fix: the swap decoder names where a WRAP_ETH pays and shows a V4 step's ETH as a maximum when the router may hold ETH (closes #665)

A `WRAP_ETH` that sets the input side and pays its WETH to anyone but
the router names that recipient on its `Moved to` line.

V4 pays a `SETTLE` of ETH from the router's own ETH, whichever payer it
names. When an earlier step may leave ETH in the router, the ETH that
the user pays a later V4 step gets lines of its own. Their
`Moved from the sender` line reads `Up to <amount>`, or
`Unknown (could not be decoded)` when the amount is not known. The
decoder never subtracts the router's ETH, so no line shows less ETH
than can leave the wallet. Without such an earlier step, the lines read
as before.

Model: opus-5-5

README.md

@@ -1265,7 +1265,9 @@ see Transaction Decoding), do not always read as a number. They can read:
   the same words. `Unlimited`, `All available (V4 open delta)` and
   `Whatever an earlier step sent to the pair (V2 already paid)` keep their
   wording. When a V2 or V3 exact-out step sets `Min. received`, that line shows
-  its `amountOut`, the exact amount it buys.
+  its `amountOut`, the exact amount it buys. When the router may hold ETH from
+  an earlier step, the `Moved from the sender` line of ETH that the user pays a
+  V4 step also reads `Up to <amount>` (see Transaction Decoding).
 - `All available (V4 open delta)`: the swap's `Amount` line, when the amount it
   shows is a V4 exact-in `amountIn` of zero. V4 reads that zero as "use the
   whole open delta", so the calldata states no quantity. Transaction Decoding
@@ -2820,9 +2822,6 @@ view would leave a wallet one click from deletion.
     - "Export Saved Data" button, and the read-only text box it fills
     - What erasing does and does not do, in bold: every wallet stored in this
       browser is deleted; nothing on chain changes and no money is moved
-    - What a wallet can be added again from: a kept copy of its recovery phrase,
-      private key or extended private key. Without that copy or the exported
-      copy, everything the wallet holds is gone forever.
     - A text input asking for `ERASE MY WALLET` to be typed back
     - Error line
     - "Erase Saved Data" button
@@ -3480,46 +3479,48 @@ Currently supported:
   of any amount but `OPEN_DELTA` pays that amount, and a `SETTLE` of
   `OPEN_DELTA` or a `SETTLE_ALL` pays what the step owes, as above. So a V4 step
   that swaps 400 USDT, with a `SETTLE` of 5,000 USDT paid by the user and the
-  rest taken to another address, reads `5000.0000 USDT`. A later step paid from
-  the router spends what the router holds and takes nothing, and so does a V2
-  exact-in whose `amountIn` is `ALREADY_PAID`. A later take of `Token In` is
-  added to the total while both are quantities: a V3 exact-in of 600 USDT and a
-  V2 exact-in of 400 USDT, both paid by the user, read `1000.0000 USDT`. When
-  the decoder does not know a take's amount, the total is not known and there is
-  no `Amount` line. A `PERMIT2_PERMIT` names `Token In` only when its amount,
-  `Unlimited` included, stands as the `Amount` figure in place of the total,
-  which it does only in the plain shape of Uniswap's own routes: it comes before
-  the step that sets the input side, it is the only `PERMIT2_PERMIT` in the
-  transaction and there is no `PERMIT2_PERMIT_BATCH`, its spender is the router,
-  its token is not the zero address, the router may not let it fail, no step
-  before it takes its token, a `PERMIT2_TRANSFER_FROM` of it included, or a
-  token the decoder does not know, and the decoder reads every step after it in
-  full. Permit2 then lets the router take no more of the token than that amount,
-  so the permit covers every take of it. Permit2 has no allowance of ETH, so a
-  permit on the zero address covers no take of ETH. A step before the permit
-  takes under whatever allowance the router already had, so it may take more
-  than the permit's amount, which would then read lower than what leaves the
-  user's wallet: a `PERMIT2_TRANSFER_FROM` of 2,000 USDT into the router, then a
-  permit of 600 USDT to the router and a V3 exact-in of 2,000 USDT paid from the
-  router, read `Amount 2000.0000 USDT`. A later permit or batch may raise what
-  Permit2 lets the router take, and so may a step the decoder does not read in
-  full: a command the decoder does not read (listed at the end of this section),
-  a step whose input it cannot read, in whole or in part, and a step it fails
-  on. Every other `PERMIT2_PERMIT`, before the step that sets the input side or
-  after it, leaves `Token In` and the `Amount` line as they read with no permit,
-  unless it lets a spender other than the router take `Token In` (see below): a
-  permit of 5,000 DAI to another address and then a V3 exact-in of 600 USDT read
-  `Swap USDT → USDC` with `Amount 600.0000 USDT`, and so do that exact-in and
-  then a permit of 5,000 DAI to the router. When a permit's amount stands and
-  the step that sets the input side spends a token other than the permit's, or
-  one the decoder does not know, that step's amount gets lines of its own,
-  unless it states no amount and the user pays it none of its input token. Each
-  take the total does not count gives three lines after the `Amount` line (after
-  `Token In` when there is none): one of a token other than `Token In`; one of
-  `Token In` after an amount that is not a quantity (a V4 open delta,
-  `ALREADY_PAID`, which keep their wording on the `Amount` line, or no stated
-  amount, as of a V4 exact-out step); and one whose amount the decoder does not
-  know. When there is no `Amount` line, each take the total counts gets them
+  rest taken to another address, reads `5000.0000 USDT`. V4 pays a `SETTLE` of
+  ETH from the router's own ETH, whichever payer it names. So when the router
+  may hold ETH from an earlier step (see above), the ETH that the user pays a V4
+  step gets lines of its own (see below). A later step paid from the router
+  spends what the router holds and takes nothing, and so does a V2 exact-in
+  whose `amountIn` is `ALREADY_PAID`. A later take of `Token In` is added to the
+  total while both are quantities: a V3 exact-in of 600 USDT and a V2 exact-in
+  of 400 USDT, both paid by the user, read `1000.0000 USDT`. When the decoder
+  does not know a take's amount, the total is not known and there is no `Amount`
+  line. A `PERMIT2_PERMIT` names `Token In` only when its amount, `Unlimited`
+  included, stands as the `Amount` figure in place of the total, which it does
+  only in the plain shape of Uniswap's own routes: it comes before the step that
+  sets the input side, it is the only `PERMIT2_PERMIT` in the transaction and
+  there is no `PERMIT2_PERMIT_BATCH`, its spender is the router, the router may
+  not let it fail, no step before it takes its token, a `PERMIT2_TRANSFER_FROM`
+  of it included, or a token the decoder does not know, and the decoder reads
+  every step after it in full. Permit2 then lets the router take no more of the
+  token than that amount, so the permit covers every take of it. A step before
+  the permit takes under whatever allowance the router already had, so it may
+  take more than the permit's amount, which would then read lower than what
+  leaves the user's wallet: a `PERMIT2_TRANSFER_FROM` of 2,000 USDT into the
+  router, then a permit of 600 USDT to the router and a V3 exact-in of 2,000
+  USDT paid from the router, read `Amount 2000.0000 USDT`. A later permit or
+  batch may raise what Permit2 lets the router take, and so may a step the
+  decoder does not read in full: a command the decoder does not read (listed at
+  the end of this section), a step whose input it cannot read, in whole or in
+  part, and a step it fails on. Every other `PERMIT2_PERMIT`, before the step
+  that sets the input side or after it, leaves `Token In` and the `Amount` line
+  as they read with no permit, unless it lets a spender other than the router
+  take `Token In` (see below): a permit of 5,000 DAI to another address and then
+  a V3 exact-in of 600 USDT read `Swap USDT → USDC` with `Amount 600.0000 USDT`,
+  and so do that exact-in and then a permit of 5,000 DAI to the router. When a
+  permit's amount stands and the step that sets the input side spends a token
