Keep this issue's TODO.md entry at the top of Completed Steps

The rebase onto next put the newer entry above it.

Model: opus-5-5

README.md

@@ -131,6 +131,34 @@ What the [upaas](https://git.eeqj.de/sneak/upaas) app for pixa needs:
       the cache can grow to three quarters or more of the space they all have
       left, and to all of it when that is 500 MiB or less.
     - the rest are in the table under Configuration below
+- **Memory:** pixa can use up to `max_concurrent_processing` times 4.2 GiB for
+  the images it processes at once, plus `upstream_connections` times
+  `upstream_max_response_size` for the source images it has fetched that wait
+  for processing. 4.2 GiB is the most resident memory was measured to grow while
+  pixa, with pixad's libvips settings, processed one 8192x8192 source, the
+  largest it accepts, saving it at full size to each output format in turn, one
+  at a time. The sources were a JPEG, a GIF, a WebP, an 8-bit and a 16-bit PNG,
+  an 8-bit and a 12-bit AVIF, and an 8-bit, a 16-bit and a 32-bit floating-point
+  JPEG XL; memory grew most for the 16-bit JPEG XL, of random pixels, saved as
+  WebP. At the defaults that is half the CPUs pixa sees times 4.2 GiB, plus 64
+  times 50 MiB: on a host where pixa sees 48 CPUs, 24 times 4.2 GiB plus 3.1
+  GiB, about 104 GiB. Set `PIXA_MAX_CONCURRENT_PROCESSING` and
+  `PIXA_UPSTREAM_CONNECTIONS` so that this fits the memory the container may
+  use.
+- **Temporary files:** while pixa processes a large source, libvips writes its
+  decoded pixels to a file in `/tmp`. The file disappears from `/tmp` once it is
+  written, so a listing of `/tmp` does not show it, but it keeps its space, on
+  disk or, where `/tmp` is a tmpfs, in memory, until the image is done. For a
+  GIF, WebP, AVIF or JPEG XL source the decoded pixels are held in memory as
+  well as written to that file, and the 4.2 GiB above includes that memory. For
+  an 8192x8192 source the file was measured on pixad at 192 MiB for an 8-bit RGB
+  JPEG, 512 MiB for a 16-bit RGBA PNG or JPEG XL, and 1 GiB for a JPEG XL of
+  32-bit floating-point RGBA, the largest measured: up to 1 GiB per image
+  processed at once, 24 GiB at the defaults on a host where pixa sees 48 CPUs.
+  This `/tmp` is in the container's own filesystem, not on the volume at
+  `/var/lib/pixa`, and `cache_max_bytes` does not count it. The 4.2 GiB above
+  does not include these files; where `/tmp` is a tmpfs, they are memory on top
+  of it.
 - **Health check:** the image's `HEALTHCHECK` requests
   `/.well-known/healthcheck.json`. upaas reads the container's health 60 seconds
   after a deploy and marks the deploy failed unless it is `healthy`. The probe
@@ -566,7 +594,7 @@ tell. With no file, pixa uses the environment and the defaults.
 | `PIXA_ALLOW_HTTP`                    | `allow_http`                    | Allow plain-HTTP upstreams, for testing only; default `false`                |
 | `PIXA_UPSTREAM_CONNECTIONS_PER_HOST` | `upstream_connections_per_host` | Concurrent connections per upstream host; default `20`                       |
 | `PIXA_UPSTREAM_CONNECTIONS`          | `upstream_connections`          | Concurrent connections to all upstream hosts together; default `64`          |
-| `PIXA_MAX_CONCURRENT_PROCESSING`     | `max_concurrent_processing`     | Images processed at once; default the number of CPUs                         |
+| `PIXA_MAX_CONCURRENT_PROCESSING`     | `max_concurrent_processing`     | Images processed at once; default half the CPUs, at least 1                  |
 | `PIXA_IMAGE_REQUESTS_PER_MINUTE`     | `image_requests_per_minute`     | Image requests per client per minute; `0` turns it off; default `600`        |
 | `PIXA_UPSTREAM_FETCH_TIMEOUT`        | `upstream_fetch_timeout`        | Time allowed for one fetch from an upstream host; default `30s`              |
 | `PIXA_UPSTREAM_MAX_RESPONSE_SIZE`    | `upstream_max_response_size`    | Largest upstream response accepted, in bytes; default 50 MiB                 |
@@ -652,10 +680,12 @@ Key settings in more detail:
   does, and `downstream_timeout` has not ended first, the request is answered
   503 with the error `server busy, try again later`
 - `max_concurrent_processing` — the most images decoded and encoded at once;
-  default the number of CPUs pixa can use (`GOMAXPROCS`), which follows a
+  default half the CPUs pixa can use (`GOMAXPROCS`, which follows a container's
-  container's CPU limit. A request that finds all of them in use waits up to 10
+  CPU limit), rounded down, and at least 1. A value that is not a whole number
-  seconds for one to free up; if none does, and `downstream_timeout` has not
+  of at least 1 aborts startup. A request that finds all of them in use waits up
-  ended first, it is answered 503 the same way
+  to 10 seconds for one to free up; if none does, and `downstream_timeout` has
+  not ended first, it is answered 503 the same way. Each one can take a lot of
+  memory: see "Running under upaas"
 - `image_requests_per_minute` — how many requests one client may send to the
   image routes per minute (see the limit on them under Routes); default `600`.
   `0` turns the limit off, and a negative or non-integer value aborts startup.

