2026-10-05 04:24:46 +02:00
10 changed files with 710 additions and 589 deletions
@@ -0,0 +1,7 @@
 node_modules/
 yarn.lock
 # A byte-for-byte copy of the one in sneak/prompts.
 REPO_POLICIES.md
 vendor/
@@ -0,0 +1,4 @@
 {
    "tabWidth": 4,
    "proseWrap": "always"
 }
@@ -4,73 +4,68 @@ Last Updated 2026-01-08
 These rules MUST be followed at all times, it is very important.
-* Never use `git add -A` - add specific changes to a deliberate commit. A
+- Never use `git add -A` - add specific changes to a deliberate commit. A commit
-  commit should contain one change. After each change, make a commit with a
+  should contain one change. After each change, make a commit with a good
-  good one-line summary.
+  one-line summary.
-* NEVER modify the linter config without asking first.
+- NEVER modify the linter config without asking first.
-* NEVER modify tests to exclude special cases or otherwise get them to pass
+- NEVER modify tests to exclude special cases or otherwise get them to pass
-  without asking first. In almost all cases, the code should be changed,
+  without asking first. In almost all cases, the code should be changed, NOT the
-  NOT the tests. If you think the test needs to be changed, make your case
+  tests. If you think the test needs to be changed, make your case for that and
-  for that and ask for permission to proceed, then stop. You need explicit
+  ask for permission to proceed, then stop. You need explicit user approval to
-  user approval to modify existing tests. (You do not need user approval
+  modify existing tests. (You do not need user approval for writing NEW tests.)
  for writing NEW tests.)
-* When linting, assume the linter config is CORRECT, and that each item
+- When linting, assume the linter config is CORRECT, and that each item output
-  output by the linter is something that legitimately needs fixing in the
+  by the linter is something that legitimately needs fixing in the code.
  code.
-* When running tests, use `make test`.
+- When running tests, use `make test`.
-* Before commits, run `make check`. This runs `make lint` and `make test`
+- Before commits, run `make check`. This runs `make lint` and `make test` and
-  and `make check-fmt`. Any issues discovered MUST be resolved before
+  `make check-fmt`. Any issues discovered MUST be resolved before committing
-  committing unless explicitly told otherwise.
+  unless explicitly told otherwise.
-* When fixing a bug, write a failing test for the bug FIRST. Add
+- When fixing a bug, write a failing test for the bug FIRST. Add appropriate
-  appropriate logging to the test to ensure it is written correctly. Commit
+  logging to the test to ensure it is written correctly. Commit that. Then go
-  that. Then go about fixing the bug until the test passes (without
+  about fixing the bug until the test passes (without modifying the test
-  modifying the test further). Then commit that.
+  further). Then commit that.
-* When adding a new feature, do the same - implement a test first (TDD). It
+- When adding a new feature, do the same - implement a test first (TDD). It
-  doesn't have to be super complex. Commit the test, then commit the
+  doesn't have to be super complex. Commit the test, then commit the feature.
  feature.
-* When adding a new feature, use a feature branch. When the feature is
+- When adding a new feature, use a feature branch. When the feature is
-  completely finished and the code is up to standards (passes `make check`)
+  completely finished and the code is up to standards (passes `make check`) then
-  then and only then can the feature branch be merged into `main` and the
+  and only then can the feature branch be merged into `main` and the branch
-  branch deleted.
+  deleted.
-* Write godoc documentation comments for all exported types and functions as
+- Write godoc documentation comments for all exported types and functions as you
-  you go along.
+  go along.
-* ALWAYS be consistent in naming. If you name something one thing in one
+- ALWAYS be consistent in naming. If you name something one thing in one place,
-  place, name it the EXACT SAME THING in another place.
+  name it the EXACT SAME THING in another place.
-* Be descriptive and specific in naming. `wl` is bad;
+- Be descriptive and specific in naming. `wl` is bad; `SourceHostWhitelist` is
-  `SourceHostWhitelist` is good. `ConnsPerHost` is bad;
+  good. `ConnsPerHost` is bad; `MaxConnectionsPerHost` is good.
  `MaxConnectionsPerHost` is good.
-* This is not prototype or teaching code - this is designed for production.
+- This is not prototype or teaching code - this is designed for production. Any
-  Any security issues (such as denial of service) or other web
+  security issues (such as denial of service) or other web vulnerabilities are
-  vulnerabilities are P1 bugs and must be added to TODO.md at the top.
+  P1 bugs and must be added to TODO.md at the top.
-* As this is production code, no stubbing of implementations unless
+- As this is production code, no stubbing of implementations unless specifically
-  specifically instructed. We need working implementations.
+  instructed. We need working implementations.
-* NEVER silently fall back to a different setting when a user's parameter
+- NEVER silently fall back to a different setting when a user's parameter
-  explicitly specifies a value. If a user requests format=webp and WebP
+  explicitly specifies a value. If a user requests format=webp and WebP encoding
-  encoding is not supported, return an error - do NOT silently output PNG
+  is not supported, return an error - do NOT silently output PNG instead. If a
-  instead. If a user specifies fit=invalid and that fit mode doesn't exist,
+  user specifies fit=invalid and that fit mode doesn't exist, return an error -
-  return an error - do NOT silently default to "cover". Silent fallbacks
+  do NOT silently default to "cover". Silent fallbacks violate the principle of
-  violate the principle of least surprise and mask bugs. The only acceptable
+  least surprise and mask bugs. The only acceptable defaults are for OMITTED
-  defaults are for OMITTED parameters, never for INVALID explicit values.
+  parameters, never for INVALID explicit values.
-* Avoid vendoring deps unless specifically instructed to.  NEVER commit
+- Avoid vendoring deps unless specifically instructed to. NEVER commit the
-  the vendor directory, NEVER commit compiled binaries.  If these
+  vendor directory, NEVER commit compiled binaries. If these directories or
-  directories or files exist, add them to .gitignore (and commit the
+  files exist, add them to .gitignore (and commit the .gitignore) if they are
-  .gitignore) if they are not already in there.  Keep the entire git
+  not already in there. Keep the entire git repository (with history) small -
-  repository (with history) small - under 20MiB, unless you specifically
+  under 20MiB, unless you specifically must commit larger files (e.g. test
-  must commit larger files (e.g. test fixture example media files).  Only
+  fixture example media files). Only OUR source code and immediately supporting
-  OUR source code and immediately supporting files (such as test examples)
+  files (such as test examples) goes into the repo/history.
  goes into the repo/history.
@@ -1,10 +1,9 @@
 # pixa
-pixa is a GPL-3.0-licensed Go web server by
+pixa is a GPL-3.0-licensed Go web server by [@sneak](https://sneak.berlin) that
-[@sneak](https://sneak.berlin) that proxies images from upstream
+proxies images from upstream sources, optionally resizing or transforming them,
-sources, optionally resizing or transforming them, and serves the
+and serves the results. Both source and transformed images are cached to disk so
-results. Both source and transformed images are cached to disk so that
+that subsequent requests are served without origin fetches or additional
 subsequent requests are served without origin fetches or additional
 processing.
 ## Getting Started
@@ -27,12 +26,11 @@ make docker
 docker run -p 8080:8080 -e PIXA_SIGNING_KEY="$(openssl rand -base64 32)" pixa:latest
 ```
-A container takes its settings from environment variables (see
+A container takes its settings from environment variables (see Configuration
-Configuration below for the list). Only `PIXA_SIGNING_KEY` is required; if
+below for the list). Only `PIXA_SIGNING_KEY` is required; if it is unset the
-it is unset the container exits at startup naming the variable. Everything
+container exits at startup naming the variable. Everything else has a built-in
-else has a built-in default. A config file mounted at `/etc/pixa/config.yml`
+default. A config file mounted at `/etc/pixa/config.yml` is optional: it is read
-is optional: it is read when present, and an environment variable wins over
+when present, and an environment variable wins over the same setting in it.
 the same setting in it.
 ## Deployment
@@ -94,41 +92,40 @@ Outside Docker, pixa needs libvips (the image has 8.15) and libheif to run, as
 it uses libvips through CGO; building it also needs their development files,
 `pkg-config` and a C compiler. `script/bootstrap --cgo` installs all of these,
 as the `Dockerfile` does where it compiles pixa. Plain `script/bootstrap`, which
-`script/setup` and `script/cibuild` run, installs only git, make and Go: the
+`script/setup` and `script/cibuild` run, installs git, make and Go, and Node,
-checks compile pixa in Docker, so the host needs none of the C libraries. Docker
+Yarn and the prettier pinned in `yarn.lock` for formatting the markdown, but
-itself must already be installed.
+none of the C libraries: the checks compile pixa in Docker. Docker itself must
 already be installed.
 ## Running under upaas
 What the [upaas](https://git.eeqj.de/sneak/upaas) app for pixa needs:
 - **Port:** pixa listens on container port `8080`.
- **Volume:** container path `/var/lib/pixa`, where pixa keeps its
+- **Volume:** container path `/var/lib/pixa`, where pixa keeps its database and
-  database and cache. Creating the host directory when it is missing is
+  cache. Creating the host directory when it is missing is upaas's job, tracked
-  upaas's job, tracked in https://git.eeqj.de/sneak/upaas/issues/235.
+  in https://git.eeqj.de/sneak/upaas/issues/235.
 - **Environment variables:**
-    - `PIXA_SIGNING_KEY` (required): secret for signed and encrypted URLs
+    - `PIXA_SIGNING_KEY` (required): secret for signed and encrypted URLs and
-      and login, 32+ characters, for example from
+      login, 32+ characters, for example from `openssl rand -base64 32`
      `openssl rand -base64 32`
    - `PIXA_ALLOWLIST_HOSTS`: upstream hosts served without a signature,
      comma-separated
    - `PIXA_CACHE_MAX_BYTES`: disk cache limit in bytes; `0` disables it;
      default 75% of (free space + what the cache holds)
    - the rest are in the table under Configuration below
 - **Health check:** the image's `HEALTHCHECK` requests
-  `/.well-known/healthcheck.json`. upaas reads the container's health 60
+  `/.well-known/healthcheck.json`. upaas reads the container's health 60 seconds
-  seconds after a deploy and marks the deploy failed unless it is
+  after a deploy and marks the deploy failed unless it is `healthy`. The probe
-  `healthy`. The probe uses the port from `PORT` (default `8080`), so a
+  uses the port from `PORT` (default `8080`), so a port changed only in a
-  port changed only in a mounted config file is not seen by it: change
+  mounted config file is not seen by it: change the port with `PORT`.
  the port with `PORT`.
 ## Rationale
-Image-heavy web applications need a fast, caching reverse proxy that
+Image-heavy web applications need a fast, caching reverse proxy that can resize
-can resize and transcode images on the fly. pixa fills that role as a
+and transcode images on the fly. pixa fills that role as a single,
-single, self-contained binary with no external runtime dependencies
+self-contained binary with no external runtime dependencies beyond libvips. It
-beyond libvips. It supports HMAC-SHA256 signed URLs with expiration to
+supports HMAC-SHA256 signed URLs with expiration to prevent abuse, and
-prevent abuse, and allowlisted source hosts for open access.
+allowlisted source hosts for open access.
 ## Design
@@ -137,8 +134,8 @@ prevent abuse, and allowlisted source hosts for open access.
 - **Source content**:
  `<state_dir>/cache/sources/<ab>/<cd>/<sha256 of source content>`
 - **Source metadata**:
-  `<state_dir>/cache/metadata/<hostname>/<sha256 of path and query>.json`
+  `<state_dir>/cache/metadata/<hostname>/<sha256 of path and query>.json` (host,
-  (host, path and query, content hash, upstream status and headers, fetch time)
+  path and query, content hash, upstream status and headers, fetch time)
 - **Database**: `<state_dir>/state.sqlite3` (SQLite)
 - **Transformed images**:
  `<state_dir>/cache/variants/<ab>/<cd>/<sha256 of host, path, query, size, format, quality and fit>`,
@@ -147,8 +144,8 @@ prevent abuse, and allowlisted source hosts for open access.
 `<ab>` and `<cd>` are the first and second pairs of characters of the file's
 name.
-Multiple source paths may reference the same content blob; the
+Multiple source paths may reference the same content blob; the database tracks
-database tracks references rather than using filesystem refcounting.
+references rather than using filesystem refcounting.
 pixa's target is 1-5k r/s, which has not been measured at that rate (see Load
 Test). Toward it, pixa keeps in memory the content types of the 10,000
@@ -163,8 +160,8 @@ answers any method as it answers `GET`. A browser's CORS preflight request
 (`OPTIONS` with `Origin` and `Access-Control-Request-Method` headers) to any
 path under `/v1/` answers 200, in maintenance mode too.
