Run pixad on the Alpine release it is built on (closes #229)

The runtime stage of the Dockerfile moves from alpine:3.21 to
alpine:3.22, pinned by digest. The test phase and the build stage use
the golang image built on Alpine 3.22, so pixad was compiled against
libvips 8.16 and ran against 8.15. All three stages now install their
packages from the same Alpine release, where the runtime packages keep
their names. The golang pins now name that release as
golang:1.25.4-alpine3.22, with the same digest, and say that the runtime
stage uses it too. README.md now says the image has libvips 8.16.

Model: opus-5-5

Dockerfile

@@ -32,13 +32,10 @@ RUN script/bootstrap --cgo
 COPY . .
 
 # Without -v first; on a failure, again with -v for the details, and
-# the step fails even if the second run passes. -parallel 4: by default
-# a package runs as many of its tests at once as the host has CPUs, and
-# on a busy host they then wait so long to be scheduled that a test
-# that times a request can see it return a second late.
-RUN go test -count=1 -timeout 90s -race -parallel 4 -cover ./... || \
+# the step fails even if the second run passes.
+RUN go test -count=1 -timeout 90s -race -cover ./... || \
     { echo "--- Rerunning with -v for details ---"; \
-      go test -count=1 -timeout 90s -race -parallel 4 -v ./...; exit 1; }
+      go test -count=1 -timeout 90s -race -v ./...; exit 1; }
 
 # Build stage. Nothing is wanted from the two phases above: these copies
 # make BuildKit build them first, so this stage runs only when lint and

README.md

@@ -46,9 +46,9 @@ everything in this list without further settings. The reverse proxy must:
   builds encrypted URLs from `Host`, and checks `Referer` against
   `referer_blocklist`;
 - set `X-Forwarded-For` to the client's address, with `trusted_proxies` set to
-  the address pixa sees the proxy's requests come from, so the login limit and
-  `image_requests_per_minute` count each client by its own address (see
-  `trusted_proxies` under Configuration);
+  the address pixa sees the proxy's requests come from, so the login limit
+  counts each client by its own address (see `trusted_proxies` under
+  Configuration);
 - wait for pixa's answer for at least `downstream_timeout` (default `60s`), the
   longest pixa takes to fetch, convert and send an image.
 
@@ -58,9 +58,8 @@ password there.
 
 pixa does the rest itself: it checks signatures and encrypted URLs, applies the
 allowlist, refuses upstream hosts with private or local addresses, limits login
-attempts, each client's image requests, upstream response size and image
-dimensions, and sends the security headers, `Strict-Transport-Security`
-included, with every response.
+attempts, upstream response size and image dimensions, and sends the security
+headers, `Strict-Transport-Security` included, with every response.
 
 The state directory (`state_dir`, `/var/lib/pixa` in the container) holds the
 database and the disk cache:
@@ -84,12 +83,10 @@ which answers 200 whenever pixa is running, in maintenance mode too (see
 `maintenance_mode`).
 
 On SIGTERM or SIGINT pixa stops accepting connections, gives the requests in
-progress and the images being processed 5 seconds to finish, then writes to the
-database the counts of cache hits, misses, fetches and conversions that requests
-could not write by their deadline, and exits: with 0, or with 1 when images were
-still being processed after those 5 seconds, some of those counts could not be
-written, or another part of pixa failed to stop. A request not finished by then
-is cut off. `docker stop` waits 10 seconds before it kills the container.
+progress and the images being processed 5 seconds to finish, and exits: with 0,
+or with 1 when images were still being processed after those 5 seconds or
+another part of pixa failed to stop. A request not finished by then is cut off.
+`docker stop` waits 10 seconds before it kills the container.
 
 Outside Docker, pixa needs libvips (the image has 8.16) and libheif to run, as
 it uses libvips through CGO. pixad does not start unless libvips has its JPEG XL
@@ -178,24 +175,20 @@ path under `/v1/` answers 200, in maintenance mode too.
   with the page naming a field that is not valid; 500 when the URL cannot be
   made.
 - `GET /logout` — end the login session. Needs: nothing. Answers: 303 to `/`.
-- `GET` or `HEAD` `/v1/image/<host>/<path>/<size>.<format>`, or
-  `/v1/image/<host>/<path>/<size>` with no format — an image, fetched, resized
-  and converted (below). Needs: a signature, unless the host is allowlisted (see
-  Source Hosts). Answers: 200; 304 when `If-None-Match` matches the image's
-  `ETag`; 400 for a URL or parameter that is not valid, or for the format `auto`
-  an `Accept` header that is not valid; 406 for the format `auto` when `Accept`
-  allows none of the formats it chooses from; 401 for a missing or wrong
-  signature, a missing `exp` or an `exp` in the past; 403 when the request's
-  `Referer` names a host in `referer_blocklist`, checked before the signature,
-  the cache and the upstream fetch; 403 when the upstream host, or a host it
-  redirects to, is `localhost`, ends in `.localhost` or `.local`, or has an
-  address in a blocked network (see `blocked_networks`); 429 over
-  `image_requests_per_minute` (below); 415 when the upstream answers with a
-  `Content-Type` that is not one of the source formats (below), or with an image
-  whose first bytes libvips reads as another format; 502 when the upstream
-  answered with an error status, and for 5 minutes after that for the same
-  source URL; 503 when pixa is busy or in maintenance mode; 500 for any other
-  failure.
+- `GET` or `HEAD` `/v1/image/<host>/<path>/<size>.<format>` — an image, fetched,
+  resized and converted (below). Needs: a signature, unless the host is
+  allowlisted (see Source Hosts). Answers: 200; 304 when `If-None-Match` matches
+  the image's `ETag`; 400 for a URL or parameter that is not valid, or for the
+  format `auto` an `Accept` header that is not valid; 406 for the format `auto`
+  when `Accept` allows none of the formats it chooses from; 401 for a missing or
+  wrong signature, a missing `exp` or an `exp` in the past; 403 when the
+  request's `Referer` names a host in `referer_blocklist`, checked before the
+  signature, the cache and the upstream fetch; 403 when the upstream host, or a
+  host it redirects to, is `localhost`, ends in `.localhost` or `.local`, or has
+  an address in a blocked network (see `blocked_networks`); 502 when the
+  upstream answered with an error status, and for 5 minutes after that for the
+  same source URL; 503 when pixa is busy or in maintenance mode; 500 for any
+  other failure.
 - `GET` or `HEAD` `/v1/e/<token>/<name>` — an image through an encrypted URL
   (see Encrypted URLs). Needs: nothing but the URL. Answers: 200; 304 when
   `If-None-Match` matches the image's `ETag`; 400 for a token that does not
@@ -203,7 +196,7 @@ path under `/v1/` answers 200, in maintenance mode too.
   expired; 504 when the upstream has not sent its response headers within
   `upstream_fetch_timeout`, but 500 when that time runs out while the image
   itself is still arriving; 400 for an `Accept` header that is not valid, and
-  406, 403, 415, 429, 502, 503 and 500, as for `/v1/image/`.
+  406, 403, 502, 503 and 500, as for `/v1/image/`.
 - `GET /robots.txt` — asks every crawler to stay away (`Disallow: /`). Needs:
   nothing. Answers: 200.
 - `GET /.well-known/healthcheck.json` — JSON with `status` (`ok`), `now`,
@@ -238,11 +231,10 @@ proxy in front of pixa must pass that header on unchanged. A form body over 1
 MiB is refused with 413. The image routes answer the errors listed for them with
 JSON holding `error`, `status` and `timestamp`.
 
-An image URL has one of these forms, the second with no format:
+An image URL has this form:
 
 ```
 /v1/image/<host>/<path>/<size>.<format>?sig=<signature>&exp=<expiration>&q=<quality>&fit=<fit>
-/v1/image/<host>/<path>/<size>?sig=<signature>&exp=<expiration>&q=<quality>&fit=<fit>
 ```
 
 Images are only fetched from origins using TLS with valid certificates, unless
@@ -253,9 +245,7 @@ A request whose query string cannot be decoded, or gives any parameter more than
 once, is refused with 400.
 
 - `<format>`: one of `orig` (or `original`), `jpeg` (or `jpg`), `png`, `webp`,
-  `avif`, `jxl` (JPEG XL), `gif`, or `auto` (below). A URL with no format (the
-  second form, with no dot after the size) is served as JPEG XL, the default, as
-  with `jxl`
+  `avif`, `gif`, or `auto` (below)
 - `<size>`: `orig` or `<width>x<height>` (e.g. `800x600`)
 - `sig` and `exp`: the signature and its expiry, needed unless the host is
   allowlisted (see Signature Specification)
@@ -263,37 +253,23 @@ once, is refused with 400.
   both optional (values under Signature Specification). Both are part of what is
   cached, so each value of either is a separate cached image.
 
-A size with one side `0` has that side scaled to keep the source's proportions,
-and is refused with 400 when that side would come out above 8192, the most
-either side may be; so is a size with `fit=outside`, which scales the image to
-cover the size and so past it on one side, when that side would come out
-above 8192.
-
-The source image may be JPEG, PNG, GIF, WebP, AVIF or JPEG XL. The upstream's
-`Content-Type` must name its format, and the image's first bytes must match it.
-An upstream answering with any other `Content-Type`, SVG included, is refused
-with 415, and so is an image whose first bytes libvips reads as another format,
-such as an SVG whose first bytes pass the check for AVIF.
-
 With the format `auto`, pixa chooses the format for each request from its
 `Accept` header, in this order:
 
-1. JPEG XL, when the header names `image/jxl`;
-2. AVIF, when it names `image/avif`;
-3. WebP, when it names `image/webp`;
-4. JPEG, when the first of `image/jpeg`, `image/*` and `*/*` that it names
+1. AVIF, when the header names `image/avif`;
+2. WebP, when it names `image/webp`;
+3. JPEG, when the first of `image/jpeg`, `image/*` and `*/*` that it names
    allows it, or when there is no `Accept` header or it is empty.
 
 An entry with `q=0` refuses its format; other `q` values do not change the
-order. JPEG XL, AVIF and WebP must be named, as clients that cannot show them
-also send `image/*` and `*/*`. pixa never sends a format the client refused:
-when the header allows none of the four, the answer is 406, and a header that
-does not parse, or has a `q` that is not a number from 0 to 1, is refused
-with 400. The signature, or the token of an encrypted URL, covers `auto` itself,
-so one URL serves every client. Each format chosen is cached as a separate
-image, and every answer that depends on `Accept` (the image, a 304, and the 400
-and 406 above) carries `Vary: Accept`, so a shared cache keeps the formats apart
-too.
+order. AVIF and WebP must be named, as clients that cannot show them also send
+`image/*` and `*/*`. pixa never sends a format the client refused: when the
+header allows none of the three, the answer is 406, and a header that does not
+parse, or has a `q` that is not a number from 0 to 1, is refused with 400. The
+signature, or the token of an encrypted URL, covers `auto` itself, so one URL
+serves every client. Each format chosen is cached as a separate image, and every
+answer that depends on `Accept` (the image, a 304, and the 400 and 406 above)
+carries `Vary: Accept`, so a shared cache keeps the formats apart too.
 
 An image is served with `Cache-Control: public, max-age=<seconds>, immutable`.
 When the URL has an expiry (an `exp`, or the TTL of an encrypted URL), `max-age`
@@ -327,15 +303,6 @@ its own `X-Forwarded-For`, whether it connects directly or through the proxy,
 because its own address is trusted too. Setting `trusted_proxies` to only the
 address pixa sees for requests that come through the proxy closes this.
 
-One client may send `image_requests_per_minute` requests per minute
-(default 600) to the image routes, `/v1/image/` and `/v1/e/` together, `GET` and
-`HEAD`, cache hits included; a request over the limit is refused with 429 and a
-`Retry-After` header. Clients are counted as for the login limit. A browser's
-CORS preflight is not counted. Behind a CDN or proxy whose addresses are not in
-`trusted_proxies`, all requests arriving from one proxy or CDN address count as
-one client, so such a deployment needs a higher limit, or `0`, which turns the
-limit off.
-
 ### Encrypted URLs
 
 An encrypted URL is an image URL made on pixa's own web page by someone who
@@ -348,16 +315,13 @@ nor change what it asks for.
    lasts 30 days, or until `/logout`.
 2. On the generator page, give the source image's URL, the width and height, the
    format, quality and fit, and how long the URL lasts, then submit the form
-   (`POST /generate`). The format is JPEG XL unless another is chosen; a form
-   sent with an empty format, or none, also makes a JPEG XL URL. Width and
-   height both empty or `0` keep the original size; if only one of them is empty
-   or `0`, that side is scaled to keep the image's proportions. A URL whose
-   scaled side would come out above 8192 answers 400.
+   (`POST /generate`). Width and height both empty or `0` keep the original
+   size; if only one of them is empty or `0`, that side is scaled to keep the
+   image's proportions.
 3. The page shows the URL, `https://<host>/v1/e/<token>/img.<format>`, and when
    it expires. `<host>` is the host the page was opened on, and the URL starts
    with `http` instead while `debug` is on. The name after the token is ignored
-   and only gives the URL a file extension, `jpg` for `orig` and `auto`, and
-   `jxl` for a form with no format.
+   and only gives the URL a file extension, `jpg` for `orig` and `auto`.
 
 The token holds the source's host, path and query and the size, format, quality,
 fit and expiry, encrypted with a key derived from `signing_key`. The source
@@ -386,10 +350,6 @@ turned off.
 - An image with an ICC profile is converted to sRGB first, since clients show an
   image with no profile as sRGB. Colours outside sRGB, such as the most
   saturated ones in a Display P3 photo, are clipped.
-- The one exception is JPEG XL with libvips 8.16 and later: libvips then writes
-  an EXIF block of its own into the image, as govips cannot ask libvips to leave
-  it out. It holds the image's size and otherwise fixed values, such as an
-  orientation of 1 and a resolution of 72 dpi, and nothing from the source.
 
 ### Source Hosts
 
@@ -417,9 +377,8 @@ Where:
 - `width` — requested width in pixels, `0` for original
 - `height` — requested height in pixels, `0` for original
 - `format` — output format, one of those listed under Routes, with `original`
-  signed as `orig`, `jpg` as `jpeg`, and no format as `jxl`, so a URL with no
-  format has the signature of the same URL ending in `.jxl`; `auto` is signed as
-  `auto`, not as the format chosen for the request
+  signed as `orig` and `jpg` as `jpeg`; `auto` is signed as `auto`, not as the
+  format chosen for the request
 - `expiration` — the URL's `exp` query parameter, the Unix timestamp when the
   signature expires; a request whose `exp` is not a whole number, an empty
   `exp=` included, is refused with 400
@@ -506,7 +465,6 @@ tell. With no file, pixa uses the environment and the defaults.
 | `PIXA_UPSTREAM_CONNECTIONS_PER_HOST` | `upstream_connections_per_host` | Concurrent connections per upstream host; default `20`                       |
 | `PIXA_UPSTREAM_CONNECTIONS`          | `upstream_connections`          | Concurrent connections to all upstream hosts together; default `64`          |
 | `PIXA_MAX_CONCURRENT_PROCESSING`     | `max_concurrent_processing`     | Images processed at once; default the number of CPUs                         |
-| `PIXA_IMAGE_REQUESTS_PER_MINUTE`     | `image_requests_per_minute`     | Image requests per client per minute; `0` turns it off; default `600`        |
 | `PIXA_UPSTREAM_FETCH_TIMEOUT`        | `upstream_fetch_timeout`        | Time allowed for one fetch from an upstream host; default `30s`              |
 | `PIXA_UPSTREAM_MAX_RESPONSE_SIZE`    | `upstream_max_response_size`    | Largest upstream response accepted, in bytes; default 50 MiB                 |
 | `PIXA_DOWNSTREAM_TIMEOUT`            | `downstream_timeout`            | Time allowed for answering one client request; default `60s`                 |
@@ -556,13 +514,13 @@ Key settings in more detail:
   explicit list replaces the default. An invalid CIDR aborts startup. Set this
   to the address pixa sees for requests that come through your proxy, such as
   `172.17.0.1/32`, when the defaults do not cover it, or to trust nothing else
-  (see the login limit and `image_requests_per_minute` under Routes). For a
-  proxy on the Docker host that connects to pixa over `127.0.0.1`, that address
-  is the gateway of the container's Docker network (`172.17.0.1` on the default
-  bridge), not the proxy's own address; a proxy that connects through another of
-  the host's addresses is seen with that address. To be sure which address it
-  is, set this to `[]` (or `PIXA_TRUSTED_PROXIES` to empty), send a request
-  through the proxy, and read `remoteIP` in pixa's request log line for it
+  (see the login limit under Routes). For a proxy on the Docker host that
+  connects to pixa over `127.0.0.1`, that address is the gateway of the
+  container's Docker network (`172.17.0.1` on the default bridge), not the
+  proxy's own address; a proxy that connects through another of the host's
+  addresses is seen with that address. To be sure which address it is, set this
+  to `[]` (or `PIXA_TRUSTED_PROXIES` to empty), send a request through the
+  proxy, and read `remoteIP` in pixa's request log line for it
 - `upstream_fetch_timeout` — time allowed for one fetch from an upstream host,
   as a duration such as `30s` (the default) or `2m`
 - `upstream_max_response_size` — largest upstream response accepted, in bytes;
@@ -595,12 +553,6 @@ Key settings in more detail:
   container's CPU limit. A request that finds all of them in use waits up to 10
   seconds for one to free up; if none does, and `downstream_timeout` has not
   ended first, it is answered 503 the same way
-- `image_requests_per_minute` — how many requests one client may send to the
-  image routes per minute (see the limit on them under Routes); default `600`.
-  `0` turns the limit off, and a negative or non-integer value aborts startup.
-  Behind a CDN or proxy whose addresses are not in `trusted_proxies`, all
-  requests arriving from one proxy or CDN address count as one client, so raise
-  the limit there, or set `0`
 - `maintenance_mode` — while `true`, the image routes (`/v1/image/` and
   `/v1/e/`) answer every request for an image with 503, a `Retry-After` header
   and a JSON error body. The health check (`/.well-known/healthcheck.json`)

TODO.md

@@ -26,109 +26,10 @@ resolved. The disk cache is now size-bounded with LRU eviction
 
 # Next Step
 
-P2: security: per-origin rate limiting
+P2: security: per-IP rate limiting on the image routes
 
