345,35 @@ function showTxApproval(details) {
         };
     }
 
+    // Every address link on this screen opens the explorer of the network the
+    // transaction is for, which the Network line names, whichever network is
+    // active.
     $("approve-tx-origin").textContent = details.origin;
-    $("approve-tx-from").innerHTML = approvalAddressHtml(details.approvedFrom);
+    $("approve-tx-from").innerHTML = approvalAddressHtml(
+        details.approvedFrom,
+        approvedTx.chainId,
+    );
 
-    // Show token symbol next to contract address if known
-    const symbol = toAddr ? tokenLabel(toAddr) : null;
+    // Show token symbol next to contract address if known on the network the
+    // transaction is for
+    const symbol = toAddr ? tokenLabel(toAddr, approvedTx.chainId) : null;
     if (toAddr) {
         let toHtml = "";
         if (symbol) {
             toHtml += `<div class="font-bold mb-1">${escapeHtml(symbol)}</div>`;
         }
-        toHtml += approvalAddressHtml(toAddr);
+        toHtml += approvalAddressHtml(toAddr, approvedTx.chainId);
         $("approve-tx-to").innerHTML = toHtml;
     } else {
         $("approve-tx-to").innerHTML = escapeHtml(CONTRACT_CREATION_TEXT);
     }
 
-    const ethValueFormatted = formatTxValue(
-        formatEther(approvedTx.value || "0"),
-    );
-    const ethPrice = getPrice("ETH");
-    const ethUsd = ethPrice ? parseFloat(ethValueFormatted) * ethPrice : null;
+    const ethValueFormatted = formatTxValue(ethValue);
+    // Priced from the exact value, not the four-decimal figure, at the price
+    // on the network the transaction is for, as the confirmation screen prices
+    // its amount, so the same value reads the same on both.
+    const ethPrice = getPrice("ETH", approvedTx.chainId);
+    const ethUsd = ethPrice ? parseFloat(ethValue) * ethPrice : null;
     const usdStr = formatUsd(ethUsd);
     // In the native currency of the network the transaction is for, which the
     // Network line names, not the active network's: the active network can
@@ -388,9 +400,12 @@ function showTxApproval(details) {
             detailsHtml += `<div class="text-muted">${escapeHtml(d.label)}</div>`;
             if (d.address) {
                 if (d.isToken) {
-                    detailsHtml += `<div class="font-bold">${escapeHtml(tokenLabel(d.address) || "Unknown token")}</div>`;
+                    detailsHtml += `<div class="font-bold">${escapeHtml(tokenLabel(d.address, approvedTx.chainId) || "Unknown token")}</div>`;
                 }
-                detailsHtml += approvalAddressHtml(d.address);
+                detailsHtml += approvalAddressHtml(
+                    d.address,
+                    approvedTx.chainId,
+                );
             } else {
                 detailsHtml += `<div class="font-bold">${escapeHtml(d.value)}</div>`;
             }

src/popup/views/confirmTx.js

@@ -23,12 +23,10 @@ const {
     goBack,
     onViewLeave,
     formatFee,
+    reviewedNetworkProvider,
 } = require("./helpers");
 const { state, currentNetwork } = require("../../shared/state");
-const {
-    networkByChainId,
-    nativeCurrencyByChainId,
-} = require("../../shared/networks");
+const { nativeCurrencyByChainId } = require("../../shared/networks");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { walletDefect } = require("../../shared/walletDefects");
 const { decryptWithPassword } = require("../../shared/vault");
@@ -458,20 +456,6 @@ function setVisible(id, visible) {
     $(id).style.visibility = visible ? "visible" : "hidden";
 }
 
-// The node of the network this transaction was reviewed for, which need not be
-// the active one: the popup can reopen onto this screen after Settings switched
-// the network. Its RPC URL is the one Settings has for that network: the
-// active network's is state.rpcUrl, any other's the one remembered for it (see
-// applyChainSwitchFields()).
-function reviewedNetworkProvider(txInfo) {
-    const net = networkByChainId(txInfo.chainId);
-    if (net.id === state.networkId) {
-        return getProvider(state.rpcUrl, net.id);
-    }
-    const remembered = state.networkEndpoints[net.id] || {};
-    return getProvider(remembered.rpcUrl || net.defaultRpcUrl, net.id);
-}
-
 async function estimateGas(txInfo) {
     try {
         const provider = reviewedNetworkProvider(txInfo);

src/popup/views/helpers.js

@@ -1,4 +1,7 @@
-// Shared DOM helpers used by all views.
+// Helpers the views in this directory share: showing a view and going back,
+// error and flash lines and the warning banners, formatting of amounts, fees,
+// balances, addresses and dates, the RPC and Blockscout URLs, node and tokens
+// of the network a chain id names, explorer links, and click-to-copy.
 //
 // Escaping rule for every view in this directory, since they all build
 // markup by concatenation: any VALUE interpolated into an innerHTML string
@@ -19,6 +22,7 @@ const {
     isBelowOneMillionth,
 } = require("../../shared/amountDisplay");
 const { resolveTokenSymbol } = require("../../shared/approvalAmount");
+const { getProvider } = require("../../shared/balances");
 const { DEBUG } = require("../../shared/constants");
 const { escapeHtml } = require("../../shared/html");
 const { isDebug } = require("../../shared/log");
@@ -296,15 +300,30 @@ function nativeCurrency() {
     return currentNetwork().nativeCurrency;
 }
 
-// The symbol shown for a token line, resolved from the bundled list, the
-// tokens the user tracks, and the explorer's report — the same chain the
-// amount line's scale comes from. Null when no source names one, so the token
-// lines keep saying `Unknown token` for a token nothing knows.
-function tokenLabel(address) {
-    return resolveTokenSymbol(address, {
-        trackedTokens: state.trackedTokens,
-        wallets: state.wallets,
-    });
+// What the wallet knows of the tokens on the network with this chain id, or
+// on the active network when no chain id is given, as the `sources` that
+// resolveTokenSymbol() and resolveTokenDecimals() take. A contract address
+// names a token on one network only, and every token balance held is the
+// active network's, so another network gets the tokens tracked on it
+// (state.networkTrackedTokens, see applyChainSwitchFields()) and no balances.
+function tokenSourcesByChainId(chainId) {
+    const net = chainId ? networkByChainId(chainId) : currentNetwork();
+    if (net && net.id === state.networkId) {
+        return { trackedTokens: state.trackedTokens, wallets: state.wallets };
+    }
+    return {
+        trackedTokens: (net && state.networkTrackedTokens[net.id]) || [],
+        wallets: [],
+    };
+}
+
+// The symbol shown for a token line on the network with `chainId`, or on the
+// active network when none is given: from the bundled list, the tokens the
+// user tracks, and the explorer's report, the sources the amount line's scale
+// comes from. Null when no source names one, so the token lines keep saying
+// `Unknown token` for a token nothing knows.
+function tokenLabel(address, chainId) {
+    return resolveTokenSymbol(address, tokenSourcesByChainId(chainId));
 }
 
 // A network fee in wei as the confirmation and approval screens both show it:
@@ -607,6 +626,30 @@ const EXT_ICON =
     `<path d="M7 1.5h3.5V5M7 5.5L10.5 1.5"/>` +
     `</svg></span>`;
 
+// The RPC and Blockscout URLs Settings has for the network with this chain id,
+// which need not be the active one: ConfirmTx, WaitTx and TransactionDetail
+// use the network their transaction's chain id names, and the popup can reopen
+// onto them after Settings switched the network. The active network's are
+// state.rpcUrl and state.blockscoutUrl, any other's the ones remembered for it,
+// or its defaults (see applyChainSwitchFields()).
+function endpointsByChainId(chainId) {
+    const net = networkByChainId(chainId);
+    if (net.id === state.networkId) {
+        return { rpcUrl: state.rpcUrl, blockscoutUrl: state.blockscoutUrl };
+    }
+    const remembered = state.networkEndpoints[net.id] || {};
+    return {
+        rpcUrl: remembered.rpcUrl || net.defaultRpcUrl,
+        blockscoutUrl: remembered.blockscoutUrl || net.defaultBlockscoutUrl,
+    };
+}
+
+// The node of the network a transaction was reviewed for.
+function reviewedNetworkProvider(txInfo) {
+    const net = networkByChainId(txInfo.chainId);
+    return getProvider(endpointsByChainId(txInfo.chainId).rpcUrl, net.id);
+}
+
 // Block-explorer URLs. The origin is a per-network constant from
 // src/shared/networks.js, the explorer of the network with `chainId`, or of
 // the active network when no chain id is given; only the path segment is
@@ -747,6 +790,7 @@ module.exports = {
     keyMaterialName,
     unknownableAmount,
     nativeCurrency,
+    tokenSourcesByChainId,
     tokenLabel,
     formatFee,
     addressDotHtml,
@@ -762,6 +806,8 @@ module.exports = {
     attachCopyHandlers,
     etherscanLinkHtml,
     explorerUrl,
+    endpointsByChainId,
+    reviewedNetworkProvider,
     EXT_ICON,
     truncateMiddle,
     isoDate,

src/popup/views/transactionDetail.js

@@ -18,10 +18,11 @@ const {
     copyableHtml,
     etherscanLinkHtml,
     explorerUrl,
+    endpointsByChainId,
     displaySymbol,
     goBack,
 } = require("./helpers");
-const { state, currentNetwork } = require("../../shared/state");
+const { state } = require("../../shared/state");
 const { nativeCurrencyByChainId } = require("../../shared/networks");
 const { formatEther, formatUnits } = require("ethers");
 const { log, debugFetch } = require("../../shared/log");
@@ -48,16 +49,16 @@ function getTransactionType(tx) {
     return "Native " + nativeCurrencyByChainId(tx.chainId) + " Transfer";
 }
 
-function txAddressHtml(address, ensName, title) {
+function txAddressHtml(address, ensName, title, chainId) {
     const blockie = blockieHtml(address);
     return (
         `<div class="mb-1">${blockie}</div>` +
-        renderAddressHtml(address, { title, ensName })
+        renderAddressHtml(address, { title, ensName, chainId })
     );
 }
 
-function txHashHtml(hash) {
-    const link = explorerUrl("tx", hash);
+function txHashHtml(hash, chainId) {
+    const link = explorerUrl("tx", hash, chainId);
     const extLink = etherscanLinkHtml(link);
     return copyableHtml(hash, "break-all") + extLink;
 }
@@ -83,10 +84,11 @@ function show(tx) {
             method: tx.method || null,
             contractAddress: tx.contractAddress || null,
             // The network the history entry was read from. The type line and
-            // the fee are in its native currency, not the active network's:
-            // the active network can change, in Settings or when the user
-            // approves a site's request, before a later popup shows this
-            // screen again.
+            // the fee are in its native currency, not the active network's,
+            // the links open its explorer, and the block, network details and
+            // calldata are read from its Blockscout: the active network can
+            // change, in Settings or when the user approves a site's request,
+            // before a later popup shows this screen again.
             chainId: tx.chainId,
         },
     };
@@ -96,18 +98,24 @@ function show(tx) {
 function render() {
     const tx = state.viewData.tx;
     if (!tx) return;
-    $("tx-detail-hash").innerHTML = txHashHtml(tx.hash);
+    $("tx-detail-hash").innerHTML = txHashHtml(tx.hash, tx.chainId);
 
