Read the source host's port from the parsed URL (part of #246)

net.SplitHostPort fails on an IPv6 address written without brackets,
so with 2001:db8::1 allowlisted, 2001:db8::1:8443 and 2001:db8::1:
counted as having no port and were served without a signature, though
the fetcher connects to port 8443. ValidateRequest now takes a host to
have a port when the parsed URL's Port() is set or the host ends in
":", as Go's URL parser and so the fetcher read it.

Model: opus-5-5

README.md

@@ -418,9 +418,13 @@ HMAC-SHA256(secret, "host:path:query:width:height:format:expiration:quality:fit"
 
 Where:
 
-- `host` — source origin hostname (e.g. `cdn.example.com`)
-- `path` — source path (e.g. `/photos/cat.jpg`)
-- `query` — source query string, empty string if none
+- `host` — source origin hostname in lower case, whatever its case in the URL,
+  followed by `:` and the port when the URL has one (e.g. `cdn.example.com`)
+- `path` — source path (e.g. `/photos/cat.jpg`), with each `%` written as `%25`
+  and each `:` as `%3A`, so `/photos/a:b.jpg` is signed as `/photos/a%3Ab.jpg`
+- `query` — source query string, empty string if none, with `%` and `:` written
+  as in `path`; neither then holds a `:`, so path `/a:b` with no query and path
+  `/a` with query `b:` are signed differently
 - `width` — requested width in pixels, `0` for original
 - `height` — requested height in pixels, `0` for original
 - `format` — output format, one of those listed under Routes, with `original`
@@ -470,6 +474,12 @@ entry that is neither a host name (letters, digits, hyphens, underscores and
 dots, with at most one leading dot) nor an IP address, such as one with a port
 or a `*.` wildcard, aborts startup.
 
+pixa lower-cases the host of a `/v1/image/` URL before anything else uses it, so
+`CDN.Example.com` is matched, fetched, cached and counted against
+`upstream_connections_per_host` as `cdn.example.com`. Such a URL whose host has
+a port, as in `cdn.example.com:8443`, or a `:` with no port, needs a signature
+even when the host is allowlisted. A host holding `@` is refused with 400.
+
 ### Configuration
 
 Every setting can be given as an environment variable, in a YAML config file

TODO.md

@@ -30,6 +30,25 @@ P2: security: per-origin rate limiting
 
 # Completed Steps
 
+- 2026-10-15 the host of a `/v1/image/` URL is lower-cased, and one with a port
+  needs a signature (closes #246): with `cdn.example.com` allowlisted,
+  `CDN.Example.com` and `cdn.example.com:8443` passed the allowlist too, and
+  each spelling was fetched and cached on its own and had connections of its own
+  under `upstream_connections_per_host`. The image URL parser now lower-cases
+  the host and refuses one holding `@`, which a URL reads as a user name and
+  password, with 400. A host with a port, or with a `:` and no port, needs a
+  signature even when it is allowlisted. That is checked in the image service,
+  not in `allowlist.IsAllowed`, which also matches `referer_blocklist`, where a
+  `Referer` is blocked whatever its port. A URL is signed over the lower-cased
+  host.
+- 2026-10-15 a `:` in the source path or query no longer moves where the path
+  ends and the query begins (closes #247): the signed data and the cache key
+  joined host, path and query with `:` and no escaping, so a URL signed for
+  `https://h/a:b` verified for `https://h/a?b:`; the two also shared a cache
+  key, and whichever was fetched first was served for both. In both, the path
+  and the query now have each `%` written as `%25` and each `:` as `%3A`; a path
+  and query holding neither are signed and keyed as before. Signature
+  Specification in `README.md` says so.
 - 2026-10-15 the example config allowlists no host (closes #249): it allowlisted
   `github.com` and `user-images.githubusercontent.com`, where anyone can put an
   image, so a deployment set up as Getting Started says served those images to
@@ -38,6 +57,15 @@ P2: security: per-origin rate limiting
   commented entry under `example.com`. Getting Started and "Running under upaas"
   in `README.md` say that every image on an allowlisted host is served without a
   signature, so an allowlisted host must be one the operator controls.
+- 2026-10-15 a chunked upstream body of exactly `upstream_max_response_size`
+  bytes is accepted (closes #248): once the limit was used up, the fetcher's
+  next read refused the body without looking for its end. Go's HTTP client
+  returns the end of a body sent with a `Content-Length` together with its last
+  bytes, but the end of a chunked body can come in a later read, so such a body
+  was refused after it had been downloaded whole, and the image routes
+  answered 500. Once the limit is used up, the fetcher now reads one more byte:
+  if the body has ended it is accepted, and if there is more it is refused with
+  `ErrResponseTooLarge`, as before.
 - 2026-10-13 `fit=outside` no longer makes an output above 8192 on a side
   (closes #257): it scales the image to cover the requested size, and the side
   scaled past that size was held to no maximum, so `1x8192?fit=outside` of a

