fix: Home's Send and Receive clear the selected token (closes #753)

Three routes reach Home with a token still selected. Send used that token
whatever its dropdown showed, and Receive warned about it. Both now clear it
when they open, and Send's dropdown starts on ETH.

Model: opus-5-5

.gitea/workflows/e2e.yml

@@ -19,13 +19,10 @@ on: [push]
 # by the host daemon and mounts an empty directory, and the runner image's
 # node is too old to install this repo's dependencies.
 #
-# These jobs REPORT, they do not gate. Whether a check blocks a merge is
-# Gitea branch protection, which this repo does not configure, so a failure
-# here is a red mark a reviewer has to account for rather than a hard
-# block. Making e2e-chrome a required check is blocked while reports of the
-# Chrome suite failing under load are still open; the "In CI" section of
-# README.md names them. A gate that fails at random teaches people to merge
-# past red.
+# These jobs REPORT, they do not gate. No branch requires these two jobs, so
+# a failure is a red mark a reviewer has to account for. The Chrome suite has
+# failed under load before, and no such report is open. A gate that fails at
+# random teaches people to merge past red.
 #
 # Nothing here may pass vacuously. There is no continue-on-error and no
 # `|| true`. Both scripts exit non-zero when docker is missing, when the
@@ -36,8 +33,7 @@ jobs:
     e2e-chrome:
         runs-on: ubuntu-latest
         # Bounds the image build, a cold cache included, and the three Chrome
-        # programs, so a hung browser frees the shared runner. README.md
-        # "In CI" has the measured times.
+        # programs, so a hung browser frees the shared runner.
         timeout-minutes: 40
         steps:
             # actions/checkout v4.2.2, 2026-02-22
@@ -47,8 +43,7 @@ jobs:
     e2e-firefox:
         runs-on: ubuntu-latest
         # Bounds the image build, a cold cache included, and both Firefox
-        # programs, so a hung browser frees the shared runner. README.md
-        # "In CI" has the measured times.
+        # programs, so a hung browser frees the shared runner.
         timeout-minutes: 15
         steps:
             # actions/checkout v4.2.2, 2026-02-22

README.md

@@ -471,7 +471,9 @@ When "Back" returns to a screen that this page load has not drawn yet,
 Home is shown instead. "Back" onto a screen already drawn only unhides it, so
 unsaved input in Settings survives. Home is drawn again on every "Back". When a
 balance refresh returns while AddressDetail or AddressToken is showing, that
-screen draws its balances again.
+screen draws its balances again. When a refresh returns while Send is showing,
+Send draws its From address and current balance again. Its inputs and dropdown
+stay as the user left them.
 
 A network switch, or a change to "Use Blockscout", cuts the stack at the first
 screen that cannot be drawn from saved state. The cut also drops AddressToken
@@ -579,8 +581,9 @@ Transitions:
 - "+": derives the next address in place.
 - `[info]`: AddressDetail.
 - `[x]`: DeleteAddress.
-- "Send": Send. Refused with a flash message when the active address has a zero
-  ETH balance or belongs to a wallet carrying the `walletDefects.js` notice.
+- "Send": Send, with its dropdown on ETH. Refused with a flash message when the
+  active address has a zero ETH balance or belongs to a wallet carrying the
+  `walletDefects.js` notice.
 - "Receive": Receive.
 - Tap a transaction row: TransactionDetail.
 - "Add additional wallet...": AddWallet.
@@ -1238,8 +1241,9 @@ is `null`:
 - Home's ETH balance reads `unknown (ETH)` on mainnet and `unknown (SepoliaETH)`
   on Sepolia;
 - with ETH selected, Send reads `Current balance: unknown (ETH)` on mainnet and
-  `Current balance: unknown (SepoliaETH)` on Sepolia, and "Max" fills in nothing
-  and shows the flash message "This token's balance is unknown.";
+  `Current balance: unknown (SepoliaETH)` on Sepolia;
+- with ETH selected, "Max" fills in nothing and shows the flash message "This
+  token's balance is unknown.";
 - "Send" is not refused for a zero balance;
 - the address has no total;
 - DeleteAddress shows its warning.
@@ -1411,15 +1415,19 @@ when both tokens are known. The lines are:
   the sender that the `Amount` line does not include. The same three lines show
   what a `PERMIT2_TRANSFER_FROM` moves and where. A `WRAP_ETH` can pay its WETH
   to a recipient other than the router. When its amount gets these lines, its
-  `Moved to` line names that recipient, or reads `The sender`. A `WRAP_ETH`
-  after the step that sets `Token In` takes the amount it states from the
-  sender. When it pays anyone but the router, that amount gets these lines. When
-  it pays the router, that amount joins the `Amount` line if `Token In` is ETH,
-  and gets these lines if not. A later `WRAP_ETH` of `CONTRACT_BALANCE` states
-  no amount, so it gets no lines. ETH that the sender pays a V4 step or a
-  `WRAP_ETH` of a stated amount can get these three lines when the router may
-  hold ETH from an earlier step. When the decoder knows the amount, its
-  `Moved from the sender` line reads `Up to` and the amount.
+  `Moved to` line names that recipient, or reads `The sender`. For a `WRAP_ETH`
+  into the router, `Moved to` reads `The router`. A `WRAP_ETH` after the step
+  that sets `Token In` takes the amount it states from the sender. When it pays
+  anyone but the router, that amount gets these lines. When it pays the router,
+  that amount joins the `Amount` line if `Token In` is ETH, and gets these lines
+  if not. A later `WRAP_ETH` of `CONTRACT_BALANCE` to anyone but the router gets
+  these lines. It gets none after an `UNWRAP_WETH` into the router, or while the
+  router holds ETH from a V4 step. When it gets them, its
+  `Moved from the sender` line reads `All the ETH the transaction carries`. ETH
+  that the sender pays a V4 step or a `WRAP_ETH` of a stated amount can get
+  these three lines when the router may hold ETH from an earlier step. When the
+  decoder knows the amount, its `Moved from the sender` line reads `Up to` and
+  the amount.
 - `Permit2 allowance`, `Allowance token` and `Allowance spender`: each allowance
   that a `PERMIT2_PERMIT` or `PERMIT2_PERMIT_BATCH` grants, unless the permit's
   amount already stands as the `Amount` figure.

docs/README.md

@@ -212,15 +212,18 @@ allowed or denied for it.
 
 Getting the address back is not easy. "+" computes only addresses that this
 wallet has never listed. The removed address was listed once, so "+" skips it.
-The way back is to delete the whole wallet and import its backup again. After
-the import, the scan lists the address again when it holds ETH or has sent a
-transaction. The scan misses such an address in two cases:
+The way back is to delete the whole wallet and import its backup again. The
+import lists the wallet's first address, then scans for used addresses. An
+address is used when it holds ETH or has sent a transaction. A read that fails
+during the scan counts the address as unused. The scan stops after five unused
+addresses in a row. When the scan finds two or more used addresses, the wallet
+lists those instead. The wallet does not list the removed address when:
 
-- the address lies past five unused addresses in a row;
-- the address is the only used one the scan finds.
+- the scan finds two or more used addresses, and the address is not among them;
+- the scan finds fewer than two, and the address is not the first.
 
-When the scan does not list the address, "+" may reach it again, because the new
-wallet has never listed it.
+When the wallet does not list the address, "+" may reach it again, because the
+new wallet has never listed it.
 
 ### Deleting a wallet
 
@@ -626,11 +629,10 @@ threshold starts at 100,000 gwei, which is 0.0001 ETH. A threshold of 0 hides
 nothing.
 
 Known scam addresses. The wallet ships a list of addresses known for fraud,
-including phishing addresses and wallet drainers. A wallet drainer is a contract
-that empties a wallet once given permission. Sending to a listed address raises
-a warning on the confirmation screen, and a listed address cannot be tracked as
-a token. The list holds only addresses involved in fraud; it is not a sanctions
-list.
+including phishing addresses and wallet drainers. Sending to a listed address
+raises a warning on the confirmation screen, and a listed address cannot be
+tracked as a token. The list holds only addresses involved in fraud; it is not a
+sanctions list.
 