     const fromTitle = addressTitle(tx.from, state.wallets);
     $("tx-detail-from").innerHTML = txAddressHtml(
         tx.from,
         tx.fromEns,
         fromTitle,
+        tx.chainId,
     );
     // A contract creation has no recipient: transactions.js gives it `to: ""`.
     if (tx.to) {
         const toTitle = addressTitle(tx.to, state.wallets);
-        $("tx-detail-to").innerHTML = txAddressHtml(tx.to, tx.toEns, toTitle);
+        $("tx-detail-to").innerHTML = txAddressHtml(
+            tx.to,
+            tx.toEns,
+            toTitle,
+            tx.chainId,
+        );
     } else {
         $("tx-detail-to").innerHTML = escapeHtml(CONTRACT_CREATION_TEXT);
     }
@@ -146,7 +154,7 @@ function render() {
     if (tokenContractSection && tokenContractEl) {
         if (tx.contractAddress) {
             const dot = addressDotHtml(tx.contractAddress);
-            const link = explorerUrl("token", tx.contractAddress);
+            const link = explorerUrl("token", tx.contractAddress, tx.chainId);
             // Hand-rolled rather than renderAddressHtml() because the
             // link goes to the explorer's /token/ page, not /address/.
             // Same two-row shape though: dot and link on the strip, the
@@ -204,7 +212,11 @@ function showDetailField(sectionId, contentId, value) {
 function populateOnChainDetails(txData, chainId) {
     // Block number
     if (txData.block_number != null) {
-        const blockLink = explorerUrl("block", String(txData.block_number));
+        const blockLink = explorerUrl(
+            "block",
+            String(txData.block_number),
+            chainId,
+        );
         const blockSection = $("tx-detail-block-section");
         const blockEl = $("tx-detail-block");
         if (blockSection && blockEl) {
@@ -301,8 +313,9 @@ async function loadFullTxDetails(txHash, chainId) {
     if (!section || !actionEl || !detailsEl) return;
 
     try {
+        const { blockscoutUrl } = endpointsByChainId(chainId);
         const resp = await debugFetch(
-            state.blockscoutUrl + "/transactions/" + txHash,
+            blockscoutUrl + "/transactions/" + txHash,
         );
         if (!resp.ok) return;
         const txData = await resp.json();
@@ -316,12 +329,12 @@ async function loadFullTxDetails(txHash, chainId) {
         // Decoded against the address the transaction was sent to, as the
         // explorer reports it, not the history entry's `to`: for a token
         // transfer that is the transfer's recipient, not the token contract.
-        // On the active network, the one whose explorer was just asked, and
-        // from the sender it reports.
+        // On the network the transaction was sent on, whose Blockscout was
+        // just asked, and from the sender it reports.
         const decoded = decodeCalldata(
             inputData,
             txData.to?.hash || "",
-            currentNetwork().chainId,
+            chainId,
             txData.from?.hash || "",
         );
         if (decoded) {
@@ -340,9 +353,9 @@ async function loadFullTxDetails(txHash, chainId) {
                     if (tokenSymbol) {
                         detailsHtml += `<div class="font-bold">${escapeHtml(displaySymbol(tokenSymbol))}</div>`;
                     }
-                    detailsHtml += renderAddressHtml(d.address);
+                    detailsHtml += renderAddressHtml(d.address, { chainId });
                 } else if (d.address) {
-                    detailsHtml += renderAddressHtml(d.address);
+                    detailsHtml += renderAddressHtml(d.address, { chainId });
                 } else {
                     detailsHtml += `<div class="font-bold">${escapeHtml(d.value)}</div>`;
                 }

src/popup/views/txStatus.js

@@ -14,10 +14,13 @@ const {
     displaySymbol,
     clearViewStack,
     tokenLabel,
+    reviewedNetworkProvider,
 } = require("./helpers");
 const { state } = require("../../shared/state");
-const { nativeCurrencyByChainId } = require("../../shared/networks");
-const { getProvider } = require("../../shared/balances");
+const {
+    SUPPORTED_CHAIN_IDS,
+    nativeCurrencyByChainId,
+} = require("../../shared/networks");
 const { log } = require("../../shared/log");
 
 // Receipt poll cadence and the deadline after which the wait is reported as
@@ -61,21 +64,22 @@ function endWait() {
 }
 
 // A contract creation reaches these screens with `to` as "" (approval.js
-// writes `to: toAddr || ""`).
-function toAddressHtml(address) {
+// writes `to: toAddr || ""`). The links below open the explorer of the network
+// with `chainId`, or of the active network when none is given.
+function toAddressHtml(address, chainId) {
     if (!address) return escapeHtml(CONTRACT_CREATION_TEXT);
     const title = addressTitle(address, state.wallets);
-    return renderAddressHtml(address, { title });
+    return renderAddressHtml(address, { title, chainId });
 }
 
-function txHashHtml(hash) {
-    const link = explorerUrl("tx", hash);
+function txHashHtml(hash, chainId) {
+    const link = explorerUrl("tx", hash, chainId);
     return copyableHtml(hash, "break-all") + etherscanLinkHtml(link);
 }
 
-function blockNumberHtml(blockNumber) {
+function blockNumberHtml(blockNumber, chainId) {
     const num = String(blockNumber);
-    const link = explorerUrl("block", num);
+    const link = explorerUrl("block", num, chainId);
     return copyableHtml(num) + etherscanLinkHtml(link);
 }
 
@@ -91,9 +95,11 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
     // native currency of txInfo.chainId, the network the transaction was sent
     // on, not the active network's: the active network can change, in
     // Settings or when the user approves a site's request, while this screen
-    // is open or before a later popup resumes it. A null token is a swap whose
-    // amount was not decoded (see showTxApproval() in approval.js): the amount
-    // says so, and no symbol follows it.
+    // is open or before a later popup resumes it. The links on all three
+    // screens open that network's explorer, and this screen's receipt is
+    // asked of that network's node, for the same reason. A null token is a
+    // swap whose amount was not decoded (see showTxApproval() in
+    // approval.js): the amount says so, and no symbol follows it.
     let symbol = "";
     if (txInfo.token === "ETH") {
         symbol = nativeCurrencyByChainId(txInfo.chainId);
@@ -102,8 +108,8 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
     }
     $("wait-tx-summary").textContent =
         txInfo.amount + (symbol ? " " + symbol : "");
-    $("wait-tx-to").innerHTML = toAddressHtml(txInfo.to);
-    $("wait-tx-hash").innerHTML = txHashHtml(txHash);
+    $("wait-tx-to").innerHTML = toAddressHtml(txInfo.to, txInfo.chainId);
+    $("wait-tx-hash").innerHTML = txHashHtml(txHash, txInfo.chainId);
     attachCopyHandlers("view-wait-tx");
 
     // Persisted so closing and reopening the popup resumes this wait
@@ -128,7 +134,7 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
         renderElapsed();
     }, 1000);
 
-    const provider = getProvider(state.rpcUrl, state.networkId);
+    const provider = reviewedNetworkProvider(txInfo);
     let consecutiveFailures = 0;
 
     async function poll() {
@@ -207,10 +213,11 @@ function showWait(txInfo, txHash) {
 // an object merely missing one of them throws a TypeError out of
 // restoreView() — which init() does not guard, skipping the rest of popup
 // init and leaving wait-tx on screen with no back control. A non-numeric
-// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.token,
-// txInfo.tokenSymbol and txInfo.chainId are deliberately unchecked: they are
-// compared and coalesced rather than dereferenced, and tokenSymbol is null for
-// ETH.
+// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.chainId picks
+// the node the receipt is asked of and the explorer the links open, so it has
+// to name a network. txInfo.token and txInfo.tokenSymbol are deliberately
+// unchecked: they are compared and coalesced rather than dereferenced, and
+// tokenSymbol is null for ETH.
 function restoreWait() {
     const d = state.viewData;
     if (!d || !d.pendingWait) return false;
@@ -226,6 +233,7 @@ function restoreWait() {
     // path itself created.
     if (typeof info.to !== "string") return false;
     if (typeof info.amount !== "string") return false;
+    if (!SUPPORTED_CHAIN_IDS.has(info.chainId)) return false;
     if (typeof w.broadcastTime !== "number" || !isFinite(w.broadcastTime)) {
         return false;
     }
@@ -250,12 +258,13 @@ function showSuccess(txInfo, txHash, blockNumber) {
         hash: txHash,
         blockNumber: blockNumber,
         decoded: txInfo.decoded || null,
+        chainId: txInfo.chainId,
     };
     renderSuccess();
     ctx.doRefreshAndRender();
 }
 
-function decodedDetailsHtml(decoded) {
+function decodedDetailsHtml(decoded, chainId) {
     if (!decoded || !decoded.details) return "";
     let html = `<div class="border border-border border-dashed p-2 mb-3">`;
     if (decoded.name) {
@@ -271,11 +280,11 @@ function decodedDetailsHtml(decoded) {
         html += `<div class="text-xs text-muted mb-1">${escapeHtml(d.label)}</div>`;
         if (d.address) {
             if (d.isToken) {
-                const sym = tokenLabel(d.address) || "Unknown token";
+                const sym = tokenLabel(d.address, chainId) || "Unknown token";
                 html += `<div class="font-bold">${escapeHtml(sym)}</div>`;
-                html += toAddressHtml(d.address);
+                html += toAddressHtml(d.address, chainId);
             } else {
-                html += toAddressHtml(d.address);
+                html += toAddressHtml(d.address, chainId);
             }
         } else {
             html += `<div class="font-bold">${escapeHtml(d.value)}</div>`;
@@ -304,16 +313,16 @@ function renderSuccess() {
         toSection.classList.remove("hidden");
         $("success-tx-summary").textContent =
             d.amount + (d.symbol ? " " + d.symbol : "");
-        $("success-tx-to").innerHTML = toAddressHtml(d.to);
+        $("success-tx-to").innerHTML = toAddressHtml(d.to, d.chainId);
     }
 
-    $("success-tx-block").innerHTML = blockNumberHtml(d.blockNumber);
-    $("success-tx-hash").innerHTML = txHashHtml(d.hash);
+    $("success-tx-block").innerHTML = blockNumberHtml(d.blockNumber, d.chainId);
+    $("success-tx-hash").innerHTML = txHashHtml(d.hash, d.chainId);
 
     // Show decoded calldata details if present
     const decodedEl = $("success-tx-decoded");
     if (decodedEl && hasDecoded) {
-        decodedEl.innerHTML = decodedDetailsHtml(d.decoded);
+        decodedEl.innerHTML = decodedDetailsHtml(d.decoded, d.chainId);
         decodedEl.classList.remove("hidden");
     } else if (decodedEl) {
         decodedEl.classList.add("hidden");
@@ -339,6 +348,7 @@ function showError(txInfo, txHash, message) {
         to: txInfo.to,
         hash: txHash || null,
         message: message,
+        chainId: txInfo.chainId,
     };
     renderError();
 }
@@ -348,11 +358,11 @@ function renderError() {
     if (!d || !d.message) return;
     $("error-tx-summary").textContent =
         d.amount + (d.symbol ? " " + d.symbol : "");
-    $("error-tx-to").innerHTML = toAddressHtml(d.to);
+    $("error-tx-to").innerHTML = toAddressHtml(d.to, d.chainId);
     $("error-tx-message").textContent = d.message;
 
     if (d.hash) {
-        $("error-tx-hash").innerHTML = txHashHtml(d.hash);
+        $("error-tx-hash").innerHTML = txHashHtml(d.hash, d.chainId);
         $("error-tx-hash-section").classList.remove("hidden");
         attachCopyHandlers("view-error-tx");
     } else {

src/shared/prices.js

@@ -38,11 +38,12 @@ function clearPrices() {
 }
 
 // Return the USD price for a symbol on the network with `chainId`, or on the
-// active network when no chain id is given; null on testnet / unknown.
+// active network when no chain id is given; null on testnet, on a chain id
+// that names no network, or for a symbol with no price.
 function getPrice(symbol, chainId) {
     const { currentNetwork } = require("./state");
     const network = chainId ? networkByChainId(chainId) : currentNetwork();
-    if (network.isTestnet) return null;
+    if (!network || network.isTestnet) return null;
     return prices[symbol] || null;
 }
 

src/shared/transactions.js

@@ -20,6 +20,7 @@ const { toDecimals } = require("./transferAmount");
 // truncation without the approval screens' nonzero floor: the transaction
 // detail view is the authoritative record and already shows exact precision.
 const { truncateAmount: formatTxValue } = require("./amountDisplay");
+const { routerRelease } = require("./uniswap");
 
