Say what a 0 side does in the ValidateDimension doc comment

It said 0 meant "original size"; the side is worked out from the
source's proportions, as README.md now says.

Model: opus-5-5

README.md

@@ -473,11 +473,9 @@ nor change what it asks for.
    `jxl` for a form with no format.
 
 The token holds the source's host, path and query and the size, format, quality,
-fit and expiry, encrypted with a key derived from `signing_key`. The host is
+fit and expiry, encrypted with a key derived from `signing_key`. The source
-kept in lower case and an empty path as `/`, as for `/v1/image/`, so
+URL's scheme is not kept: the image is fetched like any other (see Routes), and
-`https://CDN.Example.com` and `https://cdn.example.com/` are one source image,
+the blocked networks still apply.
-fetched and cached once. The source URL's scheme is not kept: the image is
-fetched like any other (see Routes), and the blocked networks still apply.
 
 How long the URL lasts is chosen on the page, from 1 minute to 1 year, or never.
 The expiry is fixed in the token when the URL is made and cannot be changed or
@@ -694,10 +692,7 @@ Key settings in more detail:
   and generator pages. Default: empty
 - `blocked_networks` — list of CIDR ranges to refuse for SSRF protection, added
   to the always-enforced built-in ranges (loopback, private, link-local, CGNAT,
-  benchmark, NAT64, and the like); an invalid CIDR aborts startup. An IPv6
+  benchmark, NAT64, and the like); an invalid CIDR aborts startup
-  address in the IPv4-mapped form (`::ffff:a.b.c.d`) is matched only as the IPv4
-  address it holds, so an IPv6 range such as `::/0` refuses neither it nor a
-  plain IPv4 address
 - `trusted_proxies` — list of CIDR ranges of the reverse proxies in front of
   pixa. `X-Forwarded-For` is believed only when the direct peer falls inside one
   of these ranges; the logged and login-recorded client address is then the
@@ -728,14 +723,11 @@ Key settings in more detail:
 - `signing_key` — HMAC secret for URL signatures
 - `db_url` — the SQLite database to open; omitted, it is
   `file:<state_dir>/state.sqlite3?_pragma=journal_mode(WAL)`, which keeps the
-  database in WAL mode. `state_dir` is percent-encoded in it, so a `%`, `?` or
+  database in WAL mode. pixa opens one connection to it, so its own reads and
-  `#` in the name is written as `%25`, `%3F` or `%23`. For a `state_dir` of `/`
+  writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to any
-  or one starting with `//` it starts `file:////`, so SQLite does not read the
+  `db_url`, so a write that finds another program writing to the file waits up
-  first name in the path as a host. pixa opens one connection to it, so its own
+  to five seconds for it instead of failing. WAL mode comes only from the URL:
-  reads and writes run one at a time. pixa adds `_pragma=busy_timeout(5000)` to
+  keep `_pragma=journal_mode(WAL)` in one you set
-  any `db_url`, so a write that finds another program writing to the file waits
-  up to five seconds for it instead of failing. WAL mode comes only from the
-  URL: keep `_pragma=journal_mode(WAL)` in one you set
 - `cache_max_bytes` — disk cache size limit in bytes; `0` disables the disk
   cache entirely; omitted defaults to 75% of the sum of the free space on the
   filesystem containing `<state_dir>/cache/` and the bytes of source and