TODO.md

@@ -30,6 +30,18 @@ P2: security: per-origin rate limiting
 
 # Completed Steps
 
+- 2026-10-15 `max_concurrent_processing` defaults to half the CPUs pixa sees,
+  rounded down, and at least 1 (closes #242): it defaulted to one image per CPU,
+  and a container with no CPU limit sees every CPU of the host, so on a 48-CPU
+  host pixa processed 48 images at once, each of which can take about 4.2 GiB.
+  `config.DefaultMaxConcurrentProcessing` gives the default to the config and to
+  `imageprocessor.New`; `PIXA_MAX_CONCURRENT_PROCESSING` still overrides it.
+  "Running under upaas" in `README.md` gives the worst-case memory, measured,
+  and tells the operator to set `PIXA_MAX_CONCURRENT_PROCESSING` and
+  `PIXA_UPSTREAM_CONNECTIONS` to fit the container's memory. It also gives the
+  file libvips writes to `/tmp` for each large source, up to 1 GiB, measured,
+  which is outside `/var/lib/pixa` and `cache_max_bytes` and is memory where
+  `/tmp` is a tmpfs.
 - 2026-10-15 logging out ends every login session (closes #256): a login session
   was a cookie with nothing kept on the server, so `/logout` removed it from one
   browser and a copy of it kept working for its 30 days. Every login is made

configs/config.example.yml

@@ -108,10 +108,11 @@ upstream_connections_per_host: 20
 # downstream_timeout has ended first.
 upstream_connections: 64
 
-# Maximum number of images decoded and encoded at once (default: the
+# Maximum number of images decoded and encoded at once (default: half the
-# number of CPUs pixa can use, which follows a container's CPU limit). A
+# number of CPUs pixa can use, at least 1; the number of CPUs follows a
-# request that finds none free waits up to 10 seconds for one, and if none
+# container's CPU limit). A request that finds none free waits up to 10
-# frees up it is answered 503, unless downstream_timeout has ended first.
+# seconds for one, and if none frees up it is answered 503, unless
+# downstream_timeout has ended first.
 # max_concurrent_processing: 4
 
 # How many requests to the image routes (/v1/image/ and /v1/e/) one client

internal/config/concurrency_limits_internal_test.go

@@ -1,6 +1,7 @@
 package config
 
 import (
+	"fmt"
 	"runtime"
 	"testing"
 )
@@ -12,8 +13,8 @@ const (
 )
 
 // TestOmittedConcurrencyLimitsUseDefaults checks that an omitted
-// max_concurrent_processing is the number of CPUs Go uses and an omitted
+// max_concurrent_processing is half the CPUs Go uses, and at least 1, and
-// upstream_connections is 64.
+// an omitted upstream_connections is 64.
 func TestOmittedConcurrencyLimitsUseDefaults(t *testing.T) {
 	t.Parallel()
 
@@ -22,9 +23,9 @@ func TestOmittedConcurrencyLimitsUseDefaults(t *testing.T) {
 		t.Fatalf("minimal config should be valid, got error: %v", err)
 	}
 
-	if c.MaxConcurrentProcessing != runtime.GOMAXPROCS(0) {
+	if c.MaxConcurrentProcessing != max(runtime.GOMAXPROCS(0)/2, 1) {
-		t.Errorf("MaxConcurrentProcessing = %d, want %d, one per CPU",
+		t.Errorf("MaxConcurrentProcessing = %d, want %d, half the CPUs",
-			c.MaxConcurrentProcessing, runtime.GOMAXPROCS(0))
+			c.MaxConcurrentProcessing, max(runtime.GOMAXPROCS(0)/2, 1))
 	}
 
 	if c.UpstreamConnections != 64 {
@@ -32,6 +33,36 @@ func TestOmittedConcurrencyLimitsUseDefaults(t *testing.T) {
 	}
 }
 
