Make config set create a list for an index under a missing key (closes #308)

`config set age_recipients.0 age1...` on a file without `age_recipients`
created a map keyed `0` and wrote it, after which every command failed
to parse the config. A missing key is now created as a list when the
next path element is a number, and an index that list cannot take is an
error.

`config set` now decodes its result into the config type before
writing, and on failure refuses and leaves the file unchanged. It does
not validate: settings are set one at a time, and validation would
refuse a config still being filled in.

Judgement call: a `${...}` reference set on a setting that is not text
is now refused, since it decodes as text; `config edit` can still write
one.
Rule suppressed: gosec G304 where the new test reads back its own temp
file, as the other config tests do.

Model: opus-5-5

README.md

@@ -271,8 +271,14 @@ existing file. Created with mode `0600` since it will contain credentials.
 **`config set`**: Set a scalar config value by dotted YAML path
 (e.g. `vaultik config set compression_level 9`,
 `vaultik config set storage_url "file:///mnt/backups"`). Comments and
-formatting in the file are preserved; intermediate maps are created as
-needed.
+formatting in the file are preserved. Missing keys along the path are
+created: as a list when the next path element is a number (so
+`vaultik config set age_recipients.0 age1...` works on a file without
+`age_recipients`), otherwise as a map. A change that gives a setting the
+wrong type, such as a single value where a list belongs or a word where
+a number belongs, is refused and the file is left unchanged. Whether the
+config is complete and its values are in range is checked when a command
+loads it, not by `config set`, so settings can be set one at a time.
 
 **`snapshot create`**: Perform incremental backup of configured snapshots.
 * Optional snapshot names argument to create specific snapshots (default: all)
@@ -286,7 +292,9 @@ needed.
   remove orphaned blobs from remote storage. By default keeps only the latest
   snapshot per name; use `--keep-newer-than` for a rolling window.
 * `--keep-newer-than <duration>`: With `--prune`, keep snapshots newer than
-  this duration instead of only the latest (e.g. `4w`, `30d`, `6mo`, `1y`)
+  this duration instead of only the latest (e.g. `4w`, `30d`, `6mo`, `1y`).
+  Without `--prune`, or with a value that is not a valid duration, the
+  command fails before the backup starts.
 
 **`snapshot list`**: Show every snapshot known to this host — the union
 of the local index and the backup destination store — with timestamps
@@ -431,7 +439,10 @@ object store. Credentials are read from `s3.access_key_id` and
 `s3.secret_access_key` in the config file.
 
 **Local filesystem** (`file:///path/to/backup`): Stores blobs and metadata on
-a local or mounted filesystem. Useful for testing or backing up to a NAS.
+a local or mounted filesystem. Useful for testing or backing up to a NAS. The
+path must be absolute; a relative one is refused when the config loads.
+Percent-escapes in the path are decoded, so `my%20stick` and `my stick` name
+the same directory.
 
 **Rclone** (`rclone://remote/path`): Uses rclone's 70+ supported cloud
 providers. Requires rclone to be configured separately (`rclone config`).

TODO.md

@@ -22,17 +22,6 @@ the tag exists and is exercised; what is left is merging `next` to
 
 # Completed Steps
 
-- 2026-10-13: Made a `file://` destination list through a symlinked
-  directory ([issue #296](https://git.eeqj.de/sneak/vaultik/issues/296)).
-  A `metadata/` or `blobs/` directory that was a symlink to a directory
-  elsewhere was listed as one file, so the destination store listed as
-  empty while backups and restores still worked through the link.
-  `prune` then removed the local snapshot records and deleted every blob,
-  and `remote info` and `remote nuke` found no blobs. The listings now
-  read through the link as `Get` and `Stat` do. A link whose target is
-  missing, such as one to a volume that is not mounted, or a link
-  pointing back up the tree makes them fail.
-
 - 2026-10-13: Stopped `remote info` counting a file under `blobs/` that
   is not a blob as an orphaned blob
   ([issue #295](https://git.eeqj.de/sneak/vaultik/issues/295)). A stray

internal/blob/packer.go

@@ -245,6 +245,17 @@ func (p *Packer) Flush(ctx context.Context) error {
 	return nil
 }
 
+// DiscardCurrentBlob closes and removes the temp file of the blob being
+// packed, if any, and drops that blob. A caller that stops before Flush
+// must call it, or the temp file is left behind. Thread-safe.
+func (p *Packer) DiscardCurrentBlob() {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+
+	p.cleanupTempFile()
+	p.currentBlob = nil
+}
+
 // FinalizeBlob finalizes the current blob being assembled.
 // This compresses the accumulated chunks, encrypts the result, and computes
 // the content-addressed hash. The finalized blob is either passed to the

internal/cli/config.go

@@ -44,6 +44,8 @@ var (
 	errNeedNumericIndex = errors.New("key is a list; use a numeric index")
 	errIndexOutOfRange  = errors.New("index out of range")
 	errNotMapOrList     = errors.New("key is not a map or list")
+	errWouldNotLoad     = errors.New(
+		"the config would no longer load, so the file was not changed")
 )
 
 const defaultConfigTemplate = `# vaultik configuration
@@ -251,6 +253,12 @@ func NewConfigCommand() *cobra.Command {
 		Use:   "config",
 		Short: "Manage the configuration file",
 		Long:  "Commands for creating, editing, and querying the vaultik config file.",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	cmd.AddCommand(newConfigInitCommand())
@@ -385,8 +393,11 @@ func newConfigSetCommand() *cobra.Command {
 		Use:   "set <key> <value>",
 		Short: "Set a config value by dotted path (e.g. compression_level 5)",
 		Long: `Sets a scalar config value addressed by dotted YAML path and writes
-the file back, preserving comments and formatting. Intermediate maps
-are created as needed.
+the file back, preserving comments and formatting. Missing keys along
+the path are created: as a list when the next path element is a
+number, otherwise as a map. A change that gives a setting the wrong
+type, such as a single value where a list belongs, is refused and the
+file is left unchanged.
 
