latest

fix-raspian-defaults/rc.local.txt

@@ -8,6 +8,16 @@ else
         /etc/systemd/system/multi-user.target.wants/raspberrypi-initial-setup.service
     # we only need to run once
     rm -rf /boot/rc.local.txt /boot/root.overlay
+
+    # after the above rsync has replaced the init_resize.sh with our
+    # more sane version (it only doubles the size of the root, not
+    # consuming the entire sd card), set the kernel command line to use the
+    # init resizer on the next boot (like raspbian normally does)
+
+    # this will only run this once, as we have already deleted ourselves in
+    # the previous command.
+    sed -i 's|$| init=/usr/lib/raspi-config/init_resize.sh|' /boot/cmdline.txt
+
 fi
 
 reboot

fix-raspian-defaults/root.overlay/boot/per-once.d/00-resize2fs.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+resize2fs /dev/mmcblk0p2

fix-raspian-defaults/root.overlay/usr/lib/raspi-config/init_resize.sh

@@ -0,0 +1,200 @@
+#!/bin/sh
+
+reboot_pi () {
+  umount /boot
+  mount / -o remount,ro
+  sync
+  if [ "$NOOBS" = "1" ]; then
+    if [ "$NEW_KERNEL" = "1" ]; then
+      reboot -f "$BOOT_PART_NUM"
+    else
+      echo "$BOOT_PART_NUM" > "/sys/module/${BCM_MODULE}/parameters/reboot_part"
+    fi
+  fi
+  echo b > /proc/sysrq-trigger
+  sleep 5
+  exit 0
+}
+
+check_commands () {
+  if ! command -v whiptail > /dev/null; then
+      echo "whiptail not found"
+      sleep 5
+      return 1
+  fi
+  for COMMAND in grep cut sed parted fdisk findmnt partprobe; do
+    if ! command -v $COMMAND > /dev/null; then
+      FAIL_REASON="$COMMAND not found"
+      return 1
+    fi
+  done
+  return 0
+}
+
+check_noobs () {
+  if [ "$BOOT_PART_NUM" = "1" ]; then
+    NOOBS=0
+  else
+    NOOBS=1
+  fi
+}
+
+get_variables () {
+  ROOT_PART_DEV=$(findmnt / -o source -n)
+  ROOT_PART_NAME=$(echo "$ROOT_PART_DEV" | cut -d "/" -f 3)
+  ROOT_DEV_NAME=$(echo /sys/block/*/"${ROOT_PART_NAME}" | cut -d "/" -f 4)
+  ROOT_DEV="/dev/${ROOT_DEV_NAME}"
+  ROOT_PART_NUM=$(cat "/sys/block/${ROOT_DEV_NAME}/${ROOT_PART_NAME}/partition")
+
+  BOOT_PART_DEV=$(findmnt /boot -o source -n)
+  BOOT_PART_NAME=$(echo "$BOOT_PART_DEV" | cut -d "/" -f 3)
+  BOOT_DEV_NAME=$(echo /sys/block/*/"${BOOT_PART_NAME}" | cut -d "/" -f 4)
+  BOOT_PART_NUM=$(cat "/sys/block/${BOOT_DEV_NAME}/${BOOT_PART_NAME}/partition")
+
+  OLD_DISKID=$(fdisk -l "$ROOT_DEV" | sed -n 's/Disk identifier: 0x\([^ ]*\)/\1/p')
+
+  check_noobs
+
+  ROOT_DEV_SIZE=$(cat "/sys/block/${ROOT_DEV_NAME}/size")
+
+  PARTITION_TABLE=$(parted -m "$ROOT_DEV" unit s print | tr -d 's')
+
+  LAST_PART_NUM=$(echo "$PARTITION_TABLE" | tail -n 1 | cut -d ":" -f 1)
+
+  ROOT_PART_LINE=$(echo "$PARTITION_TABLE" | grep -e "^${ROOT_PART_NUM}:")
+  ROOT_PART_START=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 2)
+  ROOT_PART_END=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 3)
+
+
+  ROOT_PART_CUR_SIZE=$((ROOT_PART_END - $ROOT_PART_START))
+  ROOT_PART_WANT_SIZE=$((ROOT_PART_CUR_SIZE * 4))
+  TARGET_END=$((ROOT_PART_START + $ROOT_PART_WANT_SIZE))
+
+  if [ "$NOOBS" = "1" ]; then
+    EXT_PART_LINE=$(echo "$PARTITION_TABLE" | grep ":::;" | head -n 1)
