Make config set create a list for an index under a missing key (closes #308)

`config set age_recipients.0 age1...` on a file without `age_recipients`
wrote a map keyed `0`, after which no command could load the config. A
missing key is now created as a list when the next path element is a
number.

`config set` checks its result with the config loader before writing and
refuses a failure the change brings in: a config that loaded must still
load, and one still being filled in (failing validation until complete)
must still decode into the config type. The new `config.Parse`, split out
of `config.Load`, decodes config data, filling in `${...}` references,
without validating.

Rule suppressed: gosec G304 where `config.Load` and the new tests read a
file.

Model: opus-5-5

README.md

@@ -271,8 +271,16 @@ existing file. Created with mode `0600` since it will contain credentials.
 **`config set`**: Set a scalar config value by dotted YAML path
 (e.g. `vaultik config set compression_level 9`,
 `vaultik config set storage_url "file:///mnt/backups"`). Comments and
-formatting in the file are preserved; intermediate maps are created as
-needed.
+formatting in the file are preserved. Missing keys along the path are
+created: as a list when the next path element is a number (so
+`vaultik config set age_recipients.0 age1...` works on a file without
+`age_recipients`), otherwise as a map. If the config loads, a change
+after which it would not, such as `vaultik config set compression_level 99`,
+is refused and the file is left unchanged. A config that does not load
+yet, such as the one `config init` writes before `storage_url` is set,
+can be filled in one setting at a time: only a change that gives a
+setting the wrong type, such as a single value where a list belongs or a
+word where a number belongs, is refused.
 
 **`snapshot create`**: Perform incremental backup of configured snapshots.
 * Optional snapshot names argument to create specific snapshots (default: all)
@@ -293,8 +301,8 @@ needed.
 **`snapshot list`**: Show every snapshot known to this host — the union
 of the local index and the backup destination store — with timestamps
 and three sizes per snapshot (compressed remote size; total
-uncompressed chunk size; size of the chunks that snapshot stored that
-were not stored before, recorded when its backup ran).
+uncompressed chunk size; size of chunks newly referenced by that
+snapshot).
 
 Listing the destination store does **not** require the age secret key,
 so it works in vaultik's intended configuration, where the backed-up
@@ -307,8 +315,8 @@ only the hash, so hostname and snapshot name exist solely in the local
 index and in the encrypted per-snapshot database. Snapshots found only
 on the destination store are therefore listed as
 `<remote only:<abbreviated remote key>>` and show `<remote only>` in
-the uncompressed and "new chunk" columns, which come only from the
-local index. Their timestamp and compressed size are real,
+the uncompressed and "new chunk" columns, which can only be computed
+from the local index. Their timestamp and compressed size are real,
 read from the manifest.
 
 Snapshots in the local index with no counterpart on the destination

docs/DATAMODEL.md

@@ -119,7 +119,6 @@ Tracks backup snapshots.
 - `completed_at` (INTEGER) - Completion timestamp (NULL if in progress)
 - `file_count` (INTEGER) - Number of files in snapshot
 - `chunk_count` (INTEGER) - Number of chunks this snapshot stored that were not stored before
-- `new_chunk_size` (INTEGER) - Total size of those chunks before compression; `snapshot list` shows it as NEW CHUNK SIZE
 - `blob_count` (INTEGER) - Number of blobs this snapshot created
 - `total_size` (INTEGER) - Total size of all files
 - `blob_size` (INTEGER) - Total compressed size of all referenced blobs

internal/cli/config.go

@@ -44,6 +44,9 @@ var (
 	errNeedNumericIndex = errors.New("key is a list; use a numeric index")
 	errIndexOutOfRange  = errors.New("index out of range")
 	errNotMapOrList     = errors.New("key is not a map or list")
+	errWouldNotLoad     = errors.New(
+		"vaultik would not load the config after this change, " +
+			"so the file was not changed")
 )
 
 const defaultConfigTemplate = `# vaultik configuration
@@ -391,8 +394,15 @@ func newConfigSetCommand() *cobra.Command {
 		Use:   "set <key> <value>",
 		Short: "Set a config value by dotted path (e.g. compression_level 5)",
 		Long: `Sets a scalar config value addressed by dotted YAML path and writes
-the file back, preserving comments and formatting. Intermediate maps
-are created as needed.
+the file back, preserving comments and formatting. Missing keys along
+the path are created: as a list when the next path element is a
+number, otherwise as a map.
+
+If the config loads, a change after which it would not, such as
+compression_level 99, is refused and the file is left unchanged. A
+config that does not load yet, such as the one config init writes
+before storage_url is set, can be filled in one setting at a time:
+only a change that gives a setting the wrong type is refused.
 
