Give the largest measured per-image memory in "Running under upaas"

The per-image figure is now the largest peak measured over one
8192x8192 source of each source format, with 16-bit PNG, 12-bit AVIF,
and 16-bit and 32-bit floating-point JPEG XL sources too, each saved at
full size to every output format with pixad's libvips settings: 4.2 GiB,
for the 16-bit JPEG XL saved as WebP. Temporary files says that for a
GIF, WebP, AVIF or JPEG XL source the decoded pixels are held in memory
as well as written to /tmp.

Model: opus-5-5

README.md

@@ -123,28 +123,37 @@ What the [upaas](https://git.eeqj.de/sneak/upaas) app for pixa needs:
       comma-separated; default none. Every image on a listed host is served to
       anyone without a signature, so list only hosts you control, where nobody
       else can put images.
-    - `PIXA_CACHE_MAX_BYTES`: disk cache limit in bytes; `0` disables it;
-      default 75% of (free space + what the cache holds)
+    - `PIXA_CACHE_MAX_BYTES`: disk cache limit in bytes; `0` disables it. Set
+      it: the volume is a directory on the host's filesystem, shared with the
+      host and every other app. The default is 75% of the sum of that
+      filesystem's free space and what the cache holds, and at least 500 MiB, so
+      the cache can grow to three quarters or more of the space they all have
+      left, and to all of it when that is 500 MiB or less.
     - the rest are in the table under Configuration below
-- **Memory:** pixa can use up to `max_concurrent_processing` times 1.6 GiB for
+- **Memory:** pixa can use up to `max_concurrent_processing` times 4.2 GiB for
   the images it processes at once, plus `upstream_connections` times
   `upstream_max_response_size` for the source images it has fetched that wait
-  for processing. 1.6 GiB is the most pixad's resident memory was measured to
-  grow while it processed one 8192x8192 source, the largest it accepts, into
-  each output format in turn, one at a time; it grew most for a 40 MB JPEG of
-  random pixels saved as AVIF. At the defaults that is half the CPUs pixa sees
-  times 1.6 GiB, plus 64 times 50 MiB: on a host where pixa sees 48 CPUs, 24
-  times 1.6 GiB plus 3.1 GiB, about 42 GiB. Set `PIXA_MAX_CONCURRENT_PROCESSING`
-  and `PIXA_UPSTREAM_CONNECTIONS` so that this fits the memory the container may
+  for processing. 4.2 GiB is the most resident memory was measured to grow while
+  pixa, with pixad's libvips settings, processed one 8192x8192 source, the
+  largest it accepts, saving it at full size to each output format in turn, one
+  at a time. The sources were a JPEG, a GIF, a WebP, an 8-bit and a 16-bit PNG,
+  an 8-bit and a 12-bit AVIF, and an 8-bit, a 16-bit and a 32-bit floating-point
+  JPEG XL; memory grew most for the 16-bit JPEG XL, of random pixels, saved as
+  WebP. At the defaults that is half the CPUs pixa sees times 4.2 GiB, plus 64
+  times 50 MiB: on a host where pixa sees 48 CPUs, 24 times 4.2 GiB plus 3.1
+  GiB, about 104 GiB. Set `PIXA_MAX_CONCURRENT_PROCESSING` and
+  `PIXA_UPSTREAM_CONNECTIONS` so that this fits the memory the container may
   use.
 - **Temporary files:** while pixa processes a large source, libvips writes its
   decoded pixels to a file in `/tmp` and deletes the file when the image is