internal/httpfetcher/fetch_internal_test.go

@@ -9,6 +9,7 @@ import (
 	"net/http"
 	"net/http/httptest"
 	"slices"
+	"strconv"
 	"strings"
 	"sync"
 	"testing"
@@ -297,6 +298,139 @@ func TestFetchMaxResponseSizeEnforced(t *testing.T) {
 	}
 }
 
+// fetchWithMaxResponseSize serves handler as the fake upstream and fetches
+// its /image route with MaxResponseSize set to maxResponseSize.
+func fetchWithMaxResponseSize(
+	t *testing.T,
+	maxResponseSize int64,
+	handler http.HandlerFunc,
+) *FetchResult {
+	t.Helper()
+
+	srv := httptest.NewServer(handler)
+	t.Cleanup(srv.Close)
+
+	cfg := DefaultConfig()
+	cfg.MaxResponseSize = maxResponseSize
+
+	f, _ := newServerFetcher(t, srv, cfg)
+
+	res := fetchImage(t, f, "/image")
+	t.Cleanup(func() { _ = res.Content.Close() })
+
+	return res
+}
+
+// TestFetchContentLengthBodyAtMaxResponseSize checks that a body sent with a
+// Content-Length is read whole at exactly MaxResponseSize bytes and refused
+// at one byte more.
+func TestFetchContentLengthBodyAtMaxResponseSize(t *testing.T) {
+	t.Parallel()
+
+	const maxResponseSize = 8
+
+	for _, tc := range []struct {
+		size    int
+		wantErr error
+	}{
+		{maxResponseSize, nil},
+		{maxResponseSize + 1, ErrResponseTooLarge},
+	} {
+		t.Run(strconv.Itoa(tc.size)+" bytes", func(t *testing.T) {
+			t.Parallel()
+
+			body := strings.Repeat("x", tc.size)
+
+			res := fetchWithMaxResponseSize(t, maxResponseSize,
+				func(w http.ResponseWriter, _ *http.Request) {
+					w.Header().Set("Content-Type", contentTypeJPEG)
+					w.Header().Set("Content-Length", strconv.Itoa(tc.size))
+					_, _ = io.WriteString(w, body)
+				})
+
+			if res.ContentLength != int64(tc.size) {
+				t.Fatalf("ContentLength = %d, want %d", res.ContentLength, tc.size)
+			}
+
+			data, err := io.ReadAll(res.Content)
+			t.Logf("body of %d bytes: read %d, error %v", tc.size, len(data), err)
+
+			if !errors.Is(err, tc.wantErr) {
+				t.Fatalf("read error = %v, want %v", err, tc.wantErr)
+			}
+
+			if err == nil && string(data) != body {
+				t.Errorf("read %q, want %q", data, body)
+			}
+		})
+	}
+}
+
+// TestFetchChunkedBodyAtMaxResponseSize checks that a chunked body is read
+// whole at exactly MaxResponseSize bytes and refused at one byte more. The
+// upstream sends the end of the body only once the test has read
+// MaxResponseSize bytes, so the read after them comes before the end of the
+// body has arrived, as it can from a real upstream.
+func TestFetchChunkedBodyAtMaxResponseSize(t *testing.T) {
+	t.Parallel()
+
+	const maxResponseSize = 8
+
+	for _, tc := range []struct {
+		size    int
+		wantErr error
+	}{
+		{maxResponseSize, nil},
+		{maxResponseSize + 1, ErrResponseTooLarge},
+	} {
+		t.Run(strconv.Itoa(tc.size)+" bytes", func(t *testing.T) {
+			t.Parallel()
+
+			body := strings.Repeat("x", tc.size)
+			endBody := make(chan struct{})
+
+			res := fetchWithMaxResponseSize(t, maxResponseSize,
+				func(w http.ResponseWriter, r *http.Request) {
+					w.Header().Set("Content-Type", contentTypeJPEG)
+					_, _ = io.WriteString(w, body)
+					// With no Content-Length, flushing sends the body
+					// chunked; its end is sent when the handler returns.
+					_ = http.NewResponseController(w).Flush()
+
+					select {
+					case <-endBody:
+					case <-r.Context().Done():
+					}
+				})
+
+			if res.ContentLength != -1 {
+				t.Fatalf("ContentLength = %d, want -1 (chunked)", res.ContentLength)
+			}
+
+			head := make([]byte, maxResponseSize)
+
+			_, err := io.ReadFull(res.Content, head)
+			if err != nil {
+				t.Fatalf("read the first %d bytes: %v", maxResponseSize, err)
+			}
+
+			close(endBody)
+
+			rest, err := io.ReadAll(res.Content)
+			data := string(head) + string(rest)
+			t.Logf("body of %d bytes: read %d, error %v", tc.size, len(data), err)
+
+			if !errors.Is(err, tc.wantErr) {
+				t.Fatalf("read error = %v, want %v", err, tc.wantErr)
+			}
+
+			if err == nil && data != body {
+				t.Errorf("read %q, want %q", data, body)
+			}
+		})
+	}
+}
+
 func TestFetchSemaphoreReleasedOnError(t *testing.T) {
 	t.Parallel()
 