+// TestOmittedMaxConcurrentProcessingIsHalfTheCPUsAndAtLeastOne checks
+// that an omitted max_concurrent_processing is half the CPUs Go uses,
+// rounded down, and 1 when Go uses one CPU.
+//
+//nolint:paralleltest // it sets GOMAXPROCS, which other tests read
+func TestOmittedMaxConcurrentProcessingIsHalfTheCPUsAndAtLeastOne(t *testing.T) {
+	cpusBefore := runtime.GOMAXPROCS(0)
+
+	t.Cleanup(func() { runtime.GOMAXPROCS(cpusBefore) })
+
+	for _, tc := range []struct{ cpus, want int }{
+		{1, 1}, {2, 1}, {3, 1}, {8, 4},
+	} {
+		runtime.GOMAXPROCS(tc.cpus)
+
+		c, err := configFromYAML(t, signingKeyLine)
+		if err != nil {
+			t.Fatalf("minimal config should be valid, got error: %v", err)
+		}
+
+		t.Logf("GOMAXPROCS %d: MaxConcurrentProcessing %d",
+			tc.cpus, c.MaxConcurrentProcessing)
+
+		if c.MaxConcurrentProcessing != tc.want {
+			t.Errorf("GOMAXPROCS %d: MaxConcurrentProcessing = %d, want %d",
+				tc.cpus, c.MaxConcurrentProcessing, tc.want)
+		}
+	}
+}
+
 // TestExplicitConcurrencyLimitsAreUsed checks that valid values for the
 // two limits are used as given.
 func TestExplicitConcurrencyLimitsAreUsed(t *testing.T) {
@@ -160,3 +191,19 @@ func TestConcurrencyLimitsFromEnvironment(t *testing.T) {
 		})
 	}
 }
+
+// TestInvalidMaxConcurrentProcessingFromEnvironmentAbortsStartup checks
+// that a PIXA_MAX_CONCURRENT_PROCESSING that is not a whole number of at
+// least 1, an empty one included, aborts startup naming the variable and
+// the key instead of taking the default.
+func TestInvalidMaxConcurrentProcessingFromEnvironmentAbortsStartup(t *testing.T) {
+	for _, value := range []string{"", " ", "0.5", "half", "-1", "4 images"} {
+		t.Run(fmt.Sprintf("value %q", value), func(t *testing.T) {
+			t.Setenv(testMaxConcurrentProcessingVar, value)
+
+			_, err := configFromYAML(t, signingKeyLine)
+			wantStartupError(t, err,
+				testMaxConcurrentProcessingVar, keyMaxConcurrentProcessing)
+		})
+	}
+}

internal/config/config.go

@@ -37,6 +37,14 @@ const (
 	DefaultImageRequestsPerMinute     = 600
 )
 
+// DefaultMaxConcurrentProcessing returns the most images processed at once
+// when max_concurrent_processing is omitted: half the CPUs Go uses
+// (runtime.GOMAXPROCS(0), which follows a container's CPU limit), rounded
+// down, and at least 1.
+func DefaultMaxConcurrentProcessing() int {
+	return max(runtime.GOMAXPROCS(0)/2, 1) //nolint:mnd // half the CPUs
+}
+
 // Configuration key names.
 const (
 	keyDebug                      = "debug"
@@ -297,10 +305,8 @@ func newFromSmartConfig(sc *smartconfig.Config) (*Config, error) {
 			keyUpstreamConnectionsPerHost, DefaultUpstreamConnectionsPerHost),
 		UpstreamConnections: loader.intVal(
 			keyUpstreamConnections, DefaultUpstreamConnections),
-		// Decoding and encoding are CPU-bound, so the default is one image
-		// per CPU Go uses, which follows a container's CPU limit.
 		MaxConcurrentProcessing: loader.intVal(
-			keyMaxConcurrentProcessing, runtime.GOMAXPROCS(0)),
+			keyMaxConcurrentProcessing, DefaultMaxConcurrentProcessing()),
 		UpstreamFetchTimeout: loader.durationVal(
 			keyUpstreamFetchTimeout, DefaultUpstreamFetchTimeout),
 		UpstreamMaxResponseSize: loader.int64Val(

internal/imageprocessor/imageprocessor.go

@@ -7,11 +7,11 @@ import (
 	"errors"
 	"fmt"
 	"io"
-	"runtime"
 	"sync"
 	"time"
 
 	"github.com/davidbyttow/govips/v2/vips"
+	"sneak.berlin/go/pixa/internal/config"
 )
 
 // vipsOnce ensures vips is initialized exactly once.
@@ -20,11 +20,10 @@ import (
 var vipsOnce sync.Once
 