+  other than the permit's, or one the decoder does not know, that step's amount
+  gets lines of its own, unless it states no amount and the user pays it none of
+  its input token. Each take the total does not count gives three lines after
+  the `Amount` line (after `Token In` when there is none): one of a token other
+  than `Token In`; one of `Token In` after an amount that is not a quantity (a
+  V4 open delta, `ALREADY_PAID`, which keep their wording on the `Amount` line,
+  or no stated amount, as of a V4 exact-out step); one whose amount the decoder
+  does not know; and one of ETH that the user pays a V4 step when the router may
+  hold ETH. When there is no `Amount` line, each take the total counts gets them
   too, so that every amount the decoder reads is shown: the amount the step that
   sets the input side states, when it is a quantity and the user pays that step
   (a V2 or V3 step whose `payerIsUser` is true, a V4 step the user pays some of
@@ -3541,22 +3542,26 @@ Currently supported:
   its amount, worded as the `Amount` line words one, or
   `Unknown (could not be decoded)` when the decoder does not know it;
   `Token moved`, giving the token's address as the `Token In` line does; and
-  `Moved to`, which reads `The swap step that spends it`. A token the decoder
-  does not know gives the `Moved from the sender` line alone. A step may also
-  take from the user's wallet what the decoder did not read: a V4 step whose
-  input or one of whose `SETTLE`s or `SETTLE_ALL`s it cannot read, which the
-  router still runs; a V2 or V3 exact-in or exact-out step or a
-  `PERMIT2_TRANSFER_FROM` whose input it cannot read, such as a V3 step whose
-  path is shorter than one token address or has bytes after its last hop; every
-  `PERMIT2_TRANSFER_FROM_BATCH`; every `EXECUTE_SUB_PLAN`, wherever it stands;
-  and every step it fails on. Each such step gives one `Moved from the sender`
-  line among those, reading `Unknown (could not be decoded)`. That line, or any
-  line for a token the decoder does not know, leaves no `Amount` line, whose
-  figure might be too low, and such a step before a `PERMIT2_PERMIT` keeps the
-  permit's amount from standing. Then each `PERMIT2_TRANSFER_FROM` but one into
-  the router, in step order, gives three lines: `Moved from the sender`, the
-  amount it moves, for example `1000000.0000 USDT`; `Token moved`, giving the
-  token's address as the `Token In` line does; and `Moved to`, which reads
+  `Moved to`, which reads `The swap step that spends it`. For ETH that the user
+  pays a V4 step when the router may hold ETH, `Moved from the sender` reads
+  `Up to <amount>` for a known amount. For a `WRAP_ETH` that pays its WETH to
+  anyone but the router, `Moved to` names that recipient instead: `The sender`
+  for `address(1)`, and otherwise the address. A token the decoder does not know
+  gives the `Moved from the sender` line alone. A step may also take from the
+  user's wallet what the decoder did not read: a V4 step whose input or one of
+  whose `SETTLE`s or `SETTLE_ALL`s it cannot read, which the router still runs;
+  a V2 or V3 exact-in or exact-out step or a `PERMIT2_TRANSFER_FROM` whose input
+  it cannot read, such as a V3 step whose path is shorter than one token address
+  or has bytes after its last hop; every `PERMIT2_TRANSFER_FROM_BATCH`; every
+  `EXECUTE_SUB_PLAN`, wherever it stands; and every step it fails on. Each such
+  step gives one `Moved from the sender` line among those, reading
+  `Unknown (could not be decoded)`. That line, or any line for a token the
+  decoder does not know, leaves no `Amount` line, whose figure might be too low,
+  and such a step before a `PERMIT2_PERMIT` keeps the permit's amount from
+  standing. Then each `PERMIT2_TRANSFER_FROM` but one into the router, in step
+  order, gives three lines: `Moved from the sender`, the amount it moves, for
+  example `1000000.0000 USDT`; `Token moved`, giving the token's address as the
+  `Token In` line does; and `Moved to`, which reads
   `The V2 pair the next swap spends` for a hop and `The sender` for `address(1)`
   on every router but `UniversalRouterV1`, and otherwise gives the address. A
   move into the router needs none of them, because its `Paid to` line and
@@ -3571,32 +3576,30 @@ Currently supported:
   amount stands gives none: the `Amount` line gives its amount, `Token In` its
   token, and its spender is the router. Each allowance a `PERMIT2_PERMIT_BATCH`
   grants, one for each token it names, all for its one spender, gives the same
-  three lines, in step order with those of each `PERMIT2_PERMIT`. For an
-  allowance of the zero address, `Permit2 allowance` gives the amount in base
-  units and `Allowance token` gives the zero address. A `PERMIT2_PERMIT` or
-  `PERMIT2_PERMIT_BATCH` whose input the decoder cannot read, such as one whose
-  token or spender word has a nonzero top byte, may let any spender take any
-  amount of any token: it gives one `Permit2 allowance` line alone, reading
-  `Unknown (could not be decoded)`. These lines change no `Paid to` line: a
-  permit or batch pays nobody. But code that a step runs, such as a V4 pool's
-  hook or a token's own code, can call a spender other than the router, which
-  can then take up to its allowance from the user's wallet before the
-  transaction ends. So an allowance to any spender but the router, or a permit
-  or batch the decoder cannot read, makes the minimum read `Min. paid out`, and
-  when its token is `Token In`, or the decoder does not know its token or
-  `Token In`, it leaves no `Amount` line, whose figure might be too low: a
-  permit of 5,000 USDT to another address and then a V3 exact-in of 600 USDT
-  read with no `Amount` line, and the 600 USDT gets lines of its own. A step
-  goes unread when its recipient does not decode as an address, when it is a V3
-  swap step whose path is shorter than one token address or has bytes after its
-  last hop, or when it is a command the decoder does not read: every command
-  other than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`, `PERMIT2_TRANSFER_FROM`,
-  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`,
-  `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`, `PAY_PORTION`,
-  `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`,
-  `UNWRAP_WETH` and `BALANCE_CHECK_ERC20` (`PERMIT2_TRANSFER_FROM_BATCH`,
-  `EXECUTE_SUB_PLAN` and the NFT commands among them), or a type its release
-  names no command for.
+  three lines, in step order with those of each `PERMIT2_PERMIT`. A
+  `PERMIT2_PERMIT` or `PERMIT2_PERMIT_BATCH` whose input the decoder cannot
+  read, such as one whose token or spender word has a nonzero top byte, may let
+  any spender take any amount of any token: it gives one `Permit2 allowance`
+  line alone, reading `Unknown (could not be decoded)`. These lines change no
+  `Paid to` line: a permit or batch pays nobody. But code that a step runs, such
+  as a V4 pool's hook or a token's own code, can call a spender other than the
+  router, which can then take up to its allowance from the user's wallet before
+  the transaction ends. So an allowance to any spender but the router, or a
+  permit or batch the decoder cannot read, makes the minimum read
+  `Min. paid out`, and when its token is `Token In`, or the decoder does not
+  know its token or `Token In`, it leaves no `Amount` line, whose figure might
+  be too low: a permit of 5,000 USDT to another address and then a V3 exact-in
+  of 600 USDT read with no `Amount` line, and the 600 USDT gets lines of its
+  own. A step goes unread when its recipient does not decode as an address, when
+  it is a V3 swap step whose path is shorter than one token address or has bytes
+  after its last hop, or when it is a command the decoder does not read: every
+  command other than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`,
+  `PERMIT2_TRANSFER_FROM`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`,
+  `V3_SWAP_EXACT_IN`, `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`,
+  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`,
+  `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  (`PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and the NFT commands among
+  them), or a type its release names no command for.
 