-  done. For an 8192x8192 source the file was measured on pixad at 192 MiB for an
-  8-bit RGB JPEG, 512 MiB for a 16-bit RGBA PNG or JPEG XL, and 1 GiB for a JPEG
-  XL of 32-bit floating-point RGBA, the largest measured: up to 1 GiB per image
-  processed at once, 24 GiB at the defaults on a host where pixa sees 48 CPUs.
-  This `/tmp` is in the container's own filesystem, not on the volume at
-  `/var/lib/pixa`, and `cache_max_bytes` does not count it. The 1.6 GiB above
+  done. For a GIF, WebP, AVIF or JPEG XL source the decoded pixels are held in
+  memory as well as written to that file, and the 4.2 GiB above includes that
+  memory. For an 8192x8192 source the file was measured on pixad at 192 MiB for
+  an 8-bit RGB JPEG, 512 MiB for a 16-bit RGBA PNG or JPEG XL, and 1 GiB for a
+  JPEG XL of 32-bit floating-point RGBA, the largest measured: up to 1 GiB per
+  image processed at once, 24 GiB at the defaults on a host where pixa sees 48
+  CPUs. This `/tmp` is in the container's own filesystem, not on the volume at
+  `/var/lib/pixa`, and `cache_max_bytes` does not count it. The 4.2 GiB above
   does not include these files; where `/tmp` is a tmpfs, they are memory on top
   of it.
 - **Health check:** the image's `HEALTHCHECK` requests
@@ -335,9 +344,26 @@ cache at once, they share one upstream fetch (or one read of the cached source)
 and one transcode: the first request does the work, and the others wait for its
 image or its error, holding no upstream connection or processing slot of their
 own. A waiting request stops waiting when its own client goes away. The work
-goes on for the others even if the first request's client goes away, until that
-request's `downstream_timeout` ends. The shared fetch sends the first request's
-ID upstream, and the lines logged for the fetch and the transcode carry that ID.
+goes on for the others even if the first request's client goes away. The shared
+fetch sends the first request's ID upstream, and the lines logged for the fetch
+and the transcode carry that ID.
+
+A transcode whose request's `downstream_timeout` has ended (for a shared one,
+the first request's) stops waiting for a processing slot, or, once it has one,
+gives it back without beginning to encode. A request waiting for a shared
+transcode that stops this way is answered 503 with the error
+`server busy, try again later`, though its own `downstream_timeout` may not have
+ended. govips gives pixa no way to stop libvips once an encode has begun, so an
+encode keeps its slot until it finishes, which can be after
+`downstream_timeout`. The limit of 8192 on each side of the source and of the
+output bounds how long that takes. With one libvips thread, as pixad runs it,
+encoding 8192x8192 random pixels takes up to about 1 second as JPEG, 15 as PNG,
+16 as GIF, 63 as WebP, 110 as AVIF and 96 as JPEG XL, the slowest of 8 or 16
+bits per sample, with or without an alpha channel. WebP, AVIF and JPEG XL are
+that slow only with an alpha channel: 8-bit RGB takes about 44, 53 and 28
+seconds. Decoding such a source adds up to about 11 seconds. A WebP, AVIF or
+JPEG XL encode can therefore hold its slot past the default `downstream_timeout`
+of 60 seconds.
 