TODO.md

@@ -30,40 +30,6 @@ P2: security: per-origin rate limiting
 
 # Completed Steps
 
-- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
-  addresses refuses the local-use NAT64 range (`64:ff9b:1::/48`, RFC 8215) as it
-  refuses `64:ff9b::/96`, and refuses an IPv6 address in the IPv4-compatible
-  form (`::/96`) when `blocked_networks` contains either the address as written
-  or the IPv4 address it holds (closes #299). A source host such as
-  `[64:ff9b:1::a00:1]` was fetched, which on a network that runs NAT64 on that
-  range reaches the IPv4 address it holds, here `10.0.0.1`; and with
-  `203.0.113.0/24` in `blocked_networks`, `[::ffff:203.0.113.5]` was refused but
-  `[::203.0.113.5]` was fetched. Both now answer 403. The mapped form
-  (`::ffff:a.b.c.d`) is still matched only as the IPv4 address it holds: Go
-  keeps a plain IPv4 address in that form, and an IPv6 entry such as `::/0` must
-  not refuse every IPv4 address.
-- 2026-10-16 P1 security bug: the check that keeps pixa from fetching internal
-  addresses judges an IPv6 address in the IPv4-compatible form (`::/96`), such
-  as `::127.0.0.1` or `::10.0.0.1`, by the IPv4 address in its last four bytes
-  (closes #297). It read only the mapped form (`::ffff:a.b.c.d`) as IPv4, so a
-  source host such as `[::127.0.0.1]` was checked as a public IPv6 address and
-  fetched, which on a network that routes it reaches the internal IPv4 host; it
-  is now refused with 403. The NAT64 form (`64:ff9b::/96`) was already refused
-  as a whole, as one of the built-in blocked ranges, and still is.
-- 2026-10-16 a source host that is an IPv6 address in brackets with no port,
-  such as `[2001:db8::a]`, is fetched like one with a port, through `/v1/image/`
-  and through an encrypted URL (closes #295). The fetcher's check of the source
-  URL kept the brackets when no port followed them, could not look the host up,
-  and the request answered 500. It now checks the address without brackets, so a
-  private one is refused with 403, as with a port.
-- 2026-10-16 a `state_dir` whose name holds `%`, `?` or `#` keeps its database
-  at `state.sqlite3` in that directory (closes #290): the `db_url` derived from
-  it put the name into a `file:` URL as it was, so SQLite read `%41` as `A`, a
-  `?` or `#` ended the path early, and the journal mode parameter was lost. The
-  derived `db_url` is now built with Go's `net/url`, which writes those
-  characters as `%25`, `%3F` and `%23`. For a `state_dir` of `/` or one starting
-  with `//` it starts `file:////`, so SQLite no longer reads the first name in
-  the path as a host.
 - 2026-10-16 a size with one side `0` keeps the side computed from the source's
   proportions at 1 or more (closes #283): it was rounded down, so for a thin
   source it came out at 0, and libvips then made the size square. An 8192x1
@@ -78,11 +44,6 @@ P2: security: per-origin rate limiting
   the image is scaled to cover the size, so that source at `100x0` comes out at
   8192x1. `README.md` now says this under Signature Specification, and says how
   a `0` side is worked out where it said `0` meant the original.
-- 2026-10-16 the generator page lower-cases the source host and writes an empty
-  source path as `/` before it makes the encrypted URL, as `/v1/image/` does
-  (closes #293). A host written in upper and in lower case, or a source URL with
-  no path and with the path `/`, made two cache keys and two upstream requests
-  for one image.
 - 2026-10-16 the source URL a request fetches is built with `net/url` from the
   source host, path and query, not joined as text (closes #288). The source
   path, decoded, is fetched percent-encoded again, so `100%25.png` fetches

internal/config/config.go

@@ -338,7 +338,8 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 				settingName(keyDBURL), errValueEmpty)
 		}
 
-		c.DBURL = defaultDBURL(c.StateDir)
+		// The driver sets the journal mode only through a _pragma parameter.
+		c.DBURL = fmt.Sprintf("file:%s/state.sqlite3?_pragma=journal_mode(WAL)", c.StateDir)
 	}
 
 	if loader.err != nil {
@@ -353,30 +354,6 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 	return c, nil
 }
 
-// defaultDBURL returns the db_url used when db_url is omitted: the file
-// state.sqlite3 in stateDir, in WAL mode, which the driver sets only
-// through a _pragma parameter. String() percent-encodes any %, ? or # in
-// the directory name, which SQLite decodes back, so the URL names exactly
-// this file. OmitHost writes file:/var/lib/pixa/... instead of
-// file:///var/lib/pixa/..., and keeps a relative stateDir from being read
-// as a host name. The path written into the URL is stateDir followed by
-// /state.sqlite3; when it starts with //, as it does for a stateDir of /
-// or one starting with //, the empty host is kept, so the URL starts
-// file://// and SQLite does not read the first name in the path as a
-// host.
-func defaultDBURL(stateDir string) string {
-	dbPath := stateDir + "/state.sqlite3"
-
-	dbURL := url.URL{
-		Scheme:   "file",
-		OmitHost: !strings.HasPrefix(dbPath, "//"),
-		Path:     dbPath,
-		RawQuery: "_pragma=journal_mode(WAL)",
-	}
-
-	return dbURL.String()
-}
-
 // validateKnownKeys rejects configuration files containing keys the
 // application does not understand, so typos fail at startup instead of
 // being silently ignored, and rejects keys that are explicitly set to

internal/config/config_validation_internal_test.go

@@ -135,104 +135,6 @@ func TestDefaultDBURLOpensTheDatabaseInWALMode(t *testing.T) {
 	}
 }
 
