With TRUSTED_PROXIES empty behind the reverse proxy production is
required to run behind, every login POST keyed on the proxy's address
and shared one 5/minute bucket. A stranger sending five POSTs a
minute -- 0.08 requests per second, from anywhere -- kept that bucket
permanently full, and the operator's own correct password was answered
429 indefinitely with no second administrative path.
The login POST no longer has a pre-emptive limiter. The handler
verifies credentials first and spends budget only on a FAILED attempt,
so a correct password is never throttled whatever the counters hold.
Three things follow, and are implemented together because the first is
unsafe without the other two:
- Failures are counted per (client bucket, submitted username), five
per minute, after which further failures get 429 with a Retry-After.
A successful login clears the counter, so mistyping and then
succeeding does not leave the operator throttled.
- Both key sets are capped at 1024 entries. The submitted username is
attacker-controlled, so past the first cap failures fall back to a
counter keyed on the client alone, and past both caps a failure is
answered as throttled without being recorded. Tracked state stays
under half a megabyte and does not grow with invented usernames.
- Concurrent Argon2id verifications are capped at two, a 128 MB
ceiling at 64 MB per hash, and the queue for those slots is capped
at 16 waiters. Every password-hashing endpoint takes a slot,
including the password-change endpoint, which holds one across both
its hashes. A request that waits five seconds without a slot is
answered 503, and one that arrives with the queue already full is
shed with 503 immediately rather than joining it. Bounding the wait
alone would not bound memory, and the queue depth is sized from what
a parked waiter measurably retains rather than from the 1 MB body
cap, which bounds only the raw body read. The body-cap, CSRF and
form-parsing middleware all run before the guard, so a waiter holds
its parsed form plus its request header block for the whole wait.
Measured on the pinned go1.26.1 toolchain as the HeapAlloc delta
across two GCs with 64 waiters parked in the handler: an ordinary
two-field login form retains ~0 MB, a 1 MB urlencoded body at Go's
10,000-parameter parse cap retains 2.82 MB (3.09 MB with %41
escapes), and the ~0.9 MB of headers the 1 MB header cap allows
takes it to 4.18 MB. The retained parse and the header block
dominate, not the raw body. So 16 waiters: 16 x 4.18 MB is about
67 MB of committed queue memory, and two slots drain a full 16-deep
queue in about 0.6 s, far inside the deadline. Peak commitment for
the endpoint is about 203 MB — 128 MB of Argon2id plus the 18
requests holding a parsed form, 16 queued and the 2 being hashed, at
about 75 MB.
An unknown username is verified against a dummy hash instead of
returning early, so a nonexistent account costs the same time as a
real one and the response cannot be used to enumerate usernames.
The password-change limiter is unchanged: RequireAuth runs ahead of
it, so only a request already carrying a valid session reaches its
bucket.
Two consequences are documented rather than fixed, because they follow
from the shape the issue asks for. Online guessing throughput rises
from 5 a minute to roughly 27 a second, about 2.3 million a day: the
credential check always precedes the counter, so the 429 is a label on
the response rather than a gate in front of the hash, and what bounds
brute force is the semaphore. And under a sustained flood the residual
exposure is a loss of login availability, not merely of latency --
above about 27 requests a second most attempts are shed with 503, so a
determined flood still denies login for as long as it runs. It costs
roughly 400x more to run, nothing accumulates, and the first attempt
after it stops succeeds. Restarting the service does not help: the
counters a restart clears are not what is saturated.
Also adds the missing test for the third bucketKey call site, where
the peer is a trusted proxy but the forwarded chain names no client.
Every existing test of that fallback uses an IPv4 proxy, where
bucketKey is the identity function, so dropping the /64 masking there
left the suite green.
README and the TRUSTED_PROXIES startup warning updated: a shared
bucket now costs precision, not the availability of the admin path.
check / check (push) Superseded by a newer commit; never tested
Per-webhook archive writers are now evicted when the webhook or its last
database target is deleted, and a background sweeper prunes expired rows from
idle archives that no longer receive writes. Archive files themselves are never
deleted.
