test: drive the StateRecovery screen in both browser suites (closes #361)

A stored record a newer build wrote opens the popup on the recovery
screen. Export Saved Data puts that record, exactly as stored, in the
text box; a near-miss confirmation phrase erases nothing; the exact
phrase erases it and reloads into Welcome. Chrome and Firefox run the
same four cases, each under its shipped CSP.

They run before any wallet exists: with no wallet nothing saves on a
timer, so no save can write a good record over the unreadable one, and
the erase leaves the popup on Welcome for wallet creation. If any of
them fails, the last one removes the record so later tests still start
from Welcome.

Model: opus-5-5

.gitea/workflows/e2e.yml

@@ -22,11 +22,10 @@ on: [push]
 # These jobs REPORT, they do not gate. Whether a check blocks a merge is
 # Gitea branch protection, which this repo does not configure, so a failure
 # here is a red mark a reviewer has to account for rather than a hard
-# block. Making e2e-chrome a required check is blocked on the measured
+# block. Making e2e-chrome a required check is blocked while reports of the
-# flake in the dApp signing wait -- two of six runs of unmutated code on a
+# Chrome suite failing under load are still open; the "In CI" section of
-# loaded machine -- tracked as
+# README.md names them. A gate that fails at random teaches people to merge
-# https://git.eeqj.de/sneak/AutistMask/issues/287. A gate that fails at
+# past red.
-# random teaches people to merge past red.
 #
 # Nothing here may pass vacuously. There is no continue-on-error and no
 # `|| true`. Both scripts exit non-zero when docker is missing, when the

README.md

@@ -342,6 +342,11 @@ fixtures in `tests/e2e/network.js`, so the run is deterministic and fully
 offline; unrecognised outbound requests are reported as failures rather than
 silently allowed.
 
+It also covers the StateRecovery screen, under the shipped CSP: a stored record
+this build cannot read opens the popup on it, its export text box holds that
+record exactly as stored, a near-miss confirmation phrase erases nothing, and
+the exact one erases the record and reloads into Welcome.
+
 It also covers the **Settings screen**, which holds the densest run of element
 id lookups in the codebase and where one wrong id leaves the whole popup blank
 rather than only degrading Settings: that the screen renders populated — the
@@ -381,11 +386,13 @@ handler on a reserved-TLD origin, gets `window.ethereum` from the shipped
 the runner and compared against the active address, the transaction assertions
 run against the raw signed transaction captured at `eth_sendRawTransaction`
 rather than against anything the extension reported, rejecting each prompt is
-required to return a rejection to the page rather than hang or resolve, and the
+required to return a rejection to the page rather than hang or resolve, a prompt
-password is required to be absent from every message the approval window sends
+raised while another approval window has focus is required to open a window of
-to the background — with the message that would carry it required to be present,
+its own, and the password is required to be absent from every message the
-so that check cannot pass by observing nothing. That last one is the standing
+approval window sends to the background — with the message that would carry it
-floor under [#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
+required to be present, so that check cannot pass by observing nothing. That
+last one is the standing floor under
+[#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
 
 Two limits of that coverage, neither of them papered over. The RPC is stubbed
 throughout, so this is **not** a real dApp against a real network with real
@@ -462,10 +469,11 @@ Chrome that ever changes this fails the run instead of passing it.
 
 `make test-e2e-firefox` builds `dist/firefox/` and drives the **real popup in a
 real Firefox**, installed as an unpacked MV2 temporary add-on via geckodriver.
-It covers popup load, wallet creation through the UI, the Add Token screen, and
+It covers popup load, the StateRecovery screen (the same cases as the Chrome
-the four dApp round trips — `eth_requestAccounts`, `personal_sign`,
+suite), wallet creation through the UI, the Add Token screen, and the four dApp
-`eth_sendTransaction`, and a closed approval window rejecting with EIP-1193 4001
+round trips — `eth_requestAccounts`, `personal_sign`, `eth_sendTransaction`, and
-— driven through the real content script, background page and approval windows.
+a closed approval window rejecting with EIP-1193 4001 — driven through the real
+content script, background page and approval windows.
 
 The suite lives in `tests/e2e/firefox/`. Its WebDriver client (`driver.js`) has
 **no npm dependencies at all**: it is built on global `fetch` and
@@ -619,14 +627,10 @@ The jobs **report, they do not gate.** A failure is a red mark against the
 commit that a reviewer has to account for, not a hard block: whether a check
 blocks a merge is Gitea branch protection, which this repo does not configure.
 
-That is not only a statement about configuration. The Chrome suite is
+That is not only a statement about configuration. No report of the Chrome suite
-**measurably flaky under load** — two of six runs of unmutated code on a busy
+**failing under load** is open now, but it has failed that way before, so a red
-machine lost the approval popup out from under the dApp signing wait, always in
+`e2e-chrome` is read before it is believed. Do not answer one with a retry
-the `#183` section, tracked as
+wrapper: a suite that reruns until it is green stops being evidence.
-[#287](https://git.eeqj.de/sneak/AutistMask/issues/287). So a red `e2e-chrome`
-has to be read before it is believed, and that flake is the blocker to ever
-making this a required check. Do not answer it with a retry wrapper: a suite
-that reruns until it is green stops being evidence.
 
 Nothing in either job can pass vacuously. There is no `continue-on-error` and no
 `|| true`; both scripts exit non-zero when docker is missing, when the image
@@ -695,6 +699,7 @@ src/
     balances.js       — ETH + ERC-20 balance fetching via RPC + Blockscout
     constants.js      — chain IDs, default RPC endpoint, ERC-20 ABI
     ens.js            — ENS forward/reverse resolution (popup only)
+    holders.js        — holder-count parsing and the low-holder rule
     prices.js         — ETH/USD and token/USD via CoinDesk API
     scamlist.js       — known fraud contract addresses
     state.js          — persisted state (extension storage)
@@ -841,10 +846,26 @@ something when you click it.
 The same data must be formatted identically everywhere it appears. Token and ETH
 amounts are displayed with exactly 4 decimal places (e.g. "1.0500 ETH", "17.1900
 USDT") in balance lists, transaction lists, send confirmations, and approval
-screens. Timestamps include both an ISO datetime and a humanized relative age
+screens. A transaction's time includes both an ISO datetime and a humanized
-wherever shown. If a formatting rule applies in one place, it applies in every
+relative age, written by `isoDate()` and `timeAgo()` in
-place. Users should never see the same value rendered differently on two
+`src/popup/views/helpers.js` on every screen that shows one; the ISO datetime is
-screens.
+in UTC when the UTC Timestamps setting is on. If a formatting rule applies in
+one place, it applies in every place. Users should never see the same value
+rendered differently on two screens.
+
+The native token's label is a network's `nativeCurrency` in
+`src/shared/networks.js`: `ETH` on mainnet, `SepoliaETH` on Sepolia. The
+wallet's balances and the Send and confirmation screens, which send on the
+active network, use the active network's. A transaction's figures use the one of
+the network its chain id names, whichever network is active: the value and fee
+on the approval screen, the amount on the wait, success and error screens, the
+transaction history and the transaction detail screen, and the refusal of a fee
+above 1 ETH. A chain id that names no network reads `ETH`. Wherever this
+document shows ETH as the label of a native balance, value or fee, in a "Native
+ETH transfer" type line, in the contract-recipient warning or in that refusal,
+Sepolia shows `SepoliaETH`. The swap lines keep `ETH`, the router's own name for
+the native currency, and the ETH/USD price line, shown on mainnet only, keeps
+its fixed wording.
 
 **Specific Exception — Truncation:** On some non-critical display locations, we
 may truncate _a small number_ of characters from the middle of an address solely
@@ -887,7 +908,9 @@ Truncation stays truncation: `0.99999` shows as `0.9999`, never rounded up. The
 rule still renders a genuine zero as `0.0000`. Two lines of a swap say a zero in
 words instead: `Min. received` reads `None (no minimum guaranteed)` for a zero
 minimum, and `Amount` reads `All available (V4 open delta)` when the amount it
-shows is a V4 exact-in `amountIn` of zero.
+shows is a V4 exact-in `amountIn` of zero and
+`Whatever an earlier step sent to the pair (V2 already paid)` when it is a V2
+exact-in `amountIn` of zero.
 
 The rule and its exception live in `src/shared/amountDisplay.js` as
 `truncateAmount()` and `truncateAmountNeverZero()`. Everything the approval and
@@ -980,7 +1003,8 @@ read:
   exact-out step, whichever step set the line, including the `WRAP_ETH` of a
   swap paid in ETH and a `PERMIT2_PERMIT`. The swap spends at most that figure,
   not necessarily all of it; the wait, success and error screens show it with
-  the same words. `Unlimited` and `All available (V4 open delta)` keep their
+  the same words. `Unlimited`, `All available (V4 open delta)` and
+  `Whatever an earlier step sent to the pair (V2 already paid)` keep their
   wording. When a V2 exact-out step sets `Min. received`, that line shows its
   `amountOut`, the exact amount it buys.
 - `All available (V4 open delta)`: the swap's `Amount` line, when the amount it
@@ -991,11 +1015,22 @@ read:
   V2 exact-out, `WRAP_ETH` or V4 swap step. A V2 exact-out step gives its
   `amountInMax`, and a V4 swap step the `amountIn` of its first readable
   exact-in action.
+- `Whatever an earlier step sent to the pair (V2 already paid)`: the swap's
+  `Amount` line, when the amount it shows is a V2 exact-in `amountIn` of zero.
+  The router reads that zero as "the pair already holds the input tokens": the
+  step pays nothing itself and swaps whatever an earlier step sent to the pair,
+  so the calldata states no quantity. A V3 exact-in `amountIn` of zero has no
+  such meaning and is shown as a zero.
 - `None (no minimum guaranteed)`: the swap's `Min. received` line, when the
   minimum it shows is zero, whether a V2, V3 or V4 swap's minimum or a
   `BALANCE_CHECK_ERC20` step's `minBalance`. Before
   [#359](https://git.eeqj.de/sneak/AutistMask/issues/359), a zero `minBalance`
-  read `0.0000` when the token's scale was known.
+  read `0.0000` when the token's scale was known. The router passes a balance
+  check whenever the balance is at least `minBalance`, so a zero `minBalance`
+  guarantees nothing: it sets `Token Out` and `Min. received` only when the
+  output side holds no minimum, not even a zero one, at the point the check is
+  reached, and otherwise leaves the current token and figure in place. A nonzero
+  `minBalance` sets both lines, as a swap step does.
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
@@ -1008,6 +1043,12 @@ unwraps the WETH it did not spend shows USDC. The token permission warning on
 the signature screen has its own amount wording, including `Unknown`; the
 SignApproval section below describes it.
 
+The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
+`2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
+UTC, so a later deadline, such as the `uint256` maximum, reads
+`After 275760-09-13 00:00:00 (no deadline in practice)` rather than leaving the
+whole swap undecoded.
+
 #### Partial USD totals
 
 Prices are fetched for the top 25 tokens only, so an address can hold assets the
@@ -1086,15 +1127,21 @@ balance is nonzero and it is in the bundled known-token list, is tracked by the
 user, or has 1,000 or more holders; a token claiming a symbol from the bundled
 list from any other contract address is always dropped, and so is any token
 claiming a symbol that belongs to the native asset and therefore has no
-legitimate contract at all (`"ETH"`). That filter is unconditional — the "Hide
+legitimate contract at all (`"ETH"`, and every network's `nativeCurrency`, such
+as `"SepoliaETH"`, on every network). That filter is unconditional — the "Hide
 tokens with fewer than 1,000 holders" setting governs the transaction history
-and the send-screen token selector, not this list. `fetchTokenBalances()` stores
+and the send-screen token selector, not this list. A token's holder count is
-every nonzero holding of a token it admits, however small, but a holding below
+unknown when the explorer reports none, or reports anything other than a whole
-0.000001 is left out of the balance lists, the send-screen token selector, the
+number written in digits alone, such as `1,000` or `1e3` (`parseHoldersCount()`
-address total and the remove-address warning (`isBelowOneMillionth()` in
+in `src/shared/holders.js`). This list does not take an unknown count as 1,000
-`src/shared/amountDisplay.js`). The Send and confirmation screens show it when
+or more, so such a token is shown only when it is on the bundled list or
-its token is the one being sent. Tracked tokens with a zero balance are listed
+tracked. `fetchTokenBalances()` stores every nonzero holding of a token it
-as well while "Show tracked tokens with zero balance" is on.
+admits, however small, but a holding below 0.000001 is left out of the balance
+lists, the send-screen token selector, the address total and the remove-address
+warning (`isBelowOneMillionth()` in `src/shared/amountDisplay.js`). The Send and
+confirmation screens show it when its token is the one being sent. Tracked
+tokens with a zero balance are listed as well while "Show tracked tokens with
+zero balance" is on.
 
 #### Stored state and its version
 
@@ -1114,16 +1161,18 @@ because bumping for one would send every older install to StateRecovery for
 nothing.
 
 Every read of the record goes through `assertStateUsable()` first, on the raw
-bytes, before normalization: `loadState()` for the popup and `getState()` for
+bytes, before normalization: `loadState()` and every `saveState()` for the
-the background. It refuses a record that is not an object, a `schemaVersion`
+popup, and `getState()` for the background. It refuses a record that is not an
-this build does not understand (a newer one included), a `wallets` that is not a
+object, a `schemaVersion` this build does not understand (a newer one included),
-list of wallet records with address records in them, and a `networkId` that is
+a `wallets` that is not a list of wallet records with address records in them,
-not a network in `src/shared/networks.js`. Refusing is the whole point — a
+and a `networkId` that is not a network in `src/shared/networks.js`. Refusing is
-record the wallet cannot vouch for is never normalized, never written back, and
+the whole point — a record the wallet cannot vouch for is never normalized,
-never half-loaded. The popup shows StateRecovery; a dApp gets a specific error
+never written back, and never half-loaded. The popup shows StateRecovery,
-(`-32007`, an EIP-1474 server-error code the spec leaves unassigned) saying the
+whether it finds the record unreadable when it opens or at a save while it is
-saved data cannot be read and that nothing was signed or sent, rather than the
+open; a dApp gets a specific error (`-32007`, an EIP-1474 server-error code the
-generic `-32603` every request used to answer.
+spec leaves unassigned) saying the saved data cannot be read and that nothing
+was signed or sent, rather than the generic `-32603` every request used to
+answer.
 
 Every other field of the record is floored in `normalizePersisted()` rather than
 gated, and the floor is not the same for every field. Some are type-checked as a
@@ -1167,8 +1216,9 @@ now also reported rather than swallowed: `onSaveFailure()` in
 `src/shared/state.js` is called for every failed save, awaited or not, and the
 popup puts up a persistent "NOT SAVED" banner (`showSaveFailureBanner()` in
 `src/popup/views/helpers.js`). Storage can still fail for reasons no floor
-covers — a quota, a revoked permission, a record a newer build wrote — and the
+covers — a quota, a revoked permission — and the wallet must never look healthy
-wallet must never look healthy while that is true.
+while that is true. A save that fails because the stored record fails the gate,
+such as one a newer build wrote, gets StateRecovery instead of the banner.
 
 The `networkId` check is not cosmetic: that value is an object KEY into
 `state.networkEndpoints`, so an unvalidated `"__proto__"` would set the map's
@@ -1400,7 +1450,9 @@ view would leave a wallet one click from deletion.
     - Send / Receive buttons
     - Token contract well (ERC-20 only): full contract address (tap to copy,
       etherscan link) plus name, symbol, decimals, holder count and project
-      website where known
+      website where known. The "Holders:" row is left out, not shown as 0, when
+      the token's balance-list entry has no holder count: the explorer did not
+      report a readable one, or the token is not in the balance list
     - Token-filtered transaction list (only this token's transfers)
 - **Transitions**:
     - "Send" → **Send** (token locked: the dropdown is replaced by a static
@@ -1422,6 +1474,17 @@ view would leave a wallet one click from deletion.
     - Amount input with current balance display, which reads
       `Current balance: unknown (SYMBOL)` for a token whose scale is unknown, as
       ConfirmTx's balance line does (see Unknown token scale)
+    - "Max" button beside the amount input, always in place. It fills in a
+      token's balance, cut down to the 18 decimal places ConfirmTx accepts for a
+      token that has more, or for ETH the exact balance minus the network fee
+      reserve that ConfirmTx's balance check gates on, never the rounded balance
+      shown above it. The ETH fee is estimated for the recipient entered, so it
+      asks for a recipient first; an estimate that finishes after the screen was
+      left or the address, holding or recipient changed fills nothing in. Where
+      there is nothing to fill in, a flash message says why: the balance does
+      not cover the fee, the fee could not be estimated, or the token's balance
+      is unknown or zero. Typing in the amount makes it an ordinary amount;
+      changing what to send clears an amount Max filled in
     - "Review" button, disabled until the recipient validates
 - **Transitions**:
     - "Review" (valid inputs, ENS resolved) → **ConfirmTx**
@@ -1438,7 +1501,14 @@ view would leave a wallet one click from deletion.
     - Token contract: full address + etherscan link (ERC-20 only)
     - From: blockie + color dot + full address + etherscan link + wallet title
     - To: blockie + color dot + full address + etherscan link + ENS name
-    - Amount: value + symbol (USD in parentheses)
+    - Amount: value + symbol (USD in parentheses). An ETH amount Send's "Max"
+      filled in is worked out again from this screen's own fee estimate when it
+      arrives, as the balance minus the reserve, and the transaction is signed
+      with that estimate's fee fields, so a fee fetched again at signing cannot
+      exceed what the amount leaves behind. The address keeps whatever part of
+      the reserve the transaction does not use. If the balance no longer covers
+      the fee, the amount is left as it was and the amount-plus-fee error below
+      blocks the send
     - Your balance: value + symbol (USD in parentheses), or `unknown (SYMBOL)`
       for a token whose scale is unknown
     - Network fee: "Estimating..." then two lines, or "Unable to estimate",
@@ -1566,7 +1636,9 @@ view would leave a wallet one click from deletion.
     - "Transaction" heading, "Back" button
     - Transaction hash: full hash (tap to copy) + etherscan link
     - Type: transaction classification — one of: Native ETH Transfer, ERC-20
-      Token Transfer, Swap, Token Approval, Contract Call, Contract Creation
+      Token Transfer, Swap, Token Approval, Contract Call, Contract Creation. A
+      transfer with a token contract is an ERC-20 Token Transfer whatever symbol
+      the token reports.
     - Status: "Success" or "Failed"
     - From: blockie + color dot + full address (tap to copy) + etherscan link;
       ENS name if available
@@ -1740,7 +1812,10 @@ view would leave a wallet one click from deletion.
       new password — and, in bold, that without that phrase written down the
       deletion loses everything the wallet holds, forever
     - That the other wallets are not touched
-    - The wallet's name, and a text input asking for it to be typed back
+    - The wallet's name, and a text input asking for it to be typed back. A name
+      that shows nothing at all (only spaces, or only characters that paint
+      nothing) is shown as "Wallet N", its position in the list, and that is
+      what is typed back.
     - Error line
     - "Delete This Wallet Forever" button
 - **Transitions**:
@@ -1748,9 +1823,9 @@ view would leave a wallet one click from deletion.
       outcomes as "Confirm Delete" above, through the same `finishDelete()`, so
       the selection repair, permission cleanup and `AUTISTMASK_ACTIVE_CHANGED`
       broadcast are identical on both routes
-    - "Delete This Wallet Forever" (name does not match) → "That is not the name
+    - "Delete This Wallet Forever" (name does not match, or the field is empty)
-      of this wallet. Type <name> to confirm." on the error line, nothing
+      → "That is not the name of this wallet. Type <name> to confirm." on
-      deleted
+      the error line, nothing deleted
     - "Back" → **DeleteWallet**, re-entered through its `show()` so the wallet
       selection comes back with it. The two delete screens are siblings rather
       than parent and child: nothing is pushed on the way here, so both have
@@ -1759,8 +1834,13 @@ view would leave a wallet one click from deletion.
   secret protects nobody: an attacker at the popup who wants the wallet gone can
   uninstall the extension, so the only person such a gate stops is the owner who
   forgot it. The typed name is a check that the user knows which wallet they are
-  on, not a secret, so it is matched with surrounding spaces and letter case
+  on, not a secret, so it is matched as the user can see it: letter case,
-  ignored.
+  surrounding spaces and repeated inner spaces are ignored, and characters that
+  paint nothing (format characters such as the zero-width space,
+  default-ignorable characters, and DELETE — the same set
+  `src/shared/symbolSpoof.js` strips) are removed from both sides before
+  comparing. An empty field, or one holding only spaces or such characters, is
+  refused whatever the wallet is called.
 - Not in `RESTORABLE_VIEWS`, alongside `delete-wallet-confirm`: a popup reopened
   by accident must not land on a screen whose button erases key material.
 
@@ -1885,7 +1965,9 @@ view would leave a wallet one click from deletion.
   `eth_sendTransaction` arriving while one is unanswered is refused with
   EIP-1193 code `-32002` rather than being populated at the same nonce. It opens
   no window and takes no nonce, and the site can send it again once the pending
-  one is answered.
+  one is answered. The window is centred on the browser window the user was last
+  in; if that was another approval window, or the browser refuses the centred
+  position, the browser picks the position.
 - **Elements**:
     - "Transaction Request" heading
     - Phishing warning banner (shown when the hostname is on the phishing
@@ -1978,9 +2060,19 @@ view would leave a wallet one click from deletion.
 
 #### StateRecovery (`state-recovery`)
 
-- **When**: `loadState()` refused the stored profile, so the popup has no
+- **When**: the stored profile fails `assertStateUsable()`. At open, that is
-  profile at all. It is the only screen reached without one, and the only one
+  `loadState()` refusing it, so the popup has no profile at all. While the popup
-  that never appears during ordinary use.
+  is open, on any screen, it is a save refusing it: every `saveState()` reads
+  the stored record and runs the same check before writing, so the popup finds
+  it at the next navigation or ten-second refresh, whether or not the network
+  answers ([#373](https://git.eeqj.de/sneak/AutistMask/issues/373)). A save that
+  fails for any other reason, such as a storage read or write that errors, gets
+  the "NOT SAVED" banner instead and leaves the screen as it is. The screen it
+  replaces is left as any navigation leaves it, so a revealed phrase or key, or
+  a typed password, is wiped. Once up, the screen stays until the popup closes
+  or reloads: work still running in the popup, such as a transaction wait,
+  cannot replace it, even after the record is erased in another window. It is
+  the only screen that never appears during ordinary use.
 - **Why it exists**: a record the wallet cannot read used to render nothing — no
   view, no message, no control — while every dApp call answered a generic
   internal error, and no reset or wipe control existed anywhere in the product.
@@ -2007,16 +2099,20 @@ view would leave a wallet one click from deletion.
       Nothing was erased." on the error line
 - **No other control is reachable.** The Settings gear is hidden while this
   screen is up, because every screen behind it renders from the profile that
-  could not be read, and `showView()` is not used to raise it for the same
+  could not be read. `showView()` is not used to raise it, for the same reason:
-  reason — it reads and writes the state singleton.
+  it reads and writes the state singleton. Under an open popup the screen is
+  passed to `showView()` only to run the replaced screen's cleanup; from then on
+  `showView()` shows nothing else in that popup.
 - **Both controls are required.** An export with no reset leaves the user
   looking at a broken profile with no way to use the wallet again; a reset with
   no export destroys the only copy of a record that may hold recoverable key
   material. The typed phrase is the same barrier DeleteWalletLostPassword uses,
   and for the same reason: there is no password to gate this with, since there
   is no profile to check one against.
-- Not in `RESTORABLE_VIEWS`: it is never persisted as the current view, because
+- Not in `RESTORABLE_VIEWS`, and never recorded as the current view: the record
-  nothing on this path writes state at all.
+  can become readable again under an open popup, erased in another window, and
+  the next save from that popup then succeeds. A popup opened after that opens
+  normally.
 
 ### External Services
 
@@ -2325,7 +2421,8 @@ indexes it as a real token transfer.
   act on and what the user believes they own rather than what the history
   displays. All three surfaces read the rule from `src/shared/symbolSpoof.js`,
   so they cannot answer the question differently. A symbol the list maps to no
-  contract at all — `"ETH"`, the native asset, is the only one — may be borne by
+  contract at all — the native asset's labels: `"ETH"` and every network's
+  `nativeCurrency`, such as `"SepoliaETH"`, on every network — may be borne by
   no contract, so every ERC-20 claiming it is a spoof on all three. The user's
   real ETH balance is not an ERC-20 and is read over RPC, so the rule never sees
   it.
@@ -2334,7 +2431,8 @@ indexes it as a real token transfer.
   fewer than 1,000 holders are hidden from transaction history by default.
   Legitimate tokens have substantial holder counts; poisoning tokens typically
   have zero. This catches new poisoning contracts that use novel symbols not in
-  the known token list.
+  the known token list. A transfer whose token's holder count is unknown (see
+  Data Model) is kept: only a reported count below 1,000 hides it.
 
 - **Fraud contract blocklist**: AutistMask maintains a local list of known fraud
   contract addresses. Token transfers involving these contracts are filtered
@@ -2344,7 +2442,9 @@ indexes it as a real token transfer.
 - **Send-side token filtering**: Tokens with fewer than 1,000 holders are
   excluded from the token selector on the send screen. This prevents users from
   accidentally interacting with a spoofed token that appeared in their balance
-  via a fake Transfer event.
+  via a fake Transfer event. A token whose holder count is unknown is kept in
+  the selector. The selector offers only tokens in the balance list, so such a
+  token is one on the bundled list or one the user tracks.
 
 - **Dust transaction filtering**: A second wave of the same attack used real
   native ETH transfers instead of fake tokens. Transaction
@@ -2368,8 +2468,9 @@ indexes it as a real token transfer.
   both cases identically to the history. The fraud contract blocklist is applied
   unconditionally on that selector and is not consulted by the balance list at
   all. The low-holder setting also gates the send selector, while the balance
-  list's own 1,000-holder floor is unconditional (see Data Model). The dust
+  list's own 1,000-holder floor is unconditional (see Data Model). An unknown
-  threshold applies to the transaction history alone.
+  holder count passes the history and send-selector filters but not that floor.
+  The dust threshold applies to the transaction history alone.
 