 Addresses and hashes are shown in full, because address poisoning relies on
 shortened ones. The only shortened address is the label of a token with no known

script/lib/package.js

@@ -1,7 +1,7 @@
 // Turn a verified dist/ into the two distributable archives.
 //
 // Invoked by script/package, which runs `make build` first so that dist/ has
-// already been checked against the build's own receipt (see the Build Receipts
+// already been checked against the build's own receipt (see the Builds
 // section of README.md). This program does not build anything and does not
 // write into dist/: it reads the emitted tree and writes release/.
 //

script/test-e2e-firefox

@@ -60,12 +60,12 @@ main() {
 
     echo "Running the Firefox e2e suite..."
     # --shm-size=1g: Firefox needs more than the default 64MB /dev/shm.
-    # --network none: the suite stubs nothing, so this is what keeps the
-    #   run offline and deterministic. The extension swallows its own
-    #   fetch failures, so the popup flows work unchanged; see the
-    #   network note in README.md. Weaker than the Chrome suite's
-    #   fixture interception, and honestly so — it proves no request
-    #   escaped, but it cannot report which ones were attempted.
+    # --network none: the container has no network, and the suite reaches
+    #   only the test page and stub node on loopback (README.md, Browser
+    #   tests). The extension swallows its own fetch failures, so the popup
+    #   flows work unchanged. Weaker than the Chrome suite's fixture
+    #   interception, and honestly so — it proves no request escaped, but it
+    #   cannot report which ones were attempted.
     # HOME=/tmp: the image's root home is not a reliable place for the
     #   browser profile.
     #

src/background/state.js

@@ -18,11 +18,11 @@
 //   updateState(fn)   read fresh, apply fn to that fresh record, write it
 //                     back — all holding the lock every write of the stored
 //                     record takes, so no other write lands in between, by
-//                     the background or by any page (README, "Stored state
-//                     and its version"). The read is one storage round trip
-//                     ahead of the write rather than a page lifetime ahead of
-//                     it (which is what made the popup's saveState() need a
-//                     per-field merge against a baseline at all).
+//                     the background or by any page (README, "Stored data").
+//                     The read is one storage round trip ahead of the write
+//                     rather than a page lifetime ahead of it (which is what
+//                     made the popup's saveState() need a per-field merge
+//                     against a baseline at all).
 //
 // A handler that must both read and write therefore does its network work
 // against a snapshot it owns, and applies the RESULT inside updateState().
@@ -72,7 +72,7 @@ async function updateStateOnce(mutate) {
 // src/shared/browserApi.js) is held from the read to the write: two
 // background turns, or a turn and a page's save, never interleave
 // (https://git.eeqj.de/sneak/AutistMask/issues/641). Every page's save waits
-// while it is held (README, "Stored state and its version").
+// while it is held (README, "Stored data").
 //
 // `mutate` must also not call updateState() itself, directly or through
 // anything it awaits: the inner turn waits for the lock the outer one holds,

src/popup/index.js

@@ -107,8 +107,10 @@ let refreshTimer = null;
 // tracked token list stays as it is.
 //
 // Once the save is done, the wallet list is drawn again. So are the balances
-// on AddressDetail or AddressToken when that screen is up. No other screen is
-// drawn again, DeleteAddress and its balance lines included.
+// on AddressDetail or AddressToken when that screen is up. When Send is up, its
+// From address and current balance are drawn again, and its inputs and dropdown
+// stay as the user left them. No other screen is drawn again, DeleteAddress and
+// its balance lines included.
 async function doRefreshAndRender() {
     if (refreshInFlight) {
         refreshAgain = true;
@@ -164,6 +166,7 @@ async function doRefreshAndRender() {
         renderWalletList();
         if (state.currentView === "address") addressDetail.renderBalances();
         if (state.currentView === "address-token") addressToken.renderBalance();
+        if (state.currentView === "send") send.updateSendBalance();
     } catch (e) {
         // No caller waits for this function, so it must never reject. An
         // unhandled rejection reports nothing. The save inside it reports its

src/popup/views/addressToken.js

@@ -360,6 +360,11 @@ function init(_ctx) {
     });
 
     $("btn-address-token-back").addEventListener("click", () => {
+        // AddressDetail's show() clears the token, but Back onto a drawn
+        // screen only unhides it. "Send" below may have left the dropdown on
+        // the token as well.
+        state.selectedToken = null;
+        $("send-token").value = "ETH";
         goBack();
     });
 

src/popup/views/approval.js

@@ -319,12 +319,12 @@ function showTxApproval(details) {
             );
         }
         // A swap the decoder read no amount for, such as one whose V4 swap
-        // action could not be read or a V4 exact-out swap. The wait and error
-        // screens say the amount could not be decoded, with no currency after
-        // it, rather than show the transaction's ETH value as the amount. A
-        // swap paid in native ETH keeps that value: it is the ETH the swap
-        // pays (for an exact-out swap, the most it pays), not a figure that
-        // had to be read from the calldata.
+        // action could not be read or a V4 exact-out swap. The wait, success
+        // and error screens say the amount could not be decoded, with no
+        // currency after it, rather than show the transaction's ETH value as
+        // the amount. A swap paid in native ETH keeps that value: it is the
+        // ETH the swap pays (for an exact-out swap, the most it pays), not a
+        // figure that had to be read from the calldata.
         const tokenIn = decoded.details.find((d) => d.label === "Token In");
         if (
             tokenIn &&

src/popup/views/deleteAddress.js

@@ -83,10 +83,11 @@ function recoveryPathText(wallet) {
 // rounded number would report "0.0000 ETH" for an address holding real money.
 // The lines below it carry the amounts, in the same format as Home and
 // AddressDetail, followed by the USD total when there is one to give — no
-// total line at all on testnet or before the first price fetch, and no figure
-// when every holding here is one with no price, since "$0.00" directly under
-// "This address holds a balance." is a contradiction. A token holding below
-// 0.000001 does not count, as the lines below leave it out.
+// total line at all on testnet, before the first price fetch or while no
+// refresh has read the ETH balance, and no figure when every holding here is
+// one with no price, since "$0.00" directly under "This address holds a
+// balance." is a contradiction. A token holding below 0.000001 does not count,
+// as the lines below leave it out.
 //
 // While no refresh has read the ETH balance the address may be empty, so the
 // sentence says "may hold".

src/popup/views/helpers.js

@@ -272,7 +272,7 @@ function clearFlash() {
 }
 
 // The flash line reserves exactly one line, and a message that wrapped would
-// push the screen below it down (README, No Layout Shift). So #flash-msg never
+// push the screen below it down (README, Appearance). So #flash-msg never
 // wraps: text too long for the line is cut with an ellipsis, and the whole
 // message is also put in the line's title. Write messages to fit, at most 50
 // characters, so none is cut.
@@ -528,9 +528,9 @@ const ADDRESS_MIN_DISPLAY_LEN = 32;
 
 // Truncate the middle of a string, replacing removed characters with "…".
 // Safety: refuses to truncate more than 10 characters, which is the maximum
-// that still prevents address spoofing attacks (see Display Consistency in
-// README).  Callers that need to display less should use a different UI
-// approach rather than silently making addresses insecure.
+// that still prevents address spoofing attacks (see Addresses in README).
+// Callers that need to display less should use a different UI approach rather
+// than silently making addresses insecure.
 function truncateMiddle(str, maxLen) {
     if (str.length <= maxLen) return str;
     const removed = str.length - maxLen + 1; // +1 for the ellipsis char
@@ -633,9 +633,9 @@ function formatAddressHtml(address, ensName, maxLen, title) {
     return renderAddressHtml(address, { title, ensName, maxLen });
 }
 
-// A transaction's time as every screen shows it (README, Display
-// Consistency): the ISO datetime, in UTC when the UTC Timestamps setting is
-// on, and the relative age. Views import these two; they keep no copies.
+// A transaction's time as every screen shows it (README, Amounts): the ISO
+// datetime, in UTC when the UTC Timestamps setting is on, and the relative age.
+// Views import these two; they keep no copies.
 function isoDate(timestamp) {
     const d = new Date(timestamp * 1000);
     const pad = (n) => String(n).padStart(2, "0");

src/popup/views/home.js

@@ -510,11 +510,15 @@ function init(ctx) {
             showFlash("Cannot send \u2014 zero balance.");
             return;
         }
+        // Send uses a selected token ahead of its dropdown, and AddressToken
+        // can leave one selected on the way here.
+        state.selectedToken = null;
         $("send-to").value = "";
         $("send-amount").value = "";
         $("send-token-dropdown").classList.remove("hidden");
         $("send-token-static").classList.add("hidden");
         renderSendTokenSelect(addr);
+        $("send-token").value = "ETH";
         updateSendBalance();
         resetSendValidation();
         pushCurrentView();
@@ -526,6 +530,9 @@ function init(ctx) {
             showFlash("No active address selected.");
             return;
         }
+        // Receive warns about a selected token, and AddressToken can leave one
+        // selected on the way here.
+        state.selectedToken = null;
         ctx.showReceive();
     });
 }

src/popup/views/settings.js

@@ -265,7 +265,7 @@ async function renderSiteLists() {
 // A network switch, made by the user here or saved by the background once the
 // user approved a site's request (src/popup/index.js), leaves every screen on
 // the page showing the previous network. Two functions leave the page as
-// README's Screen Map describes:
+// README's Navigation section describes:
 //
 // - cutViewStack(), before the switch is saved, so that save keeps the cut for
 //   a popup closed straight after

src/shared/amountDisplay.js

@@ -1,4 +1,4 @@
-// The 4-decimal amount rule from README.md's Display Consistency section, and
+// The 4-decimal amount rule from README.md's Amounts section, and
 // the one exception to it, in one place. Three call sites had grown their own
 // copy of the truncation — the history and balance lists
 // (`src/shared/transactions.js`), the approval screen's ERC-20 amount line

src/shared/browserApi.js

@@ -240,10 +240,9 @@ function onStorageChanged(listener) {
 /**
  * Run `fn` while holding the browser's lock called `name`
  * (`navigator.locks`), and settle as `fn` settles. Every page of the extension
- * and its background share these locks, except a page in a Firefox private
- * window (README, "Stored state and its version"), so while one of them holds
- * `name` another asking for it waits, in the order they asked. The lock is let
- * go when `fn` settles, whether it resolved or rejected.
+ * and its background share these locks, so while one of them holds `name`
+ * another asking for it waits, in the order they asked. The lock is let go when
+ * `fn` settles, whether it resolved or rejected.
  *
  * Every write of the stored record holds the lock named after its key,
  * "autistmask", from its read to its write: saveState() in
@@ -266,8 +265,8 @@ function withLock(name, fn) {
 
