fix: sign and export with each address's own derivation index (closes #510)

Sending, site transactions, site signatures and private key export
derived the key at the address's position in the wallet's list. After
an import whose scan passed over an unused index, or after removing an
address that was not the last, that position named another address's
key.

Each HD and xprv address record now stores the index it was derived at
(at wallet creation, by the import scan, by "+"). getSignerForAddress()
derives at that index, refuses a record without one, and refuses any key
whose address differs from the record's. The confirmation screen signs
as the From address it shows, not the selected one. The export screen
reports a refusal instead of calling the password wrong.

Model: opus-5-5

README.md

@@ -239,8 +239,12 @@ provide:
   `make check` stays non-mutating. Linting runs only in the container, because
   an ESLint result that depends on whichever ESLint the host happens to have is
   not a result, so docker is required to lint.
-- `script/fmt` — format all files (writes), on the host
-- `script/fmt-check` — check formatting (read-only), on the host
+- `script/fmt` — format all files (writes), on the host, with the `prettier`
+  that `script/bootstrap` installs in `node_modules/`; when that one is missing
+  it fails and says to run `script/bootstrap`, instead of using a `prettier`
+  from the `PATH`
+- `script/fmt-check` — check formatting (read-only), on the host, with the same
+  `prettier` and the same refusal
 - `script/check` — run `script/test`, `script/lint` and `script/fmt-check`
 - `script/check-censored` — assert the competitor name RULES.md bars appears
   nowhere in the working tree or under `dist/` outside its documented
@@ -422,11 +426,12 @@ captured at `eth_sendRawTransaction` rather than against anything the extension
 reported, rejecting each prompt is required to return a rejection to the page
 rather than hang or resolve, a network switch request is required to leave the
 stored network unchanged and send no `chainChanged` until it is approved, a
-prompt raised while another approval window has focus is required to open a
-window of its own, and the password is required to be absent from every message
-the approval window sends to the background — with the message that would carry
-it required to be present, so that check cannot pass by observing nothing. That
-last one is the standing floor under
+network switch in Settings is required to send the page `chainChanged` with the
+new chain id, a prompt raised while another approval window has focus is
+required to open a window of its own, and the password is required to be absent
+from every message the approval window sends to the background — with the
+message that would carry it required to be present, so that check cannot pass by
+observing nothing. That last one is the standing floor under
 [#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
 
 The limits of that coverage and of the rest of the Chrome suite, none of them
@@ -1187,7 +1192,16 @@ The core hierarchy is **Wallets → Addresses**:
       of its stored `xpub` by `src/shared/walletDefects.js`, explained in the
       wallet list, and blocked from signing, sending and private-key export. It
       is never deleted or rewritten.
-- An **address** holds ETH and ERC-20 tokens.
+- An **address** holds ETH and ERC-20 tokens. In an HD or xprv wallet each
+  address record also stores `index`, the derivation index it was made at: 0 for
+  the first address, the index the import scan found it at, or `nextIndex` when
+  "+" added it. An address's `index` and its position in the wallet's list
+  differ once the scan has passed over an unused index or an address has been
+  removed. Sending, site transactions, site signatures and private-key export
+  derive the key at `index`, and refuse it unless it is that address's own key;
+  an HD or xprv address with no valid `index` is refused before anything is
+  derived (`getSignerForAddress()` in `src/shared/wallet.js`). Each refusal is a
+  full sentence naming the address.
 - The user can have multiple wallets, each with multiple addresses (HD) or a
   single address (key).
 
@@ -1513,6 +1527,9 @@ view would leave a wallet one click from deletion.
       change)
     - "Reveal" (wrong password) → full-sentence error on the error line, nothing
       revealed (no screen change)
+    - "Reveal" (correct password, but this address's key is refused, see Data
+      Model) → full-sentence error saying why, nothing revealed (no screen
+      change)
     - "Back" → previous screen (AddressDetail)
     - Settings gear → **Settings**, whose "Back" goes to AddressDetail: leaving
       drops the address the screen was showing, so it also takes the screen off
@@ -1640,8 +1657,21 @@ view would leave a wallet one click from deletion.
       the contract's own answer is read at signing time only to be compared with
       it, and a disagreement is a refusal rather than a preference for either
       value (`src/shared/transferAmount.js`)
+    - "Sign & Send" after the active network was switched in Settings while this
+      screen was open → nothing is signed; "The active network changed after
+      this transaction was reviewed, so it was not sent. Please go back and
+      review it again." in the errors box, no screen change. The transaction
+      carries the chain id of the network the screen was shown for, so it cannot
+      be signed for another
     - "Sign & Send" (wrong password) → "Wrong password." on the password error
       line, no screen change
+    - "Sign & Send" signs as the From address above, not as whichever address is
+      selected: the two are saved separately, so the popup can reopen onto this
+      screen with another address selected. When the selected wallet does not
+      hold the From address → full-sentence error on the password error line,
+      nothing sent (no screen change)
+    - "Sign & Send" (correct password, but the From address's key is refused,
+      see Data Model) → nothing is signed → **ErrorTx** saying why
     - "Back" → **Send**
 
 #### WaitTx (`wait-tx`)
@@ -1789,7 +1819,8 @@ view would leave a wallet one click from deletion.
       network changes only here, or when the user approves a site's request on
       **NetworkApproval**; either way, switching restores the RPC and Blockscout
       endpoints last used on that network, or that network's defaults if it has
-      none
+      none, and sends `chainChanged` with the new chain id to every open tab.
+      Choosing the network already active changes nothing and sends nothing
     - Ethereum RPC: endpoint URL input + "Save" button (validated against
       `eth_chainId` before being saved)
     - Blockscout API: endpoint URL input + "Save" button (validated against
@@ -2069,7 +2100,9 @@ view would leave a wallet one click from deletion.
   artifact can be compared with it field for field. A nonce the site supplies is
   ignored: the nonce is always the account's next nonce from the node, so a site
   cannot replace one of the user's pending transactions or leave this one stuck
-  behind a gap. A request that cannot be populated — unreachable node, reverting
+  behind a gap. A gas limit the site supplies, as `gas` or `gasLimit`, is used
+  in place of the node's estimate; a request giving both with different values
+  is refused. A request that cannot be populated — unreachable node, reverting
   gas estimate — opens no window and is failed back to the site. Only one
   transaction approval exists at a time: populating fixes the nonce, so a second
   `eth_sendTransaction` arriving while one is unanswered is refused with
@@ -2104,6 +2137,9 @@ view would leave a wallet one click from deletion.
       shown, exactly as shown, hands the signed transaction to the background to
       broadcast, then → **WaitTx** in the same popup window
     - "Confirm" (wrong password) → error line, no screen change
+    - "Confirm" (correct password, but the From address's key is refused, see
+      Data Model) → full-sentence error on the error line saying why, nothing
+      signed (no screen change)
     - "Reject" → closes popup (returns rejection to background)
     - Popup window closed without answering → the request is rejected with
       EIP-1193 code 4001
@@ -2122,7 +2158,12 @@ view would leave a wallet one click from deletion.
       blocklist)
     - Site origin (bold, scheme and port included) + "wants you to sign a
       message"
-    - Danger warning box (shown for `eth_sign`, which signs a raw hash)
+    - Warning box, shown for `eth_sign`: "This site used the older eth_sign
+      method. The data will be signed as a personal message." An `eth_sign`
+      request names the address first and the data second. Its data is signed
+      exactly as a `personal_sign` message is, as an EIP-191 personal message,
+      which is what the Ethereum JSON-RPC specification defines `eth_sign` to
+      return.
     - Type: "Personal message" or "Typed data (EIP-712)"
     - From: color dot + full address + etherscan link
     - Message: for `personal_sign` and `eth_sign`, the text the message's bytes
@@ -2158,6 +2199,13 @@ view would leave a wallet one click from deletion.
     - Typed data that states no primary type, or one other than the type it
       would be signed as, or that cannot be read → shown with the error line
       saying so and "Sign" disabled; only "Reject" remains
+    - Typed data whose domain `chainId` names a chain other than the active
+      network's → shown with the error line naming both chain ids and "Sign"
+      disabled; only "Reject" remains. EIP-712 asks for this, because the
+      signature is valid on the chain the domain names. Typed data with no
+      `chainId` is not refused. The background refuses such a signature too,
+      against the network active when the signature reaches it, and answers the
+      site with the same sentence
     - A `personal_sign` or `eth_sign` message that is not hex (`0x` or `0X` and
       an even number of hex digits, the form ethers' `getBytes` reads when
       signing) → shown as plain text, with the error line "This message is plain
@@ -2650,7 +2698,8 @@ plaintext list of anyone's domain names.
 When a dApp on a blocklisted domain requests a wallet connection, transaction
 approval, or signature, the approval popup displays a prominent red warning
 banner alerting the user. The domain checker matches exact hostnames and all
-parent domains (subdomain matching).
+parent domains (subdomain matching), and checks a hostname written with a
+trailing dot (`name.`) as `name`.
 
 #### Transaction Decoding
 

TODO.md

@@ -2,10 +2,9 @@
 
 - `git pull` `next` and cut a branch from it — one branch per issue, named
   `issue-<N>-<slug>`. Never branch from `main`.
-- Do the work as one commit whose title ends with ` (closes #N)`, with the
-  `TODO.md` update in that same commit.
-- Move Next Step to the top of Completed Steps; move the top item of Future
-  Steps into Next Step.
+- Do the work as one commit whose title ends with ` (closes #N)`.
+- Add no entry to Completed Steps. What landed is recorded on the tracker and in
+  `git log`, where each commit title names the issue it closes.
 - Run `make fmt`, then `make check`. A feature branch may be red; `next` and
   `main` may not.
 - Rebase onto current `next` immediately before pushing — other branches land on
@@ -44,6 +43,25 @@ then continue tagging as milestones land.
 
