fix: say an unknown-scale balance the same way on Send and on confirm (closes #377 )

When two addresses' explorer reports disagree on a token's decimals, the Send screen showed the stored figure while the confirmation screen said the balance was unknown. One function in send.js now gives both the balance and scale, so both read `unknown (SYMBOL)`. The confirmation screen's fee-unknown message names its cause: for an unknown scale it says the wallet does not know the token's decimal places and the transaction cannot be sent, instead of asking for a retry that cannot help. Other causes keep the old sentence. Model: opus-5-5
fix: decode Uniswap V2 exact-out swaps, input amount shown as a maximum (closes #283 )
2026-10-04 15:59:15 +02:00 · 2026-10-04 15:09:09 +02:00 · 2026-10-04 14:26:03 +02:00 · 2026-10-04 12:58:26 +02:00 · 2026-10-04 12:24:39 +02:00 · 2026-10-04 11:07:37 +02:00
40 changed files with 2363 additions and 331 deletions
@@ -9,9 +9,9 @@ WORKDIR /app
 ENV AUTISTMASK_LINT_NATIVE=1

 # script/test's default 30s bound is the host figure, against a suite that
-# runs in about 8s there. In here the same suite starts on a cold jest cache
-# and shares the runner with the rest of the build, so 30s is marginal rather
-# than a bound — it killed a healthy suite at 30.6s on a cold CI cache. 180s
+# takes 23-29s there with three jest workers. In here the same suite starts on
+# a cold jest cache and shares the runner with the rest of the build, so 30s
+# is too tight — it killed a healthy suite at 30.6s on a cold CI cache. 180s
 # still catches a hang in three minutes and cannot be tripped by a suite that
 # is merely running on contended hardware.
 ENV AUTISTMASK_TEST_TIMEOUT=180
@@ -892,12 +892,21 @@ shows is a V4 exact-in `amountIn` of zero.
 The rule and its exception live in `src/shared/amountDisplay.js` as
 `truncateAmount()` and `truncateAmountNeverZero()`. Everything the approval and
 confirmation screens display goes through the floored one — the ERC-20 amount,
-the ETH value and max fee (`src/popup/views/approval.js`), and the swap's
-`Amount` and `Min. received` lines (`src/shared/uniswap.js`). The history and
-balance lists (`src/shared/transactions.js`) use the unfloored one: the
-transaction detail view is the authoritative record and already shows exact
-precision. The 4-decimal rule is unchanged everywhere else, including for
-amounts at or above the floor on the approval screens.
+the ETH value and max fee (`src/popup/views/approval.js`), the swap's `Amount`
+and `Min. received` lines (`src/shared/uniswap.js`), the Send screen's
+`Current balance` (`src/popup/views/send.js`), and the balance and network fee
+on the confirmation screen for the wallet's own send
+(`src/popup/views/confirmTx.js`). Both screens render a network fee through
+`formatFee()` in `src/popup/views/helpers.js`, which prices the exact fee in USD
+rather than its truncated figure, so the same fee reads the same on both, USD
+value included. Balances are stored exactly (`src/shared/balances.js`), whatever
+decimals a token declares, so a balance below the floor reaches these screens as
+it is. The history list (`src/shared/transactions.js`) uses the unfloored one:
+the transaction detail view is the authoritative record and already shows exact
+precision. The balance lists use neither: they round to four places with
+`toFixed(4)` (`balanceLine()` in `src/popup/views/helpers.js`). The 4-decimal
+rule is unchanged everywhere else, including for amounts at or above the floor
+on the approval screens.

 The floor applies only where the token's scale is known. Where it is not, the
 approval screen states base units instead of a quantity — see Unknown token
@@ -940,6 +949,13 @@ and compare against. Reading the stored field directly instead answers `null`
 for a bundled or tracked token the explorer merely omitted, which is not a
 refusal the wallet has any reason to make.

+The Send screen also consults every address's explorer reports, so a contract
+two addresses report different `decimals` for has no scale there, and the stored
+balance, formatted at one of those scales, is withdrawn with it. The Send
+screen's `Current balance` and the confirmation screen's balance line then both
+read `unknown (SYMBOL)`. The balance list formats each explorer row as it is
+fetched, without that cross-address check, and shows the row's figure.
+
 **Decoded amount lines on the transaction approval screen:** the `Amount` line
 of a decoded ERC-20 call, and the `Amount` and `Min. received` lines of a
 decoded swap (see TxApproval below), do not always read as a number. They can
@@ -953,16 +969,25 @@ read:
 - `Unlimited`: on the ERC-20 `Amount` line, an `approve` of the `uint256`
  maximum, an unbounded allowance. On the swap's `Amount` line, any amount at or
  above the `uint160` maximum, whichever step set the line: a `PERMIT2_PERMIT`
-  amount at that maximum, which is an unbounded permit, or a V2 or V3 exact-in
-  or `WRAP_ETH` amount that large, which is not an allowance. The router's
-  whole-balance value, `CONTRACT_BALANCE` (`2^255`), is one such amount.
+  amount at that maximum, which is an unbounded permit, or a V2 or V3 exact-in,
+  V2 exact-out or `WRAP_ETH` amount that large, which is not an allowance. The
+  router's whole-balance value, `CONTRACT_BALANCE` (`2^255`), is one such
+  amount.
+- `Up to <amount>`: the swap's `Amount` line, when the transaction has a V2
+  exact-out step, whichever step set the line, including the `WRAP_ETH` of a
+  swap paid in ETH and a `PERMIT2_PERMIT`. The swap spends at most that figure,
+  not necessarily all of it; the wait, success and error screens show it with
+  the same words. `Unlimited` and `All available (V4 open delta)` keep their
+  wording. When a V2 exact-out step sets `Min. received`, that line shows its
+  `amountOut`, the exact amount it buys.
 - `All available (V4 open delta)`: the swap's `Amount` line, when the amount it
  shows is a V4 exact-in `amountIn` of zero. V4 reads that zero as "use the
  whole open delta", so the calldata states no quantity. The line shows the
  amount of one step that names an input token or amount: the last
  `PERMIT2_PERMIT` step if there is one, otherwise the first V2 or V3 exact-in,
-  `WRAP_ETH` or V4 swap step, a V4 swap step giving the `amountIn` of its first
-  readable exact-in action.
+  V2 exact-out, `WRAP_ETH` or V4 swap step. A V2 exact-out step gives its
+  `amountInMax`, and a V4 swap step the `amountIn` of its first readable
+  exact-in action.
 - `None (no minimum guaranteed)`: the swap's `Min. received` line, when the
  minimum it shows is zero, whether a V2, V3 or V4 swap's minimum or a
  `BALANCE_CHECK_ERC20` step's `minBalance`. Before
@@ -971,9 +996,14 @@ read:

 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
-that side. The token permission warning on the signature screen has its own
-amount wording, including `Unknown`; the SignApproval section below describes
-it.
+that side. An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side
+is WETH, on mainnet or Sepolia, or when no step set the output side; a WETH
+`Min. received` figure then reads in ETH. Otherwise `Token Out` and
+`Min. received` keep the output side's own token and figure, whether the swap
+was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
+unwraps the WETH it did not spend shows USDC. The token permission warning on
+the signature screen has its own amount wording, including `Unknown`; the
+SignApproval section below describes it.

 #### Partial USD totals

@@ -1055,8 +1085,13 @@ list from any other contract address is always dropped, and so is any token
 claiming a symbol that belongs to the native asset and therefore has no
 legitimate contract at all (`"ETH"`). That filter is unconditional — the "Hide
 tokens with fewer than 1,000 holders" setting governs the transaction history
-and the send-screen token selector, not this list. Tracked tokens with a zero
-balance are listed as well while "Show tracked tokens with zero balance" is on.
+and the send-screen token selector, not this list. `fetchTokenBalances()` stores
+every nonzero holding of a token it admits, however small, but a holding below
+0.000001 is left out of the balance lists, the send-screen token selector, the
+address total and the remove-address warning (`isBelowOneMillionth()` in
+`src/shared/amountDisplay.js`). The Send and confirmation screens show it when
+its token is the one being sent. Tracked tokens with a zero balance are listed
+as well while "Show tracked tokens with zero balance" is on.

 #### Stored state and its version

@@ -1244,7 +1279,10 @@ view would leave a wallet one click from deletion.
      of every wallet, deduplicated by hash and filtered. Each row is three
      lines: age and direction, then the counterparty's colour dot (with our own
      name for it, where it is one of our addresses) and the amount, then the
-      counterparty's full address on a row of its own
+      counterparty's full address on a row of its own. A contract creation has
+      no counterparty: its second line is the amount alone and its third line
+      says "This transaction creates a new contract. It has no recipient." The
+      transaction lists on AddressDetail and AddressToken draw the same rows
    - "Add additional wallet..." link at bottom
 - **Transitions**:
    - Tap address row → sets the active address and broadcasts
@@ -1378,7 +1416,9 @@ view would leave a wallet one click from deletion.
    - What to send: token dropdown (or static display with contract address when
      locked from AddressToken)
    - To: address or ENS name input, with an inline validation message
-    - Amount input with current balance display
+    - Amount input with current balance display, which reads
+      `Current balance: unknown (SYMBOL)` for a token whose scale is unknown, as
+      ConfirmTx's balance line does (see Unknown token scale)
    - "Review" button, disabled until the recipient validates
 - **Transitions**:
    - "Review" (valid inputs, ENS resolved) → **ConfirmTx**
@@ -1396,7 +1436,8 @@ view would leave a wallet one click from deletion.
    - From: blockie + color dot + full address + etherscan link + wallet title
    - To: blockie + color dot + full address + etherscan link + ENS name
    - Amount: value + symbol (USD in parentheses)
-    - Your balance: value + symbol (USD in parentheses)
+    - Your balance: value + symbol (USD in parentheses), or `unknown (SYMBOL)`
+      for a token whose scale is unknown
    - Network fee: "Estimating..." then two lines, or "Unable to estimate",
      fetched async. The first line is what the transfer is expected to cost,
      `gasLimit * gasPrice` (USD in parentheses); the second is the
@@ -1412,7 +1453,11 @@ view would leave a wallet one click from deletion.
      amount plus the fee exceeds the balance (ETH transfers), not enough ETH to
      pay the fee for the transfer (ERC-20 transfers), and the fee could not be
      estimated. The first two are mutually exclusive per transfer type, so only
-      the applicable one holds space
+      the applicable one holds space. The last names its cause: for a token
+      whose scale is unknown the fee can never be estimated, and it says the
+      wallet does not know how many decimal places the token uses and that the
+      transaction cannot be sent; for any other failure it asks the user to go
+      back and try again
    - Password: an inline field on this screen, not a modal, with its own error
      line
    - "Sign & Send" button (disabled if errors, and while the network fee
@@ -1437,7 +1482,9 @@ view would leave a wallet one click from deletion.
 - **Elements**:
    - "Transaction Broadcast" heading (no back button — tx is irreversible)
    - Amount + symbol
-    - To: color dot + full address + etherscan link
+    - To: color dot + full address + etherscan link; for a contract creation,
+      which has no recipient, "This transaction creates a new contract. It has
+      no recipient." instead
    - Transaction hash: full hash (tap to copy) + etherscan link
    - Count-up timer: "Waiting for confirmation... Ns"
 - **Behavior**: Polls `getTransactionReceipt` every 10 seconds. The wait is
@@ -1466,7 +1513,8 @@ view would leave a wallet one click from deletion.
    - Decoded action well (shown when the transaction carried recognized
      calldata; the top-level Amount and To are hidden in that case)
    - Amount + symbol
-    - To: color dot + full address + etherscan link
+    - To: color dot + full address + etherscan link, or for a contract creation
+      the same sentence as on WaitTx
    - Block number
    - Transaction hash: full hash (tap to copy) + etherscan link
    - "Done" button
@@ -1481,7 +1529,8 @@ view would leave a wallet one click from deletion.
 - **Elements**:
    - "Transaction Failed" heading
    - Amount + symbol
-    - To: color dot + full address + etherscan link
+    - To: color dot + full address + etherscan link, or for a contract creation
+      the same sentence as on WaitTx
    - Error message (dashed border box)
    - Transaction hash section (hidden if broadcast failed before getting hash):
      full hash (tap to copy) + etherscan link
@@ -1519,7 +1568,7 @@ view would leave a wallet one click from deletion.
    - From: blockie + color dot + full address (tap to copy) + etherscan link;
      ENS name if available
    - To: blockie + color dot + full address (tap to copy) + etherscan link; ENS
-      name if available
+      name if available. For a contract creation, the same sentence as on WaitTx
    - Time: ISO datetime + relative age in parentheses
    - Block: block number (tap to copy) + etherscan block link
    - Amount: value + symbol (bold)
@@ -1582,8 +1631,14 @@ view would leave a wallet one click from deletion.
          a value carrying its unit, hex (`0x10`) or exponent (`1e3`) notation —
          is refused with a flash message and the field snaps back to the stored
          threshold, so a number the user did not type is never stored.
-    - Allowed Sites: list with remove buttons
-    - Denied Sites: list with remove buttons
+    - Allowed Sites: the hostnames remembered as allowed, under any address,
+      with remove buttons
+    - Connected Sites: the hostnames of the sites allowed without "Remember my
+      choice" that are still connected, with remove buttons. Only the background
+      holds these, in memory, and Settings asks it for them with
+      `AUTISTMASK_GET_CONNECTED_SITES`
+    - Denied Sites: the hostnames remembered as denied, under any address, with
+      remove buttons
    - About: project link, license, author, version, release date, and the
      commit, which links to the commit in the repository
    - Debug: hidden until revealed, then an "Enable debug mode" checkbox that
@@ -1594,8 +1649,15 @@ view would leave a wallet one click from deletion.
    - `[recovery phrase]` on an HD wallet → **ShowRecoveryPhrase**
    - `[x]` on a wallet → **DeleteWallet**
    - Tap wallet name → inline rename field (no screen change)
-    - `[x]` on a tracked token or a site → removes it in place (no screen
-      change)
+    - `[x]` on a tracked token → removes it in place (no screen change)
+    - `[x]` on an allowed or connected site → disconnects that site, in place:
+      its hostname is dropped from Allowed Sites under every address, and
+      `AUTISTMASK_REMOVE_SITE` has the background end every connection approved
+      without "Remember" from an origin with that hostname, under any address,
+      and send `accountsChanged` with an empty list to the site's open tabs.
+      Only the extension's own pages may send either message
+    - `[x]` on a denied site → forgets the refusal, in place; it connects
+      nothing and tells the background nothing
    - Ten clicks on the version → reveals the Debug well (no screen change)
    - "Back" (or Settings gear again) → previous screen (Home)

@@ -1646,6 +1708,10 @@ view would leave a wallet one click from deletion.
    - Either way, the active address moves only if it belonged to the deleted
      wallet, and `AUTISTMASK_ACTIVE_CHANGED` is broadcast when it does
      (`src/shared/walletDelete.js`)
+    - Either way, every address the wallet held loses its site permissions of
+      both kinds: the remembered ones in storage, and the connections approved
+      without "Remember", which only the background holds, in memory, and drops
+      on `AUTISTMASK_ADDRESSES_REMOVED`
    - "Confirm Delete" (wrong password) → "That password is incorrect. Please
      try again." on the error line, nothing deleted
    - "I have lost my password" → **DeleteWalletLostPassword**
@@ -1742,6 +1808,10 @@ view would leave a wallet one click from deletion.
  so a connected site stops being told about an address the user removed
  (`src/shared/walletDelete.js`). A selection in any other wallet is left alone;
  one in this wallet follows the splice.
+- The address loses its site permissions of both kinds, whether or not it was
+  the active one: the remembered ones in storage, and any connection approved
+  without "Remember", which only the background holds, in memory, and drops on
+  `AUTISTMASK_ADDRESSES_REMOVED`.
 - The wallet's derivation counter (`nextIndex`) is not rewound, so "+" derives a
  fresh address rather than handing back the one just removed.

@@ -1782,7 +1852,8 @@ view would leave a wallet one click from deletion.
 - **Transitions**:
    - "Allow" / "Deny" → closes popup (returns result to background script; the
      choice is persisted to the allowed or denied list when "Remember" is
-      checked)
+      checked, and an "Allow" without it is listed under Connected Sites in
+      **Settings**)
    - Popup closed without answering → treated as a denial

 #### TxApproval (`approve-tx`)
@@ -1808,8 +1879,8 @@ view would leave a wallet one click from deletion.
    - Decoded action (if calldata is recognized): action name, token details,
      amounts, steps, deadline (see Transaction Decoding)
    - From: color dot + full address + etherscan link
-    - Contract: color dot + full address + etherscan link (or "contract
-      creation"), token symbol label if known
+    - Contract: color dot + full address + etherscan link, token symbol label if
+      known; for a contract creation, the same sentence as on WaitTx
    - Value: amount in ETH (4 decimal places, USD in parentheses)
    - Network fee (max): gas limit × fee per gas in ETH (4 decimal places, USD
      in parentheses), with the gas limit and the fee per gas in gwei below it
@@ -45,6 +45,123 @@ but the review is broader than any of them.