internal/httpfetcher/httpfetcher.go

@@ -660,14 +660,33 @@ func dialSSRFSafe(
 	return nil, fmt.Errorf("%w to %s", errConnectFailed, host)
 }
 
-// limitedReader wraps a reader and limits the number of bytes read.
+// limitedReader wraps a reader and refuses a body longer than remaining
+// bytes with ErrResponseTooLarge. remaining goes below 0 once the body is
+// found to be longer.
 type limitedReader struct {
 	reader    io.Reader
 	remaining int64
 }
 
+// Read reads at most the remaining bytes. Once they are read, it reads one
+// more byte to tell the end of the body from more data: at the end it
+// returns the wrapped reader's error, io.EOF; with more data it returns
+// ErrResponseTooLarge, as does every later Read.
 func (r *limitedReader) Read(p []byte) (int, error) {
-	if r.remaining <= 0 {
+	if r.remaining < 0 {
+		return 0, ErrResponseTooLarge
+	}
+
+	if r.remaining == 0 {
+		var extra [1]byte
+
+		n, err := r.reader.Read(extra[:])
+		r.remaining -= int64(n)
+
+		if n == 0 {
+			return 0, err
+		}
+
 		return 0, ErrResponseTooLarge
 	}
 

internal/imgcache/service.go

@@ -9,6 +9,7 @@ import (
 	"log/slog"
 	"net/url"
 	"runtime/debug"
+	"strings"
 	"time"
 
 	"github.com/dustin/go-humanize"
@@ -218,7 +219,16 @@ func (s *Service) ValidateRequest(req *ImageRequest) error {
 		return fmt.Errorf("invalid source URL: %w", err)
 	}
 
-	if s.allowlist.IsAllowed(parsedURL) {
+	// An allowlist entry names no port, so a host followed by ":", with or
+	// without a port, needs a signature. The port is read from the parsed
+	// URL, as the fetcher reads it: in an IPv6 address written without
+	// brackets, such as 2001:db8::1:8443, it is what follows the last ":".
+	// This is checked here and not in allowlist.IsAllowed, which also matches
+	// referer_blocklist, where a Referer must be blocked whatever its port.
+	hostHasPort := parsedURL.Port() != "" ||
+		strings.HasSuffix(parsedURL.Host, ":")
+
+	if !hostHasPort && s.allowlist.IsAllowed(parsedURL) {
 		return nil
 	}
 

internal/imgcache/service_internal_test.go

@@ -250,6 +250,97 @@ func TestService_ValidateRequest_SignatureExactHostMatch(t *testing.T) {
 	}
 }
 