 // `storage.session`, the browser's session storage: what is kept there lasts
 // until the browser closes. It survives the background worker being stopped
-// and started again, which module-level variables do not (README, Background
-// scheduling). The background keeps the connections allowed without
+// and started again, which module-level variables do not (README, The
+// background worker). The background keeps the connections allowed without
 // "Remember" there; see src/background/index.js. Firefox has it from version
 // 115, the minimum manifest/firefox.json declares.
 //

src/shared/uniswap.js

@@ -404,6 +404,11 @@ const OPEN_DELTA = Symbol("v4-open-delta");
 // that nothing is swapped.
 const ALREADY_PAID = Symbol("v2-already-paid");
 
+// A later WRAP_ETH of CONTRACT_BALANCE wraps all the ETH the router holds, and
+// so all the ETH the transaction carries. The calldata states no quantity for
+// it. The approval screen's Value line gives that ETH.
+const TRANSACTION_ETH = Symbol("transaction-eth");
+
 // The router's whole-balance amount, universal-router
 // `ActionConstants.CONTRACT_BALANCE`: a V2 exact-in given it as `amountIn`
 // pays the pair all the router holds of the input token.
@@ -416,6 +421,7 @@ const CONTRACT_BALANCE = 2n ** 255n;
 const OPEN_DELTA_AMOUNT = "All available (V4 open delta)";
 const ALREADY_PAID_AMOUNT =
     "Whatever an earlier step sent to the pair (V2 already paid)";
+const TRANSACTION_ETH_AMOUNT = "All the ETH the transaction carries";
 const NO_MINIMUM = "None (no minimum guaranteed)";
 
 // Permit2 amounts are uint160; the maximum is Permit2's "unbounded".
@@ -1267,9 +1273,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // ERC-20 token from the router takes none of that token from the
         // sender.
         let inputPaidByUser = false;
-        // The recipient of a WRAP_ETH that set the input side, as written,
-        // when it is not the router; otherwise null. That WRAP_ETH pays its
-        // WETH there, not to a swap step (see the Moved to lines).
+        // The recipient of a WRAP_ETH that set the input side, as written;
+        // otherwise null. That WRAP_ETH pays its WETH there (see the Moved to
+        // lines).
         let wrapEthRecipient = null;
         // The last PERMIT2_PERMIT this decoder read before a step set the
         // input side, or null (see permitStands after the loop).
@@ -1289,6 +1295,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let minOutput = null;
         let outputEstablished = false;
         let hasUnwrapWeth = false;
+        // Set once an UNWRAP_WETH pays ETH to the router, which a later
+        // WRAP_ETH of CONTRACT_BALANCE then wraps.
+        let unwrappedIntoRouter = false;
         // Set when an UNWRAP_WETH pays out, as ETH, the output side's WETH,
         // which the router holds; cleared whenever the output side is set
         // again, or a later step may pay that ETH out as WETH (see after the
@@ -1368,9 +1377,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // After the loop each joins the Amount line or gets lines of its own
         // (see permitStands). A take with `atMost` set may take less than
         // `amount`: it never joins the Amount line, and its line reads
-        // "Up to" and the amount. A take with a `recipient`, the ETH of a
-        // later WRAP_ETH that pays anyone but the router, never joins the
-        // Amount line either: its Moved to line names that recipient.
+        // "Up to" and the amount. A take with a `recipient` is the ETH of a
+        // later WRAP_ETH. If that recipient is not the router, the take never
+        // joins the Amount line either: its Moved to line names that recipient.
         const userPaid = [];
         // A swap step the user pays for (`payerIsUser` true) takes `amount`
         // of `token` from the sender, or at most that when `atMost` is set. A
@@ -1906,9 +1915,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                                 w.amount,
                             );
                             inputPaidByUser = true;
-                            if (!isRouter(w.recipient)) {
                             wrapEthRecipient = w.recipient;
-                            }
                         } else if (
                             w.amount > 0n &&
                             w.amount !== CONTRACT_BALANCE
@@ -1916,17 +1923,33 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                             // The ETH of a stated amount comes from the
                             // transaction's value. ETH an earlier step left in
                             // the router may pay part of it, and the sender
-                            // then pays at most that amount. CONTRACT_BALANCE
-                            // states no amount to take.
+                            // then pays at most that amount.
                             userPaid.push({
                                 token: "0x0000000000000000000000000000000000000000",
                                 amount: w.amount,
                                 atMost: heldByRouter.has(
                                     "0x0000000000000000000000000000000000000000",
                                 ),
-                                recipient: isRouter(w.recipient)
-                                    ? null
-                                    : w.recipient,
+                                recipient: w.recipient,
+                            });
+                        } else if (
+                            w.amount === CONTRACT_BALANCE &&
+                            !isRouter(w.recipient) &&
+                            !unwrappedIntoRouter &&
+                            !heldByRouter.has(
+                                "0x0000000000000000000000000000000000000000",
+                            )
+                        ) {
+                            // It pays the recipient all the ETH the transaction
+                            // carries. It gets no lines after an UNWRAP_WETH
+                            // into the router, or while the router holds ETH
+                            // from a V4 step: Uniswap's routes pay back what
+                            // their swap did not spend this way, and carry no
+                            // ETH.
+                            userPaid.push({
+                                token: "0x0000000000000000000000000000000000000000",
+                                amount: TRANSACTION_ETH,
+                                recipient: w.recipient,
                             });
                         }
                         addPayee(w.recipient);
@@ -2169,6 +2192,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                             heldByRouter.has(w),
                         );
                         WETH_ADDRESSES.forEach((w) => heldByRouter.delete(w));
+                        if (isRouter(u.recipient)) {
+                            unwrappedIntoRouter = true;
+                        }
                         if (isRouter(u.recipient) && heldWeth) {
                             heldByRouter.set(
                                 "0x0000000000000000000000000000000000000000",
@@ -2266,8 +2292,8 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // What the steps take that the Amount line does not give, as
         // { token, amount, atMost, recipient }. A null token is a step this
         // decoder did not read (see spentUnread()), or a token it does not
-        // know. `atMost` is as in `userPaid`. Only the take of a WRAP_ETH that
-        // pays elsewhere has a recipient (see wrapEthRecipient and userPaid).
+        // know. `atMost` is as in `userPaid`. Only the take of a WRAP_ETH has
+        // a recipient (see wrapEthRecipient and userPaid).
         const spentFromSender = [];
         let total = null;
         // The takes from the sender that `total` adds up, each a quantity, in
@@ -2315,7 +2341,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 typeof total === "bigint" &&
                 typeof t.amount === "bigint" &&
                 !t.atMost &&
-                !present(t.recipient)
+                (!present(t.recipient) || isRouter(t.recipient))
             ) {
                 total += t.amount;
                 inTotal.push(t);
@@ -2413,13 +2439,14 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         }
 
         // The text of an amount the swap steps spend, for the Amount line and
-        // the lines for other tokens below it. Three amounts need no scale to
-        // describe and are named rather than formatted: V4's open delta and
-        // V2's already-paid zero, neither of which is a quantity at all (see
-        // OPEN_DELTA and ALREADY_PAID), and an unbounded permit. Those two
-        // tests come first — the sentinels are not bigints and cannot be
-        // compared with one. `atMost` marks an amount that is only the most a
-        // take may be (see userPaid).
+        // the lines for other tokens below it. Four amounts need no scale to
+        // describe and are named rather than formatted: V4's open delta, V2's
+        // already-paid zero and the ETH the transaction carries, none of which
+        // is a quantity at all (see OPEN_DELTA, ALREADY_PAID and
+        // TRANSACTION_ETH), and an unbounded permit. Those three tests come
+        // first — the sentinels are not bigints and cannot be compared with
+        // one. `atMost` marks an amount that is only the most a take may be
+        // (see userPaid).
         const spentText = (amount, info, atMost) => {
             if (amount === OPEN_DELTA) {
                 return { raw: OPEN_DELTA_AMOUNT, display: OPEN_DELTA_AMOUNT };
@@ -2430,6 +2457,12 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     display: ALREADY_PAID_AMOUNT,
                 };
             }
+            if (amount === TRANSACTION_ETH) {
+                return {
+                    raw: TRANSACTION_ETH_AMOUNT,
+                    display: TRANSACTION_ETH_AMOUNT,
+                };
+            }
             if (amount >= MAX_UINT160) {
                 return { raw: "Unlimited", display: "Unlimited" };
             }
@@ -2489,8 +2522,8 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // of the lines below for a PERMIT2_TRANSFER_FROM. An amount this
         // decoder does not know is said so, and a step it did not read gets
         // that one line alone. A take with no recipient goes to the swap step
-        // that spends it. A take with a recipient goes to that recipient;
-        // `MSG_SENDER` means the sender.
+        // that spends it. A take with a recipient goes to that recipient:
+        // the router, the sender as `MSG_SENDER`, or an address.
         for (const s of spentFromSender) {
             details.push({
                 label: "Moved from the sender",
@@ -2514,6 +2547,8 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         label: "Moved to",
                         value: "The swap step that spends it",
                     });
+                } else if (isRouter(s.recipient)) {
+                    details.push({ label: "Moved to", value: "The router" });
                 } else if (s.recipient.toLowerCase() === MSG_SENDER) {
                     details.push({ label: "Moved to", value: "The sender" });
                 } else {

