Refuse local-use NAT64 addresses, and IPv4-compatible ones in blocked_networks (closes #299)

The check that keeps pixa from fetching internal addresses let through
64:ff9b:1::/48, the local-use NAT64 range, and matched an address in the
IPv4-compatible form (::/96) against blocked_networks only as IPv6, so
::203.0.113.5 passed with 203.0.113.0/24 listed. The local-use NAT64
range is now blocked next to 64:ff9b::/96, and an address in ::/96 is
refused when blocked_networks holds it as written or the IPv4 address it
holds. The mapped form stays matched as IPv4 only, as Go keeps plain
IPv4 addresses in that form; README.md says so.

Model: opus-5-5

README.md

@@ -316,6 +316,35 @@ once, is refused with 400.
   both optional (values under Signature Specification). Both are part of what is
   cached, so each value of either is a separate cached image.
 
+A source URL's query follows its path after `%3F`, the encoded `?`:
+`/v1/image/<host>/<path>%3F<query>/<size>.<format>`. pixa decodes the
+percent-escapes in the image URL's path once, then reads the host up to the
+first `/`, the size and format after the last `/`, and between them the source
+path up to the first `?` and the source query after it. So the `?` before the
+query, any `?` in the query, and every `%` in the source path or query must be
+percent-encoded, as `%3F` and `%25`. Any other character may be written as
+itself or percent-encoded: `/`, `;`, `,`, `=` and `&` work either way. Neither
+the source path nor the source query may hold a `#`, and an image URL that
+writes one as `%23` is refused with 400. For example,
+`https://cdn.example.com/img?url=https://origin.example.com/my%20cat.jpg` at
+800x600 WebP is
+`/v1/image/cdn.example.com/img%3Furl=https://origin.example.com/my%2520cat.jpg/800x600.webp`,
+signed as shown under Signature Specification.
+
+The source path is the path with its percent-escapes decoded, and pixa fetches
+it percent-encoded again: every character other than letters, digits, `-`, `.`,
+`_`, `~`, `/`, `$`, `&`, `+`, `,`, `:`, `;`, `=` and `@` is sent as a
+percent-escape. So `my%20cat.jpg` in the image URL is the source path
+`/my cat.jpg`, fetched as `/my%20cat.jpg`; `my%2520cat.jpg` is the source path
+`/my%20cat.jpg`, fetched as `/my%2520cat.jpg`; and `100%25.png` is fetched as
+`/100%25.png`. The source query is the source URL's query as that URL writes it,
+its percent-escapes included, and is sent as it is, except that the characters a
+browser percent-encodes in a query (a space, `"`, `'`, `<`, `>`, control
+characters and characters outside ASCII) and a `%` that does not begin a
+percent-escape are percent-encoded. pixa signs and caches the query in that
+form, so `img%3Fname=my%20cat` and `img%3Fname=my%2520cat` in the image URL are
+the same source query, `name=my%20cat`.
+
 A size with one side `0` has that side scaled to keep the source's proportions,
 and is refused with 400 when that side would come out above 8192, the most
 either side may be; so is a size with `fit=outside`, which scales the image to
@@ -430,7 +459,13 @@ nor change what it asks for.
    sent with an empty format, or none, also makes a JPEG XL URL. Width and
    height both empty or `0` keep the original size; if only one of them is empty
    or `0`, that side is scaled to keep the image's proportions. A URL whose
-   scaled side would come out above 8192 answers 400.
+   scaled side would come out above 8192 answers 400, and so does a source URL
+   whose path holds a `..` segment. So does a source URL that the image URL
+   would fetch written another way, and the page then shows the URL pixa would
+   fetch: one with a user name and password, which pixa does not send, or one
+   whose path holds `%2F`, fetched as `/`, or `(`, fetched as `%28`, as pixa
+   keeps the source path decoded and fetches it percent-encoded again (see
+   Routes).
 3. The page shows the URL, `https://<host>/v1/e/<token>/img.<format>`, and when
    it expires. `<host>` is the host the page was opened on, and the URL starts
    with `http` instead while `debug` is on. The name after the token is ignored
@@ -438,9 +473,11 @@ nor change what it asks for.
    `jxl` for a form with no format.
 
 The token holds the source's host, path and query and the size, format, quality,
-fit and expiry, encrypted with a key derived from `signing_key`. The source
-URL's scheme is not kept: the image is fetched like any other (see Routes), and
-the blocked networks still apply.
+fit and expiry, encrypted with a key derived from `signing_key`. The host is
+kept in lower case and an empty path as `/`, as for `/v1/image/`, so
+`https://CDN.Example.com` and `https://cdn.example.com/` are one source image,
+fetched and cached once. The source URL's scheme is not kept: the image is
+fetched like any other (see Routes), and the blocked networks still apply.
 
 How long the URL lasts is chosen on the page, from 1 minute to 1 year, or never.
 The expiry is fixed in the token when the URL is made and cannot be changed or
@@ -492,13 +529,20 @@ Where:
 - `host` — source host as the URL writes it up to the first `/`, in lower case,
   keeping an IPv6 address's brackets and any `:` and port after it (e.g.
   `cdn.example.com`, `cdn.example.com:8443`, `[2001:db8::1]:8443`)
-- `path` — source path (e.g. `/photos/cat.jpg`), with each `%` written as `%25`
-  and each `:` as `%3A`, so `/photos/a:b.jpg` is signed as `/photos/a%3Ab.jpg`
-- `query` — source query string, empty string if none, with `%` and `:` written
-  as in `path`; neither then holds a `:`, so path `/a:b` with no query and path
-  `/a` with query `b:` are signed differently
-- `width` — requested width in pixels, `0` for original
-- `height` — requested height in pixels, `0` for original
+- `path` — source path, with its percent-escapes decoded as under Routes (e.g.
+  `/photos/cat.jpg`, or `/photos/my cat.jpg` for `/photos/my%20cat.jpg`), with
+  each `%` written as `%25` and each `:` as `%3A`, so `/photos/a:b.jpg` is
+  signed as `/photos/a%3Ab.jpg`
+- `query` — source query string as under Routes, empty string if none, with `%`
+  and `:` written as in `path`; neither then holds a `:`, so path `/a:b` with no
+  query and path `/a` with query `b:` are signed differently
+- `width` — requested width in pixels, or `0`: the width is then worked out from
+  the source's proportions and the requested height, rounded down but at least
+  1, or is the source's own width when the height is `0` too (the `orig` size)
+- `height` — requested height in pixels, or `0`: the height is then worked out
+  from the source's proportions and the requested width, rounded down but at
+  least 1, or is the source's own height when the width is `0` too (the `orig`
+  size)
 - `format` — output format, one of those listed under Routes, with `original`
   signed as `orig`, `jpg` as `jpeg`, and no format as `jxl`, so a URL with no
   format has the signature of the same URL ending in `.jxl`; `auto` is signed as
@@ -511,7 +555,10 @@ Where:
   with 400
 - `fit` — the URL's `fit` query parameter (cover, contain, fill, inside,
   outside), or `cover` when the URL has no `fit`; a request whose `fit` is
-  anything else, an empty `fit=` included, is refused with 400
+  anything else, an empty `fit=` included, is refused with 400. `outside` scales
+  the image to cover the requested size, keeping its proportions, so it can come
+  out larger than that size on one side: an 8192x1 source at `100x0`, which is
+  100x1 by its proportions, comes out at 8192x1
 
 The URL's `sig` is the HMAC-SHA256 result in base64url (the URL-safe alphabet of
 RFC 4648) with the trailing `=` padding kept, 44 characters in all. pixa
@@ -535,6 +582,17 @@ For the same image at quality 40 with fit `contain`, the input ends in
 and the URL is
 `/v1/image/cdn.example.com/photos/cat.jpg/800x600.webp?sig=5IwXUx6vf7yefhaUvFzgXZvG2o0Df4RJxPTK3pKq5VU=&exp=1704067200&q=40&fit=contain`.
 
+For a source URL with a query,
+`https://cdn.example.com/img?url=https://origin.example.com/my%20cat.jpg`, at
+800x600 WebP with the same key and expiration and the default quality and fit:
+
+1. Build input, with the query's `:` written as `%3A` and its `%` as `%25`:
+   `cdn.example.com:/img:url=https%3A//origin.example.com/my%2520cat.jpg:800:600:webp:1704067200:85:cover`
+2. The signature is `37aFa9GSVCZM1kRY9SzMOk2fOg_M7Wt5gKNR4xM-FYA=`
+3. URL, with the `?` before the query written as `%3F` and the query's `%` as
+   `%25` (see Routes):
+   `/v1/image/cdn.example.com/img%3Furl=https://origin.example.com/my%2520cat.jpg/800x600.webp?sig=37aFa9GSVCZM1kRY9SzMOk2fOg_M7Wt5gKNR4xM-FYA=&exp=1704067200`
+
 **Allowlist patterns:**
 
 - **Exact match**: `cdn.example.com` — matches only that host
@@ -550,7 +608,11 @@ pixa lower-cases the host of a `/v1/image/` URL before anything else uses it, so
 `CDN.Example.com` is matched, fetched, cached and counted against
 `upstream_connections_per_host` as `cdn.example.com`. Such a URL whose host has
 a port, as in `cdn.example.com:8443`, or a `:` with no port, needs a signature
-even when the host is allowlisted. A host holding `@` is refused with 400.
+even when the host is allowlisted. The host must be a host name or an IPv4
+address (letters, digits, hyphens, underscores and dots) or an IPv6 address in
+brackets, either one optionally followed by `:` and a port. Any other host, such
+as one holding `@`, or a `?`, `#`, `%`, `\` or space written percent-encoded, is
+refused with 400.
 
 ### Configuration
 
@@ -632,7 +694,10 @@ Key settings in more detail:
   and generator pages. Default: empty
 - `blocked_networks` — list of CIDR ranges to refuse for SSRF protection, added
   to the always-enforced built-in ranges (loopback, private, link-local, CGNAT,
-  benchmark, NAT64, and the like); an invalid CIDR aborts startup
+  benchmark, NAT64, and the like); an invalid CIDR aborts startup. An IPv6
+  address in the IPv4-mapped form (`::ffff:a.b.c.d`) is matched only as the IPv4
+  address it holds, so an IPv6 range such as `::/0` refuses neither it nor a
+  plain IPv4 address
 - `trusted_proxies` — list of CIDR ranges of the reverse proxies in front of
   pixa. `X-Forwarded-For` is believed only when the direct peer falls inside one
   of these ranges; the logged and login-recorded client address is then the
@@ -663,11 +728,14 @@ Key settings in more detail:
 - `signing_key` — HMAC secret for URL signatures
 - `db_url` — the SQLite database to open; omitted, it is
   `file:<state_dir>/state.sqlite3?_pragma=journal_mode(WAL)`, which keeps the
-  database in WAL mode. pixa opens one connection to it, so its own reads and
-  writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to any
-  `db_url`, so a write that finds another program writing to the file waits up
-  to five seconds for it instead of failing. WAL mode comes only from the URL:
-  keep `_pragma=journal_mode(WAL)` in one you set
+  database in WAL mode. `state_dir` is percent-encoded in it, so a `%`, `?` or
+  `#` in the name is written as `%25`, `%3F` or `%23`. For a `state_dir` of `/`
+  or one starting with `//` it starts `file:////`, so SQLite does not read the
+  first name in the path as a host. pixa opens one connection to it, so its own
+  reads and writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to
+  any `db_url`, so a write that finds another program writing to the file waits
+  up to five seconds for it instead of failing. WAL mode comes only from the
+  URL: keep `_pragma=journal_mode(WAL)` in one you set
 - `cache_max_bytes` — disk cache size limit in bytes; `0` disables the disk
   cache entirely; omitted defaults to 75% of the sum of the free space on the
   filesystem containing `<state_dir>/cache/` and the bytes of source and