+// TestService_ValidateRequest_HostWithPortNeedsSignature verifies that a host
+// followed by a port, or by a colon with no port, matches no allowlist entry,
+// so that a request for it without a signature is refused, while the same
+// host with no port is allowlisted.
+func TestService_ValidateRequest_HostWithPortNeedsSignature(t *testing.T) {
+	t.Parallel()
+
+	svc, _ := SetupTestService(t,
+		WithSigningKey(testSigningKey),
+		WithAllowlist(testHostCDN, "203.0.113.5", "2001:db8::1"),
+	)
+
+	tests := []struct {
+		host        string
+		allowlisted bool
+	}{
+		{testHostCDN, true},
+		{"cdn.example.com:8443", false},
+		{"cdn.example.com:443", false},
+		{"cdn.example.com:", false},
+		{"203.0.113.5", true},
+		{"203.0.113.5:8080", false},
+		{"[2001:db8::1]", true},
+		{"[2001:db8::1]:8443", false},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.host, func(t *testing.T) {
+			t.Parallel()
+
+			req := &ImageRequest{
+				SourceHost: tt.host,
+				SourcePath: testPathCat,
+				Size:       Size{Width: 50, Height: 50},
+				Format:     FormatJPEG,
+				Quality:    85,
+				FitMode:    FitCover,
+			}
+
+			err := svc.ValidateRequest(req)
+			t.Logf("ValidateRequest() for host %q with no signature: %v",
+				tt.host, err)
+
+			if allowlisted := err == nil; allowlisted != tt.allowlisted {
+				t.Errorf("host %q served without a signature = %v, want %v",
+					tt.host, allowlisted, tt.allowlisted)
+			}
+		})
+	}
+}
+
+// TestService_ValidateRequest_UnbracketedIPv6PortNeedsSignature verifies that
+// an allowlisted IPv6 address written without brackets and followed by a
+// port, or by a colon with no port, needs a signature. Go's URL parser, which
+// the fetcher uses, reads 2001:db8::1:8443 as the host 2001:db8::1 with the
+// port 8443.
+func TestService_ValidateRequest_UnbracketedIPv6PortNeedsSignature(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	svc, _ := SetupTestService(t,
+		WithSigningKey(testSigningKey),
+		WithAllowlist("2001:db8::1"),
+	)
+
+	for _, host := range []string{"2001:db8::1:8443", "2001:db8::1:"} {
+		t.Run(host, func(t *testing.T) {
+			t.Parallel()
+
+			req := &ImageRequest{
+				SourceHost: host,
+				SourcePath: testPathCat,
+				Size:       Size{Width: 50, Height: 50},
+				Format:     FormatJPEG,
+				Quality:    85,
+				FitMode:    FitCover,
+			}
+
+			err := svc.ValidateRequest(req)
+			t.Logf("ValidateRequest() for host %q with no signature: %v",
+				host, err)
+
+			if err == nil {
+				t.Errorf("host %q served without a signature, want refused",
+					host)
+			}
+		})
+	}
+}
+
 func TestService_Get_InvalidFile(t *testing.T) {
 	t.Parallel()
 

internal/imgcache/storage.go

@@ -10,6 +10,7 @@ import (
 	"log/slog"
 	"os"
 	"path/filepath"
+	"strings"
 	"time"
 )
 
@@ -371,11 +372,13 @@ func HashPath(path string) PathHash {
 
 // CacheKey generates a unique key for a request variant.
 // Format: sha256(host:path:query:width:height:format:quality:fit_mode)
+// The path and query go through escapePercentAndColon, so that a ":" in
+// either cannot be taken for the one between them.
 func CacheKey(req *ImageRequest) VariantKey {
 	data := fmt.Sprintf("%s:%s:%s:%d:%d:%s:%d:%s",
 		req.SourceHost,
-		req.SourcePath,
-		req.SourceQuery,
+		escapePercentAndColon(req.SourcePath),
+		escapePercentAndColon(req.SourceQuery),
 		req.Size.Width,
 		req.Size.Height,
 		req.Format,
@@ -387,6 +390,14 @@ func CacheKey(req *ImageRequest) VariantKey {
 	return VariantKey(hex.EncodeToString(h[:]))
 }
 