- `GET /` — the login page, or the URL generator page with a login session
+- `GET /` — the login page, or the URL generator page with a login session (see
-  (see Encrypted URLs). Needs: nothing. Answers: 200.
+  Encrypted URLs). Needs: nothing. Answers: 200.
 - `POST /` — log in with the signing key typed into the login page. Needs: the
  login page's form (below). Answers: 303 to `/` with a login session cookie
  that lasts 30 days for the right key; 200 with the login page and an error for
@@ -197,11 +194,10 @@ path under `/v1/` answers 200, in maintenance mode too.
 - `GET /robots.txt` — asks every crawler to stay away (`Disallow: /`). Needs:
  nothing. Answers: 200.
 - `GET /.well-known/healthcheck.json` — JSON with `status` (`ok`), `now`,
-  `uptime_seconds`, `uptime_human`, `version`, `appname` and
+  `uptime_seconds`, `uptime_human`, `version`, `appname` and `maintenance_mode`.
-  `maintenance_mode`. Needs: nothing. Answers: 200, always.
+  Needs: nothing. Answers: 200, always.
- `GET /static/<file>` — the stylesheet and script the login and generator
+- `GET /static/<file>` — the stylesheet and script the login and generator pages
-  pages load. Needs: nothing. Answers: 200, or 404 for a file that does not
+  load. Needs: nothing. Answers: 200, or 404 for a file that does not exist.
  exist.
 - `GET /metrics` — Prometheus metrics (see Architecture). Needs: HTTP basic
  authentication with `metrics.username` and `metrics.password`. Answers: 200;
  401 without them; 404 when they are not set, as the route then does not exist.
@@ -225,9 +221,9 @@ HTTP is for development on the browser's own machine: the login session cookie
 is always marked `Secure`, and over plain HTTP a browser keeps such a cookie
 only for its own machine (`localhost`), if at all. A form is also refused with
 403 when the page's host is not the `Host` header pixa receives, so a reverse
-proxy in front of pixa must pass that header on unchanged. A form body over
+proxy in front of pixa must pass that header on unchanged. A form body over 1
-1 MiB is refused with 413. The image routes answer the errors listed for them
+MiB is refused with 413. The image routes answer the errors listed for them with
-with JSON holding `error`, `status` and `timestamp`.
+JSON holding `error`, `status` and `timestamp`.
 An image URL has this form:
@@ -239,8 +235,8 @@ Images are only fetched from origins using TLS with valid certificates, unless
 `allow_http` is set: then pixa fetches every image over plain HTTP, which is for
 testing only.
-A request whose query string cannot be decoded, or gives any parameter more
+A request whose query string cannot be decoded, or gives any parameter more than
-than once, is refused with 400.
+once, is refused with 400.
 - `<format>`: one of `orig` (or `original`), `jpeg` (or `jpg`), `png`, `webp`,
  `avif`, `gif`
@@ -248,39 +244,37 @@ than once, is refused with 400.
 - `sig` and `exp`: the signature and its expiry, needed unless the host is
  allowlisted (see Signature Specification)
 - `q` and `fit`: the output quality and how the image is fitted to `<size>`,
-  both optional (values under Signature Specification). Both are part of what
+  both optional (values under Signature Specification). Both are part of what is
-  is cached, so each value of either is a separate cached image.
+  cached, so each value of either is a separate cached image.
 An image is served with `Cache-Control: public, max-age=<seconds>, immutable`.
-When the URL has an expiry (an `exp`, or the TTL of an encrypted URL),
+When the URL has an expiry (an `exp`, or the TTL of an encrypted URL), `max-age`
-`max-age` is the whole seconds left until then, at most one year, so no browser
+is the whole seconds left until then, at most one year, so no browser or proxy
-or proxy cache keeps the image after pixa would refuse the URL. A URL with no
+cache keeps the image after pixa would refuse the URL. A URL with no expiry gets
-expiry gets one year. `immutable` only stops a client revalidating while its
+one year. `immutable` only stops a client revalidating while its copy is fresh.
 copy is fresh.
-When several requests for the same image, size, format, quality and fit miss
+When several requests for the same image, size, format, quality and fit miss the
-the cache at once, they share one upstream fetch (or one read of the cached
+cache at once, they share one upstream fetch (or one read of the cached source)
-source) and one transcode: the first request does the work, and the others wait
+and one transcode: the first request does the work, and the others wait for its
-for its image or its error, holding no upstream connection or processing slot
+image or its error, holding no upstream connection or processing slot of their
-of their own. A waiting request stops waiting when its own client goes away.
+own. A waiting request stops waiting when its own client goes away. The work
-The work goes on for the others even if the first request's client goes away,
+goes on for the others even if the first request's client goes away, until that
-until that request's `downstream_timeout` ends. The shared fetch sends the first
+request's `downstream_timeout` ends. The shared fetch sends the first request's
-request's ID upstream, and the lines logged for the fetch and the transcode
+ID upstream, and the lines logged for the fetch and the transcode carry that ID.
 carry that ID.
 The login form (`POST /`) is limited to 5 attempts per minute per client
 address, counting an IPv6 client by its /64; an attempt over the limit is
 refused with 429 and a `Retry-After` header. Behind a reverse proxy the client
 address comes from `X-Forwarded-For` only when the address pixa sees for
 requests that come through the proxy is in `trusted_proxies`; otherwise all
-users behind the proxy are counted as one client. That address is not always
+users behind the proxy are counted as one client. That address is not always the
-the proxy's own: a proxy on the Docker host that connects to pixa over
+proxy's own: a proxy on the Docker host that connects to pixa over `127.0.0.1`
-`127.0.0.1` is seen as the gateway of the container's Docker network, such as
+is seen as the gateway of the container's Docker network, such as `172.17.0.1`
-`172.17.0.1` on the default bridge, and one that connects through another of the
+on the default bridge, and one that connects through another of the host's
-host's addresses is seen with that address. To be sure, read it as `remoteIP` in
+addresses is seen with that address. To be sure, read it as `remoteIP` in pixa's
-pixa's request log while it is not in `trusted_proxies` (see `trusted_proxies`
+request log while it is not in `trusted_proxies` (see `trusted_proxies` under
-under Configuration). With the default `trusted_proxies` (the RFC 1918 ranges),
+Configuration). With the default `trusted_proxies` (the RFC 1918 ranges), a
-a client with a private address can choose the address it is counted by through
+client with a private address can choose the address it is counted by through
 its own `X-Forwarded-For`, whether it connects directly or through the proxy,
 because its own address is trusted too. Setting `trusted_proxies` to only the
 address pixa sees for requests that come through the proxy closes this.
@@ -305,18 +299,18 @@ nor change what it asks for.
   with `http` instead while `debug` is on. The name after the token is ignored
   and only gives the URL a file extension, `jpg` for `orig`.
-The token holds the source's host, path and query and the size, format,
+The token holds the source's host, path and query and the size, format, quality,
-quality, fit and expiry, encrypted with a key derived from `signing_key`. The
+fit and expiry, encrypted with a key derived from `signing_key`. The source
-source URL's scheme is not kept: the image is fetched like any other (see
+URL's scheme is not kept: the image is fetched like any other (see Routes), and
-Routes), and the blocked networks still apply.
+the blocked networks still apply.
-How long the URL lasts is chosen on the page, from 1 minute to 1 year, or
+How long the URL lasts is chosen on the page, from 1 minute to 1 year, or never.
-never. The expiry is fixed in the token when the URL is made and cannot be
+The expiry is fixed in the token when the URL is made and cannot be changed or
-changed or revoked afterwards. Until then the image is served with a `max-age`
+revoked afterwards. Until then the image is served with a `max-age` that ends at
-that ends at the expiry (see Routes); after it the URL answers 410
+the expiry (see Routes); after it the URL answers 410 `URL has expired`. A URL
-`URL has expired`. A URL made to last forever stops working only when
+made to last forever stops working only when `signing_key` changes: changing it
-`signing_key` changes: changing it makes every encrypted URL already handed out
+makes every encrypted URL already handed out answer 400, and ends every login
-answer 400, and ends every login session.
+session.
 ### Image Metadata
@@ -335,16 +329,15 @@ turned off.
 ### Source Hosts
-Source hosts may be allowlisted in the configuration. Non-allowlisted
+Source hosts may be allowlisted in the configuration. Non-allowlisted hosts
-hosts require an HMAC-SHA256 signature.
+require an HMAC-SHA256 signature.
 #### Signature Specification
-Signatures use HMAC-SHA256 and include an expiration timestamp to
+Signatures use HMAC-SHA256 and include an expiration timestamp to prevent replay
-prevent replay attacks. Signatures are **exact match only**: every
+attacks. Signatures are **exact match only**: every component (host, path,
-component (host, path, query, dimensions, format, expiration, quality,
+query, dimensions, format, expiration, quality, fit) must match exactly what was
-fit) must match exactly what was signed. No suffix matching, wildcard
+signed. No suffix matching, wildcard matching, or partial matching is supported.
 matching, or partial matching is supported.
 **Signed data format** (colon-separated):
@@ -361,24 +354,24 @@ Where:
 - `height` — requested height in pixels, `0` for original
 - `format` — output format, one of those listed under Routes, with `original`
  signed as `orig` and `jpg` as `jpeg`
- `expiration` — the URL's `exp` query parameter, the Unix timestamp when
+- `expiration` — the URL's `exp` query parameter, the Unix timestamp when the
-  the signature expires; a request whose `exp` is not a whole number, an
+  signature expires; a request whose `exp` is not a whole number, an empty
-  empty `exp=` included, is refused with 400
+  `exp=` included, is refused with 400
- `quality` — the URL's `q` query parameter, a whole number from 1 to 100,
+- `quality` — the URL's `q` query parameter, a whole number from 1 to 100, or
-  or `85` when the URL has no `q`; a request whose `q` is anything else is
+  `85` when the URL has no `q`; a request whose `q` is anything else is refused
-  refused with 400
+  with 400
 - `fit` — the URL's `fit` query parameter (cover, contain, fill, inside,
  outside), or `cover` when the URL has no `fit`; a request whose `fit` is
  anything else, an empty `fit=` included, is refused with 400
-The URL's `sig` is the HMAC-SHA256 result in base64url (the URL-safe alphabet
+The URL's `sig` is the HMAC-SHA256 result in base64url (the URL-safe alphabet of
-of RFC 4648) with the trailing `=` padding kept, 44 characters in all. pixa
+RFC 4648) with the trailing `=` padding kept, 44 characters in all. pixa
 compares it exactly, so a signature encoded without padding, as Node's
 `base64url` and Go's `base64.RawURLEncoding` do, is refused with 401.
 **Example:** with the signing key `example-signing-key-for-documentation`,
-resize `https://cdn.example.com/photos/cat.jpg` to 800x600 WebP with
+resize `https://cdn.example.com/photos/cat.jpg` to 800x600 WebP with expiration
-expiration 1704067200, default quality and fit:
+1704067200, default quality and fit:
 1. Build input:
   `cdn.example.com:/photos/cat.jpg::800:600:webp:1704067200:85:cover`
@@ -406,29 +399,29 @@ or a `*.` wildcard, aborts startup.
 ### Configuration
-Every setting can be given as an environment variable, in a YAML config
+Every setting can be given as an environment variable, in a YAML config file
-file (`--config`), or both. A variable present in the environment wins over
+(`--config`), or both. A variable present in the environment wins over the file,
-the file, even when it is empty, and the file wins over the built-in
+even when it is empty, and the file wins over the built-in default. The one
-default. The one exception is a variable named in the file's `env:` section:
+exception is a variable named in the file's `env:` section: it is set while the
-it is set while the file loads, so it overrides both the environment the
+file loads, so it overrides both the environment the process was started with
-process was started with and the file's own key. A variable's value is
+and the file's own key. A variable's value is parsed as the same text in the
-parsed as the same text in the file would be. The three lists take
+file would be. The three lists take comma-separated entries, with the spaces
-comma-separated entries, with the spaces around each trimmed; an empty
+around each trimmed; an empty variable is an empty list. A value that does not
-variable is an empty list. A value that does not parse or is invalid aborts
+parse or is invalid aborts startup, naming the variable. A variable whose name
-startup, naming the variable. A variable whose name starts with `PIXA_` but
+starts with `PIXA_` but is not in the table below, such as a misspelled one or
-is not in the table below, such as a misspelled one or `PIXA_PORT`, aborts
+`PIXA_PORT`, aborts startup naming it, as an unknown config key does. The one
-startup naming it, as an unknown config key does. The one other accepted
+other accepted name is `PIXA_CONFIG_PATH`, the config file's path (like
-name is `PIXA_CONFIG_PATH`, the config file's path (like `--config`). The
+`--config`). The variables set by the file's `env:` section are checked the same
-variables set by the file's `env:` section are checked the same way.
