Compare commits

..
Author SHA1 Message Date
sneak 3497c41185 Keep the sww and rproxy tests from failing on a busy host (closes #420)
check / check (push) Waiting to run
The rproxy package's tests and sww's startRProxyProcess give rproxy a
minute for waf's answers unless a test sets
SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS. At the 2-second default, a slow host
made rproxy drop questions and reports.

TestMainRunsWAF runs waf with the Core Rule Set off. Main keeps waf's
500 ms limit for its checks, and under the race detector the Core Rule
Set's inspection could pass it and get 503.

Model: opus-5-5
2026-11-19 09:54:34 +00:00
clawbot 9cb8f362bc sww: lift waf's check time limit and rproxy's wait in tests (closes #418)
check / check (push) Waiting to run
Under heavy host load the sww tests got 503 where they expected 200 or
403: waf refused requests whose trap paths, rule files and Core Rule Set
took longer than 500 ms, and rproxy gave up on waf after 2 s.

waf.Params and sww.Params gain BesideLookupTimeLimit; zero keeps the
500 ms limit, so the binary is unchanged. The sww tests' run gives waf
an hour, and startRProxy sets SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS to
60000, as the rproxy package's tests do. waf's own tests set the limit
through the new field instead of SetBesideLookupTimeLimit, which is gone.

Model: opus-5-5
2026-11-19 10:44:53 +01:00
clawbot 48edab5dad Test rproxy's 32 KiB header limit at its edge (closes #415)
check / check (push) Waiting to run
The limit was already a constant with no setting. These tests pin it:
a request line and headers of exactly 32 KiB reach the app, and one
byte more is answered 431 with the connection closed and waf not asked.

Model: opus-5-5
2026-11-19 10:20:07 +01:00
12 changed files with 121 additions and 58 deletions