tests/addedTokenBalance.test.js

@@ -19,12 +19,17 @@
 // its ETH line reads the same, and Send states it as unknown
 // (https://git.eeqj.de/sneak/AutistMask/issues/736).
 //
+// A refresh that returns while Send is up draws Send's balance line again, and
+// leaves what the user entered as it is
+// (https://git.eeqj.de/sneak/AutistMask/issues/748).
+//
 // Driven through the real popup over a stored profile on Ethereum Mainnet,
 // with "Show tracked tokens with zero balance" on, as it is by default.
 
 const { HDNodeWallet, Mnemonic } = require("ethers");
 
 const {
+    ADDRESS,
     bootPopup,
     cleanupPopup,
     unversionedValidProfile,
@@ -431,6 +436,62 @@ test("Send for the new token reads its balance as unknown before any refresh has
     await finish([MILLION]);
 });
 
+test("Send for the new token reads the fetched balance once the refresh returns, without being reopened", async () => {
+    const page = await bootOnAddress();
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+    await openToken(page, NEW_TOKEN.toLowerCase());
+    await page.click("btn-address-token-send");
+    expect(page.text("send-balance")).toBe("Current balance: unknown (NEW)");
+
+    await finish([MILLION]);
+
+    expect(page.visibleViews()).toEqual(["send"]);
+    expect(page.text("send-balance")).toBe("Current balance: 1000000.0000 NEW");
+});
+
+test("a refresh that returns while Send is up draws an unread ETH balance again and leaves the inputs alone", async () => {
+    const page = await bootPopup(profileNotRead());
+    // The dropdown's first option, which a browser selects by itself.
+    page.node("send-token").value = "ETH";
+    await page.click("btn-main-send");
+    expect(page.text("send-balance")).toBe("Current balance: unknown (ETH)");
+    const recipient = "0x" + "dd".repeat(20);
+    page.node("send-to").value = recipient;
+    page.node("send-amount").value = "0.5";
+    // Stands for the options on the screen, which a refresh leaves as they are.
+    page.node("send-token").innerHTML = "options on the screen";
+    // Stands for the From address from before the refresh.
+    page.node("send-from").innerHTML = "From address before the refresh";
+
+    await refreshOnce(page, []);
+
+    expect(page.visibleViews()).toEqual(["send"]);
+    expect(page.text("send-balance")).toBe("Current balance: 2.0000 ETH");
+    expect(page.node("send-from").innerHTML).toContain(ADDRESS);
+    expect(page.value("send-to")).toBe(recipient);
+    expect(page.value("send-amount")).toBe("0.5");
+    expect(page.value("send-token")).toBe("ETH");
+    expect(page.node("send-token").innerHTML).toBe("options on the screen");
+});
+
+test("a refresh that returns while Send is up keeps the token picked in the dropdown and draws its new balance", async () => {
+    const page = await bootOnDerivingWallet();
+    const dropdown = page.node("send-token");
+    dropdown.value = "ETH";
+    await page.click("btn-main-send");
+    dropdown.value = NEW_TOKEN;
+    for (const fn of dropdown.listeners.change) await fn();
+    expect(page.text("send-balance")).toBe("Current balance: 1000000.0000 NEW");
+    page.node("send-amount").value = "0.5";
+
+    await refreshOnce(page, [{ ...MILLION, balance: "3000000.0" }]);
+
+    expect(page.text("send-balance")).toBe("Current balance: 3000000.0000 NEW");
+    expect(page.value("send-token")).toBe(NEW_TOKEN);
+    expect(page.value("send-amount")).toBe("0.5");
+});
+
 test("a token added by contract address on SettingsAddToken reads quantity unknown until the refresh returns", async () => {
     const page = await bootPopup(unversionedValidProfile());
     expect(page.visibleViews()).toEqual(["main"]);

tests/addressTokenBack.test.js

@@ -0,0 +1,165 @@
+// "Back" from AddressToken leaves no token selected. AddressDetail's show()
+// would clear it, but Back onto a drawn screen only unhides that screen, and
+// Send and Receive both read the field
+// (https://git.eeqj.de/sneak/AutistMask/issues/751). Driven through the real
+// popup over a stored profile.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+    TOKEN_ADDRESS,
+} = require("./support/popupBoot");
+
+const RECIPIENT = "0x711e691962E5c054b78071C789A0C8CE657377aD";
+const TOKEN = {
+    address: TOKEN_ADDRESS,
+    symbol: "TST",
+    decimals: 18,
+    name: "Test Token",
+};
+
+afterEach(() => {
+    cleanupPopup();
+});
+
+// The popup reopened onto AddressDetail, at an address holding 1.5 ETH and
+// 2.5 TST.
+function bootOnAddress() {
+    const profile = unversionedValidProfile({
+        currentView: "address",
+        viewStack: ["main"],
+        selectedWallet: 0,
+        selectedAddress: 0,
+        trackedTokens: [TOKEN],
+    });
+    profile.wallets[0].addresses[0].tokenBalances = [
+        { ...TOKEN, balance: "2.5" },
+    ];
+    return bootPopup(profile);
+}
+
+// AddressToken opened from AddressDetail, as tapping the token's row does.
+async function openToken(page) {
+    const { state } = require("../src/shared/state");
+    state.selectedToken = TOKEN_ADDRESS;
+    require("../src/popup/views/helpers").pushCurrentView();
+    require("../src/popup/views/addressToken").show();
+    await page.settle();
+    expect(page.visibleViews()).toEqual(["address-token"]);
+}
+
+async function backFromToken(page) {
+    await page.click("btn-address-token-back");
+    expect(page.visibleViews()).toEqual(["address"]);
+}
+
+// ETH chosen in Send's dropdown, as the user does.
+async function chooseEth(page) {
+    const dropdown = page.node("send-token");
+    dropdown.value = "ETH";
+    for (const fn of dropdown.listeners.change) await fn();
+}
+
+// Review for 1 of the token Send has, to RECIPIENT.
+async function review(page) {
+    page.node("send-to").value = RECIPIENT;
+    page.node("send-amount").value = "1";
+    await page.click("btn-send-review");
+    expect(page.visibleViews()).toEqual(["confirm-tx"]);
+}
+
+describe("after Back from AddressToken", () => {
+    test("no token is selected, on the page or in the stored record", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await backFromToken(page);
+
+        const { state } = require("../src/shared/state");
+        expect(state.selectedToken).toBeNull();
+        expect(page.storage.read("autistmask").selectedToken).toBeNull();
+    });
+
+    test("Send with ETH chosen shows the ETH balance", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await backFromToken(page);
+
+        await page.click("btn-send");
+        await chooseEth(page);
+
+        expect(page.text("send-balance")).toBe("Current balance: 1.5000 ETH");
+    });
+
+    test("Send with ETH chosen reviews ETH", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await backFromToken(page);
+
+        await page.click("btn-send");
+        await chooseEth(page);
+        await review(page);
+
+        expect(page.text("confirm-type")).toBe("Native ETH transfer");
+    });
+
+    test("Receive shows no token warning", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await backFromToken(page);
+
+        await page.click("btn-receive");
+
+        expect(page.visibleViews()).toEqual(["receive"]);
+        expect(page.text("receive-erc20-warning")).toBe("");
+    });
+
+    // AddressToken's Send sets the dropdown to the token, and nothing else
+    // rebuilds it on the way back to AddressDetail.
+    test("Send opens on ETH after AddressToken's Send has been used", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await page.click("btn-address-token-send");
+        await page.click("btn-send-back");
+        await backFromToken(page);
+
+        await page.click("btn-send");
+
+        expect(page.value("send-token")).toBe("ETH");
+        expect(page.text("send-balance")).toBe("Current balance: 1.5000 ETH");
+    });
+});
+
+describe("Send opened from AddressToken sends that token", () => {
+    async function expectSendsToken(page) {
+        await page.click("btn-address-token-send");
+        expect(page.text("send-balance")).toBe("Current balance: 2.5000 TST");
+        await review(page);
+        expect(page.text("confirm-type")).toBe("ERC-20 token transfer (TST)");
+    }
+
+    test("the first time", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+
+        await expectSendsToken(page);
+    });
+
+    test("after Back from Send", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await page.click("btn-address-token-send");
+        await page.click("btn-send-back");
+
+        await expectSendsToken(page);
+    });
+
+    test("when the token is opened again after Back from AddressToken", async () => {
+        const page = await bootOnAddress();
+        await openToken(page);
+        await backFromToken(page);
+        await openToken(page);
+
+        await expectSendsToken(page);
+    });
+});