+way.
 pixa reads at most one config file: the one given with `--config` (or `-c`),
 otherwise the one `PIXA_CONFIG_PATH` names, otherwise the first of these that
 pixa finds: `/etc/pixa/config.yml`, `/etc/pixa/config.yaml`,
-`~/.config/pixa/config.yml`, `~/.config/pixa/config.yaml`, then `config.yml`
+`~/.config/pixa/config.yml`, `~/.config/pixa/config.yaml`, then `config.yml` and
-and `config.yaml` in the working directory. A named file that does not exist,
+`config.yaml` in the working directory. A named file that does not exist, cannot
-cannot be read or does not parse aborts startup. Of the files pixa looks for on
+be read or does not parse aborts startup. Of the files pixa looks for on its
-its own, only one that does not exist is passed over, without a message. One
+own, only one that does not exist is passed over, without a message. One that
-that pixa cannot read or parse aborts startup, naming the file. So does one in a
+pixa cannot read or parse aborts startup, naming the file. So does one in a
 directory pixa may not enter, whether or not it is there, since pixa cannot
 tell. With no file, pixa uses the environment and the defaults.
@@ -463,11 +456,11 @@ Key settings in more detail:
  of the image routes, `/v1/image/` and `/v1/e/`, sent as the CORS
  `Access-Control-Allow-Origin` header; no other route sends it. `*`, the
  default, is any site; otherwise one `http` or `https` origin such as
-  `https://example.com`, whose host is a lowercase host name (letters,
+  `https://example.com`, whose host is a lowercase host name (letters, digits,
-  digits, hyphens and dots, with a letter in its last part) or an IP address
+  hyphens and dots, with a letter in its last part) or an IP address (IPv6 in
-  (IPv6 in brackets, in its shortest form), with an optional port 1-65535
+  brackets, in its shortest form), with an optional port 1-65535 that has no
-  that has no leading zero and is not the scheme's default. Any other value,
+  leading zero and is not the scheme's default. Any other value, including
-  including another scheme such as a browser extension's, aborts startup
+  another scheme such as a browser extension's, aborts startup
 - `allowlist_hosts` — list of allowed upstream hosts
 - `referer_blocklist` — list of hosts whose pages may not show pixa's images, to
  stop other sites hotlinking them. Entries are written and matched as for
@@ -476,40 +469,37 @@ Key settings in more detail:
  `/v1/e/` whose `Referer` header names a listed host is refused with 403 before
  its signature or token is checked and before the cache or the upstream host is
  used, so it fetches nothing, and it is refused even when the image is cached.
-  A request with no `Referer`, or one that does not parse as a URL
+  A request with no `Referer`, or one that does not parse as a URL with a host,
-  with a host, is served, as many clients send none. So this is easily got
+  is served, as many clients send none. So this is easily got around: a site
-  around: a site whose pages send no `Referer` (for example with
+  whose pages send no `Referer` (for example with
  `Referrer-Policy: no-referrer`) is not stopped. It does not apply to the login
  and generator pages. Default: empty
- `blocked_networks` — list of CIDR ranges to refuse for SSRF protection,
+- `blocked_networks` — list of CIDR ranges to refuse for SSRF protection, added
-  added to the always-enforced built-in ranges (loopback, private,
+  to the always-enforced built-in ranges (loopback, private, link-local, CGNAT,
-  link-local, CGNAT, benchmark, NAT64, and the like); an invalid CIDR
+  benchmark, NAT64, and the like); an invalid CIDR aborts startup
-  aborts startup
+- `trusted_proxies` — list of CIDR ranges of the reverse proxies in front of
- `trusted_proxies` — list of CIDR ranges of the reverse proxies in front
+  pixa. `X-Forwarded-For` is believed only when the direct peer falls inside one
-  of pixa. `X-Forwarded-For` is believed only when the direct peer falls
+  of these ranges; the logged and login-recorded client address is then the
-  inside one of these ranges; the logged and login-recorded client
+  rightmost forwarded entry that is not itself a trusted proxy. Otherwise the
-  address is then the rightmost forwarded entry that is not itself a
+  direct peer address is used and the header is ignored, so a client connecting
-  trusted proxy. Otherwise the direct peer address is used and the header
+  directly from an address outside these ranges cannot spoof its address. An
-  is ignored, so a client connecting directly from an address outside
+  omitted key defaults to the RFC 1918 private ranges (`10.0.0.0/8`,
-  these ranges cannot spoof its address.
+  `172.16.0.0/12`, `192.168.0.0/16`), since pixa is deployed behind a proxy on a
-  An omitted key defaults to the RFC 1918 private ranges (`10.0.0.0/8`,
+  private network; an explicitly empty list (`[]`) trusts no one, and an
-  `172.16.0.0/12`, `192.168.0.0/16`), since pixa is deployed behind a
+  explicit list replaces the default. An invalid CIDR aborts startup. Set this
-  proxy on a private network; an explicitly empty list (`[]`) trusts no
+  to the address pixa sees for requests that come through your proxy, such as
-  one, and an explicit list replaces the default. An invalid CIDR aborts
+  `172.17.0.1/32`, when the defaults do not cover it, or to trust nothing else
-  startup. Set this to the address pixa sees for requests that come through
+  (see the login limit under Routes). For a proxy on the Docker host that
-  your proxy, such as `172.17.0.1/32`, when the defaults do not cover it, or
+  connects to pixa over `127.0.0.1`, that address is the gateway of the
-  to trust nothing else (see the login limit under Routes). For a proxy on
+  container's Docker network (`172.17.0.1` on the default bridge), not the
-  the Docker host that connects to pixa over `127.0.0.1`, that address is the
+  proxy's own address; a proxy that connects through another of the host's
-  gateway of the container's Docker network (`172.17.0.1` on the default
+  addresses is seen with that address. To be sure which address it is, set this
-  bridge), not the proxy's own address; a proxy that connects through another of
+  to `[]` (or `PIXA_TRUSTED_PROXIES` to empty), send a request through the
-  the host's addresses is seen with that address. To be sure which address it
+  proxy, and read `remoteIP` in pixa's request log line for it
-  is, set this to `[]` (or `PIXA_TRUSTED_PROXIES` to empty), send a request
+- `upstream_fetch_timeout` — time allowed for one fetch from an upstream host,
-  through the proxy, and read `remoteIP` in pixa's request log line for it
+  as a duration such as `30s` (the default) or `2m`
- `upstream_fetch_timeout` — time allowed for one fetch from an upstream
+- `upstream_max_response_size` — largest upstream response accepted, in bytes;
-  host, as a duration such as `30s` (the default) or `2m`
+  default `52428800` (50 MiB). It also limits the image data pixa decodes
 - `upstream_max_response_size` — largest upstream response accepted, in
  bytes; default `52428800` (50 MiB). It also limits the image data pixa
  decodes
 - `downstream_timeout` — time allowed for answering one client request, as a
  duration; default `60s`. The upstream fetch counts toward it, and so do the
  waits for an upstream connection and for a processing slot (up to 10 seconds
@@ -521,11 +511,11 @@ Key settings in more detail:
  so a write that finds another in progress waits up to five seconds for it
  instead of failing. WAL mode comes only from the URL: keep
  `_pragma=journal_mode(WAL)` in one you set
- `cache_max_bytes` — disk cache size limit in bytes; `0` disables the
+- `cache_max_bytes` — disk cache size limit in bytes; `0` disables the disk
-  disk cache entirely; omitted defaults to 75% of the sum of the free space on
+  cache entirely; omitted defaults to 75% of the sum of the free space on the
-  the filesystem containing `<state_dir>/cache/` and the bytes of source and
+  filesystem containing `<state_dir>/cache/` and the bytes of source and
-  transformed images the cache already holds, worked out at startup (minimum
+  transformed images the cache already holds, worked out at startup (minimum 500
-  500 MiB)
+  MiB)
 - `upstream_connections` — the most connections to upstream hosts at once, all
  hosts together, on top of `upstream_connections_per_host`; default `64`. A
  fetch holds its connection until its image has been processed. A fetch that
@@ -540,10 +530,10 @@ Key settings in more detail:
 - `maintenance_mode` — while `true`, the image routes (`/v1/image/` and
  `/v1/e/`) answer every request for an image with 503, a `Retry-After` header
  and a JSON error body. The health check (`/.well-known/healthcheck.json`)
-  still answers 200 and reports `"maintenance_mode": true`. It stays 200
+  still answers 200 and reports `"maintenance_mode": true`. It stays 200 because
-  because the image's Docker `HEALTHCHECK` requests it: a 503 there would make
+  the image's Docker `HEALTHCHECK` requests it: a 503 there would make the
-  the container unhealthy, and upaas marks a deploy failed when its container
+  container unhealthy, and upaas marks a deploy failed when its container is
-  is unhealthy. The login and URL generator pages and `/metrics` keep working
+  unhealthy. The login and URL generator pages and `/metrics` keep working
 See `configs/config.example.yml` for all options with defaults.
@@ -565,21 +555,23 @@ See `configs/config.example.yml` for all options with defaults.
 This repository adheres to the
 [Scripts to Rule Them All](https://github.com/github/scripts-to-rule-them-all)
 standard: normalized scripts in `script/` are the entrypoints for the
-development workflow, and the Makefile targets are thin shims that call
+development workflow, and the Makefile targets are thin shims that call them. We
-them. We provide:
+provide:
- `script/bootstrap` — install git, make and Go and download the Go modules
+- `script/bootstrap` — install git, make, Go, Node, Yarn and prettier and
-  (idempotent); with `--cgo`, also the C compiler and the libvips and libheif
+  download the Go modules (idempotent); with `--cgo`, the C compiler and the
-  libraries that compiling pixa needs
+  libvips and libheif libraries that compiling pixa needs instead of Node, Yarn
- `script/setup` — make a fresh clone ready for development
+  and prettier
-  (bootstrap, then install-precommit)
+- `script/setup` — make a fresh clone ready for development (bootstrap, then
  install-precommit)
 - `script/projectname` — output the project name ("pixa")
 - `script/test` — run the test suite: build the `test` phase of the
  `Dockerfile`, tagged `pixa-test`
 - `script/lint` — run golangci-lint: build the `lint` phase of the `Dockerfile`,
  tagged `pixa-lint`; the linter never runs on the host
- `script/fmt` — format all code (writes)
+- `script/fmt` — format the Go code with gofmt and the markdown with prettier
- `script/fmt-check` — check formatting (read-only), on the host
+  (writes)
 - `script/fmt-check` — check the same formatting (read-only), on the host
 - `script/check` — run test, lint, and fmt-check
 - `script/docker` — build the Docker image tagged via `script/projectname`, with
  the version from `git describe`; the image's build stage depends on the `lint`
@@ -591,14 +583,18 @@ them. We provide:
  then `script/check`, then build the image as `script/docker` does
 - `script/precommit` — pre-commit checks (`go mod tidy` guard, then
  `script/check`)
- `script/install-precommit` — install the git pre-commit hook that
+- `script/install-precommit` — install the git pre-commit hook that runs
-  runs `script/precommit`
+  `script/precommit`
 Every `docker build` in these scripts passes `--no-cache`, so the lint and test
 phases run on every build instead of coming from the build cache.
 `script/check`, `script/cibuild`, `script/docker`, `script/lint`, `script/test`,
 `script/setup` and `script/install-precommit` are the standard copies from
-`sneak/prompts`, kept identical to them.
+`sneak/prompts`, kept identical to them. `script/fmt` and `script/fmt-check` are
 the standard copies with pixa's `gofmt` step kept before prettier. prettier
 formats the markdown only: not the HTML templates, as it cannot parse a Go
 template action inside a tag, and not `REPO_POLICIES.md` (see
 `.prettierignore`), a copy of the one in `sneak/prompts`.