 // Ethereum addresses are case-insensitive: EIP-55 mixed case is a checksum
 // over the address, not part of its identity.  Every address comparison in
@@ -51,7 +52,6 @@ function parseTx(tx, addrLower, chainId) {
         }
         // Map known DEX methods to "Swap" for cleaner display
         const SWAP_METHODS = new Set([
-            "execute",
             "swap",
             "swapExactTokensForTokens",
             "swapTokensForExactTokens",
@@ -59,9 +59,16 @@ function parseTx(tx, addrLower, chainId) {
             "swapTokensForExactETH",
             "swapExactTokensForETH",
             "swapETHForExactTokens",
-            "multicall",
         ]);
-        const label = SWAP_METHODS.has(method)
+        // Multisigs, smart accounts and many other contracts also have an
+        // `execute` or `multicall` method, so either is a swap only when sent
+        // to a Universal Router on this transaction's network: the same
+        // addresses the approval screen decodes a swap for.
+        const isSwap =
+            SWAP_METHODS.has(method) ||
+            ((method === "execute" || method === "multicall") &&
+                routerRelease(to, chainId) !== null);
+        const label = isSwap
             ? "Swap"
             : method.charAt(0).toUpperCase() + method.slice(1);
         direction = "contract";

tests/approvalTokenNetwork.test.js

@@ -0,0 +1,270 @@
+// The approval screen for a site's Sepolia token transfer while Ethereum
+// Mainnet is active.
+//
+// The screen named the token, and scaled its amount, from the active network's
+// tracked tokens and balances, so a token the wallet tracks on Sepolia read as
+// an unknown token with its amount in base units, and the screens after it
+// labelled the amount `?` (https://git.eeqj.de/sneak/AutistMask/issues/629).
+// It now uses what the wallet knows of the tokens on the network the
+// transaction is for.
+//
+// Its address links opened the active network's explorer
+// (https://git.eeqj.de/sneak/AutistMask/issues/631). They now open the
+// explorer of the network the transaction is for.
+//
+// Driven through the real approval screen, password and Confirm included,
+// against a minimal DOM stub in the shape tests/swapStatusAmount.test.js uses.
+// The vault is mocked so that no password has to be hashed.
+
+jest.mock("../src/shared/vault", () => ({
+    decryptWithPassword: jest.fn(),
+}));
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const { Interface } = require("ethers");
+const { state } = require("../src/shared/state");
+const { NETWORKS } = require("../src/shared/networks");
+const { decryptWithPassword } = require("../src/shared/vault");
+const approval = require("../src/popup/views/approval");
+const txStatus = require("../src/popup/views/txStatus");
+
+// A well-known test phrase, and its first address.
+const PHRASE = "test test test test test test test test test test test junk";
+const FROM = "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266";
+const RECIPIENT = "0x711e691962E5c054b78071C789A0C8CE657377aD";
+// A token the bundled token list does not name.
+const TOKEN = "0x74de5d4FCbf63E00296fd95d33236B9794016631";
+
+// FROM sends 1234.5 of the 6-decimal token to RECIPIENT.
+const TRANSFER_DATA = new Interface([
+    "function transfer(address to, uint256 amount)",
+]).encodeFunctionData("transfer", [RECIPIENT, 1234500000n]);
+
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        value: "",
+        innerHTML: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        listeners: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: (n, force) => {
+                const on = force === undefined ? !classes.has(n) : force;
+                if (on) classes.add(n);
+                else classes.delete(n);
+                return on;
+            },
+        },
+        addEventListener: (name, fn) => {
+            el.listeners[name] = el.listeners[name] || [];
+            el.listeners[name].push(fn);
+        },
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+function click(id) {
+    return Promise.all((node(id).listeners.click || []).map((fn) => fn()));
+}
+
+// One line of the decoded details: its label and what is drawn under it.
+function decodedLine(label) {
+    return node("approve-tx-decoded-details")
+        .innerHTML.split('<div class="mb-2">')
+        .find((line) =>
+            line.startsWith(`<div class="text-muted">${label}</div>`),
+        );
+}
+
+// Open the approval screen, with Ethereum Mainnet active and FROM holding
+// `tokenBalances` there, for the site's transaction sending TRANSFER_DATA to
+// the token, on Sepolia unless `chainId` names another chain. Confirm answers
+// the signed transaction with a failure, which leads to the error screen.
+async function showTokenTransfer(
+    tokenBalances = [],
+    chainId = NETWORKS.sepolia.chainId,
+) {
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" }, close: () => {} };
+    globalThis.chrome.runtime = {
+        connect: () => ({ postMessage: () => {} }),
+        sendMessage: (msg, reply) => {
+            if (!reply) return;
+            if (msg.type !== "AUTISTMASK_GET_APPROVAL") {
+                return reply({
+                    error: "The transaction could not be sent.",
+                    retryable: false,
+                });
+            }
+            reply({
+                type: "tx",
+                origin: "https://dapp.example",
+                isPhishingDomain: false,
+                approvedFrom: FROM,
+                approvedTx: {
+                    type: 2,
+                    from: FROM,
+                    chainId,
+                    nonce: "0x7",
+                    gasLimit: "0x30d40",
+                    maxPriorityFeePerGas: "0x3b9aca00",
+                    maxFeePerGas: "0x77359400",
+                    to: TOKEN,
+                    value: "0x0",
+                    data: TRANSFER_DATA,
+                    accessList: [],
+                },
+            });
+        },
+    };
+    state.networkId = "mainnet";
+    state.activeAddress = FROM;
+    state.wallets = [
+        {
+            type: "hd",
+            name: "Wallet 1",
+            xpub: "xpub-wallet-1",
+            encryptedSecret: "encrypted-secret-1",
+            nextIndex: 1,
+            addresses: [
+                { address: FROM, index: 0, balance: "0", tokenBalances },
+            ],
+        },
+    ];
+    state.currentView = null;
+    txStatus.init({ doRefreshAndRender: () => {} });
+    approval.init({});
+    await approval.show(1);
+}
+
+async function confirm() {
+    decryptWithPassword.mockResolvedValue(PHRASE);
+    node("approve-tx-password").value = "any password";
+    await click("btn-approve-tx");
+}
+
+beforeEach(() => {
+    state.trackedTokens = [];
+    state.networkTrackedTokens = {};
+});
+
+describe("a token tracked on Sepolia only", () => {
+    beforeEach(() => {
+        state.networkTrackedTokens = {
+            sepolia: [{ address: TOKEN, symbol: "TDOL", decimals: 6 }],
+        };
+    });
+
+    test("is named on the Contract line and the decoded Token line, with its amount at its scale", async () => {
+        await showTokenTransfer();
+        expect(node("approve-tx-to").innerHTML).toContain(
+            '<div class="font-bold mb-1">TDOL</div>',
+        );
+        expect(decodedLine("Token")).toContain(
+            '<div class="font-bold">TDOL</div>',
+        );
+        expect(decodedLine("Amount")).toContain(
+            '<div class="font-bold">1234.5000 TDOL</div>',
+        );
+    });
+
+    test("labels the amount on the error screen that follows", async () => {
+        await showTokenTransfer();
+        await confirm();
+        expect(state.currentView).toBe("error-tx");
+        expect(node("error-tx-summary").textContent).toBe("1234.5000 TDOL");
+    });
+});
+
+// The same contract address on mainnet is another token, so what the wallet
+// tracks and holds there names nothing on Sepolia.
+test("a token tracked and held on mainnet only is not named, and its amount is in base units", async () => {
+    state.trackedTokens = [{ address: TOKEN, symbol: "MDOL", decimals: 18 }];
+    await showTokenTransfer([
+        { address: TOKEN, symbol: "MDOL", decimals: 18, balance: "1.0" },
+    ]);
+    expect(node("approve-tx-to").innerHTML).not.toContain("MDOL");
+    expect(decodedLine("Token")).toContain(
+        '<div class="font-bold">Unknown token</div>',
+    );
+    expect(decodedLine("Amount")).toContain(
+        '<div class="font-bold">1234500000 base units (decimals unknown)</div>',
+    );
+});
+
+// The From and Contract lines, and the decoded Token and Recipient lines.
+test("every address links to the Sepolia explorer", async () => {
+    await showTokenTransfer();
+    const sepolia = NETWORKS.sepolia.explorerUrl;
+    expect(node("approve-tx-from").innerHTML).toContain(
+        `href="${sepolia}/address/${FROM}"`,
+    );
+    expect(node("approve-tx-to").innerHTML).toContain(
+        `href="${sepolia}/address/${TOKEN}"`,
+    );
+    expect(decodedLine("Token")).toContain(
+        `href="${sepolia}/address/${TOKEN}"`,
+    );
+    expect(decodedLine("Recipient")).toContain(
+        `href="${sepolia}/address/${RECIPIENT}"`,
+    );
+    for (const id of [
+        "approve-tx-from",
+        "approve-tx-to",
+        "approve-tx-decoded-details",
+    ]) {
+        expect(node(id).innerHTML).not.toContain(NETWORKS.mainnet.explorerUrl);
+    }
+});
+
+// Chain id 1337 names no network here, so it has no explorer to link to.
+test("a transaction on a chain id that names no network is shown with no address links", async () => {
+    await showTokenTransfer([], "0x539");
+    expect(state.currentView).toBe("approve-tx");
+    expect(node("approve-tx-network").textContent).toBe(
+        "Unknown network (chain id 1337)",
+    );
+    expect(node("approve-tx-from").innerHTML).toContain(FROM);
+    for (const id of [
+        "approve-tx-from",
+        "approve-tx-to",
+        "approve-tx-decoded-details",
+    ]) {
+        expect(node(id).innerHTML).not.toContain("href=");
+    }
+});