 # Completed Steps
 
-- 2026-10-13 `fit=outside` no longer makes an output above 8192 on a side
-  (closes #257): it scales the image to cover the requested size, and the side
-  scaled past that size was held to no maximum, so `1x8192?fit=outside` of a
-  3000x600 source was resized to 40960x8192 and encoded. The image processor now
-  refuses such a size with `ErrOutputTooLarge` before resizing, and both image
-  routes answer it 400, as for a size with one side `0`. The other fit modes
-  make the requested size or one within it, so none can go above 8192.
-- 2026-10-13 a size with one side `0` no longer makes an output above 8192 on a
-  side (closes #241): that side is computed from the source's proportions, and
-  nothing held it to the 8192 a requested side is held to, so `0x8192` of a
-  3000x600 source was resized to 40960x8192 and encoded. The image processor now
-  refuses such a size with `ErrOutputTooLarge` once it knows the source's
-  dimensions, before resizing, and both image routes answer it 400 with the JSON
-  error body. The refusal is not cached as a failed fetch, so the same source is
-  still served at other sizes. `imgcache.MaxDimension` is now the image
-  processor's `MaxOutputDimension`, so the two cannot differ.
-- 2026-10-13 the unused cache lifetime is removed (closes #69):
-  `CacheConfig.CacheTTL`, which pixad set to `DefaultCacheTTL` (24 hours), was
-  never read, so cached images never expired. The field and the constant are
-  removed. Cached source and transformed images stay until eviction removes them
-  to keep the cache within `cache_max_bytes`.
-- 2026-10-13 SVG sources are refused, and `orig` is never saved as JPEG in place
-  of the source's own format (closes #68): the upstream fetch no longer accepts
-  `image/svg+xml`, which libvips would render. Both image routes answer 415 for
-  an upstream `Content-Type` that is not one of the source formats, SVG
-  included, where they answered 500. Before decoding, the image processor
-  refuses with `ErrUnsupportedInputFormat`, also answered 415, any input that
-  govips' `DetermineImageType`, which picks the libvips loader from the first
-  bytes, does not name as a source format. That catches an SVG whose first bytes
-  pass the first-bytes check for another type, as an XML comment can make them
-  do for AVIF; an SVG whose first bytes do not pass that check answers 500, as
-  before, and so does a damaged image in a source format, whose first bytes
-  `DetermineImageType` names. `orig` is always the source's own format, where a
-  source the processor could not name was saved as JPEG. `README.md` no longer
-  lists SVG. The SVG detection in `internal/magic` stays: the request path does
-  not call it, and it goes with the unused code of
-  https://git.eeqj.de/sneak/pixa/issues/168.
-- 2026-10-12 per-client limit on the image routes (closes #236): the new setting
-  `image_requests_per_minute` (`PIXA_IMAGE_REQUESTS_PER_MINUTE`), default 600,
-  is how many `GET` and `HEAD` requests one client may send to `/v1/image/` and
-  `/v1/e/` together per minute, cache hits included; the next is answered 429
-  with `Retry-After`. It uses the login limit's `RateLimit` middleware, so
-  clients are told apart the same way, and runs after the CORS middleware, so a
-  preflight is not counted. `0` turns the limit off; a negative or non-integer
-  value aborts startup.
-- 2026-10-08 a request past its deadline no longer waits for the database to
-  count it (closes #224). On a busy host, `TestService_Get_ReturnsByItsDeadline`
-  failed because its request, past its deadline, still waited for its miss count
-  to be written, a write with no deadline, which in pixad waits for the one
-  database connection every request shares. Each count write now keeps the
-  request's deadline but not its cancellation. A count not written by then is
-  kept in memory, where `Stats` sees it, and one goroutine of the cache writes
-  those counts, one write at a time, and once more at shutdown before the
-  database closes. The test phase of the `Dockerfile` also runs at most 4 tests
-  of a package at once (`go test -parallel 4`), where it ran as many as the host
-  has CPUs: on a busy host they then wait so long to be scheduled that a test
-  that times a request can fail. `-p`, how many packages are tested at once, is
-  unchanged, as capping it also slows compiling.
-- 2026-10-08 every output format is saved with settings pixa sets on purpose
-  (closes #232): each format has its own govips export, as JPEG XL does, in
-  place of govips' generic `Export`, which sent libvips a zero for some settings
-  it was not given. PNG gets libvips' default compression, 6, where it had none,
-  and WebP libvips' default effort, 4, where it had 0. GIF was already at
-  libvips' default effort, 7, and JPEG output is unchanged. AVIF is saved at
-  effort 1, the lowest govips can set, where it had libvips' default, 4. With
-  one libvips thread, an 8192x8192 image of random pixels, the worst case, takes
-  about 51 seconds as AVIF at effort 1 and 43 as WebP at effort 4, against the
-  default `downstream_timeout` of 60 seconds. On an image of milder noise, which
-  AVIF at effort 1 saves in about 12 seconds, effort 4 takes minutes. AVIF is
-  also saved with 8 bits per sample from a 16-bit source, which libvips would
-  save with 12: a 16-bit 8192x8192 image of milder noise takes about 54 seconds
-  at effort 1 with 12 bits, nearly all of the default `downstream_timeout`, and
-  about 12 with 8.
-- 2026-10-08 JPEG XL is the default output (closes #222): a `/v1/image/` URL
-  whose last segment is a size with no format, such as `800x600` or `orig`, is
-  served as JPEG XL and signed as `jxl`, so it has the signature of the same URL
-  ending in `.jxl`. An encrypted URL whose token holds no format is served as
-  JPEG XL (`encurl.DefaultFormat`). The generator page selects JPEG XL until
-  another format is chosen, and a form with an empty format, or none, makes a
-  JPEG XL URL whose name ends in `.jxl`. The image processor no longer takes an
-  empty format as `orig`: both routes give every request a format, and it
-  refuses a request with none. `auto` still ends with JPEG.
-- 2026-10-08 JPEG XL as an input and output format (part of #222): a source
-  whose bytes start with either JPEG XL signature, the bare codestream's `FF 0A`
-  or the container's, is detected as `image/jxl`, which the upstream fetch
-  accepts; `orig` of such a source is JPEG XL. The format `jxl` works in plain
-  and encrypted URLs and on the generator page, served as `image/jxl` and cached
-  like the other formats. `auto` chooses JPEG XL first when `Accept` names
-  `image/jxl`. govips sends libvips a JPEG XL distance with every save, so
-  libvips ignores the quality: pixa turns `q` into a distance with libvips' own
-  formula, keeping 100 lossy, and removes the metadata from the image before
-  saving, as govips cannot have libvips strip it from JPEG XL. libvips 8.16 and
-  later still write an EXIF block of their own into JPEG XL, from the image's
-  size, orientation and resolution, and fixed values; the image is upright and
-  is given 72 dpi before the save, so the block holds nothing from the source.
-  An image with an ICC profile is converted to sRGB before the JPEG XL save too,
-  and a CMYK image with none is converted to sRGB, as libvips cannot save CMYK
-  as JPEG XL. libvips' default effort, 7, is kept. JPEG XL is not yet the
-  default output.
 - 2026-10-08 pixad runs on the Alpine release it is built on (closes #229): the
   runtime stage of the `Dockerfile` uses `alpine:3.22`, the release of the
   `golang:1.25.4-alpine3.22` image that the test phase and the build stage use,
@@ -794,6 +695,8 @@ P2: security: per-origin rate limiting
 
 # Future Steps
 
+- P2: security
+    - per-origin rate limiting
 - P2: HTTP response handling
     - Last-Modified headers
 - P2: configuration

configs/config.example.yml

@@ -115,14 +115,6 @@ upstream_connections: 64
 # frees up it is answered 503, unless downstream_timeout has ended first.
 # max_concurrent_processing: 4
 
-# How many requests to the image routes (/v1/image/ and /v1/e/) one client
-# may send per minute; a request over the limit is answered 429 with a
-# Retry-After header. 0 turns the limit off. Clients are told apart as for
-# the login limit, so behind a CDN or proxy whose addresses are not in
-# trusted_proxies all requests arriving from one proxy or CDN address count
-# as one client: raise the limit there, or set 0. (default: 600)
-image_requests_per_minute: 600
-
 # Time allowed for one fetch from an upstream host (default: 30s)
 upstream_fetch_timeout: 30s
 

internal/config/config.go

@@ -34,7 +34,6 @@ const (
 	DefaultUpstreamFetchTimeout       = 30 * time.Second
 	DefaultUpstreamMaxResponseSize    = 50 << 20 // 50 MiB
 	DefaultDownstreamTimeout          = 60 * time.Second
-	DefaultImageRequestsPerMinute     = 600
 )
 
 // Configuration key names.
@@ -62,7 +61,6 @@ const (
 	keyUpstreamFetchTimeout       = "upstream_fetch_timeout"
 	keyUpstreamMaxResponseSize    = "upstream_max_response_size"
 	keyDownstreamTimeout          = "downstream_timeout"
-	keyImageRequestsPerMinute     = "image_requests_per_minute"
 )
 
 // placeholderSigningKey is the dummy signing_key shipped in
@@ -160,11 +158,6 @@ type Config struct {
 	// of the per-request timeout middleware.
 	DownstreamTimeout time.Duration
 
-	// ImageRequestsPerMinute is how many requests one client may make to
-	// the image routes per minute; the next is refused with 429 Too Many
-	// Requests. 0 turns the limit off.
-	ImageRequestsPerMinute int
-
 	// BlockedNetworks are operator-supplied CIDR ranges to refuse in
 	// addition to the built-in SSRF blocklist. Enforced by the upstream
 	// fetcher's dialer; the built-in ranges always apply.
@@ -309,8 +302,6 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 			keyAccessControlAllowOrigin, DefaultAccessControlAllowOrigin),
 		DownstreamTimeout: loader.durationVal(
 			keyDownstreamTimeout, DefaultDownstreamTimeout),
-		ImageRequestsPerMinute: loader.intVal(
-			keyImageRequestsPerMinute, DefaultImageRequestsPerMinute),
 		CacheMaxBytes:    loader.int64Val(keyCacheMaxBytes, 0),
 		BlockedNetworks:  blockedNetworks,
 		TrustedProxies:   trustedProxies,
@@ -320,7 +311,9 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 	// The default for an omitted cache_max_bytes is worked out when
 	// the cache opens; here we only record whether the operator set
 	// the key explicitly.
-	_, c.CacheMaxBytesExplicit = lookupValue(sc, keyCacheMaxBytes)
+	if _, present := lookupValue(sc, keyCacheMaxBytes); present {
+		c.CacheMaxBytesExplicit = true
+	}
 
 	// Build DBURL from StateDir if not explicitly set. The derived URL
 	// is a default: it applies only when db_url is omitted, never to an
@@ -433,7 +426,7 @@ func isKnownConfigKey(key string) bool {
 		keyMaxConcurrentProcessing, keyCacheMaxBytes, keyBlockedNetworks,
 		keyTrustedProxies, keyAccessControlAllowOrigin, keyUpstreamFetchTimeout,
 		keyUpstreamMaxResponseSize, keyDownstreamTimeout, keyRefererBlocklist,
-		keyImageRequestsPerMinute, "env":
+		"env":
 		return true
 	}
 
@@ -468,7 +461,6 @@ func envVarNames() map[string]string {
 		keyUpstreamFetchTimeout:       "PIXA_UPSTREAM_FETCH_TIMEOUT",
 		keyUpstreamMaxResponseSize:    "PIXA_UPSTREAM_MAX_RESPONSE_SIZE",
 		keyDownstreamTimeout:          "PIXA_DOWNSTREAM_TIMEOUT",
-		keyImageRequestsPerMinute:     "PIXA_IMAGE_REQUESTS_PER_MINUTE",
 	}
 }
 
@@ -621,14 +613,6 @@ func (c *Config) validate() error {
 			settingName(keyCacheMaxBytes), c.CacheMaxBytes, errMustNotBeNegative)
 	}
 
-	// Zero is valid (it turns the limit off); only negative values are
-	// rejected.
-	if c.ImageRequestsPerMinute < 0 {
-		return fmt.Errorf("%s: value %d %w",
-			settingName(keyImageRequestsPerMinute), c.ImageRequestsPerMinute,
-			errMustNotBeNegative)
-	}
-
 	err = c.validateUpstreamMaxResponseSize()
 	if err != nil {
 		return err
@@ -641,9 +625,12 @@ func (c *Config) validate() error {
 		}
 	}
 
-	err = c.validateSentryDSN()
-	if err != nil {
-		return err
+	if c.SentryDSN != "" {
+		parsed, err := url.Parse(c.SentryDSN)
+		if err != nil || parsed.Scheme == "" || parsed.Host == "" {
+			return fmt.Errorf("%s: value %q is %w",
+				settingName(keySentryDSN), c.SentryDSN, errNotAValidURL)
+		}
 	}
 
 	if (c.MetricsUsername == "") != (c.MetricsPassword == "") {
@@ -655,22 +642,6 @@ func (c *Config) validate() error {
 	return c.validateAccessControlAllowOrigin()
 }
 
-// validateSentryDSN checks that sentry_dsn, when set, is a URL with a scheme
-// and a host.
-func (c *Config) validateSentryDSN() error {
-	if c.SentryDSN == "" {
-		return nil
-	}
-
-	parsed, err := url.Parse(c.SentryDSN)
-	if err != nil || parsed.Scheme == "" || parsed.Host == "" {
-		return fmt.Errorf("%s: value %q is %w",
-			settingName(keySentryDSN), c.SentryDSN, errNotAValidURL)
-	}
-
-	return nil
-}
-
 // validateUpstreamMaxResponseSize checks that upstream_max_response_size
 // is from 1 byte to 1 GiB. An upstream response is read whole into
 // memory, and the image processor reads one byte past this limit, which

internal/config/env_internal_test.go

@@ -70,7 +70,6 @@ func TestEnvironmentSetsEveryKey(t *testing.T) {
 	t.Setenv("PIXA_UPSTREAM_CONNECTIONS_PER_HOST", "5")
 	t.Setenv("PIXA_UPSTREAM_CONNECTIONS", "10")
 	t.Setenv("PIXA_MAX_CONCURRENT_PROCESSING", "3")
-	t.Setenv("PIXA_IMAGE_REQUESTS_PER_MINUTE", "30")
 	t.Setenv("PIXA_CACHE_MAX_BYTES", "1024")
 	t.Setenv("PIXA_BLOCKED_NETWORKS", "203.0.113.0/24")
 	t.Setenv("PIXA_TRUSTED_PROXIES", "192.0.2.0/24")
@@ -100,7 +99,6 @@ func TestEnvironmentSetsEveryKey(t *testing.T) {
 		UpstreamConnectionsPerHost: 5,
 		UpstreamConnections:        10,
 		MaxConcurrentProcessing:    3,
-		ImageRequestsPerMinute:     30,
 		CacheMaxBytes:              1024,
 		CacheMaxBytesExplicit:      true,
 		BlockedNetworks:            []netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")},

internal/config/image_requests_per_minute_internal_test.go

@@ -1,107 +0,0 @@
-package config
-
-import "testing"
-
-// testImageRequestsPerMinuteVar is the variable that sets
-// image_requests_per_minute.
-const testImageRequestsPerMinuteVar = "PIXA_IMAGE_REQUESTS_PER_MINUTE"
-
-// TestImageRequestsPerMinuteValues checks that an omitted
-// image_requests_per_minute is 600, and that 0, which turns the limit off,
-// and any larger whole number are used as given.
-func TestImageRequestsPerMinuteValues(t *testing.T) {
-	t.Parallel()
-
-	c, err := configFromYAML(t, signingKeyLine)
-	if err != nil {
-		t.Fatalf("minimal config should be valid, got error: %v", err)
-	}
-
-	if c.ImageRequestsPerMinute != 600 {
-		t.Errorf("ImageRequestsPerMinute = %d, want 600", c.ImageRequestsPerMinute)
-	}
-
-	explicit := []struct {
-		value string
-		want  int
-	}{
-		{"0", 0},
-		{"30", 30},
-	}
-
-	for _, tc := range explicit {
-		c, err := configFromYAML(t,
-			signingKeyLine+"image_requests_per_minute: "+tc.value+"\n")
-		if err != nil {
-			t.Fatalf("image_requests_per_minute: %s should load, got error: %v",
-				tc.value, err)
-		}
-
-		if c.ImageRequestsPerMinute != tc.want {
-			t.Errorf("ImageRequestsPerMinute = %d, want %d",
-				c.ImageRequestsPerMinute, tc.want)
-		}
-	}
-}
-
-// TestInvalidImageRequestsPerMinuteAbortsStartup checks that a value that is
-// negative, not a whole number, or null aborts startup naming the key and
-// the value, and the variable too where the value could have come from it.
-func TestInvalidImageRequestsPerMinuteAbortsStartup(t *testing.T) {
-	t.Parallel()
-
-	key := keyImageRequestsPerMinute
-
-	runAbortCases(t, []abortCase{
-		{
-			name: "negative",
-			yaml: signingKeyLine + key + ": -1\n",
-			wantErrSubstrings: []string{
-				key, testImageRequestsPerMinuteVar, "value -1",
-			},
-		},
-		{
-			name: "not a number",
-			yaml: signingKeyLine + key + ": plenty\n",
-			wantErrSubstrings: []string{
-				key, testImageRequestsPerMinuteVar, "plenty",
-			},
-		},
-		{
-			name:              "fractional",
-			yaml:              signingKeyLine + key + ": 2.5\n",
-			wantErrSubstrings: []string{key, "2.5"},
-		},
-		{
-			name:              "explicit null",
-			yaml:              signingKeyLine + key + ": null\n",
-			wantErrSubstrings: []string{key, nullValueText},
-		},
-	})
-}
-
-// TestImageRequestsPerMinuteFromEnvironment checks that the variable sets the
-// limit over the config file, and that an invalid value in it aborts startup
-// naming the variable and the value.
-func TestImageRequestsPerMinuteFromEnvironment(t *testing.T) {
-	t.Setenv(testImageRequestsPerMinuteVar, "0")
-
-	c, err := configFromYAML(t, signingKeyLine+"image_requests_per_minute: 30\n")
-	if err != nil {
-		t.Fatalf("limit from the environment should load: %v", err)
-	}
-
-	if c.ImageRequestsPerMinute != 0 {
-		t.Errorf("ImageRequestsPerMinute = %d, want 0 from the environment",
-			c.ImageRequestsPerMinute)
-	}
-
-	for _, value := range []string{"-5", "ten"} {
-		t.Run(value, func(t *testing.T) {
-			t.Setenv(testImageRequestsPerMinuteVar, value)
-
-			_, err := configFromYAML(t, signingKeyLine)
-			wantStartupError(t, err, testImageRequestsPerMinuteVar, value)
-		})
-	}
-}

internal/encurl/encurl.go

@@ -14,7 +14,7 @@ import (
 // Default values for optional fields.
 const (
 	DefaultQuality = 85
-	DefaultFormat  = imgcache.FormatJXL
+	DefaultFormat  = imgcache.FormatOriginal
 	DefaultFitMode = imgcache.FitCover
 
 	// HKDF salt for URL encryption key derivation
@@ -37,7 +37,7 @@ type Payload struct {
 	SourceQuery string               `cbor:"q,omitempty"`  // optional
 	Width       int                  `cbor:"w,omitempty"`  // 0 = original
 	Height      int                  `cbor:"ht,omitempty"` // 0 = original
-	Format      imgcache.ImageFormat `cbor:"f,omitempty"`  // default: jxl
+	Format      imgcache.ImageFormat `cbor:"f,omitempty"`  // default: orig
 	Quality     int                  `cbor:"ql,omitempty"` // default: 85
 	FitMode     imgcache.FitMode     `cbor:"fm,omitempty"` // default: cover
 	ExpiresAt   int64                `cbor:"e,omitempty"`  // 0 = never expires

internal/handlers/auth.go

@@ -369,15 +369,10 @@ func (s *Handlers) buildGeneratedURL(r *http.Request, token, format string) stri
 		scheme = "http"
 	}
 
-	// Determine file extension for the trailing filename. A form with no
-	// format makes a token with none, which is served as encurl.DefaultFormat.
+	// Determine file extension for the trailing filename
 	ext := format
-
-	switch format {
-	case "":
-		ext = string(encurl.DefaultFormat)
-	case "orig", "auto":
-		ext = "jpg"
+	if ext == "" || ext == "orig" || ext == "auto" {
+		ext = "jpg" // Default extension
 	}
 
 	return scheme + "://" + r.Host + "/v1/e/" + url.PathEscape(token) + "/img." + ext

internal/handlers/format_auto.go

@@ -14,8 +14,8 @@ import (
 // Errors for an Accept header that an auto URL cannot be served for.
 var (
 	errInvalidAccept = errors.New("invalid Accept header")
-	errNotAcceptable = errors.New("not acceptable: auto serves " +
-		"image/jxl, image/avif, image/webp or image/jpeg")
+	errNotAcceptable = errors.New(
+		"not acceptable: auto serves image/avif, image/webp or image/jpeg")
 )
 
 // chooseAutoFormat replaces the format auto in req with the format
@@ -51,11 +51,11 @@ func (s *Handlers) chooseAutoFormat(
 }
 
 // formatForAccept returns the format an auto URL is served in for the Accept
-// header accept: JPEG XL when it names image/jxl, else AVIF when it names
-// image/avif, else WebP when it names image/webp, else JPEG when its most
-// specific entry of image/jpeg, image/* and */* allows it, or when it names
-// nothing. A q of 0 refuses a format. JPEG XL, AVIF and WebP must be named, as
-// clients that cannot show them send image/* and */* too.
+// header accept: AVIF when it names image/avif, else WebP when it names
+// image/webp, else JPEG when its most specific entry of image/jpeg, image/*
+// and */* allows it, or when it names nothing. A q of 0 refuses a format.
+// AVIF and WebP must be named, as clients that cannot show them send image/*
+// and */* too.
 func formatForAccept(accept string) (imgcache.ImageFormat, error) {
 	qualities, err := parseAccept(accept)
 	if err != nil {
@@ -66,10 +66,6 @@ func formatForAccept(accept string) (imgcache.ImageFormat, error) {
 		return imgcache.FormatJPEG, nil
 	}
 
-	if qualities["image/jxl"] > 0 {
-		return imgcache.FormatJXL, nil
-	}
-
 	if qualities["image/avif"] > 0 {
 		return imgcache.FormatAVIF, nil
 	}

internal/handlers/handlers.go

@@ -4,7 +4,6 @@ package handlers
 import (
 	"context"
 	"encoding/json"
-	"errors"
 	"log/slog"
 	"net/http"
 	"time"
@@ -72,21 +71,16 @@ func New(lc fx.Lifecycle, params Params) (*Handlers, error) {
 	}
 
 	lc.Append(fx.Hook{
-		//nolint:contextcheck // the cache's goroutines outlive OnStart; OnStop stops them
+		//nolint:contextcheck // the eviction loop outlives OnStart; OnStop cancels it
 		OnStart: func(_ context.Context) error {
 			return s.initImageService()
 		},
-		// The pending counts are written here, before the database's stop
-		// hook closes it.
 		OnStop: func(ctx context.Context) error {
 			if s.imgCache == nil {
 				return nil
 			}
 
-			return errors.Join(
-				s.imgCache.StopEviction(ctx),
-				s.imgCache.StopPendingCountWrites(ctx),
-			)
+			return s.imgCache.StopEviction(ctx)
 		},
 	})
 
@@ -106,6 +100,7 @@ func (s *Handlers) WaitForProcessing(ctx context.Context) int {
 func newCacheConfig(cfg *config.Config, log *slog.Logger) imgcache.CacheConfig {
 	return imgcache.CacheConfig{
 		StateDir:           cfg.StateDir,
+		CacheTTL:           imgcache.DefaultCacheTTL,
 		NegativeTTL:        imgcache.DefaultNegativeTTL,
 		MaxBytes:           cfg.CacheMaxBytes,
 		UseDefaultMaxBytes: !cfg.CacheMaxBytesExplicit,
@@ -127,9 +122,6 @@ func (s *Handlers) initImageService() error {
 	// write-pressure passes. No-op when the disk cache is disabled.
 	cache.StartEviction(imgcache.DefaultEvictionInterval)
 
-	// Writes the counts requests could not write by their deadline
-	cache.StartPendingCountWrites()
-
 	// Create the fetcher config
 	fetcherCfg := httpfetcher.DefaultConfig()
 	fetcherCfg.AllowHTTP = s.config.AllowHTTP

internal/handlers/handlers_internal_test.go

@@ -47,6 +47,7 @@ func setupTestHandler(t *testing.T) *testFixtures {
 
 	cache, err := imgcache.NewCache(db, imgcache.CacheConfig{
 		StateDir:    tmpDir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {

internal/handlers/image.go

@@ -18,8 +18,7 @@ import (
 )
 
 // HandleImage handles the main image proxy route:
-// /v1/image/<host>/<path>/<width>x<height>.<format>, or with no format
-// /v1/image/<host>/<path>/<width>x<height>
+// /v1/image/<host>/<path>/<width>x<height>.<format>
 func (s *Handlers) HandleImage() http.HandlerFunc {
 	return func(w http.ResponseWriter, r *http.Request) {
 		if s.refuseBlockedReferer(w, r) {
@@ -206,16 +205,6 @@ func parseExpires(query url.Values) (time.Time, error) {
 	return time.Unix(exp, 0), nil
 }
 