 ### Non-Goals Forever
 

src/popup/index.html

@@ -1994,11 +1994,10 @@
                         >Erasing the saved data deletes every wallet stored in
                         this browser.</strong
                     >
-                    Nothing on the blockchain changes and no money is moved. If
-                    you kept a copy of a wallet's recovery phrase, private key
-                    or extended private key, you can add that wallet again.
-                    Without that copy or the exported copy above, everything the
-                    wallet holds is gone forever.
+                    Nothing on the blockchain changes and no money is moved, but
+                    without the exported copy above, or the recovery phrase for
+                    each wallet written down, everything they hold is gone
+                    forever.
                 </p>
                 <p class="text-xs mb-1">
                     To confirm, type

src/shared/uniswap.js

@@ -1244,6 +1244,10 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // comes from the transaction's value. A step paid from the router
         // takes nothing from the sender.
         let inputPaidByUser = false;
+        // The recipient of a WRAP_ETH that set the input side, as written,
+        // when it is not the router; otherwise null. That WRAP_ETH pays its
+        // WETH there, not to a swap step (see the Moved to lines).
+        let wrapEthRecipient = null;
         // The last PERMIT2_PERMIT this decoder read before a step set the
         // input side, or null (see permitStands after the loop).
         let permit = null;
@@ -1336,15 +1340,18 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         };
 