tests/approvalValueUsd.test.js

@@ -0,0 +1,192 @@
+// The USD value on the approval screen's Value and Network fee lines, for a
+// site's ETH send.
+//
+// It was worked out from the four-decimal figure the line shows, at the price
+// on the active network, so the same value read a few cents different here than
+// on the confirmation screen, which prices the exact amount at the price on the
+// transaction's own network, and a transaction on another network than the
+// active one was priced at the active one's rate, its fee too
+// (https://git.eeqj.de/sneak/AutistMask/issues/614).
+//
+// Driven through the real approval screen, against a minimal DOM stub in the
+// shape tests/approvalTokenNetwork.test.js uses.
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const { state } = require("../src/shared/state");
+const { NETWORKS } = require("../src/shared/networks");
+const { prices, clearPrices } = require("../src/shared/prices");
+const approval = require("../src/popup/views/approval");
+
+const FROM = "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266";
+const RECIPIENT = "0x711e691962E5c054b78071C789A0C8CE657377aD";
+
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        value: "",
+        innerHTML: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        listeners: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: (n, force) => {
+                const on = force === undefined ? !classes.has(n) : force;
+                if (on) classes.add(n);
+                else classes.delete(n);
+                return on;
+            },
+        },
+        addEventListener: (name, fn) => {
+            el.listeners[name] = el.listeners[name] || [];
+            el.listeners[name].push(fn);
+        },
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+// Open the approval screen, with the network `networkId` active, for the
+// site's transaction sending 1.23414 ETH to RECIPIENT on the chain `chainId`.
+async function showEthSend(chainId, networkId) {
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" }, close: () => {} };
+    globalThis.chrome.runtime = {
+        connect: () => ({ postMessage: () => {} }),
+        sendMessage: (msg, reply) => {
+            if (!reply) return;
+            reply({
+                type: "tx",
+                origin: "https://dapp.example",
+                isPhishingDomain: false,
+                approvedFrom: FROM,
+                approvedTx: {
+                    type: 2,
+                    from: FROM,
+                    chainId,
+                    nonce: "0x7",
+                    gasLimit: "0x5208",
+                    maxPriorityFeePerGas: "0x3b9aca00",
+                    maxFeePerGas: "0x77359400",
+                    to: RECIPIENT,
+                    value: "1234140000000000000",
+                    data: "0x",
+                    accessList: [],
+                },
+            });
+        },
+    };
+    state.networkId = networkId;
+    state.activeAddress = FROM;
+    state.wallets = [
+        {
+            type: "hd",
+            name: "Wallet 1",
+            xpub: "xpub-wallet-1",
+            encryptedSecret: "encrypted-secret-1",
+            nextIndex: 1,
+            addresses: [{ address: FROM, index: 0, balance: "0" }],
+        },
+    ];
+    state.trackedTokens = [];
+    state.networkTrackedTokens = {};
+    state.currentView = null;
+    approval.init({});
+    await approval.show(1);
+}
+
+beforeEach(() => {
+    prices.ETH = 2000;
+});
+
+afterEach(() => {
+    clearPrices();
+});
+
+// 1.23414 ETH reads 1.2341 ETH. At $2,000 the exact value is $2,468.28, the
+// figure the confirmation screen shows for it; the shown figure would be
+// $2,468.20.
+test.each([
+    [
+        "a mainnet transaction is priced from its exact value",
+        NETWORKS.mainnet.chainId,
+        "mainnet",
+        "1.2341 ETH ($2,468.28)",
+    ],
+    [
+        "a mainnet transaction shown with Sepolia active is priced at the mainnet price",
+        NETWORKS.mainnet.chainId,
+        "sepolia",
+        "1.2341 ETH ($2,468.28)",
+    ],
+    [
+        "a Sepolia transaction shown with mainnet active has no USD value",
+        NETWORKS.sepolia.chainId,
+        "mainnet",
+        "1.2341 SepoliaETH",
+    ],
+    // Chain id 1337 names no network here, so nothing knows its price.
+    [
+        "a transaction on a chain id that names no network has no USD value",
+        "0x539",
+        "mainnet",
+        "1.2341 ETH",
+    ],
+])("%s", async (_label, chainId, networkId, expected) => {
+    await showEthSend(chainId, networkId);
+    expect(state.currentView).toBe("approve-tx");
+    expect(node("approve-tx-value").textContent).toBe(expected);
+});
+
+// The Network fee line is priced on the transaction's network too. 21000 gas at
+// up to 2 gwei is 0.000042 ETH, $0.08 at $2,000.
+test.each([
+    [
+        "the fee of a mainnet transaction shown with Sepolia active is priced at the mainnet price",
+        NETWORKS.mainnet.chainId,
+        "sepolia",
+        "0.00004 ETH ($0.08)",
+    ],
+    [
+        "the fee of a Sepolia transaction shown with mainnet active has no USD value",
+        NETWORKS.sepolia.chainId,
+        "mainnet",
+        "0.00004 SepoliaETH",
+    ],
+])("%s", async (_label, chainId, networkId, expected) => {
+    await showEthSend(chainId, networkId);
+    expect(state.currentView).toBe("approve-tx");
+    expect(node("approve-tx-fee").textContent).toBe(expected);
+});

tests/backNavigation.test.js

@@ -154,7 +154,14 @@ describe("Back onto a view the reopened popup never rendered", () => {
 
     test("Back onto the transaction detail renders it", () => {
         reopenedOn("settings", ["main", "transaction"], {
-            viewData: { tx: { hash: "0xdead", from: ADDRESS, to: ADDRESS } },
+            viewData: {
+                tx: {
+                    hash: "0xdead",
+                    from: ADDRESS,
+                    to: ADDRESS,
+                    chainId: "0x1",
+                },
+            },
         });
         goBack();
         expect(calls).toEqual(["transactionDetail"]);

tests/contractCreation.test.js

@@ -192,6 +192,7 @@ describe("the wait, success and error screens", () => {
         amount: "0.0000",
         token: "ETH",
         tokenSymbol: null,
+        chainId: "0x1",
     };
     const transfer = { ...creation, to: RECIPIENT };
 

tests/dustThreshold.test.js

@@ -101,7 +101,7 @@ describe("the flash line the message is shown in", () => {
     //
     // The line cuts a message too long for it with an ellipsis (see
     // showFlash() in src/popup/views/helpers.js). The assertions that
-    // measure that, in a real browser at the documented 360x600 popup, are
+    // measure that, in a real browser at the documented 396x600 popup, are
     // "a rejected dust threshold shifts no layout (#233)" and "an over-long
     // flash message keeps to one line (#252)" in tests/e2e/run.js, run by
     // make test-e2e. They are not in make check because REPO_POLICIES.md

tests/e2e/run.js

@@ -60,6 +60,14 @@ const TEST_TIMEOUT_MS = 120000;
 // trailing drain in main().
 const TRAILING_WATCH_MS = 1500;
 
+// The popup's size, as README gives it: `body` in src/popup/styles/main.css
+// is 396px wide, and src/background/index.js opens an approval window at
+// the same 396x600. Pages in this context otherwise get Playwright's
+// 1280x720 default, where the page never scrolls sideways and a button
+// below the popup's fold is still on screen, so a layout measured there
+// passes whatever the page does.
+const POPUP_VIEWPORT = { width: 396, height: 600 };
+
 const tests = [];
 
 function test(name, fn) {
@@ -1885,12 +1893,6 @@ test("a network switch in Settings shows and removes the testnet banner at once
 
 // ------------------------------------------------ dust threshold (#233)
 
-// The popup size README documents the UI as designed for. Pages in this
-// context otherwise get Playwright's 1280x720 default, at which the flash
-// line has room for any plausible message and never wraps — measuring
-// there would pass for every string and prove nothing.
-const POPUP_VIEWPORT = { width: 360, height: 600 };
-
 // Everything below the flash line that must not move when it fills, plus
 // the height of the line itself. Runs in the page.
 //
@@ -2139,7 +2141,7 @@ test("a password error moves nothing on any screen (#297)", async (env) => {
 
 // ------------------------------------------ add wallet Import button (#493)
 
-// At 360x600 the add wallet screen's Import button already starts near the
+// At 396x600 the add wallet screen's Import button already starts near the
 // bottom of the popup, so its password error line sits beside the button
 // rather than above it. Measures the button and the line empty and again
 // filled with the longest error addWallet.js puts there. Runs in the page.
@@ -3431,10 +3433,14 @@ test("six failed receipt lookups in a row end on the unreachable-network message
 // timeout ("<iframe id=\"pwn\"> intercepts pointer events") rather than as
 // anything that names the defect.
 
-// Verbatim from the issue's reproduction.
+// The issue's reproduction, with the frame sized to the popup.
 const HOSTILE_SYMBOL =
     '<iframe id="pwn" src="https://dapp.e2e.test/" ' +
-    'style="position:fixed;left:0;top:0;width:360px;height:600px;z-index:99999"></iframe>';
+    'style="position:fixed;left:0;top:0;width:' +
+    POPUP_VIEWPORT.width +
+    "px;height:" +
+    POPUP_VIEWPORT.height +
+    'px;z-index:99999"></iframe>';
 
 // What a correctly escaped and capped render of it reads as: the first
 // MAX_SYMBOL_LENGTH-1 characters and an ellipsis. Spelled out rather than
@@ -5026,8 +5032,20 @@ function addressRowReport(page) {
     });
 }
 
+// Measured at the popup's 396x600 (POPUP_VIEWPORT). Every page in this
+// context, approval windows included, is otherwise 1280x720 whatever size
+// the extension asks for, and a page that wide never scrolls sideways. The
+// page is then put back to the size it had, so the size a later step runs at
+// does not depend on whether this one ran.
 async function assertAddressesFit(page, where) {
-    const report = await addressRowReport(page);
+    const sizeBefore = page.viewportSize();
+    await page.setViewportSize(POPUP_VIEWPORT);
+    let report;
+    try {
+        report = await addressRowReport(page);
+    } finally {
+        await page.setViewportSize(sizeBefore);
+    }
     assert(
         report.rows.length > 0,
         where + ": no address rows were rendered, so nothing was measured",

tests/persistedFieldContract.test.js

@@ -441,6 +441,17 @@ const CONTRACT = [
                 views: ["error-tx"],
                 restored: false,
             },
+            // A chain id naming no network has no explorer to link to.
+            {
+                value: { hash: "0x1", to: ADDRESS, chainId: "0x5" },
+                views: ["success-tx"],
+                restored: false,
+            },
+            {
+                value: { message: "boom", to: ADDRESS, chainId: "0x5" },
+                views: ["error-tx"],
+                restored: false,
+            },
             // transaction passes on `data.tx`.
             {
                 value: { tx: { hash: "0x1" } },
@@ -454,6 +465,26 @@ const CONTRACT = [
                         from: ADDRESS,
                         to: ADDRESS,
                         contractAddress: 42,
+                        chainId: "0x1",
+                    },
+                },
+                views: ["transaction"],
+                restored: false,
+            },
+            // A transaction whose chain id is missing or names no network has
+            // no explorer to link to and no Blockscout to be read from.
+            {
+                value: { tx: { hash: "0x1", from: ADDRESS, to: ADDRESS } },
+                views: ["transaction"],
+                restored: false,
+            },
+            {
+                value: {
+                    tx: {
+                        hash: "0x1",
+                        from: ADDRESS,
+                        to: ADDRESS,
+                        chainId: "0x5",
                     },
                 },
                 views: ["transaction"],
@@ -812,7 +843,13 @@ const WELL_FORMED_DATA = {
     message: "boom",
     to: ADDRESS,
     decoded: { details: [{ address: TOKEN_ADDRESS }] },
-    tx: { hash: "0x1", from: ADDRESS, to: ADDRESS, contractAddress: null },
+    tx: {
+        hash: "0x1",
+        from: ADDRESS,
+        to: ADDRESS,
+        contractAddress: null,
+        chainId: "0x1",
+    },
     pendingTx: {
         token: "ETH",
         from: ADDRESS,
@@ -821,7 +858,7 @@ const WELL_FORMED_DATA = {
     },
     pendingWait: {
         hash: "0x1",
-        txInfo: { to: ADDRESS, amount: "1" },
+        txInfo: { to: ADDRESS, amount: "1", chainId: "0x1" },
         broadcastTime: BROADCAST_TIME,
     },
 };

tests/popupBoot.test.js

@@ -58,7 +58,7 @@ function restoringOnto(view, viewData) {
 test("the transaction screen's Blockscout request reaches the stub", async () => {
     const page = await bootPopup(
         restoringOnto("transaction", {
-            tx: { hash: "0x1", from: ADDRESS, to: ADDRESS },
+            tx: { hash: "0x1", from: ADDRESS, to: ADDRESS, chainId: "0x1" },
         }),
     );
 

tests/stateRecovery.test.js

@@ -225,7 +225,12 @@ describe("a popup already open when the stored profile becomes unreadable", () =
                 viewData: {
                     pendingWait: {
                         hash: "0x1",
-                        txInfo: { to: ADDRESS, amount: "1", token: "ETH" },
+                        txInfo: {
+                            to: ADDRESS,
+                            amount: "1",
+                            token: "ETH",
+                            chainId: "0x1",
+                        },
                         broadcastTime: Date.now(),
                     },
                 },

tests/tokenTransferDetail.test.js

@@ -8,6 +8,14 @@
 // tracks. It decodes against the address the explorer reports the transaction
 // was sent to.
 //
+// Its links open the explorer of the network the transaction was sent on,
+// whichever network is active
+// (https://git.eeqj.de/sneak/AutistMask/issues/584), and the transaction is
+// read from that network's Blockscout, the one Settings has for it
+// (https://git.eeqj.de/sneak/AutistMask/issues/623). Its decoded details name
+// the token, and scale its amount, from what the wallet knows of that
+// network's tokens (https://git.eeqj.de/sneak/AutistMask/issues/629).
+//
 // The row is the one the real history parser makes from the explorer's answer,
 // opened through transactionDetail.show(), which is what a click on the row
 // calls. Driven against a minimal DOM stub in the shape
@@ -22,10 +30,10 @@ jest.mock("../src/shared/log", () => ({
         warnf: () => {},
         errorf: () => {},
     },
-    debugFetch: async (url) => ({
-        ok: true,
-        json: async () => mockExplorerAnswer(url),
-    }),
+    debugFetch: async (url) => {
+        mockAsked.push(url);
+        return { ok: true, json: async () => mockExplorerAnswer(url) };
+    },
     setRuntimeDebug: () => {},
     isDebug: () => false,
 }));
@@ -35,10 +43,13 @@ globalThis.chrome = {
 };
 
 const { state } = require("../src/shared/state");
+const { NETWORKS } = require("../src/shared/networks");
 const { fetchRecentTransactions } = require("../src/shared/transactions");
 const transactionDetail = require("../src/popup/views/transactionDetail");
 
 const EXPLORER = "https://explorer.example/api/v2";
+// A Blockscout that knows nothing of the transaction.
+const OTHER_EXPLORER = "https://other-explorer.example/api/v2";
 const HOLDER = "0x0000000000000000000000000000000000000a11";
 const RECIPIENT = "0x711e691962E5c054b78071C789A0C8CE657377aD";
 // A token the wallet tracks and the bundled token list does not name.
@@ -51,6 +62,9 @@ const TRANSFER_DATA = new Interface([
     "function transfer(address to, uint256 amount)",
 ]).encodeFunctionData("transfer", [RECIPIENT, 1234500000n]);
 