 # Completed Steps

+- 2026-10-04: A token whose scale is unknown reads the same on the Send screen
+  as on the confirmation screen
+  ([#377](https://git.eeqj.de/sneak/AutistMask/issues/377)). When two addresses'
+  explorer reports disagree on a token's `decimals`, the Send screen showed the
+  stored figure while the confirmation screen it leads to said
+  `unknown (SYMBOL)`; both now say `unknown (SYMBOL)`, from one function in
+  `src/popup/views/send.js`. The confirmation screen's fee-unknown message names
+  its cause: for an unknown scale it says the wallet does not know how many
+  decimal places the token uses and that the transaction cannot be sent, instead
+  of asking the user to go back and try again, which cannot help. For any other
+  cause it is unchanged.
+
+- 2026-10-04: A Uniswap V2 exact-out swap (Universal Router command `0x09`) is
+  decoded on the approval screen
+  ([#283](https://git.eeqj.de/sneak/AutistMask/issues/283)). `decode()` in
+  `src/shared/uniswap.js` had no arm for it, so the screen named the step and
+  showed no token or amount. The input side is the path's first token with
+  `amountInMax`, the output side the last token with `amountOut`. When the
+  transaction has such a step, the `Amount` figure reads `Up to <amount>`,
+  whichever step set it, there and on the wait, success and error screens,
+  except where it reads `Unlimited` (an unbounded `PERMIT2_PERMIT`, or any
+  amount at or above the `uint160` maximum) or `All available (V4 open delta)`.
+  In every swap, `UNWRAP_WETH` makes `Token Out` ETH only when the output side
+  is WETH, on mainnet or Sepolia, or when no step set the output side; otherwise
+  `Token Out` and `Min. received` keep the output side's own token and figure.
+  V3 exact-out (`0x01`) is still not decoded.
+
+- 2026-10-04: `make test` runs jest in three worker processes
+  ([#426](https://git.eeqj.de/sneak/AutistMask/issues/426)). The `test` and
+  `test:verbose` scripts in `package.json` ran `jest --forceExit`, which starts
+  one worker per CPU core: about 47 processes and 7-8 GiB per run on the shared
+  48-core build host. They now pass `--maxWorkers=3`, and the suite takes 23-29s
+  there: inside the 30-second cap in `script/test`, which is unchanged, but not
+  by much, because `tests/persistedFieldContract.test.js` alone takes most of it
+  ([#428](https://git.eeqj.de/sneak/AutistMask/issues/428)). One or two workers
+  went past the cap. `make check`, the pre-commit hook and `script/cibuild` all
+  run the suite through these scripts.
+
+- 2026-10-04: The error container on each dApp approval screen keeps its height
+  when an error appears
+  ([#297](https://git.eeqj.de/sneak/AutistMask/issues/297)). `#approve-tx-error`
+  and `#approve-sign-error` reserved 20px, but their border and padding took
+  10px of it, so a one-line error grew them to 26px and pushed the buttons below
+  down 6px. They now reserve 30px. A new test in `tests/e2e/run.js` shows each
+  of the six password error containers on its own screen, empty and then with an
+  error, and fails if one changes height or the element below it moves. Some of
+  the longer messages these two containers can show still take two lines.
+
+- 2026-10-04: A transaction with no `to` says "This transaction creates a new
+  contract. It has no recipient." on its recipient line and in its transaction
+  history row ([#250](https://git.eeqj.de/sneak/AutistMask/issues/250)). The
+  wait, success and error screens, the transaction detail view and the history
+  rows on Home, AddressDetail and AddressToken showed a blank address there,
+  with a colour dot whose colour was `undefined`; the approval screen showed
+  "(contract creation)". A transaction with a real `to` is unchanged.
+
+- 2026-10-04: The Send and confirmation screens no longer show an ETH balance, a
+  token balance or a network fee below 0.000001 as zero
+  ([#343](https://git.eeqj.de/sneak/AutistMask/issues/343)). The stored balances
+  (`src/shared/balances.js`) and the confirmation screen's fee were each cut to
+  six decimal places by a rule of their own, and a token holding cut to zero was
+  dropped. Balances are now stored exactly, whatever decimals a token declares,
+  and every nonzero token holding is kept; the balance check reads a token
+  balance to its first 18 places, the most an amount can have. The balance
+  lists, the send-screen token selector, the address total and the
+  remove-address warning leave out a holding below 0.000001 themselves, as
+  before. The Send screen's `Current balance`, and the confirmation screen's
+  balance, fee, reserve and insufficient-balance messages, go through
+  `truncateAmountNeverZero()` in `src/shared/amountDisplay.js`, the helper the
+  approval screen already used. The confirmation and approval screens both
+  render the fee through `formatFee()` in `src/popup/views/helpers.js`, which
+  prices the exact fee in USD, so the same fee reads the same on both, USD value
+  included.
+
+- 2026-10-04: The flash line keeps to the one line it reserves at any message
+  length ([#252](https://git.eeqj.de/sneak/AutistMask/issues/252)). A message
+  that wrapped pushed the whole screen below it down. `#flash-msg` no longer
+  wraps: text too long for the line is cut with an ellipsis, and `showFlash()`
+  puts the whole message in the line's title. Every message is also reworded to
+  at most 50 characters so none is cut; none carries a wallet name or text from
+  a server, and the add-token screens flash a fixed line for any error other
+  than a contract that is not a token. A new test in `tests/e2e/run.js` puts a
+  message several lines long on the line and fails if the line or the screen
+  below it moves. The two approval-screen error boxes are left to
+  [#297](https://git.eeqj.de/sneak/AutistMask/issues/297).
+
+- 2026-10-04: A method the wallet does not implement is refused with EIP-1193
+  code `4200` ([#279](https://git.eeqj.de/sneak/AutistMask/issues/279)). The
+  background's `Unsupported method: <method>` error carried no code, so a site
+  probing for an optional method could not tell "not implemented" from "the call
+  failed". The message is unchanged; the background's other errors with no code
+  are untouched.
+
+- 2026-10-04: Settings lists the sites connected without "Remember", and
+  removing a site there disconnects it
+  ([#406](https://git.eeqj.de/sneak/AutistMask/issues/406)). Such a connection
+  lives only in the background's in-memory `connectedSites` map, so Settings
+  never showed it and the user could not end it; `AUTISTMASK_REMOVE_SITE`, sent
+  on every remove, did nothing. Settings now asks the background for those sites
+  (`AUTISTMASK_GET_CONNECTED_SITES`) and lists them under Connected Sites.
+  Removing a site from Allowed Sites or Connected Sites drops its remembered
+  entry under every address and sends `AUTISTMASK_REMOVE_SITE` with the
+  hostname; the background deletes every `connectedSites` entry for that
+  hostname and sends `accountsChanged` with an empty list to its open tabs. Only
+  the extension's own pages may send either message. Removing a denied site no
+  longer sends it, since forgetting a refusal ends no connection.
+- 2026-10-04: Removing an address or deleting a wallet ends every site
+  connection approved without "Remember" for the addresses removed
+  ([#245](https://git.eeqj.de/sneak/AutistMask/issues/245)). Such a connection
+  lives only in the background's in-memory `connectedSites` map. Both removal
+  paths dropped the remembered `allowedSites`/`deniedSites` entries, but nothing
+  told the background, so its entry was cleared only as a side effect: every
+  change of active address empties the whole map, and removing the active
+  address changes it. `dropSitePermissions()` in `src/shared/walletDelete.js`,
+  shared by both paths, now also sends `AUTISTMASK_ADDRESSES_REMOVED` with the
+  removed addresses, and the background deletes their `connectedSites` entries;
+  only the extension's own pages may send it.
 - 2026-10-03: The typed-data signing screen warns for a token permission, and
  names the primary type ethers signs
  ([#400](https://git.eeqj.de/sneak/AutistMask/issues/400)). A Permit or Permit2
@@ -6,8 +6,8 @@
    "license": "GPL-3.0",
    "private": true,
    "scripts": {
-        "test": "jest --forceExit",
-        "test:verbose": "jest --forceExit --verbose",
+        "test": "jest --forceExit --maxWorkers=3",
+        "test:verbose": "jest --forceExit --maxWorkers=3 --verbose",
        "build": "node build.js",
        "lint": "eslint . && prettier --check .",
        "fmt": "prettier --write .",
@@ -1,13 +1,16 @@
 #!/bin/sh
 # script/test: run the test suite.
 #
-# The timeout bounds a hung suite; it is not a performance budget. On a
-# developer host the suite finishes in about 8s and REPO_POLICIES' 30s cap is
-# the bound. Inside the image the same suite also pays a cold jest cache and
-# shares the runner with the rest of the build, which is not what that budget
-# describes, so the Dockerfile raises the bound through
-# AUTISTMASK_TEST_TIMEOUT. A cap a healthy suite can trip on a cold cache
-# produces a red that means nothing, and teaches "just run it again".
+# jest runs three worker processes (package.json), not one per CPU core: on a
+# many-core shared host one per core took gigabytes of RAM per run.
+#
+# The timeout bounds a hung suite; it is not a performance budget. On the busy
+# shared build host the suite takes 23-29s with three workers, so
+# REPO_POLICIES' 30s cap is tight there, not comfortable. Inside the image the
+# same suite also pays a cold jest cache and shares the runner with the rest of
+# the build, which is not what that budget describes, so the Dockerfile raises
+# the bound through AUTISTMASK_TEST_TIMEOUT. A cap a healthy suite can trip on a
+# cold cache produces a red that means nothing, and teaches "just run it again".
 set -eu

 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
@@ -932,7 +932,9 @@ async function handleRpc(method, params, origin) {
        }
    }

-    return { error: { message: "Unsupported method: " + method } };
+    // EIP-1193 4200 lets a site tell "this wallet does not implement that"
+    // from "that call failed", and fall back.
+    return { error: { code: 4200, message: "Unsupported method: " + method } };
 }

 // The body of eth_sendTransaction, from the connection check through to the
@@ -1110,6 +1112,24 @@ async function broadcastAccountsChanged() {
    }
 }

+// Tell every open tab of a site Settings removed that it has no account.
+async function broadcastSiteRemoved(hostname) {
+    let tabs;
+    try {
+        tabs = await tabsQuery({});
+    } catch {
+        return;
+    }
+    for (const tab of tabs) {
+        if (!tab.url || extractHostname(tab.url) !== hostname) continue;
+        tabsSendMessage(tab.id, {
+            type: "AUTISTMASK_EVENT",
+            eventName: "accountsChanged",
+            data: [],
+        }).catch(() => {});
+    }
+}
+
 // Background balance refresh: every 60 seconds when the popup isn't open.
 // When the popup IS open, its 10-second interval keeps lastBalanceRefresh
 // fresh, so this naturally skips.
@@ -1305,6 +1325,9 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
        "AUTISTMASK_GET_APPROVAL",
        "AUTISTMASK_TX_RESPONSE",
        "AUTISTMASK_SIGN_RESPONSE",
+        "AUTISTMASK_ADDRESSES_REMOVED",
+        "AUTISTMASK_GET_CONNECTED_SITES",
+        "AUTISTMASK_REMOVE_SITE",
    ];
    if (POPUP_ONLY_TYPES.includes(msg.type) && !isExtensionSender(sender)) {
        sendResponse({ error: "Unauthorized sender" });
@@ -1647,8 +1670,42 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
        return false;
    }

+    // The popup removed these addresses, so no site stays connected to them.
+    // A connectedSites key is origin + ":" + address, and an origin can carry
+    // a port, so the address is what follows the last colon.
+    if (msg.type === "AUTISTMASK_ADDRESSES_REMOVED") {
+        const removed = Array.isArray(msg.addresses) ? msg.addresses : [];
+        for (const key of Object.keys(connectedSites)) {
+            const address = key.slice(key.lastIndexOf(":") + 1);
+            if (removed.some((a) => sameAddress(a, address))) {
+                delete connectedSites[key];
+            }
+        }
+        return false;
+    }
+
+    // Settings lists the sites connected without "Remember", which only this
+    // worker knows. The origin is what precedes the key's last colon.
+    if (msg.type === "AUTISTMASK_GET_CONNECTED_SITES") {
+        sendResponse(
+            Object.keys(connectedSites).map((key) =>
+                extractHostname(key.slice(0, key.lastIndexOf(":"))),
+            ),
+        );
+        return false;
+    }
+
+    // Settings removed this site and has already dropped its remembered
+    // entries. Its connections approved without "Remember" end here, under
+    // every address, and its open tabs are told it has no account.
    if (msg.type === "AUTISTMASK_REMOVE_SITE") {
-        // Popup already saved state; nothing else needed
+        for (const key of Object.keys(connectedSites)) {
+            const origin = key.slice(0, key.lastIndexOf(":"));
+            if (extractHostname(origin) === msg.hostname) {
+                delete connectedSites[key];
+            }
+        }
+        broadcastSiteRemoved(msg.hostname);
        return false;
    }
 });
@@ -31,11 +31,12 @@
    // an error instead of accepting the refusal.
    //
    // Whatever code arrived is passed through verbatim rather than being
-    // matched against a list: the extension emits 4001, 4100 and 4902 today,
-    // and a code this file has never heard of is still the truth about what
-    // happened. An error reported with no code at all stays a plain Error —
-    // a ProviderRpcError whose `code` is undefined would advertise a
-    // conformance it does not have. `message` is untouched in every case.
+    // matched against a list: the extension emits codes such as 4001, 4100,
+    // 4200 and 4902, and a code this file has never heard of is still the
+    // truth about what happened. An error reported with no code at all stays
+    // a plain Error — a ProviderRpcError whose `code` is undefined would
+    // advertise a conformance it does not have. `message` is untouched in
+    // every case.
    function toPageError(error) {
        const message = (error && error.message) || "Request failed";
        if (error && error.code !== undefined && error.code !== null) {
@@ -19,13 +19,9 @@
 // that the user did not type — the same silent substitution the visible
 // rejection message exists to end.

-// Must render on ONE line of #flash-msg, whose reserved height
-// (min-h-[1.25rem]) is exactly one line at text-xs. A string long enough to
-// wrap to two lines pushes the settings view down, which the No Layout Shift
-// policy forbids. Do not lengthen this without re-running the layout test in
-// tests/e2e/run.js, which measures the flash line and goes red on a shift.
-const DUST_THRESHOLD_MESSAGE =
-    "Please enter a whole number of gwei, zero or greater.";
+// Must render on ONE line of #flash-msg; see showFlash() in
+// src/popup/views/helpers.js for how long that is.
+const DUST_THRESHOLD_MESSAGE = "Enter a whole number of gwei, zero or greater.";

 // Returns the threshold in gwei, or null if the input is not one.
 function parseDustThresholdGwei(raw) {
@@ -33,7 +33,7 @@
            <!-- ============ FLASH MESSAGE AREA ============ -->
            <div
                id="flash-msg"
-                class="text-xs text-muted min-h-[1.25rem] mb-1"
+                class="text-xs text-muted min-h-[1.25rem] mb-1 truncate"
            ></div>

            <!-- ============ WELCOME / FIRST USE ============ -->
@@ -698,15 +698,13 @@
                    You do not have enough ETH to pay the network fee for this
                    transfer. Please add ETH to this address and try again.
                </div>
+                <!-- Its sentence names why the fee could not be estimated,
+                so show() in confirmTx.js sets it. -->
                <div
                    id="confirm-fee-unknown-error"
                    class="mb-2 border border-border border-dashed p-2 text-xs"
                    style="visibility: hidden"
-                >
-                    The network fee could not be estimated, so this transaction
-                    cannot be checked against your balance. Please go back and
-                    try again.
-                </div>
+                ></div>
                <div class="mb-2">
                    <label class="block mb-1 text-xs">Password</label>
                    <input
@@ -1064,6 +1062,15 @@
                    <div id="settings-allowed-sites"></div>
                </div>

+                <div class="bg-well p-3 mx-1 mb-3">
+                    <h3 class="font-bold mb-1">Connected Sites</h3>
+                    <p class="text-xs text-muted mb-2">
+                        Sites you allowed without "Remember my choice".
+                        Switching address disconnects them.
+                    </p>
+                    <div id="settings-connected-sites"></div>
+                </div>
+
                <div class="bg-well p-3 mx-1 mb-3">
                    <h3 class="font-bold mb-1">Denied Sites</h3>
                    <p class="text-xs text-muted mb-2">
@@ -1624,7 +1631,7 @@
                </div>
                <div
                    id="approve-tx-error"
-                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.25rem]"
+                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem]"
                    style="visibility: hidden"
                ></div>
                <div class="flex justify-between">
@@ -1701,7 +1708,7 @@
                </div>
                <div
                    id="approve-sign-error"
-                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.25rem]"
+                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem]"
                    style="visibility: hidden"
                ></div>
                <div class="flex justify-between">
@@ -28,9 +28,7 @@ function init(ctx) {
    $("btn-add-token-confirm").addEventListener("click", async () => {
        const contractAddr = $("add-token-address").value.trim();
        if (!contractAddr || !contractAddr.startsWith("0x")) {
-            showFlash(
-                "Please enter a valid contract address starting with 0x.",
-            );
+            showFlash("Enter a valid contract address starting with 0x.");
            return;
        }
        const already = state.trackedTokens.find(
@@ -71,8 +69,15 @@ function init(ctx) {
            require("./addressDetail").show();
        } catch (e) {
            const detail = e.shortMessage || e.message || String(e);
-            log.errorf("Token lookup failed for", contractAddr, detail);
-            showFlash(detail);
+            log.errorf("Adding token failed for", contractAddr, detail);
+            // lookupTokenInfo() rejects a contract with a one-line message
+            // starting "Not a valid ERC-20 token". Any other error, such as a
+            // failed save, can be far longer, so it is only logged.
+            showFlash(
+                detail.startsWith("Not a valid ERC-20 token")
+                    ? detail
+                    : "Could not add the token.",
+            );
            infoEl.textContent = "";
            infoEl.style.visibility = "hidden";
        }
@@ -142,15 +142,13 @@ function validatePassword() {
 async function importMnemonic(ctx) {
    const mnemonic = $("wallet-mnemonic").value.trim();
    if (!mnemonic) {
-        showFlash("Enter a recovery phrase or press the die to generate one.");
+        showFlash("Enter a recovery phrase, or press the die.");
        return;
    }
    const words = mnemonic.split(/\s+/);
    if (words.length !== 12 && words.length !== 24) {
        showFlash(
-            "Recovery phrase must be 12 or 24 words. You entered " +
-                words.length +
-                ".",
+            "Recovery phrase must be 12 or 24 words, not " + words.length + ".",
        );
        return;
    }
@@ -163,14 +161,12 @@ async function importMnemonic(ctx) {
    const { xpub, firstAddress } = hdWalletFromMnemonic(mnemonic);
    const xpubDup = findWalletByXpub(xpub);
    if (xpubDup) {
-        showFlash(
-            "This recovery phrase is already added (" + xpubDup.name + ").",
-        );
+        showFlash("This recovery phrase is already added.");
        return;
    }
    const addrDup = findWalletByAddress(firstAddress);
    if (addrDup) {
-        showFlash("Address already exists in wallet (" + addrDup.name + ").");
+        showFlash("Address already exists in a wallet.");
        return;
    }
    const encrypted = await encryptWithPassword(mnemonic, pw);
@@ -229,9 +225,7 @@ async function importPrivateKey(ctx) {
    if (!pw) return;
    const duplicate = findWalletByAddress(addr);
    if (duplicate) {
-        showFlash(
-            "This address already exists in wallet (" + duplicate.name + ").",
-        );
+        showFlash("This address already exists in a wallet.");
        return;
    }
    const encrypted = await encryptWithPassword(key, pw);
@@ -258,36 +252,29 @@ async function importXprvKey(ctx) {
        return;
    }
    if (!isValidXprv(xprv)) {
-        showFlash(
-            "That extended private key is not valid. Please check it and try again.",
-        );
+        showFlash("That extended private key is not valid.");
        return;
    }
    if (!isMasterExtendedKey(xprv)) {
-        showFlash(
-            "That is an account-level or child key, which cannot be imported. " +
-                "Please paste the master extended private key for the wallet.",
-        );
+        showFlash("Please paste the master key, not a child key.");
        return;
    }
    let result;
    try {
        result = hdWalletFromXprv(xprv);
    } catch {
-        showFlash(
-            "That extended private key is not valid. Please check it and try again.",
-        );
+        showFlash("That extended private key is not valid.");
        return;
    }
    const { xpub, firstAddress } = result;
    const xpubDup = findWalletByXpub(xpub);
    if (xpubDup) {
-        showFlash("This key is already added (" + xpubDup.name + ").");
+        showFlash("This key is already added.");
        return;
    }
    const addrDup = findWalletByAddress(firstAddress);
    if (addrDup) {
-        showFlash("Address already exists in wallet (" + addrDup.name + ").");
+        showFlash("Address already exists in a wallet.");
        return;
    }
    const pw = validatePassword();
@@ -3,7 +3,7 @@ const {
    showView,
    showFlash,
    balanceLinesForAddress,
-    addressDotHtml,
+    txCounterpartyHtml,
    addressTitle,
    escapeHtml,
    displaySymbol,
@@ -233,16 +233,13 @@ function renderTransactions(txs) {
        // is shown whole; the title or ENS name, where there is one, names
        // it on the line above rather than replacing it.
        const nameStr = escapeHtml(title || ensName || "");
-        const addrStr = escapeHtml(counterparty);
-        const dot = addressDotHtml(counterparty);
        const err = tx.isError ? " (failed)" : "";
        const opacity = tx.isError ? " opacity:0.5;" : "";
        const ago = escapeHtml(timeAgo(tx.timestamp));
        const iso = escapeHtml(isoDate(tx.timestamp));
        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
        html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
-        html += `<div class="flex justify-between"><span class="flex items-center">${dot}${nameStr}</span><span>${amountStr}</span></div>`;
-        html += `<div class="am-address">${addrStr}</div>`;
+        html += txCounterpartyHtml(counterparty, nameStr, amountStr);
        html += `</div>`;
        i++;
    }
@@ -6,7 +6,7 @@ const {
    showView,
    showFlash,
    flashCopyFeedback,
-    addressDotHtml,
+    txCounterpartyHtml,
    addressTitle,
    escapeHtml,
    displaySymbol,
@@ -309,16 +309,13 @@ function renderTransactions(txs) {
        // is shown whole; the title or ENS name, where there is one, names
        // it on the line above rather than replacing it.
        const nameStr = escapeHtml(title || ensName || "");
-        const addrStr = escapeHtml(counterparty);
-        const dot = addressDotHtml(counterparty);
        const err = tx.isError ? " (failed)" : "";
        const opacity = tx.isError ? " opacity:0.5;" : "";
        const ago = escapeHtml(timeAgo(tx.timestamp));
        const iso = escapeHtml(isoDate(tx.timestamp));
        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
        html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
-        html += `<div class="flex justify-between"><span class="flex items-center">${dot}${nameStr}</span><span>${amountStr}</span></div>`;
-        html += `<div class="am-address">${addrStr}</div>`;
+        html += txCounterpartyHtml(counterparty, nameStr, amountStr);
        html += `</div>`;
        i++;
    }
@@ -1,6 +1,7 @@
 const {
    $,
    addressTitle,
+    CONTRACT_CREATION_TEXT,
    escapeHtml,
    showView,
    showError,
@@ -8,6 +9,7 @@ const {
    renderAddressHtml,
    attachCopyHandlers,
    onViewLeave,
+    formatFee,
 } = require("./helpers");
 const { state, saveState } = require("../../shared/state");
 const { networkByChainId } = require("../../shared/networks");
@@ -207,7 +209,7 @@ function showPhishingWarning(elementId, isPhishing) {
 // and the nonce. The background compares every one of them against the signed
 // artifact, so every one of them has to be on the screen — a number that is
 // verified but never displayed is verified against nothing the user agreed to.
-function showTxFee(approvedTx, ethPrice) {
+function showTxFee(approvedTx) {
    const network = networkByChainId(approvedTx.chainId);
    $("approve-tx-network").textContent = network
        ? network.name
@@ -215,12 +217,9 @@ function showTxFee(approvedTx, ethPrice) {

