Keep going past unreadable files with check --continue (closes #11)

With --continue, check stopped at the first file whose content or
checksum attribute it could not read, and at the first directory it
could not list. Each of these now counts as failed, its error, which
names the path, goes to stderr, and the walk goes on; the run still
exits non-zero. The walk shared with sum and clear takes the continue
setting, and they pass false. If the count that sizes the progress bar
cannot read a path, check --continue runs without the bar. Without
--continue the first such error still stops the run, and the summary
printed before it now counts an unreadable checksum attribute as
failed, as it already did for unreadable content.

Model: opus-5-5

.golangci.yml

@@ -1,32 +1,98 @@
 version: "2"
 
+# Config schema uses the golangci-lint v2 layout (settings live under
+# linters.settings, not top-level linters-settings) so that the
+# thresholds below are actually applied by golangci-lint >= v2.
+
 run:
   timeout: 5m
   modules-download-mode: readonly
 
 linters:
   default: all
+  enable:
+    # Successor to the deprecated gomodguard. Named explicitly, rather than
+    # left to `default: all`, because it carries the module policy below.
+    - gomodguard_v2
   disable:
     # Genuinely incompatible with project patterns
     - exhaustruct      # Requires all struct fields
-    - depguard         # Dependency allow/block lists
     - godot            # Requires comments to end with periods
-    - wsl              # Deprecated, replaced by wsl_v5
     - wrapcheck        # Too verbose for internal packages
     - varnamelen       # Short names like db, id are idiomatic Go
-
-linters-settings:
-  lll:
-    line-length: 88
-  funlen:
-    lines: 80
-    statements: 50
-  cyclop:
-    max-complexity: 15
-  dupl:
-    threshold: 100
+    # Deprecated: the warning is attached to the old name, so it is
+    # silenced by disabling that name, not by enabling the successor.
+    - wsl              # Deprecated, replaced by wsl_v5
+    - gomodguard       # Deprecated, replaced by gomodguard_v2
+  settings:
+    lll:
+      line-length: 88
+    funlen:
+      lines: 80
+      statements: 50
+    cyclop:
+      max-complexity: 15
+    dupl:
+      threshold: 100
+    depguard:
+      # Test-support code must not be compiled into the shipped binary. A
+      # test-support package exists to hand a test privileges the program
+      # itself must never have, so a file that is not a test must not import
+      # one. Test files, and the files inside a package whose directory name
+      # ends in `test`, are where that code belongs, and are exempt.
+      #
+      # The deny list below is the one part of this file a repository is
+      # expected to extend, and the only part it may. depguard matches an
+      # import path against a list of prefixes, so it cannot be told "any path
+      # whose last segment ends in test"; a repository's own test-support
+      # packages have to be named here one at a time, by full import path,
+      # under a module path that differs from repository to repository. Add
+      # them; change nothing else.
+      rules:
+        test-support:
+          list-mode: lax
+          files:
+            - "$all"
+            - "!$test"
+            - "!**/*test/**"
+          deny:
+            - pkg: net/http/httptest
+              desc: >-
+                Test-support code belongs in test files and in packages whose
+                directory name ends in test, not in the shipped binary.
+    # Only decisions already recorded in the Go package defaults are
+    # listed here. Every entry matches the module path exactly.
+    gomodguard_v2:
+      blocked:
+        - module: github.com/rs/zerolog
+          recommendations:
+            - log/slog
+          reason: "Structured logging is stdlib log/slog."
+        # One entry per pre-fork module path, because the later releases
+        # are separate paths. A prefix match would be shorter but would
+        # also reach github.com/go-redis/redismock, the test double for
+        # the successor these entries recommend.
+        - module: github.com/go-redis/redis
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/go-redis/redis/v7
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/go-redis/redis/v8
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/sergi/go-diff
+          recommendations:
+            - github.com/aymanbagabas/go-udiff
+          reason: "No unified diff output; use go-udiff."
+        - module: github.com/hexops/gotextdiff
+          recommendations:
+            - github.com/aymanbagabas/go-udiff
+          reason: "Unmaintained fork; use go-udiff."
 
 issues:
-  exclude-use-default: false
   max-issues-per-linter: 0
   max-same-issues: 0

Dockerfile

@@ -4,8 +4,8 @@ FROM golang@sha256:f6751d823c26342f9506c03797d2527668d095b0a15f1862cddb4d927a7a4
 
 RUN apk add --no-cache git make gcc musl-dev binutils-gold
 
-# golangci-lint v2.10.1
-RUN go install github.com/golangci/golangci-lint/v2/cmd/golangci-lint@5d1e709b7be35cb2025444e19de266b056b7b7ee
+# golangci-lint v2.12.2, 2026-10-05
+RUN go install github.com/golangci/golangci-lint/v2/cmd/golangci-lint@c0d3ddc9cf3faa61a4e378e879ece580256d76e5
 # goimports v0.42.0
 RUN go install golang.org/x/tools/cmd/goimports@009367f5c17a8d4c45a961a3a509277190a9a6f0
 