 Examples:
   vaultik config set storage_url "file:///mnt/backups"
@@ -426,6 +437,14 @@ func writeConfigSet(out *ui.Writer, path, key, value string) error {
 		return fmt.Errorf("marshaling config: %w", err)
 	}
 
+	// Refuse a result that config.Load could not decode. Load also
+	// validates the config; that is left out here because settings are set
+	// one at a time, so a config being filled in is incomplete in between.
+	err = yaml.Unmarshal(data, &config.Config{})
+	if err != nil {
+		return fmt.Errorf("%w: %w", errWouldNotLoad, err)
+	}
+
 	err = os.WriteFile(path, data, configFileMode)
 	if err != nil {
 		return fmt.Errorf("writing config file: %w", err)
@@ -553,8 +572,8 @@ func yamlPathGet(root *yaml.Node, keys []string) (*yaml.Node, error) {
 	return node, nil
 }
 
-// yamlPathSet navigates a dotted key path, creating intermediate maps as
-// needed, and sets the final key to the given scalar value. Numeric path
+// yamlPathSet navigates a dotted key path, creating missing keys as needed,
+// and sets the final key to the given scalar value. Numeric path
 // components index into sequences; an index equal to the sequence length
 // appends a new element (e.g. "age_recipients.1" on a 1-element list).
 func yamlPathSet(root *yaml.Node, keys []string, value string) error {
@@ -567,12 +586,12 @@ func yamlPathSet(root *yaml.Node, keys []string, value string) error {
 		node = node.Content[0]
 	}
 
-	for i, key := range keys {
+	for i := range keys {
 		last := i == len(keys)-1
 
 		switch node.Kind {
 		case yaml.MappingNode:
-			node = yamlSetInMapping(node, key, value, last)
+			node = yamlSetInMapping(node, keys, i, value, last)
 		case yaml.SequenceNode:
 			next, err := yamlSetInSequence(node, keys, i, value, last)
 			if err != nil {
@@ -641,14 +660,16 @@ func yamlField(typ reflect.Type, key string) (reflect.StructField, bool) {
 	return reflect.StructField{}, false
 }
 
-// yamlSetInMapping resolves (creating if needed) the value node for key
-// within a mapping node, setting it to value when it is the final path
-// element, and returns the node to descend into.
-func yamlSetInMapping(node *yaml.Node, key, value string, last bool) *yaml.Node {
+// yamlSetInMapping resolves (creating if needed) the value node for the
+// path element keys[i] within a mapping node, setting it to value when it
+// is the final path element, and returns the node to descend into.
+func yamlSetInMapping(
+	node *yaml.Node, keys []string, i int, value string, last bool,
+) *yaml.Node {
 	var valueNode *yaml.Node
 
 	for j := 0; j+1 < len(node.Content); j += 2 {
-		if node.Content[j].Value == key {
+		if node.Content[j].Value == keys[i] {
 			valueNode = node.Content[j+1]
 
 			break
@@ -656,13 +677,8 @@ func yamlSetInMapping(node *yaml.Node, key, value string, last bool) *yaml.Node
 	}
 
 	if valueNode == nil {
-		keyNode := &yaml.Node{Kind: yaml.ScalarNode, Value: key}
-
-		valueNode = &yaml.Node{Kind: yaml.MappingNode}
-		if last {
-			valueNode = &yaml.Node{Kind: yaml.ScalarNode, Value: value}
-		}
-
+		keyNode := &yaml.Node{Kind: yaml.ScalarNode, Value: keys[i]}
+		valueNode = newPathNode(keys, i, value)
 		node.Content = append(node.Content, keyNode, valueNode)
 	} else if last {
 		setScalar(valueNode, value)
@@ -690,12 +706,7 @@ func yamlSetInSequence(
 	}
 
 	if idx == len(node.Content) {
-		newNode := &yaml.Node{Kind: yaml.MappingNode}
-		if last {
-			newNode = &yaml.Node{Kind: yaml.ScalarNode, Value: value}
-		}
-
-		node.Content = append(node.Content, newNode)
+		node.Content = append(node.Content, newPathNode(keys, i, value))
 	} else if last {
 		setScalar(node.Content[idx], value)
 	}
@@ -703,6 +714,22 @@ func yamlSetInSequence(
 	return node.Content[idx], nil
 }
 
+// newPathNode returns the node to create for the missing path element
+// keys[i]: the value when it is the final path element, otherwise an empty
+// list when the next path element is a number and an empty map when not.
+func newPathNode(keys []string, i int, value string) *yaml.Node {
+	if i == len(keys)-1 {
+		return &yaml.Node{Kind: yaml.ScalarNode, Value: value}
+	}
+
+	_, err := strconv.Atoi(keys[i+1])
+	if err == nil {
+		return &yaml.Node{Kind: yaml.SequenceNode}
+	}
+
+	return &yaml.Node{Kind: yaml.MappingNode}
+}
+
 // setScalar overwrites a node in place with a plain scalar value.
 func setScalar(n *yaml.Node, value string) {
 	n.Kind = yaml.ScalarNode

internal/cli/config_test.go

@@ -58,14 +58,15 @@ func TestDefaultConfigTemplateParses(t *testing.T) {
 	}
 }
 
+// testRecipient is a valid age public key.
+const testRecipient = "age1278m9q7dp3chsh2dcy82qk27v047zywyvtxwnj4cvt0z65jw6a7q5dqhfj"
+
 // TestConfigSetRecipientOnFreshConfig follows the README quickstart: on the
 // file `config init` writes, `config set age_recipients.0` and
 // `config set storage_url` give a config that loads with that recipient.
 func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 	t.Parallel()
 
-	const recipient = "age1278m9q7dp3chsh2dcy82qk27v047zywyvtxwnj4cvt0z65jw6a7q5dqhfj"
-
 	path := filepath.Join(t.TempDir(), "config.yml")
 
 	err := os.WriteFile(path, []byte(defaultConfigTemplate), configFileMode)
@@ -75,7 +76,7 @@ func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 
 	out := ui.NewWithColor(&bytes.Buffer{}, false)
 
-	err = writeConfigSet(out, path, "age_recipients.0", recipient)
+	err = writeConfigSet(out, path, "age_recipients.0", testRecipient)
 	if err != nil {
 		t.Fatalf("config set age_recipients.0: %v", err)
 	}
@@ -90,8 +91,111 @@ func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 		t.Fatalf("config.Load: %v", err)
 	}
 