    const gasLimit = BigInt(approvedTx.gasLimit);
    const feePerGas = BigInt(approvedTx.maxFeePerGas || approvedTx.gasPrice);
-    const maxFeeEth = formatTxValue(formatEther(gasLimit * feePerGas));
-    const usdStr = formatUsd(
-        ethPrice ? parseFloat(maxFeeEth) * ethPrice : null,
-    );
-    $("approve-tx-fee").textContent =
-        maxFeeEth + " ETH" + (usdStr ? " (" + usdStr + ")" : "");
+    // Through formatFee(), as the confirmation screen's fee is, so the same
+    // fee reads the same on both.
+    $("approve-tx-fee").textContent = formatFee(gasLimit * feePerGas);

    let detail =
        gasLimit.toString() +
@@ -320,7 +319,7 @@ function showTxApproval(details) {
        toHtml += approvalAddressHtml(toAddr);
        $("approve-tx-to").innerHTML = toHtml;
    } else {
-        $("approve-tx-to").innerHTML = escapeHtml("(contract creation)");
+        $("approve-tx-to").innerHTML = escapeHtml(CONTRACT_CREATION_TEXT);
    }

    const ethValueFormatted = formatTxValue(
@@ -332,7 +331,7 @@ function showTxApproval(details) {
    $("approve-tx-value").textContent =
        ethValueFormatted + " ETH" + (usdStr ? " (" + usdStr + ")" : "");

-    showTxFee(approvedTx, ethPrice);
+    showTxFee(approvedTx);

    // Decode calldata (reuse decoded from above)
    const decodedEl = $("approve-tx-decoded");
@@ -15,6 +15,7 @@ const {
    attachCopyHandlers,
    goBack,
    onViewLeave,
+    formatFee,
 } = require("./helpers");
 const { state } = require("../../shared/state");
 const { getSignerForAddress } = require("../../shared/wallet");
@@ -31,6 +32,9 @@ const {
    transferAmountUnits,
 } = require("../../shared/transferAmount");
 const { assertWithinCeilings } = require("../../shared/approvalVerify");
+// The balance lines, the fee reserve and the insufficient-balance messages go
+// through it, as the approval screen's amounts do.
+const { truncateAmountNeverZero } = require("../../shared/amountDisplay");
 const {
    CODES,
    FEE_PENDING,
@@ -150,11 +154,17 @@ function show(txInfo) {
        $("confirm-balance").textContent =
            bal == null
                ? "unknown (" + symbol + ")"
-                : valueWithUsd(bal + " " + symbol, balUsd);
+                : valueWithUsd(
+                      truncateAmountNeverZero(bal) + " " + symbol,
+                      balUsd,
+                  );
    } else {
        const bal = txInfo.balance || "0";
        const balUsd = ethPrice ? parseFloat(bal) * ethPrice : null;
-        $("confirm-balance").textContent = valueWithUsd(bal + " ETH", balUsd);
+        $("confirm-balance").textContent = valueWithUsd(
+            truncateAmountNeverZero(bal) + " ETH",
+            balUsd,
+        );
    }

    // Check for warnings (synchronous local checks)
@@ -188,6 +198,19 @@ function show(txInfo) {
    $("confirm-amount-fee-error").classList.toggle("hidden", isErc20);
    $("confirm-gas-error").classList.toggle("hidden", !isErc20);

+    // The fee-unknown message names its cause, which is also known here.
+    // Without the token's scale estimateGas() cannot encode the transfer, so
+    // the estimate fails every time and going back cannot help; any other
+    // failure may clear on a retry.
+    $("confirm-fee-unknown-error").textContent =
+        isErc20 && txInfo.tokenDecimals == null
+            ? "The network fee could not be estimated, because this wallet" +
+              " does not know how many decimal places this token uses, so" +
+              " this transaction cannot be sent."
+            : "The network fee could not be estimated, so this transaction" +
+              " cannot be checked against your balance. Please go back and" +
+              " try again.";
+
    renderValidation(txInfo);

    // Reset password field and error
@@ -234,7 +257,8 @@ function renderValidation(txInfo) {
    });

    // Messages carrying the user's own numbers are built here; the fixed
-    // sentences live in the reserved elements in index.html.
+    // sentences live in the reserved elements in index.html, except the
+    // fee-unknown one, which show() sets.
    const messages = [];
    if (codes.includes(CODES.AMOUNT_INVALID)) {
        messages.push("Please enter a valid amount to send.");
@@ -249,7 +273,7 @@ function renderValidation(txInfo) {
                : "Insufficient " +
                      symbol +
                      " balance. You have " +
-                      txInfo.tokenBalance +
+                      truncateAmountNeverZero(txInfo.tokenBalance) +
                      " " +
                      symbol +
                      " but are trying to send " +
@@ -262,7 +286,7 @@ function renderValidation(txInfo) {
    if (codes.includes(CODES.INSUFFICIENT_ETH)) {
        messages.push(
            "Insufficient balance. You have " +
-                txInfo.balance +
+                truncateAmountNeverZero(txInfo.balance || "0") +
                " ETH but are trying to send " +
                txInfo.amount +
                " ETH.",
@@ -305,14 +329,6 @@ function setVisible(id, visible) {
    $(id).style.visibility = visible ? "visible" : "hidden";
 }

-// A fee in wei as an ETH string, truncated to 6 decimal places.
-function formatFeeEth(wei) {
-    const parts = formatEther(wei).split(".");
-    const dec =
-        parts.length > 1 ? parts[1].slice(0, 6).replace(/0+$/, "") || "0" : "0";
-    return parts[0] + "." + dec + " ETH";
-}
-
 async function estimateGas(txInfo) {
    try {
        const provider = getProvider(state.rpcUrl, state.networkId);
@@ -359,26 +375,20 @@ async function estimateGas(txInfo) {
        // flight; a stale fee must not reach the screen or the balance check.
        if (pendingTx !== txInfo) return;

-        const ethPrice = getPrice("ETH");
-        const usd = (wei) =>
-            ethPrice ? parseFloat(formatEther(wei)) * ethPrice : null;
-
+        // The fee line goes through formatFee(), as the approval screen's
+        // does, so the same fee reads the same on both.
        if (estimateWei !== null && estimateWei < gasCostWei) {
-            $("confirm-fee-amount").textContent = valueWithUsd(
-                "~" + formatFeeEth(estimateWei),
-                usd(estimateWei),
-            );
+            $("confirm-fee-amount").textContent = "~" + formatFee(estimateWei);
            $("confirm-fee-reserve").textContent =
-                "up to " + formatFeeEth(gasCostWei) + " reserved";
+                "up to " +
+                truncateAmountNeverZero(formatEther(gasCostWei)) +
+                " ETH reserved";
            setVisible("confirm-fee-reserve", true);
        } else {
            // No spread to report: either there is no estimate, or the node
            // quotes a gas price at or above maxFeePerGas, so the expected
            // cost is not below the reserve. Show the reserve alone.
-            $("confirm-fee-amount").textContent = valueWithUsd(
-                formatFeeEth(gasCostWei),
-                usd(gasCostWei),
-            );
+            $("confirm-fee-amount").textContent = formatFee(gasCostWei);
            setVisible("confirm-fee-reserve", false);
        }
        feeStatus = FEE_KNOWN;
@@ -87,7 +87,8 @@ function recoveryPathText(wallet) {
 // AddressDetail, followed by the USD total when there is one to give — no
 // total line at all on testnet or before the first price fetch, and no figure
 // when every holding here is one with no price, since "$0.00" directly under
-// "This address holds a balance." is a contradiction.
+// "This address holds a balance." is a contradiction. A token holding below
+// 0.000001 does not count, as the lines below leave it out.
 function balanceWarningHtml(addr) {
    if (!addressHoldsFunds(addr)) return "&nbsp;";
    const line = formatAddressTotal(getAddressValue(addr));
@@ -12,6 +12,11 @@
 // escapeHtml lives in src/shared/html.js, where the escape and the
 // reasoning behind it are; it is re-exported below so views keep importing
 // it from here.
+const { formatEther } = require("ethers");
+const {
+    truncateAmountNeverZero,
+    isBelowOneMillionth,
+} = require("../../shared/amountDisplay");
 const { DEBUG } = require("../../shared/constants");
 const { escapeHtml } = require("../../shared/html");
 const { isDebug } = require("../../shared/log");
@@ -223,15 +228,19 @@ function clearFlash() {
        flashTimer = null;
    }
    $("flash-msg").textContent = "";
+    $("flash-msg").title = "";
 }

+// The flash line reserves exactly one line, and a message that wrapped would
+// push the screen below it down (README, No Layout Shift). So #flash-msg never
+// wraps: text too long for the line is cut with an ellipsis, and the whole
+// message is also put in the line's title. Write messages to fit, at most 50
+// characters, so none is cut.
 function showFlash(msg, duration = 2000) {
    clearFlash();
    $("flash-msg").textContent = msg;
-    flashTimer = setTimeout(() => {
-        $("flash-msg").textContent = "";
-        flashTimer = null;
-    }, duration);
+    $("flash-msg").title = msg;
+    flashTimer = setTimeout(clearFlash, duration);
 }

 // A stored token balance as a number, or null when there is no number in it.
@@ -243,6 +252,19 @@ function unknownableAmount(balance) {
    return Number.isFinite(n) ? n : null;
 }

+// A network fee in wei as the confirmation and approval screens both show it:
+// the ETH figure through truncateAmountNeverZero(), then its USD value when the
+// ETH price is known. The USD value is of the exact fee, not of the truncated
+// figure.
+function formatFee(wei) {
+    const eth = formatEther(wei);
+    const ethPrice = getPrice("ETH");
+    const usd = ethPrice ? formatUsd(parseFloat(eth) * ethPrice) : "";
+    return (
+        truncateAmountNeverZero(eth) + " ETH" + (usd ? " (" + usd + ")" : "")
+    );
+}
+
 // One row of the balance list: symbol, quantity, fiat value.
 //
 // `symbol` is the ERC-20's own symbol() as the block explorer reported it,
@@ -288,6 +310,9 @@ function balanceLinesForAddress(addr, trackedTokens, showZero) {
    );
    const seen = new Set();
    for (const t of addr.tokenBalances || []) {
+        // A holding below 0.000001 is not listed, tracked or not. A tracked
+        // token then gets the zero row below while showZero is on.
+        if (isBelowOneMillionth(t.balance)) continue;
        // A null balance is a holding of an unstatable amount, not a holding
        // of zero, so the show-zero setting has no say over it: hiding it
        // would be asserting the zero nobody established. Anything that does
@@ -318,14 +343,16 @@ function balanceLinesForAddress(addr, trackedTokens, showZero) {
 }

 // Whether an address holds anything at all: ETH or any ERC-20 the wallet
-// knows about. Deliberately unrounded — the rendered lines round to four
-// decimals, so a dust balance displays as 0.0000 while still being real
-// money at a real address. Callers that warn about holdings must ask this,
-// not the rendered figure.
+// knows about, except a token holding below 0.000001, which the balance list
+// under the remove-address warning leaves out too. Deliberately unrounded —
+// the rendered lines round to four decimals, so a dust balance displays as
+// 0.0000 while still being real money at a real address. Callers that warn
+// about holdings must ask this, not the rendered figure.
 function addressHoldsFunds(addr) {
    if (!addr) return false;
    if (parseFloat(addr.balance || "0") > 0) return true;
    for (const t of addr.tokenBalances || []) {
+        if (isBelowOneMillionth(t.balance)) continue;
        // A null balance is a holding whose amount could not be stated —
        // balances.js drops a row of zero base units before the scale is
        // consulted, so a row that survived with no quantity is holding
@@ -404,6 +431,29 @@ function addressTitle(address, wallets) {
    return null;
 }

+// What every recipient line and history row says for a transaction with no
+// `to`. Such a transaction creates a contract, so there is no address to show,
+// and a blank line on these screens reads as a rendering fault.
+const CONTRACT_CREATION_TEXT =
+    "This transaction creates a new contract. It has no recipient.";
+
+// The last two lines of a transaction history row: the counterparty's colour
+// dot and name beside the amount, then its full address. A contract creation
+// the user sent has no counterparty (its `to` is ""), so its row has the
+// amount alone and the contract creation sentence in place of the address.
+function txCounterpartyHtml(address, nameHtml, amountHtml) {
+    if (!address) {
+        return (
+            `<div class="flex justify-between"><span></span><span>${amountHtml}</span></div>` +
+            `<div>${escapeHtml(CONTRACT_CREATION_TEXT)}</div>`
+        );
+    }
+    return (
+        `<div class="flex justify-between"><span class="flex items-center">${addressDotHtml(address)}${nameHtml}</span><span>${amountHtml}</span></div>` +
+        `<div class="am-address">${escapeHtml(address)}</div>`
+    );
+}
+
 // Render an address with color dot, optional ENS name, optional title,
 // and optional truncation. Title and ENS are shown as bold labels above
 // the full address.
@@ -610,11 +660,14 @@ module.exports = {
    balanceLinesForAddress,
    addressHoldsFunds,
    unknownableAmount,
+    formatFee,
    addressColor,
    addressDotHtml,
    escapeHtml,
    displaySymbol,
    addressTitle,
+    CONTRACT_CREATION_TEXT,
+    txCounterpartyHtml,
    formatAddressHtml,
    renderAddressHtml,
    copyableHtml,
@@ -6,6 +6,7 @@ const {
    isoDate,
    timeAgo,
    addressDotHtml,
+    txCounterpartyHtml,
    addressTitle,
    escapeHtml,
    displaySymbol,
@@ -122,16 +123,13 @@ function renderHomeTxList(ctx) {
        // names it on the line above rather than replacing it.
        const title = addressTitle(counterparty, state.wallets);
        const titleStr = title ? escapeHtml(title) : "";
-        const addrStr = escapeHtml(counterparty);
-        const dot = addressDotHtml(counterparty);
        const err = tx.isError ? " (failed)" : "";
        const opacity = tx.isError ? " opacity:0.5;" : "";
        const ago = escapeHtml(timeAgo(tx.timestamp));
        const iso = escapeHtml(isoDate(tx.timestamp));
        html += `<div class="home-tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
        html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
-        html += `<div class="flex justify-between"><span class="flex items-center">${dot}${titleStr}</span><span>${amountStr}</span></div>`;
-        html += `<div class="am-address">${addrStr}</div>`;
+        html += txCounterpartyHtml(counterparty, titleStr, amountStr);
        html += `</div>`;
        i++;
    }
@@ -16,6 +16,10 @@ const { resolveTokenDecimals } = require("../../shared/approvalAmount");
 const { resolveSymbol } = require("../../shared/tokenList");
 const { isLowHolderCount } = require("../../shared/holders");
 const { isSpoofedSymbol } = require("../../shared/symbolSpoof");
+const {
+    truncateAmountNeverZero,
+    isBelowOneMillionth,
+} = require("../../shared/amountDisplay");
 const { getAddress } = require("ethers");

 const ZERO_ADDRESS = "0x0000000000000000000000000000000000000000";
@@ -63,13 +67,13 @@ function validateToAddress(value) {
            if (checksummed !== v) {
                return {
                    valid: false,
-                    error: "Address checksum is invalid. Please double-check the address.",
+                    error: "Address checksum is invalid. Check the address.",
                };
            }
        } catch {
            return {
                valid: false,
-                error: "Address checksum is invalid. Please double-check the address.",
+                error: "Address checksum is invalid. Check the address.",
            };
        }
    }
@@ -125,6 +129,10 @@ function renderSendTokenSelect(addr) {
        (state.fraudContracts || []).map((a) => a.toLowerCase()),
    );
    for (const t of addr.tokenBalances || []) {
+        // A holding below 0.000001 is left out, as the balance lists leave it
+        // out. Its token's own screen can still send it: there
+        // state.selectedToken picks the token, not this list.
+        if (isBelowOneMillionth(t.balance)) continue;
        if (isSpoofedSymbol(t.symbol, t.address)) continue;
        if (fraudSet.has(t.address.toLowerCase())) continue;
        // An unknown holder count does not withhold a token the user holds:
@@ -138,6 +146,50 @@ function renderSendTokenSelect(addr) {
    }
 }