No files matched your search

+23 -27
View File
@@ -284,10 +284,6 @@ account, a key, a token or an alert destination stays off until you give one.
`SWW_WAF_BYTES_COUNTED` says. Headers are never counted. What the visitor sent
over a WebSocket counts as request bytes, and what the app sent as response
bytes.
- An anomaly is more requests or bytes than an `SWW_WAF_ANOMALY_` threshold
allows. Crossing a threshold sends one `anomaly` alert to the alert
destinations, and does nothing else: no client is banned, rate limited or
blocked.
- An invalid setting stops the process at start with one log line naming the
variable and what is wrong with the value. The settings in effect are logged
on one line at start, with tokens, keys and webhook paths shown as `********`.
@@ -388,29 +384,29 @@ Every setting the code reads, with its default:
| `SWW_WAF_ALERT_EVENTS` | `ban,permanent_ban,core_rule_set_match,anomaly,reputation_hit,source_failure,file_error` | The events alerts are sent for; the hourly `summary` is sent whatever it says. |
| `SWW_WAF_ALERT_COOLDOWN` | `15m` | How long after an alert its repeats are held back and counted, a duration or `off`. |
| `SWW_WAF_ALERT_MAX_PER_HOUR` | `60` | The most alerts sent in an hour, a number or `off`; the rest are counted in the hour's `summary`. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Alert when one client makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Alert when one client makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one client in a minute, a size. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one client in an hour, a size. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Alert when the netblock around a client makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Alert when the netblock around a client makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the netblock around a client in a minute, a size. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the netblock around a client in an hour, a size. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Alert when one AS number makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Alert when one AS number makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one AS number in a minute, a size. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one AS number in an hour, a size. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Alert when the whole service gets more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Alert when the whole service gets more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the whole service in a minute, a size. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the whole service in an hour, a size. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Alert when a watched netblock makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Alert when a watched netblock makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for a watched netblock in a minute, a size. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for a watched netblock in an hour, a size. |
[`docs/settings.md`](docs/settings.md) gives the values each setting takes in
full, and the limits that are fixed rather than settings.
-5
View File
@@ -364,11 +364,6 @@ tag that no request can get stops the start. A request can get only these:
## Anomaly thresholds
An anomaly is more requests or bytes than one of these thresholds allows.
Crossing a threshold sends one `anomaly` alert to the destinations under
"Alerting", and does nothing else: no client is banned, rate limited or blocked.
`SWW_WAF_ALERT_COOLDOWN` holds back repeats of that alert.
Each scope has four thresholds: the most requests and the most body bytes
counted in a minute and in an hour. The bytes are those `SWW_WAF_BYTES_COUNTED`
names. Requests are counts, bytes are sizes. Each is `off` by default. The four
+53
View File
@@ -71,6 +71,59 @@ func TestServerHasTheFixedLimits(t *testing.T) {
}
}
// getOfSize is a GET whose request line and headers, the blank line that ends
// them included, are size bytes long.
func getOfSize(size int) string {
const start, end = "GET / HTTP/1.1\r\nHost: site.example\r\nX-Pad: ", "\r\n\r\n"
return start + strings.Repeat("x", size-len(start)-len(end)) + end
}
func TestARequestLineAndHeadersOf32KiBReachTheApp(t *testing.T) {
t.Parallel()
standIn := startWAF(t, allow)
app := startApp(t, greet)
addr, _ := startRProxy(t, standIn.URL, app.URL, nil)
conn := dial(t, addr)
send(t, conn, getOfSize(32<<10))
if status := readStatus(t, conn); status != http.StatusOK {
t.Errorf("status %d, want the app's 200", status)
}
}
func TestARequestLineAndHeadersOver32KiBAreRefusedAndTheConnectionClosed(
t *testing.T,
) {
t.Parallel()
standIn := startWAF(t, allow)
app := startApp(t, func(http.ResponseWriter, *http.Request) {
t.Error("the app was asked")
})
addr, _ := startRProxy(t, standIn.URL, app.URL, nil)
conn := dial(t, addr)
send(t, conn, getOfSize(32<<10+1))
// io.ReadAll returns without an error only once rproxy has closed the
// connection.
text, err := io.ReadAll(conn)
if err != nil || !strings.HasPrefix(string(text), "HTTP/1.1 431 ") {
t.Errorf(
"read %q (%v), want 431 and the connection closed",
text,
err,
)
}
if len(standIn.questions) != 0 {
t.Error("waf was asked")
}
}
func TestABodyAnnouncedOverItsLimitIsRefusedOnceWAFAllowsIt(t *testing.T) {
t.Parallel()
+3 -1
View File
@@ -324,7 +324,8 @@ func greet(w http.ResponseWriter, r *http.Request) {
// startRProxy starts rproxy with waf at backend and the app at appURL, and
// the settings in env on top of the defaults. It returns where rproxy listens
// and what it writes.
// and what it writes. SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS is a minute unless env
// sets it, so that a busy host cannot make rproxy drop a question or a report.
func startRProxy(
t *testing.T, backend, appURL string, env map[string]string,
) (string, *output) {
@@ -357,6 +358,7 @@ func startServerLogging(
settings := map[string]string{
"SWW_RPROXY_WAF_BACKEND": backend, "SWW_RPROXY_UPSTREAM_URL": appURL,
wafBackendTimeout: "60000",
}
maps.Copy(settings, env)
+9 -3
View File
@@ -51,7 +51,9 @@ func runRProxy(ctx context.Context, env map[string]string, out *output) int {
// startRProxy runs rproxy with waf at backend and the app at appURL, and
// returns its URL and what it writes. It believes X-Forwarded-For from the
// tests. It stops as the test ends, and that it stopped in order is checked.
// tests. It waits a minute for waf's answer, so that a slow answer on a busy
// host is not taken for no answer. It stops as the test ends, and that it
// stopped in order is checked.
