Scale both sides of a fit=cover image by the same amount (part of #282)

cropCentreAndResize cut the centre to whole source pixels and forced
that to the requested size, so the two sides were scaled by different
amounts: a 16x16 source at 100x60 came out squashed by 4%. It now
widens the centre to whole source pixels and lets thumbnail with a
centre crop scale that by the one amount next uses and cut the output
from it. thumbnail copies the scaled image into memory, which is larger
than the output by less than one scaled source pixel on each side.
TODO.md says so.

Model: opus-5-5

README.md

@@ -323,8 +323,9 @@ first `/`, the size and format after the last `/`, and between them the source
 path up to the first `?` and the source query after it. So the `?` before the
 query, any `?` in the query, and every `%` in the source path or query must be
 percent-encoded, as `%3F` and `%25`. Any other character may be written as
-itself or percent-encoded: `/`, `;`, `,`, `=` and `&` work either way. For
+itself or percent-encoded: `/`, `;`, `,`, `=` and `&` work either way. Neither
-example,
+the source path nor the source query may hold a `#`, and an image URL that
+writes one as `%23` is refused with 400. For example,
 `https://cdn.example.com/img?url=https://origin.example.com/my%20cat.jpg` at
 800x600 WebP is
 `/v1/image/cdn.example.com/img%3Furl=https://origin.example.com/my%2520cat.jpg/800x600.webp`,
@@ -575,7 +576,11 @@ pixa lower-cases the host of a `/v1/image/` URL before anything else uses it, so
 `CDN.Example.com` is matched, fetched, cached and counted against
 `upstream_connections_per_host` as `cdn.example.com`. Such a URL whose host has
 a port, as in `cdn.example.com:8443`, or a `:` with no port, needs a signature
-even when the host is allowlisted. A host holding `@` is refused with 400.
+even when the host is allowlisted. The host must be a host name or an IPv4
+address (letters, digits, hyphens, underscores and dots) or an IPv6 address in
+brackets, either one optionally followed by `:` and a port. Any other host, such
+as one holding `@`, or a `?`, `#`, `%`, `\` or space written percent-encoded, is
+refused with 400.
 
 ### Configuration
 

TODO.md

@@ -42,6 +42,22 @@ P2: security: per-origin rate limiting
   resident memory peaked at about 242 MiB for the 8192x64 source and 431 MiB for
   the 8192x1 one. The output can sit a fraction of an output pixel from where it
   was.
+- 2026-10-15 a `/v1/image/` URL whose source path or source query holds a `#`,
+  written as `%23`, is refused with 400 (closes #286): the source URL built from
+  it ended at the `#` when fetched, so each text after it fetched the same
+  upstream image, without a signature for an allowlisted host, and cached it
+  under keys of its own. `README.md` says neither may hold a `#`.
+- 2026-10-15 the host of a `/v1/image/` URL must be a host name or an IPv4
+  address (letters, digits, hyphens, underscores and dots) or an IPv6 address in
+  brackets, either one optionally followed by `:` and a port, and any other host
+  is refused with 400 (closes #275): only `@` was refused, so a `?` written as
+  `%3F` gave the host `cdn.example.com?x=1`, which Go's URL parser reads as
+  `cdn.example.com` with a query. Such a URL passed the allowlist, and each text
+  after the `?` fetched the host's root path and cached the answer under keys of
+  its own. A `#`, `%`, `\` or space written percent-encoded is refused the same
+  way, and so is an IPv6 address without brackets, which needed a signature
+  before. Underscores are kept because `allowlist_hosts` accepts host names
+  holding them.
 - 2026-10-15 the README says how a source URL with a query is written into an
   image URL, and the image route accepts it (closes #255): the query follows the
   source path after `%3F`. pixa now reads the image URL's path decoded once, so