+// The token balance and scale the Send screen states and hands the
+// confirmation screen, so the two screens describe the holding the same way.
+//
+// The scale is resolved the same way balances.js resolved the scale it
+// DISPLAYED this token's balance at: bundled list, then the user's tracked
+// tokens, then the explorer. The stored tokenBalances[].decimals is the
+// explorer's own answer alone, so reading it raw carries a null forward for a
+// token the wallet does know the scale of — and displayedDecimals() then throws
+// inside estimateGas(), which the confirmation screen reports as an unestimable
+// fee. Unsendable, over a scale that was never in doubt
+// (https://git.eeqj.de/sneak/AutistMask/issues/349). Still null when nothing
+// knows: no fallback.
+//
+// Resolved WITH `wallets`, which balances.js does not pass: that adds
+// explorerDecimals()'s cross-address check, so a contract two addresses report
+// different scales for answers null rather than picking one. That check has to
+// apply here, because this scale encodes the transfer — it is carried forward
+// so the transfer is encoded with the number the user read rather than with
+// whatever the contract answers at signing time (see
+// src/shared/transferAmount.js). balances.js is formatting one explorer row at
+// fetch time and cannot consult a state it is in the middle of replacing.
+//
+// The two resolutions can therefore differ, and where they do, the stored
+// `balance` is a quantity computed at a scale this screen has just declined to
+// stand behind. Stating it would leave validateTransfer() checking the amount
+// against a number the wallet does not vouch for, so it is withdrawn: unknown
+// scale means unknown balance. It is null rather than "0": both screens state
+// an unknown balance as unknown, and validateTransfer() treats it as no balance
+// to spend from, which is the fail-closed side of an amount nobody can check.
+// Only a stored quantity is withdrawn: the "0" for a token that has no row at
+// all is an absence of holdings, which is true at every scale.
+function tokenBalanceAndDecimals(addr, token) {
+    const tb = (addr.tokenBalances || []).find(
+        (t) => t.address.toLowerCase() === token.toLowerCase(),
+    );
+    const tokenDecimals = resolveTokenDecimals(token, {
+        trackedTokens: state.trackedTokens,
+        wallets: state.wallets,
+    });
+    if (!tb) return { tokenBalance: "0", tokenDecimals };
+    if (tokenDecimals === null) return { tokenBalance: null, tokenDecimals };
+    return { tokenBalance: tb.balance ?? null, tokenDecimals };
+}
+
 function updateSendBalance() {
    const addr = currentAddress();
    if (!addr) return;
@@ -150,24 +202,27 @@ function updateSendBalance() {
    const token = state.selectedToken || $("send-token").value;
    if (token === "ETH") {
        $("send-balance").textContent =
-            "Current balance: " + (addr.balance || "0") + " ETH";
+            "Current balance: " +
+            truncateAmountNeverZero(addr.balance || "0") +
+            " ETH";
    } else {
-        const tb = (addr.tokenBalances || []).find(
-            (t) => t.address.toLowerCase() === token.toLowerCase(),
-        );
        const symbol = resolveSymbol(
            token,
            addr.tokenBalances,
            state.trackedTokens,
        );
-        // A null balance is a holding whose scale nothing knows. Saying "0"
-        // for it would be a claim about the amount; the send itself is
+        // A null balance is a holding whose scale is unknown. Saying a figure
+        // for it would be a claim about the amount, so it reads as the
+        // confirmation screen's balance line reads it; the send itself is
        // refused later by transferAmountUnits() for the same missing scale.
-        const bal = tb ? tb.balance : "0";
+        const bal = tokenBalanceAndDecimals(addr, token).tokenBalance;
        $("send-balance").textContent =
            bal == null
                ? "Current balance: unknown (" + symbol + ")"
-                : "Current balance: " + bal + " " + symbol;
+                : "Current balance: " +
+                  truncateAmountNeverZero(bal) +
+                  " " +
+                  symbol;
    }
 }

@@ -211,7 +266,7 @@ function init(_ctx) {
                const provider = getProvider(state.rpcUrl, state.networkId);
                const resolved = await provider.resolveName(to);
                if (!resolved) {
-                    showFlash("Could not resolve " + to);
+                    showFlash("That ENS name has no address.");
                    return;
                }
                resolvedTo = resolved;
@@ -227,59 +282,17 @@ function init(_ctx) {

        let tokenSymbol = null;
        let tokenBalance = null;
-        // The scale the amount and the balance below are rendered at, carried
-        // forward so the transfer is encoded with the number the user read
-        // rather than with whatever the contract answers at signing time. See
-        // src/shared/transferAmount.js.
        let tokenDecimals = null;
        if (token !== "ETH") {
-            const tb = (addr.tokenBalances || []).find(
-                (t) => t.address.toLowerCase() === token.toLowerCase(),
-            );
            tokenSymbol = resolveSymbol(
                token,
                addr.tokenBalances,
                state.trackedTokens,
            );
-            // null carried through rather than flattened to "0": the confirm
-            // screen states an unknown balance as unknown, and
-            // validateTransfer() treats it as no balance to spend from, which
-            // is the fail-closed side of an amount nobody can check.
-            tokenBalance = tb ? (tb.balance ?? null) : "0";
-            // Resolved the same way balances.js resolved the scale it
-            // DISPLAYED this token's balance at: bundled list, then the user's
-            // tracked tokens, then the explorer. The stored
-            // tokenBalances[].decimals is the explorer's own answer alone, so
-            // reading it raw carries a null forward for a token the wallet
-            // does know the scale of — and displayedDecimals() then throws
-            // inside estimateGas(), which the confirmation screen reports as
-            // an unestimable fee. Unsendable, over a scale that was never in
-            // doubt (https://git.eeqj.de/sneak/AutistMask/issues/349).
-            // Still null when nothing knows: no fallback.
-            //
-            // Resolved WITH `wallets`, which balances.js does not pass: that
-            // adds explorerDecimals()'s cross-address check, so a contract two
-            // addresses report different scales for answers null rather than
-            // picking one. That check has to apply here, because this value
-            // encodes a transfer; balances.js is formatting one explorer row
-            // at fetch time and cannot consult a state it is in the middle of
-            // replacing.
-            tokenDecimals = resolveTokenDecimals(token, {
-                trackedTokens: state.trackedTokens,
-                wallets: state.wallets,
-            });
-            // The two resolutions can therefore differ, and where they do, the
-            // stored `balance` is a quantity computed at a scale this screen
-            // has just declined to stand behind. Stating it would leave
-            // validateTransfer() checking the amount against a number the
-            // wallet does not vouch for, and — since the unknown-balance path
-            // is gated on the balance, not on the scale — would leave the
-            // fee-estimate failure as the only thing on the confirmation
-            // screen, which says nothing about decimals. Unknown scale means
-            // unknown balance. Only a stored quantity is withdrawn: the "0"
-            // for a token that has no row at all is an absence of holdings,
-            // which is true at every scale.
-            if (tb && tokenDecimals === null) tokenBalance = null;
+            ({ tokenBalance, tokenDecimals } = tokenBalanceAndDecimals(
+                addr,
+                token,
+            ));
        }

        ctx.showConfirmTx({
@@ -29,46 +29,63 @@ const {
    GITEA_COMMIT_URL,
 } = require("../../shared/buildInfo");

-const { notify } = require("../../shared/browserApi");
+const { notify, sendMessage } = require("../../shared/browserApi");

 let versionClickCount = 0;
 let versionClickTimer = null;

-function renderSiteList(containerId, siteMap, stateKey) {
+// One row per hostname, however many addresses or origins it appears under,
+// each with an [x] that hands it to onRemove.
+function renderSiteList(containerId, hostnames, onRemove) {
    const container = $(containerId);
-    const hostnames = [...new Set(Object.values(siteMap).flat())];
-    if (hostnames.length === 0) {
+    const unique = [...new Set(hostnames)];
+    if (unique.length === 0) {
        container.innerHTML = '<p class="text-xs text-muted">None</p>';
        return;
    }
    let html = "";
-    hostnames.forEach((hostname) => {
+    unique.forEach((hostname) => {
        html += `<div class="flex justify-between items-center text-xs py-1 border-b border-border-light">`;
        // A hostname the URL parser produced cannot carry a delimiter, so
        // this is escaped for the rule rather than for a known hole — the
        // rule being that nothing reaches innerHTML unescaped.
        html += `<span>${escapeHtml(hostname)}</span>`;
-        html += `<button class="btn-remove-site border border-border px-1 hover:bg-fg hover:text-bg cursor-pointer" data-key="${escapeHtml(stateKey)}" data-hostname="${escapeHtml(hostname)}">[x]</button>`;
+        html += `<button class="btn-remove-site border border-border px-1 hover:bg-fg hover:text-bg cursor-pointer" data-hostname="${escapeHtml(hostname)}">[x]</button>`;
        html += `</div>`;
    });
    container.innerHTML = html;
    container.querySelectorAll(".btn-remove-site").forEach((btn) => {
-        btn.addEventListener("click", async () => {
-            const key = btn.dataset.key;
-            const host = btn.dataset.hostname;
-            for (const addr of Object.keys(state[key])) {
-                state[key][addr] = state[key][addr].filter((h) => h !== host);
-                if (state[key][addr].length === 0) {
-                    delete state[key][addr];
-                }
-            }
-            await saveState();
-            notify({ type: "AUTISTMASK_REMOVE_SITE" });
-            renderSiteList(containerId, state[key], key);
-        });
+        btn.addEventListener("click", () => onRemove(btn.dataset.hostname));
    });
 }

+// Drop a hostname from a remembered site list under every address.
+function forgetHostname(siteMap, hostname) {
+    for (const addr of Object.keys(siteMap)) {
+        siteMap[addr] = siteMap[addr].filter((h) => h !== hostname);
+        if (siteMap[addr].length === 0) {
+            delete siteMap[addr];
+        }
+    }
+}
+
+// Removing a site from Allowed Sites or Connected Sites disconnects it: it is
+// no longer allowed under any address, and the background ends its
+// connections approved without "Remember" and tells its open tabs.
+async function removeAllowedSite(hostname) {
+    forgetHostname(state.allowedSites, hostname);
+    await saveState();
+    notify({ type: "AUTISTMASK_REMOVE_SITE", hostname });
+    await renderSiteLists();
+}
+
+// Removing a denied site only forgets the refusal; it connects nothing.
+async function removeDeniedSite(hostname) {
+    forgetHostname(state.deniedSites, hostname);
+    await saveState();
+    await renderSiteLists();
+}
+
 function renderTrackedTokens() {
    const container = $("settings-tracked-tokens");
    if (state.trackedTokens.length === 0) {
@@ -202,13 +219,24 @@ function show() {
    showView("settings");
 }

-function renderSiteLists() {
+async function renderSiteLists() {
    renderSiteList(
        "settings-allowed-sites",
-        state.allowedSites,
-        "allowedSites",
+        Object.values(state.allowedSites).flat(),
+        removeAllowedSite,
+    );
+    renderSiteList(
+        "settings-denied-sites",
+        Object.values(state.deniedSites).flat(),
+        removeDeniedSite,
+    );
+    // Sites allowed without "Remember" are held only by the background, in
+    // memory, so it is asked for them.
+    renderSiteList(
+        "settings-connected-sites",
+        await sendMessage({ type: "AUTISTMASK_GET_CONNECTED_SITES" }),
+        removeAllowedSite,
    );
-    renderSiteList("settings-denied-sites", state.deniedSites, "deniedSites");
 }

 function init(ctx) {
@@ -236,18 +264,12 @@ function init(ctx) {
            const json = await resp.json();
            if (json.error) {
                log.errorf("RPC validation error:", json.error);
-                showFlash("Endpoint returned error: " + json.error.message);
+                showFlash("Endpoint returned an error.");
                return;
            }
            const net = currentNetwork();
            if (json.result !== net.chainId) {
-                showFlash(
-                    "Wrong network (expected " +
-                        net.name +
-                        ", got chain " +
-                        json.result +
-                        ").",
-                );
+                showFlash("Wrong network: expected " + net.name + ".");
                return;
            }
        } catch (e) {
@@ -115,9 +115,7 @@ function init(_ctx) {
    $("btn-settings-addtoken-manual").addEventListener("click", async () => {
        const addr = $("settings-addtoken-address").value.trim();
        if (!addr || !addr.startsWith("0x")) {
-            showFlash(
-                "Please enter a valid contract address starting with 0x.",
-            );
+            showFlash("Enter a valid contract address starting with 0x.");
            return;
        }
        if (isTracked(addr)) {
@@ -155,8 +153,15 @@ function init(_ctx) {
            ctx.doRefreshAndRender();
        } catch (e) {
            const detail = e.shortMessage || e.message || String(e);
-            log.errorf("Token lookup failed for", addr, detail);
-            showFlash(detail);
+            log.errorf("Adding token failed for", addr, detail);
+            // lookupTokenInfo() rejects a contract with a one-line message
+            // starting "Not a valid ERC-20 token". Any other error, such as a
+            // failed save, can be far longer, so it is only logged.
+            showFlash(
+                detail.startsWith("Not a valid ERC-20 token")
+                    ? detail
+                    : "Could not add the token.",
+            );
            infoEl.textContent = "";
            infoEl.style.visibility = "hidden";
        }
@@ -7,6 +7,7 @@ const {
    showFlash,
    flashCopyFeedback,
    addressTitle,
+    CONTRACT_CREATION_TEXT,
    addressDotHtml,
    escapeHtml,
    isoDate,
@@ -94,13 +95,18 @@ function render() {
    $("tx-detail-hash").innerHTML = txHashHtml(tx.hash);

    const fromTitle = addressTitle(tx.from, state.wallets);
-    const toTitle = addressTitle(tx.to, state.wallets);
    $("tx-detail-from").innerHTML = txAddressHtml(
        tx.from,
        tx.fromEns,
        fromTitle,
    );
-    $("tx-detail-to").innerHTML = txAddressHtml(tx.to, tx.toEns, toTitle);
+    // A contract creation has no recipient: transactions.js gives it `to: ""`.
+    if (tx.to) {
+        const toTitle = addressTitle(tx.to, state.wallets);
+        $("tx-detail-to").innerHTML = txAddressHtml(tx.to, tx.toEns, toTitle);
+    } else {
+        $("tx-detail-to").innerHTML = escapeHtml(CONTRACT_CREATION_TEXT);
+    }

    // Exact amount (full precision, copyable)
    const detailSym = displaySymbol(tx.symbol);
@@ -4,6 +4,7 @@ const {
    $,
    showView,
    addressTitle,
+    CONTRACT_CREATION_TEXT,
    escapeHtml,
    renderAddressHtml,
    attachCopyHandlers,
@@ -58,7 +59,10 @@ function endWait() {
    }
 }

+// A contract creation reaches these screens with `to` as "" (approval.js
+// writes `to: toAddr || ""`).
 function toAddressHtml(address) {
+    if (!address) return escapeHtml(CONTRACT_CREATION_TEXT);
    const title = addressTitle(address, state.wallets);
    return renderAddressHtml(address, { title });
 }
@@ -202,8 +206,9 @@ function restoreWait() {
    if (!info || typeof info !== "object" || Array.isArray(info)) return false;
    // A string is the whole requirement: the empty string is what a
    // contract-deployment approval persists (approval.js writes `to: toAddr
-    // || ""`), and both fields render harmlessly when empty, so refusing it
-    // would abandon a wait the live path itself created.
+    // || ""`), an empty `to` renders as a contract creation and an empty
+    // amount renders harmlessly, so refusing it would abandon a wait the live
+    // path itself created.
    if (typeof info.to !== "string") return false;
    if (typeof info.amount !== "string") return false;
    if (typeof w.broadcastTime !== "number" || !isFinite(w.broadcastTime)) {
@@ -6,10 +6,10 @@
 // (`src/shared/uniswap.js`) — and a fix applied to one of them left the other
 // two showing a different number for the same value.
 //
-// The two functions below are the two policies, not two implementations of
-// one: summary lists truncate, and the screens that state what is being
-// authorized truncate with a floor. Keeping them adjacent is the point, so a
-// change to the rule cannot reach one screen and miss another.
+// The two truncation functions below are the two policies, not two
+// implementations of one: summary lists truncate, and the screens that state
+// what is being authorized truncate with a floor. Keeping them adjacent is the
+// point, so a change to the rule cannot reach one screen and miss another.

 // Truncate to exactly four decimal places. Truncation, never rounding: an
 // amount must never be displayed as larger than it is, so 0.99999 stays
@@ -43,4 +43,18 @@ function truncateAmountNeverZero(val) {
    return parts[0] + "." + parts[1].slice(0, sig + 1);
 }

-module.exports = { truncateAmount, truncateAmountNeverZero };
+// Whether a stored token balance is a holding below 0.000001. The balance
+// lists, the send-screen token selector, the address total and the
+// remove-address warning leave such a holding out; the Send and confirmation
+// screens show it when its token is the one being sent. Exact, because
+// src/shared/balances.js stores plain decimal digits: below 0.000001 the
+// balance reads "0.000000" and then more digits.
+function isBelowOneMillionth(balance) {
+    return typeof balance === "string" && balance.startsWith("0.000000");
+}
+
+module.exports = {
+    truncateAmount,
+    truncateAmountNeverZero,
+    isBelowOneMillionth,
+};
@@ -52,19 +52,16 @@ function requireNetworkId(networkId) {
    return net;
 }

-function formatBalance(wei) {
-    const eth = formatEther(wei);
-    const parts = eth.split(".");
-    if (parts.length === 1) return eth + ".0";
-    const dec = parts[1].slice(0, 6).replace(/0+$/, "") || "0";
-    return parts[0] + "." + dec;
-}
-
+// A token balance as an exact decimal string, never cut: a cut stores a small
+// nonzero holding as zero. fetchTokenBalances() stores every nonzero holding of
+// a token it admits, however small; the screens that leave out one below
+// 0.000001 decide that themselves, through isBelowOneMillionth() in
+// src/shared/amountDisplay.js.
 function formatTokenBalance(raw, decimals) {
    const val = formatUnits(raw, decimals);
    const parts = val.split(".");
    if (parts.length === 1) return val + ".0";
-    const dec = parts[1].slice(0, 6).replace(/0+$/, "") || "0";
+    const dec = parts[1].replace(/0+$/, "") || "0";
    return parts[0] + "." + dec;
 }

@@ -149,11 +146,7 @@ async function fetchTokenBalances(address, blockscoutUrl, trackedTokens) {
            const scale = known !== null ? known : decimals;
            // null is a holding of an amount that cannot be stated, which is
            // not the same as a holding of zero, and must never render as one.
-            // With a scale, the display filter proper applies: a balance that
-            // rounds to zero at six places is dust and is not listed. Without
-            // one there is no such judgement to make, and the row is kept.
            const bal = scale === null ? null : formatTokenBalance(raw, scale);
-            if (bal === "0.0") continue;
            // null means the explorer reported no count, which is not the
            // same as a count of zero.  This gate is not the low-holder
            // display filter: it has no user-facing off switch and governs
@@ -221,7 +214,9 @@ async function refreshBalances(
                provider
                    .getBalance(addr.address)
                    .then((bal) => {
-                        addr.balance = formatBalance(bal);
+                        // Exact, never cut: a cut here stores a small nonzero
+                        // balance as zero.
+                        addr.balance = formatEther(bal);
                        log.debugf("ETH balance", addr.address, addr.balance);
                    })
                    .catch((e) => {
@@ -1,6 +1,7 @@
 // Price fetching with 5-minute cache, USD formatting, value aggregation.

 const { getTopTokenPrices } = require("./tokenList");
+const { isBelowOneMillionth } = require("./amountDisplay");

 const PRICE_CACHE_TTL = 300000; // 5 minutes

@@ -78,6 +79,9 @@ function getAddressValue(addr) {
    let usd = parseFloat(addr.balance || "0") * prices.ETH;
    let partial = false;
    for (const token of addr.tokenBalances || []) {
+        // A holding below 0.000001 is left out, as the balance lists leave it
+        // out, so the total never counts a holding the list does not show.
+        if (isBelowOneMillionth(token.balance)) continue;
        // A null balance is a holding whose scale nothing knows, so it has no
        // quantity to price — but it is still a holding, and a total that
        // silently omits it would read as complete. That is exactly what
@@ -139,7 +139,15 @@ function validateTransfer({
    const feeFp = known ? feeWei : null;

    if (isErc20) {
-        const tokenFp = toFixedPoint(tokenBalance) ?? 0n;
+        // A token can declare more than 18 decimals, and its balance is
+        // stored with all of them. Only the first 18 places (SCALE_DECIMALS)
+        // are read: an amount with more was refused above, so the places
+        // after them cannot decide whether the amount fits.
+        const tokenText =
+            typeof tokenBalance === "string"
+                ? tokenBalance.replace(/(\.\d{18})\d+$/, "$1")
+                : tokenBalance;
+        const tokenFp = toFixedPoint(tokenText) ?? 0n;
        if (amountFp > tokenFp) codes.push(CODES.INSUFFICIENT_TOKEN);
        if (feeFp !== null && feeFp > ethFp) {
            codes.push(CODES.INSUFFICIENT_ETH_FOR_FEE);
@@ -100,6 +100,13 @@ const NO_MINIMUM = "None (no minimum guaranteed)";
 // Permit2 amounts are uint160; the maximum is Permit2's "unbounded".
 const MAX_UINT160 = BigInt("0xffffffffffffffffffffffffffffffffffffffff");