 #### Phishing Domain Protection
 

TODO.md

@@ -45,6 +45,209 @@ but the review is broader than any of them.
 
 # Completed Steps
 
+- 2026-10-05: The StateRecovery screen is driven in a real browser under the
+  shipped CSP, in both end-to-end suites
+  ([#361](https://git.eeqj.de/sneak/AutistMask/issues/361)). A stored record
+  this build cannot read opens the popup on it; its export text box holds the
+  record exactly as stored; a near-miss confirmation phrase erases nothing; and
+  the exact phrase erases the record and reloads into Welcome. The cases run
+  before any wallet exists: with no wallet nothing saves on a timer, so no save
+  can write a good record over the unreadable one, and the erase leaves the
+  popup on Welcome for wallet creation.
+
+- 2026-10-05: Escaping in the popup's views follows its own rule with no
+  exceptions ([#329](https://git.eeqj.de/sneak/AutistMask/issues/329)). The
+  decimals and holder count on a token's screen, and every USD figure (the ETH
+  price, each total and each balance row's value), went into `innerHTML`
+  unescaped; they are escaped now. None could carry markup, but `formatUsd()`
+  writes a value under a cent as `< $0.01`. `displaySymbol()` counts a symbol in
+  code points rather than UTF-16 units, so a cut never splits an emoji into a
+  half that renders as U+FFFD. `explorerLink()`, also named in the issue, was
+  already removed by [#168](https://git.eeqj.de/sneak/AutistMask/issues/168).
+
+- 2026-10-05: A Chrome end-to-end test that fails no longer takes later tests
+  down with it ([#318](https://git.eeqj.de/sneak/AutistMask/issues/318)). Each
+  test that turns a fixture switch on for itself alone (a held or failing gas
+  estimate, a seeded native transfer or receipt, a token's lying `decimals()` or
+  markup symbol) turns it off again in a `finally`, and the two tests that drive
+  the popup's own send end on the address screen whether they pass or not,
+  reopening the popup to leave a wait for a receipt. The lying-`decimals()` test
+  checks that nothing was broadcast as soon as the send ends, before it waits
+  for the failure screen, so a broadcast fails it in seconds rather than after a
+  60-second wait. The fixture's `decimals()` override tells 0 from no override,
+  so a token with no decimal places can be fixtured.
+
+- 2026-10-05: Chrome draws the popup in its monospace font
+  ([#418](https://git.eeqj.de/sneak/AutistMask/issues/418)), as Firefox does.
+  Chrome adds a stylesheet of its own to extension pages that sets the font on
+  `body`, and it beat Tailwind's `font-mono`: Tailwind 4 puts its classes in a
+  cascade layer, and a rule outside any layer wins over them. `body` now carries
+  `font-mono!`, which marks the class important. Both end-to-end suites check
+  the popup's font. The same stylesheet also makes Chrome draw the popup's text
+  at 12px rather than the 14px `text-sm` asks for; that is unchanged, and filed
+  as [#456](https://git.eeqj.de/sneak/AutistMask/issues/456).
+
+- 2026-10-05: Dead code removed and copied view helpers shared
+  ([#168](https://git.eeqj.de/sneak/AutistMask/issues/168)). AddressDetail and
+  AddressToken each defined their own `isoDate()` and `timeAgo()` in place of
+  the ones in `src/popup/views/helpers.js`, so a fix to the shared pair would
+  not have reached them. The copies were identical; every screen now uses the
+  shared pair. `blockieHtml()` and `tokenLabel()`, each defined twice, live in
+  `helpers.js` too. Removed as never called: `explorerLink()` (the views build
+  explorer links with `explorerUrl()`), `ETHEREUM_SEPOLIA_CHAIN_ID` (the chain
+  id lives in `src/shared/networks.js`), and `getWalletValue()` and
+  `getTotalValue()`: Home's "Total:" is the active address's total, as
+  `README.md` says. `addressColor()` and `etherscanAddressUrl()` are no longer
+  exported. Nothing the user sees changed.
+
+- 2026-10-05: A prompt raised while another approval window has focus opens a
+  window of its own ([#290](https://git.eeqj.de/sneak/AutistMask/issues/290)).
+  The background centred each approval window on the last focused window, which
+  could be an earlier approval window still open; headless Chrome reports one as
+  1280x720, so the new window came out where the browser refused to create it,
+  and the request failed with no window at all. It now centres only on a browser
+  window, and when the browser refuses the position it asks again without one
+  and lets the browser place the window. In the Chrome end-to-end suite a test
+  could raise its prompt while the previous test's window was still closing, and
+  then either hit that refusal or take the closing window for its own. After a
+  test that passed, the runner now waits a few seconds for approval windows to
+  close and fails the test if one is still open; after a test that failed, it
+  closes them.
+
+- 2026-10-05: The Send screen has a "Max" button
+  ([#198](https://git.eeqj.de/sneak/AutistMask/issues/198)). Emptying an ETH
+  address took guessing an amount and being refused by the confirmation screen's
+  balance check. Max fills in a token's whole balance, cut to the 18 decimal
+  places the confirmation screen accepts, or for ETH the exact balance minus the
+  fee reserve that check gates on, never the four-decimal balance shown; a fee
+  estimate that finishes after the Send screen was left, or its address, holding
+  or recipient changed, fills nothing in. The confirmation screen works a max
+  ETH amount out again from its own fee estimate and signs it with that
+  estimate's fee fields: fetched again at signing, a fee that had risen since
+  would leave amount plus fee above the balance, and the node would refuse the
+  send. A token's maximum is still refused when ETH cannot pay the fee. Where
+  there is nothing to fill in, a flash message says why.
+
+- 2026-10-05: A token scale of zero decimals is tested
+  ([#325](https://git.eeqj.de/sneak/AutistMask/issues/325)).
+  `resolveTokenDecimals()` already used a scale of 0 from the bundled list or
+  from a tracked token, but no test said so: turning either of its `d !== null`
+  checks into a plain truthiness check left every test green while a
+  zero-decimal token fell through to the next source, or to "decimals unknown".
+  The approval tests now assert a scale of 0 from each of those two sources,
+  both where it is resolved and on the approval screen's Amount line. The second
+  half of the issue, one shared `toDecimals()`, had already landed with
+  [#349](https://git.eeqj.de/sneak/AutistMask/issues/349).
+
+- 2026-10-05: The e2e suite waits for a save to land before it closes the popup
+  ([#446](https://git.eeqj.de/sneak/AutistMask/issues/446)). The Settings round
+  trip switched the theme and the network and closed the popup at once, and a
+  close before the save lands loses the switch; with the network left on
+  Sepolia, a dozen later tests failed too. Each Settings switch and spam-filter
+  toggle is now waited for in storage before the close, and `reopenPopup()`
+  waits until the view it expects to reopen on is the saved one. The restore
+  half of the round trip and the second filter toggle change a setting right
+  after a reopen, while the reopened popup's own saves may still be running;
+  they rely on the fix for
+  [#448](https://git.eeqj.de/sneak/AutistMask/issues/448).
+
+- 2026-10-05: A change made while an earlier save from the same page is still
+  running is stored ([#448](https://git.eeqj.de/sneak/AutistMask/issues/448)).
+  `saveStateOnce()` took its baseline from the page's state after the write, so
+  a change made while the save waited on storage counted as already stored and
+  the save queued after it wrote nothing. A setting changed during the read was
+  lost; so was a wallet added, a site revoked or an endpoint changed during the
+  write, and a wallet deleted then stayed in storage. The save now copies the
+  page's fields when it starts, writes from that copy, and keeps the copy as the
+  baseline.
+
+- 2026-10-05: The extension no longer opens a window for a site-connection
+  prompt already answered
+  ([#287](https://git.eeqj.de/sneak/AutistMask/issues/287)). When the prompt was
+  decided before the toolbar popup raised for it had loaded, that popup was torn
+  down, `chrome.action.openPopup()` rejected, and the background opened its
+  fallback window for the answered approval and then removed it. In the Chrome
+  end-to-end suite the next test could take that window for its own prompt and
+  lose it under its wait. `openApprovalWindow()` now opens nothing for an
+  approval that is no longer pending. The blocklist test's Reject, whose window
+  closes itself, is clicked as the other site Reject is, with the click
+  witnessed. Making `e2e-chrome` a required check is still blocked: other
+  reports of the Chrome suite failing under load are open, among them
+  [#290](https://git.eeqj.de/sneak/AutistMask/issues/290) and
+  [#446](https://git.eeqj.de/sneak/AutistMask/issues/446), as `README.md` says.
+
+- 2026-10-05: The lost-password delete confirmation refuses an empty field and
+  ignores characters that paint nothing
+  ([#336](https://git.eeqj.de/sneak/AutistMask/issues/336)). A wallet named only
+  with spaces compared equal to an empty field, so typing nothing would have
+  deleted it, and a zero-width space in a name made the name impossible to type
+  back. An empty field is now refused whatever the name is, the same invisible
+  characters `src/shared/symbolSpoof.js` strips are removed from both sides, and
+  a name that shows nothing is shown and typed back as "Wallet N".
+
+- 2026-10-05: A `holders_count` that is not a whole number in plain digits is
+  unknown, not read in part
+  ([#251](https://git.eeqj.de/sneak/AutistMask/issues/251)). `parseInt` read
+  `1,000` as 1, `0x10` as 0 and `1e3` as 1, a reported low count that hides the
+  token in the transaction history and the send-screen token selector. A count
+  above `Number.MAX_SAFE_INTEGER` is unknown too, not rounded or `Infinity`. The
+  balance list's `holders !== null` check, which did nothing, is dropped.
+  `README.md` and `docs/README.md` now say how each filter treats an unknown
+  count and that the token screen leaves out its "Holders:" row then, and
+  `README.md` lists `src/shared/holders.js`.
+
+- 2026-10-04: A popup boot in the tests loads transactions without failing
+  ([#429](https://git.eeqj.de/sneak/AutistMask/issues/429)). The stand-in for
+  `filterTransactions` in `tests/support/popupBoot.js` returned a bare list,
+  while the real one returns `{ transactions, newFraudContracts }`, so every
+  boot onto Home, AddressDetail or AddressToken failed inside its transaction
+  loading and logged `loadHomeTxs failed` or `loadTransactions failed`; the rest
+  of that code never ran. The stand-in now returns the real shape, and
+  `tests/persistedFieldContract.test.js` boots onto each of the three and
+  asserts neither message is logged. `make test` time did not change measurably.
+
+- 2026-10-04: The native token's label follows the network
+  ([#372](https://git.eeqj.de/sneak/AutistMask/issues/372)). `networks.js` gives
+  each network a `nativeCurrency` and nothing read it: every screen wrote `ETH`,
+  so on Sepolia the balance, the value and the fee all read `ETH`. Every native
+  figure now reads `nativeCurrency`, which is `ETH` on mainnet and `SepoliaETH`
+  on Sepolia: the balance lists, Send and confirmation screens and the
+  contract-recipient warning the active network's; the approval, wait, success,
+  error and transaction detail screens, the transaction history and the refusal
+  of a fee above the limit that of the network the transaction's chain id names.
+  A token claiming any network's `nativeCurrency` is dropped as a fake, as one
+  claiming `ETH` already was, and the transaction detail screen calls an entry a
+  token transfer when it has a token contract, not by its symbol.
+- 2026-10-04: A popup that is already open when the stored profile becomes
+  unreadable moves to the recovery screen
+  ([#373](https://git.eeqj.de/sneak/AutistMask/issues/373)). It used to stay on
+  the last good profile, with the "NOT SAVED" banner at most, until reopened.
+  Every save already ran the check the popup runs at open, so the popup finds
+  the record at the next navigation or ten-second refresh, whether or not the
+  network answers; a save that fails that check now raises the recovery screen
+  and stops the refresh. The screen it replaces is left as any navigation leaves
+  it, so a revealed phrase or key or a typed password is wiped. Once up, nothing
+  else in that popup can replace it, and a later save or a transaction wait that
+  ends does not clear an export or a typed confirmation. It is never saved as
+  the current view, so a popup opened after the record is erased in another
+  window opens normally. Any other failed save still gets the banner and leaves
+  the screen alone.
+- 2026-10-04: A swap whose deadline is later than a JavaScript date can hold is
+  decoded ([#437](https://git.eeqj.de/sneak/AutistMask/issues/437)). A date
+  reaches only to 275760-09-13, so a later deadline, such as the `uint256`
+  maximum, made the `Deadline` line throw, and the approval screen showed the
+  swap as an undecoded contract call with nothing saying why. That line now
+  reads `After 275760-09-13 00:00:00 (no deadline in practice)`.
+- 2026-10-04: The swap decoder reads two router zeros the way the router does
+  ([#415](https://git.eeqj.de/sneak/AutistMask/issues/415)). A V2 exact-in
+  `amountIn` of zero means an earlier step already sent the tokens to the pair;
+  `Amount` showed `0.0000` for it and now reads
+  `Whatever an earlier step sent to the pair (V2 already paid)`. A
+  `BALANCE_CHECK_ERC20` with a zero `minBalance` guarantees nothing, yet it
+  replaced the minimum an earlier swap step stated, so `Min. received` read
+  `None (no minimum guaranteed)`; it now sets the output side only when that
+  side holds no minimum at the point the check is reached. A nonzero
+  `minBalance` still sets the output side.
 - 2026-10-04: The signature screen shows a personal message as the bytes that
   are signed ([#403](https://git.eeqj.de/sneak/AutistMask/issues/403)). It
   showed only the decoded text, with bidirectional and zero-width characters

docs/README.md

@@ -240,7 +240,9 @@ screen. Tokens can also be added from Settings, under "Tracked Tokens".
 2. Select what to send (ETH, or any ERC-20 token with a balance on this address
    that survives the spam filters).
 3. Enter the recipient address or ENS name (e.g. `vitalik.eth`).
-4. Enter the amount.
+4. Enter the amount, or click "Max" to fill it in: a token's balance, cut to 18
+   decimal places, or your ETH balance minus the amount reserved for the network
+   fee.
 5. Click "Review" to see the confirmation screen.
 
 The confirmation screen shows:
@@ -333,7 +335,13 @@ it is hidden from your transaction history and from the send token list.
 from transaction history and the send token list, and are left out of your
 balances unless they are on the bundled known-token list or you added them
 yourself. Legitimate tokens have substantial holder counts; scam tokens deployed
-for address poisoning typically have zero.
+for address poisoning typically have zero. When the explorer reports no holder
+count for a token, or reports something other than a whole number in plain
+digits (such as "1,000"), the count is unknown. An unknown count does not hide a
+token from your transaction history or the send token list, and it does not get
+a token into your balances either: such a token is listed only if it is on the
+bundled known-token list or you added it yourself. The screen you reach by
+clicking a token balance shows a "Holders:" line only when the count is known.
 
 **Fraud contract blocklist.** When AutistMask detects a fraudulent transfer, it
 adds the contract address to a local blocklist. Future transactions from that

src/background/index.js

@@ -413,7 +413,7 @@ function releaseApproval(approval) {
     }
 }
 
-// Open approval in a separate popup window.
+// Open approval in a separate popup window, unless it is no longer pending.
 // This is the primary mechanism for tx/sign approvals (triggered programmatically,
 // not from a user gesture) and the fallback for site-connection approvals.
 // Never rejects. Its callers raise it from inside a Promise executor and drop
@@ -437,7 +437,13 @@ async function openApprovalWindow(id) {
         width: popupWidth,
         height: popupHeight,
     };
-    if (currentWin) {
+    // Centred on a browser window only. The last focused window can be
+    // another approval window still open, and centring on one can give a
+    // position the browser refuses ("Bounds must be at least 50% within
+    // visible screen space"): headless Chrome reports this 360x600 popup as
+    // 1280x720. The request then failed with no window at all. Over a popup,
+    // the browser picks the position.
+    if (currentWin && currentWin.type === "normal") {
         opts.left = Math.round(
             currentWin.left + (currentWin.width - popupWidth) / 2,
         );
@@ -446,15 +452,32 @@ async function openApprovalWindow(id) {
         );
     }
 
+    // Already answered: a site-connection prompt decided before the toolbar
+    // popup raised for it had loaded, whose openPopup() rejects only now.
+    if (!pendingApprovals[id]) return;
+
     let win = null;
     try {
         win = await windowsCreate(opts);
     } catch (e) {
         // The promise namespace reports the failure by rejecting where the
-        // callback namespace reported it by handing back no window; both land
+        // callback namespace reported it by handing back no window; both
-        // on the !win branch below, which settles the approval.
+        // leave win null.
         log.errorf("could not open the approval window:", e);
     }
+    // The browser also refuses a centred position that is too far off screen,
+    // as it is over a browser window near the screen edge. Asked again
+    // without a position, it places the window itself. If that fails too,
+    // the !win branch below settles the approval.
+    if (!win && opts.left !== undefined) {
+        delete opts.left;
+        delete opts.top;
+        try {
+            win = await windowsCreate(opts);
+        } catch (e) {
+            log.errorf("could not open the approval window:", e);
+        }
+    }
 
     const approval = pendingApprovals[id];
     if (!approval) {

src/popup/index.html

@@ -6,7 +6,10 @@
         <title>AutistMask</title>
         <link rel="stylesheet" href="styles.css" />
     </head>
-    <body class="bg-bg text-fg font-mono text-sm">
+    <!-- Chrome gives extension pages a stylesheet of its own that sets the
+         font on body, and a Tailwind class beats it only when marked
+         important: hence font-mono! rather than font-mono. -->
+    <body class="bg-bg text-fg font-mono! text-sm">
         <div id="app" class="p-2 pr-5 overflow-x-hidden">
             <!-- ============ GLOBAL TITLE BAR ============ -->
             <div
@@ -551,12 +554,20 @@
                             class="text-xs text-muted"
                         ></span>
                     </div>
-                    <input
+                    <div class="flex gap-1">
-                        type="text"
+                        <input
-                        id="send-amount"
+                            type="text"
-                        class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
+                            id="send-amount"
-                        placeholder="0.0"
+                            class="border border-border p-1 flex-1 min-w-0 font-mono text-sm bg-bg text-fg"
-                    />
+                            placeholder="0.0"
+                        />
+                        <button
+                            id="btn-send-max"
+                            class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer"
+                        >
+                            Max
+                        </button>
+                    </div>
                 </div>
                 <button
                     id="btn-send-review"
@@ -640,19 +651,13 @@
                         Double-check the address before sending.
                     </div>
                 </div>
+                <!-- Its sentence names the network's native token, so show()
+                in confirmTx.js sets it. -->
                 <div
                     id="confirm-contract-warning"
-                    class="mb-2"
+                    class="mb-2 border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
                     style="visibility: hidden"
-                >
+                ></div>
-                    <div
-                        class="border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
-                    >
-                        WARNING: The recipient is a smart contract. Sending ETH
-                        or tokens directly to a contract may result in permanent
-                        loss of funds.
-                    </div>
-                </div>
                 <div
                     id="confirm-burn-warning"
                     class="mb-2"
@@ -690,14 +695,13 @@
                     Your balance does not cover this amount plus the network
                     fee. Please go back and send a smaller amount.
                 </div>
+                <!-- Its sentence names the network's native token, so show()
+                in confirmTx.js sets it. -->
                 <div
                     id="confirm-gas-error"
                     class="mb-2 border border-border border-dashed p-2 text-xs"
                     style="visibility: hidden"
-                >
+                ></div>
-                    You do not have enough ETH to pay the network fee for this
-                    transfer. Please add ETH to this address and try again.
-                </div>
                 <!-- Its sentence names why the fee could not be estimated,
                 so show() in confirmTx.js sets it. -->
                 <div

src/popup/index.js

@@ -50,6 +50,10 @@ function renderWalletList() {
 
 let refreshInFlight = false;
 
+// The ten-second refresh init() starts, stopped when the popup moves to the
+// recovery screen: there is no profile left to refresh.
+let refreshTimer = null;
+
 async function doRefreshAndRender() {
     if (refreshInFlight) return;
     refreshInFlight = true;
@@ -155,7 +159,28 @@ async function init() {
     // reported rather than being swallowed by the save queue
     // (https://git.eeqj.de/sneak/AutistMask/issues/362). Registered ahead of
     // the approval-window branch below too, since that window saves as well.
-    onSaveFailure(showSaveFailureBanner);
+    //
+    // Every save first reads the stored record and refuses it with the same
+    // check loadState() runs below. So a record that becomes unreadable while
+    // the popup is open is found by the next save, a navigation or the
+    // ten-second refresh, and gets the screen it would get at open
+    // (https://git.eeqj.de/sneak/AutistMask/issues/373). Passing the recovery
+    // screen to showView() first leaves the current screen as any navigation
+    // does, so a phrase, key or password on it is wiped, and from then on
+    // showView() shows nothing else. A later save that fails the same way,
+    // such as a refresh already in flight, comes back here, where both calls
+    // see the screen already up and do nothing. Any other failed save is a
+    // read or write that failed, and gets the banner without changing the
+    // screen.
+    onSaveFailure((e) => {
+        if (e instanceof StateUnusableError) {
+            clearInterval(refreshTimer);
+            showView("state-recovery");
+            stateRecovery.show(e);
+        } else {
+            showSaveFailureBanner(e);
+        }
+    });
     try {
         await loadState();
     } catch (e) {
@@ -244,7 +269,7 @@ async function init() {
         renderWalletList();
         restoreView();
         doRefreshAndRender();
-        setInterval(doRefreshAndRender, 10000);
+        refreshTimer = setInterval(doRefreshAndRender, 10000);
     }
 }
 

src/popup/views/addressDetail.js

@@ -11,8 +11,10 @@ const {
     attachCopyHandlers,
     goBack,
     pushCurrentView,
+    isoDate,
+    timeAgo,
 } = require("./helpers");
-const { state, saveState } = require("../../shared/state");
+const { state, saveState, currentNetwork } = require("../../shared/state");
 const { formatAddressTotal, getAddressValue } = require("../../shared/prices");
 const {
     fetchRecentTransactions,
@@ -64,7 +66,7 @@ function show() {
     $("address-line").dataset.full = addr.address;
     attachCopyHandlers($("address-line"));
     const usdTotal = formatAddressTotal(getAddressValue(addr));
-    $("address-usd-total").innerHTML = usdTotal || " ";
+    $("address-usd-total").innerHTML = escapeHtml(usdTotal) || " ";
     const ensEl = $("address-ens");
     // ENS is now shown inside renderAddressHtml, hide the separate element
     ensEl.classList.add("hidden");
@@ -88,62 +90,6 @@ function show() {
     loadTransactions(addr.address);
 }
 
-function isoDate(timestamp) {
-    const d = new Date(timestamp * 1000);
-    const pad = (n) => String(n).padStart(2, "0");
-    if (state.utcTimestamps) {
-        return (
-            d.getUTCFullYear() +
-            "-" +
-            pad(d.getUTCMonth() + 1) +
-            "-" +
-            pad(d.getUTCDate()) +
-            "T" +
-            pad(d.getUTCHours()) +
-            ":" +
-            pad(d.getUTCMinutes()) +
-            ":" +
-            pad(d.getUTCSeconds()) +
-            "Z"
-        );
-    }
-    const offsetMin = -d.getTimezoneOffset();
-    const sign = offsetMin >= 0 ? "+" : "-";
-    const absOff = Math.abs(offsetMin);
-    const tzStr = sign + pad(Math.floor(absOff / 60)) + ":" + pad(absOff % 60);
-    return (
-        d.getFullYear() +
-        "-" +
-        pad(d.getMonth() + 1) +
-        "-" +
-        pad(d.getDate()) +
-        "T" +
-        pad(d.getHours()) +
-        ":" +
-        pad(d.getMinutes()) +
-        ":" +
-        pad(d.getSeconds()) +
-        tzStr
-    );
-}
-
-function timeAgo(timestamp) {
-    const seconds = Math.floor(Date.now() / 1000 - timestamp);
-    if (seconds < 60) return seconds + " seconds ago";
-    const minutes = Math.floor(seconds / 60);
-    if (minutes < 60)
-        return minutes + " minute" + (minutes !== 1 ? "s" : "") + " ago";
-    const hours = Math.floor(minutes / 60);
-    if (hours < 24) return hours + " hour" + (hours !== 1 ? "s" : "") + " ago";
-    const days = Math.floor(hours / 24);
-    if (days < 30) return days + " day" + (days !== 1 ? "s" : "") + " ago";
-    const months = Math.floor(days / 30);
-    if (months < 12)
-        return months + " month" + (months !== 1 ? "s" : "") + " ago";
-    const years = Math.floor(days / 365);
-    return years + " year" + (years !== 1 ? "s" : "") + " ago";
-}
-
 let loadedTxs = [];
 
 let ensNameMap = new Map();
@@ -153,6 +99,7 @@ async function loadTransactions(address) {
         const rawTxs = await fetchRecentTransactions(
             address,
             state.blockscoutUrl,
+            currentNetwork().chainId,
         );
         const result = filterTransactions(rawTxs, {
             hideSpoofedSymbols: state.hideSpoofedSymbols,

src/popup/views/addressToken.js

@@ -10,14 +10,17 @@ const {
     addressTitle,
     escapeHtml,
     displaySymbol,
+    nativeCurrency,
     balanceLine,
     unknownableAmount,
     renderAddressHtml,
     attachCopyHandlers,
     goBack,
     pushCurrentView,
+    isoDate,
+    timeAgo,
 } = require("./helpers");
-const { state, saveState } = require("../../shared/state");
+const { state, saveState, currentNetwork } = require("../../shared/state");
 const { TOKEN_BY_ADDRESS, resolveSymbol } = require("../../shared/tokenList");
 const { formatUsd, getPrice } = require("../../shared/prices");
 const {
@@ -36,62 +39,6 @@ const { walletDefect } = require("../../shared/walletDefects");
 
 let ctx;
 