internal/handlers/image_errors_internal_test.go

@@ -264,3 +264,127 @@ func TestHandleImage_AllowlistOrSignature(t *testing.T) {
 		})
 	}
 }
+
+// TestHandleImage_InvalidHost_Returns400 sends image URLs whose host no URL
+// host can be, and checks that each is refused with 400 naming the host as
+// decoded: allowlistedHost with a character after it that a URL host cannot
+// hold, percent-encoded, an IPv6 address without brackets, and brackets
+// around something that is not an IPv6 address. A "?" or "#" after
+// allowlistedHost would otherwise end the host when the source URL is read,
+// so the request would pass the allowlist and be fetched and cached under a
+// host that is not the one fetched.
+func TestHandleImage_InvalidHost_Returns400(t *testing.T) {
+	t.Parallel()
+
+	photos := newPhotoFetcher(t, allowlistedHost)
+
+	tests := []struct {
+		name        string
+		writtenHost string
+		decodedHost string
+	}{
+		{"? written as %3F", allowlistedHost + "%3Fx=1", allowlistedHost + "?x=1"},
+		{"# written as %23", allowlistedHost + "%23x", allowlistedHost + "#x"},
+		{"% written as %25", allowlistedHost + "%253F", allowlistedHost + "%3F"},
+		{`\ written as %5C`, allowlistedHost + "%5Cx", allowlistedHost + `\x`},
+		{"space written as %20", allowlistedHost + "%20", allowlistedHost + " "},
+		{"IPv6 address without brackets", "2001:db8::1", "2001:db8::1"},
+		{"IPv4 address in brackets", "[203.0.113.5]", "[203.0.113.5]"},
+		{"no address in brackets", "[abc]", "[abc]"},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			rec := sendGet(t, newImageRoute(t, photos), photoURL(tt.writtenHost))
+			checkErrorBody(t, rec, http.StatusBadRequest,
+				fmt.Sprintf("invalid image URL: invalid source host: %q",
+					tt.decodedHost))
+		})
+	}
+}
+
+// TestHandleImage_HostForms_Served checks that the image route serves, with
+// a valid signature, the image at photoPath on a host name, an IPv4 address,
+// an IPv6 address in brackets, and a host followed by ":" with or without a
+// port.
+func TestHandleImage_HostForms_Served(t *testing.T) {
+	t.Parallel()
+
+	hosts := []string{
+		allowlistedHost,
+		"img_1.example.com",
+		"203.0.113.5",
+		"[2001:db8::1]",
+		allowlistedHost + ":8443",
+		"[2001:db8::1]:8443",
+		allowlistedHost + ":",
+	}
+
+	photos := newPhotoFetcher(t, hosts...)
+	exp := time.Now().Add(time.Hour)
+
+	for _, host := range hosts {
+		t.Run(host, func(t *testing.T) {
+			t.Parallel()
+
+			sig := photoSignature(testSigningKey, host, exp)
+
+			rec := sendGet(t, newImageRoute(t, photos),
+				photoURLWithSig(host, sig, exp))
+			if rec.Code != http.StatusOK {
+				t.Errorf("status = %d, want %d: %s",
+					rec.Code, http.StatusOK, rec.Body)
+			}
+		})
+	}
+}
+
+// TestHandleImage_HashInSourcePathOrQuery_Returns400 sends image URLs whose
+// source path or source query holds a "#", written as %23, and checks that
+// each is refused with 400, the one signed for that source path included. The
+// source URL would otherwise end at the "#" when it is fetched, so each text
+// after it would fetch the image at photoPath and cache it under keys of its
+// own.
+func TestHandleImage_HashInSourcePathOrQuery_Returns400(t *testing.T) {
+	t.Parallel()
+
+	photos := newPhotoFetcher(t, allowlistedHost, signedHost)
+	exp := time.Now().Add(time.Hour)
+
+	sig := signature.New(testSigningKey).Sign(&signature.Request{
+		SourceHost: signedHost,
+		SourcePath: photoPath + "#x",
+		Width:      50,
+		Height:     50,
+		Format:     string(imgcache.FormatJPEG),
+		Quality:    85,
+		FitMode:    string(imgcache.FitCover),
+		Expires:    exp,
+	})
+
+	tests := []struct {
+		name   string
+		target string
+	}{
+		{"# in the source path",
+			"/v1/image/" + allowlistedHost + photoPath + "%23x/50x50.jpeg"},
+		{"# in the source query",
+			"/v1/image/" + allowlistedHost + photoPath + "%3Fv=1%23x/50x50.jpeg"},
+		{"# in the source path, signed",
+			fmt.Sprintf("/v1/image/%s%s%%23x/50x50.jpeg?sig=%s&exp=%d",
+				signedHost, photoPath, sig, exp.Unix())},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			rec := sendGet(t, newImageRoute(t, photos), tt.target)
+			checkErrorBody(t, rec, http.StatusBadRequest,
+				`invalid image URL: invalid image path: `+
+					`the source path or query holds a "#"`)
+		})
+	}
+}