+// Every URL asked of a Blockscout, in order.
+const mockAsked = [];
+
 // The explorer's answers: the transfer in HOLDER's token transfers, and the
 // transaction itself, sent to the token contract.
 function mockExplorerAnswer(url) {
@@ -77,7 +91,11 @@ function mockExplorerAnswer(url) {
         };
     }
     if (url === EXPLORER + "/transactions/" + TX_HASH) {
-        return { to: { hash: TOKEN }, raw_input: TRANSFER_DATA };
+        return {
+            to: { hash: TOKEN },
+            raw_input: TRANSFER_DATA,
+            block_number: 100,
+        };
     }
     return { items: [] };
 }
@@ -140,6 +158,7 @@ beforeEach(() => {
     globalThis.document = makeDocument();
     globalThis.window = { location: { search: "" } };
     state.blockscoutUrl = EXPLORER;
+    state.networkEndpoints = {};
     state.wallets = [
         {
             name: "Main",
@@ -148,13 +167,18 @@ beforeEach(() => {
         },
     ];
     state.trackedTokens = [{ address: TOKEN, symbol: "TDOL", decimals: 6 }];
+    state.networkTrackedTokens = {};
     state.viewData = {};
     state.viewStack = [];
     state.currentView = null;
 });
 
 test("a token transfer's decoded details name the token contract and the amount at its scale", async () => {
-    const [row] = await fetchRecentTransactions(HOLDER, EXPLORER, 1);
+    const [row] = await fetchRecentTransactions(
+        HOLDER,
+        EXPLORER,
+        NETWORKS.mainnet.chainId,
+    );
     expect(row.to).toBe(RECIPIENT);
     expect(row.contractAddress).toBe(TOKEN.toLowerCase());
 
@@ -174,3 +198,96 @@ test("a token transfer's decoded details name the token contract and the amount
         '<div class="font-bold">1234.5000 TDOL</div>',
     );
 });
+
+// Mainnet is active, and its Blockscout knows nothing of the transaction. The
+// row was read from the Blockscout Settings remembers for Sepolia, and the
+// screen reads the transaction from there too, so every link on it is drawn.
+test("with mainnet active, a Sepolia transaction is read from Sepolia's Blockscout and its links open the Sepolia explorer", async () => {
+    state.networkId = "mainnet";
+    state.blockscoutUrl = OTHER_EXPLORER;
+    state.networkEndpoints = { sepolia: { blockscoutUrl: EXPLORER } };
+    const [row] = await fetchRecentTransactions(
+        HOLDER,
+        EXPLORER,
+        NETWORKS.sepolia.chainId,
+    );
+
+    transactionDetail.show(row);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+
+    const sepolia = "https://sepolia.etherscan.io";
+    const links = (id) =>
+        [...node(id).innerHTML.matchAll(/href="([^"]*)"/g)].map((m) => m[1]);
+    expect(links("tx-detail-hash")).toEqual([`${sepolia}/tx/${TX_HASH}`]);
+    expect(links("tx-detail-from")).toEqual([`${sepolia}/address/${HOLDER}`]);
+    expect(links("tx-detail-to")).toEqual([`${sepolia}/address/${RECIPIENT}`]);
+    expect(links("tx-detail-token-contract")).toEqual([
+        `${sepolia}/token/${TOKEN.toLowerCase()}`,
+    ]);
+    expect(links("tx-detail-block")).toEqual([`${sepolia}/block/100`]);
+    expect(links("tx-detail-calldata-details")).toEqual([
+        `${sepolia}/address/${TOKEN}`,
+        `${sepolia}/address/${RECIPIENT}`,
+    ]);
+});
+
+test("with mainnet active and no Blockscout remembered for Sepolia, a Sepolia transaction is asked of Sepolia's default Blockscout", async () => {
+    state.networkId = "mainnet";
+    state.blockscoutUrl = OTHER_EXPLORER;
+    const [row] = await fetchRecentTransactions(
+        HOLDER,
+        EXPLORER,
+        NETWORKS.sepolia.chainId,
+    );
+    mockAsked.length = 0;
+
+    transactionDetail.show(row);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+
+    expect(mockAsked).toEqual([
+        NETWORKS.sepolia.defaultBlockscoutUrl + "/transactions/" + TX_HASH,
+    ]);
+});
+
+// Open the Sepolia transfer's detail screen with mainnet active, and wait for
+// its decoded details.
+async function showSepoliaTransferWithMainnetActive() {
+    state.networkId = "mainnet";
+    state.blockscoutUrl = OTHER_EXPLORER;
+    state.networkEndpoints = { sepolia: { blockscoutUrl: EXPLORER } };
+    const [row] = await fetchRecentTransactions(
+        HOLDER,
+        EXPLORER,
+        NETWORKS.sepolia.chainId,
+    );
+    transactionDetail.show(row);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+test("with mainnet active, a Sepolia token transfer's decoded details name the token tracked on Sepolia and its amount at its scale", async () => {
+    state.trackedTokens = [];
+    state.networkTrackedTokens = {
+        sepolia: [{ address: TOKEN, symbol: "TDOL", decimals: 6 }],
+    };
+    await showSepoliaTransferWithMainnetActive();
+
+    expect(decodedLine("Token")).toContain('<div class="font-bold">TDOL</div>');
+    expect(decodedLine("Amount")).toContain(
+        '<div class="font-bold">1234.5000 TDOL</div>',
+    );
+});
+
+// The same contract address on mainnet is another token, so what the wallet
+// tracks and holds there names nothing on Sepolia.
+test("with mainnet active, a Sepolia token transfer's decoded details take nothing from mainnet's tracked tokens or balances", async () => {
+    state.trackedTokens = [{ address: TOKEN, symbol: "MDOL", decimals: 18 }];
+    state.wallets[0].addresses[0].tokenBalances = [
+        { address: TOKEN, symbol: "MDOL", decimals: 18, balance: "1.0" },
+    ];
+    await showSepoliaTransferWithMainnetActive();
+
+    expect(decodedLine("Token")).not.toContain("MDOL");
+    expect(decodedLine("Amount")).toContain(
+        '<div class="font-bold">1234500000 base units (decimals unknown)</div>',
+    );
+});

tests/txStatus.test.js

@@ -29,8 +29,13 @@ jest.mock("../src/shared/log", () => ({
 }));
 
 const mockReceiptLookup = jest.fn();
+// The RPC URL and network of every node a wait was given.
+const mockNodes = [];
 jest.mock("../src/shared/balances", () => ({
-    getProvider: () => ({ getTransactionReceipt: mockReceiptLookup }),
+    getProvider: (rpcUrl, networkId) => {
+        mockNodes.push({ rpcUrl, networkId });
+        return { getTransactionReceipt: mockReceiptLookup };
+    },
     refreshBalances: jest.fn(),
 }));
 
@@ -107,6 +112,7 @@ global.chrome = { storage };
 
 const txStatus = require("../src/popup/views/txStatus");
 const { state } = require("../src/shared/state");
+const { NETWORKS } = require("../src/shared/networks");
 const { RESTORABLE_VIEWS } = require("../src/shared/restorableViews");
 const { log } = require("../src/shared/log");
 
@@ -118,6 +124,7 @@ const TX_INFO = {
     amount: "0.0050",
     token: "ETH",
     tokenSymbol: null,
+    chainId: NETWORKS.mainnet.chainId,
 };
 
 // True when a view element is not hidden.
@@ -137,8 +144,14 @@ beforeEach(() => {
     jest.setSystemTime(new Date("2026-08-11T12:00:00Z"));
     elements.clear();
     mockReceiptLookup.mockReset();
+    mockNodes.length = 0;
     log.errorf.mockClear();
+    state.networkId = "mainnet";
+    state.rpcUrl = NETWORKS.mainnet.defaultRpcUrl;
+    state.networkEndpoints = {};
     state.wallets = [];
+    state.trackedTokens = [];
+    state.networkTrackedTokens = {};
     state.viewData = {};
     state.viewStack = [];
     state.currentView = null;
@@ -349,14 +362,14 @@ describe("WaitTx persistence across popup close", () => {
             // out of restoreView().
             {
                 hash: TX_HASH,
-                txInfo: { to: 42, amount: "0.0050" },
+                txInfo: { ...TX_INFO, to: 42 },
                 broadcastTime: Date.now(),
             },
             // Otherwise complete but an array: only Array.isArray() rejects
             // it, since typeof [] is "object" and the fields are present.
             {
                 hash: TX_HASH,
-                txInfo: Object.assign([], { to: RECIPIENT, amount: "0.0050" }),
+                txInfo: Object.assign([], TX_INFO),
                 broadcastTime: Date.now(),
             },
             {
@@ -364,6 +377,18 @@ describe("WaitTx persistence across popup close", () => {
                 txInfo: { to: RECIPIENT },
                 broadcastTime: Date.now(),
             },
+            // Otherwise complete but for a chain id naming no network: there
+            // is no node to ask for the receipt, and no explorer to link to.
+            {
+                hash: TX_HASH,
+                txInfo: { ...TX_INFO, chainId: undefined },
+                broadcastTime: Date.now(),
+            },
+            {
+                hash: TX_HASH,
+                txInfo: { ...TX_INFO, chainId: "0x5" },
+                broadcastTime: Date.now(),
+            },
         ]) {
             state.viewData = { pendingWait: bad };
             expect(txStatus.restoreWait()).toBe(false);
@@ -499,6 +524,154 @@ describe("WaitTx when the popup closes", () => {
     });
 });
 