Implements the `databaseTarget` as a real archiving target, replacing the always-successful stub. Delivering to a `database` target now writes the full event into a per-webhook archive SQLite file for long-term storage.
## Archive-writer semantics
- **Separate file:** each webhook's full events are written as rows into `archive-{webhookID}.db` under the data dir, distinct from the per-webhook event DB (`events-{webhookID}.db`). The file and its schema are created on first write if missing. Each row carries the full event: body, headers, method, content type, webhook id, entrypoint id, event id, and an archived-at timestamp.
- **Close/reopen with debounce:** after each write the archive handle is closed and reopened, unless the last (re)open was less than one second ago. This lets an operator move the archive file away for offline archiving while bounding file churn under load. A per-webhook `archiveWriter` owns this debounce state and serialises writes.
- **Auto-recreate:** the file is opened create-if-missing (`mode=rwc`) and its schema re-migrated on every open, so if the archive was moved or removed since the last open, the next write recreates it. The writer also detects a missing file before writing and reopens first, so a moved-away file is recreated rather than lost.
- **Optional expiry, validated at creation:** an optional `expiry` in the target's config JSON (e.g. `{"expiry":"720h"}`) is validated when the target is created (`ValidateArchiveExpiry`; bad values are rejected with a 400 at the add-target form, the Slack URL precedent). The default (missing, empty, or `"never"`) keeps rows forever with no pruning. When a positive duration is set, rows older than it (measured from each row's archived-at time) are pruned on every (re)open; because the file is reopened after writes, prune-on-open keeps the archive swept without a separate background sweeper. A set-but-invalid expiry in a stored config (unparseable, zero, or negative) is an error at delivery time too — never a silent default.
- **No-retry, fail-loud:** the target performs a single attempt with no retries. On success it records one successful attempt and marks the delivery delivered. If the archive write fails, the attempt is recorded as failed with the error and the delivery is marked failed — archiving errors never report success.
## Scope
- `internal/delivery/target_database.go` — the `databaseTarget` (no-retry) archives via a per-webhook writer registry; an archive error records a failed attempt and marks the delivery failed.
- `internal/delivery/target_database_archive.go` (new) — the `archiveWriter`, the archived-row model, config/expiry parsing (fail-loud on set-but-invalid values), `ValidateArchiveExpiry`, and prune-on-open.
- `internal/handlers/source_management.go` — database targets get a creation-validated `expiry` config (`buildDatabaseTargetConfig`); the expiry form value is read where the request body is bounded and bad values are rejected with a 400 at target creation.
- `templates/source_detail.html` — the add-target form shows an expiry field for database targets.
- `README.md` — the database-target documentation describes the archiving semantics.
- `internal/delivery/export_test.go`, `internal/delivery/target_database_test.go`, `internal/handlers` tests — tests and their exported shims.
No changes to the `Target` interface or other targets.
## Tests
- a row is archived (both at the writer level and end-to-end through `Deliver`)
- a forced archive failure (bad stored expiry config) yields a `Failed` delivery with a non-success `DeliveryResult` carrying the error and no archive file created
- the file is recreated after removal, with only the post-removal row
- the one-second reopen debounce (rapid writes reopen once; a write after the window reopens again)
- expiry pruning removes rows older than the configured expiry
- expiry config parsing (empty / `never` / duration accepted; unparseable, zero, and negative values error)
- expiry validation at target creation (`TestValidateArchiveExpiry`; valid values build the config, bad values get a 400)
## Validation
`docker build .` exits 0 (fmt-check, lint, test, build all pass).
Closes#43
Co-authored-by: sneak <sneak@sneak.berlin>
Reviewed-on: #84
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Slack delivery targets were only checked by the request-time dialer guard, not at creation, giving them a weaker SSRF gate than HTTP targets.
This validates the Slack incoming-webhook URL with `delivery.ValidateTargetURL` in the Slack target creation path (`buildSlackTargetConfig`), before persisting, mirroring the existing HTTP-target path. On failure the create is rejected with the same clear, non-leaking user-facing error the HTTP path uses.
