fix: each browser-suite run builds and removes an image of its own (closes #547)

script/test-e2e and script/test-e2e-firefox tagged their image with one
fixed name. When two clones ran a suite at once, the second build moved
that tag, the image store deleted the first run's now-untagged image, and
that suite exited 125 without running a test. Each run now tags its image
with the suite's name and twelve random hex digits and runs it by that
tag. The cleanup that runs on exit, Ctrl-C, kill and a closed terminal
removes the run's container if docker's client left it running, then the
image. The image-ID file that guarded against a moving tag is gone.
README.md's End-to-End Tests section says which endings clean up.

Model: opus-5-5

README.md

@@ -347,6 +347,14 @@ are outside `make check`. Neither opens the popup from the toolbar button: both
 load its page in an ordinary tab, so what the toolbar popup itself adds, its
 size and its closing when it loses focus, is covered by neither.
 
+Each run builds its image under a tag of its own, `autistmask-e2e-chrome:` or
+`autistmask-e2e-firefox:` followed by twelve random hex digits, so two clones
+can run the same suite at once without one build taking the other's image away.
+The run removes that image, and its container if one is still running, after the
+suite passes or fails, on Ctrl-C, on `kill`, and when the terminal or SSH
+session it runs in closes. A run killed outright (`kill -9`) cannot clean up:
+its image stays under its tag until removed by hand with `docker image rm`.
+
 ### Chrome (`make test-e2e`)
 
 `make test-e2e` builds `dist/chrome/` and drives the **real popup in a real
@@ -1464,10 +1472,8 @@ view would leave a wallet one click from deletion.
 - **Transitions**:
     - "Import" with a valid entry and a matching password of at least 12
       characters → creates the wallet, clears the navigation stack, and →
-      **Home**. When no address is active yet, as on the first wallet, the new
-      wallet's first address becomes the active one. The phrase and xprv modes
-      then scan for further used addresses and report the count as a flash
-      message.
+      **Home**. The phrase and xprv modes then scan for further used addresses
+      and report the count as a flash message.
     - "Import" with a missing, short or mismatched password → full-sentence
       error on the error line, no screen change
     - "Import" with an invalid entry or a duplicate wallet or address → flash

script/test-e2e

@@ -22,13 +22,29 @@ set -eu
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
 ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
 
-IMAGE="$("$SCRIPT_DIR/projectname")-e2e-chrome"
-
-IIDFILE=""
+# Each run builds, runs and then removes an image under a tag of its own.
+# Under one tag shared by every run, a second clone's build moves the tag
+# off this run's image, and the image store can then delete that untagged
+# image before or while this run uses it. The tag is random rather than
+# $$ because CI jobs share one docker daemon, but each job's container
+# numbers its processes from scratch.
+SUFFIX="$(od -An -N6 -tx1 /dev/urandom | tr -d ' \n')"
+NAME="$("$SCRIPT_DIR/projectname")-e2e-chrome"
+IMAGE="$NAME:$SUFFIX"
+# Both docker runs below use this container name: docker run --rm returns
+# only once its container is removed, so the second never meets the first.
+CONTAINER="$NAME-$SUFFIX"
 
 cleanup() {
-    if [ -n "$IIDFILE" ]; then
-        rm -f "$IIDFILE"
+    # After a third Ctrl-C docker's client exits whether or not the
+    # container has stopped, and a container still running keeps the image
+    # in use.
+    if docker container inspect "$CONTAINER" >/dev/null 2>&1; then
+        docker container rm -f "$CONTAINER" >/dev/null
+    fi
+    # No image to remove when the build failed or was interrupted.
+    if docker image inspect "$IMAGE" >/dev/null 2>&1; then
+        docker image rm "$IMAGE" >/dev/null
     fi
 }
 
@@ -40,22 +56,16 @@ main() {
         exit 1
     fi
 
-    IIDFILE="$(mktemp)"
     trap cleanup EXIT
-    trap 'cleanup; exit 130' INT TERM
+    # HUP: the terminal or SSH session running the suite closed.
+    trap 'cleanup; exit 130' HUP INT TERM
 
     echo "Building the Chrome e2e image (extension included)..."
     # --no-cache: the image build runs make build and its checks, and a
     # cached layer is a check that did not run.
-    docker build --no-cache --iidfile "$IIDFILE" -t "$IMAGE" \
-        -f tests/e2e/Dockerfile .
+    docker build --no-cache -t "$IMAGE" -f tests/e2e/Dockerfile .
 
     echo "Running e2e suite in the pinned Playwright container..."
-    # The image is run by ID, not by tag: where two clones of this repo run
-    # the suite at once, the other build can move the tag between this
-    # build and this run, and the suite would then silently test the other
-    # checkout.
-    #
     # --ipc=host: Chromium's shared-memory needs more than the default
     #   64MB /dev/shm or renderers crash.
     # HOME=/tmp: the image's root home is not a reliable place for the
@@ -75,11 +85,12 @@ main() {
     #   probe. The image is pinned by digest, so this can only ever bite
     #   on a deliberate bump.
     docker run --rm \
+        --name "$CONTAINER" \
         --ipc=host \
         -e HOME=/tmp \
         -e PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1 \
         -e "E2E_TRACE_NETWORK=${E2E_TRACE_NETWORK:-0}" \
-        "$(cat "$IIDFILE")" \
+        "$IMAGE" \
         node tests/e2e/run.js
 