-// HandleTooManyRequests answers 429 Too Many Requests with the JSON error
-// body the image routes send for their other errors. The image routes' rate
-// limit calls it for a request over the limit.
-func (s *Handlers) HandleTooManyRequests() http.HandlerFunc {
-	return func(w http.ResponseWriter, _ *http.Request) {
-		s.respondError(w, "too many requests, try again later",
-			http.StatusTooManyRequests)
-	}
-}
-
 // respondImageError maps image retrieval errors to HTTP responses.
 func (s *Handlers) respondImageError(
 	w http.ResponseWriter, req *imgcache.ImageRequest, err error,
@@ -247,22 +236,6 @@ func (s *Handlers) respondImageError(
 		return
 	}
 
-	if errors.Is(err, httpfetcher.ErrInvalidContentType) ||
-		errors.Is(err, imageprocessor.ErrUnsupportedInputFormat) {
-		s.respondError(w, "unsupported source format",
-			http.StatusUnsupportedMediaType)
-
-		return
-	}
-
-	if errors.Is(err, imageprocessor.ErrOutputTooLarge) {
-		s.respondError(w, fmt.Sprintf("size too large for the source: the side "+
-			"computed from its proportions is above %d",
-			imageprocessor.MaxOutputDimension), http.StatusBadRequest)
-
-		return
-	}
-
 	s.respondError(w, "internal error", http.StatusInternalServerError)
 }
 

internal/handlers/image_cache_control_internal_test.go

@@ -31,6 +31,7 @@ func newSignedHostServer(
 
 	cache, err := imgcache.NewCache(setupTestDB(t), imgcache.CacheConfig{
 		StateDir:    t.TempDir(),
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {

internal/handlers/image_errors_internal_test.go

@@ -29,6 +29,7 @@ func newImageRoute(t *testing.T, fetcher httpfetcher.Fetcher) http.Handler {
 
 	cache, err := imgcache.NewCache(setupTestDB(t), imgcache.CacheConfig{
 		StateDir:    t.TempDir(),
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {

internal/handlers/imageenc.go

@@ -161,14 +161,6 @@ func (s *Handlers) handleImageError(w http.ResponseWriter, err error) {
 		errors.Is(err, imageprocessor.ErrTooManyImages):
 		s.respondError(w, "server busy, try again later",
 			http.StatusServiceUnavailable)
-	case errors.Is(err, httpfetcher.ErrInvalidContentType),
-		errors.Is(err, imageprocessor.ErrUnsupportedInputFormat):
-		s.respondError(w, "unsupported source format",
-			http.StatusUnsupportedMediaType)
-	case errors.Is(err, imageprocessor.ErrOutputTooLarge):
-		s.respondError(w, fmt.Sprintf("size too large for the source: the side "+
-			"computed from its proportions is above %d",
-			imageprocessor.MaxOutputDimension), http.StatusBadRequest)
 	default:
 		s.log.Error("image request failed", "error", err)
 		s.respondError(w, "internal error", http.StatusInternalServerError)

internal/handlers/jpegxl_default_internal_test.go

@@ -1,162 +0,0 @@
-package handlers
-
-import (
-	"fmt"
-	"log/slog"
-	"maps"
-	"net/http"
-	"net/http/httptest"
-	"net/url"
-	"strings"
-	"testing"
-	"time"
-
-	"github.com/davidbyttow/govips/v2/vips"
-
-	"sneak.berlin/go/pixa/internal/encurl"
-	"sneak.berlin/go/pixa/internal/imgcache"
-	"sneak.berlin/go/pixa/internal/signature"
-)
-
-// requireJPEGXL requires that rec answers 200 with a JPEG XL image.
-func requireJPEGXL(t *testing.T, rec *httptest.ResponseRecorder) {
-	t.Helper()
-
-	if rec.Code != http.StatusOK {
-		t.Fatalf("status = %d, want %d; body %q",
-			rec.Code, http.StatusOK, rec.Body.String())
-	}
-
-	if got := rec.Header().Get("Content-Type"); got != jxlType {
-		t.Errorf("Content-Type = %q, want %s", got, jxlType)
-	}
-
-	if got := vips.DetermineImageType(rec.Body.Bytes()); got != vips.ImageTypeJXL {
-		t.Errorf("body is %s, want jxl", vips.ImageTypes[got])
-	}
-}
-
-// TestImageWithoutFormat_ServesJPEGXL verifies that a /v1/image/ URL whose
-// last segment is a size with no format, 50x50 or orig, answers JPEG XL.
-func TestImageWithoutFormat_ServesJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	route := newImageRoute(t, newPhotoFetcher(t, allowlistedHost))
-
-	for _, size := range []string{"50x50", "orig"} {
-		target := "/v1/image/" + allowlistedHost + photoPath + "/" + size
-		requireJPEGXL(t, sendGet(t, route, target))
-	}
-}
-
-// TestImageWithoutFormat_SignedAsJXL verifies that a /v1/image/ URL with no
-// format is signed as jxl: the signature made for the URL ending in .jxl is
-// accepted for the same URL without .jxl.
-func TestImageWithoutFormat_SignedAsJXL(t *testing.T) {
-	t.Parallel()
-
-	route := newImageRoute(t, newPhotoFetcher(t, signedHost))
-	expires := time.Now().Add(time.Hour)
-
-	sig := signature.New(testSigningKey).Sign(&signature.Request{
-		SourceHost: signedHost,
-		SourcePath: photoPath,
-		Width:      50,
-		Height:     50,
-		Format:     string(imgcache.FormatJXL),
-		Quality:    encurl.DefaultQuality,
-		FitMode:    string(imgcache.FitCover),
-		Expires:    expires,
-	})
-	query := fmt.Sprintf("?sig=%s&exp=%d", sig, expires.Unix())
-
-	for _, size := range []string{"50x50.jxl", "50x50"} {
-		target := "/v1/image/" + signedHost + photoPath + "/" + size + query
-		requireJPEGXL(t, sendGet(t, route, target))
-	}
-}
-
-// TestImageEncWithoutFormat_ServesJPEGXL verifies that an encrypted URL whose
-// token holds no format answers JPEG XL.
-func TestImageEncWithoutFormat_ServesJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	h, srv := newSignedHostServer(t, slog.New(slog.DiscardHandler))
-
-	token, err := h.encGen.Generate(&encurl.Payload{
-		SourceHost: signedHost,
-		SourcePath: photoPath,
-		Width:      50,
-		Height:     50,
-	})
-	if err != nil {
-		t.Fatalf("Generate() error = %v", err)
-	}
-
-	requireJPEGXL(t, getEncToken(srv, token))
-}
-
-// TestGeneratorPage_SelectsJPEGXL verifies that the generator page's format
-// choice is JPEG XL until another is chosen.
-func TestGeneratorPage_SelectsJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	h, srv := newCSRFTestRouter(t)
-
-	req := httptest.NewRequestWithContext(t.Context(), http.MethodGet, "/", nil)
-	req.AddCookie(newSessionCookie(t, h))
-
-	rec := httptest.NewRecorder()
-	srv.ServeHTTP(rec, req)
-
-	if !strings.Contains(rec.Body.String(), `<option value="jxl" selected>`) {
-		t.Errorf("generator page does not select JPEG XL: %s", rec.Body.String())
-	}
-}
-
-// TestGeneratePost_NoFormat_MakesJPEGXLURL verifies that the generator form
-// sent with an empty format field, or with none, makes a URL whose name ends
-// in .jxl and which answers JPEG XL.
-func TestGeneratePost_NoFormat_MakesJPEGXLURL(t *testing.T) {
-	t.Parallel()
-
-	photo := url.Values{
-		sourceURLField: {"https://" + signedHost + photoPath},
-		widthField:     {"50"},
-		heightField:    {"50"},
-	}
-
-	emptyFormat := maps.Clone(photo)
-	emptyFormat.Set(formatField, "")
-
-	for name, form := range map[string]url.Values{
-		"empty format field": emptyFormat,
-		"no format field":    photo,
-	} {
-		t.Run(name, func(t *testing.T) {
-			t.Parallel()
-
-			_, imageSrv := newSignedHostServer(t, slog.New(slog.DiscardHandler))
-
-			rec := generatePost(t, form)
-
-			match := generatedURLPattern.FindStringSubmatch(rec.Body.String())
-			if match == nil {
-				t.Fatalf("generator page shows no URL: %d %s",
-					rec.Code, rec.Body.String())
-			}
-
-			t.Logf("generated URL path: %s", match[1])
-
-			if !strings.HasSuffix(match[1], "/img.jxl") {
-				t.Errorf("generated URL %s does not end in /img.jxl", match[1])
-			}
-
-			imageRec := httptest.NewRecorder()
-			imageSrv.ServeHTTP(imageRec, httptest.NewRequestWithContext(
-				t.Context(), http.MethodGet, match[1], nil))
-
-			requireJPEGXL(t, imageRec)
-		})
-	}
-}

internal/handlers/jpegxl_internal_test.go

@@ -1,73 +0,0 @@
-package handlers
-
-import (
-	"log/slog"
-	"net/http"
-	"testing"
-
-	"github.com/davidbyttow/govips/v2/vips"
-
-	"sneak.berlin/go/pixa/internal/imgcache"
-)
-
-// jxlType is the content type of JPEG XL.
-const jxlType = "image/jxl"
-
-// TestFormatForAccept_JPEGXL verifies that the format auto chooses JPEG XL
-// when Accept names image/jxl, ahead of AVIF whatever their q, and AVIF when
-// Accept refuses JPEG XL with q=0.
-func TestFormatForAccept_JPEGXL(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name   string
-		accept string
-		want   imgcache.ImageFormat
-	}{
-		{"JPEG XL-capable browser",
-			"image/jxl,image/avif,image/webp,image/*,*/*;q=0.8", imgcache.FormatJXL},
-		{"JPEG XL only", jxlType, imgcache.FormatJXL},
-		{"JPEG XL with a lower q than AVIF", "image/avif,image/jxl;q=0.5",
-			imgcache.FormatJXL},
-		{"q=0 on JPEG XL", "image/jxl;q=0,image/avif,*/*", imgcache.FormatAVIF},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			got, err := formatForAccept(tt.accept)
-			if got != tt.want || err != nil {
-				t.Errorf("formatForAccept(%q) = %q, %v, want %q",
-					tt.accept, got, err, tt.want)
-			}
-		})
-	}
-}
-
-// TestFormatAuto_JPEGXL requests an auto URL on each image route with an
-// Accept header that names image/jxl, and checks that the answer is a JPEG XL
-// image.
-func TestFormatAuto_JPEGXL(t *testing.T) {
-	t.Parallel()
-
-	h, srv := newSignedHostServer(t, slog.New(slog.DiscardHandler))
-	signedURL, encryptedURL := autoPhotoURLs(t, h)
-
-	for _, target := range []string{signedURL, encryptedURL} {
-		rec := requestImage(t, srv, http.MethodGet, target,
-			"image/jxl,image/avif,image/webp,*/*;q=0.8")
-		gotType := rec.Header().Get("Content-Type")
-
-		if rec.Code != http.StatusOK || gotType != jxlType {
-			t.Errorf("%s: %d %s, want 200 %s; body %s",
-				target, rec.Code, gotType, jxlType, rec.Body)
-
-			continue
-		}
-
-		if got := vips.DetermineImageType(rec.Body.Bytes()); got != vips.ImageTypeJXL {
-			t.Errorf("%s: body is %s, want jxl", target, vips.ImageTypes[got])
-		}
-	}
-}

internal/handlers/referer_blocklist_internal_test.go

@@ -49,6 +49,7 @@ func newRefererRoutes(t *testing.T) (http.Handler, *Handlers, *countingFetcher)
 
 	cache, err := imgcache.NewCache(setupTestDB(t), imgcache.CacheConfig{
 		StateDir:    t.TempDir(),
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {

internal/handlers/unsupported_source_internal_test.go

@@ -1,54 +0,0 @@
-package handlers
-
-import (
-	"fmt"
-	"log/slog"
-	"net/http"
-	"net/http/httptest"
-	"strings"
-	"testing"
-
-	"sneak.berlin/go/pixa/internal/httpfetcher"
-	"sneak.berlin/go/pixa/internal/imageprocessor"
-	"sneak.berlin/go/pixa/internal/imgcache"
-)
-
-// TestUnsupportedSourceFormatAnswers415 checks that both image routes answer
-// 415 with a clear error when the upstream answers with a content type pixa
-// does not accept, such as SVG, and when orig is asked of a source in a
-// format the processor cannot name, wrapped as the service wraps them.
-func TestUnsupportedSourceFormatAnswers415(t *testing.T) {
-	t.Parallel()
-
-	h := &Handlers{log: slog.New(slog.DiscardHandler)}
-	req := &imgcache.ImageRequest{SourceHost: "img.example.com", SourcePath: "/a.svg"}
-
-	for _, err := range []error{
-		fmt.Errorf("upstream fetch failed: %w: image/svg+xml",
-			httpfetcher.ErrInvalidContentType),
-		fmt.Errorf("image processing failed: %w: unknown",
-			imageprocessor.ErrUnsupportedInputFormat),
-	} {
-		plain := httptest.NewRecorder()
-		h.respondImageError(plain, req, err)
-
-		encrypted := httptest.NewRecorder()
-		h.handleImageError(encrypted, err)
-
-		for route, rec := range map[string]*httptest.ResponseRecorder{
-			"HandleImage": plain, "HandleImageEnc": encrypted,
-		} {
-			t.Logf("%s for %v: %d %s", route, err, rec.Code, rec.Body.String())
-
-			if rec.Code != http.StatusUnsupportedMediaType {
-				t.Errorf("%s for %v: status = %d, want %d",
-					route, err, rec.Code, http.StatusUnsupportedMediaType)
-			}
-
-			if !strings.Contains(rec.Body.String(), "unsupported source format") {
-				t.Errorf("%s for %v: body = %q, want the unsupported source format error",
-					route, err, rec.Body.String())
-			}
-		}
-	}
-}

internal/httpfetcher/httpfetcher.go

@@ -45,7 +45,6 @@ const (
 	contentTypeGIF         = "image/gif"
 	contentTypeWebP        = "image/webp"
 	contentTypeAVIF        = "image/avif"
-	contentTypeJXL         = "image/jxl"
 	contentTypeSVG         = "image/svg+xml"
 	contentTypeOctetStream = "application/octet-stream"
 )
@@ -157,7 +156,7 @@ func DefaultConfig() *Config {
 			contentTypeGIF,
 			contentTypeWebP,
 			contentTypeAVIF,
-			contentTypeJXL,
+			contentTypeSVG,
 		},
 		AllowHTTP:             false,
 		MaxConnectionsPerHost: DefaultMaxConnectionsPerHost,

internal/httpfetcher/jpegxl_internal_test.go

@@ -1,20 +0,0 @@
-package httpfetcher
-
-import "testing"
-
-// TestJPEGXLContentType verifies that the fetcher accepts an upstream answer
-// of type image/jxl by default, and that the mock fetcher serves a .jxl file
-// as image/jxl.
-func TestJPEGXLContentType(t *testing.T) {
-	t.Parallel()
-
-	const jxlType = "image/jxl"
-
-	if !New(DefaultConfig()).isAllowedContentType(jxlType) {
-		t.Errorf("isAllowedContentType(%q) = false, want true", jxlType)
-	}
-
-	if got := detectContentTypeFromPath("images/photo.jxl"); got != jxlType {
-		t.Errorf("detectContentTypeFromPath(photo.jxl) = %q, want %q", got, jxlType)
-	}
-}

internal/httpfetcher/mock.go

@@ -109,8 +109,6 @@ func detectContentTypeFromPath(path string) string {
 		return contentTypeWebP
 	case strings.HasSuffix(path, ".avif"):
 		return contentTypeAVIF
-	case strings.HasSuffix(path, ".jxl"):
-		return contentTypeJXL
 	case strings.HasSuffix(path, ".svg"):
 		return contentTypeSVG
 	default:

internal/imageprocessor/computed_side_internal_test.go

@@ -1,52 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"errors"
-	"testing"
-)
-
-// TestImageProcessor_RefusesComputedSideAboveMaximum verifies that a size
-// with one side 0, which Process computes from the input's proportions, is
-// served when that side comes out at MaxOutputDimension and refused with
-// ErrOutputTooLarge when it would be above. A 4096x1 or 1x4096 input given
-// 2 for its short side has 8192 for its long side.
-func TestImageProcessor_RefusesComputedSideAboveMaximum(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name                    string
-		inputWidth, inputHeight int
-		size                    Size
-		wantErr                 error
-	}{
-		{"width at the maximum", 4096, 1, Size{Height: 2}, nil},
-		{"width above the maximum", 4096, 1, Size{Height: 3}, ErrOutputTooLarge},
-		{"height at the maximum", 1, 4096, Size{Width: 2}, nil},
-		{"height above the maximum", 1, 4096, Size{Width: 3}, ErrOutputTooLarge},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			input := createTestJPEG(t, tt.inputWidth, tt.inputHeight)
-
-			result, err := New(Params{}).Process(t.Context(),
-				bytes.NewReader(input),
-				&Request{Size: tt.size, Format: FormatJPEG, FitMode: FitCover})
-			if result != nil {
-				t.Logf("Process() made %dx%d", result.Width, result.Height)
-
-				if max(result.Width, result.Height) != MaxOutputDimension {
-					t.Errorf("Process() made %dx%d, want a side of %d",
-						result.Width, result.Height, MaxOutputDimension)
-				}
-			}
-
-			if !errors.Is(err, tt.wantErr) {
-				t.Errorf("Process() error = %v, want %v", err, tt.wantErr)
-			}
-		})
-	}
-}

internal/imageprocessor/empty_format_internal_test.go

@@ -1,21 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"errors"
-	"testing"
-)
-
-// TestImageProcessor_EmptyFormatRefused verifies that a request with no format
-// is refused, as both image routes give every request a format before it is
-// processed.
-func TestImageProcessor_EmptyFormatRefused(t *testing.T) {
-	t.Parallel()
-
-	_, err := New(Params{}).Process(
-		t.Context(), bytes.NewReader(createTestJPEG(t, 20, 20)), &Request{},
-	)
-	if !errors.Is(err, ErrUnsupportedOutputFormat) {
-		t.Errorf("Process() error = %v, want %v", err, ErrUnsupportedOutputFormat)
-	}
-}

internal/imageprocessor/encoder_settings_internal_test.go

@@ -1,145 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"image"
-	"image/color"
-	"image/png"
-	"testing"
-
-	"github.com/davidbyttow/govips/v2/vips"
-)
-
-// processedSize runs input through Process and returns the output's size in
-// bytes.
-func processedSize(t *testing.T, input []byte, req *Request) int64 {
-	t.Helper()
-
-	result, err := New(Params{}).Process(t.Context(), bytes.NewReader(input), req)
-	if err != nil {
-		t.Fatalf("Process() error = %v", err)
-	}
-
-	_ = result.Content.Close()
-
-	return result.ContentLength
-}
-
-// encodePNG encodes img as PNG with Go's encoder.
-func encodePNG(t *testing.T, img image.Image) []byte {
-	t.Helper()
-
-	var buf bytes.Buffer
-
-	err := png.Encode(&buf, img)
-	if err != nil {
-		t.Fatalf("failed to encode test PNG: %v", err)
-	}
-
-	return buf.Bytes()
-}
-
-// decode decodes input with vips, as Process does.
-func decode(t *testing.T, input []byte) *vips.ImageRef {
-	t.Helper()
-
-	img, err := vips.NewImageFromBuffer(input)
-	if err != nil {
-		t.Fatalf("failed to decode input: %v", err)
-	}
-
-	t.Cleanup(img.Close)
-
-	return img
-}
-
-// TestImageProcessor_PNGIsCompressed verifies that a PNG output is
-// compressed: a flat 200x150 image, 90,000 bytes of raw pixels, comes out at
-// a small fraction of that.
-func TestImageProcessor_PNGIsCompressed(t *testing.T) {
-	t.Parallel()
-
-	const width, height = 200, 150
-
-	flat := image.NewRGBA(image.Rect(0, 0, width, height))
-	for y := range height {
-		for x := range width {
-			flat.Set(x, y, color.RGBA{R: 40, G: 120, B: 200, A: 255})
-		}
-	}
-
-	size := processedSize(t, encodePNG(t, flat), &Request{Format: FormatPNG})
-
-	const rawBytes = width * height * 3
-	if size > rawBytes/10 {
-		t.Errorf("PNG output is %d bytes, want under a tenth of its %d raw",
-			size, rawBytes)
-	}
-}
-
-// TestImageProcessor_WebPAtDefaultEffort verifies that WebP is saved at
-// libvips' default effort, 4: the output is the size of the same image saved
-// at that effort.
-func TestImageProcessor_WebPAtDefaultEffort(t *testing.T) {
-	t.Parallel()
-
-	input := createTestJPEG(t, 200, 150)
-
-	size := processedSize(t, input, &Request{Format: FormatWebP, Quality: 85})
-
-	want, _, err := decode(t, input).ExportWebp(&vips.WebpExportParams{
-		StripMetadata:   true,
-		Quality:         85,
-		ReductionEffort: 4,
-	})
-	if err != nil {
-		t.Fatalf("ExportWebp() error = %v", err)
-	}
-
-	if size != int64(len(want)) {
-		t.Errorf("WebP output is %d bytes, want %d, the size at effort 4",
-			size, len(want))
-	}
-}
-
-// TestImageProcessor_AVIFAtEffort1 verifies that AVIF is saved at effort 1
-// with 8 bits per sample: the output is the size of the same image saved
-// with those settings. The source is 16-bit, which libvips saves with 12
-// bits when it is not given a bit depth, and 640x480: on a small image,
-// such as 64x48, efforts 1 and 2 give the same output.
-func TestImageProcessor_AVIFAtEffort1(t *testing.T) {
-	t.Parallel()
-
-	const width, height = 640, 480
-
-	source := image.NewRGBA64(image.Rect(0, 0, width, height))
-	for y := range height {
-		for x := range width {
-			source.Set(x, y, color.RGBA64{
-				R: uint16((x * 65535 / width) & 0xffff),
-				G: uint16((y * 65535 / height) & 0xffff),
-				B: 32768,
-				A: 65535,
-			})
-		}
-	}
-
-	input := encodePNG(t, source)
-
-	size := processedSize(t, input, &Request{Format: FormatAVIF, Quality: 85})
-
-	want, _, err := decode(t, input).ExportAvif(&vips.AvifExportParams{
-		StripMetadata: true,
-		Quality:       85,
-		Effort:        1,
-		Bitdepth:      8,
-	})
-	if err != nil {
-		t.Fatalf("ExportAvif() error = %v", err)
-	}
-
-	if size != int64(len(want)) {
-		t.Errorf("AVIF output is %d bytes, want %d, the size at effort 1 "+
-			"and 8 bits", size, len(want))
-	}
-}

internal/imageprocessor/fit_outside_internal_test.go

@@ -1,62 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"errors"
-	"testing"
-)
-
-// TestImageProcessor_RefusesFitOutsideAboveMaximum verifies that FitOutside,
-// which scales the input to cover the requested size and so past it on one
-// side, is refused with ErrOutputTooLarge when that side would come out above
-// MaxOutputDimension, and otherwise makes the scaled size. A 1024x256 or
-// 256x1024 input scaled by 8 has 8192 for its long side.
-func TestImageProcessor_RefusesFitOutsideAboveMaximum(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name                    string
-		inputWidth, inputHeight int
-		size                    Size
-		// wantWidth and wantHeight are the output's, 0 for a refusal
-		wantWidth, wantHeight int
-	}{
-		{"width above the maximum", 3000, 600, Size{Width: 1, Height: 8192}, 0, 0},
-		{"height above the maximum", 600, 3000, Size{Width: 8192, Height: 1}, 0, 0},
-		{"width at the maximum", 1024, 256, Size{Width: 1, Height: 2048}, 8192, 2048},
-		{"height at the maximum", 256, 1024, Size{Width: 2048, Height: 1}, 2048, 8192},
-		{"within the maximum", 3000, 600, Size{Width: 1, Height: 1200}, 6000, 1200},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			input := createTestJPEG(t, tt.inputWidth, tt.inputHeight)
-
-			result, err := New(Params{}).Process(t.Context(),
-				bytes.NewReader(input),
-				&Request{Size: tt.size, Format: FormatJPEG, FitMode: FitOutside})
-			if result != nil {
-				t.Logf("Process() made %dx%d", result.Width, result.Height)
-			}
-
-			if tt.wantWidth == 0 {
-				if !errors.Is(err, ErrOutputTooLarge) {
-					t.Errorf("Process() error = %v, want %v", err, ErrOutputTooLarge)
-				}
-
-				return
-			}
-
-			if err != nil {
-				t.Fatalf("Process() error = %v", err)
-			}
-
-			if result.Width != tt.wantWidth || result.Height != tt.wantHeight {
-				t.Errorf("Process() made %dx%d, want %dx%d",
-					result.Width, result.Height, tt.wantWidth, tt.wantHeight)
-			}
-		})
-	}
-}

internal/imageprocessor/imageprocessor.go

@@ -65,7 +65,6 @@ const (
 	FormatPNG      Format = "png"
 	FormatWebP     Format = "webp"
 	FormatAVIF     Format = "avif"
-	FormatJXL      Format = "jxl"
 	FormatGIF      Format = "gif"
 )
 
