fix: a popup reload mid-refresh no longer logs the requests it cancels (closes #218)

Chrome cancels a closing popup's open requests just after pagehide, and in
the page a cancelled fetch() fails with the same "Failed to fetch" as a
server that cannot be reached. The home screen's transaction list and the
balance refresh logged an error for each, and the e2e suite failed on them.

The popup now aborts an AbortController on pagehide, and those failure
reports check its signal first. End-to-end tests reload the popup with
Blockscout held and require nothing logged, and fail the transaction list
for real and require the failure reported; a unit test covers the balance
refresh. The address and token screens and the new-wallet address scan are
#475.

Model: opus-5-5

.gitea/workflows/check.yml

@@ -3,6 +3,9 @@ on: [push]
 jobs:
     check:
         runs-on: ubuntu-latest
+        # Bounds script/cibuild, a cold-cache build included, so a hang frees
+        # the shared runner. README.md "In CI" has the measured times.
+        timeout-minutes: 10
         steps:
             # actions/checkout v4.2.2, 2026-02-22
             - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683

.gitea/workflows/e2e.yml

@@ -35,6 +35,10 @@ on: [push]
 jobs:
     e2e-chrome:
         runs-on: ubuntu-latest
+        # Bounds the image build, a cold cache included, and both Chrome
+        # programs, so a hung browser frees the shared runner. README.md
+        # "In CI" has the measured times.
+        timeout-minutes: 20
         steps:
             # actions/checkout v4.2.2, 2026-02-22
             - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
@@ -42,6 +46,10 @@ jobs:
 
     e2e-firefox:
         runs-on: ubuntu-latest
+        # Bounds the image build, a cold cache included, and both Firefox
+        # programs, so a hung browser frees the shared runner. README.md
+        # "In CI" has the measured times.
+        timeout-minutes: 15
         steps:
             # actions/checkout v4.2.2, 2026-02-22
             - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683

.prettierignore

@@ -2,4 +2,3 @@ node_modules/
 yarn.lock
 dist/
 release/
-.claude/

Makefile

@@ -107,6 +107,14 @@ vendor-blocklist:
 clean:
 	@rm -rf dist/ release/
 
+# Run the build make build runs, without the checks that follow it, then run it
+# again after every change to a file under src/, manifest/ or icons/, until
+# interrupted. A failed build is reported, may leave dist/ partly written, and
+# watching carries on. It writes no build receipt, so nothing can verify what it
+# leaves in dist/: anything handed on comes from make build. A release build
+# unless AUTISTMASK_DEBUG=1 is exported. A change anywhere else, package.json
+# and build.js included, starts no build, and a directory created while it runs
+# is not watched; restart it after either.
 dev:
 	@echo "Building in watch mode..."
 	@yarn run build --watch 2>&1

README.md

@@ -306,7 +306,15 @@ The Makefile shims to those. It also carries a few targets that have no
   debug build, and keeping its `dist/` on failure (see
   [Debug Builds](#debug-builds))
 - `make clean` — remove `dist/` and `release/`
-- `make dev` — build in watch mode
+- `make dev` — run the build `make build` runs, without the checks that follow
+  it, then run it again after every change to a file under `src/`, `manifest/`
+  or `icons/`, until interrupted. A failed build is reported, may leave `dist/`
+  partly written, and watching carries on. It writes no build receipt, so
+  nothing can verify what it leaves in `dist/` (see
+  [Build Receipts](#build-receipts)): anything handed on comes from
+  `make build`. A release build unless `AUTISTMASK_DEBUG=1` is exported. A
+  change anywhere else, `package.json` and `build.js` included, starts no build,
+  and a directory created while it runs is not watched; restart it after either
 
 ## End-to-End Tests
 
@@ -342,6 +350,11 @@ fixtures in `tests/e2e/network.js`, so the run is deterministic and fully
 offline; unrecognised outbound requests are reported as failures rather than
 silently allowed.
 
+It also covers the StateRecovery screen, under the shipped CSP: a stored record
+this build cannot read opens the popup on it, its export text box holds that
+record exactly as stored, a near-miss confirmation phrase erases nothing, and
+the exact one erases the record and reloads into Welcome.
+
 It also covers the **Settings screen**, which holds the densest run of element
 id lookups in the codebase and where one wrong id leaves the whole popup blank
 rather than only degrading Settings: that the screen renders populated — the
@@ -371,6 +384,12 @@ reserve while sitting on the same side of the estimate, so swapping the two in
 what [#154](https://git.eeqj.de/sneak/AutistMask/issues/154) was, and it was
 previously correct by reading only.
 
+It also covers both ways the wait for a sent transaction's receipt ends on the
+error screen: lookups that still find no receipt 60 seconds after the broadcast,
+and six lookups in a row that fail. Each must show its own message, and Done
+must lead back to the address screen. Both wait in real time, about a minute
+each.
+
 It also covers the **dApp approval round trips** — the one place where the
 content script, the inpage provider, the background worker and the approval
 popup all have to work together. A local test page is served by the route
@@ -464,10 +483,11 @@ Chrome that ever changes this fails the run instead of passing it.
 
 `make test-e2e-firefox` builds `dist/firefox/` and drives the **real popup in a
 real Firefox**, installed as an unpacked MV2 temporary add-on via geckodriver.
-It covers popup load, wallet creation through the UI, the Add Token screen, and
+It covers popup load, the StateRecovery screen (the same cases as the Chrome
-the four dApp round trips — `eth_requestAccounts`, `personal_sign`,
+suite), wallet creation through the UI, the Add Token screen, and the four dApp
-`eth_sendTransaction`, and a closed approval window rejecting with EIP-1193 4001
+round trips — `eth_requestAccounts`, `personal_sign`, `eth_sendTransaction`, and
-— driven through the real content script, background page and approval windows.
+a closed approval window rejecting with EIP-1193 4001 — driven through the real
+content script, background page and approval windows.
 
 The suite lives in `tests/e2e/firefox/`. Its WebDriver client (`driver.js`) has
 **no npm dependencies at all**: it is built on global `fetch` and
@@ -631,10 +651,20 @@ Nothing in either job can pass vacuously. There is no `continue-on-error` and no
 build fails, and when the browser fails to start; the Chrome harness aborts the
 suite outright if its network interception is not in effect.
 
-Measured on this repo's runner: `e2e-chrome` about 1m55s cold, almost all of it
+Measured on this repo's runner in the green runs of early October 2026, from a
-the one-time pull of the pinned ~800MB Playwright layer, and well under a minute
+warm docker cache to a cold one: `check` 49s to 3m37s, `e2e-chrome` 1m44s to
-once that layer is cached. `e2e-firefox` about 1m05s cold, and it caches its
+4m48s, and `e2e-firefox` 31s to 4m07s. A cold cache adds three to four minutes
-Firefox and geckodriver downloads the same way.
+to each job, spent rebuilding its image: reinstalling dependencies and, for
+`e2e-firefox`, installing Firefox, geckodriver and their system libraries. Those
+`e2e-chrome` runs predate the cases that wait in real time for a receipt to end
+in error. `make test-e2e` now takes 3m51s locally with its image cached, so a
+cold `e2e-chrome` run comes to about seven minutes.
+
+Every job has a `timeout-minutes` cap, so a hung build or browser ends the job
+instead of holding the shared runner: `check` 10 minutes, `e2e-firefox` 15 and
+`e2e-chrome` 20, each over two and a half times the job's slowest cold run. A
+job that reaches its cap has hung; read it as a hang, not as a slow run to
+retry.
 
 ### Element id guard (part of `make check`)
 
@@ -800,13 +830,15 @@ discoverable.
   on critical screens and when space is available to allow users to disambiguate
   addresses visually, as a security feature.
 - **Tailwind CSS**: Utility-first CSS via Tailwind. No custom CSS classes for
-  styling. Tailwind is configured with a minimal monochrome palette. This keeps
+  styling, and no `style="..."` attributes, which the
-  the styling co-located with the markup and eliminates CSS file management. The
+  [Content Security Policy](#content-security-policy) refuses. Tailwind is
-  handful of classes in `styles/main.css` are not styling: `.copy-flash-*`
+  configured with a minimal monochrome palette. This keeps the styling
-  carries the copy feedback animation, and `.am-address` carries the rule that
+  co-located with the markup and eliminates CSS file management. The handful of
-  an address never wraps. Both are invariants that hold in every place they
+  classes in `styles/main.css` are not styling: `.copy-flash-*` carries the copy
-  appear, and spelling either out as repeated utilities is how one of those
+  feedback animation, and `.am-address` carries the rule that an address never
-  places drifts away from the rest.
+  wraps. Both are invariants that hold in every place they appear, and spelling
+  either out as repeated utilities is how one of those places drifts away from
+  the rest.
 - **Vanilla JS**: No framework (React, Vue, Svelte, etc.). The popup UI is small
   enough that vanilla JS with simple view switching is sufficient. A framework
   would add bundle size, build complexity, and attack surface for no benefit at
@@ -2174,8 +2206,8 @@ Dev dependencies (not shipped in extension):
 | Package            | Version | License | Purpose                   |
 | ------------------ | ------- | ------- | ------------------------- |
 | `esbuild`          | 0.27.3  | MIT     | JS bundler (inlines deps) |
-| `tailwindcss`      | 4.2.1   | MIT     | CSS compilation           |
+| `tailwindcss`      | 4.3.1   | MIT     | CSS compilation           |
-| `@tailwindcss/cli` | 4.2.1   | MIT     | Tailwind CLI              |
+| `@tailwindcss/cli` | 4.3.1   | MIT     | Tailwind CLI              |
 | `jest`             | 30.2.0  | MIT     | Test runner               |
 | `prettier`         | 3.8.1   | MIT     | Code formatter            |
 
@@ -2199,7 +2231,7 @@ a bare string in `manifest/firefox.json` (MV2):
 
 ```
 default-src 'self'; script-src 'self' 'wasm-unsafe-eval'; object-src 'self';
-style-src 'self' 'unsafe-inline'; img-src 'self' data:;
+style-src 'self'; img-src 'self' data:;
 connect-src 'self' https: http:; frame-src 'none'; form-action 'none';
 base-uri 'none'
 ```
@@ -2211,15 +2243,17 @@ wallet's own UI. Escaping is the primary fix for that (see
 `src/shared/html.js`); this is the second line, so an escape that does slip
 cannot reach the network.
 
-Four directives are looser than `'self'`, each for a reason that does not
+`style-src 'self'` admits the stylesheet and nothing inline: both browsers
+refuse a `style="..."` attribute and a `<style>` block. So the popup's markup,
+in `src/popup/index.html` and in the HTML the view helpers build, carries
+Tailwind classes and never a `style` attribute. Script that sets `element.style`
+is not affected; that is how the views show and hide their error lines. An
+inline style that slips in anyway is refused with a console error, which fails
+both end-to-end suites.
+
+These directives differ from a plain `'self'`, each for a reason that does not
 generalise:
 
-- `style-src 'unsafe-inline'` — `src/popup/index.html` and the view helpers set
-  presentation through `style="..."` attributes, which CSP blocks without this.
-  Chrome enforces `style-src` on attributes, not only on `<style>` blocks, and
-  Firefox has never implemented `style-src-attr`, so there is no narrower
-  spelling that works on both targets. It permits inline **style**; script stays
-  under `script-src`, which does not allow `'unsafe-inline'`.
 - `img-src data:` — identicons are generated in the popup by
   `ethereum-blockies-base64` and assigned to `img.src` as `data:` PNGs.
 - `connect-src https: http:` — the RPC endpoint is user-configurable and a local

TODO.md

@@ -45,6 +45,134 @@ but the review is broader than any of them.
 
 # Completed Steps
 
+- 2026-10-06: Reloading or closing the popup mid-refresh no longer logs the
+  requests that cancels as failures
+  ([#218](https://git.eeqj.de/sneak/AutistMask/issues/218)). Chrome cancels a
+  closing page's open requests just after `pagehide`, and in the page a
+  cancelled `fetch()` fails with the same "Failed to fetch" as a server that
+  cannot be reached, so the home screen's transaction list and the balance
+  refresh logged an error for each, and the e2e suite failed on them. The popup
+  now aborts an `AbortController` on `pagehide`, and those two check its signal
+  before reporting a failure. New e2e tests reload the popup with Blockscout
+  held and require nothing logged, and fail the transaction list for real and
+  require the failure reported; `tests/balanceRefreshCancelled.test.js` covers
+  the balance refresh. The address and token screens and the address scan after
+  a new wallet still log a cancelled request
+  ([#475](https://git.eeqj.de/sneak/AutistMask/issues/475)).
+
+- 2026-10-05: `make build` no longer prints the Node `DEP0205`
+  `module.register()` deprecation warning
+  ([#355](https://git.eeqj.de/sneak/AutistMask/issues/355)). The call came from
+  `@tailwindcss/node`, which the Tailwind CLI loads; `tailwindcss` and
+  `@tailwindcss/cli` are now pinned at 4.3.1, the first release that uses
+  `module.registerHooks()` where Node has it. The compiled CSS computes to the
+  same values; it drops the unused `.start` and `.end` rules and writes
+  `calc(var(--spacing) * 1)` as `var(--spacing)` and `calc(var(--spacing) * 0)`
+  as `0`.
+
+- 2026-10-05: `make dev` watches
+  ([#332](https://git.eeqj.de/sneak/AutistMask/issues/332)). It used to pass
+  `--watch` to a `build.js` that read no arguments, so it built once and exited.
+  `build.js --watch` now builds, then builds again after every change to a file
+  under `src/`, `manifest/` or `icons/`; any other argument fails. It watches
+  each directory rather than using Node's recursive watch, which on Linux stops
+  seeing a file an editor saves by renaming a new copy over it. It writes no
+  build receipt, so nothing can verify what it builds; `make build` remains the
+  way to produce a `dist/` to hand on. `tests/buildWatch.test.js` covers the
+  watch loop against a temp directory.
+
+- 2026-10-05: Every CI job has a `timeout-minutes` cap
+  ([#294](https://git.eeqj.de/sneak/AutistMask/issues/294)): `check` 10 minutes,
+  `e2e-firefox` 15 and `e2e-chrome` 20, each over two and a half times the job's
+  slowest cold-cache run. A hung build or browser now ends its job instead of
+  holding the shared runner for hours.
+
+- 2026-10-05: `PROXY_METHODS` in `src/background/index.js` no longer lists
+  `eth_chainId` and `net_version`
+  ([#326](https://git.eeqj.de/sneak/AutistMask/issues/326)). `handleRpc` answers
+  both itself before its proxy branch, so the list named two methods that are
+  never sent to the RPC endpoint. No other entry is answered earlier.
+  `tests/proxyMethods.test.js` sends every listed method from a page and fails
+  on any that does not reach the RPC endpoint.
+
+- 2026-10-05: The popup's Content Security Policy no longer allows inline style
+  ([#328](https://git.eeqj.de/sneak/AutistMask/issues/328)): `style-src` is
+  `'self'` in both manifests, pinned in `tests/manifest.test.js`. The 42
+  `style="..."` attributes in `src/popup/index.html` and in the markup the view
+  helpers build are now Tailwind classes, each computing to the value it
+  replaced. The 16 address dot colours are written out as whole classes, because
+  Tailwind builds only the classes it finds in the source. The Settings debug
+  well is shown and hidden with the `hidden` class, since clearing an inline
+  `display` no longer uncovers it. Script that sets `element.style` is
+  unaffected.
+
+- 2026-10-05: `.prettierignore` no longer lists an AI vendor's tool directory
+  ([#363](https://git.eeqj.de/sneak/AutistMask/issues/363)). The directory is
+  not tracked, so the line ignored nothing.
+
+- 2026-10-05: The Chrome end-to-end suite drives both ways the wait for a
+  transaction's receipt ends on the error screen
+  ([#315](https://git.eeqj.de/sneak/AutistMask/issues/315)): lookups that still
+  find no receipt 60 seconds after the broadcast end it with the timeout
+  message, and six lookups that fail in a row end it with the message naming the
+  unreachable network. Done then returns to the address screen. Both cases wait
+  in real time, about a minute each. Playwright's clock would apply to every
+  later test in the run and cannot be removed, and moving the stored broadcast
+  time back can be undone by the save the popup makes every ten seconds.
+
+- 2026-10-05: The Chrome end-to-end suite covers the last of the
+  [#150](https://git.eeqj.de/sneak/AutistMask/issues/150) and
+  [#151](https://git.eeqj.de/sneak/AutistMask/issues/151) items
+  ([#295](https://git.eeqj.de/sneak/AutistMask/issues/295)): a token added on
+  Add Token by its contract address is listed on the address screen;
+  TransactionDetail opened from the token screen leaves that screen on the
+  persisted navigation stack, and Back returns to it; and the token contract row
+  links to the explorer's token page, read off the link rather than followed.
+  The network stub answers `symbol()` and `name()` for the stub token, which
+  adding it reads.
+
+- 2026-10-05: Each control that leads to a signature or to the private key has a
+  test that it refuses a defective wallet before asking for a password
+  ([#254](https://git.eeqj.de/sneak/AutistMask/issues/254)): Send on the main,
+  address and token screens, Export Private Key, and both approval screens, as
+  drawn and as clicked. Send on the confirmation screen refuses it too now,
+  because the popup reopens onto that screen from a saved view. The comments
+  that said the wallet's key cannot be derived now say that
+  `getSignerForAddress` refuses it, and the module comment in
+  `src/shared/walletDefects.js` names both earlier import paths.
+
+- 2026-10-05: The Chrome end-to-end suite drives the private key export screen
+  as it drives the recovery phrase screen
+  ([#253](https://git.eeqj.de/sneak/AutistMask/issues/253)): the correct
+  password shows the key, leaving by the settings gear empties the screen, and
+  leaving while the password is still being checked never puts the key on it.
+  The cases use the imported key wallet rather than the HD one. Leaving drops
+  the address the screen was showing, and an HD wallet's key cannot be derived
+  without it, so on an HD wallet a late decrypt fails by itself and would never
+  exercise the check that discards it. The screen cannot yet be opened twice in
+  one popup session ([#460](https://git.eeqj.de/sneak/AutistMask/issues/460)),
+  so the cases reopen the popup before the second open.
+
+- 2026-10-05: The StateRecovery screen is driven in a real browser under the
+  shipped CSP, in both end-to-end suites
+  ([#361](https://git.eeqj.de/sneak/AutistMask/issues/361)). A stored record
+  this build cannot read opens the popup on it; its export text box holds the
+  record exactly as stored; a near-miss confirmation phrase erases nothing; and
+  the exact phrase erases the record and reloads into Welcome. The cases run
+  before any wallet exists: with no wallet nothing saves on a timer, so no save
+  can write a good record over the unreadable one, and the erase leaves the
+  popup on Welcome for wallet creation.
+
+- 2026-10-05: Escaping in the popup's views follows its own rule with no
+  exceptions ([#329](https://git.eeqj.de/sneak/AutistMask/issues/329)). The
+  decimals and holder count on a token's screen, and every USD figure (the ETH
+  price, each total and each balance row's value), went into `innerHTML`
+  unescaped; they are escaped now. None could carry markup, but `formatUsd()`
+  writes a value under a cent as `< $0.01`. `displaySymbol()` counts a symbol in
+  code points rather than UTF-16 units, so a cut never splits an emoji into a
+  half that renders as U+FFFD. `explorerLink()`, also named in the issue, was
+  already removed by [#168](https://git.eeqj.de/sneak/AutistMask/issues/168).
+
 - 2026-10-05: A Chrome end-to-end test that fails no longer takes later tests
   down with it ([#318](https://git.eeqj.de/sneak/AutistMask/issues/318)). Each
   test that turns a fixture switch on for itself alone (a held or failing gas

build.js

@@ -15,6 +15,15 @@ const DIST_CHROME = path.join(DIST, "chrome");
 const DIST_FIREFOX = path.join(DIST, "firefox");
 const SRC = path.join(__dirname, "src");
 
+// What `make dev` watches: the directories whose files build() bundles,
+// compiles or copies. A change anywhere else, package.json and build.js
+// included, starts no build; restart make dev after one.
+const WATCHED_DIRS = [
+    SRC,
+    path.join(__dirname, "manifest"),
+    path.join(__dirname, "icons"),
+];
+
 // The module whose compiled DEBUG state script/verify-build asserts. Which
 // bundles contain it is derived from esbuild's own dependency graph rather
 // than from a hardcoded list, so it tracks the bundle layout instead of
@@ -441,6 +450,10 @@ function getBuildInfo() {
 async function build() {
     console.log("Building AutistMask extension...");
 
+    // Under make dev this runs once per rebuild in the same process, and each
+    // build accounts only for what it emits itself.
+    emittedFiles.length = 0;
+
     const receiptPath = receiptTarget();
     if (!receiptPath) {
         console.warn(
@@ -597,27 +610,94 @@ async function build() {
     console.log("Build complete: dist/chrome/ and dist/firefox/");
 }
 
+// make dev: build, then build again after every change under `dirs`, until
+// interrupted. A failed build is reported and watching carries on, so a
+// half-finished edit does not end it. A change that arrives while a build is
+// running is not lost: it causes one more build as soon as that one finishes.
+// A directory created after this starts is not watched until a restart.
+//
+// make dev sets no AUTISTMASK_BUILD_RECEIPT, so these builds write no receipt
+// and nothing can verify what they leave in dist/.
+//
+// `rebuild` is build() everywhere but tests/buildWatch.test.js, which also
+// closes the returned watchers.
+function watch(dirs, rebuild) {
+    let building = false;
+    let changedAgain = false;
+
+    async function run() {
+        if (building) {
+            changedAgain = true;
+            return;
+        }
+        building = true;
+        do {
+            // Let the rest of one save's events arrive first, so that one
+            // save is one build.
+            await new Promise((resolve) => setTimeout(resolve, 100));
+            changedAgain = false;
+            try {
+                await rebuild();
+            } catch (err) {
+                console.error(
+                    `Build failed: ${err && err.message ? err.message : err}`,
+                );
+            }
+        } while (changedAgain);
+        building = false;
+        console.log("Watching for changes (Ctrl-C to stop)...");
+    }
+
+    // One watcher per directory rather than fs.watch's recursive option: on
+    // Linux, Node's recursive watch watches each file, and stops seeing one
+    // that an editor saves by renaming a new copy over it. A directory's
+    // watcher reports every change to the files in it, however they are saved.
+    const subdirectories = dirs.flatMap((dir) =>
+        fs
+            .readdirSync(dir, { recursive: true, withFileTypes: true })
+            .filter((entry) => entry.isDirectory())
+            .map((entry) => path.join(entry.parentPath, entry.name)),
+    );
+    const watchers = [...dirs, ...subdirectories].map((dir) =>
+        fs.watch(dir, run),
+    );
+    run();
+    return watchers;
+}
+
 // Run only as a program. Required as a module — which is how
-// tests/buildForbiddenInputs.test.js reaches the checks below — this file
+// tests/buildForbiddenInputs.test.js and tests/buildWatch.test.js reach the
-// builds nothing and writes nothing.
+// functions below — this file builds nothing and writes nothing.
 if (require.main === module) {
+    const args = process.argv.slice(2);
+    // An argument this file does not know fails rather than being ignored.
+    if (args.length > 1 || (args.length === 1 && args[0] !== "--watch")) {
+        console.error("usage: node build.js [--watch]");
+        process.exit(2);
+    }
+    if (args[0] === "--watch") {
+        watch(WATCHED_DIRS, build);
+    } else {
         build().catch((err) => {
             console.error(
                 `Build failed: ${err && err.message ? err.message : err}`,
             );
             process.exit(1);
         });
+    }
 }
 