 ## Load Test
@@ -1,28 +1,27 @@
 # Workflow
-* branch per issue from `next`
+- branch per issue from `next`
-* do the work in Next Step
+- do the work in Next Step
-* move Next Step to the top of Completed Steps
+- move Next Step to the top of Completed Steps
-* `TODO.md` merges with git's union merge (`.gitattributes`), which never
+- `TODO.md` merges with git's union merge (`.gitattributes`), which never
  reports a conflict: read the merged entries after every merge or rebase
-* move the top item of Future Steps into Next Step
+- move the top item of Future Steps into Next Step
-* commit (`TODO.md` changes in the same commit as the work)
+- commit (`TODO.md` changes in the same commit as the work)
-* open a PR based on `next`
+- open a PR based on `next`
-* an independent reviewer who did not write the change gates it
+- an independent reviewer who did not write the change gates it
-* the manager squash-merges the PR into `next` once review passes
+- the manager squash-merges the PR into `next` once review passes
-* `next` stays green and mergeable to `main` at any time; only the owner
+- `next` stays green and mergeable to `main` at any time; only the owner merges
-  merges `next` into `main`, via the single milestone PR
+  `next` into `main`, via the single milestone PR
-* push
+- push
 # Status
-pre-1.0. No git tags exist. The `1.0.0` milestone is in progress; work
+pre-1.0. No git tags exist. The `1.0.0` milestone is in progress; work lands on
-lands on `next`, and `main` receives only the milestone PR that the
+`next`, and `main` receives only the milestone PR that the owner merges. `next`
-owner merges. `next` is at the canonical `golangci-lint` v2.12.2 config
+is at the canonical `golangci-lint` v2.12.2 config and is green. Recent work
-and is green. Recent work extracted the internal/magic,
+extracted the internal/magic, internal/allowlist, internal/httpfetcher, and
-internal/allowlist, internal/httpfetcher, and internal/signature
+internal/signature packages. The gosec findings from the 2026-07-06 survey are
-packages. The gosec findings from the 2026-07-06 survey are resolved.
+resolved. The disk cache is now size-bounded with LRU eviction
 The disk cache is now size-bounded with LRU eviction
 (`cache_max_bytes`), closing the unbounded disk growth DoS vector.
 # Next Step
@@ -31,6 +30,16 @@ P2: security: per-IP rate limiting on the image routes
 # Completed Steps
 - 2026-10-05 the markdown is formatted with prettier (closes #100): `script/fmt`
  and `script/fmt-check` run prettier 3.8.1, pinned in `package.json` and
  `yarn.lock`, on `**/*.md` after `gofmt`, with four-space tabs and
  `proseWrap: always` as `.prettierrc` says; `.prettierignore` keeps it off
  `REPO_POLICIES.md`, the copy from `sneak/prompts`, and `vendor/`. Plain
  `script/bootstrap` installs Node and Yarn as the one in `sneak/prompts` does
  and then prettier; `script/bootstrap --cgo` does not, as the `Dockerfile`
  stages that run it format nothing. The HTML templates stay unformatted:
  prettier cannot parse a Go template action inside a tag. The markdown was
  reflowed in a commit of its own.
 - 2026-10-05 lint and tests run as the `lint` and `test` phases of the
  `Dockerfile`, built with `--no-cache` (closes #202): `script/check`,
  `script/cibuild`, `script/docker`, `script/lint`, `script/test`,
@@ -103,13 +112,12 @@ P2: security: per-IP rate limiting on the image routes
  (the workflow's `script/docker-smoke` step),
  https://git.eeqj.de/sneak/pixa/issues/204 (`.claude/` in `.gitignore`),
  https://git.eeqj.de/sneak/pixa/issues/205 (`.dockerignore` patterns at every
-  depth), https://git.eeqj.de/sneak/pixa/issues/206 (a thin
+  depth), https://git.eeqj.de/sneak/pixa/issues/206 (a thin `cmd/pixad/main.go`)
-  `cmd/pixad/main.go`) and https://git.eeqj.de/sneak/pixa/issues/208
+  and https://git.eeqj.de/sneak/pixa/issues/208 (`fetch-depth: 0` on the CI
-  (`fetch-depth: 0` on the CI checkout, so the build sees the tags). Its rule
+  checkout, so the build sees the tags). Its rule that no build stage runs
-  that no build stage runs `git describe` is not followed: pixa takes the
+  `git describe` is not followed: pixa takes the version from the `.git` in the
-  version from the `.git` in the build context, per
+  build context, per https://git.eeqj.de/sneak/pixa/issues/166, as the copy on
-  https://git.eeqj.de/sneak/pixa/issues/166, as the copy on `sneak/prompts`
+  `sneak/prompts` `next` already says.
  `next` already says.
 - 2026-10-04 an integration test of the image proxy flow (closes #80):
  `TestImageProxyFlow` in `internal/server` starts the database, handlers and
  middleware from the constructors `pixad` uses, with a fresh state directory,
@@ -125,13 +133,12 @@ P2: security: per-IP rate limiting on the image routes
  `httpfetcher.Config.DialContext` connects in place of the dialer that refuses
  internal addresses, the URL and redirect checks still running, and
  `handlers.Params.Fetcher` replaces the fetcher the handlers build.
- 2026-10-04 a URL made on the generator page with a `ttl` is tested to
+- 2026-10-04 a URL made on the generator page with a `ttl` is tested to expire
-  expire (closes #199): a new test in `internal/handlers` makes a URL on the
+  (closes #199): a new test in `internal/handlers` makes a URL on the generator
-  generator page with a `ttl` of one second, checks that `/v1/e/` serves it at
+  page with a `ttl` of one second, checks that `/v1/e/` serves it at once, waits
-  once, waits two seconds and checks that it then answers 410. The test waits
+  two seconds and checks that it then answers 410. The test waits for real, as
-  for real, as pixa reads the clock directly when it makes and checks a URL; it
+  pixa reads the clock directly when it makes and checks a URL; it waits two
-  waits two seconds because the time a URL expires is kept in whole seconds.
+  seconds because the time a URL expires is kept in whole seconds. Test only.
  Test only.
 - 2026-10-04 referer blocklist (closes #90): `referer_blocklist`
  (`PIXA_REFERER_BLOCKLIST`) lists hosts, written and matched as for
  `allowlist_hosts` with the same matcher; an entry of either list that is
@@ -149,30 +156,29 @@ P2: security: per-IP rate limiting on the image routes
  `README.md`, the comments in `internal/config/config.go` and the startup error
  for the placeholder signing key name the new path; `scripts/manual-test.sh`
  and its directory are deleted, as the handler tests in `internal/handlers`
-  cover every check it made except two: fetching a real image from the
+  cover every check it made except two: fetching a real image from the internet,
-  internet, and a URL made on the generator page with a `ttl` answering 410 once
+  and a URL made on the generator page with a `ttl` answering 410 once the `ttl`
-  the `ttl` has passed (https://git.eeqj.de/sneak/pixa/issues/199);
+  has passed (https://git.eeqj.de/sneak/pixa/issues/199); `CONVENTIONS.md` is
-  `CONVENTIONS.md` is deleted, as `REPO_POLICIES.md` links the canonical Go HTTP
+  deleted, as `REPO_POLICIES.md` links the canonical Go HTTP server conventions.
  server conventions.
 - 2026-10-04 SQLite writes no longer fail with "database is locked" (closes
  #198): pixa adds `_pragma=busy_timeout(5000)` to every `db_url`, so a write
  that finds another in progress on another connection waits up to five seconds
  for it, and the default `db_url` turns on WAL mode with
  `_pragma=journal_mode(WAL)`. The old default's `_journal_mode=WAL` is not a
  parameter the driver reads, so the database was never in WAL mode.
- 2026-10-04 `TestPeriodicReconciliationAdoptsFileThatAppearsAfterStartup`
+- 2026-10-04 `TestPeriodicReconciliationAdoptsFileThatAppearsAfterStartup` only
-  only passes through a periodic pass (closes #189): it slept for three
+  passes through a periodic pass (closes #189): it slept for three eviction
-  eviction intervals before writing its file, and a startup pass still running
+  intervals before writing its file, and a startup pass still running then could
-  then could adopt the file itself. It now holds the test database's only
+  adopt the file itself. It now holds the test database's only connection until
-  connection until the startup pass waits for it after walking the empty
+  the startup pass waits for it after walking the empty variant directory,
-  variant directory, writes the file and lets the connection go, as
+  writes the file and lets the connection go, as
  `TestEvictionRunsOnPeriodicSchedule` does, so only a periodic reconciliation
  pass can adopt the file. Test only.
 - 2026-10-04 logging in, logging out, the URL generator and `/v1/e/` have
-  handler tests (closes #77): new tests in `internal/handlers`, with no
+  handler tests (closes #77): new tests in `internal/handlers`, with no network,
-  network, check that `GET /` without a login session shows the login form; a
+  check that `GET /` without a login session shows the login form; a wrong key
-  wrong key shows it again with an error and sets no session cookie; the right
+  shows it again with an error and sets no session cookie; the right key answers
-  key answers 303 to `/` with a session cookie marked `Secure`, `HttpOnly` and
+  303 to `/` with a session cookie marked `Secure`, `HttpOnly` and
  `SameSite=Strict`, with which `GET /` shows the generator page; `GET /logout`
  answers 303 to `/` with an empty session cookie sent with `Max-Age=0`;
  `POST /generate` without a login session answers 303 to `/`; `/v1/e/` serves
@@ -182,11 +188,11 @@ P2: security: per-IP rate limiting on the image routes
 - 2026-10-04 `TODO.md` merges with git's union merge (closes #190): a root
  `.gitattributes`, copied from `sneak/prompts`, marks it `merge=union`, so two
  branches that each add an entry at the top of Completed Steps merge without a
-  conflict and keep both entries. Git now never reports a conflict in
+  conflict and keep both entries. Git now never reports a conflict in `TODO.md`:
-  `TODO.md`: a real one keeps both versions of the lines, and two entries that
+  a real one keeps both versions of the lines, and two entries that share an
-  share an identical line can end up one inside the other, which a rebase can
+  identical line can end up one inside the other, which a rebase can do to an
-  do to an entry already on `next`. The Workflow above says to read the merged
+  entry already on `next`. The Workflow above says to read the merged entries
-  entries after every merge or rebase.
+  after every merge or rebase.
 - 2026-10-04 the default `cache_max_bytes` no longer shrinks as the cache fills
  (closes #184): for an omitted key, the cache works out the limit when it
  opens, after the database is open, as 75% of the sum of the free space on the
@@ -210,10 +216,10 @@ P2: security: per-IP rate limiting on the image routes
  that pixa may not enter, aborts startup naming the file, as a file that does
  not parse already did.
 - 2026-10-04 `.golangci.yml` re-vendored from the canonical copy (closes #57):
-  the deprecated `gomodguard` is switched off, so lint runs print no
+  the deprecated `gomodguard` is switched off, so lint runs print no deprecation
-  deprecation warning; its successor `gomodguard_v2` runs with the shared
+  warning; its successor `gomodguard_v2` runs with the shared module block list,
-  module block list, and `depguard` keeps `net/http/httptest` out of files that
+  and `depguard` keeps `net/http/httptest` out of files that are not tests. The
-  are not tests. The tree needed no code changes.
+  tree needed no code changes.
 - 2026-10-04 the Content-Security-Policy allows no inline script or style
  (closes #125): `script-src` and `style-src` are `'self'` only. The generator
  page's two inline `onclick` handlers moved into
@@ -232,30 +238,30 @@ P2: security: per-IP rate limiting on the image routes
  counts, the health check for a load balancer, what a stop does and its exit
  codes, and what running outside Docker needs; `configs/Caddyfile` is the
  example, checked with `caddy validate`.
- 2026-10-04 the metrics basic auth, CORS preflight, request logging and
+- 2026-10-04 the metrics basic auth, CORS preflight, request logging and metrics
-  metrics recording have tests (closes #79): `MetricsAuth` on its own answers
+  recording have tests (closes #79): `MetricsAuth` on its own answers 401 with a
-  401 with a challenge without credentials or with a wrong username or password
+  challenge without credentials or with a wrong username or password and lets
-  and lets the configured ones through; a preflight request gets `*` for any
+  the configured ones through; a preflight request gets `*` for any origin when
-  origin when `access_control_allow_origin` is `*` and no
+  `access_control_allow_origin` is `*` and no `Access-Control-Allow-Origin` from
-  `Access-Control-Allow-Origin` from another origin than the configured one; a
+  another origin than the configured one; a `POST /` carrying the signing key
-  `POST /` carrying the signing key leaves no trace of it in the request log
+  leaves no trace of it in the request log line, and the login handler's own log
-  line, and the login handler's own log lines leave out the submitted key; the
+  lines leave out the submitted key; the metrics middleware on its own records a
-  metrics middleware on its own records a request it served, and the router
+  request it served, and the router records nothing while no metrics username is
-  records nothing while no metrics username is set. Not tested: that the router
+  set. Not tested: that the router puts the basic auth in front of `/metrics`
-  puts the basic auth in front of `/metrics` and records requests when a
+  and records requests when a metrics username is set. Only one test per package
-  metrics username is set. Only one test per package can set up `/metrics`, and
+  can set up `/metrics`, and in `internal/server` that is
-  in `internal/server` that is `TestMaintenanceModeKeepsOtherRoutes`, which
+  `TestMaintenanceModeKeepsOtherRoutes`, which needs the owner's approval to
-  needs the owner's approval to change; #180 holds it. Tests only; the basic
+  change; #180 holds it. Tests only; the basic auth library already compares the
-  auth library already compares the password in constant time.