TODO.md

@@ -30,6 +30,114 @@ P2: security: per-origin rate limiting
 
 # Completed Steps
 
+- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
+  addresses refuses the local-use NAT64 range (`64:ff9b:1::/48`, RFC 8215) as it
+  refuses `64:ff9b::/96`, and refuses an IPv6 address in the IPv4-compatible
+  form (`::/96`) when `blocked_networks` contains either the address as written
+  or the IPv4 address it holds (closes #299). A source host such as
+  `[64:ff9b:1::a00:1]` was fetched, which on a network that runs NAT64 on that
+  range reaches the IPv4 address it holds, here `10.0.0.1`; and with
+  `203.0.113.0/24` in `blocked_networks`, `[::ffff:203.0.113.5]` was refused but
+  `[::203.0.113.5]` was fetched. Both now answer 403. The mapped form
+  (`::ffff:a.b.c.d`) is still matched only as the IPv4 address it holds: Go
+  keeps a plain IPv4 address in that form, and an IPv6 entry such as `::/0` must
+  not refuse every IPv4 address.
+- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
+  addresses judges an IPv6 address in the IPv4-compatible form (`::/96`), such
+  as `::127.0.0.1` or `::10.0.0.1`, by the IPv4 address in its last four bytes
+  (closes #297). It read only the mapped form (`::ffff:a.b.c.d`) as IPv4, so a
+  source host such as `[::127.0.0.1]` was checked as a public IPv6 address and
+  fetched, which on a network that routes it reaches the internal IPv4 host; it
+  is now refused with 403. The NAT64 form (`64:ff9b::/96`) was already refused
+  as a whole, as one of the built-in blocked ranges, and still is.
+- 2026-10-16 a source host that is an IPv6 address in brackets with no port,
+  such as `[2001:db8::a]`, is fetched like one with a port, through `/v1/image/`
+  and through an encrypted URL (closes #295). The fetcher's check of the source
+  URL kept the brackets when no port followed them, could not look the host up,
+  and the request answered 500. It now checks the address without brackets, so a
+  private one is refused with 403, as with a port.
+- 2026-10-16 a `state_dir` whose name holds `%`, `?` or `#` keeps its database
+  at `state.sqlite3` in that directory (closes #290): the `db_url` derived from
+  it put the name into a `file:` URL as it was, so SQLite read `%41` as `A`, a
+  `?` or `#` ended the path early, and the journal mode parameter was lost. The
+  derived `db_url` is now built with Go's `net/url`, which writes those
+  characters as `%25`, `%3F` and `%23`. For a `state_dir` of `/` or one starting
+  with `//` it starts `file:////`, so SQLite no longer reads the first name in
+  the path as a host.
+- 2026-10-16 a size with one side `0` keeps the side computed from the source's
+  proportions at 1 or more (closes #283): it was rounded down, so for a thin
+  source it came out at 0, and libvips then made the size square. An 8192x1
+  source at `100x0` came out at 100x100, and at `1300x0` with `fit=cover` made
+  libvips ask for about 39 GB at once; an 8192x2 source at `100x0` answered 500.
+  `fit=contain` and `fit=inside` work both sides out again from the smaller of
+  the two scales and `fit=outside` from the larger, and each keeps both sides at
+  1 or more too, so a 1x8192 source at `0x100` with `fit=contain`, and a 49x8192
+  source at `0x100` or a 49x49 source at `1x1` with `fit=outside`, no longer
+  answer 500. An 8192x1 source at `1300x0` now comes out at 1300x1, and the
+  process running it alone peaked at about 34 MiB resident. With `fit=outside`
+  the image is scaled to cover the size, so that source at `100x0` comes out at
+  8192x1. `README.md` now says this under Signature Specification, and says how
+  a `0` side is worked out where it said `0` meant the original.
+- 2026-10-16 the generator page lower-cases the source host and writes an empty
+  source path as `/` before it makes the encrypted URL, as `/v1/image/` does
+  (closes #293). A host written in upper and in lower case, or a source URL with
+  no path and with the path `/`, made two cache keys and two upstream requests
+  for one image.
+- 2026-10-16 the source URL a request fetches is built with `net/url` from the
+  source host, path and query, not joined as text (closes #288). The source
+  path, decoded, is fetched percent-encoded again, so `100%25.png` fetches
+  `/100%25.png` where it answered 401, and `my%20cat.png` and `my%2520cat.png`
+  fetch different paths where both fetched `/my%20cat.png` under two cache keys.
+  The source query stays as the source URL writes it; the characters a browser
+  percent-encodes in a query, such as `'` or a space, which was sent raw and
+  answered 502, are percent-encoded when the image URL is read, so the query is
+  signed and cached as it is sent. The generator page answers 400, showing the
+  URL pixa would fetch, for a source URL its image URL would fetch written
+  another way, such as with `%2F` in the path, whatever else the path holds, or
+  with a user name and password. It also answers 400 for a source path holding a
+  `..` segment, as `/v1/image/` refuses one.
+- 2026-10-15 a thin source requested with `fit=cover` no longer makes libvips
+  build a huge image (closes #282): libvips' thumbnail scaled the whole source
+  to cover the requested size and copied that into memory before it cut out the
+  centre, so an 8192x64 source at 8192x8192 made it allocate about 24 GiB, and
+  an 8192x1 source answered 500. The image processor now first cuts the centre
+  of the source, widened to whole source pixels, and thumbnail scales and cuts
+  only that, by the same amount on both sides as before. What it copies into
+  memory is then larger than the output by less than one scaled source pixel on
+  each side. With the runtime image's libvips and JPEG output at 8192x8192,
+  resident memory peaked at about 242 MiB for the 8192x64 source and 431 MiB for
+  the 8192x1 one. The output can sit a fraction of an output pixel from where it
+  was.
+- 2026-10-15 a `/v1/image/` URL whose source path or source query holds a `#`,
+  written as `%23`, is refused with 400 (closes #286): the source URL built from
+  it ended at the `#` when fetched, so each text after it fetched the same
+  upstream image, without a signature for an allowlisted host, and cached it
+  under keys of its own. `README.md` says neither may hold a `#`.
+- 2026-10-15 the host of a `/v1/image/` URL must be a host name or an IPv4
+  address (letters, digits, hyphens, underscores and dots) or an IPv6 address in
+  brackets, either one optionally followed by `:` and a port, and any other host
+  is refused with 400 (closes #275): only `@` was refused, so a `?` written as
+  `%3F` gave the host `cdn.example.com?x=1`, which Go's URL parser reads as
+  `cdn.example.com` with a query. Such a URL passed the allowlist, and each text
+  after the `?` fetched the host's root path and cached the answer under keys of
+  its own. A `#`, `%`, `\` or space written percent-encoded is refused the same
+  way, and so is an IPv6 address without brackets, which needed a signature
+  before. Underscores are kept because `allowlist_hosts` accepts host names
+  holding them.
+- 2026-10-15 the README says how a source URL with a query is written into an
+  image URL, and the image route accepts it (closes #255): the query follows the
+  source path after `%3F`. pixa now reads the image URL's path decoded once, so
+  the `?` before the query, any `?` in it and every `%` in the source path or
+  query must be percent-encoded, and any other character may be. The route used
+  to parse chi's wildcard, which holds the path as the client wrote it whenever
+  that is not Go's own encoding of it; a `/`, `;` or `,` in the query written as
+  `%2F`, `%3B` or `%2C`, as `GenerateSignedURL` wrote them, kept the `%3F` from
+  being read as `?`, and the request failed with 401. `GenerateSignedURL` now
+  writes Go's own encoding of the path. The README has an example with a query
+  and its signature. The path traversal check no longer reads the source query,
+  and keeps a `%` that does not start a percent-escape as it is instead of
+  refusing the URL, so a source path or query holding `%25` is accepted, while a
+  double-encoded `..` next to such a `%` is still refused.
 - 2026-10-15 `max_concurrent_processing` defaults to half the CPUs pixa sees,
   rounded down, and at least 1 (closes #242): it defaulted to one image per CPU,
   and a container with no CPU limit sees every CPU of the host, so on a 48-CPU

internal/config/config.go

@@ -338,8 +338,7 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 				settingName(keyDBURL), errValueEmpty)
 		}
 
-		// The driver sets the journal mode only through a _pragma parameter.
-		c.DBURL = fmt.Sprintf("file:%s/state.sqlite3?_pragma=journal_mode(WAL)", c.StateDir)
+		c.DBURL = defaultDBURL(c.StateDir)
 	}
 
 	if loader.err != nil {
@@ -354,6 +353,30 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 	return c, nil
 }
 
+// defaultDBURL returns the db_url used when db_url is omitted: the file
+// state.sqlite3 in stateDir, in WAL mode, which the driver sets only
+// through a _pragma parameter. String() percent-encodes any %, ? or # in
+// the directory name, which SQLite decodes back, so the URL names exactly
+// this file. OmitHost writes file:/var/lib/pixa/... instead of
+// file:///var/lib/pixa/..., and keeps a relative stateDir from being read
+// as a host name. The path written into the URL is stateDir followed by
+// /state.sqlite3; when it starts with //, as it does for a stateDir of /
+// or one starting with //, the empty host is kept, so the URL starts
+// file://// and SQLite does not read the first name in the path as a
+// host.
+func defaultDBURL(stateDir string) string {
+	dbPath := stateDir + "/state.sqlite3"
+
+	dbURL := url.URL{
+		Scheme:   "file",
+		OmitHost: !strings.HasPrefix(dbPath, "//"),
+		Path:     dbPath,
+		RawQuery: "_pragma=journal_mode(WAL)",
+	}
+
+	return dbURL.String()
+}
+
 // validateKnownKeys rejects configuration files containing keys the
 // application does not understand, so typos fail at startup instead of
 // being silently ignored, and rejects keys that are explicitly set to

internal/config/config_validation_internal_test.go

@@ -135,6 +135,104 @@ func TestDefaultDBURLOpensTheDatabaseInWALMode(t *testing.T) {
 	}
 }
 
+// TestDerivedDBURLOpensStateDirHoldingURLCharacters opens the db_url
+// derived from a state_dir whose name holds %41, ? and #, and checks that
+// the database is state.sqlite3 in that directory, in WAL mode. Put into
+// a file: URL as it is, the name would lose its meaning: %41 is read as
+// A, and the path ends at the ?, which also loses the journal mode.
+func TestDerivedDBURLOpensStateDirHoldingURLCharacters(t *testing.T) {
+	t.Parallel()
+
+	stateDir := filepath.Join(t.TempDir(), "a%41b?c#d")
+
+	err := os.Mkdir(stateDir, 0o750)
+	if err != nil {
+		t.Fatalf("failed to create %q: %v", stateDir, err)
+	}
+
+	// Quoted so YAML takes the whole name as it is.
+	c, err := configFromYAML(t, signingKeyLine+"state_dir: '"+stateDir+"'\n")
+	if err != nil {
+		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
+	}
+
+	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
+
+	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(stateDir, "state.sqlite3"))
+}
+
+// TestDerivedDBURLOpensStateDirStartingWithTwoSlashes opens the db_url
+// derived from a state_dir that starts with //, and checks that the
+// database is state.sqlite3 in that directory, in WAL mode. Written right
+// after file:, such a name gives a URL starting file://, and SQLite reads
+// the first directory name as a host and refuses to open it.
+func TestDerivedDBURLOpensStateDirStartingWithTwoSlashes(t *testing.T) {
+	t.Parallel()
+
+	dir := t.TempDir()
+	stateDir := "/" + dir
+
+	c, err := configFromYAML(t, signingKeyLine+"state_dir: "+stateDir+"\n")
+	if err != nil {
+		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
+	}
+
+	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
+
+	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(dir, "state.sqlite3"))
+}
+
+// TestDerivedDBURLForRootStateDir checks the db_url derived from a
+// state_dir of /. The path written into the URL is then
+// //state.sqlite3, and written right after file: it gives a URL starting
+// file://, where SQLite reads state.sqlite3 as a host and refuses to open
+// it. The test only checks the URL, since it cannot write to /.
+func TestDerivedDBURLForRootStateDir(t *testing.T) {
+	t.Parallel()
+
+	c, err := configFromYAML(t, signingKeyLine+"state_dir: /\n")
+	if err != nil {
+		t.Fatalf("config with state_dir / should be valid, got: %v", err)
+	}
+
+	t.Logf("state_dir / gives db_url %q", c.DBURL)
+
+	wantDBURL := "file:////state.sqlite3?_pragma=journal_mode(WAL)"
+	if c.DBURL != wantDBURL {
+		t.Errorf("DBURL = %q, want %q", c.DBURL, wantDBURL)
+	}
+}
+
+// checkDBURLOpensFileInWALMode opens dbURL with the SQLite driver pixad
+// uses, and checks that the database is in WAL mode and is the file
+// dbFile.
+func checkDBURLOpensFileInWALMode(t *testing.T, dbURL, dbFile string) {
+	t.Helper()
+
+	db, err := sql.Open("sqlite", dbURL)
+	if err != nil {
+		t.Fatalf("failed to open %q: %v", dbURL, err)
+	}
+
+	t.Cleanup(func() { _ = db.Close() })
+
+	var journalMode string
+
+	err = db.QueryRowContext(t.Context(), "PRAGMA journal_mode").Scan(&journalMode)
+	if err != nil {
+		t.Fatalf("failed to read the journal mode of %q: %v", dbURL, err)
+	}
+
+	if journalMode != "wal" {
+		t.Errorf("journal mode of %q = %q, want wal", dbURL, journalMode)
+	}
+
+	_, err = os.Stat(dbFile)
+	if err != nil {
+		t.Errorf("opening %q did not create %q: %v", dbURL, dbFile, err)
+	}
+}
+
 func TestExplicitValidValuesAreUsed(t *testing.T) {
 	t.Parallel()
 

internal/handlers/auth.go

@@ -9,7 +9,9 @@ import (
 	"math"
 	"net/http"
 	"net/url"
+	"slices"
 	"strconv"
+	"strings"
 	"time"
 
 	"sneak.berlin/go/pixa/internal/clientip"
@@ -125,7 +127,7 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 		sourceURL := r.FormValue("url")
 
 		// Validate source URL
-		parsed, err := url.Parse(sourceURL)
+		parsed, err := parseSourceURL(sourceURL)
 		if err != nil || parsed.Host == "" {
 			s.renderGeneratorWithForm(w, r, "Invalid source URL", r.Form,
 				http.StatusBadRequest)
@@ -133,6 +135,16 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 			return
 		}
 
+		// /v1/image/ refuses a ".." segment in the source path, and so does
+		// the generator. The path is decoded, so %2e%2e counts too
+		if slices.Contains(strings.Split(parsed.Path, "/"), "..") {
+			s.renderGeneratorWithForm(w, r,
+				"Source URL path cannot hold a .. segment", r.Form,
+				http.StatusBadRequest)
+
+			return
+		}
+
 		payload, expiresAt, ttl, err := buildGeneratePayload(parsed, r.Form)
 		if err != nil {
 			s.renderGeneratorWithForm(w, r, err.Error(), r.Form,
@@ -141,6 +153,19 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 			return
 		}
 
+		// The image URL must fetch the source URL as it was written
+		sourceRequest := payload.ToImageRequest()
+		sourceRequest.AllowHTTP = s.config.AllowHTTP
+		fetchURL := sourceRequest.SourceURL()
+
+		if !fetchedAsWritten(parsed, fetchURL) {
+			s.renderGeneratorWithForm(w, r, "Source URL cannot be fetched as "+
+				"written: pixa would fetch "+fetchURL,
+				r.Form, http.StatusBadRequest)
+
+			return
+		}
+
 		// Generate encrypted token
 		token, err := s.encGen.Generate(payload)
 		if err != nil {
@@ -173,6 +198,48 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 	}
 }
 