func startRProxy(t *testing.T, backend, appURL string) (string, *output) {
t.Helper()
@@ -65,6 +67,7 @@ func startRProxy(t *testing.T, backend, appURL string) (string, *output) {
"SWW_RPROXY_UPSTREAM_URL": appURL,
"SWW_RPROXY_TRUSTED_PROXIES": localhost + "/32",
wafBackend: backend,
wafBackendTimeout: "60000",
}, out)
}()
@@ -549,7 +552,9 @@ func TestAStatusWAFDoesNotTakeIsReportedAs599(t *testing.T) {
// startRProxyProcess runs `sww rproxy` in a process of its own, with the
// settings in env, each as NAME=value. It returns where rproxy listens and a
// function that sends rproxy SIGTERM and fails the test unless it exits with
// status 0 within waitLimit.
// status 0 within waitLimit. It waits a minute for waf's answers unless env
// sets SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, so that a busy host cannot make it
// drop a question.
func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
t.Helper()
@@ -565,7 +570,8 @@ func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
cmd.Env = append(os.Environ(),
commandForMain+"=rproxy",
"SWW_RPROXY_LISTEN_ADDR="+localhost+":0")
"SWW_RPROXY_LISTEN_ADDR="+localhost+":0",
wafBackendTimeout+"=60000")
cmd.Env = append(cmd.Env, env...)
exited := startProcess(t, cmd)
+10 -4
View File
@@ -67,6 +67,9 @@ type Params struct {
Viper *viper.Viper
// Stdout receives the request log and the process's own messages.
Stdout io.Writer
// BesideLookupTimeLimit is the waf.Params.BesideLookupTimeLimit RunWAF
// gives waf. Main leaves it zero, waf's own limit; tests lengthen it.
BesideLookupTimeLimit time.Duration
}
// Main runs the command os.Args names, and returns the process's exit status.
@@ -146,7 +149,7 @@ func RunWAF(ctx context.Context, params Params) int {
return runWAFWithSettings(
ctx,
params.Version,
params,
cfg,
stdout,
remote,
@@ -159,7 +162,7 @@ func RunWAF(ctx context.Context, params Params) int {
// SWW_WAF_LOG_REMOTE_URL is set.
func runWAFWithSettings(
ctx context.Context,
version string,
params Params,
cfg *config.WAF,
stdout io.Writer,
remote *remotelog.Sender,
@@ -193,6 +196,7 @@ func runWAFWithSettings(
ruleFiles,
alertQueue,
crs,
params.BesideLookupTimeLimit,
)
if err != nil {
return cannotStart(processLog, "cannot use the lookup database", err)
@@ -221,7 +225,7 @@ func runWAFWithSettings(
}
processLog.Info("starting",
"version", version,
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
@@ -249,7 +253,7 @@ func cannotStart(processLog *slog.Logger, message string, err error) int {
func newServer(
cfg *config.WAF, stdout io.Writer, processLog *slog.Logger,
now func() time.Time, ruleFiles *rules.Files, alertQueue *alerts.Queue,
crs *coreruleset.CoreRuleSet,
crs *coreruleset.CoreRuleSet, besideLookupTimeLimit time.Duration,
) (*waf.Server, error) {
var lookupFile *lookup.File
@@ -278,6 +282,8 @@ func newServer(
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: besideLookupTimeLimit,
})
server.Metrics.AddAlerts(alertQueue)
+3
View File
@@ -173,6 +173,9 @@ func run(ctx context.Context, env map[string]string, out *output) int {
Version: testVersion,
Viper: v,
Stdout: out,
// The race detector and a busy host can slow the Core Rule Set's
// inspections past waf's own limit.
BesideLookupTimeLimit: time.Hour,
})
}
+4 -1
View File
@@ -90,6 +90,8 @@ func TestMainRunsWAF(t *testing.T) {
cmd := exec.CommandContext(t.Context(), binary)
cmd.Stdout = out
// The Core Rule Set is off. Main keeps waf's own limit for its checks,
// and on a busy host the Core Rule Set's inspection can pass it.
cmd.Env = append(os.Environ(),
"TZ="+zone,
commandForMain+"="+wafCommand,
@@ -97,7 +99,8 @@ func TestMainRunsWAF(t *testing.T) {
stateDir+"="+dir,
cacheDir+"="+dir,
ruleFilesDir+"="+t.TempDir(),
lookupSource+"=off")
lookupSource+"=off",
"SWW_WAF_CORE_RULE_SET_MODE=off")
exited := startProcess(t, cmd)
+1 -1
View File
@@ -73,10 +73,10 @@ func newWAFHoldingTheCoreRuleSet(
server, out, queue := newWAFWith(t, func(params waf.Params) *waf.Server {
params.CoreRuleSet = crs
params.BesideLookupTimeLimit = waf.BesideLookupTimeLimit
return waf.New(params)
}, silentGeoJSURL, time.Now, settings)
server.SetBesideLookupTimeLimit(waf.BesideLookupTimeLimit)
return server, out, queue
}
-9
View File
@@ -1,13 +1,4 @@
package waf
import "time"
// BesideLookupTimeLimit is besideLookupTimeLimit.
const BesideLookupTimeLimit = besideLookupTimeLimit
// SetBesideLookupTimeLimit gives the heuristics of besideLookup limit on s in
// place of besideLookupTimeLimit.
func (s *Server) SetBesideLookupTimeLimit(limit time.Duration) {
h := s.Handler.(*handler) //nolint:forcetypeassert // New makes it one
h.besideLookupLimit = limit
}
+12 -2
View File
@@ -4,6 +4,7 @@
package waf
import (
"cmp"
"fmt"
"io"
"log/slog"
@@ -83,6 +84,11 @@ type Params struct {
// failing, a query to a DNSBL zone or a check with AbuseIPDB failing,
// or the day's AbuseIPDB checks used up.
Alerts *alerts.Queue
// BesideLookupTimeLimit is how long the heuristics of besideLookup have
// for a request. Zero means besideLookupTimeLimit. Tests that run the
// Core Rule Set lengthen it, since the race detector and a busy host can
// slow an inspection past besideLookupTimeLimit.
BesideLookupTimeLimit time.Duration
}
// CoreRuleSetInspector inspects a request with the Core Rule Set, as
@@ -168,7 +174,10 @@ func newHandler(params Params) *handler {
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
besideLookupLimit: besideLookupTimeLimit,
besideLookupLimit: cmp.Or(
params.BesideLookupTimeLimit,
besideLookupTimeLimit,
),
}
if params.Config.RouteWatchURL != "" {
h.routeWatch = routewatch.New(routewatch.Params{
@@ -292,7 +301,8 @@ type handler struct {
// waitForGeoJS is true when a setting needs each request's answer from
// GeoJS before the request goes on.
waitForGeoJS bool
// besideLookupLimit is besideLookupTimeLimit. Only tests change it.
// besideLookupLimit is how long the heuristics of besideLookup have for a
// request, as Params.BesideLookupTimeLimit says.
besideLookupLimit time.Duration
// awaitingReport holds the decision on each answered question by its id
// until its report comes, and nil for a question still being handled.
+3 -5
View File
@@ -510,13 +510,11 @@ func newWAFWith(
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
// The tests of the limit set it back, and hold the Core Rule Set
// with a stand-in.
BesideLookupTimeLimit: time.Hour,
})
// The race detector and a busy host can slow the Core Rule Set's
// inspections past the time limit. The tests of the limit set it back, and
// hold the Core Rule Set with a stand-in.
server.SetBesideLookupTimeLimit(time.Hour)
return server, out, alertQueue
}