-// TestDerivedDBURLOpensStateDirHoldingURLCharacters opens the db_url
-// derived from a state_dir whose name holds %41, ? and #, and checks that
-// the database is state.sqlite3 in that directory, in WAL mode. Put into
-// a file: URL as it is, the name would lose its meaning: %41 is read as
-// A, and the path ends at the ?, which also loses the journal mode.
-func TestDerivedDBURLOpensStateDirHoldingURLCharacters(t *testing.T) {
-	t.Parallel()
-
-	stateDir := filepath.Join(t.TempDir(), "a%41b?c#d")
-
-	err := os.Mkdir(stateDir, 0o750)
-	if err != nil {
-		t.Fatalf("failed to create %q: %v", stateDir, err)
-	}
-
-	// Quoted so YAML takes the whole name as it is.
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: '"+stateDir+"'\n")
-	if err != nil {
-		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
-	}
-
-	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
-
-	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(stateDir, "state.sqlite3"))
-}
-
-// TestDerivedDBURLOpensStateDirStartingWithTwoSlashes opens the db_url
-// derived from a state_dir that starts with //, and checks that the
-// database is state.sqlite3 in that directory, in WAL mode. Written right
-// after file:, such a name gives a URL starting file://, and SQLite reads
-// the first directory name as a host and refuses to open it.
-func TestDerivedDBURLOpensStateDirStartingWithTwoSlashes(t *testing.T) {
-	t.Parallel()
-
-	dir := t.TempDir()
-	stateDir := "/" + dir
-
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: "+stateDir+"\n")
-	if err != nil {
-		t.Fatalf("config with state_dir %q should be valid, got: %v", stateDir, err)
-	}
-
-	t.Logf("state_dir %q gives db_url %q", stateDir, c.DBURL)
-
-	checkDBURLOpensFileInWALMode(t, c.DBURL, filepath.Join(dir, "state.sqlite3"))
-}
-
-// TestDerivedDBURLForRootStateDir checks the db_url derived from a
-// state_dir of /. The path written into the URL is then
-// //state.sqlite3, and written right after file: it gives a URL starting
-// file://, where SQLite reads state.sqlite3 as a host and refuses to open
-// it. The test only checks the URL, since it cannot write to /.
-func TestDerivedDBURLForRootStateDir(t *testing.T) {
-	t.Parallel()
-
-	c, err := configFromYAML(t, signingKeyLine+"state_dir: /\n")
-	if err != nil {
-		t.Fatalf("config with state_dir / should be valid, got: %v", err)
-	}
-
-	t.Logf("state_dir / gives db_url %q", c.DBURL)
-
-	wantDBURL := "file:////state.sqlite3?_pragma=journal_mode(WAL)"
-	if c.DBURL != wantDBURL {
-		t.Errorf("DBURL = %q, want %q", c.DBURL, wantDBURL)
-	}
-}
-
-// checkDBURLOpensFileInWALMode opens dbURL with the SQLite driver pixad
-// uses, and checks that the database is in WAL mode and is the file
-// dbFile.
-func checkDBURLOpensFileInWALMode(t *testing.T, dbURL, dbFile string) {
-	t.Helper()
-
-	db, err := sql.Open("sqlite", dbURL)
-	if err != nil {
-		t.Fatalf("failed to open %q: %v", dbURL, err)
-	}
-
-	t.Cleanup(func() { _ = db.Close() })
-
-	var journalMode string
-
-	err = db.QueryRowContext(t.Context(), "PRAGMA journal_mode").Scan(&journalMode)
-	if err != nil {
-		t.Fatalf("failed to read the journal mode of %q: %v", dbURL, err)
-	}
-
-	if journalMode != "wal" {
-		t.Errorf("journal mode of %q = %q, want wal", dbURL, journalMode)
-	}
-
-	_, err = os.Stat(dbFile)
-	if err != nil {
-		t.Errorf("opening %q did not create %q: %v", dbURL, dbFile, err)
-	}
-}
-
 func TestExplicitValidValuesAreUsed(t *testing.T) {
 	t.Parallel()
 

internal/handlers/auth.go

@@ -127,7 +127,7 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 		sourceURL := r.FormValue("url")
 
 		// Validate source URL
-		parsed, err := parseSourceURL(sourceURL)
+		parsed, err := url.Parse(sourceURL)
 		if err != nil || parsed.Host == "" {
 			s.renderGeneratorWithForm(w, r, "Invalid source URL", r.Form,
 				http.StatusBadRequest)
@@ -198,25 +198,6 @@ func (s *Handlers) HandleGenerateURL() http.HandlerFunc {
 	}
 }
 