+// parseSourceURL parses the source URL entered on the generator page with its
+// host lower-cased and an empty path written as "/", as /v1/image/ reads a
+// source URL, so that each spelling of one source URL makes one cache key and
+// one upstream request.
+func parseSourceURL(sourceURL string) (*url.URL, error) {
+	parsed, err := url.Parse(sourceURL)
+	if err != nil {
+		return nil, err
+	}
+
+	parsed.Host = strings.ToLower(parsed.Host)
+
+	if parsed.Path == "" {
+		parsed.Path = "/"
+	}
+
+	return parsed, nil
+}
+
+// fetchedAsWritten reports whether fetchURL, the URL pixa fetches for an
+// image URL made from the source URL source, is source as it was written,
+// apart from the scheme, which the token does not keep. It is not when source
+// holds a user name and password, which the token does not keep either, or a
+// "?" with no query after it. The token keeps the source path decoded and
+// pixa fetches it percent-encoded again, so a path written another way, such
+// as with %2F, is fetched as another path. url.URL keeps the path as written
+// in RawPath when it is not the decoded path percent-encoded again.
+// EscapedPath ignores RawPath when it also holds a character net/url encodes,
+// such as a space, so RawPath is compared itself.
+func fetchedAsWritten(source *url.URL, fetchURL string) bool {
+	writtenPath := source.RawPath
+	if writtenPath == "" {
+		writtenPath = source.EscapedPath()
+	}
+
+	fetched, err := url.Parse(fetchURL)
+
+	return err == nil && source.User == nil && !source.ForceQuery &&
+		fetched.EscapedPath() == writtenPath &&
+		fetched.RawQuery == source.RawQuery
+}
+
 // buildGeneratePayload parses the numeric form fields and assembles the
 // encrypted URL payload. ttl=0 means never expires (ExpiresAt stays 0). A
 // non-numeric or out-of-range width, height, quality or ttl, or an

internal/handlers/image.go

@@ -9,7 +9,6 @@ import (
 	"strconv"
 	"time"
 
-	"github.com/go-chi/chi/v5"
 	"github.com/go-chi/chi/v5/middleware"
 	"sneak.berlin/go/pixa/internal/encurl"
 	"sneak.berlin/go/pixa/internal/httpfetcher"
@@ -80,20 +79,21 @@ func (s *Handlers) HandleRobotsTxt() http.HandlerFunc {
 	}
 }
 
-// parseImageRequest parses the wildcard path and query parameters into
+// parseImageRequest parses the image URL's path and query parameters into
 // an ImageRequest. On invalid input it writes an error response and
 // returns false.
 func (s *Handlers) parseImageRequest(
 	w http.ResponseWriter, r *http.Request,
 ) (*imgcache.ImageRequest, bool) {
-	// Get the wildcard path from chi
-	pathParam := chi.URLParam(r, "*")
-
-	// Parse the URL path
-	parsed, err := imgcache.ParseImagePath(pathParam)
+	// The path is parsed decoded once, as r.URL.Path holds it, and not from
+	// chi's wildcard: chi routes on the path as the client wrote it whenever
+	// that is not Go's own encoding of it, so its wildcard would still hold
+	// the %3F before a source query when, say, a "/" in the query is written
+	// as %2F
+	parsed, err := imgcache.ParseImageURL(r.URL.Path)
 	if err != nil {
 		s.log.Warn("failed to parse image URL",
-			"path", pathParam,
+			"path", r.URL.Path,
 			"error", err,
 		)
 		s.respondError(w, "invalid image URL: "+err.Error(), http.StatusBadRequest)

internal/handlers/image_errors_internal_test.go

@@ -264,3 +264,127 @@ func TestHandleImage_AllowlistOrSignature(t *testing.T) {
 		})
 	}
 }
+
+// TestHandleImage_InvalidHost_Returns400 sends image URLs whose host no URL
+// host can be, and checks that each is refused with 400 naming the host as
+// decoded: allowlistedHost with a character after it that a URL host cannot
+// hold, percent-encoded, an IPv6 address without brackets, and brackets
+// around something that is not an IPv6 address. A "?" or "#" after
+// allowlistedHost would otherwise end the host when the source URL is read,
+// so the request would pass the allowlist and be fetched and cached under a
+// host that is not the one fetched.
+func TestHandleImage_InvalidHost_Returns400(t *testing.T) {
+	t.Parallel()
+
+	photos := newPhotoFetcher(t, allowlistedHost)
+
+	tests := []struct {
+		name        string
+		writtenHost string
+		decodedHost string
+	}{
+		{"? written as %3F", allowlistedHost + "%3Fx=1", allowlistedHost + "?x=1"},
+		{"# written as %23", allowlistedHost + "%23x", allowlistedHost + "#x"},
+		{"% written as %25", allowlistedHost + "%253F", allowlistedHost + "%3F"},
+		{`\ written as %5C`, allowlistedHost + "%5Cx", allowlistedHost + `\x`},
+		{"space written as %20", allowlistedHost + "%20", allowlistedHost + " "},
+		{"IPv6 address without brackets", "2001:db8::1", "2001:db8::1"},
+		{"IPv4 address in brackets", "[203.0.113.5]", "[203.0.113.5]"},
+		{"no address in brackets", "[abc]", "[abc]"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			rec := sendGet(t, newImageRoute(t, photos), photoURL(tt.writtenHost))
+			checkErrorBody(t, rec, http.StatusBadRequest,
+				fmt.Sprintf("invalid image URL: invalid source host: %q",
+					tt.decodedHost))
+		})
+	}
+}
+
+// TestHandleImage_HostForms_Served checks that the image route serves, with
+// a valid signature, the image at photoPath on a host name, an IPv4 address,
+// an IPv6 address in brackets, and a host followed by ":" with or without a
+// port.
+func TestHandleImage_HostForms_Served(t *testing.T) {
+	t.Parallel()
+
+	hosts := []string{
+		allowlistedHost,
+		"img_1.example.com",
+		"203.0.113.5",
+		"[2001:db8::1]",
+		allowlistedHost + ":8443",
+		"[2001:db8::1]:8443",
+		allowlistedHost + ":",
+	}
+
+	photos := newPhotoFetcher(t, hosts...)
+	exp := time.Now().Add(time.Hour)
+
+	for _, host := range hosts {
+		t.Run(host, func(t *testing.T) {
+			t.Parallel()
+
+			sig := photoSignature(testSigningKey, host, exp)
+
+			rec := sendGet(t, newImageRoute(t, photos),
+				photoURLWithSig(host, sig, exp))
+			if rec.Code != http.StatusOK {
+				t.Errorf("status = %d, want %d: %s",
+					rec.Code, http.StatusOK, rec.Body)
+			}
+		})
+	}
+}
+
+// TestHandleImage_HashInSourcePathOrQuery_Returns400 sends image URLs whose
+// source path or source query holds a "#", written as %23, and checks that
+// each is refused with 400, the one signed for that source path included. The
+// source URL would otherwise end at the "#" when it is fetched, so each text
+// after it would fetch the image at photoPath and cache it under keys of its
+// own.
+func TestHandleImage_HashInSourcePathOrQuery_Returns400(t *testing.T) {
+	t.Parallel()
+
+	photos := newPhotoFetcher(t, allowlistedHost, signedHost)
+	exp := time.Now().Add(time.Hour)
+
+	sig := signature.New(testSigningKey).Sign(&signature.Request{
+		SourceHost: signedHost,
+		SourcePath: photoPath + "#x",
+		Width:      50,
+		Height:     50,
+		Format:     string(imgcache.FormatJPEG),
+		Quality:    85,
+		FitMode:    string(imgcache.FitCover),
+		Expires:    exp,
+	})
+
+	tests := []struct {
+		name   string
+		target string
+	}{
+		{"# in the source path",
+			"/v1/image/" + allowlistedHost + photoPath + "%23x/50x50.jpeg"},
+		{"# in the source query",
+			"/v1/image/" + allowlistedHost + photoPath + "%3Fv=1%23x/50x50.jpeg"},
+		{"# in the source path, signed",
+			fmt.Sprintf("/v1/image/%s%s%%23x/50x50.jpeg?sig=%s&exp=%d",
+				signedHost, photoPath, sig, exp.Unix())},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			rec := sendGet(t, newImageRoute(t, photos), tt.target)
+			checkErrorBody(t, rec, http.StatusBadRequest,
+				`invalid image URL: invalid image path: `+
+					`the source path or query holds a "#"`)
+		})
+	}
+}

internal/handlers/image_signature_internal_test.go

@@ -169,3 +169,166 @@ func TestHandleImage_InvalidExp_Returns400(t *testing.T) {
 		})
 	}
 }
+
+// TestHandleImage_GeneratedSignedURLWithSourceQueryVerifies sends URLs built
+// by the service's signed-URL generator for source URLs with a query to the
+// route, through a chi router: chi routes on the path as the client wrote it
+// whenever that is not Go's own encoding of it. A 502 means the signature
+// passed, so the route read the source path and query that were signed.
+func TestHandleImage_GeneratedSignedURLWithSourceQueryVerifies(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name  string
+		query string
+	}{
+		{"slash and colon", "url=https://origin.example.com/cat.jpg"},
+		{"semicolon", "a=1;b=2"},
+		{"comma", "crop=0,0,50,50"},
+		{"equals and ampersand", "a=1&b=2"},
+		{"percent-escape", "name=my%20cat"},
+		{"question mark", "next=/a?b=1"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			fix := setupTestHandler(t)
+
+			signedURL, err := fix.service.GenerateSignedURL("", &imgcache.ImageRequest{
+				SourceHost:  signedHost,
+				SourcePath:  photoPath,
+				SourceQuery: tt.query,
+				Size:        imgcache.Size{Width: 50, Height: 50},
+				Format:      imgcache.FormatJPEG,
+			}, time.Hour)
+			if err != nil {
+				t.Fatalf("GenerateSignedURL() error = %v", err)
+			}
+
+			status := getImage(t, fix, signedURL)
+			if status != http.StatusBadGateway {
+				t.Errorf("status = %d, want %d", status, http.StatusBadGateway)
+			}
+		})
+	}
+}
+
+// TestHandleImage_SourceQueryEncodedAnyWay signs one source URL with a query
+// and writes it into the image URL in ways the README allows: the "?" before
+// the query and each "%" in it percent-encoded, and every other character as
+// itself or percent-encoded. A 502 means the signature passed.
+func TestHandleImage_SourceQueryEncodedAnyWay(t *testing.T) {
+	t.Parallel()
+
+	expires := time.Now().Add(time.Hour)
+	signer := signature.New("test-signing-key-must-be-32-chars")
+	sig := signer.Sign(&signature.Request{
+		SourceHost:  signedHost,
+		SourcePath:  photoPath,
+		SourceQuery: "url=https://origin.example.com/my%20cat.jpg",
+		Width:       50,
+		Height:      50,
+		Format:      string(imgcache.FormatJPEG),
+		Quality:     85,
+		FitMode:     string(imgcache.FitCover),
+		Expires:     expires,
+	})
+
+	tests := []struct {
+		name         string
+		writtenQuery string
+	}{
+		{"only ? and % encoded",
+			"%3Furl=https://origin.example.com/my%2520cat.jpg"},
+		{"every reserved character encoded",
+			"%3Furl%3Dhttps%3A%2F%2Forigin.example.com%2Fmy%2520cat.jpg"},
+		{"lower-case hex digits",
+			"%3furl=https://origin.example.com/my%2520cat.jpg"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			target := fmt.Sprintf("/v1/image/%s%s%s/50x50.jpeg?sig=%s&exp=%d",
+				signedHost, photoPath, tt.writtenQuery, sig, expires.Unix())
+
+			status := getImage(t, setupTestHandler(t), target)
+			if status != http.StatusBadGateway {
+				t.Errorf("status = %d, want %d", status, http.StatusBadGateway)
+			}
+		})
+	}
+}
+
+// TestHandleImage_SourceURLHoldingPercent25Verifies signs a source path and a
+// source query that each hold %25, the percent-escape of a literal "%", and
+// sends each to the route written as the README says, with that "%" written as
+// %25, and as GenerateSignedURL writes it. A 502 means the signature passed.
+func TestHandleImage_SourceURLHoldingPercent25Verifies(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name        string
+		sourcePath  string
+		sourceQuery string
+		// writtenPathAndQuery is the source path and query as the README says
+		// to write them into the image URL
+		writtenPathAndQuery string
+	}{
+		{"path", "/sale/50%25off.jpg", "", "/sale/50%2525off.jpg"},
+		{"query", photoPath, "discount=50%25", photoPath + "%3Fdiscount=50%2525"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name+" written by the README rule", func(t *testing.T) {
+			t.Parallel()
+
+			expires := time.Now().Add(time.Hour)
+			signer := signature.New("test-signing-key-must-be-32-chars")
+			sig := signer.Sign(&signature.Request{
+				SourceHost:  signedHost,
+				SourcePath:  tt.sourcePath,
+				SourceQuery: tt.sourceQuery,
+				Width:       50,
+				Height:      50,
+				Format:      string(imgcache.FormatJPEG),
+				Quality:     85,
+				FitMode:     string(imgcache.FitCover),
+				Expires:     expires,
+			})
+
+			target := fmt.Sprintf("/v1/image/%s%s/50x50.jpeg?sig=%s&exp=%d",
+				signedHost, tt.writtenPathAndQuery, sig, expires.Unix())
+
+			status := getImage(t, setupTestHandler(t), target)
+			if status != http.StatusBadGateway {
+				t.Errorf("status = %d, want %d", status, http.StatusBadGateway)
+			}
+		})
+
+		t.Run(tt.name+" written by GenerateSignedURL", func(t *testing.T) {
+			t.Parallel()
+
+			fix := setupTestHandler(t)
+
+			signedURL, err := fix.service.GenerateSignedURL("", &imgcache.ImageRequest{
+				SourceHost:  signedHost,
+				SourcePath:  tt.sourcePath,
+				SourceQuery: tt.sourceQuery,
+				Size:        imgcache.Size{Width: 50, Height: 50},
+				Format:      imgcache.FormatJPEG,
+			}, time.Hour)
+			if err != nil {
+				t.Fatalf("GenerateSignedURL() error = %v", err)
+			}
+
+			status := getImage(t, fix, signedURL)
+			if status != http.StatusBadGateway {
+				t.Errorf("status = %d, want %d", status, http.StatusBadGateway)
+			}
+		})
+	}
+}

internal/httpfetcher/httpfetcher.go

@@ -59,15 +59,17 @@ const (
 // builtinBlockedPrefixes are internal or special-use ranges that Go's
 // net.IP predicates (IsPrivate, IsLinkLocalUnicast, and the like) do not
 // already cover. They are always blocked, in addition to any
-// operator-supplied networks. IPv4-mapped IPv6 addresses are unmapped
-// before matching, so these IPv4 ranges are caught in both forms.
+// operator-supplied networks. IPv4-mapped and IPv4-compatible IPv6
+// addresses are read as the IPv4 address they hold before matching, so
+// these IPv4 ranges are caught in all three forms.
 //
 //nolint:gochecknoglobals // immutable built-in blocklist
 var builtinBlockedPrefixes = []netip.Prefix{
-	netip.MustParsePrefix("100.64.0.0/10"), // RFC 6598 CGNAT / carrier-grade NAT
-	netip.MustParsePrefix("192.0.0.0/24"),  // RFC 6890 IETF protocol assignments
-	netip.MustParsePrefix("198.18.0.0/15"), // RFC 2544 benchmarking range
-	netip.MustParsePrefix("64:ff9b::/96"),  // RFC 6052 NAT64 (maps onto IPv4)
+	netip.MustParsePrefix("100.64.0.0/10"),  // RFC 6598 CGNAT / carrier-grade NAT
+	netip.MustParsePrefix("192.0.0.0/24"),   // RFC 6890 IETF protocol assignments
+	netip.MustParsePrefix("198.18.0.0/15"),  // RFC 2544 benchmarking range
+	netip.MustParsePrefix("64:ff9b::/96"),   // RFC 6052 NAT64 (maps onto IPv4)
+	netip.MustParsePrefix("64:ff9b:1::/48"), // RFC 8215 local-use NAT64 (maps onto IPv4)
 }
 