-	if len(cfg.AgeRecipients) != 1 || cfg.AgeRecipients[0] != recipient {
-		t.Errorf("age_recipients = %v, want [%s]", cfg.AgeRecipients, recipient)
+	if len(cfg.AgeRecipients) != 1 || cfg.AgeRecipients[0] != testRecipient {
+		t.Errorf("age_recipients = %v, want [%s]", cfg.AgeRecipients, testRecipient)
+	}
+}
+
+// configWithoutRecipients loads, but has no age_recipients key and no
+// snapshot named work.
+const configWithoutRecipients = `storage_url: file:///mnt/backups
+snapshots:
+  home:
+    paths:
+      - "~"
+`
+
+// TestConfigSetIndexUnderMissingKey checks that a list index under a key
+// the file does not have creates a list, and that the result loads.
+func TestConfigSetIndexUnderMissingKey(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		key   string
+		value string
+		field func(cfg *config.Config) []string
+	}{
+		{"age_recipients.0", testRecipient,
+			func(cfg *config.Config) []string { return cfg.AgeRecipients }},
+		{"snapshots.work.paths.0", "/srv/work",
+			func(cfg *config.Config) []string { return cfg.Snapshots["work"].Paths }},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.key, func(t *testing.T) {
+			t.Parallel()
+
+			path := filepath.Join(t.TempDir(), "config.yml")
+
+			err := os.WriteFile(path, []byte(configWithoutRecipients), configFileMode)
+			if err != nil {
+				t.Fatalf("write config: %v", err)
+			}
+
+			err = writeConfigSet(ui.NewWithColor(&bytes.Buffer{}, false),
+				path, tt.key, tt.value)
+			if err != nil {
+				t.Fatalf("config set %s: %v", tt.key, err)
+			}
+
+			cfg, err := config.Load(path)
+			if err != nil {
+				t.Fatalf("config.Load: %v", err)
+			}
+
+			got := tt.field(cfg)
+			if len(got) != 1 || got[0] != tt.value {
+				t.Errorf("%s gives %v, want [%s]", tt.key, got, tt.value)
+			}
+		})
+	}
+}
+
+// TestConfigSetKeepsFileThatWouldNotLoad checks that config set refuses a
+// change after which the config would not load, and leaves the file as it
+// was.
+func TestConfigSetKeepsFileThatWouldNotLoad(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		key   string
+		value string
+	}{
+		// Index 1 of the empty list the missing key gives.
+		{"age_recipients.1", testRecipient},
+		// A list set to a single value.
+		{"snapshots.home.paths", "/srv"},
+		{"compression_level", "fast"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.key, func(t *testing.T) {
+			t.Parallel()
+
+			path := filepath.Join(t.TempDir(), "config.yml")
+
+			err := os.WriteFile(path, []byte(configWithoutRecipients), configFileMode)
+			if err != nil {
+				t.Fatalf("write config: %v", err)
+			}
+
+			err = writeConfigSet(ui.NewWithColor(&bytes.Buffer{}, false),
+				path, tt.key, tt.value)
+			if err == nil {
+				t.Errorf("config set %s %s succeeded, want an error",
+					tt.key, tt.value)
+			}
+
+			data, err := os.ReadFile(path) //nolint:gosec // G304: test-controlled path
+			if err != nil {
+				t.Fatalf("read config: %v", err)
+			}
+
+			if string(data) != configWithoutRecipients {
+				t.Errorf("config set %s changed the file to:\n%s",
+					tt.key, data)
+			}
+		})
 	}
 }
 

internal/cli/database.go

@@ -15,6 +15,12 @@ func NewDatabaseCommand() *cobra.Command {
 		Use:   "database",
 		Short: "Manage the local state database",
 		Long:  `Commands for managing the local SQLite state database.`,
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	cmd.AddCommand(

internal/cli/entry_snapshot_create_prune_test.go

@@ -0,0 +1,108 @@
+package cli //nolint:testpackage // shares runEntry and the hermetic config helpers
+
+import (
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+)
+
+// Flags of `snapshot create` used to build argument vectors below.
+const (
+	flagPrune         = "--prune"
+	flagKeepNewerThan = "--keep-newer-than"
+)
+
+// TestEntrySnapshotCreateRejectsKeepNewerThanBeforeBackup checks that a
+// --keep-newer-than the post-backup prune could not use stops `snapshot
+// create` before the backup: the command fails and the destination
+// store stays empty. It used to be read only by the prune, after the
+// snapshot was uploaded, and without --prune it was ignored.
+//
+//nolint:paralleltest // replaces os.Args, os.Stdout, os.Stderr and the xdg globals
+func TestEntrySnapshotCreateRejectsKeepNewerThanBeforeBackup(t *testing.T) {
+	for _, testCase := range []struct {
+		name string
+		args []string
+	}{
+		{
+			name: "decimal in a day count",
+			args: []string{flagPrune, flagKeepNewerThan, "1.5d"},
+		},
+		{
+			name: "unknown unit",
+			args: []string{flagPrune, flagKeepNewerThan, "4x"},
+		},
+		{
+			name: "without --prune",
+			args: []string{flagKeepNewerThan, "4w"},
+		},
+	} {
+		t.Run(testCase.name, func(t *testing.T) {
+			configPath, storeDir := writeBackupConfig(t)
+
+			code, _, _ := runEntry(t, append(
+				[]string{flagConfig, configPath, cmdSnapshot, cmdCreate},
+				testCase.args...)...)
+
+			assert.Equal(t, 1, code)
+
+			stored, err := os.ReadDir(storeDir)
+			require.NoError(t, err)
+			assert.Empty(t, stored, "nothing may be uploaded")
+		})
+	}
+}
+
+// TestEntrySnapshotCreateReportsPostBackupPruneFailure makes the
+// post-backup prune fail after a good backup, by planting a manifest
+// that cannot be decoded, and checks that the failure is reported as the
+// prune's and not as a failed snapshot creation.
+//
+//nolint:paralleltest // replaces os.Args, os.Stdout, os.Stderr and the xdg globals
+func TestEntrySnapshotCreateReportsPostBackupPruneFailure(t *testing.T) {
+	configPath, storeDir := writeBackupConfig(t)
+
+	// A remote key is 64 lowercase hex characters. The prune reads every
+	// manifest on the store and fails on one it cannot decode.
+	plantedDir := filepath.Join(storeDir, "metadata", strings.Repeat("a", 64))
+	require.NoError(t, os.MkdirAll(plantedDir, 0o750))
+	require.NoError(t, os.WriteFile(
+		filepath.Join(plantedDir, "manifest.json.zst"),
+		[]byte("not a valid manifest"), 0o600))
+
+	code, _, stderr := runEntry(t,
+		flagConfig, configPath, cmdSnapshot, cmdCreate, flagPrune)
+
+	assert.Equal(t, 1, code)
+	assert.Contains(t, stderr, "Backup completed, but post-backup prune failed")
+	assert.NotContains(t, stderr, "Snapshot creation failed")
+
+	snapshots, err := os.ReadDir(filepath.Join(storeDir, "metadata"))
+	require.NoError(t, err)
+	assert.Len(t, snapshots, 2,
+		"the new snapshot is on the store beside the planted one")
+}
+
+// writeBackupConfig builds a hermetic config with one small file in its
+// source directory and an empty destination store directory. Returns the
+// config path and the store directory.
+func writeBackupConfig(t *testing.T) (string, string) {
+	t.Helper()
+
+	configPath := writeHermeticPruneConfig(t, false)
+
+	// writeHermeticPruneConfig puts the source and store directories
+	// beside the config file.
+	dir := filepath.Dir(configPath)
+	sourceDir := filepath.Join(dir, "source")
+
+	require.NoError(t, os.Mkdir(sourceDir, 0o750))
+	require.NoError(t, os.WriteFile(
+		filepath.Join(sourceDir, "file.txt"), []byte("hello"), 0o600))
+
+	return configPath, filepath.Join(dir, "store")
+}