 Examples:
   vaultik config set storage_url "file:///mnt/backups"
@@ -422,6 +432,11 @@ func writeConfigSet(out *ui.Writer, path, key, value string) error {
 		return err
 	}
 
+	oldData, err := marshalConfigYAML(root)
+	if err != nil {
+		return fmt.Errorf("marshaling config: %w", err)
+	}
+
 	err = yamlPathSet(root, strings.Split(key, "."), value)
 	if err != nil {
 		return err
@@ -432,6 +447,11 @@ func writeConfigSet(out *ui.Writer, path, key, value string) error {
 		return fmt.Errorf("marshaling config: %w", err)
 	}
 
+	err = checkConfigChange(oldData, data)
+	if err != nil {
+		return fmt.Errorf("%w: %w", errWouldNotLoad, err)
+	}
+
 	err = os.WriteFile(path, data, configFileMode)
 	if err != nil {
 		return fmt.Errorf("writing config file: %w", err)
@@ -453,6 +473,28 @@ func writeConfigSet(out *ui.Writer, path, key, value string) error {
 	return nil
 }
 
+// checkConfigChange returns the reason vaultik would not load newData, the
+// config after a change, if the change brings that failure in. If oldData,
+// the config before it, decodes into the config type, the new one must
+// too; if the old one also passes validation, the new one must pass it. A
+// config still being filled in fails validation until it is complete, so
+// only decoding is checked for it.
+func checkConfigChange(oldData, newData []byte) error {
+	oldCfg, oldErr := config.Parse(oldData)
+	if oldErr == nil {
+		newCfg, err := config.Parse(newData)
+		if err != nil {
+			return err
+		}
+
+		if oldCfg.Validate() == nil {
+			return newCfg.Validate()
+		}
+	}
+
+	return nil
+}
+
 // marshalConfigYAML renders a config document tree with 2-space indentation,
 // matching defaultConfigTemplate. yaml.Marshal defaults to 4 spaces, which
 // would reindent the whole file on the first `config set` despite the promise
@@ -559,8 +601,8 @@ func yamlPathGet(root *yaml.Node, keys []string) (*yaml.Node, error) {
 	return node, nil
 }
 
-// yamlPathSet navigates a dotted key path, creating intermediate maps as
-// needed, and sets the final key to the given scalar value. Numeric path
+// yamlPathSet navigates a dotted key path, creating missing keys as needed,
+// and sets the final key to the given scalar value. Numeric path
 // components index into sequences; an index equal to the sequence length
 // appends a new element (e.g. "age_recipients.1" on a 1-element list).
 func yamlPathSet(root *yaml.Node, keys []string, value string) error {
@@ -573,12 +615,12 @@ func yamlPathSet(root *yaml.Node, keys []string, value string) error {
 		node = node.Content[0]
 	}
 
-	for i, key := range keys {
+	for i := range keys {
 		last := i == len(keys)-1
 
 		switch node.Kind {
 		case yaml.MappingNode:
-			node = yamlSetInMapping(node, key, value, last)
+			node = yamlSetInMapping(node, keys, i, value, last)
 		case yaml.SequenceNode:
 			next, err := yamlSetInSequence(node, keys, i, value, last)
 			if err != nil {
@@ -647,14 +689,16 @@ func yamlField(typ reflect.Type, key string) (reflect.StructField, bool) {
 	return reflect.StructField{}, false
 }
 
-// yamlSetInMapping resolves (creating if needed) the value node for key
-// within a mapping node, setting it to value when it is the final path
-// element, and returns the node to descend into.
-func yamlSetInMapping(node *yaml.Node, key, value string, last bool) *yaml.Node {
+// yamlSetInMapping resolves (creating if needed) the value node for the
+// path element keys[i] within a mapping node, setting it to value when it
+// is the final path element, and returns the node to descend into.
+func yamlSetInMapping(
+	node *yaml.Node, keys []string, i int, value string, last bool,
+) *yaml.Node {
 	var valueNode *yaml.Node
 
 	for j := 0; j+1 < len(node.Content); j += 2 {
-		if node.Content[j].Value == key {
+		if node.Content[j].Value == keys[i] {
 			valueNode = node.Content[j+1]
 
 			break
@@ -662,13 +706,8 @@ func yamlSetInMapping(node *yaml.Node, key, value string, last bool) *yaml.Node
 	}
 
 	if valueNode == nil {
-		keyNode := &yaml.Node{Kind: yaml.ScalarNode, Value: key}
-
-		valueNode = &yaml.Node{Kind: yaml.MappingNode}
-		if last {
-			valueNode = &yaml.Node{Kind: yaml.ScalarNode, Value: value}
-		}
-
+		keyNode := &yaml.Node{Kind: yaml.ScalarNode, Value: keys[i]}
+		valueNode = newPathNode(keys, i, value)
 		node.Content = append(node.Content, keyNode, valueNode)
 	} else if last {
 		setScalar(valueNode, value)
@@ -696,12 +735,7 @@ func yamlSetInSequence(
 	}
 
 	if idx == len(node.Content) {
-		newNode := &yaml.Node{Kind: yaml.MappingNode}
-		if last {
-			newNode = &yaml.Node{Kind: yaml.ScalarNode, Value: value}
-		}
-
-		node.Content = append(node.Content, newNode)
+		node.Content = append(node.Content, newPathNode(keys, i, value))
 	} else if last {
 		setScalar(node.Content[idx], value)
 	}
@@ -709,6 +743,22 @@ func yamlSetInSequence(
 	return node.Content[idx], nil
 }
 