 // Fetcher errors.
@@ -473,16 +475,16 @@ func validateURL(ctx context.Context, rawURL string, allowHTTP bool) error {
 		return ErrUnsupportedScheme
 	}
 
-	// Parse to extract host
-	host := extractHost(rawURL)
-	if host == "" {
-		return ErrInvalidHost
+	parsedURL, err := neturl.Parse(rawURL)
+	if err != nil {
+		return fmt.Errorf("%w: %w", ErrInvalidHost, err)
 	}
 
-	// Remove port if present
-	h, _, err := net.SplitHostPort(host)
-	if err == nil {
-		host = h
+	// Hostname drops any port, and the brackets of an IPv6 address whether
+	// or not a port follows them
+	host := parsedURL.Hostname()
+	if host == "" {
+		return ErrInvalidHost
 	}
 
 	// Block obvious localhost patterns
@@ -543,6 +545,9 @@ func isPrivateIP(ip net.IP) bool {
 		return true
 	}
 
+	// An IPv4-compatible IPv6 address is judged as the IPv4 address it holds
+	ip = ipv4CompatibleToIPv4(ip)
+
 	// Check for loopback
 	if ip.IsLoopback() {
 		return true
@@ -594,7 +599,12 @@ func isPrivateIP(ip net.IP) bool {
 }
 
 // isBlockedIP reports whether ip is refused, either by the built-in
-// internal-range check or by one of the operator-supplied prefixes.
+// internal-range check or by one of the operator-supplied prefixes. An
+// IPv4-compatible address (in ::/96) is refused when a prefix contains the
+// address as written or the IPv4 address it holds. An IPv4-mapped address (in
+// ::ffff:0:0/96) is matched only as the IPv4 address it holds: Go keeps a
+// plain IPv4 address in that form too, and an IPv6 prefix such as ::/0 must
+// not refuse every IPv4 address.
 func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 	if isPrivateIP(ip) {
 		return true
@@ -607,11 +617,28 @@ func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 
 	addr = addr.Unmap()
 
+	// ip read as IPv4 where it is or holds an IPv4 address, otherwise the
+	// zero netip.Addr, which no prefix contains. Matching asIPv4 as well as
+	// addr refuses more only for an IPv4-compatible address.
+	asIPv4, _ := netip.AddrFromSlice(ipv4CompatibleToIPv4(ip).To4())
+
 	return slices.ContainsFunc(blocked, func(prefix netip.Prefix) bool {
-		return prefix.Contains(addr)
+		return prefix.Contains(addr) || prefix.Contains(asIPv4)
 	})
 }
 
+// ipv4CompatibleToIPv4 returns the IPv4 address that an IPv4-compatible IPv6
+// address (in ::/96, such as ::127.0.0.1) holds in its last four bytes, and
+// any other address unchanged.
+func ipv4CompatibleToIPv4(ip net.IP) net.IP {
+	addr, ok := netip.AddrFromSlice(ip)
+	if ok && netip.MustParsePrefix("::/96").Contains(addr) {
+		return ip[12:]
+	}
+
+	return ip
+}
+
 // ssrfSafeDialer validates IP addresses against the built-in blocked ranges
 // before connecting. New wraps dialSSRFSafe with the operator-supplied
 // blocklist; this entry point enforces the built-in ranges alone.

internal/httpfetcher/httpfetcher_internal_test.go

@@ -186,6 +186,44 @@ func TestIsPrivateIP(t *testing.T) {
 	}
 }
 
+// TestIsPrivateIPJudgesEmbeddedIPv4Address checks IPv6 addresses that hold an
+// IPv4 address in their last four bytes: the IPv4-compatible form (::/96) and
+// the NAT64 form (64:ff9b::/96). One holding a loopback, private or
+// link-local IPv4 address is refused as that address is, and one holding a
+// public IPv4 address in the IPv4-compatible form passes.
+func TestIsPrivateIPJudgesEmbeddedIPv4Address(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		ip   string
+		want bool
+	}{
+		{"::127.0.0.1", true},       // loopback
+		{"::10.0.0.1", true},        // private
+		{"::169.254.169.254", true}, // link-local
+		{"64:ff9b::7f00:1", true},   // NAT64 form of 127.0.0.1
+		{"::8.8.8.8", false},        // public
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.ip, func(t *testing.T) {
+			t.Parallel()
+
+			ip := net.ParseIP(tc.ip)
+			if ip == nil {
+				t.Fatalf("failed to parse IP %q", tc.ip)
+			}
+
+			got := isPrivateIP(ip)
+			t.Logf("isPrivateIP(%s) = %v", ip, got)
+
+			if got != tc.want {
+				t.Errorf("isPrivateIP(%q) = %v, want %v", tc.ip, got, tc.want)
+			}
+		})
+	}
+}
+
 func TestValidateURL_RejectsNonHTTPS(t *testing.T) {
 	t.Parallel()
 

internal/imageprocessor/computed_side_internal_test.go

@@ -50,3 +50,69 @@ func TestImageProcessor_RefusesComputedSideAboveMaximum(t *testing.T) {
 		})
 	}
 }
+
+// TestImageProcessor_ComputedSideIsAtLeastOne verifies that, for a size with
+// one side 0, the side computed from the input's proportions is 1 where it
+// would round down to 0, and that Process makes that size in every fit mode
+// but FitOutside, which scales the input to cover the size and so can make
+// it longer. Each case checks the size targetDimensions gives before it
+// calls Process: with that side at 0, an 8192x1 input at 1300x0 makes
+// libvips ask for about 39 GB with FitCover.
+func TestImageProcessor_ComputedSideIsAtLeastOne(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name                    string
+		inputWidth, inputHeight int
+		size                    Size
+		wantWidth, wantHeight   int
+	}{
+		{"8192x1 at 100x0", 8192, 1, Size{Width: 100}, 100, 1},
+		{"8192x1 at 1300x0", 8192, 1, Size{Width: 1300}, 1300, 1},
+		{"8192x2 at 100x0", 8192, 2, Size{Width: 100}, 100, 1},
+		{"1x8192 at 0x100", 1, 8192, Size{Height: 100}, 1, 100},
+		{"1x8192 at 0x1300", 1, 8192, Size{Height: 1300}, 1, 1300},
+		{"2x8192 at 0x100", 2, 8192, Size{Height: 100}, 1, 100},
+	}
+
+	fits := []FitMode{FitCover, FitContain, FitFill, FitInside, FitOutside}
+
+	for _, tt := range tests {
+		for _, fit := range fits {
+			t.Run(tt.name+" "+string(fit), func(t *testing.T) {
+				t.Parallel()
+
+				width, height, err := targetDimensions(tt.size,
+					tt.inputWidth, tt.inputHeight)
+				if err != nil || width != tt.wantWidth || height != tt.wantHeight {
+					t.Fatalf("targetDimensions() = %dx%d, %v, want %dx%d",
+						width, height, err, tt.wantWidth, tt.wantHeight)
+				}
+
+				input := createTestJPEG(t, tt.inputWidth, tt.inputHeight)
+
+				result, err := New(Params{}).Process(t.Context(),
+					bytes.NewReader(input),
+					&Request{Size: tt.size, Format: FormatJPEG, FitMode: fit})
+				if err != nil {
+					t.Fatalf("Process() error = %v", err)
+				}
+
+				defer func() { _ = result.Content.Close() }()
+
+				t.Logf("Process() made %dx%d", result.Width, result.Height)
+
+				ok := result.Width == tt.wantWidth && result.Height == tt.wantHeight
+				if fit == FitOutside {
+					ok = result.Width >= tt.wantWidth && result.Height >= tt.wantHeight
+				}
+
+				if !ok {
+					t.Errorf("Process() made %dx%d, want %dx%d (at least, for %s)",
+						result.Width, result.Height, tt.wantWidth, tt.wantHeight,
+						FitOutside)
+				}
+			})
+		}
+	}
+}