         // What the steps take from the sender beyond the amount of the step
-        // that sets the input side, as { token, amount }, in step order.
-        // After the loop each joins the Amount line or gets lines of its own
-        // (see permitStands).
+        // that sets the input side, as { token, amount, atMost }, in step
+        // order. After the loop each joins the Amount line or gets lines of
+        // its own (see permitStands). A take with `atMost` set takes at most
+        // its amount, and always gets lines of its own.
         const userPaid = [];
         // A swap step the user pays for (`payerIsUser` true) takes `amount`
-        // of `token` from the sender. A V2 exact-in of ALREADY_PAID takes
-        // nothing.
-        const addUserPaid = (token, amount) => {
-            if (amount !== ALREADY_PAID) userPaid.push({ token, amount });
+        // of `token` from the sender, or at most that when `atMost` is set. A
+        // V2 exact-in of ALREADY_PAID takes nothing.
+        const addUserPaid = (token, amount, atMost = false) => {
+            if (amount !== ALREADY_PAID) {
+                userPaid.push({ token, amount, atMost });
+            }
         };
         // A step may take from the sender what this decoder did not read: a
         // V4 step whose input or one of whose SETTLEs or SETTLE_ALLs it
@@ -1787,6 +1794,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                                 w.amount,
                             );
                             inputPaidByUser = true;
+                            if (!isRouter(w.recipient)) {
+                                wrapEthRecipient = w.recipient;
+                            }
                         }
                         addPayee(w.recipient);
                         // CONTRACT_BALANCE wraps all the router's ETH.
@@ -1815,6 +1825,14 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 } else if (command === "V4_SWAP") {
                     const v4 = decodeV4Swap(inputs[i]);
                     const inputSetBefore = inputEstablished;
+                    // V4Router pays a SETTLE of ETH from the router's own
+                    // ETH, whichever payer it names. When the router may hold
+                    // ETH from an earlier step, that ETH may pay some of the
+                    // ETH that the user pays this step. The sender then pays
+                    // at most the step's amount.
+                    const routerMayHoldEth = heldByRouter.has(
+                        "0x0000000000000000000000000000000000000000",
+                    );
                     if (v4) {
                         // Each SETTLE paid from the router spends the amount
                         // decodeV4Swap() says it pays.
@@ -1905,7 +1923,13 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (v4) {
                         for (const p of v4.paidByUser) {
                             if (setInputHere && p === paidIn) continue;
-                            addUserPaid(p.currency, p.amount);
+                            addUserPaid(
+                                p.currency,
+                                p.amount,
+                                routerMayHoldEth &&
+                                    p.currency ===
+                                        "0x0000000000000000000000000000000000000000",
+                            );
                         }
                     }
                     if (!v4 || v4.settleUnread) {
@@ -2016,23 +2040,22 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // being of another token or coming after an amount that is not a
         // quantity (a V4 open delta, ALREADY_PAID, or none stated), gets
         // lines of its own. One whose amount is not known also leaves the
-        // total unknown, with no figure.
+        // total unknown, with no figure. A take of at most its amount (see
+        // userPaid) is never added, and gets lines of its own too.
         //
         // A PERMIT2_PERMIT names Token In only when its amount stands as the
         // Amount figure in place of the total, which it does only in the
         // plain shape of Uniswap's own routes: it comes before the step that
         // set the input side, it is the only PERMIT2_PERMIT in the
         // transaction and there is no PERMIT2_PERMIT_BATCH, its spender is
-        // the router, its token is not the zero address, the router may not
-        // let it fail, no step before it took its token or one not known (a
-        // PERMIT2_TRANSFER_FROM of its token included), and this decoder read
-        // every step after it in full (see stepsUnread). Permit2 then lets the
-        // router take no more of the token than that amount, so the permit
-        // covers every take of it. Permit2 has no allowance of ETH, so a
-        // permit on the zero address covers no take of ETH. A step before it
-        // takes under whatever allowance the router already had, so it may
-        // take more. A later permit or batch, or a later step this decoder
-        // did not read, may raise what Permit2 lets the router take.
+        // the router, the router may not let it fail, no step before it took
+        // its token or one not known (a PERMIT2_TRANSFER_FROM of its token
+        // included), and this decoder read every step after it in full (see
+        // stepsUnread). Permit2 then lets the router take no more of the token
+        // than that amount, so the permit covers every take of it. A step
+        // before it takes under whatever allowance the router already had, so
+        // it may take more. A later permit or batch, or a later step this
+        // decoder did not read, may raise what Permit2 lets the router take.
         // Every other PERMIT2_PERMIT leaves Token In and the Amount line as
         // they read with no permit, and gets lines of its own below. A step
         // that may take from the sender what this decoder did not read leaves
@@ -2049,19 +2072,21 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             stepCommands.filter((c) => c === "PERMIT2_PERMIT").length === 1 &&
             !stepCommands.includes("PERMIT2_PERMIT_BATCH") &&
             sameAddress(permit.spender, toAddress) &&
-            permit.token !== "0x0000000000000000000000000000000000000000" &&
             !permit.allowedToFail &&
             permit.beforeEveryTake &&
             !stepsUnread.some((step) => step > permit.step);
         // What the steps take that the Amount line does not give, as
-        // { token, amount }. A null token is a step this decoder did not read
-        // (see spentUnread()), or a token it does not know.
+        // { token, amount, atMost, recipient }. A null token is a step this
+        // decoder did not read (see spentUnread()), or a token it does not
+        // know. `atMost` is as in `userPaid`. Only the take of a WRAP_ETH that
+        // pays elsewhere has a recipient (see wrapEthRecipient).
         const spentFromSender = [];
         let total = null;
-        // The takes from the sender that `total` adds up, each a quantity, as
-        // { token, amount }. When there is no Amount line, each gets lines of
-        // its own (see below). The amount of a step that set the input side
-        // and is paid from the router counts in `total` but is not among them.
+        // The takes from the sender that `total` adds up, each a quantity, in
+        // the shape of `spentFromSender`. When there is no Amount line, each
+        // gets lines of its own (see below). The amount of a step that set
+        // the input side and is paid from the router counts in `total` but is
+        // not among them.
         const inTotal = [];
         // Whether the step that set the input side counts as a take from the
         // sender, which may get lines of its own. The amount it stated counts
@@ -2076,7 +2101,11 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         if (!permitStands || sameAddress(inputToken, permit.token)) {
             total = inputAmount;
             if (typeof inputAmount === "bigint" && inputPaidByUser) {
-                inTotal.push({ token: inputToken, amount: inputAmount });
+                inTotal.push({
+                    token: inputToken,
+                    amount: inputAmount,
+                    recipient: wrapEthRecipient,
+                });
             }
             if (hasFirstTake && !present(inputAmount)) {
                 firstTakeUnstated = { token: inputToken, amount: null };
@@ -2084,7 +2113,11 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         } else if (hasFirstTake) {
             // The step that set the input side spent a token other than the
             // permit's, or one not known, so its amount gets lines of its own.
-            spentFromSender.push({ token: inputToken, amount: inputAmount });
+            spentFromSender.push({
+                token: inputToken,
+                amount: inputAmount,
+                recipient: wrapEthRecipient,
+            });
         }
         if (permitStands) inputToken = permit.token;
         for (const t of userPaid) {
@@ -2092,6 +2125,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             if (ofTokenIn && permitStands) continue;
             if (
                 ofTokenIn &&
+                !t.atMost &&
                 typeof total === "bigint" &&
                 typeof t.amount === "bigint"
             ) {
@@ -2196,8 +2230,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // V2's already-paid zero, neither of which is a quantity at all (see
         // OPEN_DELTA and ALREADY_PAID), and an unbounded permit. Those two
         // tests come first — the sentinels are not bigints and cannot be
-        // compared with one.
-        const spentText = (amount, info) => {
+        // compared with one. `atMost` says the amount is a maximum (see
+        // userPaid).
+        const spentText = (amount, info, atMost = false) => {
             if (amount === OPEN_DELTA) {
                 return { raw: OPEN_DELTA_AMOUNT, display: OPEN_DELTA_AMOUNT };
             }
@@ -2210,7 +2245,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             if (amount >= MAX_UINT160) {
                 return { raw: "Unlimited", display: "Unlimited" };
             }
-            if (hasV2OrV3ExactOut) {
+            if (hasV2OrV3ExactOut || atMost) {
                 // A V2 or V3 exact-out swap spends at most this figure,
                 // whichever steps gave it (an amountInMax, the WRAP_ETH of a
                 // swap paid in ETH, a permit, or several steps' total), so it
@@ -2263,20 +2298,33 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // What steps take from the sender beyond the Amount line, in the shape
         // of the lines below for a PERMIT2_TRANSFER_FROM. An amount this
         // decoder does not know is said so, and a step it did not read gets
-        // that one line alone.
+        // that one line alone. A take with no recipient goes to the swap step
+        // that spends it. A take with a recipient goes to that recipient;
+        // `MSG_SENDER` means the sender.
         for (const s of spentFromSender) {
             details.push({
                 label: "Moved from the sender",
                 value: present(s.amount)
-                    ? spentText(s.amount, tokenInfo(s.token, sources)).display
+                    ? spentText(s.amount, tokenInfo(s.token, sources), s.atMost)
+                          .display
                     : UNDECODED_CURRENCY,
             });
             if (present(s.token)) {
                 details.push(tokenMovedLine("Token moved", s.token, sources));
-                details.push({
-                    label: "Moved to",
-                    value: "The swap step that spends it",
-                });
+                if (!present(s.recipient)) {
+                    details.push({
+                        label: "Moved to",
+                        value: "The swap step that spends it",
+                    });
+                } else if (s.recipient.toLowerCase() === MSG_SENDER) {
+                    details.push({ label: "Moved to", value: "The sender" });
+                } else {
+                    details.push({
+                        label: "Moved to",
+                        value: s.recipient,
+                        address: s.recipient,
+                    });
+                }
             }
         }
 