+    EXT_PART_NUM=$(echo "$EXT_PART_LINE" | cut -d ":" -f 1)
+    EXT_PART_START=$(echo "$EXT_PART_LINE" | cut -d ":" -f 2)
+    EXT_PART_END=$(echo "$EXT_PART_LINE" | cut -d ":" -f 3)
+  fi
+}
+
+fix_partuuid() {
+  DISKID="$(fdisk -l "$ROOT_DEV" | sed -n 's/Disk identifier: 0x\([^ ]*\)/\1/p')"
+
+  sed -i "s/${OLD_DISKID}/${DISKID}/g" /etc/fstab
+  sed -i "s/${OLD_DISKID}/${DISKID}/" /boot/cmdline.txt
+}
+
+check_variables () {
+  if [ "$NOOBS" = "1" ]; then
+    if [ "$EXT_PART_NUM" -gt 4 ] || \
+       [ "$EXT_PART_START" -gt "$ROOT_PART_START" ] || \
+       [ "$EXT_PART_END" -lt "$ROOT_PART_END" ]; then
+      FAIL_REASON="Unsupported extended partition"
+      return 1
+    fi
+  fi
+
+  if [ "$BOOT_DEV_NAME" != "$ROOT_DEV_NAME" ]; then
+      FAIL_REASON="Boot and root partitions are on different devices"
+      return 1
+  fi
+
+  if [ "$ROOT_PART_NUM" -ne "$LAST_PART_NUM" ]; then
+    FAIL_REASON="Root partition should be last partition"
+    return 1
+  fi
+
+  if [ "$ROOT_PART_END" -gt "$TARGET_END" ]; then
+    FAIL_REASON="Root partition runs past the end of device"
+    return 1
+  fi
+
+  if [ ! -b "$ROOT_DEV" ] || [ ! -b "$ROOT_PART_DEV" ] || [ ! -b "$BOOT_PART_DEV" ] ; then
+    FAIL_REASON="Could not determine partitions"
+    return 1
+  fi
+}
+
+check_kernel () {
+  local MAJOR=$(uname -r | cut -f1 -d.)
+  local MINOR=$(uname -r | cut -f2 -d.)
+  if [ "$MAJOR" -eq "4" ] && [ "$MINOR" -lt "9" ]; then
+    return 0
+  fi
+  if [ "$MAJOR" -lt "4" ]; then
+    return 0
+  fi
+  NEW_KERNEL=1
+}
+
+main () {
+  get_variables
+
+  if ! check_variables; then
+    return 1
+  fi
+
+  check_kernel
+
+  if [ "$NOOBS" = "1" ] && [ "$NEW_KERNEL" != "1" ]; then
+    BCM_MODULE=$(grep -e "^Hardware" /proc/cpuinfo | cut -d ":" -f 2 | tr -d " " | tr '[:upper:]' '[:lower:]')
+    if ! modprobe "$BCM_MODULE"; then
+      FAIL_REASON="Couldn't load BCM module $BCM_MODULE"
+      return 1
+    fi
+  fi
+
+  if [ "$ROOT_PART_END" -eq "$TARGET_END" ]; then
+    reboot_pi
+  fi
+
+  if [ "$NOOBS" = "1" ]; then
+    if ! parted -m "$ROOT_DEV" u s resizepart "$EXT_PART_NUM" yes "$TARGET_END"; then
+      FAIL_REASON="Extended partition resize failed"
+      return 1
+    fi
+  fi
+
+  if ! parted -m "$ROOT_DEV" u s resizepart "$ROOT_PART_NUM" "$TARGET_END"; then
+    FAIL_REASON="Root partition resize failed"
+    return 1
+  fi
+
+  partprobe "$ROOT_DEV"
+  fix_partuuid
+
+  return 0
+}
+
+mount -t proc proc /proc
+mount -t sysfs sys /sys
+mount -t tmpfs tmp /run
+mkdir -p /run/systemd
+
+mount /boot
+mount / -o remount,rw
+
+sed -i 's| init=/usr/lib/raspi-config/init_resize\.sh||' /boot/cmdline.txt
+sed -i 's| sdhci\.debug_quirks2=4||' /boot/cmdline.txt
+
+if ! grep -q splash /boot/cmdline.txt; then
+  sed -i "s/ quiet//g" /boot/cmdline.txt
+fi
+sync
+
+echo 1 > /proc/sys/kernel/sysrq
+
+if ! check_commands; then
+  reboot_pi
+fi
+
+if main; then
+  whiptail --infobox "Resized root filesystem. Rebooting in 5 seconds..." 20 60
+  sleep 5
+else
+  sleep 5
+  whiptail --msgbox "Could not expand filesystem, please try raspi-config or rc_gui.\n${FAIL_REASON}" 20 60
+fi
+
+reboot_pi