internal/imageprocessor/fit_cover_internal_test.go

@@ -0,0 +1,268 @@
+package imageprocessor
+
+import (
+	"bytes"
+	"image"
+	"image/color"
+	"image/png"
+	"math"
+	"testing"
+)
+
+// TestImageProcessor_FitCoverServesThinSource verifies that FitCover serves
+// a thin source at the requested size. An 8192x1 source scaled to cover
+// 8192x8192 is 8192 times as long as the output on its long side. The centre
+// of an 8192x1 source with the proportions of 1x8192 is 1/8192 of a pixel
+// wide. Each case is also turned on its side.
+func TestImageProcessor_FitCoverServesThinSource(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name                    string
+		inputWidth, inputHeight int
+		size                    Size
+	}{
+		{"8192x1 at 8192x8192", 8192, 1, Size{Width: 8192, Height: 8192}},
+		{"8192x1 at 1x8192", 8192, 1, Size{Width: 1, Height: 8192}},
+		{"1x8192 at 8192x8192", 1, 8192, Size{Width: 8192, Height: 8192}},
+		{"1x8192 at 8192x1", 1, 8192, Size{Width: 8192, Height: 1}},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			input := createTestJPEG(t, tt.inputWidth, tt.inputHeight)
+
+			result, err := New(Params{}).Process(t.Context(),
+				bytes.NewReader(input),
+				&Request{Size: tt.size, Format: FormatJPEG, FitMode: FitCover})
+			if err != nil {
+				t.Fatalf("Process() error = %v", err)
+			}
+
+			defer func() { _ = result.Content.Close() }()
+
+			t.Logf("Process() made %dx%d", result.Width, result.Height)
+
+			if result.Width != tt.size.Width || result.Height != tt.size.Height {
+				t.Errorf("Process() made %dx%d, want %dx%d",
+					result.Width, result.Height, tt.size.Width, tt.size.Height)
+			}
+		})
+	}
+}
+
+// createBandsPNG creates a PNG of three equal bands, red, green and blue,
+// side by side when it is wider than tall and top to bottom otherwise.
+func createBandsPNG(t *testing.T, width, height int) []byte {
+	t.Helper()
+
+	bands := []color.RGBA{
+		{R: 255, A: 255},
+		{G: 255, A: 255},
+		{B: 255, A: 255},
+	}
+
+	img := image.NewRGBA(image.Rect(0, 0, width, height))
+	for y := range height {
+		for x := range width {
+			band := 3 * y / height
+			if width > height {
+				band = 3 * x / width
+			}
+
+			img.Set(x, y, bands[band])
+		}
+	}
+
+	return encodePNG(t, img)
+}
+
+// TestImageProcessor_FitCoverCropsTheCentre verifies that FitCover keeps the
+// centre of the source: a 300x100 source of red, green and blue bands side
+// by side, or a 100x300 one with them top to bottom, comes out at 50x50 as
+// its green band.
+func TestImageProcessor_FitCoverCropsTheCentre(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name                    string
+		inputWidth, inputHeight int
+	}{
+		{"bands side by side", 300, 100},
+		{"bands top to bottom", 100, 300},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			input := createBandsPNG(t, tt.inputWidth, tt.inputHeight)
+
+			result, err := New(Params{}).Process(t.Context(),
+				bytes.NewReader(input),
+				&Request{
+					Size:    Size{Width: 50, Height: 50},
+					Format:  FormatPNG,
+					FitMode: FitCover,
+				})
+			if err != nil {
+				t.Fatalf("Process() error = %v", err)
+			}
+
+			defer func() { _ = result.Content.Close() }()
+
+			output, err := png.Decode(result.Content)
+			if err != nil {
+				t.Fatalf("failed to decode output: %v", err)
+			}
+
+			bounds := output.Bounds()
+			t.Logf("Process() made %dx%d", bounds.Dx(), bounds.Dy())
+
+			if bounds.Dx() != 50 || bounds.Dy() != 50 {
+				t.Fatalf("Process() made %dx%d, want 50x50",
+					bounds.Dx(), bounds.Dy())
+			}
+
+			// Resampling may blend a little of the bands beside the
+			// green one into the output's edges.
+			for y := bounds.Min.Y; y < bounds.Max.Y; y++ {
+				for x := bounds.Min.X; x < bounds.Max.X; x++ {
+					r, g, b, _ := output.At(x, y).RGBA()
+					if r>>8 > 64 || g>>8 < 192 || b>>8 > 64 {
+						t.Fatalf("output pixel %d,%d is %d,%d,%d, want green",
+							x, y, r>>8, g>>8, b>>8)
+					}
+				}
+			}
+		})
+	}
+}
+
+// The greys of createSquarePNG, and the grey halfway between them.
+const (
+	backgroundGrey = 192
+	squareGrey     = 64
+	halfwayGrey    = (backgroundGrey + squareGrey) / 2
+)
+
+// createSquarePNG creates a grey PNG side pixels square with a darker grey
+// square squareSide pixels wide in its centre.
+func createSquarePNG(t *testing.T, side, squareSide int) []byte {
+	t.Helper()
+
+	first := (side - squareSide) / 2
+	last := first + squareSide - 1
+
+	img := image.NewGray(image.Rect(0, 0, side, side))
+	for y := range side {
+		for x := range side {
+			grey := uint8(backgroundGrey)
+			if x >= first && x <= last && y >= first && y <= last {
+				grey = squareGrey
+			}
+
+			img.SetGray(x, y, color.Gray{Y: grey})
+		}
+	}
+
+	return encodePNG(t, img)
+}
+
+// squareLength returns how long the square is along greys, the greys of a
+// row or column of the output that crosses it: the distance between the
+// first and the last point where greys passes halfwayGrey, or 0 when there
+// is no such point. Resampling blurs the square's edges over several
+// pixels, and each point is placed between the two pixels on either side
+// of it in proportion to their greys, so the length is measured to a
+// fraction of a pixel.
+func squareLength(greys []float64) float64 {
+	first, last := -1.0, -1.0
+
+	for i := 1; i < len(greys); i++ {
+		before, after := greys[i-1], greys[i]
+		if (before > halfwayGrey) == (after > halfwayGrey) {
+			continue
+		}
+
+		point := float64(i-1) + (before-halfwayGrey)/(before-after)
+		if first < 0 {
+			first = point
+		}
+
+		last = point
+	}
+
+	return last - first
+}
+
+// TestImageProcessor_FitCoverKeepsProportions verifies that FitCover scales
+// both sides of the source by the same amount: a square in the centre of
+// the source comes out square. Its width and height are measured along the
+// output's middle row and column.
+func TestImageProcessor_FitCoverKeepsProportions(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name             string
+		side, squareSide int
+		size             Size
+	}{
+		{"16x16 at 100x60", 16, 8, Size{Width: 100, Height: 60}},
+		{"16x16 at 60x100", 16, 8, Size{Width: 60, Height: 100}},
+		{"10x10 at 100x35", 10, 2, Size{Width: 100, Height: 35}},
+		{"10x10 at 35x100", 10, 2, Size{Width: 35, Height: 100}},
+		{"64x64 at 300x100", 64, 16, Size{Width: 300, Height: 100}},
+		{"64x64 at 100x300", 64, 16, Size{Width: 100, Height: 300}},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			input := createSquarePNG(t, tt.side, tt.squareSide)
+
+			result, err := New(Params{}).Process(t.Context(),
+				bytes.NewReader(input),
+				&Request{Size: tt.size, Format: FormatPNG, FitMode: FitCover})
+			if err != nil {
+				t.Fatalf("Process() error = %v", err)
+			}
+
+			defer func() { _ = result.Content.Close() }()
+
+			output, err := png.Decode(result.Content)
+			if err != nil {
+				t.Fatalf("failed to decode output: %v", err)
+			}
+
+			bounds := output.Bounds()
+			if bounds.Dx() != tt.size.Width || bounds.Dy() != tt.size.Height {
+				t.Fatalf("Process() made %dx%d, want %dx%d",
+					bounds.Dx(), bounds.Dy(), tt.size.Width, tt.size.Height)
+			}
+
+			row := make([]float64, bounds.Dx())
+			for x := range row {
+				r, _, _, _ := output.At(x, bounds.Dy()/2).RGBA()
+				row[x] = float64(r >> 8)
+			}
+
+			column := make([]float64, bounds.Dy())
+			for y := range column {
+				r, _, _, _ := output.At(bounds.Dx()/2, y).RGBA()
+				column[y] = float64(r >> 8)
+			}
+
+			width, height := squareLength(row), squareLength(column)
+			t.Logf("square is %.2f wide and %.2f high", width, height)
+
+			if width == 0 || math.Abs(width-height) > 0.5 {
+				t.Errorf("square is %.2f wide and %.2f high, want it square",
+					width, height)
+			}
+		})
+	}
+}

internal/imageprocessor/fit_outside_internal_test.go

@@ -60,3 +60,45 @@ func TestImageProcessor_RefusesFitOutsideAboveMaximum(t *testing.T) {
 		})
 	}
 }
+
+// TestImageProcessor_FitOutsideSideIsAtLeastOne verifies that FitOutside
+// keeps each side at 1 or more when it works both sides out again from the
+// larger scale. A side of 49 scaled to 1 is 49 times 1/49, which in floating
+// point is just under 1 and so rounded down to 0, a width libvips refuses.
+func TestImageProcessor_FitOutsideSideIsAtLeastOne(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name                    string
+		inputWidth, inputHeight int
+		size                    Size
+		wantWidth, wantHeight   int
+	}{
+		{"49x8192 at 0x100", 49, 8192, Size{Height: 100}, 1, 167},
+		{"49x49 at 1x1", 49, 49, Size{Width: 1, Height: 1}, 1, 1},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			input := createTestJPEG(t, tt.inputWidth, tt.inputHeight)
+
+			result, err := New(Params{}).Process(t.Context(),
+				bytes.NewReader(input),
+				&Request{Size: tt.size, Format: FormatJPEG, FitMode: FitOutside})
+			if err != nil {
+				t.Fatalf("Process() error = %v", err)
+			}
+
+			defer func() { _ = result.Content.Close() }()
+
+			t.Logf("Process() made %dx%d", result.Width, result.Height)
+
+			if result.Width != tt.wantWidth || result.Height != tt.wantHeight {
+				t.Errorf("Process() made %dx%d, want %dx%d",
+					result.Width, result.Height, tt.wantWidth, tt.wantHeight)
+			}
+		})
+	}
+}

internal/imageprocessor/imageprocessor.go

@@ -311,8 +311,10 @@ func (p *ImageProcessor) Process(
 
 // targetDimensions calculates the output dimensions for a requested size,
 // scaling proportionally when only one dimension is given and keeping the
-// original dimensions when both are zero. A side scaled proportionally can
-// come out above MaxOutputDimension, which is ErrOutputTooLarge.
+// original dimensions when both are zero. A side scaled proportionally is
+// rounded down but kept at 1 or more, as for a thin image it would round
+// down to 0, a side of no pixels. It can come out above MaxOutputDimension,
+// which is ErrOutputTooLarge.
 func targetDimensions(size Size, origWidth, origHeight int) (int, int, error) {
 	width, height := size.Width, size.Height
 
@@ -322,10 +324,10 @@ func targetDimensions(size Size, origWidth, origHeight int) (int, int, error) {
 		return origWidth, origHeight, nil
 	case width == 0:
 		// Only height specified: calculate width proportionally
-		width = origWidth * height / origHeight
+		width = max(1, origWidth*height/origHeight)
 	case height == 0:
 		// Only width specified: calculate height proportionally
-		height = origHeight * width / origWidth
+		height = max(1, origHeight*width/origWidth)
 	}
 
 	if width > MaxOutputDimension || height > MaxOutputDimension {
@@ -475,17 +477,20 @@ func (p *ImageProcessor) resize(
 ) error {
 	switch fit {
 	case FitCover, "":
-		// Resize and crop to fill exact dimensions (default)
-		return img.Thumbnail(width, height, vips.InterestingCentre)
+		// Crop the centre and resize to fill exact dimensions (default)
+		return cropCentreAndResize(img, width, height)
 
 	case FitContain:
-		// Resize to fit within dimensions, maintaining aspect ratio
+		// Resize to fit within dimensions, maintaining aspect ratio. Scaled
+		// by the smaller scale, the short side of a thin image can round
+		// down to 0, which libvips refuses as a width, so each side is at
+		// least 1.
 		imgW, imgH := img.Width(), img.Height()
 		scaleW := float64(width) / float64(imgW)
 		scaleH := float64(height) / float64(imgH)
 		scale := min(scaleW, scaleH)
-		newW := int(float64(imgW) * scale)
-		newH := int(float64(imgH) * scale)
+		newW := max(1, int(float64(imgW)*scale))
+		newH := max(1, int(float64(imgH)*scale))
 
 		return img.Thumbnail(newW, newH, vips.InterestingNone)
 
@@ -503,19 +508,22 @@ func (p *ImageProcessor) resize(
 		scaleW := float64(width) / float64(imgW)
 		scaleH := float64(height) / float64(imgH)
 		scale := min(scaleW, scaleH)
-		newW := int(float64(imgW) * scale)
-		newH := int(float64(imgH) * scale)
+		newW := max(1, int(float64(imgW)*scale))
+		newH := max(1, int(float64(imgH)*scale))
 
 		return img.Thumbnail(newW, newH, vips.InterestingNone)
 
 	case FitOutside:
-		// Resize so smallest dimension fits, may exceed target on other dimension
+		// Resize so smallest dimension fits, may exceed target on other
+		// dimension. A side scaled to 1 can come out just under 1 in
+		// floating point, as 49 times 1/49 does, and round down to 0, which
+		// libvips refuses as a width, so each side is at least 1.
 		imgW, imgH := img.Width(), img.Height()
 		scaleW := float64(width) / float64(imgW)
 		scaleH := float64(height) / float64(imgH)
 		scale := max(scaleW, scaleH)
-		newW := int(float64(imgW) * scale)
-		newH := int(float64(imgH) * scale)
+		newW := max(1, int(float64(imgW)*scale))
+		newH := max(1, int(float64(imgH)*scale))
 
 		// The dimension that exceeds the target is held to the maximum too
 		if newW > MaxOutputDimension || newH > MaxOutputDimension {
@@ -530,6 +538,38 @@ func (p *ImageProcessor) resize(
 	}
 }
 
+// cropCentreAndResize scales img by the same amount on both sides, the
+// least that makes it cover width x height, and cuts the centre width x
+// height out of it, as libvips' thumbnail does with InterestingCentre.
+// thumbnail alone scales the whole image and copies the result into memory
+// before it cuts, and for a thin image that is far larger than the image or
+// the output: 8192x64 at 8192x8192 is 1048576x8192, about 24 GiB. So the
+// centre is cut from img first, widened to whole pixels of img, which adds
+// less than one pixel of img on each side, and thumbnail scales and cuts
+// only that.
+func cropCentreAndResize(img *vips.ImageRef, width, height int) error {
+	imgW, imgH := img.Width(), img.Height()
+
+	// An image wider than the requested proportions keeps its height and
+	// loses width down to imgH*width/height, any other keeps its width and
+	// loses height down to imgW*height/width. Half of what is lost comes
+	// off each side, rounded down to whole pixels, so the part kept holds
+	// all of the centre.
+	left, top := 0, 0
+	if imgW*height > imgH*width {
+		left = (imgW*height - imgH*width) / (2 * height) //nolint:mnd // each side
+	} else {
+		top = (imgH*width - imgW*height) / (2 * width) //nolint:mnd // each side
+	}
+
+	err := img.ExtractArea(left, top, imgW-2*left, imgH-2*top)
+	if err != nil {
+		return err
+	}
+
+	return img.Thumbnail(width, height, vips.InterestingCentre)
+}
+
 const defaultQuality = 85
 
 // encode encodes an image to the specified format. govips gives pixa no way

internal/imgcache/imgcache.go

@@ -5,6 +5,7 @@ import (
 	"context"
 	"errors"
 	"io"
+	"net/url"
 	"time"
 )
 
@@ -86,9 +87,11 @@ func ValidateImageRequest(req *ImageRequest) error {
 type ImageRequest struct {
 	// SourceHost is the origin host (e.g., "cdn.example.com")
 	SourceHost string
-	// SourcePath is the path on the origin (e.g., "/photos/cat.jpg")
+	// SourcePath is the path on the origin with its percent-escapes decoded,
+	// as url.URL's Path holds it (e.g., "/photos/my cat.jpg")
 	SourcePath string
-	// SourceQuery is the optional query string for the origin URL
+	// SourceQuery is the optional query string for the origin URL as the URL
+	// writes it, percent-escapes included, as url.URL's RawQuery holds it
 	SourceQuery string
 	// Size is the requested output dimensions
 	Size Size
@@ -107,20 +110,25 @@ type ImageRequest struct {
 	AllowHTTP bool
 }
 
-// SourceURL returns the full upstream URL to fetch.
-// Uses http:// scheme when AllowHTTP is true, otherwise https://.
+// SourceURL returns the full upstream URL to fetch: the source path
+// percent-encoded again, as net/url writes a path, so each source path is one
+// upstream path, and the source query as it is, with the characters
+// escapeQuery encodes percent-encoded. Uses http:// scheme when AllowHTTP is
+// true, otherwise https://.
 func (r *ImageRequest) SourceURL() string {
 	scheme := "https"
 	if r.AllowHTTP {
 		scheme = "http"
 	}
 
-	url := scheme + "://" + r.SourceHost + r.SourcePath
-	if r.SourceQuery != "" {
-		url += "?" + r.SourceQuery
+	sourceURL := url.URL{
+		Scheme:   scheme,
+		Host:     r.SourceHost,
+		Path:     r.SourcePath,
+		RawQuery: escapeQuery(r.SourceQuery),
 	}
 
-	return url
+	return sourceURL.String()
 }
 
 // ImageResponse represents a processed image ready to serve

internal/imgcache/urlparser.go

@@ -3,6 +3,7 @@ package imgcache
 import (
 	"errors"
 	"fmt"
+	"net/netip"
 	"net/url"
 	"regexp"
 	"strconv"
@@ -28,7 +29,9 @@ var (
 const MaxDimension = imageprocessor.MaxOutputDimension
 