internal/cli/entry_unknown_subcommand_test.go

@@ -0,0 +1,43 @@
+package cli //nolint:testpackage // shares runEntry and the command-word constants
+
+import (
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+)
+
+// TestEntryGroupRejectsUnknownSubcommand runs each group command with a
+// mistyped subcommand, as a crontab line might carry one. It must fail
+// with exit 1 and name the word, as `vaultik bogus` does at the top
+// level, instead of printing the group's help and exiting 0 having done
+// nothing. The group name alone still prints its help.
+//
+//nolint:paralleltest // replaces os.Args, os.Stdout and os.Stderr
+func TestEntryGroupRejectsUnknownSubcommand(t *testing.T) {
+	for _, testCase := range []struct {
+		group    string
+		mistyped string
+	}{
+		{group: cmdSnapshot, mistyped: "craete"},
+		{group: "config", mistyped: "inti"},
+		{group: cmdRemote, mistyped: "ifno"},
+		{group: "database", mistyped: "delte"},
+		{group: "completion", mistyped: "nosuchshell"},
+	} {
+		t.Run(testCase.group, func(t *testing.T) {
+			code, stdout, stderr := runEntry(t,
+				testCase.group, testCase.mistyped)
+
+			assert.Equal(t, 1, code)
+			assert.Empty(t, stdout)
+			assert.Contains(t, stderr,
+				`unknown command "`+testCase.mistyped+`"`)
+
+			code, stdout, _ = runEntry(t, testCase.group)
+
+			assert.Equal(t, 0, code)
+			assert.Contains(t, stdout,
+				programName+" "+testCase.group+" [command]")
+		})
+	}
+}

internal/cli/remote.go

@@ -18,6 +18,12 @@ func NewRemoteCommand() *cobra.Command {
 		Use:   "remote",
 		Short: "Remote storage management commands",
 		Long:  "Commands for inspecting and managing remote storage",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	// Add subcommands

internal/cli/root.go

@@ -74,6 +74,21 @@ on the source system.`,
 		NewDatabaseCommand(),
 	)
 
+	// cobra adds the completion command only when Execute runs, and with
+	// no Run, so it skipped its own cobra.NoArgs and a mistyped shell name
+	// printed help and exited 0. Adding it here lets it have a Run. Its
+	// scripts go to os.Stdout as it is now: a later SetOut does not
+	// redirect them.
+	cmd.InitDefaultCompletionCmd()
+
+	for _, sub := range cmd.Commands() {
+		if sub.Name() == "completion" {
+			sub.Run = func(completion *cobra.Command, _ []string) {
+				_ = completion.Help()
+			}
+		}
+	}
+
 	return cmd
 }
 

internal/cli/snapshot.go

@@ -41,6 +41,12 @@ func NewSnapshotCommand() *cobra.Command {
 		Use:   "snapshot",
 		Short: "Snapshot management commands",
 		Long:  "Commands for creating, listing, and managing snapshots",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	// Add subcommands
@@ -71,6 +77,11 @@ otherwise from the platform config directory (~/.config/vaultik/config.yml
 on Linux), then /etc/vaultik/config.yml.`,
 		Args: cobra.ArbitraryArgs,
 		RunE: func(cmd *cobra.Command, args []string) error {
+			err := opts.Validate()
+			if err != nil {
+				return err
+			}
+
 			// Pass snapshot names from args
 			opts.Snapshots = args
 			// --skip-errors is a global flag on the root command.
@@ -97,6 +108,13 @@ on Linux), then /etc/vaultik/config.yml.`,
 			}, func(v *vaultik.Vaultik) error {
 				return v.CreateSnapshot(opts)
 			}, func(err error) {
+				if errors.Is(err, vaultik.ErrPostBackupPruneFailed) {
+					log.Error("Post-backup prune failed", "error", err)
+					ReportErrorf("Backup completed, but %v", err)
+
+					return
+				}
+
 				log.Error("Snapshot creation failed", "error", err)
 				ReportErrorf("Snapshot creation failed: %v", err)
 			})

internal/config/config.go

@@ -61,6 +61,9 @@ var (
 	errBadS3PartSize    = errors.New("s3.part_size must be between 5MiB and 5GiB")
 	errBadStorageScheme = errors.New(
 		"storage_url must start with s3://, file://, or rclone://")
+	errFileURLNotAbsolute = errors.New(
+		"a file:// storage_url needs an absolute path, " +
+			"as in file:///path/to/backup")
 	errStorageNotConfigured = errors.New(
 		"storage not configured; set storage_url or provide s3.endpoint + " +
 			"s3.bucket + credentials")
@@ -461,11 +464,18 @@ func (c *Config) validateStorage() error {
 
 // validateStorageURL validates URL-based storage configuration. File and
 // rclone URLs need no credentials; S3 URLs require the legacy s3.*
-// credential fields.
+// credential fields. A file URL must name an absolute path: a relative one
+// would resolve against the working directory, so the destination would
+// move with it.
 func (c *Config) validateStorageURL() error {
 	switch {
 	case strings.HasPrefix(c.StorageURL, "file://"):
-		// File storage doesn't need S3 credentials
+		// storage.ParseStorageURL applies the same rule, but config
+		// cannot import storage, which imports config.
+		if !strings.HasPrefix(c.StorageURL, "file:///") {
+			return errFileURLNotAbsolute
+		}
+
 		return nil
 	case strings.HasPrefix(c.StorageURL, "rclone://"):
 		// Rclone storage uses rclone's own config