 The login form (`POST /`) is limited to 5 attempts per minute per client
 address, counting an IPv6 client by its /64; an attempt over the limit is
@@ -663,7 +689,10 @@ See `configs/config.example.yml` for all options with defaults.
 - **Metrics**: Prometheus, at `/metrics`: generic HTTP request metrics
   (duration, response size, requests in flight) and the Go runtime and process
   metrics; requests are measured and `/metrics` is served only when
-  `metrics.username` and `metrics.password` are set
+  `metrics.username` and `metrics.password` are set. A request's `handler` label
+  is the pattern of the route it matches, such as `/v1/image/*`, never its path.
+  Requests that match no route share the label `unmatched`: those the router
+  answers 404 or 405, and CORS preflights
 - **Logging**: stdlib slog
 
 ## Entrypoints

TODO.md

@@ -33,7 +33,7 @@ P2: security: per-origin rate limiting
 - 2026-10-15 `max_concurrent_processing` defaults to half the CPUs pixa sees,
   rounded down, and at least 1 (closes #242): it defaulted to one image per CPU,
   and a container with no CPU limit sees every CPU of the host, so on a 48-CPU
-  host pixa processed 48 images at once, each of which can take about 1.6 GiB.
+  host pixa processed 48 images at once, each of which can take about 4.2 GiB.
   `config.DefaultMaxConcurrentProcessing` gives the default to the config and to
   `imageprocessor.New`; `PIXA_MAX_CONCURRENT_PROCESSING` still overrides it.
   "Running under upaas" in `README.md` gives the worst-case memory, measured,
@@ -42,6 +42,40 @@ P2: security: per-origin rate limiting
   file libvips writes to `/tmp` for each large source, up to 1 GiB, measured,
   which is outside `/var/lib/pixa` and `cache_max_bytes` and is memory where
   `/tmp` is a tmpfs.
+- 2026-10-15 a transcode stops once its request's `downstream_timeout` has
+  ended, unless it has begun encoding (closes #243): the image processor looked
+  at its context only while it waited for a processing slot, so an image was
+  decoded and encoded, holding the slot, however long after its request's
+  deadline that took. `Process` now returns the context's error, and gives the
+  slot back, when the context has ended by the time it has the slot or before it
+  encodes. A request that waited for a shared transcode stopped at the first
+  request's deadline is answered 503 `server busy, try again later`, not 500,
+  though its own `downstream_timeout` may not have ended. govips gives pixa no
+  way to stop libvips once an encode has begun, so that encode keeps its slot
+  until it finishes; the limit of 8192 on each side of the source and of the
+  output bounds how long that takes. With one libvips thread, 8192x8192 random
+  pixels take up to about 1 second to encode as JPEG, 15 as PNG, 16 as GIF, 63
+  as WebP, 110 as AVIF and 96 as JPEG XL, the last three with an alpha channel,
+  plus up to about 11 seconds to decode the source; `README.md` gives these
+  times and no longer says the work stops when `downstream_timeout` ends. The
+  settings of the WebP, AVIF and JPEG XL encoders, which can hold a slot past
+  the default `downstream_timeout` of 60 seconds, are unchanged.
+- 2026-10-15 "Running under upaas" in `README.md` tells the operator to set
+  `PIXA_CACHE_MAX_BYTES` (closes #251): it listed the variable as optional, but
+  under upaas the volume is a directory on the host's filesystem. The default,
+  75% of the sum of that filesystem's free space and what the cache holds, and
+  at least 500 MiB, let one pixa take three quarters or more of the space the
+  host and every other app had left, and all of it when that was 500 MiB or
+  less. The section now says so. The default is unchanged.
+- 2026-10-15 the request metrics are labelled by route, not by path (closes
+  #254): their `handler` label was each request's path, so every new path, a 404
+  or an encrypted URL, added series to the Prometheus registry that were never
+  removed, and `/metrics` listed every encrypted URL's token. The label is now
+  the pattern of the chi route the request matches, such as `/v1/image/*`, or
+  `unmatched` for a request that matches none: one the router answers 404 or
+  405, or a CORS preflight. The metrics library takes the label before the
+  request is routed, so the metrics middleware asks the router which route
+  matches.
 - 2026-10-15 expired negative cache rows are removed on a schedule (closes
   #244): the row of a failed fetch, which makes pixa answer 502 for that source
   URL for 5 minutes, was deleted only when the same URL was requested again
@@ -545,11 +579,11 @@ P2: security: per-origin rate limiting
   cancellation but keeps its deadline, and the others wait for its image or
   error holding no upstream connection or processing slot, and stop waiting when
   their own context ends; the request doing the processing waits for it even
-  then, up to its deadline; a request whose context has already ended starts
-  nothing; each request counts one miss, and the processing counts its fetch and
-  transcode once; a panic while processing is reported to Sentry when
-  `sentry_dsn` is set and becomes an error for every waiting request instead of
-  stopping pixad; documented in `README.md`.
+  then, until it ends, which can be after its deadline; a request whose context
+  has already ended starts nothing; each request counts one miss, and the
+  processing counts its fetch and transcode once; a panic while processing is
+  reported to Sentry when `sentry_dsn` is set and becomes an error for every
+  waiting request instead of stopping pixad; documented in `README.md`.
 - 2026-09-29 only the image routes send CORS headers (closes #98): the CORS
   middleware, with the `access_control_allow_origin` origin, moved from the
   router root onto a `/v1` subrouter holding `/v1/image/` and `/v1/e/`, where it

internal/config/config.go

@@ -42,9 +42,7 @@ const (
 // (runtime.GOMAXPROCS(0), which follows a container's CPU limit), rounded
 // down, and at least 1.
 func DefaultMaxConcurrentProcessing() int {
-	const cpusPerImage = 2
-
-	return max(runtime.GOMAXPROCS(0)/cpusPerImage, 1)
+	return max(runtime.GOMAXPROCS(0)/2, 1) //nolint:mnd // half the CPUs
 }
 
 // Configuration key names.

internal/handlers/image.go

@@ -240,7 +240,8 @@ func (s *Handlers) respondImageError(
 	}
 
 	if errors.Is(err, httpfetcher.ErrTooManyConnections) ||
-		errors.Is(err, imageprocessor.ErrTooManyImages) {
+		errors.Is(err, imageprocessor.ErrTooManyImages) ||
+		errors.Is(err, imgcache.ErrProcessingTimedOut) {
 		s.respondError(w, "server busy, try again later",
 			http.StatusServiceUnavailable)
 

