docs: README end-to-end limits match what the browser suites do (closes #293)

The window.close override the issue named was removed with #275, so it
needs no entry. Every other place either suite changes or works around
the shipped extension is now listed: the popup loaded in a tab, Chrome's
wait before each site-connection request, its recording wrapper and click
listener, its clipboard grant, two layout tests that write into the page,
the forced leave during a decrypt, and Firefox's setting that forces the
site-connection prompt into a window. Firefox's tolerated error is
described as the leftover it is, with #487 to remove it; the phishing
blocklist is no longer listed as a failing fetch, and two stale figures
are corrected.

Model: opus-5-5

README.md

@@ -634,11 +634,12 @@ Three limits are worth knowing, all real differences from the Chrome suite:
   and silently evicts the oldest, so more than 250 console messages between two
   drains destroys the excess unread. 400 throws inside one step are reported as
   exactly the newest 250, three runs running. That buffer is shared with
-  Firefox's own console noise; a clean run of the suite's first three steps,
+  Firefox's own console noise; a clean run, measured when the suite had three
-  measured before the rest were added, peaked at 4 of 250 at the install drain
+  steps (popup load, wallet creation and Add Token), peaked at 4 of 250 at the
-  and 0 at every later drain, but a step that logs heavily could evict unread
+  install drain and 0 at every later drain, but a step that logs heavily could
-  errors. What poll-based costs is location, not coverage: an error cannot be
+  evict unread errors. What poll-based costs is location, not coverage: an error
-  placed within a step the way the Chrome suite's `pageerror` events place it.
+  cannot be placed within a step the way the Chrome suite's `pageerror` events
+  place it.
 - **Almost nothing is stubbed, which inverts the coverage of network-dependent
   code.** The container still runs with `--network none`, so the run is offline
   and no request can escape. The one thing it can reach is the loopback fixture
@@ -1313,11 +1314,14 @@ behind a "···" menu.
 
 Navigation uses a stack model (like iOS): each forward action pushes the current
 screen onto `state.viewStack`, and "Back" pops it (`pushCurrentView()` and
-`goBack()` in `src/popup/views/helpers.js`). The root screen is either Welcome
+`goBack()` in `src/popup/views/helpers.js`). "Back" skips an entry for the
-(no wallets) or Home (has wallets). Each screen below gives its view id in
+screen already showing: ShowRecoveryPhrase and the two delete screens take
-parentheses; the registry of view ids is the `VIEWS` array in
+themselves off the stack when left, so the Settings gear on one of them leaves
-`src/popup/views/helpers.js`, and the markup for a screen is the element with id
+Settings under Settings, and "Back" from there goes to the screen before
-`view-` plus that view id in `src/popup/index.html`.
+Settings. The root screen is either Welcome (no wallets) or Home (has wallets).
+Each screen below gives its view id in parentheses; the registry of view ids is
+the `VIEWS` array in `src/popup/views/helpers.js`, and the markup for a screen
+is the element with id `view-` plus that view id in `src/popup/index.html`.
 
 Three elements sit outside the screens and are present on all of them: the title
 bar ("AutistMask by @sneak" plus the Settings gear), the flash message line

TODO.md

@@ -59,6 +59,15 @@ but the review is broader than any of them.
   [#487](https://git.eeqj.de/sneak/AutistMask/issues/487)), the phishing
   blocklist the extension no longer fetches, and two stale figures.
 
+- 2026-10-07: Back from Settings no longer shows Settings again after the
+  settings gear was pressed on the recovery phrase or a delete wallet screen
+  opened from Settings, with or without a reopen in between
+  ([#481](https://git.eeqj.de/sneak/AutistMask/issues/481)). Those screens take
+  themselves off the Back stack when left, which leaves Settings under Settings;
+  `goBack()` now skips an entry for the screen already showing.
+  `tests/showPhrase.test.js`, `tests/deleteWalletLostPassword.test.js` and
+  `tests/backNavigation.test.js` drive each path.
+
 - 2026-10-07: `script/discard-dist-on-failure` returns the failed step's own
   exit status even when it cannot write its message, to a closed stderr or to a
   pipe nobody reads any more

src/popup/views/helpers.js

@@ -216,10 +216,21 @@ function pushCurrentView() {
 
 // Pop the navigation stack and show the previous view.  If the stack
 // is empty, fall back to the main (home) view.
+//
+// An entry for the view already showing is skipped: landing on it would
+// make Back seem to do nothing. Settings, the recovery phrase or delete
+// wallet screen, then the gear leaves Settings under Settings, because that
+// screen takes itself off the stack when left, and a reopened popup cuts it
+// off the restored stack the same way
+// (https://git.eeqj.de/sneak/AutistMask/issues/481).
 function goBack() {
+    const stack = state.viewStack;
+    while (stack.length > 0 && stack[stack.length - 1] === state.currentView) {
+        stack.pop();
+    }
     let target;
-    if (state.viewStack.length > 0) {
+    if (stack.length > 0) {
-        target = state.viewStack.pop();
+        target = stack.pop();
     } else {
         target = "main";
     }

tests/backNavigation.test.js

@@ -52,6 +52,7 @@ const {
     resetRenderedViews,
 } = require("../src/popup/viewRouter");
 const { state } = require("../src/shared/state");
+const { restorableStack } = require("../src/shared/persistedState");
 
 const ADDRESS = "0x1111111111111111111111111111111111111111";
 const TOKEN = "0xa0b86991c6218b36c1d19d4a2e9eb0ce3606eb48";
@@ -209,6 +210,23 @@ describe("Back onto a view the reopened popup never rendered", () => {
     });
 });
 
