fix: a V4 swap action not in the deployed shape is shown as not decoded (closes #358)

The four V4 swap actions are read only as the parameter structs deployed
on mainnet and Sepolia. ethers decoded the newer v4-periphery structs,
which add minHopPriceX36, as the deployed ones without an error, and the
newer multi-hop exact-in struct showed the offset of its hop-price array
as the swap amount. A decode now counts only when encoding it again gives
back the same bytes. When a swap action fails that, its step is listed as
"V4 Swap (could not be decoded)", and a token line left without a
currency reads "Unknown (could not be decoded)" rather than "not named in
the calldata". The README records both.

Model: opus-5-5

README.md

@@ -239,8 +239,12 @@ provide:
   `make check` stays non-mutating. Linting runs only in the container, because
   an ESLint result that depends on whichever ESLint the host happens to have is
   not a result, so docker is required to lint.
-- `script/fmt` — format all files (writes), on the host
-- `script/fmt-check` — check formatting (read-only), on the host
+- `script/fmt` — format all files (writes), on the host, with the `prettier`
+  that `script/bootstrap` installs in `node_modules/`; when that one is missing
+  it fails and says to run `script/bootstrap`, instead of using a `prettier`
+  from the `PATH`
+- `script/fmt-check` — check formatting (read-only), on the host, with the same
+  `prettier` and the same refusal
 - `script/check` — run `script/test`, `script/lint` and `script/fmt-check`
 - `script/check-censored` — assert the competitor name RULES.md bars appears
   nowhere in the working tree or under `dist/` outside its documented
@@ -422,11 +426,12 @@ captured at `eth_sendRawTransaction` rather than against anything the extension
 reported, rejecting each prompt is required to return a rejection to the page
 rather than hang or resolve, a network switch request is required to leave the
 stored network unchanged and send no `chainChanged` until it is approved, a
-prompt raised while another approval window has focus is required to open a
-window of its own, and the password is required to be absent from every message
-the approval window sends to the background — with the message that would carry
-it required to be present, so that check cannot pass by observing nothing. That
-last one is the standing floor under
+network switch in Settings is required to send the page `chainChanged` with the
+new chain id, a prompt raised while another approval window has focus is
+required to open a window of its own, and the password is required to be absent
+from every message the approval window sends to the background — with the
+message that would carry it required to be present, so that check cannot pass by
+observing nothing. That last one is the standing floor under
 [#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
 
 The limits of that coverage and of the rest of the Chrome suite, none of them
@@ -1105,14 +1110,16 @@ read:
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
-that side. An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side
-is WETH, on mainnet or Sepolia, or when no step set the output side; a WETH
-`Min. received` figure then reads in ETH. Otherwise `Token Out` and
-`Min. received` keep the output side's own token and figure, whether the swap
-was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
-unwraps the WETH it did not spend shows USDC. The token permission warning on
-the signature screen has its own amount wording, including `Unknown`; the
-SignApproval section below describes it.
+that side, or `Unknown (could not be decoded)` instead when a V4 swap action in
+the transaction could not be read (see Transaction Decoding below). An
+`UNWRAP_WETH` step makes `Token Out` ETH only when the output side is WETH, on
+mainnet or Sepolia, or when no step set the output side; a WETH `Min. received`
+figure then reads in ETH. Otherwise `Token Out` and `Min. received` keep the
+output side's own token and figure, whether the swap was paid in ETH or in a
+token: a V2 exact-out swap that buys USDC and then unwraps the WETH it did not
+spend shows USDC. The token permission warning on the signature screen has its
+own amount wording, including `Unknown`; the SignApproval section below
+describes it.
 
 The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
 `2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
@@ -1789,7 +1796,8 @@ view would leave a wallet one click from deletion.
       network changes only here, or when the user approves a site's request on
       **NetworkApproval**; either way, switching restores the RPC and Blockscout
       endpoints last used on that network, or that network's defaults if it has
-      none
+      none, and sends `chainChanged` with the new chain id to every open tab.
+      Choosing the network already active changes nothing and sends nothing
     - Ethereum RPC: endpoint URL input + "Save" button (validated against
       `eth_chainId` before being saved)
     - Blockscout API: endpoint URL input + "Save" button (validated against
@@ -2158,6 +2166,13 @@ view would leave a wallet one click from deletion.
     - Typed data that states no primary type, or one other than the type it
       would be signed as, or that cannot be read → shown with the error line
       saying so and "Sign" disabled; only "Reject" remains
+    - Typed data whose domain `chainId` names a chain other than the active
+      network's → shown with the error line naming both chain ids and "Sign"
+      disabled; only "Reject" remains. EIP-712 asks for this, because the
+      signature is valid on the chain the domain names. Typed data with no
+      `chainId` is not refused. The background refuses such a signature too,
+      against the network active when the signature reaches it, and answers the
+      site with the same sentence
     - A `personal_sign` or `eth_sign` message that is not hex (`0x` or `0X` and
       an even number of hex digits, the form ethers' `getBytes` reads when
       signing) → shown as plain text, with the error line "This message is plain
@@ -2650,7 +2665,8 @@ plaintext list of anyone's domain names.
 When a dApp on a blocklisted domain requests a wallet connection, transaction
 approval, or signature, the approval popup displays a prominent red warning
 banner alerting the user. The domain checker matches exact hostnames and all
-parent domains (subdomain matching).
+parent domains (subdomain matching), and checks a hostname written with a
+trailing dot (`name.`) as `name`.
 