internal/config/config_test.go

@@ -337,6 +337,35 @@ func TestLoadS3PartSize(t *testing.T) {
 	})
 }
 
+// TestLoadRejectsRelativeFileURL checks that a file:// storage_url with a
+// relative path fails at load. Accepted, it would resolve against the
+// working directory, so a backup run from another directory would write
+// to a different destination and still succeed.
+func TestLoadRejectsRelativeFileURL(t *testing.T) {
+	t.Parallel()
+
+	const relativeConfig = "snapshots:\n" +
+		"  test:\n" +
+		"    paths: [/tmp/vaultik-test-source]\n" +
+		"storage_url: file://dest\n"
+
+	path := filepath.Join(t.TempDir(), "config.yml")
+
+	err := os.WriteFile(path, []byte(relativeConfig), 0o600)
+	if err != nil {
+		t.Fatalf("write config: %v", err)
+	}
+
+	_, err = Load(path)
+	if !errors.Is(err, errFileURLNotAbsolute) {
+		t.Fatalf("Load() error = %v, want errFileURLNotAbsolute", err)
+	}
+
+	if !strings.Contains(err.Error(), "absolute path") {
+		t.Errorf("error %q does not say to use an absolute path", err.Error())
+	}
+}
+
 // TestValidateAgeRecipients checks that recipients are parsed at config load
 // (a bad entry fails immediately, not mid-backup) and that no invalid entry —
 // least of all a pasted secret key — is echoed in the error. An empty list

internal/snapshot/exclude_test.go

@@ -531,3 +531,50 @@ func TestExcludePatterns_UnanchoredPatternFile(t *testing.T) {
 	require.Equal(t, 1, result.FilesScanned,
 		"Unanchored pattern for file should match anywhere")
 }
+
+func TestExcludePatterns_DoubleStarDirectoryAtEveryDepth(t *testing.T) {
+	t.Parallel()
+
+	// As in gitignore, a leading **/ also matches directly under the source dir
+	fs := setupAnchoredTestFS(t)
+
+	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/projectname"})
+	defer cleanup()
+
+	ctx := context.Background()
+	createSnapshotRecord(ctx, t, repos, "test-snapshot")
+
+	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
+	require.NoError(t, err)
+
+	// **/projectname should exclude BOTH:
+	// - /backup/projectname/file.txt
+	// - /backup/otherproject/projectname/file.txt
+	// Total files: 4, excluded: 2
+	require.Equal(t, 2, result.FilesScanned,
+		"**/ directory pattern should match at the top level and nested")
+}
+
+func TestExcludePatterns_DoubleStarFileAtEveryDepth(t *testing.T) {
+	t.Parallel()
+
+	// As in gitignore, a leading **/ also matches directly under the source dir
+	fs := setupAnchoredTestFS(t)
+
+	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/*.txt"})
+	defer cleanup()
+
+	ctx := context.Background()
+	createSnapshotRecord(ctx, t, repos, "test-snapshot")
+
+	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
+	require.NoError(t, err)
+
+	// **/*.txt should exclude ALL .txt files:
+	// - /backup/file.txt
+	// - /backup/projectname/file.txt
+	// - /backup/otherproject/projectname/file.txt
+	// Total files: 4, excluded: 3
+	require.Equal(t, 1, result.FilesScanned,
+		"**/ file pattern should match at the top level and nested")
+}

internal/snapshot/scanner.go

@@ -1295,6 +1295,11 @@ func (s *Scanner) batchAddFilesToSnapshot(
 func (s *Scanner) processPhase(
 	ctx context.Context, filesToProcess []*FileToProcess, result *ScanResult,
 ) error {
+	// On an error or cancellation the blob being packed is never
+	// finalized, so its temp file must be removed here. After a
+	// successful flush there is no such blob and this does nothing.
+	defer s.packer.DiscardCurrentBlob()
+
 	// Calculate total bytes to process
 	var totalBytes int64
 	for _, f := range filesToProcess {
@@ -2013,6 +2018,14 @@ func compileExcludePatterns(patterns []string) []compiledPattern {
 		// Remove trailing slash if present (directory indicator)
 		pattern = strings.TrimSuffix(pattern, "/")
 
+		// A leading "**/" demands a "/" before the name and so misses an
+		// entry directly under the source path. An unanchored pattern
+		// already matches at every depth, so drop the prefix: as in
+		// gitignore, "**/x" then also matches a top-level "x".
+		if !anchored {
+			pattern = strings.TrimPrefix(pattern, "**/")
+		}
+
 		// Compile the glob pattern
 		// For patterns without path separators, we need to match them as components
 		// e.g., ".git" should match ".git" anywhere in the path

internal/snapshot/skip_errors_test.go

@@ -381,3 +381,60 @@ func TestScannerCancelStopsSkipErrorsRun(t *testing.T) {
 		})
 	}
 }
+
+// TestScannerRemovesBlobTempFileWhenRunStops checks that a run stopped
+// part-way, by a file it cannot read or by a cancellation, removes the
+// temp file of the blob it was packing.
+func TestScannerRemovesBlobTempFileWhenRunStops(t *testing.T) {
+	t.Parallel()
+
+	// a.txt is backed up first and starts a blob; the run stops at b.txt.
+	const target = "/source/b.txt"
+
+	tests := []struct {
+		name  string
+		newFs func(cancel context.CancelFunc) afero.Fs
+	}{
+		{
+			name: "file cannot be read",
+			newFs: func(context.CancelFunc) afero.Fs {
+				return &readFailFs{Fs: afero.NewMemMapFs(), target: target}
+			},
+		},
+		{
+			name: "cancelled",
+			newFs: func(cancel context.CancelFunc) afero.Fs {
+				return &cancelOnOpenFs{
+					Fs: afero.NewMemMapFs(), target: target, cancel: cancel,
+				}
+			},
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			ctx, cancel := context.WithCancel(context.Background())
+			defer cancel()
+
+			fs := tt.newFs(cancel)
+			writeSkipErrorTestFile(t, fs, "/source/a.txt", "first file content")
+			writeSkipErrorTestFile(t, fs, target, "second file content")
+
+			_, err := runSkipErrorScan(ctx, t, fs, "/source", false, nil)
+			if err == nil {
+				t.Fatal("expected the scan to stop with an error, got nil")
+			}
+
+			left, err := afero.Glob(fs, filepath.Join(os.TempDir(), "vaultik-blob-*"))
+			if err != nil {
+				t.Fatalf("listing blob temp files: %v", err)
+			}
+
+			if len(left) != 0 {
+				t.Fatalf("expected no blob temp file left, got %v", left)
+			}
+		})
+	}
+}

internal/storage/file.go

@@ -120,10 +120,9 @@ func (f *FileStorer) Delete(_ context.Context, key string) error {
 	return nil
 }
 
-// List returns all keys with the given prefix, reading through symlinked
-// directories. It fails when the destination directory is missing or the
-// prefix is a symlink whose target is missing; a missing prefix under the
-// destination directory is an empty listing.
+// List returns all keys with the given prefix. It fails when the
+// destination directory is missing; a missing prefix under it is an
+// empty listing.
 func (f *FileStorer) List(ctx context.Context, prefix string) ([]string, error) {
 	var keys []string
 