+// The popup can reopen onto WaitTx after Settings switched the network. The
+// wait asked the active network's node for the receipt, never found it, and
+// reported a timeout, and its links went to the active network's explorer
+// (https://git.eeqj.de/sneak/AutistMask/issues/584).
+describe("WaitTx for a Sepolia transaction with mainnet active", () => {
+    const SEPOLIA_NODE = "https://sepolia.node.example.invalid";
+    const sepoliaTx = { ...TX_INFO, chainId: NETWORKS.sepolia.chainId };
+
+    beforeEach(() => {
+        state.rpcUrl = "https://mainnet.node.example.invalid";
+        state.networkEndpoints = { sepolia: { rpcUrl: SEPOLIA_NODE } };
+    });
+
+    test("the receipt is asked of the Sepolia node Settings has", async () => {
+        mockReceiptLookup.mockResolvedValue({ blockNumber: 21000000 });
+        state.viewData = {
+            pendingWait: {
+                txInfo: sepoliaTx,
+                hash: TX_HASH,
+                broadcastTime: Date.now(),
+            },
+        };
+        expect(txStatus.restoreWait()).toBe(true);
+        await jest.advanceTimersByTimeAsync(0);
+
+        expect(mockNodes).toEqual([
+            { rpcUrl: SEPOLIA_NODE, networkId: "sepolia" },
+        ]);
+        expect(state.currentView).toBe("success-tx");
+    });
+
+    test("the recipient and hash link to the Sepolia explorer", () => {
+        mockReceiptLookup.mockResolvedValue(null);
+        txStatus.showWait(sepoliaTx, TX_HASH);
+
+        expect(getElement("wait-tx-to").innerHTML).toContain(
+            `href="https://sepolia.etherscan.io/address/${RECIPIENT}"`,
+        );
+        expect(getElement("wait-tx-hash").innerHTML).toContain(
+            `href="https://sepolia.etherscan.io/tx/${TX_HASH}"`,
+        );
+    });
+});
+
+// SuccessTx and ErrorTx follow WaitTx and describe the same transaction, but
+// their links went to the active network's explorer
+// (https://git.eeqj.de/sneak/AutistMask/issues/622). Each test checks the
+// screen again after rendering it from its stored view data alone, as a
+// reopened popup does.
+describe("SuccessTx and ErrorTx for a Sepolia transaction with mainnet active", () => {
+    const SEPOLIA_EXPLORER = "https://sepolia.etherscan.io";
+    const TOKEN = "0x1c7D4B196Cb0C7B01d743Fbc6116a902379C7238";
+    const sepoliaTx = { ...TX_INFO, chainId: NETWORKS.sepolia.chainId };
+
+    test("the recipient, block and hash on SuccessTx link to the Sepolia explorer", async () => {
+        function expectSepoliaLinks() {
+            expect(getElement("success-tx-to").innerHTML).toContain(
+                `href="${SEPOLIA_EXPLORER}/address/${RECIPIENT}"`,
+            );
+            expect(getElement("success-tx-block").innerHTML).toContain(
+                `href="${SEPOLIA_EXPLORER}/block/21000000"`,
+            );
+            expect(getElement("success-tx-hash").innerHTML).toContain(
+                `href="${SEPOLIA_EXPLORER}/tx/${TX_HASH}"`,
+            );
+        }
+        mockReceiptLookup.mockResolvedValue({ blockNumber: 21000000 });
+        txStatus.showWait(sepoliaTx, TX_HASH);
+        await jest.advanceTimersByTimeAsync(10000);
+        expect(state.currentView).toBe("success-tx");
+        expectSepoliaLinks();
+
+        elements.clear();
+        txStatus.renderSuccess();
+        expectSepoliaLinks();
+    });
+
+    test("the addresses in SuccessTx's decoded action link to the Sepolia explorer", async () => {
+        function expectSepoliaLinks() {
+            const html = getElement("success-tx-decoded").innerHTML;
+            expect(html).toContain(
+                `href="${SEPOLIA_EXPLORER}/address/${TOKEN}"`,
+            );
+            expect(html).toContain(
+                `href="${SEPOLIA_EXPLORER}/address/${RECIPIENT}"`,
+            );
+        }
+        const decoded = {
+            name: "Transfer",
+            details: [
+                { label: "Token", address: TOKEN, isToken: true },
+                { label: "Recipient", address: RECIPIENT },
+            ],
+        };
+        mockReceiptLookup.mockResolvedValue({ blockNumber: 21000000 });
+        txStatus.showWait({ ...sepoliaTx, decoded }, TX_HASH);
+        await jest.advanceTimersByTimeAsync(10000);
+        expect(state.currentView).toBe("success-tx");
+        expectSepoliaLinks();
+
+        elements.clear();
+        txStatus.renderSuccess();
+        expectSepoliaLinks();
+    });
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/629
+    test("SuccessTx's decoded action names the token from the tokens tracked on Sepolia", async () => {
+        function expectTokenNamed() {
+            expect(getElement("success-tx-decoded").innerHTML).toContain(
+                '<div class="font-bold">TDOL</div>',
+            );
+        }
+        state.networkTrackedTokens = {
+            sepolia: [{ address: TOKEN, symbol: "TDOL", decimals: 6 }],
+        };
+        const decoded = {
+            name: "Transfer",
+            details: [{ label: "Token", address: TOKEN, isToken: true }],
+        };
+        mockReceiptLookup.mockResolvedValue({ blockNumber: 21000000 });
+        txStatus.showWait({ ...sepoliaTx, decoded }, TX_HASH);
+        await jest.advanceTimersByTimeAsync(10000);
+        expect(state.currentView).toBe("success-tx");
+        expectTokenNamed();
+
+        elements.clear();
+        txStatus.renderSuccess();
+        expectTokenNamed();
+    });
+
+    test("the recipient and hash on ErrorTx link to the Sepolia explorer", () => {
+        function expectSepoliaLinks() {
+            expect(getElement("error-tx-to").innerHTML).toContain(
+                `href="${SEPOLIA_EXPLORER}/address/${RECIPIENT}"`,
+            );
+            expect(getElement("error-tx-hash").innerHTML).toContain(
+                `href="${SEPOLIA_EXPLORER}/tx/${TX_HASH}"`,
+            );
+        }
+        txStatus.showError(sepoliaTx, TX_HASH, "The transaction failed.");
+        expectSepoliaLinks();
+
+        elements.clear();
+        txStatus.renderError();
+        expectSepoliaLinks();
+    });
+});
+
 describe("wait-tx is a view the popup may reopen onto", () => {
     // The resume feature is wired through RESTORABLE_VIEWS: restoreView()
     // refuses any view not in the set, so dropping "wait-tx" from it kills

tests/uniswapRecipient.test.js

@@ -7,9 +7,12 @@
 // (https://git.eeqj.de/sneak/AutistMask/issues/592), the address whose
 // balance a BALANCE_CHECK_ERC20 checks
 // (https://git.eeqj.de/sneak/AutistMask/issues/600), any token a swap
-// leaves in the router (https://git.eeqj.de/sneak/AutistMask/issues/606), and
+// leaves in the router (https://git.eeqj.de/sneak/AutistMask/issues/606),
 // what each PERMIT2_TRANSFER_FROM moves
-// (https://git.eeqj.de/sneak/AutistMask/issues/611).
+// (https://git.eeqj.de/sneak/AutistMask/issues/611), and when an
+// UNWRAP_WETH makes the output ETH
+// (https://git.eeqj.de/sneak/AutistMask/issues/607 and
+// https://git.eeqj.de/sneak/AutistMask/issues/642).
 //
 // Every swap command, SWEEP, WRAP_ETH, UNWRAP_WETH, TRANSFER, PAY_PORTION,
 // PAY_PORTION_FULL_PRECISION, PERMIT2_TRANSFER_FROM, ACROSS_V4_DEPOSIT_V3 and
@@ -268,18 +271,28 @@ const SWAP_USDT_FOR_ETH = [
         [[[ZERO, USDT, 500, 10, ZERO], false, USDT_2000, ONE_WETH, "0x"]],
     ),
 ];
+const SWAP_USDT_FOR_WETH = [
+    0x06, // SWAP_EXACT_IN_SINGLE
+    coder.encode(
+        [
+            "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
+        ],
+        [[[USDT, WETH, 500, 10, ZERO], true, USDT_2000, ONE_WETH, "0x"]],
+    ),
+];
 // SWAP_EXACT_IN_SINGLE with no parameters, which cannot be read.
 const UNREADABLE_SWAP = [0x06, "0x"];
 const SETTLE_USDT = [
     0x0b,
     coder.encode(["address", "uint256", "bool"], [USDT, 0n, true]),
 ];
-function take(currency, recipient) {
+// A TAKE of `amount`, by default zero: the open delta, all the step owes.
+function take(currency, recipient, amount = 0n) {
     return [
         0x0e,
         coder.encode(
             ["address", "address", "uint256"],
-            [currency, recipient, 0n],
+            [currency, recipient, amount],
         ),
     ];
 }
@@ -387,6 +400,18 @@ describe("each swap command's recipient", () => {
             data: (r) => execute(swapToWeth(r)),
             min: "1.0000 WETH",
         },
+        {
+            // Its input has V3_SWAP_EXACT_IN's layout, with amountOut and
+            // amountInMax in place of amountIn and amountOutMin, and a path
+            // that lists the token bought first.
+            kind: "V3_SWAP_EXACT_OUT",
+            data: (r) =>
+                execute([
+                    0x01,
+                    v3SwapExactIn(r, ONE_WETH, USDT_2000, WETH, USDT)[1],
+                ]),
+            min: "1.0000 WETH",
+        },
         {
             kind: "V4_SWAP with TAKE",
             data: (r) =>
@@ -519,7 +544,7 @@ describe("an output left in the router is not received", () => {
         {
             kind: "an UNWRAP_WETH to the user, then the swap",
             data: execute(unwrapWeth(MSG_SENDER), toRouter),
-            min: "1.0000 ETH",
+            min: "1.0000 WETH",
         },
         {
             kind: "the swap, then a WRAP_ETH of zero to the user",
@@ -556,6 +581,385 @@ describe("an output left in the router is not received", () => {
     });
 });
 