 #### Transaction Decoding
 
@@ -2676,7 +2692,11 @@ Currently supported:
   or recipient, and amount.
 - **Uniswap Universal Router**: `execute()` calls — shows swap direction (e.g.
   "Swap USDT → ETH"), token addresses, amounts, execution steps, and deadline.
-  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks.
+  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks. A V4 swap
+  action is read only in the parameter shape deployed on mainnet and Sepolia,
+  not in the newer one on `v4-periphery` `main`, which adds a `minHopPriceX36`
+  field. An action in any other shape is not read, and its step is listed as
+  `V4 Swap (could not be decoded)`.
 
 ### Non-Goals Forever
 

TODO.md

@@ -2,10 +2,9 @@
 
 - `git pull` `next` and cut a branch from it — one branch per issue, named
   `issue-<N>-<slug>`. Never branch from `main`.
-- Do the work as one commit whose title ends with ` (closes #N)`, with the
-  `TODO.md` update in that same commit.
-- Move Next Step to the top of Completed Steps; move the top item of Future
-  Steps into Next Step.
+- Do the work as one commit whose title ends with ` (closes #N)`.
+- Add no entry to Completed Steps. What landed is recorded on the tracker and in
+  `git log`, where each commit title names the issue it closes.
 - Run `make fmt`, then `make check`. A feature branch may be red; `next` and
   `main` may not.
 - Rebase onto current `next` immediately before pushing — other branches land on
@@ -54,6 +53,15 @@ then continue tagging as milestones land.
   anything around it to carry the `hidden` class that `showView()` puts on every
   view but the current one. No caller changed.
 
+- 2026-10-08: Switching the network in Settings now tells open pages
+  ([#500](https://git.eeqj.de/sneak/AutistMask/issues/500)). Once the switch is
+  saved, Settings asks the background to send `chainChanged` with the new chain
+  id to every open tab, through the same function an approved site request uses.
+  Choosing the network already active changes nothing and sends nothing. Only
+  the extension's own pages can ask for this. `tests/chainSwitchGate.test.js`
+  drives the real Settings view against the background, and the Chrome suite
+  checks that the test page hears both switches.
+
 - 2026-10-07: A site can no longer switch the wallet's network by itself
   ([#408](https://git.eeqj.de/sneak/AutistMask/issues/408)). A connected site's
   `wallet_switchEthereumChain` request for the other supported network opens a

script/fmt

@@ -25,6 +25,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt: this repo's prettier is not installed in node_modules/," \
+            "so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Formatting..."
     run_yarn run fmt
 }

script/fmt-check

@@ -26,6 +26,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt-check: this repo's prettier is not installed in" \
+            "node_modules/, so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Checking formatting..."
     run_yarn run fmt-check
 }

src/background/index.js

@@ -22,6 +22,7 @@ const { debugFetch, log } = require("../shared/log");
 const {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     failureIsRetryable,
     describeTxFailure,
     sameAddress,
@@ -632,8 +633,9 @@ function isExtensionSender(sender) {
 // had refused.
 //
 // TX and sign approvals do not decide here. They stay pending across a
-// disconnect — the user can reopen the toolbar popup — and are rejected by the
-// windows.onRemoved listener below.
+// disconnect. When their window closes, the windows.onRemoved listener below
+// rejects them, unless an approved attempt is still running, in which case
+// that attempt answers the page.
 runtime.onConnect.addListener((port) => {
     if (port.name.startsWith("approval:")) {
         const id = port.name.split(":")[1];
@@ -661,7 +663,9 @@ runtime.onConnect.addListener((port) => {
             const approval = pendingApprovals[id];
             if (approval) {
                 if (approval.type === "tx" || approval.type === "sign") {
-                    // Keep pending — user can reopen the toolbar popup
+                    // When its window closes, windows.onRemoved rejects it,
+                    // unless an approved attempt is still running, in which
+                    // case that attempt answers the page.
                     return;
                 }
                 settleApproval(id, { approved: false, remember: false });
@@ -1471,6 +1475,7 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
         "AUTISTMASK_ADDRESSES_REMOVED",
         "AUTISTMASK_GET_CONNECTED_SITES",
         "AUTISTMASK_REMOVE_SITE",
+        "AUTISTMASK_NETWORK_CHANGED",
     ];
     if (POPUP_ONLY_TYPES.includes(msg.type) && !isExtensionSender(sender)) {
         sendResponse({ error: "Unauthorized sender" });
@@ -1763,7 +1768,8 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
 