+  password in constant time.
 - 2026-10-04 the image route's signature check and error answers are tested
  (closes #76): new tests in `internal/handlers`, with no network, check the
  status and JSON error body for a missing, wrong, unpadded, upper-case or
-  expired signature on a host not on the allowlist, or a valid one sent for
+  expired signature on a host not on the allowlist, or a valid one sent for its
-  its parent domain, a sibling host, a subdomain or the host with another
+  parent domain, a sibling host, a subdomain or the host with another domain
-  domain appended (401), an unparseable path (400), `localhost` as the
+  appended (401), an unparseable path (400), `localhost` as the upstream host
-  upstream host (403) and an upstream error (502); that an allowlisted host is
+  (403) and an upstream error (502); that an allowlisted host is served without
-  served without a signature, another host only with a valid one; and the
+  a signature, another host only with a valid one; and the answers of
-  answers of `/robots.txt` and the health check. No code changes.
+  `/robots.txt` and the health check. No code changes.
 - 2026-10-04 request IDs returned and passed on, and `/v1/e/` revalidates
  (closes #84): pixa's own `RequestID` middleware, in place of chi's, gives each
  request an ID, its own `X-Request-ID` when that is at most 64 letters, digits,
@@ -272,26 +278,26 @@ P2: security: per-IP rate limiting on the image routes
  `Vary: Accept` is left to #88.
 - 2026-10-04 routes, encrypted URLs and config file documented (closes #75):
  "Routes" in `README.md` lists every route with its method, purpose, what it
-  needs and the status codes it answers with, and says `q` and `fit` are part
+  needs and the status codes it answers with, and says `q` and `fit` are part of
-  of what is cached; "Encrypted URLs" covers logging in, making one on the
+  what is cached; "Encrypted URLs" covers logging in, making one on the
  generator page, how long it lasts and the 410 once it has expired;
  "Configuration" gives the order in which pixa looks for its config file;
  `config.example.yml` lists `db_url` and `env` and gives every key's default;
  `scripts/manual-test.sh` is left to #97.
 - 2026-10-04 shutdown stops cache eviction in progress (closes #102):
  `StartEviction` runs the eviction goroutine with its own context, which
-  `StopEviction` cancels, so a pass in progress stops at its next database
+  `StopEviction` cancels, so a pass in progress stops at its next database call,
-  call, file, row or eviction candidate instead of running to completion, and
+  file, row or eviction candidate instead of running to completion, and no pass
-  no pass starts after it, so a stop logs at most one warning;
+  starts after it, so a stop logs at most one warning; `StopEviction` takes a
-  `StopEviction` takes a context and, when that context ends before the
+  context and, when that context ends before the goroutine exits, stops waiting
-  goroutine exits, stops waiting and returns its error; the handlers' stop hook
+  and returns its error; the handlers' stop hook passes fx's stop context, so an
-  passes fx's stop context, so an eviction still running when fx's stop
+  eviction still running when fx's stop deadline ends fails the stop and makes
-  deadline ends fails the stop and makes the exit code 1.
+  the exit code 1.
 - 2026-10-04 dead code in `internal/imgcache` is gone (closes #73): `Purge`,
  which only returned an error and which nothing called, is no longer part of
-  the `ImageCache` interface or `Service`; the `SignatureValidator`,
+  the `ImageCache` interface or `Service`; the `SignatureValidator`, `Allowlist`
-  `Allowlist` and `Storage` interfaces, which nothing implemented or used, are
+  and `Storage` interfaces, which nothing implemented or used, are deleted.
-  deleted. Nothing else changes.
+  Nothing else changes.
 - 2026-10-04 upstream host semaphores and variant `.meta` files no longer
  outlive their use (closes #87): the fetcher counts the fetches holding or
  waiting for a slot of each upstream host's semaphore and removes the host's
@@ -303,21 +309,20 @@ P2: security: per-IP rate limiting on the image routes
  cache directories pixa uses (`cache/sources`, `cache/metadata`,
  `cache/variants`) and how files are named in each, and the comments in
  `001_schema.sql` name the same paths; the routes and the signature section
-  list the same output formats, `jpg` and `original` included; the TLS
+  list the same output formats, `jpg` and `original` included; the TLS sentence
-  sentence names `allow_http` as its exception; "Metrics" says only generic
+  names `allow_http` as its exception; "Metrics" says only generic HTTP and Go
-  HTTP and Go runtime metrics exist, measured and served only when the metrics
+  runtime metrics exist, measured and served only when the metrics username and
-  username and password are set.
+  password are set.
- 2026-10-03 shutdown sets the exit code and waits for image processing
+- 2026-10-03 shutdown sets the exit code and waits for image processing (closes
-  (closes #86): fx alone handles SIGINT and SIGTERM, and the server's own
+  #86): fx alone handles SIGINT and SIGTERM, and the server's own signal handler
-  signal handler is gone; fx's `Run` in `cmd/pixad` exits with the shutdown's
+  is gone; fx's `Run` in `cmd/pixad` exits with the shutdown's code: 0 for a
-  code: 0 for a signal, 1 when the HTTP server cannot listen or the app fails
+  signal, 1 when the HTTP server cannot listen or the app fails to start or to
-  to start or to stop; the server's stop hook, which fx waits for, stops the
+  stop; the server's stop hook, which fx waits for, stops the HTTP server, waits
-  HTTP server, waits for the images still being processed, both within 5
+  for the images still being processed, both within 5 seconds, then flushes
-  seconds, then flushes Sentry; images still being processed after that are
+  Sentry; images still being processed after that are logged with their count
-  logged with their count and make the exit code 1; a Sentry DSN that cannot be
+  and make the exit code 1; a Sentry DSN that cannot be used fails startup, so
-  used fails startup, so the stop hooks of what had already started run,
+  the stop hooks of what had already started run, instead of exiting the process
-  instead of exiting the process from a goroutine; the eviction loop is left to
+  from a goroutine; the eviction loop is left to #102.
  #102.
 - 2026-10-03 every `script/cibuild` and `script/docker` run executes the checks
  (closes #101): the `Dockerfile` declares `CHECK_EPOCH` above `make fmt-check`
  and `make lint` in the lint stage and above `make test` in the build stage,
@@ -332,11 +337,11 @@ P2: security: per-IP rate limiting on the image routes
  upstream fetch or cached source read and one transcode through
  `golang.org/x/sync/singleflight`; the first request's processing ignores its
  cancellation but keeps its deadline, and the others wait for its image or
-  error holding no upstream connection or processing slot, and stop waiting
+  error holding no upstream connection or processing slot, and stop waiting when
-  when their own context ends; the request doing the processing waits for it
+  their own context ends; the request doing the processing waits for it even
-  even then, up to its deadline; a request whose context has already ended
+  then, up to its deadline; a request whose context has already ended starts
-  starts nothing; each request counts one miss, and the processing counts its
+  nothing; each request counts one miss, and the processing counts its fetch and
-  fetch and transcode once; a panic while processing is reported to Sentry when
+  transcode once; a panic while processing is reported to Sentry when
  `sentry_dsn` is set and becomes an error for every waiting request instead of
  stopping pixad; documented in `README.md`.
 - 2026-09-29 only the image routes send CORS headers (closes #98): the CORS
@@ -345,20 +350,20 @@ P2: security: per-IP rate limiting on the image routes
  still answers a preflight `OPTIONS` request; the login and URL generator
  pages, `/metrics` and the other routes send no `Access-Control-Allow-Origin`;
  documented in `README.md` and `config.example.yml`.
- 2026-10-02 a plain `docker build .` stamps the tag or short commit, not
+- 2026-10-02 a plain `docker build .` stamps the tag or short commit, not `dev`
-  `dev` (closes #166): `.dockerignore` lets `.git` into the build context,
+  (closes #166): `.dockerignore` lets `.git` into the build context, without
-  without `.git/config`; with no `VERSION` build argument the `Dockerfile`
+  `.git/config`; with no `VERSION` build argument the `Dockerfile` takes the
-  takes the version from `git describe --tags --always`, and fails the build if
+  version from `git describe --tags --always`, and fails the build if the
-  the context carries `.git` and no version comes out; `ARG VERSION` has no
+  context carries `.git` and no version comes out; `ARG VERSION` has no default;
-  default; pixad logs its version, with its name and architecture, as its first
+  pixad logs its version, with its name and architecture, as its first log line
-  log line at startup.
+  at startup.
- 2026-09-29 the container makes `/var/lib/pixa` usable by itself (closes
+- 2026-09-29 the container makes `/var/lib/pixa` usable by itself (closes #159):
-  #159): `deploy/docker-entrypoint.sh` creates the directory if it is missing,
+  `deploy/docker-entrypoint.sh` creates the directory if it is missing, gives
-  gives the directory and everything in it to `pixad` when the directory or one
+  the directory and everything in it to `pixad` when the directory or one of its
-  of its top-level entries belongs to another user or group, sets its mode to
+  top-level entries belongs to another user or group, sets its mode to `750`,
-  `750`, then runs the server as `pixad`; data left by an earlier run under
+  then runs the server as `pixad`; data left by an earlier run under another uid
-  another uid is taken over this way; "Running under upaas" in `README.md` no
+  is taken over this way; "Running under upaas" in `README.md` no longer tells
-  longer tells the operator to create or chown the host directory.
+  the operator to create or chown the host directory.
 - 2026-09-29 variant content types kept in memory (closes #70):
  `Cache.metaCache` holds the content types of up to 10,000 variants in an LRU
  (`github.com/hashicorp/golang-lru/v2`), filled by `StoreVariant` and by
@@ -397,8 +402,8 @@ P2: security: per-IP rate limiting on the image routes
  `ARG VERSION` sits just above the build, so a new version reruns neither
  `script/bootstrap` nor the tests.
 - 2026-09-29 migrations at the path `REPO_POLICIES.md` sets (closes #96): the
-  migration files moved, contents unchanged, from `internal/database/schema/`
+  migration files moved, contents unchanged, from `internal/database/schema/` to
-  to `internal/db/migrations/` as `000_migration.sql` and `001_schema.sql`; the
+  `internal/db/migrations/` as `000_migration.sql` and `001_schema.sql`; the
  `internal/db/migrations` package embeds them and `internal/database` reads
  them through its `FS()`; the `internal/database` package itself stays; the
  version still comes from the filename prefix, so a database that has recorded
@@ -413,8 +418,8 @@ P2: security: per-IP rate limiting on the image routes
  `=` padding kept, and gives the example's `sig` for a stated signing key.
 - 2026-09-29 fixed uid and gid for `pixad` (closes #151): the image creates the
  `pixad` group with gid 65532 and the `pixad` user with uid 65532, instead of
-  the first free uid 1000, so a bind-mounted `/var/lib/pixa` given to `pixad`
+  the first free uid 1000, so a bind-mounted `/var/lib/pixa` given to `pixad` is
-  is not owned on the host by a person's login account; the first-run step of
+  not owned on the host by a person's login account; the first-run step of
  "Running under upaas" in `README.md` names the uid and gid.
 - 2026-09-29 `max-age` never outlives an expiring URL (closes #63): both image
  routes build `Cache-Control` from the request's `Expires`, which an encrypted
@@ -423,29 +428,27 @@ P2: security: per-IP rate limiting on the image routes
  that is sooner, never negative; an allowlisted host's URL that has an `exp`
  follows it too; `immutable` stays, as freshness now ends at the expiry;
  documented in `README.md`.
- 2026-09-28 add the four settings `README.md` documented but pixa did not
+- 2026-09-28 add the four settings `README.md` documented but pixa did not have,
-  have, which aborted startup as unknown keys (closes #61):
+  which aborted startup as unknown keys (closes #61):
  `access_control_allow_origin` (default `*`, the CORS origin),
  `upstream_fetch_timeout` (default `30s`), `upstream_max_response_size`
-  (default 50 MiB) and `downstream_timeout` (default `60s`, both the
+  (default 50 MiB) and `downstream_timeout` (default `60s`, both the server's
-  server's write timeout and the per-request timeout); each has a
+  write timeout and the per-request timeout); each has a `PIXA_` variable;
-  `PIXA_` variable; durations are positive Go duration strings, the size a
+  durations are positive Go duration strings, the size a whole number of bytes
-  whole number of bytes up to 1 GiB, the origin `*` or one `http` or
+  up to 1 GiB, the origin `*` or one `http` or `https` origin as `README.md`
-  `https` origin as `README.md` describes it; an invalid value
+  describes it; an invalid value aborts startup naming the key and the value;
-  aborts startup naming the key and the value; documented in
+  documented in `config.example.yml` and `README.md`.