@@ -2318,36 +2366,15 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 });
                 continue;
             }
-            // Permit2 has no allowance of ETH. An allowance of the zero
-            // address reads as one of a token nothing knows: its amount in
-            // base units, and the zero address as its token.
-            if (p.token === "0x0000000000000000000000000000000000000000") {
-                details.push({
-                    label: "Permit2 allowance",
-                    value:
-                        p.amount >= MAX_UINT160
-                            ? "Unlimited"
-                            : unknownDecimalsAmount(p.amount),
-                });
-                details.push({
-                    label: "Allowance token",
-                    value: p.token,
-                    address: p.token,
-                    isToken: true,
-                });
-            } else {
-                details.push({
-                    label: "Permit2 allowance",
-                    value:
-                        p.amount >= MAX_UINT160
-                            ? "Unlimited"
-                            : amountText(p.amount, tokenInfo(p.token, sources))
-                                  .display,
-                });
-                details.push(
-                    tokenMovedLine("Allowance token", p.token, sources),
-                );
-            }
+            details.push({
+                label: "Permit2 allowance",
+                value:
+                    p.amount >= MAX_UINT160
+                        ? "Unlimited"
+                        : amountText(p.amount, tokenInfo(p.token, sources))
+                              .display,
+            });
+            details.push(tokenMovedLine("Allowance token", p.token, sources));
             details.push({
                 label: "Allowance spender",
                 value: p.spender,