-// Exported for tests/buildForbiddenInputs.test.js only. The prohibition these
+// Exported for tests only: watch() for tests/buildWatch.test.js, the rest for
-// three functions enforce is the guarantee behind
+// tests/buildForbiddenInputs.test.js. The prohibition those enforce is the
-// https://git.eeqj.de/sneak/AutistMask/issues/324, and `make check` does not
+// guarantee behind https://git.eeqj.de/sneak/AutistMask/issues/324, and
-// run `make build` — so they are unit tested against synthetic metafiles
+// `make check` does not run `make build` — so they are unit tested against
-// rather than being exercised only by CI, where "it ran" is not "it works".
+// synthetic metafiles rather than being exercised only by CI, where "it ran"
+// is not "it works".
 module.exports = {
     importChain,
     newForbiddenRecord,
     recordBundledInputs,
     assertNoForbiddenInputs,
     assertForbiddenTableCovered,
+    watch,
 };

manifest/chrome.json

@@ -7,7 +7,7 @@
     "permissions": ["storage", "activeTab", "alarms"],
     "host_permissions": ["<all_urls>"],
     "content_security_policy": {
-        "extension_pages": "default-src 'self'; script-src 'self' 'wasm-unsafe-eval'; object-src 'self'; style-src 'self' 'unsafe-inline'; img-src 'self' data:; connect-src 'self' https: http:; frame-src 'none'; form-action 'none'; base-uri 'none'"
+        "extension_pages": "default-src 'self'; script-src 'self' 'wasm-unsafe-eval'; object-src 'self'; style-src 'self'; img-src 'self' data:; connect-src 'self' https: http:; frame-src 'none'; form-action 'none'; base-uri 'none'"
     },
     "icons": {
         "16": "icons/icon16.png",

manifest/firefox.json

@@ -4,7 +4,7 @@
     "version": "0.1.0",
     "description": "Minimal Ethereum wallet for Firefox",
     "permissions": ["storage", "activeTab", "alarms", "<all_urls>"],
-    "content_security_policy": "default-src 'self'; script-src 'self' 'wasm-unsafe-eval'; object-src 'self'; style-src 'self' 'unsafe-inline'; img-src 'self' data:; connect-src 'self' https: http:; frame-src 'none'; form-action 'none'; base-uri 'none'",
+    "content_security_policy": "default-src 'self'; script-src 'self' 'wasm-unsafe-eval'; object-src 'self'; style-src 'self'; img-src 'self' data:; connect-src 'self' https: http:; frame-src 'none'; form-action 'none'; base-uri 'none'",
     "icons": {
         "16": "icons/icon16.png",
         "32": "icons/icon32.png",

package.json

@@ -15,14 +15,14 @@
     },
     "devDependencies": {
         "@eslint/js": "10.0.1",
-        "@tailwindcss/cli": "^4.2.1",
+        "@tailwindcss/cli": "4.3.1",
         "esbuild": "^0.27.3",
         "eslint": "10.8.1",
         "globals": "17.11.0",
         "jest": "^30.2.0",
         "playwright-core": "1.56.0",
         "prettier": "^3.8.1",
-        "tailwindcss": "^4.2.1"
+        "tailwindcss": "4.3.1"
     },
     "dependencies": {
         "ethereum-blockies-base64": "^1.0.2",

src/background/index.js

@@ -741,11 +741,12 @@ async function handleConnectionRequest(origin) {
     }
 }
 
-// Methods that are safe to proxy directly to the RPC node
+// Methods that are safe to proxy directly to the RPC node. A method handleRpc
+// answers before its proxy branch does not belong here: it would never reach
+// the node. tests/proxyMethods.test.js sends every one of these.
 const PROXY_METHODS = [
     "eth_blockNumber",
     "eth_call",
-    "eth_chainId",
     "eth_estimateGas",
     "eth_gasPrice",
     "eth_getBalance",
@@ -759,7 +760,6 @@ const PROXY_METHODS = [
     "eth_getTransactionReceipt",
     "eth_maxPriorityFeePerGas",
     "eth_sendRawTransaction",
-    "net_version",
     "web3_clientVersion",
     "eth_feeHistory",
     "eth_getBlockTransactionCountByHash",
@@ -1802,3 +1802,5 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
         return false;
     }
 });
+
+module.exports = { PROXY_METHODS };

src/popup/index.html

@@ -110,8 +110,7 @@
                     </div>
                     <div
                         id="add-wallet-phrase-warning"
-                        class="text-xs mb-2 border border-border border-dashed p-2"
+                        class="text-xs mb-2 border border-border border-dashed p-2 invisible"
-                        style="visibility: hidden"
                     >
                         Write these words down and keep them safe. Anyone with
                         them can take your funds; if you lose them, your wallet
@@ -262,10 +261,7 @@
 
                 <!-- recent transactions across all addresses -->
                 <div>
-                    <div
+                    <div class="font-bold bg-section py-1 px-2 -mx-2">
-                        class="font-bold bg-section py-1 px-2"
-                        style="margin-left: -0.5rem; margin-right: -0.5rem"
-                    >
                         Recent Transactions
                     </div>
                     <div id="home-tx-list">
@@ -273,7 +269,7 @@
                     </div>
                 </div>
 
-                <div class="py-1" style="margin: 0 -0.5rem">&nbsp;</div>
+                <div class="py-1 -mx-2">&nbsp;</div>
 
                 <div class="text-xs text-muted">
                     <span
@@ -409,8 +405,7 @@
                 </p>
                 <div
                     id="export-privkey-flash"
-                    class="text-xs mb-2 min-h-[1.25rem]"
+                    class="text-xs mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div id="export-privkey-password-section" class="mb-2">
                     <label class="block mb-1">Password</label>
@@ -542,8 +537,7 @@
                     />
                     <div
                         id="send-to-error"
-                        class="text-xs"
+                        class="text-xs min-h-[1.25rem] text-[#cc0000]"
-                        style="min-height: 1.25rem; color: #cc0000"
                     ></div>
                 </div>
                 <div class="mb-2">
@@ -619,7 +613,7 @@
                     <div class="text-xs text-muted mb-1">Your balance</div>
                     <div id="confirm-balance" class="text-xs"></div>
                 </div>
-                <div id="confirm-fee" class="mb-3" style="visibility: hidden">
+                <div id="confirm-fee" class="mb-3 invisible">
                     <div class="text-xs text-muted mb-1">Network fee</div>
                     <div id="confirm-fee-amount" class="text-xs"></div>
                     <!-- Holds its one line of space from the first paint, so
@@ -627,22 +621,13 @@
                     nothing. The placeholder is never seen. -->
                     <div
                         id="confirm-fee-reserve"
-                        class="text-xs text-muted"
+                        class="text-xs text-muted invisible"
-                        style="visibility: hidden"
                     >
                         reserve pending
                     </div>
                 </div>
-                <div
+                <div id="confirm-warnings" class="mb-2 invisible"></div>
-                    id="confirm-warnings"
+                <div id="confirm-recipient-warning" class="mb-2 invisible">
-                    class="mb-2"
-                    style="visibility: hidden"
-                ></div>
-                <div
-                    id="confirm-recipient-warning"
-                    class="mb-2"
-                    style="visibility: hidden"
-                >
                     <div
                         class="border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
                     >
@@ -655,14 +640,9 @@
                 in confirmTx.js sets it. -->
                 <div
                     id="confirm-contract-warning"
-                    class="mb-2 border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
+                    class="mb-2 border border-red-500 border-dashed p-2 text-xs font-bold text-red-500 invisible"
-                    style="visibility: hidden"
                 ></div>
-                <div
+                <div id="confirm-burn-warning" class="mb-2 invisible">
-                    id="confirm-burn-warning"
-                    class="mb-2"
-                    style="visibility: hidden"
-                >
                     <div
                         class="border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
                     >
@@ -670,11 +650,7 @@
                         here are permanently destroyed and cannot be recovered.
                     </div>
                 </div>
-                <div
+                <div id="confirm-etherscan-warning" class="mb-2 invisible">
-                    id="confirm-etherscan-warning"
-                    class="mb-2"
-                    style="visibility: hidden"
-                >
                     <div
                         class="border border-red-500 border-dashed p-2 text-xs font-bold text-red-500"
                     >
@@ -684,13 +660,11 @@
                 </div>
                 <div
                     id="confirm-errors"
-                    class="mb-2 border border-border border-dashed p-2"
+                    class="mb-2 border border-border border-dashed p-2 invisible min-h-[1.25rem]"
-                    style="visibility: hidden; min-height: 1.25rem"
                 ></div>
                 <div
                     id="confirm-amount-fee-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                    style="visibility: hidden"
                 >
                     Your balance does not cover this amount plus the network
                     fee. Please go back and send a smaller amount.
@@ -699,15 +673,13 @@
                 in confirmTx.js sets it. -->
                 <div
                     id="confirm-gas-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                    style="visibility: hidden"
                 ></div>
                 <!-- Its sentence names why the fee could not be estimated,
                 so show() in confirmTx.js sets it. -->
                 <div
                     id="confirm-fee-unknown-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div class="mb-2">
                     <label class="block mb-1 text-xs">Password</label>
@@ -719,8 +691,7 @@
                 </div>
                 <div
                     id="confirm-tx-password-error"
-                    class="text-xs mb-2 min-h-[1.25rem]"
+                    class="text-xs mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <button
                     id="btn-confirm-send"
@@ -835,8 +806,7 @@
                 </button>
                 <div
                     id="receive-erc20-warning"
-                    class="text-xs border border-border border-dashed p-2 mt-3"
+                    class="text-xs border border-border border-dashed p-2 mt-3 invisible"
-                    style="visibility: hidden"
                 ></div>
             </div>
 
@@ -864,8 +834,7 @@
                 </div>
                 <div
                     id="add-token-info"
-                    class="text-xs text-muted mb-2 min-h-[1.25rem]"
+                    class="text-xs text-muted mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div class="mb-2">
                     <label class="block mb-1 text-xs text-muted"
@@ -1051,8 +1020,7 @@
                             type="text"
                             inputmode="numeric"
                             id="settings-dust-threshold"
-                            class="border border-border p-1 text-xs bg-bg text-fg"
+                            class="border border-border p-1 text-xs bg-bg text-fg w-[10ch]"
-                            style="width: 10ch"
                         />
                         <span class="text-xs text-muted">gwei</span>
                     </div>
@@ -1129,8 +1097,7 @@
 
                 <div
                     id="settings-debug-well"
-                    class="bg-well p-3 mx-1 mb-3"
+                    class="bg-well p-3 mx-1 mb-3 hidden"
-                    style="display: none"
                 >
                     <h3 class="font-bold mb-1">Debug</h3>
                     <label
@@ -1158,8 +1125,7 @@
                 </p>
                 <div
                     id="delete-wallet-flash"
-                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div class="mb-2">
                     <label class="block mb-1">Password</label>
@@ -1232,8 +1198,7 @@
                 </div>
                 <div
                     id="delete-wallet-lost-flash"
-                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <button
                     id="btn-delete-wallet-lost-confirm"
@@ -1288,8 +1253,7 @@
                 </p>
                 <div
                     id="delete-address-flash"
-                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <button
                     id="btn-delete-address-confirm"
@@ -1318,8 +1282,7 @@
                 </div>
                 <div
                     id="show-phrase-flash"
-                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div id="show-phrase-password-section" class="mb-2">
                     <label class="block mb-1">Password</label>
@@ -1401,8 +1364,7 @@
                     />
                     <div
                         id="settings-addtoken-info"
-                        class="text-xs text-muted mt-1 min-h-[1.25rem]"
+                        class="text-xs text-muted mt-1 min-h-[1.25rem] invisible"
-                        style="visibility: hidden"
                     ></div>
                     <button
                         id="btn-settings-addtoken-manual"
@@ -1635,8 +1597,7 @@
                 </div>
                 <div
                     id="approve-tx-error"
-                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem]"
+                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div class="flex justify-between">
                     <button
@@ -1672,15 +1633,7 @@
 
                 <div
                     id="approve-sign-danger-warning"
-                    class="mb-3 p-2 text-xs font-bold"
+                    class="mb-3 p-2 text-xs font-bold invisible min-h-[1.25rem] bg-[#fee2e2] text-[#991b1b] border-2 border-[#dc2626] rounded-[6px]"
-                    style="
-                        visibility: hidden;
-                        min-height: 1.25rem;
-                        background: #fee2e2;
-                        color: #991b1b;
-                        border: 2px solid #dc2626;
-                        border-radius: 6px;
-                    "
                 ></div>
 
                 <div class="mb-3">
@@ -1697,8 +1650,7 @@
                     <div class="text-xs text-muted mb-1">Message</div>
                     <div
                         id="approve-sign-message"
-                        class="text-xs break-all"
+                        class="text-xs break-all max-h-48 overflow-y-auto"
-                        style="max-height: 12rem; overflow-y: auto"
                     ></div>
                 </div>
 
@@ -1706,8 +1658,7 @@
                     <div class="text-xs text-muted mb-1">Raw data</div>
                     <div
                         id="approve-sign-hex"
-                        class="text-xs break-all"
+                        class="text-xs break-all max-h-24 overflow-y-auto"
-                        style="max-height: 6rem; overflow-y: auto"
                     ></div>
                 </div>
 
@@ -1721,8 +1672,7 @@
                 </div>
                 <div
                     id="approve-sign-error"
-                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem]"
+                    class="text-xs mb-2 border border-border border-dashed p-1 min-h-[1.875rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <div class="flex justify-between">
                     <button
@@ -1846,8 +1796,7 @@
                 </div>
                 <div
                     id="state-recovery-flash"
-                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem] invisible"
-                    style="visibility: hidden"
                 ></div>
                 <button
                     id="btn-state-recovery-reset"

src/popup/index.js

@@ -48,6 +48,14 @@ function renderWalletList() {
     home.render(ctx);
 }
 
+// Aborted when the popup page goes away, closed or reloaded. Chrome then
+// cancels the requests the page still has open, and a cancelled fetch() fails
+// with the same "Failed to fetch" as a server that cannot be reached. pagehide
+// fires first, so code that reports a failed request checks this and stays
+// silent about one the page's own closing cancelled.
+const pageClosed = new AbortController();
+window.addEventListener("pagehide", () => pageClosed.abort());
+
 let refreshInFlight = false;
 
 // The ten-second refresh init() starts, stopped when the popup moves to the
@@ -66,6 +74,7 @@ async function doRefreshAndRender() {
                 state.blockscoutUrl,
                 state.trackedTokens,
                 state.networkId,
+                pageClosed.signal,
             ),
         ]);
         state.lastBalanceRefresh = Date.now();
@@ -87,6 +96,7 @@ async function doRefreshAndRender() {
 const ctx = {
     renderWalletList,
     doRefreshAndRender,
+    pageClosed: pageClosed.signal,
     showAddWalletView: () => {
         pushCurrentView();
         addWallet.show();

src/popup/views/addressDetail.js

@@ -33,8 +33,8 @@ const { walletDefect } = require("../../shared/walletDefects");
 
 // The defect of the wallet the selected address belongs to, or null. Both the
 // send and the private-key export path check it before asking for a password,
-// so a wallet that cannot derive its keys says so instead of failing after the
+// so a wallet whose key getSignerForAddress refuses says so instead of failing
-// user has typed one in.
+// after the user has typed one in.
 function selectedWalletDefect() {
     if (state.selectedWallet === null) return null;
     return walletDefect(state.wallets[state.selectedWallet]);
@@ -66,7 +66,7 @@ function show() {
     $("address-line").dataset.full = addr.address;
     attachCopyHandlers($("address-line"));
     const usdTotal = formatAddressTotal(getAddressValue(addr));
-    $("address-usd-total").innerHTML = usdTotal || " ";
+    $("address-usd-total").innerHTML = escapeHtml(usdTotal) || " ";
     const ensEl = $("address-ens");
     // ENS is now shown inside renderAddressHtml, hide the separate element
     ensEl.classList.add("hidden");
@@ -181,10 +181,10 @@ function renderTransactions(txs) {
         // it on the line above rather than replacing it.
         const nameStr = escapeHtml(title || ensName || "");
         const err = tx.isError ? " (failed)" : "";
-        const opacity = tx.isError ? " opacity:0.5;" : "";
+        const opacity = tx.isError ? " opacity-50" : "";
         const ago = escapeHtml(timeAgo(tx.timestamp));
         const iso = escapeHtml(isoDate(tx.timestamp));
-        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
+        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover${opacity}" data-tx="${i}">`;
         html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
         html += txCounterpartyHtml(counterparty, nameStr, amountStr);
         html += `</div>`;
@@ -259,9 +259,10 @@ function init(_ctx) {
     $("btn-export-privkey").addEventListener("click", () => {
         moreDropdown.classList.add("hidden");
         moreBtn.classList.remove("bg-fg", "text-bg");
-        // There is no private key to export for an address this wallet
+        // This address's private key can be derived from the stored key,
-        // cannot derive. Without this the export screen would take a
+        // but export goes through getSignerForAddress, which refuses a key
-        // password and then report it as wrong.
+        // that is not a master key. Without this the export screen would
+        // take a password and then report that refusal as a wrong password.
         const defect = selectedWalletDefect();
         if (defect) {
             showFlash(defect.shortMessage);

src/popup/views/addressToken.js

@@ -103,7 +103,7 @@ function show() {
     // USD total for this token only
     const usdVal = price && amount !== null ? amount * price : null;
     const usdStr = formatUsd(usdVal);
-    $("address-token-usd-total").innerHTML = usdStr || " ";
+    $("address-token-usd-total").innerHTML = escapeHtml(usdStr) || " ";
 
     // Single token balance line (no tokenId — not clickable here)
     $("address-token-balance").innerHTML = balanceLine(symbol, amount, price);
@@ -148,9 +148,9 @@ function show() {
         if (tokenSymbol)
             infoHtml += `<div class="mb-1"><span class="text-muted">Symbol:</span> ${tokenSymbol}</div>`;
         if (tokenDecimals != null)
-            infoHtml += `<div class="mb-1"><span class="text-muted">Decimals:</span> ${tokenDecimals}</div>`;
+            infoHtml += `<div class="mb-1"><span class="text-muted">Decimals:</span> ${escapeHtml(tokenDecimals)}</div>`;
         if (tokenHolders != null)
-            infoHtml += `<div class="mb-1"><span class="text-muted">Holders:</span> ${Number(tokenHolders).toLocaleString()}</div>`;
+            infoHtml += `<div class="mb-1"><span class="text-muted">Holders:</span> ${escapeHtml(Number(tokenHolders).toLocaleString())}</div>`;
         if (projectUrl)
             infoHtml += `<div class="mb-1"><span class="text-muted">Website:</span> <a href="${escapeHtml(projectUrl)}" target="_blank" rel="noopener" class="underline decoration-dashed">${escapeHtml(projectUrl)}</a></div>`;
         contractInfo.innerHTML = infoHtml;
@@ -258,10 +258,10 @@ function renderTransactions(txs) {
         // it on the line above rather than replacing it.
         const nameStr = escapeHtml(title || ensName || "");
         const err = tx.isError ? " (failed)" : "";
-        const opacity = tx.isError ? " opacity:0.5;" : "";
+        const opacity = tx.isError ? " opacity-50" : "";
         const ago = escapeHtml(timeAgo(tx.timestamp));
         const iso = escapeHtml(isoDate(tx.timestamp));
-        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
+        html += `<div class="tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover${opacity}" data-tx="${i}">`;
         html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
         html += txCounterpartyHtml(counterparty, nameStr, amountStr);
         html += `</div>`;

src/popup/views/approval.js

@@ -822,9 +822,10 @@ function setSignButtonBusy(busy) {
 }
 
 // Say so on the approval screen itself, and disable the approve button, when
-// the address the approval was raised for belongs to a wallet whose keys
+// the address the approval was raised for belongs to a wallet whose key
-// cannot be derived. Without this the screen would take a password and fail
+// getSignerForAddress refuses. Without this the screen would take a password
-// after deriving it. Reject stays available; the wallet is not touched.
+// and fail after deriving it. Reject stays available; the wallet is not
+// touched.
 // Returns true when it gated.
 function gateOnWalletDefect(errorId, buttonId, address) {
     const owner = findWalletFor(address);

src/popup/views/confirmTx.js

@@ -21,6 +21,7 @@ const {
 } = require("./helpers");
 const { state, currentNetwork } = require("../../shared/state");
 const { getSignerForAddress } = require("../../shared/wallet");
+const { walletDefect } = require("../../shared/walletDefects");
 const { decryptWithPassword } = require("../../shared/vault");
 const { formatUsd, getPrice } = require("../../shared/prices");
 const { getProvider } = require("../../shared/balances");
@@ -537,6 +538,15 @@ function init(_ctx) {
     onViewLeave("confirm-tx", clearPassword);
 
     $("btn-confirm-send").addEventListener("click", async () => {
+        const wallet = state.wallets[state.selectedWallet];
+        // Every Send button refuses a defective wallet before this screen,
+        // but the popup also reopens onto it from a saved view.
+        const defect = walletDefect(wallet);
+        if (defect) {
+            showError("confirm-tx-password-error", defect.shortMessage);
+            return;
+        }
+
         const password = $("confirm-tx-password").value;
         if (!password) {
             showError(
@@ -546,7 +556,6 @@ function init(_ctx) {
             return;
         }
 