 // ValidateDimension checks one requested width or height; name ("width" or
-// "height") appears in the error. 0 means "original size" and is valid.
+// "height") appears in the error. 0 is valid: that side is then worked out from
+// the source's proportions and the other requested side, rounded down but at
+// least 1, or is the source's own side when the other side is 0 too.
 func ValidateDimension(name string, value int) error {
 	if value < 0 {
 		return fmt.Errorf("%w: %s is negative", ErrInvalidSize, name)
@@ -47,6 +50,24 @@ func ValidateDimension(name string, value int) error {
 var sizeFormatRegex = regexp.MustCompile(
 	`^(\d+)x(\d+)(?:\.(\w+))?$|^(orig)(?:\.(\w+))?$`)
 
+// percentEscapeRegex matches one percent-escape, such as "%2e"
+var percentEscapeRegex = regexp.MustCompile(`%[0-9A-Fa-f]{2}`)
+
+// queryEscapeRegex matches a percent-escape, or one character that a browser
+// percent-encodes in the query of an http or https URL: one outside the
+// printable ASCII characters "!" to "~", such as a space, a control character
+// or a character outside ASCII, or one of `"#'<>`. A "%" that does not begin a
+// percent-escape matches too.
+var queryEscapeRegex = regexp.MustCompile(`%[0-9A-Fa-f]{2}|[^!-~]|["#'<>%]`)
+
+// hostRegex matches the forms the host of an image URL may take: a host name
+// or an IPv4 address (letters, digits, "-", "_" and "."), or an IPv6 address
+// in brackets (hex digits, ":" and "."), either one optionally followed by ":"
+// and a port, which may be empty. Its one group holds the text in brackets,
+// which parseImageComponents also checks is an IPv6 address.
+var hostRegex = regexp.MustCompile(
+	`^(?:[A-Za-z0-9_.-]+|\[([0-9A-Fa-f:.]+)\])(?::[0-9]*)?$`)
+
 // ParsedURL contains the parsed components of an image proxy URL.
 type ParsedURL struct {
 	// Host is the source origin host (e.g., "cdn.example.com")
@@ -61,9 +82,8 @@ type ParsedURL struct {
 	Format ImageFormat
 }
 
-// ParseImagePath parses the path captured by chi's wildcard:
-// <host>/<path>/<size>.<format>, or <host>/<path>/<size> for JPEG XL
-// This is the primary entry point when using chi routing.
+// ParseImagePath parses an image URL's path after /v1/image/, decoded once:
+// <host>/<path>/<size>.<format>, or <host>/<path>/<size> for JPEG XL.
 // Examples:
 //   - cdn.example.com/photos/cat.jpg/800x600.webp
 //   - cdn.example.com/photos/cat.jpg/0x0.jpeg
@@ -79,9 +99,10 @@ func ParseImagePath(path string) (*ParsedURL, error) {
 	return parseImageComponents(path)
 }
 
-// ParseImageURL parses a full URL path like /v1/image/<host>/<path>/<size>.<format>,
-// or /v1/image/<host>/<path>/<size> for JPEG XL
-// Use ParseImagePath instead when working with chi's wildcard capture.
+// ParseImageURL parses an image URL's path, decoded once as r.URL.Path holds
+// it: /v1/image/<host>/<path>/<size>.<format>, or /v1/image/<host>/<path>/<size>
+// for JPEG XL. A source query follows the source path after a "?", which the
+// URL writes as %3F.
 func ParseImageURL(urlPath string) (*ParsedURL, error) {
 	// Remove the /v1/image/ prefix
 	const prefix = "/v1/image/"
@@ -100,12 +121,6 @@ func ParseImageURL(urlPath string) (*ParsedURL, error) {
 // parseImageComponents parses <host>/<path>/<size>.<format>, or
 // <host>/<path>/<size> for JPEG XL.
 func parseImageComponents(remainder string) (*ParsedURL, error) {
-	// Check for path traversal before any other processing
-	err := checkPathTraversal(remainder)
-	if err != nil {
-		return nil, err
-	}
-
 	// Find the last path segment, which holds "size" or "size.format"
 	lastSlash := strings.LastIndex(remainder, "/")
 	if lastSlash == -1 {
@@ -144,10 +159,20 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 		return nil, ErrMissingHost
 	}
 
-	// A URL reads what comes before "@" as a user name and password, and the
-	// rest as the host
-	if strings.Contains(host, "@") {
-		return nil, fmt.Errorf("%w: %q holds @", ErrInvalidHost, host)
+	// Only the forms hostRegex describes are accepted. A "?", "#" or "@" in
+	// the host would make Go's URL parser, which the allowlist check and the
+	// fetcher use, read a different host from the one allowlisted and cached
+	hostMatch := hostRegex.FindStringSubmatch(host)
+	if hostMatch == nil {
+		return nil, fmt.Errorf("%w: %q", ErrInvalidHost, host)
+	}
+
+	// Go's URL parser refuses brackets around anything but an IPv6 address
+	if inBrackets := hostMatch[1]; inBrackets != "" {
+		addr, err := netip.ParseAddr(inBrackets)
+		if err != nil || !addr.Is6() {
+			return nil, fmt.Errorf("%w: %q", ErrInvalidHost, host)
+		}
 	}
 
 	// Host names do not depend on letter case, so the allowlist, the upstream
@@ -155,12 +180,30 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 	// host
 	host = strings.ToLower(host)
 
-	// Extract query string if present in path
+	// Go's URL parser, which the fetcher uses, reads a "#" as the start of a
+	// fragment and drops the rest, so each text after it would be another
+	// spelling, cached under its own keys, of one upstream request
+	if strings.Contains(path, "#") {
+		return nil, fmt.Errorf(
+			`%w: the source path or query holds a "#"`, ErrInvalidPath)
+	}
+
+	// Extract query string if present in path. It is the source URL's query
+	// as that URL writes it. A character a URL's query cannot hold as it is,
+	// such as a space written %20 in the image URL, is percent-encoded here,
+	// so the query is signed and cached as it is sent upstream
 	if qIndex := strings.Index(path, "?"); qIndex != -1 {
-		query = path[qIndex+1:]
+		query = escapeQuery(path[qIndex+1:])
 		path = path[:qIndex]
 	}
 
+	// The source query names no file on the upstream, so only the host and
+	// the source path are checked for path traversal
+	err = checkPathTraversal(host + path)
+	if err != nil {
+		return nil, err
+	}
+
 	// Ensure path starts with /
 	if !strings.HasPrefix(path, "/") {
 		path = "/" + path
@@ -186,12 +229,7 @@ func checkPathTraversal(path string) error {
 	// Decode multiple times to catch double-encoding
 	decoded := path
 	for range 3 {
-		newDecoded, err := url.PathUnescape(decoded)
-		if err != nil {
-			// Malformed encoding is suspicious
-			return ErrPathTraversal
-		}
-
+		newDecoded := decodePercentEscapes(decoded)
 		if newDecoded == decoded {
 			break
 		}
@@ -232,6 +270,32 @@ func checkPathTraversal(path string) error {
 	return nil
 }
 
+// decodePercentEscapes decodes every percent-escape in s, such as %2e, and
+// keeps a "%" that does not start one as it is, where url.PathUnescape would
+// refuse the whole string. A source path holding %25, a literal "%", has such
+// a "%" after one more decoding.
+func decodePercentEscapes(s string) string {
+	return percentEscapeRegex.ReplaceAllStringFunc(s, func(escape string) string {
+		decoded, _ := url.PathUnescape(escape)
+
+		return decoded
+	})
+}
+
+// escapeQuery returns a source query as a URL's query holds it: each
+// character that queryEscapeRegex names, such as a space, percent-encoded,
+// and the rest, the query's percent-escapes included, kept as they are. The
+// result is unchanged by a second escapeQuery.
+func escapeQuery(query string) string {
+	return queryEscapeRegex.ReplaceAllStringFunc(query, func(match string) string {
+		if percentEscapeRegex.MatchString(match) {
+			return match
+		}
+
+		return url.PathEscape(match)
+	})
+}
+
 // parseSizeFormat parses strings like "800x600.webp", "orig.png" or "800x600"
 func parseSizeFormat(s string) (Size, ImageFormat, error) {
 	matches := sizeFormatRegex.FindStringSubmatch(s)

internal/imgcache/urlparser_internal_test.go

@@ -407,6 +407,71 @@ func TestParseImagePath_PathTraversal(t *testing.T) {
 	}
 }
 
+// TestParseImageURL_SourceURLHoldingPercent25 verifies that a source path and
+// a source query holding %25, the percent-escape of a literal "%", are
+// accepted as they are, although decoding them once more leaves a "%" that
+// does not start a percent-escape.
+func TestParseImageURL_SourceURLHoldingPercent25(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name  string
+		input string
+		want  *ParsedURL
+	}{
+		{
+			name:  "path",
+			input: "/v1/image/cdn.example.com/sale/50%25off.jpg/800x600.webp",
+			want: &ParsedURL{
+				Host: testHostCDN, Path: "/sale/50%25off.jpg",
+				Size: Size{Width: 800, Height: 600}, Format: FormatWebP,
+			},
+		},
+		{
+			name:  "query",
+			input: "/v1/image/cdn.example.com/photos/cat.jpg?discount=50%25/800x600.webp",
+			want: &ParsedURL{
+				Host: testHostCDN, Path: testPathCat, Query: "discount=50%25",
+				Size: Size{Width: 800, Height: 600}, Format: FormatWebP,
+			},
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			got, err := ParseImageURL(tt.input)
+			if err != nil {
+				t.Fatalf("ParseImageURL() unexpected error = %v", err)
+			}
+
+			assertParsedURL(t, got, tt.want)
+		})
+	}
+}
+
+// TestParseImageURL_DoubleEncodedTraversalNextToPercent verifies that a
+// double-encoded ".." is still refused when the path also holds a "%" that
+// does not start a percent-escape, either as written or after one more
+// decoding.
+func TestParseImageURL_DoubleEncodedTraversalNextToPercent(t *testing.T) {
+	t.Parallel()
+
+	for _, input := range []string{
+		"/v1/image/cdn.example.com/photos/%252e%252e/secret/50%25off.jpg/800x600.jpeg",
+		"/v1/image/cdn.example.com/photos/%252e%252e/secret/100%/800x600.jpeg",
+	} {
+		_, err := ParseImageURL(input)
+		t.Logf("ParseImageURL(%q) error = %v", input, err)
+
+		if !errors.Is(err, ErrPathTraversal) {
+			t.Errorf("ParseImageURL(%q) error = %v, want ErrPathTraversal",
+				input, err)
+		}
+	}
+}
+
 // errorIs checks if err matches target (handles wrapped errors).
 func errorIs(err, target error) bool {
 	if errors.Is(err, target) {

internal/server/image_proxy_internal_test.go

@@ -14,10 +14,12 @@ import (
 	"net"
 	"net/http"
 	"net/http/httptest"
+	"net/netip"
 	"os"
 	"path/filepath"
 	"sync/atomic"
 	"testing"
+	"time"
 
 	"go.uber.org/fx"
 	"go.uber.org/fx/fxtest"
@@ -183,6 +185,57 @@ func startImageProxy(
 	return s, db.DB(), stateDir
 }
 
+// startImageProxyWithBlockedNetworks starts the components pixad's fx app
+// builds, from a config with a fresh state directory and blockedNetworks as
+// blocked_networks. Unlike startImageProxy it provides no upstream fetcher, so
+// the handlers build the one pixad uses, which checks every address it
+// connects to against the built-in blocked ranges and blocked_networks. It
+// returns the server with its routes.
+func startImageProxyWithBlockedNetworks(
+	t *testing.T, blockedNetworks []netip.Prefix,
+) *Server {
+	t.Helper()
+
+	stateDir := t.TempDir()
+	cfg := &config.Config{
+		SigningKey:      testSigningKey,
+		StateDir:        stateDir,
+		DBURL:           "file:" + filepath.Join(stateDir, "state.sqlite3"),
+		BlockedNetworks: blockedNetworks,
+		// A fetch that gets past the checks and finds nothing at the address
+		// fails within this time at the latest.
+		UpstreamFetchTimeout: 2 * time.Second,
+		// With no connection slots, the fetch would fail before connecting.
+		UpstreamConnections: config.DefaultUpstreamConnections,
+		DownstreamTimeout:   config.DefaultDownstreamTimeout,
+	}
+
+	var (
+		h  *handlers.Handlers
+		mw *middleware.Middleware
+	)
+
+	app := fxtest.New(t,
+		fx.Supply(cfg),
+		fx.Provide(
+			globals.New,
+			logger.New,
+			database.New,
+			healthcheck.New,
+			handlers.New,
+			middleware.New,
+		),
+		fx.Populate(&h, &mw),
+	)
+	app.RequireStart()
+	t.Cleanup(app.RequireStop)
+
+	s := &Server{config: cfg, mw: mw, h: h}
+	s.SetupRoutes()
+
+	return s
+}
+
 // getImage sends a GET for target to s and fails unless it answers 200.
 func getImage(t *testing.T, s *Server, target string) *httptest.ResponseRecorder {
 	t.Helper()