internal/imgcache/urlparser.go

@@ -3,6 +3,7 @@ package imgcache
 import (
 	"errors"
 	"fmt"
+	"net/netip"
 	"net/url"
 	"regexp"
 	"strconv"
@@ -50,6 +51,14 @@ var sizeFormatRegex = regexp.MustCompile(
 // percentEscapeRegex matches one percent-escape, such as "%2e"
 var percentEscapeRegex = regexp.MustCompile(`%[0-9A-Fa-f]{2}`)
 
+// hostRegex matches the forms the host of an image URL may take: a host name
+// or an IPv4 address (letters, digits, "-", "_" and "."), or an IPv6 address
+// in brackets (hex digits, ":" and "."), either one optionally followed by ":"
+// and a port, which may be empty. Its one group holds the text in brackets,
+// which parseImageComponents also checks is an IPv6 address.
+var hostRegex = regexp.MustCompile(
+	`^(?:[A-Za-z0-9_.-]+|\[([0-9A-Fa-f:.]+)\])(?::[0-9]*)?$`)
+
 // ParsedURL contains the parsed components of an image proxy URL.
 type ParsedURL struct {
 	// Host is the source origin host (e.g., "cdn.example.com")
@@ -141,10 +150,20 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 		return nil, ErrMissingHost
 	}
 
-	// A URL reads what comes before "@" as a user name and password, and the
+	// Only the forms hostRegex describes are accepted. A "?", "#" or "@" in
-	// rest as the host
+	// the host would make Go's URL parser, which the allowlist check and the
-	if strings.Contains(host, "@") {
+	// fetcher use, read a different host from the one allowlisted and cached
-		return nil, fmt.Errorf("%w: %q holds @", ErrInvalidHost, host)
+	hostMatch := hostRegex.FindStringSubmatch(host)
+	if hostMatch == nil {
+		return nil, fmt.Errorf("%w: %q", ErrInvalidHost, host)
+	}
+
+	// Go's URL parser refuses brackets around anything but an IPv6 address
+	if inBrackets := hostMatch[1]; inBrackets != "" {
+		addr, err := netip.ParseAddr(inBrackets)
+		if err != nil || !addr.Is6() {
+			return nil, fmt.Errorf("%w: %q", ErrInvalidHost, host)
+		}
 	}
 
 	// Host names do not depend on letter case, so the allowlist, the upstream
@@ -152,6 +171,14 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 	// host
 	host = strings.ToLower(host)
 
+	// Go's URL parser, which the fetcher uses, reads a "#" as the start of a
+	// fragment and drops the rest, so each text after it would be another
+	// spelling, cached under its own keys, of one upstream request
+	if strings.Contains(path, "#") {
+		return nil, fmt.Errorf(
+			`%w: the source path or query holds a "#"`, ErrInvalidPath)
+	}
+
 	// Extract query string if present in path
 	if qIndex := strings.Index(path, "?"); qIndex != -1 {
 		query = path[qIndex+1:]