+// escapePercentAndColon returns s with each "%" written as "%25" and each
+// ":" as "%3A", so that the result holds no ":".
+func escapePercentAndColon(s string) string {
+	s = strings.ReplaceAll(s, "%", "%25")
+
+	return strings.ReplaceAll(s, ":", "%3A")
+}
+
 // VariantStorage handles key-based file storage for processed image variants.
 // Files are stored at: <basedir>/<ab>/<cd>/<cache_key>
 // Metadata is stored at: <basedir>/<ab>/<cd>/<cache_key>.meta

internal/imgcache/storage_internal_test.go

@@ -407,6 +407,62 @@ func TestCacheKey(t *testing.T) {
 	}
 }
 
+// TestCacheKey_ColonOrPercentInPathOrQuery checks that two different source
+// URLs whose path or query holds ":" or "%" get different keys.
+func TestCacheKey_ColonOrPercentInPathOrQuery(t *testing.T) {
+	t.Parallel()
+
+	cases := []struct {
+		name          string
+		path1, query1 string
+		path2, query2 string
+	}{
+		{
+			name:  "colon moved from path to query",
+			path1: "/a:b", query1: "",
+			path2: "/a", query2: "b:",
+		},
+		{
+			name:  "colon in path and its percent-encoding",
+			path1: "/a:b", query1: "",
+			path2: "/a%3Ab", query2: "",
+		},
+	}
+
+	for _, tt := range cases {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			key1 := CacheKey(&ImageRequest{
+				SourceHost:  testHostCDN,
+				SourcePath:  tt.path1,
+				SourceQuery: tt.query1,
+				Size:        Size{Width: 800, Height: 600},
+				Format:      FormatWebP,
+				Quality:     85,
+				FitMode:     FitCover,
+			})
+			key2 := CacheKey(&ImageRequest{
+				SourceHost:  testHostCDN,
+				SourcePath:  tt.path2,
+				SourceQuery: tt.query2,
+				Size:        Size{Width: 800, Height: 600},
+				Format:      FormatWebP,
+				Quality:     85,
+				FitMode:     FitCover,
+			})
+
+			t.Logf("CacheKey() of path %q query %q = %s", tt.path1, tt.query1, key1)
+			t.Logf("CacheKey() of path %q query %q = %s", tt.path2, tt.query2, key2)
+
+			if key1 == key2 {
+				t.Errorf("CacheKey() gave path %q query %q and path %q query %q "+
+					"the same key", tt.path1, tt.query1, tt.path2, tt.query2)
+			}
+		})
+	}
+}
+
 // TestVariantStorage_StoreLogsFailedMetaWrite verifies that a .meta write
 // that fails is logged at warn and the store still succeeds.
 func TestVariantStorage_StoreLogsFailedMetaWrite(t *testing.T) {

internal/imgcache/urlparser.go

@@ -15,6 +15,7 @@ import (
 var (
 	ErrInvalidPath       = errors.New("invalid image path")
 	ErrMissingHost       = errors.New("missing source host")
+	ErrInvalidHost       = errors.New("invalid source host")
 	ErrMissingSize       = errors.New("missing size specification")
 	ErrInvalidSize       = errors.New("invalid size format")
 	ErrInvalidFormat     = errors.New("invalid or unsupported format")
@@ -143,6 +144,16 @@ func parseImageComponents(remainder string) (*ParsedURL, error) {
 		return nil, ErrMissingHost
 	}
 