-// parseSourceURL parses the source URL entered on the generator page with its
-// host lower-cased and an empty path written as "/", as /v1/image/ reads a
-// source URL, so that each spelling of one source URL makes one cache key and
-// one upstream request.
-func parseSourceURL(sourceURL string) (*url.URL, error) {
-	parsed, err := url.Parse(sourceURL)
-	if err != nil {
-		return nil, err
-	}
-
-	parsed.Host = strings.ToLower(parsed.Host)
-
-	if parsed.Path == "" {
-		parsed.Path = "/"
-	}
-
-	return parsed, nil
-}
-
 // fetchedAsWritten reports whether fetchURL, the URL pixa fetches for an
 // image URL made from the source URL source, is source as it was written,
 // apart from the scheme, which the token does not keep. It is not when source

internal/httpfetcher/httpfetcher.go

@@ -59,9 +59,8 @@ const (
 // builtinBlockedPrefixes are internal or special-use ranges that Go's
 // net.IP predicates (IsPrivate, IsLinkLocalUnicast, and the like) do not
 // already cover. They are always blocked, in addition to any
-// operator-supplied networks. IPv4-mapped and IPv4-compatible IPv6
+// operator-supplied networks. IPv4-mapped IPv6 addresses are unmapped
-// addresses are read as the IPv4 address they hold before matching, so
+// before matching, so these IPv4 ranges are caught in both forms.
-// these IPv4 ranges are caught in all three forms.
 //
 //nolint:gochecknoglobals // immutable built-in blocklist
 var builtinBlockedPrefixes = []netip.Prefix{
@@ -69,7 +68,6 @@ var builtinBlockedPrefixes = []netip.Prefix{
 	netip.MustParsePrefix("192.0.0.0/24"),  // RFC 6890 IETF protocol assignments
 	netip.MustParsePrefix("198.18.0.0/15"), // RFC 2544 benchmarking range
 	netip.MustParsePrefix("64:ff9b::/96"),  // RFC 6052 NAT64 (maps onto IPv4)
-	netip.MustParsePrefix("64:ff9b:1::/48"), // RFC 8215 local-use NAT64 (maps onto IPv4)
 }
 
 // Fetcher errors.
@@ -475,18 +473,18 @@ func validateURL(ctx context.Context, rawURL string, allowHTTP bool) error {
 		return ErrUnsupportedScheme
 	}
 
-	parsedURL, err := neturl.Parse(rawURL)
+	// Parse to extract host
-	if err != nil {
+	host := extractHost(rawURL)
-		return fmt.Errorf("%w: %w", ErrInvalidHost, err)
-	}
-
-	// Hostname drops any port, and the brackets of an IPv6 address whether
-	// or not a port follows them
-	host := parsedURL.Hostname()
 	if host == "" {
 		return ErrInvalidHost
 	}
 
+	// Remove port if present
+	h, _, err := net.SplitHostPort(host)
+	if err == nil {
+		host = h
+	}
+
 	// Block obvious localhost patterns
 	if isLocalhost(host) {
 		return ErrSSRFBlocked
@@ -545,9 +543,6 @@ func isPrivateIP(ip net.IP) bool {
 		return true
 	}
 
-	// An IPv4-compatible IPv6 address is judged as the IPv4 address it holds
-	ip = ipv4CompatibleToIPv4(ip)
-
 	// Check for loopback
 	if ip.IsLoopback() {
 		return true
@@ -599,12 +594,7 @@ func isPrivateIP(ip net.IP) bool {
 }
 
 // isBlockedIP reports whether ip is refused, either by the built-in
-// internal-range check or by one of the operator-supplied prefixes. An
+// internal-range check or by one of the operator-supplied prefixes.
-// IPv4-compatible address (in ::/96) is refused when a prefix contains the
-// address as written or the IPv4 address it holds. An IPv4-mapped address (in
-// ::ffff:0:0/96) is matched only as the IPv4 address it holds: Go keeps a
-// plain IPv4 address in that form too, and an IPv6 prefix such as ::/0 must
-// not refuse every IPv4 address.
 func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 	if isPrivateIP(ip) {
 		return true
@@ -617,28 +607,11 @@ func isBlockedIP(ip net.IP, blocked []netip.Prefix) bool {
 
 	addr = addr.Unmap()
 
-	// ip read as IPv4 where it is or holds an IPv4 address, otherwise the
-	// zero netip.Addr, which no prefix contains. Matching asIPv4 as well as
-	// addr refuses more only for an IPv4-compatible address.
-	asIPv4, _ := netip.AddrFromSlice(ipv4CompatibleToIPv4(ip).To4())
-
 	return slices.ContainsFunc(blocked, func(prefix netip.Prefix) bool {
-		return prefix.Contains(addr) || prefix.Contains(asIPv4)
+		return prefix.Contains(addr)
 	})
 }
 