 # Completed Steps
 
+- 2026-10-08: The browser suites no longer read a screen before the page has
+  shown it ([#502](https://git.eeqj.de/sneak/AutistMask/issues/502)). Their wait
+  for a screen used to pass as soon as the element laid out, which every view
+  does until the page's stylesheet has applied, so an approval test could read
+  the prompt's fields before the page's script had filled them. `visible()` in
+  `tests/e2e/harness.js` and `waitVisible()` in `tests/e2e/firefox/driver.js`
+  now also wait for the page to finish loading and for neither the element nor
+  anything around it to carry the `hidden` class that `showView()` puts on every
+  view but the current one. No caller changed.
+
+- 2026-10-08: Switching the network in Settings now tells open pages
+  ([#500](https://git.eeqj.de/sneak/AutistMask/issues/500)). Once the switch is
+  saved, Settings asks the background to send `chainChanged` with the new chain
+  id to every open tab, through the same function an approved site request uses.
+  Choosing the network already active changes nothing and sends nothing. Only
+  the extension's own pages can ask for this. `tests/chainSwitchGate.test.js`
+  drives the real Settings view against the background, and the Chrome suite
+  checks that the test page hears both switches.
+
 - 2026-10-07: A site can no longer switch the wallet's network by itself
   ([#408](https://git.eeqj.de/sneak/AutistMask/issues/408)). A connected site's
   `wallet_switchEthereumChain` request for the other supported network opens a

script/fmt

@@ -25,6 +25,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt: this repo's prettier is not installed in node_modules/," \
+            "so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Formatting..."
     run_yarn run fmt
 }

script/fmt-check

@@ -26,6 +26,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt-check: this repo's prettier is not installed in" \
+            "node_modules/, so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Checking formatting..."
     run_yarn run fmt-check
 }

src/background/index.js

@@ -22,6 +22,7 @@ const { debugFetch, log } = require("../shared/log");
 const {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     failureIsRetryable,
     describeTxFailure,
     sameAddress,
@@ -632,8 +633,9 @@ function isExtensionSender(sender) {
 // had refused.
 //
 // TX and sign approvals do not decide here. They stay pending across a
-// disconnect — the user can reopen the toolbar popup — and are rejected by the
-// windows.onRemoved listener below.
+// disconnect. When their window closes, the windows.onRemoved listener below
+// rejects them, unless an approved attempt is still running, in which case
+// that attempt answers the page.
 runtime.onConnect.addListener((port) => {
     if (port.name.startsWith("approval:")) {
         const id = port.name.split(":")[1];
@@ -661,7 +663,9 @@ runtime.onConnect.addListener((port) => {
             const approval = pendingApprovals[id];
             if (approval) {
                 if (approval.type === "tx" || approval.type === "sign") {
-                    // Keep pending — user can reopen the toolbar popup
+                    // When its window closes, windows.onRemoved rejects it,
+                    // unless an approved attempt is still running, in which
+                    // case that attempt answers the page.
                     return;
                 }
                 settleApproval(id, { approved: false, remember: false });
@@ -984,9 +988,8 @@ async function handleRpc(method, params, origin) {
 
         if (method === "eth_sign") {
             signParams.dangerWarning =
-                "\u26a0\ufe0f DANGER: This site is requesting to sign a raw hash. " +
-                "This can be used to sign transactions that drain your funds. " +
-                "Only proceed if you fully understand what you are signing.";
+                "This site used the older eth_sign method. " +
+                "The data will be signed as a personal message.";
         }
 
         if (findPendingApproval(origin, "sign")) {
@@ -1471,6 +1474,7 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
         "AUTISTMASK_ADDRESSES_REMOVED",
         "AUTISTMASK_GET_CONNECTED_SITES",
         "AUTISTMASK_REMOVE_SITE",
+        "AUTISTMASK_NETWORK_CHANGED",
     ];
     if (POPUP_ONLY_TYPES.includes(msg.type) && !isExtensionSender(sender)) {
         sendResponse({ error: "Unauthorized sender" });
@@ -1763,7 +1767,8 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
 
         (async () => {
             try {
-                const activeAddress = await getActiveAddress();
+                const s = await getState();
+                const activeAddress = activeAddressOf(s);
                 // Same as the transaction path: the address the approval named
                 // is the one that must have signed, and a switch since then is
                 // a refusal rather than a signature from another account.
@@ -1782,6 +1787,20 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
                     signature,
                     approval.approvedFrom,
                 );
+                // The sign screen refuses typed data whose domain names
+                // another chain. A signature for it that arrives anyway is
+                // refused here, against the network active now.
+                const sp = approval.signParams;
+                if (
+                    sp.method === "eth_signTypedData_v4" ||
+                    sp.method === "eth_signTypedData"
+                ) {
+                    const refusal = typedDataChainRefusal(
+                        JSON.parse(sp.typedData).domain,
+                        networkById(s.networkId),
+                    );
+                    if (refusal) throw new ApprovalMismatchError(refusal);
+                }
                 settleApproval(msg.id, { signature }, { holdsClaim: true });
                 sendResponse({ signature });
             } catch (e) {
@@ -1854,6 +1873,13 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
         broadcastSiteRemoved(msg.origin);
         return false;
     }
+
+    // Settings switched the network and has saved it. Open tabs are told the
+    // new chain id the same way as after a site's approved switch request.
+    if (msg.type === "AUTISTMASK_NETWORK_CHANGED") {
+        broadcastChainChanged(msg.chainId);
+        return false;
+    }
 });
 
 module.exports = { PROXY_METHODS };

src/popup/index.html

@@ -7,9 +7,10 @@
         <link rel="stylesheet" href="styles.css" />
     </head>
     <!-- Chrome gives extension pages a stylesheet of its own that sets the
-         font on body, and a Tailwind class beats it only when marked
-         important: hence font-mono! rather than font-mono. -->
-    <body class="bg-bg text-fg font-mono! text-sm">
+         font and its size on body, and a Tailwind class beats it only when
+         marked important: hence font-mono! and text-sm! rather than
+         font-mono and text-sm. -->
+    <body class="bg-bg text-fg font-mono! text-sm!">
         <div id="app" class="p-2 pr-5 overflow-x-hidden">
             <!-- ============ GLOBAL TITLE BAR ============ -->
             <div
@@ -87,11 +88,14 @@
 
                 <!-- Mnemonic form section -->
                 <div id="add-wallet-section-mnemonic">
-                    <p class="mb-2">
-                        Enter your 12 or 24 word recovery phrase below, or click
-                        the button to roll the die for a new one.
+                    <!-- The die button shares the instruction's row: on a row
+                         of its own it pushes Import below the fold at
+                         360x600. -->
+                    <div class="mb-2 flex justify-between items-start gap-2">
+                        <p>
+                            Enter your 12 or 24 word recovery phrase below, or
+                            click the button to roll the die for a new one.
                         </p>
-                    <div class="mb-1 flex justify-end">
                         <button
                             id="btn-generate-phrase"
                             class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer text-xs"

src/popup/views/addWallet.js

@@ -184,7 +184,12 @@ async function importMnemonic(ctx) {
         encryptedSecret: encrypted,
         nextIndex: 1,
         addresses: [
-            { address: firstAddress, balance: "0.0000", tokenBalances: [] },
+            {
+                address: firstAddress,
+                index: 0,
+                balance: "0.0000",
+                tokenBalances: [],
+            },
         ],
     };
     state.wallets.push(wallet);
@@ -205,6 +210,7 @@ async function importMnemonic(ctx) {
     if (scan.addresses.length > 1) {
         wallet.addresses = scan.addresses.map((a) => ({
             address: a.address,
+            index: a.index,
             balance: "0.0000",
             tokenBalances: [],
         }));
@@ -299,7 +305,12 @@ async function importXprvKey(ctx) {
         encryptedSecret: encrypted,
         nextIndex: 1,
         addresses: [
-            { address: firstAddress, balance: "0.0000", tokenBalances: [] },
+            {
+                address: firstAddress,
+                index: 0,
+                balance: "0.0000",
+                tokenBalances: [],
+            },
         ],
     };
     state.wallets.push(wallet);
@@ -320,6 +331,7 @@ async function importXprvKey(ctx) {
     if (scan.addresses.length > 1) {
         wallet.addresses = scan.addresses.map((a) => ({
             address: a.address,
+            index: a.index,
             balance: "0.0000",
             tokenBalances: [],
         }));

src/popup/views/approval.js

@@ -12,7 +12,7 @@ const {
     formatFee,
     tokenLabel,
 } = require("./helpers");
-const { state, saveState } = require("../../shared/state");
+const { state, saveState, currentNetwork } = require("../../shared/state");
 const {
     networkById,
     networkByChainId,
@@ -46,7 +46,10 @@ const {
 const { decryptWithPassword } = require("../../shared/vault");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { walletDefect } = require("../../shared/walletDefects");
-const { describeSigningFailure } = require("../../shared/approvalVerify");
+const {
+    describeSigningFailure,
+    typedDataChainRefusal,
+} = require("../../shared/approvalVerify");
 const txStatus = require("./txStatus");
 const uniswap = require("../../shared/uniswap");
 const { notify, runtimeApi, sendMessage } = require("../../shared/browserApi");
@@ -443,7 +446,8 @@ function signedPrimaryType(types) {
 // Why a signature request cannot be signed, as a sentence for the error line,
 // or null when it can. Only typed data is refused: the `primaryType` the page
 // states has to be the type ethers will sign, or this screen would name one
-// message while another is signed.
+// message while another is signed. Its domain may name no chain but the active
+// network's.
 function typedDataRefusal(sp) {
     if (sp.method === "personal_sign" || sp.method === "eth_sign") return null;
     let data;
@@ -466,7 +470,7 @@ function typedDataRefusal(sp) {
             ", so it cannot be signed."
         );
     }
-    return null;
+    return typedDataChainRefusal(data.domain, currentNetwork());
 }
 
 // The largest amount a Permit2 allowance can hold, a uint160. Permit2 treats
@@ -721,7 +725,7 @@ function showSignApproval(details) {
             "This message is plain text, not hex, so it cannot be signed.";
     }
 
-    // Display danger warning for eth_sign (raw hash signing)
+    // The warning the background attaches to an eth_sign request.
     const warningEl = $("approve-sign-danger-warning");
     if (warningEl) {
         if (sp.dangerWarning) {
@@ -863,15 +867,15 @@ function gateOnWalletDefect(errorId, buttonId, address) {
     return true;
 }
 
-// Locate the wallet and the address index owning an address. Returns null when
-// no wallet holds it. Approvals look up the address they were raised for, not
-// whichever address is active now: the approval named one account, and signing
-// with another is what verification refuses.
+// Locate the wallet and the stored address record owning an address. Returns
+// null when no wallet holds it. Approvals look up the address they were raised
+// for, not whichever address is active now: the approval named one account,
+// and signing with another is what verification refuses.
 function findWalletFor(address) {
     for (const wallet of state.wallets) {
         for (let i = 0; i < wallet.addresses.length; i++) {
             if (wallet.addresses[i].address === address) {
-                return { wallet, addrIndex: i };
+                return { wallet, addr: wallet.addresses[i] };
             }
         }
     }
@@ -998,7 +1002,7 @@ function init(_ctx) {
         try {
             const signer = getSignerForAddress(
                 active.wallet,
-                active.addrIndex,
+                active.addr,
                 decryptedSecret,
             );
             // Sign the approved transaction exactly as it was displayed. The
@@ -1126,7 +1130,7 @@ function init(_ctx) {
         try {
             const signer = getSignerForAddress(
                 active.wallet,
-                active.addrIndex,
+                active.addr,
                 decryptedSecret,
             );
             const sp = pendingSignParams;

src/popup/views/confirmTx.js

@@ -101,6 +101,10 @@ function show(txInfo) {
     feeStatus = FEE_PENDING;
     feeWei = null;
     maxSendFees = null;
+    // The network this screen is drawn for, and the only one it sends on:
+    // Settings can switch the active network while the screen is open. The
+    // wait, success and error screens label the amount by it too.
+    txInfo.chainId = currentNetwork().chainId;
 
     const isErc20 = txInfo.token !== "ETH";
     // The raw symbol is the price-table key; the capped one is what the
@@ -490,7 +494,12 @@ async function populateVerifyAndSend(connectedSigner, tx, fees = null) {
         );
         request = await contract.transfer.populateTransaction(tx.to, amount);
     }
-    const populated = await connectedSigner.populateTransaction(request);
+    // The chain id of the network the screen was drawn for: ethers refuses to
+    // populate it for a provider on any other network.
+    const populated = await connectedSigner.populateTransaction({
+        ...request,
+        chainId: tx.chainId,
+    });
     assertWithinCeilings(populated);
     return connectedSigner.sendTransaction(populated);
 }
@@ -547,6 +556,30 @@ function init(_ctx) {
             return;
         }
 