internal/handlers/imageenc.go

@@ -158,7 +158,8 @@ func (s *Handlers) handleImageError(w http.ResponseWriter, err error) {
 	case errors.Is(err, httpfetcher.ErrUpstreamTimeout):
 		s.respondError(w, "upstream timeout", http.StatusGatewayTimeout)
 	case errors.Is(err, httpfetcher.ErrTooManyConnections),
-		errors.Is(err, imageprocessor.ErrTooManyImages):
+		errors.Is(err, imageprocessor.ErrTooManyImages),
+		errors.Is(err, imgcache.ErrProcessingTimedOut):
 		s.respondError(w, "server busy, try again later",
 			http.StatusServiceUnavailable)
 	case errors.Is(err, httpfetcher.ErrInvalidContentType),

internal/handlers/server_busy_internal_test.go

@@ -1,6 +1,7 @@
 package handlers
 
 import (
+	"context"
 	"fmt"
 	"log/slog"
 	"net/http"
@@ -47,3 +48,40 @@ func TestServerBusyAnswers503(t *testing.T) {
 		}
 	}
 }
+
+// TestProcessingTimedOutAnswers503 checks that respondImageError and
+// handleImageError, which answer the errors of the two image routes, answer
+// 503 with the server busy error when the image service reports that
+// processing stopped at the deadline of the request doing it, wrapped as the
+// service wraps it. A request that waited for that processing gets this error
+// while its own deadline may have time left. The request's source only goes
+// into a log line, so it is left empty.
+func TestProcessingTimedOutAnswers503(t *testing.T) {
+	t.Parallel()
+
+	h := &Handlers{log: slog.New(slog.DiscardHandler)}
+	err := fmt.Errorf("%w: failed to encode: %w",
+		imgcache.ErrProcessingTimedOut, context.DeadlineExceeded)
+
+	plain := httptest.NewRecorder()
+	h.respondImageError(plain, &imgcache.ImageRequest{}, err)
+
+	encrypted := httptest.NewRecorder()
+	h.handleImageError(encrypted, err)
+
+	for name, rec := range map[string]*httptest.ResponseRecorder{
+		"respondImageError": plain, "handleImageError": encrypted,
+	} {
+		t.Logf("%s: status = %d, body = %q", name, rec.Code, rec.Body.String())
+
+		if rec.Code != http.StatusServiceUnavailable {
+			t.Errorf("%s: status = %d, want %d",
+				name, rec.Code, http.StatusServiceUnavailable)
+		}
+
+		if !strings.Contains(rec.Body.String(), "server busy, try again later") {
+			t.Errorf("%s: body = %q, want the server busy error",
+				name, rec.Body.String())
+		}
+	}
+}

internal/imageprocessor/deadline_internal_test.go

@@ -0,0 +1,106 @@
+package imageprocessor
+
+import (
+	"bytes"
+	"context"
+	"errors"
+	"io"
+	"testing"
+	"time"
+)
+
+// readerAfterDeadline is a Process input whose first Read waits until done
+// is closed, so the deadline passes after Process has taken its slot and
+// before it encodes.
+type readerAfterDeadline struct {
+	data   *bytes.Reader
+	done   <-chan struct{}
+	waited bool
+}
+
+func (r *readerAfterDeadline) Read(p []byte) (int, error) {
+	if !r.waited {
+		r.waited = true
+
+		<-r.done
+	}
+
+	return r.data.Read(p)
+}
+
+// inputNotToBeRead is a Process input that fails the test when it is read.
+type inputNotToBeRead struct {
+	t *testing.T
+}
+
+func (r inputNotToBeRead) Read([]byte) (int, error) {
+	r.t.Error("Process read its input although its deadline had passed")
+
+	return 0, io.EOF
+}
+
+// TestProcessStopsWhenDeadlinePassed checks that Process returns
+// context.DeadlineExceeded, and holds no slot afterwards, when its context's
+// deadline has passed before it starts, then without reading its input, or
+// while it reads its input. govips gives pixa no way to stop libvips once an
+// encode has begun, so Process must not begin one for a request that has
+// ended.
+func TestProcessStopsWhenDeadlinePassed(t *testing.T) {
+	t.Parallel()
+
+	input := createTestJPEG(t, 50, 50)
+
+	t.Run("before Process starts", func(t *testing.T) {
+		t.Parallel()
+
+		ctx, cancel := context.WithDeadline(t.Context(),
+			time.Now().Add(-time.Second))
+		defer cancel()
+
+		// With a slot free, the select in acquireSlot takes the slot or sees
+		// the ended context at random, so Process is called many times
+		for range 100 {
+			checkProcessStopsAtDeadline(ctx, t, inputNotToBeRead{t: t})
+		}
+	})
+
+	t.Run("while Process reads its input", func(t *testing.T) {
+		t.Parallel()
+
+		ctx, cancel := context.WithTimeout(t.Context(), 100*time.Millisecond)
+		defer cancel()
+
+		checkProcessStopsAtDeadline(ctx, t, &readerAfterDeadline{
+			data: bytes.NewReader(input), done: ctx.Done(),
+		})
+	})
+}
+
+// checkProcessStopsAtDeadline runs Process on input with ctx, whose deadline
+// has passed by the time Process could encode, and fails the test unless
+// Process returns context.DeadlineExceeded and gives its slot back.
+func checkProcessStopsAtDeadline(
+	ctx context.Context, t *testing.T, input io.Reader,
+) {
+	t.Helper()
+
+	proc := New(Params{MaxConcurrentProcessing: 1})
+
+	result, err := proc.Process(ctx, input, smallJPEGRequest())
+	if result != nil {
+		t.Logf("Process() made a %dx%d image after its deadline passed",
+			result.Width, result.Height)
+
+		_ = result.Content.Close()
+	}
+
+	t.Logf("Process() error = %v", err)
+
+	if !errors.Is(err, context.DeadlineExceeded) {
+		t.Errorf("Process() error = %v, want context.DeadlineExceeded", err)
+	}
+
+	if held := len(proc.processingSemaphore); held != 0 {
+		t.Errorf("%d slots still held after Process() returned", held)
+	}
+}