-function isoDate(timestamp) {
-    const d = new Date(timestamp * 1000);
-    const pad = (n) => String(n).padStart(2, "0");
-    if (state.utcTimestamps) {
-        return (
-            d.getUTCFullYear() +
-            "-" +
-            pad(d.getUTCMonth() + 1) +
-            "-" +
-            pad(d.getUTCDate()) +
-            "T" +
-            pad(d.getUTCHours()) +
-            ":" +
-            pad(d.getUTCMinutes()) +
-            ":" +
-            pad(d.getUTCSeconds()) +
-            "Z"
-        );
-    }
-    const offsetMin = -d.getTimezoneOffset();
-    const sign = offsetMin >= 0 ? "+" : "-";
-    const absOff = Math.abs(offsetMin);
-    const tzStr = sign + pad(Math.floor(absOff / 60)) + ":" + pad(absOff % 60);
-    return (
-        d.getFullYear() +
-        "-" +
-        pad(d.getMonth() + 1) +
-        "-" +
-        pad(d.getDate()) +
-        "T" +
-        pad(d.getHours()) +
-        ":" +
-        pad(d.getMinutes()) +
-        ":" +
-        pad(d.getSeconds()) +
-        tzStr
-    );
-}
-
-function timeAgo(timestamp) {
-    const seconds = Math.floor(Date.now() / 1000 - timestamp);
-    if (seconds < 60) return seconds + " seconds ago";
-    const minutes = Math.floor(seconds / 60);
-    if (minutes < 60)
-        return minutes + " minute" + (minutes !== 1 ? "s" : "") + " ago";
-    const hours = Math.floor(minutes / 60);
-    if (hours < 24) return hours + " hour" + (hours !== 1 ? "s" : "") + " ago";
-    const days = Math.floor(hours / 24);
-    if (days < 30) return days + " day" + (days !== 1 ? "s" : "") + " ago";
-    const months = Math.floor(days / 30);
-    if (months < 12)
-        return months + " month" + (months !== 1 ? "s" : "") + " ago";
-    const years = Math.floor(days / 365);
-    return years + " year" + (years !== 1 ? "s" : "") + " ago";
-}
-
 let loadedTxs = [];
 let ensNameMap = new Map();
 let currentSymbol = null;
@@ -106,7 +53,7 @@ function show() {
     let symbol, amount, price;
     const knownToken = TOKEN_BY_ADDRESS.get(tokenId.toLowerCase());
     if (tokenId === "ETH") {
-        symbol = "ETH";
+        symbol = nativeCurrency();
         amount = parseFloat(addr.balance || "0");
         price = getPrice("ETH");
     } else {
@@ -156,7 +103,7 @@ function show() {
     // USD total for this token only
     const usdVal = price && amount !== null ? amount * price : null;
     const usdStr = formatUsd(usdVal);
-    $("address-token-usd-total").innerHTML = usdStr || "&nbsp;";
+    $("address-token-usd-total").innerHTML = escapeHtml(usdStr) || "&nbsp;";
 
     // Single token balance line (no tokenId — not clickable here)
     $("address-token-balance").innerHTML = balanceLine(symbol, amount, price);
@@ -201,9 +148,9 @@ function show() {
         if (tokenSymbol)
             infoHtml += `<div class="mb-1"><span class="text-muted">Symbol:</span> ${tokenSymbol}</div>`;
         if (tokenDecimals != null)
-            infoHtml += `<div class="mb-1"><span class="text-muted">Decimals:</span> ${tokenDecimals}</div>`;
+            infoHtml += `<div class="mb-1"><span class="text-muted">Decimals:</span> ${escapeHtml(tokenDecimals)}</div>`;
         if (tokenHolders != null)
-            infoHtml += `<div class="mb-1"><span class="text-muted">Holders:</span> ${Number(tokenHolders).toLocaleString()}</div>`;
+            infoHtml += `<div class="mb-1"><span class="text-muted">Holders:</span> ${escapeHtml(Number(tokenHolders).toLocaleString())}</div>`;
         if (projectUrl)
             infoHtml += `<div class="mb-1"><span class="text-muted">Website:</span> <a href="${escapeHtml(projectUrl)}" target="_blank" rel="noopener" class="underline decoration-dashed">${escapeHtml(projectUrl)}</a></div>`;
         contractInfo.innerHTML = infoHtml;
@@ -226,6 +173,7 @@ async function loadTransactions(address, tokenId) {
         const rawTxs = await fetchRecentTransactions(
             address,
             state.blockscoutUrl,
+            currentNetwork().chainId,
         );
         const result = filterTransactions(rawTxs, {
             hideSpoofedSymbols: state.hideSpoofedSymbols,

src/popup/views/approval.js

@@ -10,9 +10,13 @@ const {
     attachCopyHandlers,
     onViewLeave,
     formatFee,
+    tokenLabel,
 } = require("./helpers");
 const { state, saveState } = require("../../shared/state");
-const { networkByChainId } = require("../../shared/networks");
+const {
+    networkByChainId,
+    nativeCurrencyByChainId,
+} = require("../../shared/networks");
 const {
     formatEther,
     formatUnits,
@@ -70,17 +74,6 @@ function tokenAmountText(rawAmount, decimals, symbol) {
     };
 }
 
-// The symbol shown for a token line, resolved from the bundled list, the
-// tokens the user tracks, and the explorer's report — the same chain the
-// amount line's scale comes from. Null when no source names one, so the token
-// lines keep saying `Unknown token` for a token nothing knows.
-function tokenLabel(address) {
-    return resolveTokenSymbol(address, {
-        trackedTokens: state.trackedTokens,
-        wallets: state.wallets,
-    });
-}
-
 // Try to decode calldata using known ABIs.
 // Returns { name, description, details } or null.
 function decodeCalldata(data, toAddress) {
@@ -219,8 +212,12 @@ function showTxFee(approvedTx) {
     const gasLimit = BigInt(approvedTx.gasLimit);
     const feePerGas = BigInt(approvedTx.maxFeePerGas || approvedTx.gasPrice);
     // Through formatFee(), as the confirmation screen's fee is, so the same
-    // fee reads the same on both.
+    // fee reads the same on both. In the native currency of the network shown
-    $("approve-tx-fee").textContent = formatFee(gasLimit * feePerGas);
+    // above, as the value is.
+    $("approve-tx-fee").textContent = formatFee(
+        gasLimit * feePerGas,
+        nativeCurrencyByChainId(approvedTx.chainId),
+    );
 
     let detail =
         gasLimit.toString() +
@@ -264,6 +261,7 @@ function showTxApproval(details) {
         amount: formatTxValue(ethValue),
         token: "ETH",
         tokenSymbol: null,
+        chainId: approvedTx.chainId,
     };
 
     // If this is an ERC-20 call, try to extract the real recipient and amount
@@ -329,8 +327,15 @@ function showTxApproval(details) {
     const ethPrice = getPrice("ETH");
     const ethUsd = ethPrice ? parseFloat(ethValueFormatted) * ethPrice : null;
     const usdStr = formatUsd(ethUsd);
+    // In the native currency of the network the transaction is for, which the
+    // Network line names, not the active network's: a site can switch the
+    // active network after this transaction is prepared and back before it is
+    // signed.
     $("approve-tx-value").textContent =
-        ethValueFormatted + " ETH" + (usdStr ? " (" + usdStr + ")" : "");
+        ethValueFormatted +
+        " " +
+        nativeCurrencyByChainId(approvedTx.chainId) +
+        (usdStr ? " (" + usdStr + ")" : "");
 
     showTxFee(approvedTx);
 

src/popup/views/confirmTx.js

@@ -11,13 +11,15 @@ const {
     addressTitle,
     escapeHtml,
     displaySymbol,
+    nativeCurrency,
     renderAddressHtml,
+    blockieHtml,
     attachCopyHandlers,
     goBack,
     onViewLeave,
     formatFee,
 } = require("./helpers");
-const { state } = require("../../shared/state");
+const { state, currentNetwork } = require("../../shared/state");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { decryptWithPassword } = require("../../shared/vault");
 const { formatUsd, getPrice } = require("../../shared/prices");
@@ -42,10 +44,10 @@ const {
     FEE_UNAVAILABLE,
     feeReserveWei,
     feeEstimateWei,
+    maxEthAmount,
     validateTransfer,
 } = require("../../shared/txValidation");
 const { log } = require("../../shared/log");
-const makeBlockie = require("ethereum-blockies-base64");
 const txStatus = require("./txStatus");
 
 let pendingTx = null;
@@ -53,6 +55,10 @@ let pendingTx = null;
 // filled in by estimateGas() when the estimate resolves or fails.
 let feeStatus = FEE_PENDING;
 let feeWei = null;
+// The fee fields a max ETH send is signed with: those of the estimate its
+// amount was derived from. Null for any other send, which ethers prices from
+// the node at signing time.
+let maxSendFees = null;
 
 function restore() {
     const d = state.viewData;
@@ -61,11 +67,6 @@ function restore() {
     }
 }
 
-function blockieHtml(address) {
-    const src = makeBlockie(address);
-    return `<img src="${escapeHtml(src)}" width="48" height="48" style="image-rendering:pixelated;border-radius:50%;display:inline-block">`;
-}
-
 function confirmAddressHtml(address, ensName, title) {
     const blockie = blockieHtml(address);
     return (
@@ -81,16 +82,30 @@ function valueWithUsd(text, usdAmount) {
     return text;
 }
 
+// The Amount line, with its USD value. A max ETH send's line is drawn again
+// once its amount is re-derived from the fee estimate.
+function renderAmount(txInfo) {
+    const isErc20 = txInfo.token !== "ETH";
+    const rawSymbol = isErc20 ? txInfo.tokenSymbol || "?" : nativeCurrency();
+    const price = isErc20 ? getPrice(rawSymbol) : getPrice("ETH");
+    const amountUsd = price ? parseFloat(txInfo.amount) * price : null;
+    $("confirm-amount").textContent = valueWithUsd(
+        txInfo.amount + " " + displaySymbol(rawSymbol),
+        amountUsd,
+    );
+}
+
 function show(txInfo) {
     pendingTx = txInfo;
     feeStatus = FEE_PENDING;
     feeWei = null;
+    maxSendFees = null;
 
     const isErc20 = txInfo.token !== "ETH";
     // The raw symbol is the price-table key; the capped one is what the
     // screen says. Truncating before the lookup would silently drop the
     // price of any token whose symbol is long enough to be capped.
-    const rawSymbol = isErc20 ? txInfo.tokenSymbol || "?" : "ETH";
+    const rawSymbol = isErc20 ? txInfo.tokenSymbol || "?" : nativeCurrency();
     const symbol = displaySymbol(rawSymbol);
 
     // Transaction type
@@ -98,7 +113,7 @@ function show(txInfo) {
         $("confirm-type").textContent =
             "ERC-20 token transfer (" + symbol + ")";
     } else {
-        $("confirm-type").textContent = "Native ETH transfer";
+        $("confirm-type").textContent = "Native " + symbol + " transfer";
     }
 
     // Token contract section (ERC-20 only)
@@ -131,18 +146,11 @@ function show(txInfo) {
     );
     $("confirm-to-ens").classList.add("hidden");
 
-    // Amount (with inline USD)
+    renderAmount(txInfo);
-    const ethPrice = getPrice("ETH");
-    const tokenPrice = getPrice(rawSymbol);
-    const amountNum = parseFloat(txInfo.amount);
-    const price = isErc20 ? tokenPrice : ethPrice;
-    const amountUsd = price ? amountNum * price : null;
-    $("confirm-amount").textContent = valueWithUsd(
-        txInfo.amount + " " + symbol,
-        amountUsd,
-    );
 
     // Balance (with inline USD)
+    const ethPrice = getPrice("ETH");
+    const tokenPrice = getPrice(rawSymbol);
     if (isErc20) {
         // null is a balance whose scale nothing knows, not a balance of zero
         // (https://git.eeqj.de/sneak/AutistMask/issues/349). The send is
@@ -162,7 +170,7 @@ function show(txInfo) {
         const bal = txInfo.balance || "0";
         const balUsd = ethPrice ? parseFloat(bal) * ethPrice : null;
         $("confirm-balance").textContent = valueWithUsd(
-            truncateAmountNeverZero(bal) + " ETH",
+            truncateAmountNeverZero(bal) + " " + symbol,
             balUsd,
         );
     }
@@ -197,6 +205,19 @@ function show(txInfo) {
     // estimate landing later never moves anything.
     $("confirm-amount-fee-error").classList.toggle("hidden", isErc20);
     $("confirm-gas-error").classList.toggle("hidden", !isErc20);
+    $("confirm-gas-error").textContent =
+        "You do not have enough " +
+        nativeCurrency() +
+        " to pay the network fee for this transfer. Please add " +
+        nativeCurrency() +
+        " to this address and try again.";
+
+    // Shown later, once checkRecipientHistory() finds a contract.
+    $("confirm-contract-warning").textContent =
+        "WARNING: The recipient is a smart contract. Sending " +
+        nativeCurrency() +
+        " or tokens directly to a contract may result in permanent loss of" +
+        " funds.";
 
     // The fee-unknown message names its cause, which is also known here.
     // Without the token's scale estimateGas() cannot encode the transfer, so
@@ -245,7 +266,9 @@ function show(txInfo) {
 // touches already occupies its space, so re-running it never moves anything.
 function renderValidation(txInfo) {
     const isErc20 = txInfo.token !== "ETH";
-    const symbol = isErc20 ? displaySymbol(txInfo.tokenSymbol || "?") : "ETH";
+    const symbol = isErc20
+        ? displaySymbol(txInfo.tokenSymbol || "?")
+        : nativeCurrency();
 
     const { canSend, codes } = validateTransfer({
         isErc20,
@@ -258,7 +281,7 @@ function renderValidation(txInfo) {
 
     // Messages carrying the user's own numbers are built here; the fixed
     // sentences live in the reserved elements in index.html, except the
-    // fee-unknown one, which show() sets.
+    // gas and fee-unknown ones, which show() sets.
     const messages = [];
     if (codes.includes(CODES.AMOUNT_INVALID)) {
         messages.push("Please enter a valid amount to send.");
@@ -287,9 +310,13 @@ function renderValidation(txInfo) {
         messages.push(
             "Insufficient balance. You have " +
                 truncateAmountNeverZero(txInfo.balance || "0") +
-                " ETH but are trying to send " +
+                " " +
+                symbol +
+                " but are trying to send " +
                 txInfo.amount +
-                " ETH.",
+                " " +
+                symbol +
+                ".",
         );
     }
 
@@ -360,8 +387,8 @@ async function estimateGas(txInfo) {
         }
 
         // What the node will require to be reserved, which is what the gate
-        // must be: the send pins no fee fields, so it is broadcast as a
+        // must be: the send is broadcast as a type-2 transaction priced at
-        // type-2 transaction priced at maxFeePerGas.
+        // maxFeePerGas, which only a max ETH send pins (see below).
         const gasCostWei = feeReserveWei(gasLimit, feeData);
         if (gasCostWei === null) {
             throw new Error("no usable gas price from the provider");
@@ -378,21 +405,51 @@ async function estimateGas(txInfo) {
         // The fee line goes through formatFee(), as the approval screen's
         // does, so the same fee reads the same on both.
         if (estimateWei !== null && estimateWei < gasCostWei) {
-            $("confirm-fee-amount").textContent = "~" + formatFee(estimateWei);
+            $("confirm-fee-amount").textContent =
+                "~" + formatFee(estimateWei, nativeCurrency());
             $("confirm-fee-reserve").textContent =
                 "up to " +
                 truncateAmountNeverZero(formatEther(gasCostWei)) +
-                " ETH reserved";
+                " " +
+                nativeCurrency() +
+                " reserved";
             setVisible("confirm-fee-reserve", true);
         } else {
             // No spread to report: either there is no estimate, or the node
             // quotes a gas price at or above maxFeePerGas, so the expected
             // cost is not below the reserve. Show the reserve alone.
-            $("confirm-fee-amount").textContent = formatFee(gasCostWei);
+            $("confirm-fee-amount").textContent = formatFee(
+                gasCostWei,
+                nativeCurrency(),
+            );
             setVisible("confirm-fee-reserve", false);
         }
         feeStatus = FEE_KNOWN;
         feeWei = gasCostWei;
+        // A max ETH send is the balance minus this estimate's reserve, not the
+        // Send screen's, and is signed with this estimate's fee fields: fees
+        // fetched again at signing could exceed the reserve it leaves, and the
+        // node would refuse it for want of funds. Where the balance no longer
+        // covers the fee, the amount is left as it is and the balance check
+        // below says so.
+        if (txInfo.max && txInfo.token === "ETH") {
+            const amount = maxEthAmount(txInfo.balance, gasCostWei);
+            if (amount !== null) {
+                txInfo.amount = amount;
+                renderAmount(txInfo);
+                // Priced as feeReserveWei() priced the reserve: maxFeePerGas,
+                // or gasPrice on a network with no type-2 pricing.
+                if (feeData.maxFeePerGas != null) {
+                    maxSendFees = {
+                        gasLimit,
+                        maxFeePerGas: feeData.maxFeePerGas,
+                        maxPriorityFeePerGas: feeData.maxPriorityFeePerGas,
+                    };
+                } else {
+                    maxSendFees = { gasLimit, gasPrice: feeData.gasPrice };
+                }
+            }
+        }
         renderValidation(txInfo);
     } catch (e) {
         log.errorf("gas estimation failed:", e.shortMessage || e.message);
@@ -406,18 +463,19 @@ async function estimateGas(txInfo) {
 }
 
 // Populate the transaction this send describes, enforce the fee bound against
-// the fees that were actually filled in, then sign and broadcast it. The send
+// the fees that were actually filled in, then sign and broadcast it. Apart
-// pins no fee fields, so ethers fills maxFeePerGas and the gas limit from what
+// from a max ETH send, which passes its estimate's fee fields as `fees`, the
-// the configured RPC node answers, with nothing otherwise bounding what a
+// send pins no fee fields, so ethers fills maxFeePerGas and the gas limit from
+// what the configured RPC node answers, with nothing otherwise bounding what a
 // hostile node can set — the dApp path's ceilings never reached this one.
 // Populating before the check is what makes assertWithinCeilings() see the
 // same numbers that would be signed; it throws an ApprovalMismatchError when
 // the product gasLimit × maxFeePerGas is over the bound, which the caller
 // shows in the reserved error area rather than sending.
-async function populateVerifyAndSend(connectedSigner, tx) {
+async function populateVerifyAndSend(connectedSigner, tx, fees = null) {
     let request;
     if (tx.token === "ETH") {
-        request = { to: tx.to, value: parseEther(tx.amount) };
+        request = { to: tx.to, value: parseEther(tx.amount), ...fees };
     } else {
         const contract = new Contract(tx.token, ERC20_ABI, connectedSigner);
         // The contract's decimals() is read to be COMPARED with the scale the
@@ -508,6 +566,10 @@ function init(_ctx) {
         $("btn-confirm-send").disabled = true;
         $("btn-confirm-send").classList.add("text-muted");
 
+        // The network it is sent on. The wait, success and error screens
+        // label its amount by this, not by the network active when they draw.
+        pendingTx.chainId = currentNetwork().chainId;
+
         let tx;
         try {
             const signer = getSignerForAddress(
@@ -518,7 +580,11 @@ function init(_ctx) {
             const provider = getProvider(state.rpcUrl, state.networkId);
             const connectedSigner = signer.connect(provider);
 
-            tx = await populateVerifyAndSend(connectedSigner, pendingTx);
+            tx = await populateVerifyAndSend(
+                connectedSigner,
+                pendingTx,
+                maxSendFees,
+            );
 
             // Best-effort: clear decrypted secret after use.
             // Note: JS strings are immutable; this nulls the reference but

src/popup/views/deleteWallet.js

@@ -12,6 +12,7 @@ const {
     removeWalletFromState,
     broadcastActiveChanged,
 } = require("../../shared/walletDelete");
+const { INVISIBLE_CHARACTERS } = require("../../shared/symbolSpoof");
 
 let deleteWalletIndex = null;
 let lostPasswordIndex = null;
@@ -20,21 +21,31 @@ let ctx = null;
 // The name shown for a wallet, and on the lost-password screen the string
 // the user has to type back. One function so the two cannot disagree: a
 // confirmation that asks for a name other than the one on screen is
-// unusable.
+// unusable. A name that shows nothing at all (only spaces, or only
+// zero-width characters) is replaced by "Wallet N" for the same reason:
+// there would be nothing on screen to type back.
 function displayName(walletIdx) {
     const wallet = state.wallets[walletIdx];
-    return (wallet && wallet.name) || "Wallet " + (walletIdx + 1);
+    const name = wallet && wallet.name;
+    if (name && confirmKey(name)) return name;
+    return "Wallet " + (walletIdx + 1);
 }
 
 // What the typed confirmation and the wallet name are compared as. HTML
 // collapses runs of whitespace when it renders the name, so a wallet named
 // "My  Wallet" with two spaces DISPLAYS as "My Wallet": the user cannot
 // see the second space and cannot type a string that matches the stored
-// name. Comparing collapsed on both sides is what keeps the confirmation
+// name. Characters that paint nothing, such as a zero-width space, are
-// satisfiable, on the one screen whose whole purpose is unwedging a user
+// invisible the same way and are removed first. Comparing this form on
-// who is already stuck. Case and surrounding space go the same way.
+// both sides is what keeps the confirmation satisfiable, on the one screen
+// whose whole purpose is unwedging a user who is already stuck. Case and
+// surrounding space go the same way.
 function confirmKey(name) {
-    return name.trim().replace(/\s+/g, " ").toLowerCase();
+    return name
+        .replace(INVISIBLE_CHARACTERS, "")
+        .trim()
+        .replace(/\s+/g, " ")
+        .toLowerCase();
 }
 
 // Drop the password from the DOM and the wallet selection from the
@@ -174,14 +185,16 @@ function init(_ctx) {
             return;
         }
 
-        // Case, surrounding spaces and repeated inner spaces are not part
+        // Case, surrounding spaces, repeated inner spaces and invisible
-        // of the confirmation; see confirmKey(). This asks whether the
+        // characters are not part of the confirmation; see confirmKey().
-        // user knows which wallet they are on; it is not a secret, and
+        // This asks whether the user knows which wallet they are on; it is
-        // refusing "wallet 2" for "Wallet 2" would only teach the user to
+        // not a secret, and refusing "wallet 2" for "Wallet 2" would only
-        // distrust the control.
+        // teach the user to distrust the control. An empty field is
-        const typed = $("delete-wallet-lost-name-input").value;
+        // refused whatever the wallet is called, so no stored name can
+        // ever be confirmed by typing nothing.
+        const typed = confirmKey($("delete-wallet-lost-name-input").value);
         const expected = displayName(lostPasswordIndex);
-        if (confirmKey(typed) !== confirmKey(expected)) {
+        if (typed === "" || typed !== confirmKey(expected)) {
             $("delete-wallet-lost-flash").textContent =
                 "That is not the name of this wallet. Type " +
                 expected +

src/popup/views/helpers.js

@@ -13,10 +13,12 @@
 // reasoning behind it are; it is re-exported below so views keep importing
 // it from here.
 const { formatEther } = require("ethers");
+const makeBlockie = require("ethereum-blockies-base64");
 const {
     truncateAmountNeverZero,
     isBelowOneMillionth,
 } = require("../../shared/amountDisplay");
+const { resolveTokenSymbol } = require("../../shared/approvalAmount");
 const { DEBUG } = require("../../shared/constants");
 const { escapeHtml } = require("../../shared/html");
 const { isDebug } = require("../../shared/log");
@@ -52,9 +54,8 @@ const VIEWS = [
     "export-privkey",
     "show-phrase",
     // Shown by src/popup/views/stateRecovery.js when the stored profile
-    // cannot be read. It is never reached through showView() — by then the
+    // cannot be read, never by showView() (see there), but listed so that
-    // state singleton this file writes on every navigation refuses to be read
+    // every view-hiding loop covers it.
-    // — but it is listed so that every view-hiding loop covers it.
     "state-recovery",
 ];
 
@@ -85,12 +86,28 @@ function hideError(id) {
     el.style.visibility = "hidden";
 }
 
+// Set when src/popup/index.js passes the recovery screen to showView(), and
+// never cleared. Kept in memory for this popup's life, never in
+// state.currentView, which is saved: a popup opened later must not inherit it.
+let stateRecoveryShown = false;
+
 function showView(name) {
+    // The recovery screen, once up, is never replaced: work still running
+    // when it went up, such as a transaction wait, must not take the user off
+    // it or clear what they exported or typed there
+    // (https://git.eeqj.de/sneak/AutistMask/issues/373).
+    if (stateRecoveryShown) return;
     const leaving = state.currentView;
     if (leaving && leaving !== name) {
         const onLeave = viewLeaveHandlers.get(leaving);
         if (onLeave) onLeave();
     }
+    // Passed here only so the screen it replaces is left like any other;
+    // stateRecovery.show() raises it, and it is never the current view.
+    if (name === "state-recovery") {
+        stateRecoveryShown = true;
+        return;
+    }
     for (const v of VIEWS) {
         const el = document.getElementById(`view-${v}`);
         if (el) {
@@ -252,16 +269,42 @@ function unknownableAmount(balance) {
     return Number.isFinite(n) ? n : null;
 }
 
+// The active network's native token symbol, `ETH` on mainnet and `SepoliaETH`
+// on Sepolia, as src/shared/networks.js names it. The wallet's balances and
+// the Send and confirmation screens, which send on the active network, label a
+// native amount with this; a transaction already made or requested is labelled
+// by its own chain id, through nativeCurrencyByChainId() in networks.js. The
+// "ETH" that state.selectedToken and txInfo.token hold is the native token's
+// id, not its label, and stays "ETH" on every network.
+function nativeCurrency() {
+    return currentNetwork().nativeCurrency;
+}
+
+// The symbol shown for a token line, resolved from the bundled list, the
+// tokens the user tracks, and the explorer's report — the same chain the
+// amount line's scale comes from. Null when no source names one, so the token
+// lines keep saying `Unknown token` for a token nothing knows.
+function tokenLabel(address) {
+    return resolveTokenSymbol(address, {
+        trackedTokens: state.trackedTokens,
+        wallets: state.wallets,
+    });
+}
+
 // A network fee in wei as the confirmation and approval screens both show it:
-// the ETH figure through truncateAmountNeverZero(), then its USD value when the
+// the ETH figure through truncateAmountNeverZero() and labelled `symbol`, the
-// ETH price is known. The USD value is of the exact fee, not of the truncated
+// native currency of the network the fee is paid on, then its USD value when
-// figure.
+// the ETH price is known. The USD value is of the exact fee, not of the
-function formatFee(wei) {
+// truncated figure.
+function formatFee(wei, symbol) {
     const eth = formatEther(wei);
     const ethPrice = getPrice("ETH");
     const usd = ethPrice ? formatUsd(parseFloat(eth) * ethPrice) : "";
     return (
-        truncateAmountNeverZero(eth) + " ETH" + (usd ? " (" + usd + ")" : "")
+        truncateAmountNeverZero(eth) +
+        " " +
+        symbol +
+        (usd ? " (" + usd + ")" : "")
     );
 }
 