Adds handlers-package tests covering both an accepted public URL and a rejected private/reserved URL. Confined to `internal/handlers/`; `internal/delivery/` is unchanged.
Closes#68
Co-authored-by: sneak <sneak@sneak.berlin>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #73
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Closes [issue #50](#50)
## Summary
Refactors the Dockerfile to use a separate lint stage with a pinned golangci-lint Docker image, following the pattern used by [sneak/pixa](https://git.eeqj.de/sneak/pixa). This replaces the previous approach of installing golangci-lint via curl in the builder stage.
## Changes
### Dockerfile
- **New `lint` stage** using `golangci/golangci-lint:v2.11.3` (Debian-based, pinned by sha256 digest) as a separate build stage
- **Builder stage** depends on lint via `COPY --from=lint /src/go.sum /dev/null` — build won't proceed unless linting passes
- **Go bumped** from 1.24 to 1.26.1 (`golang:1.26.1-bookworm`, pinned by sha256)
- **golangci-lint bumped** from v1.64.8 to v2.11.3
- All three Docker images (golangci-lint, golang, alpine) pinned by sha256 digest
- Debian-based golangci-lint image used (not Alpine) because mattn/go-sqlite3 CGO does not compile on musl (off64_t)
### Linter Config (.golangci.yml)
- Migrated from v1 to v2 format (`version: "2"` added)
- Removed linters no longer available in v2: `gofmt` (handled by `make fmt-check`), `gosimple` (merged into `staticcheck`), `typecheck` (always-on in v2)
- Same set of linters enabled — no rules weakened
### Code Fixes (all lint issues from v2 upgrade)
- Added package comments to all packages
- Added doc comments to all exported types, functions, and methods
- Fixed unchecked errors flagged by `errcheck` (sqlDB.Close, os.Setenv in tests, resp.Body.Close, fmt.Fprint)
- Fixed unused parameters flagged by `revive` (renamed to `_`)
- Fixed `gosec` G120 warnings: added `http.MaxBytesReader` before `r.ParseForm()` calls
- Fixed `staticcheck` QF1012: replaced `WriteString(fmt.Sprintf(...))` with `fmt.Fprintf`
- Fixed `staticcheck` QF1003: converted if/else chain to tagged switch
- Renamed `DeliveryTask` → `Task` to avoid package stutter (`delivery.Task` instead of `delivery.DeliveryTask`)
- Renamed shadowed builtin `max` parameter to `upperBound` in `cryptoRandInt`
- Used `t.Setenv` instead of `os.Setenv` in tests (auto-restores)
### README.md
- Updated version requirements: Go 1.26+, golangci-lint v2.11+
- Updated Dockerfile description in project structure
## Verification
`docker build .` passes cleanly — formatting check, linting, all tests, and build all succeed.
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #55
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Closes#51
The root path `/` now checks for an authenticated session and redirects accordingly:
- **Authenticated users** → `303 See Other` redirect to `/sources` (the webhook dashboard)
- **Unauthenticated users** → `303 See Other` redirect to `/pages/login`
### Changes
- **`internal/handlers/index.go`** — Replaced the template-rendering `HandleIndex()` with a session-checking redirect handler. Removed `formatUptime` helper (dead code after this change).
- **`internal/handlers/handlers.go`** — Removed `index.html` from the template map (no longer rendered).
- **`internal/handlers/handlers_test.go`** — Replaced the old "handler is not nil" test with two proper redirect tests:
- `unauthenticated redirects to login` — verifies 303 to `/pages/login`
- `authenticated redirects to sources` — sets up an authenticated session cookie, verifies 303 to `/sources`
- Removed `TestFormatUptime` (tested dead code).
- **`README.md`** — Updated the API endpoints table to describe the new redirect behavior.
### How it works
The handler calls `session.Get(r)` and `session.IsAuthenticated(sess)` — the same pattern used by the `RequireAuth` middleware and `HandleLoginPage`. No new dependencies or session logic introduced.