+	// A URL reads what comes before "@" as a user name and password, and the
+	// rest as the host
+	if strings.Contains(host, "@") {
+		return nil, fmt.Errorf("%w: %q holds @", ErrInvalidHost, host)
+	}
+
+	// Host names do not depend on letter case, so the allowlist, the upstream
+	// connection limits and the cache see one spelling of each host
+	host = strings.ToLower(host)
+
 	// Extract query string if present in path
 	if qIndex := strings.Index(path, "?"); qIndex != -1 {
 		query = path[qIndex+1:]

internal/imgcache/urlparser_internal_test.go

@@ -234,6 +234,49 @@ func TestParseImagePath(t *testing.T) {
 	}
 }
 
+// TestParseImagePath_LowerCasesHost verifies that the host is lower-cased, so
+// that every spelling of its letter case is the same host to the allowlist,
+// the upstream connection limits and the cache, and that the path keeps its
+// case.
+func TestParseImagePath_LowerCasesHost(t *testing.T) {
+	t.Parallel()
+
+	got, err := ParseImagePath("CDN.Example.COM/Photos/Cat.jpg/800x600.webp")
+	if err != nil {
+		t.Fatalf("ParseImagePath() error = %v", err)
+	}
+
+	t.Logf("parsed host %q, path %q", got.Host, got.Path)
+
+	if got.Host != testHostCDN {
+		t.Errorf("Host = %q, want %q", got.Host, testHostCDN)
+	}
+
+	if got.Path != "/Photos/Cat.jpg" {
+		t.Errorf("Path = %q, want %q", got.Path, "/Photos/Cat.jpg")
+	}
+}
+
+// TestParseImagePath_RefusesUserinfo verifies that a host holding "@" is
+// refused: a URL reads what comes before the "@" as a user name and password
+// and the rest as the host.
+func TestParseImagePath_RefusesUserinfo(t *testing.T) {
+	t.Parallel()
+
+	for _, input := range []string{
+		"user@cdn.example.com/photos/cat.jpg/800x600.webp",
+		"user:password@cdn.example.com/photos/cat.jpg/800x600.webp",
+	} {
+		got, err := ParseImagePath(input)
+		t.Logf("ParseImagePath(%q) = %+v, error = %v", input, got, err)
+
+		if !errors.Is(err, ErrInvalidHost) {
+			t.Errorf("ParseImagePath(%q) error = %v, want %v",
+				input, err, ErrInvalidHost)
+		}
+	}
+}
+
 func TestParsedURL_ToImageRequest(t *testing.T) {
 	t.Parallel()
 