         (async () => {
             try {
-                const activeAddress = await getActiveAddress();
+                const s = await getState();
+                const activeAddress = activeAddressOf(s);
                 // Same as the transaction path: the address the approval named
                 // is the one that must have signed, and a switch since then is
                 // a refusal rather than a signature from another account.
@@ -1782,6 +1788,20 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
                     signature,
                     approval.approvedFrom,
                 );
+                // The sign screen refuses typed data whose domain names
+                // another chain. A signature for it that arrives anyway is
+                // refused here, against the network active now.
+                const sp = approval.signParams;
+                if (
+                    sp.method === "eth_signTypedData_v4" ||
+                    sp.method === "eth_signTypedData"
+                ) {
+                    const refusal = typedDataChainRefusal(
+                        JSON.parse(sp.typedData).domain,
+                        networkById(s.networkId),
+                    );
+                    if (refusal) throw new ApprovalMismatchError(refusal);
+                }
                 settleApproval(msg.id, { signature }, { holdsClaim: true });
                 sendResponse({ signature });
             } catch (e) {
@@ -1854,6 +1874,13 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
         broadcastSiteRemoved(msg.origin);
         return false;
     }
+
+    // Settings switched the network and has saved it. Open tabs are told the
+    // new chain id the same way as after a site's approved switch request.
+    if (msg.type === "AUTISTMASK_NETWORK_CHANGED") {
+        broadcastChainChanged(msg.chainId);
+        return false;
+    }
 });
 
 module.exports = { PROXY_METHODS };

src/popup/index.html

@@ -7,9 +7,10 @@
         <link rel="stylesheet" href="styles.css" />
     </head>
     <!-- Chrome gives extension pages a stylesheet of its own that sets the
-         font on body, and a Tailwind class beats it only when marked
-         important: hence font-mono! rather than font-mono. -->
-    <body class="bg-bg text-fg font-mono! text-sm">
+         font and its size on body, and a Tailwind class beats it only when
+         marked important: hence font-mono! and text-sm! rather than
+         font-mono and text-sm. -->
+    <body class="bg-bg text-fg font-mono! text-sm!">
         <div id="app" class="p-2 pr-5 overflow-x-hidden">
             <!-- ============ GLOBAL TITLE BAR ============ -->
             <div
@@ -87,11 +88,14 @@
 
                 <!-- Mnemonic form section -->
                 <div id="add-wallet-section-mnemonic">
-                    <p class="mb-2">
-                        Enter your 12 or 24 word recovery phrase below, or click
-                        the button to roll the die for a new one.
-                    </p>
-                    <div class="mb-1 flex justify-end">
+                    <!-- The die button shares the instruction's row: on a row
+                         of its own it pushes Import below the fold at
+                         360x600. -->
+                    <div class="mb-2 flex justify-between items-start gap-2">
+                        <p>
+                            Enter your 12 or 24 word recovery phrase below, or
+                            click the button to roll the die for a new one.
+                        </p>
                         <button
                             id="btn-generate-phrase"
                             class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer text-xs"

src/popup/views/approval.js

@@ -12,7 +12,7 @@ const {
     formatFee,
     tokenLabel,
 } = require("./helpers");
-const { state, saveState } = require("../../shared/state");
+const { state, saveState, currentNetwork } = require("../../shared/state");
 const {
     networkById,
     networkByChainId,
@@ -46,7 +46,10 @@ const {
 const { decryptWithPassword } = require("../../shared/vault");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { walletDefect } = require("../../shared/walletDefects");
-const { describeSigningFailure } = require("../../shared/approvalVerify");
+const {
+    describeSigningFailure,
+    typedDataChainRefusal,
+} = require("../../shared/approvalVerify");
 const txStatus = require("./txStatus");
 const uniswap = require("../../shared/uniswap");
 const { notify, runtimeApi, sendMessage } = require("../../shared/browserApi");
@@ -443,7 +446,8 @@ function signedPrimaryType(types) {
 // Why a signature request cannot be signed, as a sentence for the error line,
 // or null when it can. Only typed data is refused: the `primaryType` the page
 // states has to be the type ethers will sign, or this screen would name one
-// message while another is signed.
+// message while another is signed. Its domain may name no chain but the active
+// network's.
 function typedDataRefusal(sp) {
     if (sp.method === "personal_sign" || sp.method === "eth_sign") return null;
     let data;
@@ -466,7 +470,7 @@ function typedDataRefusal(sp) {
             ", so it cannot be signed."
         );
     }
-    return null;
+    return typedDataChainRefusal(data.domain, currentNetwork());
 }
 
 // The largest amount a Permit2 allowance can hold, a uint160. Permit2 treats

src/popup/views/settings.js

@@ -316,7 +316,11 @@ function init(ctx) {
     const networkSelect = $("settings-network");
     networkSelect.addEventListener("change", async () => {
         const newId = networkSelect.value;
+        if (newId === state.networkId) return;
         const net = await onChainSwitch(newId);
+        // Open pages are told by the background, as after a site's approved
+        // switch request.
+        notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
         $("settings-rpc").value = state.rpcUrl;
         $("settings-blockscout").value = state.blockscoutUrl;
         showFlash("Switched to " + net.name + ".");

src/shared/approvalVerify.js

@@ -53,6 +53,7 @@ const {
     accessListify,
     formatEther,
     getAddress,
+    getBigInt,
     getBytes,
     toQuantity,
     verifyMessage,
@@ -635,6 +636,33 @@ function verifySignature(signParams, signature, expectedFrom) {
     return recovered;
 }
 