@@ -133,26 +132,10 @@ var ErrInputTooLarge = errors.New("input image dimensions exceed maximum")
 // configured byte limit.
 var ErrInputDataTooLarge = errors.New("input data exceeds maximum allowed size")
 
-// MaxOutputDimension is the maximum width or height of an output image, and
-// so of a requested size (imgcache.MaxDimension).
-const MaxOutputDimension = 8192
-
-// ErrOutputTooLarge is returned, before resizing, when the output would have a
-// side above MaxOutputDimension: the side of a size with one side 0, computed
-// from the input's proportions, or with FitOutside, the side scaled past the
-// requested size.
-var ErrOutputTooLarge = errors.New("output image dimensions exceed maximum")
-
 // ErrUnsupportedOutputFormat is returned when the requested output format is
 // not supported.
 var ErrUnsupportedOutputFormat = errors.New("unsupported output format")
 
-// ErrUnsupportedInputFormat is returned, before the input is decoded, when
-// libvips reads the input's first bytes as another format than the source
-// formats, or as none: for example an SVG whose first bytes pass the
-// first-bytes check for AVIF.
-var ErrUnsupportedInputFormat = errors.New("unsupported input format")
-
 // ErrTooManyImages is returned when MaxConcurrentProcessing images are being
 // processed and none finishes within ProcessingWaitTimeout.
 var ErrTooManyImages = errors.New("too many images being processed at once")
@@ -235,17 +218,6 @@ func (p *ImageProcessor) Process(
 		return nil, ErrInputDataTooLarge
 	}
 
-	// govips picks the libvips loader from the input's first bytes with
-	// DetermineImageType. Input whose first bytes it reads as no source
-	// format, such as SVG, which librsvg would render, is refused before
-	// libvips reads it.
-	inputFormat := p.detectFormat(vips.DetermineImageType(data))
-
-	sourceFormat, err := p.formatFromString(inputFormat)
-	if err != nil {
-		return nil, err
-	}
-
 	// Decode image
 	img, err := vips.NewImageFromBuffer(data)
 	if err != nil {
@@ -264,16 +236,16 @@ func (p *ImageProcessor) Process(
 	origWidth := img.Width()
 	origHeight := img.Height()
 
+	// Detect input format
+	inputFormat := p.detectFormat(img)
+
 	// Validate input dimensions to prevent DoS via decompression bombs
 	if origWidth > MaxInputDimension || origHeight > MaxInputDimension {
 		return nil, ErrInputTooLarge
 	}
 
-	// Determine target dimensions; too large ones are refused before resizing
-	targetWidth, targetHeight, err := targetDimensions(req.Size, origWidth, origHeight)
-	if err != nil {
-		return nil, err
-	}
+	// Determine target dimensions
+	targetWidth, targetHeight := targetDimensions(req.Size, origWidth, origHeight)
 
 	// Resize if needed
 	if targetWidth != origWidth || targetHeight != origHeight {
@@ -283,10 +255,10 @@ func (p *ImageProcessor) Process(
 		}
 	}
 
-	// orig is the source's own format; encode refuses an empty format
+	// Determine output format
 	outputFormat := req.Format
-	if outputFormat == FormatOriginal {
-		outputFormat = sourceFormat
+	if outputFormat == FormatOriginal || outputFormat == "" {
+		outputFormat = p.formatFromString(inputFormat)
 	}
 
 	// Encode to target format
@@ -309,29 +281,21 @@ func (p *ImageProcessor) Process(
 
 // targetDimensions calculates the output dimensions for a requested size,
 // scaling proportionally when only one dimension is given and keeping the
-// original dimensions when both are zero. A side scaled proportionally can
-// come out above MaxOutputDimension, which is ErrOutputTooLarge.
-func targetDimensions(size Size, origWidth, origHeight int) (int, int, error) {
-	width, height := size.Width, size.Height
-
+// original dimensions when both are zero.
+func targetDimensions(size Size, origWidth, origHeight int) (int, int) {
 	switch {
-	case width == 0 && height == 0:
+	case size.Width == 0 && size.Height == 0:
 		// Both are 0: keep original size
-		return origWidth, origHeight, nil
-	case width == 0:
+		return origWidth, origHeight
+	case size.Width == 0:
 		// Only height specified: calculate width proportionally
-		width = origWidth * height / origHeight
-	case height == 0:
+		return origWidth * size.Height / origHeight, size.Height
+	case size.Height == 0:
 		// Only width specified: calculate height proportionally
-		height = origHeight * width / origWidth
+		return size.Width, origHeight * size.Width / origWidth
+	default:
+		return size.Width, size.Height
 	}
-
-	if width > MaxOutputDimension || height > MaxOutputDimension {
-		return 0, 0, fmt.Errorf("%w: %dx%d is above %d", ErrOutputTooLarge,
-			width, height, MaxOutputDimension)
-	}
-
-	return width, height, nil
 }
 
 // MIME types for the supported image formats.
@@ -341,7 +305,6 @@ const (
 	mimeGIF  = "image/gif"
 	mimeWebP = "image/webp"
 	mimeAVIF = "image/avif"
-	mimeJXL  = "image/jxl"
 )
 
 // SupportedInputFormats returns MIME types this processor can read.
@@ -352,7 +315,6 @@ func (p *ImageProcessor) SupportedInputFormats() []string {
 		mimeGIF,
 		mimeWebP,
 		mimeAVIF,
-		mimeJXL,
 	}
 }
 
@@ -364,7 +326,6 @@ func (p *ImageProcessor) SupportedOutputFormats() []Format {
 		FormatGIF,
 		FormatWebP,
 		FormatAVIF,
-		FormatJXL,
 	}
 }
 
@@ -381,8 +342,6 @@ func FormatToMIME(format Format) string {
 		return mimeGIF
 	case FormatAVIF:
 		return mimeAVIF
-	case FormatJXL:
-		return mimeJXL
 	case FormatOriginal:
 		return "application/octet-stream"
 	default:
@@ -438,9 +397,10 @@ func (p *ImageProcessor) acquireSlot(ctx context.Context) (func(), error) {
 	}
 }
 
-// detectFormat returns the format string for a govips image type.
-func (p *ImageProcessor) detectFormat(imageType vips.ImageType) string {
-	switch imageType {
+// detectFormat returns the format string from a vips image.
+func (p *ImageProcessor) detectFormat(img *vips.ImageRef) string {
+	format := img.Format()
+	switch format {
 	case vips.ImageTypeJPEG:
 		return "jpeg"
 	case vips.ImageTypePNG:
@@ -451,20 +411,16 @@ func (p *ImageProcessor) detectFormat(imageType vips.ImageType) string {
 		return "webp"
 	case vips.ImageTypeAVIF, vips.ImageTypeHEIF:
 		return string(FormatAVIF)
-	case vips.ImageTypeJXL:
-		return string(FormatJXL)
 	case vips.ImageTypeUnknown, vips.ImageTypeMagick, vips.ImageTypePDF,
 		vips.ImageTypeSVG, vips.ImageTypeTIFF, vips.ImageTypeBMP,
-		vips.ImageTypeJP2K:
+		vips.ImageTypeJP2K, vips.ImageTypeJXL:
 		return "unknown"
 	default:
 		return "unknown"
 	}
 }
 
-// resize resizes the image according to the fit mode. With FitOutside one
-// side can come out larger than requested; when it would be above
-// MaxOutputDimension, resize returns ErrOutputTooLarge without resizing.
+// resize resizes the image according to the fit mode.
 func (p *ImageProcessor) resize(
 	img *vips.ImageRef, width, height int, fit FitMode,
 ) error {
@@ -512,12 +468,6 @@ func (p *ImageProcessor) resize(
 		newW := int(float64(imgW) * scale)
 		newH := int(float64(imgH) * scale)
 
-		// The dimension that exceeds the target is held to the maximum too
-		if newW > MaxOutputDimension || newH > MaxOutputDimension {
-			return fmt.Errorf("%w: %dx%d is above %d", ErrOutputTooLarge,
-				newW, newH, MaxOutputDimension)
-		}
-
 		return img.Thumbnail(newW, newH, vips.InterestingNone)
 
 	default:
@@ -535,6 +485,44 @@ func (p *ImageProcessor) encode(
 		quality = defaultQuality
 	}
 
+	var params vips.ExportParams
+
+	switch format {
+	case FormatJPEG:
+		params = vips.ExportParams{
+			Format:  vips.ImageTypeJPEG,
+			Quality: quality,
+		}
+
+	case FormatPNG:
+		params = vips.ExportParams{
+			Format: vips.ImageTypePNG,
+		}
+
+	case FormatGIF:
+		params = vips.ExportParams{
+			Format: vips.ImageTypeGIF,
+		}
+
+	case FormatWebP:
+		params = vips.ExportParams{
+			Format:  vips.ImageTypeWEBP,
+			Quality: quality,
+		}
+
+	case FormatAVIF:
+		params = vips.ExportParams{
+			Format:  vips.ImageTypeAVIF,
+			Quality: quality,
+		}
+
+	case FormatOriginal:
+		return nil, fmt.Errorf("%w: %s", ErrUnsupportedOutputFormat, format)
+
+	default:
+		return nil, fmt.Errorf("%w: %s", ErrUnsupportedOutputFormat, format)
+	}
+
 	// Stripping drops the ICC profile as well, and clients show an image
 	// with no profile as sRGB, so convert to sRGB first. "srgb" names
 	// libvips' built-in profile; govips' own sRGB path variable is set on
@@ -546,166 +534,11 @@ func (p *ImageProcessor) encode(
 		}
 	}
 
-	switch format {
-	case FormatJPEG:
-		return exportJPEG(img, quality)
+	// Drop EXIF, XMP, IPTC and the ICC profile. govips ignores this for
+	// GIF, which carries none of them.
+	params.StripMetadata = true
 
-	case FormatPNG:
-		return exportPNG(img)
-
-	case FormatGIF:
-		return exportGIF(img)
-
-	case FormatWebP:
-		return exportWebP(img, quality)
-
-	case FormatAVIF:
-		return exportAVIF(img, quality)
-
-	case FormatJXL:
-		return exportJXL(img, quality)
-
-	case FormatOriginal:
-		return nil, fmt.Errorf("%w: %s", ErrUnsupportedOutputFormat, format)
-
-	default:
-		return nil, fmt.Errorf("%w: %s", ErrUnsupportedOutputFormat, format)
-	}
-}
-
-// govips sends libvips Go's zero value for some settings an export leaves
-// out, such as no compression at all for PNG, so each export below sets
-// every setting whose zero value is not what pixa wants. Stripping metadata
-// drops EXIF, XMP, IPTC and the ICC profile.
-
-// exportJPEG encodes img as JPEG at quality, without metadata. The settings
-// it leaves out are at libvips' defaults.
-func exportJPEG(img *vips.ImageRef, quality int) ([]byte, error) {
-	output, _, err := img.ExportJpeg(&vips.JpegExportParams{
-		StripMetadata: true,
-		Quality:       quality,
-	})
-
-	return output, err
-}
-
-// pngCompression is libvips' default PNG compression, from 0 (none) to 9.
-const pngCompression = 6
-
-// exportPNG encodes img as PNG at libvips' default compression and row
-// filter, without metadata.
-func exportPNG(img *vips.ImageRef) ([]byte, error) {
-	output, _, err := img.ExportPng(&vips.PngExportParams{
-		StripMetadata: true,
-		Compression:   pngCompression,
-		Filter:        vips.PngFilterNone,
-	})
-
-	return output, err
-}
-
-// gifEffort is libvips' default GIF effort, from 1 to 10.
-const gifEffort = 7
-
-// exportGIF encodes img as GIF at libvips' default effort. govips cannot
-// have libvips strip metadata from GIF, which carries none.
-func exportGIF(img *vips.ImageRef) ([]byte, error) {
-	output, _, err := img.ExportGIF(&vips.GifExportParams{Effort: gifEffort})
-
-	return output, err
-}
-
-// webpEffort is libvips' default WebP effort, from 0 (fastest) to 6.
-const webpEffort = 4
-
-// exportWebP encodes img as lossy WebP at quality and libvips' default
-// effort, without metadata.
-func exportWebP(img *vips.ImageRef, quality int) ([]byte, error) {
-	output, _, err := img.ExportWebp(&vips.WebpExportParams{
-		StripMetadata:   true,
-		Quality:         quality,
-		ReductionEffort: webpEffort,
-	})
-
-	return output, err
-}
-
-// avifEffort is the AVIF effort, from 0 (fastest) to 9; 1 is the lowest
-// govips can set. With one thread, as pixad runs libvips, 1 takes about 51
-// seconds to save an 8192x8192 image of random pixels, the worst case,
-// against the default downstream_timeout of 60 seconds. On an image of
-// milder noise, which 1 saves in about 12 seconds, 2 takes nearly a minute
-// and libvips' default, 4, takes minutes.
-const avifEffort = 1
-
-// avifBitdepth is the AVIF bit depth, 8 bits per sample for every image.
-// libvips would save a 16-bit image with 12, but at avifEffort that takes
-// about 54 seconds for a 16-bit 8192x8192 image of milder noise, nearly all
-// of the default downstream_timeout, and about 12 seconds with 8.
-const avifBitdepth = 8
-
-// exportAVIF encodes img as lossy AVIF at quality, avifEffort and
-// avifBitdepth, without metadata.
-func exportAVIF(img *vips.ImageRef, quality int) ([]byte, error) {
-	output, _, err := img.ExportAvif(&vips.AvifExportParams{
-		StripMetadata: true,
-		Quality:       quality,
-		Effort:        avifEffort,
-		Bitdepth:      avifBitdepth,
-	})
-
-	return output, err
-}
-
-// jxlResolution is the resolution every JPEG XL image is saved with, in
-// pixels per millimetre as libvips counts it: 72 dpi, what libvips gives a
-// JPEG that names none.
-const jxlResolution = 72 / 25.4
-
-// exportJXL encodes img as JPEG XL at quality, with libvips' default effort
-// and without metadata. govips sends libvips a distance, the JPEG XL
-// encoder's own measure of quality, along with the quality, and libvips then
-// uses the distance alone, so the quality is also given as a distance.
-func exportJXL(img *vips.ImageRef, quality int) ([]byte, error) {
-	// libvips converts a CMYK image to sRGB before it saves WebP, AVIF or
-	// PNG, but cannot save one as JPEG XL. encode has already converted
-	// any image with an ICC profile to sRGB, so this is CMYK with none.
-	if img.Interpretation() == vips.InterpretationCMYK {
-		err := img.ToColorSpace(vips.InterpretationSRGB)
-		if err != nil {
-			return nil, fmt.Errorf("failed to convert CMYK to sRGB: %w", err)
-		}
-	}
-
-	// govips cannot make libvips strip metadata from JPEG XL, so it is
-	// removed from the image itself. RemoveMetadata removes EXIF, XMP and
-	// IPTC but keeps the ICC profile.
-	err := img.RemoveMetadata()
-	if err != nil {
-		return nil, err
-	}
-
-	err = img.RemoveICCProfile()
-	if err != nil {
-		return nil, err
-	}
-
-	// libvips 8.16 and later still write an EXIF block of their own, from
-	// the image's size, orientation and resolution, and fixed values. The
-	// image is upright, so its orientation is 1, but its resolution is still
-	// the source's.
-	toSave, err := img.CopyChangingResolution(jxlResolution, jxlResolution)
-	if err != nil {
-		return nil, err
-	}
-
-	defer toSave.Close()
-
-	params := vips.NewJxlExportParams()
-	params.Quality = quality
-	params.Distance = jxlDistance(quality)
-
-	output, _, err := toSave.ExportJxl(params)
+	output, _, err := img.Export(&params)
 	if err != nil {
 		return nil, err
 	}
@@ -713,39 +546,20 @@ func exportJXL(img *vips.ImageRef, quality int) ([]byte, error) {
 	return output, nil
 }
 