+        // Back from Settings only unhides this screen, still drawn for the
+        // network that was active when it was shown.
+        if (currentNetwork().chainId !== pendingTx.chainId) {
+            showSendError(
+                "The active network changed after this transaction was" +
+                    " reviewed, so it was not sent. Please go back and review" +
+                    " it again.",
+            );
+            return;
+        }
+
+        // Sign as the From address this screen shows. The selection is saved
+        // apart from this screen, so the popup can reopen onto it with another
+        // address selected.
+        const addr = wallet.addresses.find((a) => a.address === pendingTx.from);
+        if (!addr) {
+            showError(
+                "confirm-tx-password-error",
+                "The selected wallet does not hold the From address above, " +
+                    "so nothing was sent. Please go back and send again.",
+            );
+            return;
+        }
+
         const password = $("confirm-tx-password").value;
         if (!password) {
             showError(
@@ -575,17 +608,9 @@ function init(_ctx) {
         $("btn-confirm-send").disabled = true;
         $("btn-confirm-send").classList.add("text-muted");
 
-        // The network it is sent on. The wait, success and error screens
-        // label its amount by this, not by the network active when they draw.
-        pendingTx.chainId = currentNetwork().chainId;
-
         let tx;
         try {
-            const signer = getSignerForAddress(
-                wallet,
-                state.selectedAddress,
-                decryptedSecret,
-            );
+            const signer = getSignerForAddress(wallet, addr, decryptedSecret);
             const provider = getProvider(state.rpcUrl, state.networkId);
             const connectedSigner = signer.connect(provider);
 

src/popup/views/exportPrivkey.js

@@ -135,7 +135,18 @@ async function reveal() {
         // decrypt ran, the wipe has already happened, so the key is not
         // even derived, let alone written.
         if (!isCurrentReveal(generation)) return;
-        const signer = getSignerForAddress(wallet, addressIndex, secret);
+        let signer;
+        try {
+            signer = getSignerForAddress(
+                wallet,
+                wallet.addresses[addressIndex],
+                secret,
+            );
+        } catch (e) {
+            // The password was right; it is the key that was refused.
+            showError("export-privkey-password-error", e.message);
+            return;
+        }
         $("export-privkey-password").value = "";
         $("export-privkey-password-section").classList.add("hidden");
         $("export-privkey-value").textContent = signer.privateKey;

src/popup/views/home.js

@@ -354,6 +354,7 @@ function render(ctx) {
             );
             wallet.addresses.push({
                 address: newAddr,
+                index: wallet.nextIndex,
                 balance: "0.0000",
                 tokenBalances: [],
             });

src/popup/views/settings.js

@@ -316,7 +316,11 @@ function init(ctx) {
     const networkSelect = $("settings-network");
     networkSelect.addEventListener("change", async () => {
         const newId = networkSelect.value;
+        if (newId === state.networkId) return;
         const net = await onChainSwitch(newId);
+        // Open pages are told by the background, as after a site's approved
+        // switch request.
+        notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
         $("settings-rpc").value = state.rpcUrl;
         $("settings-blockscout").value = state.blockscoutUrl;
         showFlash("Switched to " + net.name + ".");

src/shared/approvalTx.js

@@ -1,13 +1,14 @@
 // Preparation of the transaction an approval screen displays.
 //
-// A dApp's eth_sendTransaction normally fixes only `to`, `value` and `data`.
-// The nonce, the gas limit and the fees have to be filled in from the network
-// before anything can be signed, and whoever fills them in decides what the
-// user is shown. That work used to happen in the popup, after the user had
-// already approved: the numbers on the approval screen came from the popup and
-// were compared against nothing, so a compromised popup could display one fee
-// and sign another, and the ceilings in approvalVerify.js were all that stood
-// between the user and a fee that hands the validator the balance.
+// A dApp's eth_sendTransaction normally fixes `to`, `value` and `data`, and
+// sometimes the gas limit. The nonce, the fees, and the gas limit when the
+// site gives none have to be filled in from the network before anything can
+// be signed, and whoever fills them in decides what the user is shown. That
+// work used to happen in the popup, after the user had already approved: the
+// numbers on the approval screen came from the popup and were compared against
+// nothing, so a compromised popup could display one fee and sign another, and
+// the ceilings in approvalVerify.js were all that stood between the user and a
+// fee that hands the validator the balance.
 //
 // So it happens here instead, in the background, before the approval window is
 // opened. The background populates the transaction, shows that object, and
@@ -31,6 +32,7 @@ const {
     VoidSigner,
     accessListify,
     getAddress,
+    getBigInt,
     getBytes,
     hexlify,
     toQuantity,
@@ -47,10 +49,11 @@ const {
 // minutes long, which is not a wait anyone will sit through.
 const POPULATE_TIMEOUT_MS = 20000;
 
-// The request fields taken from the page. Anything else is dropped rather than
-// passed to ethers: the object is page-controlled, and a future ethers that
-// learns to carry a new transaction field must not start picking one up out of
-// it without this module knowing.
+// The request fields taken from the page, plus `gas`, which requestFrom()
+// takes as the gas limit. Anything else is dropped rather than passed to
+// ethers: the object is page-controlled, and a future ethers that learns to
+// carry a new transaction field must not start picking one up out of it
+// without this module knowing.
 //
 // The nonce is not taken from the page; it is always the account's next nonce
 // from the network. A page that chose it could replace one of the user's
@@ -84,6 +87,16 @@ function present(v) {
     return v !== null && v !== undefined && v !== "";
 }
 
+// Whether two quantities from the page are the same number. One that is not a
+// number matches nothing.
+function sameQuantity(a, b) {
+    try {
+        return getBigInt(a) === getBigInt(b);
+    } catch {
+        return false;
+    }
+}
+
 // These strings reach the user through the requesting page, so they are full
 // sentences even when the tail of one came from ethers or from the node.
 function sentence(text) {
@@ -111,6 +124,20 @@ function requestFrom(txParams, from) {
     for (const key of REQUEST_FIELDS) {
         if (present(txParams[key])) request[key] = txParams[key];
     }
+    // JSON-RPC calls the gas limit `gas`, and that is the name sites send.
+    // ethers only reads `gasLimit`: left as `gas` it would be dropped and an
+    // estimate signed in its place.
+    if (present(txParams.gas)) {
+        if (
+            present(request.gasLimit) &&
+            !sameQuantity(request.gasLimit, txParams.gas)
+        ) {
+            throw fail(
+                "The site asked for two different gas limits for this transaction.",
+            );
+        }
+        request.gasLimit = txParams.gas;
+    }
     if (
         present(request.type) &&
         !ALLOWED_TX_TYPES.includes(Number(request.type))

src/shared/approvalVerify.js

@@ -53,6 +53,7 @@ const {
     accessListify,
     formatEther,
     getAddress,
+    getBigInt,
     getBytes,
     toQuantity,
     verifyMessage,
@@ -635,6 +636,33 @@ function verifySignature(signParams, signature, expectedFrom) {
     return recovered;
 }
 
+// Why typed data cannot be signed while `network` is the active network, as a
+// sentence, or null when it can. EIP-712 has a wallet refuse typed data whose
+// domain names another chain, because the signature is valid on that chain.
+// ethers signs no chain id when the domain's is null or absent, and reads any
+// other with getBigInt(), so 1, "1" and "0x1" are the same chain here too.
+function typedDataChainRefusal(domain, network) {
+    const chainId = domain?.chainId;
+    if (chainId === undefined || chainId === null) return null;
+    let named;
+    try {
+        named = getBigInt(chainId);
+    } catch {
+        return "This typed data cannot be read, so it cannot be signed.";
+    }
+    const active = getBigInt(network.chainId);
+    if (named === active) return null;
+    return (
+        "This typed data is for chain id " +
+        named +
+        ", but the active network is " +
+        network.name +
+        " (chain id " +
+        active +
+        "), so it cannot be signed."
+    );
+}
+
 // The stage a transaction approval failed at. Which stage it is decides
 // whether the approval survives the failure.
 const TX_STAGE_SIGN = "sign";
@@ -796,6 +824,7 @@ function describeSigningFailure(response, fallbackMessage) {
 module.exports = {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     assertNoForbiddenFields,
     assertNothingUnchecked,
     assertCanonicalBytes,

src/shared/phishingDomains.js

@@ -110,11 +110,14 @@ function hashListed(hash) {
  * Generate hostname variants for subdomain matching.
  * "sub.evil.com" yields ["sub.evil.com", "evil.com"].
  *
+ * A trailing dot is dropped: "evil.com." is the fully qualified spelling of
+ * "evil.com", and the browser loads the same site from either.
+ *
  * @param {string} hostname
  * @returns {string[]}
  */
 function hostnameVariants(hostname) {
-    const h = hostname.toLowerCase();
+    const h = hostname.toLowerCase().replace(/\.$/, "");
     const variants = [h];
     const parts = h.split(".");
     // Parent domains: a.b.c.d -> b.c.d, c.d

src/shared/wallet.js

@@ -110,16 +110,33 @@ function addressFromPrivateKey(key) {
     return w.address;
 }
 