+// WETH, the token UNWRAP_WETH turns into ETH: on mainnet, then on Sepolia.
+// decode() is not told the network, so it takes either.
+const WETH_ADDRESSES = [
+    "0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2",
+    "0xfff9976782d46cc05630d1f6ebab18b2324d6b14",
+];
+
 // `decimals` is null when nothing knows this token's scale. It is not
 // defaulted to 18: the swap lines land on the same approval screen as the
 // ERC-20 line, and a scale guessed there is what showed a 1,000 USDT swap as
@@ -198,11 +205,6 @@ function decodeV2SwapExactIn(input) {
 // Decode V2_SWAP_EXACT_OUT (command 0x09) input bytes.
 // ABI: (address recipient, uint256 amountOut, uint256 amountInMax,
 //        address[] path, bool payerIsUser)
-//
-// Nothing calls this: decode() has no 0x09 arm, so a V2 exact-out swap gets
-// its command name and no token or amount detail. Kept for the fix, which is
-// https://git.eeqj.de/sneak/AutistMask/issues/283.
-// eslint-disable-next-line no-unused-vars
 function decodeV2SwapExactOut(input) {
    try {
        const d = coder.decode(
@@ -447,6 +449,7 @@ function decode(data, toAddress, sources) {
        let outputToken = null;
        let minOutput = null;
        let hasUnwrapWeth = false;
+        let hasV2ExactOut = false;
        const commandNames = [];

        // THE INVARIANT: an amount and the token it is counted in always come
@@ -521,6 +524,16 @@ function decode(data, toAddress, sources) {
                    }
                }

+                if (cmdId === 0x09) {
+                    // Buys exactly amountOut and spends at most amountInMax.
+                    hasV2ExactOut = true;
+                    const s = decodeV2SwapExactOut(inputs[i]);
+                    if (s) {
+                        setInputOnce(s.tokenIn, s.amountInMax);
+                        setOutput(s.tokenOut, s.amountOut);
+                    }
+                }
+
                if (cmdId === 0x0b) {
                    const w = decodeWrapEth(inputs[i]);
                    if (w) {
@@ -559,12 +572,19 @@ function decode(data, toAddress, sources) {

        // Resolve token info. A null token on either side means the calldata
        // named no currency for it; tokenInfo() refuses rather than calling it
-        // ETH. UNWRAP_WETH is the one output that is ETH without a currency to
-        // decode, and it is answered here rather than left to that rule.
+        // ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
+        // when the output side is WETH, or when no step set the output side.
+        // Any other output keeps its own token and figure: a swap that buys
+        // USDC and then unwraps the WETH it did not spend receives USDC.
+        const outputIsWeth =
+            present(outputToken) &&
+            WETH_ADDRESSES.includes(outputToken.toLowerCase());
+        const outputUnset = !present(outputToken) && !present(minOutput);
        const inInfo = tokenInfo(inputToken, sources);
-        const outInfo = hasUnwrapWeth
-            ? { symbol: "ETH", decimals: 18, address: null }
-            : tokenInfo(outputToken, sources);
+        const outInfo =
+            hasUnwrapWeth && (outputIsWeth || outputUnset)
+                ? { symbol: "ETH", decimals: 18, address: null }
+                : tokenInfo(outputToken, sources);

        const inSymbol = inInfo.symbol;
        const outSymbol = outInfo.symbol;
@@ -613,6 +633,17 @@ function decode(data, toAddress, sources) {
                amount = { raw: OPEN_DELTA_AMOUNT, display: OPEN_DELTA_AMOUNT };
            } else if (inputAmount >= MAX_UINT160) {
                amount = { raw: "Unlimited", display: "Unlimited" };
+            } else if (hasV2ExactOut) {
+                // A V2 exact-out swap spends at most this figure, whichever
+                // step set the line (its amountInMax, the WRAP_ETH of a swap
+                // paid in ETH, a permit), so it is said to be a maximum, in
+                // `raw` too: the wait, success and error screens show `raw` as
+                // the transaction's amount.
+                const most = amountText(inputAmount, inInfo);
+                amount = {
+                    raw: "Up to " + most.raw,
+                    display: "Up to " + most.display,
+                };
            } else {
                amount = amountText(inputAmount, inInfo);
            }
@@ -41,12 +41,10 @@ const DEFECTS = {
                "changed or removed, and this wallet stays until you delete " +
                "it yourself.",
        ],
-        // One sentence for the places that have room for one: the flash on a
-        // blocked Send, the inline error on the approval screens.
-        shortMessage:
-            "This wallet cannot sign, because it was imported from an " +
-            "extended private key that is not a master key. The wallet list " +
-            "explains what happened.",
+        // One line, for the flash on a blocked Send and the inline error on
+        // the approval screens. It must fit on the flash line; see showFlash()
+        // in src/popup/views/helpers.js.
+        shortMessage: "This wallet cannot sign. See the wallet list.",
    },
 };

@@ -12,12 +12,15 @@ function sameAddress(a, b) {
    return String(a).toLowerCase() === String(b).toLowerCase();
 }

-// Forget every site permission held against the given addresses.
+// Forget every site permission held against the given addresses: the
+// remembered ones in `state`, and the connections approved without
+// "Remember", which only the background holds, in memory.
 function dropSitePermissions(state, addresses) {
    for (const addr of addresses) {
        delete state.allowedSites[addr];
        delete state.deniedSites[addr];
    }
+    notify({ type: "AUTISTMASK_ADDRESSES_REMOVED", addresses });
 }

 // Remove wallet `walletIdx` from `state` and repair the derived state.
@@ -25,6 +25,10 @@ const { Network, Wallet } = require("ethers");
 // what the user is actually shown.
 const { describeSigningFailure } = require("../src/shared/approvalVerify");
 const { makeStorageStub } = require("./support/storageStub");
+const {
+    removeAddressFromState,
+    removeWalletFromState,
+} = require("../src/shared/walletDelete");

 const SIGNER_KEY =
    "0x59c6995e998f97a5a0044966f0945389dc9e86dae88c7a8412f4603b6b78690d";
@@ -2096,3 +2100,260 @@ describe("a site connection decided as the popup closes", () => {
        });
    });
 });
+
+// What a site is told when it asks which account it may use.
+async function siteAccounts(bg, origin) {
+    const { sendResponse } = bg.send(
+        { type: "AUTISTMASK_RPC", method: "eth_accounts", params: [] },
+        { origin: origin || FRESH_ORIGIN },
+    );
+    await settle();
+    return sendResponse.mock.calls[0][0];
+}
+
+// A site connected without "Remember" is held only in the background's memory,
+// keyed to the address it was connected to. Removing that address, or the
+// wallet holding it, must end the connection as part of the removal itself.
+// The accountsChanged broadcast the views send afterwards also clears it, but
+// only when the active address moved, and nothing waits for it to arrive.
+//
+// Each test asks the background while storage still names the removed address
+// as active, because the popup has not saved yet, so the answer turns on the
+// connection alone.
+describe("removing an address ends a site's connection to it", () => {
+    // FRESH_ORIGIN connected to the active address without "Remember", in a
+    // wallet holding a second address so that one can be removed at all. The
+    // popup's messages reach the background as they would from the popup.
+    async function connectedBackground() {
+        const bg = loadBackground({ actionPopup: true });
+        const stored = bg.storage.read("autistmask");
+        stored.wallets[0].addresses.push({
+            address: other.address,
+            balance: "0",
+            tokenBalances: [],
+        });
+        bg.storage.write("autistmask", stored);
+
+        const pending = bg.requestSite();
+        await settle();
+        bg.connectApproval(pending.id()).decide(true, false);
+        await settle();
+        expect(pending.result()).toEqual({ result: [signer.address] });
+
+        global.chrome.runtime.sendMessage = (msg) => {
+            bg.send(msg, bg.fromPopup);
+        };
+        return bg;
+    }
+
+    test("removing the connected address ends the connection", async () => {
+        const bg = await connectedBackground();
+        expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
+
+        const popupState = bg.storage.read("autistmask");
+        expect(removeAddressFromState(popupState, 0, 0).removed).toBe(true);
+
+        expect(await siteAccounts(bg)).toEqual({ result: [] });
+    });
+
+    test("deleting the wallet holding the connected address ends the connection", async () => {
+        const bg = await connectedBackground();
+        expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
+
+        const popupState = bg.storage.read("autistmask");
+        removeWalletFromState(popupState, 0);
+
+        expect(await siteAccounts(bg)).toEqual({ result: [] });
+    });
+
+    test("removing a different address leaves the connection alone", async () => {
+        const bg = await connectedBackground();
+
+        const popupState = bg.storage.read("autistmask");
+        expect(removeAddressFromState(popupState, 0, 1).removed).toBe(true);
+
+        expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
+    });
+
+    test("a page cannot end the connection", async () => {
+        const bg = await connectedBackground();
+
+        const spoof = bg.send(
+            {
+                type: "AUTISTMASK_ADDRESSES_REMOVED",
+                addresses: [signer.address],
+            },
+            { url: FRESH_ORIGIN + "/index.html" },
+        );
+
+        expect(spoof.sendResponse).toHaveBeenCalledWith({
+            error: "Unauthorized sender",
+        });
+        expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
+    });
+});
+
+// Settings lists the sites allowed without "Remember", which only the
+// background holds, and removing a site there, from either list, disconnects
+// it. These drive the real Settings view against the real background and
+// click the [x] the user clicks.
+describe("removing a site in Settings disconnects it", () => {
+    // FRESH_ORIGIN on another port, so its hostname is FRESH_ORIGIN's.
+    const FRESH_OTHER_PORT = "https://fresh.example:8443";
+
+    // A site list's container. Its [x] buttons, data attributes and all, are
+    // read back out of the rows the view wrote into it, so clicking one runs
+    // the handler the view attached to it.
+    function fakeSiteList() {
+        const list = {
+            innerHTML: "",
+            buttons: [],
+            querySelectorAll() {
+                const tags = list.innerHTML.match(/<button[^>]*>/g) || [];
+                list.buttons = tags.map((tag) => ({
+                    dataset: Object.fromEntries(
+                        [...tag.matchAll(/data-(\w+)="([^"]*)"/g)].map(
+                            (match) => [match[1], match[2]],
+                        ),
+                    ),
+                    addEventListener(event, handler) {
+                        this[event] = handler;
+                    },
+                }));
+                return list.buttons;
+            },
+        };
+        return list;
+    }
+
+    // The hostnames a site list shows.
+    function listed(list) {
+        return [...list.innerHTML.matchAll(/data-hostname="([^"]*)"/g)].map(
+            (match) => match[1],
+        );
+    }
+
+    // A site connected the way the user does it, in the approval popup.
+    async function connect(bg, origin, remember) {
+        const pending = bg.requestSite(origin);
+        await settle();
+        bg.connectApproval(pending.id()).decide(true, remember);
+        await settle();
+        expect(pending.result()).toEqual({ result: [signer.address] });
+    }
+
+    // Settings, opened over the background's storage and wired to it the way
+    // the popup is: what Settings sends reaches the background from the
+    // extension's own page, and the answer comes back.
+    async function openSettings(bg) {
+        const lists = {};
+        const element = (id) => (lists[id] ||= fakeSiteList());
+        global.document = { getElementById: element };
+        global.chrome.runtime.sendMessage = (msg, callback) => {
+            const { sendResponse } = bg.send(msg, bg.fromPopup);
+            if (callback) callback(sendResponse.mock.calls[0]?.[0]);
+        };
+        await require("../src/shared/state").loadState();
+        await require("../src/popup/views/settings").renderSiteLists();
+        return {
+            allowed: element("settings-allowed-sites"),
+            connected: element("settings-connected-sites"),
+            // Click the [x] beside a site, and let what it sends run.
+            remove: async (list, hostname) => {
+                expect(listed(list)).toContain(hostname);
+                const button = list.buttons.find(
+                    (b) => b.dataset.hostname === hostname,
+                );
+                await button.click();
+                await settle();
+            },
+        };
+    }
+
+    afterEach(() => {
+        delete global.document;
+    });
+
+    test("Settings lists a site connected without Remember", async () => {
+        const bg = loadBackground({ actionPopup: true });
+        await connect(bg, FRESH_ORIGIN, false);
+
+        const settings = await openSettings(bg);
+
+        expect(listed(settings.connected)).toEqual(["fresh.example"]);
+        expect(listed(settings.allowed)).toEqual([HOSTNAME]);
+    });
+
+    test("removing a site connected without Remember disconnects it and tells its tabs", async () => {
+        const bg = loadBackground({ actionPopup: true });
+        await connect(bg, FRESH_ORIGIN, false);
+        const sentToTabs = [];
+        global.chrome.tabs = {
+            query: (q, cb) =>
+                cb([
+                    { id: 1, url: FRESH_ORIGIN + "/app" },
+                    { id: 2, url: ORIGIN + "/app" },
+                ]),
+            sendMessage: (tabId, msg, cb) => {
+                sentToTabs.push({ tabId, msg });
+                cb();
+            },
+        };
+        const settings = await openSettings(bg);
+
+        await settings.remove(settings.connected, "fresh.example");
+
+        expect(await siteAccounts(bg)).toEqual({ result: [] });
+        expect(sentToTabs).toEqual([
+            {
+                tabId: 1,
+                msg: {
+                    type: "AUTISTMASK_EVENT",
+                    eventName: "accountsChanged",
+                    data: [],
+                },
+            },
+        ]);
+        expect(listed(settings.connected)).toEqual([]);
+        // The other site is untouched.
+        expect(await siteAccounts(bg, ORIGIN)).toEqual({
+            result: [signer.address],
+        });
+    });
+
+    // The same hostname can hold both kinds of connection: one origin allowed
+    // without Remember, then another, on a different port, allowed with it.
+    test("removing a remembered site also ends its connection made without Remember", async () => {
+        const bg = loadBackground({ actionPopup: true });
+        await connect(bg, FRESH_ORIGIN, false);
+        await connect(bg, FRESH_OTHER_PORT, true);
+        const settings = await openSettings(bg);
+
+        await settings.remove(settings.allowed, "fresh.example");
+
+        expect(await siteAccounts(bg, FRESH_OTHER_PORT)).toEqual({
+            result: [],
+        });
+        expect(await siteAccounts(bg, FRESH_ORIGIN)).toEqual({ result: [] });
+    });
+
+    test("a page can neither remove a site nor list the connected ones", async () => {
+        const bg = loadBackground({ actionPopup: true });
+        await connect(bg, FRESH_ORIGIN, false);
+        const page = { url: FRESH_ORIGIN + "/index.html" };
+
+        const remove = bg.send(
+            { type: "AUTISTMASK_REMOVE_SITE", hostname: "fresh.example" },
+            page,
+        );
+        const list = bg.send({ type: "AUTISTMASK_GET_CONNECTED_SITES" }, page);
+
+        expect(remove.sendResponse).toHaveBeenCalledWith({
+            error: "Unauthorized sender",
+        });
+        expect(list.sendResponse).toHaveBeenCalledWith({
+            error: "Unauthorized sender",
+        });
+        expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
+    });
+});
@@ -0,0 +1,315 @@
+// The recipient line of a contract creation
+// (https://git.eeqj.de/sneak/AutistMask/issues/250).
+//
+// A transaction with no `to` creates a contract. The approval screen, the
+// wait, success and error screens, the transaction detail view and the
+// transaction history rows each say so in a sentence, where they used to show
+// a blank line (an empty address, with a colour dot whose colour was
+// `undefined`) or, on the approval screen, "(contract creation)". A
+// transaction with a real `to` still shows that address.
+//
+// Driven against a minimal DOM stub in the shape
+// tests/typedDataPermit.test.js uses.
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    // The transaction detail view fetches on-chain details after drawing; an
+    // answer that is not ok leaves the drawn lines as they are.
+    debugFetch: async () => ({ ok: false }),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The wait screen polls for a receipt; this one never arrives.
+jest.mock("../src/shared/balances", () => ({
+    getProvider: () => ({ getTransactionReceipt: () => new Promise(() => {}) }),
+    refreshBalances: () => {},
+}));
+
+// The history lists ask the explorer for their transactions and resolve ENS
+// names for them; here the explorer answers with mockHistory and no name
+// resolves.
+let mockHistory = [];
+jest.mock("../src/shared/transactions", () => ({
+    ...jest.requireActual("../src/shared/transactions"),
+    fetchRecentTransactions: async () => mockHistory,
+}));
+jest.mock("../src/shared/ens", () => ({
+    ...jest.requireActual("../src/shared/ens"),
+    resolveEnsNames: async () => new Map(),
+}));
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const { state } = require("../src/shared/state");
+const approval = require("../src/popup/views/approval");
+const txStatus = require("../src/popup/views/txStatus");
+const transactionDetail = require("../src/popup/views/transactionDetail");
+const home = require("../src/popup/views/home");
+const addressDetail = require("../src/popup/views/addressDetail");
+const addressToken = require("../src/popup/views/addressToken");
+
+const SENTENCE =
+    "This transaction creates a new contract. It has no recipient.";
+
+const FROM = "0x0000000000000000000000000000000000000a11";
+const RECIPIENT = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+const TX_HASH =
+    "0x85215772ed26ea8b39c2b3b18779030487efbe0b5fd7e882592b2f62b837be84";
+// Init code for a contract creation's data.
+const INIT_CODE = "0x600160005500";
+
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        value: "",
+        innerHTML: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: (n, force) => {
+                const on = force === undefined ? !classes.has(n) : force;
+                if (on) classes.add(n);
+                else classes.delete(n);
+                return on;
+            },
+        },
+        addEventListener: () => {},
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+// The line a transaction with a real `to` shows: that address, and nothing
+// left over from an empty one.
+function expectAddressLine(html) {
+    expect(html).toContain(RECIPIENT);
+    expect(html).not.toContain(SENTENCE);
+    expect(html).not.toContain("undefined");
+}
+
+beforeEach(() => {
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" } };
+    state.wallets = [];
+    state.trackedTokens = [];
+    state.viewData = {};
+    state.viewStack = [];
+    state.currentView = null;
+    txStatus.init({ doRefreshAndRender: () => {} });
+});
+
+afterEach(() => {
+    txStatus.endWait();
+});
+
+// Open the transaction approval screen the way the popup does: the background
+// hands over the populated transaction and show() draws it.
+async function openTxApproval(to, data) {
+    globalThis.chrome.runtime = {
+        connect: () => ({ postMessage: () => {} }),
+        sendMessage: (msg, reply) => {
+            if (!reply) return;
+            if (msg.type !== "AUTISTMASK_GET_APPROVAL") return reply(null);
+            reply({
+                type: "tx",
+                hostname: "dapp.example",
+                isPhishingDomain: false,
+                approvedFrom: FROM,
+                approvedTx: {
+                    type: 2,
+                    from: FROM,
+                    chainId: "0x1",
+                    nonce: "0x7",
+                    gasLimit: "0x5208",
+                    maxPriorityFeePerGas: "0x3b9aca00",
+                    maxFeePerGas: "0x77359400",
+                    to,
+                    value: "0x0",
+                    data,
+                    accessList: [],
+                },
+            });
+        },
+    };
+    approval.init({});
+    await approval.show(1);
+}
+
+describe("the transaction approval screen", () => {
+    test("a contract creation says so instead of naming a contract", async () => {
+        await openTxApproval(null, INIT_CODE);
+        expect(node("approve-tx-to").innerHTML).toBe(SENTENCE);
+    });
+
+    test("a transaction with a recipient shows its address", async () => {
+        await openTxApproval(RECIPIENT, "0x");
+        expectAddressLine(node("approve-tx-to").innerHTML);
+    });
+});
+
+// approval.js carries a contract creation to these screens with `to` as "".
+describe("the wait, success and error screens", () => {
+    const creation = {
+        to: "",
+        amount: "0.0000",
+        token: "ETH",
+        tokenSymbol: null,
+    };
+    const transfer = { ...creation, to: RECIPIENT };
+
+    test("a contract creation says so on the wait screen", () => {
+        txStatus.showWait(creation, TX_HASH);
+        expect(node("wait-tx-to").innerHTML).toBe(SENTENCE);
+    });
+
+    test("a transaction with a recipient shows its address on the wait screen", () => {
+        txStatus.showWait(transfer, TX_HASH);
+        expectAddressLine(node("wait-tx-to").innerHTML);
+    });
+
+    test("a contract creation says so on the success and error screens", () => {
+        state.viewData = {
+            amount: "0.0000",
+            symbol: "ETH",
+            to: "",
+            hash: TX_HASH,
+            blockNumber: 1,
+        };
+        txStatus.renderSuccess();
+        expect(node("success-tx-to").innerHTML).toBe(SENTENCE);
+
+        txStatus.showError(creation, TX_HASH, "The transaction failed.");
+        expect(node("error-tx-to").innerHTML).toBe(SENTENCE);
+    });
+
+    test("a transaction with a recipient shows its address on the success and error screens", () => {
+        state.viewData = {
+            amount: "0.0050",
+            symbol: "ETH",
+            to: RECIPIENT,
+            hash: TX_HASH,
+            blockNumber: 1,
+        };
+        txStatus.renderSuccess();
+        expectAddressLine(node("success-tx-to").innerHTML);
+
+        txStatus.showError(transfer, TX_HASH, "The transaction failed.");
+        expectAddressLine(node("error-tx-to").innerHTML);
+    });
+});
+
+// A transaction FROM sent, as the history lists hold it. The explorer reports a
+// contract creation with no `to`, which src/shared/transactions.js turns into
+// `to: ""`.
+function historyTx(to) {
+    return {
+        hash: TX_HASH,
+        from: FROM,
+        to,
+        value: "0.0000",
+        exactValue: "0.0",
+        rawAmount: "0",
+        rawUnit: "wei",
+        symbol: "ETH",
+        timestamp: 1790000000,
+        isError: false,
+        directionLabel: "Sent",
+        direction: "sent",
+        contractAddress: null,
+    };
+}
+
+// The detail view is opened with the transaction a history row holds.
+describe("the transaction detail view", () => {
+    test("a contract creation says so", () => {
+        transactionDetail.show(historyTx(""));
+        expect(node("tx-detail-to").innerHTML).toBe(SENTENCE);
+        expect(node("tx-detail-type").textContent).toBe("Contract Creation");
+    });
+
+    test("a transaction with a recipient shows its address", () => {
+        transactionDetail.show(historyTx(RECIPIENT));
+        expectAddressLine(node("tx-detail-to").innerHTML);
+    });
+});
+
+// The same rows are drawn on Home, AddressDetail and AddressToken (for ETH).
+describe.each([
+    ["Home", "home-tx-list", () => home.render({})],
+    ["AddressDetail", "tx-list", () => addressDetail.show()],
+    ["AddressToken", "address-token-tx-list", () => addressToken.show()],
+])("the transaction history on %s", (_name, listId, open) => {
+    async function rowsFor(tx) {
+        mockHistory = [tx];
+        open();
+        // The list is drawn once the history has been fetched.
+        await new Promise((resolve) => setTimeout(resolve, 0));
+        return node(listId).innerHTML;
+    }
+
+    beforeEach(() => {
+        state.wallets = [
+            {
+                name: "Main",
+                type: "key",
+                addresses: [{ address: FROM, balance: "0.0000" }],
+            },
+        ];
+        state.selectedWallet = 0;
+        state.selectedAddress = 0;
+        state.selectedToken = "ETH";
+    });
+
+    test("a contract creation's row says so, with no colour dot and no address line", async () => {
+        const html = await rowsFor(historyTx(""));
+        expect(html).toContain(SENTENCE);
+        expect(html).not.toContain("background:");
+        expect(html).not.toContain("am-address");
+        expect(html).not.toContain("undefined");
+    });
+
+    test("a transaction with a recipient shows its colour dot and address", async () => {
+        const html = await rowsFor(historyTx(RECIPIENT));
+        expectAddressLine(html);
+        expect(html).toContain("background:#");
+        expect(html).toContain(`<div class="am-address">${RECIPIENT}</div>`);
+    });
+});
@@ -407,7 +407,9 @@ describe("deleting without the password", () => {
        expect(saved.activeAddress).toBe(A0);
        expect(saved.selectedWallet).toBe(0);
        expect(saved.selectedAddress).toBe(0);
-        expect(sent).toEqual([]);
+        expect(sent).toEqual([
+            { type: "AUTISTMASK_ADDRESSES_REMOVED", addresses: [B0] },
+        ]);
        // Settings is stubbed, so this is where the route hands over, not
        // where it renders.
        expect(mockSettingsShow).toHaveBeenCalled();
@@ -426,7 +428,10 @@ describe("deleting without the password", () => {
            "Wallet 3",
        ]);
        expect(saved.activeAddress).toBe(B0);
-        expect(sent).toEqual([{ type: "AUTISTMASK_ACTIVE_CHANGED" }]);
+        expect(sent).toEqual([
+            { type: "AUTISTMASK_ADDRESSES_REMOVED", addresses: [A0, A1] },
+            { type: "AUTISTMASK_ACTIVE_CHANGED" },
+        ]);
    });

