Fetch an IPv6 source host written without a port (closes #295)

The fetcher's check of a source URL cut a port off the host with
net.SplitHostPort, which fails when an IPv6 address in brackets has no
port, so the brackets stayed on, the name lookup failed and the request
answered 500. The check now parses the URL and takes the host from
Hostname(), which drops the brackets with or without a port, so the
address is looked up and a private one is refused with 403.

Model: opus-5-5

README.md

@@ -694,10 +694,7 @@ Key settings in more detail:
   and generator pages. Default: empty
 - `blocked_networks` — list of CIDR ranges to refuse for SSRF protection, added
   to the always-enforced built-in ranges (loopback, private, link-local, CGNAT,
-  benchmark, NAT64, and the like); an invalid CIDR aborts startup. An IPv6
+  benchmark, NAT64, and the like); an invalid CIDR aborts startup
-  address in the IPv4-mapped form (`::ffff:a.b.c.d`) is matched only as the IPv4
-  address it holds, so an IPv6 range such as `::/0` refuses neither it nor a
-  plain IPv4 address
 - `trusted_proxies` — list of CIDR ranges of the reverse proxies in front of
   pixa. `X-Forwarded-For` is believed only when the direct peer falls inside one
   of these ranges; the logged and login-recorded client address is then the
@@ -728,14 +725,11 @@ Key settings in more detail:
 - `signing_key` — HMAC secret for URL signatures
 - `db_url` — the SQLite database to open; omitted, it is
   `file:<state_dir>/state.sqlite3?_pragma=journal_mode(WAL)`, which keeps the
-  database in WAL mode. `state_dir` is percent-encoded in it, so a `%`, `?` or
+  database in WAL mode. pixa opens one connection to it, so its own reads and
-  `#` in the name is written as `%25`, `%3F` or `%23`. For a `state_dir` of `/`
+  writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to any
-  or one starting with `//` it starts `file:////`, so SQLite does not read the
+  `db_url`, so a write that finds another program writing to the file waits up
-  first name in the path as a host. pixa opens one connection to it, so its own
+  to five seconds for it instead of failing. WAL mode comes only from the URL:
-  reads and writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to
+  keep `_pragma=journal_mode(WAL)` in one you set
-  any `db_url`, so a write that finds another program writing to the file waits
-  up to five seconds for it instead of failing. WAL mode comes only from the
-  URL: keep `_pragma=journal_mode(WAL)` in one you set
 - `cache_max_bytes` — disk cache size limit in bytes; `0` disables the disk
   cache entirely; omitted defaults to 75% of the sum of the free space on the
   filesystem containing `<state_dir>/cache/` and the bytes of source and

TODO.md

@@ -30,40 +30,12 @@ P2: security: per-origin rate limiting
 
 # Completed Steps
 
-- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
-  addresses refuses the local-use NAT64 range (`64:ff9b:1::/48`, RFC 8215) as it
-  refuses `64:ff9b::/96`, and refuses an IPv6 address in the IPv4-compatible
-  form (`::/96`) when `blocked_networks` contains either the address as written
-  or the IPv4 address it holds (closes #299). A source host such as
-  `[64:ff9b:1::a00:1]` was fetched, which on a network that runs NAT64 on that
-  range reaches the IPv4 address it holds, here `10.0.0.1`; and with
-  `203.0.113.0/24` in `blocked_networks`, `[::ffff:203.0.113.5]` was refused but
-  `[::203.0.113.5]` was fetched. Both now answer 403. The mapped form
-  (`::ffff:a.b.c.d`) is still matched only as the IPv4 address it holds: Go
-  keeps a plain IPv4 address in that form, and an IPv6 entry such as `::/0` must
-  not refuse every IPv4 address.
-- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
-  addresses judges an IPv6 address in the IPv4-compatible form (`::/96`), such
-  as `::127.0.0.1` or `::10.0.0.1`, by the IPv4 address in its last four bytes
-  (closes #297). It read only the mapped form (`::ffff:a.b.c.d`) as IPv4, so a
-  source host such as `[::127.0.0.1]` was checked as a public IPv6 address and
-  fetched, which on a network that routes it reaches the internal IPv4 host; it
-  is now refused with 403. The NAT64 form (`64:ff9b::/96`) was already refused
-  as a whole, as one of the built-in blocked ranges, and still is.
 - 2026-10-16 a source host that is an IPv6 address in brackets with no port,
   such as `[2001:db8::a]`, is fetched like one with a port, through `/v1/image/`
   and through an encrypted URL (closes #295). The fetcher's check of the source
   URL kept the brackets when no port followed them, could not look the host up,
   and the request answered 500. It now checks the address without brackets, so a
   private one is refused with 403, as with a port.
-- 2026-10-16 a `state_dir` whose name holds `%`, `?` or `#` keeps its database
-  at `state.sqlite3` in that directory (closes #290): the `db_url` derived from
-  it put the name into a `file:` URL as it was, so SQLite read `%41` as `A`, a
-  `?` or `#` ended the path early, and the journal mode parameter was lost. The
-  derived `db_url` is now built with Go's `net/url`, which writes those
-  characters as `%25`, `%3F` and `%23`. For a `state_dir` of `/` or one starting
-  with `//` it starts `file:////`, so SQLite no longer reads the first name in
-  the path as a host.
 - 2026-10-16 a size with one side `0` keeps the side computed from the source's
   proportions at 1 or more (closes #283): it was rounded down, so for a thin
   source it came out at 0, and libvips then made the size square. An 8192x1