TODO.md

@@ -27,6 +27,11 @@ today) with lint, fmt, fmt-check, check, and hooks targets.
 * 2026-10-06: `check --continue` keeps going past a file or directory
     it cannot read: it counts it as failed, prints the error and the
     path on stderr, and checks the rest of the tree
+* 2026-10-05: golangci-lint settings take effect: canonical
+    `.golangci.yml` (v2 layout, settings under `linters.settings`),
+    golangci-lint pinned at v2.12.2 in `Dockerfile` and
+    `script/bootstrap`, and the code fixed for what the settings now
+    report (long lines in `attrsum.go` rewrapped)
 * 2026-10-05: `make try` runs on three small files in a temporary
     directory that it removes afterwards, also when a step fails,
     instead of on a fixed directory on one person's machine

attrsum.go

@@ -76,7 +76,8 @@ func (s *Stats) Print(opts *options, operation string) {
 		return
 	}
 
-	fmt.Fprintf(os.Stderr, "\n%s complete: %d files processed, %d skipped, %d failed, %s bytes in %s\n",
+	fmt.Fprintf(os.Stderr,
+		"\n%s complete: %d files processed, %d skipped, %d failed, %s bytes in %s\n",
 		operation,
 		s.FilesProcessed,
 		s.FilesSkipped,
@@ -171,11 +172,15 @@ func expandPaths(args []string) ([]string, error) {
 }
 
 // processFunc processes a single path within a command's run loop.
-type processFunc func(opts *options, path string, stats *Stats, bar *progressbar.ProgressBar) error
+type processFunc func(
+	opts *options, path string, stats *Stats, bar *progressbar.ProgressBar,
+) error
 
 // countAndBar counts the files under paths and returns a progress bar sized
 // to that total. It always returns either a non-nil bar or a non-nil error.
-func countAndBar(opts *options, paths []string, desc string) (*progressbar.ProgressBar, error) {
+func countAndBar(
+	opts *options, paths []string, desc string,
+) (*progressbar.ProgressBar, error) {
 	total, err := countFilesMultiple(opts, paths)
 	if err != nil {
 		return nil, err
@@ -193,7 +198,9 @@ func finishBar(bar *progressbar.ProgressBar) {
 
 // runOverPaths runs process over each path, sharing the progress/stats
 // bookkeeping common to the sum-add, sum-update and clear commands.
-func runOverPaths(opts *options, args []string, desc, op string, process processFunc) error {
+func runOverPaths(
+	opts *options, args []string, desc, op string, process processFunc,
+) error {
 	paths, err := expandPaths(args)
 	if err != nil {
 		return err
@@ -258,46 +265,54 @@ func newSumCmd(opts *options) *cobra.Command {
 	return cmd
 }
 
-func processSumAdd(opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar) error {
-	return walkAndProcess(opts, dir, false, stats, bar, func(p string, info os.FileInfo, s *Stats) error {
-		if hasXattr(p, checksumKey) {
-			atomic.AddInt64(&s.FilesSkipped, 1)
+func processSumAdd(
+	opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar,
+) error {
+	return walkAndProcess(opts, dir, false, stats, bar,
+		func(p string, info os.FileInfo, s *Stats) error {
+			if hasXattr(p, checksumKey) {
+				atomic.AddInt64(&s.FilesSkipped, 1)
 
-			return nil
-		}
+				return nil
+			}
 
-		err := writeChecksumAndTime(opts, p, info, s)
-		if err != nil {
-			atomic.AddInt64(&s.FilesFailed, 1)
-
-			return err
-		}
-
-		return nil
-	})
-}
-
-func processSumUpdate(opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar) error {
-	return walkAndProcess(opts, dir, false, stats, bar, func(p string, info os.FileInfo, s *Stats) error {
-		t, err := readSumTime(p)
-		if err != nil || info.ModTime().After(t) {
-			werr := writeChecksumAndTime(opts, p, info, s)
-			if werr != nil {
+			err := writeChecksumAndTime(opts, p, info, s)
+			if err != nil {
 				atomic.AddInt64(&s.FilesFailed, 1)
 
-				return werr
+				return err
 			}
 
 			return nil
-		}
-
-		atomic.AddInt64(&s.FilesSkipped, 1)
-
-		return nil
-	})
+		})
 }
 