-        const wallet = state.wallets[state.selectedWallet];
         let decryptedSecret;
         hideError("confirm-tx-password-error");
 

src/popup/views/helpers.js

@@ -325,7 +325,7 @@ function balanceLine(symbol, amount, price, tokenId) {
     const qty = amount === null ? "quantity unknown" : amount.toFixed(4);
     const usd =
         price && amount !== null
-            ? formatUsd(amount * price) || " "
+            ? escapeHtml(formatUsd(amount * price)) || " "
             : " ";
     // tokenId is a contract address out of the same explorer JSON, and it
     // lands inside a quoted attribute.
@@ -335,7 +335,7 @@ function balanceLine(symbol, amount, price, tokenId) {
         : "";
     return (
         `<div class="flex text-xs${clickClass}"${tokenAttr}>` +
-        `<span class="flex justify-between" style="width:42ch;max-width:100%">` +
+        `<span class="flex justify-between w-[42ch] max-w-full">` +
         `<span>${escapeHtml(displaySymbol(symbol))}</span>` +
         `<span>${qty}</span>` +
         `</span>` +
@@ -430,23 +430,26 @@ function truncateMiddle(str, maxLen) {
 
 // 16 colors evenly spaced around the hue wheel (22.5° apart),
 // all at HSL saturation 70%, lightness 50% for uniform vibrancy.
+// Each is a whole Tailwind class: Tailwind builds only the classes it finds
+// written out in the source, so the class name cannot be put together at
+// runtime.
 const ADDRESS_COLORS = [
-    "#d92626",
+    "bg-[#d92626]",
-    "#d96926",
+    "bg-[#d96926]",
-    "#d9ac26",
+    "bg-[#d9ac26]",
-    "#c2d926",
+    "bg-[#c2d926]",
-    "#80d926",
+    "bg-[#80d926]",
-    "#3dd926",
+    "bg-[#3dd926]",
-    "#26d953",
+    "bg-[#26d953]",
-    "#26d996",
+    "bg-[#26d996]",
-    "#26d9d9",
+    "bg-[#26d9d9]",
-    "#2696d9",
+    "bg-[#2696d9]",
-    "#2653d9",
+    "bg-[#2653d9]",
-    "#3d26d9",
+    "bg-[#3d26d9]",
-    "#8026d9",
+    "bg-[#8026d9]",
-    "#c226d9",
+    "bg-[#c226d9]",
-    "#d926ac",
+    "bg-[#d926ac]",
-    "#d92669",
+    "bg-[#d92669]",
 ];
 
 function addressColor(address) {
@@ -456,12 +459,12 @@ function addressColor(address) {
 
 function addressDotHtml(address) {
     const color = addressColor(address);
-    return `<span style="width:8px;height:8px;border-radius:50%;display:inline-block;background:${color};margin-right:4px;vertical-align:middle;flex-shrink:0;"></span>`;
+    return `<span class="inline-block w-[8px] h-[8px] rounded-[50%] ${color} mr-[4px] align-middle shrink-0"></span>`;
 }
 
 function blockieHtml(address) {
     const src = makeBlockie(address);
-    return `<img src="${escapeHtml(src)}" width="48" height="48" style="image-rendering:pixelated;border-radius:50%;display:inline-block">`;
+    return `<img src="${escapeHtml(src)}" width="48" height="48" class="inline-block rounded-[50%] [image-rendering:pixelated]">`;
 }
 
 // Look up an address across all wallets and return its title
@@ -571,7 +574,7 @@ function timeAgo(timestamp) {
 
 // Shared external-link icon SVG used across all views.
 const EXT_ICON =
-    `<span style="display:inline-block;width:10px;height:10px;margin-left:4px;vertical-align:middle">` +
+    `<span class="inline-block w-[10px] h-[10px] ml-[4px] align-middle">` +
     `<svg viewBox="0 0 12 12" fill="none" stroke="currentColor" stroke-width="1.5">` +
     `<path d="M4.5 1.5H2a.5.5 0 00-.5.5v8a.5.5 0 00.5.5h8a.5.5 0 00.5-.5V7.5"/>` +
     `<path d="M7 1.5h3.5V5M7 5.5L10.5 1.5"/>` +

src/popup/views/home.js

@@ -63,7 +63,7 @@ function renderTotalValue() {
     const ethPrice = getPrice("ETH");
     if (priceEl) {
         priceEl.innerHTML = ethPrice
-            ? formatUsd(ethPrice) + " USD/ETH"
+            ? escapeHtml(formatUsd(ethPrice) + " USD/ETH")
             : " ";
     }
 
@@ -79,7 +79,8 @@ function renderTotalValue() {
     el.textContent = ethStr + ethUsd;
 
     if (subEl) {
-        subEl.innerHTML = formatAddressTotal(getAddressValue(addr)) || " ";
+        subEl.innerHTML =
+            escapeHtml(formatAddressTotal(getAddressValue(addr))) || " ";
     }
 }
 
@@ -130,10 +131,10 @@ function renderHomeTxList(ctx) {
         const title = addressTitle(counterparty, state.wallets);
         const titleStr = title ? escapeHtml(title) : "";
         const err = tx.isError ? " (failed)" : "";
-        const opacity = tx.isError ? " opacity:0.5;" : "";
+        const opacity = tx.isError ? " opacity-50" : "";
         const ago = escapeHtml(timeAgo(tx.timestamp));
         const iso = escapeHtml(isoDate(tx.timestamp));
-        html += `<div class="home-tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover" data-tx="${i}" style="${opacity}">`;
+        html += `<div class="home-tx-row py-2 border-b border-border-light text-xs cursor-pointer hover:bg-hover${opacity}" data-tx="${i}">`;
         html += `<div class="flex justify-between"><span class="text-muted" title="${iso}">${ago}</span><span>${dirLabel}${err}</span></div>`;
         html += txCounterpartyHtml(counterparty, titleStr, amountStr);
         html += `</div>`;
@@ -224,6 +225,9 @@ async function loadHomeTxs(ctx) {
         homeTxs = merged.slice(0, 25);
         renderHomeTxList(ctx);
     } catch (e) {
+        // Cancelled by the popup closing, not failed: see pageClosed in
+        // src/popup/index.js.
+        if (ctx.pageClosed.aborted) return;
         log.errorf("loadHomeTxs failed:", e.message);
         const list = $("home-tx-list");
         if (list) {
@@ -240,7 +244,7 @@ function walletListHtml() {
     state.wallets.forEach((wallet, wi) => {
         const defect = walletDefect(wallet);
         html += `<div>`;
-        html += `<div class="flex justify-between items-center bg-section py-1 px-2" style="margin:0 -0.5rem">`;
+        html += `<div class="flex justify-between items-center bg-section py-1 px-2 -mx-2">`;
         html += `<span class="font-bold cursor-pointer wallet-name underline decoration-dashed" data-wallet="${wi}">${escapeHtml(wallet.name)}</span>`;
         // No "+" on a defective wallet: deriving another address from that
         // xpub would only add one more address the key does not produce
@@ -254,12 +258,12 @@ function walletListHtml() {
         wallet.addresses.forEach((addr, ai) => {
             html += `<div class="address-row py-1 border-b border-border-light cursor-pointer hover:bg-hover" data-wallet="${wi}" data-address="${ai}">`;
             const isActive = state.activeAddress === addr.address;
-            const infoBtn = `<span class="btn-addr-info text-xs cursor-pointer border border-border hover:bg-fg hover:text-bg" style="padding:0" data-wallet="${wi}" data-address="${ai}">[info]</span>`;
+            const infoBtn = `<span class="btn-addr-info text-xs cursor-pointer border border-border hover:bg-fg hover:text-bg p-0" data-wallet="${wi}" data-address="${ai}">[info]</span>`;
             // Only where a wallet can spare the address: a wallet holding a
             // single address has no remove control, because its last address
             // is never removable.
             const removeBtn = canRemoveAddress(wallet)
-                ? `<span class="btn-remove-address text-xs cursor-pointer border border-border hover:bg-fg hover:text-bg ml-1" style="padding:0" data-wallet="${wi}" data-address="${ai}" title="Remove this address from the wallet">[x]</span>`
+                ? `<span class="btn-remove-address text-xs cursor-pointer border border-border hover:bg-fg hover:text-bg ml-1 p-0" data-wallet="${wi}" data-address="${ai}" title="Remove this address from the wallet">[x]</span>`
                 : "";
             const dot = addressDotHtml(addr.address);
             const titleBold = isActive ? "font-bold" : "";
@@ -280,7 +284,7 @@ function walletListHtml() {
             }
             html += `<div class="am-address text-xs">${escapeHtml(addr.address)}</div>`;
             const addrTotal = formatAddressTotal(getAddressValue(addr));
-            html += `<div class="text-xs text-muted text-right min-h-[1rem]">${addrTotal || "&nbsp;"}</div>`;
+            html += `<div class="text-xs text-muted text-right min-h-[1rem]">${escapeHtml(addrTotal) || "&nbsp;"}</div>`;
             html += balanceLinesForAddress(
                 addr,
                 state.trackedTokens,

src/popup/views/settings.js

@@ -213,12 +213,7 @@ function show() {
     versionClickCount = 0;
 
     // Show debug well if debug mode is already enabled
-    const debugWell = $("settings-debug-well");
+    $("settings-debug-well").classList.toggle("hidden", !state.debugMode);
-    if (state.debugMode) {
-        debugWell.style.display = "";
-    } else {
-        debugWell.style.display = "none";
-    }
     $("settings-debug-mode").checked = state.debugMode;
 
     showView("settings");
@@ -434,7 +429,7 @@ function init(ctx) {
         if (versionClickCount >= 10) {
             versionClickCount = 0;
             clearTimeout(versionClickTimer);
-            $("settings-debug-well").style.display = "";
+            $("settings-debug-well").classList.remove("hidden");
         }
     });
 

src/shared/balances.js

@@ -87,7 +87,15 @@ function rawUnits(value) {
 // way `holders` already is. Absence is never filled in here: this is the
 // upstream of every screen that displays a token amount, so a value invented
 // at this point is indistinguishable from a real one everywhere below it.
-async function fetchTokenBalances(address, blockscoutUrl, trackedTokens) {
+//
+// `signal`, passed by the popup, is aborted when the popup closes; a request
+// that fails after that was cancelled by the closing and is not logged.
+async function fetchTokenBalances(
+    address,
+    blockscoutUrl,
+    trackedTokens,
+    signal,
+) {
     try {
         const resp = await debugFetch(
             blockscoutUrl + "/addresses/" + address + "/token-balances",
@@ -190,18 +198,22 @@ async function fetchTokenBalances(address, blockscoutUrl, trackedTokens) {
         }
         return balances;
     } catch (e) {
+        if (!signal?.aborted) {
             log.errorf("fetchTokenBalances failed:", e.message);
+        }
         return null;
     }
 }
 
 // Fetch ETH balances, ENS names, and ERC-20 token balances for all addresses.
+// `signal` is as for fetchTokenBalances().
 async function refreshBalances(
     wallets,
     rpcUrl,
     blockscoutUrl,
     trackedTokens,
     networkId,
+    signal,
 ) {
     log.debugf("refreshBalances start, rpc:", urlOrigin(rpcUrl));
     const provider = getProvider(rpcUrl, networkId);
@@ -220,6 +232,7 @@ async function refreshBalances(
                         log.debugf("ETH balance", addr.address, addr.balance);
                     })
                     .catch((e) => {
+                        if (signal?.aborted) return;
                         log.errorf(
                             "ETH balance failed",
                             addr.address,
@@ -243,6 +256,7 @@ async function refreshBalances(
                         );
                     })
                     .catch((e) => {
+                        if (signal?.aborted) return;
                         log.errorf(
                             "ENS reverse failed",
                             addr.address,
@@ -258,6 +272,7 @@ async function refreshBalances(
                     addr.address,
                     blockscoutUrl,
                     trackedTokens,
+                    signal,
                 ).then((balances) => {
                     if (balances !== null) {
                         addr.tokenBalances = balances;

src/shared/symbolDisplay.js

@@ -20,6 +20,10 @@
 // (MSYRUPUSDP), so nothing the wallet ships as a real token is ever
 // truncated. The ellipsis is what tells the user the name they are looking
 // at is not the whole name — worth knowing before they send to it.
+//
+// Characters are counted as code points, not UTF-16 units, so an emoji is
+// one character and the cut never falls between the two halves of one: a
+// half on its own renders as U+FFFD.
 
 const MAX_SYMBOL_LENGTH = 12;
 
@@ -32,8 +36,9 @@ const UNKNOWN_SYMBOL = "???";
 function displaySymbol(symbol) {
     const s = symbol === null || symbol === undefined ? "" : String(symbol);
     if (s.length === 0) return UNKNOWN_SYMBOL;
-    if (s.length <= MAX_SYMBOL_LENGTH) return s;
+    const chars = Array.from(s);
-    return s.slice(0, MAX_SYMBOL_LENGTH - 1) + "…";
+    if (chars.length <= MAX_SYMBOL_LENGTH) return s;
+    return chars.slice(0, MAX_SYMBOL_LENGTH - 1).join("") + "…";
 }
 
 module.exports = {

src/shared/walletDefects.js

@@ -13,11 +13,17 @@ const NON_MASTER_XPRV = "non-master-xprv";
 
 // An "xprv" wallet stores the neutered BIP-44 Ethereum node, four levels below
 // the key that was imported: the current import path derives the absolute
-// m/44'/60'/0'/0 from a depth-0 key, and the pre-#210 path derived the same
+// m/44'/60'/0'/0 from a depth-0 key, and the path before #210 (57959b7)
-// four levels as a relative path beneath whatever depth it was given. A master
+// derived the same four levels as a relative path beneath whatever depth it
-// import therefore stores a depth-4 xpub and a depth-d import stores depth
+// was given. A master import therefore stores a depth-4 xpub and a depth-d
-// d + 4, which makes the stored xpub an exact read on the imported key's
+// import stores depth d + 4, which makes the stored xpub an exact read on the
-// depth — and it is readable without the password, unlike the key itself.
+// imported key's depth — and it is readable without the password, unlike the
+// key itself.
+//
+// The first import path (7a7f9c5) does not fit: it stored the imported key's
+// own xpub with no derivation, so a wallet it wrote is judged wrongly here (a
+// master import as defective, a depth-4 import as sound). 57959b7 replaced it
+// in the same push, and no tag contains it.
 const BIP44_ETH_XPUB_DEPTH = 4;
 
 const DEFECTS = {

tests/addressValue.test.js

@@ -194,6 +194,14 @@ describe("the wallet list on Home", () => {
         clearPrices();
         expect(walletListTotal(FULLY_PRICED)).toBe(" ");
     });
+
+    // A total under a cent is written "< $0.01", and the "<" is escaped
+    // here as the removal warning escapes it.
+    test("a total under a cent is escaped, as on the removal warning", () => {
+        const tiny = { ...EMPTY, balance: "0.000001" };
+        expect(walletListTotal(tiny)).toBe("Total: &lt; $0.01");
+        expect(removalWarningTotal(tiny)).toBe("Total: &lt; $0.01");
+    });
 });
 
 describe("the balance warning on the address-removal confirmation", () => {

tests/balanceLineEscaping.test.js

@@ -66,4 +66,11 @@ describe("balanceLine", () => {
         expect(html).toContain("<span>1.5000</span>");
         expect(html).toContain('data-token="0xabc"');
     });
+
+    // formatUsd() writes a value under a cent as "< $0.01".
+    test("escapes the USD value along with the symbol", () => {
+        const html = balanceLine("USDC", 0.001, 1, null);
+        expect(html).toContain("&lt; $0.01");
+        expect(html).not.toContain("< $0.01");
+    });
 });

tests/balanceRefreshCancelled.test.js

@@ -0,0 +1,67 @@
+// The balance refresh does not report a request the popup's own closing
+// cancelled, and still reports one that failed while the popup was open
+// (https://git.eeqj.de/sneak/AutistMask/issues/218).
+//
+// In the popup a cancelled fetch() fails with the same "Failed to fetch" as a
+// server that cannot be reached, so every request here fails that way, and
+// only the signal the popup aborts on pagehide tells the two cases apart.
+
+const { FetchRequest } = require("ethers");
+const { refreshBalances } = require("../src/shared/balances");
+
+const RPC_URL = "https://rpc.example.invalid";
+const EXPLORER_URL = "https://explorer.example.invalid/api/v2";
+const ADDRESS = "0x1111111111111111111111111111111111111111";
+
+const realFetch = globalThis.fetch;
+let logged;
+
+beforeEach(() => {
+    logged = [];
+    jest.spyOn(console, "error").mockImplementation((...args) => {
+        logged.push(args.map(String).join(" "));
+    });
+    const failedToFetch = async () => {
+        throw new TypeError("Failed to fetch");
+    };
+    // The RPC calls (ETH balance, ENS name) and the explorer request (token
+    // balances) all fail the same way.
+    FetchRequest.registerGetUrl(failedToFetch);
+    globalThis.fetch = jest.fn(failedToFetch);
+});
+
+afterEach(() => {
+    FetchRequest.registerGetUrl(FetchRequest.createGetUrlFunc());
+    globalThis.fetch = realFetch;
+    jest.restoreAllMocks();
+});
+
+function refresh(signal) {
+    const wallets = [{ addresses: [{ address: ADDRESS }] }];
+    return refreshBalances(
+        wallets,
+        RPC_URL,
+        EXPLORER_URL,
+        [],
+        "mainnet",
+        signal,
+    );
+}
+
+test("a failure while the popup is open is reported", async () => {
+    await refresh(new AbortController().signal);
+    for (const label of [
+        "ETH balance failed",
+        "ENS reverse failed",
+        "fetchTokenBalances failed: Failed to fetch",
+    ]) {
+        expect(logged.some((line) => line.includes(label))).toBe(true);
+    }
+});
+
+test("a failure once the popup has closed is not", async () => {
+    const pageClosed = new AbortController();
+    pageClosed.abort();
+    await refresh(pageClosed.signal);
+    expect(logged).toEqual([]);
+});

tests/buildWatch.test.js

@@ -0,0 +1,104 @@
+// `make dev` runs `node build.js --watch`
+// (https://git.eeqj.de/sneak/AutistMask/issues/332). These drive build.js's
+// watch() over a temp directory with a stand-in for build(), so nothing here
+// builds or writes dist/.
+
+const fs = require("fs");
+const os = require("os");
+const path = require("path");
+
+const { watch } = require("../build");
+
+let dir;
+let watchers = [];
+
+beforeEach(() => {
+    dir = fs.mkdtempSync(path.join(os.tmpdir(), "autistmask-watch-"));
+    fs.mkdirSync(path.join(dir, "nested"));
+    jest.spyOn(console, "log").mockImplementation(() => {});
+    jest.spyOn(console, "error").mockImplementation(() => {});
+});
+
+afterEach(() => {
+    for (const watcher of watchers) watcher.close();
+    watchers = [];
+    fs.rmSync(dir, { recursive: true, force: true });
+    jest.restoreAllMocks();
+});
+
+const sleep = (ms) => new Promise((resolve) => setTimeout(resolve, ms));
+
+// Wait until `condition()` holds; fail the test if it has not within 3s.
+async function until(condition) {
+    const deadline = Date.now() + 3000;
+    while (!condition()) {
+        if (Date.now() > deadline) throw new Error("timed out waiting");
+        await sleep(10);
+    }
+}
+
+// Save the way many editors do: write a new copy, then rename it over the
+// original, so the file at that path is a different one afterwards.
+function saveByRename(file, contents) {
+    fs.writeFileSync(`${file}.tmp`, contents);
+    fs.renameSync(`${file}.tmp`, file);
+}
+
+test("builds at start, then once per change to a file in a subdirectory", async () => {
+    const file = path.join(dir, "nested", "a.js");
+    fs.writeFileSync(file, "1");
+    let builds = 0;
+    watchers = watch([dir], async () => {
+        builds++;
+    });
+    await until(() => builds === 1);
+
+    fs.writeFileSync(file, "2");
+    await until(() => builds === 2);
+    await sleep(300);
+    expect(builds).toBe(2);
+});
+
+test("keeps seeing a file that is saved by renaming a new copy over it", async () => {
+    const file = path.join(dir, "nested", "a.js");
+    fs.writeFileSync(file, "1");
+    let builds = 0;
+    watchers = watch([dir], async () => {
+        builds++;
+    });
+    await until(() => builds === 1);
+
+    saveByRename(file, "2");
+    await until(() => builds === 2);
+    saveByRename(file, "3");
+    await until(() => builds === 3);
+});
+
+test("a failed build is reported and watching carries on", async () => {
+    let builds = 0;
+    watchers = watch([dir], async () => {
+        builds++;
+        if (builds === 1) throw new Error("unexpected token");
+    });
+    await until(() => console.error.mock.calls.length === 1);
+    expect(console.error).toHaveBeenCalledWith(
+        "Build failed: unexpected token",
+    );
+
+    fs.writeFileSync(path.join(dir, "a.js"), "1");
+    await until(() => builds === 2);
+});
+
+test("a change made while a build runs causes one more build after it", async () => {
+    let builds = 0;
+    watchers = watch([dir], async () => {
+        builds++;
+        if (builds === 1) {
+            fs.writeFileSync(path.join(dir, "a.js"), "1");
+            await sleep(200);
+        }
+    });
+    await until(() => builds === 2);
+    await sleep(300);
+    expect(builds).toBe(2);
+});

tests/contractCreation.test.js

@@ -301,7 +301,7 @@ describe.each([
     test("a contract creation's row says so, with no colour dot and no address line", async () => {
         const html = await rowsFor(historyTx(""));
         expect(html).toContain(SENTENCE);
-        expect(html).not.toContain("background:");
+        expect(html).not.toContain("bg-[#");
         expect(html).not.toContain("am-address");
         expect(html).not.toContain("undefined");
     });
@@ -309,7 +309,7 @@ describe.each([
     test("a transaction with a recipient shows its colour dot and address", async () => {
         const html = await rowsFor(historyTx(RECIPIENT));
         expectAddressLine(html);
-        expect(html).toContain("background:#");
+        expect(html).toContain("bg-[#");
         expect(html).toContain(`<div class="am-address">${RECIPIENT}</div>`);
     });
 });

tests/e2e/firefox/run.js

@@ -46,6 +46,7 @@
 
 const fs = require("fs");
 const path = require("path");
+const { isDeepStrictEqual } = require("util");
 
 const {
     Transaction,
@@ -62,6 +63,10 @@ const {
 const { ConsoleErrors, EXTENSION_ORIGIN, start, sleep } = require("./driver");
 const { startDappServer } = require("./dapp");
 const { STUB_COUNTERPARTY } = require("../network");
+const {
+    STATE_SCHEMA_VERSION,
+    stateProblem,
+} = require("../../../src/shared/stateSchema");
 
 const REPO_ROOT = path.resolve(__dirname, "..", "..", "..");
 const POPUP_URL = EXTENSION_ORIGIN + "/src/popup/index.html";
@@ -122,6 +127,123 @@ step("the popup is drawn in the monospace font it declares", async (env) => {
     );
 });
 