-// ipv4CompatibleToIPv4 returns the IPv4 address that an IPv4-compatible IPv6
-// address (in ::/96, such as ::127.0.0.1) holds in its last four bytes, and
-// any other address unchanged.
-func ipv4CompatibleToIPv4(ip net.IP) net.IP {
-	addr, ok := netip.AddrFromSlice(ip)
-	if ok && netip.MustParsePrefix("::/96").Contains(addr) {
-		return ip[12:]
-	}
-
-	return ip
-}
-
 // ssrfSafeDialer validates IP addresses against the built-in blocked ranges
 // before connecting. New wraps dialSSRFSafe with the operator-supplied
 // blocklist; this entry point enforces the built-in ranges alone.

internal/httpfetcher/httpfetcher_internal_test.go

@@ -186,44 +186,6 @@ func TestIsPrivateIP(t *testing.T) {
 	}
 }
 
-// TestIsPrivateIPJudgesEmbeddedIPv4Address checks IPv6 addresses that hold an
-// IPv4 address in their last four bytes: the IPv4-compatible form (::/96) and
-// the NAT64 form (64:ff9b::/96). One holding a loopback, private or
-// link-local IPv4 address is refused as that address is, and one holding a
-// public IPv4 address in the IPv4-compatible form passes.
-func TestIsPrivateIPJudgesEmbeddedIPv4Address(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		ip   string
-		want bool
-	}{
-		{"::127.0.0.1", true},       // loopback
-		{"::10.0.0.1", true},        // private
-		{"::169.254.169.254", true}, // link-local
-		{"64:ff9b::7f00:1", true},   // NAT64 form of 127.0.0.1
-		{"::8.8.8.8", false},        // public
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.ip, func(t *testing.T) {
-			t.Parallel()
-
-			ip := net.ParseIP(tc.ip)
-			if ip == nil {
-				t.Fatalf("failed to parse IP %q", tc.ip)
-			}
-
-			got := isPrivateIP(ip)
-			t.Logf("isPrivateIP(%s) = %v", ip, got)
-
-			if got != tc.want {
-				t.Errorf("isPrivateIP(%q) = %v, want %v", tc.ip, got, tc.want)
-			}
-		})
-	}
-}
-
 func TestValidateURL_RejectsNonHTTPS(t *testing.T) {
 	t.Parallel()
 

internal/server/image_proxy_internal_test.go

@@ -14,12 +14,10 @@ import (
 	"net"
 	"net/http"
 	"net/http/httptest"
-	"net/netip"
 	"os"
 	"path/filepath"
 	"sync/atomic"
 	"testing"
-	"time"
 
 	"go.uber.org/fx"
 	"go.uber.org/fx/fxtest"
@@ -185,57 +183,6 @@ func startImageProxy(
 	return s, db.DB(), stateDir
 }
 
-// startImageProxyWithBlockedNetworks starts the components pixad's fx app
-// builds, from a config with a fresh state directory and blockedNetworks as
-// blocked_networks. Unlike startImageProxy it provides no upstream fetcher, so
-// the handlers build the one pixad uses, which checks every address it
-// connects to against the built-in blocked ranges and blocked_networks. It
-// returns the server with its routes.
-func startImageProxyWithBlockedNetworks(
-	t *testing.T, blockedNetworks []netip.Prefix,
-) *Server {
-	t.Helper()
-
-	stateDir := t.TempDir()
-	cfg := &config.Config{
-		SigningKey:      testSigningKey,
-		StateDir:        stateDir,
-		DBURL:           "file:" + filepath.Join(stateDir, "state.sqlite3"),
-		BlockedNetworks: blockedNetworks,
-		// A fetch that gets past the checks and finds nothing at the address
-		// fails within this time at the latest.
-		UpstreamFetchTimeout: 2 * time.Second,
-		// With no connection slots, the fetch would fail before connecting.
-		UpstreamConnections: config.DefaultUpstreamConnections,
-		DownstreamTimeout:   config.DefaultDownstreamTimeout,
-	}
-
-	var (
-		h  *handlers.Handlers
-		mw *middleware.Middleware
-	)
-
-	app := fxtest.New(t,
-		fx.Supply(cfg),
-		fx.Provide(
-			globals.New,
-			logger.New,
-			database.New,
-			healthcheck.New,
-			handlers.New,
-			middleware.New,
-		),
-		fx.Populate(&h, &mw),
-	)
-	app.RequireStart()
-	t.Cleanup(app.RequireStop)
-
-	s := &Server{config: cfg, mw: mw, h: h}
-	s.SetupRoutes()
-
-	return s
-}
-
 // getImage sends a GET for target to s and fails unless it answers 200.
 func getImage(t *testing.T, s *Server, target string) *httptest.ResponseRecorder {
 	t.Helper()

internal/server/source_url_internal_test.go

@@ -3,20 +3,15 @@ package server
 import (
 	"net/http"
 	"net/http/httptest"
-	"net/netip"
 	"net/url"
 	"regexp"
 	"slices"
-	"strconv"
 	"strings"
 	"sync"
 	"testing"
-	"time"
 