@@ -134,7 +133,8 @@ func (f *FileStorer) List(ctx context.Context, prefix string) ([]string, error)
 
 	basePath := f.fullPath(prefix)
 
-	exists, err := f.prefixExists(basePath)
+	// Check if the prefix exists
+	exists, err := afero.Exists(f.fs, basePath)
 	if err != nil {
 		return nil, fmt.Errorf("checking path: %w", err)
 	}
@@ -143,7 +143,7 @@ func (f *FileStorer) List(ctx context.Context, prefix string) ([]string, error)
 		return keys, nil // Empty list for non-existent prefix
 	}
 
-	err = f.walk(basePath, func(path string, info os.FileInfo, err error) error {
+	err = afero.Walk(f.fs, basePath, func(path string, info os.FileInfo, err error) error {
 		if err != nil {
 			return err
 		}
@@ -176,9 +176,7 @@ func (f *FileStorer) List(ctx context.Context, prefix string) ([]string, error)
 }
 
 // ListStream returns a channel of ObjectInfo for large result sets. Like
-// List, it reads through symlinked directories and sends an error when
-// the destination directory is missing or the prefix is a symlink whose
-// target is missing.
+// List, it sends an error when the destination directory is missing.
 func (f *FileStorer) ListStream(ctx context.Context, prefix string) <-chan ObjectInfo {
 	ch := make(chan ObjectInfo)
 
@@ -194,7 +192,8 @@ func (f *FileStorer) ListStream(ctx context.Context, prefix string) <-chan Objec
 
 		basePath := f.fullPath(prefix)
 
-		exists, err := f.prefixExists(basePath)
+		// Check if the prefix exists
+		exists, err := afero.Exists(f.fs, basePath)
 		if err != nil {
 			ch <- ObjectInfo{Err: fmt.Errorf("checking path: %w", err)}
 
@@ -205,7 +204,7 @@ func (f *FileStorer) ListStream(ctx context.Context, prefix string) <-chan Objec
 			return // Empty channel for non-existent prefix
 		}
 
-		_ = f.walk(basePath, func(path string, info os.FileInfo, err error) error {
+		_ = afero.Walk(f.fs, basePath, func(path string, info os.FileInfo, err error) error {
 			// Check context cancellation
 			select {
 			case <-ctx.Done():
@@ -353,40 +352,6 @@ func (f *FileStorer) writeAtomic(
 	return nil
 }
 
-// walk is afero.Walk, except that it reads through a symlinked directory
-// the way Get and Stat do, where afero.Walk reports the link as one file.
-// afero.Walk uses Lstat, which does not follow a link, whenever the
-// filesystem has one; the struct below carries only the afero.Fs methods,
-// so the walk uses Stat instead. A link back up the tree is followed until
-// the operating system refuses the path for too many levels of links, and
-// the walk then fails.
-func (f *FileStorer) walk(root string, fn filepath.WalkFunc) error {
-	return afero.Walk(struct{ afero.Fs }{f.fs}, root, fn)
-}
-
-// prefixExists is afero.Exists, except that it does not follow a symlink
-// at path. A symlinked prefix whose target is missing, such as a link to
-// a volume that is not mounted, therefore exists, and walk then fails on
-// it; with afero.Exists it would list as empty, and prune would delete
-// every blob.
-func (f *FileStorer) prefixExists(path string) (bool, error) {
-	lstater, ok := f.fs.(afero.Lstater)
-	if !ok {
-		return afero.Exists(f.fs, path)
-	}
-
-	_, _, err := lstater.LstatIfPossible(path)
-	if err == nil {
-		return true, nil
-	}
-
-	if os.IsNotExist(err) {
-		return false, nil
-	}
-
-	return false, err
-}
-
 // fullPath returns the full filesystem path for a key.
 func (f *FileStorer) fullPath(key string) string {
 	return filepath.Join(f.basePath, key)

internal/storage/file_backend_test.go

@@ -4,10 +4,7 @@ import (
 	"context"
 	"errors"
 	"io/fs"
-	"os"
 	"path/filepath"
-	"reflect"
-	"strings"
 	"testing"
 