@@ -282,7 +325,7 @@ function balanceLine(symbol, amount, price, tokenId) {
     const qty = amount === null ? "quantity unknown" : amount.toFixed(4);
     const usd =
         price && amount !== null
-            ? formatUsd(amount * price) || " "
+            ? escapeHtml(formatUsd(amount * price)) || " "
             : " ";
     // tokenId is a contract address out of the same explorer JSON, and it
     // lands inside a quoted attribute.
@@ -303,7 +346,7 @@ function balanceLine(symbol, amount, price, tokenId) {
 
 function balanceLinesForAddress(addr, trackedTokens, showZero) {
     let html = balanceLine(
-        "ETH",
+        nativeCurrency(),
         parseFloat(addr.balance || "0"),
         getPrice("ETH"),
         "ETH",
@@ -416,6 +459,11 @@ function addressDotHtml(address) {
     return `<span style="width:8px;height:8px;border-radius:50%;display:inline-block;background:${color};margin-right:4px;vertical-align:middle;flex-shrink:0;"></span>`;
 }
 
+function blockieHtml(address) {
+    const src = makeBlockie(address);
+    return `<img src="${escapeHtml(src)}" width="48" height="48" style="image-rendering:pixelated;border-radius:50%;display:inline-block">`;
+}
+
 // Look up an address across all wallets and return its title
 // (e.g. "Address 1.2") or null if it's not one of ours.
 function addressTitle(address, wallets) {
@@ -462,6 +510,9 @@ function formatAddressHtml(address, ensName, maxLen, title) {
     return renderAddressHtml(address, { title, ensName, maxLen });
 }
 
+// A transaction's time as every screen shows it (README, Display
+// Consistency): the ISO datetime, in UTC when the UTC Timestamps setting is
+// on, and the relative age. Views import these two; they keep no copies.
 function isoDate(timestamp) {
     const d = new Date(timestamp * 1000);
     const pad = (n) => String(n).padStart(2, "0");
@@ -660,9 +711,11 @@ module.exports = {
     balanceLinesForAddress,
     addressHoldsFunds,
     unknownableAmount,
+    nativeCurrency,
+    tokenLabel,
     formatFee,
-    addressColor,
     addressDotHtml,
+    blockieHtml,
     escapeHtml,
     displaySymbol,
     addressTitle,
@@ -672,7 +725,6 @@ module.exports = {
     renderAddressHtml,
     copyableHtml,
     attachCopyHandlers,
-    etherscanAddressUrl,
     etherscanLinkHtml,
     explorerUrl,
     EXT_ICON,

src/popup/views/home.js

@@ -10,11 +10,17 @@ const {
     addressTitle,
     escapeHtml,
     displaySymbol,
+    nativeCurrency,
     renderAddressHtml,
     attachCopyHandlers,
     pushCurrentView,
 } = require("./helpers");
-const { state, saveState, currentAddress } = require("../../shared/state");
+const {
+    state,
+    saveState,
+    currentAddress,
+    currentNetwork,
+} = require("../../shared/state");
 const { notify } = require("../../shared/browserApi");
 const {
     updateSendBalance,
@@ -57,7 +63,7 @@ function renderTotalValue() {
     const ethPrice = getPrice("ETH");
     if (priceEl) {
         priceEl.innerHTML = ethPrice
-            ? formatUsd(ethPrice) + " USD/ETH"
+            ? escapeHtml(formatUsd(ethPrice) + " USD/ETH")
             : " ";
     }
 
@@ -68,12 +74,13 @@ function renderTotalValue() {
         return;
     }
     const ethBal = parseFloat(addr.balance || "0");
-    const ethStr = ethBal.toFixed(4) + " ETH";
+    const ethStr = ethBal.toFixed(4) + " " + nativeCurrency();
     const ethUsd = ethPrice ? " (" + formatUsd(ethBal * ethPrice) + ")" : "";
     el.textContent = ethStr + ethUsd;
 
     if (subEl) {
-        subEl.innerHTML = formatAddressTotal(getAddressValue(addr)) || " ";
+        subEl.innerHTML =
+            escapeHtml(formatAddressTotal(getAddressValue(addr))) || " ";
     }
 }
 
@@ -182,7 +189,11 @@ async function loadHomeTxs(ctx) {
 
     try {
         const fetches = allAddresses.map((addr) =>
-            fetchRecentTransactions(addr, state.blockscoutUrl),
+            fetchRecentTransactions(
+                addr,
+                state.blockscoutUrl,
+                currentNetwork().chainId,
+            ),
         );
         const results = await Promise.all(fetches);
 
@@ -270,7 +281,7 @@ function walletListHtml() {
             }
             html += `<div class="am-address text-xs">${escapeHtml(addr.address)}</div>`;
             const addrTotal = formatAddressTotal(getAddressValue(addr));
-            html += `<div class="text-xs text-muted text-right min-h-[1rem]">${addrTotal || "&nbsp;"}</div>`;
+            html += `<div class="text-xs text-muted text-right min-h-[1rem]">${escapeHtml(addrTotal) || "&nbsp;"}</div>`;
             html += balanceLinesForAddress(
                 addr,
                 state.trackedTokens,

src/popup/views/send.js

@@ -5,6 +5,8 @@ const {
     showFlash,
     addressTitle,
     displaySymbol,
+    escapeHtml,
+    nativeCurrency,
     renderAddressHtml,
     attachCopyHandlers,
     goBack,
@@ -20,10 +22,25 @@ const {
     truncateAmountNeverZero,
     isBelowOneMillionth,
 } = require("../../shared/amountDisplay");
-const { getAddress } = require("ethers");
+const {
+    feeReserveWei,
+    maxEthAmount,
+    maxTokenAmount,
+} = require("../../shared/txValidation");
+const { log } = require("../../shared/log");
+const { getAddress, parseEther } = require("ethers");
 
 const ZERO_ADDRESS = "0x0000000000000000000000000000000000000000";
 
+// Whether the amount field holds what Max filled in. The confirmation screen
+// re-derives a max ETH amount from its own fee estimate; typing in the field
+// makes it an ordinary amount again.
+let amountIsMax = false;
+
+// Counts the times the Send screen has opened, so a Max fee estimate started
+// before it was last opened fills nothing in.
+let sendScreenOpenings = 0;
+
 /**
  * Validate a destination address string.
  * Returns { valid: true } or { valid: false, error: "..." }.
@@ -124,7 +141,7 @@ function updateToValidation() {
 
 function renderSendTokenSelect(addr) {
     const sel = $("send-token");
-    sel.innerHTML = '<option value="ETH">ETH</option>';
+    sel.innerHTML = `<option value="ETH">${escapeHtml(nativeCurrency())}</option>`;
     const fraudSet = new Set(
         (state.fraudContracts || []).map((a) => a.toLowerCase()),
     );
@@ -204,7 +221,8 @@ function updateSendBalance() {
         $("send-balance").textContent =
             "Current balance: " +
             truncateAmountNeverZero(addr.balance || "0") +
-            " ETH";
+            " " +
+            nativeCurrency();
     } else {
         const symbol = resolveSymbol(
             token,
@@ -226,9 +244,102 @@ function updateSendBalance() {
     }
 }
 
+// Fill the amount field with the most the selected holding can send: a
+// token's whole balance (cut to 18 decimal places), or for ETH the exact
+// balance minus the fee reserve the confirmation screen checks against, never
+// the rounded balance the screen shows. Where there is nothing to fill in, a
+// flash message says why.
+async function fillMaxAmount() {
+    const addr = currentAddress();
+    if (!addr) return;
+    const token = state.selectedToken || $("send-token").value;
+
+    if (token !== "ETH") {
+        const bal = tokenBalanceAndDecimals(addr, token).tokenBalance;
+        if (bal == null) {
+            showFlash("This token's balance is unknown.");
+            return;
+        }
+        const amount = maxTokenAmount(bal);
+        if (!(parseFloat(amount) > 0)) {
+            showFlash("This token's balance is zero.");
+            return;
+        }
+        $("send-amount").value = amount;
+        amountIsMax = true;
+        return;
+    }
+
+    // The fee is estimated for this recipient, as the confirmation screen
+    // estimates it: sending to a contract can cost more gas.
+    const to = $("send-to").value.trim();
+    if (!validateToAddress(to).valid) {
+        showFlash("Please enter a recipient address first.");
+        return;
+    }
+    const typed = $("send-amount").value;
+    const opening = sendScreenOpenings;
+    let feeWei = null;
+    try {
+        const provider = getProvider(state.rpcUrl, state.networkId);
+        const [feeData, gasLimit] = await Promise.all([
+            provider.getFeeData(),
+            provider.estimateGas({
+                from: addr.address,
+                to,
+                value: parseEther(addr.balance || "0"),
+            }),
+        ]);
+        feeWei = feeReserveWei(gasLimit, feeData);
+    } catch (e) {
+        log.errorf(
+            "max amount fee estimate failed:",
+            e.shortMessage || e.message,
+        );
+    }
+    // While the estimate was in flight the user left the screen (and perhaps
+    // opened it again), typed an amount, or changed the address, the holding
+    // or the recipient: what they did wins.
+    if (
+        state.currentView !== "send" ||
+        sendScreenOpenings !== opening ||
+        currentAddress()?.address !== addr.address ||
+        (state.selectedToken || $("send-token").value) !== token ||
+        $("send-to").value.trim() !== to ||
+        $("send-amount").value !== typed
+    ) {
+        return;
+    }
+
+    if (feeWei === null) {
+        showFlash("The network fee could not be estimated.");
+        return;
+    }
+    const amount = maxEthAmount(addr.balance, feeWei);
+    if (amount === null) {
+        showFlash("Your balance does not cover the network fee.");
+        return;
+    }
+    $("send-amount").value = amount;
+    amountIsMax = true;
+}
+
 function init(_ctx) {
     ctx = _ctx;
-    $("send-token").addEventListener("change", updateSendBalance);
+    $("send-token").addEventListener("change", () => {
+        // A filled-in maximum is the maximum of the holding it was filled in
+        // for.
+        if (amountIsMax) {
+            $("send-amount").value = "";
+            amountIsMax = false;
+        }
+        updateSendBalance();
+    });
+
+    $("btn-send-max").addEventListener("click", fillMaxAmount);
+    $("send-amount").addEventListener("input", () => {
+        amountIsMax = false;
+    });
 
     // Initial state: disable review button until address is entered
     $("btn-send-review").disabled = true;
@@ -305,6 +416,7 @@ function init(_ctx) {
             tokenSymbol: tokenSymbol,
             tokenBalance: tokenBalance,
             tokenDecimals: tokenDecimals,
+            max: amountIsMax,
         });
     });
 
@@ -315,7 +427,10 @@ function init(_ctx) {
     });
 }
 
+// Called each time the Send screen opens, with its fields cleared.
 function resetSendValidation() {
+    sendScreenOpenings++;
+    amountIsMax = false;
     const errorEl = $("send-to-error");
     const btn = $("btn-send-review");
     if (errorEl) errorEl.textContent = "";

src/popup/views/settingsAddToken.js

@@ -12,7 +12,7 @@ function isTracked(address) {
     return state.trackedTokens.some((t) => t.address.toLowerCase() === lower);
 }
 
-function tokenLabel(t) {
+function nameAndSymbol(t) {
     return t.name ? t.name + " (" + t.symbol + ")" : t.symbol;
 }
 
@@ -60,7 +60,7 @@ function renderDropdown() {
     let html = '<option value="">-- select --</option>';
     for (const t of tokens) {
         const tracked = isTracked(t.address);
-        const label = tokenLabel(t) + (tracked ? " (tracked)" : "");
+        const label = nameAndSymbol(t) + (tracked ? " (tracked)" : "");
         html +=
             `<option value="${escapeHtml(t.address)}"` +
             ` data-symbol="${escapeHtml(t.symbol)}"` +

src/popup/views/stateRecovery.js

@@ -3,8 +3,10 @@
 // Everything else in the popup assumes a loaded profile: showView() reads and
 // writes the state singleton, every view renders from it, and the Settings
 // gear leads to a screen that does both. None of that is available here — by
-// the time this runs, loadState() has REFUSED, deliberately, and reading the
+// the time this runs, the stored record has been REFUSED, deliberately: at
-// singleton throws (https://git.eeqj.de/sneak/AutistMask/issues/311).
+// open loadState() refused it and reading the singleton throws
+// (https://git.eeqj.de/sneak/AutistMask/issues/311), and under an open popup
+// a save refused it (https://git.eeqj.de/sneak/AutistMask/issues/373).
 //
 // So this module talks to the DOM directly and touches no state at all. It is
 // the one screen that must work when nothing else can, which is also why it
@@ -170,6 +172,11 @@ function wire() {
  *     refused, or its sentence.
  */
 function show(problem) {
+    // Already up: a later save that trips over the same record, such as a
+    // refresh that was in flight when the screen went up, must not clear what
+    // the user has exported or typed here.
+    if (!$("view-state-recovery").classList.contains("hidden")) return;
+
     const sentence =
         (problem && (problem.problem || problem.message)) || String(problem);
 

src/popup/views/transactionDetail.js

@@ -13,6 +13,7 @@ const {
     isoDate,
     timeAgo,
     renderAddressHtml,
+    blockieHtml,
     attachCopyHandlers,
     copyableHtml,
     etherscanLinkHtml,
@@ -21,8 +22,8 @@ const {
     goBack,
 } = require("./helpers");
 const { state } = require("../../shared/state");
+const { nativeCurrencyByChainId } = require("../../shared/networks");
 const { formatEther, formatUnits } = require("ethers");
-const makeBlockie = require("ethereum-blockies-base64");
 const { log, debugFetch } = require("../../shared/log");
 const { decodeCalldata } = require("./approval");
 
@@ -41,13 +42,10 @@ function getTransactionType(tx) {
             return "Token Approval";
         return "Contract Call";
     }
-    if (tx.symbol && tx.symbol !== "ETH") return "ERC-20 Token Transfer";
+    // By the token contract, not the symbol: a token chooses its own symbol
-    return "Native ETH Transfer";
+    // and can report the native token's, but only a token transfer has one.
-}
+    if (tx.contractAddress) return "ERC-20 Token Transfer";
-
+    return "Native " + nativeCurrencyByChainId(tx.chainId) + " Transfer";
-function blockieHtml(address) {
-    const src = makeBlockie(address);
-    return `<img src="${escapeHtml(src)}" width="48" height="48" style="image-rendering:pixelated;border-radius:50%;display:inline-block">`;
 }
 
 function txAddressHtml(address, ensName, title) {
@@ -84,6 +82,11 @@ function show(tx) {
             isContractCall: tx.isContractCall || false,
             method: tx.method || null,
             contractAddress: tx.contractAddress || null,
+            // The network the history entry was read from. The type line and
+            // the fee are in its native currency, not the active network's:
+            // a site can switch the active network before a later popup
+            // shows this screen again.
+            chainId: tx.chainId,
         },
     };
     render();
@@ -179,7 +182,7 @@ function render() {
         if (el) el.classList.add("hidden");
     }
 
-    loadFullTxDetails(tx.hash, tx.to);
+    loadFullTxDetails(tx.hash, tx.to, tx.chainId);
 
     const isoStr = isoDate(tx.timestamp);
     $("tx-detail-time").innerHTML =
@@ -197,7 +200,7 @@ function showDetailField(sectionId, contentId, value) {
     section.classList.remove("hidden");
 }
 
-function populateOnChainDetails(txData) {
+function populateOnChainDetails(txData, chainId) {
     // Block number
     if (txData.block_number != null) {
         const blockLink = explorerUrl("block", String(txData.block_number));
@@ -227,7 +230,7 @@ function populateOnChainDetails(txData) {
         showDetailField(
             "tx-detail-fee-section",
             "tx-detail-fee",
-            feeEth + " ETH",
+            feeEth + " " + nativeCurrencyByChainId(chainId),
         );
     }
 
@@ -287,7 +290,7 @@ function populateOnChainDetails(txData) {
     }
 }
 
-async function loadFullTxDetails(txHash, toAddress) {
+async function loadFullTxDetails(txHash, toAddress, chainId) {
     const section = $("tx-detail-calldata-section");
     const actionEl = $("tx-detail-calldata-action");
     const detailsEl = $("tx-detail-calldata-details");
@@ -304,7 +307,7 @@ async function loadFullTxDetails(txHash, toAddress) {
         const txData = await resp.json();
 
         // Populate on-chain detail fields (block, nonce, gas, fee)
-        populateOnChainDetails(txData);
+        populateOnChainDetails(txData, chainId);
 
         const inputData = txData.raw_input || txData.input || null;
         if (!inputData || inputData === "0x") return;

src/popup/views/txStatus.js

@@ -13,9 +13,10 @@ const {
     explorerUrl,
     displaySymbol,
     clearViewStack,
+    tokenLabel,
 } = require("./helpers");
-const { resolveTokenSymbol } = require("../../shared/approvalAmount");
 const { state } = require("../../shared/state");
+const { nativeCurrencyByChainId } = require("../../shared/networks");
 const { getProvider } = require("../../shared/balances");
 const { log } = require("../../shared/log");
 
@@ -86,9 +87,13 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
     endWait();
     const id = waitId;
 
+    // A native amount, here and on the success and error screens, is in the
+    // native currency of txInfo.chainId, the network the transaction was sent
+    // on, not the active network's: a site can switch the active network
+    // while this screen is open or before a later popup resumes it.
     const symbol =
         txInfo.token === "ETH"
-            ? "ETH"
+            ? nativeCurrencyByChainId(txInfo.chainId)
             : displaySymbol(txInfo.tokenSymbol || "?");
     $("wait-tx-summary").textContent = txInfo.amount + " " + symbol;
     $("wait-tx-to").innerHTML = toAddressHtml(txInfo.to);
@@ -193,9 +198,10 @@ function showWait(txInfo, txHash) {
 // an object merely missing one of them throws a TypeError out of
 // restoreView() — which init() does not guard, skipping the rest of popup
 // init and leaving wait-tx on screen with no back control. A non-numeric
-// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.token and
+// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.token,
-// txInfo.tokenSymbol are deliberately unchecked: they are compared and
+// txInfo.tokenSymbol and txInfo.chainId are deliberately unchecked: they are
-// coalesced rather than dereferenced, and tokenSymbol is null for ETH.
+// compared and coalesced rather than dereferenced, and tokenSymbol is null for
+// ETH.
 function restoreWait() {
     const d = state.viewData;
     if (!d || !d.pendingWait) return false;
@@ -223,7 +229,7 @@ function showSuccess(txInfo, txHash, blockNumber) {
 
     const symbol =
         txInfo.token === "ETH"
-            ? "ETH"
+            ? nativeCurrencyByChainId(txInfo.chainId)
             : displaySymbol(txInfo.tokenSymbol || "?");
     state.viewData = {
         amount: txInfo.amount,
@@ -237,17 +243,6 @@ function showSuccess(txInfo, txHash, blockNumber) {
     ctx.doRefreshAndRender();
 }
 
-// The symbol shown for a decoded token line, resolved from the bundled list,
-// the tokens the user tracks, and the explorer's report — the same chain the
-// approval screen uses. Null when no source names one, so the line keeps
-// saying `Unknown token`.
-function tokenLabel(address) {
-    return resolveTokenSymbol(address, {
-        trackedTokens: state.trackedTokens,
-        wallets: state.wallets,
-    });
-}
-
 function decodedDetailsHtml(decoded) {
     if (!decoded || !decoded.details) return "";
     let html = `<div class="border border-border border-dashed p-2 mb-3">`;
@@ -320,7 +315,7 @@ function showError(txInfo, txHash, message) {
 
     const symbol =
         txInfo.token === "ETH"
-            ? "ETH"
+            ? nativeCurrencyByChainId(txInfo.chainId)
             : displaySymbol(txInfo.tokenSymbol || "?");
     state.viewData = {
         amount: txInfo.amount,

src/shared/approvalVerify.js

@@ -54,9 +54,11 @@ const {
     formatEther,
     getAddress,
     getBytes,
+    toQuantity,
     verifyMessage,
     verifyTypedData,
 } = require("ethers");
+const { nativeCurrencyByChainId } = require("./networks");
 
 // The only transaction types this wallet signs: legacy, EIP-2930 and
 // EIP-1559. populateTransaction() produces nothing else, so nothing else can
@@ -407,12 +409,21 @@ function assertWithinCeilings(tx) {
             price = normalizeQuantity(tx.gasPrice, "gas price");
         }
         if (price !== null && gasLimit * price > MAX_TOTAL_FEE) {
+            // The fee is paid in the native currency of the network the
+            // transaction is for. Every caller's transaction names it.
+            const nativeCurrency = nativeCurrencyByChainId(
+                present(tx.chainId) ? toQuantity(tx.chainId) : null,
+            );
             throw refuse(
                 "This transaction would allow a network fee of up to " +
                     formatEther(gasLimit * price) +
-                    " ETH, which is more than the " +
+                    " " +
+                    nativeCurrency +
+                    ", which is more than the " +
                     formatEther(MAX_TOTAL_FEE) +
-                    " ETH this wallet will sign for.",
+                    " " +
+                    nativeCurrency +
+                    " this wallet will sign for.",
             );
         }
     }

src/shared/balances.js

@@ -147,20 +147,20 @@ async function fetchTokenBalances(address, blockscoutUrl, trackedTokens) {
             // null is a holding of an amount that cannot be stated, which is
             // not the same as a holding of zero, and must never render as one.
             const bal = scale === null ? null : formatTokenBalance(raw, scale);
-            // null means the explorer reported no count, which is not the
+            // null means the explorer reported no readable count, which is
-            // same as a count of zero.  This gate is not the low-holder
+            // not the same as a count of zero.  This gate is not the
-            // display filter: it has no user-facing off switch and governs
+            // low-holder display filter: it has no user-facing off switch and
-            // the whole balance list, so it stays strict and admits a token
+            // governs the whole balance list, so it stays strict and admits a
-            // only on a reported count — an unreported one is no evidence.
+            // token only on a reported count — an unreported one is no
-            // A legitimate token still reaches the list through the known
+            // evidence, and `null >= LOW_HOLDER_THRESHOLD` is false.  A
+            // legitimate token still reaches the list through the known
             // token list or by the user tracking it, and the null is carried
             // through to the views, where the two low-holder filters treat
             // an unknown count as "do not judge" rather than as zero.
             const holders = parseHoldersCount(item.token.holders_count);
             const isKnown = TOKEN_BY_ADDRESS.has(tokenAddr);
             const isTracked = trackedSet.has(tokenAddr);
-            const hasEnoughHolders =
+            const hasEnoughHolders = holders >= LOW_HOLDER_THRESHOLD;
-                holders !== null && holders >= LOW_HOLDER_THRESHOLD;
 
             // Skip spam tokens the user never asked to see
             if (!isKnown && !isTracked && !hasEnoughHolders) continue;

src/shared/constants.js

@@ -33,7 +33,6 @@ const DEBUG_MNEMONIC = DEBUG
     : null;
 
 const ETHEREUM_MAINNET_CHAIN_ID = "0x1";
-const ETHEREUM_SEPOLIA_CHAIN_ID = "0xaa36a7";
 
 const DEFAULT_RPC_URL = "https://ethereum-rpc.publicnode.com";
 
@@ -69,7 +68,6 @@ module.exports = {
     BUILD_DEBUG_MARKER,
     DEBUG_MNEMONIC,
     ETHEREUM_MAINNET_CHAIN_ID,
-    ETHEREUM_SEPOLIA_CHAIN_ID,
     DEFAULT_RPC_URL,
     DEFAULT_BLOCKSCOUT_URL,
     BIP44_ETH_PATH,

src/shared/holders.js

@@ -9,13 +9,22 @@
 
 const LOW_HOLDER_THRESHOLD = 1000;
 
-// Parse an explorer-supplied holders_count into a number, or null when the
+// Parse an explorer-supplied holders_count into a number, or null when it is
-// explorer did not report one.  Anything unparseable is unknown too: a count
+// not one.  Only a whole number of zero or more, or a string made of nothing
-// we cannot read is not a count of zero.
+// but the digits 0-9, is a count.  Anything else is null, never read in part:
+// "1,000", "0x10" and "1e3" are unknown, not 1, 0 and 1, because a count we
+// cannot read is not a low count.  A count above Number.MAX_SAFE_INTEGER is
+// null too: a number cannot hold it exactly, so it would come back rounded,
+// or as Infinity.
 function parseHoldersCount(raw) {
-    if (raw === null || raw === undefined || raw === "") return null;
+    if (typeof raw === "number") {
-    const n = parseInt(raw, 10);
+        return Number.isSafeInteger(raw) && raw >= 0 ? raw : null;
-    return Number.isFinite(n) ? n : null;
+    }
+    if (typeof raw === "string" && /^[0-9]+$/.test(raw)) {
+        const count = Number(raw);
+        return Number.isSafeInteger(count) ? count : null;
+    }
+    return null;
 }
 
 // True only for a token the explorer reported as having fewer holders than

src/shared/networks.js

@@ -76,10 +76,13 @@ function networkByChainId(chainId) {
     return null;
 }
 
-// Build a block explorer link for the given path type and value.
+// The native currency of the network with this chain id. A transaction's
-// type: "address" | "tx" | "token" | "block"
+// value and fee are labelled with the one of the chain the transaction is on,
-function explorerLink(network, type, value) {
+// which need not be the active network. `ETH` when the chain id is missing or
-    return `${network.explorerUrl}/${type}/${value}`;
+// no network here has it.
+function nativeCurrencyByChainId(chainId) {
+    const network = networkByChainId(chainId);
+    return network ? network.nativeCurrency : "ETH";
 }
 
 module.exports = {
@@ -89,5 +92,5 @@ module.exports = {
     isKnownNetworkId,
     networkById,
     networkByChainId,
-    explorerLink,
+    nativeCurrencyByChainId,
 };

src/shared/prices.js

@@ -104,27 +104,6 @@ function getAddressValue(addr) {
     return { usd, partial };
 }
 