     # Where chrome.storage.local lives, and what moves it: two unpacked loads
@@ -93,9 +104,10 @@ main() {
     # --host-resolver-rules=MAP * ~NOTFOUND so nothing it does can leave.
     echo "Running the extension-id and storage-partition observations..."
     docker run --rm \
+        --name "$CONTAINER" \
         --ipc=host \
         -e HOME=/tmp \
-        "$(cat "$IIDFILE")" \
+        "$IMAGE" \
         node tests/e2e/storagePartition.js
 }
 

script/test-e2e-firefox

@@ -21,13 +21,23 @@ set -eu
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
 ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
 
-IMAGE="$("$SCRIPT_DIR/projectname")-e2e-firefox"
-
-IIDFILE=""
+# A tag and a container name of this run's own, as in script/test-e2e,
+# which says why.
+SUFFIX="$(od -An -N6 -tx1 /dev/urandom | tr -d ' \n')"
+NAME="$("$SCRIPT_DIR/projectname")-e2e-firefox"
+IMAGE="$NAME:$SUFFIX"
+CONTAINER="$NAME-$SUFFIX"
 
 cleanup() {
-    if [ -n "$IIDFILE" ]; then
-        rm -f "$IIDFILE"
+    # After a third Ctrl-C docker's client exits whether or not the
+    # container has stopped, and a container still running keeps the image
+    # in use.
+    if docker container inspect "$CONTAINER" >/dev/null 2>&1; then
+        docker container rm -f "$CONTAINER" >/dev/null
+    fi
+    # No image to remove when the build failed or was interrupted.
+    if docker image inspect "$IMAGE" >/dev/null 2>&1; then
+        docker image rm "$IMAGE" >/dev/null
     fi
 }
 
@@ -39,22 +49,16 @@ main() {
         exit 1
     fi
 
-    IIDFILE="$(mktemp)"
     trap cleanup EXIT
-    trap 'cleanup; exit 130' INT TERM
+    # HUP: the terminal or SSH session running the suite closed.
+    trap 'cleanup; exit 130' HUP INT TERM
 
     echo "Building the pinned Firefox e2e image (extension included)..."
     # --no-cache: the image build runs make build and its checks, and a
     # cached layer is a check that did not run.
-    docker build --no-cache --iidfile "$IIDFILE" -t "$IMAGE" \
-        -f tests/e2e/firefox/Dockerfile .
+    docker build --no-cache -t "$IMAGE" -f tests/e2e/firefox/Dockerfile .
 
     echo "Running the Firefox e2e suite..."
-    # The image is run by ID, not by tag: where two clones of this repo run
-    # the suite at once, the other build can move the tag between this
-    # build and this run, and the suite would then silently test the other
-    # checkout.
-    #
     # --shm-size=1g: Firefox needs more than the default 64MB /dev/shm.
     # --network none: the suite stubs nothing, so this is what keeps the
     #   run offline and deterministic. The extension swallows its own
@@ -69,10 +73,11 @@ main() {
     # "CanCreateUserNamespace() clone() failure: EPERM" on startup here;
     # it is cosmetic and headless Firefox runs fine without it.
     docker run --rm \
+        --name "$CONTAINER" \
         --shm-size=1g \
         --network none \
         -e HOME=/tmp \
-        "$(cat "$IIDFILE")" \
+        "$IMAGE" \
         node tests/e2e/firefox/run.js dist/firefox
 
     # The install/uninstall/re-install property, against the packaged XPI
@@ -82,10 +87,11 @@ main() {
     # and the suite above shares one session throughout.
     echo "Running the Firefox re-install suite against the packaged XPI..."
     docker run --rm \
+        --name "$CONTAINER" \
         --shm-size=1g \
         --network none \
         -e HOME=/tmp \
-        "$(cat "$IIDFILE")" \
+        "$IMAGE" \
         node tests/e2e/firefox/reinstall.js
 }
 

src/popup/index.html

@@ -1716,7 +1716,10 @@
                     <div class="text-xs text-muted mb-1">
                         Address that will be shared:
                     </div>
-                    <div id="approve-address" class="text-xs mb-2"></div>
+                    <div
+                        id="approve-address"
+                        class="text-xs flex items-center mb-2"
+                    ></div>
                 </div>
                 <div class="mb-3">
                     <label