 	"sneak.berlin/go/vaultik/internal/storage"
@@ -63,151 +60,3 @@ func TestFileStorerListMissingDestination(t *testing.T) {
 		t.Errorf("ListStream error = %v, want a not-exist error", streamErr)
 	}
 }
-
-// TestFileStorerListsThroughSymlinkedDirectory checks that List and
-// ListStream read through a symlinked metadata/ or blobs/ directory, as Get
-// and Stat do, instead of listing the link as one key. Listing the whole
-// destination meets the link part-way through the walk; listing its prefix
-// starts the walk at the link.
-func TestFileStorerListsThroughSymlinkedDirectory(t *testing.T) {
-	t.Parallel()
-
-	for _, dir := range []string{"metadata", "blobs"} {
-		t.Run(dir, func(t *testing.T) {
-			t.Parallel()
-
-			base := t.TempDir()
-			key := dir + "/aa/bb/object"
-
-			s, err := storage.NewFileStorer(base)
-			if err != nil {
-				t.Fatalf("NewFileStorer: %v", err)
-			}
-
-			err = s.Put(context.Background(), key, strings.NewReader("data"))
-			if err != nil {
-				t.Fatalf("Put: %v", err)
-			}
-
-			linkPath := filepath.Join(base, dir)
-			movedPath := filepath.Join(t.TempDir(), dir)
-
-			err = os.Rename(linkPath, movedPath)
-			if err != nil {
-				t.Fatalf("moving %s away: %v", dir, err)
-			}
-
-			err = os.Symlink(movedPath, linkPath)
-			if err != nil {
-				t.Fatalf("linking %s: %v", dir, err)
-			}
-
-			want := []string{key}
-
-			for _, prefix := range []string{"", dir + "/"} {
-				got := listSorted(t, s, prefix)
-				if !reflect.DeepEqual(got, want) {
-					t.Errorf("List(%q) = %v, want %v", prefix, got, want)
-				}
-
-				got = listStreamKeys(t, s, prefix)
-				if !reflect.DeepEqual(got, want) {
-					t.Errorf("ListStream(%q) = %v, want %v", prefix, got, want)
-				}
-			}
-		})
-	}
-}
-
-// TestFileStorerListFailsOnSymlinkWithMissingTarget checks that List and
-// ListStream fail on a symlinked metadata/ or blobs/ directory whose target
-// is missing, such as a link to a volume that is not mounted, as they do on
-// a missing destination directory, instead of listing it as empty.
-func TestFileStorerListFailsOnSymlinkWithMissingTarget(t *testing.T) {
-	t.Parallel()
-
-	ctx := context.Background()
-
-	for _, dir := range []string{"metadata", "blobs"} {
-		t.Run(dir, func(t *testing.T) {
-			t.Parallel()
-
-			base := t.TempDir()
-
-			s, err := storage.NewFileStorer(base)
-			if err != nil {
-				t.Fatalf("NewFileStorer: %v", err)
-			}
-
-			unmounted := filepath.Join(t.TempDir(), "unmounted")
-
-			err = os.Symlink(unmounted, filepath.Join(base, dir))
-			if err != nil {
-				t.Fatalf("Symlink: %v", err)
-			}
-
-			for _, prefix := range []string{"", dir + "/"} {
-				keys, err := s.List(ctx, prefix)
-				if !errors.Is(err, fs.ErrNotExist) {
-					t.Errorf("List(%q) = %v, %v; want a not-exist error",
-						prefix, keys, err)
-				}
-
-				var streamErr error
-
-				for object := range s.ListStream(ctx, prefix) {
-					if object.Err != nil {
-						streamErr = object.Err
-					}
-				}
-
-				if !errors.Is(streamErr, fs.ErrNotExist) {
-					t.Errorf("ListStream(%q) error = %v, want a not-exist error",
-						prefix, streamErr)
-				}
-			}
-		})
-	}
-}
-
-// TestFileStorerListFailsOnSymlinkLoop checks that a symlink pointing back
-// at the destination makes List and ListStream fail instead of walking it
-// forever.
-func TestFileStorerListFailsOnSymlinkLoop(t *testing.T) {
-	t.Parallel()
-
-	ctx := context.Background()
-	base := t.TempDir()
-
-	s, err := storage.NewFileStorer(base)
-	if err != nil {
-		t.Fatalf("NewFileStorer: %v", err)
-	}
-
-	err = s.Put(ctx, testBlobKey, strings.NewReader("data"))
-	if err != nil {
-		t.Fatalf("Put: %v", err)
-	}
-
-	err = os.Symlink(base, filepath.Join(base, "blobs", "loop"))
-	if err != nil {
-		t.Fatalf("Symlink: %v", err)
-	}
-
-	keys, err := s.List(ctx, "blobs/")
-	if err == nil {
-		t.Errorf("List = %d keys and no error, want an error", len(keys))
-	}
-
-	var streamErr error
-
-	for object := range s.ListStream(ctx, "blobs/") {
-		if object.Err != nil {
-			streamErr = object.Err
-		}
-	}
-
-	if streamErr == nil {
-		t.Error("ListStream sent no error, want one")
-	}
-}

internal/storage/url.go

@@ -17,8 +17,10 @@ const (
 
 // Sentinel errors for storage URL parsing.
 var (
-	ErrEmptyStorageURL   = errors.New("storage URL is empty")
-	ErrEmptyFilePath     = errors.New("file URL path is empty")
+	ErrEmptyStorageURL  = errors.New("storage URL is empty")
+	ErrEmptyFilePath    = errors.New("file URL path is empty")
+	ErrRelativeFilePath = errors.New(
+		"file URL needs an absolute path, as in file:///path/to/backup")
 	ErrMissingBucket     = errors.New("s3 URL missing bucket name")
 	ErrMissingRemote     = errors.New("rclone URL missing remote name")
 	ErrUnsupportedScheme = errors.New(
@@ -51,17 +53,8 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 		return nil, ErrEmptyStorageURL
 	}
 
-	// Handle file:// URLs
 	if after, ok := strings.CutPrefix(rawURL, "file://"); ok {
-		path := after
-		if path == "" {
-			return nil, ErrEmptyFilePath
-		}
-
-		return &URL{
-			Scheme: schemeFile,
-			Prefix: path,
-		}, nil
+		return parseFileURL(after)
 	}
 
 	if strings.HasPrefix(rawURL, "s3://") {
@@ -75,6 +68,27 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 	return nil, ErrUnsupportedScheme
 }
 
+// parseFileURL parses the path that follows file://. The path must be
+// absolute: a relative one would resolve against the working directory,
+// so the destination would move with it. Percent-escapes are decoded, so
+// my%20stick names the directory "my stick"; a literal space is kept.
+func parseFileURL(rawPath string) (*URL, error) {
+	if rawPath == "" {
+		return nil, ErrEmptyFilePath
+	}
+
+	if !strings.HasPrefix(rawPath, "/") {
+		return nil, ErrRelativeFilePath
+	}
+
+	path, err := url.PathUnescape(rawPath)
+	if err != nil {
+		return nil, fmt.Errorf("invalid file URL path: %w", err)
+	}
+
+	return &URL{Scheme: schemeFile, Prefix: path}, nil
+}
+
 // parseS3URL parses an s3://bucket/prefix URL. It rejects credentials in
 // the userinfo and any query parameter other than endpoint, region and
 // ssl, so a credential-bearing URL is never stored or echoed.

internal/storage/url_parse_test.go

@@ -14,7 +14,10 @@ import (
 func TestParseStorageURLValid(t *testing.T) {
 	t.Parallel()
 
-	const bucket = "mybucket"
+	const (
+		bucket     = "mybucket"
+		fileScheme = "file"
+	)
 
 	cases := []struct {
 		name string
@@ -24,7 +27,17 @@ func TestParseStorageURLValid(t *testing.T) {
 		{
 			name: "file absolute path",
 			raw:  "file:///var/backups/vaultik",
-			want: &storage.URL{Scheme: "file", Prefix: "/var/backups/vaultik"},
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/var/backups/vaultik"},
+		},
+		{
+			name: "file percent-escaped path is decoded",
+			raw:  "file:///Volumes/my%20stick/backup",
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
+		},
+		{
+			name: "file path with a literal space",
+			raw:  "file:///Volumes/my stick/backup",
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
 		},
 		{
 			name: "s3 bucket and prefix, ssl defaults on",
@@ -90,6 +103,7 @@ func TestParseStorageURLErrors(t *testing.T) {
 	}{
 		{"empty url", "", storage.ErrEmptyStorageURL},
 		{"file empty path", "file://", storage.ErrEmptyFilePath},
+		{"file relative path", "file://dest", storage.ErrRelativeFilePath},
 		{"s3 missing bucket", "s3://", storage.ErrMissingBucket},
 		{"s3 missing bucket with path", "s3:///justprefix", storage.ErrMissingBucket},
 		{"rclone missing remote", "rclone://", storage.ErrMissingRemote},

internal/vaultik/snapshot.go

@@ -28,8 +28,14 @@ var (
 	errNoAgeRecipients      = errors.New(
 		"creating a snapshot needs at least one public key in " +
 			"age_recipients (generate a keypair with: age-keygen)")
+	errKeepNewerThanNeedsPrune = errors.New("--keep-newer-than requires --prune")
 )
 