-  `config.example.yml` and `README.md`.
+- 2026-09-28 cache stats report real numbers (closes #56): `Cache.Stats` counts
- 2026-09-28 cache stats report real numbers (closes #56): `Cache.Stats`
+  the cached source images and processed variants (`source_content` plus
-  counts the cached source images and processed variants (`source_content`
+  `variant_content`) and takes their size from `Cache.UsageBytes`, instead of
-  plus `variant_content`) and takes their size from `Cache.UsageBytes`,
+  reading `request_cache` and `output_content`, which nothing writes; those two
-  instead of reading `request_cache` and `output_content`, which nothing
+  tables are left in the schema; a disabled disk cache reports no items and no
-  writes; those two tables are left in the schema; a disabled disk cache
+  size. A hit is counted even when the request context has ended. A miss is
-  reports no items and no size. A hit is counted even when the request
+  counted after it is served or fails, also when the request context has ended
-  context has ended. A miss is counted after it is served or fails, also
+  by then, with the bytes it read from upstream, so `upstream_fetch_count` and
-  when the request context has ended by then, with the bytes it read from
+  `upstream_fetch_bytes` move, including for an upstream body that fails partway
-  upstream, so `upstream_fetch_count` and `upstream_fetch_bytes` move,
+  or a fetched source that then fails the magic byte check; `transform_count`
-  including for an upstream body that fails partway or a fetched source
+  counts each image the image processor transcodes.
  that then fails the magic byte check; `transform_count` counts each image
  the image processor transcodes.
 - 2026-09-28 strip metadata from processed images (closes #82): every output is
  exported with govips' `StripMetadata`, so it carries no EXIF, XMP, IPTC or ICC
  profile; the image is first turned upright with `AutoRotate` (before sizes are
@@ -456,220 +459,201 @@ P2: security: per-IP rate limiting on the image routes
  attempts per minute per client address, and an attempt over the limit is
  refused with 429 and a `Retry-After` header; the address is the one
  `internal/clientip` resolves through `trusted_proxies`, an IPv6 client is
-  counted by its /64, and an IPv4-mapped address as the IPv4 address it
+  counted by its /64, and an IPv4-mapped address as the IPv4 address it carries;
-  carries; the limit is a `RateLimit` middleware in `internal/middleware` on
+  the limit is a `RateLimit` middleware in `internal/middleware` on
  `github.com/go-chi/httprate`, which the image routes can reuse; the library
  keeps counts for the current and the previous minute only; documented in
  `README.md`.
- 2026-09-28 refuse an unparseable `exp` on `/v1/image/` and log swallowed
+- 2026-09-28 refuse an unparseable `exp` on `/v1/image/` and log swallowed cache
-  cache errors (closes #72): an `exp` in the URL that is not a whole
+  errors (closes #72): an `exp` in the URL that is not a whole number, an empty
-  number, an empty `exp=` included, is a 400 naming `exp` and the value,
+  `exp=` included, is a 400 naming `exp` and the value, instead of being ignored
-  instead of being ignored and answered with 401 as if the URL had no
+  and answered with 401 as if the URL had no `exp`; only an `exp` missing from
-  `exp`; only an `exp` missing from the URL is unchanged; `README.md` says
+  the URL is unchanged; `README.md` says so where it documents `exp`. A failed
-  so where it documents `exp`. A failed variant `.meta` write, source
+  variant `.meta` write, source metadata JSON write, `Stats` count query, stats
-  metadata JSON write, `Stats` count query, stats counter update, negative
+  counter update, negative cache write or expired negative cache delete is now
-  cache write or expired negative cache delete is now logged at `warn`
+  logged at `warn` with the path or key and the error, and stays non-fatal.
-  with the path or key and the error, and stays non-fatal.
+- 2026-09-28 refuse an empty `fit` on `/v1/image/` (closes #139): a `fit` in the
- 2026-09-28 refuse an empty `fit` on `/v1/image/` (closes #139): a
+  URL with an empty value (`fit=`) is a 400 naming `fit`, instead of being
-  `fit` in the URL with an empty value (`fit=`) is a 400 naming `fit`,
+  served as `cover` and verified against a signature made for `cover`; only a
-  instead of being served as `cover` and verified against a signature
+  `fit` missing from the URL is still `cover`; any other value still goes
-  made for `cover`; only a `fit` missing from the URL is still `cover`;
+  through the existing fit-mode check; `README.md` says so where it documents
-  any other value still goes through the existing fit-mode check;
+  `fit`.
-  `README.md` says so where it documents `fit`.
+- 2026-09-28 refuse an invalid `q` on `/v1/image/` (closes #134): a `q` that is
- 2026-09-28 refuse an invalid `q` on `/v1/image/` (closes #134): a `q`
+  not a whole number from 1 to 100, an empty `q` included, is a 400 naming `q`
-  that is not a whole number from 1 to 100, an empty `q` included, is a
+  and the value, instead of being served at the default 85; the route reads `q`
-  400 naming `q` and the value, instead of being served at the default
+  with the generator's quality check (`parseFormInt` with `minQuality` and
-  85; the route reads `q` with the generator's quality check
+  `maxQuality`); only a `q` missing from the URL is still 85; a query string
-  (`parseFormInt` with `minQuality` and `maxQuality`); only a `q` missing
+  that cannot be decoded, such as `q=80%`, is a 400 showing it; any query
-  from the URL is still 85; a query string that cannot be decoded, such
+  parameter given more than once (`q`, `fit`, `sig`, `exp` alike) is a 400
-  as `q=80%`, is a 400 showing it; any query parameter given more than
+  naming it, so none is read from its first value only; `README.md` states the
-  once (`q`, `fit`, `sig`, `exp` alike) is a 400 naming it, so none is
+  range and both query-string rules.
-  read from its first value only; `README.md` states the range and both
+- 2026-09-28 unknown `PIXA_` environment variables abort startup (closes #133):
-  query-string rules.
+  a variable whose name starts with `PIXA_` but is neither a setting's variable
- 2026-09-28 unknown `PIXA_` environment variables abort startup (closes
+  nor `PIXA_CONFIG_PATH` aborts startup naming it, as an unknown config key
-  #133): a variable whose name starts with `PIXA_` but is neither a
+  does, and `PIXA_PORT` is named with a pointer to `PORT`; the check runs after
-  setting's variable nor `PIXA_CONFIG_PATH` aborts startup naming it, as
+  the config file loads, so the variables the file's `env:` section sets are
-  an unknown config key does, and `PIXA_PORT` is named with a pointer to
+  checked too; documented in `README.md`.
-  `PORT`; the check runs after the config file loads, so the variables
+- 2026-09-28 start on a fresh upaas volume (closes #129): the image starts as
-  the file's `env:` section sets are checked too; documented in
+  root only to give `/var/lib/pixa` to `pixad` when `pixad` does not own it
-  `README.md`.
+  (`deploy/docker-entrypoint.sh`), then runs the server as `pixad` through
- 2026-09-28 start on a fresh upaas volume (closes #129): the image
+  `su-exec`, so a root-owned host directory bind-mounted there no longer stops
-  starts as root only to give `/var/lib/pixa` to `pixad` when `pixad`
+  the container at startup; `README.md` gains a "Running under upaas" section.
-  does not own it (`deploy/docker-entrypoint.sh`), then runs the server
+- 2026-09-28 run all linting in Docker via `Dockerfile.lint` + `script/lint`
-  as `pixad` through `su-exec`, so a root-owned host directory
+  (closes #104): `make lint` calls `script/lint`, the only way the linter is
-  bind-mounted there no longer stops the container at startup;
+  run; inside a container (both Dockerfiles set `container=docker`) it runs
-  `README.md` gains a "Running under upaas" section.
+  `golangci-lint`, anywhere else it builds the hash-pinned `Dockerfile.lint`,
- 2026-09-28 run all linting in Docker via `Dockerfile.lint` +
+  whose last step runs `script/lint` again; the `Dockerfile` lint stage runs
-  `script/lint` (closes #104): `make lint` calls `script/lint`, the only
+  `make lint`; no host or nix-shell `golangci-lint` path remains
-  way the linter is run; inside a container (both Dockerfiles set
+  (`script/bootstrap` installs no linter); a per-run `CACHEBUST` build-arg keeps
-  `container=docker`) it runs `golangci-lint`, anywhere else it builds the
+  the lint step from being served from cache, and a tmpfs mount on that step
-  hash-pinned `Dockerfile.lint`, whose last step runs `script/lint` again;
+  keeps Go's and golangci-lint's caches out of its layer, so a run leaves no
-  the `Dockerfile` lint stage runs `make lint`; no host or nix-shell
+  large build cache behind; `golangci-lint config verify` stays out, as it
-  `golangci-lint` path remains (`script/bootstrap` installs no linter);
+  fetches its schema over an unpinned live HTTPS call
-  a per-run `CACHEBUST` build-arg keeps the lint step from being served
+- 2026-09-28 every setting as an environment variable (closes #128, also covers
-  from cache, and a tmpfs mount on that step keeps Go's and
+  #99): each config key can be set by `PIXA_` plus the key in upper case (`.`
-  golangci-lint's caches out of its layer, so a run leaves no large build
+  written as `_`), and the port by `PORT`; a variable present in the
-  cache behind; `golangci-lint config verify` stays out, as it fetches its
+  environment, even empty, wins over the config file, which wins over the
-  schema over an unpinned live HTTPS call
+  default; the typed getters read the variable first, so every existing check
- 2026-09-28 every setting as an environment variable (closes #128, also
+  applies to it and a bad value aborts startup naming the variable; lists are
-  covers #99): each config key can be set by `PIXA_` plus the key in upper
+  comma-separated, and an empty variable (or `""` in the file) is an empty list;
-  case (`.` written as `_`), and the port by `PORT`; a variable present in
+  the Docker image no longer bakes in `config.docker.yml` or passes `--config`,
-  the environment, even empty, wins over the config file, which wins over
+  and its `HEALTHCHECK` probes `PORT` (default `8080`); the config file is
-  the default; the typed getters read the variable first, so every existing
+  looked for under `/etc/pixa` and `~/.config/pixa` instead of the daemon name
-  check applies to it and a bad value aborts startup naming the variable;
+  `pixad`; documented in `README.md` and `config.example.yml`.
-  lists are comma-separated, and an empty variable (or `""` in the file) is
+- 2026-09-28 quality and fit in the URL signature (closes #60): the signed data
-  an empty list; the Docker image no longer bakes in `config.docker.yml` or
+  is now `host:path:query:width:height:format:expiration:quality:fit`, using
-  passes `--config`, and its `HEALTHCHECK` probes `PORT` (default `8080`);
+  `85` and `cover` when the URL has no `q` or `fit`, so one signed URL can no
-  the config file is looked for under `/etc/pixa` and `~/.config/pixa`
+  longer be replayed across other quality and fit values to create unauthorized
-  instead of the daemon name `pixad`; documented in `README.md` and
+  cache entries and transcodes; the known-answer vectors in
-  `config.example.yml`.
+  `internal/signature/golden_test.go` and the README signature specification
- 2026-09-28 quality and fit in the URL signature (closes #60): the signed
+  describe the new format.
-  data is now `host:path:query:width:height:format:expiration:quality:fit`,
+- 2026-09-28 Docker image healthcheck (closes #111): a `HEALTHCHECK` in the
-  using `85` and `cover` when the URL has no `q` or `fit`, so one signed
+  runtime stage probing `/.well-known/healthcheck.json` with busybox `wget`;
-  URL can no longer be replayed across other quality and fit values to
+  `script/docker-smoke` (`make docker-smoke`) builds the image, starts it with a
-  create unauthorized cache entries and transcodes; the known-answer
+  throwaway `PIXA_SIGNING_KEY`, and passes only once Docker reports it healthy
-  vectors in `internal/signature/golden_test.go` and the README signature
+  within 30 seconds, removing the container on exit; the Gitea workflow runs it
-  specification describe the new format.
+  after `script/cibuild`.