+// Why typed data cannot be signed while `network` is the active network, as a
+// sentence, or null when it can. EIP-712 has a wallet refuse typed data whose
+// domain names another chain, because the signature is valid on that chain.
+// ethers signs no chain id when the domain's is null or absent, and reads any
+// other with getBigInt(), so 1, "1" and "0x1" are the same chain here too.
+function typedDataChainRefusal(domain, network) {
+    const chainId = domain?.chainId;
+    if (chainId === undefined || chainId === null) return null;
+    let named;
+    try {
+        named = getBigInt(chainId);
+    } catch {
+        return "This typed data cannot be read, so it cannot be signed.";
+    }
+    const active = getBigInt(network.chainId);
+    if (named === active) return null;
+    return (
+        "This typed data is for chain id " +
+        named +
+        ", but the active network is " +
+        network.name +
+        " (chain id " +
+        active +
+        "), so it cannot be signed."
+    );
+}
+
 // The stage a transaction approval failed at. Which stage it is decides
 // whether the approval survives the failure.
 const TX_STAGE_SIGN = "sign";
@@ -796,6 +824,7 @@ function describeSigningFailure(response, fallbackMessage) {
 module.exports = {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     assertNoForbiddenFields,
     assertNothingUnchecked,
     assertCanonicalBytes,

src/shared/phishingDomains.js

@@ -110,11 +110,14 @@ function hashListed(hash) {
  * Generate hostname variants for subdomain matching.
  * "sub.evil.com" yields ["sub.evil.com", "evil.com"].
  *
+ * A trailing dot is dropped: "evil.com." is the fully qualified spelling of
+ * "evil.com", and the browser loads the same site from either.
+ *
  * @param {string} hostname
  * @returns {string[]}
  */
 function hostnameVariants(hostname) {
-    const h = hostname.toLowerCase();
+    const h = hostname.toLowerCase().replace(/\.$/, "");
     const variants = [h];
     const parts = h.split(".");
     // Parent domains: a.b.c.d -> b.c.d, c.d

src/shared/uniswap.js

@@ -53,6 +53,11 @@ function formatAmount(raw, decimals) {
 // on a scale — not as a token name, and not as a quantity.
 const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";
 
+// The same refusal when a V4 swap action could not be read (see
+// decodeExactly()). That action names both of its currencies, so saying the
+// calldata did not name one would be false.
+const UNDECODED_CURRENCY = "Unknown (could not be decoded)";
+
 // Explicit presence, never truthiness. Every gate in this file that guards a
 // decoded value goes through here: an address is never falsy once set, but an
 // amount of 0n is, and a gate that cannot tell a genuine zero from an absent
@@ -295,6 +300,24 @@ function v4ExactInAmount(raw) {
     return raw === 0n ? OPEN_DELTA : raw;
 }
 
+// The V4 swap actions are read only in the parameter structs V4Router has
+// deployed on mainnet and Sepolia. v4-periphery `main` has since added a
+// `minHopPriceX36` field to all four (`src/interfaces/IV4Router.sol`), and
+// reading a shape nobody has deployed would be guessing. ethers alone would
+// read the newer structs anyway: it takes whatever word sits where a
+// deployed field would be, ignores bytes left over, and holds back an error
+// in a field until that field is used. The newer multi-hop exact-in struct
+// then yields the offset of its hop-price array as `amountIn`. So a decode
+// counts only when encoding the result again gives back the same bytes;
+// otherwise this throws, and decodeV4Swap() marks the step as not decoded.
+function decodeExactly(types, data) {
+    const decoded = coder.decode(types, data);
+    if (coder.encode(types, decoded) !== data) {
+        throw new Error("Not in the deployed V4 parameter shape.");
+    }
+    return decoded;
+}
+
 // Decode V4_SWAP (command 0x10) input bytes.
 // The input is ABI-encoded as (bytes actions, bytes[] params).
 // We extract token addresses from SETTLE (input) and TAKE (output) sub-actions,
@@ -309,6 +332,10 @@ function decodeV4Swap(input) {
         let takeToken = null;
         let amountIn = null;
         let amountOutMin = null;
+        // Set when a swap action's parameters are not in the deployed shape
+        // (see decodeExactly()), so nothing was read from that action. SETTLE
+        // and TAKE may still name both currencies.
+        let swapUndecoded = false;
 
         for (let i = 0; i < actions.length; i++) {
             const actionId = actions[i];
@@ -337,7 +364,7 @@ function decodeV4Swap(input) {
                         //   tuple(address,uint24,int24,address,bytes)[] path,
                         //   uint128 amountIn, uint128 amountOutMin)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -355,13 +382,13 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through — SETTLE/TAKE will provide tokens
+                            swapUndecoded = true;
                         }
                     } else {
                         // ExactInputSingleParams: (tuple(address,address,uint24,int24,address) poolKey,
                         //   bool zeroForOne, uint128 amountIn, uint128 amountOutMin, bytes hookData)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -384,7 +411,7 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 } else if (
@@ -393,7 +420,7 @@ function decodeV4Swap(input) {
                 ) {
                     if (actionId === V4_SWAP_EXACT_OUT) {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -405,11 +432,11 @@ function decodeV4Swap(input) {
                                 settleToken = path[path.length - 1][0];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     } else {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -426,7 +453,7 @@ function decodeV4Swap(input) {
                                     ? poolKey[1]
                                     : poolKey[0];
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 }
@@ -440,6 +467,7 @@ function decodeV4Swap(input) {
             tokenOut: takeToken,
             amountIn,
             amountOutMin,
+            swapUndecoded,
         };
     } catch {
         return null;
@@ -465,6 +493,7 @@ function decode(data, toAddress, sources) {
         let minOutput = null;
         let hasUnwrapWeth = false;
         let hasV2ExactOut = false;
+        let swapUndecoded = false;
         const commandNames = [];
 