-// jxlDistance turns a quality from 1 to 100 into the JPEG XL encoder's
-// distance, with the formula libvips and libjxl use for their own quality
-// setting, except that 100 stays lossy (distance 0.1) where libjxl makes it
-// lossless.
-//
-//nolint:mnd // the constants of that formula
-func jxlDistance(quality int) float64 {
-	q := float64(quality)
-
-	if quality >= 30 {
-		return 0.1 + (100-q)*0.09
-	}
-
-	return 53.0/3000.0*q*q - 23.0/20.0*q + 25.0
-}
-
-// formatFromString converts a format string from detectFormat to Format. A
-// format detectFormat could not name is ErrUnsupportedInputFormat.
-func (p *ImageProcessor) formatFromString(format string) (Format, error) {
+// formatFromString converts a format string to Format.
+func (p *ImageProcessor) formatFromString(format string) Format {
 	switch format {
 	case "jpeg":
-		return FormatJPEG, nil
+		return FormatJPEG
 	case "png":
-		return FormatPNG, nil
+		return FormatPNG
 	case "gif":
-		return FormatGIF, nil
+		return FormatGIF
 	case "webp":
-		return FormatWebP, nil
+		return FormatWebP
 	case string(FormatAVIF):
-		return FormatAVIF, nil
-	case string(FormatJXL):
-		return FormatJXL, nil
+		return FormatAVIF
 	default:
-		return "", fmt.Errorf("%w: %s", ErrUnsupportedInputFormat, format)
+		return FormatJPEG
 	}
 }

internal/imageprocessor/jpegxl_output_internal_test.go

@@ -1,244 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"io"
-	"math"
-	"os"
-	"testing"
-
-	"github.com/davidbyttow/govips/v2/vips"
-)
-
-// TestImageProcessor_EncodeJPEGXL converts a JPEG to a smaller JPEG XL and
-// checks the content type, and the format and size the output loads as.
-func TestImageProcessor_EncodeJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	req := &Request{Size: Size{Width: 100, Height: 75}, Format: FormatJXL}
-
-	result, err := New(Params{}).Process(
-		t.Context(), bytes.NewReader(createTestJPEG(t, 200, 150)), req,
-	)
-	if err != nil {
-		t.Fatalf("Process() error = %v", err)
-	}
-
-	defer func() { _ = result.Content.Close() }()
-
-	if result.ContentType != "image/jxl" {
-		t.Errorf("ContentType = %q, want image/jxl", result.ContentType)
-	}
-
-	data, err := io.ReadAll(result.Content)
-	if err != nil {
-		t.Fatalf("failed to read result: %v", err)
-	}
-
-	output, err := vips.NewImageFromBuffer(data)
-	if err != nil {
-		t.Fatalf("failed to load the output: %v", err)
-	}
-
-	defer output.Close()
-
-	if output.Format() != vips.ImageTypeJXL {
-		t.Errorf("output format = %s, want jxl", vips.ImageTypes[output.Format()])
-	}
-
-	if output.Width() != 100 || output.Height() != 75 {
-		t.Errorf("output size = %dx%d, want 100x75", output.Width(), output.Height())
-	}
-}
-
-// TestImageProcessor_JPEGXLQuality verifies that the quality reaches the JPEG
-// XL encoder: the same image comes out smaller at quality 30 than at 90.
-func TestImageProcessor_JPEGXLQuality(t *testing.T) {
-	t.Parallel()
-
-	input := createTestJPEG(t, 400, 300)
-	outputBytes := make(map[int]int64)
-
-	for _, quality := range []int{30, 90} {
-		result, err := New(Params{}).Process(t.Context(),
-			bytes.NewReader(input), &Request{Format: FormatJXL, Quality: quality})
-		if err != nil {
-			t.Fatalf("Process() at quality %d error = %v", quality, err)
-		}
-
-		_ = result.Content.Close()
-		outputBytes[quality] = result.ContentLength
-	}
-
-	if outputBytes[30] >= outputBytes[90] {
-		t.Errorf("%d bytes at quality 30, %d at 90, want fewer at 30",
-			outputBytes[30], outputBytes[90])
-	}
-}
-
-// TestImageProcessor_JPEGXLDropsSourceEXIF verifies that none of the source's
-// EXIF reaches a JPEG XL output. libvips 8.16 and later write an EXIF block of
-// their own into JPEG XL (orientation, resolution, size, colour space and
-// fixed defaults), and govips cannot ask them to leave it out, so the test
-// looks for the source's fields rather than for no EXIF at all.
-func TestImageProcessor_JPEGXLDropsSourceEXIF(t *testing.T) {
-	t.Parallel()
-
-	input, err := os.ReadFile("testdata/gps-exif.jpg")
-	if err != nil {
-		t.Fatalf("failed to read test JPEG: %v", err)
-	}
-
-	exif := processAndDecode(t, input, &Request{Format: FormatJXL}).GetExif()
-
-	for _, field := range []string{
-		"exif-ifd0-Make", "exif-ifd0-Model", "exif-ifd2-BodySerialNumber",
-		"exif-ifd2-DateTimeOriginal", "exif-ifd3-GPSLatitude",
-		"exif-ifd3-GPSLongitude",
-	} {
-		if value, found := exif[field]; found {
-			t.Errorf("output has %s: %s", field, value)
-		}
-	}
-}
-
-// TestImageProcessor_JPEGXLDropsSourceResolution verifies that the source's
-// resolution does not reach the EXIF block libvips 8.16 and later write into
-// JPEG XL. A JPEG XL image holds its resolution in that block alone, so the
-// resolution the output loads with is the block's.
-func TestImageProcessor_JPEGXLDropsSourceResolution(t *testing.T) {
-	t.Parallel()
-
-	// dpi-300.jpg is a flat 8x8 grey image with a resolution of 300 dpi.
-	input, err := os.ReadFile("testdata/dpi-300.jpg")
-	if err != nil {
-		t.Fatalf("failed to read test JPEG: %v", err)
-	}
-
-	output := processAndDecode(t, input, &Request{Format: FormatJXL})
-
-	// libvips gives the resolution in pixels per millimetre.
-	xDPI := math.Round(output.ResX() * 25.4)
-	yDPI := math.Round(output.ResY() * 25.4)
-
-	if xDPI == 300 || yDPI == 300 {
-		t.Errorf("output resolution = %vx%v dpi, the source's", xDPI, yDPI)
-	}
-}
-
-// TestImageProcessor_JPEGXLAppliesEXIFOrientation verifies that a JPEG XL
-// output is turned upright, as TestImageProcessor_AppliesEXIFOrientation does
-// for PNG.
-func TestImageProcessor_JPEGXLAppliesEXIFOrientation(t *testing.T) {
-	t.Parallel()
-
-	// orientation-6.jpg is stored 16x8, red on the left and blue on the
-	// right, with EXIF orientation 6 (turn 90 degrees clockwise to view).
-	// Upright it is 8x16, red on top and blue below.
-	input, err := os.ReadFile("testdata/orientation-6.jpg")
-	if err != nil {
-		t.Fatalf("failed to read test JPEG: %v", err)
-	}
-
-	output := processAndDecode(t, input, &Request{Format: FormatJXL})
-
-	if output.Width() != 8 || output.Height() != 16 {
-		t.Fatalf("output is %dx%d, want 8x16", output.Width(), output.Height())
-	}
-
-	top, err := output.GetPoint(4, 0)
-	if err != nil {
-		t.Fatalf("GetPoint() error = %v", err)
-	}
-
-	bottom, err := output.GetPoint(4, 15)
-	if err != nil {
-		t.Fatalf("GetPoint() error = %v", err)
-	}
-
-	if top[0] <= top[2] || bottom[2] <= bottom[0] {
-		t.Errorf("top pixel = %v, bottom pixel = %v, want red above blue",
-			top, bottom)
-	}
-}
-
-// TestImageProcessor_JPEGXLConvertsWideGamutToSRGB verifies that a JPEG XL
-// output is converted to sRGB, as TestImageProcessor_ConvertsWideGamutToSRGB
-// does for PNG. It does not check for an ICC profile, as libvips reports one
-// for every JPEG XL image it loads.
-func TestImageProcessor_JPEGXLConvertsWideGamutToSRGB(t *testing.T) {
-	t.Parallel()
-
-	// display-p3.jpg is a flat 8x8 image with the Display P3 profile
-	// embedded, filled with Display P3 (234, 51, 35), which is sRGB red.
-	input, err := os.ReadFile("testdata/display-p3.jpg")
-	if err != nil {
-		t.Fatalf("failed to read test JPEG: %v", err)
-	}
-
-	output := processAndDecode(t, input, &Request{Format: FormatJXL})
-
-	pixel, err := output.GetPoint(4, 4)
-	if err != nil {
-		t.Fatalf("GetPoint() error = %v", err)
-	}
-
-	want := []float64{255, 0, 0}
-	for i := range want {
-		if math.Abs(pixel[i]-want[i]) > 5 {
-			t.Fatalf("pixel = %v, want within 5 of %v", pixel, want)
-		}
-	}
-}
-
-// TestImageProcessor_JPEGXLFromCMYK verifies that a CMYK JPEG with no ICC
-// profile can be served as JPEG XL, in sRGB.
-func TestImageProcessor_JPEGXLFromCMYK(t *testing.T) {
-	t.Parallel()
-
-	// cmyk.jpg is a flat 8x8 CMYK image with no ICC profile, filled with
-	// full cyan and no magenta, yellow or black.
-	input, err := os.ReadFile("testdata/cmyk.jpg")
-	if err != nil {
-		t.Fatalf("failed to read test JPEG: %v", err)
-	}
-
-	output := processAndDecode(t, input, &Request{Format: FormatJXL})
-
-	if output.Bands() != 3 {
-		t.Fatalf("output has %d bands, want 3", output.Bands())
-	}
-
-	pixel, err := output.GetPoint(4, 4)
-	if err != nil {
-		t.Fatalf("GetPoint() error = %v", err)
-	}
-
-	// Cyan in sRGB: little red, much green and blue.
-	if pixel[0] > 50 || pixel[1] < 100 || pixel[2] < 200 {
-		t.Errorf("pixel = %v, want cyan", pixel)
-	}
-}
-
-// TestJXLDistance verifies the JPEG XL distance for a few qualities: 90 is
-// distance 1, the encoder's own default, and 100 stays lossy.
-func TestJXLDistance(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		quality int
-		want    float64
-	}{
-		{quality: 100, want: 0.1},
-		{quality: 90, want: 1},
-		{quality: 30, want: 6.4},
-		{quality: 20, want: 9.0667},
-	}
-
-	for _, tt := range tests {
-		got := jxlDistance(tt.quality)
-		if math.Abs(got-tt.want) > 0.0001 {
-			t.Errorf("jxlDistance(%d) = %v, want %v", tt.quality, got, tt.want)
-		}
-	}
-}

internal/imageprocessor/orig_format_internal_test.go

@@ -1,39 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"errors"
-	"testing"
-
-	"github.com/davidbyttow/govips/v2/vips"
-)
-
-// TestImageProcessor_OrigOfUnnamedFormatRefused verifies that orig of a TIFF
-// input, which is not a source format, is refused with
-// ErrUnsupportedInputFormat before it is decoded, and not saved as JPEG.
-func TestImageProcessor_OrigOfUnnamedFormatRefused(t *testing.T) {
-	t.Parallel()
-
-	img, err := vips.NewImageFromBuffer(createTestPNG(t, 20, 20))
-	if err != nil {
-		t.Fatalf("failed to decode test PNG: %v", err)
-	}
-
-	t.Cleanup(img.Close)
-
-	tiff, _, err := img.ExportTiff(vips.NewTiffExportParams())
-	if err != nil {
-		t.Fatalf("failed to save test TIFF: %v", err)
-	}
-
-	result, err := New(Params{}).Process(
-		t.Context(), bytes.NewReader(tiff), &Request{Format: FormatOriginal},
-	)
-	if result != nil {
-		t.Logf("Process() returned %s", result.ContentType)
-	}
-
-	if !errors.Is(err, ErrUnsupportedInputFormat) {
-		t.Errorf("Process() error = %v, want %v", err, ErrUnsupportedInputFormat)
-	}
-}

internal/imageprocessor/source_formats_internal_test.go

@@ -1,46 +0,0 @@
-package imageprocessor
-
-import (
-	"bytes"
-	"io"
-	"testing"
-)
-
-// TestImageProcessor_LoadsEachSourceFormat verifies that an image in each of
-// the six source formats, saved by the processor itself, is loaded and saved
-// again in its own format (orig).
-func TestImageProcessor_LoadsEachSourceFormat(t *testing.T) {
-	t.Parallel()
-
-	proc := New(Params{})
-
-	for _, format := range []Format{
-		FormatJPEG, FormatPNG, FormatGIF, FormatWebP, FormatAVIF, FormatJXL,
-	} {
-		saved, err := proc.Process(t.Context(),
-			bytes.NewReader(createTestPNG(t, 20, 20)), &Request{Format: format})
-		if err != nil {
-			t.Fatalf("saving the test image as %s: %v", format, err)
-		}
-
-		source, err := io.ReadAll(saved.Content)
-		if err != nil {
-			t.Fatalf("reading the %s image: %v", format, err)
-		}
-
-		result, err := proc.Process(t.Context(), bytes.NewReader(source),
-			&Request{Format: FormatOriginal})
-		if err != nil {
-			t.Errorf("orig of the %s image: %v", format, err)
-
-			continue
-		}
-
-		t.Logf("orig of the %s image: %s", format, result.ContentType)
-
-		if result.ContentType != FormatToMIME(format) {
-			t.Errorf("orig of the %s image is %s, want %s",
-				format, result.ContentType, FormatToMIME(format))
-		}
-	}
-}

internal/imgcache/cache.go

@@ -11,8 +11,6 @@ import (
 	"io"
 	"log/slog"
 	"path/filepath"
-	"sync"
-	"sync/atomic"
 	"time"
 
 	lru "github.com/hashicorp/golang-lru/v2"
@@ -35,6 +33,7 @@ const metaCacheSize = 10000
 // CacheConfig holds cache configuration.
 type CacheConfig struct {
 	StateDir    string
+	CacheTTL    time.Duration
 	NegativeTTL time.Duration
 
 	// MaxBytes is the disk cache size limit in bytes that eviction
@@ -80,27 +79,6 @@ type Cache struct {
 	evictionDone     chan struct{}
 	evictionCancel   context.CancelFunc
 
-	// The pending counts: hits, misses, upstream fetches and transforms
-	// whose write to the database missed its request's deadline, kept
-	// here until they are written by the goroutine that
-	// StartPendingCountWrites starts. As for eviction, the channels are
-	// created in NewCache: pendingCountsAdded wakes that goroutine, and
-	// pendingCountsDone is closed when it returns. pendingCountsCancel,
-	// set by StartPendingCountWrites, cancels its context, which tells it
-	// to finish.
-	pendingHits               atomic.Int64
-	pendingMisses             atomic.Int64
-	pendingUpstreamFetches    atomic.Int64
-	pendingUpstreamFetchBytes atomic.Int64
-	pendingTransforms         atomic.Int64
-	pendingCountsAdded        chan struct{}
-	pendingCountsDone         chan struct{}
-	pendingCountsCancel       context.CancelFunc
-
-	// Held through each write of the pending counts, and by
-	// readHitAndMissCounts to read them
-	pendingCountsWriteMutex sync.Mutex
-
 	// metaCache holds the content types of the variants most recently
 	// stored or served, so a hit does not read the variant's .meta file.
 	// It never stands in for the variant file, which is always opened.
@@ -161,9 +139,6 @@ func newCache(
 		metaCache:        metaCache,
 		contentLocks:     newContentLock(),
 
-		pendingCountsAdded: make(chan struct{}, 1),
-		pendingCountsDone:  make(chan struct{}),
-
 		reconciliationPageSize: defaultReconciliationPageSize,
 	}
 
@@ -499,7 +474,12 @@ func (c *Cache) CleanExpired(ctx context.Context) error {
 func (c *Cache) Stats(ctx context.Context) (*CacheStats, error) {
 	var stats CacheStats
 
-	err := c.readHitAndMissCounts(ctx, &stats)
+	// Fetch hit/miss counts from the stats table
+	err := c.db.QueryRowContext(ctx, `
+		SELECT hit_count, miss_count
+		FROM cache_stats WHERE id = 1
+	`).Scan(&stats.HitCount, &stats.MissCount)
+
 	if err != nil && !errors.Is(err, sql.ErrNoRows) {
 		return nil, fmt.Errorf("failed to get cache stats: %w", err)
 	}
@@ -531,30 +511,19 @@ func (c *Cache) Stats(ctx context.Context) (*CacheStats, error) {
 }
 
 // IncrementStats counts a cache hit or miss, and an upstream fetch that read
-// fetchBytes bytes, as IncrementUpstreamFetch does. Like the other Increment
-// methods, it writes to the database with ctx's deadline but not its
-// cancellation, so an ended request is still counted but does not wait for
-// the database past its deadline; a count not written by then becomes a
-// pending count (see StartPendingCountWrites).
+// fetchBytes bytes, as IncrementUpstreamFetch does.
 func (c *Cache) IncrementStats(ctx context.Context, hit bool, fetchBytes int64) {
-	countCtx, cancel := withoutCancelKeepingDeadline(ctx)
-	defer cancel()
-
 	var err error
 
-	pendingCount := &c.pendingMisses
-
 	if hit {
-		pendingCount = &c.pendingHits
-
-		_, err = c.db.ExecContext(countCtx, `
+		_, err = c.db.ExecContext(ctx, `
 			UPDATE cache_stats
 			SET hit_count = hit_count + 1,
 			    last_updated_at = CURRENT_TIMESTAMP
 			WHERE id = 1
 		`)
 	} else {
-		_, err = c.db.ExecContext(countCtx, `
+		_, err = c.db.ExecContext(ctx, `
 			UPDATE cache_stats
 			SET miss_count = miss_count + 1,
 			    last_updated_at = CURRENT_TIMESTAMP
@@ -562,10 +531,7 @@ func (c *Cache) IncrementStats(ctx context.Context, hit bool, fetchBytes int64)
 		`)
 	}
 
-	switch {
-	case errors.Is(err, context.DeadlineExceeded):
-		c.addPendingCount(pendingCount, 1)
-	case err != nil:
+	if err != nil {
 		c.log.Warn("failed to count cache hit or miss", "hit", hit, "error", err)
 	}
 
@@ -579,22 +545,14 @@ func (c *Cache) IncrementUpstreamFetch(ctx context.Context, fetchBytes int64) {
 		return
 	}
 
-	countCtx, cancel := withoutCancelKeepingDeadline(ctx)
-	defer cancel()
-
-	_, err := c.db.ExecContext(countCtx, `
+	_, err := c.db.ExecContext(ctx, `
 		UPDATE cache_stats
 		SET upstream_fetch_count = upstream_fetch_count + 1,
 		    upstream_fetch_bytes = upstream_fetch_bytes + ?,
 		    last_updated_at = CURRENT_TIMESTAMP
 		WHERE id = 1
 	`, fetchBytes)
-
-	switch {
-	case errors.Is(err, context.DeadlineExceeded):
-		c.addPendingCount(&c.pendingUpstreamFetches, 1)
-		c.addPendingCount(&c.pendingUpstreamFetchBytes, fetchBytes)
-	case err != nil:
+	if err != nil {
 		c.log.Warn("failed to count upstream fetch",
 			"fetch_bytes", fetchBytes, "error", err)
 	}
@@ -602,43 +560,17 @@ func (c *Cache) IncrementUpstreamFetch(ctx context.Context, fetchBytes int64) {
 
 // IncrementTransformCount counts one image transcoded by the image processor.
 func (c *Cache) IncrementTransformCount(ctx context.Context) {
-	countCtx, cancel := withoutCancelKeepingDeadline(ctx)
-	defer cancel()
-
-	_, err := c.db.ExecContext(countCtx, `
+	_, err := c.db.ExecContext(ctx, `
 		UPDATE cache_stats
 		SET transform_count = transform_count + 1,
 		    last_updated_at = CURRENT_TIMESTAMP
 		WHERE id = 1
 	`)
-
-	switch {
-	case errors.Is(err, context.DeadlineExceeded):
-		c.addPendingCount(&c.pendingTransforms, 1)
-	case err != nil:
+	if err != nil {
 		c.log.Warn("failed to count transform", "error", err)
 	}
 }
 
-// readHitAndMissCounts sets the hit and miss counts of stats to those of the
-// cache_stats row plus the pending hits and misses (see
-// StartPendingCountWrites). It holds pendingCountsWriteMutex, so that no
-// write of the pending counts falls between the two reads.
-func (c *Cache) readHitAndMissCounts(ctx context.Context, stats *CacheStats) error {
-	c.pendingCountsWriteMutex.Lock()
-	defer c.pendingCountsWriteMutex.Unlock()
-
-	err := c.db.QueryRowContext(ctx, `
-		SELECT hit_count, miss_count
-		FROM cache_stats WHERE id = 1
-	`).Scan(&stats.HitCount, &stats.MissCount)
-
-	stats.HitCount += c.pendingHits.Load()
-	stats.MissCount += c.pendingMisses.Load()
-
-	return err
-}
-
 // loadVariantWithMeta is GetVariant for a variant metaCache does not
 // hold: it reads the content type from the variant's .meta file and
 // keeps it in metaCache, unless a StoreVariant has put one there

internal/imgcache/cache_internal_test.go

@@ -102,6 +102,7 @@ func setupTestCache(t *testing.T) *Cache {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    tmpDir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {
@@ -240,6 +241,7 @@ func TestCache_NegativeCacheExpiry(t *testing.T) {
 	// Very short negative TTL for testing
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    tmpDir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 1 * time.Millisecond,
 	})
 	if err != nil {

internal/imgcache/eviction_internal_test.go

@@ -70,6 +70,7 @@ func newEvictionTestCache(t *testing.T, maxBytes int64) (*Cache, string) {
 	// backwards compatibility with existing fixtures.
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:         tmpDir,
+		CacheTTL:         time.Hour,
 		NegativeTTL:      5 * time.Minute,
 		MaxBytes:         maxBytes,
 		DisableDiskCache: maxBytes == 0,

internal/imgcache/imgcache.go

@@ -21,12 +21,11 @@ const (
 	FormatPNG      ImageFormat = "png"
 	FormatWebP     ImageFormat = "webp"
 	FormatAVIF     ImageFormat = "avif"
-	FormatJXL      ImageFormat = "jxl"
 	FormatGIF      ImageFormat = "gif"
 
-	// FormatAuto stands for JPEG XL, AVIF, WebP or JPEG, chosen for each
-	// request from its Accept header once the URL's signature or token has
-	// been checked; it is never processed or cached as itself.
+	// FormatAuto stands for AVIF, WebP or JPEG, chosen for each request
+	// from its Accept header once the URL's signature or token has been
+	// checked; it is never processed or cached as itself.
 	FormatAuto ImageFormat = "auto"
 )
 

internal/imgcache/module.go

@@ -4,5 +4,6 @@ import "time"
 