+// https://git.eeqj.de/sneak/AutistMask/issues/607: an UNWRAP_WETH pays out,
+// as ETH, the WETH the router holds when it runs. Token Out read ETH whenever
+// the output side was WETH, so a swap that paid its WETH to the user before
+// the UNWRAP_WETH read as ETH, though the user receives WETH.
+describe("an UNWRAP_WETH makes the output ETH only when the router holds it", () => {
+    test("a swap paying its WETH to the user, then an UNWRAP_WETH, reads as WETH", () => {
+        const result = decode(
+            execute(swapToWeth(MSG_SENDER), unwrapWeth(MSG_SENDER)),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(labels(result)).toEqual(PAID_TO_USER);
+        expect(detail(result, "Min. received").value).toBe("1.0000 WETH");
+    });
+
+    test("a swap paying its WETH to the router, then an UNWRAP_WETH to the user, reads as ETH", () => {
+        const result = decode(
+            execute(swapToWeth(ADDRESS_THIS), unwrapWeth(MSG_SENDER)),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(labels(result)).toEqual(PAID_TO_USER);
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+
+    // The SWEEP pays the user all the WETH the router holds, so the
+    // UNWRAP_WETH finds none of it.
+    test("a swap paying its WETH to the router, then a SWEEP of it to the user, then an UNWRAP_WETH, reads as WETH", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                sweep(WETH, MSG_SENDER),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 WETH");
+    });
+
+    // The user receives the first step's WETH as WETH and the second's as
+    // ETH. The second step sets the output side and pays its WETH to the
+    // router, so the output reads as ETH with the second step's minimum.
+    test("two swaps, the second paying its WETH to the router, then an UNWRAP_WETH, reads as ETH", () => {
+        const result = decode(
+            execute(
+                swapToWeth(MSG_SENDER),
+                v2Swap(0x08, ADDRESS_THIS, USDC_1990, ONE_WETH / 2n, [
+                    USDC,
+                    WETH,
+                ]),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received").value).toBe("0.5000 ETH");
+    });
+
+    // The same two swaps the other way round. The user receives the first
+    // step's WETH as ETH and the second's as WETH. The second step sets the
+    // output side and pays its WETH to the user, so the output reads as WETH
+    // with the second step's minimum, though the router holds the first's.
+    test("two swaps, the second paying its WETH to the user, then an UNWRAP_WETH, reads as WETH", () => {
+        const result = decode(
+            execute(
+                v2Swap(0x08, ADDRESS_THIS, USDC_1990, ONE_WETH / 2n, [
+                    USDC,
+                    WETH,
+                ]),
+                swapToWeth(MSG_SENDER),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDC → WETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 WETH");
+    });
+
+    // One V4 step buys at least 1 WETH and TAKEs 0.6 WETH to the user and the
+    // rest to the router. The user receives 0.6 WETH and the rest as ETH.
+    // Neither minimum is shown: the decoder does not count how much of the
+    // step's minimum reaches the router, nor read the UNWRAP_WETH's own.
+    test("one V4 step paying part of its WETH to the user and the rest to the router, then an UNWRAP_WETH, reads as ETH with no minimum", () => {
+        const result = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_WETH,
+                    SETTLE_USDT,
+                    take(WETH, MSG_SENDER, (ONE_WETH * 6n) / 10n),
+                    take(WETH, ADDRESS_THIS),
+                ),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(labels(result)).toEqual([
+            "Protocol",
+            "Token In",
+            "Amount",
+            "Token Out",
+            "Steps",
+            "Deadline",
+        ]);
+    });
+
+    // A TAKE the decoder cannot read may pay part of the WETH to the user.
+    test("one V4 step paying WETH to the router beside a TAKE that cannot be read, then an UNWRAP_WETH, reads as ETH with no minimum", () => {
+        const result = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_WETH,
+                    SETTLE_USDT,
+                    withDirtyWord(take(WETH, MSG_SENDER), 1),
+                    take(WETH, ADDRESS_THIS),
+                ),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received")).toBeUndefined();
+        expect(detail(result, "Min. paid out")).toBeUndefined();
+    });
+
+    // A step after the UNWRAP_WETH that sets the output side sets it anew.
+    test("a swap paying WETH to the user after an UNWRAP_WETH of an earlier swap's WETH reads as WETH", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(MSG_SENDER),
+                v2Swap(0x08, MSG_SENDER, USDC_1990, ONE_WETH / 2n, [
+                    USDC,
+                    WETH,
+                ]),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(detail(result, "Min. received").value).toBe("0.5000 WETH");
+    });
+
+    // The EXECUTE_SUB_PLAN's own steps, which the decoder does not read, buy
+    // the user USDC as well, so Token Out is not named.
+    test("a swap paying its WETH to the router, then an UNWRAP_WETH, then an EXECUTE_SUB_PLAN, names no Token Out", () => {
+        const subPlan = [
+            0x21,
+            coder.encode(
+                ["bytes", "bytes[]"],
+                [
+                    "0x00",
+                    [
+                        v3SwapExactIn(
+                            MSG_SENDER,
+                            USDT_2000,
+                            USDC_1990,
+                            USDT,
+                            USDC,
+                        )[1],
+                    ],
+                ],
+            ),
+        ];
+        const result = decode(
+            execute(swapToWeth(ADDRESS_THIS), unwrapWeth(MSG_SENDER), subPlan),
+        );
+        expect(result.name).toBe("Uniswap Swap");
+        expect(detail(result, "Token Out").value).toBe(UNDECODED);
+        expect(detail(result, "Min. received")).toBeUndefined();
+    });
+});
+
+// https://git.eeqj.de/sneak/AutistMask/issues/642: a step between the swap and
+// the UNWRAP_WETH may take WETH out of the router or pay it WETH, and a step
+// after an UNWRAP_WETH into the router may pay its ETH out as WETH, yet each
+// route read as ETH with the swap's minimum. A step the decoder read that is a
+// PERMIT2_PERMIT, a BALANCE_CHECK_ERC20, or a SWEEP, TRANSFER, PAY_PORTION or
+// PAY_PORTION_FULL_PRECISION of a token other than WETH, and not of ETH to a
+// WETH contract, cannot take WETH out of the router or pay anyone WETH; the
+// decoder treats every other step as one that may.
+describe("what reaches the UNWRAP_WETH of the swap's WETH", () => {
+    const NO_MINIMUM_TO_USER = PAID_TO_USER.filter(
+        (l) => l !== "Min. received",
+    );
+    const NO_MINIMUM_ELSEWHERE = PAID_ELSEWHERE.filter(
+        (l) => l !== "Min. paid out",
+    );
+
+    test.each([
+        {
+            kind: "a TRANSFER of 0.0025 WETH",
+            step: transfer(0x05, WETH, OTHER, ONE_WETH / 400n),
+        },
+        {
+            kind: "a PAY_PORTION of 25 bips",
+            step: transfer(0x06, WETH, OTHER, 25n),
+        },
+        {
+            kind: "a PAY_PORTION_FULL_PRECISION of 1e15",
+            step: transfer(0x07, WETH, OTHER, 10n ** 15n),
+        },
+    ])(
+        "$kind to another address between them reads as ETH with no minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(swapToWeth(ADDRESS_THIS), step, unwrapWeth(MSG_SENDER)),
+                USER,
+                ROUTER_V2_1_2,
+            );
+            expect(result.name).toBe("Swap USDT → ETH");
+            expect(labels(result)).toEqual(NO_MINIMUM_ELSEWHERE);
+            expect(paidTo(result)).toEqual([OTHER]);
+        },
+    );
+
+    test.each([
+        {
+            kind: "a SWEEP whose recipient cannot be read",
+            step: withDirtyWord(sweep(WETH, OTHER), 1),
+        },
+        {
+            kind: "a V4 SETTLE of 0.5 WETH from the router",
+            step: v4Swap([
+                0x0b,
+                coder.encode(
+                    ["address", "uint256", "bool"],
+                    [WETH, ONE_WETH / 2n, false],
+                ),
+            ]),
+        },
+        {
+            kind: "a bridge deposit of 0.5 WETH",
+            step: acrossDeposit(USER, USER, WETH, ONE_WETH / 2n),
+        },
+        {
+            kind: "a PERMIT2_TRANSFER_FROM of 0.5 WETH into the router",
+            step: permit2TransferFrom(WETH, ADDRESS_THIS, ONE_WETH / 2n),
+        },
+    ])("$kind between them reads as ETH with no minimum", ({ step }) => {
+        const result = decode(
+            execute(swapToWeth(ADDRESS_THIS), step, unwrapWeth(MSG_SENDER)),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received")).toBeUndefined();
+        expect(detail(result, "Min. paid out")).toBeUndefined();
+    });
+
+    test.each([
+        {
+            kind: "a PERMIT2_PERMIT between them",
+            steps: [permit2Permit(USDT, USDT_2000), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a BALANCE_CHECK_ERC20 of another address between them",
+            steps: [balanceCheck(USDC, 1n, OTHER), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a BALANCE_CHECK_ERC20 of the sender with a zero minimum between them",
+            steps: [balanceCheck(USDC, 0n), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a SWEEP of USDC between them",
+            steps: [sweep(USDC, MSG_SENDER), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "an UNWRAP_WETH into the router, then a SWEEP of its ETH,",
+            steps: [unwrapWeth(ADDRESS_THIS), sweep(ZERO, MSG_SENDER)],
+        },
+    ])("$kind reads as ETH with the swap's minimum", ({ steps }) => {
+        const result = decode(execute(swapToWeth(ADDRESS_THIS), ...steps));
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+
+    // The SWEEP pays the user the swap's WETH, so the UNWRAP_WETH unwraps the
+    // WRAP_ETH's.
+    test("a SWEEP of the swap's WETH to the user, then a WRAP_ETH into the router, reads as ETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                sweep(WETH, MSG_SENDER),
+                wrapEth(ADDRESS_THIS, ONE_WETH),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    test("an UNWRAP_WETH into the router, then a WRAP_ETH of all its ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(ADDRESS_THIS),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    // The router reads the recipient from the last 20 bytes of its word,
+    // here address(2), the router itself.
+    test("an UNWRAP_WETH whose recipient cannot be read, then a WRAP_ETH of all the router's ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                withDirtyWord(unwrapWeth(ADDRESS_THIS), 0),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(detail(result, "Min. received")).toBeUndefined();
+        expect(detail(result, "Min. paid out")).toBeUndefined();
+    });
+
+    // A SWEEP of WETH pays out WETH, and ETH paid to a WETH contract pays the
+    // router WETH for it. The decoder treats each as a step that may pay out
+    // as WETH the swap's output, which the router holds as ETH.
+    test.each([
+        {
+            kind: "a SWEEP of WETH to the user",
+            step: sweep(WETH, MSG_SENDER),
+        },
+        {
+            kind: "a SWEEP of its ETH to the WETH contract",
+            step: sweep(ZERO, WETH),
+        },
+        {
+            kind: "a TRANSFER of 0.5 ETH to the WETH contract",
+            step: transfer(0x05, ZERO, WETH, ONE_WETH / 2n),
+        },
+        {
+            kind: "a PAY_PORTION of all its ETH to the WETH contract",
+            step: transfer(0x06, ZERO, WETH, 10000n),
+        },
+    ])(
+        "an UNWRAP_WETH into the router, then $kind, reads as WETH with no minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(
+                    swapToWeth(ADDRESS_THIS),
+                    unwrapWeth(ADDRESS_THIS),
+                    step,
+                ),
+            );
+            expect(result.name).toBe("Swap USDT → WETH");
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Min. paid out")).toBeUndefined();
+        },
+    );
+
+    // The user receives 0.5 WETH and the rest of the swap's output as ETH.
+    test("an UNWRAP_WETH into the router, then a WRAP_ETH of 0.5 ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(ADDRESS_THIS),
+                wrapEth(MSG_SENDER, ONE_WETH / 2n),
+                sweep(ZERO, MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    // The UNWRAP_WETH pays the user the swap's WETH as ETH; the WRAP_ETH wraps
+    // the ETH an earlier V4 step paid the router.
+    test("an UNWRAP_WETH to the user, then a WRAP_ETH of all the router's ETH to the user, reads as ETH", () => {
+        const result = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_ETH,
+                    SETTLE_USDT,
+                    take(ZERO, ADDRESS_THIS),
+                ),
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(MSG_SENDER),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(detail(result, "Token Out").value).toBe("ETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+});
+
 // https://git.eeqj.de/sneak/AutistMask/issues/606: any token a step pays the
 // router stays there unless a later step pays out or spends all of it, not
 // only the swap's output. A V4 SETTLE can take more of the user's tokens than
@@ -671,6 +1075,7 @@ describe("any token left in the router is not received", () => {
                 v3SwapExactIn(MSG_SENDER, USDT_2000, USDC_1990, USDT, USDC),
             ),
             left: tokenLine(WETH, "WETH"),
+            spent: "2000.0000 USDT",
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a swap of 0.5 WETH from the router",
@@ -697,6 +1102,7 @@ describe("any token left in the router is not received", () => {
                 v2Swap(0x08, MSG_SENDER, ONE_WETH, USDC_1990, [WETH, USDC]),
             ),
             left: tokenLine(WETH, "WETH"),
+            spent: "1.0000 WETH",
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V3 swap of 1 WETH that the user pays for",
@@ -705,6 +1111,7 @@ describe("any token left in the router is not received", () => {
                 v3SwapExactIn(MSG_SENDER, ONE_WETH, USDC_1990, WETH, USDC),
             ),
             left: tokenLine(WETH, "WETH"),
+            spent: "1.0000 WETH",
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V4 swap of 1 WETH with a SETTLE of 1 WETH by the user",
@@ -717,6 +1124,7 @@ describe("any token left in the router is not received", () => {
                 ),
             ),
             left: tokenLine(WETH, "WETH"),
+            spent: "1.0000 WETH",
         },
         {
             kind: "a swap paying WETH to the router, a WRAP_ETH of 1 ETH into the router, then a swap of 1 WETH from the router",
@@ -792,9 +1200,13 @@ describe("any token left in the router is not received", () => {
                 ),
             ),
             left: tokenLine(WETH, "WETH"),
+            // The step has two SETTLEs of WETH, so what the user pays is not
+            // known.
+            spent: UNDECODED,
         },
         // The user pays for the swap by a SETTLE_ALL or SETTLE whose currency
-        // the decoder cannot read, so the SETTLE from the router pays nothing.
+        // the decoder cannot read, so the SETTLE from the router pays nothing,
+        // and what the user pays is not known.
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V4 swap of 1 WETH with a SETTLE_ALL that cannot be read and a SETTLE of OPEN_DELTA from the router",
             data: execute(
@@ -807,6 +1219,7 @@ describe("any token left in the router is not received", () => {
                 ),
             ),
             left: tokenLine(WETH, "WETH"),
+            unread: true,
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V4 swap of 1 WETH with a SETTLE by the user that cannot be read and a SETTLE of OPEN_DELTA from the router",
@@ -820,6 +1233,7 @@ describe("any token left in the router is not received", () => {
                 ),
             ),
             left: tokenLine(WETH, "WETH"),
+            unread: true,
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V4 step with an exact-in of 1 WETH less 1,000 wei and an empty path, a swap of 1,000 wei, and a SETTLE of OPEN_DELTA from the router",
@@ -873,12 +1287,20 @@ describe("any token left in the router is not received", () => {
             ),
             left: { label: "Token moved into the router", value: "ETH" },
         },
-    ])("$kind", ({ data, left }) => {
+    ])("$kind", ({ data, left, spent, unread }) => {
         const result = decode(data);
         expect(labels(result)).toEqual([
             "Protocol",
             "Token In",
-            "Amount",
+            // A later step whose SETTLE or SETTLE_ALL the decoder cannot read
+            // may take anything from the sender: one line says so, in place
+            // of the Amount line (https://git.eeqj.de/sneak/AutistMask/issues/625).
+            unread ? "Moved from the sender" : "Amount",
+            // A later swap step the user pays for spends `spent` of a token
+            // other than Token In.
+            ...(spent
+                ? ["Moved from the sender", "Token moved", "Moved to"]
+                : []),
             "Token Out",
             "Paid to",
             "Token moved into the router",
@@ -886,6 +1308,14 @@ describe("any token left in the router is not received", () => {
             "Steps",
             "Deadline",
         ]);
+        if (spent) {
+            expect(detail(result, "Moved from the sender").value).toBe(spent);
+        }
+        if (unread) {
+            expect(detail(result, "Moved from the sender").value).toBe(
+                UNDECODED,
+            );
+        }
         expect(paidTo(result)).toEqual([STAYS_IN_ROUTER]);
         expect(detail(result, "Token moved into the router")).toEqual(left);
         expect(detail(result, "Min. paid out").value).toBe("1990.0000 USDC");
@@ -1496,15 +1926,6 @@ describe("a payout of part of the router's output", () => {
             ),
             min: "1.0000 WETH",
         },
-        {
-            kind: "PAY_PORTION of 25 bips, then UNWRAP_WETH",
-            data: execute(
-                swapToWeth(ADDRESS_THIS),
-                transfer(0x06, WETH, OTHER, 25n),
-                unwrapWeth(MSG_SENDER),
-            ),
-            min: "1.0000 ETH",
-        },
         {
             kind: "V4 TAKE_PORTION of 25 bips, then TAKE_ALL",
             data: execute(
@@ -1993,10 +2414,6 @@ describe("a payout that cannot be read is never said to be received", () => {
                 ),
             ],
         },
-        {
-            kind: "V3_SWAP_EXACT_OUT",
-            step: [0x01, swapToWeth(OTHER)[1]],
-        },
         {
             kind: "EXECUTE_SUB_PLAN",
             step: [