-// The same pair for a whole wallet, and for every wallet at once. One
-// unpriced holding anywhere makes the sum a floor, so partial carries up.
-function getWalletValue(wallet) {
-    return sumValues(wallet.addresses.map(getAddressValue));
-}
-
-function getTotalValue(wallets) {
-    return sumValues(wallets.map(getWalletValue));
-}
-
-function sumValues(values) {
-    let usd = null;
-    let partial = false;
-    for (const value of values) {
-        if (value.usd === null) continue;
-        usd = (usd === null ? 0 : usd) + value.usd;
-        partial = partial || value.partial;
-    }
-    return { usd, partial };
-}
-
 // The one rendering of an address total, so no screen says it differently.
 //
 // A partial total is shown and named as partial: the figure is the ETH and
@@ -149,6 +128,4 @@ module.exports = {
     formatUsd,
     formatAddressTotal,
     getAddressValue,
-    getWalletValue,
-    getTotalValue,
 };

src/shared/state.js

@@ -122,9 +122,9 @@ function currentNetwork() {
     return networkById(state.networkId);
 }
 
-// The persisted fields as they stood at the end of this page's last
+// The persisted fields as this page held them when its last loadState()
-// loadState() or saveState(). saveState() diffs the live state against this
+// finished, or when its last successful saveState() began. saveState() diffs
-// to find only the fields THIS page actually changed.
+// the live state against this to find only the fields THIS page changed since.
 //
 // Deep-cloned, not a reference: callers mutate persisted objects and arrays
 // in place (state.wallets.push(...)), and a reference baseline would mutate
@@ -464,7 +464,10 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 // does not own goes on being whatever its last loadState() saw, same as
 // before this fix; only the persisted record is guaranteed current.
 async function saveStateOnce() {
-    const current = snapshotPersisted();
+    // A copy, so what this save compares and writes is the page's state as it
+    // stood when the save began. A change made while it waits on storage is
+    // left for the next save, which compares against this copy.
+    const current = structuredClone(snapshotPersisted());
     const result = await storageGet("autistmask");
     // The record in storage right now is about to be merged into and written
     // back, so it is validated exactly like a load validates it. Without this,
@@ -521,7 +524,11 @@ async function saveStateOnce() {
     // exactly as it stood; see the note above.
     rawState.hasWallet = rawState.wallets.length > 0;
 
-    baseline = structuredClone(snapshotPersisted());
+    // What this save compared and wrote, not the page's state now: a change
+    // made during the save must still differ from the baseline, or the save
+    // queued after it finds nothing to store
+    // (https://git.eeqj.de/sneak/AutistMask/issues/448).
+    baseline = current;
 }
 
 // showView() calls saveState() on every navigation without awaiting it, so

src/shared/symbolDisplay.js

@@ -20,6 +20,10 @@
 // (MSYRUPUSDP), so nothing the wallet ships as a real token is ever
 // truncated. The ellipsis is what tells the user the name they are looking
 // at is not the whole name — worth knowing before they send to it.
+//
+// Characters are counted as code points, not UTF-16 units, so an emoji is
+// one character and the cut never falls between the two halves of one: a
+// half on its own renders as U+FFFD.
 
 const MAX_SYMBOL_LENGTH = 12;
 
@@ -32,8 +36,9 @@ const UNKNOWN_SYMBOL = "???";
 function displaySymbol(symbol) {
     const s = symbol === null || symbol === undefined ? "" : String(symbol);
     if (s.length === 0) return UNKNOWN_SYMBOL;
-    if (s.length <= MAX_SYMBOL_LENGTH) return s;
+    const chars = Array.from(s);
-    return s.slice(0, MAX_SYMBOL_LENGTH - 1) + "…";
+    if (chars.length <= MAX_SYMBOL_LENGTH) return s;
+    return chars.slice(0, MAX_SYMBOL_LENGTH - 1).join("") + "…";
 }
 
 module.exports = {

src/shared/symbolSpoof.js

@@ -11,8 +11,8 @@
 // KNOWN_SYMBOLS maps a symbol to the set of lowercased contract addresses
 // that may bear it, or to null.  Null means the symbol belongs to the native
 // asset, which has no contract at all, so no contract may bear it and every
-// one that does is a spoof.  "ETH" is the only such entry today; the rule is
+// one that does is a spoof.  "ETH" is one such entry, and every network's
-// written so that a second one needs no change here or at any call site.
+// `nativeCurrency` in networks.js (`SepoliaETH`) is another, on every network.
 //
 // The value is a set because a ticker is not unique: seven symbols in the
 // bundled list belong to two real contracts each, and answering with one of

src/shared/tokenList.js

@@ -6,6 +6,7 @@
 // 511 tokens.
 
 const { debugFetch } = require("./log");
+const { NETWORKS } = require("./networks");
 
 const COINDESK_API = "https://data-api.coindesk.com/index/cc/v1/latest/tick";
 
@@ -3610,7 +3611,9 @@ for (const t of TOKENS) {
 // Build a map of symbol (uppercased) -> the set of contract addresses
 // (lowercased) that legitimately bear it.  Used for spoofed-symbol detection.
 // "ETH" maps to null: the native asset has no contract, so no contract may
-// bear its symbol.
+// bear its symbol. So does every network's `nativeCurrency` in networks.js
+// (`SepoliaETH`), on every network, since that is the label the wallet shows
+// its native asset under on that network.
 //
 // The value is a set and not a single address because tickers are not unique
 // and the list above proves it: seven of these 512 tokens share a symbol with
@@ -3624,6 +3627,9 @@ for (const t of TOKENS) {
 // loosen the rule, because a contract outside the set is still a spoof.
 const KNOWN_SYMBOLS = new Map();
 KNOWN_SYMBOLS.set("ETH", null);
+for (const network of Object.values(NETWORKS)) {
+    KNOWN_SYMBOLS.set(network.nativeCurrency.toUpperCase(), null);
+}
 for (const t of TOKENS) {
     const upper = t.symbol.toUpperCase();
     if (!KNOWN_SYMBOLS.has(upper)) {

src/shared/transactions.js

@@ -11,6 +11,7 @@ const { log, debugFetch } = require("./log");
 const { TOKEN_BY_ADDRESS } = require("./tokenList");
 const { parseHoldersCount, isLowHolderCount } = require("./holders");
 const { isSpoofedSymbol } = require("./symbolSpoof");
+const { nativeCurrencyByChainId } = require("./networks");
 // The uint8 test every scale in this wallet goes through. Shared, not copied:
 // a scale is either reported or it is unknown, and "unknown" must mean the
 // same thing here as it does on the screens that refuse to format one.
@@ -28,7 +29,7 @@ function normalizeAddress(addr) {
     return (addr || "").toLowerCase();
 }
 
-function parseTx(tx, addrLower) {
+function parseTx(tx, addrLower, chainId) {
     const from = tx.from?.hash || "";
     const to = tx.to?.hash || "";
     const rawWei = tx.value || "0";
@@ -36,7 +37,7 @@ function parseTx(tx, addrLower) {
     const method = tx.method || null;
 
     // For contract calls, produce a meaningful label instead of "0.0000 ETH"
-    let symbol = "ETH";
+    let symbol = nativeCurrencyByChainId(chainId);
     let value = formatTxValue(formatEther(rawWei));
     let exactValue = formatEther(rawWei);
     let rawAmount = rawWei;
@@ -90,10 +91,11 @@ function parseTx(tx, addrLower) {
         holders: null,
         isContractCall: toIsContract,
         method: method,
+        chainId: chainId,
     };
 }
 
-function parseTokenTransfer(tt, addrLower) {
+function parseTokenTransfer(tt, addrLower, chainId) {
     const from = tt.from?.hash || "";
     const to = tt.to?.hash || "";
     // The explorer's own answer, or null. Never a default: a transfer of
@@ -135,10 +137,12 @@ function parseTokenTransfer(tt, addrLower) {
         contractAddress: normalizeAddress(
             tt.token?.address_hash || tt.token?.address || "",
         ),
-        // null when the explorer reported no count: unknown, not zero.  The
+        // null when the explorer reported no readable count: unknown, not
-        // low-holder filter declines to judge a null, so a legitimate token
+        // zero.  The low-holder filter declines to judge a null, so a
-        // is not hidden because a field went missing upstream.
+        // legitimate token is not hidden because a field went missing
+        // upstream.
         holders: parseHoldersCount(tt.token?.holders_count),
+        chainId: chainId,
     };
 }
 
@@ -221,7 +225,15 @@ function mergeTransactions(txs, tokenTransfers) {
     return merged;
 }
 
-async function fetchRecentTransactions(address, blockscoutUrl, count = 25) {
+// `chainId` is the chain id of the network `blockscoutUrl` serves. Every entry
+// carries it, and a native entry is labelled with that network's
+// `nativeCurrency` from networks.js (`ETH`, `SepoliaETH`).
+async function fetchRecentTransactions(
+    address,
+    blockscoutUrl,
+    chainId,
+    count = 25,
+) {
     log.debugf("fetchRecentTransactions", address);
     const addrLower = normalizeAddress(address);
 
@@ -254,8 +266,10 @@ async function fetchRecentTransactions(address, blockscoutUrl, count = 25) {
     const ttJson = ttResp.ok ? await ttResp.json() : {};
 
     const txs = mergeTransactions(
-        (txJson.items || []).map((tx) => parseTx(tx, addrLower)),
+        (txJson.items || []).map((tx) => parseTx(tx, addrLower, chainId)),
-        (ttJson.items || []).map((tt) => parseTokenTransfer(tt, addrLower)),
+        (ttJson.items || []).map((tt) =>
+            parseTokenTransfer(tt, addrLower, chainId),
+        ),
     );
 
     const result = txs.slice(0, count);

src/shared/txValidation.js

@@ -1,4 +1,4 @@
-// Balance arithmetic for the transaction confirmation screen.
+// Balance arithmetic for the Send and transaction confirmation screens.
 //
 // Pure: no DOM, no network, no state. Everything is exact integer math on
 // 18-decimal fixed point (wei for ETH), so it can be unit tested directly
@@ -10,7 +10,7 @@
 // the token balance arrive as human decimal strings, so comparing them at a
 // common scale is exact.
 
-const { parseUnits } = require("ethers");
+const { parseUnits, formatEther } = require("ethers");
 
 const SCALE_DECIMALS = 18;
 
@@ -87,6 +87,28 @@ function toFixedPoint(value) {
     }
 }
 
+// The most ETH a send can carry: the exact balance minus the fee reserve from
+// feeReserveWei(), as a decimal string, so validateTransfer() passes it with
+// exactly that reserve left behind. `ethBalance` is the exact decimal string
+// balances.js stores, never a rounded one. Null when the balance does not
+// leave anything to send once the fee is paid, or when either input is
+// unusable.
+function maxEthAmount(ethBalance, feeWei) {
+    const balanceWei = toFixedPoint(ethBalance);
+    if (balanceWei === null) return null;
+    if (typeof feeWei !== "bigint" || feeWei < 0n) return null;
+    const amountWei = balanceWei - feeWei;
+    if (amountWei <= 0n) return null;
+    return formatEther(amountWei);
+}
+
+// The most of a token a send can carry: its balance cut down, never rounded
+// up, to the 18 places (SCALE_DECIMALS) an amount may have. A token can
+// declare more than 18 decimals, and its balance is stored with all of them.
+function maxTokenAmount(tokenBalance) {
+    return tokenBalance.replace(/(\.\d{18})\d+$/, "$1");
+}
+
 // Validate a pending transfer against the balances that must cover it.
 //
 //   isErc20      — token transfer rather than a native ETH transfer
@@ -139,13 +161,12 @@ function validateTransfer({
     const feeFp = known ? feeWei : null;
 
     if (isErc20) {
-        // A token can declare more than 18 decimals, and its balance is
+        // Only the first 18 places of the balance are read: an amount with
-        // stored with all of them. Only the first 18 places (SCALE_DECIMALS)
+        // more was refused above, so the places after them cannot decide
-        // are read: an amount with more was refused above, so the places
+        // whether the amount fits.
-        // after them cannot decide whether the amount fits.
         const tokenText =
             typeof tokenBalance === "string"
-                ? tokenBalance.replace(/(\.\d{18})\d+$/, "$1")
+                ? maxTokenAmount(tokenBalance)
                 : tokenBalance;
         const tokenFp = toFixedPoint(tokenText) ?? 0n;
         if (amountFp > tokenFp) codes.push(CODES.INSUFFICIENT_TOKEN);
@@ -174,6 +195,8 @@ module.exports = {
     SCALE_DECIMALS,
     feeReserveWei,
     feeEstimateWei,
+    maxEthAmount,
+    maxTokenAmount,
     toFixedPoint,
     validateTransfer,
 };

src/shared/uniswap.js

@@ -84,17 +84,31 @@ function present(value) {
 //
 // `amountOutMinimum` gets no such mapping: V4Router compares it directly
 // (`if (amountOut < params.amountOutMinimum) revert V4TooLittleReceived`), so
-// a zero minimum is a literal zero slippage floor and is stated as one. Nor do
+// a zero minimum is a literal zero slippage floor and is stated as one. Nor
-// the V2/V3 paths have it — universal-router's `V3SwapRouter.v3SwapExactInput`
+// does the V3 path have it — universal-router's `V3SwapRouter.v3SwapExactInput`
 // special-cases only `ActionConstants.CONTRACT_BALANCE` (1<<255), never zero —
-// so a zero `amountIn` there is a literal zero and is displayed as one.
+// so a zero V3 `amountIn` is a literal zero and is displayed as one. The V2
+// exact-in path gives zero a meaning of its own: see ALREADY_PAID.
 const OPEN_DELTA = Symbol("v4-open-delta");
 
-// The two amount lines that state a fact instead of a quantity. Same register
+// The Universal Router's V2 exact-in spells "the pair already holds the input
-// as UNNAMED_CURRENCY — a sentence in the value slot, so it cannot be misread
+// tokens" as an amount of zero: universal-router
-// as a number — and deliberately not a third phrasing of "not named": these
+// `contracts/libraries/Constants.sol` declares
-// say different things.
+// `uint256 internal constant ALREADY_PAID = 0` ("Used for identifying cases
+// when a v2 pair has already received input tokens"), and
+// `V2SwapRouter.v2SwapExactInput` makes no payment of its own when `amountIn`
+// equals it. The swap then spends whatever an earlier step sent to the pair.
+// As with OPEN_DELTA, the calldata states no quantity, and "0.0000" would say
+// that nothing is swapped.
+const ALREADY_PAID = Symbol("v2-already-paid");
+
+// The amount lines that state a fact instead of a quantity. Same register as
+// UNNAMED_CURRENCY — a sentence in the value slot, so it cannot be misread as a
+// number — and deliberately not another phrasing of "not named": these say
+// different things.
 const OPEN_DELTA_AMOUNT = "All available (V4 open delta)";
+const ALREADY_PAID_AMOUNT =
+    "Whatever an earlier step sent to the pair (V2 already paid)";
 const NO_MINIMUM = "None (no minimum guaranteed)";
 
 // Permit2 amounts are uint160; the maximum is Permit2's "unbounded".
@@ -185,6 +199,7 @@ function decodeBalanceCheck(input) {
 // Decode V2_SWAP_EXACT_IN (command 0x08) input bytes.
 // ABI: (address recipient, uint256 amountIn, uint256 amountOutMin,
 //        address[] path, bool payerIsUser)
+// A zero `amountIn` is read the way the router reads it, as ALREADY_PAID.
 function decodeV2SwapExactIn(input) {
     try {
         const d = coder.decode(
@@ -192,7 +207,7 @@ function decodeV2SwapExactIn(input) {
             input,
         );
         return {
-            amountIn: d[1],
+            amountIn: d[1] === 0n ? ALREADY_PAID : d[1],
             amountOutMin: d[2],
             tokenIn: d[3][0],
             tokenOut: d[3][d[3].length - 1],
@@ -502,7 +517,13 @@ function decode(data, toAddress, sources) {
 
                 if (cmdId === 0x0e) {
                     const b = decodeBalanceCheck(inputs[i]);
-                    if (b) setOutput(b.token, b.minBalance);
+                    // The router passes this check whenever the owner holds at
+                    // least minBalance, so a zero one guarantees nothing and
+                    // does not replace a minimum an earlier step stated. Any
+                    // other minBalance sets the output side as a swap does.
+                    if (b && !(b.minBalance === 0n && present(minOutput))) {
+                        setOutput(b.token, b.minBalance);
+                    }
                 }
 
                 if (cmdId === 0x00) {
@@ -623,14 +644,20 @@ function decode(data, toAddress, sources) {
         }
 
         if (present(inputAmount)) {
-            // Two amounts need no scale to describe and are named rather than
+            // Three amounts need no scale to describe and are named rather
-            // formatted: V4's open delta, which is not a quantity at all (see
+            // than formatted: V4's open delta and V2's already-paid zero,
-            // OPEN_DELTA), and an unbounded permit. The open-delta test comes
+            // neither of which is a quantity at all (see OPEN_DELTA and
-            // first — the sentinel is not a bigint and cannot be compared with
+            // ALREADY_PAID), and an unbounded permit. Those two tests come
-            // one.
+            // first — the sentinels are not bigints and cannot be compared
+            // with one.
             let amount;
             if (inputAmount === OPEN_DELTA) {
                 amount = { raw: OPEN_DELTA_AMOUNT, display: OPEN_DELTA_AMOUNT };
+            } else if (inputAmount === ALREADY_PAID) {
+                amount = {
+                    raw: ALREADY_PAID_AMOUNT,
+                    display: ALREADY_PAID_AMOUNT,
+                };
             } else if (inputAmount >= MAX_UINT160) {
                 amount = { raw: "Unlimited", display: "Unlimited" };
             } else if (hasV2ExactOut) {
@@ -697,10 +724,15 @@ function decode(data, toAddress, sources) {
 
         details.push({ label: "Steps", value: commandNames.join(" \u2192 ") });
 
+        // A JavaScript date reaches only to 275760-09-13 00:00:00 UTC. A
+        // later deadline, such as the uint256 maximum, makes an invalid date,
+        // and toISOString() throws on one, so that deadline is said in words.
         const deadlineDate = new Date(Number(deadline) * 1000);
         details.push({
             label: "Deadline",
-            value: deadlineDate.toISOString().replace("T", " ").slice(0, 19),
+            value: isNaN(deadlineDate.getTime())
+                ? "After 275760-09-13 00:00:00 (no deadline in practice)"
+                : deadlineDate.toISOString().replace("T", " ").slice(0, 19),
         });
 
         return {

tests/addressValue.test.js

@@ -22,8 +22,6 @@ const {
     prices,
     clearPrices,
     getAddressValue,
-    getWalletValue,
-    getTotalValue,
     formatAddressTotal,
 } = require("../src/shared/prices");
 const { state } = require("../src/shared/state");
@@ -136,17 +134,6 @@ describe("the value of an address, and whether it is the whole value", () => {
             partial: false,
         });
     });
-
-    test("one unpriced holding makes a wallet and the grand total partial", () => {
-        const wallet = { addresses: [FULLY_PRICED, UNPRICED_ONLY] };
-        expect(getWalletValue(wallet)).toEqual({ usd: 5500, partial: true });
-        expect(getTotalValue([wallet])).toEqual({ usd: 5500, partial: true });
-    });
-
-    test("a wallet of fully priced addresses stays complete", () => {
-        const wallet = { addresses: [FULLY_PRICED, EMPTY] };
-        expect(getWalletValue(wallet)).toEqual({ usd: 5500, partial: false });
-    });
 });
 
 describe("how that value is written on screen", () => {
@@ -207,6 +194,14 @@ describe("the wallet list on Home", () => {
         clearPrices();
         expect(walletListTotal(FULLY_PRICED)).toBe(" ");
     });
+
+    // A total under a cent is written "< $0.01", and the "<" is escaped
+    // here as the removal warning escapes it.
+    test("a total under a cent is escaped, as on the removal warning", () => {
+        const tiny = { ...EMPTY, balance: "0.000001" };
+        expect(walletListTotal(tiny)).toBe("Total: &lt; $0.01");
+        expect(removalWarningTotal(tiny)).toBe("Total: &lt; $0.01");
+    });
 });
 
 describe("the balance warning on the address-removal confirmation", () => {

tests/approvalAmount.test.js

@@ -31,11 +31,15 @@ const iface = new Interface(ERC20_ABI);
 const NOVEL_TOKEN = "0xE2E0000000000000000000000000000000000E2e";
 // In the bundled list, at 6 decimals.
 const USDC = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
+// In the bundled list, at 0 decimals.
+const SLP = "0xCC8Fa225D80b9c7D42F96e9570156c65D6cAAa25";
 const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
 const SPENDER = "0x1111111111111111111111111111111111111111";
 
 // 5,000 units of a 6-decimal token, the amount from the issue.
 const FIVE_THOUSAND_AT_SIX = 5000000000n;
+// 5,000 units of a 0-decimal token, which are 5,000 tokens.
+const FIVE_THOUSAND_AT_ZERO = 5000n;
 const MAX_UINT256 = (1n << 256n) - 1n;
 
 function transferData(amount) {
@@ -113,6 +117,21 @@ describe("resolveTokenDecimals", () => {
         expect(resolveTokenDecimals(NOVEL_TOKEN, state)).toBe(6);
     });
 
+    // Zero decimals is a real scale, not a missing one, so a source that
+    // answers 0 is used rather than fallen past like the unusable entry above.
+    test("uses a bundled scale of zero", () => {
+        state.trackedTokens = [{ address: SLP, symbol: "SLP", decimals: 18 }];
+        expect(resolveTokenDecimals(SLP, state)).toBe(0);
+    });
+
+    test("uses a tracked scale of zero", () => {
+        state.trackedTokens = [
+            { address: NOVEL_TOKEN, symbol: "NOVEL", decimals: 0 },
+        ];
+        state.wallets = walletsHolding(NOVEL_TOKEN, 18);
+        expect(resolveTokenDecimals(NOVEL_TOKEN, state)).toBe(0);
+    });
+
     test("refuses a scale the explorer's own entries disagree about", () => {
         const wallets = walletsHolding(NOVEL_TOKEN, 6);
         wallets[0].addresses.push({
@@ -213,6 +232,21 @@ describe("decodeCalldata amount", () => {
         );
     });
 
+    test("a bundled token with zero decimals shows the true quantity", () => {
+        expect(amountLine(transferData(FIVE_THOUSAND_AT_ZERO), SLP)).toBe(
+            "5000.0000 SLP",
+        );
+    });
+
+    test("a tracked token with zero decimals shows the true quantity", () => {
+        state.trackedTokens = [
+            { address: NOVEL_TOKEN, symbol: "NOVEL", decimals: 0 },
+        ];
+        expect(
+            amountLine(transferData(FIVE_THOUSAND_AT_ZERO), NOVEL_TOKEN),
+        ).toBe("5000.0000 NOVEL");
+    });
+
     test("the amount carried to the status screens is the same string", () => {
         const decoded = decodeCalldata(
             transferData(FIVE_THOUSAND_AT_SIX),

tests/approvalVerify.test.js

@@ -599,6 +599,24 @@ describe("verifySignedTx field comparison", () => {
                 expect(e.message).toContain("1.0 ETH");
             }
         });
+
+        // The fee is in the native currency of the network the transaction is
+        // for, whether its chain id is the hex string the background prepares
+        // or the number ethers parses from a signed transaction.
+        test.each([
+            ["0x1", "ETH"],
+            [1n, "ETH"],
+            ["0xaa36a7", "SepoliaETH"],
+            [11155111n, "SepoliaETH"],
+        ])("the refusal on chain %p names %s", (chainId, nativeCurrency) => {
+            expect(() => assertWithinCeilings({ ...OVER, chainId })).toThrow(
+                "up to 3000.0 " +
+                    nativeCurrency +
+                    ", which is more than the 1.0 " +
+                    nativeCurrency +
+                    " this wallet",
+            );
+        });
     });
 
     test("every field mismatch is a refusal, not a warning", async () => {

tests/backgroundApproval.test.js

@@ -267,9 +267,22 @@ function loadBackground(options) {
             lastError: null,
         },
         windows: {
-            getLastFocused: (cb) => cb(null),
+            getLastFocused: (cb) => cb(opts.lastFocused || null),
             create: (options2, cb) => {
-                created.push(options2);
+                // A copy, as the browser takes it at the call: the background
+                // reuses the object when it asks a second time.
+                created.push({ ...options2 });
+                // A browser that refuses any position it is given, as Chrome
+                // does for one it judges too far off screen.
+                if (opts.refusePosition && options2.left !== undefined) {
+                    global.chrome.runtime.lastError = {
+                        message:
+                            "Invalid value for bounds. Bounds must be at least 50% within visible screen space.",
+                    };
+                    cb(undefined);
+                    global.chrome.runtime.lastError = null;
+                    return;
+                }
                 // A browser that answers with no window at all. The approval
                 // then has no window it can ever be answered in.
                 cb(opts.noWindow ? undefined : { id: created.length });
@@ -2235,6 +2248,27 @@ describe("a site connection decided as the popup closes", () => {
         });
     });
 