    test("deleting the last wallet lands on Welcome with nothing left", async () => {
@@ -99,12 +99,13 @@ describe("the flash line the message is shown in", () => {
    // length, including one that wrapped to two lines and pushed the
    // settings view down 12px.
    //
-    // The assertion that actually measures — empty line vs. the message,
-    // real Chromium, documented 360x600 popup — is
-    // "a rejected dust threshold shifts no layout (#233)" in
-    // tests/e2e/run.js, run by make test-e2e. It is not in make check
-    // because REPO_POLICIES.md caps make test at 20 seconds and a browser
-    // suite does not fit; run it before changing the wording.
+    // The line cuts a message too long for it with an ellipsis (see
+    // showFlash() in src/popup/views/helpers.js). The assertions that
+    // measure that, in a real browser at the documented 360x600 popup, are
+    // "a rejected dust threshold shifts no layout (#233)" and "an over-long
+    // flash message keeps to one line (#252)" in tests/e2e/run.js, run by
+    // make test-e2e. They are not in make check because REPO_POLICIES.md
+    // caps make test at 20 seconds and a browser suite does not fit.
    test("reserves its height in the markup", () => {
        const flashLine = POPUP_HTML.match(
            /<div\s+id="flash-msg"\s+class="([^"]*)"/,
@@ -1320,17 +1320,13 @@ async function waitForFilledFlashLine(page) {
 }

 // README, No Layout Shift: the rejection message goes into #flash-msg,
-// whose min-h-[1.25rem] reserves exactly ONE line at text-xs. Reserving
-// the space is not enough on its own — a message too long for one line
-// wraps and pushes everything below it down anyway, which is what the
-// first version of this change shipped: 75 characters, 32px, the settings
-// view and the threshold field 12px lower than with an empty line.
-//
-// So this measures rather than inspects markup. It is the only assertion
-// in the repo that can see the wording grow: the unit suite runs on the
-// node environment with no layout engine, where every height is zero (see
-// the note in tests/dustThreshold.test.js). Lengthen
-// DUST_THRESHOLD_MESSAGE past one line and this test goes red.
+// whose min-h-[1.25rem] reserves exactly ONE line at text-xs, and which
+// cuts a message too long for that line with an ellipsis rather than wrap
+// it. This shows the real message and measures that nothing moves; the
+// test after it does the same with a message several lines long. Both
+// measure rather than inspect markup: the unit suite runs on the node
+// environment with no layout engine, where every height is zero (see the
+// note in tests/dustThreshold.test.js).
 test("a rejected dust threshold shifts no layout (#233)", async (env) => {
    const page = await openPopup(env.ctx, env.popupUrl);
    try {
@@ -1377,11 +1373,11 @@ test("a rejected dust threshold shifts no layout (#233)", async (env) => {
        );
        assert(
            after.flashHeight === before.flashHeight,
-            "the message does not fit the reserved line: " +
+            "the message does not keep to the reserved line: " +
                before.flashHeight +
                "px empty vs " +
                after.flashHeight +
-                "px with the message. Shorten DUST_THRESHOLD_MESSAGE",
+                "px with the message",
        );
        assert(
            after.settingsTop === before.settingsTop,
@@ -1400,6 +1396,134 @@ test("a rejected dust threshold shifts no layout (#233)", async (env) => {
    }
 });

+// ------------------------------------------------ the flash line (#252)
+
+// #flash-msg never wraps: a message too long for its one line is cut with an
+// ellipsis (see showFlash() in src/popup/views/helpers.js). This puts a
+// message several lines long into it and measures that the line and the
+// screen below it stay where they were.
+test("an over-long flash message keeps to one line (#252)", async (env) => {
+    const page = await openPopup(env.ctx, env.popupUrl);
+    try {
+        await page.setViewportSize(POPUP_VIEWPORT);
+        await openSettings(page);
+
+        const before = await page.evaluate(measureFlashLine);
+        const overflows = await page.evaluate(() => {
+            const line = document.getElementById("flash-msg");
+            line.textContent =
+                "This message is far too long for one line. ".repeat(5);
+            return line.scrollWidth > line.clientWidth;
+        });
+        const after = await page.evaluate(measureFlashLine);
+
+        assert(
+            after.flashHeight === before.flashHeight,
+            "the flash line is " +
+                before.flashHeight +
+                "px before and " +
+                after.flashHeight +
+                "px with an over-long message, so it wraps",
+        );
+        assert(
+            after.settingsTop === before.settingsTop,
+            "the settings view moved " +
+                (after.settingsTop - before.settingsTop) +
+                "px when the message appeared",
+        );
+        assert(
+            after.fieldTop === before.fieldTop,
+            "the dust threshold field moved " +
+                (after.fieldTop - before.fieldTop) +
+                "px when the message appeared",
+        );
+        // Checked last: a line that wraps does not run past its right edge,
+        // so this only shows the message really was cut once nothing moved.
+        assert(
+            overflows,
+            "the message fits on the line, so it proves nothing: " +
+                JSON.stringify(after.text),
+        );
+    } finally {
+        await page.close();
+    }
+});
+
+// --------------------------------------- password error containers (#297)
+
+// Every screen that asks for a password reserves room for one line of error.
+// The two on the dApp approval screens also have a border and padding, which
+// that reserved height has to cover too.
+const PASSWORD_ERROR_CONTAINERS = [
+    "approve-tx-error",
+    "approve-sign-error",
+    "export-privkey-flash",
+    "show-phrase-flash",
+    "delete-wallet-flash",
+    "confirm-tx-password-error",
+];
+
+// Shows only the screen holding the container, then measures the container
+// and the element below it empty and again filled the way showError() in
+// src/popup/views/helpers.js fills it. Runs in the page.
+function measurePasswordError(id) {
+    const container = document.getElementById(id);
+    const screen = container.closest(".view");
+    for (const view of document.querySelectorAll(".view")) {
+        view.classList.toggle("hidden", view !== screen);
+    }
+    const below = container.nextElementSibling;
+    const measure = () => ({
+        height: container.getBoundingClientRect().height,
+        belowTop: below.getBoundingClientRect().top + window.scrollY,
+        belowHeight: below.getBoundingClientRect().height,
+    });
+    const empty = measure();
+    container.textContent = "Please enter your password.";
+    container.style.visibility = "visible";
+    const filled = measure();
+    container.textContent = "";
+    container.style.visibility = "hidden";
+    return { empty, filled };
+}
+
+test("a password error moves nothing on any screen (#297)", async (env) => {
+    const page = await openPopup(env.ctx, env.popupUrl);
+    try {
+        await page.setViewportSize(POPUP_VIEWPORT);
+        for (const id of PASSWORD_ERROR_CONTAINERS) {
+            const { empty, filled } = await page.evaluate(
+                measurePasswordError,
+                id,
+            );
+            assert(
+                empty.belowHeight > 0,
+                "nothing is shown below #" + id + ", so nothing was measured",
+            );
+            assert(
+                filled.height === empty.height,
+                "#" +
+                    id +
+                    " is " +
+                    empty.height +
+                    "px empty and " +
+                    filled.height +
+                    "px with an error",
+            );
+            assert(
+                filled.belowTop === empty.belowTop,
+                "the element below #" +
+                    id +
+                    " moved " +
+                    (filled.belowTop - empty.belowTop) +
+                    "px when the error appeared",
+            );
+        }
+    } finally {
+        await page.close();
+    }
+});
+
 // --------------------------------------------- confirmation screen (#238)
 //
 // The screen that decides what gets signed. The arithmetic underneath it
@@ -1414,9 +1538,10 @@ test("a rejected dust threshold shifts no layout (#233)", async (env) => {
 // on opposite sides of the reserve while sitting on the same side of the
 // estimate.

-// The balance the funded fixture serves, and the amounts sent against it.
+// The balance the funded fixture serves, as the Send and confirmation screens
+// show it, and the amounts sent against it.
 const FUNDED_ETH_WEI = 10n ** 18n;
-const FUNDED_ETH_TEXT = "1.0";
+const FUNDED_ETH_TEXT = "1.0000";
 const COMFORTABLE_AMOUNT = "0.1";
 const OVER_BALANCE_AMOUNT = "2.0";

@@ -1430,7 +1555,7 @@ const GAP_AMOUNT = formatEther(FUNDED_ETH_WEI - FEE_ESTIMATE_WEI);
 // fee test: it covers the expected cost to the wei and falls short of the
 // reserve, so the same swap flips this assertion too — through a different
 // balance and a different message than the ETH path uses.
-const TOKEN_BALANCE_TEXT = "1.5";
+const TOKEN_BALANCE_TEXT = "1.5000";
 const TOKEN_AMOUNT = "0.25";
 const OVER_TOKEN_AMOUNT = "9.0";
 const FEE_ONLY_ETH_WEI = FEE_ESTIMATE_WEI;
@@ -1439,16 +1564,15 @@ function toHexWei(wei) {
    return "0x" + wei.toString(16);
 }

-// A fee in wei as the confirmation screen writes it. Deliberately a second
-// implementation of formatFeeEth() from src/popup/views/confirmTx.js rather
-// than an import of it: that module pulls in the whole popup and cannot be
-// required outside a browser, and asserting against an independent rendering
-// is stronger than asserting a function equals itself.
+// A fee in wei as the confirmation screen writes it: truncated to four decimal
+// places (README.md, Display Consistency). Deliberately a second
+// implementation rather than an import of src/shared/amountDisplay.js:
+// asserting against an independent rendering is stronger than asserting a
+// function equals itself. The fixture's fees are above 0.0001 ETH, so the
+// nonzero floor never applies here.
 function feeEth(wei) {
-    const parts = formatEther(wei).split(".");
-    const dec =
-        parts.length > 1 ? parts[1].slice(0, 6).replace(/0+$/, "") || "0" : "0";
-    return parts[0] + "." + dec + " ETH";
+    const [whole, frac = ""] = formatEther(wei).split(".");
+    return whole + "." + (frac + "0000").slice(0, 4) + " ETH";
 }

 // What the confirmation screen is showing right now, read out of the DOM in
@@ -1505,11 +1629,10 @@ async function backToAddress(page) {

 // Drive the popup to the confirmation screen for one send.
 //
-// It waits for the send screen to be showing `balance` before filling
-// anything in. That figure is the exact number the spend gate compares
-// against, so waiting for it — rather than for a refresh to have probably
-// landed — is what keeps every assertion below deterministic after a
-// fixture change.
+// It waits for the send screen to be showing `balance`, the fixture's balance
+// as that screen displays it, before filling anything in. Waiting for it —
+// rather than for a refresh to have probably landed — is what keeps every
+// assertion below deterministic after a fixture change.
 async function goToConfirm(page, { token, balance, amount }) {
    await backToAddress(page);
    await page.click("#btn-send");
@@ -0,0 +1,130 @@
+// The flash line (#252). #flash-msg reserves one line and cuts a message too
+// long for it with an ellipsis; that is measured in a real browser by
+// tests/e2e/run.js. Here: showFlash() keeps the whole message readable in the
+// line's title, and the two add-token screens flash a fixed line, not the text
+// of whatever error adding the token threw.
+
+const ADDRESS = "0x1111111111111111111111111111111111111111";
+
+let elements;
+
+function fakeElement() {
+    return {
+        value: "",
+        textContent: "",
+        title: "",
+        style: {},
+        listeners: {},
+        addEventListener(event, handler) {
+            this.listeners[event] = handler;
+        },
+    };
+}
+
+// Stands in for document.getElementById(): one fake element per id.
+function element(id) {
+    return (elements[id] ||= fakeElement());
+}
+
+beforeEach(() => {
+    jest.resetModules();
+    elements = {};
+    globalThis.document = { getElementById: element };
+    // state.js reads chrome.storage.local at load.
+    globalThis.chrome = {
+        storage: { local: { get: async () => ({}), set: async () => {} } },
+    };
+});
+
+afterEach(() => {
+    jest.dontMock("../src/popup/views/helpers");
+    jest.dontMock("../src/shared/state");
+    jest.dontMock("../src/shared/balances");
+    jest.restoreAllMocks();
+    jest.useRealTimers();
+    delete globalThis.document;
+    delete globalThis.chrome;
+});
+
+test("showFlash() puts the whole message in the title, and clears both", () => {
+    jest.useFakeTimers();
+    const { showFlash } = require("../src/popup/views/helpers");
+
+    showFlash("Saved.");
+    expect(element("flash-msg").textContent).toBe("Saved.");
+    expect(element("flash-msg").title).toBe("Saved.");
+
+    jest.advanceTimersByTime(2000);
+    expect(element("flash-msg").textContent).toBe("");
+    expect(element("flash-msg").title).toBe("");
+});
+
+describe.each([
+    ["addToken", "add-token-address", "btn-add-token-confirm"],
+    [
+        "settingsAddToken",
+        "settings-addtoken-address",
+        "btn-settings-addtoken-manual",
+    ],
+])("adding a token on %s", (view, field, button) => {
+    let flashes;
+    let errors;
+
+    // Clicks the screen's add button with lookupTokenInfo() and saveState()
+    // replaced by the given functions.
+    async function add(lookupTokenInfo, saveState) {
+        flashes = [];
+        errors = jest.spyOn(console, "error").mockImplementation(() => {});
+        jest.spyOn(console, "log").mockImplementation(() => {});
+        jest.doMock("../src/shared/balances", () => ({ lookupTokenInfo }));
+        jest.doMock("../src/shared/state", () => ({
+            state: { trackedTokens: [] },
+            saveState,
+        }));
+        jest.doMock("../src/popup/views/helpers", () => ({
+            $: element,
+            showView: () => {},
+            showFlash: (msg) => flashes.push(msg),
+            escapeHtml: (s) => s,
+            goBack: () => {},
+        }));
+
+        require("../src/popup/views/" + view).init({
+            doRefreshAndRender: () => {},
+        });
+        element(field).value = ADDRESS;
+        await element(button).listeners.click();
+    }
+
+    test("a failed save flashes a fixed line and logs the error", async () => {
+        const detail = "A sentence about the stored record. ".repeat(4);
+
+        await add(
+            async () => ({ symbol: "TKN", decimals: 18, name: "Token" }),
+            async () => {
+                throw new Error(detail);
+            },
+        );
+
+        expect(flashes).toEqual(["Could not add the token."]);
+        expect(errors).toHaveBeenCalledWith(
+            "[AutistMask]",
+            "Adding token failed for",
+            ADDRESS,
+            detail,
+        );
+    });
+
+    test("a contract that is not a token flashes the lookup message", async () => {
+        const detail = "Not a valid ERC-20 token (symbol() failed).";
+
+        await add(
+            async () => {
+                throw new Error(detail);
+            },
+            async () => {},
+        );
+
+        expect(flashes).toEqual([detail]);
+    });
+});
@@ -49,11 +49,12 @@ class StubCustomEvent extends StubEvent {
    }
 }