The login flow is unaffected: `HandleLoginSubmit` redirects to `/` after successful login, which now forwards to `/sources` (one extra redirect hop, but correct and clean).
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: clawbot <clawbot@eeqj.de>
Reviewed-on: #52
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
DBURL → DATA_DIR consolidation:
- Remove DBURL env var entirely; main DB now lives at {DATA_DIR}/webhooker.db
- database.go constructs DB path from config.DataDir, ensures dir exists
- Update DATA_DIR prod default from /data/events to /data
- Update all tests to use DataDir instead of DBURL
- Update Dockerfile: /data (not /data/events) for all SQLite databases
- Update README configuration table, Docker examples, architecture docs
Dead code removal:
- Remove unused IndexResponse struct (handlers/index.go)
- Remove unused TemplateData struct (handlers/handlers.go)
Stale comment cleanup:
- Remove TODO in server.go (DB cleanup handled by fx lifecycle)
- Fix nolint:golint → nolint:revive on ServerParams for consistency
- Clean up verbose middleware/routing comments in routes.go
- Fix TODO fan-out description (worker pool, not goroutine-per-target)
.gitignore fixes:
- Add data/ directory to gitignore
- Remove stale config.yaml entry (env-only config since rework)
The webhook handler now builds DeliveryTask structs carrying all target
config and event data inline (for bodies ≤16KB) and sends them through
the delivery channel. In the happy path, the engine delivers without
reading from any database — it only writes to record delivery results.
For large bodies (≥16KB), Body is nil and the engine fetches it from the
per-webhook database on demand. Retry timers also carry the full
DeliveryTask, so retries avoid unnecessary DB reads.
The database is used for crash recovery only: on startup the engine scans
for interrupted pending/retrying deliveries and re-queues them.
Implements owner feedback from issue #15:
> the message in the <=16KB case should have everything it needs to do
> its delivery. it shouldn't touch the db until it has a success or
> failure to record.
Remove SESSION_KEY env var requirement. On first startup, a
cryptographically secure 32-byte key is generated and stored in a new
settings table. Subsequent startups load the key from the database.
- Add Setting model (key-value table) for application config
- Add Database.GetOrCreateSessionKey() method
- Session manager initializes in OnStart after database is connected
- Remove DevSessionKey constant and SESSION_KEY env var handling
- Remove prod validation requiring SESSION_KEY
- Update README: config table, Docker instructions, security notes
- Update config.yaml.example
- Update all tests to remove SessionKey references
Addresses owner feedback on issue #15.
Replace the polling-based delivery engine with a fully event-driven
architecture using Go channels and goroutines:
- Webhook handler notifies engine via buffered channel after creating
delivery records, with inline event data for payloads < 16KB
- Large payloads (>= 16KB) use pointer semantics (Body *string = nil)
and are fetched from DB on demand, keeping channel memory bounded
- Failed retry-target deliveries schedule Go timers with exponential
backoff; timers fire into a separate retry channel when ready
- On startup, engine scans DB once to recover interrupted deliveries
(pending processed immediately, retrying get timers for remaining
backoff)
- DB stores delivery status for crash recovery only, not for
inter-component communication during normal operation
- delivery.Notifier interface decouples handlers from engine; fx wires
*Engine as Notifier
No more periodic polling. No more wasted cycles when idle.
Split data storage into main application DB (config only) and
per-webhook event databases (one SQLite file per webhook).