+    // The prompt is decided before the toolbar popup raised for it has
+    // loaded; that popup is torn down and openPopup() rejects only after.
+    test("a toolbar prompt already decided opens no window when openPopup() rejects", async () => {
+        const bg = loadBackground({ actionPopup: true });
+        const opening = deferred();
+        bg.openPopup.mockImplementation(() => opening.promise);
+        const pending = bg.requestSite();
+        await settle();
+
+        const port = bg.connectApproval(pending.id());
+        port.decide(true, false);
+        port.disconnect();
+        await settle();
+        expect(pending.result()).toEqual({ result: [signer.address] });
+
+        opening.reject(new Error("the toolbar popup closed before it loaded"));
+        await settle();
+
+        expect(bg.created).toHaveLength(0);
+    });
+
     // The port carries a decision now, so it carries the sender check the
     // one-off message used to carry. A content script that guessed an
     // approval id must not be able to connect the site it is running on.
@@ -2695,3 +2729,77 @@ describe("removing a site in Settings disconnects it", () => {
         expect(await siteAccounts(bg)).toEqual({ result: [signer.address] });
     });
 });
+
+// An approval window still open is often the last focused window, and headless
+// Chrome reports one as 1280x720. Centred on that, the next approval window
+// lands where the browser refuses to create it, and its request failed with no
+// window at all (https://git.eeqj.de/sneak/AutistMask/issues/290).
+describe("where an approval window opens", () => {
+    test("centred on the browser window the user was last in", async () => {
+        const bg = loadBackground({
+            lastFocused: {
+                type: "normal",
+                left: 0,
+                top: 0,
+                width: 1280,
+                height: 720,
+            },
+        });
+
+        bg.requestSign();
+        await settle();
+
+        expect(bg.created).toHaveLength(1);
+        expect(bg.created[0]).toMatchObject({ left: 460, top: 60 });
+    });
+
+    test("not centred on an approval window the user was last in", async () => {
+        const bg = loadBackground({
+            lastFocused: {
+                type: "popup",
+                left: 440,
+                top: 0,
+                width: 1280,
+                height: 720,
+            },
+        });
+
+        bg.requestSign();
+        await settle();
+
+        // Centred, it would be at left 900, the position the browser refused.
+        expect(bg.created).toHaveLength(1);
+        expect(bg.created[0].left).toBeUndefined();
+        expect(bg.created[0].top).toBeUndefined();
+    });
+
+    test("placed by the browser when it refuses the centred position", async () => {
+        const bg = loadBackground({
+            refusePosition: true,
+            lastFocused: {
+                type: "normal",
+                left: 1500,
+                top: 900,
+                width: 400,
+                height: 300,
+            },
+        });
+
+        const sign = bg.requestSign();
+        await settle();
+
+        expect(bg.created).toHaveLength(2);
+        expect(bg.created[0]).toMatchObject({ left: 1520, top: 750 });
+        expect(bg.created[1].left).toBeUndefined();
+        expect(bg.created[1].top).toBeUndefined();
+
+        // The request waits on the second window rather than failing:
+        // closing that window is refusing the prompt.
+        expect(sign.result()).toBeNull();
+        bg.closeWindow(2);
+        await settle();
+        expect(sign.result()).toEqual({
+            error: { code: 4001, message: "User rejected the request." },
+        });
+    });
+});

tests/balanceLineEscaping.test.js

@@ -66,4 +66,11 @@ describe("balanceLine", () => {
         expect(html).toContain("<span>1.5000</span>");
         expect(html).toContain('data-token="0xabc"');
     });
+
+    // formatUsd() writes a value under a cent as "< $0.01".
+    test("escapes the USD value along with the symbol", () => {
+        const html = balanceLine("USDC", 0.001, 1, null);
+        expect(html).toContain("&lt; $0.01");
+        expect(html).not.toContain("< $0.01");
+    });
 });

tests/deleteWalletLostPassword.test.js

@@ -46,6 +46,9 @@ const A1 = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
 const B0 = "0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599";
 const C0 = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
 
+// U+200B, built from its code point so that it can be seen in this file.
+const ZERO_WIDTH_SPACE = String.fromCodePoint(0x200b);
+
 // ------------------------------------------------------------ DOM stub
 
 function makeElement(id) {
@@ -342,6 +345,72 @@ describe("the typed confirmation", () => {
             "secret-three",
         ]);
     });
+
+    // A name of only spaces compares as nothing, and so does an empty
+    // field. Typing nothing must still delete nothing.
+    test.each(["", "   "])(
+        "typing %j deletes nothing when the name is only spaces",
+        async (typedValue) => {
+            const { deleteWallet, state, storage } = load();
+            state.wallets[1].name = "   ";
+            await openLostPassword(deleteWallet, 1);
+
+            node("delete-wallet-lost-name-input").value = typedValue;
+            await click("btn-delete-wallet-lost-confirm");
+
+            expect(node("delete-wallet-lost-flash").style.visibility).toBe(
+                "visible",
+            );
+            expect(state.wallets).toHaveLength(3);
+            expect(await persistedWallets(storage)).toHaveLength(3);
+        },
+    );
+
+    // A name that shows nothing would leave nothing on screen to type
+    // back, so the screen names the wallet by its position instead, and
+    // that is what the user types.
+    test.each([
+        ["spaces", "   "],
+        ["a zero-width space", ZERO_WIDTH_SPACE],
+    ])(
+        "a name of only %s is shown and typed back as Wallet 2",
+        async (_label, storedName) => {
+            const { deleteWallet, state, storage } = load();
+            state.wallets[1].name = storedName;
+            await openLostPassword(deleteWallet, 1);
+
+            expect(node("delete-wallet-lost-name").textContent).toBe(
+                "Wallet 2",
+            );
+            node("delete-wallet-lost-name-input").value = "Wallet 2";
+            await click("btn-delete-wallet-lost-confirm");
+
+            const persisted = await persistedWallets(storage);
+            expect(persisted.map((w) => w.encryptedSecret)).toEqual([
+                "secret-one",
+                "secret-three",
+            ]);
+        },
+    );
+
+    // A zero-width space paints nothing, so "My", a zero-width space and
+    // "Wallet" reads as "MyWallet", and that is all the user can type. HTML
+    // does not collapse it the way it collapses spaces, so it has to be
+    // removed explicitly.
+    test("a zero-width space inside the name is not part of it", async () => {
+        const { deleteWallet, state, storage } = load();
+        state.wallets[1].name = "My" + ZERO_WIDTH_SPACE + "Wallet";
+        await openLostPassword(deleteWallet, 1);
+
+        node("delete-wallet-lost-name-input").value = "MyWallet";
+        await click("btn-delete-wallet-lost-confirm");
+
+        const persisted = await persistedWallets(storage);
+        expect(persisted.map((w) => w.encryptedSecret)).toEqual([
+            "secret-one",
+            "secret-three",
+        ]);
+    });
 });
 
 describe("deleting without the password", () => {

tests/e2e/firefox/run.js

@@ -46,6 +46,7 @@
 
 const fs = require("fs");
 const path = require("path");
+const { isDeepStrictEqual } = require("util");
 
 const {
     Transaction,
@@ -62,6 +63,10 @@ const {
 const { ConsoleErrors, EXTENSION_ORIGIN, start, sleep } = require("./driver");
 const { startDappServer } = require("./dapp");
 const { STUB_COUNTERPARTY } = require("../network");
+const {
+    STATE_SCHEMA_VERSION,
+    stateProblem,
+} = require("../../../src/shared/stateSchema");
 
 const REPO_ROOT = path.resolve(__dirname, "..", "..", "..");
 const POPUP_URL = EXTENSION_ORIGIN + "/src/popup/index.html";
@@ -108,6 +113,137 @@ step("popup loads and reaches the welcome view", async (env) => {
     assert(title === "AutistMask", "unexpected popup title: " + title);
 });
 
+// The same check as the Chrome suite's (#418), so both browsers are held to
+// the same font.
+step("the popup is drawn in the monospace font it declares", async (env) => {
+    const font = await env.driver.execute(
+        "return getComputedStyle(document.body).fontFamily;",
+    );
+    // --font-mono in src/popup/styles/main.css, as the browser writes it out.
+    assert(
+        font ===
+            'ui-monospace, SFMono-Regular, "SF Mono", Menlo, Consolas, "Liberation Mono", monospace',
+        "the popup is drawn in " + font + ", not in --font-mono",
+    );
+});
+
+// The recovery screen (#361): the Chrome suite's four cases, run before any
+// wallet exists for the same reason. With no wallet nothing saves on a timer,
+// so no save can write a good record over the unreadable one. The last of them
+// erases it, which leaves the popup on Welcome for wallet creation.
+
+// A profile a newer build wrote: a wallet with its encrypted secret, under a
+// schema version this build refuses to read.
+const UNREADABLE_RECORD = {
+    schemaVersion: STATE_SCHEMA_VERSION + 1,
+    wallets: [
+        {
+            type: "hd",
+            name: "Main",
+            xpub: "xpub-written-by-a-newer-build",
+            encryptedSecret: "ciphertext-written-by-a-newer-build",
+            nextIndex: 1,
+            addresses: [{ address: STUB_COUNTERPARTY }],
+        },
+    ],
+};
+
+// The whole stored record, read on the popup page.
+function storedRecord(d) {
+    return d.executeAsync(
+        `const done = arguments[arguments.length - 1];
+         browser.storage.local.get("autistmask").then((r) => done(r.autistmask));`,
+    );
+}
+
+step(
+    "an unreadable stored record opens the popup on the recovery screen",
+    async (env) => {
+        const d = env.driver;
+        // The popup the first step opened saves once, as it shows Welcome.
+        // Stored before that save lands, the record would be written over.
+        const deadline = Date.now() + 15000;
+        for (;;) {
+            const stored = await storedRecord(d);
+            if (stored && stored.currentView === "welcome") break;
+            assert(
+                Date.now() < deadline,
+                "the Welcome screen's save never landed: " +
+                    JSON.stringify(stored),
+            );
+            await sleep(100);
+        }
+        await d.executeAsync(
+            `const done = arguments[arguments.length - 1];
+             browser.storage.local.set({ autistmask: arguments[0] }).then(() => done());`,
+            [UNREADABLE_RECORD],
+        );
+
+        await d.navigate(POPUP_URL);
+        await d.waitVisible("#view-state-recovery");
+        const problem = await d.text("#state-recovery-problem");
+        assert(
+            problem === stateProblem(UNREADABLE_RECORD),
+            "the recovery screen names the problem as " +
+                JSON.stringify(problem),
+        );
+    },
+);
+
+step("Export Saved Data shows the stored record verbatim", async (env) => {
+    const d = env.driver;
+    await d.click("#btn-state-recovery-export");
+    await d.waitVisible("#state-recovery-blob");
+    const exported = await d.value("#state-recovery-blob");
+    assert(exported !== "", "Export Saved Data left the text box empty");
+    assert(
+        isDeepStrictEqual(JSON.parse(exported), UNREADABLE_RECORD),
+        "the text box does not hold the stored record: " + exported,
+    );
+});
+
+step("a near-miss confirmation phrase erases nothing", async (env) => {
+    const d = env.driver;
+    await d.fill("#state-recovery-reset-input", "ERASE MY WALLETS");
+    await d.click("#btn-state-recovery-reset");
+    await d.waitFor(
+        "the refusal on the error line",
+        `return document.getElementById("state-recovery-flash").textContent ===
+             "Type ERASE MY WALLET to confirm. Nothing was erased.";`,
+    );
+    const stored = await storedRecord(d);
+    assert(
+        isDeepStrictEqual(stored, UNREADABLE_RECORD),
+        "the stored record changed: " + JSON.stringify(stored),
+    );
+});
+
+step(
+    "the exact confirmation phrase erases the record and reloads into Welcome",
+    async (env) => {
+        const d = env.driver;
+        try {
+            await d.fill("#state-recovery-reset-input", "ERASE MY WALLET");
+            await d.click("#btn-state-recovery-reset");
+            // Welcome is the proof of the erase: the record still stored
+            // would put the recovery screen up again, and its wallet would
+            // open Home.
+            await d.waitVisible("#view-welcome");
+        } finally {
+            // Whatever failed in these four steps, wallet creation starts
+            // from Welcome. The record left stored would fail every step
+            // after this.
+            if (!(await d.isVisible("#view-welcome"))) {
+                await d.executeAsync(
+                    `const done = arguments[arguments.length - 1];
+                     browser.storage.local.remove("autistmask").then(() => done());`,
+                );
+                await d.navigate(POPUP_URL);
+            }
+        }
+    },
+);
+
 step("wallet creation through the UI reaches the main view", async (env) => {
     const d = env.driver;
     await d.click("#btn-welcome-add");

tests/e2e/network.js

@@ -256,14 +256,15 @@ const SELECTOR_DECIMALS = "0x313ce567";
 // Blockscout, which is exactly the disagreement the wallet must refuse to
 // sign over. It is read at request time, so a test flips it on the options
 // object the route was registered with — after the confirmation screen has
-// been built — without re-registering anything.
+// been built — without re-registering anything. Only null or undefined means
+// no override: 0 is a token with no decimal places, and is answered as one.
 function ethCallResult(req, opts) {
     const call = Array.isArray(req.params) ? req.params[0] : null;
     if (!call || typeof call !== "object") return ZERO_WORD;
     const data = String(call.data || call.input || "").toLowerCase();
     const to = String(call.to || "").toLowerCase();
     if (data.startsWith(SELECTOR_DECIMALS) && to === STUB_TOKEN.address) {
-        return word(opts.tokenDecimalsOverride || STUB_TOKEN.decimals);
+        return word(opts.tokenDecimalsOverride ?? STUB_TOKEN.decimals);
     }
     return ZERO_WORD;
 }
@@ -597,9 +598,10 @@ function traceEnabled(raw) {
  *   eth_estimateGas until this is cleared again.
  * @param {string[]} [opts.broadcastTransactions]  every raw signed
  *   transaction handed to eth_sendRawTransaction, appended in order.
- * @param {string} [opts.tokenDecimalsOverride]  what decimals() answers for
+ * @param {number|string|null} [opts.tokenDecimalsOverride]  the scale
- *   the stub token, in place of the value Blockscout reports for it. This is
+ *   decimals() answers for the stub token, in place of the value Blockscout
- *   the token that lies about its scale; read at request time.
+ *   reports for it; null for none, while 0 is a scale like any other. This
+ *   is the token that lies about its scale; read at request time.
  * @param {string} [opts.tokenSymbolOverride]  what the explorer reports as
  *   the stub token's symbol, in place of "E2E". This is the token whose
  *   symbol is markup; read at request time.

tests/holders.test.js

@@ -57,6 +57,39 @@ describe("parseHoldersCount", () => {
         expect(parseHoldersCount("many")).toBeNull();
         expect(parseHoldersCount(NaN)).toBeNull();
     });
+
+    // Each of these starts with a digit, so reading only the leading digits
+    // would turn it into a small reported count, and a small count is
+    // exactly what hides a token as spam (issue #251).
+    test.each(["1,000", "0x10", "1e3", "12 holders"])(
+        "%p is not read in part: it is unknown",
+        (raw) => {
+            expect(parseHoldersCount(raw)).toBeNull();
+        },
+    );
+
+    test("a negative count is unknown", () => {
+        expect(parseHoldersCount("-5")).toBeNull();
+        expect(parseHoldersCount(-5)).toBeNull();
+    });
+
+    // A number holds a whole number exactly only up to 2^53 - 1.  Past that a
+    // string of digits would come back rounded, and a long enough one as
+    // Infinity, which would pass every holder-count floor.
+    test("a count too large for a number to hold exactly is unknown", () => {
+        expect(parseHoldersCount("9007199254740993")).toBeNull();
+        expect(parseHoldersCount("9".repeat(400))).toBeNull();
+        expect(parseHoldersCount(2 ** 53)).toBeNull();
+    });
+
+    test("the largest count a number holds exactly still parses", () => {
+        expect(parseHoldersCount("9007199254740991")).toBe(
+            Number.MAX_SAFE_INTEGER,
+        );
+        expect(parseHoldersCount(Number.MAX_SAFE_INTEGER)).toBe(
+            Number.MAX_SAFE_INTEGER,
+        );
+    });
 });
 
 describe("isLowHolderCount", () => {

tests/htmlEscape.test.js

@@ -91,6 +91,17 @@ describe("displaySymbol", () => {
         expect(displaySymbol(exact)).toBe(exact);
     });
 
+    // An emoji outside the Basic Multilingual Plane is two UTF-16 units.
+    // Cutting between them leaves half of one, which renders as U+FFFD.
+    test("counts an emoji as one character and never cuts one in half", () => {
+        expect(displaySymbol("🚀".repeat(MAX_SYMBOL_LENGTH))).toBe(
+            "🚀".repeat(MAX_SYMBOL_LENGTH),
+        );
+        expect(displaySymbol("🚀".repeat(20))).toBe(
+            "🚀".repeat(MAX_SYMBOL_LENGTH - 1) + "…",
+        );
+    });
+
     test("substitutes a placeholder for an absent symbol", () => {
         expect(displaySymbol("")).toBe(UNKNOWN_SYMBOL);
         expect(displaySymbol(null)).toBe(UNKNOWN_SYMBOL);

tests/nativeCurrency.test.js

@@ -0,0 +1,461 @@
+// The native token's label on the screens that show a native amount.
+//
+// src/shared/networks.js gives each network a nativeCurrency, `ETH` on mainnet
+// and `SepoliaETH` on Sepolia, and nothing read it: every screen wrote a
+// hardcoded "ETH", so on Sepolia the balance, the value and the fee all read
+// ETH (https://git.eeqj.de/sneak/AutistMask/issues/372). Each line is asserted
+// on both networks, through the real Send, confirmation and approval screens,
+// with only the node and the DOM stubbed. So is that a token cannot pass for
+// the native token by reporting its label, and that a transaction's figures
+// carry its own network's label when another network is active.
+
+"use strict";
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        async lookupAddress() {
+            return null;
+        }
+        // 10 gwei expected, 20 gwei reserved per gas.
+        async getFeeData() {
+            return { maxFeePerGas: 20000000000n, gasPrice: 10000000000n };
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getCode() {
+            return "0x";
+        }
+        async getTransactionCount() {
+            return 1;
+        }
+        async getTransactionReceipt() {
+            return { blockNumber: 21000000 };
+        }
+    }
+    return {
+        ...actual,
+        JsonRpcProvider: StubProvider,
+        Network: { from: () => ({}) },
+    };
+});
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    debugFetch: jest.fn(async () => ({
+        ok: true,
+        status: 200,
+        json: async () => ({ items: [] }),
+    })),
+    urlOrigin: () => "",
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// Signing a send succeeds without a key, and sending answers with a hash.
+jest.mock("../src/shared/vault", () => ({
+    ...jest.requireActual("../src/shared/vault"),
+    decryptWithPassword: async () => "secret",
+}));
+jest.mock("../src/shared/wallet", () => ({
+    ...jest.requireActual("../src/shared/wallet"),
+    getSignerForAddress: () => ({
+        connect: () => ({
+            populateTransaction: async (request) => request,
+            sendTransaction: async () => ({ hash: "0x" + "3".repeat(64) }),
+        }),
+    }),
+}));
+
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+// The approval the background hands the approval screen. Set per test.
+let approvalDetails = null;
+
+const { makeStorageStub } = require("./support/storageStub");
+global.chrome = {
+    storage: makeStorageStub(),
+    runtime: {
+        connect: () => ({
+            postMessage() {},
+            disconnect() {},
+            onDisconnect: { addListener() {} },
+        }),
+        sendMessage(message, callback) {
+            callback(
+                message.type === "AUTISTMASK_GET_APPROVAL"
+                    ? approvalDetails
+                    : undefined,
+            );
+        },
+    },
+};
+
+// A stub DOM: every id resolves to a recording element.
+const elements = new Map();
+
+function makeEl(id) {
+    const handlers = new Map();
+    return {
+        id,
+        textContent: "",
+        innerHTML: "",
+        value: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add() {},
+            remove() {},
+            toggle() {},
+            contains: () => false,
+        },
+        handlers,
+        children: [],
+        addEventListener(name, fn) {
+            handlers.set(name, fn);
+        },
+        appendChild(child) {
+            this.children.push(child);
+            return child;
+        },
+        querySelectorAll: () => [],
+        querySelector: () => null,
+        remove() {},
+        focus() {},
+        // Views reach for .parentElement to hide whole sections.
+        get parentElement() {
+            return global.document.getElementById(id + "-parent");
+        },
+    };
+}
+
+global.document = {
+    getElementById(id) {
+        if (!elements.has(id)) elements.set(id, makeEl(id));
+        return elements.get(id);
+    },
+    createElement: (tag) => makeEl(tag),
+    body: { prepend() {}, appendChild() {} },
+    addEventListener() {},
+};
+global.navigator = { clipboard: { writeText() {} } };
+
+const { state } = require("../src/shared/state");
+const { NETWORKS } = require("../src/shared/networks");
+const { clearPrices } = require("../src/shared/prices");
+const send = require("../src/popup/views/send");
+const confirmTx = require("../src/popup/views/confirmTx");
+const approval = require("../src/popup/views/approval");
+const transactionDetail = require("../src/popup/views/transactionDetail");
+const txStatus = require("../src/popup/views/txStatus");
+const { balanceLinesForAddress } = require("../src/popup/views/helpers");
+const { filterTransactions } = require("../src/shared/transactions");
+const { debugFetch } = require("../src/shared/log");
+
+const HOLDER = "0x" + "a".repeat(40);
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+// A token contract that is not in the bundled token list.
+const TOKEN_CONTRACT = "0xd05339f9ea5ab9d9f03b9d57f671d2abd1f55c82";
+
+function text(id) {
+    return global.document.getElementById(id).textContent;
+}
+
+// Press Review on the Send screen for a native send of `amount`, and show the
+// confirmation screen it leads to with its fee estimate settled.
+async function confirmSend(amount) {
+    let txInfo = null;
+    send.init({ showConfirmTx: (info) => (txInfo = info) });
+    state.selectedToken = "ETH";
+    global.document.getElementById("send-to").value = RECIPIENT;
+    global.document.getElementById("send-amount").value = amount;
+    await global.document
+        .getElementById("btn-send-review")
+        .handlers.get("click")();
+    confirmTx.show(txInfo);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+// The approval screen for a dApp transaction sending 0.01 of the native token
+// with 21000 gas at up to 20 gwei, on the network with `chainId`.
+async function approveTx(chainId) {
+    approvalDetails = {
+        type: "tx",
+        origin: "https://dapp.example",
+        approvedFrom: HOLDER,
+        approvedTx: {
+            to: RECIPIENT,
+            value: "10000000000000000",
+            data: "0x",
+            chainId,
+            gasLimit: "21000",
+            maxFeePerGas: "20000000000",
+            nonce: 0,
+        },
+    };
+    await approval.show("1");
+}
+
+describe.each([
+    ["mainnet", "ETH"],
+    ["sepolia", "SepoliaETH"],
+])("on %s the native token reads %s", (networkId, symbol) => {
+    beforeEach(() => {
+        elements.clear();
+        clearPrices();
+        state.networkId = networkId;
+        state.wallets = [
+            {
+                name: "Wallet 1",
+                addresses: [{ address: HOLDER, balance: "1.5" }],
+            },
+        ];
+        state.selectedWallet = 0;
+        state.selectedAddress = 0;
+        state.trackedTokens = [];
+        state.fraudContracts = [];
+        state.currentView = null;
+    });
+
+    test("the balance", async () => {
+        const addr = state.wallets[0].addresses[0];
+        expect(balanceLinesForAddress(addr, [], false)).toContain(
+            `<span>${symbol}</span><span>1.5000</span>`,
+        );
+        state.selectedToken = "ETH";
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 1.5000 " + symbol);
+        await confirmSend("0.1");
+        expect(text("confirm-balance")).toBe("1.5000 " + symbol);
+    });
+
+    test("the value", async () => {
+        await confirmSend("0.1");
+        expect(text("confirm-type")).toBe("Native " + symbol + " transfer");
+        expect(text("confirm-amount")).toBe("0.1 " + symbol);
+        await approveTx(NETWORKS[networkId].chainId);
+        expect(text("approve-tx-value")).toBe("0.0100 " + symbol);
+    });
+
+    test("the fee", async () => {
+        await confirmSend("0.1");
+        // 21000 gas at 10 gwei expected, at 20 gwei reserved.
+        expect(text("confirm-fee-amount")).toBe("~0.0002 " + symbol);
+        expect(text("confirm-fee-reserve")).toBe(
+            "up to 0.0004 " + symbol + " reserved",
+        );
+        expect(text("confirm-gas-error")).toContain(
+            "You do not have enough " + symbol + " to pay the network fee",
+        );
+        await approveTx(NETWORKS[networkId].chainId);
+        expect(text("approve-tx-fee")).toBe("0.0004 " + symbol);
+    });
+
+    test("the contract-recipient warning", async () => {
+        await confirmSend("0.1");
+        expect(text("confirm-contract-warning")).toContain(
+            "Sending " + symbol + " or tokens directly to a contract",
+        );
+    });
+
+    // A token reports whatever symbol it likes. One reporting the label the
+    // wallet shows its native token under, on this network or any other, is
+    // a fake, exactly as one reporting `ETH` always was.
+    test.each(["ETH", symbol])(
+        "a token claiming %s is dropped from the history and the Send selector",
+        (claim) => {
+            const result = filterTransactions(
+                [
+                    {
+                        hash: "0x" + "1".repeat(64),
+                        symbol: claim,
+                        contractAddress: TOKEN_CONTRACT,
+                        holders: 900000,
+                        valueGwei: null,
+                        isContractCall: false,
+                    },
+                ],
+                { hideSpoofedSymbols: true },
+            );
+            expect(result.transactions).toEqual([]);
+            expect(result.newFraudContracts).toEqual([TOKEN_CONTRACT]);
+
+            send.renderSendTokenSelect({
+                address: HOLDER,
+                tokenBalances: [
+                    {
+                        address: TOKEN_CONTRACT,
+                        symbol: claim,
+                        decimals: 18,
+                        balance: "5",
+                        holders: 900000,
+                    },
+                ],
+            });
+            expect(
+                global.document.getElementById("send-token").children,
+            ).toEqual([]);
+        },
+    );
+
+    // The detail screen tells the two apart by the token contract, which only
+    // a token transfer has, so a token reporting the native label still reads
+    // as a token transfer.
+    test("the transaction detail screen's type line", () => {
+        const entry = {
+            hash: "0x" + "2".repeat(64),
+            from: RECIPIENT,
+            to: HOLDER,
+            value: "1.0000",
+            exactValue: "1.0",
+            symbol,
+            timestamp: 1790000000,
+            isError: false,
+            direction: "received",
+            directionLabel: "Received",
+            chainId: NETWORKS[networkId].chainId,
+        };
+        transactionDetail.show({ ...entry, contractAddress: null });
+        expect(text("tx-detail-type")).toBe("Native " + symbol + " Transfer");
+        transactionDetail.show({ ...entry, contractAddress: TOKEN_CONTRACT });
+        expect(text("tx-detail-type")).toBe("ERC-20 Token Transfer");
+    });
+
+    test("the insufficient-balance error", async () => {
+        await confirmSend("2");
+        expect(
+            global.document.getElementById("confirm-errors").innerHTML,
+        ).toContain(
+            "You have 1.5000 " +
+                symbol +
+                " but are trying to send 2 " +
+                symbol +
+                ".",
+        );
+    });
+});
+
+// A transaction's value and fee are in the native currency of the network the
+// transaction is on, which need not be the active one. A site can switch the
+// active network after its transaction is prepared and back before it is
+// signed, and a popup opened after a switch shows a sent or listed transaction
+// again. The wallet's balances follow the active network; these do not.
+describe.each([
+    ["mainnet", "sepolia", "ETH"],
+    ["sepolia", "mainnet", "SepoliaETH"],
+])(
+    "a %s transaction shown with %s active reads %s",
+    (txNetworkId, activeNetworkId, symbol) => {
+        const chainId = NETWORKS[txNetworkId].chainId;
+        const hash = "0x" + "3".repeat(64);
+
+        beforeEach(() => {
+            elements.clear();
+            clearPrices();
+            state.networkId = activeNetworkId;
+            state.wallets = [
+                {
+                    name: "Wallet 1",
+                    addresses: [{ address: HOLDER, balance: "1.5" }],
+                },
+            ];
+            state.selectedWallet = 0;
+            state.selectedAddress = 0;
+            state.trackedTokens = [];
+            state.fraudContracts = [];
+            state.currentView = null;
+            txStatus.init({ doRefreshAndRender() {} });
+        });
+
+        afterEach(() => {
+            txStatus.endWait();
+        });
+
+        test("the approval screen's value and fee", async () => {
+            await approveTx(chainId);
+            expect(text("approve-tx-network")).toBe(NETWORKS[txNetworkId].name);
+            expect(text("approve-tx-value")).toBe("0.0100 " + symbol);
+            expect(text("approve-tx-fee")).toBe("0.0004 " + symbol);
+        });
+
+        test("the wait, success and error screens", async () => {
+            const txInfo = {
+                from: HOLDER,
+                to: RECIPIENT,
+                amount: "0.0100",
+                token: "ETH",
+                tokenSymbol: null,
+                chainId,
+            };
+            txStatus.showWait(txInfo, hash);
+            expect(text("wait-tx-summary")).toBe("0.0100 " + symbol);
+            txStatus.showError(txInfo, hash, "Failed.");
+            expect(text("error-tx-summary")).toBe("0.0100 " + symbol);
+            // A later popup resumes the wait, and the receipt is there.
+            state.viewData = {
+                pendingWait: { txInfo, hash, broadcastTime: Date.now() },
+            };
+            txStatus.restoreWait();
+            for (let i = 0; i < 10; i++) {
+                await new Promise((r) => setTimeout(r, 0));
+            }
+            expect(text("success-tx-summary")).toBe("0.0100 " + symbol);
+        });
+
+        // Sent from the Send screen on the transaction's network, then
+        // resumed by a popup that opens after the active network changed.
+        test("the wait screen after a send", async () => {
+            state.networkId = txNetworkId;
+            await confirmSend("0.1");
+            confirmTx.init({});
+            global.document.getElementById("confirm-tx-password").value = "pw";
+            await global.document
+                .getElementById("btn-confirm-send")
+                .handlers.get("click")();
+            expect(text("wait-tx-summary")).toBe("0.1 " + symbol);
+            state.networkId = activeNetworkId;
+            txStatus.restoreWait();
+            expect(text("wait-tx-summary")).toBe("0.1 " + symbol);
+        });
+
+        test("the transaction detail screen's type line and fee", async () => {
+            debugFetch.mockImplementationOnce(async () => ({
+                ok: true,
+                status: 200,
+                json: async () => ({ fee: { value: "21000000000000" } }),
+            }));
+            transactionDetail.show({
+                hash,
+                from: RECIPIENT,
+                to: HOLDER,
+                value: "1.0000",
+                exactValue: "1.0",
+                symbol,
+                timestamp: 1790000000,
+                isError: false,
+                direction: "received",
+                directionLabel: "Received",
+                contractAddress: null,
+                chainId,
+            });
+            expect(text("tx-detail-type")).toBe(
+                "Native " + symbol + " Transfer",
+            );
+            for (let i = 0; i < 10; i++) {
+                await new Promise((r) => setTimeout(r, 0));
+            }
+            expect(
+                global.document.getElementById("tx-detail-fee").innerHTML,
+            ).toContain("0.000021 " + symbol);
+        });
+    },
+);