internal/config/config.go

@@ -338,7 +338,8 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 				settingName(keyDBURL), errValueEmpty)
 		}
 
-		c.DBURL = defaultDBURL(c.StateDir)
+		// The driver sets the journal mode only through a _pragma parameter.
+		c.DBURL = fmt.Sprintf("file:%s/state.sqlite3?_pragma=journal_mode(WAL)", c.StateDir)
 	}
 
 	if loader.err != nil {
@@ -353,30 +354,6 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 	return c, nil
 }
 
-// defaultDBURL returns the db_url used when db_url is omitted: the file
-// state.sqlite3 in stateDir, in WAL mode, which the driver sets only
-// through a _pragma parameter. String() percent-encodes any %, ? or # in
-// the directory name, which SQLite decodes back, so the URL names exactly
-// this file. OmitHost writes file:/var/lib/pixa/... instead of
-// file:///var/lib/pixa/..., and keeps a relative stateDir from being read
-// as a host name. The path written into the URL is stateDir followed by
-// /state.sqlite3; when it starts with //, as it does for a stateDir of /
-// or one starting with //, the empty host is kept, so the URL starts
-// file://// and SQLite does not read the first name in the path as a
-// host.
-func defaultDBURL(stateDir string) string {
-	dbPath := stateDir + "/state.sqlite3"
-
-	dbURL := url.URL{
-		Scheme:   "file",
-		OmitHost: !strings.HasPrefix(dbPath, "//"),
-		Path:     dbPath,
-		RawQuery: "_pragma=journal_mode(WAL)",
-	}
-
-	return dbURL.String()
-}
-
 // validateKnownKeys rejects configuration files containing keys the
 // application does not understand, so typos fail at startup instead of
 // being silently ignored, and rejects keys that are explicitly set to

internal/config/config_validation_internal_test.go

@@ -135,104 +135,6 @@ func TestDefaultDBURLOpensTheDatabaseInWALMode(t *testing.T) {
 	}
 }
 