tests/approvalDisplayFloor.test.js

@@ -1,11 +1,11 @@
 // The floor of the approval screen's amount line.
 //
 // Amounts are truncated to four decimal places for scannability (README.md,
-// Display Consistency). With the token's true scale resolved, that truncation
-// can still take a real amount below the floor and print it as `0.0000`: one
-// base unit of an 18-decimal token, or a few hundred of an 8-decimal one. On
-// the one screen whose job is to state what is being authorized, a nonzero
-// transfer or allowance then reads as nothing.
+// Amounts). With the token's true scale resolved, that truncation can still
+// take a real amount below the floor and print it as `0.0000`: one base unit of
+// an 18-decimal token, or a few hundred of an 8-decimal one. On the one screen
+// whose job is to state what is being authorized, a nonzero transfer or
+// allowance then reads as nothing.
 //
 // The invariant asserted here is narrow: a nonzero amount never renders as
 // zero. The four-decimal rule itself is unchanged, and the string the

tests/dustThreshold.test.js

@@ -74,7 +74,7 @@ describe("parsing the dust threshold", () => {
 });
 
 describe("the rejection message", () => {
-    // README, Language & Labeling: error messages are full sentences.
+    // README, Wording: error messages are full sentences.
     test("is a full sentence naming the constraint", () => {
         expect(DUST_THRESHOLD_MESSAGE).toMatch(/^[A-Z].*\.$/);
         expect(DUST_THRESHOLD_MESSAGE).toContain("whole number of gwei");
@@ -95,9 +95,9 @@ describe("the flash line the message is shown in", () => {
     // NOT and CANNOT assert that the message fits inside it: jest runs on
     // the node environment here, with no layout engine, so every rendered
     // height is zero. An earlier version of this block claimed to pin the
-    // No Layout Shift policy with this regex, and it passed at any message
-    // length, including one that wrapped to two lines and pushed the
-    // settings view down 12px.
+    // reserved space rule in README, Appearance, with this regex, and it
+    // passed at any message length, including one that wrapped to two lines
+    // and pushed the settings view down 12px.
     //
     // The line cuts a message too long for it with an ellipsis (see
     // showFlash() in src/popup/views/helpers.js). The assertions that

tests/e2e/run.js

@@ -1280,7 +1280,7 @@ test("the correct password reveals the full phrase, and nothing logs it (#161)",
         );
         assert(!promptShown, "the password prompt is still shown after unlock");
 
-        // Full Identifiers Policy: shown whole, and copyable.
+        // README, ShowRecoveryPhrase: shown whole, and copyable.
         const title = await env.page.getAttribute(
             "#show-phrase-value",
             "title",
@@ -2255,7 +2255,7 @@ async function waitForFilledFlashLine(page) {
     }
 }
 
-// README, No Layout Shift: the rejection message goes into #flash-msg,
+// README, Appearance: the rejection message goes into #flash-msg,
 // whose min-h-[1.25rem] reserves exactly ONE line at text-xs, and which
 // cuts a message too long for that line with an ellipsis rather than wrap
 // it. This shows the real message and measures that nothing moves; the
@@ -2603,7 +2603,7 @@ function toHexWei(wei) {
 }
 
 // A fee in wei as the confirmation screen writes it: truncated to four decimal
-// places (README.md, Display Consistency). Deliberately a second
+// places (README.md, Amounts). Deliberately a second
 // implementation rather than an import of src/shared/amountDisplay.js:
 // asserting against an independent rendering is stronger than asserting a
 // function equals itself. The fixture's fees are above 0.0001 ETH, so the
@@ -3298,7 +3298,7 @@ async function goToTokenConfirm(env) {
         amount: TOKEN_AMOUNT,
     });
     await waitForEstimate(env.page);
-    // TOKEN_AMOUNT to four decimal places (README.md, Display Consistency).
+    // TOKEN_AMOUNT to four decimal places (README.md, Amounts).
     const shown = await shownAmount(env.page);
     assert(
         shown === "0.2500 " + STUB_TOKEN.symbol,
@@ -3453,7 +3453,7 @@ test("a token that lies about decimals() at signing time broadcasts nothing (#30
 
 // ------------------------- a send Sign & Send refuses moves nothing (#583)
 //
-// README, No Layout Shift. Sign & Send refuses a send on the confirmation
+// README, Appearance. Sign & Send refuses a send on the confirmation
 // screen when the active network changed since review and when its gas limit
 // or fee is over its bound, and each refusal's sentence sits in a box that held
 // its space from the first paint. This drives the total fee refusal, the longer
@@ -5770,8 +5770,8 @@ async function main() {
     // There is no fourth: once the context is closed nothing can record,
     // because the route handler and the console listeners died with it.
     // Traffic that a test defers past the trailing drain is therefore
-    // never observed at all — a real limit of this design, stated in the
-    // README, and not one any post-teardown hook could close.
+    // never observed at all — a real limit of this design, and not one
+    // any post-teardown hook could close.
     //
     // Two green-but-vacuous runs on this harness were the same shape: a
     // record falling outside somebody's window and being dropped. First

tests/homeSelectedToken.test.js

@@ -0,0 +1,185 @@
+// Home's "Send" and "Receive" open with no token selected. Three routes reach
+// Home with a token still selected, Send reads that token ahead of its dropdown,
+// and Receive warns about it
+// (https://git.eeqj.de/sneak/AutistMask/issues/753). Driven through the real
+// popup over a stored profile.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+    TOKEN_ADDRESS,
+} = require("./support/popupBoot");
+
+const RECIPIENT = "0x711e691962E5c054b78071C789A0C8CE657377aD";
+const OTHER_WALLET_ADDRESS = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
+const PRIVATE_KEY = "0x" + "11".repeat(32);
+const PASSWORD = "correct horse battery staple";
+const TOKEN = {
+    address: TOKEN_ADDRESS,
+    symbol: "TST",
+    decimals: 18,
+    name: "Test Token",
+};
+
+afterEach(() => {
+    cleanupPopup();
+});
+
+// AddressToken opened from AddressDetail, as tapping the token's row does.
+async function openToken(page) {
+    const { state } = require("../src/shared/state");
+    state.selectedToken = TOKEN_ADDRESS;
+    require("../src/popup/views/helpers").pushCurrentView();
+    require("../src/popup/views/addressToken").show();
+    await page.settle();
+    expect(page.visibleViews()).toEqual(["address-token"]);
+}
+
+// The popup open on AddressToken, at an address holding 1.5 ETH and 2.5 TST.
+// A second wallet is there for the route that deletes one.
+async function bootOnToken() {
+    const profile = unversionedValidProfile({
+        currentView: "address",
+        viewStack: ["main"],
+        selectedWallet: 0,
+        selectedAddress: 0,
+        trackedTokens: [TOKEN],
+    });
+    profile.wallets[0].addresses[0].tokenBalances = [
+        { ...TOKEN, balance: "2.5" },
+    ];
+    profile.wallets.push({
+        type: "hd",
+        name: "Wallet 2",
+        xpub: "xpub-wallet-2",
+        encryptedSecret: "encrypted-secret-2",
+        nextIndex: 1,
+        addresses: [
+            {
+                address: OTHER_WALLET_ADDRESS,
+                balance: "0",
+                tokenBalances: [],
+            },
+        ],
+    });
+    const page = await bootPopup(profile);
+    await openToken(page);
+    return page;
+}
+
+async function reopenAfterTokenSend() {
+    const closed = await bootOnToken();
+    await closed.click("btn-address-token-send");
+    cleanupPopup();
+    return bootPopup(undefined, { storage: closed.storage });
+}
+
+async function addWalletFromTokenSettings() {
+    const page = await bootOnToken();
+    await page.click("btn-settings");
+    await page.click("btn-main-add-wallet");
+    await page.click("tab-privkey");
+    page.node("import-private-key").value = PRIVATE_KEY;
+    page.node("add-wallet-password").value = PASSWORD;
+    page.node("add-wallet-password-confirm").value = PASSWORD;
+    await page.click("btn-add-wallet-confirm");
+    return page;
+}
+
+// Deletes through the lost-password screen. It asks for the wallet's name, and
+// the stored wallets here have no real password.
+async function deleteWalletFromTokenSettings() {
+    const page = await bootOnToken();
+    await page.click("btn-settings");
+    // What the second wallet's [x] button in Settings does.
+    require("../src/popup/views/helpers").pushCurrentView();
+    require("../src/popup/views/deleteWallet").show(1);
+    await page.click("btn-delete-wallet-lost-password");
+    page.node("delete-wallet-lost-name-input").value = "Wallet 2";
+    await page.click("btn-delete-wallet-lost-confirm");
+    await page.click("btn-settings-back");
+    return page;
+}
+
+const ROUTES = [
+    ["reopening the popup after AddressToken's Send", reopenAfterTokenSend],
+    [
+        "the Settings gear on AddressToken, then adding a wallet",
+        addWalletFromTokenSettings,
+    ],
+    [
+        "the Settings gear on AddressToken, then deleting another wallet, then Back",
+        deleteWalletFromTokenSettings,
+    ],
+];
+
+// A route that stopped reaching Home with the token selected would prove nothing
+// in the tests below, so it fails here.
+async function arriveOnHome(route) {
+    const page = await route();
+    const { state } = require("../src/shared/state");
+    expect(page.visibleViews()).toEqual(["main"]);
+    expect(state.selectedToken).toBe(TOKEN_ADDRESS);
+    return page;
+}
+
+// ETH chosen in Send's dropdown, as the user does.
+async function chooseEth(page) {
+    const dropdown = page.node("send-token");
+    dropdown.value = "ETH";
+    for (const fn of dropdown.listeners.change) await fn();
+}
+
+// Review for 1 of the token Send has, to RECIPIENT.
+async function review(page) {
+    page.node("send-to").value = RECIPIENT;
+    page.node("send-amount").value = "1";
+    await page.click("btn-send-review");
+    expect(page.visibleViews()).toEqual(["confirm-tx"]);
+}
+
+describe.each(ROUTES)("after %s", (_name, route) => {
+    test("choosing ETH on Home's Send reviews ETH", async () => {
+        const page = await arriveOnHome(route);
+
+        await page.click("btn-main-send");
+        await chooseEth(page);
+        await review(page);
+
+        expect(page.text("confirm-type")).toBe("Native ETH transfer");
+        expect(page.storage.read("autistmask").selectedToken).toBeNull();
+    });
+
+    test("Home's Send starts on ETH", async () => {
+        const page = await arriveOnHome(route);
+
+        await page.click("btn-main-send");
+
+        expect(page.text("send-balance")).toBe("Current balance: 1.5000 ETH");
+        expect(page.value("send-token")).toBe("ETH");
+    });
+
+    test("Home's Receive shows no token warning", async () => {
+        const page = await arriveOnHome(route);
+
+        await page.click("btn-main-receive");
+
+        expect(page.visibleViews()).toEqual(["receive"]);
+        expect(page.text("receive-erc20-warning")).toBe("");
+        expect(page.storage.read("autistmask").selectedToken).toBeNull();
+    });
+});
+
+test("AddressToken's Send still sends the token after Home's Send has opened", async () => {
+    const page = await arriveOnHome(deleteWalletFromTokenSettings);
+    await page.click("btn-main-send");
+    await page.click("btn-send-back");
+    await openToken(page);
+
+    await page.click("btn-address-token-send");
+
+    expect(page.text("send-balance")).toBe("Current balance: 2.5000 TST");
+    await review(page);
+    expect(page.text("confirm-type")).toBe("ERC-20 token transfer (TST)");
+});