tests/persistedFieldContract.test.js

@@ -722,6 +722,28 @@ describe("the base profile the sweep corrupts", () => {
     }
 });
 
+// Home, AddressDetail and AddressToken load their transactions inside a catch
+// that only logs, so a boot that fails there still renders the view and passes
+// the tests above while none of that code runs.
+describe("the base profile loads transactions", () => {
+    for (const view of ["main", "address", "address-token"]) {
+        test(`on ${view} without logging a failure`, async () => {
+            const consoleError = jest.spyOn(console, "error");
+            try {
+                await bootPopup(restoringOnto(view));
+                const failures = consoleError.mock.calls
+                    .map((args) => args.join(" "))
+                    .filter((line) =>
+                        /loadHomeTxs failed|loadTransactions failed/.test(line),
+                    );
+                expect(failures).toEqual([]);
+            } finally {
+                consoleError.mockRestore();
+            }
+        });
+    }
+});
+
 // A field the ROUTER itself reads — the two it gates on and the two
 // hasValidAddress() indexes with. A hostile value in one of these legitimately
 // changes which view renders, so each gets its own boot per view and is held

tests/sendMax.test.js

@@ -0,0 +1,530 @@
+// The Send screen's "Max" control
+// (https://git.eeqj.de/sneak/AutistMask/issues/198).
+//
+// For ETH it fills in the exact balance minus the fee reserve the
+// confirmation screen's balance check gates on, never the four-decimal balance
+// the Send screen shows; the confirmation screen re-derives that amount from
+// its own estimate, and signs with that estimate's fee fields. For a token it
+// fills in the whole balance, and the check that ETH covers the fee still
+// applies.
+//
+// Driven through the real refreshBalances(), Send screen and confirmation
+// screen, Sign & Send included, with only the node, the explorer and the DOM
+// stubbed.
+
+"use strict";
+
+// What the stub node answers, and the signed transactions it was handed.
+const mockNode = {
+    balanceWei: 0n,
+    feeData: null,
+    broadcast: [],
+};
+
+// The token rows the stub explorer reports for the address.
+const mockExplorer = { items: [] };
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        async getBalance() {
+            return mockNode.balanceWei;
+        }
+        async lookupAddress() {
+            return null;
+        }
+        async getFeeData() {
+            return mockNode.feeData;
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getCode() {
+            return "0x";
+        }
+        async getTransactionCount() {
+            return 1;
+        }
+        async getNetwork() {
+            return { chainId: 1n };
+        }
+        async broadcastTransaction(signed) {
+            mockNode.broadcast.push(signed);
+            return { hash: "0x" + "ab".repeat(32) };
+        }
+    }
+    return {
+        ...actual,
+        JsonRpcProvider: StubProvider,
+        Network: { from: () => ({}) },
+    };
+});
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    // The explorer's token list, which refreshBalances() also fetches.
+    debugFetch: jest.fn(async () => ({
+        ok: true,
+        status: 200,
+        json: async () => mockExplorer.items,
+    })),
+    urlOrigin: () => "",
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The wait screen polls for a receipt; these tests stop at the broadcast.
+jest.mock("../src/popup/views/txStatus", () => ({
+    showWait: jest.fn(),
+    showError: jest.fn(),
+}));
+
+// The confirmation screen's Etherscan label lookup is the only fetch() these
+// screens make; it fails, as it does offline.
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+const { makeStorageStub } = require("./support/storageStub");
+global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
+
+// A stub DOM: every id resolves to a recording element.
+const elements = new Map();
+
+function makeEl(id) {
+    const handlers = new Map();
+    return {
+        id,
+        textContent: "",
+        innerHTML: "",
+        value: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add() {},
+            remove() {},
+            toggle() {},
+            contains: () => false,
+        },
+        handlers,
+        children: [],
+        addEventListener(name, fn) {
+            handlers.set(name, fn);
+        },
+        appendChild(child) {
+            this.children.push(child);
+            return child;
+        },
+        querySelectorAll: () => [],
+        querySelector: () => null,
+        remove() {},
+        focus() {},
+    };
+}
+
+global.document = {
+    getElementById(id) {
+        if (!elements.has(id)) elements.set(id, makeEl(id));
+        return elements.get(id);
+    },
+    createElement: (tag) => makeEl(tag),
+    body: { prepend() {}, appendChild() {} },
+    addEventListener() {},
+};
+global.navigator = { clipboard: { writeText() {} } };
+
+const { Transaction, Wallet, formatEther } = require("ethers");
+const { refreshBalances } = require("../src/shared/balances");
+const { encryptWithPassword } = require("../src/shared/vault");
+const { state } = require("../src/shared/state");
+const send = require("../src/popup/views/send");
+const confirmTx = require("../src/popup/views/confirmTx");
+
+const PRIVATE_KEY = "0x" + "11".repeat(32);
+const HOLDER = new Wallet(PRIVATE_KEY).address;
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+// A second address of the wallet, and a second recipient.
+const OTHER = "0x" + "e".repeat(40);
+const PASSWORD = "correct horse battery staple";
+
+const GWEI = 1000000000n;
+const GAS = 21000n;
+
+// The Send screen shows this balance as 1.2345 ETH.
+const BALANCE_WEI = 1234567890123456789n;
+
+// A token the bundled list does not know, with enough holders to be listed.
+const TOKEN = "0x" + "d".repeat(40);
+
+// Fee data whose reserve is 21000 gas at `maxFeePerGas`. The expected cost,
+// at gasPrice, is lower, as it is on mainnet.
+function fees(maxFeePerGas) {
+    return {
+        maxFeePerGas,
+        maxPriorityFeePerGas: GWEI,
+        gasPrice: maxFeePerGas / 2n,
+    };
+}
+
+// The balance minus a reserve of 21000 gas at `maxFeePerGas`.
+function maxAfter(maxFeePerGas) {
+    return formatEther(BALANCE_WEI - GAS * maxFeePerGas);
+}
+
+function el(id) {
+    return global.document.getElementById(id);
+}
+
+function text(id) {
+    return el(id).textContent;
+}
+
+// The ETH balance the node reports and the token rows the explorer reports,
+// fetched and stored exactly where the popup stores them.
+async function refreshWith(balanceWei, tokenItems = []) {
+    mockNode.balanceWei = balanceWei;
+    mockExplorer.items = tokenItems;
+    state.wallets = [
+        {
+            type: "key",
+            name: "Wallet 1",
+            encryptedSecret: await encryptWithPassword(PRIVATE_KEY, PASSWORD),
+            addresses: [{ address: HOLDER }],
+        },
+    ];
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    await refreshBalances(
+        state.wallets,
+        "https://rpc.example.invalid",
+        "https://blockscout.example/api/v2",
+        state.trackedTokens,
+        "mainnet",
+    );
+}
+
+function tokenRow(value, decimals = "18") {
+    return {
+        value: String(value),
+        token: {
+            type: "ERC-20",
+            address_hash: TOKEN,
+            symbol: "TOK",
+            name: "Token",
+            decimals,
+            holders_count: "50000",
+        },
+    };
+}
+
+// The confirmation screen Review leads to, once shown.
+let confirmed = null;
+
+// Open the Send screen for `token` ("ETH" or a token address), with the
+// recipient entered.
+function openSend(token = "ETH") {
+    send.init({ showConfirmTx: (info) => (confirmed = info) });
+    confirmTx.init({});
+    send.resetSendValidation();
+    state.currentView = "send";
+    state.selectedToken = token;
+    el("send-to").value = RECIPIENT;
+    el("send-amount").value = "";
+}
+
+async function pressMax() {
+    await el("btn-send-max").handlers.get("click")();
+}
+
+// Press Review and show the confirmation screen with its fee estimate settled.
+async function review() {
+    await el("btn-send-review").handlers.get("click")();
+    confirmTx.show(confirmed);
+    await settle();
+}
+
+// show() starts the fee estimate without awaiting it; this lets it settle.
+async function settle() {
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+function canSend() {
+    return !el("btn-confirm-send").disabled;
+}
+
+beforeEach(() => {
+    elements.clear();
+    confirmed = null;
+    state.selectedToken = null;
+    state.trackedTokens = [];
+    state.fraudContracts = [];
+    state.currentView = null;
+    mockNode.feeData = fees(20n * GWEI);
+    mockNode.broadcast = [];
+});
+
+describe("Max on an ETH send", () => {
+    test("fills in the exact balance minus the fee reserve", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 1.2345 ETH");
+        await pressMax();
+        // 1.234567890123456789 - 21000 * 20 gwei.
+        expect(el("send-amount").value).toBe("1.234147890123456789");
+    });
+
+    test("leaves exactly the fee reserve behind, and the confirmation screen enables Send", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        await pressMax();
+        await review();
+        expect(text("confirm-amount")).toBe(maxAfter(20n * GWEI) + " ETH");
+        expect(el("confirm-errors").innerHTML).toBe("");
+        expect(el("confirm-amount-fee-error").style.visibility).toBe("hidden");
+        expect(canSend()).toBe(true);
+    });
+
+    test("re-derives the amount when the fee estimate changes", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        await pressMax();
+        expect(el("send-amount").value).toBe(maxAfter(20n * GWEI));
+
+        // The fee rises between Max and the confirmation screen's estimate.
+        // Kept, the Send screen's amount would be refused for want of funds.
+        mockNode.feeData = fees(30n * GWEI);
+        await review();
+        expect(text("confirm-amount")).toBe(maxAfter(30n * GWEI) + " ETH");
+        expect(canSend()).toBe(true);
+
+        // And falls when the screen is shown again, as on reopening the popup.
+        mockNode.feeData = fees(10n * GWEI);
+        confirmTx.restore();
+        await settle();
+        expect(text("confirm-amount")).toBe(maxAfter(10n * GWEI) + " ETH");
+        expect(canSend()).toBe(true);
+    });
+
+    test("is signed with the fee its amount leaves behind", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        await pressMax();
+        await review();
+        // The fee the node quotes rises after the estimate. Fetched afresh
+        // at signing, it would make amount plus fee more than the balance.
+        mockNode.feeData = fees(25n * GWEI);
+        el("confirm-tx-password").value = PASSWORD;
+        await el("btn-confirm-send").handlers.get("click")();
+
+        expect(mockNode.broadcast).toHaveLength(1);
+        const tx = Transaction.from(mockNode.broadcast[0]);
+        expect(tx.to).toBe(RECIPIENT);
+        expect(tx.maxFeePerGas).toBe(20n * GWEI);
+        expect(tx.value + tx.gasLimit * tx.maxFeePerGas).toBe(BALANCE_WEI);
+    });
+
+    test("says so instead of filling in an amount when the balance does not cover the fee", async () => {
+        // 0.0001 ETH against a reserve of 0.00042 ETH.
+        await refreshWith(100000000000000n);
+        openSend();
+        await pressMax();
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe(
+            "Your balance does not cover the network fee.",
+        );
+    });
+
+    test("asks for the recipient first, since the fee depends on it", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        el("send-to").value = "";
+        await pressMax();
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe(
+            "Please enter a recipient address first.",
+        );
+    });
+
+    // Holds the node's fee answer, so Max's estimate is still running, until
+    // the returned function is called.
+    function holdFeeEstimate() {
+        let release;
+        mockNode.feeData = new Promise((resolve) => {
+            release = () => resolve(fees(20n * GWEI));
+        });
+        return release;
+    }
+
+    test.each([
+        ["the same address", 0],
+        ["another address", 1],
+    ])(
+        "fills nothing in once Send was left and opened again for %s while the fee was estimated",
+        async (_, addressIndex) => {
+            await refreshWith(BALANCE_WEI);
+            state.wallets[0].addresses.push({
+                address: OTHER,
+                balance: "2.0",
+                tokenBalances: [],
+            });
+            openSend();
+            const release = holdFeeEstimate();
+            const pressed = pressMax();
+
+            // Back, then Send again as home.js opens it, with the same
+            // recipient typed in again.
+            state.selectedAddress = addressIndex;
+            el("send-to").value = "";
+            el("send-amount").value = "";
+            send.resetSendValidation();
+            el("send-to").value = RECIPIENT;
+
+            release();
+            await pressed;
+            expect(el("send-amount").value).toBe("");
+            expect(text("flash-msg")).toBe("");
+        },
+    );
+
+    test("fills nothing in and says nothing once Send was left while the fee was estimated", async () => {
+        // 0.0001 ETH, which does not cover the fee: a result that landed
+        // would say so on whichever screen is shown.
+        await refreshWith(100000000000000n);
+        openSend();
+        const release = holdFeeEstimate();
+        const pressed = pressMax();
+        state.currentView = "home";
+        release();
+        await pressed;
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe("");
+    });
+
+    test("fills nothing in when the recipient changed while the fee was estimated", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        const release = holdFeeEstimate();
+        const pressed = pressMax();
+        el("send-to").value = OTHER;
+        release();
+        await pressed;
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe("");
+    });
+
+    test("fills nothing in when the holding was changed while the fee was estimated", async () => {
+        await refreshWith(BALANCE_WEI, [tokenRow(10n ** 18n)]);
+        // Opened from the home screen, where the dropdown picks the holding.
+        openSend(null);
+        el("send-token").value = "ETH";
+        const release = holdFeeEstimate();
+        const pressed = pressMax();
+        el("send-token").value = TOKEN;
+        el("send-token").handlers.get("change")();
+        release();
+        await pressed;
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe("");
+    });
+
+    test("keeps an amount typed while the fee was estimated", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        const release = holdFeeEstimate();
+        const pressed = pressMax();
+        el("send-amount").value = "0.5";
+        el("send-amount").handlers.get("input")();
+        release();
+        await pressed;
+        expect(el("send-amount").value).toBe("0.5");
+        expect(text("flash-msg")).toBe("");
+    });
+
+    test("fills in once the held fee estimate arrives with nothing changed", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        const release = holdFeeEstimate();
+        const pressed = pressMax();
+        release();
+        await pressed;
+        expect(el("send-amount").value).toBe(maxAfter(20n * GWEI));
+    });
+
+    test("typed over, is an ordinary amount the confirmation screen keeps", async () => {
+        await refreshWith(BALANCE_WEI);
+        openSend();
+        await pressMax();
+        el("send-amount").value = "0.5";
+        el("send-amount").handlers.get("input")();
+        mockNode.feeData = fees(30n * GWEI);
+        await review();
+        expect(text("confirm-amount")).toBe("0.5 ETH");
+    });
+});
+
+describe("Max on a token send", () => {
+    // 1234.567890123456789012 TOK; the Send screen shows 1234.5678.
+    const TOKEN_UNITS = 1234567890123456789012n;
+
+    test("fills in the whole token balance", async () => {
+        await refreshWith(BALANCE_WEI, [tokenRow(TOKEN_UNITS)]);
+        openSend(TOKEN);
+        await pressMax();
+        expect(el("send-amount").value).toBe("1234.567890123456789012");
+        await review();
+        expect(text("confirm-amount")).toBe("1234.567890123456789012 TOK");
+        expect(canSend()).toBe(true);
+    });
+
+    test("of a token with more than 18 decimal places, fills in the balance cut down to the 18 the confirmation screen accepts", async () => {
+        // 1234.567890123456789012999999 TOK at 24 decimal places.
+        await refreshWith(BALANCE_WEI, [
+            tokenRow(1234567890123456789012999999n, "24"),
+        ]);
+        openSend(TOKEN);
+        await pressMax();
+        expect(el("send-amount").value).toBe("1234.567890123456789012");
+        await review();
+        expect(text("confirm-amount")).toBe("1234.567890123456789012 TOK");
+        expect(canSend()).toBe(true);
+    });
+
+    test("is still refused when ETH cannot cover the fee", async () => {
+        await refreshWith(0n, [tokenRow(TOKEN_UNITS)]);
+        openSend(TOKEN);
+        await pressMax();
+        expect(el("send-amount").value).toBe("1234.567890123456789012");
+        await review();
+        expect(el("confirm-gas-error").style.visibility).toBe("visible");
+        expect(canSend()).toBe(false);
+    });
+
+    test("says so when the token balance is unknown", async () => {
+        // No scale from the explorer, the bundled list or a tracked token.
+        const row = tokenRow(TOKEN_UNITS);
+        delete row.token.decimals;
+        await refreshWith(BALANCE_WEI, [row]);
+        openSend(TOKEN);
+        await pressMax();
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe("This token's balance is unknown.");
+    });
+
+    test("says so when the token balance is zero", async () => {
+        state.trackedTokens = [
+            { address: TOKEN, symbol: "TOK", name: "Token", decimals: 18 },
+        ];
+        await refreshWith(BALANCE_WEI, [tokenRow(0n)]);
+        openSend(TOKEN);
+        await pressMax();
+        expect(el("send-amount").value).toBe("");
+        expect(text("flash-msg")).toBe("This token's balance is zero.");
+    });
+});

tests/stateMerge.test.js

@@ -423,3 +423,80 @@ describe("two wallets independently created with a colliding identity", () => {
         expect(secrets).toContain("secret-b");
     });
 });
+
+// showView() saves on every navigation without waiting, so the user can change
+// something while that save is still waiting on storage. The change is followed
+// by its own saveState(), which runs after the first save; it must be stored
+// (https://git.eeqj.de/sneak/AutistMask/issues/448).
+describe("a change made while an earlier save from the same page is running", () => {
+    // Runs `change` inside the next call to `op` (the stub's get or set),
+    // before that call does its work.
+    function runInside(op, change) {
+        const real = op.getMockImplementation();
+        op.mockImplementationOnce(async (arg) => {
+            change();
+            return real(arg);
+        });
+    }
+
+    test("a network switched during the earlier save's read is stored", async () => {
+        const storage = makeStorageStub({
+            autistmask: { wallets: [W1], networkId: "sepolia" },
+        });
+        const { state, saveState, loadState } = loadPage(storage).state;
+        await loadState();
+
+        let queued;
+        runInside(storage.get, () => {
+            state.networkId = "mainnet";
+            queued = saveState();
+        });
+        state.theme = "dark";
+        await saveState();
+        await queued;
+
+        const stored = storage.read("autistmask");
+        expect(stored.theme).toBe("dark");
+        expect(stored.networkId).toBe("mainnet");
+    });
+
+    test("a wallet added during the earlier save's read is stored", async () => {
+        const storage = makeStorageStub({ autistmask: { wallets: [W1] } });
+        const { state, saveState, loadState } = loadPage(storage).state;
+        await loadState();
+
+        let queued;
+        runInside(storage.get, () => {
+            state.wallets.push(W2);
+            queued = saveState();
+        });
+        await saveState();
+        await queued;
+
+        const stored = storage.read("autistmask");
+        expect(stored.wallets.map((w) => w.encryptedSecret)).toEqual([
+            "secret-one",
+            "secret-two",
+        ]);
+    });
+
+    test("a wallet added during the earlier save's write is stored", async () => {
+        const storage = makeStorageStub({ autistmask: { wallets: [W1] } });
+        const { state, saveState, loadState } = loadPage(storage).state;
+        await loadState();
+
+        let queued;
+        runInside(storage.set, () => {
+            state.wallets.push(W2);
+            queued = saveState();
+        });
+        await saveState();
+        await queued;
+
+        const stored = storage.read("autistmask");
+        expect(stored.wallets.map((w) => w.encryptedSecret)).toEqual([
+            "secret-one",
+            "secret-two",
+        ]);
+    });
+});

tests/stateRecovery.test.js

@@ -148,6 +148,173 @@ describe("the destructive reset on the recovery screen", () => {
     });
 });
 