-function getSignerForAddress(walletData, addrIndex, decryptedSecret) {
+// The signer for `addr`, one of the wallet's stored address records. An HD or
+// xprv address is derived at its own `index`, never at its position in the
+// wallet's list: the two differ once an import scan passes over an unused
+// index, or once an address that is not the last is removed. An HD or xprv
+// record without a valid `index` is refused before anything is derived.
+// Whatever the wallet type, the key is refused unless it is the key of
+// `addr.address`.
+function getSignerForAddress(walletData, addr, decryptedSecret) {
+    if (
+        (walletData.type === "hd" || walletData.type === "xprv") &&
+        !(Number.isInteger(addr.index) && addr.index >= 0)
+    ) {
+        throw new Error(
+            "No derivation index is stored for " +
+                addr.address +
+                ", so its key cannot be derived.",
+        );
+    }
+    let signer;
     if (walletData.type === "hd") {
         const node = HDNodeWallet.fromPhrase(
             decryptedSecret,
             "",
             BIP44_ETH_PATH,
         );
-        return node.deriveChild(addrIndex);
-    }
-    if (walletData.type === "xprv") {
+        signer = node.deriveChild(addr.index);
+    } else if (walletData.type === "xprv") {
         // Checked here rather than through masterXprvOrThrow so the message
         // fits the situation: nobody is importing anything at signing time,
         // and this wallet is already in storage. src/shared/walletDefects.js
@@ -137,9 +154,18 @@ function getSignerForAddress(walletData, addrIndex, decryptedSecret) {
                     "is not a master key, so it cannot sign.",
             );
         }
-        return node.derivePath(BIP44_ETH_PATH).deriveChild(addrIndex);
+        signer = node.derivePath(BIP44_ETH_PATH).deriveChild(addr.index);
+    } else {
+        signer = new Wallet(decryptedSecret);
     }
-    return new Wallet(decryptedSecret);
+    if (signer.address.toLowerCase() !== addr.address.toLowerCase()) {
+        throw new Error(
+            "The key this wallet holds for " +
+                addr.address +
+                " belongs to a different address, so it was not used.",
+        );
+    }
+    return signer;
 }
 
 function isValidMnemonic(mnemonic) {

src/shared/walletDefects.js

@@ -36,11 +36,13 @@ const DEFECTS = {
                 "derivation path beneath that key instead of from a master " +
                 "key, so the addresses listed here are not the ones that key " +
                 "produces under the standard path.",
-            "Signing and sending are disabled for this wallet. The addresses " +
-                "do descend from the extended private key you imported, so " +
-                "anything they hold is still reachable by software that " +
-                "repeats the same non-standard derivation. Check them in a " +
-                "block explorer before deciding what to do.",
+            "Signing, sending and private key export are disabled for this " +
+                "wallet. Anything these addresses hold can be reached outside " +
+                "this wallet with the extended private key you imported, if " +
+                "you kept a copy of it, or with the master extended private " +
+                "key or recovery phrase it came from, in software that " +
+                "repeats the same non-standard derivation. Check the " +
+                "addresses in a block explorer before deciding what to do.",
             "To see the addresses this key produces under the standard path, " +
                 "import the master extended private key, or the recovery " +
                 "phrase it came from, as a new wallet. Nothing here has been " +

tests/addressKey.test.js

@@ -0,0 +1,439 @@
+// Sending, a site's signature request and private key export each use the key
+// of the address they name: the key at the index that address was derived at,
+// not the one at its position in the wallet's list. The two differ after an
+// import whose scan passed over an unused index, and after an address that is
+// not the last is removed (https://git.eeqj.de/sneak/AutistMask/issues/510).
+// A send is signed by the From address its confirmation screen shows, whichever
+// address is selected.
+//
+// Driven through the real import, "+" button, address removal, confirmation
+// screen, signature approval screen and export screen, with the node, the vault
+// and the DOM stubbed.
+
+"use strict";
+
+// The addresses the stub node reports a balance for, and the signed
+// transactions it was handed.
+const mockNode = { funded: new Set(), broadcast: [] };
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        async getBalance(address) {
+            return mockNode.funded.has(address) ? 1n : 0n;
+        }
+        async getTransactionCount() {
+            return 0;
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getFeeData() {
+            return {
+                maxFeePerGas: 20000000000n,
+                maxPriorityFeePerGas: 1000000000n,
+                gasPrice: 10000000000n,
+            };
+        }
+        async getNetwork() {
+            return { chainId: 1n };
+        }
+        async getCode() {
+            return "0x";
+        }
+        async lookupAddress() {
+            return null;
+        }
+        async broadcastTransaction(signed) {
+            mockNode.broadcast.push(signed);
+            return { hash: "0x" + "ab".repeat(32) };
+        }
+    }
+    return { ...actual, JsonRpcProvider: StubProvider };
+});
+
+// No password is hashed: what the wallet stores is the phrase itself.
+jest.mock("../src/shared/vault", () => ({
+    encryptWithPassword: async (secret) => secret,
+    decryptWithPassword: async (secret) => secret,
+}));
+
+// The wait screen polls for a receipt; these tests stop at the broadcast.
+jest.mock("../src/popup/views/txStatus", () => ({
+    showWait: jest.fn(),
+    showError: jest.fn(),
+}));
+
+jest.mock("ethereum-blockies-base64", () => () => "data:image/png;base64,x");
+
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+const {
+    HDNodeWallet,
+    Mnemonic,
+    Transaction,
+    getBytes,
+    verifyMessage,
+} = require("ethers");
+
+// Publicly known development phrase; never fund it.
+const PHRASE = "test test test test test test test test test test test junk";
+// PHRASE's master extended private key, as the xprv import takes it.
+const XPRV = HDNodeWallet.fromSeed(
+    Mnemonic.fromPhrase(PHRASE).computeSeed(),
+).extendedKey;
+const PASSWORD = "correct horse battery staple";
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+// "Hello", as the hex a page sends.
+const MESSAGE = "0x48656c6c6f";
+
+// The address and key at derivation index `index` of PHRASE, worked out with
+// ethers directly rather than through the wallet's own code.
+function derived(index) {
+    return HDNodeWallet.fromPhrase(PHRASE, "", "m/44'/60'/0'/0/" + index);
+}
+
+// ------------------------------------------------------------ DOM stub
+
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        title: "",
+        value: "",
+        innerHTML: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        listeners: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: (n, force) => {
+                const on = force === undefined ? !classes.has(n) : force;
+                if (on) classes.add(n);
+                else classes.delete(n);
+                return on;
+            },
+        },
+        addEventListener: (name, fn) => {
+            el.listeners[name] = el.listeners[name] || [];
+            el.listeners[name].push(fn);
+        },
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    // Views reach for .parentElement to hide whole sections.
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            // The debug banner is created on demand by helpers.js; absent
+            // is the state a non-debug, non-testnet popup is in.
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        addEventListener: () => {},
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+function click(element) {
+    const event = { stopPropagation: () => {} };
+    return Promise.all((element.listeners.click || []).map((fn) => fn(event)));
+}
+
+// show() starts the fee estimate without awaiting it; this lets it settle.
+async function settle() {
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+// ------------------------------------------------------------ harness
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const { state } = require("../src/shared/state");
+const { removeAddressFromState } = require("../src/shared/walletDelete");
+const addWallet = require("../src/popup/views/addWallet");
+const home = require("../src/popup/views/home");
+const confirmTx = require("../src/popup/views/confirmTx");
+const approval = require("../src/popup/views/approval");
+const exportPrivkey = require("../src/popup/views/exportPrivkey");
+const txStatus = require("../src/popup/views/txStatus");
+
+// What the background answers when the approval window asks which approval it
+// was opened for, and every message the popup sent it.
+let approvalDetails;
+let sent;
+
+// The "+" button of the wallet list's last render. Each render attaches the
+// handler to the buttons it drew, as the browser's fresh list would have.
+let plusButton;
+
+beforeEach(() => {
+    approvalDetails = null;
+    sent = [];
+    mockNode.broadcast = [];
+    globalThis.document = makeDocument();
+    globalThis.window = { close: () => {} };
+    globalThis.chrome = {
+        storage: { local: { get: async () => ({}), set: async () => {} } },
+        runtime: {
+            connect: () => ({ postMessage: () => {} }),
+            sendMessage: (msg, reply) => {
+                sent.push(msg);
+                if (!reply) return;
+                reply(
+                    msg.type === "AUTISTMASK_GET_APPROVAL"
+                        ? approvalDetails
+                        : null,
+                );
+            },
+        },
+    };
+    node("wallet-list").querySelectorAll = (selector) => {
+        if (selector !== ".btn-add-address") return [];
+        plusButton = makeElement("btn-add-address");
+        plusButton.dataset.wallet = "0";
+        return [plusButton];
+    };
+    // The explorer and price lookups these screens start fail offline, and
+    // say so; that is not under test.
+    for (const method of ["log", "warn", "error"]) {
+        jest.spyOn(console, method).mockImplementation(() => {});
+    }
+    txStatus.showError.mockClear();
+
+    state.wallets = [];
+    state.rpcUrl = "https://rpc.example.invalid";
+    state.networkId = "mainnet";
+    state.viewStack = [];
+    state.currentView = "main";
+
+    addWallet.init({
+        renderWalletList: () => {},
+        doRefreshAndRender: () => {},
+        pageClosed: new AbortController().signal,
+    });
+    confirmTx.init({});
+    approval.init({});
+    exportPrivkey.init();
+});
+
+afterEach(() => {
+    jest.restoreAllMocks();
+});
+
+// Import PHRASE on the add-wallet screen, with the stub node reporting a
+// balance at each of `fundedIndices`, and wait for the address scan.
+async function importPhrase(fundedIndices) {
+    mockNode.funded = new Set(fundedIndices.map((i) => derived(i).address));
+    await click(node("tab-mnemonic"));
+    node("wallet-mnemonic").value = PHRASE;
+    node("add-wallet-password").value = PASSWORD;
+    node("add-wallet-password-confirm").value = PASSWORD;
+    await click(node("btn-add-wallet-confirm"));
+}
+
+// The same, importing XPRV on the add-wallet screen's xprv tab.
+async function importXprv(fundedIndices) {
+    mockNode.funded = new Set(fundedIndices.map((i) => derived(i).address));
+    await click(node("tab-xprv"));
+    node("import-xprv-key").value = XPRV;
+    node("add-wallet-password").value = PASSWORD;
+    node("add-wallet-password-confirm").value = PASSWORD;
+    await click(node("btn-add-wallet-confirm"));
+}
+
+// Press the wallet's "+" button on Home.
+async function addAddress() {
+    home.render({
+        doRefreshAndRender: () => {},
+        pageClosed: new AbortController().signal,
+    });
+    await click(plusButton);
+}
+
+// The key the export screen reveals for the address at `position`.
+async function exportedKey(position) {
+    exportPrivkey.show(0, position);
+    node("export-privkey-password").value = PASSWORD;
+    await click(node("btn-export-privkey-confirm"));
+    return node("export-privkey-value").textContent;
+}
+
+// Confirm a send whose From line shows `from`, with the address at position
+// `selected` selected; resolves to the signed transaction the node was handed,
+// or undefined when none was.
+async function confirmSend(from, selected) {
+    state.selectedWallet = 0;
+    state.selectedAddress = selected;
+    confirmTx.show({
+        from,
+        to: RECIPIENT,
+        amount: "0.5",
+        token: "ETH",
+        balance: "1.0",
+    });
+    await settle();
+    node("confirm-tx-password").value = PASSWORD;
+    await click(node("btn-confirm-send"));
+    return mockNode.broadcast.pop();
+}
+
+// Send from the address at `position`, with that address selected, as the Send
+// button leaves it.
+function sendFrom(position) {
+    return confirmSend(state.wallets[0].addresses[position].address, position);
+}
+
+// A site asks the address at `position` to sign MESSAGE; resolves to the
+// response the approval window sent the background.
+async function signFor(position) {
+    const address = state.wallets[0].addresses[position].address;
+    approvalDetails = {
+        type: "sign",
+        origin: "https://dapp.example",
+        isPhishingDomain: false,
+        approvedFrom: address,
+        signParams: {
+            method: "personal_sign",
+            message: MESSAGE,
+            from: address,
+        },
+    };
+    await approval.show(1);
+    node("approve-sign-password").value = PASSWORD;
+    await click(node("btn-approve-sign"));
+    return sent.find((msg) => msg.type === "AUTISTMASK_SIGN_RESPONSE");
+}
+
+describe.each([
+    [
+        "an import whose scan passed over index 3",
+        async () => {
+            await importPhrase([0, 1, 2, 4]);
+        },
+        // Address 4 on Home, derived at index 4.
+        { position: 3, index: 4 },
+    ],
+    [
+        "an xprv import whose scan passed over index 3",
+        async () => {
+            await importXprv([0, 1, 2, 4]);
+        },
+        { position: 3, index: 4 },
+    ],
+    [
+        "removing the middle one of three addresses",
+        async () => {
+            await importPhrase([0]);
+            await addAddress();
+            await addAddress();
+            removeAddressFromState(state, 0, 1);
+        },
+        // Address 2 on Home after the removal, derived at index 2.
+        { position: 1, index: 2 },
+    ],
+])("after %s", (_name, setUp, { position, index }) => {
+    beforeEach(setUp);
+
+    test("the wallet lists the address derived at that index there", () => {
+        expect(state.wallets[0].addresses[position].address).toBe(
+            derived(index).address,
+        );
+    });
+
+    test("export reveals that address's key", async () => {
+        expect(await exportedKey(position)).toBe(derived(index).privateKey);
+    });
+
+    test("a send is signed by that address", async () => {
+        const signed = await sendFrom(position);
+        expect(Transaction.from(signed).from).toBe(derived(index).address);
+    });
+
+    test("a site's signature is made by that address", async () => {
+        const response = await signFor(position);
+        expect(verifyMessage(getBytes(MESSAGE), response.signature)).toBe(
+            derived(index).address,
+        );
+    });
+});
+
+// The selection and the confirmation screen are saved apart, so the popup can
+// reopen onto the screen with another address selected than its From line
+// shows.
+describe("a confirmation screen whose From is not the selected address", () => {
+    beforeEach(async () => {
+        await importPhrase([0, 1]);
+    });
+
+    test("the send is signed by the From address shown", async () => {
+        const signed = await confirmSend(derived(1).address, 0);
+        expect(Transaction.from(signed).from).toBe(derived(1).address);
+    });
+
+    test("nothing is sent when the selected wallet does not hold it", async () => {
+        expect(await confirmSend(derived(5).address, 0)).toBeUndefined();
+        expect(node("confirm-tx-password-error").textContent).toBe(
+            "The selected wallet does not hold the From address above, " +
+                "so nothing was sent. Please go back and send again.",
+        );
+    });
+});
+
+describe("an address whose stored index derives a different address", () => {
+    function refusal() {
+        return (
+            "The key this wallet holds for " +
+            derived(0).address +
+            " belongs to a different address, so it was not used."
+        );
+    }
+
+    beforeEach(async () => {
+        await importPhrase([0]);
+        state.wallets[0].addresses[0].index = 1;
+    });
+
+    test("export reveals nothing and says why", async () => {
+        expect(await exportedKey(0)).toBe("");
+        expect(node("export-privkey-password-error").textContent).toBe(
+            refusal(),
+        );
+    });
+
+    test("nothing is sent", async () => {
+        expect(await sendFrom(0)).toBeUndefined();
+        expect(txStatus.showError).toHaveBeenCalledWith(
+            expect.anything(),
+            null,
+            refusal(),
+        );
+    });
+
+    test("nothing is signed", async () => {
+        const response = await signFor(0);
+        expect(response.signature).toBeUndefined();
+        expect(response.error).toBe(refusal());
+    });
+});