+// ErrPostBackupPruneFailed wraps a failure of the post-backup prune,
+// which runs only after every snapshot was created and uploaded, so the
+// caller can report it apart from a failed backup.
+var ErrPostBackupPruneFailed = errors.New("post-backup prune failed")
+
 // listRecentLimit caps how many snapshot rows are fetched from the
 // local index for listing and purge operations.
 const listRecentLimit = 10000
@@ -45,6 +51,26 @@ type SnapshotCreateOptions struct {
 	Snapshots     []string // Optional list of snapshot names to process (empty = all)
 }
 
+// Validate fails when KeepNewerThan is set without Prune or is not a
+// valid duration. Only the post-backup prune reads KeepNewerThan, after
+// the backup, so the caller checks it before starting one.
+func (opts *SnapshotCreateOptions) Validate() error {
+	if opts.KeepNewerThan == "" {
+		return nil
+	}
+
+	if !opts.Prune {
+		return errKeepNewerThanNeedsPrune
+	}
+
+	_, err := parseDuration(opts.KeepNewerThan)
+	if err != nil {
+		return fmt.Errorf("--keep-newer-than: %w", err)
+	}
+
+	return nil
+}
+
 // CreateSnapshot executes the snapshot creation operation
 func (v *Vaultik) CreateSnapshot(opts *SnapshotCreateOptions) error {
 	// config.Load accepts an empty list, since listing, verifying and
@@ -123,7 +149,7 @@ func (v *Vaultik) CreateSnapshot(opts *SnapshotCreateOptions) error {
 	if opts.Prune {
 		err = v.runPostBackupPrune(snapshotNames, opts.KeepNewerThan)
 		if err != nil {
-			return fmt.Errorf("post-backup prune: %w", err)
+			return fmt.Errorf("%w: %w", ErrPostBackupPruneFailed, err)
 		}
 	}
 

internal/vaultik/symlinked_destination_test.go

@@ -1,121 +0,0 @@
-package vaultik_test
-
-import (
-	"context"
-	"io/fs"
-	"os"
-	"path/filepath"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// TestPruneDeletesNothingThroughSymlinkedDirectory checks that prune keeps
-// every blob and the local snapshot record when the metadata/ or blobs/
-// directory of a file:// destination is a symlink to a directory elsewhere
-// (https://git.eeqj.de/sneak/vaultik/issues/296). A backup writes through
-// such a link, so prune has to list through it too.
-func TestPruneDeletesNothingThroughSymlinkedDirectory(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	for _, dir := range []string{"metadata", "blobs"} {
-		t.Run(dir, func(t *testing.T) {
-			t.Parallel()
-
-			ctx := context.Background()
-			storeDir := filepath.Join(t.TempDir(), "store")
-			v, repos, _ := backUpToFileDestination(ctx, t, storeDir)
-			blobFiles := blobFilesIn(t, storeDir)
-			moveBehindSymlink(t, storeDir, dir)
-
-			require.NoError(t, v.Prune(&vaultik.PruneOptions{Force: true}))
-
-			// When blobs/ is the link, these paths run through it.
-			for _, blobFile := range blobFiles {
-				assert.FileExists(t, blobFile, "prune must delete no blob")
-			}
-
-			snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
-			require.NoError(t, err)
-			assert.Len(t, snapshots, 1, "prune must delete no local snapshot record")
-		})
-	}
-}
-
-// TestPruneFailsOnSymlinkedDirectoryWithMissingTarget checks that prune
-// fails, deleting no blob and keeping the local snapshot record, when the
-// metadata/ or blobs/ directory of a file:// destination is a symlink
-// whose target is missing, as a link to a volume that is not mounted is.
-func TestPruneFailsOnSymlinkedDirectoryWithMissingTarget(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	for _, dir := range []string{"metadata", "blobs"} {
-		t.Run(dir, func(t *testing.T) {
-			t.Parallel()
-
-			ctx := context.Background()
-			storeDir := filepath.Join(t.TempDir(), "store")
-			v, repos, _ := backUpToFileDestination(ctx, t, storeDir)
-			blobFiles := blobFilesIn(t, storeDir)
-			targetPath := moveBehindSymlink(t, storeDir, dir)
-
-			// Unmount the volume the link points to, and mount it again
-			// once prune has run.
-			unmountedPath := targetPath + "-unmounted"
-			require.NoError(t, os.Rename(targetPath, unmountedPath))
-
-			err := v.Prune(&vaultik.PruneOptions{Force: true})
-			require.ErrorIs(t, err, fs.ErrNotExist)
-
-			require.NoError(t, os.Rename(unmountedPath, targetPath))
-
-			// When blobs/ is the link, these paths run through it.
-			for _, blobFile := range blobFiles {
-				assert.FileExists(t, blobFile, "prune must delete no blob")
-			}
-
-			snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
-			require.NoError(t, err)
-			assert.Len(t, snapshots, 1, "prune must delete no local snapshot record")
-		})
-	}
-}
-
-// blobFilesIn returns the paths of the blob files under storeDir/blobs, and
-// fails the test when there are none.
-func blobFilesIn(t *testing.T, storeDir string) []string {
-	t.Helper()
-
-	var blobFiles []string
-
-	err := filepath.WalkDir(filepath.Join(storeDir, "blobs"),
-		func(path string, entry fs.DirEntry, err error) error {
-			if err == nil && !entry.IsDir() {
-				blobFiles = append(blobFiles, path)
-			}
-
-			return err
-		})
-	require.NoError(t, err)
-	require.NotEmpty(t, blobFiles)
-
-	return blobFiles
-}
-
-// moveBehindSymlink moves storeDir/dir to a directory elsewhere, puts a
-// symlink to it in its place, and returns where it went.
-func moveBehindSymlink(t *testing.T, storeDir, dir string) string {
-	t.Helper()
-
-	linkPath := filepath.Join(storeDir, dir)
-	targetPath := filepath.Join(t.TempDir(), dir)
-	require.NoError(t, os.Rename(linkPath, targetPath))
-	require.NoError(t, os.Symlink(targetPath, linkPath))
-
-	return targetPath
-}