-	"sneak.berlin/go/pixa/internal/encurl"
 	"sneak.berlin/go/pixa/internal/imgcache"
 	"sneak.berlin/go/pixa/internal/session"
-	"sneak.berlin/go/pixa/internal/signature"
 )
 
 // percentSignPath is a source path holding a "%", which a URL writes %25.
@@ -313,70 +308,6 @@ func TestGeneratedURLFetchesTheSourceURLAsEntered(t *testing.T) {
 	}
 }
 
-// TestGeneratorMakesOneImageURLForTwoSpellingsOfASourceURL enters two
-// spellings of one source URL on the generator page, requests the encrypted
-// URL made for each, and checks that the upstream receives one request and
-// that the second encrypted URL is served from the cache. One pair writes the
-// host in upper and in lower case, which /v1/image/ lower-cases. The host is
-// an IPv6 address, whose hex digits have letter case, because the fetcher
-// would look a host name up in DNS. It has a port, as the fetcher refuses an
-// IPv6 address written without one. The other pair is a source URL with no
-// path and with the path "/", both of which fetch "/".
-func TestGeneratorMakesOneImageURLForTwoSpellingsOfASourceURL(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name string
-		// sourceURLs are the two spellings, after "https://"
-		sourceURLs []string
-		// wantRequest is the path the upstream must receive
-		wantRequest string
-	}{
-		{"host in upper and in lower case",
-			[]string{"[2001:DB8::A]:8443/a.png", "[2001:db8::a]:8443/a.png"},
-			"/a.png"},
-		{"no path and the path written as a slash",
-			[]string{upstreamHost, upstreamHost + "/"}, "/"},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			upstream := startRecordingUpstream(t)
-			s, _, _ := startImageProxy(t, upstream.Server)
-
-			var imageURLs []string
-
-			for _, sourceURL := range tt.sourceURLs {
-				rec := postGenerate(t, s, "https://"+sourceURL)
-
-				match := generatedURLPattern.FindStringSubmatch(rec.Body.String())
-				if rec.Code != http.StatusOK || match == nil {
-					t.Fatalf("POST /generate: %d with no encrypted URL; body %s",
-						rec.Code, rec.Body.String())
-				}
-
-				imageURLs = append(imageURLs, match[1])
-			}
-
-			getImage(t, s, imageURLs[0])
-
-			second := getImage(t, s, imageURLs[1])
-			if got := second.Header().Get("X-Pixa-Cache"); got != string(imgcache.CacheHit) {
-				t.Errorf("second X-Pixa-Cache = %q, want HIT", got)
-			}
-
-			got := upstream.requestTargets()
-			t.Logf("upstream received %q", got)
-
-			if !slices.Equal(got, []string{tt.wantRequest}) {
-				t.Errorf("upstream received %q, want [%q]", got, tt.wantRequest)
-			}
-		})
-	}
-}
-
 // TestGeneratorRefusesSourceURLItCannotFetchAsWritten submits source URLs the
 // generator page must make no encrypted URL for, and checks that it answers
 // 400 and shows why. pixa keeps the source path decoded and fetches it
@@ -438,228 +369,3 @@ func TestGeneratorRefusesSourceURLItCannotFetchAsWritten(t *testing.T) {
 		})
 	}
 }
-
-// ipv6SourcePath is the source path of the image URLs signedImageURL and
-// encryptedImageURL make.
-const ipv6SourcePath = "/ipv6.png"
-
-// TestImageRoutesFetchIPv6SourceHostWithOrWithoutPort requests ipv6SourcePath
-// on an IPv6 source host, written with and without a port, through a
-// /v1/image/ URL with a signature and through an encrypted URL. The public
-// address 2001:db8::a, a documentation address (RFC 3849) the fetcher accepts
-// as public, answers 200, and the upstream receives the request for
-// ipv6SourcePath. The private address fd00::1 answers 403, and the upstream
-// receives no request: the test's fetcher connects every address to the test
-// upstream, so only the fetcher's check of the source URL can refuse it.
-func TestImageRoutesFetchIPv6SourceHostWithOrWithoutPort(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name       string