tests/approvalNonce.test.js

@@ -136,7 +136,9 @@ async function openTxApproval(approvedTx) {
             xpub: "xpub-wallet-1",
             encryptedSecret: "encrypted-secret-1",
             nextIndex: 1,
-            addresses: [{ address: FROM, balance: "0", tokenBalances: [] }],
+            addresses: [
+                { address: FROM, index: 0, balance: "0", tokenBalances: [] },
+            ],
         },
     ];
     approval.init({});

tests/approvalTx.test.js

@@ -9,7 +9,7 @@
 // requesting page or the RPC node can say turns it into an approval that
 // should never have been raised.
 
-const { Network, Wallet } = require("ethers");
+const { Network, Transaction, Wallet, toQuantity } = require("ethers");
 const {
     prepareApprovalTx,
     serializeApprovedTx,
@@ -138,6 +138,43 @@ describe("prepareApprovalTx", () => {
         expect(approved.maxFeePerGas).toBe("0x12a05f200");
     });
 
+    // `gas` is the JSON-RPC name for the gas limit and the one sites send.
+    // The node would estimate 21000; the site's 200000 is what is shown and
+    // what is signed.
+    test("uses the gas limit a site sends as gas", async () => {
+        const approved = await prepareApprovalTx(
+            providerWith(),
+            signer.address,
+            { ...TX_PARAMS, gas: "0x30d40" },
+        );
+        expect(approved.gasLimit).toBe("0x30d40");
+        const signed = Transaction.from(
+            await signer.signTransaction({ ...approved }),
+        );
+        expect(signed.gasLimit).toBe(200000n);
+    });
+
+    test("accepts gas and gasLimit that name the same number", async () => {
+        const approved = await prepareApprovalTx(
+            providerWith(),
+            signer.address,
+            { ...TX_PARAMS, gas: "0x30d40", gasLimit: 200000 },
+        );
+        expect(approved.gasLimit).toBe("0x30d40");
+    });
+
+    test("refuses gas and gasLimit that disagree", async () => {
+        await expect(
+            prepareApprovalTx(providerWith(), signer.address, {
+                ...TX_PARAMS,
+                gas: "0x30d40",
+                gasLimit: "0x5208",
+            }),
+        ).rejects.toThrow(
+            "The site asked for two different gas limits for this transaction.",
+        );
+    });
+
     test("carries an access list the request asked for", async () => {
         const approved = await prepareApprovalTx(
             providerWith(),
@@ -212,6 +249,15 @@ describe("prepareApprovalTx", () => {
         ).rejects.toThrow(/gas limit no network this wallet supports/);
     });
 
+    test("refuses a gas limit the site sent above the ceiling", async () => {
+        await expect(
+            prepareApprovalTx(providerWith(), signer.address, {
+                ...TX_PARAMS,
+                gas: toQuantity(MAX_GAS_LIMIT + 1n),
+            }),
+        ).rejects.toThrow(/gas limit no network this wallet supports/);
+    });
+
     // The combined bound at population: a gas limit and a fee that are each
     // under their own ceiling but multiply to thousands of ETH is refused
     // before the approval window opens, so the user is never shown a

tests/approvalVerify.test.js

@@ -58,7 +58,6 @@ const TX_PARAMS = {
     to: RECIPIENT,
     value: "0x2386f26fc10000",
     data: "0xdeadbeef",
-    gas: "0x5208",
 };
 
 // The values populateTransaction() fills in when the dApp fixed none of them.
@@ -1455,7 +1454,11 @@ describe("background population to popup signing to verification", () => {
 
     // What the popup does with it: signs it as given, populating nothing.
     async function popupSigns(approvedTx) {
-        const localSigner = getSignerForAddress(walletData, 0, SIGNER_KEY);
+        const localSigner = getSignerForAddress(
+            walletData,
+            { address: signer.address },
+            SIGNER_KEY,
+        );
         return localSigner.signTransaction({ ...approvedTx });
     }
 
@@ -1550,7 +1553,11 @@ describe("background population to popup signing to verification", () => {
     // address the user has switched to.
     test("the approved from stops the popup signing with another key", async () => {
         const approvedTx = await backgroundPrepares(TX_PARAMS);
-        const otherSigner = getSignerForAddress(walletData, 0, OTHER_KEY);
+        const otherSigner = getSignerForAddress(
+            walletData,
+            { address: other.address },
+            OTHER_KEY,
+        );
         await expect(
             otherSigner.signTransaction({ ...approvedTx }),
         ).rejects.toThrow(/from address mismatch/);

tests/backgroundApproval.test.js

@@ -397,7 +397,13 @@ function loadBackground(options) {
                 rpcResult = r;
             },
         );
-        return { result: () => rpcResult };
+        return {
+            id: () =>
+                new URL(created[created.length - 1].url).searchParams.get(
+                    "approval",
+                ),
+            result: () => rpcResult,
+        };
     }
 
     // A dApp asking to connect. The origin defaults to one the persisted
@@ -1484,6 +1490,55 @@ describe("what the approval is verified against", () => {
         });
     });
 
+    // Typed data whose domain names another chain is refused on the sign
+    // screen; a signature for it that reaches the background anyway is not
+    // handed to the page (https://git.eeqj.de/sneak/AutistMask/issues/519).
+    // TYPED_DATA names mainnet.
+    async function answerTypedData(bg, pending) {
+        const { domain, types, message } = JSON.parse(TYPED_DATA);
+        delete types.EIP712Domain;
+        const signature = await signer.signTypedData(domain, types, message);
+        const answer = bg.send(
+            {
+                type: "AUTISTMASK_SIGN_RESPONSE",
+                id: pending.id(),
+                approved: true,
+                signature,
+            },
+            { url: bg.fromPopup.url },
+        );
+        await settle();
+        return { answer, signature };
+    }
+
+    test("typed data for the active chain is handed back signed", async () => {
+        const bg = loadBackground();
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer, signature } = await answerTypedData(bg, pending);
+
+        expect(answer.sendResponse).toHaveBeenCalledWith({ signature });
+        expect(pending.result()).toEqual({ result: signature });
+    });
+
+    test("typed data for another chain is refused, not handed back", async () => {
+        const bg = loadBackground();
+        bg.setNetwork(SEPOLIA);
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer } = await answerTypedData(bg, pending);
+
+        const refusal =
+            "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+        expect(answer.sendResponse).toHaveBeenCalledWith({
+            error: refusal,
+            retryable: false,
+        });
+        expect(pending.result()).toEqual({ error: { message: refusal } });
+    });
+
     test("a sign request from another address raises no approval at all", async () => {
         const bg = loadBackground();
         const pending = bg.requestSign(other.address);
@@ -1551,6 +1606,55 @@ describe("what the approval is verified against", () => {
     });
 });
 