-// TestDerivedDBURLOpensStateDirHoldingURLCharacters opens the db_url
-// derived from a state_dir whose name holds %41, ? and #, and checks that
-// the database is state.sqlite3 in that directory, in WAL mode. Put into
-// a file: URL as it is, the name would lose its meaning: %41 is read as
-// A, and the path ends at the ?, which also loses the journal mode.
-func TestDerivedDBURLOpensStateDirHoldingURLCharacters(t *testing.T) {
-	t.Parallel()
-
-	stateDir := filepath.Join(t.TempDir(), "a%41b?c#d")
-
-	err := os.Mkdir(stateDir, 0o750)
-	if err != nil {
-		t.Fatalf("failed to create %q: %v", stateDir, err)
-	}
-
-	// Quoted so YAML takes the whole name as it is.
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: '"+stateDir+"'\n")
-	if err != nil {
-		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
-	}
-
-	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
-
-	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(stateDir, "state.sqlite3"))
-}
-
-// TestDerivedDBURLOpensStateDirStartingWithTwoSlashes opens the db_url
-// derived from a state_dir that starts with //, and checks that the
-// database is state.sqlite3 in that directory, in WAL mode. Written right
-// after file:, such a name gives a URL starting file://, and SQLite reads
-// the first directory name as a host and refuses to open it.
-func TestDerivedDBURLOpensStateDirStartingWithTwoSlashes(t *testing.T) {
-	t.Parallel()
-
-	dir := t.TempDir()
-	stateDir := "/" + dir
-
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: "+stateDir+"\n")
-	if err != nil {
-		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
-	}
-
-	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
-
-	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(dir, "state.sqlite3"))
-}
-
-// TestDerivedDBURLForRootStateDir checks the db_url derived from a
-// state_dir of /. The path written into the URL is then
-// //state.sqlite3, and written right after file: it gives a URL starting
-// file://, where SQLite reads state.sqlite3 as a host and refuses to open
-// it. The test only checks the URL, since it cannot write to /.
-func TestDerivedDBURLForRootStateDir(t *testing.T) {
-	t.Parallel()
-
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: /\n")
-	if err != nil {
-		t.Fatalf("config with state_dir / should be valid, got: %v", err)
-	}
-
-	t.Logf("state_dir / gives db_url %q", c.DBURL)
-
-	wantDBURL := "file:////state.sqlite3?_pragma=journal_mode(WAL)"
-	if c.DBURL != wantDBURL {
-		t.Errorf("DBURL = %q, want %q", c.DBURL, wantDBURL)
-	}
-}
-
-// checkDBURLOpensFileInWALMode opens dbURL with the SQLite driver pixad
-// uses, and checks that the database is in WAL mode and is the file
-// dbFile.
-func checkDBURLOpensFileInWALMode(t *testing.T, dbURL, dbFile string) {
-	t.Helper()
-
-	db, err := sql.Open("sqlite", dbURL)
-	if err != nil {
-		t.Fatalf("failed to open %q: %v", dbURL, err)
-	}
-
-	t.Cleanup(func() { _ = db.Close() })
-
-	var journalMode string
-
-	err = db.QueryRowContext(t.Context(), "PRAGMA journal_mode").Scan(&journalMode)
-	if err != nil {
-		t.Fatalf("failed to read the journal mode of %q: %v", dbURL, err)
-	}
-
-	if journalMode != "wal" {
-		t.Errorf("journal mode of %q = %q, want wal", dbURL, journalMode)
-	}
-
-	_, err = os.Stat(dbFile)
-	if err != nil {
-		t.Errorf("opening %q did not create %q: %v", dbURL, dbFile, err)
-	}
-}
-
 func TestExplicitValidValuesAreUsed(t *testing.T) {
 	t.Parallel()
 

internal/httpfetcher/httpfetcher.go

@@ -59,17 +59,15 @@ const (
 // builtinBlockedPrefixes are internal or special-use ranges that Go's
 // net.IP predicates (IsPrivate, IsLinkLocalUnicast, and the like) do not
 // already cover. They are always blocked, in addition to any
-// operator-supplied networks. IPv4-mapped and IPv4-compatible IPv6
+// operator-supplied networks. IPv4-mapped IPv6 addresses are unmapped
-// addresses are read as the IPv4 address they hold before matching, so
+// before matching, so these IPv4 ranges are caught in both forms.
-// these IPv4 ranges are caught in all three forms.
 //
 //nolint:gochecknoglobals // immutable built-in blocklist
 var builtinBlockedPrefixes = []netip.Prefix{
-	netip.MustParsePrefix("100.64.0.0/10"),  // RFC 6598 CGNAT / carrier-grade NAT
+	netip.MustParsePrefix("100.64.0.0/10"), // RFC 6598 CGNAT / carrier-grade NAT
-	netip.MustParsePrefix("192.0.0.0/24"),   // RFC 6890 IETF protocol assignments
+	netip.MustParsePrefix("192.0.0.0/24"),  // RFC 6890 IETF protocol assignments
-	netip.MustParsePrefix("198.18.0.0/15"),  // RFC 2544 benchmarking range
+	netip.MustParsePrefix("198.18.0.0/15"), // RFC 2544 benchmarking range
-	netip.MustParsePrefix("64:ff9b::/96"),   // RFC 6052 NAT64 (maps onto IPv4)
+	netip.MustParsePrefix("64:ff9b::/96"),  // RFC 6052 NAT64 (maps onto IPv4)
-	netip.MustParsePrefix("64:ff9b:1::/48"), // RFC 8215 local-use NAT64 (maps onto IPv4)
 }
 