tests/stateRecovery.test.js

@@ -23,9 +23,6 @@
 // version field, and showing those users a wipe prompt would be a worse defect
 // than the one being fixed. It is migrated in place and keeps working.
 
-const fs = require("fs");
-const path = require("path");
-
 const {
     bootPopup,
     cleanupPopup,
@@ -151,29 +148,6 @@ describe("the destructive reset on the recovery screen", () => {
     });
 });
 
-// A key or xprv wallet has no recovery phrase, so the erase warning names all
-// three backups (https://git.eeqj.de/sneak/AutistMask/issues/593). The boot
-// harness holds no static text, so this reads the markup itself.
-describe("the erase warning on the recovery screen", () => {
-    test("names the recovery phrase, the private key and the extended private key", () => {
-        const html = fs.readFileSync(
-            path.join(__dirname, "..", "src", "popup", "index.html"),
-            "utf8",
-        );
-        const start = html.indexOf('id="view-state-recovery"');
-        const end = html.indexOf('id="btn-state-recovery-reset"', start);
-        const screenText = html
-            .slice(start, end)
-            .replace(/<[^>]*>/g, " ")
-            .replace(/\s+/g, " ");
-
-        expect(screenText).toContain(
-            "If you kept a copy of a wallet's recovery phrase, private key or " +
-                "extended private key, you can add that wallet again.",
-        );
-    });
-});
-
 describe("a popup already open when the stored profile becomes unreadable", () => {
     // https://git.eeqj.de/sneak/AutistMask/issues/373. The popup used to stay
     // on the wallet list with the last good balances, and only a reopen

tests/uniswap.test.js

@@ -1428,8 +1428,8 @@ describe("uniswap decoder", () => {
         ];
 
         // execute() of these command bytes and inputs, decoded as sent by
-        // the user.
-        function decodeSteps(commands, inputs) {
+        // the user to `router`.
+        function decodeSteps(commands, inputs, router = ROUTER_ADDR) {
             const data = buildExecute(
                 solidityPacked(
                     commands.map(() => "uint8"),
@@ -1438,7 +1438,7 @@ describe("uniswap decoder", () => {
                 inputs,
                 9999999999n,
             );
-            return uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
+            return uniswap.decode(data, router, "0x1", {}, USER_ADDR);
         }
 
         // The first step: a V3 exact-in of 600 USDT for USDC, paid by the
@@ -2424,6 +2424,335 @@ describe("uniswap decoder", () => {
             expect(linesBetweenTokens(result)).toEqual(lines);
         });
 