internal/imageprocessor/imageprocessor.go

@@ -207,7 +207,10 @@ func New(params Params) *ImageProcessor {
 // Process transforms an image according to the request. When
 // MaxConcurrentProcessing images are already being processed, it waits up
 // to ProcessingWaitTimeout for one to finish, then fails with
-// ErrTooManyImages.
+// ErrTooManyImages. When ctx has ended once Process has a slot, or before it
+// encodes, it returns ctx's error and gives the slot back. govips gives pixa
+// no way to stop libvips once an encode has begun, so an encode keeps its
+// slot until it finishes.
 func (p *ImageProcessor) Process(
 	ctx context.Context,
 	input io.Reader,
@@ -289,7 +292,7 @@ func (p *ImageProcessor) Process(
 	}
 
 	// Encode to target format
-	output, err := p.encode(img, outputFormat, req.Quality)
+	output, err := p.encode(ctx, img, outputFormat, req.Quality)
 	if err != nil {
 		return nil, fmt.Errorf("failed to encode: %w", err)
 	}
@@ -416,25 +419,28 @@ func (p *ImageProcessor) WaitForProcessing(ctx context.Context) int {
 
 // acquireSlot takes a slot in processingSemaphore, waiting at most
 // processingWaitTimeout for one to free up, and returns the func that gives
-// it back. A free slot is taken even when ctx has ended; only the wait for
-// one stops when ctx ends, as the rest of Process does not check ctx.
+// it back. When ctx has ended by the time it has a slot, it gives the slot
+// back and returns ctx's error.
 func (p *ImageProcessor) acquireSlot(ctx context.Context) (func(), error) {
-	release := func() { <-p.processingSemaphore }
-
 	select {
 	case p.processingSemaphore <- struct{}{}:
-		return release, nil
-	default:
-	}
-
-	select {
-	case p.processingSemaphore <- struct{}{}:
-		return release, nil
 	case <-time.After(p.processingWaitTimeout):
 		return nil, ErrTooManyImages
 	case <-ctx.Done():
 		return nil, ctx.Err()
 	}
+
+	release := func() { <-p.processingSemaphore }
+
+	// select takes the slot even when ctx has ended at the same moment
+	err := ctx.Err()
+	if err != nil {
+		release()
+
+		return nil, err
+	}
+
+	return release, nil
 }
 
 // detectFormat returns the format string for a govips image type.
@@ -526,10 +532,17 @@ func (p *ImageProcessor) resize(
 
 const defaultQuality = 85
 
-// encode encodes an image to the specified format.
+// encode encodes an image to the specified format. govips gives pixa no way
+// to stop libvips once an encode has begun, so when ctx has ended encode
+// returns ctx's error without beginning one.
 func (p *ImageProcessor) encode(
-	img *vips.ImageRef, format Format, quality int,
+	ctx context.Context, img *vips.ImageRef, format Format, quality int,
 ) ([]byte, error) {
+	err := ctx.Err()
+	if err != nil {
+		return nil, err
+	}
+
 	if quality <= 0 {
 		quality = defaultQuality
 	}
@@ -539,7 +552,7 @@ func (p *ImageProcessor) encode(
 	// libvips' built-in profile; govips' own sRGB path variable is set on
 	// first use but read without a lock, so concurrent requests race on it.
 	if img.HasICCProfile() {
-		err := img.TransformICCProfileWithFallback("srgb", "srgb")
+		err = img.TransformICCProfileWithFallback("srgb", "srgb")
 		if err != nil {
 			return nil, fmt.Errorf("failed to convert to sRGB: %w", err)
 		}
@@ -631,10 +644,11 @@ func exportWebP(img *vips.ImageRef, quality int) ([]byte, error) {
 