+// eth_sign names the address first and the data second, the reverse of
+// personal_sign, and is answered as the JSON-RPC specification defines it:
+// with an EIP-191 personal message signature over the data, the same
+// signature personal_sign returns
+// (https://git.eeqj.de/sneak/AutistMask/issues/409). The signature below is
+// made by the test; that the sign screen makes the same one is tested in
+// tests/ethSign.test.js.
+describe("eth_sign", () => {
+    test("is read address first, and returns a personal message signature over the data", async () => {
+        const bg = loadBackground();
+        const page = bg.send(
+            {
+                type: "AUTISTMASK_RPC",
+                method: "eth_sign",
+                params: [signer.address, MESSAGE],
+            },
+            { origin: ORIGIN },
+        );
+        await settle();
+        const id = approvalIdIn(bg.created.map((c) => c.url));
+
+        const details = bg.send(
+            { type: "AUTISTMASK_GET_APPROVAL", id },
+            { url: bg.fromPopup.url },
+        );
+        const { signParams } = details.sendResponse.mock.calls[0][0];
+        expect(signParams).toMatchObject({
+            method: "eth_sign",
+            message: MESSAGE,
+            from: signer.address,
+        });
+        expect(signParams.dangerWarning).toBe(
+            "This site used the older eth_sign method. " +
+                "The data will be signed as a personal message.",
+        );
+
+        const signature = await signer.signMessage(
+            Buffer.from(MESSAGE.slice(2), "hex"),
+        );
+        bg.send(
+            { type: "AUTISTMASK_SIGN_RESPONSE", id, approved: true, signature },
+            { url: bg.fromPopup.url },
+        );
+        await settle();
+
+        expect(page.sendResponse).toHaveBeenCalledWith({ result: signature });
+    });
+});
+
 // The interlock must not cost the retry the approval exists to allow.
 describe("the interlock releases a failed attempt", () => {
     test("a retryable failure before the broadcast leaves the approval usable", async () => {

tests/chainSwitchGate.test.js

@@ -16,7 +16,9 @@
 //
 // The endpoint half of #308 lives in tests/networkEndpoints.test.js, which
 // covers the popup's chain switch; this file covers the background's, which
-// goes through storage rather than the shared state singleton.
+// goes through storage rather than the shared state singleton. The last block
+// covers what the background tells open tabs when the user switches the
+// network in Settings.
 
 const { networkById } = require("../src/shared/networks");
 const { makeStorageStub } = require("./support/storageStub");
@@ -225,6 +227,14 @@ function loadBackground() {
         answerPrompt,
         closePrompt,
         opened,
+        // A message to the background from `sender`, and its answer.
+        send: (msg, sender) => {
+            let reply = null;
+            messageListener(msg, sender, (r) => {
+                reply = r;
+            });
+            return reply;
+        },
         walletState: () => storage.read("autistmask"),
         chainChangedEvents: () =>
             toTabs.filter((m) => m.eventName === "chainChanged"),
@@ -390,3 +400,109 @@ describe("only the user switches the network", () => {
         expect(bg.walletState().rpcUrl).toBe(CUSTOM_RPC);
     });
 });
+
+// Switching the network in Settings tells open pages, as an approved site
+// request does (https://git.eeqj.de/sneak/AutistMask/issues/500). These drive
+// the real Settings view over the background's storage, with what it sends
+// delivered to the background from the extension's own page.
+describe("switching the network in Settings tells every open tab", () => {
+    const POPUP = { url: EXT_URL + "src/popup/index.html" };
+
+    // A stand-in for one DOM node: enough of an element for init() to set
+    // properties on it and hang listeners off it.
+    function fakeElement() {
+        return {
+            value: "",
+            checked: false,
+            textContent: "",
+            style: {},
+            dataset: {},
+            classList: { add() {}, remove() {} },
+            listeners: {},
+            addEventListener(event, handler) {
+                this.listeners[event] = handler;
+            },
+            querySelectorAll: () => [],
+        };
+    }
+
+    // Settings, opened the way the popup opens it. Returns its network
+    // selector.
+    async function openSettings(bg) {
+        const elements = {};
+        const element = (id) => (elements[id] ||= fakeElement());
+        jest.doMock("../src/popup/views/helpers", () => ({
+            $: element,
+            showView: () => {},
+            updateDebugBanner: () => {},
+            showFlash: () => {},
+            escapeHtml: (s) => s,
+            flashCopyFeedback: () => {},
+            goBack: () => {},
+            pushCurrentView: () => {},
+            onViewLeave: () => {},
+            VIEWS: [],
+        }));
+        global.chrome.runtime.sendMessage = (msg) => {
+            bg.send(msg, POPUP);
+        };
+        await require("../src/shared/state").loadState();
+        require("../src/popup/views/settings").init({
+            pageClosed: new AbortController().signal,
+        });
+        const select = element("settings-network");
+        select.value = "mainnet";
+        return select;
+    }
+
+    // The user picks `networkId` in the selector.
+    async function choose(select, networkId) {
+        select.value = networkId;
+        await select.listeners.change();
+        await settle();
+    }
+
+    afterEach(() => {
+        jest.dontMock("../src/popup/views/helpers");
+    });
+
+    test("switching to the other network sends chainChanged once, with its chain id", async () => {
+        const bg = loadBackground();
+        const select = await openSettings(bg);
+
+        await choose(select, "sepolia");
+
+        expect(bg.walletState().networkId).toBe("sepolia");
+        expect(bg.chainChangedEvents()).toEqual([
+            {
+                type: "AUTISTMASK_EVENT",
+                eventName: "chainChanged",
+                data: SEPOLIA.chainId,
+            },
+        ]);
+    });
+
+    test("choosing the network already active changes nothing and sends nothing", async () => {
+        const bg = loadBackground();
+        const select = await openSettings(bg);
+        const before = bg.walletState();
+
+        await choose(select, "mainnet");
+
+        expect(bg.walletState()).toEqual(before);
+        expect(bg.chainChangedEvents()).toEqual([]);
+    });
+
+    test("a page cannot make the background send chainChanged", async () => {
+        const bg = loadBackground();
+
+        const reply = bg.send(
+            { type: "AUTISTMASK_NETWORK_CHANGED", chainId: SEPOLIA.chainId },
+            { url: CONNECTED_ORIGIN + "/" },
+        );
+        await settle();
+
+        expect(reply).toEqual({ error: "Unauthorized sender" });
+        expect(bg.chainChangedEvents()).toEqual([]);
+    });
+});

tests/confirmTxNetworkSwitch.test.js

@@ -0,0 +1,259 @@
+// A transfer is sent only on the network its confirmation screen was drawn for
+// (https://git.eeqj.de/sneak/AutistMask/issues/524).
+//
+// Settings is reachable from the confirmation screen, and Back from it only
+// unhides the screen, still labelled for the network it was drawn for. Sign &
+// Send used to take the network at the moment of the click, so 1 SepoliaETH
+// reviewed on Sepolia went out as 1 ETH on mainnet once mainnet was chosen in
+// Settings in between.
+//
+// Driven through the real confirmation screen, signer and chain switch, with
+// only the node and the DOM stubbed. The stub node is on the network its
+// provider was built for, so a broadcast records the network it went to.
+
+"use strict";
+
+// The signed transactions the stub node was handed, with its network's chain id.
+const mockNode = { broadcast: [] };
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        constructor(url, network) {
+            this.network = network;
+        }
+        async getNetwork() {
+            return this.network;
+        }
+        async getFeeData() {
+            return {
+                maxFeePerGas: 20000000000n,
+                maxPriorityFeePerGas: 1000000000n,
+                gasPrice: 10000000000n,
+            };
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getCode() {
+            return "0x";
+        }
+        async getTransactionCount() {
+            return 1;
+        }
+        async lookupAddress() {
+            return null;
+        }
+        async broadcastTransaction(signed) {
+            mockNode.broadcast.push({ chainId: this.network.chainId, signed });
+            return { hash: "0x" + "ab".repeat(32) };
+        }
+    }
+    return { ...actual, JsonRpcProvider: StubProvider };
+});
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    debugFetch: jest.fn(async () => ({
+        ok: true,
+        status: 200,
+        json: async () => ({ items: [] }),
+    })),
+    urlOrigin: () => "",
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The wait screen polls for a receipt; these tests stop at the broadcast.
+jest.mock("../src/popup/views/txStatus", () => ({
+    showWait: jest.fn(),
+    showError: jest.fn(),
+}));
+
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+const { makeStorageStub } = require("./support/storageStub");
+global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
+
+// A stub DOM: every id resolves to a recording element.
+const elements = new Map();
+
+function makeEl(id) {
+    const handlers = new Map();
+    return {
+        id,
+        textContent: "",
+        innerHTML: "",
+        value: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add() {},
+            remove() {},
+            toggle() {},
+            contains: () => false,
+        },
+        handlers,
+        addEventListener(name, fn) {
+            handlers.set(name, fn);
+        },
+        querySelectorAll: () => [],
+        querySelector: () => null,
+        remove() {},
+        focus() {},
+    };
+}
+
+global.document = {
+    getElementById(id) {
+        if (!elements.has(id)) elements.set(id, makeEl(id));
+        return elements.get(id);
+    },
+    createElement: (tag) => makeEl(tag),
+    body: { prepend() {}, appendChild() {} },
+    addEventListener() {},
+};
+global.navigator = { clipboard: { writeText() {} } };
+
+const { BaseWallet, Transaction, Wallet } = require("ethers");
+const { encryptWithPassword } = require("../src/shared/vault");
+const { state, loadState } = require("../src/shared/state");
+const { onChainSwitch } = require("../src/shared/chainSwitch");
+const { NETWORKS } = require("../src/shared/networks");
+const txStatus = require("../src/popup/views/txStatus");
+const confirmTx = require("../src/popup/views/confirmTx");
+
+const PRIVATE_KEY = "0x" + "11".repeat(32);
+const HOLDER = new Wallet(PRIVATE_KEY).address;
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+const PASSWORD = "correct horse battery staple";
+
+function el(id) {
+    return global.document.getElementById(id);
+}
+
+let encryptedSecret;
+let signTransaction;
+
+beforeAll(async () => {
+    await loadState();
+    encryptedSecret = await encryptWithPassword(PRIVATE_KEY, PASSWORD);
+});
+
+beforeEach(() => {
+    elements.clear();
+    mockNode.broadcast = [];
+    txStatus.showWait.mockClear();
+    txStatus.showError.mockClear();
+    signTransaction = jest.spyOn(BaseWallet.prototype, "signTransaction");
+});
+
+afterEach(() => {
+    signTransaction.mockRestore();
+});
+
+// Show the confirmation screen for 1 of the native token on `networkId`, as
+// Review on the Send screen does, with its fee estimate settled.
+async function review(networkId) {
+    await onChainSwitch(networkId);
+    state.wallets = [
+        {
+            type: "key",
+            name: "Wallet 1",
+            encryptedSecret,
+            addresses: [{ address: HOLDER, balance: "5.0" }],
+        },
+    ];
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    confirmTx.init({});
+    confirmTx.show({
+        from: HOLDER,
+        to: RECIPIENT,
+        ensName: null,
+        amount: "1",
+        token: "ETH",
+        balance: "5.0",
+        tokenSymbol: null,
+        tokenBalance: null,
+        tokenDecimals: null,
+        max: false,
+    });
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+async function signAndSend() {
+    el("confirm-tx-password").value = PASSWORD;
+    await el("btn-confirm-send").handlers.get("click")();
+}
+
+test("a transfer reviewed on Sepolia and sent goes out on Sepolia", async () => {
+    await review("sepolia");
+    expect(el("confirm-type").textContent).toBe("Native SepoliaETH transfer");
+    expect(el("btn-confirm-send").disabled).toBe(false);
+    await signAndSend();
+    expect(mockNode.broadcast).toHaveLength(1);
+    expect(mockNode.broadcast[0].chainId).toBe(11155111n);
+    expect(Transaction.from(mockNode.broadcast[0].signed).chainId).toBe(
+        11155111n,
+    );
+    expect(txStatus.showWait).toHaveBeenCalledTimes(1);
+});
+
+describe.each([
+    ["sepolia", "mainnet", "SepoliaETH"],
+    ["mainnet", "sepolia", "ETH"],
+])(
+    "a transfer reviewed on %s, with %s chosen in Settings before Sign & Send",
+    (reviewedOn, switchedTo, symbol) => {
+        test("is neither signed nor sent, and the screen says why", async () => {
+            await review(reviewedOn);
+            expect(el("confirm-type").textContent).toBe(
+                "Native " + symbol + " transfer",
+            );
+            // Settings' network select, then Back, which only unhides the
+            // screen as it was drawn.
+            await onChainSwitch(switchedTo);
+            await signAndSend();
+
+            expect(signTransaction).not.toHaveBeenCalled();
+            expect(mockNode.broadcast).toEqual([]);
+            expect(txStatus.showWait).not.toHaveBeenCalled();
+            expect(txStatus.showError).not.toHaveBeenCalled();
+            expect(el("confirm-errors").style.visibility).toBe("visible");
+            expect(el("confirm-errors").innerHTML).toContain(
+                "The active network changed after this transaction was" +
+                    " reviewed, so it was not sent. Please go back and review" +
+                    " it again.",
+            );
+        });
+    },
+);
+
+// The check in the click handler tells the user; the send itself carries the
+// chain id the screen was drawn for, so a signer on another network's node
+// cannot sign it even if the network changes after that check.
+test("the send is refused by a signer on another network's node", async () => {
+    const { getProvider } = require("../src/shared/balances");
+    const signer = new Wallet(PRIVATE_KEY).connect(
+        getProvider("https://rpc.example.invalid", "mainnet"),
+    );
+    await expect(
+        confirmTx.populateVerifyAndSend(signer, {
+            token: "ETH",
+            to: RECIPIENT,
+            amount: "1",
+            chainId: NETWORKS.sepolia.chainId,
+        }),
+    ).rejects.toThrow("transaction chainId mismatch");
+    expect(signTransaction).not.toHaveBeenCalled();
+    expect(mockNode.broadcast).toEqual([]);
+});