+// newPathNode returns the node to create for the missing path element
+// keys[i]: the value when it is the final path element, otherwise an empty
+// list when the next path element is a number and an empty map when not.
+func newPathNode(keys []string, i int, value string) *yaml.Node {
+	if i == len(keys)-1 {
+		return &yaml.Node{Kind: yaml.ScalarNode, Value: value}
+	}
+
+	_, err := strconv.Atoi(keys[i+1])
+	if err == nil {
+		return &yaml.Node{Kind: yaml.SequenceNode}
+	}
+
+	return &yaml.Node{Kind: yaml.MappingNode}
+}
+
 // setScalar overwrites a node in place with a plain scalar value.
 func setScalar(n *yaml.Node, value string) {
 	n.Kind = yaml.ScalarNode

internal/cli/config_test.go

@@ -58,14 +58,16 @@ func TestDefaultConfigTemplateParses(t *testing.T) {
 	}
 }
 
+// testRecipient is a valid age public key.
+const testRecipient = "age1278m9q7dp3chsh2dcy82qk27v047zywyvtxwnj4cvt0z65jw6a7q5dqhfj"
+
 // TestConfigSetRecipientOnFreshConfig follows the README quickstart: on the
 // file `config init` writes, `config set age_recipients.0` and
 // `config set storage_url` give a config that loads with that recipient.
+// Neither is refused, although the config does not load until both are set.
 func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 	t.Parallel()
 
-	const recipient = "age1278m9q7dp3chsh2dcy82qk27v047zywyvtxwnj4cvt0z65jw6a7q5dqhfj"
-
 	path := filepath.Join(t.TempDir(), "config.yml")
 
 	err := os.WriteFile(path, []byte(defaultConfigTemplate), configFileMode)
@@ -75,7 +77,7 @@ func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 
 	out := ui.NewWithColor(&bytes.Buffer{}, false)
 
-	err = writeConfigSet(out, path, "age_recipients.0", recipient)
+	err = writeConfigSet(out, path, "age_recipients.0", testRecipient)
 	if err != nil {
 		t.Fatalf("config set age_recipients.0: %v", err)
 	}
@@ -90,8 +92,177 @@ func TestConfigSetRecipientOnFreshConfig(t *testing.T) {
 		t.Fatalf("config.Load: %v", err)
 	}
 