 // avifEffort is the AVIF effort, from 0 (fastest) to 9; 1 is the lowest
 // govips can set. With one thread, as pixad runs libvips, 1 takes about 51
-// seconds to save an 8192x8192 image of random pixels, the worst case,
-// against the default downstream_timeout of 60 seconds. On an image of
-// milder noise, which 1 saves in about 12 seconds, 2 takes nearly a minute
-// and libvips' default, 4, takes minutes.
+// seconds to save an 8192x8192 RGB image of random pixels, and about 110
+// with an alpha channel, the worst case, against the default
+// downstream_timeout of 60 seconds. On an image of milder noise, which 1
+// saves in about 12 seconds, 2 takes nearly a minute and libvips' default,
+// 4, takes minutes.
 const avifEffort = 1
 
 // avifBitdepth is the AVIF bit depth, 8 bits per sample for every image.

internal/imgcache/concurrent_misses_internal_test.go

@@ -15,6 +15,7 @@ import (
 
 	"github.com/getsentry/sentry-go"
 	"sneak.berlin/go/pixa/internal/httpfetcher"
+	"sneak.berlin/go/pixa/internal/imageprocessor"
 	"sneak.berlin/go/pixa/internal/magic"
 )
 
@@ -435,6 +436,47 @@ func TestService_Get_ReturnsByItsDeadline(t *testing.T) {
 	}
 }
 
+// TestService_Get_WaiterGetsProcessingTimedOut has a request with no deadline
+// join the held fetch of a first request with a short one. With the only
+// processing slot held, the first request's transcode waits for it until the
+// first request's deadline ends, and stops then. The waiting request, whose
+// own context has not ended, must get ErrProcessingTimedOut, which the image
+// routes answer 503 as when pixa is busy.
+func TestService_Get_WaiterGetsProcessingTimedOut(t *testing.T) {
+	t.Parallel()
+
+	svc, fixtures, fetcher := setupHeldFetchService(t)
+	svc.processor = imageprocessor.New(
+		imageprocessor.Params{MaxConcurrentProcessing: 1},
+	)
+
+	holdProcessingSlot(t, svc.processor)
+
+	const firstTimeout = 500 * time.Millisecond
+
+	firstCtx, cancelFirst := context.WithTimeout(t.Context(), firstTimeout)
+	defer cancelFirst()
+
+	first := startGet(firstCtx, svc, photoVariant(fixtures, 85, FitCover))
+
+	<-fetcher.started
+
+	waiter := startGet(t.Context(), svc, photoVariant(fixtures, 85, FitCover))
+
+	time.Sleep(arrivalWait)
+	fetcher.releaseFetches()
+
+	t.Logf("first request: Get() error = %v", (<-first).err)
+
+	got := <-waiter
+	t.Logf("waiting request: Get() error = %v", got.err)
+
+	if !errors.Is(got.err, ErrProcessingTimedOut) {
+		t.Errorf("waiting request: Get() error = %v, want %v",
+			got.err, ErrProcessingTimedOut)
+	}
+}
+
 // panickingFetcher panics on every fetch.
 type panickingFetcher struct{}
 

internal/imgcache/service.go

@@ -129,6 +129,12 @@ func NewService(cfg *ServiceConfig) (*Service, error) {
 // ErrNegativeCached is returned when a URL is in the negative cache (recently failed).
 var ErrNegativeCached = errors.New("request is in negative cache (recently failed)")
 
+// ErrProcessingTimedOut is returned when processing an image stopped because
+// the downstream_timeout of the request doing it ended, to that request and to
+// every request that waited for its image.
+var ErrProcessingTimedOut = errors.New(
+	"image processing stopped at the deadline of the request doing it")
+
 // Get retrieves a processed image, fetching and processing if necessary.
 // While its source URL is in the negative cache, a cached variant is still
 // served and a variant not in the cache is still made from a cached source;
@@ -549,7 +555,13 @@ func (s *Service) processAndStore(
 		FitMode: imageprocessor.FitMode(req.FitMode),
 	}
 