tests/e2e/firefox/driver.js

@@ -279,12 +279,18 @@ class Driver {
 
     // Shown means shown: in the popup a view is switched by toggling a
     // "hidden" class, and an element that is present but collapsed is not
-    // the thing a test means by visible.
+    // the thing a test means by visible. Until the page's stylesheet has
+    // applied that class hides nothing and every view lays out, so the page
+    // must also have finished loading, which it does only after its
+    // stylesheet, and neither the element nor anything enclosing it may
+    // carry the class (https://git.eeqj.de/sneak/AutistMask/issues/502).
     async waitVisible(selector, timeout = DEFAULT_WAIT_MS) {
         return this.waitFor(
             "selector " + selector + " to be visible",
             `const el = document.querySelector(arguments[0]);
-             if (!el) return false;
+             if (document.readyState !== "complete" || !el) return false;
+             if (el.closest(".hidden")) return false;
+             if (getComputedStyle(el).visibility !== "visible") return false;
              const r = el.getBoundingClientRect();
              return r.width > 0 && r.height > 0;`,
             [selector],

tests/e2e/firefox/run.js

@@ -128,6 +128,18 @@ step("the popup is drawn in the monospace font it declares", async (env) => {
     );
 });
 
+// The same check as the Chrome suite's (#456), so both browsers are held to
+// the same size.
+step("the popup's text is drawn at the 14px text-sm declares", async (env) => {
+    const size = await env.driver.execute(
+        "return getComputedStyle(document.body).fontSize;",
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The recovery screen (#361): the Chrome suite's four cases, run before any
 // wallet exists for the same reason. With no wallet nothing saves on a timer,
 // so no save can write a good record over the unreadable one. The last of them

tests/e2e/harness.js

@@ -333,8 +333,33 @@ async function launch(routeOpts) {
 
 const PASSWORD = "e2e-harness-password";
 
+// Waits until the page shows `selector`, not only until it lays out. Until the
+// page's stylesheet has applied, the `hidden` class that showView() keeps on
+// every view but the current one hides nothing and every view lays out, so a
+// test could read a screen before the page's script had filled it
+// (https://git.eeqj.de/sneak/AutistMask/issues/502). So the page must also
+// have finished loading, which it does only after its stylesheet, and neither
+// the element nor anything enclosing it may carry `hidden`. Polled on a timer:
+// animation frames are not guaranteed to a window that is not in front.
 async function visible(page, selector, timeout = 15000) {
-    await page.waitForSelector(selector, { state: "visible", timeout });
+    await page
+        .waitForFunction(
+            (sel) => {
+                const el = document.querySelector(sel);
+                if (document.readyState !== "complete" || !el) return false;
+                if (el.closest(".hidden")) return false;
+                if (getComputedStyle(el).visibility !== "visible") return false;
+                const r = el.getBoundingClientRect();
+                return r.width > 0 && r.height > 0;
+            },
+            selector,
+            { polling: 50, timeout },
+        )
+        .catch((e) => {
+            throw new Error(
+                "the page did not show " + selector + ": " + e.message,
+            );
+        });
 }
 
 // An empty WebAssembly module: magic number and version header, no

tests/e2e/run.js

@@ -113,6 +113,18 @@ test("the popup is drawn in the monospace font it declares (#418)", async (env)
     );
 });
 
+// The same stylesheet sets the size on body to 75%, which would draw the
+// popup at 12px.
+test("the popup's text is drawn at the 14px text-sm declares (#456)", async (env) => {
+    const size = await env.page.evaluate(
+        () => getComputedStyle(document.body).fontSize,
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The empirical half of #182. The manifest change is only a claim about
 // what the CSP permits; this is the observation. Two things have to hold
 // together, and the run covers both: the popup realm compiles WASM (here),
@@ -4538,6 +4550,42 @@ test("a site's network switch changes nothing until the user approves it (#408)"
     );
 });
 
+// Switching the network in Settings tells the page too, as an approved site
+// request does (https://git.eeqj.de/sneak/AutistMask/issues/500). The wallet
+// goes back to mainnet the same way at the end.
+test("a network switch in Settings tells the page (#500)", async (env) => {
+    const { mainnet, sepolia } = NETWORKS;
+    const before = await storedNetwork(env.page);
+    assert(
+        before.networkId === "mainnet",
+        "this test starts on mainnet, not on " + before.networkId,
+    );
+    const eventsBefore = (await chainChangedEvents(env.dapp)).length;
+    await openSettings(env.page);
+
+    await env.page.selectOption("#settings-network", "sepolia");
+    let events = await chainChangedEvents(env.dapp, eventsBefore + 1);
+    assert(
+        events.length === eventsBefore + 1 &&
+            events[events.length - 1].data === sepolia.chainId,
+        "the page was not told of the switch to Sepolia: " +
+            JSON.stringify(events),
+    );
+
+    await env.page.selectOption("#settings-network", "mainnet");
+    events = await chainChangedEvents(env.dapp, eventsBefore + 2);
+    assert(
+        events.length === eventsBefore + 2 &&
+            events[events.length - 1].data === mainnet.chainId,
+        "the page was not told of the switch back to mainnet: " +
+            JSON.stringify(events),
+    );
+    assert(
+        isDeepStrictEqual(await storedNetwork(env.page), before),
+        "switching back did not restore the mainnet network and endpoints",
+    );
+});
+
 // The closing pass over both boundaries at once. Every message the section
 // put on either channel is re-read here and required to be free of the
 // password — and required to be there at all, method by method, so the

tests/ethSign.test.js

@@ -0,0 +1,102 @@
+// The sign screen signs an eth_sign request the way it signs personal_sign: as
+// an EIP-191 personal message over the bytes of the data
+// (https://git.eeqj.de/sneak/AutistMask/issues/409). Booted through the real
+// popup entry point as the approval window. The background's half, which reads
+// the address first and the data second and checks the signature, is tested in
+// tests/backgroundApproval.test.js.
+
+// Mocked so that no password has to be hashed: the stored secret decrypts to
+// the test key below.
+jest.mock("../src/shared/vault", () => ({
+    decryptWithPassword: jest.fn(),
+    encryptWithPassword: jest.fn(),
+}));
+
+const { Wallet, getBytes } = require("ethers");
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+} = require("./support/popupBoot");
+
+// A published test key, never used for real funds.
+const SIGNER_KEY =
+    "0x59c6995e998f97a5a0044966f0945389dc9e86dae88c7a8412f4603b6b78690d";
+const signer = new Wallet(SIGNER_KEY);
+// "Hello AutistMask", as the hex a page sends.
+const MESSAGE = "0x48656c6c6f204175746973744d61736b";
+const ORIGIN = "https://dapp.example";
+
+afterEach(cleanupPopup);
+
+test("the sign screen answers eth_sign with a personal message signature over the data", async () => {
+    const sent = [];
+    const page = await bootPopup(
+        unversionedValidProfile({
+            wallets: [
+                {
+                    type: "key",
+                    name: "Wallet 1",
+                    encryptedSecret: "encrypted-key",
+                    addresses: [
+                        {
+                            address: signer.address,
+                            balance: "0.0000",
+                            tokenBalances: [],
+                        },
+                    ],
+                },
+            ],
+            activeAddress: signer.address,
+            allowedSites: { [signer.address]: [ORIGIN] },
+        }),
+        {
+            search: "?approval=approval-1",
+            runtime: {
+                connect: () => ({ postMessage: () => {} }),
+                // Answered as the background answers: with the eth_sign
+                // approval this window was opened for, and by handing back
+                // the signature the popup sends.
+                sendMessage: (msg, reply) => {
+                    sent.push(msg);
+                    if (msg.type === "AUTISTMASK_GET_APPROVAL") {
+                        reply({
+                            type: "sign",
+                            origin: ORIGIN,
+                            isPhishingDomain: false,
+                            approvedFrom: signer.address,
+                            signParams: {
+                                method: "eth_sign",
+                                message: MESSAGE,
+                                from: signer.address,
+                            },
+                        });
+                    } else if (msg.type === "AUTISTMASK_SIGN_RESPONSE") {
+                        reply({ signature: msg.signature });
+                    } else {
+                        reply(undefined);
+                    }
+                },
+            },
+        },
+    );
+    globalThis.window.close = jest.fn();
+    const { decryptWithPassword } = require("../src/shared/vault");
+    decryptWithPassword.mockResolvedValue(SIGNER_KEY);
+
+    expect(page.visibleViews()).toEqual(["approve-sign"]);
+    page.node("approve-sign-password").value = "any password";
+    await page.click("btn-approve-sign");
+
+    expect(
+        sent.filter((msg) => msg.type === "AUTISTMASK_SIGN_RESPONSE"),
+    ).toEqual([
+        {
+            type: "AUTISTMASK_SIGN_RESPONSE",
+            id: "approval-1",
+            approved: true,
+            signature: await signer.signMessage(getBytes(MESSAGE)),
+        },
+    ]);
+    expect(globalThis.window.close).toHaveBeenCalled();
+});