         // THE INVARIANT: an amount and the token it is counted in always come
@@ -568,6 +597,12 @@ function decode(data, toAddress, sources) {
                 if (cmdId === 0x10) {
                     const v4 = decodeV4Swap(inputs[i]);
                     if (v4) {
+                        // Without this, a swap action that went unread would
+                        // look like one that had nothing to show.
+                        if (v4.swapUndecoded) {
+                            swapUndecoded = true;
+                            commandNames[i] += " (could not be decoded)";
+                        }
                         setInputOnce(v4.tokenIn, v4.amountIn);
                         // Always update output: last swap step wins. A step
                         // that carries the Min. received figure but decoded no
@@ -591,12 +626,13 @@ function decode(data, toAddress, sources) {
             }
         }
 
-        // Resolve token info. A null token on either side means the calldata
-        // named no currency for it; tokenInfo() refuses rather than calling it
-        // ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
-        // when the output side is WETH, or when no step set the output side.
-        // Any other output keeps its own token and figure: a swap that buys
-        // USDC and then unwraps the WETH it did not spend receives USDC.
+        // Resolve token info. A null token on either side means no step that
+        // was read named a currency for it; tokenInfo() refuses rather than
+        // calling it ETH. UNWRAP_WETH turns WETH into ETH, so it makes the
+        // output ETH when the output side is WETH, or when no step set the
+        // output side. Any other output keeps its own token and figure: a swap
+        // that buys USDC and then unwraps the WETH it did not spend receives
+        // USDC.
         const outputIsWeth =
             present(outputToken) &&
             WETH_ADDRESSES.includes(outputToken.toLowerCase());
@@ -640,7 +676,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default. Same
             // wording as the Token Out refusal below: the two sides of this
             // screen must not describe the same condition in two ways.
-            details.push({ label: "Token In", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token In",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(inputAmount)) {
@@ -703,7 +742,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default, and a
             // Min. received figure below it is never attached to a token the
             // calldata did not state.
-            details.push({ label: "Token Out", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token Out",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(minOutput)) {

tests/backgroundApproval.test.js

@@ -397,7 +397,13 @@ function loadBackground(options) {
                 rpcResult = r;
             },
         );
-        return { result: () => rpcResult };
+        return {
+            id: () =>
+                new URL(created[created.length - 1].url).searchParams.get(
+                    "approval",
+                ),
+            result: () => rpcResult,
+        };
     }
 
     // A dApp asking to connect. The origin defaults to one the persisted
@@ -1484,6 +1490,55 @@ describe("what the approval is verified against", () => {
         });
     });
 
+    // Typed data whose domain names another chain is refused on the sign
+    // screen; a signature for it that reaches the background anyway is not
+    // handed to the page (https://git.eeqj.de/sneak/AutistMask/issues/519).
+    // TYPED_DATA names mainnet.
+    async function answerTypedData(bg, pending) {
+        const { domain, types, message } = JSON.parse(TYPED_DATA);
+        delete types.EIP712Domain;
+        const signature = await signer.signTypedData(domain, types, message);
+        const answer = bg.send(
+            {
+                type: "AUTISTMASK_SIGN_RESPONSE",
+                id: pending.id(),
+                approved: true,
+                signature,
+            },
+            { url: bg.fromPopup.url },
+        );
+        await settle();
+        return { answer, signature };
+    }
+
+    test("typed data for the active chain is handed back signed", async () => {
+        const bg = loadBackground();
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer, signature } = await answerTypedData(bg, pending);
+
+        expect(answer.sendResponse).toHaveBeenCalledWith({ signature });
+        expect(pending.result()).toEqual({ result: signature });
+    });
+
+    test("typed data for another chain is refused, not handed back", async () => {
+        const bg = loadBackground();
+        bg.setNetwork(SEPOLIA);
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer } = await answerTypedData(bg, pending);
+
+        const refusal =
+            "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+        expect(answer.sendResponse).toHaveBeenCalledWith({
+            error: refusal,
+            retryable: false,
+        });
+        expect(pending.result()).toEqual({ error: { message: refusal } });
+    });
+
     test("a sign request from another address raises no approval at all", async () => {
         const bg = loadBackground();
         const pending = bg.requestSign(other.address);

tests/chainSwitchGate.test.js

@@ -16,7 +16,9 @@
 //
 // The endpoint half of #308 lives in tests/networkEndpoints.test.js, which
 // covers the popup's chain switch; this file covers the background's, which
-// goes through storage rather than the shared state singleton.
+// goes through storage rather than the shared state singleton. The last block
+// covers what the background tells open tabs when the user switches the
+// network in Settings.
 