-		sourceHost string
-		wantStatus int
-		// wantRequests are the request targets the upstream must receive
-		wantRequests []string
-	}{
-		{"public address without a port", "[2001:db8::a]",
-			http.StatusOK, []string{ipv6SourcePath}},
-		{"public address with a port", "[2001:db8::a]:8443",
-			http.StatusOK, []string{ipv6SourcePath}},
-		{"private address without a port", "[fd00::1]",
-			http.StatusForbidden, nil},
-		{"private address with a port", "[fd00::1]:8443",
-			http.StatusForbidden, nil},
-	}
-
-	for _, tt := range tests {
-		imageURLs := map[string]string{
-			"image URL with a signature": signedImageURL(t, tt.sourceHost),
-			"encrypted URL":              encryptedImageURL(t, tt.sourceHost),
-		}
-
-		for route, imageURL := range imageURLs {
-			t.Run(tt.name+" "+route, func(t *testing.T) {
-				t.Parallel()
-
-				upstream := startRecordingUpstream(t)
-				s, _, _ := startImageProxy(t, upstream.Server)
-
-				rec := httptest.NewRecorder()
-				s.ServeHTTP(rec, httptest.NewRequestWithContext(
-					t.Context(), http.MethodGet, imageURL, nil))
-				t.Logf("GET %s: %d", imageURL, rec.Code)
-
-				if rec.Code != tt.wantStatus {
-					t.Errorf("status = %d, want %d; body %s",
-						rec.Code, tt.wantStatus, rec.Body.String())
-				}
-
-				got := upstream.requestTargets()
-				t.Logf("upstream received %q", got)
-
-				if !slices.Equal(got, tt.wantRequests) {
-					t.Errorf("upstream received %q, want %q", got, tt.wantRequests)
-				}
-			})
-		}
-	}
-}
-
-// signedImageURL returns the /v1/image/ URL of ipv6SourcePath on sourceHost at
-// its original size as PNG, with a signature made with the test signing key,
-// which a host not on the allowlist needs. The URL has no q or fit, so it is
-// signed with the quality 85 and the fit cover.
-func signedImageURL(t *testing.T, sourceHost string) string {
-	t.Helper()
-
-	path, sig, exp := signature.New(testSigningKey).GenerateSignedURL(
-		&signature.Request{
-			SourceHost: sourceHost,
-			SourcePath: ipv6SourcePath,
-			Format:     string(imgcache.FormatPNG),
-			Quality:    85,
-			FitMode:    string(imgcache.FitCover),
-		}, time.Hour)
-
-	return path + "?sig=" + sig + "&exp=" + strconv.FormatInt(exp, 10)
-}
-
-// encryptedImageURL returns the encrypted URL of ipv6SourcePath on sourceHost
-// at its original size as PNG, made with the test signing key.
-func encryptedImageURL(t *testing.T, sourceHost string) string {
-	t.Helper()
-
-	generator, err := encurl.NewGenerator(testSigningKey)
-	if err != nil {
-		t.Fatalf("encurl.NewGenerator: %v", err)
-	}
-
-	token, err := generator.Generate(&encurl.Payload{
-		SourceHost: sourceHost, SourcePath: ipv6SourcePath,
-		Format: imgcache.FormatPNG,
-	})
-	if err != nil {
-		t.Fatalf("encurl Generate: %v", err)
-	}
-
-	return "/v1/e/" + token + "/img.png"
-}
-
-// TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address requests
-// ipv6SourcePath on IPv6 source hosts that hold a loopback or private IPv4
-// address in their last four bytes, in the IPv4-compatible form (::/96) or the
-// NAT64 form (64:ff9b::/96), through a /v1/image/ URL with a signature and
-// through an encrypted URL. Each answers 403, and the upstream receives no
-// request: the test's fetcher connects every address to the test upstream, so
-// only the fetcher's check of the source URL can refuse it.
-func TestImageRoutesRefuseIPv6SourceHostHoldingInternalIPv4Address(t *testing.T) {
-	t.Parallel()
-
-	upstream := startRecordingUpstream(t)
-	s, _, _ := startImageProxy(t, upstream.Server)
-
-	sourceHosts := []string{
-		"[::127.0.0.1]",     // IPv4-compatible form of a loopback address
-		"[::10.0.0.1]",      // IPv4-compatible form of a private address