tests/manifest.test.js

@@ -165,9 +165,9 @@ describe("declared icons", () => {
     });
 });
 
+// README, Installing on Firefox: the extension does not run in private windows.
 // Firefox gives a page in a private window locks of its own, so that page's
-// save could land between the background's read and its write (README,
-// "Stored state and its version").
+// save could land between the background's read and its write.
 describe("private windows", () => {
     test("a page in a firefox private window cannot read or write extension storage", () => {
         expect(readManifest("firefox").incognito).toBe("not_allowed");

tests/support/navigatorLocks.js

@@ -5,7 +5,7 @@
 // browser's own does for the one call the extension makes,
 // `navigator.locks.request(name, callback)`. Every module a test file loads
 // shares it, as the extension's background and its pages share the browser's
-// (README, "Stored state and its version").
+// (README, "Stored data").
 //
 // Run before each test file by `setupFiles` in package.json.
 

tests/timestampDisplay.test.js

@@ -1,7 +1,7 @@
 // A transaction's time is written by isoDate() and timeAgo() in
-// src/popup/views/helpers.js on every screen that shows one (README, Display
-// Consistency; https://git.eeqj.de/sneak/AutistMask/issues/168). AddressDetail
-// and AddressToken used to define their own copies, so a fix to the shared pair
+// src/popup/views/helpers.js on every screen that shows one (README, Amounts;
+// https://git.eeqj.de/sneak/AutistMask/issues/168). AddressDetail and
+// AddressToken used to define their own copies, so a fix to the shared pair
 // would not have reached them.
 //
 // The pair is replaced before the views are loaded, because a view takes it

tests/transactions.test.js

@@ -1,15 +1,15 @@
 // Tests for the address-poisoning defense in src/shared/transactions.js.
 //
-// README.md:730-814 describes four filters as a core security property of
-// the wallet: known token symbol verification, the low-holder threshold, the
+// README, Scam protection, describes four filters as a core security property
+// of the wallet: known token symbol verification, the low-holder threshold, the
 // fraud contract blocklist, and the dust threshold.  A regression in any of
 // them does not crash — it silently stops filtering, and poisoned look-alike
 // addresses reappear in the user's transaction history.  These tests pin the
-// behaviour down in both directions: the documented attacks must be filtered,
+// behaviour down in both directions: the two attacks below must be filtered,
 // and legitimate transactions must survive untouched.
 //
-// Fixtures are static local objects modelled on the two real attacks cited in
-// the README.  Nothing here touches the network: global.fetch is replaced
+// Fixtures are static local objects modelled on two real attacks.
+// Nothing here touches the network: global.fetch is replaced
 // with a throwing stub and the only fetch path in the module under test
 // (debugFetch, from src/shared/log) is mocked at the module boundary.
 
@@ -46,11 +46,12 @@ const { debugFetch } = require("../src/shared/log");
 const { state } = require("../src/shared/state");
 
 // ---------------------------------------------------------------------------
-// Addresses and hashes from the two attacks documented in README.md:730-814.
+// Addresses and hashes from two real attacks. README, Scam protection, has the
+// filters that stop them.
 // ---------------------------------------------------------------------------
 
-// The fake "Ethereum" token with symbol "ETH" and zero holders
-// (README.md:735-750).
+// The fake "Ethereum" token with symbol "ETH" and zero holders. See "Known
+// symbol spoofing" and "Low-holder tokens" in README, Scam protection.
 const FAKE_ETH_CONTRACT = "0xd05339f9ea5ab9d9f03b9d57f671d2abd1f55c82";
 // The fraudulent Transfer event it emitted.
 const FAKE_ETH_TRANSFER_HASH =
@@ -62,7 +63,8 @@ const LEGIT_RECIPIENT = "0xc3c693ae04bad5f13c45885c1e85a9557798f37e";
 // The scam address the fake token transfer pointed at ("0xC3C0" vs "0xC3c6").
 const TOKEN_SCAM_LOOKALIKE = "0xc3c0aea127c575b9ffd03bf11c6a878e8979c37f";
 
-// The second wave: a real 1 gwei native transfer (README.md:800-808).
+// The second wave: a real 1 gwei native transfer. See "Dust transactions" in
+// README, Scam protection.
 const DUST_TX_HASH =
     "0x2708ebddfb9b5fa3f7a89d3ea398ef9fd8771b83ed861ecb7c21cd55d18edc74";
 const DUST_SENDER_LOOKALIKE = "0xc3c6b3b4402bd78a9582ab6b00e747769344f37e";
@@ -79,7 +81,8 @@ const NOVEL_SPAM_SYMBOL = "SPAMTKN";
 // An ordinary counterparty for legitimate-transaction fixtures.
 const ORDINARY_PEER = "0x5aa0f9f1e0a1d0e0e5c1e7ce3b7dbbe9c19f0a11";
 
-// The documented default settings (README.md:810-814, state.js:24-27).
+// The documented default settings (README, Settings; DEFAULT_STATE in
+// src/shared/persistedState.js).
 const DEFAULT_FILTERS = {
     hideSpoofedSymbols: true,
     hideLowHolderTokens: true,
@@ -220,7 +223,7 @@ describe("token list assumptions the fixtures rely on", () => {
     });
 });
 
-describe("the real attacks documented in README.md:730-814", () => {
+describe("the real attacks", () => {
     test('the fake "Ethereum"/"ETH" token transfer is filtered by default', () => {
         const attack = fakeEthTokenTransfer();
         const result = filterTransactions([attack], filters());
@@ -399,8 +402,8 @@ describe("known-symbol spoof verification", () => {
     });
 