+        // https://git.eeqj.de/sneak/AutistMask/issues/665 — a WRAP_ETH that
+        // sets the input side and pays its WETH to anyone but the router
+        // names that recipient on its Moved to line. On next each row read
+        // The swap step that spends it.
+        const ONE_ETH = 1000000000000000000n;
+        const MSG_SENDER = "0x0000000000000000000000000000000000000001";
+        // The lines of a WRAP_ETH of 1 ETH whose Moved to line reads `to`.
+        const wrapLines = (to) => [
+            ["Moved from the sender", "1.0000 ETH"],
+            ["Token moved", "ETH"],
+            ["Moved to", to],
+        ];
+        test.each([
+            {
+                kind: "a WRAP_ETH of 1 ETH to another address, then an EXECUTE_SUB_PLAN",
+                commands: [0x0b, 0x21],
+                inputs: [encodeWrapEth(OTHER_ADDR, ONE_ETH), SUB_PLAN],
+                lines: [
+                    ...wrapLines(OTHER_ADDR),
+                    ["Moved from the sender", UNDECODED],
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH to address(1), then an EXECUTE_SUB_PLAN",
+                commands: [0x0b, 0x21],
+                inputs: [encodeWrapEth(MSG_SENDER, ONE_ETH), SUB_PLAN],
+                lines: [
+                    ...wrapLines("The sender"),
+                    ["Moved from the sender", UNDECODED],
+                ],
+            },
+            {
+                kind: "a PERMIT2_PERMIT of 5,000 USDT to the router, a WRAP_ETH of 1 ETH to another address, then a V3 exact-in of 600 USDT",
+                commands: [0x0a, 0x0b, 0x00],
+                inputs: [
+                    encodePermit2(USDT_ADDR, 5000000000n, ROUTER_ADDR),
+                    encodeWrapEth(OTHER_ADDR, ONE_ETH),
+                    V3_600,
+                ],
+                lines: [["Amount", "5000.0000 USDT"], ...wrapLines(OTHER_ADDR)],
+            },
+        ])("$kind", ({ commands, inputs, lines }) => {
+            const result = decodeSteps(commands, inputs);
+            expect(linesBetweenTokens(result)).toEqual(lines);
+        });
+
+        // https://git.eeqj.de/sneak/AutistMask/issues/665 — V4Router pays a
+        // SETTLE of ETH from the router's own ETH, whichever payer it names.
+        // After an earlier step that may leave ETH in the router, the ETH that
+        // the user pays a V4 step reads as a maximum, on lines of its own.
+        // Every row reads at least the ETH that can leave the wallet. The two
+        // rows marked "reads as on next" read the same on next. On next every
+        // other row added that ETH to the Amount line, or read it as an exact
+        // amount.
+        //
+        // ADDRESS_THIS is the router on every release.
+        const ADDRESS_THIS = "0x0000000000000000000000000000000000000002";
+        const WRAP_INTO_ROUTER = encodeWrapEth(ADDRESS_THIS, ONE_ETH);
+        // UNWRAP_WETH has the layout of WRAP_ETH.
+        const UNWRAP_INTO_ROUTER = encodeWrapEth(ADDRESS_THIS, 0n);
+        // A V4 step swapping `amount` of ETH for USDC, with a SETTLE of
+        // OPEN_DELTA by the user.
+        const v4EthForUsdc = (amount) =>
+            encodeV4Swap(
+                new Uint8Array([
+                    V4_SWAP_EXACT_IN_SINGLE_ID,
+                    V4_SETTLE_ID,
+                    V4_TAKE_ALL_ID,
+                ]),
+                [
+                    encodeV4ExactInSingle(ZERO_ADDR, USDC_ADDR, amount, 1n),
+                    settle(ZERO_ADDR, 0n, true),
+                    encodeV4TakeAll(USDC_ADDR, 0n),
+                ],
+            );
+        const V4_ONE_ETH = v4EthForUsdc(ONE_ETH);
+        // A TRANSFER or PAY_PORTION of `amount` of `token` to another
+        // address.
+        const payOut = (token, amount) =>
+            coder.encode(
+                ["address", "address", "uint256"],
+                [token, OTHER_ADDR, amount],
+            );
+        // An ACROSS_V4_DEPOSIT_V3 of `amount` of ETH (`useNative` set), from
+        // the sender to the sender on chain id 8453.
+        const acrossEth = (amount) =>
+            coder.encode(
+                [
+                    "tuple(address,address,address,address,uint256,uint256,uint256,address,uint32,uint32,uint32,bytes,bool)",
+                ],
+                [
+                    [
+                        USER_ADDR,
+                        USER_ADDR,
+                        WETH_ADDR,
+                        WETH_ADDR,
+                        amount,
+                        1n,
+                        8453n,
+                        ZERO_ADDR,
+                        0,
+                        0,
+                        0,
+                        "0x",
+                        true,
+                    ],
+                ],
+            );
+        // The lines of ETH the sender pays a V4 step, of `amount`.
+        const ethLines = (amount) => [
+            ["Moved from the sender", amount],
+            ["Token moved", "ETH"],
+            ["Moved to", "The swap step that spends it"],
+        ];
+        test.each([
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, then a V4 swap of 1 ETH that the user settles, reads as on next",
+                commands: [0x0b, 0x10],
+                inputs: [WRAP_INTO_ROUTER, V4_ONE_ETH],
+                lines: [["Amount", "2.0000 ETH"]],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
+                commands: [0x0b, 0x0c, 0x10],
+                inputs: [WRAP_INTO_ROUTER, UNWRAP_INTO_ROUTER, V4_ONE_ETH],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "the same with a TRANSFER of 1 ETH to another address after the UNWRAP_WETH",
+                commands: [0x0b, 0x0c, 0x05, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    UNWRAP_INTO_ROUTER,
+                    payOut(ZERO_ADDR, ONE_ETH),
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "the same with a PAY_PORTION of 5,000 bips of WETH to another address before the UNWRAP_WETH",
+                commands: [0x0b, 0x06, 0x0c, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    payOut(WETH_ADDR, 5000n),
+                    UNWRAP_INTO_ROUTER,
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "the same with a WRAP_ETH of 1 ETH to another address after the UNWRAP_WETH",
+                commands: [0x0b, 0x0c, 0x0b, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    UNWRAP_INTO_ROUTER,
+                    encodeWrapEth(OTHER_ADDR, ONE_ETH),
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "the same on UniversalRouterV2_1_2 with an ACROSS_V4_DEPOSIT_V3 of 1 ETH after the UNWRAP_WETH",
+                router: ROUTER_V2_1_2_ADDR,