tests/phishingDomains.test.js

@@ -89,6 +89,12 @@ describe("vendored blocklist", () => {
         expect(isPhishingDomain(LISTED[0].toUpperCase())).toBe(true);
     });
 
+    test("a hostname ending in a dot is the same host", () => {
+        expect(isPhishingDomain(LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain("wallet." + LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain(CLEAN[0] + ".")).toBe(false);
+    });
+
     test("returns false for an empty or missing hostname", () => {
         expect(isPhishingDomain("")).toBe(false);
         expect(isPhishingDomain(null)).toBe(false);
@@ -133,6 +139,13 @@ describe("hostnameVariants", () => {
     test("lowercases hostnames", () => {
         expect(hostnameVariants("Evil.COM")).toEqual(["evil.com"]);
     });
+
+    test("drops the trailing dot of a fully qualified hostname", () => {
+        expect(hostnameVariants("sub.evil.com.")).toEqual([
+            "sub.evil.com",
+            "evil.com",
+        ]);
+    });
 });
 
 describe("domain hashing", () => {

tests/typedDataPermit.test.js

@@ -240,6 +240,7 @@ function request(data) {
 beforeEach(() => {
     state.trackedTokens = [];
     state.wallets = [];
+    state.networkId = "mainnet";
 });
 
 describe("a token permission is warned about, naming spender and amount", () => {
@@ -532,3 +533,66 @@ describe("the sign screen refuses a mismatched primary type", () => {
         expect(node("btn-approve-sign").disabled).toBe(true);
     });
 });
+
+// EIP-712: a wallet refuses typed data whose domain names a chain other than
+// the active one, because the signature is valid on the chain it names
+// (https://git.eeqj.de/sneak/AutistMask/issues/519). The wallet is on Sepolia
+// and the site asks for a mainnet USDC Permit.
+describe("the sign screen refuses typed data for another chain", () => {
+    const REFUSAL =
+        "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+
+    function withChainId(chainId) {
+        return { ...PERMIT, domain: { ...PERMIT.domain, chainId } };
+    }
+
+    beforeEach(() => {
+        decryptWithPassword.mockClear();
+        state.networkId = "sepolia";
+    });
+
+    test("another chain shows the error, with Sign disabled", async () => {
+        await openSignScreen(PERMIT);
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+        expect(node("btn-approve-sign").disabled).toBe(true);
+    });
+
+    test("Sign clicked anyway decrypts and signs nothing", async () => {
+        const sent = await openSignScreen(PERMIT);
+        node("approve-sign-password").value = "any password";
+        await click("btn-approve-sign");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(sent.map((msg) => msg.type)).not.toContain(
+            "AUTISTMASK_SIGN_RESPONSE",
+        );
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+    });
+
+    // ethers signs 1, "1" and "0x1" as the same chain id.
+    test("the chain id is refused in each form ethers signs", () => {
+        for (const chainId of [1, "1", "0x1"]) {
+            expect(typedDataRefusal(request(withChainId(chainId)))).toBe(
+                REFUSAL,
+            );
+        }
+    });
+
+    test("a chain id that is not a number is refused", () => {
+        expect(typedDataRefusal(request(withChainId("mainnet")))).toBe(
+            "This typed data cannot be read, so it cannot be signed.",
+        );
+    });
+
+    test("the active chain leaves Sign enabled", async () => {
+        await openSignScreen(withChainId("0xaa36a7"));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+
+    test("no chain id leaves Sign enabled", async () => {
+        await openSignScreen(withChainId(undefined));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+});

tests/wallet.test.js

@@ -416,7 +416,7 @@ describe("extended key depth", () => {
         expect(() =>
             wallet.getSignerForAddress(
                 { type: "xprv" },
-                0,
+                { address: VECTOR_ADDRESSES[0], index: 0 },
                 accountXprv(VECTOR_PHRASE),
             ),
         ).toThrow(/master/i);
@@ -504,7 +504,7 @@ describe("getSignerForAddress", () => {
     test.each([0, 1, 2])("hd wallet, address index %i", (index) => {
         const signer = wallet.getSignerForAddress(
             { type: "hd" },
-            index,
+            { address: VECTOR_ADDRESSES[index], index },
             VECTOR_PHRASE,
         );
 
@@ -515,7 +515,7 @@ describe("getSignerForAddress", () => {
     test.each([0, 1, 2])("xprv wallet, address index %i", (index) => {
         const signer = wallet.getSignerForAddress(
             { type: "xprv" },
-            index,
+            { address: VECTOR_ADDRESSES[index], index },
             masterXprv(VECTOR_PHRASE),
         );
 
@@ -527,7 +527,7 @@ describe("getSignerForAddress", () => {
         for (const index of [0, 1, 2]) {
             const signer = wallet.getSignerForAddress(
                 { type: "privkey" },
-                index,
+                { address: VECTOR_ADDRESSES[1], index },
                 VECTOR_PRIVATE_KEYS[1],
             );
 
@@ -535,10 +535,54 @@ describe("getSignerForAddress", () => {
         }
     });
 
+    // https://git.eeqj.de/sneak/AutistMask/issues/510: an address whose stored
+    // index does not derive it, or a private key that is not its key.
+    test.each([
+        ["hd", { address: VECTOR_ADDRESSES[2], index: 1 }, VECTOR_PHRASE],
+        [
+            "xprv",
+            { address: VECTOR_ADDRESSES[2], index: 1 },
+            masterXprv(VECTOR_PHRASE),
+        ],
+        ["privkey", { address: VECTOR_ADDRESSES[2] }, VECTOR_PRIVATE_KEYS[1]],
+    ])(
+        "%s wallet refuses a key that is not the address's own",
+        (type, addr, secret) => {
+            expect(() =>
+                wallet.getSignerForAddress({ type }, addr, secret),
+            ).toThrow(
+                "The key this wallet holds for " +
+                    VECTOR_ADDRESSES[2] +
+                    " belongs to a different address, so it was not used.",
+            );
+        },
+    );
+
+    // An HD or xprv address record without a usable `index` is refused in a
+    // sentence, not with what ethers says about the value it was handed.
+    test.each([
+        ["hd", VECTOR_PHRASE],
+        ["xprv", masterXprv(VECTOR_PHRASE)],
+    ])("%s wallet refuses an address with no valid index", (type, secret) => {
+        for (const index of [undefined, null, -1, 1.5, "1"]) {
+            expect(() =>
+                wallet.getSignerForAddress(
+                    { type },
+                    { address: VECTOR_ADDRESSES[1], index },
+                    secret,
+                ),
+            ).toThrow(
+                "No derivation index is stored for " +
+                    VECTOR_ADDRESSES[1] +
+                    ", so its key cannot be derived.",
+            );
+        }
+    });
+
     test("the returned signer signs recoverably as the expected address", async () => {
         const signer = wallet.getSignerForAddress(
             { type: "hd" },
-            1,
+            { address: VECTOR_ADDRESSES[1], index: 1 },
             VECTOR_PHRASE,
         );
         const message = "AutistMask derivation test";

tests/walletDefects.test.js

@@ -55,7 +55,7 @@ function healthyXprvWallet(name = "Master") {
         xpub,
         nextIndex: 1,
         encryptedSecret: "irrelevant-to-these-tests",
-        addresses: [{ address: firstAddress, balance: "0.0000" }],
+        addresses: [{ address: firstAddress, index: 0, balance: "0.0000" }],
     };
 }
 
@@ -74,7 +74,11 @@ function brokenXprvWallet(name = "Imported xprv") {
         nextIndex: 1,
         encryptedSecret: "irrelevant-to-these-tests",
         addresses: [
-            { address: node.deriveChild(0).address, balance: "0.0000" },
+            {
+                address: node.deriveChild(0).address,
+                index: 0,
+                balance: "0.0000",
+            },
         ],
     };
 }
@@ -153,6 +157,18 @@ describe("the explanatory copy", () => {
         expect(all).not.toMatch(/\blost\b|\bstolen\b|\bgone\b/i);
     });
 
+    // The wallet holds the imported key but will not export it, so the copy
+    // must name every key the user may hold that reaches the addresses
+    // outside it.
+    test("it names the keys that reach the addresses outside this wallet", () => {
+        const body = defect.paragraphs.join(" ");
+
+        expect(body).toMatch(/private key export are disabled/);
+        expect(body).toMatch(
+            /with the extended private key you imported, if you kept a copy of it, or with the master extended private key or recovery phrase it came from, in software that repeats the same non-standard derivation/,
+        );
+    });
+
     test("it says the wallet is not deleted and what the user can do", () => {
         const body = defect.paragraphs.join(" ");
 
@@ -558,7 +574,7 @@ describe("no path throws an unhandled error for a defective wallet", () => {
         try {
             wallet.getSignerForAddress(
                 { type: "xprv" },
-                0,
+                brokenXprvWallet().addresses[0],
                 accountXprv(VECTOR_PHRASE),
             );
         } catch (e) {
@@ -573,7 +589,7 @@ describe("no path throws an unhandled error for a defective wallet", () => {
     test("a healthy xprv wallet signs as it always did", () => {
         const signer = wallet.getSignerForAddress(
             { type: "xprv" },
-            0,
+            healthyXprvWallet().addresses[0],
             masterXprv(VECTOR_PHRASE),
         );