     // Turning the other three filters off must not turn this one off: each
-    // filter is independent, and this is the one the README calls out as the
-    // defense against the fake "ETH" attack.
+    // filter is independent, and this is the one that stops the fake "ETH"
+    // attack.
     test("the check still runs when the other three filters are off", () => {
         const result = filterTransactions(
             [fakeEthTokenTransfer()],

tests/uniswap.test.js

@@ -2474,10 +2474,11 @@ describe("uniswap decoder", () => {
         // SETTLE of ETH from the router's own ETH, whichever payer it names.
         // After an earlier step that may leave ETH in the router, the ETH that
         // the user pays a V4 step reads as a maximum, on lines of its own.
-        // Every row reads at least the ETH that can leave the wallet. The two
-        // rows marked "reads as on next" read the same on next. On next every
-        // other row added that ETH to the Amount line, or read it as an exact
-        // amount.
+        // Every row reads at least the ETH that can leave the wallet. The row
+        // marked "reads as on next" reads the same on next. The row with a
+        // SETTLE_ALL of at most 3 ETH read that ETH as not known on next. On
+        // next every other row added that ETH to the Amount line, or read it as
+        // an exact amount.
         //
         // ADDRESS_THIS is the router on every release.
         const ADDRESS_THIS = "0x0000000000000000000000000000000000000002";
@@ -2625,7 +2626,7 @@ describe("uniswap decoder", () => {
                 ],
                 lines: [
                     ["Amount", "600.0000 USDT"],
-                    ...wrapLines("The swap step that spends it"),
+                    ...wrapLines("The router"),
                     ...ethLines("Up to 1.0000 ETH"),
                 ],
             },
@@ -2674,7 +2675,7 @@ describe("uniswap decoder", () => {
                 ],
             },
             {
-                kind: "a WRAP_ETH of 1 ETH into the router, an UNWRAP_WETH into the router, then a V4 exact-out paid in ETH with a SETTLE_ALL of at most 3 ETH, reads as on next",
+                kind: "a WRAP_ETH of 1 ETH into the router, an UNWRAP_WETH into the router, then a V4 exact-out paid in ETH with a SETTLE_ALL of at most 3 ETH",
                 commands: [0x0b, 0x0c, 0x10],
                 inputs: [
                     WRAP_INTO_ROUTER,
@@ -2697,10 +2698,7 @@ describe("uniswap decoder", () => {
                         ],
                     ),
                 ],
-                lines: [
-                    ...wrapLines("The swap step that spends it"),
-                    ...ethLines(UNDECODED),
-                ],
+                lines: [...wrapLines("The router"), ...ethLines(UNDECODED)],
             },
             {
                 kind: "a WRAP_ETH of 1 ETH into the router, a V3 exact-out of at most 1 WETH paid from the router, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
@@ -2761,8 +2759,8 @@ describe("uniswap decoder", () => {
         // does not set the input side takes the amount it states from the
         // sender. On next no line gave that ETH. The rows marked "reads as on
         // next" state no amount to take from the sender. Uniswap's own routes
-        // wrap CONTRACT_BALANCE after their first step, as the last two rows
-        // do.
+        // wrap CONTRACT_BALANCE into the router after their first step, as the
+        // last row does.
         const CONTRACT_BALANCE = 2n ** 255n;
         const WRAP_TO_OTHER = encodeWrapEth(OTHER_ADDR, ONE_ETH);
         test.each([
@@ -2787,7 +2785,7 @@ describe("uniswap decoder", () => {
                 inputs: [V3_600, WRAP_INTO_ROUTER],
                 lines: [
                     ["Amount", "600.0000 USDT"],
-                    ...wrapLines("The swap step that spends it"),
+                    ...wrapLines("The router"),
                 ],
             },
             {
@@ -2796,7 +2794,7 @@ describe("uniswap decoder", () => {
                 inputs: [V3_600, encodeWrapEth(ROUTER_ADDR, ONE_ETH)],
                 lines: [
                     ["Amount", "600.0000 USDT"],
-                    ...wrapLines("The swap step that spends it"),
+                    ...wrapLines("The router"),
                 ],
             },
             {
@@ -2839,7 +2837,9 @@ describe("uniswap decoder", () => {
                 ],
                 lines: [
                     ["Amount", "1.0000 ETH"],
-                    ...ethLines("Up to 1.0000 ETH"),
+                    ["Moved from the sender", "Up to 1.0000 ETH"],
+                    ["Token moved", "ETH"],
+                    ["Moved to", "The router"],
                 ],
             },
             {
@@ -2877,12 +2877,6 @@ describe("uniswap decoder", () => {
                 inputs: [V3_600, encodeWrapEth(OTHER_ADDR, 0n)],
                 lines: [["Amount", "600.0000 USDT"]],
             },
-            {
-                kind: "a V3 exact-in of 600 USDT, then a WRAP_ETH of CONTRACT_BALANCE to the sender, reads as on next",
-                commands: [0x00, 0x0b],
-                inputs: [V3_600, encodeWrapEth(MSG_SENDER, CONTRACT_BALANCE)],
-                lines: [["Amount", "600.0000 USDT"]],
-            },
             {
                 kind: "a V4 swap of 600 USDT that takes ETH into the router, a WRAP_ETH of CONTRACT_BALANCE into the router, then a V3 exact-in of it, reads as on next",
                 commands: [0x10, 0x0b, 0x00],
@@ -2923,6 +2917,347 @@ describe("uniswap decoder", () => {
             expect(linesBetweenTokens(result)).toEqual(lines);
         });
 