 - 2026-09-28 Docker image healthcheck (closes #111): a `HEALTHCHECK` in
  the runtime stage probing `/.well-known/healthcheck.json` with busybox
  `wget`; `script/docker-smoke` (`make docker-smoke`) builds the image,
  starts it with a throwaway `PIXA_SIGNING_KEY`, and passes only once
  Docker reports it healthy within 30 seconds, removing the container on
  exit; the Gitea workflow runs it after `script/cibuild`.
 - 2026-09-21 trusted-proxy client IP resolution (closes #94): a
  `trusted_proxies` config key taking a list of CIDRs, parsed by the same
-  `net/netip` list parser as `blocked_networks` (an invalid entry aborts
+  `net/netip` list parser as `blocked_networks` (an invalid entry aborts startup
-  startup naming the key and value; an omitted key defaults to the RFC 1918
+  naming the key and value; an omitted key defaults to the RFC 1918 private
-  private ranges, an explicitly empty list trusts no one, and an explicit
+  ranges, an explicitly empty list trusts no one, and an explicit list replaces
-  list replaces the default); a new
+  the default); a new `internal/clientip` package resolves the client address by
-  `internal/clientip` package resolves the client address by honoring
+  honoring `X-Forwarded-For` only when the direct peer is a trusted proxy,
-  `X-Forwarded-For` only when the direct peer is a trusted proxy, walking
+  walking the chain right-to-left to the rightmost non-proxy entry, so a client
-  the chain right-to-left to the rightmost non-proxy entry, so a client
+  connecting directly cannot spoof its address; the resolved address is stored
-  connecting directly cannot spoof its address; the resolved address is
+  in the request context by a new middleware and used by the request-logging
-  stored in the request context by a new middleware and used by the
+  middleware and the login-attempt logs in place of the raw peer address;
-  request-logging middleware and the login-attempt logs in place of the
+  documented in `README.md` and `config.example.yml`.
  raw peer address; documented in `README.md` and `config.example.yml`.
 - 2026-09-21 blocked networks configuration extending SSRF protection: a
-  `blocked_networks` config key taking a list of CIDRs (parsed with
+  `blocked_networks` config key taking a list of CIDRs (parsed with `net/netip`,
-  `net/netip`, an invalid entry aborts startup naming the key and value),
+  an invalid entry aborts startup naming the key and value), added to the
-  added to the built-in blocklist rather than replacing it; the built-in
+  built-in blocklist rather than replacing it; the built-in ranges extended to
-  ranges extended to CGNAT `100.64.0.0/10`, IETF protocol assignments
+  CGNAT `100.64.0.0/10`, IETF protocol assignments `192.0.0.0/24`, benchmark
-  `192.0.0.0/24`, benchmark `198.18.0.0/15`, and NAT64 `64:ff9b::/96`
+  `198.18.0.0/15`, and NAT64 `64:ff9b::/96` (IPv4-mapped forms covered);
-  (IPv4-mapped forms covered); enforcement stays in the dial-time
+  enforcement stays in the dial-time re-resolution so the DNS-rebinding window
-  re-resolution so the DNS-rebinding window remains closed; documented in
+  remains closed; documented in `README.md` and `config.example.yml`.
-  `README.md` and `config.example.yml`.
+- 2026-09-21 validate dimensions and fit mode on the encrypted-URL route and the
- 2026-09-21 validate dimensions and fit mode on the encrypted-URL
+  token generator (closes #62): `imgcache.ValidateDimension` alone holds the
-  route and the token generator (closes #62): `imgcache.ValidateDimension`
+  `MaxDimension` bound and is used by the path parser, by the new
-  alone holds the `MaxDimension` bound and is used by the path parser, by
+  `ValidateImageRequest` (which also applies `ValidateFitMode`) and by the
-  the new `ValidateImageRequest` (which also applies `ValidateFitMode`)
+  generator; both the `/v1/image/` and `/v1/e/` routes call
-  and by the generator; both the `/v1/image/` and `/v1/e/` routes call
+  `ValidateImageRequest`, so an over-limit size or an unknown fit mode is a 400
-  `ValidateImageRequest`, so an over-limit size or an unknown fit mode is a
+  rather than an out-of-memory or a 500 from the processor; the URL generator
-  400 rather than an out-of-memory or a 500 from the processor; the URL
+  answers 400 naming the field for a `width` or `height` that is not a number or
-  generator answers 400 naming the field for a `width` or `height` that is
+  fails the shared check, a `quality` that is not a number from 1 to 100, a
-  not a number or fails the shared check, a `quality` that is not a number
+  `ttl` that is not a number from 0 to the largest number of seconds the expiry
-  from 1 to 100, a `ttl` that is not a number from 0 to the largest number
+  calculation can hold, or an unknown `fit`; an empty `quality` is 85 and an
-  of seconds the expiry calculation can hold, or an unknown `fit`; an empty
+  empty `ttl` never expires; the form's width and height inputs stop at 8192
-  `quality` is 85 and
+- 2026-09-21 http.Server hardening (closes #92): added `HTTPReadHeaderTimeout`
-  an empty `ttl` never expires; the form's width and height inputs stop at
+  (10s, bounds the slowloris header dribble) and `HTTPIdleTimeout` (120s, bounds
-  8192
+  keep-alive reuse) alongside the existing timeouts and wired them onto the
- 2026-09-21 http.Server hardening (closes #92): added
+  server; added a `LimitBody` middleware capping the two form POST bodies
-  `HTTPReadHeaderTimeout` (10s, bounds the slowloris header dribble) and
+  (`POST /`, `POST /generate`) at `MaxFormBytes` (1 MiB) and returning 413,
-  `HTTPIdleTimeout` (120s, bounds keep-alive reuse) alongside the
+  applied ahead of the CSRF middleware so an oversized body is refused as 413
-  existing timeouts and wired them onto the server; added a `LimitBody`
+  rather than being read as a missing CSRF token (403); left `WriteTimeout` at
-  middleware capping the two form POST bodies (`POST /`, `POST /generate`)
+  60s unchanged
-  at `MaxFormBytes` (1 MiB) and returning 413, applied ahead of the CSRF
+- 2026-08-07 update golangci-lint to v2.12.2 with the canonical `.golangci.yml`
-  middleware so an oversized body is refused as 413 rather than being read
+  (v2 schema, `default: all` minus six disabled linters, `lll` 88, tests
-  as a missing CSRF token (403); left `WriteTimeout` at 60s unchanged
+  included): bumped the pinned `golangci/golangci-lint:v2.12.2-alpine` image in
- 2026-08-07 update golangci-lint to v2.12.2 with the canonical
+  `Dockerfile` and the release-archive sha256 pins in `script/bootstrap`; fixed
-  `.golangci.yml` (v2 schema, `default: all` minus six disabled
+  the findings the stricter config surfaced (notably `paralleltest`, `wsl_v5`,
  linters, `lll` 88, tests included): bumped the pinned
  `golangci/golangci-lint:v2.12.2-alpine` image in `Dockerfile` and the
  release-archive sha256 pins in `script/bootstrap`; fixed the findings
  the stricter config surfaced (notably `paralleltest`, `wsl_v5`,
  `goconst`, `lll`, `noinlineerr`, `err113`, `errcheck`, `testpackage` —
-  white-box test files renamed to `*_internal_test.go`), including #55's
+  white-box test files renamed to `*_internal_test.go`), including #55's code
-  code absorbed after it merged, iterating the pinned linter to
+  absorbed after it merged, iterating the pinned linter to `0 issues.`; no
-  `0 issues.`; no single finding total is substantiable, since
+  single finding total is substantiable, since golangci-lint's `uniq-by-line`
-  golangci-lint's `uniq-by-line` reveals new findings on a line as
+  reveals new findings on a line as others there are fixed — the documented
-  others there are fixed — the documented re-measurements were 81 after
+  re-measurements were 81 after the #53 merge and 149 after the #55 merge; three
-  the #53 merge and 149 after the #55 merge; three behavior changes, so
+  behavior changes, so not a pure no-op: `Cache.StoreVariant` now takes a
-  not a pure no-op: `Cache.StoreVariant` now takes a `context.Context`
+  `context.Context` (`noctx`), so a cancelled request skips its best-effort
-  (`noctx`), so a cancelled request skips its best-effort accounting
+  accounting row; `MetadataStorage.Store`'s cleanup defer was dead on `main` and
-  row; `MetadataStorage.Store`'s cleanup defer was dead on `main` and
+  leaked `.tmp-*.json` on failure, now fixed with explicit removals; and the
-  leaked `.tmp-*.json` on failure, now fixed with explicit removals; and
+  `signing_key` validation error text gained `value too short: `; the eviction
-  the `signing_key` validation error text gained `value too short: `;
+  loop's uncancellable context is deferred to #102 under a
-  the eviction loop's uncancellable context is deferred to #102 under a
+  `//nolint:contextcheck`; three `//nolint:tagliatelle` directives keep the
-  `//nolint:contextcheck`; three `//nolint:tagliatelle` directives keep
+  snake_case JSON wire/disk formats unchanged; `make check` green
-  the snake_case JSON wire/disk formats unchanged; `make check` green
+- 2026-08-07 implement cache size management and eviction (closes #51): new
- 2026-08-07 implement cache size management and eviction (closes
+  `cache_max_bytes` config key validated by the startup framework (explicit
-  #51): new `cache_max_bytes` config key validated by the startup
+  values used exactly with no floor, `0` disables the disk cache entirely,
-  framework (explicit values used exactly with no floor, `0` disables
+  omitted defaults to max(75% of free space on the filesystem containing
-  the disk cache entirely, omitted defaults to max(75% of free space
+  `<state_dir>/cache/`, 500 MiB), logged at startup); processed variants are now
-  on the filesystem containing `<state_dir>/cache/`, 500 MiB), logged
+  tracked in the database (a new `variant_content` table and an LRU timestamp on
-  at startup); processed variants are now tracked in the database (a
+  `source_content`) so total usage is two SUMs, never a directory scan on the
-  new `variant_content` table and an LRU timestamp on `source_content`)
+  hot path; a background goroutine evicts globally least-recently-used entries
-  so total usage is two SUMs, never a directory scan on the hot path; a
+  (variants and source blobs merged) to the limit, woken by a periodic ticker
-  background goroutine evicts globally least-recently-used entries
+  and by write-pressure notifications from stores; a source blob and ALL of its
-  (variants and source blobs merged) to the limit, woken by a periodic
+  `source_metadata` references are deleted in one transaction before the file is
-  ticker and by write-pressure notifications from stores; a source
+  unlinked, so multi-referenced blobs are never removed while referenced and
-  blob and ALL of its `source_metadata` references are deleted in one
+  rows never point at deleted files; a startup and periodic reconciliation pass
-  transaction before the file is unlinked, so multi-referenced blobs
+  adopts untracked variant files, drops rows for missing files, removes
-  are never removed while referenced and rows never point at deleted
+  unreachable source blobs, and sweeps stale temp files
-  files; a startup and periodic reconciliation pass adopts untracked
+- 2026-08-07 validate configuration on startup, fail fast on bad config (closes
-  variant files, drops rows for missing files, removes unreachable
+  #52): a config value that is set but unparseable or invalid aborts startup
-  source blobs, and sweeps stale temp files
+  naming the key and value (defaults apply only to omitted keys), unknown config
- 2026-08-07 validate configuration on startup, fail fast on bad
+  keys abort startup, a malformed config file aborts instead of being skipped,
-  config (closes #52): a config value that is set but unparseable or
+  and `state_dir` is verified creatable and writable before the listener binds
-  invalid aborts startup naming the key and value (defaults apply only
+- 2026-08-07 manual test pass of the auth and encrypted URL flows against a
-  to omitted keys), unknown config keys abort startup, a malformed