-	if len(cfg.AgeRecipients) != 1 || cfg.AgeRecipients[0] != recipient {
-		t.Errorf("age_recipients = %v, want [%s]", cfg.AgeRecipients, recipient)
+	if len(cfg.AgeRecipients) != 1 || cfg.AgeRecipients[0] != testRecipient {
+		t.Errorf("age_recipients = %v, want [%s]", cfg.AgeRecipients, testRecipient)
+	}
+}
+
+// configWithoutRecipients loads, but has no age_recipients key and no
+// snapshot named work.
+const configWithoutRecipients = `storage_url: file:///mnt/backups
+snapshots:
+  home:
+    paths:
+      - "~"
+`
+
+// TestConfigSetIndexUnderMissingKey checks that a list index under a key
+// the file does not have creates a list, and that the result loads.
+func TestConfigSetIndexUnderMissingKey(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		key   string
+		value string
+		field func(cfg *config.Config) []string
+	}{
+		{"age_recipients.0", testRecipient,
+			func(cfg *config.Config) []string { return cfg.AgeRecipients }},
+		{"snapshots.work.paths.0", "/srv/work",
+			func(cfg *config.Config) []string { return cfg.Snapshots["work"].Paths }},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.key, func(t *testing.T) {
+			t.Parallel()
+
+			path := filepath.Join(t.TempDir(), "config.yml")
+
+			err := os.WriteFile(path, []byte(configWithoutRecipients), configFileMode)
+			if err != nil {
+				t.Fatalf("write config: %v", err)
+			}
+
+			err = writeConfigSet(ui.NewWithColor(&bytes.Buffer{}, false),
+				path, tt.key, tt.value)
+			if err != nil {
+				t.Fatalf("config set %s: %v", tt.key, err)
+			}
+
+			cfg, err := config.Load(path)
+			if err != nil {
+				t.Fatalf("config.Load: %v", err)
+			}
+
+			got := tt.field(cfg)
+			if len(got) != 1 || got[0] != tt.value {
+				t.Errorf("%s gives %v, want [%s]", tt.key, got, tt.value)
+			}
+		})
+	}
+}
+
+// TestConfigSetKeepsFileThatWouldNotLoad checks that config set refuses a
+// change after which the config would not load, with an error giving the
+// reason, and leaves the file as it was. On the file `config init` writes,
+// which does not load until storage_url is set, only a value of the wrong
+// type is refused.
+func TestConfigSetKeepsFileThatWouldNotLoad(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		config string
+		key    string
+		value  string
+		reason string
+	}{
+		// Index 1 of the empty list the missing key gives.
+		{configWithoutRecipients, "age_recipients.1", testRecipient,
+			"index out of range"},
+		// A list set to a single value.
+		{configWithoutRecipients, "snapshots.home.paths", "/srv",
+			"cannot unmarshal"},
+		{configWithoutRecipients, "compression_level", "fast",
+			"cannot unmarshal"},
+		// Values of the right type that fail validation.
+		{configWithoutRecipients, "compression_level", "99",
+			"compression_level must be between 1 and 19"},
+		{configWithoutRecipients, "chunk_size", "1KB",
+			"chunk_size must be at least 1MB"},
+		{configWithoutRecipients, "age_recipients.0", "notakey",
+			"not a valid recipient"},
+		// The type check on a config that does not load yet.
+		{defaultConfigTemplate, "snapshots.apps.paths", "/srv",
+			"cannot unmarshal"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.key+" "+tt.value, func(t *testing.T) {
+			t.Parallel()
+
+			path := filepath.Join(t.TempDir(), "config.yml")
+
+			err := os.WriteFile(path, []byte(tt.config), configFileMode)
+			if err != nil {
+				t.Fatalf("write config: %v", err)
+			}
+
+			err = writeConfigSet(ui.NewWithColor(&bytes.Buffer{}, false),
+				path, tt.key, tt.value)
+			if err == nil || !strings.Contains(err.Error(), tt.reason) {
+				t.Errorf("config set %s %s gives error %v, want one saying %q",
+					tt.key, tt.value, err, tt.reason)
+			}
+
+			data, err := os.ReadFile(path) //nolint:gosec // G304: test-controlled path
+			if err != nil {
+				t.Fatalf("read config: %v", err)
+			}
+
+			if string(data) != tt.config {
+				t.Errorf("config set %s changed the file to:\n%s",
+					tt.key, data)
+			}
+		})
+	}
+}
+
+// TestConfigSetRefusesOnlyItsOwnFailure checks that setting another key
+// works on a config with a ${...} reference on compression_level, which
+// loads because loading fills the reference in, and on one whose
+// compression_level already fails to load.
+func TestConfigSetRefusesOnlyItsOwnFailure(t *testing.T) {
+	t.Parallel()
+
+	levelPath := filepath.Join(t.TempDir(), "level")
+
+	err := os.WriteFile(levelPath, []byte("9"), configFileMode)
+	if err != nil {
+		t.Fatalf("write level: %v", err)
+	}
+
+	configs := map[string]string{
+		"reference": configWithoutRecipients +
+			"compression_level: ${FILE:" + levelPath + "}\n",
+		"failing": configWithoutRecipients + "compression_level: fast\n",
+	}
+
+	for name, configYAML := range configs {
+		t.Run(name, func(t *testing.T) {
+			t.Parallel()
+
+			path := filepath.Join(t.TempDir(), "config.yml")
+
+			err := os.WriteFile(path, []byte(configYAML), configFileMode)
+			if err != nil {
+				t.Fatalf("write config: %v", err)
+			}
+
+			err = writeConfigSet(ui.NewWithColor(&bytes.Buffer{}, false),
+				path, "hostname", "myhost")
+			if err != nil {
+				t.Fatalf("config set hostname: %v", err)
+			}
+
+			data, err := os.ReadFile(path) //nolint:gosec // G304: test-controlled path
+			if err != nil {
+				t.Fatalf("read config: %v", err)
+			}
+
+			if !strings.Contains(string(data), "hostname: myhost") {
+				t.Errorf("config set hostname wrote:\n%s", data)
+			}
+		})
 	}
 }
 

internal/config/config.go

@@ -4,6 +4,7 @@
 package config
 
 import (
+	"bytes"
 	"errors"
 	"fmt"
 	"os"
@@ -233,14 +234,48 @@ func New(path Path) (*Config, error) {
 	return cfg, nil
 }
 
-// Load reads and parses the configuration file from the specified path.
-// It applies default values for optional fields, performs environment variable
-// substitution using smartconfig, and validates the configuration.
-// The configuration file should be in YAML format. Returns an error if the file
-// cannot be read, parsed, or if validation fails.
+// Load reads the configuration file at path, parses it with Parse, warns
+// when others can read the file, and validates the configuration.
+// Returns an error if the file cannot be read, parsed, or if validation
+// fails.
 func Load(path string) (*Config, error) {
+	data, err := os.ReadFile(path) //nolint:gosec // G304: config path is operator-supplied
+	if err != nil {
+		return nil, fmt.Errorf("failed to load config file: %w", err)
+	}
+
+	cfg, err := Parse(data)
+	if err != nil {
+		return nil, err
+	}
+
+	// Check config file permissions (warn if world or group readable)
+	//nolint:gosec // G703: config path is operator-supplied by design
+	info, statErr := os.Stat(path)
+	if statErr == nil {
+		mode := info.Mode().Perm()
+		if mode&0044 != 0 { // group or world readable
+			log.Warn(cfg.readableByOthersWarning(),
+				"path", path,
+				"mode", fmt.Sprintf("%04o", mode),
+				"recommendation", "chmod 600 "+path)
+		}
+	}
+
+	err = cfg.Validate()
+	if err != nil {
+		return nil, fmt.Errorf("invalid config: %w", err)
+	}
+
+	return cfg, nil
+}
+
+// Parse reads YAML config data as Load does, without validating it. It
+// applies default values for optional fields, fills in ${...} references
+// using smartconfig, and expands ~ in paths.
+func Parse(data []byte) (*Config, error) {
 	// Load config using smartconfig for interpolation
-	sc, err := smartconfig.NewFromConfigPath(path)
+	sc, err := smartconfig.NewFromReader(bytes.NewReader(data))
 	if err != nil {
 		return nil, fmt.Errorf("failed to load config file: %w", err)
 	}
@@ -302,24 +337,6 @@ func Load(path string) (*Config, error) {
 		cfg.S3.Region = "us-east-1"
 	}
 