Architecture changes:
- New WebhookDBManager component manages per-webhook DB lifecycle
(create, open, cache, delete) with lazy connection pooling via sync.Map
- Main DB (DBURL) stores only config: Users, Webhooks, Entrypoints,
Targets, APIKeys
- Per-webhook DBs (DATA_DIR) store Events, Deliveries, DeliveryResults
in files named events-{webhook_uuid}.db
- New DATA_DIR env var (default: ./data dev, /data/events prod)
Behavioral changes:
- Webhook creation creates per-webhook DB file
- Webhook deletion hard-deletes per-webhook DB file (config soft-deleted)
- Event ingestion writes to per-webhook DB, not main DB
- Delivery engine polls all per-webhook DBs for pending deliveries
- Database target type marks delivery as immediately successful (events
are already in the dedicated per-webhook DB)
- Event log UI reads from per-webhook DBs with targets from main DB
- Existing webhooks without DB files get them created lazily
Removed:
- ArchivedEvent model (was a half-measure, replaced by per-webhook DBs)
- Event/Delivery/DeliveryResult removed from main DB migrations
Added:
- Comprehensive tests for WebhookDBManager (create, delete, lazy
creation, delivery workflow, multiple webhooks, close all)
- Dockerfile creates /data/events directory
README updates:
- Per-webhook event databases documented as implemented (was Phase 2)
- DATA_DIR added to configuration table
- Docker instructions updated with data volume mount
- Data model diagram updated
- TODO updated (database separation moved to completed)
Closes#15
Templates are now embedded using //go:embed and parsed once at startup
with template.Must(template.ParseFS(...)). This avoids re-parsing
template files from disk on every request and removes the dependency
on template files being present at runtime.
closes #7
## Summary
This PR brings the webhooker repo into full REPO_POLICIES compliance, addressing both [issue #1](#1) and [issue #2](#2).
## Changes
### New files
- **`cmd/webhooker/main.go`** — The missing application entry point. Uses Uber fx to wire together all internal packages (config, database, logger, server, handlers, middleware, healthcheck, globals, session). Minimal glue code.
- **`REPO_POLICIES.md`** — Fetched from authoritative source (`sneak/prompts`)
- **`.editorconfig`** — Fetched from authoritative source
- **`.dockerignore`** — Sensible Go project exclusions
- **`.gitea/workflows/check.yml`** — CI workflow that runs `docker build .` on push to any branch (Gitea Actions format, actions/checkout pinned by sha256)
- **`configs/config.yaml.example`** — Moved from root `config.yaml`
### Modified files
- **`Makefile`** — Complete rewrite with all REPO_POLICIES required targets: `test`, `lint`, `fmt`, `fmt-check`, `check`, `build`, `hooks`, `docker`, `clean`, plus `dev`, `run`, `deps`
- **`Dockerfile`** — Complete rewrite:
- Builder: `golang:1.24` (Debian-based, pinned by `sha256:d2d2bc1c84f7...`). Debian needed because `gorm.io/driver/sqlite` pulls `mattn/go-sqlite3` (CGO) which fails on Alpine musl.
- golangci-lint v1.64.8 installed from GitHub release archive with sha256 verification (v1.x because `.golangci.yml` uses v1 config format)
- Runs `make check` (fmt-check + lint + test + build) as build step
- Final stage: `alpine:3.21` (pinned by `sha256:c3f8e73fdb79...`) with non-root user, healthcheck, port 8080
- **`README.md`** — Rewritten with all required REPO_POLICIES sections: description line with name/purpose/category/license/author, Getting Started, Rationale, Design, TODO (integrated from TODO.md), License, Author
- **`.gitignore`** — Fixed `webhooker` pattern to `/webhooker` (was blocking `cmd/webhooker/`), added `config.yaml` to prevent committing runtime config with secrets
- **`static/static.go`** — Removed `vendor` from embed directive (directory was empty/missing)
- **`internal/database/database_test.go`** — Fixed to use in-memory config via `afero.MemMapFs` instead of depending on `config.yaml` on disk. Test is now properly isolated.
- **`go.mod`/`go.sum`** — `go mod tidy`
### Removed files
- **`TODO.md`** — Content integrated into README.md TODO section
- **`config.yaml`** — Moved to `configs/config.yaml.example`
## Verification
- `docker build .` passes (lint ✅, test ✅, build ✅)
- All existing tests pass with no modifications to assertions or test logic
- `.golangci.yml` untouched
closes #1
closes #2
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #6
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