+// The recovery screen (#361): the Chrome suite's four cases, run before any
+// wallet exists for the same reason. With no wallet nothing saves on a timer,
+// so no save can write a good record over the unreadable one. The last of them
+// erases it, which leaves the popup on Welcome for wallet creation.
+
+// A profile a newer build wrote: a wallet with its encrypted secret, under a
+// schema version this build refuses to read.
+const UNREADABLE_RECORD = {
+    schemaVersion: STATE_SCHEMA_VERSION + 1,
+    wallets: [
+        {
+            type: "hd",
+            name: "Main",
+            xpub: "xpub-written-by-a-newer-build",
+            encryptedSecret: "ciphertext-written-by-a-newer-build",
+            nextIndex: 1,
+            addresses: [{ address: STUB_COUNTERPARTY }],
+        },
+    ],
+};
+
+// The whole stored record, read on the popup page.
+function storedRecord(d) {
+    return d.executeAsync(
+        `const done = arguments[arguments.length - 1];
+         browser.storage.local.get("autistmask").then((r) => done(r.autistmask));`,
+    );
+}
+
+step(
+    "an unreadable stored record opens the popup on the recovery screen",
+    async (env) => {
+        const d = env.driver;
+        // The popup the first step opened saves once, as it shows Welcome.
+        // Stored before that save lands, the record would be written over.
+        const deadline = Date.now() + 15000;
+        for (;;) {
+            const stored = await storedRecord(d);
+            if (stored && stored.currentView === "welcome") break;
+            assert(
+                Date.now() < deadline,
+                "the Welcome screen's save never landed: " +
+                    JSON.stringify(stored),
+            );
+            await sleep(100);
+        }
+        await d.executeAsync(
+            `const done = arguments[arguments.length - 1];
+             browser.storage.local.set({ autistmask: arguments[0] }).then(() => done());`,
+            [UNREADABLE_RECORD],
+        );
+
+        await d.navigate(POPUP_URL);
+        await d.waitVisible("#view-state-recovery");
+        const problem = await d.text("#state-recovery-problem");
+        assert(
+            problem === stateProblem(UNREADABLE_RECORD),
+            "the recovery screen names the problem as " +
+                JSON.stringify(problem),
+        );
+    },
+);
+
+step("Export Saved Data shows the stored record verbatim", async (env) => {
+    const d = env.driver;
+    await d.click("#btn-state-recovery-export");
+    await d.waitVisible("#state-recovery-blob");
+    const exported = await d.value("#state-recovery-blob");
+    assert(exported !== "", "Export Saved Data left the text box empty");
+    assert(
+        isDeepStrictEqual(JSON.parse(exported), UNREADABLE_RECORD),
+        "the text box does not hold the stored record: " + exported,
+    );
+});
+
+step("a near-miss confirmation phrase erases nothing", async (env) => {
+    const d = env.driver;
+    await d.fill("#state-recovery-reset-input", "ERASE MY WALLETS");
+    await d.click("#btn-state-recovery-reset");
+    await d.waitFor(
+        "the refusal on the error line",
+        `return document.getElementById("state-recovery-flash").textContent ===
+             "Type ERASE MY WALLET to confirm. Nothing was erased.";`,
+    );
+    const stored = await storedRecord(d);
+    assert(
+        isDeepStrictEqual(stored, UNREADABLE_RECORD),
+        "the stored record changed: " + JSON.stringify(stored),
+    );
+});
+
+step(
+    "the exact confirmation phrase erases the record and reloads into Welcome",
+    async (env) => {
+        const d = env.driver;
+        try {
+            await d.fill("#state-recovery-reset-input", "ERASE MY WALLET");
+            await d.click("#btn-state-recovery-reset");
+            // Welcome is the proof of the erase: the record still stored
+            // would put the recovery screen up again, and its wallet would
+            // open Home.
+            await d.waitVisible("#view-welcome");
+        } finally {
+            // Whatever failed in these four steps, wallet creation starts
+            // from Welcome. The record left stored would fail every step
+            // after this.
+            if (!(await d.isVisible("#view-welcome"))) {
+                await d.executeAsync(
+                    `const done = arguments[arguments.length - 1];
+                     browser.storage.local.remove("autistmask").then(() => done());`,
+                );
+                await d.navigate(POPUP_URL);
+            }
+        }
+    },
+);
+
 step("wallet creation through the UI reaches the main view", async (env) => {
     const d = env.driver;
     await d.click("#btn-welcome-add");

tests/e2e/network.js

@@ -22,7 +22,7 @@
 
 "use strict";
 
-const { Transaction } = require("ethers");
+const { AbiCoder, Transaction } = require("ethers");
 
 // Fictional ERC-20 used to seed the transaction-detail test. The symbol
 // must not collide with any entry in src/shared/tokenList.js, or
@@ -244,12 +244,16 @@ function latestBlock() {
     };
 }
 
-// keccak("decimals()")[0:4].
+// keccak("decimals()")[0:4], and the same for symbol() and name().
 const SELECTOR_DECIMALS = "0x313ce567";
+const SELECTOR_SYMBOL = "0x95d89b41";
+const SELECTOR_NAME = "0x06fdde03";
 
-// Every eth_call still answers with a zero word except decimals() on the
+// Every eth_call still answers with a zero word except decimals(), symbol()
-// stub token, which the wallet reads back at signing time to compare with
+// and name() on the stub token. The wallet reads decimals() back at signing
-// the scale the confirmation screen rendered (issue #305).
+// time to compare with the scale the confirmation screen rendered (issue
+// #305). Adding the token by its contract address reads all three (issue
+// #295); symbol() and name() answer what the explorer reports for it.
 //
 // opts.tokenDecimalsOverride is the lying contract: set it and decimals()
 // answers something other than the value this same fixture reports through
@@ -263,9 +267,17 @@ function ethCallResult(req, opts) {
     if (!call || typeof call !== "object") return ZERO_WORD;
     const data = String(call.data || call.input || "").toLowerCase();
     const to = String(call.to || "").toLowerCase();
-    if (data.startsWith(SELECTOR_DECIMALS) && to === STUB_TOKEN.address) {
+    if (to !== STUB_TOKEN.address) return ZERO_WORD;
+    if (data.startsWith(SELECTOR_DECIMALS)) {
         return word(opts.tokenDecimalsOverride ?? STUB_TOKEN.decimals);
     }
+    const abi = AbiCoder.defaultAbiCoder();
+    if (data.startsWith(SELECTOR_SYMBOL)) {
+        return abi.encode(["string"], [tokenObject(opts).symbol]);
+    }
+    if (data.startsWith(SELECTOR_NAME)) {
+        return abi.encode(["string"], [tokenObject(opts).name]);
+    }
     return ZERO_WORD;
 }
 
@@ -406,27 +418,23 @@ function sleep(ms) {
 const HOLD_POLL_MS = 25;
 const HOLD_MAX_MS = 30000;
 
-// Hold a gas estimate open for as long as the test asks.
+// Hold a reply open for as long as the test asks: until opts[name] is false.
 //
-// opts.holdGasEstimate is read here rather than captured, so a test flips it
+// The switch (holdGasEstimate or holdBlockscout) is read here rather than
-// on the same options object the route was registered with — the same
+// captured, so a test flips it on the same options object the route was
-// pattern as seedTokenTransfer. This is the only way to observe the
+// registered with — the same pattern as seedTokenTransfer. This is the only way
-// confirmation screen while its estimate is genuinely in flight; sampling
+// to observe a screen while its request is genuinely in flight; sampling the
-// the screen and hoping to win a race against the network would assert
+// screen and hoping to win a race against the network would assert nothing on
-// nothing on a slow machine.
+// a slow machine.
 //
 // It never gives up quietly. A hold that outlives the bound is reported like
 // any other harness fault, because a "pending" state that stopped being
 // pending on its own is a green assertion about the wrong screen.
-async function awaitRelease(opts, report) {
+async function awaitRelease(opts, name, report) {
     const started = Date.now();
-    while (opts.holdGasEstimate) {
+    while (opts[name]) {
         if (Date.now() - started > HOLD_MAX_MS) {
-            report(
+            report(name + " was never released after " + HOLD_MAX_MS + "ms");
-                "held gas estimate was never released after " +
-                    HOLD_MAX_MS +
-                    "ms",
-            );
             return;
         }
         await sleep(HOLD_POLL_MS);
@@ -448,6 +456,16 @@ function rpcReply(req, opts, report) {
         return Object.assign(envelope, { result: ethCallResult(req, opts) });
     }
     if (req.method === "eth_getTransactionReceipt") {
+        // A lookup that fails, which the wait screen counts differently from
+        // one that answers "not mined yet" (README.md, WaitTx).
+        if (opts.failReceiptLookup) {
+            return Object.assign(envelope, {
+                error: {
+                    code: -32000,
+                    message: "e2e fixture: receipt lookup failed",
+                },
+            });
+        }
         const hash = Array.isArray(req.params) ? req.params[0] : null;
         return Object.assign(envelope, {
             result: opts.seedReceipt && hash ? transactionReceipt(hash) : null,
@@ -540,7 +558,7 @@ async function handleRpc(route, postData, opts, report) {
         return route.abort();
     }
     if (batch.some((req) => req.method === "eth_estimateGas")) {
-        await awaitRelease(opts, report);
+        await awaitRelease(opts, "holdGasEstimate", report);
     }
 
     const replies = batch.map((req) => rpcReply(req, opts, report));
@@ -596,6 +614,10 @@ function traceEnabled(raw) {
  *   node-side refusal.
  * @param {boolean} [opts.holdGasEstimate]  hold every batch containing an
  *   eth_estimateGas until this is cleared again.
+ * @param {boolean} [opts.holdBlockscout]  hold every Blockscout request until
+ *   this is cleared again.
+ * @param {boolean} [opts.failTransactionList]  fail every request for an
+ *   address's transaction list as a network error; read at request time.
  * @param {string[]} [opts.broadcastTransactions]  every raw signed
  *   transaction handed to eth_sendRawTransaction, appended in order.
  * @param {number|string|null} [opts.tokenDecimalsOverride]  the scale
@@ -607,6 +629,8 @@ function traceEnabled(raw) {
  *   symbol is markup; read at request time.
  * @param {boolean} [opts.seedReceipt]  answer eth_getTransactionReceipt with a
  *   confirmed receipt instead of null, so a wait screen resolves.
+ * @param {boolean} [opts.failReceiptLookup]  answer eth_getTransactionReceipt
+ *   with an error, so every receipt lookup fails; read at request time.
  * @returns {Promise<{waitForServiceWorkerTraffic: (ms: number) =>
  *   Promise<string|null>}>}
  */
@@ -669,7 +693,12 @@ async function installNetworkStubs(ctx, opts) {
 
         // Blockscout v2
         if (p.includes("/api/v2/")) {
+            await awaitRelease(opts, "holdBlockscout", report);
             if (/\/addresses\/0x[0-9a-fA-F]{40}\/transactions$/.test(p)) {
+                // Aborted rather than answered with an error status: to the
+                // page this is a server that cannot be reached, and fetch()
+                // rejects with "Failed to fetch".
+                if (opts.failTransactionList) return route.abort();
                 const addr = blockscoutAddress(p);
                 return jsonResponse(route, {
                     items:

tests/e2e/run.js

@@ -9,6 +9,8 @@
 
 "use strict";
 
+const { isDeepStrictEqual } = require("util");
+
 const {
     Transaction,
     formatEther,
@@ -47,6 +49,10 @@ const {
 } = require("./network");
 const { DUST_THRESHOLD_MESSAGE } = require("../../src/popup/dustThreshold");
 const { NETWORKS } = require("../../src/shared/networks");
+const {
+    STATE_SCHEMA_VERSION,
+    stateProblem,
+} = require("../../src/shared/stateSchema");
 
 const TEST_TIMEOUT_MS = 120000;
 
@@ -115,8 +121,8 @@ test("the popup is drawn in the monospace font it declares (#418)", async (env)
 // so a recurrence fails whichever test it lands in rather than being
 // tolerated. Since libsodium's WASM module is embedded in the bundle and
 // needs no fetch, a realm that compiles WASM is a realm where libsodium
-// takes the WASM path, and the next test drives a real vault encryption
+// takes the WASM path, and wallet creation below drives a real vault
-// through it.
+// encryption through it.
 test("the popup compiles WebAssembly under the shipped CSP (#182)", async (env) => {
     const ok = await pageCompilesWasm(env.page);
     assert(
@@ -128,6 +134,121 @@ test("the popup compiles WebAssembly under the shipped CSP (#182)", async (env)
     );
 });
 
+// The screen the popup shows when it cannot read the stored profile
+// (src/popup/views/stateRecovery.js), driven under the shipped CSP (#361).
+//
+// These run before any wallet exists, on purpose. With no wallet neither the
+// popup nor the background refreshes balances, so nothing saves while they run
+// and no save can write a good record over the unreadable one. The last of
+// them erases it, which leaves the popup on Welcome for wallet creation.
+
+// A profile a newer build wrote: a wallet with its encrypted secret, under a
+// schema version this build refuses to read.
+const UNREADABLE_RECORD = {
+    schemaVersion: STATE_SCHEMA_VERSION + 1,
+    wallets: [
+        {
+            type: "hd",
+            name: "Main",
+            xpub: "xpub-written-by-a-newer-build",
+            encryptedSecret: "ciphertext-written-by-a-newer-build",
+            nextIndex: 1,
+            addresses: [{ address: STUB_COUNTERPARTY }],
+        },
+    ],
+};
+
+// The whole stored record, read out of extension storage.
+function storedRecord(page) {
+    return page.evaluate(
+        () =>
+            new Promise((resolve) => {
+                chrome.storage.local.get("autistmask", (r) =>
+                    resolve(r.autistmask),
+                );
+            }),
+    );
+}
+
+test("an unreadable stored record opens the popup on the recovery screen (#361)", async (env) => {
+    // The popup the first test opened saves once, as it shows Welcome. Stored
+    // before that save lands, the record would be written over.
+    await waitForPersisted(
+        env.page,
+        "currentView",
+        "welcome",
+        "before the unreadable record is stored",
+    );
+    await env.page.evaluate(
+        (record) =>
+            new Promise((resolve) => {
+                chrome.storage.local.set({ autistmask: record }, resolve);
+            }),
+        UNREADABLE_RECORD,
+    );
+    await env.page.close();
+
+    env.errors.expect(
+        "the recovery screen logging the problem as it goes up",
+        /state is unusable, showing the recovery screen/,
+    );
+    env.page = await openPopup(env.ctx, env.popupUrl);
+    await visible(env.page, "#view-state-recovery");
+    const problem = await env.page.textContent("#state-recovery-problem");
+    assert(
+        problem === stateProblem(UNREADABLE_RECORD),
+        "the recovery screen names the problem as " + JSON.stringify(problem),
+    );
+});
+
+test("Export Saved Data shows the stored record verbatim (#361)", async (env) => {
+    await env.page.click("#btn-state-recovery-export");
+    await visible(env.page, "#state-recovery-blob");
+    const exported = await env.page.inputValue("#state-recovery-blob");
+    assert(exported !== "", "Export Saved Data left the text box empty");
+    assert(
+        isDeepStrictEqual(JSON.parse(exported), UNREADABLE_RECORD),
+        "the text box does not hold the stored record: " + exported,
+    );
+});
+
+test("a near-miss confirmation phrase erases nothing (#361)", async (env) => {
+    await env.page.fill("#state-recovery-reset-input", "ERASE MY WALLETS");
+    await env.page.click("#btn-state-recovery-reset");
+    await env.page.waitForFunction(
+        () =>
+            document.getElementById("state-recovery-flash").textContent ===
+            "Type ERASE MY WALLET to confirm. Nothing was erased.",
+    );
+    const stored = await storedRecord(env.page);
+    assert(
+        isDeepStrictEqual(stored, UNREADABLE_RECORD),
+        "the stored record changed: " + JSON.stringify(stored),
+    );
+});
+
+test("the exact confirmation phrase erases the record and reloads into Welcome (#361)", async (env) => {
+    try {
+        await env.page.fill("#state-recovery-reset-input", "ERASE MY WALLET");
+        await env.page.click("#btn-state-recovery-reset");
+        // Welcome is the proof of the erase: the record still stored would
+        // put the recovery screen up again, and its wallet would open Home.
+        await visible(env.page, "#view-welcome");
+    } finally {
+        // Whatever failed in these four tests, wallet creation starts from
+        // Welcome. The record left stored would fail every test after this.
+        if (!(await env.page.isVisible("#view-welcome"))) {
+            await env.page.evaluate(
+                () =>
+                    new Promise((resolve) => {
+                        chrome.storage.local.remove("autistmask", resolve);
+                    }),
+            );
+            await env.page.reload();
+        }
+    }
+});
+
 test("wallet creation through the UI reaches the main view", async (env) => {
     env.phrase = await createWallet(env.page);
     assert(
@@ -190,7 +311,7 @@ test("transaction detail renders an ERC-20 transfer (#151)", async (env) => {
         "token contract row missing the contract address, got: " +
             JSON.stringify(contractText),
     );
-    const dots = await contract.locator('span[style*="border-radius"]').count();
+    const dots = await contract.locator('span[class*="rounded-[50%]"]').count();
     assert(dots > 0, "token contract row rendered without its colour dot");
 });
 
@@ -475,6 +596,162 @@ test("tap-to-copy on the transaction detail screen copies the address (#151)", a
     );
 });
 
+// ------------------------- the last of the #150 and #151 items (#295)
+//
+// Add Token's confirm button, TransactionDetail opened from the token screen
+// and Back from it, and the explorer link on the token contract row.
+
+// The stub token stays tracked for the rest of the run: the next test reaches
+// its token screen through the balance row this one adds.
+test("a token added by its contract address is listed on the address screen (#150)", async (env) => {
+    await leaveTransactionDetail(env.page);
+    await env.page.click("#btn-add-token");
+    await visible(env.page, "#view-add-token");
+
+    await env.page.fill("#add-token-address", STUB_TOKEN.address);
+    await env.page.click("#btn-add-token-confirm");
+    await visible(env.page, "#view-address");
+
+    // No wait: the confirm renders the balance list before it shows the
+    // screen, and nothing renders the list again while the screen is up.
+    const row = env.page.locator(
+        '#address-balances [data-token="' + STUB_TOKEN.address + '"]',
+        { hasText: STUB_TOKEN.symbol },
+    );
+    const balances = await env.page.locator("#address-balances").innerText();
+    assert(
+        (await row.count()) === 1,
+        "the balance list has no " +
+            STUB_TOKEN.symbol +
+            " row for the token just added: " +
+            JSON.stringify(balances),
+    );
+});
+
+// TransactionDetail looks the same from either entry point. Only the
+// persisted stack says which one opened it, so that is what is asserted: from
+// the token screen it ends in "address-token", and Back has to land there
+// rather than on the address screen beneath it.
+test("transaction detail opened from the token screen goes Back to it (#151)", async (env) => {
+    await goHome(env.page);
+    const base = await persistedViewStack(env.page);
+
+    await env.page.locator("#wallet-list .btn-addr-info").first().click();
+    await visible(env.page, "#view-address");
+    await env.page
+        .locator('#address-balances [data-token="' + STUB_TOKEN.address + '"]')
+        .click();
+    await visible(env.page, "#view-address-token");
+
+    const row = env.page.locator("#address-token-tx-list .tx-row").first();
+    await row.waitFor({ state: "visible", timeout: 30000 });
+    await row.click();
+    await visible(env.page, "#view-transaction");
+    await waitForPersisted(
+        env.page,
+        "viewStack",
+        base.concat("main", "address", "address-token"),
+        "on transaction detail opened from the token screen",
+    );
+
+    // The stack is checked before the screen, so a Back that lands on the
+    // wrong screen fails by saying what the stack holds.
+    await env.page.click("#btn-tx-back");
+    await waitForPersisted(
+        env.page,
+        "viewStack",
+        base.concat("main", "address"),
+        "after Back from transaction detail",
+    );
+    await visible(env.page, "#view-address-token");
+
+    // Onto the address screen, which the next test starts from.
+    await env.page.click("#btn-address-token-back");
+    await visible(env.page, "#view-address");
+});
+
+// Read off the anchor rather than followed: where it points is all the popup
+// decides, and following it would only load the explorer's page. The suite is
+// on mainnet until the Settings section.
+test("the token contract row links to the explorer's token page (#151)", async (env) => {
+    await leaveTransactionDetail(env.page);
+    const row = env.page
+        .locator("#tx-list .tx-row")
+        .filter({ hasText: STUB_TOKEN.symbol });
+    await row.waitFor({ state: "visible", timeout: 30000 });
+    await row.click();
+    await visible(env.page, "#view-transaction");
+    await visible(env.page, "#tx-detail-token-contract-section");
+
+    const href = await env.page
+        .locator("#tx-detail-token-contract a")
+        .getAttribute("href");
+    const expected = "https://etherscan.io/token/" + STUB_TOKEN.address;
+    assert(
+        href === expected,
+        "the token contract row links to " +
+            JSON.stringify(href) +
+            ", expected " +
+            expected,
+    );
+});
+
+// ------------------------------------------- reload mid-refresh (#218)
+//
+// Reloading or closing the popup makes Chrome cancel the requests it still has
+// open, and in the page a cancelled fetch() fails with the same "Failed to
+// fetch" as a server that cannot be reached. Here rather than straight after
+// wallet creation because a reload also cancels the address scan that follows
+// it, which still logs (#475).
+
+// Blockscout is held, so the home screen's transaction list and token balances
+// cannot have been answered when the popup reloads. The assertion is the
+// harness's own: a console.error from the page being reloaded fails this test.
+test("reloading the popup mid-refresh reports no failure (#218)", async (env) => {
+    await goHome(env.page);
+    env.routeOpts.holdBlockscout = true;
+    try {
+        const inFlight = Promise.all([
+            env.page.waitForRequest((r) => r.url().endsWith("/transactions")),
+            env.page.waitForRequest((r) => r.url().endsWith("/token-balances")),
+        ]);
+        await env.page.reload();
+        await inFlight;
+        await env.page.reload();
+    } finally {
+        env.routeOpts.holdBlockscout = false;
+    }
+    await visible(env.page, "#view-main");
+});
+
+// The same "Failed to fetch" from a server that really cannot be reached is
+// still reported, so it still fails the run unless a test declares it. Chrome
+// reports the failed request itself as well, which a cancelled one does not.
+test("a transaction list that cannot be fetched is still reported (#218)", async (env) => {
+    env.errors.expect(
+        "loadHomeTxs failed",
+        /loadHomeTxs failed: Failed to fetch/,
+    );
+    env.errors.expect(
+        "Chrome's report of the failed request",
+        /Failed to load resource: net::ERR_FAILED/,
+    );
+    env.routeOpts.failTransactionList = true;
+    try {
+        // Drawn again by the next ten-second refresh.
+        await env.page.waitForFunction(
+            () =>
+                document
+                    .getElementById("home-tx-list")
+                    .textContent.includes("Failed to load transactions."),
+            null,
+            { timeout: 15000 },
+        );
+    } finally {
+        env.routeOpts.failTransactionList = false;
+    }
+});
+
 // -------------------------------------------- recovery phrase (#161)
 