-func writeChecksumAndTime(opts *options, path string, info os.FileInfo, stats *Stats) error {
+func processSumUpdate(
+	opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar,
+) error {
+	return walkAndProcess(opts, dir, false, stats, bar,
+		func(p string, info os.FileInfo, s *Stats) error {
+			t, err := readSumTime(p)
+			if err != nil || info.ModTime().After(t) {
+				werr := writeChecksumAndTime(opts, p, info, s)
+				if werr != nil {
+					atomic.AddInt64(&s.FilesFailed, 1)
+
+					return werr
+				}
+
+				return nil
+			}
+
+			atomic.AddInt64(&s.FilesSkipped, 1)
+
+			return nil
+		})
+}
+
+func writeChecksumAndTime(
+	opts *options, path string, info os.FileInfo, stats *Stats,
+) error {
 	// Record mtime before hashing to detect modifications during hash.
 	mtimeBefore := info.ModTime()
 
@@ -368,24 +383,27 @@ func newClearCmd(opts *options) *cobra.Command {
 	}
 }
 
-func processClear(opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar) error {
-	return walkAndProcess(opts, dir, false, stats, bar, func(p string, info os.FileInfo, s *Stats) error {
-		cleared, err := clearOne(opts, p)
-		if err != nil {
-			atomic.AddInt64(&s.FilesFailed, 1)
+func processClear(
+	opts *options, dir string, stats *Stats, bar *progressbar.ProgressBar,
+) error {
+	return walkAndProcess(opts, dir, false, stats, bar,
+		func(p string, info os.FileInfo, s *Stats) error {
+			cleared, err := clearOne(opts, p)
+			if err != nil {
+				atomic.AddInt64(&s.FilesFailed, 1)
 
-			return err
-		}
+				return err
+			}
 
-		if cleared {
-			atomic.AddInt64(&s.FilesProcessed, 1)
-			atomic.AddInt64(&s.BytesProcessed, info.Size())
-		} else {
-			atomic.AddInt64(&s.FilesSkipped, 1)
-		}
+			if cleared {
+				atomic.AddInt64(&s.FilesProcessed, 1)
+				atomic.AddInt64(&s.BytesProcessed, info.Size())
+			} else {
+				atomic.AddInt64(&s.FilesSkipped, 1)
+			}
 
-		return nil
-	})
+			return nil
+		})
 }
 
 // clearOne removes both checksum xattrs from a single path, reporting
@@ -433,7 +451,8 @@ func newCheckCmd(opts *options) *cobra.Command {
 			return runCheck(opts, a, cont)
 		},
 	}
-	cmd.Flags().BoolVar(&cont, "continue", false, "continue after errors and report each file")
+	cmd.Flags().BoolVar(&cont, "continue", false,
+		"continue after errors and report each file")
 
 	return cmd
 }
@@ -479,13 +498,16 @@ func runCheck(opts *options, args []string, cont bool) error {
 	return finalErr
 }
 
-func processCheck(opts *options, dir string, cont bool, stats *Stats, bar *progressbar.ProgressBar) error {
+func processCheck(
+	opts *options, dir string, cont bool, stats *Stats, bar *progressbar.ProgressBar,
+) error {
 	// Track initial failed count to detect failures during this walk.
 	initialFailed := atomic.LoadInt64(&stats.FilesFailed)
 
-	err := walkAndProcess(opts, dir, cont, stats, bar, func(p string, _ os.FileInfo, s *Stats) error {
-		return checkOne(opts, p, cont, s)
-	})
+	err := walkAndProcess(opts, dir, cont, stats, bar,
+		func(p string, _ os.FileInfo, s *Stats) error {
+			return checkOne(opts, p, cont, s)
+		})
 	if err != nil {
 		if errors.Is(err, errVerification) {
 			return errVerification
@@ -763,7 +785,8 @@ func hasXattr(path, key string) bool {
 func fileMultihash(path string) ([]byte, int64, error) {
 	// The path is supplied by the operator as the tree to checksum; reading
 	// it is the entire purpose of the tool.
-	f, err := os.Open(path) //nolint:gosec // G304: operator-specified path is the intended input
+	//nolint:gosec // G304: operator-specified path is the intended input
+	f, err := os.Open(path)
 	if err != nil {
 		return nil, 0, err
 	}

script/bootstrap

@@ -9,9 +9,9 @@ set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
-# Pinned versions, 2026-07-07 (same pins as the Dockerfile)
-# golangci-lint v2.10.1
-GOLANGCI_LINT_REF="github.com/golangci/golangci-lint/v2/cmd/golangci-lint@5d1e709b7be35cb2025444e19de266b056b7b7ee"
+# Pinned versions, 2026-10-05 (same pins as the Dockerfile)
+# golangci-lint v2.12.2
+GOLANGCI_LINT_REF="github.com/golangci/golangci-lint/v2/cmd/golangci-lint@c0d3ddc9cf3faa61a4e378e879ece580256d76e5"
 # goimports v0.42.0
 GOIMPORTS_REF="golang.org/x/tools/cmd/goimports@009367f5c17a8d4c45a961a3a509277190a9a6f0"