-	// Check config file permissions (warn if world or group readable)
-	//nolint:gosec // G703: config path is operator-supplied by design
-	info, statErr := os.Stat(path)
-	if statErr == nil {
-		mode := info.Mode().Perm()
-		if mode&0044 != 0 { // group or world readable
-			log.Warn(cfg.readableByOthersWarning(),
-				"path", path,
-				"mode", fmt.Sprintf("%04o", mode),
-				"recommendation", "chmod 600 "+path)
-		}
-	}
-
-	err = cfg.Validate()
-	if err != nil {
-		return nil, fmt.Errorf("invalid config: %w", err)
-	}
-
 	return cfg, nil
 }
 

internal/database/schema/001.sql

@@ -86,7 +86,6 @@ CREATE TABLE IF NOT EXISTS snapshots (
     completed_at INTEGER,
     file_count INTEGER NOT NULL DEFAULT 0,
     chunk_count INTEGER NOT NULL DEFAULT 0,
-    new_chunk_size INTEGER NOT NULL DEFAULT 0,
     blob_count INTEGER NOT NULL DEFAULT 0,
     total_size INTEGER NOT NULL DEFAULT 0,
     blob_size INTEGER NOT NULL DEFAULT 0,

internal/database/snapshots.go

@@ -129,7 +129,6 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 	compressionLevel int,
 	uploadBytes int64,
 	uploadDurationMs int64,
-	newChunkSize int64,
 ) error {
 	compressionRatio, err := r.extendedCompressionRatio(
 		ctx, tx, snapshotID, blobUncompressedSize,
@@ -144,19 +143,18 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 		    compression_ratio = ?,
 		    compression_level = ?,
 		    upload_bytes = ?,
-		    upload_duration_ms = ?,
-		    new_chunk_size = ?
+		    upload_duration_ms = ?
 		WHERE id = ?
 	`
 
 	if tx != nil {
 		_, err = tx.ExecContext(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
+			uploadBytes, uploadDurationMs, snapshotID)
 	} else {
 		_, err = r.db.ExecWithLog(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
+			uploadBytes, uploadDurationMs, snapshotID)
 	}
 
 	if err != nil {
@@ -596,24 +594,45 @@ func (r *SnapshotRepository) GetSnapshotUncompressedChunkSize(
 	return totalSize, nil
 }
 
-// GetSnapshotNewChunkSize returns the total plaintext size of the chunks the
-// snapshot's backup stored that were not stored before, as the backup
-// recorded it. It is not derived from the snapshot's files: a file's row is
-// shared by every snapshot that lists it and is rewritten when the file
-// changes, so it shows only the file's latest chunks.
+// GetSnapshotNewChunkSize returns the sum of plaintext sizes of chunks that are
+// referenced by this snapshot but not by any earlier completed snapshot known to
+// the local database. The result is the marginal uncompressed data this snapshot
+// added to the dedup pool — i.e., the delta from prior snapshots.
 func (r *SnapshotRepository) GetSnapshotNewChunkSize(
 	ctx context.Context, snapshotID string,
 ) (int64, error) {
-	query := `SELECT new_chunk_size FROM snapshots WHERE id = ?`
+	query := `
+		WITH this_snap_chunks AS (
+			SELECT DISTINCT fc.chunk_hash
+			FROM snapshot_files sf
+			JOIN file_chunks fc ON sf.file_id = fc.file_id
+			WHERE sf.snapshot_id = ?
+		),
+		prior_chunks AS (
+			SELECT DISTINCT fc.chunk_hash
+			FROM snapshots s
+			JOIN snapshot_files sf ON sf.snapshot_id = s.id
+			JOIN file_chunks fc ON fc.file_id = sf.file_id
+			WHERE s.completed_at IS NOT NULL
+			  AND s.id != ?
+			  AND s.started_at < (SELECT started_at FROM snapshots WHERE id = ?)
+		)
+		SELECT COALESCE(SUM(c.size), 0)
+		FROM chunks c
+		JOIN this_snap_chunks t ON c.chunk_hash = t.chunk_hash
+		WHERE c.chunk_hash NOT IN (SELECT chunk_hash FROM prior_chunks)
+	`
 
-	var newChunkSize int64
+	var totalSize int64
 
-	err := r.db.conn.QueryRowContext(ctx, query, snapshotID).Scan(&newChunkSize)
+	err := r.db.conn.QueryRowContext(
+		ctx, query, snapshotID, snapshotID, snapshotID,
+	).Scan(&totalSize)
 	if err != nil {
 		return 0, fmt.Errorf("querying new chunk size: %w", err)
 	}
 