 // The gear toggles, so pressing it while Settings is already up leaves it.
@@ -485,22 +762,26 @@ async function openSettings(page) {
     await visible(page, "#view-settings");
 }
 
-// Everything the recovery phrase screen is holding, read straight out of
+// Everything a screen that shows a secret is holding, read straight out of
 // the DOM whether or not that screen is the one on top. Reading it while it
 // is hidden is the point: "cleared on leave" means the node is empty, not
-// merely off-screen.
+// merely off-screen. `view` is "show-phrase" or "export-privkey"; the two
-async function phraseScreenState(page) {
+// screens name their elements the same way.
-    return page.evaluate(() => ({
+async function secretScreenState(page, view) {
-        value: document.getElementById("show-phrase-value").textContent,
+    return page.evaluate(
-        error: document.getElementById("show-phrase-flash").textContent,
+        (v) => ({
-        html: document.getElementById("view-show-phrase").innerHTML,
+            value: document.getElementById(v + "-value").textContent,
+            error: document.getElementById(v + "-flash").textContent,
+            html: document.getElementById("view-" + v).innerHTML,
             resultHidden: document
-            .getElementById("show-phrase-result")
+                .getElementById(v + "-result")
                 .classList.contains("hidden"),
             viewHidden: document
-            .getElementById("view-show-phrase")
+                .getElementById("view-" + v)
                 .classList.contains("hidden"),
-    }));
+        }),
+        view,
+    );
 }
 
 async function openPhraseScreen(page) {
@@ -515,12 +796,12 @@ async function revealPhrase(page) {
     await visible(page, "#show-phrase-result", 60000);
 }
 
-function assertWiped(st, phrase, where) {
+function assertWiped(st, secret, where) {
-    assert(st.value === "", "phrase still in the DOM " + where);
+    assert(st.value === "", "the secret is still in the DOM " + where);
     assert(st.resultHidden, "result section still shown " + where);
     assert(
-        !st.html.includes(phrase),
+        !st.html.includes(secret),
-        "the recovery phrase is still somewhere in the screen markup " + where,
+        "the secret is still somewhere in the screen markup " + where,
     );
 }
 
@@ -542,7 +823,8 @@ test("only an HD wallet is offered the recovery phrase action (#161)", async (en
 // The other half of the gate, against the real UI: a wallet holding a bare
 // private key has no phrase to show, so no row of it may offer the action.
 // The key is generated here rather than committed — the repo holds no
-// private keys, test ones included.
+// private keys, test ones included. It is kept on env for the private key
+// export tests (#253).
 test("a key wallet is not offered the recovery phrase action (#161)", async (env) => {
     const { Wallet } = require("ethers");
 
@@ -550,10 +832,8 @@ test("a key wallet is not offered the recovery phrase action (#161)", async (env
     await env.page.click("#btn-main-add-wallet");
     await visible(env.page, "#view-add-wallet");
     await env.page.click("#tab-privkey");
-    await env.page.fill(
+    env.privateKey = Wallet.createRandom().privateKey;
-        "#import-private-key",
+    await env.page.fill("#import-private-key", env.privateKey);
-        Wallet.createRandom().privateKey,
-    );
     await env.page.fill("#add-wallet-password", PASSWORD);
     await env.page.fill("#add-wallet-password-confirm", PASSWORD);
     await env.page.click("#btn-add-wallet-confirm");
@@ -575,7 +855,7 @@ test("a key wallet is not offered the recovery phrase action (#161)", async (env
 
 test("the recovery phrase screen holds nothing before the password (#161)", async (env) => {
     await openPhraseScreen(env.page);
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     assertWiped(st, env.phrase, "before any password was entered");
     const passwordShown = await env.page.isVisible(
         "#show-phrase-password-section",
@@ -593,7 +873,7 @@ test("a wrong password reveals nothing (#161)", async (env) => {
         { timeout: 60000 },
     );
 
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     assertWiped(st, env.phrase, "after a wrong password");
     assert(
         /^[A-Z].*\.$/.test(st.error.trim()),
@@ -609,7 +889,7 @@ test("the correct password reveals the full phrase, and nothing logs it (#161)",
     try {
         await revealPhrase(env.page);
 
-        const st = await phraseScreenState(env.page);
+        const st = await secretScreenState(env.page, "show-phrase");
         assert(
             st.value === env.phrase,
             "the displayed phrase is not the wallet's phrase, verbatim",
@@ -640,7 +920,7 @@ test("the correct password reveals the full phrase, and nothing logs it (#161)",
 test('"Back" wipes the revealed phrase (#161)', async (env) => {
     await env.page.click("#btn-show-phrase-back");
     await visible(env.page, "#view-settings");
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     assert(st.viewHidden, "the recovery phrase screen is still on top");
     assertWiped(st, env.phrase, "after Back");
 });
@@ -652,7 +932,7 @@ test("leaving by the settings gear wipes it too (#161)", async (env) => {
     await revealPhrase(env.page);
     await env.page.click("#btn-settings");
     await visible(env.page, "#view-settings");
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     assertWiped(st, env.phrase, "after leaving via the settings gear");
 });
 
@@ -689,7 +969,7 @@ test("leaving while the decrypt is in flight reveals nothing (#161)", async (env
     );
     await sleep(2000);
 
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     // Printed on every run, pass or fail: "the phrase is not there" is
     // worth more as a measurement than as a silent assertion, and the
     // same line read from a build without the guard is what this test
@@ -726,11 +1006,141 @@ test("reopening the popup never lands on the phrase screen (#161)", async (env)
     env.page = await openPopup(env.ctx, env.popupUrl);
     await visible(env.page, "#view-main");
 
-    const st = await phraseScreenState(env.page);
+    const st = await secretScreenState(env.page, "show-phrase");
     assert(st.viewHidden, "the popup reopened onto the recovery phrase screen");
     assertWiped(st, env.phrase, "after reopening the popup");
 });
 
+// ------------------------------------------ private key export (#253)
+
+// The recovery phrase cases above, on the private key export screen. They run
+// against the key wallet imported above, not the HD wallet: leaving the screen
+// drops the address it was showing, and without one an HD wallet's key cannot
+// be derived, so there a decrypt that finished late would fail on its own and
+// the liveness check would go untested.
+
+// From Home to the export screen of the key wallet's one address. The key
+// wallet is the second wallet in the list.
+async function openPrivkeyScreen(page) {
+    await visible(page, "#view-main");
+    await page.click('#wallet-list .btn-addr-info[data-wallet="1"]');
+    await visible(page, "#view-address");
+    await page.click("#btn-more-menu");
+    await page.click("#btn-export-privkey");
+    await visible(page, "#view-export-privkey");
+}
+
+async function revealPrivkey(page) {
+    await page.fill("#export-privkey-password", PASSWORD);
+    await page.click("#btn-export-privkey-confirm");
+    await visible(page, "#export-privkey-result", 60000);
+}
+
+// Leave the export screen, or the Settings screen the gear left it for, for
+// Home. The gear put the export screen on the Back stack, so from Settings the
+// way home passes through it, already emptied
+// (https://git.eeqj.de/sneak/AutistMask/issues/461).
+async function leavePrivkeyScreen(page) {
+    if (await page.isVisible("#view-settings")) {
+        await page.click("#btn-settings-back");
+        await visible(page, "#view-export-privkey");
+    }
+    if (await page.isVisible("#view-export-privkey")) {
+        await page.click("#btn-export-privkey-back");
+        await visible(page, "#view-address");
+    }
+    if (await page.isVisible("#view-address")) {
+        await page.click("#btn-address-back");
+    }
+    await visible(page, "#view-main");
+}
+
+test("the correct password reveals the private key, and nothing logs it (#253)", async (env) => {
+    const console_ = [];
+    const listener = (msg) => console_.push(msg.text());
+    env.page.on("console", listener);
+    try {
+        await openPrivkeyScreen(env.page);
+        await revealPrivkey(env.page);
+
+        const st = await secretScreenState(env.page, "export-privkey");
+        assert(
+            st.value === env.privateKey,
+            "the displayed key is not the wallet's private key, verbatim",
+        );
+        const promptShown = await env.page.isVisible(
+            "#export-privkey-password-section",
+        );
+        assert(!promptShown, "the password prompt is still shown after unlock");
+
+        const title = await env.page.getAttribute(
+            "#export-privkey-value",
+            "title",
+        );
+        assert(title === "Click to copy", "the key is not click-to-copy");
+
+        const leaked = console_.filter((line) => line.includes(env.privateKey));
+        assert(
+            leaked.length === 0,
+            "the private key reached the console: " + JSON.stringify(leaked),
+        );
+    } finally {
+        env.page.off("console", listener);
+    }
+});
+
+test("leaving by the settings gear wipes the private key (#253)", async (env) => {
+    await visible(env.page, "#export-privkey-result");
+    await env.page.click("#btn-settings");
+    await visible(env.page, "#view-settings");
+    const st = await secretScreenState(env.page, "export-privkey");
+    assertWiped(st, env.privateKey, "after leaving via the settings gear");
+});
+
+// The same interleaving as the recovery phrase case above, and for the same
+// reason: both clicks in one page task, so the leave and its wipe run while
+// the decrypt is still awaited. Reveal stays disabled while the decrypt runs,
+// so reading it after the gear click shows the leave really came mid-decrypt.
+test("leaving while the decrypt is in flight reveals no private key (#253)", async (env) => {
+    try {
+        await leavePrivkeyScreen(env.page);
+        // The export screen cannot yet be opened twice in one popup session
+        // (https://git.eeqj.de/sneak/AutistMask/issues/460), so this second
+        // open gets a fresh one.
+        await reopenPopup(env, "main");
+        await openPrivkeyScreen(env.page);
+        await env.page.fill("#export-privkey-password", PASSWORD);
+        const inFlight = await env.page.evaluate(() => {
+            const reveal = document.getElementById(
+                "btn-export-privkey-confirm",
+            );
+            reveal.click();
+            document.getElementById("btn-settings").click();
+            return reveal.disabled;
+        });
+        assert(
+            inFlight,
+            "the decrypt was not running when the screen was left",
+        );
+        await visible(env.page, "#view-settings");
+
+        // Reveal is re-enabled in the same continuation that would have
+        // written the key, so once it is back the decrypt has finished.
+        await env.page.waitForFunction(
+            () =>
+                !document.getElementById("btn-export-privkey-confirm").disabled,
+            null,
+            { timeout: 60000 },
+        );
+
+        const st = await secretScreenState(env.page, "export-privkey");
+        assert(st.viewHidden, "the private key screen is still on top");
+        assertWiped(st, env.privateKey, "after leaving mid-decrypt");
+    } finally {
+        await leavePrivkeyScreen(env.page);
+    }
+});
+
 // ------------------------------- Back after reopening the popup (#268)
 
 // A reopened popup renders the wallet list and the view it restores onto,
@@ -1753,10 +2163,9 @@ function quantity(wei) {
 
 // Wait on the main view until a changed balance fixture has been picked up.
 //
-// Deliberately not a reload: the popup re-refreshes on a 10-second timer by
+// Not a reload: the popup re-refreshes on a 10-second timer by itself, and a
-// itself, and reloading aborts whatever fetch the home screen has open at
+// reload on the address screen still logs the transaction list it cancels
-// that instant, which the extension reports through log.errorf and the
+// (#475).
-// harness — correctly — fails the run on.
 //
 // It also deliberately settles on MAIN rather than on the address screen.
 // The address screen builds the send screen's token dropdown once, from the
@@ -2445,6 +2854,84 @@ test("a token that lies about decimals() at signing time broadcasts nothing (#30
     }
 });
 
+// ------------------------------ the wait for a receipt ending in error (#315)
+//
+// README.md (WaitTx) documents two ways the wait ends on the error screen: a
+// lookup that answers "no receipt" 60 seconds or more after the broadcast, and
+// six lookups in a row that fail. They are different facts with different
+// messages, so each is driven to its own.
+//
+// Both wait in real time, about a minute each. The wait reads the popup's own
+// clock and its own ten-second timer. Playwright's clock would move both, but
+// it is installed on the whole browser context and cannot be removed, so every
+// later test would run on it. Moving the stored broadcast time back instead can
+// be undone by the save the popup makes every ten seconds.
+
+// Send ETH from the address screen and stop on the wait for its receipt.
+async function sendEthToWait(env) {
+    await goToConfirm(env.page, {
+        token: "ETH",
+        balance: FUNDED_ETH_TEXT + " ETH",
+        amount: COMFORTABLE_AMOUNT,
+    });
+    await waitForEstimate(env.page);
+    await fillPasswordAndSend(env.page);
+    await visible(env.page, "#view-wait-tx", 60000);
+}
+
+test("a wait still without a receipt after 60 seconds ends on the timeout message (#315)", async (env) => {
+    try {
+        await sendEthToWait(env);
+        // Lookups run every ten seconds and answer "no receipt", so the one
+        // that ends the wait comes about 60 seconds after the broadcast.
+        await visible(env.page, "#view-error-tx", 90000);
+        const message = (
+            await env.page.locator("#error-tx-message").innerText()
+        ).trim();
+        assert(
+            message ===
+                "Transaction was not confirmed within 60 seconds. It may still confirm later — check Etherscan.",
+            "the wait did not end on the timeout message: " +
+                JSON.stringify(message),
+        );
+        await env.page.click("#btn-error-tx-done");
+        await visible(env.page, "#view-address");
+    } finally {
+        await backToAddressAfterSend(env);
+    }
+});
+
+test("six failed receipt lookups in a row end on the unreachable-network message (#315)", async (env) => {
+    // Each failed lookup is logged through log.errorf, i.e. console.error.
+    // Exactly six are declared: a wait that ended sooner leaves one unmatched,
+    // and one that went on logs a seventh, and either fails this test.
+    for (let i = 1; i <= 6; i++) {
+        env.errors.expect(
+            "failed receipt lookup " + i + " of 6",
+            /poll receipt failed/,
+        );
+    }
+    env.routeOpts.failReceiptLookup = true;
+    try {
+        await sendEthToWait(env);
+        await visible(env.page, "#view-error-tx", 90000);
+        const message = (
+            await env.page.locator("#error-tx-message").innerText()
+        ).trim();
+        assert(
+            message ===
+                "The network could not be reached to check this transaction — 6 lookups failed in a row. Check the RPC URL in Settings. The transaction may still have confirmed — check Etherscan.",
+            "the wait did not end on the unreachable-network message: " +
+                JSON.stringify(message),
+        );
+        await env.page.click("#btn-error-tx-done");
+        await visible(env.page, "#view-address");
+    } finally {
+        env.routeOpts.failReceiptLookup = false;
+        await backToAddressAfterSend(env);
+    }
+});
+
 // ------------------------------------------- hostile token symbol (#307)
 //
 // The reproduction from the issue, in the real browser against the real
@@ -4038,6 +4525,10 @@ async function main() {
         ethBalanceWei: null,
         failGasEstimate: false,
         holdGasEstimate: false,
+        // Whether Blockscout requests are held unanswered, and whether an
+        // address's transaction list fails as a network error (#218).
+        holdBlockscout: false,
+        failTransactionList: false,
         // What decimals() answers for the stub token, when it is to answer
         // something other than the value the same fixture reports through
         // Blockscout. The token that lies about its scale (#305).
@@ -4048,6 +4539,8 @@ async function main() {
         // Whether eth_getTransactionReceipt confirms a transaction rather than
         // answering "not mined yet".
         seedReceipt: false,
+        // Whether eth_getTransactionReceipt fails instead of answering (#315).
+        failReceiptLookup: false,
         // Every raw signed transaction handed to eth_sendRawTransaction, in
         // order. The dApp transaction round trip asserts against these bytes
         // rather than against anything the extension reported about them.
@@ -4080,6 +4573,9 @@ async function main() {
         // The recovery phrase of the wallet created in test 2, so later
         // tests can assert on the real secret rather than its shape.
         phrase: null,
+        // The private key of the key wallet imported by the recovery phrase
+        // tests (#161), asserted on by the private key export tests (#253).
+        privateKey: null,
         // What the Settings section (#229) actually observed. A guard test
         // at the end of that section demands the full set, so a skipped or
         // silently shortened assertion reddens the run instead of shrinking

tests/htmlEscape.test.js

@@ -91,6 +91,17 @@ describe("displaySymbol", () => {
         expect(displaySymbol(exact)).toBe(exact);
     });
 
+    // An emoji outside the Basic Multilingual Plane is two UTF-16 units.
+    // Cutting between them leaves half of one, which renders as U+FFFD.
+    test("counts an emoji as one character and never cuts one in half", () => {
+        expect(displaySymbol("🚀".repeat(MAX_SYMBOL_LENGTH))).toBe(
+            "🚀".repeat(MAX_SYMBOL_LENGTH),
+        );
+        expect(displaySymbol("🚀".repeat(20))).toBe(
+            "🚀".repeat(MAX_SYMBOL_LENGTH - 1) + "…",
+        );
+    });
+
     test("substitutes a placeholder for an absent symbol", () => {
         expect(displaySymbol("")).toBe(UNKNOWN_SYMBOL);
         expect(displaySymbol(null)).toBe(UNKNOWN_SYMBOL);

tests/manifest.test.js

@@ -21,15 +21,14 @@
 // escaping in src/shared/html.js is the primary fix; default-src is what
 // stops the next escape that slips from reaching the network.
 //
-// Every directive below is pinned exactly, because each of the four
+// And for #328: style-src is 'self' alone, so the browser refuses every
+// style="..." attribute in the popup's markup, including one an escape lets
+// through. The popup styles with classes; script setting element.style is
+// not affected.
+//
+// Every directive below is pinned exactly, because each of the three
 // loosenings is load-bearing and none of them may grow:
 //
-//   style-src 'unsafe-inline'  src/popup/index.html and the view helpers
-//                              use style="..." attributes throughout, which
-//                              CSP blocks without it. Chrome enforces this
-//                              on attributes, not just <style> blocks, and
-//                              Firefox has never implemented style-src-attr,
-//                              so there is no narrower spelling available.
 //   img-src data:              blockies are data: PNGs assigned to img.src.
 //   connect-src https: http:   the RPC endpoint is user-configurable, and a
 //                              local node over http://127.0.0.1 is a
@@ -58,7 +57,7 @@ const EXPECTED_DIRECTIVES = {
     "default-src": ["'self'"],
     "script-src": ["'self'", "'wasm-unsafe-eval'"],
     "object-src": ["'self'"],
-    "style-src": ["'self'", "'unsafe-inline'"],
+    "style-src": ["'self'"],
     "img-src": ["'self'", "data:"],
     "connect-src": ["'self'", "http:", "https:"],
     "frame-src": ["'none'"],

tests/proxyMethods.test.js

@@ -0,0 +1,89 @@
+// Every method in PROXY_METHODS is sent to the RPC node.
+//
+// handleRpc answers some methods itself before it reaches its proxy branch. A
+// method listed in PROXY_METHODS but answered earlier never reaches the node,
+// so the list would name a method that is not proxied
+// (https://git.eeqj.de/sneak/AutistMask/issues/326). Each method is sent from
+// a page here and must come back with what the node answered.
+
+const { makeStorageStub } = require("./support/storageStub");
+
+async function settle() {
+    for (let i = 0; i < 50; i++) await Promise.resolve();
+}
+
+afterEach(() => {
+    delete global.chrome;
+    delete global.fetch;
+});
+
+test("every method in PROXY_METHODS reaches the RPC node", async () => {
+    jest.resetModules();
+
+    jest.doMock("../src/shared/balances", () => ({
+        getProvider: () => ({}),
+        refreshBalances: jest.fn(async () => {}),
+    }));
+    jest.doMock("../src/shared/phishingDomains", () => ({
+        isPhishingDomain: () => false,
+    }));
+    jest.doMock("../src/shared/alarms", () => ({
+        BALANCE_REFRESH_ALARM: "balance",
+        BALANCE_REFRESH_PERIOD_MINUTES: 1,
+        ensureRecurringAlarms: jest.fn(async () => {}),
+        registerAlarmHandlers: jest.fn(),
+    }));
+
+    // The node answers each method with a value naming that method.
+    global.fetch = jest.fn(async (url, opts) => ({
+        status: 200,
+        json: async () => ({
+            jsonrpc: "2.0",
+            id: 1,
+            result: "node answered " + JSON.parse(opts.body).method,
+        }),
+    }));
+
+    let messageListener = null;
+    global.chrome = {
+        storage: makeStorageStub({
+            autistmask: {
+                networkId: "mainnet",
+                wallets: [],
+                allowedSites: {},
+                deniedSites: {},
+            },
+        }),
+        runtime: {
+            getURL: (path) => "chrome-extension://autistmask/" + path,
+            onMessage: {
+                addListener: (fn) => {
+                    messageListener = fn;
+                },
+            },
+            onConnect: { addListener: () => {} },
+            lastError: null,
+        },
+        windows: { onRemoved: { addListener: () => {} } },
+        action: { setPopup: () => {} },
+    };
+
+    const { PROXY_METHODS } = require("../src/background/index");
+
+    const answers = {};
+    const expected = {};
+    for (const method of PROXY_METHODS) {
+        messageListener(
+            { type: "AUTISTMASK_RPC", method, params: [] },
+            { origin: "https://dapp.example" },
+            (r) => {
+                answers[method] = r;
+            },
+        );
+        await settle();
+        expected[method] = { result: "node answered " + method };
+    }
+
+    expect(PROXY_METHODS.length).toBeGreaterThan(0);
+    expect(answers).toEqual(expected);
+});

tests/walletDefects.test.js

@@ -4,8 +4,16 @@
 // already in storage: the import that created it ran before the refusal
 // existed. Such a wallet used to sign for the wrong tree and now throws on the
 // send screen instead. These tests pin down that it is named and explained in
-// the wallet list, that nothing on the way there throws, and that a wallet
+// the wallet list, that every control leading to a signature or to the private
-// imported from a real master key is untouched by any of it.
+// key refuses it before asking for a password, that nothing on the way there
+// throws, and that a wallet imported from a real master key is untouched by
+// any of it.
+
+// Mocked so that no password has to be hashed: the controls below are checked
+// for whether they decrypt at all.
+jest.mock("../src/shared/vault", () => ({
+    decryptWithPassword: jest.fn(),
+}));
 
 const { HDNodeWallet, Mnemonic } = require("ethers");
 