internal/signature/escaping_test.go

@@ -0,0 +1,113 @@
+package signature_test
+
+import (
+	"errors"
+	"testing"
+	"time"
+
+	"sneak.berlin/go/pixa/internal/signature"
+)
+
+// TestSigner_Verify_ColonCannotMovePathQueryBoundary checks that a URL
+// signed for path "/a:b" with no query does not verify for path "/a" with
+// query "b:", a different resource on the same host.
+func TestSigner_Verify_ColonCannotMovePathQueryBoundary(t *testing.T) {
+	t.Parallel()
+
+	signer := signature.New(goldenSigningKey)
+
+	signed := &signature.Request{
+		SourceHost: testHost,
+		SourcePath: "/a:b",
+		Width:      800,
+		Height:     600,
+		Format:     testFormatWebP,
+		Quality:    85,
+		FitMode:    testFitCover,
+		Expires:    time.Now().Add(1 * time.Hour),
+	}
+	signed.Signature = signer.Sign(signed)
+
+	replayed := *signed
+	replayed.SourcePath = "/a"
+	replayed.SourceQuery = "b:"
+
+	t.Logf("signature for path %q query %q: %s",
+		signed.SourcePath, signed.SourceQuery, signed.Signature)
+	t.Logf("signature for path %q query %q: %s",
+		replayed.SourcePath, replayed.SourceQuery, signer.Sign(&replayed))
+
+	err := signer.Verify(&replayed)
+	if !errors.Is(err, signature.ErrInvalid) {
+		t.Errorf("Verify() of path %q query %q with the signature for "+
+			"path %q = %v, want %v",
+			replayed.SourcePath, replayed.SourceQuery, signed.SourcePath,
+			err, signature.ErrInvalid)
+	}
+}
+
+// TestSigner_EscapedGoldenVectors pins the signature of requests whose path
+// or query holds ":" or "%", which are signed with "%" written as "%25" and
+// ":" as "%3A". The expected values were computed once, outside pixa, from
+// the signed data in each comment.
+func TestSigner_EscapedGoldenVectors(t *testing.T) {
+	t.Parallel()
+
+	signer := signature.New(goldenSigningKey)
+
+	vectors := []struct {
+		name          string
+		path          string
+		query         string
+		wantSignature string
+	}{
+		{
+			name: "colon in path",
+			path: "/photos/a:b.jpg",
+			// Signed data:
+			// "cdn.example.com:/photos/a%3Ab.jpg::800:600:webp:1704067200:85:cover"
+			wantSignature: "WnEpZ7bQp1Zvw8WDatlj2vu-4wYKWE3BFBizV8m__6k=",
+		},
+		{
+			name:  "colon in query",
+			path:  testPath,
+			query: "t=1:2",
+			// Signed data:
+			// "cdn.example.com:/photos/cat.jpg:t=1%3A2:800:600:webp:1704067200:85:cover"
+			wantSignature: "85kRoN8hhr4cCUkEUjNvUsvVYKjYYfWdeffx5TjJjqA=",
+		},
+		{
+			name:  "percent in path and query",
+			path:  "/photos/a%20b.jpg",
+			query: "q=50%",
+			// Signed data:
+			// "cdn.example.com:/photos/a%2520b.jpg:q=50%25:800:600:webp:1704067200:85:cover"
+			wantSignature: "MjDiiRdgXMrsjqPMsENtD4aG1hp1e-a6zy67vKTX4CQ=",
+		},
+	}
+
+	for _, tt := range vectors {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			req := &signature.Request{
+				SourceHost:  testHost,
+				SourcePath:  tt.path,
+				SourceQuery: tt.query,
+				Width:       800,
+				Height:      600,
+				Format:      testFormatWebP,
+				Quality:     85,
+				FitMode:     testFitCover,
+				Expires:     time.Unix(goldenExpiresUnix, 0),
+			}
+
+			gotSignature := signer.Sign(req)
+			t.Logf("Sign() of path %q query %q = %s", tt.path, tt.query, gotSignature)
+
+			if gotSignature != tt.wantSignature {
+				t.Errorf("Sign() = %q, want %q", gotSignature, tt.wantSignature)
+			}
+		})
+	}
+}

internal/signature/signature.go

@@ -10,6 +10,7 @@ import (
 	"fmt"
 	"net/url"
 	"strconv"
+	"strings"
 	"time"
 )
 
@@ -154,15 +155,17 @@ func (s *Signer) GenerateSignedURL(
 
 // buildSignatureData creates the string to be signed.
 // Format: "host:path:query:width:height:format:expiration:quality:fit"
-// All components are used verbatim (exact match). No normalization,
-// suffix matching, or wildcard expansion is performed. Quality and fit
-// are the effective transform values, so replaying a signed URL with a
-// different quality or fit mode fails verification.
+// The path and query go through escapePercentAndColon, so that a ":" in
+// either cannot be taken for the one between them; every other component
+// is used verbatim. No normalization, suffix matching, or wildcard
+// expansion is performed. Quality and fit are the effective transform
+// values, so replaying a signed URL with a different quality or fit mode
+// fails verification.
 func (s *Signer) buildSignatureData(req *Request) string {
 	return fmt.Sprintf("%s:%s:%s:%d:%d:%s:%d:%d:%s",
 		req.SourceHost,
-		req.SourcePath,
-		req.SourceQuery,
+		escapePercentAndColon(req.SourcePath),
+		escapePercentAndColon(req.SourceQuery),
 		req.Width,
 		req.Height,
 		req.Format,
@@ -172,6 +175,14 @@ func (s *Signer) buildSignatureData(req *Request) string {
 	)
 }
 
+// escapePercentAndColon returns s with each "%" written as "%25" and each
+// ":" as "%3A", so that the result holds no ":".
+func escapePercentAndColon(s string) string {
+	s = strings.ReplaceAll(s, "%", "%25")
+
+	return strings.ReplaceAll(s, ":", "%3A")
+}
+
 // ParseParams extracts signature and expiration from query parameters.
 func ParseParams(sig, expStr string) (string, time.Time, error) {
 	if expStr == "" {