+describe("a popup already open when the stored profile becomes unreadable", () => {
+    // https://git.eeqj.de/sneak/AutistMask/issues/373. The popup used to stay
+    // on the wallet list with the last good balances, and only a reopen
+    // reached the recovery screen.
+    test("moves to the recovery screen at its next refresh", async () => {
+        const env = await bootPopup(unversionedValidProfile());
+        expect(env.visibleViews()).toEqual(["main"]);
+
+        env.storage.write("autistmask", CORRUPT_BLOBS[0].blob);
+        await env.tick();
+
+        expect(env.visibleViews()).toEqual(["state-recovery"]);
+        expect(env.text("state-recovery-problem").length).toBeGreaterThan(10);
+        expect(env.hidden("btn-settings")).toBe(true);
+        expect(env.storage.read("autistmask")).toEqual(CORRUPT_BLOBS[0].blob);
+    });
+
+    test("stops the ten-second refresh", async () => {
+        const env = await bootPopup(unversionedValidProfile());
+        env.storage.write("autistmask", CORRUPT_BLOBS[0].blob);
+        await env.tick();
+        const { refreshBalances } = require("../src/shared/balances");
+        const calls = refreshBalances.mock.calls.length;
+
+        await env.tick();
+
+        expect(refreshBalances).toHaveBeenCalledTimes(calls);
+    });
+
+    test("a later save does not clear what the user exported or typed", async () => {
+        const env = await bootPopup(unversionedValidProfile());
+        env.storage.write("autistmask", CORRUPT_BLOBS[2].blob);
+        await env.tick();
+
+        await env.click("btn-state-recovery-export");
+        env.node("state-recovery-reset-input").value = "erase my";
+        // Such as the save of a refresh already in flight when the screen
+        // went up.
+        const { saveState } = require("../src/shared/state");
+        await expect(saveState()).rejects.toThrow();
+        await env.settle();
+
+        expect(env.visibleViews()).toEqual(["state-recovery"]);
+        expect(env.hidden("state-recovery-blob")).toBe(false);
+        expect(env.value("state-recovery-reset-input")).toBe("erase my");
+    });
+
+    // The record can become readable again under this popup, erased from the
+    // recovery screen of another window, so a save from this one can succeed.
+    test("a popup opened after the record is erased elsewhere shows a screen", async () => {
+        const env = await bootPopup(unversionedValidProfile());
+        env.storage.write("autistmask", CORRUPT_BLOBS[0].blob);
+        await env.tick();
+        expect(env.visibleViews()).toEqual(["state-recovery"]);
+
+        await env.storage.remove("autistmask");
+        const { saveState } = require("../src/shared/state");
+        await saveState();
+
+        const reopened = await bootPopup(env.storage.read("autistmask"));
+        expect(reopened.visibleViews()).toEqual(["welcome"]);
+    });
+
+    test("a stored current view of the recovery screen does not blank the popup", async () => {
+        const env = await bootPopup(
+            unversionedValidProfile({ currentView: "state-recovery" }),
+        );
+        expect(env.visibleViews()).toEqual(["main"]);
+    });
+
+    test("a transaction wait that ends under it does not replace it", async () => {
+        const env = await bootPopup(
+            unversionedValidProfile({
+                currentView: "wait-tx",
+                viewData: {
+                    pendingWait: {
+                        hash: "0x1",
+                        txInfo: { to: ADDRESS, amount: "1", token: "ETH" },
+                        broadcastTime: Date.now(),
+                    },
+                },
+            }),
+        );
+        expect(env.visibleViews()).toEqual(["wait-tx"]);
+        env.storage.write("autistmask", CORRUPT_BLOBS[2].blob);
+        await env.tick();
+        await env.click("btn-state-recovery-export");
+        env.node("state-recovery-reset-input").value = "erase my";
+
+        // The test provider answers no receipt lookup, and six that fail in
+        // a row end the wait with an error.
+        for (let i = 0; i < 6; i++) await env.tick();
+
+        expect(env.text("error-tx-message")).toMatch(/could not be reached/);
+        expect(env.visibleViews()).toEqual(["state-recovery"]);
+        expect(env.hidden("state-recovery-blob")).toBe(false);
+        expect(env.value("state-recovery-reset-input")).toBe("erase my");
+    });
+
+    test("a storage read that fails once leaves the wallet list up", async () => {
+        const env = await bootPopup(unversionedValidProfile());
+
+        env.storage.local.get.mockRejectedValueOnce(
+            new Error("IO error: storage busy"),
+        );
+        await env.tick();
+
+        // Reported as a failed save, not mistaken for an unreadable profile.
+        expect(env.visibleViews()).toEqual(["main"]);
+        expect(env.node("save-failure-banner")).not.toBeNull();
+
+        await env.tick();
+        expect(env.visibleViews()).toEqual(["main"]);
+    });
+
+    // The screen it replaces is left as any navigation leaves it: the rules
+    // at the top of src/popup/views/showPhrase.js and exportPrivkey.js hold
+    // for this way off them too.
+    describe("from a screen holding a secret", () => {
+        const PHRASE =
+            "abandon abandon abandon abandon abandon abandon abandon" +
+            " abandon abandon abandon abandon about";
+
+        afterEach(() => jest.dontMock("../src/shared/vault"));
+
+        test("a recovery phrase on screen is wiped", async () => {
+            jest.doMock("../src/shared/vault", () => ({
+                decryptWithPassword: async () => PHRASE,
+            }));
+            const env = await bootPopup(unversionedValidProfile());
+            require("../src/popup/views/showPhrase").show(0);
+            env.node("show-phrase-password").value = "password";
+            await env.click("btn-show-phrase-reveal");
+            expect(env.text("show-phrase-value")).toBe(PHRASE);
+
+            env.storage.write("autistmask", CORRUPT_BLOBS[0].blob);
+            await env.tick();
+
+            expect(env.visibleViews()).toEqual(["state-recovery"]);
+            expect(env.text("show-phrase-value")).toBe("");
+        });
+
+        test("a private key still being decrypted is never written", async () => {
+            let answer;
+            jest.doMock("../src/shared/vault", () => ({
+                decryptWithPassword: () =>
+                    new Promise((resolve) => {
+                        answer = resolve;
+                    }),
+            }));
+            const env = await bootPopup(unversionedValidProfile());
+            require("../src/popup/views/exportPrivkey").show(0, 0);
+            env.node("export-privkey-password").value = "password";
+            const revealing = env.click("btn-export-privkey-confirm");
+
+            env.storage.write("autistmask", CORRUPT_BLOBS[0].blob);
+            await env.tick();
+            expect(env.visibleViews()).toEqual(["state-recovery"]);
+            expect(env.value("export-privkey-password")).toBe("");
+
+            answer(PHRASE);
+            await revealing;
+            expect(env.text("export-privkey-value")).toBe("");
+        });
+    });
+});
+
 describe("an unversioned profile that is perfectly valid", () => {
     // The upgrade case. Every install in the field is in this state, and the
     // popup must load it, not offer to wipe it.

tests/support/popupBoot.js

@@ -40,6 +40,10 @@ jest.doMock("libsodium-wrappers-sumo", () => sodium);
 jest.doMock("qrcode", () => QRCode);
 jest.doMock("ethereum-blockies-base64", () => makeBlockie);
 
+// Taken before any boot replaces them; see bootPopup().
+const realSetInterval = globalThis.setInterval;
+const realClearInterval = globalThis.clearInterval;
+
 const POPUP_HTML = fs.readFileSync(
     path.join(__dirname, "..", "..", "src", "popup", "index.html"),
     "utf8",
@@ -249,8 +253,6 @@ async function bootPopup(stored, options) {
         formatUsd: () => "",
         formatAddressTotal: () => "",
         getAddressValue: () => ({ usd: null, partial: false }),
-        getWalletValue: () => ({ usd: null, partial: false }),
-        getTotalValue: () => ({ usd: null, partial: false }),
     }));
     jest.doMock("../../src/shared/balances", () => ({
         fetchTokenBalances: jest.fn(async () => []),
@@ -259,9 +261,12 @@ async function bootPopup(stored, options) {
         getProvider: () => ({}),
         scanForAddresses: jest.fn(async () => []),
     }));
+    // filterTransactions() answers in the real one's shape: Home,
+    // AddressDetail and AddressToken read both fields, and a bare list makes
+    // their transaction loading throw into a catch that only logs.
     jest.doMock("../../src/shared/transactions", () => ({
         fetchRecentTransactions: jest.fn(async () => []),
-        filterTransactions: () => [],
+        filterTransactions: () => ({ transactions: [], newFraudContracts: [] }),
     }));
 
     const storage =
@@ -292,9 +297,20 @@ async function bootPopup(stored, options) {
         }),
         addEventListener: () => {},
     };
-    // The 10s refresh loop init() starts would outlive the test.
+    // The ten-second refresh init() starts, and a transaction wait's timers,
-    const realSetInterval = globalThis.setInterval;
+    // would outlive the test. So every interval is recorded rather than
-    globalThis.setInterval = () => 0;
+    // started, clearInterval() removes it as a browser would, and tick() below
+    // runs the ones still set. Put back by cleanupPopup().
+    const intervals = new Map();
+    let lastId = 0;
+    globalThis.setInterval = (fn) => {
+        lastId += 1;
+        intervals.set(lastId, fn);
+        return lastId;
+    };
+    globalThis.clearInterval = (id) => {
+        intervals.delete(id);
+    };
 
     require("../../src/popup/index");
 
@@ -316,8 +332,6 @@ async function bootPopup(stored, options) {
     }
     await settle();
 
-    globalThis.setInterval = realSetInterval;
-
     return {
         storage,
         document,
@@ -337,6 +351,12 @@ async function bootPopup(stored, options) {
             for (const fn of fns) await fn();
             await settle();
         },
+        // Every interval still set runs once: the ten-second refresh, and a
+        // transaction wait's receipt poll and elapsed counter while one runs.
+        tick: async () => {
+            for (const fn of intervals.values()) await fn();
+            await settle();
+        },
         settle,
         // The view ids whose section is not hidden, as the audit measured them.
         visibleViews: () => {
@@ -354,6 +374,8 @@ function cleanupPopup() {
     delete globalThis.chrome;
     delete globalThis.document;
     delete globalThis.window;
+    globalThis.setInterval = realSetInterval;
+    globalThis.clearInterval = realClearInterval;
 }
 
 module.exports = {

tests/timestampDisplay.test.js

@@ -0,0 +1,159 @@
+// A transaction's time is written by isoDate() and timeAgo() in
+// src/popup/views/helpers.js on every screen that shows one (README, Display
+// Consistency; https://git.eeqj.de/sneak/AutistMask/issues/168). AddressDetail
+// and AddressToken used to define their own copies, so a fix to the shared pair
+// would not have reached them.
+//
+// The pair is replaced before the views are loaded, because a view takes it
+// when it loads. A view that writes the time with a copy of its own shows the
+// real time instead of the replacement.
+//
+// Driven against a minimal DOM stub in the shape
+// tests/contractCreation.test.js uses.
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    // The transaction detail view fetches on-chain details after drawing; an
+    // answer that is not ok leaves the drawn lines as they are.
+    debugFetch: async () => ({ ok: false }),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The history lists ask the explorer for their transactions and resolve ENS
+// names for them; here the explorer answers with mockHistory and no name
+// resolves.
+let mockHistory = [];
+jest.mock("../src/shared/transactions", () => ({
+    ...jest.requireActual("../src/shared/transactions"),
+    fetchRecentTransactions: async () => mockHistory,
+}));
+jest.mock("../src/shared/ens", () => ({
+    ...jest.requireActual("../src/shared/ens"),
+    resolveEnsNames: async () => new Map(),
+}));
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const helpers = require("../src/popup/views/helpers");
+jest.spyOn(helpers, "isoDate").mockReturnValue("SHARED-ISO-DATE");
+jest.spyOn(helpers, "timeAgo").mockReturnValue("SHARED-TIME-AGO");
+
+const { state } = require("../src/shared/state");
+const addressDetail = require("../src/popup/views/addressDetail");
+const addressToken = require("../src/popup/views/addressToken");
+const transactionDetail = require("../src/popup/views/transactionDetail");
+
+const FROM = "0x0000000000000000000000000000000000000a11";
+const RECIPIENT = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+
+function makeElement(id) {
+    const el = {
+        id,
+        textContent: "",
+        value: "",
+        innerHTML: "",
+        style: {},
+        dataset: {},
+        classList: {
+            add: () => {},
+            remove: () => {},
+            contains: () => false,
+            toggle: () => false,
+        },
+        addEventListener: () => {},
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+// A transaction FROM sent, as the history lists hold it.
+function historyTx() {
+    return {
+        hash: "0x85215772ed26ea8b39c2b3b18779030487efbe0b5fd7e882592b2f62b837be84",
+        from: FROM,
+        to: RECIPIENT,
+        value: "0.0000",
+        exactValue: "0.0",
+        rawAmount: "0",
+        rawUnit: "wei",
+        symbol: "ETH",
+        timestamp: 1790000000,
+        isError: false,
+        directionLabel: "Sent",
+        direction: "sent",
+        contractAddress: null,
+    };
+}
+
+beforeEach(() => {
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" } };
+    state.wallets = [
+        {
+            name: "Main",
+            type: "key",
+            addresses: [{ address: FROM, balance: "0.0000" }],
+        },
+    ];
+    state.trackedTokens = [];
+    state.viewData = {};
+    state.viewStack = [];
+    state.currentView = null;
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    state.selectedToken = "ETH";
+});
+
+describe.each([
+    ["AddressDetail", "tx-list", () => addressDetail.show()],
+    ["AddressToken", "address-token-tx-list", () => addressToken.show()],
+])("a transaction history row on %s", (_name, listId, open) => {
+    test("shows the time written by the shared isoDate() and timeAgo()", async () => {
+        mockHistory = [historyTx()];
+        open();
+        // The list is drawn once the history has been fetched.
+        await new Promise((resolve) => setTimeout(resolve, 0));
+        const html = node(listId).innerHTML;
+        expect(html).toContain('title="SHARED-ISO-DATE"');
+        expect(html).toContain(">SHARED-TIME-AGO<");
+    });
+});
+
+test("the transaction detail view shows the time written by the shared isoDate() and timeAgo()", () => {
+    transactionDetail.show(historyTx());
+    const html = node("tx-detail-time").innerHTML;
+    expect(html).toContain("SHARED-ISO-DATE");
+    expect(html).toContain("(SHARED-TIME-AGO)");
+});

tests/transactions.test.js

@@ -1219,7 +1219,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
 
     test("queries only the two Blockscout endpoints for the address", async () => {
         respondWith([], []);
-        await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(debugFetch).toHaveBeenCalledTimes(2);
         const urls = debugFetch.mock.calls.map((c) => c[0]);
         expect(urls).toContain(
@@ -1283,7 +1283,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
             ],
         );
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs).toHaveLength(1);
         const merged = txs[0];
         // The received leg (the swap output) supplies the display amount.
@@ -1320,7 +1320,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
             ],
         );
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs).toHaveLength(1);
         expect(txs[0].symbol).toBe("USDC");
         expect(txs[0].value).toBe("1500.5000");
@@ -1346,7 +1346,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
         });
         respondWith([], [leg("1000000"), leg("2000000")]);
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs).toHaveLength(1);
         // Keyed by hash plus contract, so the later leg wins.
         expect(txs[0].exactValue).toBe("2.0");
@@ -1386,7 +1386,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
             ],
         );
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs.map((t) => t.symbol).sort()).toEqual(["USDC", "WETH"]);
     });
 
@@ -1427,12 +1427,13 @@ describe("fetchRecentTransactions merge and dedup", () => {
             ],
         );
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs).toHaveLength(1);
         expect(txs[0].symbol).toBe("USDC");
         expect(txs[0].exactValue).toBe("1.0");
         expect(txs[0].direction).toBe("sent");
         expect(txs[0].contractAddress).toBe(USDC_CONTRACT);
+        expect(txs[0].chainId).toBe("0x1");
         // The surviving row is the token row, and the filters keep it.
         const kept = filterTransactions(txs, filters()).transactions;
         expect(kept).toHaveLength(1);
@@ -1452,10 +1453,46 @@ describe("fetchRecentTransactions merge and dedup", () => {
         });
         respondWith([item(6), item(8), item(7)], []);
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, 2);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1", 2);
         expect(txs.map((t) => t.blockNumber)).toEqual([21000008, 21000007]);
     });
 
+    // https://git.eeqj.de/sneak/AutistMask/issues/372: the caller hands in
+    // the chain id of the network the explorer serves. Every entry carries
+    // it, and a native entry is labelled with that network's nativeCurrency.
+    test("a native entry is labelled by the chain id handed in", async () => {
+        respondWith(
+            [
+                {
+                    hash: "0x" + "a".repeat(64),
+                    block_number: 21000090,
+                    timestamp: TS,
+                    from: { hash: ORDINARY_PEER },
+                    to: { hash: VICTIM, is_contract: false },
+                    value: "10000000000000000",
+                    method: null,
+                    status: "ok",
+                },
+            ],
+            [],
+        );
+        const sepolia = await fetchRecentTransactions(
+            VICTIM,
+            BLOCKSCOUT,
+            "0xaa36a7",
+        );
+        expect(sepolia[0].symbol).toBe("SepoliaETH");
+        expect(sepolia[0].value).toBe("0.0100");
+        expect(sepolia[0].chainId).toBe("0xaa36a7");
+        const mainnet = await fetchRecentTransactions(
+            VICTIM,
+            BLOCKSCOUT,
+            "0x1",
+        );
+        expect(mainnet[0].symbol).toBe("ETH");
+        expect(mainnet[0].chainId).toBe("0x1");
+    });
+
     test("the fake token transfer survives fetching and is then filtered", async () => {
         respondWith(
             [],
@@ -1476,7 +1513,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
             ],
         );
 
-        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+        const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1");
         expect(txs).toHaveLength(1);
         expect(txs[0].contractAddress).toBe(FAKE_ETH_CONTRACT);
         expect(txs[0].holders).toBe(0);
@@ -1515,19 +1552,31 @@ describe("fetchRecentTransactions merge and dedup", () => {
 
         test("an omitted holders_count parses to null", async () => {
             respondWith([], spamTransferWithToken(OMITTED));
-            const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+            const txs = await fetchRecentTransactions(
+                VICTIM,
+                BLOCKSCOUT,
+                "0x1",
+            );
             expect(txs[0].holders).toBeNull();
         });
 
         test("a null holders_count parses to null", async () => {
             respondWith([], spamTransferWithToken(NULLED));
-            const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+            const txs = await fetchRecentTransactions(
+                VICTIM,
+                BLOCKSCOUT,
+                "0x1",
+            );
             expect(txs[0].holders).toBeNull();
         });
 
         test("the transfer survives the low-holder filter", async () => {
             respondWith([], spamTransferWithToken(OMITTED));
-            const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+            const txs = await fetchRecentTransactions(
+                VICTIM,
+                BLOCKSCOUT,
+                "0x1",
+            );
             expect(filterTransactions(txs, filters()).transactions).toEqual(
                 txs,
             );
@@ -1539,7 +1588,11 @@ describe("fetchRecentTransactions merge and dedup", () => {
         // holder count is the only rule that can catch it.
         test('a reported holders_count of "0" still parses to 0 and is filtered', async () => {
             respondWith([], spamTransferWithToken(ZERO));
-            const txs = await fetchRecentTransactions(VICTIM, BLOCKSCOUT);
+            const txs = await fetchRecentTransactions(
+                VICTIM,
+                BLOCKSCOUT,
+                "0x1",
+            );
             expect(txs[0].holders).toBe(0);
             expect(filterTransactions(txs, filters()).transactions).toEqual([]);
         });
@@ -1555,7 +1608,7 @@ describe("fetchRecentTransactions merge and dedup", () => {
             },
         }));
         await expect(
-            fetchRecentTransactions(VICTIM, BLOCKSCOUT),
+            fetchRecentTransactions(VICTIM, BLOCKSCOUT, "0x1"),
         ).resolves.toEqual([]);
     });
 

tests/txValidation.test.js

@@ -6,6 +6,8 @@ const {
     FEE_UNAVAILABLE,
     feeReserveWei,
     feeEstimateWei,
+    maxEthAmount,
+    maxTokenAmount,
     toFixedPoint,
     validateTransfer,
 } = require("../src/shared/txValidation");
@@ -306,6 +308,72 @@ describe("feeEstimateWei", () => {
     });
 });
 
+// The amount the Send screen's Max fills in for ETH: the exact balance, as
+// balances.js stores it, minus the fee reserve. Never the four-decimal balance
+// the Send screen shows.
+describe("maxEthAmount", () => {
+    // The Send screen shows this balance as 1.2345.
+    const BALANCE = "1.234567890123456789";
+
+    test("is the exact balance minus the fee, to the wei", () => {
+        expect(maxEthAmount(BALANCE, FEE)).toBe("1.234147890123456789");
+        expect(
+            parseEther(BALANCE) - parseEther(maxEthAmount(BALANCE, FEE)),
+        ).toBe(FEE);
+    });
+
+    test("passes validateTransfer with exactly the fee left behind", () => {
+        const r = validateTransfer({
+            isErc20: false,
+            amount: maxEthAmount(BALANCE, FEE),
+            ethBalance: BALANCE,
+            feeStatus: FEE_KNOWN,
+            feeWei: FEE,
+        });
+        expect(r).toEqual({ canSend: true, codes: [] });
+    });
+
+    test("is one wei when the balance is one wei more than the fee", () => {
+        expect(maxEthAmount("0.000420000000000001", FEE)).toBe(
+            "0.000000000000000001",
+        );
+    });
+
+    test("is null when the balance does not cover the fee", () => {
+        expect(maxEthAmount("0.0001", FEE)).toBe(null);
+        expect(maxEthAmount("0.0", FEE)).toBe(null);
+    });
+
+    test("is null when the balance covers the fee and nothing more", () => {
+        expect(maxEthAmount("0.00042", FEE)).toBe(null);
+    });
+
+    test("is null on a balance or fee it cannot do exact arithmetic on", () => {
+        expect(maxEthAmount(undefined, FEE)).toBe(null);
+        expect(maxEthAmount("not a number", FEE)).toBe(null);
+        expect(maxEthAmount(BALANCE, null)).toBe(null);
+        expect(maxEthAmount(BALANCE, -1n)).toBe(null);
+        expect(maxEthAmount(BALANCE, 420000000000000)).toBe(null);
+    });
+});
+
+// The amount the Send screen's Max fills in for a token.
+describe("maxTokenAmount", () => {
+    test("cuts a balance with more than 18 places down, never up", () => {
+        const amount = maxTokenAmount("1234.567890123456789012999999");
+        expect(amount).toBe("1234.567890123456789012");
+        expect(toFixedPoint(amount)).not.toBe(null);
+    });
+
+    test("leaves a balance with 18 places or fewer as it is", () => {
+        expect(maxTokenAmount("0.123456789012345678")).toBe(
+            "0.123456789012345678",
+        );
+        expect(maxTokenAmount("1.5")).toBe("1.5");
+        expect(maxTokenAmount("100")).toBe("100");
+    });
+});
+
 // Everything that is not a usable fee blocks exactly as FEE_UNAVAILABLE does.
 // Each of these previously returned { canSend: true, codes: [] } — counting no
 // fee at all, on a full-balance send, in the direction that lets money out.

tests/uniswap.test.js

@@ -554,6 +554,33 @@ describe("uniswap decoder", () => {
         );
     });
 
+    test("shows the deadline as a UTC date and time", () => {
+        const result = uniswap.decode(FIRST_SWAP_CALLDATA, ROUTER_ADDR);
+        expect(detail(result, "Deadline").value).toBe("2026-02-27 08:25:51");
+    });
+
+    // A JavaScript date cannot hold this deadline. It used to make the whole
+    // swap undecoded.
+    test("a deadline of the uint256 maximum is stated in words", () => {
+        const data = buildExecute(
+            "0x08", // V2_SWAP_EXACT_IN
+            [
+                encodeV2SwapExactIn(USER_ADDR, 1000000n, 500000000000000n, [
+                    USDT_ADDR,
+                    WETH_ADDR,
+                ]),
+            ],
+            2n ** 256n - 1n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result).not.toBeNull();
+        expect(result.name).toBe("Swap USDT \u2192 WETH");
+        expect(detail(result, "Deadline").value).toBe(
+            "After 275760-09-13 00:00:00 (no deadline in practice)",
+        );
+    });
+
     test("formats permit amount when not unlimited", () => {
         const data = buildExecute(
             "0x0a",
@@ -831,6 +858,104 @@ describe("uniswap decoder", () => {
         expect(detail(result, "Min. received").value).toBe("0.9900 USDC");
     });
 
+    // https://git.eeqj.de/sneak/AutistMask/issues/415 — the router's V2
+    // exact-in reads an amountIn of zero as universal-router
+    // Constants.ALREADY_PAID: an earlier step sent the tokens to the pair, and
+    // the swap uses all of them. Against 375998b this read "0.0000 USDT".
+    test("a V2 exact-in already-paid amountIn is named, not printed as zero", () => {
+        const data = buildExecute(
+            "0x08",
+            [
+                encodeV2SwapExactIn(
+                    USER_ADDR,
+                    0n, // Constants.ALREADY_PAID
+                    500000000000000n,
+                    [USDT_ADDR, WETH_ADDR],
+                ),
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result).not.toBeNull();
+
+        expect(detail(result, "Token In").value).toContain("USDT");
+        expect(detail(result, "Amount").value).toBe(
+            "Whatever an earlier step sent to the pair (V2 already paid)",
+        );
+        expect(detail(result, "Amount").rawValue).toBe(
+            "Whatever an earlier step sent to the pair (V2 already paid)",
+        );
+        expect(detail(result, "Min. received").value).toBe("0.0005 WETH");
+    });
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/415 — the router passes a
+    // BALANCE_CHECK_ERC20 whenever the balance is at least minBalance, so a
+    // zero one guarantees nothing. Against 375998b it replaced the swap's
+    // output side: Token Out = USDC, Min. received = "None (no minimum
+    // guaranteed)".
+    test("a zero balance check keeps the minimum a swap step stated", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x08, 0x0e]),
+            [
+                encodeV2SwapExactIn(USER_ADDR, 1000000n, 500000000000000n, [
+                    USDT_ADDR,
+                    WETH_ADDR,
+                ]),
+                encodeBalanceCheck(USER_ADDR, USDC_ADDR, 0n),
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result).not.toBeNull();
+
+        expect(detail(result, "Token Out").value).toContain("WETH");
+        expect(detail(result, "Min. received").value).toBe("0.0005 WETH");
+    });
+
+    // A nonzero balance check still replaces the output side, as before.
+    test("a nonzero balance check replaces the minimum a swap step stated", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x08, 0x0e]),
+            [
+                encodeV2SwapExactIn(USER_ADDR, 1000000n, 500000000000000n, [
+                    USDT_ADDR,
+                    WETH_ADDR,
+                ]),
+                encodeBalanceCheck(USER_ADDR, USDC_ADDR, 2000000n),
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result).not.toBeNull();
+
+        expect(detail(result, "Token Out").value).toContain("USDC");
+        expect(detail(result, "Min. received").value).toBe("2.0000 USDC");
+    });
+
+    // With no minimum stated before it, a zero balance check is what sets the
+    // output side, and it guarantees nothing.
+    test("a zero balance check with no earlier minimum states no minimum", () => {
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x0b, 0x0e]),
+            [
+                encodeWrapEth(ROUTER_ADDR, 1000000000000000000n),
+                encodeBalanceCheck(USER_ADDR, USDT_ADDR, 0n),
+            ],
+            9999999999n,
+        );
+
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(result).not.toBeNull();
+
+        expect(detail(result, "Token Out").value).toContain("USDT");
+        expect(detail(result, "Min. received").value).toBe(
+            "None (no minimum guaranteed)",
+        );
+    });
+
     // Pins what https://git.eeqj.de/sneak/AutistMask/pulls/356 changed without
     // testing: a non-swap execute() carrying only PERMIT2_PERMIT names no
     // output currency, so it says so and titles itself "Uniswap Swap" rather