@@ -237,6 +245,290 @@ describe("the wallet list", () => {
     });
 });
 
+// A minimal DOM for driving the popup views: any element exists on first
+// lookup, and click() runs the listeners a view attached to it.
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        title: "",
+        value: "",
+        innerHTML: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        listeners: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: (n, force) => {
+                const on = force === undefined ? !classes.has(n) : force;
+                if (on) classes.add(n);
+                else classes.delete(n);
+                return on;
+            },
+        },
+        addEventListener: (name, fn) => {
+            el.listeners[name] = el.listeners[name] || [];
+            el.listeners[name].push(fn);
+        },
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        addEventListener: () => {},
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+function click(id) {
+    return Promise.all((node(id).listeners.click || []).map((fn) => fn()));
+}
+
+// getSignerForAddress refuses this wallet's key, but only once the password
+// has been typed and spent, and the screens report that refusal as a wrong
+// password or a failed send. So every control that leads to it refuses first.
+describe("every way to a signature or the private key refuses a defective wallet first", () => {
+    const RECIPIENT = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+
+    let state;
+    let decryptWithPassword;
+    let home;
+    let addressDetail;
+    let addressToken;
+    let approval;
+    let confirmTx;
+
+    let address;
+    let shortMessage;
+    // What the background answers when the approval window asks which
+    // approval it was opened for, and every message the popup sent it.
+    let approvalDetails;
+    let sent;
+
+    beforeAll(() => {
+        state = require("../src/shared/state").state;
+        decryptWithPassword =
+            require("../src/shared/vault").decryptWithPassword;
+        home = require("../src/popup/views/home");
+        addressDetail = require("../src/popup/views/addressDetail");
+        addressToken = require("../src/popup/views/addressToken");
+        approval = require("../src/popup/views/approval");
+        confirmTx = require("../src/popup/views/confirmTx");
+    });
+
+    beforeEach(() => {
+        const broken = brokenXprvWallet();
+        // A balance, so that no Send button's zero-balance refusal can stand
+        // in for the defect check.
+        broken.addresses[0].balance = "1.0000";
+        broken.addresses[0].tokenBalances = [];
+        address = broken.addresses[0].address;
+        shortMessage = walletDefect(broken).shortMessage;
+
+        approvalDetails = null;
+        sent = [];
+        globalThis.document = makeDocument();
+        globalThis.window = { close: () => {} };
+        globalThis.chrome = {
+            storage: { local: { get: async () => ({}), set: async () => {} } },
+            runtime: {
+                connect: () => ({ postMessage: () => {} }),
+                sendMessage: (msg, reply) => {
+                    sent.push(msg);
+                    if (!reply) return;
+                    reply(
+                        msg.type === "AUTISTMASK_GET_APPROVAL"
+                            ? approvalDetails
+                            : null,
+                    );
+                },
+            },
+        };
+        // What the wallet's stored secret decrypts to: the account-level key
+        // it was imported from.
+        decryptWithPassword.mockReset();
+        decryptWithPassword.mockResolvedValue(accountXprv(VECTOR_PHRASE));
+
+        state.wallets = [broken];
+        state.activeAddress = address;
+        state.selectedWallet = 0;
+        state.selectedAddress = 0;
+        state.selectedToken = "ETH";
+        state.viewStack = [];
+    });
+
+    afterEach(() => {
+        state.wallets = [];
+        state.activeAddress = null;
+        state.selectedWallet = null;
+        state.selectedAddress = null;
+        state.selectedToken = null;
+    });
+
+    test("Send on the main screen", async () => {
+        state.currentView = "main";
+        home.init({});
+
+        await click("btn-main-send");
+
+        expect(node("flash-msg").textContent).toBe(shortMessage);
+        expect(state.currentView).toBe("main");
+    });
+
+    test("Send on the address screen", async () => {
+        state.currentView = "address";
+        addressDetail.init({});
+
+        await click("btn-send");
+
+        expect(node("flash-msg").textContent).toBe(shortMessage);
+        expect(state.currentView).toBe("address");
+    });
+
+    test("Export Private Key on the address screen", async () => {
+        state.currentView = "address";
+        addressDetail.init({});
+
+        await click("btn-export-privkey");
+
+        expect(node("flash-msg").textContent).toBe(shortMessage);
+        expect(state.currentView).toBe("address");
+    });
+
+    test("Send on a token's screen", async () => {
+        state.currentView = "address-token";
+        addressToken.init({});
+
+        await click("btn-address-token-send");
+
+        expect(node("flash-msg").textContent).toBe(shortMessage);
+        expect(state.currentView).toBe("address-token");
+    });
+
+    // The popup reopens onto this screen from a saved view, so the Send
+    // buttons above are not the only way onto it. The screen is not drawn,
+    // because drawing it starts a fee estimate against the network; with a
+    // decrypt that fails, a handler without the check stops at the password
+    // instead of going on to a transaction that was never set up.
+    test("Send on the confirmation screen", async () => {
+        decryptWithPassword.mockRejectedValue(new Error("wrong password"));
+        state.currentView = "confirm-tx";
+        confirmTx.init({});
+        node("confirm-tx-password").value = "any password";
+
+        await click("btn-confirm-send");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(node("confirm-tx-password-error").textContent).toBe(
+            shortMessage,
+        );
+    });
+
+    async function openTxApproval() {
+        approvalDetails = {
+            type: "tx",
+            origin: "https://dapp.example",
+            isPhishingDomain: false,
+            approvedFrom: address,
+            approvedTx: {
+                from: address,
+                to: RECIPIENT,
+                value: "0x0",
+                data: "0x",
+                chainId: 1,
+                nonce: 0,
+                gasLimit: "21000",
+                maxFeePerGas: "1000000000",
+            },
+        };
+        approval.init({});
+        await approval.show(1);
+    }
+
+    async function openSignApproval() {
+        approvalDetails = {
+            type: "sign",
+            origin: "https://dapp.example",
+            isPhishingDomain: false,
+            approvedFrom: address,
+            // "Hello", as the hex a page sends.
+            signParams: {
+                method: "personal_sign",
+                message: "0x48656c6c6f",
+                from: address,
+            },
+        };
+        approval.init({});
+        await approval.show(1);
+    }
+
+    test("the transaction approval screen says so and disables Approve", async () => {
+        await openTxApproval();
+
+        expect(node("approve-tx-error").textContent).toBe(shortMessage);
+        expect(node("btn-approve-tx").disabled).toBe(true);
+    });
+
+    // The stub runs a disabled button's listener, which a browser would not:
+    // what is asked here is whether the handler refuses on its own.
+    test("Approve on the transaction approval screen does not decrypt", async () => {
+        await openTxApproval();
+        node("approve-tx-password").value = "any password";
+
+        await click("btn-approve-tx");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(sent.map((msg) => msg.type)).not.toContain(
+            "AUTISTMASK_TX_RESPONSE",
+        );
+        expect(node("approve-tx-error").textContent).toBe(shortMessage);
+    });
+
+    test("the signature approval screen says so and disables Approve", async () => {
+        await openSignApproval();
+
+        expect(node("approve-sign-error").textContent).toBe(shortMessage);
+        expect(node("btn-approve-sign").disabled).toBe(true);
+    });
+
+    test("Approve on the signature approval screen does not decrypt", async () => {
+        await openSignApproval();
+        node("approve-sign-password").value = "any password";
+
+        await click("btn-approve-sign");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(sent.map((msg) => msg.type)).not.toContain(
+            "AUTISTMASK_SIGN_RESPONSE",
+        );
+        expect(node("approve-sign-error").textContent).toBe(shortMessage);
+    });
+});
+
 describe("no path throws an unhandled error for a defective wallet", () => {
     test("address derivation from the stored xpub still works", () => {
         // The stored xpub is at a non-standard depth but is a valid extended

yarn.lock

@@ -275,7 +275,15 @@
   resolved "https://registry.npmjs.org/@bcoe/v8-coverage/-/v8-coverage-0.2.3.tgz"
   integrity sha512-0hYQ8SB4Db5zvZB4axdMHGwEaQjkZzFjQiN9LVYvIFB2nSUHW9tYpxWriPrWDASIxiaXax83REcLxuSdnGPZtw==
 
-"@emnapi/core@^1.4.3", "@emnapi/core@^1.7.1", "@emnapi/core@^1.8.1":
+"@emnapi/core@^1.10.0":
+  version "1.11.3"
+  resolved "https://registry.yarnpkg.com/@emnapi/core/-/core-1.11.3.tgz#5e95348a42cd1e06f0b9aa380cd74091daa4d520"
+  integrity sha512-zLpS5asjEb7lq8jYLq37N6XKaE41DIexlY1rF/z4/tIl3wo13Sqm28fRyfIsKZD+NZ8mM5RoKkpW/rBcuoSZSg==
+  dependencies:
+    "@emnapi/wasi-threads" "1.2.3"
+    tslib "^2.4.0"
+
+"@emnapi/core@^1.4.3":
   version "1.8.1"
   resolved "https://registry.yarnpkg.com/@emnapi/core/-/core-1.8.1.tgz#fd9efe721a616288345ffee17a1f26ac5dd01349"
   integrity sha512-AvT9QFpxK0Zd8J0jopedNm+w/2fIzvtPKPjqyw9jwvBaReTTqPBk9Hixaz7KbjimP+QNz605/XnjFcDAL2pqBg==
@@ -283,20 +291,34 @@
     "@emnapi/wasi-threads" "1.1.0"
     tslib "^2.4.0"
 
-"@emnapi/runtime@^1.4.3", "@emnapi/runtime@^1.7.1", "@emnapi/runtime@^1.8.1":
+"@emnapi/runtime@^1.10.0":
+  version "1.11.3"
+  resolved "https://registry.yarnpkg.com/@emnapi/runtime/-/runtime-1.11.3.tgz#84257ae3b0531eb2aec1ffa23d70700da007ba95"
+  integrity sha512-Xz4Tpyki7XyrpbUK1jR1AhdAdaXyhhY4lZ3neLodmhpuWfy2PAQN5B46sAiU4liOXGLkHypn/qU+jvfWSCYYLA==
+  dependencies:
+    tslib "^2.4.0"
+
+"@emnapi/runtime@^1.4.3":
   version "1.8.1"
   resolved "https://registry.yarnpkg.com/@emnapi/runtime/-/runtime-1.8.1.tgz#550fa7e3c0d49c5fb175a116e8cd70614f9a22a5"
   integrity sha512-mehfKSMWjjNol8659Z8KxEMrdSJDDot5SXMq00dM8BN4o+CLNXQ0xH2V7EchNHV4RmbZLmmPdEaXZc5H2FXmDg==
   dependencies:
     tslib "^2.4.0"
 
-"@emnapi/wasi-threads@1.1.0", "@emnapi/wasi-threads@^1.1.0":
+"@emnapi/wasi-threads@1.1.0":
   version "1.1.0"
   resolved "https://registry.npmjs.org/@emnapi/wasi-threads/-/wasi-threads-1.1.0.tgz"
   integrity sha512-WI0DdZ8xFSbgMjR1sFsKABJ/C5OnRrjT06JXbZKexJGrDuPTzZdDYfFlsgcCXCyf+suG5QU2e/y1Wo2V/OapLQ==
   dependencies:
     tslib "^2.4.0"
 
+"@emnapi/wasi-threads@1.2.3", "@emnapi/wasi-threads@^1.2.1":
+  version "1.2.3"
+  resolved "https://registry.yarnpkg.com/@emnapi/wasi-threads/-/wasi-threads-1.2.3.tgz#c9bf72fd4be5b928aee894820e8d814ed73916e9"
+  integrity sha512-ELEBe8PsLvvJ6QMr0zLt8ffvOHW/dc1m3CEzNMg7aJUv3bMaoDtw2TXyDAwkYBuroxxuHEwhRTLJSe5sya547g==
+  dependencies:
+    tslib "^2.4.0"
+
 "@esbuild/aix-ppc64@0.27.3":
   version "0.27.3"
   resolved "https://registry.yarnpkg.com/@esbuild/aix-ppc64/-/aix-ppc64-0.27.3.tgz#815b39267f9bffd3407ea6c376ac32946e24f8d2"
@@ -802,14 +824,12 @@
     "@emnapi/runtime" "^1.4.3"
     "@tybys/wasm-util" "^0.10.0"
 
-"@napi-rs/wasm-runtime@^1.1.1":
+"@napi-rs/wasm-runtime@^1.1.4":
-  version "1.1.1"
+  version "1.2.5"
-  resolved "https://registry.yarnpkg.com/@napi-rs/wasm-runtime/-/wasm-runtime-1.1.1.tgz#c3705ab549d176b8dc5172723d6156c3dc426af2"
+  resolved "https://registry.yarnpkg.com/@napi-rs/wasm-runtime/-/wasm-runtime-1.2.5.tgz#8c728c07e2543d80e55ccb34158c4ae9d6bd13e8"
-  integrity sha512-p64ah1M1ld8xjWv3qbvFwHiFVWrq1yFvV4f7w+mzaqiR4IlSgkqhcRdHwsGgomwzBH51sRY4NEowLxnaBjcW/A==
+  integrity sha512-HshSvXzmBxNzqejd3k/KemgQ3hdREUYFRRrgxOZ+gPljDIsO2SDZrVZMd4Z/HsxudQbE62OVyVFE8z9BCurfjA==
   dependencies:
-    "@emnapi/core" "^1.7.1"
+    "@tybys/wasm-util" "^0.10.3"
-    "@emnapi/runtime" "^1.7.1"
-    "@tybys/wasm-util" "^0.10.1"
 
 "@noble/curves@1.2.0":
   version "1.2.0"
@@ -823,94 +843,94 @@
   resolved "https://registry.npmjs.org/@noble/hashes/-/hashes-1.3.2.tgz"
   integrity sha512-MVC8EAQp7MvEcm30KWENFjgR+Mkmf+D189XJTkFIlwohU5hcBbn1ZkKq7KVTi2Hme3PMGF390DaL52beVrIihQ==
 
-"@parcel/watcher-android-arm64@2.5.6":
+"@parcel/watcher-android-arm64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-android-arm64/-/watcher-android-arm64-2.5.6.tgz#5f32e0dba356f4ac9a11068d2a5c134ca3ba6564"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-android-arm64/-/watcher-android-arm64-2.5.1.tgz#507f836d7e2042f798c7d07ad19c3546f9848ac1"
-  integrity sha512-YQxSS34tPF/6ZG7r/Ih9xy+kP/WwediEUsqmtf0cuCV5TPPKw/PQHRhueUo6JdeFJaqV3pyjm0GdYjZotbRt/A==
+  integrity sha512-KF8+j9nNbUN8vzOFDpRMsaKBHZ/mcjEjMToVMJOhTozkDonQFFrRcfdLWn6yWKCmJKmdVxSgHiYvTCef4/qcBA==
 
-"@parcel/watcher-darwin-arm64@2.5.6":
+"@parcel/watcher-darwin-arm64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.npmjs.org/@parcel/watcher-darwin-arm64/-/watcher-darwin-arm64-2.5.6.tgz"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-darwin-arm64/-/watcher-darwin-arm64-2.5.1.tgz#3d26dce38de6590ef79c47ec2c55793c06ad4f67"
-  integrity sha512-Z2ZdrnwyXvvvdtRHLmM4knydIdU9adO3D4n/0cVipF3rRiwP+3/sfzpAwA/qKFL6i1ModaabkU7IbpeMBgiVEA==
+  integrity sha512-eAzPv5osDmZyBhou8PoF4i6RQXAfeKL9tjb3QzYuccXFMQU0ruIc/POh30ePnaOyD1UXdlKguHBmsTs53tVoPw==
 
-"@parcel/watcher-darwin-x64@2.5.6":
+"@parcel/watcher-darwin-x64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-darwin-x64/-/watcher-darwin-x64-2.5.6.tgz#bf05d76a78bc15974f15ec3671848698b0838063"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-darwin-x64/-/watcher-darwin-x64-2.5.1.tgz#99f3af3869069ccf774e4ddfccf7e64fd2311ef8"
-  integrity sha512-HgvOf3W9dhithcwOWX9uDZyn1lW9R+7tPZ4sug+NGrGIo4Rk1hAXLEbcH1TQSqxts0NYXXlOWqVpvS1SFS4fRg==
+  integrity sha512-1ZXDthrnNmwv10A0/3AJNZ9JGlzrF82i3gNQcWOzd7nJ8aj+ILyW1MTxVk35Db0u91oD5Nlk9MBiujMlwmeXZg==
 
-"@parcel/watcher-freebsd-x64@2.5.6":
+"@parcel/watcher-freebsd-x64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-freebsd-x64/-/watcher-freebsd-x64-2.5.6.tgz#8bc26e9848e7303ac82922a5ae1b1ef1bdb48a53"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-freebsd-x64/-/watcher-freebsd-x64-2.5.1.tgz#14d6857741a9f51dfe51d5b08b7c8afdbc73ad9b"
-  integrity sha512-vJVi8yd/qzJxEKHkeemh7w3YAn6RJCtYlE4HPMoVnCpIXEzSrxErBW5SJBgKLbXU3WdIpkjBTeUNtyBVn8TRng==
+  integrity sha512-SI4eljM7Flp9yPuKi8W0ird8TI/JK6CSxju3NojVI6BjHsTyK7zxA9urjVjEKJ5MBYC+bLmMcbAWlZ+rFkLpJQ==
 
-"@parcel/watcher-linux-arm-glibc@2.5.6":
+"@parcel/watcher-linux-arm-glibc@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm-glibc/-/watcher-linux-arm-glibc-2.5.6.tgz#1328fee1deb0c2d7865079ef53a2ba4cc2f8b40a"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm-glibc/-/watcher-linux-arm-glibc-2.5.1.tgz#43c3246d6892381db473bb4f663229ad20b609a1"
-  integrity sha512-9JiYfB6h6BgV50CCfasfLf/uvOcJskMSwcdH1PHH9rvS1IrNy8zad6IUVPVUfmXr+u+Km9IxcfMLzgdOudz9EQ==
+  integrity sha512-RCdZlEyTs8geyBkkcnPWvtXLY44BCeZKmGYRtSgtwwnHR4dxfHRG3gR99XdMEdQ7KeiDdasJwwvNSF5jKtDwdA==
 
-"@parcel/watcher-linux-arm-musl@2.5.6":
+"@parcel/watcher-linux-arm-musl@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm-musl/-/watcher-linux-arm-musl-2.5.6.tgz#bad0f45cb3e2157746db8b9d22db6a125711f152"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm-musl/-/watcher-linux-arm-musl-2.5.1.tgz#663750f7090bb6278d2210de643eb8a3f780d08e"
-  integrity sha512-Ve3gUCG57nuUUSyjBq/MAM0CzArtuIOxsBdQ+ftz6ho8n7s1i9E1Nmk/xmP323r2YL0SONs1EuwqBp2u1k5fxg==
+  integrity sha512-6E+m/Mm1t1yhB8X412stiKFG3XykmgdIOqhjWj+VL8oHkKABfu/gjFj8DvLrYVHSBNC+/u5PeNrujiSQ1zwd1Q==
 
-"@parcel/watcher-linux-arm64-glibc@2.5.6":
+"@parcel/watcher-linux-arm64-glibc@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm64-glibc/-/watcher-linux-arm64-glibc-2.5.6.tgz#b75913fbd501d9523c5f35d420957bf7d0204809"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm64-glibc/-/watcher-linux-arm64-glibc-2.5.1.tgz#ba60e1f56977f7e47cd7e31ad65d15fdcbd07e30"
-  integrity sha512-f2g/DT3NhGPdBmMWYoxixqYr3v/UXcmLOYy16Bx0TM20Tchduwr4EaCbmxh1321TABqPGDpS8D/ggOTaljijOA==
+  integrity sha512-LrGp+f02yU3BN9A+DGuY3v3bmnFUggAITBGriZHUREfNEzZh/GO06FF5u2kx8x+GBEUYfyTGamol4j3m9ANe8w==
 
-"@parcel/watcher-linux-arm64-musl@2.5.6":
+"@parcel/watcher-linux-arm64-musl@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm64-musl/-/watcher-linux-arm64-musl-2.5.6.tgz#da5621a6a576070c8c0de60dea8b46dc9c3827d4"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-arm64-musl/-/watcher-linux-arm64-musl-2.5.1.tgz#f7fbcdff2f04c526f96eac01f97419a6a99855d2"
-  integrity sha512-qb6naMDGlbCwdhLj6hgoVKJl2odL34z2sqkC7Z6kzir8b5W65WYDpLB6R06KabvZdgoHI/zxke4b3zR0wAbDTA==
+  integrity sha512-cFOjABi92pMYRXS7AcQv9/M1YuKRw8SZniCDw0ssQb/noPkRzA+HBDkwmyOJYp5wXcsTrhxO0zq1U11cK9jsFg==
 
-"@parcel/watcher-linux-x64-glibc@2.5.6":
+"@parcel/watcher-linux-x64-glibc@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-x64-glibc/-/watcher-linux-x64-glibc-2.5.6.tgz#ce437accdc4b30f93a090b4a221fd95cd9b89639"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-x64-glibc/-/watcher-linux-x64-glibc-2.5.1.tgz#4d2ea0f633eb1917d83d483392ce6181b6a92e4e"
-  integrity sha512-kbT5wvNQlx7NaGjzPFu8nVIW1rWqV780O7ZtkjuWaPUgpv2NMFpjYERVi0UYj1msZNyCzGlaCWEtzc+exjMGbQ==
+  integrity sha512-GcESn8NZySmfwlTsIur+49yDqSny2IhPeZfXunQi48DMugKeZ7uy1FX83pO0X22sHntJ4Ub+9k34XQCX+oHt2A==
 