+	// ctx has the deadline of the request doing the processing, which can
+	// end while a request waiting for its image has time left
 	processResult, err := s.processor.Process(ctx, source, processReq)
+	if errors.Is(err, context.DeadlineExceeded) {
+		return nil, fmt.Errorf("%w: %w", ErrProcessingTimedOut, err)
+	}
+
 	if err != nil {
 		return nil, fmt.Errorf("image processing failed: %w", err)
 	}

internal/middleware/middleware.go

@@ -8,12 +8,15 @@ import (
 	"net/http"
 	"net/netip"
 	"regexp"
+	"strings"
 	"time"
 
 	basicauth "github.com/99designs/basicauth-go"
+	"github.com/go-chi/chi/v5"
 	"github.com/go-chi/chi/v5/middleware"
 	"github.com/go-chi/cors"
 	"github.com/go-chi/httprate"
+	"github.com/prometheus/client_golang/prometheus"
 	metrics "github.com/slok/go-http-metrics/metrics/prometheus"
 	ghmm "github.com/slok/go-http-metrics/middleware"
 	"github.com/slok/go-http-metrics/middleware/std"
@@ -63,6 +66,10 @@ type Middleware struct {
 	log      *slog.Logger
 	config   *config.Config
 	clientIP *clientip.Resolver
+
+	// metricsRegistry is the registry Metrics registers its metrics with.
+	// nil is Prometheus' default registry, the one /metrics serves.
+	metricsRegistry prometheus.Registerer
 }
 
 // New creates a new Middleware instance.
@@ -209,17 +216,65 @@ func (s *Middleware) CORS() func(http.Handler) http.Handler {
 	})
 }
 
-// Metrics returns a Prometheus metrics middleware.
+// Metrics returns a Prometheus metrics middleware. Its handler label is the
+// pattern of the chi route a request matches, such as /v1/image/*, or
+// "unmatched" for a request that matches none, so the routes fix how many
+// values the label has. It is never the path, with which any client could
+// add series to the registry without limit.
 func (s *Middleware) Metrics() func(http.Handler) http.Handler {
 	mdlw := ghmm.New(ghmm.Config{
-		Recorder: metrics.NewRecorder(metrics.Config{}),
+		Recorder: metrics.NewRecorder(metrics.Config{
+			Registry: s.metricsRegistry,
+		}),
 	})
 
 	return func(next http.Handler) http.Handler {
-		return std.Handler("", mdlw, next)
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			std.Handler(routePattern(r), mdlw, next).ServeHTTP(w, r)
+		})
 	}
 }
 
+// routePattern returns the pattern of the chi route r matches, or
+// "unmatched" when it matches none or is not served by a chi router. The
+// metrics library takes the label before the request is routed, so the
+// router is asked which route matches, with the path it routes on:
+// r.URL.RawPath when set, else r.URL.Path, else /.
+func routePattern(r *http.Request) string {
+	pattern := ""
+
+	rctx := chi.RouteContext(r.Context())
+	if rctx != nil {
+		path := r.URL.RawPath
+		if path == "" {
+			path = r.URL.Path
+		}
+
+		if path == "" {
+			path = "/"
+		}
+
+		pattern = rctx.Routes.Find(chi.NewRouteContext(), r.Method, path)
+
+		// For the path a subrouter is mounted at, such as /v1 or /v1/, Find
+		// answers that path without asking the subrouter, which chi hands
+		// the request as /.
+		for _, route := range rctx.Routes.Routes() {
+			if route.SubRoutes != nil &&
+				route.Pattern == strings.TrimSuffix(pattern, "/")+"/*" &&
+				!route.SubRoutes.Match(chi.NewRouteContext(), r.Method, "/") {
+				pattern = ""
+			}
+		}
+	}
+
+	if pattern == "" {
+		return "unmatched"
+	}
+
+	return pattern
+}
+
 // MetricsAuth returns a basic auth middleware for the metrics endpoint.
 func (s *Middleware) MetricsAuth() func(http.Handler) http.Handler {
 	return basicauth.New(

internal/middleware/middleware_internal_test.go

@@ -3,12 +3,15 @@ package middleware
 import (
 	"bytes"
 	"log/slog"
+	"maps"
 	"net/http"
 	"net/http/httptest"
 	"net/url"
 	"strings"
 	"testing"
 
+	"github.com/go-chi/chi/v5"
+	"github.com/prometheus/client_golang/prometheus"
 	"github.com/prometheus/client_golang/prometheus/promhttp"
 