 // CacheConfig defaults.
 const (
+	DefaultCacheTTL    = 24 * time.Hour
 	DefaultNegativeTTL = 5 * time.Minute
 )

internal/imgcache/negative_cache_internal_test.go

@@ -15,6 +15,7 @@ func TestNegativeCache_StoreAndCheck(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    dir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {
@@ -62,6 +63,7 @@ func TestNegativeCache_Expired(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    dir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 1 * time.Millisecond, // very short TTL
 	})
 	if err != nil {

internal/imgcache/pendingcounts.go

@@ -1,149 +0,0 @@
-package imgcache
-
-import (
-	"context"
-	"fmt"
-	"sync/atomic"
-)
-
-// StartPendingCountWrites starts the goroutine that writes the pending
-// counts to the database whenever there are some, one UPDATE at a time:
-// however many requests pass their deadline before their counts are
-// written, at most this one write waits for the database. It is a no-op
-// when already started. The goroutine outlives the caller, so it runs with
-// its own context, which StopPendingCountWrites cancels to tell it to
-// finish.
-func (c *Cache) StartPendingCountWrites() {
-	if c.pendingCountsCancel != nil {
-		return
-	}
-
-	ctx, cancel := context.WithCancel(context.Background())
-	c.pendingCountsCancel = cancel
-
-	go func() {
-		c.pendingCountWriteLoop(ctx)
-	}()
-}
-
-// StopPendingCountWrites tells the goroutine StartPendingCountWrites
-// started, if it did, to finish, and waits for its write under way to end
-// and for it to return. It then writes the pending counts left, so that
-// they are written before the database closes. It waits for all of this at
-// most until ctx ends, then logs the counts not written and returns an
-// error.
-func (c *Cache) StopPendingCountWrites(ctx context.Context) error {
-	var err error
-
-	if c.pendingCountsCancel != nil {
-		c.pendingCountsCancel()
-
-		select {
-		case <-c.pendingCountsDone:
-		case <-ctx.Done():
-			// The write given up on here may not reach the database:
-			// database/sql closes without waiting for a query, and a
-			// write still waiting for the connection fails when the
-			// database closes.
-			err = fmt.Errorf("pending counts still being written: %w", ctx.Err())
-		}
-	}
-
-	if err == nil {
-		err = c.writePendingCounts(ctx)
-	}
-
-	if err != nil {
-		c.log.Error("counts not written at shutdown",
-			"hits", c.pendingHits.Load(),
-			"misses", c.pendingMisses.Load(),
-			"upstream_fetches", c.pendingUpstreamFetches.Load(),
-			"upstream_fetch_bytes", c.pendingUpstreamFetchBytes.Load(),
-			"transforms", c.pendingTransforms.Load(),
-			"error", err,
-		)
-
-		return err
-	}
-
-	return nil
-}
-
-// pendingCountWriteLoop is the body of the goroutine
-// StartPendingCountWrites starts. Once ctx is cancelled it starts no write
-// and returns, but does not cut off a write under way then. A write that
-// fails leaves the counts pending, for the next write.
-func (c *Cache) pendingCountWriteLoop(ctx context.Context) {
-	defer close(c.pendingCountsDone)
-
-	for {
-		select {
-		case <-ctx.Done():
-			return
-		case <-c.pendingCountsAdded:
-		}
-
-		// select picks at random when ctx is cancelled and a wakeup
-		// waits too.
-		if ctx.Err() != nil {
-			return
-		}
-
-		err := c.writePendingCounts(context.WithoutCancel(ctx))
-		if err != nil {
-			c.log.Warn("failed to write pending counts", "error", err)
-		}
-	}
-}
-
-// addPendingCount adds n to pendingCount, one of the pending counts, and
-// wakes the goroutine that writes them. pendingCountsAdded has capacity one,
-// so a wakeup already waiting is enough.
-func (c *Cache) addPendingCount(pendingCount *atomic.Int64, n int64) {
-	pendingCount.Add(n)
-
-	select {
-	case c.pendingCountsAdded <- struct{}{}:
-	default:
-	}
-}
-
-// writePendingCounts adds the pending counts to the cache_stats row in one
-// UPDATE, then takes what it wrote out of them, leaving any added
-// meanwhile. When the UPDATE fails, they all stay pending.
-func (c *Cache) writePendingCounts(ctx context.Context) error {
-	c.pendingCountsWriteMutex.Lock()
-	defer c.pendingCountsWriteMutex.Unlock()
-
-	hits := c.pendingHits.Load()
-	misses := c.pendingMisses.Load()
-	upstreamFetches := c.pendingUpstreamFetches.Load()
-	upstreamFetchBytes := c.pendingUpstreamFetchBytes.Load()
-	transforms := c.pendingTransforms.Load()
-
-	if hits+misses+upstreamFetches+upstreamFetchBytes+transforms == 0 {
-		return nil
-	}
-
-	_, err := c.db.ExecContext(ctx, `
-		UPDATE cache_stats
-		SET hit_count = hit_count + ?,
-		    miss_count = miss_count + ?,
-		    upstream_fetch_count = upstream_fetch_count + ?,
-		    upstream_fetch_bytes = upstream_fetch_bytes + ?,
-		    transform_count = transform_count + ?,
-		    last_updated_at = CURRENT_TIMESTAMP
-		WHERE id = 1
-	`, hits, misses, upstreamFetches, upstreamFetchBytes, transforms)
-	if err != nil {
-		return fmt.Errorf("failed to write pending counts: %w", err)
-	}
-
-	c.pendingHits.Add(-hits)
-	c.pendingMisses.Add(-misses)
-	c.pendingUpstreamFetches.Add(-upstreamFetches)
-	c.pendingUpstreamFetchBytes.Add(-upstreamFetchBytes)
-	c.pendingTransforms.Add(-transforms)
-
-	return nil
-}

internal/imgcache/pendingcounts_internal_test.go

@@ -1,327 +0,0 @@
-package imgcache
-
-import (
-	"context"
-	"database/sql"
-	"errors"
-	"testing"
-	"time"
-)
-
-// pendingCountsWait is how long a test waits for the database's connection,
-// for a count to reach the database, for a write to start waiting for the
-// connection, for a request to return past its deadline, or for
-// StopPendingCountWrites to return.
-const pendingCountsWait = 5 * time.Second
-
-// otherWritesWait is how long a test gives other writes, once one write waits
-// for the database's connection, to start waiting for it too.
-const otherWritesWait = 100 * time.Millisecond
-
-// holdDatabase takes the one connection of cache's database, so that every
-// other query waits for it, and returns the func that frees it.
-func holdDatabase(t *testing.T, cache *Cache) func() {
-	t.Helper()
-
-	ctx, cancel := context.WithTimeout(t.Context(), pendingCountsWait)
-	defer cancel()
-
-	conn, err := cache.db.Conn(ctx)
-	if err != nil {
-		t.Fatalf("failed to take the database connection: %v", err)
-	}
-
-	return func() { _ = conn.Close() }
-}
-
-// waitForConnectionWaits waits until db.Stats().WaitCount, the number of
-// times a caller has waited for a connection, reaches waits.
-func waitForConnectionWaits(t *testing.T, db *sql.DB, waits int64) {
-	t.Helper()
-
-	deadline := time.Now().Add(pendingCountsWait)
-
-	for db.Stats().WaitCount < waits {
-		if time.Now().After(deadline) {
-			t.Fatalf("callers waited for the database connection %d times, want %d",
-				db.Stats().WaitCount, waits)
-		}
-
-		time.Sleep(10 * time.Millisecond)
-	}
-}
-
-// waitForCounters waits until the cache_stats row holds want.
-func waitForCounters(t *testing.T, cache *Cache, want cacheStatsCounters) {
-	t.Helper()
-
-	deadline := time.Now().Add(pendingCountsWait)
-
-	for {
-		got := readCacheStatsCounters(t, cache)
-		if got == want {
-			return
-		}
-
-		if time.Now().After(deadline) {
-			t.Fatalf("counters = %+v, want %+v", got, want)
-		}
-
-		time.Sleep(10 * time.Millisecond)
-	}
-}
-
-// TestService_Get_ReturnsByItsDeadlineWhileTheDatabaseIsBusy holds the
-// database's one connection while a request whose fetch is held reaches its
-// deadline. The request must return with the deadline's error while the
-// connection is still held, as it waits for no database write past its
-// deadline, and its miss must reach the database once the connection is free.
-func TestService_Get_ReturnsByItsDeadlineWhileTheDatabaseIsBusy(t *testing.T) {
-	t.Parallel()
-
-	svc, fixtures, fetcher := setupHeldFetchService(t)
-
-	svc.cache.StartPendingCountWrites()
-	defer func() { _ = svc.cache.StopPendingCountWrites(t.Context()) }()
-
-	// Room for the request to reach its fetch on a busy host
-	const timeout = 2 * time.Second
-
-	ctx, cancel := context.WithTimeout(t.Context(), timeout)
-	defer cancel()
-
-	deadline, _ := ctx.Deadline()
-
-	results := startGet(ctx, svc, photoVariant(fixtures, 85, FitCover))
-
-	// The request has made its database reads by the time it fetches.
-	select {
-	case <-fetcher.started:
-	case <-time.After(timeout):
-		t.Fatal("request did not reach its fetch by its deadline")
-	}
-
-	releaseDatabase := holdDatabase(t, svc.cache)
-	defer releaseDatabase()
-
-	select {
-	case got := <-results:
-		t.Logf("Get() returned %v after its deadline, error = %v",
-			time.Since(deadline), got.err)
-
-		if !errors.Is(got.err, context.DeadlineExceeded) {
-			t.Errorf("Get() error = %v, want %v", got.err, context.DeadlineExceeded)
-		}
-	case <-time.After(time.Until(deadline) + pendingCountsWait):
-		t.Fatal("request did not return while the database was busy")
-	}
-
-	releaseDatabase()
-
-	waitForCounters(t, svc.cache, cacheStatsCounters{missCount: 1})
-}
-
-// TestIncrementStats_ManyCountsPastTheirDeadlineLeaveOneWriteWaiting holds the
-// database's one connection while many misses are counted past their
-// deadline. At most one write may then wait for the connection, and every
-// miss must reach the database once it is free.
-func TestIncrementStats_ManyCountsPastTheirDeadlineLeaveOneWriteWaiting(t *testing.T) {
-	t.Parallel()
-
-	cache, _ := newEvictionTestCache(t, 1<<30)
-
-	cache.StartPendingCountWrites()
-	defer func() { _ = cache.StopPendingCountWrites(t.Context()) }()
-
-	releaseDatabase := holdDatabase(t, cache)
-	defer releaseDatabase()
-
-	waitsBefore := cache.db.Stats().WaitCount
-
-	// Writes given a context past its deadline fail at once.
-	ended, cancel := context.WithDeadline(t.Context(), time.Now())
-	defer cancel()
-
-	const misses = 20
-
-	for range misses {
-		cache.IncrementStats(ended, false, 0)
-	}
-
-	// Once one write waits for the connection, any others start waiting too.
-	waitForConnectionWaits(t, cache.db, waitsBefore+1)
-	time.Sleep(otherWritesWait)
-
-	waits := cache.db.Stats().WaitCount - waitsBefore
-	t.Logf("%d writes waited for the database", waits)
-
-	if waits > 1 {
-		t.Errorf("%d writes waited for the database, want at most 1", waits)
-	}
-
-	releaseDatabase()
-
-	waitForCounters(t, cache, cacheStatsCounters{missCount: misses})
-}
-
-// TestStats_IncludesPendingCounts counts hits and misses whose writes miss
-// their deadline, and checks that Stats adds them to the database's counts
-// before they are written.
-func TestStats_IncludesPendingCounts(t *testing.T) {
-	t.Parallel()
-
-	cache, _ := newEvictionTestCache(t, 1<<30)
-
-	_, err := cache.db.ExecContext(t.Context(),
-		`UPDATE cache_stats SET hit_count = 75, miss_count = 25 WHERE id = 1`)
-	if err != nil {
-		t.Fatal(err)
-	}
-
-	// Writes given a context past its deadline fail at once.
-	ended, cancel := context.WithDeadline(t.Context(), time.Now())
-	defer cancel()
-
-	cache.IncrementStats(ended, true, 0)
-	cache.IncrementStats(ended, true, 0)
-	cache.IncrementStats(ended, false, 0)
-
-	stats, err := cache.Stats(t.Context())
-	if err != nil {
-		t.Fatalf("Stats() error = %v", err)
-	}
-
-	if stats.HitCount != 77 || stats.MissCount != 26 {
-		t.Errorf("HitCount = %d, MissCount = %d, want 77 and 26",
-			stats.HitCount, stats.MissCount)
-	}
-
-	want := cacheStatsCounters{hitCount: 75, missCount: 25}
-	if got := readCacheStatsCounters(t, cache); got != want {
-		t.Errorf("counters in the database = %+v, want %+v", got, want)
-	}
-}
-
-// TestStopPendingCountWrites_WritesPendingCounts holds the database's one
-// connection while the goroutine that writes the pending counts waits for it,
-// counts more, then stops that goroutine. The stop must leave the write under
-// way to finish rather than cut it off, and once the connection is free it
-// must write the counts that write left.
-func TestStopPendingCountWrites_WritesPendingCounts(t *testing.T) {
-	t.Parallel()
-
-	cache, _ := newEvictionTestCache(t, 1<<30)
-
-	cache.StartPendingCountWrites()
-	defer func() { _ = cache.StopPendingCountWrites(t.Context()) }()
-
-	releaseDatabase := holdDatabase(t, cache)
-	defer releaseDatabase()
-
-	waitsBefore := cache.db.Stats().WaitCount
-
-	// Writes given a context past its deadline fail at once.
-	ended, cancel := context.WithDeadline(t.Context(), time.Now())
-	defer cancel()
-
-	cache.IncrementStats(ended, true, 0)
-
-	// The goroutine's write waits for the connection.
-	waitForConnectionWaits(t, cache.db, waitsBefore+1)
-
-	// Counted after that write read the pending counts
-	cache.IncrementStats(ended, false, 0)
-	cache.IncrementUpstreamFetch(ended, 1024)
-	cache.IncrementTransformCount(ended)
-
-	// The goroutine is told to finish here as well as by the stop, so that it
-	// is told before its write under way ends, however late the stop runs.
-	// The counts above then reach the database only through the stop's own
-	// write.
-	cache.pendingCountsCancel()
-
-	stopped := make(chan error, 1)
-
-	go func() {
-		stopped <- cache.StopPendingCountWrites(t.Context())
-	}()
-
-	// Had the stop cut off the write under way, its own write would wait for
-	// the connection too.
-	time.Sleep(otherWritesWait)
-
-	waits := cache.db.Stats().WaitCount - waitsBefore
-	t.Logf("%d writes waited for the database", waits)
-
-	if waits > 1 {
-		t.Errorf("%d writes waited for the database, want 1: "+
-			"the stop cut off the write under way", waits)
-	}
-
-	releaseDatabase()
-
-	select {
-	case err := <-stopped:
-		if err != nil {
-			t.Fatalf("StopPendingCountWrites() error = %v", err)
-		}
-	case <-time.After(pendingCountsWait):
-		t.Fatal("StopPendingCountWrites() did not return once the database was free")
-	}
-
-	want := cacheStatsCounters{1, 1, 1, 1024, 1}
-	if got := readCacheStatsCounters(t, cache); got != want {
-		t.Errorf("counters = %+v, want %+v", got, want)
-	}
-}
-
-// TestStopPendingCountWrites_ReturnsWhenItsContextEnds holds the database's
-// one connection while the goroutine that writes the pending counts waits for
-// it, then stops that goroutine with a context that ends first. The stop must
-// return the context's error, and the write under way must still reach the
-// database once the connection is free.
-func TestStopPendingCountWrites_ReturnsWhenItsContextEnds(t *testing.T) {
-	t.Parallel()
-
-	cache, _ := newEvictionTestCache(t, 1<<30)
-
-	cache.StartPendingCountWrites()
-	defer func() { _ = cache.StopPendingCountWrites(t.Context()) }()
-
-	releaseDatabase := holdDatabase(t, cache)
-	defer releaseDatabase()
-
-	waitsBefore := cache.db.Stats().WaitCount
-
-	// Writes given a context past its deadline fail at once.
-	ended, cancel := context.WithDeadline(t.Context(), time.Now())
-	defer cancel()
-
-	cache.IncrementStats(ended, true, 0)
-
-	// The goroutine's write waits for the connection.
-	waitForConnectionWaits(t, cache.db, waitsBefore+1)
-
-	stopCtx, cancelStop := context.WithCancel(t.Context())
-	cancelStop()
-
-	stopped := make(chan error, 1)
-
-	go func() {
-		stopped <- cache.StopPendingCountWrites(stopCtx)
-	}()
-
-	select {
-	case err := <-stopped:
-		if !errors.Is(err, context.Canceled) {
-			t.Errorf("StopPendingCountWrites() error = %v, want %v",
-				err, context.Canceled)
-		}
-	case <-time.After(pendingCountsWait):
-		t.Fatal("StopPendingCountWrites() did not return once its context ended")
-	}
-
-	releaseDatabase()
-
-	waitForCounters(t, cache, cacheStatsCounters{hitCount: 1})
-}

internal/imgcache/service.go

@@ -100,8 +100,8 @@ func NewService(cfg *ServiceConfig) (*Service, error) {
 		allowHTTP = cfg.FetcherConfig.AllowHTTP
 	}
 
-	// JPEG XL is the default output format, so pixad does not start
-	// without it.
+	// JPEG XL is to become the default output format, so pixad does not
+	// start without it.
 	err := imageprocessor.CheckJPEGXLSupport()
 	if err != nil {
 		return nil, err
@@ -162,7 +162,7 @@ func (s *Service) Get(ctx context.Context, req *ImageRequest) (*ImageResponse, e
 			// Fall through to re-process
 		} else {
 			// Counted also when the request context has ended meanwhile
-			s.cache.IncrementStats(ctx, true, 0)
+			s.cache.IncrementStats(context.WithoutCancel(ctx), true, 0)
 
 			return &ImageResponse{
 				Content:       reader,
@@ -179,7 +179,7 @@ func (s *Service) Get(ctx context.Context, req *ImageRequest) (*ImageResponse, e
 	// failed or the request context has ended meanwhile
 	response, err := s.processOrWait(ctx, req)
 
-	s.cache.IncrementStats(ctx, false, 0)
+	s.cache.IncrementStats(context.WithoutCancel(ctx), false, 0)
 
 	if err != nil {
 		return nil, err
@@ -300,8 +300,14 @@ func (s *Service) processOrWait(
 				}
 			}()
 
-			processingCtx, cancel := withoutCancelKeepingDeadline(ctx)
+			processingCtx := context.WithoutCancel(ctx)
+
+			if deadline, ok := ctx.Deadline(); ok {
+				var cancel context.CancelFunc
+
+				processingCtx, cancel = context.WithDeadline(processingCtx, deadline)
 				defer cancel()
+			}
 
 			return s.processFromSourceOrFetch(processingCtx, req, cacheKey)
 		})
@@ -338,20 +344,6 @@ func (s *Service) processOrWait(
 	}, nil
 }
 
-// withoutCancelKeepingDeadline returns ctx without its cancellation but with
-// its deadline, if it has one, and the func that releases the returned
-// context.
-func withoutCancelKeepingDeadline(
-	ctx context.Context,
-) (context.Context, context.CancelFunc) {
-	deadline, hasDeadline := ctx.Deadline()
-	if !hasDeadline {
-		return context.WithoutCancel(ctx), func() {}
-	}
-
-	return context.WithDeadline(context.WithoutCancel(ctx), deadline)
-}
-
 // loadCachedSource opens source content from cache, without reading it, and
 // returns it with its size; nil if the cached data is unavailable, empty or
 // exceeds maxResponseSize.
@@ -461,7 +453,7 @@ func (s *Service) fetchAndProcess(
 	fetchBytes := int64(len(sourceData))
 
 	// Counted also when the request context has ended meanwhile
-	s.cache.IncrementUpstreamFetch(ctx, fetchBytes)
+	s.cache.IncrementUpstreamFetch(context.WithoutCancel(ctx), fetchBytes)
 
 	if err != nil {
 		return nil, fmt.Errorf("failed to read upstream response: %w", err)
@@ -543,7 +535,7 @@ func (s *Service) processAndStore(
 	processDuration := time.Since(processStart)
 
 	// Counted also when the request context has ended meanwhile
-	s.cache.IncrementTransformCount(ctx)
+	s.cache.IncrementTransformCount(context.WithoutCancel(ctx))
 
 	// Read processed content
 	processedData, err := io.ReadAll(processResult.Content)

internal/imgcache/service_internal_test.go

@@ -2,9 +2,7 @@ package imgcache
 
 import (
 	"context"
-	"encoding/json"
 	"io"
-	"os"
 	"testing"
 	"time"
 