 // Fetcher errors.
@@ -545,9 +543,6 @@ func isPrivateIP(ip net.IP) bool {
 		return true
 	}
 
-	// An IPv4-compatible IPv6 address is judged as the IPv4 address it holds
-	ip = ipv4CompatibleToIPv4(ip)
-
 	// Check for loopback
 	if ip.IsLoopback() {
 		return true
@@ -599,12 +594,7 @@ func isPrivateIP(ip net.IP) bool {
 }
 
 // isBlockedIP reports whether ip is refused, either by the built-in
-// internal-range check or by one of the operator-supplied prefixes. An
+// internal-range check or by one of the operator-supplied prefixes.
-// IPv4-compatible address (in ::/96) is refused when a prefix contains the
-// address as written or the IPv4 address it holds. An IPv4-mapped address (in
-// ::ffff:0:0/96) is matched only as the IPv4 address it holds: Go keeps a
-// plain IPv4 address in that form too, and an IPv6 prefix such as ::/0 must
-// not refuse every IPv4 address.
 func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 	if isPrivateIP(ip) {
 		return true
@@ -617,28 +607,11 @@ func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 
 	addr = addr.Unmap()
 
-	// ip read as IPv4 where it is or holds an IPv4 address, otherwise the
-	// zero netip.Addr, which no prefix contains. Matching asIPv4 as well as
-	// addr refuses more only for an IPv4-compatible address.
-	asIPv4, _ := netip.AddrFromSlice(ipv4CompatibleToIPv4(ip).To4())
-
 	return slices.ContainsFunc(blocked, func(prefix netip.Prefix) bool {
-		return prefix.Contains(addr) || prefix.Contains(asIPv4)
+		return prefix.Contains(addr)
 	})
 }
 
-// ipv4CompatibleToIPv4 returns the IPv4 address that an IPv4-compatible IPv6
-// address (in ::/96, such as ::127.0.0.1) holds in its last four bytes, and
-// any other address unchanged.
-func ipv4CompatibleToIPv4(ip net.IP) net.IP {
-	addr, ok := netip.AddrFromSlice(ip)
-	if ok && netip.MustParsePrefix("::/96").Contains(addr) {
-		return ip[12:]
-	}
-
-	return ip
-}
-
 // ssrfSafeDialer validates IP addresses against the built-in blocked ranges
 // before connecting. New wraps dialSSRFSafe with the operator-supplied
 // blocklist; this entry point enforces the built-in ranges alone.

internal/httpfetcher/httpfetcher_internal_test.go

@@ -186,44 +186,6 @@ func TestIsPrivateIP(t *testing.T) {
 	}
 }
 
-// TestIsPrivateIPJudgesEmbeddedIPv4Address checks IPv6 addresses that hold an
-// IPv4 address in their last four bytes: the IPv4-compatible form (::/96) and
-// the NAT64 form (64:ff9b::/96). One holding a loopback, private or
-// link-local IPv4 address is refused as that address is, and one holding a
-// public IPv4 address in the IPv4-compatible form passes.
-func TestIsPrivateIPJudgesEmbeddedIPv4Address(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		ip   string
-		want bool
-	}{
-		{"::127.0.0.1", true},       // loopback
-		{"::10.0.0.1", true},        // private
-		{"::169.254.169.254", true}, // link-local
-		{"64:ff9b::7f00:1", true},   // NAT64 form of 127.0.0.1
-		{"::8.8.8.8", false},        // public
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.ip, func(t *testing.T) {
-			t.Parallel()
-
-			ip := net.ParseIP(tc.ip)
-			if ip == nil {
-				t.Fatalf("failed to parse IP %q", tc.ip)
-			}
-
-			got := isPrivateIP(ip)
-			t.Logf("isPrivateIP(%s) = %v", ip, got)
-
-			if got != tc.want {
-				t.Errorf("isPrivateIP(%q) = %v, want %v", tc.ip, got, tc.want)
-			}
-		})
-	}
-}
-
 func TestValidateURL_RejectsNonHTTPS(t *testing.T) {
 	t.Parallel()
 

internal/server/image_proxy_internal_test.go

@@ -14,12 +14,10 @@ import (
 	"net"
 	"net/http"
 	"net/http/httptest"
-	"net/netip"
 	"os"
 	"path/filepath"
 	"sync/atomic"
 	"testing"
-	"time"
 