internal/server/source_url_internal_test.go

@@ -0,0 +1,665 @@
+package server
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/netip"
+	"net/url"
+	"regexp"
+	"slices"
+	"strconv"
+	"strings"
+	"sync"
+	"testing"
+	"time"
+
+	"sneak.berlin/go/pixa/internal/encurl"
+	"sneak.berlin/go/pixa/internal/imgcache"
+	"sneak.berlin/go/pixa/internal/session"
+	"sneak.berlin/go/pixa/internal/signature"
+)
+
+// percentSignPath is a source path holding a "%", which a URL writes %25.
+const percentSignPath = "/100%25.png"
+
+// generateFormPattern extracts the CSRF token rendered into the generator
+// page's form.
+var generateFormPattern = regexp.MustCompile(
+	`(?s)action="/generate".*?name="gorilla\.csrf\.Token" value="([^"]+)"`)
+
+// generatedURLPattern extracts the path of the encrypted URL the generator
+// page shows.
+var generatedURLPattern = regexp.MustCompile(`value="[^"]*(/v1/e/[^"]+)"`)
+
+// recordingUpstream is a test upstream that answers every request with a PNG
+// and records the request target, the path and query as sent, of each request
+// it receives.
+type recordingUpstream struct {
+	*httptest.Server
+
+	mu       sync.Mutex
+	received []string
+}
+
+// startRecordingUpstream starts a recordingUpstream, which is closed when the
+// test ends.
+func startRecordingUpstream(t *testing.T) *recordingUpstream {
+	t.Helper()
+
+	source := encodeTestPNG(t, 64, 48)
+	upstream := &recordingUpstream{}
+
+	upstream.Server = httptest.NewServer(http.HandlerFunc(
+		func(w http.ResponseWriter, r *http.Request) {
+			upstream.mu.Lock()
+			upstream.received = append(upstream.received, r.RequestURI)
+			upstream.mu.Unlock()
+
+			w.Header().Set("Content-Type", "image/png")
+			_, _ = w.Write(source)
+		}))
+	t.Cleanup(upstream.Close)
+
+	return upstream
+}
+
+// requestTargets returns the request targets the upstream has received, in
+// the order it received them.
+func (u *recordingUpstream) requestTargets() []string {
+	u.mu.Lock()
+	defer u.mu.Unlock()
+
+	return slices.Clone(u.received)
+}
+
+// pageOrigin is the origin of the login and generator pages below, opened
+// over HTTPS; httptest gives every request the host example.com.
+const pageOrigin = "https://example.com"
+
+// openRoot sends GET / to s over HTTPS, with cookie when it is not nil, and
+// returns the page: the login page, or the generator page for a login session.
+func openRoot(
+	t *testing.T, s *Server, cookie *http.Cookie,
+) *httptest.ResponseRecorder {
+	t.Helper()
+
+	req := httptest.NewRequestWithContext(t.Context(), http.MethodGet,
+		pageOrigin+"/", nil)
+	if cookie != nil {
+		req.AddCookie(cookie)
+	}
+
+	page := httptest.NewRecorder()
+	s.ServeHTTP(page, req)
+
+	return page
+}
+
+// submitForm posts form to path on s as a browser submits it from page over
+// HTTPS: with the CSRF token tokenPattern finds in page, the cookies page set,
+// cookie when it is not nil, and a Referer naming the page, which pixa needs
+// while debug is off, as it is in startImageProxy's config.
+func submitForm(
+	t *testing.T, s *Server, page *httptest.ResponseRecorder,
+	tokenPattern *regexp.Regexp, path string, form url.Values,
+	cookie *http.Cookie,
+) *httptest.ResponseRecorder {
+	t.Helper()
+
+	match := tokenPattern.FindStringSubmatch(page.Body.String())
+	if match == nil {
+		t.Fatalf("the page has no form for %s with a CSRF token", path)
+	}
+
+	form.Set("gorilla.csrf.Token", match[1])
+
+	req := httptest.NewRequestWithContext(t.Context(), http.MethodPost,
+		pageOrigin+path, strings.NewReader(form.Encode()))
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	req.Header.Set("Referer", pageOrigin+"/")
+
+	for _, c := range page.Result().Cookies() {
+		req.AddCookie(c)
+	}
+
+	if cookie != nil {
+		req.AddCookie(cookie)
+	}
+
+	rec := httptest.NewRecorder()
+	s.ServeHTTP(rec, req)
+
+	return rec
+}
+
+// postGenerate logs in to s with the signing key, submits the generator page's
+// form with sourceURL, and returns the response.
+func postGenerate(
+	t *testing.T, s *Server, sourceURL string,
+) *httptest.ResponseRecorder {
+	t.Helper()
+
+	login := submitForm(t, s, openRoot(t, s, nil), csrfFieldPattern, "/",
+		url.Values{"key": {testSigningKey}}, nil)
+
+	var sessionCookie *http.Cookie
+
+	for _, c := range login.Result().Cookies() {
+		if c.Name == session.CookieName {
+			sessionCookie = c
+		}
+	}
+
+	if sessionCookie == nil {
+		t.Fatalf("logging in answered %d and set no session cookie", login.Code)
+	}
+
+	rec := submitForm(t, s, openRoot(t, s, sessionCookie), generateFormPattern,
+		"/generate", url.Values{"url": {sourceURL}}, sessionCookie)
+	t.Logf("POST /generate with url %s: %d", sourceURL, rec.Code)
+
+	return rec
+}
+
+// TestImageURLFetchesItsSourcePathAndQuery requests image URLs whose source
+// query holds a space, written percent-encoded, or a "'", and whose source
+// path holds a "%", written percent-encoded, and checks the one request the
+// upstream receives: the source path percent-encoded again, and the source
+// query with the space written %20 and the "'" written %27, as a browser
+// writes them in a query.
+func TestImageURLFetchesItsSourcePathAndQuery(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name string
+		// pathAndQuery is the source path and query as the image URL writes
+		// them
+		pathAndQuery string
+		// wantRequest is the path and query the upstream must receive
+		wantRequest string
+	}{
+		{"space in the query", "/photo.png%3Fname=my%20cat",
+			"/photo.png?name=my%20cat"},
+		{"apostrophe in the query", "/photo.png%3Fname=it's",
+			"/photo.png?name=it%27s"},
+		{"percent sign in the path", percentSignPath, percentSignPath},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			upstream := startRecordingUpstream(t)
+			s, _, _ := startImageProxy(t, upstream.Server)
+
+			getImage(t, s, "/v1/image/"+upstreamHost+tt.pathAndQuery+"/orig.png")
+
+			got := upstream.requestTargets()
+			t.Logf("upstream received %q", got)
+
+			if !slices.Equal(got, []string{tt.wantRequest}) {
+				t.Errorf("upstream received %q, want [%q]", got, tt.wantRequest)
+			}
+		})
+	}
+}
+
+// TestSourcePathsHoldingSpaceAndPercent20AreFetchedApart requests twice each
+// of the source paths /my cat.png and /my%20cat.png, which the image URL
+// writes my%20cat.png and my%2520cat.png. Each is fetched once, as a request
+// of its own, and its second request is served from the cache.
+func TestSourcePathsHoldingSpaceAndPercent20AreFetchedApart(t *testing.T) {
+	t.Parallel()
+
+	upstream := startRecordingUpstream(t)
+	s, _, _ := startImageProxy(t, upstream.Server)
+
+	imageURLs := []string{
+		"/v1/image/" + upstreamHost + "/my%20cat.png/orig.png",
+		"/v1/image/" + upstreamHost + "/my%2520cat.png/orig.png",
+	}
+
+	for _, imageURL := range imageURLs {
+		getImage(t, s, imageURL)
+	}
+
+	for _, imageURL := range imageURLs {
+		cacheStatus := getImage(t, s, imageURL).Header().Get("X-Pixa-Cache")
+		if cacheStatus != string(imgcache.CacheHit) {
+			t.Errorf("second GET %s: X-Pixa-Cache = %q, want HIT",
+				imageURL, cacheStatus)
+		}
+	}
+
+	got := upstream.requestTargets()
+	t.Logf("upstream received %q", got)
+
+	want := []string{"/my%20cat.png", "/my%2520cat.png"}
+	if !slices.Equal(got, want) {
+		t.Errorf("upstream received %q, want %q", got, want)
+	}
+}
+
+// TestSourceQueryWrittenTwoWaysIsOneUpstreamRequest requests the source query
+// name=my%20cat written as the README says, name=my%2520cat, and with the
+// space written %20, name=my%20cat. Both are one source query: the upstream
+// receives one request, and the second image URL is served from the cache.
+func TestSourceQueryWrittenTwoWaysIsOneUpstreamRequest(t *testing.T) {
+	t.Parallel()
+
+	upstream := startRecordingUpstream(t)
+	s, _, _ := startImageProxy(t, upstream.Server)
+
+	getImage(t, s, "/v1/image/"+upstreamHost+"/photo.png%3Fname=my%2520cat/orig.png")
+
+	second := getImage(t, s,
+		"/v1/image/"+upstreamHost+"/photo.png%3Fname=my%20cat/orig.png")
+	if got := second.Header().Get("X-Pixa-Cache"); got != string(imgcache.CacheHit) {
+		t.Errorf("second X-Pixa-Cache = %q, want HIT", got)
+	}
+
+	got := upstream.requestTargets()
+	t.Logf("upstream received %q", got)
+
+	want := []string{"/photo.png?name=my%20cat"}
+	if !slices.Equal(got, want) {
+		t.Errorf("upstream received %q, want %q", got, want)
+	}
+}
+
+// TestGeneratedURLFetchesTheSourceURLAsEntered makes an encrypted URL on the
+// generator page for source URLs holding %20, %25 and %23 in the path or the
+// query, requests it, and checks that the upstream receives the path and
+// query exactly as entered.
+func TestGeneratedURLFetchesTheSourceURLAsEntered(t *testing.T) {
+	t.Parallel()
+
+	// The names hold no "%": each test's state directory is named after it
+	// and goes into the database URL, which decodes percent-escapes
+	tests := []struct {
+		name         string
+		pathAndQuery string
+	}{
+		{"space in the path", "/my%20cat.png"},
+		{"percent sign in the path", percentSignPath},
+		{"number sign in the path", "/a%23b.png"},
+		{"all three in the query", "/photo.png?name=my%20cat%25%23"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			upstream := startRecordingUpstream(t)
+			s, _, _ := startImageProxy(t, upstream.Server)
+
+			rec := postGenerate(t, s, "https://"+upstreamHost+tt.pathAndQuery)
+
+			match := generatedURLPattern.FindStringSubmatch(rec.Body.String())
+			if rec.Code != http.StatusOK || match == nil {
+				t.Fatalf("POST /generate: %d with no encrypted URL; body %s",
+					rec.Code, rec.Body.String())
+			}
+
+			getImage(t, s, match[1])
+
+			got := upstream.requestTargets()
+			t.Logf("upstream received %q", got)
+
+			if !slices.Equal(got, []string{tt.pathAndQuery}) {
+				t.Errorf("upstream received %q, want [%q]", got, tt.pathAndQuery)
+			}
+		})
+	}
+}
+
+// TestGeneratorMakesOneImageURLForTwoSpellingsOfASourceURL enters two
+// spellings of one source URL on the generator page, requests the encrypted
+// URL made for each, and checks that the upstream receives one request and
+// that the second encrypted URL is served from the cache. One pair writes the
+// host in upper and in lower case, which /v1/image/ lower-cases. The host is
+// an IPv6 address, whose hex digits have letter case, because the fetcher
+// would look a host name up in DNS. It has a port, as the fetcher refuses an
+// IPv6 address written without one. The other pair is a source URL with no
+// path and with the path "/", both of which fetch "/".
+func TestGeneratorMakesOneImageURLForTwoSpellingsOfASourceURL(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name string
+		// sourceURLs are the two spellings, after "https://"
+		sourceURLs []string
+		// wantRequest is the path the upstream must receive
+		wantRequest string
+	}{
+		{"host in upper and in lower case",
+			[]string{"[2001:DB8::A]:8443/a.png", "[2001:db8::a]:8443/a.png"},
+			"/a.png"},
+		{"no path and the path written as a slash",
+			[]string{upstreamHost, upstreamHost + "/"}, "/"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			upstream := startRecordingUpstream(t)
+			s, _, _ := startImageProxy(t, upstream.Server)
+
+			var imageURLs []string
+
+			for _, sourceURL := range tt.sourceURLs {
+				rec := postGenerate(t, s, "https://"+sourceURL)
+
+				match := generatedURLPattern.FindStringSubmatch(rec.Body.String())
+				if rec.Code != http.StatusOK || match == nil {
+					t.Fatalf("POST /generate: %d with no encrypted URL; body %s",
+						rec.Code, rec.Body.String())
+				}
+
+				imageURLs = append(imageURLs, match[1])
+			}
+
+			getImage(t, s, imageURLs[0])
+
+			second := getImage(t, s, imageURLs[1])
+			if got := second.Header().Get("X-Pixa-Cache"); got != string(imgcache.CacheHit) {
+				t.Errorf("second X-Pixa-Cache = %q, want HIT", got)
+			}
+
+			got := upstream.requestTargets()
+			t.Logf("upstream received %q", got)
+
+			if !slices.Equal(got, []string{tt.wantRequest}) {
+				t.Errorf("upstream received %q, want [%q]", got, tt.wantRequest)
+			}
+		})
+	}
+}
+
+// TestGeneratorRefusesSourceURLItCannotFetchAsWritten submits source URLs the
+// generator page must make no encrypted URL for, and checks that it answers
+// 400 and shows why. pixa keeps the source path decoded and fetches it
+// percent-encoded again, so a path holding %2F would be fetched with a "/"
+// there, whatever else the path holds. pixa sends no user name or password,
+// and no "?" with no query after it. For these the page shows the URL pixa
+// would fetch. A source path holding a ".." segment is refused, as
+// /v1/image/ refuses it.
+func TestGeneratorRefusesSourceURLItCannotFetchAsWritten(t *testing.T) {
+	t.Parallel()
+
+	// The test config sets allow_http, so pixa would fetch over plain HTTP
+	const fetchedFrom = "http://" + upstreamHost
+
+	tests := []struct {
+		name string
+		// sourceURL is the source URL after "https://"
+		sourceURL string
+		// wantShown is what the page must show: the URL pixa would fetch, or
+		// why it makes no encrypted URL
+		wantShown string
+	}{
+		{"encoded slash", upstreamHost + "/a%2Fb.png",
+			fetchedFrom + "/a/b.png"},
+		{"encoded slash and a space", upstreamHost + "/a%2Fb c.png",
+			fetchedFrom + "/a/b%20c.png"},
+		{"encoded slash and a bar", upstreamHost + "/a%2Fb|c.png",
+			fetchedFrom + "/a/b%7Cc.png"},
+		{"encoded slash and a letter outside ASCII", upstreamHost + "/café%2Fx.png",
+			fetchedFrom + "/caf%C3%A9/x.png"},
+		{"user name and password", "user:pass@" + upstreamHost + "/a.png",
+			fetchedFrom + "/a.png"},
+		{"question mark with no query", upstreamHost + "/a.png?",
+			fetchedFrom + "/a.png"},
+		{"two-dot segment", upstreamHost + "/a/../b.png",
+			"cannot hold a .. segment"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			s, _, _ := startImageProxy(t, startRecordingUpstream(t).Server)
+
+			rec := postGenerate(t, s, "https://"+tt.sourceURL)
+			body := rec.Body.String()
+
+			if rec.Code != http.StatusBadRequest {
+				t.Errorf("status = %d, want %d", rec.Code, http.StatusBadRequest)
+			}
+
+			if strings.Contains(body, "/v1/e/") {
+				t.Error("the page shows an encrypted URL")
+			}
+
+			if !strings.Contains(body, tt.wantShown) {
+				t.Errorf("the page does not show %s; body %s", tt.wantShown, body)
+			}
+		})
+	}
+}
+
+// ipv6SourcePath is the source path of the image URLs signedImageURL and
+// encryptedImageURL make.
+const ipv6SourcePath = "/ipv6.png"
+
+// TestImageRoutesFetchIPv6SourceHostWithOrWithoutPort requests ipv6SourcePath
+// on an IPv6 source host, written with and without a port, through a
+// /v1/image/ URL with a signature and through an encrypted URL. The public
+// address 2001:db8::a, a documentation address (RFC 3849) the fetcher accepts
+// as public, answers 200, and the upstream receives the request for
+// ipv6SourcePath. The private address fd00::1 answers 403, and the upstream
+// receives no request: the test's fetcher connects every address to the test
+// upstream, so only the fetcher's check of the source URL can refuse it.
+func TestImageRoutesFetchIPv6SourceHostWithOrWithoutPort(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name       string
+		sourceHost string
+		wantStatus int
+		// wantRequests are the request targets the upstream must receive
+		wantRequests []string
+	}{
+		{"public address without a port", "[2001:db8::a]",
+			http.StatusOK, []string{ipv6SourcePath}},
+		{"public address with a port", "[2001:db8::a]:8443",
+			http.StatusOK, []string{ipv6SourcePath}},
+		{"private address without a port", "[fd00::1]",
+			http.StatusForbidden, nil},
+		{"private address with a port", "[fd00::1]:8443",
+			http.StatusForbidden, nil},
+	}
+
+	for _, tt := range tests {
+		imageURLs := map[string]string{
+			"image URL with a signature": signedImageURL(t, tt.sourceHost),
+			"encrypted URL":              encryptedImageURL(t, tt.sourceHost),
+		}
+
+		for route, imageURL := range imageURLs {
+			t.Run(tt.name+" "+route, func(t *testing.T) {
+				t.Parallel()
+
+				upstream := startRecordingUpstream(t)
+				s, _, _ := startImageProxy(t, upstream.Server)
+
+				rec := httptest.NewRecorder()
+				s.ServeHTTP(rec, httptest.NewRequestWithContext(
+					t.Context(), http.MethodGet, imageURL, nil))
+				t.Logf("GET %s: %d", imageURL, rec.Code)
+
+				if rec.Code != tt.wantStatus {
+					t.Errorf("status = %d, want %d; body %s",
+						rec.Code, tt.wantStatus, rec.Body.String())
+				}
+
+				got := upstream.requestTargets()
+				t.Logf("upstream received %q", got)
+
+				if !slices.Equal(got, tt.wantRequests) {
+					t.Errorf("upstream received %q, want %q", got, tt.wantRequests)
+				}
+			})
+		}
+	}
+}
+
+// signedImageURL returns the /v1/image/ URL of ipv6SourcePath on sourceHost at
+// its original size as PNG, with a signature made with the test signing key,
+// which a host not on the allowlist needs. The URL has no q or fit, so it is
+// signed with the quality 85 and the fit cover.
+func signedImageURL(t *testing.T, sourceHost string) string {
+	t.Helper()
+
+	path, sig, exp := signature.New(testSigningKey).GenerateSignedURL(
+		&signature.Request{
+			SourceHost: sourceHost,
+			SourcePath: ipv6SourcePath,
+			Format:     string(imgcache.FormatPNG),
+			Quality:    85,
+			FitMode:    string(imgcache.FitCover),
+		}, time.Hour)
+
+	return path + "?sig=" + sig + "&exp=" + strconv.FormatInt(exp, 10)
+}
+
+// encryptedImageURL returns the encrypted URL of ipv6SourcePath on sourceHost
+// at its original size as PNG, made with the test signing key.
+func encryptedImageURL(t *testing.T, sourceHost string) string {
+	t.Helper()
+
+	generator, err := encurl.NewGenerator(testSigningKey)
+	if err != nil {
+		t.Fatalf("encurl.NewGenerator: %v", err)
+	}
+
+	token, err := generator.Generate(&encurl.Payload{
+		SourceHost: sourceHost, SourcePath: ipv6SourcePath,
+		Format: imgcache.FormatPNG,
+	})
+	if err != nil {
+		t.Fatalf("encurl Generate: %v", err)
+	}
+
+	return "/v1/e/" + token + "/img.png"
+}
+
+// TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address requests
+// ipv6SourcePath on IPv6 source hosts that hold a loopback or private IPv4
+// address in their last four bytes, in the IPv4-compatible form (::/96) or the
+// NAT64 form (64:ff9b::/96), through a /v1/image/ URL with a signature and
+// through an encrypted URL. Each answers 403, and the upstream receives no
+// request: the test's fetcher connects every address to the test upstream, so
+// only the fetcher's check of the source URL can refuse it.
+func TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address(t *testing.T) {
+	t.Parallel()
+
+	upstream := startRecordingUpstream(t)
+	s, _, _ := startImageProxy(t, upstream.Server)
+
+	sourceHosts := []string{
+		"[::127.0.0.1]",     // IPv4-compatible form of a loopback address
+		"[::10.0.0.1]",      // IPv4-compatible form of a private address
+		"[64:ff9b::7f00:1]", // NAT64 form of 127.0.0.1
+	}
+
+	for _, sourceHost := range sourceHosts {
+		imageURLs := []string{
+			signedImageURL(t, sourceHost),
+			encryptedImageURL(t, sourceHost),
+		}
+
+		for _, imageURL := range imageURLs {
+			rec := httptest.NewRecorder()
+			s.ServeHTTP(rec, httptest.NewRequestWithContext(
+				t.Context(), http.MethodGet, imageURL, nil))
+			t.Logf("GET %s (source host %s): %d", imageURL, sourceHost, rec.Code)
+
+			if rec.Code != http.StatusForbidden {
+				t.Errorf("source host %s: status = %d, want %d; body %s",
+					sourceHost, rec.Code, http.StatusForbidden, rec.Body.String())
+			}
+		}
+	}
+
+	if got := upstream.requestTargets(); len(got) != 0 {
+		t.Errorf("upstream received %q, want no request", got)
+	}
+}
+
+// TestImageRoutesCheckIPv4AddressInIPv6SourceHost requests ipv6SourcePath on
+// source hosts that hold an IPv4 address, through a /v1/image/ URL with a
+// signature and through an encrypted URL, with the fetcher pixad uses.
+// [64:ff9b:1::a00:1], in the local-use NAT64 range (64:ff9b:1::/48, RFC 8215),
+// answers 403. [::203.0.113.5] holds the public address 203.0.113.5 in the
+// IPv4-compatible form (::/96) and answers 403 when blocked_networks lists
+// 203.0.113.0/24 or ::/96. [::ffff:203.0.113.5] holds it in the IPv4-mapped
+// form (::ffff:0:0/96) and answers 403 when blocked_networks lists
+// 203.0.113.0/24. Go keeps the plain address 203.0.113.5 in the mapped form
+// too, and an IPv6 range must not refuse it: with ::/0 listed it is not
+// refused. Neither is [::203.0.113.5] with blocked_networks empty. Where a
+// host is not refused, the fetcher tries to connect to it, finds nothing
+// there, and the request fails with another status.
+func TestImageRoutesCheckIPv4AddressInIPv6SourceHost(t *testing.T) {
+	t.Parallel()
+
+	const (
+		ipv4CompatibleHost = "[::203.0.113.5]"
+		ipv4MappedHost     = "[::ffff:203.0.113.5]"
+	)
+
+	tests := []struct {
+		name            string
+		sourceHost      string
+		blockedNetworks []netip.Prefix
+		wantForbidden   bool
+	}{
+		{"local-use NAT64 form of 10.0.0.1", "[64:ff9b:1::a00:1]", nil, true},
+		{"IPv4-compatible form of an address in blocked_networks",
+			ipv4CompatibleHost,
+			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
+		{"IPv4-compatible form with ::/96 in blocked_networks",
+			ipv4CompatibleHost,
+			[]netip.Prefix{netip.MustParsePrefix("::/96")}, true},
+		{"IPv4-mapped form of an address in blocked_networks",
+			ipv4MappedHost,
+			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
+		{"plain IPv4 address with ::/0 in blocked_networks",
+			"203.0.113.5",
+			[]netip.Prefix{netip.MustParsePrefix("::/0")}, false},
+		{"IPv4-compatible form of an address with blocked_networks empty",
+			ipv4CompatibleHost, nil, false},
+	}
+
+	for _, tt := range tests {
+		imageURLs := map[string]string{
+			"image URL with a signature": signedImageURL(t, tt.sourceHost),
+			"encrypted URL":              encryptedImageURL(t, tt.sourceHost),
+		}
+
+		for route, imageURL := range imageURLs {
+			t.Run(tt.name+" "+route, func(t *testing.T) {
+				t.Parallel()
+
+				s := startImageProxyWithBlockedNetworks(t, tt.blockedNetworks)
+
+				rec := httptest.NewRecorder()
+				s.ServeHTTP(rec, httptest.NewRequestWithContext(
+					t.Context(), http.MethodGet, imageURL, nil))
+				t.Logf("GET %s: %d", imageURL, rec.Code)
+
+				forbidden := rec.Code == http.StatusForbidden
+				if tt.wantForbidden && !forbidden {
+					t.Errorf("status = %d, want %d; body %s",
+						rec.Code, http.StatusForbidden, rec.Body.String())
+				}
+
+				if !tt.wantForbidden && forbidden {
+					t.Errorf("status = %d, want any other status; body %s",
+						rec.Code, rec.Body.String())
+				}
+			})
+		}
+	}
+}