@@ -432,172 +430,6 @@ func TestService_Get_Caching(t *testing.T) {
 	}
 }
 
-// TestService_Get_ServesSourceAndVariantCachedTwoDaysAgo caches a source and
-// a variant of it and sets back two days every time pixa stored for them.
-// For the source: fetched_at in source_metadata, fetched_at and
-// last_accessed_at in source_content, the fetched_at in its metadata file,
-// and the access and modification times of its file and of its metadata
-// file. For the variant: created_at and last_accessed_at in variant_content,
-// the created_at in its .meta file, and the access and modification times of
-// its file and of its .meta file. It then checks that the variant is still
-// served from the cache and that a new variant is made from the cached source
-// without fetching it again.
-//
-// Left at the present: the files' status change and birth times, which a
-// program cannot set, and the times of the directories holding the files,
-// which other entries share. The source's stored response headers are empty,
-// as the mock fetcher sends none. expires_at, etag and last_modified in
-// source_metadata and in the metadata file are never written, nor are the
-// request_cache and output_content tables.
-func TestService_Get_ServesSourceAndVariantCachedTwoDaysAgo(t *testing.T) {
-	t.Parallel()
-
-	svc, fixtures := SetupTestService(t)
-	variant := photoVariant(fixtures, 85, FitCover)
-
-	resp, err := svc.Get(t.Context(), variant)
-	if err != nil {
-		t.Fatalf("Get() first request error = %v", err)
-	}
-
-	_ = resp.Content.Close()
-
-	twoDaysAgo := time.Now().AddDate(0, 0, -2)
-	backdateSource(t, svc.cache, variant, twoDaysAgo)
-	backdateVariant(t, svc.cache, variant, twoDaysAgo)
-
-	resp, err = svc.Get(t.Context(), variant)
-	if err != nil {
-		t.Fatalf("Get() of the cached variant error = %v", err)
-	}
-
-	_ = resp.Content.Close()
-
-	if resp.CacheStatus != CacheHit {
-		t.Errorf("cached variant CacheStatus = %q, want %q",
-			resp.CacheStatus, CacheHit)
-	}
-
-	// Another quality is a new variant, made from the cached source
-	resp, err = svc.Get(t.Context(), photoVariant(fixtures, 40, FitCover))
-	if err != nil {
-		t.Fatalf("Get() of a new variant error = %v", err)
-	}
-
-	_ = resp.Content.Close()
-
-	fetches := readCacheStatsCounters(t, svc.cache).upstreamFetchCount
-	if fetches != 1 {
-		t.Errorf("upstream fetches = %d, want 1", fetches)
-	}
-}
-
-// backdateSource sets every time pixa stored for req's cached source to when,
-// as listed on TestService_Get_ServesSourceAndVariantCachedTwoDaysAgo.
-func backdateSource(
-	t *testing.T, cache *Cache, req *ImageRequest, when time.Time,
-) {
-	t.Helper()
-
-	pathHash := HashPath(req.SourcePath + "?" + req.SourceQuery)
-
-	meta, err := cache.srcMetadata.Load(req.SourceHost, pathHash)
-	if err != nil {
-		t.Fatalf("reading the source's metadata file: %v", err)
-	}
-
-	meta.FetchedAt = when.Unix()
-
-	err = cache.srcMetadata.Store(req.SourceHost, pathHash, meta)
-	if err != nil {
-		t.Fatalf("writing the source's metadata file: %v", err)
-	}
-
-	dbTime := when.UTC().Format(sqliteTimestampFormat)
-
-	updateOneRow(t, cache, `
-		UPDATE source_metadata SET fetched_at = ?
-		WHERE source_host = ? AND source_path = ? AND source_query = ?
-	`, dbTime, req.SourceHost, req.SourcePath, req.SourceQuery)
-	updateOneRow(t, cache,
-		`UPDATE source_content SET fetched_at = ? WHERE content_hash = ?`,
-		dbTime, meta.ContentHash)
-	setSourceLastAccessed(t, cache, ContentHash(meta.ContentHash), when)
-
-	for _, path := range []string{
-		cache.srcContent.hashToPath(ContentHash(meta.ContentHash)),
-		cache.srcMetadata.metaPath(req.SourceHost, pathHash),
-	} {
-		err = os.Chtimes(path, when, when)
-		if err != nil {
-			t.Fatalf("setting back the times of %s: %v", path, err)
-		}
-	}
-}
-
-// backdateVariant sets every time pixa stored for the cached variant req asks
-// for to when, as listed on
-// TestService_Get_ServesSourceAndVariantCachedTwoDaysAgo.
-func backdateVariant(
-	t *testing.T, cache *Cache, req *ImageRequest, when time.Time,
-) {
-	t.Helper()
-
-	key := CacheKey(req)
-
-	content, size, contentType, err := cache.variants.LoadWithMeta(key)
-	if err != nil || contentType == "" {
-		t.Fatalf("reading the variant's .meta file: content type %q, error %v",
-			contentType, err)
-	}
-
-	_ = content.Close()
-
-	meta, err := json.Marshal(VariantMeta{
-		ContentType: contentType,
-		Size:        size,
-		CreatedAt:   when.Unix(),
-	})
-	if err != nil {
-		t.Fatalf("encoding the variant's .meta file: %v", err)
-	}
-
-	path := cache.variants.keyToPath(key)
-
-	err = os.WriteFile(path+variantMetaSuffix, meta, StorageFilePerm)
-	if err != nil {
-		t.Fatalf("writing the variant's .meta file: %v", err)
-	}
-
-	updateOneRow(t, cache,
-		`UPDATE variant_content SET created_at = ? WHERE cache_key = ?`,
-		when.UTC().Format(sqliteTimestampFormat), string(key))
-	setVariantLastAccessed(t, cache, key, when)
-
-	for _, file := range []string{path, path + variantMetaSuffix} {
-		err = os.Chtimes(file, when, when)
-		if err != nil {
-			t.Fatalf("setting back the times of %s: %v", file, err)
-		}
-	}
-}
-
-// updateOneRow runs the UPDATE statement query and fails the test unless it
-// changed exactly one row.
-func updateOneRow(t *testing.T, cache *Cache, query string, args ...any) {
-	t.Helper()
-
-	result, err := cache.db.ExecContext(t.Context(), query, args...)
-	if err != nil {
-		t.Fatalf("%s: %v", query, err)
-	}
-
-	rows, err := result.RowsAffected()
-	if err != nil || rows != 1 {
-		t.Fatalf("%s: rows = %d, error = %v, want 1 row", query, rows, err)
-	}
-}
-
 func TestService_Get_DifferentSizes(t *testing.T) {
 	t.Parallel()
 

internal/imgcache/stats_internal_test.go

@@ -43,6 +43,7 @@ func TestStats_HitRateIsRatio(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    dir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {
@@ -90,6 +91,7 @@ func TestStats_ZeroCounts(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    dir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {
@@ -118,6 +120,7 @@ func TestStats_LogsFailedCountQueries(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    t.TempDir(),
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 		Logger:      slog.New(slog.NewJSONHandler(&logBuf, nil)),
 	})
@@ -159,6 +162,7 @@ func TestIncrementStats_LogsFailedUpdates(t *testing.T) {
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    t.TempDir(),
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 		Logger:      slog.New(slog.NewJSONHandler(&logBuf, nil)),
 	})
@@ -228,6 +232,7 @@ func TestStats_DisabledCacheReportsNoItems(t *testing.T) {
 
 	disabled, err := NewCache(enabled.db, CacheConfig{
 		StateDir:         t.TempDir(),
+		CacheTTL:         time.Hour,
 		NegativeTTL:      5 * time.Minute,
 		DisableDiskCache: true,
 	})

internal/imgcache/testutil_internal_test.go

@@ -185,6 +185,7 @@ func SetupTestService(
 
 	cache, err := NewCache(db, CacheConfig{
 		StateDir:    tmpDir,
+		CacheTTL:    time.Hour,
 		NegativeTTL: 5 * time.Minute,
 	})
 	if err != nil {

internal/imgcache/urlparser.go

@@ -7,8 +7,6 @@ import (
 	"regexp"
 	"strconv"
 	"strings"
-
-	"sneak.berlin/go/pixa/internal/imageprocessor"
 )
 
 // URL parsing errors.
@@ -22,9 +20,8 @@ var (
 	ErrPathTraversal     = errors.New("path traversal detected")
 )
 
-// MaxDimension is the maximum allowed width or height, the same as the image
-// processor's maximum for an output image.
-const MaxDimension = imageprocessor.MaxOutputDimension
+// MaxDimension is the maximum allowed width or height.
+const MaxDimension = 8192
 
 // ValidateDimension checks one requested width or height; name ("width" or
 // "height") appears in the error. 0 means "original size" and is valid.
@@ -41,10 +38,8 @@ func ValidateDimension(name string, value int) error {
 	return nil
 }
 
-// sizeFormatRegex matches patterns like "800x600.webp", "0x0.jpeg", "orig.png",
-// and a size with no format, such as "800x600" or "orig"
-var sizeFormatRegex = regexp.MustCompile(
-	`^(\d+)x(\d+)(?:\.(\w+))?$|^(orig)(?:\.(\w+))?$`)
+// sizeFormatRegex matches patterns like "800x600.webp", "0x0.jpeg", "orig.png"
+var sizeFormatRegex = regexp.MustCompile(`^(\d+)x(\d+)\.(\w+)$|^(orig)\.(\w+)$`)
 
 // ParsedURL contains the parsed components of an image proxy URL.
 type ParsedURL struct {
@@ -61,13 +56,12 @@ type ParsedURL struct {
 }
 
 // ParseImagePath parses the path captured by chi's wildcard:
-// <host>/<path>/<size>.<format>, or <host>/<path>/<size> for JPEG XL
+// <host>/<path>/<size>.<format>
 // This is the primary entry point when using chi routing.
 // Examples:
 //   - cdn.example.com/photos/cat.jpg/800x600.webp
 //   - cdn.example.com/photos/cat.jpg/0x0.jpeg
 //   - cdn.example.com/photos/cat.jpg/orig.png
-//   - cdn.example.com/photos/cat.jpg/800x600
 func ParseImagePath(path string) (*ParsedURL, error) {
 	// Strip leading slash if present (chi may include it)
 	path = strings.TrimPrefix(path, "/")
@@ -78,8 +72,7 @@ func ParseImagePath(path string) (*ParsedURL, error) {
 	return parseImageComponents(path)
 }
 
-// ParseImageURL parses a full URL path like /v1/image/<host>/<path>/<size>.<format>,
-// or /v1/image/<host>/<path>/<size> for JPEG XL
+// ParseImageURL parses a full URL path like /v1/image/<host>/<path>/<size>.<format>
 // Use ParseImagePath instead when working with chi's wildcard capture.
 func ParseImageURL(urlPath string) (*ParsedURL, error) {
 	// Remove the /v1/image/ prefix
@@ -96,8 +89,7 @@ func ParseImageURL(urlPath string) (*ParsedURL, error) {
 	return parseImageComponents(remainder)
 }
 
-// parseImageComponents parses <host>/<path>/<size>.<format>, or
-// <host>/<path>/<size> for JPEG XL.
+// parseImageComponents parses <host>/<path>/<size>.<format> structure.
 func parseImageComponents(remainder string) (*ParsedURL, error) {
 	// Check for path traversal before any other processing
 	err := checkPathTraversal(remainder)
@@ -105,7 +97,7 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 		return nil, err
 	}
 
-	// Find the last path segment, which holds "size" or "size.format"
+	// Find the last path segment which contains size.format
 	lastSlash := strings.LastIndex(remainder, "/")
 	if lastSlash == -1 {
 		return nil, ErrMissingSize
@@ -220,7 +212,7 @@ func checkPathTraversal(path string) error {
 	return nil
 }
 
-// parseSizeFormat parses strings like "800x600.webp", "orig.png" or "800x600"
+// parseSizeFormat parses strings like "800x600.webp" or "orig.png"
 func parseSizeFormat(s string) (Size, ImageFormat, error) {
 	matches := sizeFormatRegex.FindStringSubmatch(s)
 	if matches == nil {
@@ -233,11 +225,11 @@ func parseSizeFormat(s string) (Size, ImageFormat, error) {
 	)
 
 	if matches[4] == "orig" {
-		// "orig" or "orig.format" pattern
+		// "orig.format" pattern
 		size = Size{Width: 0, Height: 0}
 		formatStr = matches[5]
 	} else {
-		// "WxH" or "WxH.format" pattern
+		// "WxH.format" pattern
 		width, err := strconv.Atoi(matches[1])
 		if err != nil {
 			return Size{}, "", ErrInvalidSize
@@ -262,11 +254,6 @@ func parseSizeFormat(s string) (Size, ImageFormat, error) {
 		return Size{}, "", err
 	}
 
-	// A URL that names no format is served, and signed, as JPEG XL
-	if formatStr == "" {
-		return size, FormatJXL, nil
-	}
-
 	format, err := parseFormat(formatStr)
 	if err != nil {
 		return Size{}, "", err
@@ -288,8 +275,6 @@ func parseFormat(s string) (ImageFormat, error) {
 		return FormatWebP, nil
 	case "avif":
 		return FormatAVIF, nil
-	case "jxl":
-		return FormatJXL, nil
 	case "gif":
 		return FormatGIF, nil
 	case "auto":

internal/magic/jpegxl_internal_test.go

@@ -1,58 +0,0 @@
-package magic
-
-import "testing"
-
-// testMIMEJXL is the MIME type of JPEG XL.
-const testMIMEJXL = "image/jxl"
-
-// TestDetectFormatJPEGXL verifies that both JPEG XL signatures, that of a
-// bare codestream and that of the container, are detected as image/jxl.
-func TestDetectFormatJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name string
-		data []byte
-	}{
-		{"codestream", pad(0xFF, 0x0A)},
-		{"container", pad(
-			0x00, 0x00, 0x00, 0x0C, 0x4A, 0x58, 0x4C, 0x20, 0x0D, 0x0A, 0x87, 0x0A,
-		)},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			got, err := DetectFormat(tt.data)
-			if err != nil || got != MIMETypeJXL {
-				t.Errorf("DetectFormat() = %q, %v, want %q", got, err, testMIMEJXL)
-			}
-
-			err = ValidateMagicBytes(tt.data, testMIMEJXL)
-			if err != nil {
-				t.Errorf("ValidateMagicBytes(%q) error = %v", testMIMEJXL, err)
-			}
-		})
-	}
-}
-
-// TestJPEGXLMIMEType verifies that image/jxl is a supported input type and
-// maps to and from the format jxl.
-func TestJPEGXLMIMEType(t *testing.T) {
-	t.Parallel()
-
-	if !IsSupportedMIMEType(testMIMEJXL) {
-		t.Errorf("IsSupportedMIMEType(%q) = false", testMIMEJXL)
-	}
-
-	format, ok := MIMEToImageFormat(testMIMEJXL)
-	if format != FormatJXL || !ok {
-		t.Errorf("MIMEToImageFormat(%q) = %q, %v, want %q, true",
-			testMIMEJXL, format, ok, FormatJXL)
-	}
-
-	if got := ImageFormatToMIME(FormatJXL); got != testMIMEJXL {
-		t.Errorf("ImageFormatToMIME(%q) = %q, want %q", FormatJXL, got, testMIMEJXL)
-	}
-}

internal/magic/magic.go

@@ -26,7 +26,6 @@ const (
 	MIMETypeWebP = MIMEType("image/webp")
 	MIMETypeGIF  = MIMEType("image/gif")
 	MIMETypeAVIF = MIMEType("image/avif")
-	MIMETypeJXL  = MIMEType("image/jxl")
 	MIMETypeSVG  = MIMEType("image/svg+xml")
 )
 
@@ -41,7 +40,6 @@ const (
 	FormatPNG      ImageFormat = "png"
 	FormatWebP     ImageFormat = "webp"
 	FormatAVIF     ImageFormat = "avif"
-	FormatJXL      ImageFormat = "jxl"
 	FormatGIF      ImageFormat = "gif"
 )
 
@@ -64,11 +62,6 @@ var (
 	// AVIF uses the ftyp box with brand "avif" or "avis"
 	// Format: size(4 bytes) + "ftyp" + brand(4 bytes)
 	magicFtyp = []byte{0x66, 0x74, 0x79, 0x70} // "ftyp"
-	// JPEG XL is a bare codestream or a codestream in a container
-	magicJXLCodestream = []byte{0xFF, 0x0A}
-	magicJXLContainer  = []byte{
-		0x00, 0x00, 0x00, 0x0C, 0x4A, 0x58, 0x4C, 0x20, 0x0D, 0x0A, 0x87, 0x0A,
-	}
 )
 
 // WebP identifier appears at offset 8 after RIFF header.
@@ -122,12 +115,6 @@ func DetectFormat(data []byte) (MIMEType, error) {
 		}
 	}
 
-	// Check JPEG XL (FF0A, or the 12-byte container signature)
-	if bytes.HasPrefix(data, magicJXLCodestream) ||
-		bytes.HasPrefix(data, magicJXLContainer) {
-		return MIMETypeJXL, nil
-	}
-
 	// Check SVG - look for XML declaration or SVG tag
 	if detectSVG(data) {
 		return MIMETypeSVG, nil
@@ -194,8 +181,7 @@ func normalizeMIMEType(mimeType string) string {
 func IsSupportedMIMEType(mimeType string) bool {
 	normalized := normalizeMIMEType(mimeType)
 	switch MIMEType(normalized) {
-	case MIMETypeJPEG, MIMETypePNG, MIMETypeWebP, MIMETypeGIF, MIMETypeAVIF,
-		MIMETypeJXL, MIMETypeSVG:
+	case MIMETypeJPEG, MIMETypePNG, MIMETypeWebP, MIMETypeGIF, MIMETypeAVIF, MIMETypeSVG:
 		return true
 	default:
 		return false
@@ -240,8 +226,6 @@ func MIMEToImageFormat(mimeType string) (ImageFormat, bool) {
 		return FormatGIF, true
 	case MIMETypeAVIF:
 		return FormatAVIF, true
-	case MIMETypeJXL:
-		return FormatJXL, true
 	case MIMETypeSVG:
 		// SVG has no corresponding output format.
 		return "", false
@@ -263,8 +247,6 @@ func ImageFormatToMIME(format ImageFormat) string {
 		return string(MIMETypeGIF)
 	case FormatAVIF:
 		return string(MIMETypeAVIF)
-	case FormatJXL:
-		return string(MIMETypeJXL)
 	case FormatOriginal:
 		// Original format passes content through unchanged.
 		return mimeOctetStream

internal/middleware/middleware.go

@@ -98,10 +98,9 @@ func (s *Middleware) ClientIP() func(http.Handler) http.Handler {
 // holds whole; an IPv4-mapped address (::ffff:a.b.c.d) is counted as the
 // IPv4 address it carries, since every such address falls in the same /64.
 // Counts are kept only for the current and the previous window, so memory
-// stays bounded. limitHandler writes the 429 after Retry-After is set; nil
-// keeps the rate limit library's plain-text "Too Many Requests".
+// stays bounded.
 func (s *Middleware) RateLimit(
-	requestLimit int, window time.Duration, limitHandler http.HandlerFunc,
+	requestLimit int, window time.Duration,
 ) func(http.Handler) http.Handler {
 	return httprate.LimitBy(requestLimit, window,
 		func(r *http.Request) (string, error) {
@@ -113,8 +112,7 @@ func (s *Middleware) RateLimit(
 			}
 
 			return httprate.CanonicalizeIP(ip), nil
-		},
-		httprate.WithLimitHandler(limitHandler))
+		})
 }
 
 // requestIDPattern is what a request's own X-Request-Id must look like to be

internal/server/computed_side_internal_test.go

@@ -1,153 +0,0 @@
-package server
-
-import (
-	"bytes"
-	"encoding/json"
-	"image/jpeg"
-	"net/http"
-	"net/http/httptest"
-	"testing"
-
-	"sneak.berlin/go/pixa/internal/encurl"
-	"sneak.berlin/go/pixa/internal/imgcache"
-)
-
-// TestImageProxyRefusesComputedSideAboveMaximum requests sizes of a 3000x600
-// and a 600x3000 PNG through both image routes. A size with one side 0, whose
-// side computed from the source's proportions would be above 8192, is refused
-// with 400 and the JSON error body. The sizes after those refusals are served
-// as before, which also shows that a refusal is not cached as a failed fetch of
-// the source: orig, a size with both sides given, and a size with one side 0
-// whose computed side stays within 8192.
-func TestImageProxyRefusesComputedSideAboveMaximum(t *testing.T) {
-	t.Parallel()
-
-	// The upstream paths of the two sources
-	const (
-		widePath = "/wide.png"
-		tallPath = "/tall.png"
-	)
-
-	wide := encodeTestPNG(t, 3000, 600)
-	tall := encodeTestPNG(t, 600, 3000)
-
-	upstream := httptest.NewServer(http.HandlerFunc(
-		func(w http.ResponseWriter, r *http.Request) {
-			w.Header().Set("Content-Type", "image/png")
-
-			if r.URL.Path == tallPath {
-				_, _ = w.Write(tall)
-
-				return
-			}
-
-			_, _ = w.Write(wide)
-		}))
-	t.Cleanup(upstream.Close)
-
-	s, _, _ := startImageProxy(t, upstream)
-
-	generator, err := encurl.NewGenerator(testSigningKey)
-	if err != nil {
-		t.Fatalf("encurl.NewGenerator: %v", err)
-	}
-
-	tests := []struct {
-		path string
-		// size is the size of the /v1/image/ URL, and width and height are
-		// those of the encrypted URL
-		size          string
-		width, height int
-		// wantWidth and wantHeight are the served image's, 0 for a refusal
-		wantWidth, wantHeight int
-	}{
-		{widePath, "0x8192", 0, 8192, 0, 0},
-		{tallPath, "8192x0", 8192, 0, 0, 0},
-		{widePath, "orig", 0, 0, 3000, 600},
-		{widePath, "300x200", 300, 200, 300, 200},
-		{widePath, "0x300", 0, 300, 1500, 300},
-		{tallPath, "300x0", 300, 0, 300, 1500},
-	}
-
-	for _, tt := range tests {
-		token, err := generator.Generate(&encurl.Payload{
-			SourceHost: upstreamHost, SourcePath: tt.path,
-			Width: tt.width, Height: tt.height, Format: imgcache.FormatJPEG,
-		})
-		if err != nil {
-			t.Fatalf("encurl Generate: %v", err)
-		}
-
-		for _, target := range []string{
-			"/v1/image/" + upstreamHost + tt.path + "/" + tt.size + ".jpeg",
-			"/v1/e/" + token + "/img.jpg",
-		} {
-			rec := httptest.NewRecorder()
-			s.ServeHTTP(rec, httptest.NewRequestWithContext(
-				t.Context(), http.MethodGet, target, nil))
-			t.Logf("GET %s: %d, Content-Type %s",
-				target, rec.Code, rec.Header().Get("Content-Type"))
-
-			if tt.wantWidth == 0 {
-				checkSizeRefused(t, rec)
-			} else {
-				checkServedSize(t, rec, tt.wantWidth, tt.wantHeight)
-			}
-		}
-	}
-}
-
-// checkSizeRefused checks that rec answers 400 with the JSON error body that
-// refuses a size whose side computed from the source's proportions is above
-// 8192.
-func checkSizeRefused(t *testing.T, rec *httptest.ResponseRecorder) {
-	t.Helper()
-
-	const wantError = "size too large for the source: " +
-		"the side computed from its proportions is above 8192"
-
-	var body struct {
-		Error  string `json:"error"`
-		Status int    `json:"status"`
-	}
-
-	err := json.Unmarshal(rec.Body.Bytes(), &body)
-	if err != nil {
-		t.Errorf("status %d, body is not JSON: %v", rec.Code, err)
-
-		return
-	}
-
-	if rec.Code != http.StatusBadRequest || body.Status != http.StatusBadRequest ||
-		body.Error != wantError {
-		t.Errorf("status %d, body %+v, want %d and the error %q",
-			rec.Code, body, http.StatusBadRequest, wantError)
-	}
-}
-
-// checkServedSize checks that rec answers 200 with a JPEG of wantWidth by
-// wantHeight.
-func checkServedSize(
-	t *testing.T, rec *httptest.ResponseRecorder, wantWidth, wantHeight int,
-) {
-	t.Helper()
-
-	if rec.Code != http.StatusOK {
-		t.Errorf("status %d, want %d; body %s",
-			rec.Code, http.StatusOK, rec.Body.String())
-
-		return
-	}
-
-	served, err := jpeg.DecodeConfig(bytes.NewReader(rec.Body.Bytes()))
-	if err != nil {
-		t.Errorf("decoding the served JPEG: %v", err)
-
-		return
-	}
-
-	if served.Width != wantWidth || served.Height != wantHeight {
-		t.Errorf("served %dx%d, want %dx%d",
-			served.Width, served.Height, wantWidth, wantHeight)
-	}
-}