src/popup/views/addWallet.js

@@ -189,9 +189,6 @@ async function importMnemonic(ctx) {
     };
     state.wallets.push(wallet);
     state.hasWallet = true;
-    if (state.activeAddress === null) {
-        state.activeAddress = firstAddress;
-    }
     await saveState();
     clearViewStack();
     ctx.renderWalletList();
@@ -251,9 +248,6 @@ async function importPrivateKey(ctx) {
         addresses: [{ address: addr, balance: "0.0000", tokenBalances: [] }],
     });
     state.hasWallet = true;
-    if (state.activeAddress === null) {
-        state.activeAddress = addr;
-    }
     await saveState();
     clearViewStack();
     ctx.renderWalletList();
@@ -310,9 +304,6 @@ async function importXprvKey(ctx) {
     };
     state.wallets.push(wallet);
     state.hasWallet = true;
-    if (state.activeAddress === null) {
-        state.activeAddress = firstAddress;
-    }
     await saveState();
     clearViewStack();
     ctx.renderWalletList();

tests/e2e/run.js

@@ -3857,9 +3857,6 @@ test("eth_requestAccounts approved returns the selected address (#183)", async (
             shown.toLowerCase().includes(env.expectedAddress.toLowerCase()),
             "the site prompt shows the wrong address: " + JSON.stringify(shown),
         );
-        // The text above is there even when the row is too narrow to show it
-        // all; this measures that the whole address is visible (#517).
-        await assertAddressesFit(popup, "the connection prompt");
 
         // Remembered, so the connection survives a background worker that MV3
         // terminates after 30 seconds idle. The in-memory connectedSites map

tests/firstWalletActiveAddress.test.js

@@ -1,69 +0,0 @@
-// Adding the first wallet left no address active until the popup was reopened,
-// so Send and Receive on Home only said "No active address selected."
-// (https://git.eeqj.de/sneak/AutistMask/issues/512). Each test boots a fresh
-// install, adds the first wallet through one of the three import tabs, and
-// opens Receive from Home in the same popup.
-
-const { HDNodeWallet, Mnemonic, Wallet } = require("ethers");
-
-const { bootPopup, cleanupPopup } = require("./support/popupBoot");
-
-const PHRASE =
-    "abandon abandon abandon abandon abandon abandon " +
-    "abandon abandon abandon abandon abandon about";
-const PRIVATE_KEY = "0x" + "11".repeat(32);
-// The master key of PHRASE, so its first address is the phrase's.
-const XPRV = HDNodeWallet.fromSeed(
-    Mnemonic.fromPhrase(PHRASE).computeSeed(),
-).extendedKey;
-const PASSWORD = "correct horse battery staple";
-
-const PHRASE_ADDRESS = HDNodeWallet.fromPhrase(PHRASE).address;
-
-const TABS = [
-    {
-        tab: "tab-mnemonic",
-        field: "wallet-mnemonic",
-        secret: PHRASE,
-        address: PHRASE_ADDRESS,
-    },
-    {
-        tab: "tab-privkey",
-        field: "import-private-key",
-        secret: PRIVATE_KEY,
-        address: new Wallet(PRIVATE_KEY).address,
-    },
-    {
-        tab: "tab-xprv",
-        field: "import-xprv-key",
-        secret: XPRV,
-        address: PHRASE_ADDRESS,
-    },
-];
-
-afterEach(() => {
-    cleanupPopup();
-});
-
-describe("the first wallet's first address is active right away", () => {
-    test.each(TABS)(
-        "added from $tab, Receive opens on it",
-        async ({ tab, field, secret, address }) => {
-            const page = await bootPopup(undefined);
-            expect(page.pageErrors).toEqual([]);
-            await page.click("btn-welcome-add");
-            await page.click(tab);
-            page.node(field).value = secret;
-            page.node("add-wallet-password").value = PASSWORD;
-            page.node("add-wallet-password-confirm").value = PASSWORD;
-            await page.click("btn-add-wallet-confirm");
-            expect(page.visibleViews()).toEqual(["main"]);
-
-            await page.click("btn-main-receive");
-            expect(page.visibleViews()).toEqual(["receive"]);
-            expect(page.node("receive-address-block").dataset.full).toBe(
-                address,
-            );
-        },
-    );
-});

tests/support/popupBoot.js

@@ -258,17 +258,12 @@ async function bootPopup(stored, options) {
         formatAddressTotal: () => "",
         getAddressValue: () => ({ usd: null, partial: false }),
     }));
-    // scanForAddresses() answers in the real one's shape, a scan that found
-    // no used address: AddWallet reads `addresses` from it.
     jest.doMock("../../src/shared/balances", () => ({
         fetchTokenBalances: jest.fn(async () => []),
         refreshBalances: jest.fn(async () => {}),
         lookupTokenInfo: jest.fn(async () => null),
         getProvider: () => ({}),
-        scanForAddresses: jest.fn(async () => ({
-            addresses: [],
-            nextIndex: 1,
-        })),
+        scanForAddresses: jest.fn(async () => []),
     }));
     // filterTransactions() answers in the real one's shape: Home,
     // AddressDetail and AddressToken read both fields, and a bare list makes