 	"go.uber.org/fx"
 	"go.uber.org/fx/fxtest"
@@ -185,57 +183,6 @@ func startImageProxy(
 	return s, db.DB(), stateDir
 }
 
-// startImageProxyWithBlockedNetworks starts the components pixad's fx app
-// builds, from a config with a fresh state directory and blockedNetworks as
-// blocked_networks. Unlike startImageProxy it provides no upstream fetcher, so
-// the handlers build the one pixad uses, which checks every address it
-// connects to against the built-in blocked ranges and blocked_networks. It
-// returns the server with its routes.
-func startImageProxyWithBlockedNetworks(
-	t *testing.T, blockedNetworks []netip.Prefix,
-) *Server {
-	t.Helper()
-
-	stateDir := t.TempDir()
-	cfg := &config.Config{
-		SigningKey:      testSigningKey,
-		StateDir:        stateDir,
-		DBURL:           "file:" + filepath.Join(stateDir, "state.sqlite3"),
-		BlockedNetworks: blockedNetworks,
-		// A fetch that gets past the checks and finds nothing at the address
-		// fails within this time at the latest.
-		UpstreamFetchTimeout: 2 * time.Second,
-		// With no connection slots, the fetch would fail before connecting.
-		UpstreamConnections: config.DefaultUpstreamConnections,
-		DownstreamTimeout:   config.DefaultDownstreamTimeout,
-	}
-
-	var (
-		h  *handlers.Handlers
-		mw *middleware.Middleware
-	)
-
-	app := fxtest.New(t,
-		fx.Supply(cfg),
-		fx.Provide(
-			globals.New,
-			logger.New,
-			database.New,
-			healthcheck.New,
-			handlers.New,
-			middleware.New,
-		),
-		fx.Populate(&h, &mw),
-	)
-	app.RequireStart()
-	t.Cleanup(app.RequireStop)
-
-	s := &Server{config: cfg, mw: mw, h: h}
-	s.SetupRoutes()
-
-	return s
-}
-
 // getImage sends a GET for target to s and fails unless it answers 200.
 func getImage(t *testing.T, s *Server, target string) *httptest.ResponseRecorder {
 	t.Helper()

internal/server/source_url_internal_test.go

@@ -3,7 +3,6 @@ package server
 import (
 	"net/http"
 	"net/http/httptest"
-	"net/netip"
 	"net/url"
 	"regexp"
 	"slices"
@@ -544,122 +543,3 @@ func encryptedImageURL(t *testing.T, sourceHost string) string {
 