-	return newChunkSize, nil
+	return totalSize, nil
 }
 
 // GetIncompleteSnapshots returns all snapshots that haven't been completed

internal/snapshot/scanner.go

@@ -135,9 +135,7 @@ type ScannerConfig struct {
 // are counted per file: BytesScanned is the size of the new and changed
 // files, BytesSkipped that of the unchanged ones. FilesFailed counts the
 // new and changed files that phase 2 could not store; FilesScanned
-// includes them and BytesScanned does not. ChunksCreated counts the
-// chunks that were not already stored, and NewChunkSize is their total
-// size.
+// includes them and BytesScanned does not.
 type ScanResult struct {
 	FilesScanned   int
 	FilesSkipped   int
@@ -147,7 +145,6 @@ type ScanResult struct {
 	BytesSkipped   int64
 	BytesDeleted   int64
 	ChunksCreated  int
-	NewChunkSize   int64
 	BlobsCreated   int
 	BlobsUploaded  int
 	BytesUploaded  int64
@@ -1869,12 +1866,11 @@ func (s *Scanner) processFileStreaming(
 	return nil
 }
 
-// updateChunkStats counts a chunk that was not already stored, and its
-// size. The scan result's file counts, BytesScanned and BytesSkipped are
-// not touched here: the scan phase counts each file once.
+// updateChunkStats counts a chunk that was not already stored. The scan
+// result's file counts, BytesScanned and BytesSkipped are not touched
+// here: the scan phase counts each file once.
 func (s *Scanner) updateChunkStats(chunkSize int64, result *ScanResult) {
 	result.ChunksCreated++
-	result.NewChunkSize += chunkSize
 
 	if s.progress != nil {
 		s.progress.GetStats().ChunksCreated.Add(1)

internal/snapshot/snapshot.go

@@ -199,7 +199,6 @@ func (sm *SnapshotManager) UpdateSnapshotStatsExtended(
 			stats.CompressionLevel,
 			stats.BytesUploaded,
 			stats.UploadDurationMs,
-			stats.NewChunkSize,
 		)
 	})
 }
@@ -907,7 +906,6 @@ type ExtendedBackupStats struct {
 	BlobUncompressedSize int64 // Total uncompressed size of all referenced blobs
 	CompressionLevel     int   // Compression level used for this snapshot
 	UploadDurationMs     int64 // Total milliseconds spent uploading to S3
-	NewChunkSize         int64 // Total size of the chunks counted in ChunksCreated
 }
 
 // deleteOtherSnapshots deletes all snapshots except the current one

internal/vaultik/blob_fetch.go

@@ -103,6 +103,8 @@ func (v *Vaultik) FetchAndDecryptBlob(
 }
 
 // FetchBlob downloads a blob and returns a reader for the encrypted data.
+// The reader is closed as soon as ctx is cancelled, which ends a read
+// blocked inside it.
 func (v *Vaultik) FetchBlob(
 	ctx context.Context, blobHash string,
 ) (io.ReadCloser, error) {
@@ -120,5 +122,47 @@ func (v *Vaultik) FetchBlob(
 		return nil, fmt.Errorf("downloading blob %s: %w", shortHash(blobHash), err)
 	}
 
-	return rc, nil
+	return newCloseOnCancelReader(ctx, rc), nil
+}
+
+// closeOnCancelReader closes the reader it wraps when ctx is cancelled.
+// Not every backend's reader stops on cancel by itself (the file
+// backend's does not), and a read stalled on a slow or hung source would
+// otherwise outlast the shutdown timeout, so the process would exit
+// before restore or deep verify removed its decrypted temporary files.
+type closeOnCancelReader struct {
+	io.ReadCloser
+
+	ctx  context.Context //nolint:containedctx // Read reports its error
+	stop func() bool
+}
+
+func newCloseOnCancelReader(
+	ctx context.Context, rc io.ReadCloser,
+) *closeOnCancelReader {
+	return &closeOnCancelReader{
+		ReadCloser: rc,
+		ctx:        ctx,
+		stop:       context.AfterFunc(ctx, func() { _ = rc.Close() }),
+	}
+}
+
+// Read returns the context's error, not the closed reader's, once ctx
+// has been cancelled.
+func (r *closeOnCancelReader) Read(p []byte) (int, error) {
+	n, err := r.ReadCloser.Read(p)
+	if err != nil && r.ctx.Err() != nil {
+		return n, r.ctx.Err()
+	}
+
+	return n, err
+}
+
+// Close closes the wrapped reader, unless the cancel already closed it.
+func (r *closeOnCancelReader) Close() error {
+	if !r.stop() {
+		return nil
+	}
+
+	return r.ReadCloser.Close()
 }