 const { networkById } = require("../src/shared/networks");
 const { makeStorageStub } = require("./support/storageStub");
@@ -225,6 +227,14 @@ function loadBackground() {
         answerPrompt,
         closePrompt,
         opened,
+        // A message to the background from `sender`, and its answer.
+        send: (msg, sender) => {
+            let reply = null;
+            messageListener(msg, sender, (r) => {
+                reply = r;
+            });
+            return reply;
+        },
         walletState: () => storage.read("autistmask"),
         chainChangedEvents: () =>
             toTabs.filter((m) => m.eventName === "chainChanged"),
@@ -390,3 +400,109 @@ describe("only the user switches the network", () => {
         expect(bg.walletState().rpcUrl).toBe(CUSTOM_RPC);
     });
 });
+
+// Switching the network in Settings tells open pages, as an approved site
+// request does (https://git.eeqj.de/sneak/AutistMask/issues/500). These drive
+// the real Settings view over the background's storage, with what it sends
+// delivered to the background from the extension's own page.
+describe("switching the network in Settings tells every open tab", () => {
+    const POPUP = { url: EXT_URL + "src/popup/index.html" };
+
+    // A stand-in for one DOM node: enough of an element for init() to set
+    // properties on it and hang listeners off it.
+    function fakeElement() {
+        return {
+            value: "",
+            checked: false,
+            textContent: "",
+            style: {},
+            dataset: {},
+            classList: { add() {}, remove() {} },
+            listeners: {},
+            addEventListener(event, handler) {
+                this.listeners[event] = handler;
+            },
+            querySelectorAll: () => [],
+        };
+    }
+
+    // Settings, opened the way the popup opens it. Returns its network
+    // selector.
+    async function openSettings(bg) {
+        const elements = {};
+        const element = (id) => (elements[id] ||= fakeElement());
+        jest.doMock("../src/popup/views/helpers", () => ({
+            $: element,
+            showView: () => {},
+            updateDebugBanner: () => {},
+            showFlash: () => {},
+            escapeHtml: (s) => s,
+            flashCopyFeedback: () => {},
+            goBack: () => {},
+            pushCurrentView: () => {},
+            onViewLeave: () => {},
+            VIEWS: [],
+        }));
+        global.chrome.runtime.sendMessage = (msg) => {
+            bg.send(msg, POPUP);
+        };
+        await require("../src/shared/state").loadState();
+        require("../src/popup/views/settings").init({
+            pageClosed: new AbortController().signal,
+        });
+        const select = element("settings-network");
+        select.value = "mainnet";
+        return select;
+    }
+
+    // The user picks `networkId` in the selector.
+    async function choose(select, networkId) {
+        select.value = networkId;
+        await select.listeners.change();
+        await settle();
+    }
+
+    afterEach(() => {
+        jest.dontMock("../src/popup/views/helpers");
+    });
+
+    test("switching to the other network sends chainChanged once, with its chain id", async () => {
+        const bg = loadBackground();
+        const select = await openSettings(bg);
+
+        await choose(select, "sepolia");
+
+        expect(bg.walletState().networkId).toBe("sepolia");
+        expect(bg.chainChangedEvents()).toEqual([
+            {
+                type: "AUTISTMASK_EVENT",
+                eventName: "chainChanged",
+                data: SEPOLIA.chainId,
+            },
+        ]);
+    });
+
+    test("choosing the network already active changes nothing and sends nothing", async () => {
+        const bg = loadBackground();
+        const select = await openSettings(bg);
+        const before = bg.walletState();
+
+        await choose(select, "mainnet");
+
+        expect(bg.walletState()).toEqual(before);
+        expect(bg.chainChangedEvents()).toEqual([]);
+    });
+
+    test("a page cannot make the background send chainChanged", async () => {
+        const bg = loadBackground();
+
+        const reply = bg.send(
+            { type: "AUTISTMASK_NETWORK_CHANGED", chainId: SEPOLIA.chainId },
+            { url: CONNECTED_ORIGIN + "/" },
+        );
+        await settle();
+
+        expect(reply).toEqual({ error: "Unauthorized sender" });
+        expect(bg.chainChangedEvents()).toEqual([]);
+    });
+});

tests/e2e/firefox/driver.js

@@ -290,6 +290,7 @@ class Driver {
             `const el = document.querySelector(arguments[0]);
              if (document.readyState !== "complete" || !el) return false;
              if (el.closest(".hidden")) return false;
+             if (getComputedStyle(el).visibility !== "visible") return false;
              const r = el.getBoundingClientRect();
              return r.width > 0 && r.height > 0;`,
             [selector],

tests/e2e/firefox/run.js

@@ -128,6 +128,18 @@ step("the popup is drawn in the monospace font it declares", async (env) => {
     );
 });
 
+// The same check as the Chrome suite's (#456), so both browsers are held to
+// the same size.
+step("the popup's text is drawn at the 14px text-sm declares", async (env) => {
+    const size = await env.driver.execute(
+        "return getComputedStyle(document.body).fontSize;",
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The recovery screen (#361): the Chrome suite's four cases, run before any
 // wallet exists for the same reason. With no wallet nothing saves on a timer,
 // so no save can write a good record over the unreadable one. The last of them

tests/e2e/harness.js

@@ -348,6 +348,7 @@ async function visible(page, selector, timeout = 15000) {
                 const el = document.querySelector(sel);
                 if (document.readyState !== "complete" || !el) return false;
                 if (el.closest(".hidden")) return false;
+                if (getComputedStyle(el).visibility !== "visible") return false;
                 const r = el.getBoundingClientRect();
                 return r.width > 0 && r.height > 0;
             },

tests/e2e/run.js

@@ -113,6 +113,18 @@ test("the popup is drawn in the monospace font it declares (#418)", async (env)
     );
 });
 