 	"sneak.berlin/go/pixa/internal/config"
@@ -198,7 +201,7 @@ func TestMetricsRecordsServedRequest(t *testing.T) {
 
 	// The line /metrics shows once one GET /test has been served.
 	const want = `http_request_duration_seconds_count{` +
-		`code="200",handler="/test",method="GET",service=""} 1`
+		`code="200",handler="unmatched",method="GET",service=""} 1`
 
 	mw := &Middleware{log: slog.Default(), config: &config.Config{}}
 
@@ -220,6 +223,97 @@ func TestMetricsRecordsServedRequest(t *testing.T) {
 	}
 }
 
+// TestMetricsLabelsRequestsByRoute checks that the metrics middleware labels
+// each request with the pattern of the route that answers it, never with its
+// path: two paths one route answers share that route's pattern, and requests
+// no route answers, a 404 or a 405, share "unmatched", among them requests for
+// the path the subrouter is mounted at, /v1 and /v1/. A request with an empty
+// path is answered by the / route, as chi routes it as /, and is labelled /.
+// With a label per path, any client could add series to the registry without
+// limit. The middleware registers with a registry of its own here, as another
+// test in this package registers with Prometheus' default registry, which can
+// be done only once.
+func TestMetricsLabelsRequestsByRoute(t *testing.T) {
+	t.Parallel()
+
+	registry := prometheus.NewRegistry()
+	mw := &Middleware{
+		log:             slog.Default(),
+		config:          &config.Config{},
+		metricsRegistry: registry,
+	}
+
+	// The image route is in a subrouter, as in pixa's router.
+	router := chi.NewRouter()
+	router.Use(mw.Metrics())
+	router.Get("/", func(w http.ResponseWriter, _ *http.Request) {
+		w.WriteHeader(http.StatusOK)
+	})
+	router.Route("/v1", func(r chi.Router) {
+		r.Get("/image/*", func(w http.ResponseWriter, _ *http.Request) {
+			w.WriteHeader(http.StatusOK)
+		})
+	})
+
+	for _, req := range []struct{ method, path string }{
+		{http.MethodGet, "/v1/image/a.example.com/one.jpg/1x1.png"},
+		{http.MethodGet, "/v1/image/b.example.com/two.jpg/1x1.png"},
+		{http.MethodGet, "/no-such-route"},
+		{http.MethodGet, "/v1/no-such-route"},
+		{http.MethodGet, "/v1"},
+		{http.MethodGet, "/v1/"},
+		{http.MethodPost, "/v1/image/a.example.com/one.jpg/1x1.png"},
+		// The request line GET http://pixa.example HTTP/1.1 leaves both
+		// r.URL.Path and r.URL.RawPath empty.
+		{http.MethodGet, "http://pixa.example"},
+	} {
+		r := httptest.NewRequestWithContext(
+			t.Context(), req.method, req.path, nil)
+		t.Logf("%s %s: r.URL.Path %q, r.URL.RawPath %q",
+			req.method, req.path, r.URL.Path, r.URL.RawPath)
+		router.ServeHTTP(httptest.NewRecorder(), r)
+	}
+
+	got := requestCountsByHandler(t, registry)
+	t.Logf("requests counted by handler label: %v", got)
+
+	want := map[string]uint64{"/": 1, "/v1/image/*": 2, "unmatched": 5}
+	if !maps.Equal(got, want) {
+		t.Errorf("requests counted by handler label = %v, want %v", got, want)
+	}
+}
+
+// requestCountsByHandler returns how many requests the request duration
+// histogram in registry counted under each value of its handler label.
+func requestCountsByHandler(
+	t *testing.T, registry *prometheus.Registry,
+) map[string]uint64 {
+	t.Helper()
+
+	families, err := registry.Gather()
+	if err != nil {
+		t.Fatalf("registry.Gather() error = %v", err)
+	}
+
+	counts := map[string]uint64{}
+
+	for _, family := range families {
+		if family.GetName() != "http_request_duration_seconds" {
+			continue
+		}
+
+		for _, metric := range family.GetMetric() {
+			for _, label := range metric.GetLabel() {
+				if label.GetName() == "handler" {
+					counts[label.GetValue()] += metric.GetHistogram().GetSampleCount()
+				}
+			}
+		}
+	}
+
+	return counts
+}
+
 // TestLoggingLeavesOutSubmittedSigningKey checks that a login, a POST /
 // whose form carries the signing key, leaves no trace of the key in the
 // request's log line.