-// Every code the background emits on the RPC path today, read out of
-// src/background/index.js. The provider must not know this list — it passes
-// through whatever arrived — but the cases below are the real ones.
+// Examples of codes the background emits on the RPC path, read out of
+// src/background/index.js. The provider must not know any list of codes — it
+// passes through whatever arrived — but the cases below are real ones.
 const REJECTED = 4001; // user rejected the request
 const UNAUTHORIZED = 4100; // site not connected / wrong address
+const UNSUPPORTED_METHOD = 4200; // a method the wallet does not implement
 const UNRECOGNIZED_CHAIN = 4902; // switch/add to an unsupported chain

 // A stub window with the four things inpage.js touches: message listeners,
@@ -115,6 +116,41 @@ async function rejectionFrom(start, response) {
    return outcome.error;
 }

+// The reply the real background worker (src/background/index.js) sends for
+// `method`, loaded against just enough of the extension API to receive one
+// RPC message. Same shape as tests/coldWorkerChainId.test.js.
+function backgroundReply(method) {
+    jest.resetModules();
+    jest.doMock("../src/shared/alarms", () => ({
+        BALANCE_REFRESH_ALARM: "balance",
+        BALANCE_REFRESH_PERIOD_MINUTES: 1,
+        ensureRecurringAlarms: async () => {},
+        registerAlarmHandlers: () => {},
+    }));
+
+    let messageListener = null;
+    global.chrome = {
+        runtime: {
+            onMessage: {
+                addListener: (fn) => {
+                    messageListener = fn;
+                },
+            },
+            onConnect: { addListener: () => {} },
+        },
+    };
+
+    require("../src/background/index");
+
+    return new Promise((resolve) => {
+        messageListener(
+            { type: "AUTISTMASK_RPC", method, params: [] },
+            { origin: "https://dapp.example" },
+            resolve,
+        );
+    });
+}
+
 describe("an EIP-1193 code reaches the page", () => {
    test("a user rejection arrives as code 4001", async () => {
        const err = await rejectionFrom(
@@ -164,8 +200,9 @@ describe("an EIP-1193 code reaches the page", () => {
        expect(err.message).toBe(message);
    });

-    // The provider is not allowed to know the list above: a code added to the
-    // background later must reach the page without this file being edited.
+    // The provider is not allowed to know the codes above: any other code,
+    // including one added to the background later, must reach the page
+    // without inpage.js being edited.
    test("a code the provider has never heard of is passed through", async () => {
        const err = await rejectionFrom(
            (p) => p.request({ method: "eth_accounts" }),
@@ -203,6 +240,26 @@ describe("an EIP-1193 code reaches the page", () => {
    });
 });

+// The reply here is the background's own, not one written in this file: it
+// used to carry no code for a method the wallet does not implement
+// (https://git.eeqj.de/sneak/AutistMask/issues/279), so a site probing for an
+// optional method could not tell "not implemented" from "the call failed".
+describe("a method the wallet does not implement", () => {
+    afterEach(() => {
+        delete global.chrome;
+    });
+
+    test("reaches the page as code 4200", async () => {
+        const method = "wallet_noSuchMethod";
+        const err = await rejectionFrom(
+            (p) => p.request({ method }),
+            await backgroundReply(method),
+        );
+        expect(err.code).toBe(UNSUPPORTED_METHOD);
+        expect(err.message).toBe("Unsupported method: " + method);
+    });
+});
+
 describe("the message is untouched", () => {
    test("a coded error keeps the message byte for byte", async () => {
        const message =
@@ -0,0 +1,452 @@
+// The balance and fee lines of the Send and confirmation screens, and the fee
+// line they must share with the approval screen.
+//
+// An ETH balance, a token balance or a fee below 0.000001 rendered as zero on
+// these screens (https://git.eeqj.de/sneak/AutistMask/issues/343): the stored
+// balances and the fee were each cut to six decimal places, a rule of their
+// own, and a token holding cut to zero was dropped, while the approval screen
+// showed the same fee through src/shared/amountDisplay.js with the nonzero
+// floor. The balances are now stored exactly, every nonzero token holding
+// kept, and the screens show them and the fee through that helper.
+//
+// Driven through the real refreshBalances(), Send screen, confirmation screen
+// and approval screen, with only the node, the explorer and the DOM stubbed: a
+// balance written onto state by hand would skip the place the cut happened.
+
+"use strict";
+
+// What the stub node answers. Each test sets what it needs.
+const mockNode = {
+    balanceWei: 0n,
+    feeData: { maxFeePerGas: 1n, gasPrice: 1n },
+};
+
+// The token rows the stub explorer reports for the address.
+const mockExplorer = { items: [] };
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        async getBalance() {
+            return mockNode.balanceWei;
+        }
+        async lookupAddress() {
+            return null;
+        }
+        async getFeeData() {
+            return mockNode.feeData;
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getCode() {
+            return "0x";
+        }
+        async getTransactionCount() {
+            return 1;
+        }
+    }
+    return {
+        ...actual,
+        JsonRpcProvider: StubProvider,
+        Network: { from: () => ({}) },
+    };
+});
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    // The explorer's token list, which refreshBalances() also fetches.
+    debugFetch: jest.fn(async () => ({
+        ok: true,
+        status: 200,
+        json: async () => mockExplorer.items,
+    })),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The confirmation screen's Etherscan label lookup is the only fetch() these
+// screens make; it fails, as it does offline.
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+// The approval the background hands the approval screen. Set per test.
+let approvalDetails = null;
+
+const { makeStorageStub } = require("./support/storageStub");
+global.chrome = {
+    storage: makeStorageStub(),
+    runtime: {
+        connect: () => ({
+            postMessage() {},
+            disconnect() {},
+            onDisconnect: { addListener() {} },
+        }),
+        sendMessage(message, callback) {
+            callback(
+                message.type === "AUTISTMASK_GET_APPROVAL"
+                    ? approvalDetails
+                    : undefined,
+            );
+        },
+    },
+};
+
+// A stub DOM: every id resolves to a recording element.
+const elements = new Map();
+
+function makeEl(id) {
+    const handlers = new Map();
+    return {
+        id,
+        textContent: "",
+        innerHTML: "",
+        value: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add() {},
+            remove() {},
+            toggle() {},
+            contains: () => false,
+        },
+        handlers,
+        children: [],
+        addEventListener(name, fn) {
+            handlers.set(name, fn);
+        },
+        appendChild(child) {
+            this.children.push(child);
+            return child;
+        },
+        querySelectorAll: () => [],
+        querySelector: () => null,
+        remove() {},
+        focus() {},
+    };
+}
+
+global.document = {
+    getElementById(id) {
+        if (!elements.has(id)) elements.set(id, makeEl(id));
+        return elements.get(id);
+    },
+    createElement: (tag) => makeEl(tag),
+    body: { prepend() {}, appendChild() {} },
+    addEventListener() {},
+};
+global.navigator = { clipboard: { writeText() {} } };
+
+const { refreshBalances } = require("../src/shared/balances");
+const { state } = require("../src/shared/state");
+const {
+    prices,
+    clearPrices,
+    formatAddressTotal,
+    getAddressValue,
+} = require("../src/shared/prices");
+const send = require("../src/popup/views/send");
+const confirmTx = require("../src/popup/views/confirmTx");
+const approval = require("../src/popup/views/approval");
+const {
+    addressHoldsFunds,
+    balanceLinesForAddress,
+} = require("../src/popup/views/helpers");
+
+const HOLDER = "0x" + "a".repeat(40);
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+
+// 0.0000005 ETH, or 0.0000005 of an 18-decimal token.
+const HALF_MICRO_ETH = 500000000000n;
+
+// A token the bundled list does not know.
+const TOKEN = "0x" + "d".repeat(40);
+
+// The explorer's row for TOKEN, holding `value` base units. With only five
+// holders, it is listed only when the user tracks the token.
+function tokenRow(value, token = {}) {
+    return {
+        value: String(value),
+        token: {
+            type: "ERC-20",
+            address_hash: TOKEN,
+            symbol: "TOK",
+            name: "Token",
+            decimals: "18",
+            holders_count: "5",
+            ...token,
+        },
+    };
+}
+
+function text(id) {
+    return global.document.getElementById(id).textContent;
+}
+
+function errors() {
+    return global.document.getElementById("confirm-errors").innerHTML;
+}
+
+// The ETH balance the node reports and the token rows the explorer reports,
+// fetched and stored exactly where the popup stores them.
+async function refreshWith(balanceWei, tokenItems = []) {
+    mockNode.balanceWei = balanceWei;
+    mockExplorer.items = tokenItems;
+    state.wallets = [{ name: "Wallet 1", addresses: [{ address: HOLDER }] }];
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    await refreshBalances(
+        state.wallets,
+        "https://rpc.example.invalid",
+        "https://blockscout.example/api/v2",
+        state.trackedTokens,
+        "mainnet",
+    );
+}
+
+// Press Review on the Send screen for a send of `token` ("ETH" or a token
+// address), and show the confirmation screen it leads to with its fee estimate
+// settled.
+async function confirmSend(amount, token = "ETH") {
+    let txInfo = null;
+    send.init({ showConfirmTx: (info) => (txInfo = info) });
+    state.selectedToken = token;
+    global.document.getElementById("send-to").value = RECIPIENT;
+    global.document.getElementById("send-amount").value = amount;
+    await global.document
+        .getElementById("btn-send-review")
+        .handlers.get("click")();
+    confirmTx.show(txInfo);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+// The approval screen for a dApp transaction of 21000 gas, the gas the stub
+// node estimates for the send above.
+async function approveTxWithFeePerGas(maxFeePerGas) {
+    approvalDetails = {
+        type: "tx",
+        hostname: "dapp.example",
+        approvedFrom: HOLDER,
+        approvedTx: {
+            to: RECIPIENT,
+            value: "0",
+            data: "0x",
+            chainId: "0x1",
+            gasLimit: "21000",
+            maxFeePerGas: String(maxFeePerGas),
+            nonce: 0,
+        },
+    };
+    await approval.show("1");
+}
+
+beforeEach(() => {
+    elements.clear();
+    state.selectedToken = null;
+    state.trackedTokens = [];
+    state.fraudContracts = [];
+    state.currentView = null;
+    mockNode.feeData = { maxFeePerGas: 1n, gasPrice: 1n };
+});
+
+describe("an ETH balance below 0.000001 never renders as zero", () => {
+    test("on the Send screen", async () => {
+        await refreshWith(HALF_MICRO_ETH);
+        state.selectedToken = "ETH";
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 0.0000005 ETH");
+    });
+
+    test("on the confirmation screen", async () => {
+        await refreshWith(HALF_MICRO_ETH);
+        await confirmSend("0.0000001");
+        expect(text("confirm-balance")).toBe("0.0000005 ETH");
+    });
+
+    test("while a balance above the floor keeps four decimals", async () => {
+        await refreshWith(1234567890000000000n);
+        await confirmSend("0.1");
+        expect(text("confirm-balance")).toBe("1.2345 ETH");
+    });
+});
+
+// A token the user tracks stays on the balance list when the explorer's row is
+// dropped, so a holding of it below 0.000001 reached these screens as zero, and
+// the send was checked against zero.
+describe("a tracked token holding below 0.000001 never renders as zero", () => {
+    beforeEach(() => {
+        state.trackedTokens = [
+            { address: TOKEN, symbol: "TOK", name: "Token", decimals: 18 },
+        ];
+    });
+
+    test("on the Send screen", async () => {
+        await refreshWith(10n ** 18n, [tokenRow(HALF_MICRO_ETH)]);
+        state.selectedToken = TOKEN;
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 0.0000005 TOK");
+    });
+
+    test("on the confirmation screen, which checks the send against it", async () => {
+        await refreshWith(10n ** 18n, [tokenRow(HALF_MICRO_ETH)]);
+        await confirmSend("0.0000005", TOKEN);
+        expect(text("confirm-balance")).toBe("0.0000005 TOK");
+        expect(errors()).toBe("");
+        await confirmSend("0.0000006", TOKEN);
+        expect(errors()).toContain(
+            "You have 0.0000005 TOK but are trying to send 0.0000006 TOK.",
+        );
+    });
+
+    // The stored balance keeps all 24 places, and the balance check reads the
+    // first 18 of them rather than refusing it as no balance at all.
+    test("with more than 18 decimals, the send is checked against 18 of them", async () => {
+        state.trackedTokens[0].decimals = 24;
+        // 1.5 plus one base unit.
+        const value = 15n * 10n ** 23n + 1n;
+        await refreshWith(10n ** 18n, [tokenRow(value, { decimals: "24" })]);
+        await confirmSend("1.5", TOKEN);
+        expect(text("confirm-balance")).toBe("1.5000 TOK");
+        expect(errors()).toBe("");
+    });
+
+    test("with more than 18 decimals and a holding below 10^-18", async () => {
+        state.trackedTokens[0].decimals = 24;
+        // One base unit, 0.000000000000000000000001 TOK.
+        await refreshWith(10n ** 18n, [tokenRow(1n, { decimals: "24" })]);
+        state.selectedToken = TOKEN;
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe(
+            "Current balance: 0.000000000000000000000001 TOK",
+        );
+        await confirmSend("0.000000000000000001", TOKEN);
+        expect(text("confirm-balance")).toBe("0.000000000000000000000001 TOK");
+        expect(errors()).toContain(
+            "You have 0.000000000000000000000001 TOK but are trying to send" +
+                " 0.000000000000000001 TOK.",
+        );
+    });
+});
+
+// A token the user does not track, with enough holders to be admitted. The
+// balance fetch dropped a holding of it below 0.000001, but the token stays
+// selected while its own screen is open: after sending 2 of a 2.0000003
+// holding, the user is back on that screen, and Send read the missing row as
+// zero.
+describe("an untracked token holding below 0.000001 never renders as zero", () => {
+    const row = () => tokenRow(HALF_MICRO_ETH, { holders_count: "50000" });
+
+    test("on the Send screen", async () => {
+        await refreshWith(10n ** 18n, [row()]);
+        state.selectedToken = TOKEN;
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 0.0000005 TOK");
+    });
+
+    test("on the confirmation screen, which checks the send against it", async () => {
+        await refreshWith(10n ** 18n, [row()]);
+        await confirmSend("0.0000005", TOKEN);
+        expect(text("confirm-balance")).toBe("0.0000005 TOK");
+        expect(errors()).toBe("");
+        await confirmSend("0.0000006", TOKEN);
+        expect(errors()).toContain(
+            "You have 0.0000005 TOK but are trying to send 0.0000006 TOK.",
+        );
+    });
+});
+
+// The fetch keeps every holding, so the screens that showed only what it kept
+// leave out a holding below 0.000001 themselves, and look as they did.
+describe("a token holding below 0.000001 is still not listed", () => {
+    afterEach(() => {
+        clearPrices();
+    });
+
+    test("for a token the user does not track", async () => {
+        prices.ETH = 3000;
+        await refreshWith(0n, [
+            tokenRow(HALF_MICRO_ETH, { holders_count: "50000" }),
+        ]);
+        const addr = state.wallets[0].addresses[0];
+        expect(balanceLinesForAddress(addr, [], true)).not.toContain(TOKEN);
+        expect(balanceLinesForAddress(addr, [], false)).not.toContain(TOKEN);
+        send.renderSendTokenSelect(addr);
+        const options = global.document.getElementById("send-token").children;
+        expect(options.map((o) => o.value)).toEqual([]);
+        // Not an unpriced token in the total, and not funds on the
+        // remove-address warning.
+        expect(formatAddressTotal(getAddressValue(addr))).toBe("Total: $0.00");
+        expect(addressHoldsFunds(addr)).toBe(false);
+    });
+
+    // As a tracked token holding nothing: listed only while zero balances are
+    // shown.
+    test("for a tracked token, unless zero balances are shown", async () => {
+        state.trackedTokens = [
+            { address: TOKEN, symbol: "TOK", name: "Token", decimals: 18 },
+        ];
+        await refreshWith(0n, [tokenRow(HALF_MICRO_ETH)]);
+        const addr = state.wallets[0].addresses[0];
+        expect(
+            balanceLinesForAddress(addr, state.trackedTokens, false),
+        ).not.toContain(TOKEN);
+        expect(
+            balanceLinesForAddress(addr, state.trackedTokens, true),
+        ).toContain(`data-token="${TOKEN}"`);
+    });
+});
+
+describe("a fee below 0.000001 ETH never renders as zero", () => {
+    test("when the estimate and the reserve are the same", async () => {
+        await refreshWith(10n ** 18n);
+        await confirmSend("0.1");
+        // 21000 gas at 1 wei is 0.000000000000021 ETH, shown to its first
+        // significant digit.
+        expect(text("confirm-fee-amount")).toBe("0.00000000000002 ETH");
+    });
+
+    test("when they differ, on both lines", async () => {
+        mockNode.feeData = { maxFeePerGas: 2n, gasPrice: 1n };
+        await refreshWith(10n ** 18n);
+        await confirmSend("0.1");
+        expect(text("confirm-fee-amount")).toBe("~0.00000000000002 ETH");
+        expect(text("confirm-fee-reserve")).toBe(
+            "up to 0.00000000000004 ETH reserved",
+        );
+    });
+});
+
+// The confirmation screen shows the reserve alone when the node quotes no
+// cheaper estimate, and that reserve is the same gas limit times maximum fee
+// per gas that the approval screen calls the max fee. An ETH price is set, as
+// it is on mainnet, so the USD value has to match too.
+describe("the same fee reads the same on the confirmation and approval screens", () => {
+    beforeEach(() => {
+        prices.ETH = 3000;
+    });
+    afterEach(() => {
+        clearPrices();
+    });
+
+    test.each([
+        // 21000 gas at 1 wei.
+        ["below the floor", 1n, "0.00000000000002 ETH (< $0.01)"],
+        // 0.001235294117631 ETH, which is $3.71. Pricing the truncated
+        // 0.0012 instead would read $3.60.
+        ["with more than four decimals", 58823529411n, "0.0012 ETH ($3.71)"],
+    ])("%s", async (_label, feePerGas, expected) => {
+        mockNode.feeData = { maxFeePerGas: feePerGas, gasPrice: feePerGas };
+        await refreshWith(10n ** 18n);
+        await confirmSend("0.1");
+        expect(text("confirm-fee-amount")).toBe(expected);
+        await approveTxWithFeePerGas(feePerGas);
+        expect(text("approve-tx-fee")).toBe(expected);
+    });
+});
@@ -5,6 +5,8 @@ const ROUTER_ADDR = "0x66a9893cc07d91d95644aedd05d03f95e1dba8af";
 const USDT_ADDR = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
 const WETH_ADDR = "0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2";
 const USDC_ADDR = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
+const DAI_ADDR = "0x6B175474E89094C44Da98b954EedeAC495271d0F";
+const SEPOLIA_WETH_ADDR = "0xfFf9976782d46CC05630D1f6eBAb18b2324d6B14";
 const USER_ADDR = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";

 // AutistMask's first-ever swap, 2026-02-27.
@@ -75,6 +77,14 @@ function encodeV2SwapExactIn(recipient, amountIn, amountOutMin, pathAddrs) {
    );
 }