 // initVips initializes libvips with quiet logging, one worker thread per
-// image and no operation cache. Process already works on one image per CPU
+// image and no operation cache. Each request decodes different source
-// by default, so more threads per image would only compete for the CPUs.
+// bytes, so the operation cache would rarely be hit and would hold memory
-// Each request decodes different source bytes, so the operation cache
+// outside MaxConcurrentProcessing; repeated requests are served from
-// would rarely be hit and would hold memory outside MaxConcurrentProcessing;
+// pixa's disk cache instead.
-// repeated requests are served from pixa's disk cache instead.
 func initVips() {
 	vipsOnce.Do(func() {
 		vips.LoggingSettings(nil, vips.LogLevelError)
@@ -179,7 +178,7 @@ type Params struct {
 	// If <= 0, DefaultMaxInputBytes is used.
 	MaxInputBytes int64
 	// MaxConcurrentProcessing is the most images processed at once.
-	// If <= 0, the number of CPUs Go uses (runtime.GOMAXPROCS(0)) is used.
+	// If <= 0, config.DefaultMaxConcurrentProcessing() is used.
 	MaxConcurrentProcessing int
 }
 
@@ -195,7 +194,7 @@ func New(params Params) *ImageProcessor {
 
 	maxConcurrentProcessing := params.MaxConcurrentProcessing
 	if maxConcurrentProcessing <= 0 {
-		maxConcurrentProcessing = runtime.GOMAXPROCS(0)
+		maxConcurrentProcessing = config.DefaultMaxConcurrentProcessing()
 	}
 
 	return &ImageProcessor{

internal/imageprocessor/max_concurrent_processing_internal_test.go

@@ -115,14 +115,14 @@ func waitForEntries(t *testing.T, entered <-chan struct{}, count int) {
 	}
 }
 
-func TestNewDefaultsMaxConcurrentProcessingToCPUs(t *testing.T) {
+func TestNewDefaultsMaxConcurrentProcessingToHalfTheCPUs(t *testing.T) {
 	t.Parallel()
 
 	for _, limit := range []int{0, -1} {
 		proc := New(Params{MaxConcurrentProcessing: limit})
-		if got := cap(proc.processingSemaphore); got != runtime.GOMAXPROCS(0) {
+		if got := cap(proc.processingSemaphore); got != max(runtime.GOMAXPROCS(0)/2, 1) {
-			t.Errorf("MaxConcurrentProcessing %d: %d slots, want %d, one per CPU",
+			t.Errorf("MaxConcurrentProcessing %d: %d slots, want %d, half the CPUs",
-				limit, got, runtime.GOMAXPROCS(0))
+				limit, got, max(runtime.GOMAXPROCS(0)/2, 1))
 		}
 	}
 
@@ -132,6 +132,30 @@ func TestNewDefaultsMaxConcurrentProcessingToCPUs(t *testing.T) {
 	}
 }
 
+// TestNewDefaultIsHalfTheCPUsAndAtLeastOne checks that New, given no
+// MaxConcurrentProcessing, makes one slot for every two CPUs Go uses,
+// rounded down, and one slot when Go uses one CPU.
+//
+//nolint:paralleltest // it sets GOMAXPROCS, which other tests read
+func TestNewDefaultIsHalfTheCPUsAndAtLeastOne(t *testing.T) {
+	cpusBefore := runtime.GOMAXPROCS(0)
+
+	t.Cleanup(func() { runtime.GOMAXPROCS(cpusBefore) })
+
+	for _, tc := range []struct{ cpus, want int }{
+		{1, 1}, {2, 1}, {3, 1}, {8, 4},
+	} {
+		runtime.GOMAXPROCS(tc.cpus)
+
+		got := cap(New(Params{}).processingSemaphore)
+		t.Logf("GOMAXPROCS %d: %d slots", tc.cpus, got)
+
+		if got != tc.want {
+			t.Errorf("GOMAXPROCS %d: %d slots, want %d", tc.cpus, got, tc.want)
+		}
+	}
+}
+
 // TestProcessNeverExceedsMaxConcurrentProcessing starts more Process calls
 // than MaxConcurrentProcessing allows and holds the first ones inside
 // Process until the test lets them go. No more than the limit may be

internal/imgcache/service.go

@@ -53,7 +53,7 @@ type ServiceConfig struct {
 	// Allowlist is the list of hosts that don't require signatures
 	Allowlist []string
 	// MaxConcurrentProcessing is the most images processed at once; zero
-	// uses the image processor's default, one per CPU
+	// uses the image processor's default, half the CPUs
 	MaxConcurrentProcessing int
 	// Logger for logging
 	Logger *slog.Logger