 	return "/v1/e/" + token + "/img.png"
 }
-
-// TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address requests
-// ipv6SourcePath on IPv6 source hosts that hold a loopback or private IPv4
-// address in their last four bytes, in the IPv4-compatible form (::/96) or the
-// NAT64 form (64:ff9b::/96), through a /v1/image/ URL with a signature and
-// through an encrypted URL. Each answers 403, and the upstream receives no
-// request: the test's fetcher connects every address to the test upstream, so
-// only the fetcher's check of the source URL can refuse it.
-func TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address(t *testing.T) {
-	t.Parallel()
-
-	upstream := startRecordingUpstream(t)
-	s, _, _ := startImageProxy(t, upstream.Server)
-
-	sourceHosts := []string{
-		"[::127.0.0.1]",     // IPv4-compatible form of a loopback address
-		"[::10.0.0.1]",      // IPv4-compatible form of a private address
-		"[64:ff9b::7f00:1]", // NAT64 form of 127.0.0.1
-	}
-
-	for _, sourceHost := range sourceHosts {
-		imageURLs := []string{
-			signedImageURL(t, sourceHost),
-			encryptedImageURL(t, sourceHost),
-		}
-
-		for _, imageURL := range imageURLs {
-			rec := httptest.NewRecorder()
-			s.ServeHTTP(rec, httptest.NewRequestWithContext(
-				t.Context(), http.MethodGet, imageURL, nil))
-			t.Logf("GET %s (source host %s): %d", imageURL, sourceHost, rec.Code)
-
-			if rec.Code != http.StatusForbidden {
-				t.Errorf("source host %s: status = %d, want %d; body %s",
-					sourceHost, rec.Code, http.StatusForbidden, rec.Body.String())
-			}
-		}
-	}
-
-	if got := upstream.requestTargets(); len(got) != 0 {
-		t.Errorf("upstream received %q, want no request", got)
-	}
-}
-
-// TestImageRoutesCheckIPv4AddressInIPv6SourceHost requests ipv6SourcePath on
-// source hosts that hold an IPv4 address, through a /v1/image/ URL with a
-// signature and through an encrypted URL, with the fetcher pixad uses.
-// [64:ff9b:1::a00:1], in the local-use NAT64 range (64:ff9b:1::/48, RFC 8215),
-// answers 403. [::203.0.113.5] holds the public address 203.0.113.5 in the
-// IPv4-compatible form (::/96) and answers 403 when blocked_networks lists
-// 203.0.113.0/24 or ::/96. [::ffff:203.0.113.5] holds it in the IPv4-mapped
-// form (::ffff:0:0/96) and answers 403 when blocked_networks lists
-// 203.0.113.0/24. Go keeps the plain address 203.0.113.5 in the mapped form
-// too, and an IPv6 range must not refuse it: with ::/0 listed it is not
-// refused. Neither is [::203.0.113.5] with blocked_networks empty. Where a
-// host is not refused, the fetcher tries to connect to it, finds nothing
-// there, and the request fails with another status.
-func TestImageRoutesCheckIPv4AddressInIPv6SourceHost(t *testing.T) {
-	t.Parallel()
-
-	const (
-		ipv4CompatibleHost = "[::203.0.113.5]"
-		ipv4MappedHost     = "[::ffff:203.0.113.5]"
-	)
-
-	tests := []struct {
-		name            string
-		sourceHost      string
-		blockedNetworks []netip.Prefix
-		wantForbidden   bool
-	}{
-		{"local-use NAT64 form of 10.0.0.1", "[64:ff9b:1::a00:1]", nil, true},
-		{"IPv4-compatible form of an address in blocked_networks",
-			ipv4CompatibleHost,
-			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
-		{"IPv4-compatible form with ::/96 in blocked_networks",
-			ipv4CompatibleHost,
-			[]netip.Prefix{netip.MustParsePrefix("::/96")}, true},
-		{"IPv4-mapped form of an address in blocked_networks",
-			ipv4MappedHost,
-			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
-		{"plain IPv4 address with ::/0 in blocked_networks",
-			"203.0.113.5",
-			[]netip.Prefix{netip.MustParsePrefix("::/0")}, false},
-		{"IPv4-compatible form of an address with blocked_networks empty",
-			ipv4CompatibleHost, nil, false},
-	}
-
-	for _, tt := range tests {
-		imageURLs := map[string]string{
-			"image URL with a signature": signedImageURL(t, tt.sourceHost),
-			"encrypted URL":              encryptedImageURL(t, tt.sourceHost),
-		}
-
-		for route, imageURL := range imageURLs {
-			t.Run(tt.name+" "+route, func(t *testing.T) {
-				t.Parallel()
-
-				s := startImageProxyWithBlockedNetworks(t, tt.blockedNetworks)
-
-				rec := httptest.NewRecorder()
-				s.ServeHTTP(rec, httptest.NewRequestWithContext(
-					t.Context(), http.MethodGet, imageURL, nil))
-				t.Logf("GET %s: %d", imageURL, rec.Code)
-
-				forbidden := rec.Code == http.StatusForbidden
-				if tt.wantForbidden && !forbidden {
-					t.Errorf("status = %d, want %d; body %s",
-						rec.Code, http.StatusForbidden, rec.Body.String())
-				}
-
-				if !tt.wantForbidden && forbidden {
-					t.Errorf("status = %d, want any other status; body %s",
-						rec.Code, rec.Body.String())
-				}
-			})
-		}
-	}
-}