-"@parcel/watcher-linux-x64-musl@2.5.6":
+"@parcel/watcher-linux-x64-musl@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-x64-musl/-/watcher-linux-x64-musl-2.5.6.tgz#02400c54b4a67efcc7e2327b249711920ac969e2"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-linux-x64-musl/-/watcher-linux-x64-musl-2.5.1.tgz#277b346b05db54f55657301dd77bdf99d63606ee"
-  integrity sha512-1JRFeC+h7RdXwldHzTsmdtYR/Ku8SylLgTU/reMuqdVD7CtLwf0VR1FqeprZ0eHQkO0vqsbvFLXUmYm/uNKJBg==
+  integrity sha512-n0E2EQbatQ3bXhcH2D1XIAANAcTZkQICBPVaxMeaCVBtOpBZpWJuf7LwyWPSBDITb7In8mqQgJ7gH8CILCURXg==
 
-"@parcel/watcher-win32-arm64@2.5.6":
+"@parcel/watcher-win32-arm64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-arm64/-/watcher-win32-arm64-2.5.6.tgz#caae3d3c7583ca0a7171e6bd142c34d20ea1691e"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-arm64/-/watcher-win32-arm64-2.5.1.tgz#7e9e02a26784d47503de1d10e8eab6cceb524243"
-  integrity sha512-3ukyebjc6eGlw9yRt678DxVF7rjXatWiHvTXqphZLvo7aC5NdEgFufVwjFfY51ijYEWpXbqF5jtrK275z52D4Q==
+  integrity sha512-RFzklRvmc3PkjKjry3hLF9wD7ppR4AKcWNzH7kXR7GUe0Igb3Nz8fyPwtZCSquGrhU5HhUNDr/mKBqj7tqA2Vw==
 
-"@parcel/watcher-win32-ia32@2.5.6":
+"@parcel/watcher-win32-ia32@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-ia32/-/watcher-win32-ia32-2.5.6.tgz#9ac922550896dfe47bfc5ae3be4f1bcaf8155d6d"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-ia32/-/watcher-win32-ia32-2.5.1.tgz#2d0f94fa59a873cdc584bf7f6b1dc628ddf976e6"
-  integrity sha512-k35yLp1ZMwwee3Ez/pxBi5cf4AoBKYXj00CZ80jUz5h8prpiaQsiRPKQMxoLstNuqe2vR4RNPEAEcjEFzhEz/g==
+  integrity sha512-c2KkcVN+NJmuA7CGlaGD1qJh1cLfDnQsHjE89E60vUEMlqduHGCdCLJCID5geFVM0dOtA3ZiIO8BoEQmzQVfpQ==
 
-"@parcel/watcher-win32-x64@2.5.6":
+"@parcel/watcher-win32-x64@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-x64/-/watcher-win32-x64-2.5.6.tgz#73fdafba2e21c448f0e456bbe13178d8fe11739d"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher-win32-x64/-/watcher-win32-x64-2.5.1.tgz#ae52693259664ba6f2228fa61d7ee44b64ea0947"
-  integrity sha512-hbQlYcCq5dlAX9Qx+kFb0FHue6vbjlf0FrNzSKdYK2APUf7tGfGxQCk2ihEREmbR6ZMc0MVAD5RIX/41gpUzTw==
+  integrity sha512-9lHBdJITeNR++EvSQVUcaZoWupyHfXe1jZvGZ06O/5MflPcuPLtEphScIBL+AiCWBO46tDSHzWyD0uDmmZqsgA==
 
-"@parcel/watcher@^2.5.1":
+"@parcel/watcher@2.5.1":
-  version "2.5.6"
+  version "2.5.1"
-  resolved "https://registry.npmjs.org/@parcel/watcher/-/watcher-2.5.6.tgz"
+  resolved "https://registry.yarnpkg.com/@parcel/watcher/-/watcher-2.5.1.tgz#342507a9cfaaf172479a882309def1e991fb1200"
-  integrity sha512-tmmZ3lQxAe/k/+rNnXQRawJ4NjxO2hqiOLTHvWchtGZULp4RyFeh6aU4XdOYBFe2KE1oShQTv4AblOs2iOrNnQ==
+  integrity sha512-dfUnCxiN9H4ap84DvD2ubjw+3vUNpstxa0TneY/Paat8a3R4uQZDLSvWjmznAY/DoahqTHl9V46HF/Zs3F29pg==
   dependencies:
-    detect-libc "^2.0.3"
+    detect-libc "^1.0.3"
     is-glob "^4.0.3"
+    micromatch "^4.0.5"
     node-addon-api "^7.0.0"
-    picomatch "^4.0.3"
   optionalDependencies:
-    "@parcel/watcher-android-arm64" "2.5.6"
+    "@parcel/watcher-android-arm64" "2.5.1"
-    "@parcel/watcher-darwin-arm64" "2.5.6"
+    "@parcel/watcher-darwin-arm64" "2.5.1"
-    "@parcel/watcher-darwin-x64" "2.5.6"
+    "@parcel/watcher-darwin-x64" "2.5.1"
-    "@parcel/watcher-freebsd-x64" "2.5.6"
+    "@parcel/watcher-freebsd-x64" "2.5.1"
-    "@parcel/watcher-linux-arm-glibc" "2.5.6"
+    "@parcel/watcher-linux-arm-glibc" "2.5.1"
-    "@parcel/watcher-linux-arm-musl" "2.5.6"
+    "@parcel/watcher-linux-arm-musl" "2.5.1"
-    "@parcel/watcher-linux-arm64-glibc" "2.5.6"
+    "@parcel/watcher-linux-arm64-glibc" "2.5.1"
-    "@parcel/watcher-linux-arm64-musl" "2.5.6"
+    "@parcel/watcher-linux-arm64-musl" "2.5.1"
-    "@parcel/watcher-linux-x64-glibc" "2.5.6"
+    "@parcel/watcher-linux-x64-glibc" "2.5.1"
-    "@parcel/watcher-linux-x64-musl" "2.5.6"
+    "@parcel/watcher-linux-x64-musl" "2.5.1"
-    "@parcel/watcher-win32-arm64" "2.5.6"
+    "@parcel/watcher-win32-arm64" "2.5.1"
-    "@parcel/watcher-win32-ia32" "2.5.6"
+    "@parcel/watcher-win32-ia32" "2.5.1"
-    "@parcel/watcher-win32-x64" "2.5.6"
+    "@parcel/watcher-win32-x64" "2.5.1"
 
 "@pkgjs/parseargs@^0.11.0":
   version "0.11.0"
@@ -941,124 +961,131 @@
   dependencies:
     "@sinonjs/commons" "^3.0.1"
 
-"@tailwindcss/cli@^4.2.1":
+"@tailwindcss/cli@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.npmjs.org/@tailwindcss/cli/-/cli-4.2.1.tgz"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/cli/-/cli-4.3.1.tgz#bc00e49e2b70baad223969071e4e380da7123afe"
-  integrity sha512-b7MGn51IA80oSG+7fuAgzfQ+7pZBgjzbqwmiv6NO7/+a1sev32cGqnwhscT7h0EcAvMa9r7gjRylqOH8Xhc4DA==
+  integrity sha512-ZWPy20rF+TBfTImxDMG3Wr75Y3RpaPlo9lc+oJbInlMyjT+XPkTVKVIL5RZ7JirXuIahcfHoLNFRmDorKi+JQQ==
   dependencies:
-    "@parcel/watcher" "^2.5.1"
+    "@parcel/watcher" "2.5.1"
-    "@tailwindcss/node" "4.2.1"
+    "@tailwindcss/node" "4.3.1"
-    "@tailwindcss/oxide" "4.2.1"
+    "@tailwindcss/oxide" "4.3.1"
-    enhanced-resolve "^5.19.0"
+    enhanced-resolve "5.21.6"
     mri "^1.2.0"
     picocolors "^1.1.1"
-    tailwindcss "4.2.1"
+    tailwindcss "4.3.1"
 
-"@tailwindcss/node@4.2.1":
+"@tailwindcss/node@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.npmjs.org/@tailwindcss/node/-/node-4.2.1.tgz"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/node/-/node-4.3.1.tgz#77402afcfa29c4b48b8494d0edfc4428d0a504ba"
-  integrity sha512-jlx6sLk4EOwO6hHe1oCGm1Q4AN/s0rSrTTPBGPM0/RQ6Uylwq17FuU8IeJJKEjtc6K6O07zsvP+gDO6MMWo7pg==
+  integrity sha512-6NDaqRoAMSXD1mr/RXu0HBvNE9a2n5tHPsxu9XHLws8o4Twes5rBM2205SUUiJ9goAtadrN6xTGX0UDEwp/N4A==
   dependencies:
     "@jridgewell/remapping" "^2.3.5"
-    enhanced-resolve "^5.19.0"
+    enhanced-resolve "5.21.6"
-    jiti "^2.6.1"
+    jiti "^2.7.0"
-    lightningcss "1.31.1"
+    lightningcss "1.32.0"
     magic-string "^0.30.21"
     source-map-js "^1.2.1"
-    tailwindcss "4.2.1"
+    tailwindcss "4.3.1"
 
-"@tailwindcss/oxide-android-arm64@4.2.1":
+"@tailwindcss/oxide-android-arm64@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-android-arm64/-/oxide-android-arm64-4.2.1.tgz#a7c24919b607e7f884e6ab97799d12c7fb5b47bd"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-android-arm64/-/oxide-android-arm64-4.3.1.tgz#83c6762cd383a2ebc6e01897b0f35f19225e6653"
-  integrity sha512-eZ7G1Zm5EC8OOKaesIKuw77jw++QJ2lL9N+dDpdQiAB/c/B2wDh0QPFHbkBVrXnwNugvrbJFk1gK2SsVjwWReg==
+  integrity sha512-SVlyf61g374l5cHyg8x9kf5xmLcOaxvOTsbsqDnSsDJaKOEFZ7GCvi84VAVGpxojYOs1+3K6M0UjXfqPU8vmOQ==
 
-"@tailwindcss/oxide-darwin-arm64@4.2.1":
+"@tailwindcss/oxide-darwin-arm64@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.npmjs.org/@tailwindcss/oxide-darwin-arm64/-/oxide-darwin-arm64-4.2.1.tgz"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-darwin-arm64/-/oxide-darwin-arm64-4.3.1.tgz#2558b7e835889ad721823e4dcb50dd5071d747d8"
-  integrity sha512-q/LHkOstoJ7pI1J0q6djesLzRvQSIfEto148ppAd+BVQK0JYjQIFSK3JgYZJa+Yzi0DDa52ZsQx2rqytBnf8Hw==
+  integrity sha512-hVnWLwv+e/l7c4WKyVtHVrIPvYdqWHjRB3MDIqARynzFtnQg85kmQEFCbV9Ja0VVx4xXTIiDWY60Y7iz/iNoDA==
 
-"@tailwindcss/oxide-darwin-x64@4.2.1":
+"@tailwindcss/oxide-darwin-x64@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-darwin-x64/-/oxide-darwin-x64-4.2.1.tgz#1e59ef0665f6cb9e658bf0ebcb3cb50f21b2c175"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-darwin-x64/-/oxide-darwin-x64-4.3.1.tgz#d987957b87a26668b6d0117ccd4a8a4d1a318a2b"
-  integrity sha512-/f/ozlaXGY6QLbpvd/kFTro2l18f7dHKpB+ieXz+Cijl4Mt9AI2rTrpq7V+t04nK+j9XBQHnSMdeQRhbGyt6fw==
+  integrity sha512-Cf7abu0WVgbhU7ANgPUnSAvm7nCvMweusHb8FnaHlLfv/Caq4GYaEZg7ZImzzmjx4lIAfuS8q+eLIS7A7IzxIg==
 
-"@tailwindcss/oxide-freebsd-x64@4.2.1":
+"@tailwindcss/oxide-freebsd-x64@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-freebsd-x64/-/oxide-freebsd-x64-4.2.1.tgz#6b0c75e9dac7f1a241cb9a5eaa89f0d9664835b6"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-freebsd-x64/-/oxide-freebsd-x64-4.3.1.tgz#75b342c81a07b1afa437976ec82f86d372431da7"
-  integrity sha512-5e/AkgYJT/cpbkys/OU2Ei2jdETCLlifwm7ogMC7/hksI2fC3iiq6OcXwjibcIjPung0kRtR3TxEITkqgn0TcA==
+  integrity sha512-ZZqzX2Y+GXtXXfqSfpJhDm60OoZfvLHLCgm+J7NVqgHHJjG/m9ugZI77RwTsVd4fnBJuCFP6Ae6kTJb71UdS8g==
 
-"@tailwindcss/oxide-linux-arm-gnueabihf@4.2.1":
+"@tailwindcss/oxide-linux-arm-gnueabihf@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm-gnueabihf/-/oxide-linux-arm-gnueabihf-4.2.1.tgz#717044d8fe746b1f0760485946c0c9a900174f7b"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm-gnueabihf/-/oxide-linux-arm-gnueabihf-4.3.1.tgz#6730adc6d17187eeeff2f14f6a914d009749cb97"
-  integrity sha512-Uny1EcVTTmerCKt/1ZuKTkb0x8ZaiuYucg2/kImO5A5Y/kBz41/+j0gxUZl+hTF3xkWpDmHX+TaWhOtba2Fyuw==
+  integrity sha512-/Ah/xik0LaMYfv9DZ0S/t4pBlBNYOcqtRwusjgovHkvT8ixueWCLyJjsaF5kQIckjb4IT8Q6K6p/iPmZMixYgg==
 
-"@tailwindcss/oxide-linux-arm64-gnu@4.2.1":
+"@tailwindcss/oxide-linux-arm64-gnu@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm64-gnu/-/oxide-linux-arm64-gnu-4.2.1.tgz#f544b0faf166d80791347911b2dd4372a893129d"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm64-gnu/-/oxide-linux-arm64-gnu-4.3.1.tgz#869d16b3d9bd8097b797a3dd876db0368c07eae3"
-  integrity sha512-CTrwomI+c7n6aSSQlsPL0roRiNMDQ/YzMD9EjcR+H4f0I1SQ8QqIuPnsVp7QgMkC1Qi8rtkekLkOFjo7OlEFRQ==
+  integrity sha512-gqdFoVJlw444GvpnheZLHmvTzSxI/cOUUh2KSNejQjTcYkW062SVD+En0rUgD+QV91bz1XGIGtt1HJd48xUGbQ==
 
-"@tailwindcss/oxide-linux-arm64-musl@4.2.1":
+"@tailwindcss/oxide-linux-arm64-musl@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm64-musl/-/oxide-linux-arm64-musl-4.2.1.tgz#9fbaf8dc00b858a2b955526abb15d88f5678d1ef"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-arm64-musl/-/oxide-linux-arm64-musl-4.3.1.tgz#ab110680ce3c7a2a135656db4402dffc1fb9c1d7"
-  integrity sha512-WZA0CHRL/SP1TRbA5mp9htsppSEkWuQ4KsSUumYQnyl8ZdT39ntwqmz4IUHGN6p4XdSlYfJwM4rRzZLShHsGAQ==
+  integrity sha512-Bwv9KwOvE0VKa86xPFif9b9c3Y1NxOV1P0gLti/IYaWEsQYZXDlxfGEtA8mdDZ7SG3wyNXAWYT5SIn3giL57oA==
 
-"@tailwindcss/oxide-linux-x64-gnu@4.2.1":
+"@tailwindcss/oxide-linux-x64-gnu@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-x64-gnu/-/oxide-linux-x64-gnu-4.2.1.tgz#6ab4e6b8d308d037a1155b8443df5941dbfa6aa1"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-x64-gnu/-/oxide-linux-x64-gnu-4.3.1.tgz#422a4175a76ae60dd9d17946eec3584cb636352f"
-  integrity sha512-qMFzxI2YlBOLW5PhblzuSWlWfwLHaneBE0xHzLrBgNtqN6mWfs+qYbhryGSXQjFYB1Dzf5w+LN5qbUTPhW7Y5g==
+  integrity sha512-Ymi8O8T15HYQdOUWUtTI6ldN0neHP85FC+Qz32xTcZ7iJXtem/x8ITev0o1e9e5rkqj4lONZfTRLvkmin1+tKg==
 
-"@tailwindcss/oxide-linux-x64-musl@4.2.1":
+"@tailwindcss/oxide-linux-x64-musl@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-x64-musl/-/oxide-linux-x64-musl-4.2.1.tgz#52c55593394dff85f1fa88172f69f8fdcde182b6"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-linux-x64-musl/-/oxide-linux-x64-musl-4.3.1.tgz#f4c714a653a0e742955d2af2c53d0064b4c500d1"
-  integrity sha512-5r1X2FKnCMUPlXTWRYpHdPYUY6a1Ar/t7P24OuiEdEOmms5lyqjDRvVY1yy9Rmioh+AunQ0rWiOTPE8F9A3v5g==
+  integrity sha512-M+P/91qJ6uILLw4k2G93GMDRAXj61SMvFQYt39AqvUqYgExXpLL5aepfns7sj4HiAQeolirQF9E0lzRvdf4zPQ==
 
-"@tailwindcss/oxide-wasm32-wasi@4.2.1":
+"@tailwindcss/oxide-wasm32-wasi@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-wasm32-wasi/-/oxide-wasm32-wasi-4.2.1.tgz#7401e35f881d3654b6180badd1243d75a2702ea5"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-wasm32-wasi/-/oxide-wasm32-wasi-4.3.1.tgz#32172ca8b2427b9c2bb09c97756960185b7d4fc0"
-  integrity sha512-MGFB5cVPvshR85MTJkEvqDUnuNoysrsRxd6vnk1Lf2tbiqNlXpHYZqkqOQalydienEWOHHFyyuTSYRsLfxFJ2Q==
+  integrity sha512-zsM8uOeqvVGHsAXsJxsT28ttosFahLJKCLOTUBqRAtKnVgGSRitds9T432QiT8b77Yga7JIBkulIRRlJPtYhRA==
   dependencies:
-    "@emnapi/core" "^1.8.1"
+    "@emnapi/core" "^1.10.0"
-    "@emnapi/runtime" "^1.8.1"
+    "@emnapi/runtime" "^1.10.0"
-    "@emnapi/wasi-threads" "^1.1.0"
+    "@emnapi/wasi-threads" "^1.2.1"
-    "@napi-rs/wasm-runtime" "^1.1.1"
+    "@napi-rs/wasm-runtime" "^1.1.4"
-    "@tybys/wasm-util" "^0.10.1"
+    "@tybys/wasm-util" "^0.10.2"
     tslib "^2.8.1"
 
-"@tailwindcss/oxide-win32-arm64-msvc@4.2.1":
+"@tailwindcss/oxide-win32-arm64-msvc@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-win32-arm64-msvc/-/oxide-win32-arm64-msvc-4.2.1.tgz#63a502e7b696dcd976aa356b94ce0f4f8f832c44"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-win32-arm64-msvc/-/oxide-win32-arm64-msvc-4.3.1.tgz#07a11b6eb1f578d012460e6ad6f2352a28d32514"
-  integrity sha512-YlUEHRHBGnCMh4Nj4GnqQyBtsshUPdiNroZj8VPkvTZSoHsilRCwXcVKnG9kyi0ZFAS/3u+qKHBdDc81SADTRA==
+  integrity sha512-aiNvSq9BsVk8V513lDKlrCFAgf8qBMPZTpgEhInL+NwQqs97mYmupVMrPrgBBSL8Pv/0zXu9MrMF9rMun1ZeNg==
 
-"@tailwindcss/oxide-win32-x64-msvc@4.2.1":
+"@tailwindcss/oxide-win32-x64-msvc@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-win32-x64-msvc/-/oxide-win32-x64-msvc-4.2.1.tgz#8cc59b28ebc4dc866c0c14d7057f07f0ed04c4a8"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide-win32-x64-msvc/-/oxide-win32-x64-msvc-4.3.1.tgz#60c6095d97b141c02de36bb52a16c358d9bdaa98"
-  integrity sha512-rbO34G5sMWWyrN/idLeVxAZgAKWrn5LiR3/I90Q9MkA67s6T1oB0xtTe+0heoBvHSpbU9Mk7i6uwJnpo4u21XQ==
+  integrity sha512-xDEyu1rg290472FEGaKHnzyDyh5QH+AlWvsU5hMoMtPpzmKlRI0jaYKCgSHDYtaQWZOYbMaduSyCwFwY4n1HmA==
 
-"@tailwindcss/oxide@4.2.1":
+"@tailwindcss/oxide@4.3.1":
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.npmjs.org/@tailwindcss/oxide/-/oxide-4.2.1.tgz"
+  resolved "https://registry.yarnpkg.com/@tailwindcss/oxide/-/oxide-4.3.1.tgz#6fdd28b3abf785e2c2cac31f52c4755875826828"
-  integrity sha512-yv9jeEFWnjKCI6/T3Oq50yQEOqmpmpfzG1hcZsAOaXFQPfzWprWrlHSdGPEF3WQTi8zu8ohC9Mh9J470nT5pUw==
+  integrity sha512-yVPyo8RNkabVr3O2EhHEE0Rewu7YKzc1DhIqfL46LKveFrmu9XbDazNOJY7/GRuvw1h6u3utWnR29H/p5JPlgA==
   optionalDependencies:
-    "@tailwindcss/oxide-android-arm64" "4.2.1"
+    "@tailwindcss/oxide-android-arm64" "4.3.1"
-    "@tailwindcss/oxide-darwin-arm64" "4.2.1"
+    "@tailwindcss/oxide-darwin-arm64" "4.3.1"
-    "@tailwindcss/oxide-darwin-x64" "4.2.1"
+    "@tailwindcss/oxide-darwin-x64" "4.3.1"
-    "@tailwindcss/oxide-freebsd-x64" "4.2.1"
+    "@tailwindcss/oxide-freebsd-x64" "4.3.1"
-    "@tailwindcss/oxide-linux-arm-gnueabihf" "4.2.1"
+    "@tailwindcss/oxide-linux-arm-gnueabihf" "4.3.1"
-    "@tailwindcss/oxide-linux-arm64-gnu" "4.2.1"
+    "@tailwindcss/oxide-linux-arm64-gnu" "4.3.1"
-    "@tailwindcss/oxide-linux-arm64-musl" "4.2.1"
+    "@tailwindcss/oxide-linux-arm64-musl" "4.3.1"
-    "@tailwindcss/oxide-linux-x64-gnu" "4.2.1"
+    "@tailwindcss/oxide-linux-x64-gnu" "4.3.1"
-    "@tailwindcss/oxide-linux-x64-musl" "4.2.1"
+    "@tailwindcss/oxide-linux-x64-musl" "4.3.1"
-    "@tailwindcss/oxide-wasm32-wasi" "4.2.1"
+    "@tailwindcss/oxide-wasm32-wasi" "4.3.1"
-    "@tailwindcss/oxide-win32-arm64-msvc" "4.2.1"
+    "@tailwindcss/oxide-win32-arm64-msvc" "4.3.1"
-    "@tailwindcss/oxide-win32-x64-msvc" "4.2.1"
+    "@tailwindcss/oxide-win32-x64-msvc" "4.3.1"
 