+// The same stylesheet sets the size on body to 75%, which would draw the
+// popup at 12px.
+test("the popup's text is drawn at the 14px text-sm declares (#456)", async (env) => {
+    const size = await env.page.evaluate(
+        () => getComputedStyle(document.body).fontSize,
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The empirical half of #182. The manifest change is only a claim about
 // what the CSP permits; this is the observation. Two things have to hold
 // together, and the run covers both: the popup realm compiles WASM (here),
@@ -4538,6 +4550,42 @@ test("a site's network switch changes nothing until the user approves it (#408)"
     );
 });
 
+// Switching the network in Settings tells the page too, as an approved site
+// request does (https://git.eeqj.de/sneak/AutistMask/issues/500). The wallet
+// goes back to mainnet the same way at the end.
+test("a network switch in Settings tells the page (#500)", async (env) => {
+    const { mainnet, sepolia } = NETWORKS;
+    const before = await storedNetwork(env.page);
+    assert(
+        before.networkId === "mainnet",
+        "this test starts on mainnet, not on " + before.networkId,
+    );
+    const eventsBefore = (await chainChangedEvents(env.dapp)).length;
+    await openSettings(env.page);
+
+    await env.page.selectOption("#settings-network", "sepolia");
+    let events = await chainChangedEvents(env.dapp, eventsBefore + 1);
+    assert(
+        events.length === eventsBefore + 1 &&
+            events[events.length - 1].data === sepolia.chainId,
+        "the page was not told of the switch to Sepolia: " +
+            JSON.stringify(events),
+    );
+
+    await env.page.selectOption("#settings-network", "mainnet");
+    events = await chainChangedEvents(env.dapp, eventsBefore + 2);
+    assert(
+        events.length === eventsBefore + 2 &&
+            events[events.length - 1].data === mainnet.chainId,
+        "the page was not told of the switch back to mainnet: " +
+            JSON.stringify(events),
+    );
+    assert(
+        isDeepStrictEqual(await storedNetwork(env.page), before),
+        "switching back did not restore the mainnet network and endpoints",
+    );
+});
+
 // The closing pass over both boundaries at once. Every message the section
 // put on either channel is re-read here and required to be free of the
 // password — and required to be there at all, method by method, so the

tests/phishingDomains.test.js

@@ -89,6 +89,12 @@ describe("vendored blocklist", () => {
         expect(isPhishingDomain(LISTED[0].toUpperCase())).toBe(true);
     });
 
+    test("a hostname ending in a dot is the same host", () => {
+        expect(isPhishingDomain(LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain("wallet." + LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain(CLEAN[0] + ".")).toBe(false);
+    });
+
     test("returns false for an empty or missing hostname", () => {
         expect(isPhishingDomain("")).toBe(false);
         expect(isPhishingDomain(null)).toBe(false);
@@ -133,6 +139,13 @@ describe("hostnameVariants", () => {
     test("lowercases hostnames", () => {
         expect(hostnameVariants("Evil.COM")).toEqual(["evil.com"]);
     });
+
+    test("drops the trailing dot of a fully qualified hostname", () => {
+        expect(hostnameVariants("sub.evil.com.")).toEqual([
+            "sub.evil.com",
+            "evil.com",
+        ]);
+    });
 });
 
 describe("domain hashing", () => {

tests/typedDataPermit.test.js

@@ -240,6 +240,7 @@ function request(data) {
 beforeEach(() => {
     state.trackedTokens = [];
     state.wallets = [];
+    state.networkId = "mainnet";
 });
 
 describe("a token permission is warned about, naming spender and amount", () => {
@@ -532,3 +533,66 @@ describe("the sign screen refuses a mismatched primary type", () => {
         expect(node("btn-approve-sign").disabled).toBe(true);
     });
 });
+
+// EIP-712: a wallet refuses typed data whose domain names a chain other than
+// the active one, because the signature is valid on the chain it names
+// (https://git.eeqj.de/sneak/AutistMask/issues/519). The wallet is on Sepolia
+// and the site asks for a mainnet USDC Permit.
+describe("the sign screen refuses typed data for another chain", () => {
+    const REFUSAL =
+        "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+
+    function withChainId(chainId) {
+        return { ...PERMIT, domain: { ...PERMIT.domain, chainId } };
+    }
+
+    beforeEach(() => {
+        decryptWithPassword.mockClear();
+        state.networkId = "sepolia";
+    });
+
+    test("another chain shows the error, with Sign disabled", async () => {
+        await openSignScreen(PERMIT);
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+        expect(node("btn-approve-sign").disabled).toBe(true);
+    });
+
+    test("Sign clicked anyway decrypts and signs nothing", async () => {
+        const sent = await openSignScreen(PERMIT);
+        node("approve-sign-password").value = "any password";
+        await click("btn-approve-sign");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(sent.map((msg) => msg.type)).not.toContain(
+            "AUTISTMASK_SIGN_RESPONSE",
+        );
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+    });
+
+    // ethers signs 1, "1" and "0x1" as the same chain id.
+    test("the chain id is refused in each form ethers signs", () => {
+        for (const chainId of [1, "1", "0x1"]) {
+            expect(typedDataRefusal(request(withChainId(chainId)))).toBe(
+                REFUSAL,
+            );
+        }
+    });
+
+    test("a chain id that is not a number is refused", () => {
+        expect(typedDataRefusal(request(withChainId("mainnet")))).toBe(
+            "This typed data cannot be read, so it cannot be signed.",
+        );
+    });
+
+    test("the active chain leaves Sign enabled", async () => {
+        await openSignScreen(withChainId("0xaa36a7"));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+
+    test("no chain id leaves Sign enabled", async () => {
+        await openSignScreen(withChainId(undefined));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+});

tests/uniswap.test.js

@@ -163,6 +163,110 @@ function encodeV4ExactInSingle(currency0, currency1, amountIn, amountOutMin) {
     );
 }
 