internal/signature/signature.go

@@ -126,31 +126,20 @@ func (s *Signer) GenerateSignedURL(
 		sizeStr = fmt.Sprintf("%dx%d", req.Width, req.Height)
 	}
 
-	// Build the path.
-	// When a source query is present, it is embedded as a path segment
-	// (e.g. /host/path?query/size.fmt) so that the URL parser can extract
-	// it from the last-slash split. The "?" inside a path segment is
-	// percent-encoded by clients but chi delivers it decoded, which is
-	// exactly what the URL parser expects.
-	var path string
+	// Build the path. A source query follows the source path after a "?".
+	// The image route reads the path decoded once, so the whole path is
+	// written in Go's own percent-encoding of a URL path, which writes "?"
+	// as %3F and "%" as %25, and leaves "/", ";", ",", "=" and "&" as they
+	// are.
+	sourcePathAndQuery := req.SourcePath
 	if req.SourceQuery != "" {
-		path = fmt.Sprintf("/v1/image/%s%s%%3F%s/%s.%s",
-			req.SourceHost,
-			req.SourcePath,
-			url.PathEscape(req.SourceQuery),
-			sizeStr,
-			req.Format,
-		)
-	} else {
-		path = fmt.Sprintf("/v1/image/%s%s/%s.%s",
-			req.SourceHost,
-			req.SourcePath,
-			sizeStr,
-			req.Format,
-		)
+		sourcePathAndQuery += "?" + req.SourceQuery
 	}
 
-	return path, sig, exp
+	unescapedPath := fmt.Sprintf("/v1/image/%s%s/%s.%s",
+		req.SourceHost, sourcePathAndQuery, sizeStr, req.Format)
+
+	return (&url.URL{Path: unescapedPath}).EscapedPath(), sig, exp
 }
 
 // buildSignatureData creates the string to be signed.

internal/signature/signature_test.go

@@ -475,6 +475,44 @@ func TestGenerateSignedURL_WithoutQueryString(t *testing.T) {
 	}
 }
 
+// TestGenerateSignedURL_ReadmeQueryExample checks the README's example of a
+// source URL with a query, the image at
+// https://cdn.example.com/img?url=https://origin.example.com/my%20cat.jpg: its
+// signature with the README's key, and the path GenerateSignedURL writes for
+// it, with the "?" written as %3F and the "%" as %25.
+func TestGenerateSignedURL_ReadmeQueryExample(t *testing.T) {
+	t.Parallel()
+
+	signer := signature.New("example-signing-key-for-documentation")
+
+	req := signature.Request{
+		SourceHost:  testHost,
+		SourcePath:  "/img",
+		SourceQuery: "url=https://origin.example.com/my%20cat.jpg",
+		Width:       800,
+		Height:      600,
+		Format:      testFormatWebP,
+		Quality:     85,
+		FitMode:     testFitCover,
+		Expires:     time.Unix(1704067200, 0),
+	}
+
+	const wantSig = "37aFa9GSVCZM1kRY9SzMOk2fOg_M7Wt5gKNR4xM-FYA="
+
+	gotSig := signer.Sign(&req)
+	if gotSig != wantSig {
+		t.Errorf("Sign() = %q, want %q", gotSig, wantSig)
+	}
+
+	const wantPath = "/v1/image/cdn.example.com" +
+		"/img%3Furl=https://origin.example.com/my%2520cat.jpg/800x600.webp"
+
+	gotPath, _, _ := signer.GenerateSignedURL(&req, time.Hour)
+	if gotPath != wantPath {
+		t.Errorf("GenerateSignedURL() path = %q, want %q", gotPath, wantPath)
+	}
+}
+
 func TestParseParams(t *testing.T) {
 	t.Parallel()