+// https://git.eeqj.de/sneak/AutistMask/issues/481. Settings, the recovery
+// phrase or delete wallet screen, the gear, then a reopen: the restored stack
+// is cut at the screen the gear left, which leaves Settings under the Settings
+// the popup reopens onto.
+describe("Back from Settings reopened over its own entry", () => {
+    test.each(["show-phrase", "delete-wallet-confirm"])(
+        "goes to the screen under it after leaving %s",
+        (left) => {
+            const stored = ["main", "settings", left];
+            reopenedOn("settings", restorableStack(stored, "settings"));
+            goBack();
+            expect(calls).toEqual(["main"]);
+            expect(state.currentView).toBe("main");
+        },
+    );
+});
+
 // The guards are restoreView()'s, so a popped view whose backing data is
 // gone lands on Home rather than on an empty template.
 describe("Back onto a view whose backing data is gone", () => {

tests/deleteWalletLostPassword.test.js

@@ -618,9 +618,11 @@ describe("the password route's confirm button", () => {
 
 // https://git.eeqj.de/sneak/AutistMask/issues/480: leaving either delete
 // screen drops its wallet selection, so Back onto one showed a screen whose
-// button could only answer "No wallet selected for deletion."
+// button could only answer "No wallet selected for deletion." Taking the
+// screen off the stack leaves Settings under Settings, and Back must not land
+// there either (https://git.eeqj.de/sneak/AutistMask/issues/481).
 describe("Back from Settings after leaving by the settings gear", () => {
-    test("does not land on the delete screen", () => {
+    test("goes past the delete screen to the screen under Settings", () => {
         const { helpers, deleteWallet, state } = load();
         deleteWallet.show(1);
         // The settings gear: push the current view, then show Settings.
@@ -629,10 +631,10 @@ describe("Back from Settings after leaving by the settings gear", () => {
 
         expect(state.viewStack).toEqual(["main", "settings"]);
         helpers.goBack();
-        expect(state.currentView).not.toBe("delete-wallet-confirm");
+        expect(state.currentView).toBe("main");
     });
 
-    test("does not land on the lost-password screen", async () => {
+    test("goes past the lost-password screen to the screen under Settings", async () => {
         const { helpers, deleteWallet, state } = load();
         await openLostPassword(deleteWallet, 1);
         // The settings gear: push the current view, then show Settings.
@@ -641,7 +643,7 @@ describe("Back from Settings after leaving by the settings gear", () => {
 
         expect(state.viewStack).toEqual(["main", "settings"]);
         helpers.goBack();
-        expect(state.currentView).not.toBe(VIEW);
+        expect(state.currentView).toBe("main");
     });
 
     // The lost-password screen's own Back is "Back returns to the delete

tests/showPhrase.test.js

@@ -131,8 +131,10 @@ describe("Back from Settings after leaving by the settings gear", () => {
 
     // https://git.eeqj.de/sneak/AutistMask/issues/461: leaving drops the
     // wallet selection, so Back onto this screen showed a password prompt
-    // that could only answer "No wallet is selected."
+    // that could only answer "No wallet is selected." Taking the screen off
-    test("does not land on the recovery phrase screen", () => {
+    // the stack leaves Settings under Settings, and Back must not land there
+    // either (https://git.eeqj.de/sneak/AutistMask/issues/481).
+    test("goes to the screen under Settings", () => {
         const { helpers, state, showPhrase } = load();
 
         // Opened from the wallet list in Settings, then left by the gear:
@@ -143,7 +145,21 @@ describe("Back from Settings after leaving by the settings gear", () => {
 
         expect(state.viewStack).toEqual(["main", "settings"]);
         helpers.goBack();
-        expect(state.currentView).not.toBe(SHOW_PHRASE_VIEW);
+        expect(state.currentView).toBe("main");
+    });
+
+    // Each round trip leaves one more Settings under Settings.
+    test("goes to the screen under Settings after two round trips", () => {
+        const { helpers, state, showPhrase } = load();
+        for (let i = 0; i < 2; i++) {
+            showPhrase.show(0);
+            helpers.pushCurrentView();
+            helpers.showView("settings");
+        }
+
+        expect(state.viewStack).toEqual(["main", "settings", "settings"]);
+        helpers.goBack();
+        expect(state.currentView).toBe("main");
     });
 
     // This Back takes Settings off the stack before the screen is left, so