+        // https://git.eeqj.de/sneak/AutistMask/issues/747 — a WRAP_ETH into the
+        // router pays its WETH to the router, whichever step then takes it. On
+        // next that Moved to line read The swap step that spends it in every
+        // row.
+        const SWAP_STEP = "The swap step that spends it";
+        // Each pays 1 WETH from the router, for USDC, to the user.
+        const V3_WETH_FROM_ROUTER = coder.encode(
+            ["address", "uint256", "uint256", "bytes", "bool"],
+            [
+                USER_ADDR,
+                ONE_ETH,
+                1n,
+                encodeV3Path([WETH_ADDR, USDC_ADDR]),
+                false,
+            ],
+        );
+        const V2_WETH_FROM_ROUTER = coder.encode(
+            ["address", "uint256", "uint256", "address[]", "bool"],
+            [USER_ADDR, ONE_ETH, 1n, [WETH_ADDR, USDC_ADDR], false],
+        );
+        const V4_WETH_FROM_ROUTER = encodeV4Swap(
+            new Uint8Array([
+                V4_SWAP_EXACT_IN_SINGLE_ID,
+                V4_SETTLE_ID,
+                V4_TAKE_ALL_ID,
+            ]),
+            [
+                encodeV4ExactInSingle(WETH_ADDR, USDC_ADDR, ONE_ETH, 1n),
+                settle(WETH_ADDR, 0n, false),
+                encodeV4TakeAll(USDC_ADDR, 0n),
+            ],
+        );
+        // SWEEP has the layout of TRANSFER, and its amount is a minimum.
+        const SWEEP_WETH = payOut(WETH_ADDR, 0n);
+        test.each([
+            {
+                kind: "a V3 exact-in of 600 USDT, a WRAP_ETH of 1 ETH into the router, then a SWEEP of that WETH to another address",
+                commands: [0x00, 0x0b, 0x04],
+                inputs: [V3_600, WRAP_INTO_ROUTER, SWEEP_WETH],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, a WRAP_ETH of 1 ETH into the router, a SWEEP of that WETH to another address, then a V3 exact-in paid from the router's WETH",
+                commands: [0x00, 0x0b, 0x04, 0x00],
+                inputs: [
+                    V3_600,
+                    WRAP_INTO_ROUTER,
+                    SWEEP_WETH,
+                    V3_WETH_FROM_ROUTER,
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, a WRAP_ETH of 1 ETH into the router, then a V3 exact-in of WETH that the user pays",
+                commands: [0x00, 0x0b, 0x00],
+                inputs: [
+                    V3_600,
+                    WRAP_INTO_ROUTER,
+                    encodeV3SwapExactIn(USER_ADDR, ONE_ETH, 1n, [
+                        WETH_ADDR,
+                        USDC_ADDR,
+                    ]),
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                    ["Moved from the sender", "1.0000 WETH"],
+                    ["Token moved", "WETH (" + WETH_ADDR + ")"],
+                    ["Moved to", SWAP_STEP],
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, a WRAP_ETH of 1 ETH into the router, a V3 exact-in paid from the router's WETH, then another WRAP_ETH of 1 ETH into the router",
+                commands: [0x00, 0x0b, 0x00, 0x0b],
+                inputs: [
+                    V3_600,
+                    WRAP_INTO_ROUTER,
+                    V3_WETH_FROM_ROUTER,
+                    WRAP_INTO_ROUTER,
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, a WRAP_ETH of 1 ETH into the router, then a V3 exact-in paid from the router's WETH",
+                commands: [0x00, 0x0b, 0x00],
+                inputs: [V3_600, WRAP_INTO_ROUTER, V3_WETH_FROM_ROUTER],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "the same with a V2 exact-in paid from the router's WETH",
+                commands: [0x00, 0x0b, 0x08],
+                inputs: [V3_600, WRAP_INTO_ROUTER, V2_WETH_FROM_ROUTER],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "the same with a V3 exact-out paid from the router's WETH",
+                commands: [0x00, 0x0b, 0x01],
+                inputs: [
+                    V3_600,
+                    WRAP_INTO_ROUTER,
+                    encodeV3SwapExactOut(
+                        USER_ADDR,
+                        390000000n,
+                        ONE_ETH,
+                        [USDC_ADDR, WETH_ADDR],
+                        false,
+                    ),
+                ],
+                lines: [
+                    ["Amount", "Up to 600.0000 USDT"],
+                    ["Moved from the sender", "Up to 1.0000 ETH"],
+                    ["Token moved", "ETH"],
+                    ["Moved to", "The router"],
+                ],
+            },
+            {
+                kind: "the same with a V4 swap that the router's WETH settles",
+                commands: [0x00, 0x0b, 0x10],
+                inputs: [V3_600, WRAP_INTO_ROUTER, V4_WETH_FROM_ROUTER],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router that sets the input side, a SWEEP of that WETH to another address, then an EXECUTE_SUB_PLAN",
+                commands: [0x0b, 0x04, 0x21],
+                inputs: [WRAP_INTO_ROUTER, SWEEP_WETH, SUB_PLAN],
+                lines: [
+                    ...wrapLines("The router"),
+                    ["Moved from the sender", UNDECODED],
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router that sets the input side, a V3 exact-in paid from the router's WETH, then an EXECUTE_SUB_PLAN",
+                commands: [0x0b, 0x00, 0x21],
+                inputs: [WRAP_INTO_ROUTER, V3_WETH_FROM_ROUTER, SUB_PLAN],
+                lines: [
+                    ...wrapLines("The router"),
+                    ["Moved from the sender", UNDECODED],
+                ],
+            },
+            {
+                kind: "a PERMIT2_PERMIT of 5,000 USDT to the router, a WRAP_ETH of 1 ETH into the router, then a V3 exact-in of 600 USDT",
+                commands: [0x0a, 0x0b, 0x00],
+                inputs: [
+                    encodePermit2(USDT_ADDR, 5000000000n, ROUTER_ADDR),
+                    WRAP_INTO_ROUTER,
+                    V3_600,
+                ],
+                lines: [
+                    ["Amount", "5000.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+            {
+                kind: "the same with a V3 exact-in paid from the router's WETH after the WRAP_ETH",
+                commands: [0x0a, 0x0b, 0x00, 0x00],
+                inputs: [
+                    encodePermit2(USDT_ADDR, 5000000000n, ROUTER_ADDR),
+                    WRAP_INTO_ROUTER,
+                    V3_WETH_FROM_ROUTER,
+                    V3_600,
+                ],
+                lines: [
+                    ["Amount", "5000.0000 USDT"],
+                    ...wrapLines("The router"),
+                ],
+            },
+        ])("$kind", ({ commands, inputs, lines }) => {
+            const result = decodeSteps(commands, inputs);
+            expect(linesBetweenTokens(result)).toEqual(lines);
+        });
+
+        // https://git.eeqj.de/sneak/AutistMask/issues/747 — a later WRAP_ETH
+        // of CONTRACT_BALANCE wraps all the ETH the router holds. Unless an
+        // earlier step paid ETH to the router, that is the ETH the transaction
+        // carries. On next no line gave it. Into the router it gets no lines.
+        // It gets none after an UNWRAP_WETH into the router, or while the
+        // router holds ETH from a V4 step: Uniswap's own routes pay back what
+        // their swap did not spend this way, and carry no ETH. In the rows
+        // marked "reads as on next" that WRAP_ETH gets no lines.
+        const WRAP_ALL_TO_OTHER = encodeWrapEth(OTHER_ADDR, CONTRACT_BALANCE);
+        const WRAP_ALL_TO_SENDER = encodeWrapEth(MSG_SENDER, CONTRACT_BALANCE);
+        // The lines of such a WRAP_ETH whose Moved to line reads `to`.
+        const allEthLines = (to) => [
+            ["Moved from the sender", "All the ETH the transaction carries"],
+            ["Token moved", "ETH"],
+            ["Moved to", to],
+        ];
+        // The first steps of a route that spends WETH on a V4 pool of ETH:
+        // a PERMIT2_TRANSFER_FROM of 1 WETH into the router, an UNWRAP_WETH
+        // into the router, then a V4 exact-out paid from the router's ETH.
+        const UNWRAP_ROUTE = [
+            coder.encode(
+                ["address", "address", "uint160"],
+                [WETH_ADDR, ADDRESS_THIS, ONE_ETH],
+            ),
+            UNWRAP_INTO_ROUTER,
+            encodeV4Swap(
+                new Uint8Array([
+                    V4_SWAP_EXACT_OUT_SINGLE_ID,
+                    V4_SETTLE_ID,
+                    V4_TAKE_ALL_ID,
+                ]),
+                [
+                    encodeV4ExactOutSingle(
+                        ZERO_ADDR,
+                        USDC_ADDR,
+                        390000000n,
+                        ONE_ETH,
+                    ),
+                    settle(ZERO_ADDR, 0n, false),
+                    encodeV4TakeAll(USDC_ADDR, 0n),
+                ],
+            ),
+        ];
+        // The lines of that route on next: this decoder cannot tell what the
+        // V4 step's SETTLE of ETH pays.
+        const UNWRAP_ROUTE_LINES = [
+            ["Moved from the sender", UNDECODED],
+            ["Token moved", "ETH"],
+            ["Moved to", SWAP_STEP],
+        ];
+        test.each([
+            {
+                kind: "a V3 exact-in of 600 USDT, then a WRAP_ETH of CONTRACT_BALANCE to another address",
+                commands: [0x00, 0x0b],
+                inputs: [V3_600, WRAP_ALL_TO_OTHER],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...allEthLines(OTHER_ADDR),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, then a WRAP_ETH of CONTRACT_BALANCE to the sender",
+                commands: [0x00, 0x0b],
+                inputs: [V3_600, WRAP_ALL_TO_SENDER],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...allEthLines("The sender"),
+                ],
+            },
+            {
+                kind: "a V3 exact-out of at most 600 USDT, then a WRAP_ETH of CONTRACT_BALANCE to another address",
+                commands: [0x01, 0x0b],
+                inputs: [
+                    encodeV3SwapExactOut(USER_ADDR, 390000000n, USDT_600, [
+                        USDC_ADDR,
+                        USDT_ADDR,
+                    ]),
+                    WRAP_ALL_TO_OTHER,
+                ],
+                lines: [
+                    ["Amount", "Up to 600.0000 USDT"],
+                    ...allEthLines(OTHER_ADDR),
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, then a WRAP_ETH of CONTRACT_BALANCE to another address",
+                commands: [0x0b, 0x0b],
+                inputs: [WRAP_INTO_ROUTER, WRAP_ALL_TO_OTHER],
+                lines: [["Amount", "1.0000 ETH"], ...allEthLines(OTHER_ADDR)],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, then a WRAP_ETH of CONTRACT_BALANCE into the router, reads as on next",
+                commands: [0x00, 0x0b],
+                inputs: [V3_600, encodeWrapEth(ADDRESS_THIS, CONTRACT_BALANCE)],
+                lines: [["Amount", "600.0000 USDT"]],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT, an UNWRAP_WETH to the sender, then a WRAP_ETH of CONTRACT_BALANCE to another address",
+                commands: [0x00, 0x0c, 0x0b],
+                inputs: [
+                    V3_600,
+                    encodeWrapEth(MSG_SENDER, 0n),
+                    WRAP_ALL_TO_OTHER,
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...allEthLines(OTHER_ADDR),
+                ],
+            },
+            {
+                kind: "a V4 swap of 600 USDT that takes ETH into the router, then a WRAP_ETH of CONTRACT_BALANCE to the sender, reads as on next",
+                commands: [0x10, 0x0b],
+                inputs: [
+                    encodeV4Swap(
+                        new Uint8Array([
+                            V4_SWAP_EXACT_IN_SINGLE_ID,
+                            V4_SETTLE_ID,
+                            V4_TAKE_ID,
+                        ]),
+                        [
+                            encodeV4ExactInSingle(
+                                USDT_ADDR,
+                                ZERO_ADDR,
+                                USDT_600,
+                                1n,
+                            ),
+                            settle(USDT_ADDR, 0n, true),
+                            take(ZERO_ADDR, ADDRESS_THIS, 0n),
+                        ],
+                    ),
+                    WRAP_ALL_TO_SENDER,
+                ],
+                lines: [["Amount", "600.0000 USDT"]],
+            },
+            {
+                kind: "the unwrap route, then a WRAP_ETH of CONTRACT_BALANCE to the sender, reads as on next",
+                commands: [0x02, 0x0c, 0x10, 0x0b],
+                inputs: [...UNWRAP_ROUTE, WRAP_ALL_TO_SENDER],
+                lines: UNWRAP_ROUTE_LINES,
+            },
+            {
+                kind: "the unwrap route, then a WRAP_ETH of CONTRACT_BALANCE to another address, reads as on next",
+                commands: [0x02, 0x0c, 0x10, 0x0b],
+                inputs: [...UNWRAP_ROUTE, WRAP_ALL_TO_OTHER],
+                lines: UNWRAP_ROUTE_LINES,
+            },
+        ])("$kind", ({ commands, inputs, lines }) => {
+            const result = decodeSteps(commands, inputs);
+            expect(linesBetweenTokens(result)).toEqual(lines);
+        });
+
         // A V3_SWAP_EXACT_OUT the user pays for, of at most `amountInMax`
         // USDT for USDC.
         const v3ExactOut = (amountInMax) =>