internal/vaultik/new_chunk_size_test.go

@@ -1,133 +0,0 @@
-package vaultik_test
-
-import (
-	"bytes"
-	"context"
-	"maps"
-	"path/filepath"
-	"testing"
-
-	"github.com/spf13/afero"
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/chunker"
-	"sneak.berlin/go/vaultik/internal/database"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/storage"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// TestNewChunkSizeOfChangedFileStaysFixed covers
-// https://git.eeqj.de/sneak/vaultik/issues/311. A backup whose only change
-// is a modified file lists the size of the chunks that change added as its
-// NEW CHUNK SIZE, and a later backup that changes the file again leaves
-// every earlier snapshot's figure as it was. The file's row in the local
-// index is shared by all three snapshots and rewritten by each backup.
-func TestNewChunkSizeOfChangedFileStaysFixed(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	fs := afero.NewOsFs()
-	tempDir := t.TempDir()
-	dataDir := filepath.Join(tempDir, "src")
-	dbPath := filepath.Join(tempDir, "index.sqlite")
-	changedPath := filepath.Join(dataDir, "changed.bin")
-
-	ctx := context.Background()
-	files := writeFaultSourceTree(t, fs, dataDir)
-	cfg := changedFileConfig(dataDir, dbPath)
-
-	appendRandomBytes(t, fs, files, changedPath, appendedFileSize)
-
-	store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
-	require.NoError(t, err)
-
-	db, err := database.New(ctx, dbPath)
-	require.NoError(t, err)
-	t.Cleanup(func() { _ = db.Close() })
-
-	repos := database.NewRepositories(db)
-	v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
-
-	require.NoError(t, backUp(v, "first"))
-
-	firstFiles := maps.Clone(files)
-	firstID := localSnapshotID(ctx, t, repos, "first")
-
-	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
-	require.NoError(t, backUp(v, "second"))
-
-	secondID := localSnapshotID(ctx, t, repos, "second")
-	secondAdded := sizeOfNewChunks(t, files, firstFiles)
-	require.Positive(t, secondAdded)
-	assert.Equal(t, secondAdded, listedNewChunkSizes(t, v)[secondID],
-		"the second snapshot must count the chunks the change added")
-
-	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
-	require.NoError(t, backUp(v, "third"))
-
-	sizes := listedNewChunkSizes(t, v)
-	assert.Equal(t, sizeOfNewChunks(t, firstFiles, nil), sizes[firstID],
-		"a later backup must not change the first snapshot's figure")
-	assert.Equal(t, secondAdded, sizes[secondID],
-		"a later backup must not change the second snapshot's figure")
-}
-
-// sizeOfNewChunks returns the total size of the distinct chunks of the
-// files in after that no file in before has, cut the way the backup cuts
-// them.
-func sizeOfNewChunks(t *testing.T, after, before map[string][]byte) int64 {
-	t.Helper()
-
-	known := make(map[string]bool)
-	for _, chunk := range chunksOf(t, before) {
-		known[chunk.Hash] = true
-	}
-
-	var total int64
-
-	for _, chunk := range chunksOf(t, after) {
-		if !known[chunk.Hash] {
-			known[chunk.Hash] = true
-			total += chunk.Size
-		}
-	}
-
-	return total
-}
-
-// chunksOf returns the chunks of every file in files.
-func chunksOf(t *testing.T, files map[string][]byte) []chunker.Chunk {
-	t.Helper()
-
-	c := chunker.NewChunker(faultChunkSize)
-
-	var all []chunker.Chunk
-
-	for _, content := range files {
-		chunks, err := c.ChunkReader(bytes.NewReader(content))
-		require.NoError(t, err)
-
-		all = append(all, chunks...)
-	}
-
-	return all
-}
-
-// listedNewChunkSizes runs `snapshot list --json` and returns each listed
-// snapshot's new_chunk_size by snapshot ID.
-func listedNewChunkSizes(t *testing.T, v *vaultik.Vaultik) map[string]int64 {
-	t.Helper()
-
-	var out bytes.Buffer
-
-	v.Stdout = &out
-	require.NoError(t, v.ListSnapshots(true))
-
-	sizes := make(map[string]int64)
-	for _, row := range decodeListJSON(t, out.String()) {
-		sizes[row.ID] = row.NewChunkSize
-	}
-
-	return sizes
-}

internal/vaultik/restore_interrupt_test.go

@@ -142,14 +142,14 @@ func TestRestoreCleansTempDirOnInterrupt(t *testing.T) {
 }
 
 // scratchEntries returns the vaultik blob-cache and snapshot-database
-// scratch entries currently present in dir.
+// scratch entries (restore's and deep verify's) currently present in dir.
 func scratchEntries(t *testing.T, dir string) []string {
 	t.Helper()
 