+// Each V4 swap action's parameters in two shapes: the struct V4Router has
+// deployed on mainnet and Sepolia, and the one v4-periphery `main` has since
+// moved to, which adds a `minHopPriceX36` field. Each swaps WETH for USDC.
+const POOL_KEY = "tuple(address,address,uint24,int24,address)";
+const PATH_KEY = "tuple(address,uint24,int24,address,bytes)";
+const WETH_USDC_POOL = [WETH_ADDR, USDC_ADDR, 100, 1, ZERO_ADDR];
+const ONE_WETH = 1000000000000000000n;
+const V4_SWAP_ACTION_SHAPES = [
+    {
+        action: "SWAP_EXACT_IN_SINGLE",
+        id: 0x06,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_IN",
+        id: 0x07,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT_SINGLE",
+        id: 0x08,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT",
+        id: 0x09,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+    },
+];
+
+// Helper: execute() with one V4_SWAP step holding the swap action, then
+// SETTLE of WETH and TAKE of USDC.
+function v4SwapCalldata(actionId, swapParams) {
+    return buildExecute(
+        "0x10",
+        [
+            encodeV4Swap(new Uint8Array([actionId, V4_SETTLE_ID, V4_TAKE_ID]), [
+                swapParams,
+                encodeV4Settle(WETH_ADDR),
+                encodeV4Take(USDC_ADDR),
+            ]),
+        ],
+        9999999999n,
+    );
+}
+
 function detail(result, label) {
     return result.details.find((d) => d.label === label);
 }
@@ -203,11 +307,83 @@ describe("uniswap decoder", () => {
             result.details.find((d) => d.label === "Min. received").value,
         ).toBe("0.0002 ETH");
 
+        // Real mainnet calldata is in the deployed shape, so its V4 step is
+        // not said to be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
-        expect(steps.value).toContain("Permit2 Permit");
-        expect(steps.value).toContain("V4 Swap");
+        expect(steps.value).toBe("Permit2 Permit → V4 Swap");
     });
 
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the deployed shape is read",
+        ({ id, deployed }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, deployed),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Steps").value).toBe("V4 Swap");
+        },
+    );
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/358 — before it, all four
+    // newer structs decoded as the deployed ones without an error, and the
+    // newer SWAP_EXACT_IN showed the offset of its hop-price array as Amount
+    // ("0.0000000000000004 WETH") and its amountIn as Min. received.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer periphery shape is shown as not decoded",
+        ({ id, newer }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, newer),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Amount")).toBeUndefined();
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            // SETTLE and TAKE keep their own shape and still name both sides.
+            expect(detail(result, "Token In").address).toBe(WETH_ADDR);
+            expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
+        },
+    );
+
+    // The decoder does not read SETTLE_ALL or TAKE_ALL, so here only the
+    // unread swap action names the currencies. The token lines must not say
+    // the calldata did not name them.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer shape, then SETTLE_ALL and TAKE_ALL, says both tokens could not be decoded",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                "0x10",
+                [
+                    // 0x0c is SETTLE_ALL (currency, maxAmount), 0x0f is
+                    // TAKE_ALL (currency, minAmount).
+                    encodeV4Swap(new Uint8Array([id, 0x0c, 0x0f]), [
+                        newer,
+                        coder.encode(
+                            ["address", "uint256"],
+                            [WETH_ADDR, ONE_WETH],
+                        ),
+                        coder.encode(
+                            ["address", "uint256"],
+                            [USDC_ADDR, 990000n],
+                        ),
+                    ]),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            expect(detail(result, "Token In").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Token Out").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+        },
+    );
+
     test("decodes V2_SWAP_EXACT_IN with known tokens", () => {
         const data = buildExecute(
             "0x08", // V2_SWAP_EXACT_IN
@@ -548,9 +724,11 @@ describe("uniswap decoder", () => {
         const result = uniswap.decode(data, ROUTER_ADDR);
         expect(result).not.toBeNull();
 
+        // The V4 swap action's parameters are empty, so that step is said to
+        // be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
         expect(steps.value).toBe(
-            "Permit2 Permit \u2192 V4 Swap \u2192 Unwrap WETH",
+            "Permit2 Permit \u2192 V4 Swap (could not be decoded) \u2192 Unwrap WETH",
         );
     });
 

tests/uniswapUndeterminedTokenIn.test.js

@@ -97,7 +97,11 @@ describe("an execute() whose input currency never decoded", () => {
         ]);
 
     test("says the input token is unknown instead of naming ETH", () => {
-        expect(detail(data(), "Token In").value).toBe(REFUSAL);
+        // The swap action that would name it could not be read, so the line
+        // says that rather than REFUSAL's "not named in the calldata".
+        expect(detail(data(), "Token In").value).toBe(
+            "Unknown (could not be decoded)",
+        );
     });
 
     test("keeps a Token In line, so the screen never omits what is paid", () => {