-		"[64:ff9b::7f00:1]", // NAT64 form of 127.0.0.1
-	}
-
-	for _, sourceHost := range sourceHosts {
-		imageURLs := []string{
-			signedImageURL(t, sourceHost),
-			encryptedImageURL(t, sourceHost),
-		}
-
-		for _, imageURL := range imageURLs {
-			rec := httptest.NewRecorder()
-			s.ServeHTTP(rec, httptest.NewRequestWithContext(
-				t.Context(), http.MethodGet, imageURL, nil))
-			t.Logf("GET %s (source host %s): %d", imageURL, sourceHost, rec.Code)
-
-			if rec.Code != http.StatusForbidden {
-				t.Errorf("source host %s: status = %d, want %d; body %s",
-					sourceHost, rec.Code, http.StatusForbidden, rec.Body.String())
-			}
-		}
-	}
-
-	if got := upstream.requestTargets(); len(got) != 0 {
-		t.Errorf("upstream received %q, want no request", got)
-	}
-}
-
-// TestImageRoutesCheckIPv4AddressInIPv6SourceHost requests ipv6SourcePath on
-// source hosts that hold an IPv4 address, through a /v1/image/ URL with a
-// signature and through an encrypted URL, with the fetcher pixad uses.
-// [64:ff9b:1::a00:1], in the local-use NAT64 range (64:ff9b:1::/48, RFC 8215),
-// answers 403. [::203.0.113.5] holds the public address 203.0.113.5 in the
-// IPv4-compatible form (::/96) and answers 403 when blocked_networks lists
-// 203.0.113.0/24 or ::/96. [::ffff:203.0.113.5] holds it in the IPv4-mapped
-// form (::ffff:0:0/96) and answers 403 when blocked_networks lists
-// 203.0.113.0/24. Go keeps the plain address 203.0.113.5 in the mapped form
-// too, and an IPv6 range must not refuse it: with ::/0 listed it is not
-// refused. Neither is [::203.0.113.5] with blocked_networks empty. Where a
-// host is not refused, the fetcher tries to connect to it, finds nothing
-// there, and the request fails with another status.
-func TestImageRoutesCheckIPv4AddressInIPv6SourceHost(t *testing.T) {
-	t.Parallel()
-
-	const (
-		ipv4CompatibleHost = "[::203.0.113.5]"
-		ipv4MappedHost     = "[::ffff:203.0.113.5]"
-	)
-
-	tests := []struct {
-		name            string
-		sourceHost      string
-		blockedNetworks []netip.Prefix
-		wantForbidden   bool
-	}{
-		{"local-use NAT64 form of 10.0.0.1", "[64:ff9b:1::a00:1]", nil, true},
-		{"IPv4-compatible form of an address in blocked_networks",
-			ipv4CompatibleHost,
-			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
-		{"IPv4-compatible form with ::/96 in blocked_networks",
-			ipv4CompatibleHost,
-			[]netip.Prefix{netip.MustParsePrefix("::/96")}, true},
-		{"IPv4-mapped form of an address in blocked_networks",
-			ipv4MappedHost,
-			[]netip.Prefix{netip.MustParsePrefix("203.0.113.0/24")}, true},
-		{"plain IPv4 address with ::/0 in blocked_networks",
-			"203.0.113.5",
-			[]netip.Prefix{netip.MustParsePrefix("::/0")}, false},
-		{"IPv4-compatible form of an address with blocked_networks empty",
-			ipv4CompatibleHost, nil, false},
-	}
-
-	for _, tt := range tests {
-		imageURLs := map[string]string{
-			"image URL with a signature": signedImageURL(t, tt.sourceHost),
-			"encrypted URL":              encryptedImageURL(t, tt.sourceHost),
-		}
-
-		for route, imageURL := range imageURLs {
-			t.Run(tt.name+" "+route, func(t *testing.T) {
-				t.Parallel()
-
-				s := startImageProxyWithBlockedNetworks(t, tt.blockedNetworks)
-
-				rec := httptest.NewRecorder()
-				s.ServeHTTP(rec, httptest.NewRequestWithContext(
-					t.Context(), http.MethodGet, imageURL, nil))
-				t.Logf("GET %s: %d", imageURL, rec.Code)
-
-				forbidden := rec.Code == http.StatusForbidden
-				if tt.wantForbidden && !forbidden {
-					t.Errorf("status = %d, want %d; body %s",
-						rec.Code, http.StatusForbidden, rec.Body.String())
-				}
-
-				if !tt.wantForbidden && forbidden {
-					t.Errorf("status = %d, want any other status; body %s",
-						rec.Code, rec.Body.String())
-				}
-			})
-		}
-	}
-}