internal/server/fit_outside_internal_test.go

@@ -1,91 +0,0 @@
-package server
-
-import (
-	"fmt"
-	"net/http"
-	"net/http/httptest"
-	"testing"
-
-	"sneak.berlin/go/pixa/internal/encurl"
-	"sneak.berlin/go/pixa/internal/imgcache"
-)
-
-// TestImageProxyRefusesFitOutsideAboveMaximum requests sizes with fit=outside
-// through both image routes. fit=outside scales the source to cover the size,
-// and so past it on one side: a size for which that side would be above 8192
-// is refused with 400 and the JSON error body, whether it is the width or the
-// height, and a size for which it stays within 8192 is served at the scaled
-// size.
-func TestImageProxyRefusesFitOutsideAboveMaximum(t *testing.T) {
-	t.Parallel()
-
-	// The upstream paths of the sources
-	const (
-		widePath   = "/wide.png"
-		rowPath    = "/row.png"
-		columnPath = "/column.png"
-	)
-
-	sources := map[string][]byte{
-		widePath:   encodeTestPNG(t, 3000, 600),
-		rowPath:    encodeTestPNG(t, 8192, 1),
-		columnPath: encodeTestPNG(t, 1, 8192),
-	}
-
-	upstream := httptest.NewServer(http.HandlerFunc(
-		func(w http.ResponseWriter, r *http.Request) {
-			w.Header().Set("Content-Type", "image/png")
-			_, _ = w.Write(sources[r.URL.Path])
-		}))
-	t.Cleanup(upstream.Close)
-
-	s, _, _ := startImageProxy(t, upstream)
-
-	generator, err := encurl.NewGenerator(testSigningKey)
-	if err != nil {
-		t.Fatalf("encurl.NewGenerator: %v", err)
-	}
-
-	tests := []struct {
-		path          string
-		width, height int
-		// wantWidth and wantHeight are the served image's, 0 for a refusal
-		wantWidth, wantHeight int
-	}{
-		{widePath, 1, 8192, 0, 0},
-		{rowPath, 1, 8192, 0, 0},
-		{columnPath, 8192, 1, 0, 0},
-		{widePath, 1, 1200, 6000, 1200},
-	}
-
-	for _, tt := range tests {
-		token, err := generator.Generate(&encurl.Payload{
-			SourceHost: upstreamHost, SourcePath: tt.path,
-			Width: tt.width, Height: tt.height, Format: imgcache.FormatJPEG,
-			FitMode: imgcache.FitOutside,
-		})
-		if err != nil {
-			t.Fatalf("encurl Generate: %v", err)
-		}
-
-		size := fmt.Sprintf("%dx%d", tt.width, tt.height)
-
-		for _, target := range []string{
-			"/v1/image/" + upstreamHost + tt.path + "/" + size +
-				".jpeg?fit=outside",
-			"/v1/e/" + token + "/img.jpg",
-		} {
-			rec := httptest.NewRecorder()
-			s.ServeHTTP(rec, httptest.NewRequestWithContext(
-				t.Context(), http.MethodGet, target, nil))
-			t.Logf("GET %s: %d, Content-Type %s",
-				target, rec.Code, rec.Header().Get("Content-Type"))
-
-			if tt.wantWidth == 0 {
-				checkSizeRefused(t, rec)
-			} else {
-				checkServedSize(t, rec, tt.wantWidth, tt.wantHeight)
-			}
-		}
-	}
-}

internal/server/image_rate_limit_internal_test.go

@@ -1,204 +0,0 @@
-package server
-
-import (
-	"encoding/json"
-	"net/http"
-	"net/http/httptest"
-	"strconv"
-	"testing"
-
-	"sneak.berlin/go/pixa/internal/config"
-)
-
-// requestImageFrom sends method path to s from remoteAddr and returns the
-// response. The image handlers refuse an unsigned image URL with 401 and a
-// token they cannot decrypt with 400, so either status shows the limit let
-// the request through.
-func requestImageFrom(
-	t *testing.T, s *Server, method, path, remoteAddr string,
-) *httptest.ResponseRecorder {
-	t.Helper()
-
-	req := httptest.NewRequestWithContext(t.Context(), method, path, nil)
-	req.RemoteAddr = remoteAddr
-
-	rec := httptest.NewRecorder()
-	s.ServeHTTP(rec, req)
-
-	return rec
-}
-
-// TestImageRequestLimitRefusesRequestOverLimit verifies that GET and HEAD on
-// both image routes count toward one limit per client, and that the request
-// after image_requests_per_minute of them is refused with 429 and a
-// Retry-After header.
-func TestImageRequestLimitRefusesRequestOverLimit(t *testing.T) {
-	t.Parallel()
-
-	requests := []struct {
-		method string
-		path   string
-		want   int
-	}{
-		{http.MethodGet, unsignedImagePath, http.StatusUnauthorized},
-		{http.MethodHead, unsignedImagePath, http.StatusUnauthorized},
-		{http.MethodGet, encryptedImagePath, http.StatusBadRequest},
-	}
-
-	s := newTestServer(t)
-	s.config.ImageRequestsPerMinute = len(requests)
-	s.SetupRoutes()
-
-	for _, tc := range requests {
-		rec := requestImageFrom(t, s, tc.method, tc.path, firstClient)
-		if rec.Code != tc.want {
-			t.Fatalf("%s %s within the limit status = %d, want %d",
-				tc.method, tc.path, rec.Code, tc.want)
-		}
-	}
-
-	rec := requestImageFrom(t, s, http.MethodHead, encryptedImagePath, firstClient)
-	if rec.Code != http.StatusTooManyRequests {
-		t.Fatalf("request over the limit status = %d, want %d",
-			rec.Code, http.StatusTooManyRequests)
-	}
-
-	retryAfter := rec.Header().Get("Retry-After")
-
-	seconds, err := strconv.Atoi(retryAfter)
-	if err != nil || seconds <= 0 {
-		t.Errorf("Retry-After = %q, want a positive number of seconds",
-			retryAfter)
-	}
-}
-
-// TestImageRequestLimitAnswersWithJSONError verifies that the 429 for a
-// request over the limit carries Retry-After and the JSON error body the
-// image routes send for their other errors.
-func TestImageRequestLimitAnswersWithJSONError(t *testing.T) {
-	t.Parallel()
-
-	s := newTestServer(t)
-	s.config.ImageRequestsPerMinute = 1
-	s.SetupRoutes()
-
-	requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-
-	rec := requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-	t.Logf("status %d, body %s", rec.Code, rec.Body.String())
-
-	if rec.Code != http.StatusTooManyRequests {
-		t.Fatalf("request over the limit status = %d, want %d",
-			rec.Code, http.StatusTooManyRequests)
-	}
-
-	retryAfter := rec.Header().Get("Retry-After")
-
-	seconds, err := strconv.Atoi(retryAfter)
-	if err != nil || seconds <= 0 {
-		t.Errorf("Retry-After = %q, want a positive number of seconds",
-			retryAfter)
-	}
-
-	contentType := rec.Header().Get("Content-Type")
-	if contentType != "application/json" {
-		t.Errorf("Content-Type = %q, want %q", contentType, "application/json")
-	}
-
-	var body struct {
-		Error     string `json:"error"`
-		Status    int    `json:"status"`
-		Timestamp string `json:"timestamp"`
-	}
-
-	err = json.NewDecoder(rec.Body).Decode(&body)
-	if err != nil {
-		t.Fatalf("body is not JSON: %v", err)
-	}
-
-	if body.Error == "" || body.Status != http.StatusTooManyRequests ||
-		body.Timestamp == "" {
-		t.Errorf("body = %+v, want an error, status %d and a timestamp",
-			body, http.StatusTooManyRequests)
-	}
-}
-
-// TestImageRequestLimitCountsClientsSeparately verifies that one client going
-// over the limit does not limit another.
-func TestImageRequestLimitCountsClientsSeparately(t *testing.T) {
-	t.Parallel()
-
-	s := newTestServer(t)
-	s.config.ImageRequestsPerMinute = 1
-	s.SetupRoutes()
-
-	rec := requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-	if rec.Code != http.StatusUnauthorized {
-		t.Fatalf("first client's first request status = %d, want %d",
-			rec.Code, http.StatusUnauthorized)
-	}
-
-	rec = requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-	if rec.Code != http.StatusTooManyRequests {
-		t.Fatalf("first client's second request status = %d, want %d",
-			rec.Code, http.StatusTooManyRequests)
-	}
-
-	rec = requestImageFrom(t, s, http.MethodGet, unsignedImagePath, secondClient)
-	if rec.Code != http.StatusUnauthorized {
-		t.Errorf("second client's first request status = %d, want %d",
-			rec.Code, http.StatusUnauthorized)
-	}
-}
-
-// TestImageRequestLimitZeroLetsEveryRequestThrough verifies that with
-// image_requests_per_minute set to 0 no image request is refused with 429,
-// not even past the default limit.
-func TestImageRequestLimitZeroLetsEveryRequestThrough(t *testing.T) {
-	t.Parallel()
-
-	s := newTestServer(t)
-	s.config.ImageRequestsPerMinute = 0
-	s.SetupRoutes()
-
-	for request := range config.DefaultImageRequestsPerMinute + 1 {
-		rec := requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-		if rec.Code != http.StatusUnauthorized {
-			t.Fatalf("request %d status = %d, want %d",
-				request+1, rec.Code, http.StatusUnauthorized)
-		}
-	}
-}
-
-// TestImageRequestLimitDoesNotCountPreflight verifies that a browser's CORS
-// preflight request to an image route is answered without being counted, so
-// a client that has sent several still gets its image request through.
-func TestImageRequestLimitDoesNotCountPreflight(t *testing.T) {
-	t.Parallel()
-
-	s := newTestServer(t)
-	s.config.AccessControlAllowOrigin = config.DefaultAccessControlAllowOrigin
-	s.config.ImageRequestsPerMinute = 1
-	s.SetupRoutes()
-
-	for range 3 {
-		req := httptest.NewRequestWithContext(
-			t.Context(), http.MethodOptions, unsignedImagePath, nil)
-		req.RemoteAddr = firstClient
-		req.Header.Set("Origin", "https://app.example.com")
-		req.Header.Set("Access-Control-Request-Method", http.MethodGet)
-
-		rec := httptest.NewRecorder()
-		s.ServeHTTP(rec, req)
-
-		if rec.Code != http.StatusOK {
-			t.Fatalf("preflight status = %d, want %d", rec.Code, http.StatusOK)
-		}
-	}
-
-	rec := requestImageFrom(t, s, http.MethodGet, unsignedImagePath, firstClient)
-	if rec.Code != http.StatusUnauthorized {
-		t.Errorf("image request after preflights status = %d, want %d",
-			rec.Code, http.StatusUnauthorized)
-	}
-}

internal/server/jpegxl_internal_test.go

@@ -1,72 +0,0 @@
-package server
-
-import (
-	"net/http"
-	"net/http/httptest"
-	"os"
-	"testing"
-
-	"github.com/davidbyttow/govips/v2/vips"
-)
-
-// TestImageProxyFlowJPEGXL requests the JPEG XL testdata/red.jxl, 64x48 and
-// made with libvips, through pixa's router, upstream fetcher, image processor
-// and disk cache: resized as PNG, resized as JPEG XL, and at its own size and
-// format, which is JPEG XL. The second request for each URL is a cache hit.
-func TestImageProxyFlowJPEGXL(t *testing.T) {
-	t.Parallel()
-
-	source, err := os.ReadFile("testdata/red.jxl")
-	if err != nil {
-		t.Fatalf("reading the test image: %v", err)
-	}
-
-	upstream := httptest.NewServer(http.HandlerFunc(
-		func(w http.ResponseWriter, _ *http.Request) {
-			w.Header().Set("Content-Type", "image/jxl")
-			_, _ = w.Write(source)
-		}))
-	t.Cleanup(upstream.Close)
-
-	s, _, _ := startImageProxy(t, upstream)
-
-	tests := []struct {
-		sizeFormat    string // the <size>.<format> part of the image URL
-		contentType   string
-		imageType     vips.ImageType
-		width, height int
-	}{
-		{"32x24.png", "image/png", vips.ImageTypePNG, 32, 24},
-		{"32x24.jxl", "image/jxl", vips.ImageTypeJXL, 32, 24},
-		{"orig.orig", "image/jxl", vips.ImageTypeJXL, 64, 48},
-	}
-
-	for _, tt := range tests {
-		target := "/v1/image/" + upstreamHost + "/red.jxl/" + tt.sizeFormat
-
-		for _, wantCache := range []string{"MISS", "HIT"} {
-			rec := getImage(t, s, target)
-			gotType := rec.Header().Get("Content-Type")
-			gotCache := rec.Header().Get("X-Pixa-Cache")
-
-			if gotType != tt.contentType || gotCache != wantCache {
-				t.Errorf("%s: %s, X-Pixa-Cache %s, want %s, %s",
-					target, gotType, gotCache, tt.contentType, wantCache)
-			}
-
-			img, err := vips.NewImageFromBuffer(rec.Body.Bytes())
-			if err != nil {
-				t.Fatalf("%s: loading the image: %v", target, err)
-			}
-
-			if img.Format() != tt.imageType ||
-				img.Width() != tt.width || img.Height() != tt.height {
-				t.Errorf("%s: %s %dx%d, want %s %dx%d", target,
-					vips.ImageTypes[img.Format()], img.Width(), img.Height(),
-					vips.ImageTypes[tt.imageType], tt.width, tt.height)
-			}
-
-			img.Close()
-		}
-	}
-}

internal/server/routes.go

@@ -66,7 +66,7 @@ func (s *Server) SetupRoutes() {
 		r.Use(s.h.LimitBody(handlers.MaxFormBytes))
 		r.Use(s.h.CSRF())
 		r.Get("/", s.h.HandleRoot())
-		r.With(s.mw.RateLimit(LoginAttemptsPerMinute, time.Minute, nil)).
+		r.With(s.mw.RateLimit(LoginAttemptsPerMinute, time.Minute)).
 			Post("/", s.h.HandleRoot())
 		r.Post("/generate", s.h.HandleGenerateURL())
 	})
@@ -88,18 +88,8 @@ func (s *Server) SetupRoutes() {
 		r.Group(func(r chi.Router) {
 			r.Use(s.refuseDuringMaintenance)
 
-			// Limited per client, as the login POST is, but the 429 has
-			// the image routes' JSON error body; 0 turns the limit off.
-			// The CORS middleware answers a preflight before it gets
-			// here, so a preflight is not counted.
-			if s.config.ImageRequestsPerMinute > 0 {
-				r.Use(s.mw.RateLimit(s.config.ImageRequestsPerMinute,
-					time.Minute, s.h.HandleTooManyRequests()))
-			}
-
 			// Main image proxy route
-			// /v1/image/<host>/<path>/<width>x<height>.<format>, or with no
-			// format /v1/image/<host>/<path>/<width>x<height>
+			// /v1/image/<host>/<path>/<width>x<height>.<format>
 			r.Get("/image/*", s.h.HandleImage())
 			r.Head("/image/*", s.h.HandleImage())
 

internal/server/svg_as_avif_internal_test.go

@@ -1,71 +0,0 @@
-package server
-
-import (
-	"io"
-	"net/http"
-	"net/http/httptest"
-	"strings"
-	"testing"
-
-	"sneak.berlin/go/pixa/internal/encurl"
-	"sneak.berlin/go/pixa/internal/imgcache"
-)
-
-// svgServedAsAVIF is an SVG whose first bytes pass the first-bytes check for
-// AVIF: its XML comment puts "ftypavis" at bytes 4 to 11, where an AVIF file
-// has its ftyp box and brand. libvips would load it as SVG.
-const svgServedAsAVIF = `<!--ftypavis--><svg xmlns="http://www.w3.org/2000/svg" ` +
-	`width="64" height="48"><rect width="64" height="48"/></svg>`
-
-// TestImageProxyRefusesSVGServedAsAVIF requests svgServedAsAVIF, which the
-// upstream answers as image/avif, through both image routes, resized as PNG
-// and in its own format (orig). Each request is answered 415, as for an SVG
-// source, never with an image.
-func TestImageProxyRefusesSVGServedAsAVIF(t *testing.T) {
-	t.Parallel()
-
-	upstream := httptest.NewServer(http.HandlerFunc(
-		func(w http.ResponseWriter, _ *http.Request) {
-			w.Header().Set("Content-Type", "image/avif")
-			_, _ = io.WriteString(w, svgServedAsAVIF)
-		}))
-	t.Cleanup(upstream.Close)
-
-	s, _, _ := startImageProxy(t, upstream)
-
-	generator, err := encurl.NewGenerator(testSigningKey)
-	if err != nil {
-		t.Fatalf("encurl.NewGenerator: %v", err)
-	}
-
-	encryptedURL := func(format imgcache.ImageFormat) string {
-		token, err := generator.Generate(&encurl.Payload{
-			SourceHost: upstreamHost, SourcePath: "/drawing.avif",
-			Width: 32, Height: 24, Format: format,
-		})
-		if err != nil {
-			t.Fatalf("encurl Generate: %v", err)
-		}
-
-		return "/v1/e/" + token + "/drawing." + string(format)
-	}
-
-	for _, target := range []string{
-		"/v1/image/" + upstreamHost + "/drawing.avif/32x24.png",
-		"/v1/image/" + upstreamHost + "/drawing.avif/64x48.orig",
-		encryptedURL(imgcache.FormatPNG),
-		encryptedURL(imgcache.FormatOriginal),
-	} {
-		rec := httptest.NewRecorder()
-		s.ServeHTTP(rec, httptest.NewRequestWithContext(
-			t.Context(), http.MethodGet, target, nil))
-		t.Logf("GET %s: %d, Content-Type %s, body %q",
-			target, rec.Code, rec.Header().Get("Content-Type"), rec.Body.String())
-
-		if rec.Code != http.StatusUnsupportedMediaType ||
-			!strings.Contains(rec.Body.String(), "unsupported source format") {
-			t.Errorf("GET %s: %d %q, want %d unsupported source format",
-				target, rec.Code, rec.Body.String(), http.StatusUnsupportedMediaType)
-		}
-	}
-}

internal/server/svg_internal_test.go

@@ -1,41 +0,0 @@
-package server
-
-import (
-	"io"
-	"net/http"
-	"net/http/httptest"
-	"testing"
-)
-
-// TestImageProxyRefusesSVG requests an image the upstream answers as SVG,
-// in its own format (orig) and resized as PNG, through pixa's router,
-// upstream fetcher and image processor. pixa does not accept SVG as a
-// source, so each request is answered 415, never with an image.
-func TestImageProxyRefusesSVG(t *testing.T) {
-	t.Parallel()
-
-	upstream := httptest.NewServer(http.HandlerFunc(
-		func(w http.ResponseWriter, _ *http.Request) {
-			w.Header().Set("Content-Type", "image/svg+xml")
-			_, _ = io.WriteString(w, `<svg xmlns="http://www.w3.org/2000/svg" `+
-				`width="64" height="48"><rect width="64" height="48"/></svg>`)
-		}))
-	t.Cleanup(upstream.Close)
-
-	s, _, _ := startImageProxy(t, upstream)
-
-	for _, sizeFormat := range []string{"64x48.orig", "32x24.png"} {
-		target := "/v1/image/" + upstreamHost + "/drawing.svg/" + sizeFormat
-
-		rec := httptest.NewRecorder()
-		s.ServeHTTP(rec, httptest.NewRequestWithContext(
-			t.Context(), http.MethodGet, target, nil))
-		t.Logf("GET %s: %d, Content-Type %s, body %s",
-			target, rec.Code, rec.Header().Get("Content-Type"), rec.Body.String())
-
-		if rec.Code != http.StatusUnsupportedMediaType {
-			t.Errorf("GET %s status = %d, want %d",
-				target, rec.Code, http.StatusUnsupportedMediaType)
-		}
-	}
-}

internal/templates/generator.html

@@ -95,12 +95,11 @@
                     </label>
                     <select id="format" name="format">
                         <option value="orig" {{if eq .FormFormat "orig"}}selected{{end}}>Original</option>
-                        <option value="auto" {{if eq .FormFormat "auto"}}selected{{end}}>Auto (JPEG XL, AVIF, WebP or JPEG)</option>
+                        <option value="auto" {{if eq .FormFormat "auto"}}selected{{end}}>Auto (AVIF, WebP or JPEG)</option>
                         <option value="jpeg" {{if eq .FormFormat "jpeg"}}selected{{end}}>JPEG</option>
                         <option value="png" {{if eq .FormFormat "png"}}selected{{end}}>PNG</option>
                         <option value="webp" {{if eq .FormFormat "webp"}}selected{{end}}>WebP</option>
                         <option value="avif" {{if eq .FormFormat "avif"}}selected{{end}}>AVIF</option>
-                        <option value="jxl" {{if or (eq .FormFormat "jxl") (eq .FormFormat "")}}selected{{end}}>JPEG XL</option>
                         <option value="gif" {{if eq .FormFormat "gif"}}selected{{end}}>GIF</option>
                     </select>
                 </div>

script/loadtest

@@ -94,8 +94,7 @@ main() {
 }
 
 # start_containers starts a new origin and a new pixad, and waits up to 30
-# seconds for pixad's health check to pass. pixad sees all of vegeta's
-# requests come from one address, so its image request limit is off.
+# seconds for pixad's health check to pass.
 start_containers() {
     docker run -d --name "$run-origin" \
         --network "$run" --network-alias origin \
@@ -105,7 +104,6 @@ start_containers() {
         --network "$run" -p 127.0.0.1::8080 --health-interval=1s \
         -e PIXA_SIGNING_KEY="$(head -c 32 /dev/urandom | base64)" \
         -e PIXA_ALLOWLIST_HOSTS=origin -e PIXA_ALLOW_HTTP=true \
-        -e PIXA_IMAGE_REQUESTS_PER_MINUTE=0 \
         "$image" >/dev/null
 
     waited=0