 	var matches []string
 
 	for _, pattern := range []string{
-		"vaultik-blobcache-*", "vaultik-restore-*",
+		"vaultik-blobcache-*", "vaultik-restore-*", "vaultik-verify-*",
 	} {
 		found, err := filepath.Glob(filepath.Join(dir, pattern))
 		require.NoError(t, err)
@@ -206,3 +206,119 @@ func TestRestoreSkipErrorsCancelDuringBlobDownload(t *testing.T) {
 	assert.NotContains(t, out.String(), srcPath,
 		"the cancel was reported as a failed file")
 }
+
+// stallingBlobStorer wraps a Storer so that every blob download hands
+// over the first half of the blob and then stalls, ignoring the context,
+// as a file:// blob on a hung USB stick or network share does. Only
+// closing the returned reader ends the stall.
+type stallingBlobStorer struct {
+	storage.Storer
+
+	once    sync.Once
+	stalled chan struct{}
+}
+
+func newStallingBlobStorer(inner storage.Storer) *stallingBlobStorer {
+	return &stallingBlobStorer{Storer: inner, stalled: make(chan struct{})}
+}
+
+func (s *stallingBlobStorer) Get(
+	ctx context.Context, key string,
+) (io.ReadCloser, error) {
+	rc, err := s.Storer.Get(ctx, key)
+	if err != nil || !strings.HasPrefix(key, "blobs/") {
+		return rc, err
+	}
+
+	blob, err := io.ReadAll(rc)
+	_ = rc.Close()
+
+	if err != nil {
+		return nil, err
+	}
+
+	// The writer is never closed, so once the first half has been read
+	// the next Read blocks until the reader is closed.
+	pr, pw := io.Pipe()
+
+	go func() {
+		_, _ = pw.Write(blob[:len(blob)/2])
+
+		s.once.Do(func() { close(s.stalled) })
+	}()
+
+	return pr, nil
+}
+
+// TestInterruptDuringStalledBlobReadCleansTempDir stops a restore and a
+// deep verify while a blob read is stalled on a source that ignores the
+// context. Stopping must end that read, so the operation unwinds and
+// removes its decrypted scratch files well within the shutdown timeout
+// (issue #325).
+//
+// Not parallel: it points TMPDIR at a private directory (via t.Setenv)
+// so it can assert on exactly the scratch files the operation created.
+func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
+	log.Initialize(log.Config{})
+
+	operations := map[string]func(v *Vaultik, snapshotID, targetDir string) error{
+		"restore": func(v *Vaultik, snapshotID, targetDir string) error {
+			return v.Restore(&RestoreOptions{
+				SnapshotID: snapshotID,
+				TargetDir:  targetDir,
+			})
+		},
+		"deep verify": func(v *Vaultik, snapshotID, _ string) error {
+			return v.RunDeepVerify(snapshotID, &VerifyOptions{Deep: true})
+		},
+	}
+
+	for name, op := range operations {
+		t.Run(name, func(t *testing.T) {
+			fs := afero.NewOsFs()
+			root := t.TempDir()
+
+			// Random content, so the blob stays large enough to stall
+			// part-way through its compressed, encrypted body.
+			cfg, storer, snapshotID, _ := backupOneFile(context.Background(),
+				t, fs, root, "a.bin", randomBytes(t, 256*1024), 0o644)
+
+			scratch := filepath.Join(root, "scratch")
+			require.NoError(t, fs.MkdirAll(scratch, 0o755))
+			t.Setenv("TMPDIR", scratch)
+
+			stalling := newStallingBlobStorer(storer)
+
+			ctx, cancel := context.WithCancel(context.Background())
+			defer cancel()
+
+			v := newRestoreVaultik(ctx, cfg, stalling, fs)
+			v.cancel = cancel
+
+			var opErr error
+
+			stop := v.StartOperation(func() {
+				opErr = op(v, snapshotID, filepath.Join(root, "restored"))
+			})
+
+			select {
+			case <-stalling.stalled:
+			case <-time.After(30 * time.Second):
+				t.Fatal("the operation never reached a blob read")
+			}
+
+			require.NotEmpty(t, scratchEntries(t, scratch),
+				"expected decrypted scratch files to exist mid-read")
+
+			stopCtx, stopCancel := context.WithTimeout(
+				context.Background(), 10*time.Second)
+			defer stopCancel()
+
+			require.True(t, stop(stopCtx),
+				"stop timed out; the stalled blob read was not interrupted")
+			require.ErrorIs(t, opErr, context.Canceled)
+			require.Empty(t, scratchEntries(t, scratch),
+				"decrypted scratch files remained after the interrupt")
+		})
+	}
+}

internal/vaultik/snapshot.go

@@ -209,7 +209,6 @@ type snapshotStats struct {
 	totalFiles         int
 	totalBytes         int64
 	totalChunks        int
-	newChunkSize       int64
 	totalBlobs         int
 	totalBytesSkipped  int64
 	totalFilesSkipped  int
@@ -342,7 +341,6 @@ func (v *Vaultik) scanAllDirectories(
 		stats.totalFiles += result.FilesScanned
 		stats.totalBytes += result.BytesScanned
 		stats.totalChunks += result.ChunksCreated
-		stats.newChunkSize += result.NewChunkSize
 		stats.totalBlobs += result.BlobsCreated
 		stats.totalFilesSkipped += result.FilesSkipped
 		stats.totalFilesFailed += result.FilesFailed
@@ -405,7 +403,6 @@ func (v *Vaultik) finalizeSnapshotMetadata(
 		BlobUncompressedSize: stats.blobUncompressedSize,
 		CompressionLevel:     v.Config.CompressionLevel,
 		UploadDurationMs:     stats.uploadDuration.Milliseconds(),
-		NewChunkSize:         stats.newChunkSize,
 	}
 
 	err = v.SnapshotManager.UpdateSnapshotStatsExtended(v.ctx, snapshotID, extStats)

internal/vaultik/snapshot_list_test.go

@@ -445,7 +445,6 @@ type listJSONRow struct {
 	RemoteKey      string `json:"remote_key"`
 	Timestamp      string `json:"timestamp"`
 	CompressedSize int64  `json:"compressed_size"`
-	NewChunkSize   int64  `json:"new_chunk_size"`
 	LocallyTracked bool   `json:"locally_tracked"`
 	RemotePresent  *bool  `json:"remote_present"`
 }