-"@tybys/wasm-util@^0.10.0", "@tybys/wasm-util@^0.10.1":
+"@tybys/wasm-util@^0.10.0":
   version "0.10.1"
   resolved "https://registry.yarnpkg.com/@tybys/wasm-util/-/wasm-util-0.10.1.tgz#ecddd3205cf1e2d5274649ff0eedd2991ed7f414"
   integrity sha512-9tTaPJLSiejZKx+Bmog4uSubteqTvFrVrURwkmHixBo0G4seD0zUxp98E1DzUBJxLQ3NPwXrGKDiVjwx/DpPsg==
   dependencies:
     tslib "^2.4.0"
 
+"@tybys/wasm-util@^0.10.2", "@tybys/wasm-util@^0.10.3":
+  version "0.10.4"
+  resolved "https://registry.yarnpkg.com/@tybys/wasm-util/-/wasm-util-0.10.4.tgz#3e85ecb266f9d1722250e89bc69528615720b154"
+  integrity sha512-W3c4gRigFS0T/Ma4qIYF3GDAc5AQdHb1yL5znJT1Zv1YaD9Kitx656wBjvr19qbiosmZT8lWDM5BEMynUqX65A==
+  dependencies:
+    tslib "^2.4.0"
+
 "@types/babel__core@^7.20.5":
   version "7.20.5"
   resolved "https://registry.npmjs.org/@types/babel__core/-/babel__core-7.20.5.tgz"
@@ -1582,6 +1609,11 @@ deepmerge@^4.3.1:
   resolved "https://registry.npmjs.org/deepmerge/-/deepmerge-4.3.1.tgz"
   integrity sha512-3sUqbMEc77XqpdNO7FRyRog+eW3ph+GYCbj+rK+uYyRMuwsVy0rMiVtPn+QJlKFvWP/1PYpapqYn0Me2knFn+A==
 
+detect-libc@^1.0.3:
+  version "1.0.3"
+  resolved "https://registry.yarnpkg.com/detect-libc/-/detect-libc-1.0.3.tgz#fa137c4bd698edf55cd5cd02ac559f91a4c4ba9b"
+  integrity sha512-pGjwhsmsp4kL2RTz08wcOlGN83otlqHeD/Z5T8GXZB+/YcpQ/dgo+lbU8ZsGxV0HIvqqxo9l7mqYwyYMD9bKDg==
+
 detect-libc@^2.0.3:
   version "2.1.2"
   resolved "https://registry.npmjs.org/detect-libc/-/detect-libc-2.1.2.tgz"
@@ -1622,13 +1654,13 @@ emoji-regex@^9.2.2:
   resolved "https://registry.npmjs.org/emoji-regex/-/emoji-regex-9.2.2.tgz"
   integrity sha512-L18DaJsXSUk2+42pv8mLs5jJT2hqFkFE4j21wOmgbUqsZ2hL72NsUU785g9RXgo3s0ZNgVl42TiHp3ZtOv/Vyg==
 
-enhanced-resolve@^5.19.0:
+enhanced-resolve@5.21.6:
-  version "5.19.0"
+  version "5.21.6"
-  resolved "https://registry.npmjs.org/enhanced-resolve/-/enhanced-resolve-5.19.0.tgz"
+  resolved "https://registry.yarnpkg.com/enhanced-resolve/-/enhanced-resolve-5.21.6.tgz#aa207b43cf658e6ab3ba06896edc00c13c3127c6"
-  integrity sha512-phv3E1Xl4tQOShqSte26C7Fl84EwUdZsyOuSSk9qtAGyyQs2s3jJzComh+Abf4g187lUUAvH+H26omrqia2aGg==
+  integrity sha512-aNnGCvbJ/RIyWo1IuhNdVjnNF+EjH9wpzpNHt+ci/m9He9LJvUN8wrCcXjp9cWsGNAuvSpVFTx/vraAFQ8qGjQ==
   dependencies:
     graceful-fs "^4.2.4"
-    tapable "^2.3.0"
+    tapable "^2.3.3"
 
 error-ex@^1.3.1:
   version "1.3.4"
@@ -2469,10 +2501,10 @@ jest@^30.2.0:
     import-local "^3.2.0"
     jest-cli "30.2.0"
 
-jiti@^2.6.1:
+jiti@^2.7.0:
-  version "2.6.1"
+  version "2.7.0"
-  resolved "https://registry.npmjs.org/jiti/-/jiti-2.6.1.tgz"
+  resolved "https://registry.yarnpkg.com/jiti/-/jiti-2.7.0.tgz#974228f2f4ca2bc21885a1797b45fea68e950c64"
-  integrity sha512-ekilCSN1jwRvIbgeg/57YFh8qQDNbwDb9xT/qu2DAHbFFZUicIl4ygVaAvzveMhMVr3LnpSKTNnwt8PoOfmKhQ==
+  integrity sha512-AC/7JofJvZGrrneWNaEnJeOLUx+JlGt7tNa0wZiRPT4MY1wmfKjt2+6O2p2uz2+skll8OZZmJMNqeke7kKbNgQ==
 
 js-tokens@^4.0.0:
   version "4.0.0"
@@ -2549,79 +2581,79 @@ libsodium-wrappers-sumo@^0.8.2:
   dependencies:
     libsodium-sumo "^0.8.0"
 
-lightningcss-android-arm64@1.31.1:
+lightningcss-android-arm64@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-android-arm64/-/lightningcss-android-arm64-1.31.1.tgz#609ff48332adff452a8157a7c2842fd692a8eac4"
+  resolved "https://registry.yarnpkg.com/lightningcss-android-arm64/-/lightningcss-android-arm64-1.32.0.tgz#f033885116dfefd9c6f54787523e3514b61e1968"
-  integrity sha512-HXJF3x8w9nQ4jbXRiNppBCqeZPIAfUo8zE/kOEGbW5NZvGc/K7nMxbhIr+YlFlHW5mpbg/YFPdbnCh1wAXCKFg==
+  integrity sha512-YK7/ClTt4kAK0vo6w3X+Pnm0D2cf2vPHbhOXdoNti1Ga0al1P4TBZhwjATvjNwLEBCnKvjJc2jQgHXH0NEwlAg==
 
-lightningcss-darwin-arm64@1.31.1:
+lightningcss-darwin-arm64@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.npmjs.org/lightningcss-darwin-arm64/-/lightningcss-darwin-arm64-1.31.1.tgz"
+  resolved "https://registry.yarnpkg.com/lightningcss-darwin-arm64/-/lightningcss-darwin-arm64-1.32.0.tgz#50b71871b01c8199584b649e292547faea7af9b5"
-  integrity sha512-02uTEqf3vIfNMq3h/z2cJfcOXnQ0GRwQrkmPafhueLb2h7mqEidiCzkE4gBMEH65abHRiQvhdcQ+aP0D0g67sg==
+  integrity sha512-RzeG9Ju5bag2Bv1/lwlVJvBE3q6TtXskdZLLCyfg5pt+HLz9BqlICO7LZM7VHNTTn/5PRhHFBSjk5lc4cmscPQ==
 
-lightningcss-darwin-x64@1.31.1:
+lightningcss-darwin-x64@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-darwin-x64/-/lightningcss-darwin-x64-1.31.1.tgz#f7482c311273571ec0c2bd8277c1f5f6e90e03a4"
+  resolved "https://registry.yarnpkg.com/lightningcss-darwin-x64/-/lightningcss-darwin-x64-1.32.0.tgz#35f3e97332d130b9ca181e11b568ded6aebc6d5e"
-  integrity sha512-1ObhyoCY+tGxtsz1lSx5NXCj3nirk0Y0kB/g8B8DT+sSx4G9djitg9ejFnjb3gJNWo7qXH4DIy2SUHvpoFwfTA==
+  integrity sha512-U+QsBp2m/s2wqpUYT/6wnlagdZbtZdndSmut/NJqlCcMLTWp5muCrID+K5UJ6jqD2BFshejCYXniPDbNh73V8w==
 
-lightningcss-freebsd-x64@1.31.1:
+lightningcss-freebsd-x64@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-freebsd-x64/-/lightningcss-freebsd-x64-1.31.1.tgz#91df1bb290f1cb7bb2af832d7d0d8809225e0124"
+  resolved "https://registry.yarnpkg.com/lightningcss-freebsd-x64/-/lightningcss-freebsd-x64-1.32.0.tgz#9777a76472b64ed6ff94342ad64c7bafd794a575"
-  integrity sha512-1RINmQKAItO6ISxYgPwszQE1BrsVU5aB45ho6O42mu96UiZBxEXsuQ7cJW4zs4CEodPUioj/QrXW1r9pLUM74A==
+  integrity sha512-JCTigedEksZk3tHTTthnMdVfGf61Fky8Ji2E4YjUTEQX14xiy/lTzXnu1vwiZe3bYe0q+SpsSH/CTeDXK6WHig==
 
-lightningcss-linux-arm-gnueabihf@1.31.1:
+lightningcss-linux-arm-gnueabihf@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm-gnueabihf/-/lightningcss-linux-arm-gnueabihf-1.31.1.tgz#c3cad5ae8b70045f21600dc95295ab6166acf57e"
+  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm-gnueabihf/-/lightningcss-linux-arm-gnueabihf-1.32.0.tgz#13ae652e1ab73b9135d7b7da172f666c410ad53d"
-  integrity sha512-OOCm2//MZJ87CdDK62rZIu+aw9gBv4azMJuA8/KB74wmfS3lnC4yoPHm0uXZ/dvNNHmnZnB8XLAZzObeG0nS1g==
+  integrity sha512-x6rnnpRa2GL0zQOkt6rts3YDPzduLpWvwAF6EMhXFVZXD4tPrBkEFqzGowzCsIWsPjqSK+tyNEODUBXeeVHSkw==
 
-lightningcss-linux-arm64-gnu@1.31.1:
+lightningcss-linux-arm64-gnu@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm64-gnu/-/lightningcss-linux-arm64-gnu-1.31.1.tgz#a5c4f6a5ac77447093f61b209c0bd7fef1f0a3e3"
+  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm64-gnu/-/lightningcss-linux-arm64-gnu-1.32.0.tgz#417858795a94592f680123a1b1f9da8a0e1ef335"
-  integrity sha512-WKyLWztD71rTnou4xAD5kQT+982wvca7E6QoLpoawZ1gP9JM0GJj4Tp5jMUh9B3AitHbRZ2/H3W5xQmdEOUlLg==
+  integrity sha512-0nnMyoyOLRJXfbMOilaSRcLH3Jw5z9HDNGfT/gwCPgaDjnx0i8w7vBzFLFR1f6CMLKF8gVbebmkUN3fa/kQJpQ==
 
-lightningcss-linux-arm64-musl@1.31.1:
+lightningcss-linux-arm64-musl@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm64-musl/-/lightningcss-linux-arm64-musl-1.31.1.tgz#af26ab8f829b727ada0a200938a6c8796ff36900"
+  resolved "https://registry.yarnpkg.com/lightningcss-linux-arm64-musl/-/lightningcss-linux-arm64-musl-1.32.0.tgz#6be36692e810b718040802fd809623cffe732133"
-  integrity sha512-mVZ7Pg2zIbe3XlNbZJdjs86YViQFoJSpc41CbVmKBPiGmC4YrfeOyz65ms2qpAobVd7WQsbW4PdsSJEMymyIMg==
+  integrity sha512-UpQkoenr4UJEzgVIYpI80lDFvRmPVg6oqboNHfoH4CQIfNA+HOrZ7Mo7KZP02dC6LjghPQJeBsvXhJod/wnIBg==
 
-lightningcss-linux-x64-gnu@1.31.1:
+lightningcss-linux-x64-gnu@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-linux-x64-gnu/-/lightningcss-linux-x64-gnu-1.31.1.tgz#a891d44e84b71c0d88959feb9a7522bbf61450ee"
+  resolved "https://registry.yarnpkg.com/lightningcss-linux-x64-gnu/-/lightningcss-linux-x64-gnu-1.32.0.tgz#0b7803af4eb21cfd38dd39fe2abbb53c7dd091f6"
-  integrity sha512-xGlFWRMl+0KvUhgySdIaReQdB4FNudfUTARn7q0hh/V67PVGCs3ADFjw+6++kG1RNd0zdGRlEKa+T13/tQjPMA==
+  integrity sha512-V7Qr52IhZmdKPVr+Vtw8o+WLsQJYCTd8loIfpDaMRWGUZfBOYEJeyJIkqGIDMZPwPx24pUMfwSxxI8phr/MbOA==
 
-lightningcss-linux-x64-musl@1.31.1:
+lightningcss-linux-x64-musl@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-linux-x64-musl/-/lightningcss-linux-x64-musl-1.31.1.tgz#8c8b21def851f4d477fa897b80cb3db2b650bc6e"
+  resolved "https://registry.yarnpkg.com/lightningcss-linux-x64-musl/-/lightningcss-linux-x64-musl-1.32.0.tgz#88dc8ba865ddddb1ac5ef04b0f161804418c163b"
-  integrity sha512-eowF8PrKHw9LpoZii5tdZwnBcYDxRw2rRCyvAXLi34iyeYfqCQNA9rmUM0ce62NlPhCvof1+9ivRaTY6pSKDaA==
+  integrity sha512-bYcLp+Vb0awsiXg/80uCRezCYHNg1/l3mt0gzHnWV9XP1W5sKa5/TCdGWaR/zBM2PeF/HbsQv/j2URNOiVuxWg==
 
-lightningcss-win32-arm64-msvc@1.31.1:
+lightningcss-win32-arm64-msvc@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-win32-arm64-msvc/-/lightningcss-win32-arm64-msvc-1.31.1.tgz#79000fb8c57e94a91b8fc643e74d5a54407d7080"
+  resolved "https://registry.yarnpkg.com/lightningcss-win32-arm64-msvc/-/lightningcss-win32-arm64-msvc-1.32.0.tgz#4f30ba3fa5e925f5b79f945e8cc0d176c3b1ab38"
-  integrity sha512-aJReEbSEQzx1uBlQizAOBSjcmr9dCdL3XuC/6HLXAxmtErsj2ICo5yYggg1qOODQMtnjNQv2UHb9NpOuFtYe4w==
+  integrity sha512-8SbC8BR40pS6baCM8sbtYDSwEVQd4JlFTOlaD3gWGHfThTcABnNDBda6eTZeqbofalIJhFx0qKzgHJmcPTnGdw==
 
-lightningcss-win32-x64-msvc@1.31.1:
+lightningcss-win32-x64-msvc@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.yarnpkg.com/lightningcss-win32-x64-msvc/-/lightningcss-win32-x64-msvc-1.31.1.tgz#7f025274c81c7d659829731e09c8b6f442209837"
+  resolved "https://registry.yarnpkg.com/lightningcss-win32-x64-msvc/-/lightningcss-win32-x64-msvc-1.32.0.tgz#141aa5605645064928902bb4af045fa7d9f4220a"
-  integrity sha512-I9aiFrbd7oYHwlnQDqr1Roz+fTz61oDDJX7n9tYF9FJymH1cIN1DtKw3iYt6b8WZgEjoNwVSncwF4wx/ZedMhw==
+  integrity sha512-Amq9B/SoZYdDi1kFrojnoqPLxYhQ4Wo5XiL8EVJrVsB8ARoC1PWW6VGtT0WKCemjy8aC+louJnjS7U18x3b06Q==
 
-lightningcss@1.31.1:
+lightningcss@1.32.0:
-  version "1.31.1"
+  version "1.32.0"
-  resolved "https://registry.npmjs.org/lightningcss/-/lightningcss-1.31.1.tgz"
+  resolved "https://registry.yarnpkg.com/lightningcss/-/lightningcss-1.32.0.tgz#b85aae96486dcb1bf49a7c8571221273f4f1e4a9"
-  integrity sha512-l51N2r93WmGUye3WuFoN5k10zyvrVs0qfKBhyC5ogUQ6Ew6JUSswh78mbSO+IU3nTWsyOArqPCcShdQSadghBQ==
+  integrity sha512-NXYBzinNrblfraPGyrbPoD19C1h9lfI/1mzgWYvXUTe414Gz/X1FD2XBZSZM7rRTrMA8JL3OtAaGifrIKhQ5yQ==
   dependencies:
     detect-libc "^2.0.3"
   optionalDependencies:
-    lightningcss-android-arm64 "1.31.1"
+    lightningcss-android-arm64 "1.32.0"
-    lightningcss-darwin-arm64 "1.31.1"
+    lightningcss-darwin-arm64 "1.32.0"
-    lightningcss-darwin-x64 "1.31.1"
+    lightningcss-darwin-x64 "1.32.0"
-    lightningcss-freebsd-x64 "1.31.1"
+    lightningcss-freebsd-x64 "1.32.0"
-    lightningcss-linux-arm-gnueabihf "1.31.1"
+    lightningcss-linux-arm-gnueabihf "1.32.0"
-    lightningcss-linux-arm64-gnu "1.31.1"
+    lightningcss-linux-arm64-gnu "1.32.0"
-    lightningcss-linux-arm64-musl "1.31.1"
+    lightningcss-linux-arm64-musl "1.32.0"
-    lightningcss-linux-x64-gnu "1.31.1"
+    lightningcss-linux-x64-gnu "1.32.0"
-    lightningcss-linux-x64-musl "1.31.1"
+    lightningcss-linux-x64-musl "1.32.0"
-    lightningcss-win32-arm64-msvc "1.31.1"
+    lightningcss-win32-arm64-msvc "1.32.0"
-    lightningcss-win32-x64-msvc "1.31.1"
+    lightningcss-win32-x64-msvc "1.32.0"
 
 lines-and-columns@^1.1.6:
   version "1.2.4"
@@ -2680,9 +2712,9 @@ merge-stream@^2.0.0:
   resolved "https://registry.npmjs.org/merge-stream/-/merge-stream-2.0.0.tgz"
   integrity sha512-abv/qOcuPfk3URPfDzmZU1LKmuw8kT+0nIHvKrKgFrwifol/doWcdA4ZqsWQ8ENrFKkd67Mfpo/LovbIUsbt3w==
 
-micromatch@^4.0.8:
+micromatch@^4.0.5, micromatch@^4.0.8:
   version "4.0.8"
-  resolved "https://registry.npmjs.org/micromatch/-/micromatch-4.0.8.tgz"
+  resolved "https://registry.yarnpkg.com/micromatch/-/micromatch-4.0.8.tgz#d66fa18f3a47076789320b9b1af32bd86d9fa202"
   integrity sha512-PXwfBhYu0hBCPw8Dn0E+WDYb7af3dSLVWKi3HGv84IdF4TyFoC0ysxFd0Goxw7nSv4T/PzEJQxsYsEiFCKo2BA==
   dependencies:
     braces "^3.0.3"
@@ -2873,7 +2905,7 @@ picomatch@^2.0.4, picomatch@^2.3.1:
   resolved "https://registry.npmjs.org/picomatch/-/picomatch-2.3.1.tgz"
   integrity sha512-JU3teHTNjmE2VCGFzuY8EXzCDVwEqB2a8fsIvwaStHhAWJEeVd1o1QD80CU6+ZdEXXSLbSsuLwJjkCBWqRQUVA==
 
-picomatch@^4.0.2, picomatch@^4.0.3:
+picomatch@^4.0.2:
   version "4.0.3"
   resolved "https://registry.npmjs.org/picomatch/-/picomatch-4.0.3.tgz"
   integrity sha512-5gTmgEY/sqK6gFXLIsQNH19lWb4ebPDLA4SdLP7dsWkIXHWlG66oPuVvXSGFPppYZz8ZDZq0dYYrbHfBCVUb1Q==
@@ -3134,15 +3166,15 @@ synckit@^0.11.8:
   dependencies:
     "@pkgr/core" "^0.2.9"
 
-tailwindcss@4.2.1, tailwindcss@^4.2.1:
+tailwindcss@4.3.1:
-  version "4.2.1"
+  version "4.3.1"
-  resolved "https://registry.npmjs.org/tailwindcss/-/tailwindcss-4.2.1.tgz"
+  resolved "https://registry.yarnpkg.com/tailwindcss/-/tailwindcss-4.3.1.tgz#78ee06f6186bc8fb9603f8083eb703dc7dd96a10"
-  integrity sha512-/tBrSQ36vCleJkAOsy9kbNTgaxvGbyOamC30PRePTQe/o1MFwEKHQk4Cn7BNGaPtjp+PuUrByJehM1hgxfq4sw==
+  integrity sha512-hk+TB1m+K8CYNrP6rjQaq/Y+4Zylwpa87mLYBKCunwnnQ9p+fHb7kmSfGqyEJoxF/O6CDyABWVFEafNSYKll+Q==
 
-tapable@^2.3.0:
+tapable@^2.3.3:
-  version "2.3.0"
+  version "2.3.3"
-  resolved "https://registry.npmjs.org/tapable/-/tapable-2.3.0.tgz"
+  resolved "https://registry.yarnpkg.com/tapable/-/tapable-2.3.3.tgz#5da7c9992c46038221267985ab28421a8879f160"
-  integrity sha512-g9ljZiwki/LfxmQADO3dEY1CbpmXT5Hm2fJ+QaGKwSXUylMybePR7/67YW7jOrrvjEgL1Fmz5kzyAjWVWLlucg==
+  integrity sha512-uxc/zpqFg6x7C8vOE7lh6Lbda8eEL9zmVm/PLeTPBRhh1xCgdWaQ+J1CUieGpIfm2HdtsUpRv+HshiasBMcc6A==
 
 test-exclude@^6.0.0:
   version "6.0.0"