+// Helper: encode a V2_SWAP_EXACT_OUT input (command 0x09)
+function encodeV2SwapExactOut(recipient, amountOut, amountInMax, pathAddrs) {
+    return coder.encode(
+        ["address", "uint256", "uint256", "address[]", "bool"],
+        [recipient, amountOut, amountInMax, pathAddrs, true],
+    );
+}
+
 // Helper: encode a V3_SWAP_EXACT_IN input (command 0x00)
 function encodeV3SwapExactIn(recipient, amountIn, amountOutMin, pathTokens) {
    // V3 path: token(20) + fee(3) + token(20) ...
@@ -223,6 +233,233 @@ describe("uniswap decoder", () => {
        expect(minOut.value).toContain("WETH");
    });

+    // Buy exactly 0.5 WETH for at most 1,500 USDC, paid by the user, sent to
+    // the caller (the router's MSG_SENDER recipient, address(1)).
+    test("decodes V2_SWAP_EXACT_OUT, stating the input amount as a maximum", () => {
+        const data = buildExecute(
+            "0x09", // V2_SWAP_EXACT_OUT
+            [
+                encodeV2SwapExactOut(
+                    "0x0000000000000000000000000000000000000001",
+                    500000000000000000n, // amountOut: 0.5 WETH
+                    1500000000n, // amountInMax: 1,500 USDC (6 decimals)
+                    [USDC_ADDR, WETH_ADDR],
+                ),
+            ],
+            1767225600n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result.name).toBe("Swap USDC → WETH");
+        expect(detail(result, "Token In").address).toBe(USDC_ADDR);
+        expect(detail(result, "Token Out").address).toBe(WETH_ADDR);
+
+        // The wait, success and error screens show rawValue as the amount, so
+        // it says "Up to" as well.
+        const amount = detail(result, "Amount");
+        expect(amount.value).toBe("Up to 1500.0000 USDC");
+        expect(amount.rawValue).toBe("Up to 1500.0000");
+
+        expect(detail(result, "Min. received").value).toBe("0.5000 WETH");
+    });
+
+    // Buy exactly 1,500 USDC for at most 0.5 ETH: WRAP_ETH of the maximum, the
+    // swap, then UNWRAP_WETH of 0, which returns the ETH the swap did not spend.
+    test("a V2 exact-out swap paid in ETH shows the token it buys and a maximum", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8", "uint8"], [0x0b, 0x09, 0x0c]),
+            [
+                encodeWrapEth(ROUTER_ADDR, 500000000000000000n),
+                encodeV2SwapExactOut(
+                    USER_ADDR,
+                    1500000000n, // amountOut: 1,500 USDC
+                    500000000000000000n, // amountInMax: 0.5 WETH
+                    [WETH_ADDR, USDC_ADDR],
+                ),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH same encoding
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result.name).toBe("Swap ETH → USDC");
+
+        const amount = detail(result, "Amount");
+        expect(amount.value).toBe("Up to 0.5000 ETH");
+        expect(amount.rawValue).toBe("Up to 0.5000");
+
+        expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
+        expect(detail(result, "Min. received").value).toBe("1500.0000 USDC");
+    });
+
+    // Buy exactly 0.5 ETH for at most 1,500 USDC under a permit: the swap buys
+    // WETH and UNWRAP_WETH turns it into ETH.
+    test("a V2 exact-out swap that buys ETH shows ETH and the permit as a maximum", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8", "uint8"], [0x0a, 0x09, 0x0c]),
+            [
+                encodePermit2(USDC_ADDR, 1500000000n, ROUTER_ADDR),
+                encodeV2SwapExactOut(
+                    ROUTER_ADDR,
+                    500000000000000000n, // amountOut: 0.5 WETH
+                    1500000000n, // amountInMax: 1,500 USDC
+                    [USDC_ADDR, WETH_ADDR],
+                ),
+                encodeWrapEth(USER_ADDR, 500000000000000000n), // UNWRAP_WETH
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result.name).toBe("Swap USDC → ETH");
+        expect(detail(result, "Amount").value).toBe("Up to 1500.0000 USDC");
+        expect(detail(result, "Token Out").value).toBe("ETH");
+        expect(detail(result, "Min. received").value).toBe("0.5000 ETH");
+    });
+
+    // Paid in a token, an UNWRAP_WETH of 0 after a swap that buys something
+    // other than WETH leaves the output side as it is: Token Out and Min.
+    // received are the token bought and its figure, not ETH.
+    test.each([
+        {
+            paidIn: "WETH",
+            tokenIn: WETH_ADDR,
+            amountInMax: 500000000000000000n, // 0.5 WETH
+            tokenOut: USDC_ADDR,
+            amountOut: 1300000000n, // 1,300 USDC
+            minReceived: "1300.0000 USDC",
+        },
+        {
+            paidIn: "USDC",
+            tokenIn: USDC_ADDR,
+            amountInMax: 8000000n, // 8 USDC
+            tokenOut: DAI_ADDR,
+            amountOut: 7000000000000000000n, // 7 DAI
+            minReceived: "7.0000 DAI",
+        },
+    ])(
+        "a V2 exact-out swap paid in $paidIn, then UNWRAP_WETH, shows the token it buys",
+        ({ tokenIn, amountInMax, tokenOut, amountOut, minReceived }) => {
+            const data = buildExecute(
+                solidityPacked(["uint8", "uint8", "uint8"], [0x0a, 0x09, 0x0c]),
+                [
+                    encodePermit2(tokenIn, amountInMax, ROUTER_ADDR),
+                    encodeV2SwapExactOut(USER_ADDR, amountOut, amountInMax, [
+                        tokenIn,
+                        tokenOut,
+                    ]),
+                    encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH
+                ],
+                9999999999n,
+            );
+
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(detail(result, "Token Out").address).toBe(tokenOut);
+            expect(detail(result, "Min. received").value).toBe(minReceived);
+        },
+    );
+
+    // An exact-in swap is held to the same rule: buying USDC, then UNWRAP_WETH,
+    // receives USDC.
+    test("an exact-in swap to a token other than WETH, then UNWRAP_WETH, shows that token", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x08, 0x0c]),
+            [
+                encodeV2SwapExactIn(USER_ADDR, 2000000n, 1900000n, [
+                    USDT_ADDR,
+                    USDC_ADDR,
+                ]),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result.name).toBe("Swap USDT → USDC");
+        expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
+        expect(detail(result, "Min. received").value).toBe("1.9000 USDC");
+    });
+
+    // Paid in ETH, with an exact-out step, the last swap step buys WETH, so
+    // UNWRAP_WETH makes the output ETH.
+    test("an ETH-paid swap whose last step buys WETH, then UNWRAP_WETH, shows ETH", () => {
+        const data = buildExecute(
+            solidityPacked(
+                ["uint8", "uint8", "uint8", "uint8"],
+                [0x0b, 0x09, 0x08, 0x0c],
+            ),
+            [
+                encodeWrapEth(ROUTER_ADDR, 500000000000000000n),
+                encodeV2SwapExactOut(
+                    ROUTER_ADDR,
+                    1500000000n, // amountOut: 1,500 USDC
+                    500000000000000000n, // amountInMax: 0.5 WETH
+                    [WETH_ADDR, USDC_ADDR],
+                ),
+                encodeV2SwapExactIn(
+                    ROUTER_ADDR,
+                    1500000000n, // amountIn: 1,500 USDC
+                    400000000000000000n, // amountOutMin: 0.4 WETH
+                    [USDC_ADDR, WETH_ADDR],
+                ),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(detail(result, "Token Out").value).toBe("ETH");
+        expect(detail(result, "Min. received").value).toBe("0.4000 ETH");
+    });
+
+    // Sepolia's WETH is a different contract; UNWRAP_WETH makes it ETH too.
+    test("a swap to Sepolia WETH, then UNWRAP_WETH, shows ETH", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x08, 0x0c]),
+            [
+                encodeV2SwapExactIn(USER_ADDR, 1000000n, 500000000000000n, [
+                    USDC_ADDR,
+                    SEPOLIA_WETH_ADDR,
+                ]),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(detail(result, "Token Out").value).toBe("ETH");
+        expect(detail(result, "Min. received").value).toBe("0.0005 ETH");
+    });
+
+    // A step that states a Min. received figure but names no output token has
+    // set the output side, so UNWRAP_WETH does not make it ETH: nothing says
+    // the figure is counted in WETH.
+    test("a step with a minimum but no output token, then UNWRAP_WETH, names no token", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x10, 0x0c]),
+            [
+                encodeV4Swap(new Uint8Array([V4_SWAP_EXACT_IN]), [
+                    encodeV4ExactIn(
+                        USDC_ADDR,
+                        [], // no path: this step names no output currency
+                        1000000000n, // 1,000 USDC
+                        400000000000000000n, // amountOutMin
+                    ),
+                ]),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(detail(result, "Token Out").value).toBe(
+            "Unknown (not named in the calldata)",
+        );
+        expect(detail(result, "Min. received").value).toBe(
+            "400000000000000000 base units (decimals unknown)",
+        );
+    });
+
    test("decodes V3_SWAP_EXACT_IN with known tokens", () => {
        const data = buildExecute(
            "0x00", // V3_SWAP_EXACT_IN
@@ -382,14 +382,62 @@ describe("a scale the explorer's own rows disagree about", () => {
        );
    });

+    // https://git.eeqj.de/sneak/AutistMask/issues/377. The Send screen read the
+    // stored balance and said "5.0000 NOVEL", the confirmation screen it leads
+    // to said "unknown (NOVEL)", and the fee message asked the user to go back
+    // and try again, which cannot supply a scale.
+    test("reads the same on the Send screen and the confirmation screen, and the fee message names the scale", async () => {
+        await fetchOntoBoth([novel("6", 5000000n)], [novel("18", FIVE_WETH)]);
+        state.selectedToken = NOVEL;
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: unknown (NOVEL)");
+
+        const txInfo = await reviewSend(NOVEL, "1.5");
+        confirmTx.show(txInfo);
+        await settle();
+        expect(text("confirm-balance")).toBe("unknown (NOVEL)");
+        expect(text("confirm-fee-unknown-error")).toBe(
+            "The network fee could not be estimated, because this wallet" +
+                " does not know how many decimal places this token uses, so" +
+                " this transaction cannot be sent.",
+        );
+        expect(el("confirm-fee-unknown-error").style.visibility).toBe(
+            "visible",
+        );
+    });
+
+    test("while a fee that fails for any other reason keeps its retry", async () => {
+        await fetchOntoBoth([novel("6", 5000000n)], [novel("6", 5000000n)]);
+        const txInfo = await reviewSend(NOVEL, "1.5");
+        const getFeeData = mockProvider.getFeeData;
+        mockProvider.getFeeData = async () => {
+            throw new Error("the node did not answer");
+        };
+        try {
+            confirmTx.show(txInfo);
+            await settle();
+        } finally {
+            mockProvider.getFeeData = getFeeData;
+        }
+        expect(text("confirm-fee-amount")).toBe("Unable to estimate");
+        expect(text("confirm-fee-unknown-error")).toBe(
+            "The network fee could not be estimated, so this transaction" +
+                " cannot be checked against your balance. Please go back and" +
+                " try again.",
+        );
+    });
+
    test("while agreeing rows leave the scale usable", async () => {
        await fetchOntoBoth([novel("6", 5000000n)], [novel("6", 5000000n)]);
+        state.selectedToken = NOVEL;
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 5.0000 NOVEL");
        const txInfo = await reviewSend(NOVEL, "1.5");
        expect(txInfo.tokenDecimals).toBe(6);
        expect(txInfo.tokenBalance).toBe("5.0");
        confirmTx.show(txInfo);
        await settle();
-        expect(text("confirm-balance")).toBe("5.0 NOVEL");
+        expect(text("confirm-balance")).toBe("5.0000 NOVEL");
        expect(errors()).toBe("");
        expect(sendDisabled()).toBe(false);
    });
@@ -431,7 +479,7 @@ describe("the confirmation screen tells an unknown balance from a zero one", ()
        const zero = await render("0.0");
        expect(unknown.balance).not.toBe(zero.balance);
        expect(unknown.balance).toBe("unknown (NOVEL)");
-        expect(zero.balance).toBe("0.0 NOVEL");
+        expect(zero.balance).toBe("0.0000 NOVEL");
    });

    // Both hit INSUFFICIENT_TOKEN — an unknown balance is treated as nothing to
@@ -443,7 +491,7 @@ describe("the confirmation screen tells an unknown balance from a zero one", ()
        expect(unknown.errors).not.toBe(zero.errors);
        expect(unknown.errors).toContain("This token&#39;s balance is unknown");
        expect(unknown.errors).not.toContain("You have");
-        expect(zero.errors).toContain("You have 0.0 NOVEL");
+        expect(zero.errors).toContain("You have 0.0000 NOVEL");
        expect(zero.errors).not.toContain("balance is unknown");
    });
 });
Author	SHA1	Message	Date
clawbot	45f11ee920	fix: say an unknown-scale balance the same way on Send and on confirm (closes #377 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details When two addresses' explorer reports disagree on a token's decimals, the Send screen showed the stored figure while the confirmation screen said the balance was unknown. One function in send.js now gives both the balance and scale, so both read `unknown (SYMBOL)`. The confirmation screen's fee-unknown message names its cause: for an unknown scale it says the wallet does not know the token's decimal places and the transaction cannot be sent, instead of asking for a retry that cannot help. Other causes keep the old sentence. Model: opus-5-5	2026-10-04 15:59:15 +02:00
clawbot	a68f30c480	fix: decode Uniswap V2 exact-out swaps, input amount shown as a maximum (closes #283 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details decode() had no arm for Universal Router command 0x09, so the approval screen showed no token or amount for it. It now takes the path's first token and amountInMax as the input side, the last token and amountOut as the output side. With such a step, the Amount figure reads "Up to <amount>" whichever step set it, on the approval, wait, success and error screens, unless it reads "Unlimited", as an unbounded PERMIT2_PERMIT does, or "All available (V4 open delta)". In every swap, UNWRAP_WETH makes Token Out ETH only when the output side is WETH, on mainnet or Sepolia, or no step set it; otherwise the output keeps its own token and figure. decodeV2SwapExactOut() loses its eslint-disable comment. Model: opus-5-5	2026-10-04 15:09:09 +02:00
clawbot	43c236451f	chore: run jest in three worker processes (closes #426 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details The test and test:verbose scripts ran jest with one worker per CPU core, about 47 processes and 7-8 GiB per run on the shared 48-core build host. They now pass --maxWorkers=3. On that host the suite takes 23-29s, inside the unchanged 30-second cap in script/test but not by much: one test file, tests/persistedFieldContract.test.js, takes most of it. One or two workers went past the cap, so this departs from the issue's two-process limit. make check, the pre-commit hook and script/cibuild all reach jest through these scripts; the timings in the script/test and Dockerfile comments are updated to match. Model: opus-5-5	2026-10-04 14:26:03 +02:00
clawbot	1247c24c4d	fix: keep the dApp approval error containers to their reserved height (closes #297 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details #approve-tx-error and #approve-sign-error reserved 20px, but their border and padding took 10px of it, so a one-line error grew them to 26px and pushed the Confirm/Sign buttons down 6px. They now reserve 30px, the same 4px to spare over one line that the other password error containers have. A new end-to-end test shows each of the six password error containers on its own screen at the popup viewport, empty and then with an error, and fails if one changes height or the element below it moves. Model: opus-5-5	2026-10-04 12:58:26 +02:00
clawbot	bec20aa2bb	fix: say a contract creation has no recipient instead of a blank line (closes #250 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details A transaction with no `to` showed a blank address, with a colour dot whose colour was `undefined`, on the wait, success and error screens, the transaction detail view and the history rows on Home, AddressDetail and AddressToken. The approval screen showed "(contract creation)". All of them now say "This transaction creates a new contract. It has no recipient." The three history lists draw a row's counterparty lines through one helper in helpers.js. A transaction with a real `to` is unchanged. The new test drives each screen and list both ways. Model: opus-5-5	2026-10-04 12:24:39 +02:00
clawbot	467b849a13	fix: show balances and fees below 0.000001 as nonzero on the send screens (closes #343 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details The stored ETH and token balances and the send-confirm screen's fee were each cut to six decimal places, and a token holding cut to zero was dropped, so a value below 0.000001 read as zero. Balances are now stored exactly, whatever decimals a token declares, and every nonzero token holding is kept; the balance check reads a token balance to its first 18 places. The balance lists, the send-screen token selector, the address total and the remove-address warning leave out a holding below 0.000001 themselves, through isBelowOneMillionth(). The send and send-confirm screens' balances, reserve and insufficient-balance messages go through truncateAmountNeverZero(). The send-confirm and approval screens both render the fee through formatFee(), which prices the exact fee in USD. Model: opus-5-5	2026-10-04 11:07:37 +02:00
clawbot	5bf8b5ff1f	fix: keep the flash line to its one line at any message length (closes #252 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details The flash line reserves one line, so a message that wrapped pushed the screen below it down. #flash-msg no longer wraps: text too long for it is cut with an ellipsis, and showFlash() puts the whole message in its title. Every message is also reworded to at most 50 characters so none is cut, and the add-token screens flash a fixed line for any error other than the two lookup messages, logging the detail. A new end-to-end test writes a message several lines long into the line and fails if the line or the screen below it moves. Model: opus-5-5	2026-10-04 10:22:51 +02:00
clawbot	4b62e31e80	fix: refuse an unsupported method with EIP-1193 code 4200 (closes #279 ) check / check (push) Waiting to run Details e2e / e2e-chrome (push) Waiting to run Details e2e / e2e-firefox (push) Waiting to run Details handleRpc() answered a method it does not implement with "Unsupported method: <method>" and no code, so a site probing for an optional method could not tell "not implemented" from "the call failed" and fall back. It now carries code 4200, which EIP-1193 defines for this case; the message is unchanged. The provider already passes any code through to the page. The new test hands the real background's reply to the provider and checks the page sees 4200. Model: opus-5-5	2026-10-04 09:24:41 +02:00
clawbot	49a7da87e8	harden: list and end site connections made without Remember in Settings (closes #406 ) check / check (push) Successful in 2m25s Details e2e / e2e-chrome (push) Successful in 3m15s Details e2e / e2e-firefox (push) Successful in 2m21s Details A site allowed without "Remember" lives only in the background's in-memory connectedSites map. Settings never listed it, and AUTISTMASK_REMOVE_SITE, sent on every remove, did nothing, so the user could not end such a connection. Settings now asks the background for those sites and lists them under Connected Sites. Removing a site from Allowed Sites or Connected Sites drops its remembered entry under every address and sends AUTISTMASK_REMOVE_SITE with the hostname; the background deletes every matching connectedSites entry and sends accountsChanged with an empty list to the site's tabs. Only the extension's own pages may send either message. Model: opus-5-5	2026-10-04 06:41:39 +02:00
clawbot	5f54fcbb24	harden: end a site's unremembered connection when its address or wallet is removed (closes #245 ) check / check (push) Successful in 1m34s Details e2e / e2e-chrome (push) Successful in 2m1s Details e2e / e2e-firefox (push) Successful in 36s Details A site connected without "Remember" lives only in the background's in-memory connectedSites map. Removing an address or deleting a wallet dropped the remembered permissions but never told the background; the entry went only as a side effect of the accountsChanged broadcast, which empties the whole map when the active address changes. dropSitePermissions(), shared by both removal paths, now sends AUTISTMASK_ADDRESSES_REMOVED with the removed addresses, and the background deletes their entries. Only the extension's own pages may send it. Model: opus-5-5	2026-10-04 04:58:38 +02:00