tests/uniswapRouterAddress.test.js

@@ -7,6 +7,12 @@
 // only when the transaction is sent to a Universal Router deployment on the
 // network it is for; anywhere else it is left to the raw data.
 //
+// The transaction history labelled any call named `execute` or `multicall` a
+// Swap, whatever address it went to
+// (https://git.eeqj.de/sneak/AutistMask/issues/580). It now does so only for
+// such a call sent to a Universal Router deployment on the network the
+// transaction is on; any other is labelled by its method name.
+//
 // The transaction detail screen and the approval screen are driven against a
 // minimal DOM stub in the shape tests/tokenTransferDetail.test.js uses, the
 // approval screen opened the way tests/swapStatusAmount.test.js opens it.
@@ -33,6 +39,7 @@ globalThis.chrome = {
 };
 
 const { state } = require("../src/shared/state");
+const { fetchRecentTransactions } = require("../src/shared/transactions");
 const approval = require("../src/popup/views/approval");
 const { decodeCalldata } = approval;
 const transactionDetail = require("../src/popup/views/transactionDetail");
@@ -47,6 +54,8 @@ const SEPOLIA_ROUTER = "0x3a9d48ab9751398bbfa63ad67599bb04e4bdf98b";
 const ROUTER_ON_BOTH = "0x3fC91A3afd70395Cd496C647d5a6CC9D4B2b7FAD";
 // The address with no code from the issue.
 const ORDINARY = "0x0b0050Da68435b3EcBC236c40F16dB2070bCD79A";
+// A contract that is not a router, such as a multisig.
+const OTHER_CONTRACT = "0x5afe000000000000000000000000000000005afe";
 
 const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
 const SEPOLIA_WETH = "0xfFf9976782d46CC05630D1f6eBAb18b2324d6B14";
@@ -129,8 +138,13 @@ describe("execute() calldata on the approval screen's decoder", () => {
 // The transaction the explorer reports: SWAP_DATA, sent to `mockSentTo`.
 const TX_HASH = "0x" + "5".repeat(64);
 let mockSentTo = null;
+// The transactions the explorer reports for RECIPIENT's history.
+let mockHistory = [];
 
 function mockExplorerAnswer(url) {
+    if (url.endsWith("/addresses/" + RECIPIENT + "/transactions")) {
+        return { items: mockHistory };
+    }
     if (url.endsWith("/transactions/" + TX_HASH)) {
         return {
             to: { hash: mockSentTo },
@@ -186,57 +200,126 @@ function node(id) {
     return globalThis.document.getElementById(id);
 }
 
-// Open the transaction detail screen with Sepolia active, for the
-// transaction the explorer reports sent to `sentTo`, and wait for its
-// decoded details.
-async function showDetailSentTo(sentTo) {
-    mockSentTo = sentTo;
+// Open the transaction detail screen with `activeNetworkId` active, for the
+// history row `row`, and wait for its decoded details.
+async function showDetail(row, activeNetworkId) {
+    mockSentTo = row.to;
     globalThis.document = makeDocument();
     globalThis.window = { location: { search: "" } };
-    state.networkId = "sepolia";
+    state.networkId = activeNetworkId;
     state.blockscoutUrl = "https://explorer.example/api/v2";
     state.viewData = {};
     state.viewStack = [];
     state.currentView = null;
-    transactionDetail.show({
-        hash: TX_HASH,
-        from: RECIPIENT,
-        to: sentTo,
-        value: "",
-        symbol: "SepoliaETH",
-        timestamp: 1790000000,
-        isError: false,
-        direction: "contract",
-        directionLabel: "Swap",
-        method: "execute",
-        chainId: SEPOLIA,
-    });
+    transactionDetail.show(row);
     for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
 }
 
+// Open the transaction detail screen with `activeNetworkId` active, for the
+// Sepolia transaction the explorer reports sent to `sentTo`, and wait for its
+// decoded details.
+async function showDetailSentTo(sentTo, activeNetworkId) {
+    await showDetail(
+        {
+            hash: TX_HASH,
+            from: RECIPIENT,
+            to: sentTo,
+            value: "",
+            symbol: "SepoliaETH",
+            timestamp: 1790000000,
+            isError: false,
+            direction: "contract",
+            directionLabel: "Swap",
+            method: "execute",
+            chainId: SEPOLIA,
+        },
+        activeNetworkId,
+    );
+}
+
 describe("execute() calldata on the transaction detail screen", () => {
     test("sent to a router on the active network, it is a swap", async () => {
-        await showDetailSentTo(SEPOLIA_ROUTER);
+        await showDetailSentTo(SEPOLIA_ROUTER, "sepolia");
+        expect(node("tx-detail-calldata-details").innerHTML).toContain(
+            "Swap via Uniswap Universal Router",
+        );
+    });
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/623
+    test("sent to a router on its network, with the other network active, it is a swap", async () => {
+        await showDetailSentTo(SEPOLIA_ROUTER, "mainnet");
         expect(node("tx-detail-calldata-details").innerHTML).toContain(
             "Swap via Uniswap Universal Router",
         );
     });
 
     test("sent to an ordinary address, it is not decoded", async () => {
-        await showDetailSentTo(ORDINARY);
+        await showDetailSentTo(ORDINARY, "sepolia");
         expect(node("tx-detail-calldata-action").textContent).toBe("execute");
         expect(node("tx-detail-calldata-details").innerHTML).toBe("");
         expect(node("tx-detail-rawdata").innerHTML).toContain(SWAP_DATA);
     });
 
     test("sent to a router of the other network only, it is not decoded", async () => {
-        await showDetailSentTo(MAINNET_ROUTER);
+        await showDetailSentTo(MAINNET_ROUTER, "sepolia");
         expect(node("tx-detail-calldata-action").textContent).toBe("execute");
         expect(node("tx-detail-calldata-details").innerHTML).toBe("");
         expect(node("tx-detail-rawdata").innerHTML).toContain(SWAP_DATA);
     });
 });
 
+// The history row made from the explorer's answer for RECIPIENT's `method`
+// call sent to the contract `sentTo` on the network with `chainId`. The
+// explorer gives the address in checksummed form.
+async function historyRow(method, sentTo, chainId) {
+    mockHistory = [
+        {
+            hash: TX_HASH,
+            block_number: 7000000,
+            timestamp: "2026-09-01T00:00:00Z",
+            from: { hash: RECIPIENT },
+            to: { hash: getAddress(sentTo), is_contract: true },
+            value: "0",
+            method,
+            status: "ok",
+        },
+    ];
+    const rows = await fetchRecentTransactions(
+        RECIPIENT,
+        "https://explorer.example/api/v2",
+        chainId,
+    );
+    return rows[0];
+}
+
+// The history row's label and TransactionDetail's Type line, for a Sepolia
+// transaction. The active network does not decide either.
+describe.each([
+    ["execute", "Execute"],
+    ["multicall", "Multicall"],
+])("a %s() call in the history", (method, methodLabel) => {
+    test("sent to a router on its network, it is a Swap", async () => {
+        const row = await historyRow(method, SEPOLIA_ROUTER, SEPOLIA);
+        expect(row.directionLabel).toBe("Swap");
+        await showDetail(row, "mainnet");
+        expect(node("tx-detail-type").textContent).toBe("Swap");
+    });
+
+    test("sent to another contract, it is labelled by its method name", async () => {
+        const row = await historyRow(method, OTHER_CONTRACT, SEPOLIA);
+        expect(row.directionLabel).toBe(methodLabel);
+        await showDetail(row, "sepolia");
+        expect(node("tx-detail-type").textContent).toBe("Contract Call");
+    });
+
+    test("sent to a router of the other network only, it is labelled by its method name", async () => {
+        const row = await historyRow(method, MAINNET_ROUTER, SEPOLIA);
+        expect(row.directionLabel).toBe(methodLabel);
+        await showDetail(row, "mainnet");
+        expect(node("tx-detail-type").textContent).toBe("Contract Call");
+    });
+});
+
 // Open the approval screen with Ethereum Mainnet active, for a site's Sepolia
 // transaction that sends SWAP_DATA to `sentTo`.
 async function showApprovalSentTo(sentTo) {

tests/walletDefects.test.js

@@ -475,7 +475,7 @@ describe("every way to a signature or the private key refuses a defective wallet
                 to: RECIPIENT,
                 value: "0x0",
                 data: "0x",
-                chainId: 1,
+                chainId: "0x1",
                 nonce: 0,
                 gasLimit: "21000",
                 maxFeePerGas: "1000000000",