+  locally built and running `pixad` (built from `main` at `6573b9d`, port 18099,
-  config file aborts instead of being skipped, and `state_dir` is
+  local throwaway config); all six checks passed, plus all nine tests in
-  verified creatable and writable before the listener binds
+  `scripts/manual-test.sh` (closes #49):
- 2026-08-07 manual test pass of the auth and encrypted URL flows
+    - [x] visit `/` and see the login form: HTTP 200, `Pixa - Login` page with
-  against a locally built and running `pixad` (built from `main` at
+          `name="key"` password form
-  `6573b9d`, port 18099, local throwaway config); all six checks
+    - [x] wrong key shows an error: POST `/` with `key=wrong-key` returned HTTP
-  passed, plus all nine tests in `scripts/manual-test.sh` (closes #49):
+          200 login page containing "Invalid signing key"
-    - [x] visit `/` and see the login form: HTTP 200, `Pixa - Login`
+    - [x] correct signing key shows the generator form: POST `/` returned HTTP
-      page with `name="key"` password form
+          303 to `/` with
-    - [x] wrong key shows an error: POST `/` with `key=wrong-key`
+          `Set-Cookie: pixa_session=...; HttpOnly; Secure; SameSite=Strict`; GET
-      returned HTTP 200 login page containing "Invalid signing key"
+          `/` with that cookie rendered `Pixa - URL Generator` with the
-    - [x] correct signing key shows the generator form: POST `/`
+          `/generate` form and logout link
      returned HTTP 303 to `/` with
      `Set-Cookie: pixa_session=...; HttpOnly; Secure; SameSite=Strict`;
      GET `/` with that cookie rendered `Pixa - URL Generator` with the
      `/generate` form and logout link
    - [x] a generated encrypted URL serves the image: POST `/generate`
-      (ttl=3600) produced a `/v1/e/<token>/img.jpeg` URL that returned
+          (ttl=3600) produced a `/v1/e/<token>/img.jpeg` URL that returned HTTP
-      HTTP 200, `Content-Type: image/jpeg`, an 800x600 baseline JPEG of
+          200, `Content-Type: image/jpeg`, an 800x600 baseline JPEG of 61706
-      61706 bytes
+          bytes
-    - [x] an expired URL (short TTL) returns 410: a ttl=1 URL fetched
+    - [x] an expired URL (short TTL) returns 410: a ttl=1 URL fetched after 3 s
-      after 3 s returned HTTP 410 Gone with
+          returned HTTP 410 Gone with
-      `{"error":"URL has expired","status":410,...}`
+          `{"error":"URL has expired","status":410,...}`
-    - [x] logout redirects back to login: GET `/logout` returned HTTP
+    - [x] logout redirects back to login: GET `/logout` returned HTTP 303 to `/`
-      303 to `/` with `Set-Cookie: pixa_session=; Max-Age=0`;
+          with `Set-Cookie: pixa_session=; Max-Age=0`; subsequent GET `/`
-      subsequent GET `/` rendered the login form again
+          rendered the login form again
- 2026-08-07 fix the two remaining gosec findings (G124 in
+- 2026-08-07 fix the two remaining gosec findings (G124 in internal/session):
-  internal/session): session cookies now always carry
+  session cookies now always carry Secure/HttpOnly/SameSite=Strict on both the
-  Secure/HttpOnly/SameSite=Strict on both the set and clear paths;
+  set and clear paths; `make check` green (closes #47)
-  `make check` green (closes #47)
+- 2026-07-07 Adopted scripts-to-rule-them-all: `script/` entrypoints, Makefile
- 2026-07-07 Adopted scripts-to-rule-them-all: `script/` entrypoints,
+  shims, README Entrypoints section
  Makefile shims, README Entrypoints section
 - 2026-04-07 extract magic byte detection into internal/magic (#42)
 - 2026-03-25 extract allowlist package from internal/imgcache (#41)
 - 2026-03-25 move schema_migrations table creation into 000.sql (#36)
- 2026-03-20 enforce and document exact-match-only signature
+- 2026-03-20 enforce and document exact-match-only signature verification (#40)
-  verification (#40)
+- 2026-03-20 bound imageprocessor.Process input read to prevent unbounded memory
- 2026-03-20 bound imageprocessor.Process input read to prevent
+  use (#37); consolidate appname into an internal/globals constant (#34)
  unbounded memory use (#37); consolidate appname into an
  internal/globals constant (#34)
 - 2026-03-18 parse version prefix from migration filenames (#33)
 - 2026-03-15 QA audit fixes for 1.0/MVP readiness (#25)
- 2026-03-02 split Dockerfile with pre-built golangci-lint stage for
+- 2026-03-02 split Dockerfile with pre-built golangci-lint stage for faster CI
-  faster CI (#23)
+  (#23)
 - 2026-02-25 repo policy compliance: CI workflow, hash-pinned images,
-  golangci-lint and gosec fixes of that date (#14); arm64 Docker build
+  golangci-lint and gosec fixes of that date (#14); arm64 Docker build fix (#16)
-  fix (#16)
+- 2026-01-08 WebP and AVIF encoding support via govips (both former P0 image
- 2026-01-08 WebP and AVIF encoding support via govips (both former P0
+  processing items, now done)
  image processing items, now done)
 # Future Steps
@@ -0,0 +1,6 @@
 {
  "license": "GPL-3.0",
  "devDependencies": {
    "prettier": "3.8.1"
  }
 }
@@ -3,20 +3,33 @@
 # this repo. Idempotent: every install is guarded by a check so already
 # installed tools are skipped. Base tooling comes from nix, apt, brew,
 # or apk (detected in that order); assumes NOTHING is present (not git,
-# make, or go). The linter is never installed on the host: golangci-lint
+# make, or go). Node is used directly if installed; otherwise it is
-# runs only in the lint phase of the Dockerfile (see script/lint).
+# installed at a pinned version via nvm (installing nvm itself first,
 # from a hash-verified release archive, never curl | sh). The linter is
 # never installed on the host: golangci-lint runs only in the lint phase
 # of the Dockerfile (see script/lint).
 #
-#   script/bootstrap         git, make and Go, all the host needs: the
+#   script/bootstrap         git, make, Go, and Node, Yarn and the
-#                            checks compile pixa in Docker
+#                            prettier in yarn.lock for script/fmt and
-#   script/bootstrap --cgo   also a C compiler and the CGO image
+#                            script/fmt-check: all the host needs, as
-#                            libraries (pkg-config, vips, libheif) for
+#                            the checks compile pixa in Docker
-#                            the govips bindings, to compile pixa; the
+#   script/bootstrap --cgo   git, make, Go, and a C compiler and the
-#                            Dockerfile's test phase and build stage
+#                            CGO image libraries (pkg-config, vips,
-#                            run this
+#                            libheif) for the govips bindings instead
 #                            of Node: to compile pixa, in the
 #                            Dockerfile's test phase and build stage,
 #                            which format nothing
 set -eu
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 # Pinned versions, 2026-07-06
 NODE_VERSION="22.17.0"
 NVM_VERSION="0.40.3"
 # sha256 of https://github.com/nvm-sh/nvm/archive/refs/tags/v0.40.3.tar.gz
 NVM_SHA256="5f4d6aaa04a177dc93c985e31dbc411ab6b8c6e1e21d8015dbc1372625fcd1d0"
 YARN_VERSION="1.22.22"
 PKGMGR=""
 SUDO=""
@@ -61,6 +74,69 @@ missing() {
    ! command -v "$1" >/dev/null 2>&1
 }
 # verify_sha256 <file> <expected-hash>
 verify_sha256() {
    if command -v sha256sum >/dev/null 2>&1; then
        actual="$(sha256sum "$1" | cut -d' ' -f1)"
    else
        actual="$(shasum -a 256 "$1" | cut -d' ' -f1)"
    fi
    if [ "$actual" != "$2" ]; then
        echo "bootstrap: sha256 mismatch for $1" >&2
        echo "  expected: $2" >&2
        echo "  actual:   $actual" >&2
        exit 1
    fi
 }
 # nvm is a bash script; run a command in a bash with nvm loaded
 nvm_sh() {
    bash -c ". \"\$HOME/.nvm/nvm.sh\" && $*"
 }
 ensure_nvm() {
    [ -s "$HOME/.nvm/nvm.sh" ] && return 0
    # nvm prerequisites; nvm itself requires bash
    if missing bash; then pkg_install bash bash bash bash; fi
    if missing curl; then pkg_install curl curl curl curl; fi
    if missing git; then pkg_install git git git git; fi
    tmp="$(mktemp -d)"
    curl -fsSL -o "$tmp/nvm.tar.gz" \
        "https://github.com/nvm-sh/nvm/archive/refs/tags/v${NVM_VERSION}.tar.gz"
    verify_sha256 "$tmp/nvm.tar.gz" "$NVM_SHA256"
    mkdir -p "$HOME/.nvm"
    tar -xzf "$tmp/nvm.tar.gz" -C "$HOME/.nvm" --strip-components=1
    rm -rf "$tmp"
 }
 ensure_node() {
    if ! missing node; then return 0; fi
    ensure_nvm
    nvm_sh "nvm install $NODE_VERSION"
 }
 ensure_yarn() {
    if ! missing yarn; then return 0; fi
    if ! missing corepack; then
        corepack enable
        corepack prepare "yarn@$YARN_VERSION" --activate
    elif [ -s "$HOME/.nvm/nvm.sh" ]; then
        nvm_sh "nvm use $NODE_VERSION >/dev/null && corepack enable && \
            corepack prepare yarn@$YARN_VERSION --activate"
    else
        npm install -g "yarn@$YARN_VERSION"
    fi
 }
 install_js_deps() {
    if missing yarn && [ -s "$HOME/.nvm/nvm.sh" ]; then
        nvm_sh "nvm use $NODE_VERSION >/dev/null && cd \"$ROOT\" && \
            yarn install --frozen-lockfile"
    else
        yarn install --frozen-lockfile
    fi
 }
 # CGO dependencies for govips (image processing)
 ensure_cgo_deps() {
    # cgo compiles with gcc on Linux; build-base and build-essential
@@ -98,9 +174,14 @@ main() {
    # Go toolchain
    if missing go; then pkg_install go golang go go; fi
-    # CGO image libraries, only where pixa is compiled
+    # CGO image libraries where pixa is compiled; elsewhere Node, Yarn
    # and prettier
    if [ "$*" = "--cgo" ]; then
        ensure_cgo_deps
    else
        ensure_node
        ensure_yarn
        install_js_deps
    fi
    go mod download
@@ -4,11 +4,31 @@ set -eu
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 # Must match the pin in script/bootstrap.
 NODE_VERSION="22.17.0"
 # script/bootstrap installs node and yarn under nvm and leaves neither
 # on the PATH of the shell that called it, so resolve the pinned
 # toolchain here the way bootstrap's own install step does. nvm is a
 # bash script, hence the subshell.
 run_yarn() {
    if command -v yarn >/dev/null 2>&1; then
        exec yarn "$@"
    fi
    if [ ! -s "$HOME/.nvm/nvm.sh" ]; then
        echo "fmt: no yarn; run script/bootstrap first" >&2
        exit 1
    fi
    exec bash -c '. "$HOME/.nvm/nvm.sh" && nvm use "$1" >/dev/null &&
        shift && exec yarn "$@"' bash "$NODE_VERSION" "$@"
 }
 main() {
    cd "$ROOT"
    echo "Formatting code..."
    # shellcheck disable=SC2046 # word splitting of file list is wanted
    gofmt -w $(find . -name '*.go' -not -path './vendor/*')
    run_yarn run prettier --write '**/*.md' --tab-width 4 --prose-wrap always
 }
 main "$@"
@@ -5,6 +5,25 @@ set -eu
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 # Must match the pin in script/bootstrap.
 NODE_VERSION="22.17.0"
 # script/bootstrap installs node and yarn under nvm and leaves neither
 # on the PATH of the shell that called it, so resolve the pinned
 # toolchain here the way bootstrap's own install step does. nvm is a
 # bash script, hence the subshell.
 run_yarn() {
    if command -v yarn >/dev/null 2>&1; then
        exec yarn "$@"
    fi
    if [ ! -s "$HOME/.nvm/nvm.sh" ]; then
        echo "fmt-check: no yarn; run script/bootstrap first" >&2
        exit 1
    fi
    exec bash -c '. "$HOME/.nvm/nvm.sh" && nvm use "$1" >/dev/null &&
        shift && exec yarn "$@"' bash "$NODE_VERSION" "$@"
 }
 main() {
    cd "$ROOT"
    echo "Checking formatting..."
@@ -13,6 +32,7 @@ main() {
        gofmt -l . | grep -v '^vendor/'
        exit 1
    fi
    run_yarn run prettier --check '**/*.md' --tab-width 4 --prose-wrap always
 }
 main "$@"
@@ -0,0 +1,8 @@
 # THIS IS AN AUTOGENERATED FILE. DO NOT EDIT THIS FILE DIRECTLY.
 # yarn lockfile v1
 prettier@3.8.1:
  version "3.8.1"
  resolved "https://registry.yarnpkg.com/prettier/-/prettier-3.8.1.tgz#edf48977cf991558f4fcbd8a3ba6015ba2a3a173"
  integrity sha512-UOnG6LftzbdaHZcKoPFtOcCKztrQ57WkHDeRD9t/PTQtmT0NHSeWWepj6pS0z/N7+08BHFDQVUrfmfMRcZwbMg==