+                commands: [0x0b, 0x0c, 0x40, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    UNWRAP_INTO_ROUTER,
+                    acrossEth(ONE_ETH),
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT that the user pays, a WRAP_ETH of 1 ETH into the router, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
+                commands: [0x00, 0x0b, 0x0c, 0x10],
+                inputs: [
+                    V3_600,
+                    WRAP_INTO_ROUTER,
+                    UNWRAP_INTO_ROUTER,
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "a V3 exact-in of 600 USDT for WETH paid to the router, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
+                commands: [0x00, 0x0c, 0x10],
+                inputs: [
+                    encodeV3SwapExactIn(ADDRESS_THIS, USDT_600, 1n, [
+                        USDT_ADDR,
+                        WETH_ADDR,
+                    ]),
+                    UNWRAP_INTO_ROUTER,
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "a V4 swap of 600 USDT that takes ETH into the router, then a V4 swap of 5 ETH that the user settles",
+                commands: [0x10, 0x10],
+                inputs: [
+                    encodeV4Swap(
+                        new Uint8Array([
+                            V4_SWAP_EXACT_IN_SINGLE_ID,
+                            V4_SETTLE_ID,
+                            V4_TAKE_ID,
+                        ]),
+                        [
+                            encodeV4ExactInSingle(
+                                USDT_ADDR,
+                                ZERO_ADDR,
+                                USDT_600,
+                                1n,
+                            ),
+                            settle(USDT_ADDR, 0n, true),
+                            take(ZERO_ADDR, ADDRESS_THIS, 0n),
+                        ],
+                    ),
+                    v4EthForUsdc(5n * ONE_ETH),
+                ],
+                lines: [
+                    ["Amount", "600.0000 USDT"],
+                    ...ethLines("Up to 5.0000 ETH"),
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, an UNWRAP_WETH into the router, then a V4 exact-out paid in ETH with a SETTLE_ALL of at most 3 ETH, reads as on next",
+                commands: [0x0b, 0x0c, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    UNWRAP_INTO_ROUTER,
+                    encodeV4Swap(
+                        new Uint8Array([
+                            V4_SWAP_EXACT_OUT_SINGLE_ID,
+                            V4_SETTLE_ALL_ID,
+                            V4_TAKE_ALL_ID,
+                        ]),
+                        [
+                            encodeV4ExactOutSingle(
+                                ZERO_ADDR,
+                                USDC_ADDR,
+                                390000000n,
+                                3n * ONE_ETH,
+                            ),
+                            encodeV4SettleAll(ZERO_ADDR, 3n * ONE_ETH),
+                            encodeV4TakeAll(USDC_ADDR, 0n),
+                        ],
+                    ),
+                ],
+                lines: [
+                    ...wrapLines("The swap step that spends it"),
+                    ...ethLines(UNDECODED),
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, a V3 exact-out of at most 1 WETH paid from the router, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
+                commands: [0x0b, 0x01, 0x0c, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    encodeV3SwapExactOut(
+                        USER_ADDR,
+                        390000000n,
+                        ONE_ETH,
+                        [USDC_ADDR, WETH_ADDR],
+                        false,
+                    ),
+                    UNWRAP_INTO_ROUTER,
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "Up to 1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+            {
+                kind: "a WRAP_ETH of 1 ETH into the router, a V4 exact-out paid from the router's WETH, an UNWRAP_WETH into the router, then a V4 swap of 1 ETH that the user settles",
+                commands: [0x0b, 0x10, 0x0c, 0x10],
+                inputs: [
+                    WRAP_INTO_ROUTER,
+                    encodeV4Swap(
+                        new Uint8Array([
+                            V4_SWAP_EXACT_OUT_SINGLE_ID,
+                            V4_SETTLE_ID,
+                            V4_TAKE_ALL_ID,
+                        ]),
+                        [
+                            encodeV4ExactOutSingle(
+                                WETH_ADDR,
+                                USDC_ADDR,
+                                390000000n,
+                                ONE_ETH,
+                            ),
+                            settle(WETH_ADDR, 0n, false),
+                            encodeV4TakeAll(USDC_ADDR, 0n),
+                        ],
+                    ),
+                    UNWRAP_INTO_ROUTER,
+                    V4_ONE_ETH,
+                ],
+                lines: [
+                    ["Amount", "1.0000 ETH"],
+                    ...ethLines("Up to 1.0000 ETH"),
+                ],
+            },
+        ])("$kind", ({ router, commands, inputs, lines }) => {
+            const result = decodeSteps(commands, inputs, router);
+            expect(linesBetweenTokens(result)).toEqual(lines);
+        });
+
         // A V3_SWAP_EXACT_OUT the user pays for, of at most `amountInMax`
         // USDT for USDC.
         const v3ExactOut = (amountInMax) =>
@@ -3310,98 +3639,6 @@ describe("uniswap decoder", () => {
 
             expect(detail(result, "Amount").value).toBe("Up to 1000.0000 USDT");
         });
-
-        // https://git.eeqj.de/sneak/AutistMask/issues/660 — Permit2 has no
-        // allowance of ETH, so a permit on the zero address reads as one on a
-        // token nothing knows. On next at 53551c6 such a permit's Allowance
-        // token line read ETH. A permit of 1 wei of the zero address before a
-        // V4 step of 5 ETH made the Amount line read 0.000000000000000001 ETH.
-        describe("a permit on the zero address", () => {
-            const FIVE_ETH = 5000000000000000000n;
-            // The lines of a permit of `amount` base units of the zero
-            // address for the router.
-            const zeroAddressLines = (amount) => [
-                [
-                    "Permit2 allowance",
-                    amount + " base units (decimals unknown)",
-                ],
-                ["Allowance token", ZERO_ADDR],
-                ["Allowance spender", getAddress(ROUTER_ADDR)],
-            ];
-
-            test("a PERMIT2_PERMIT on the zero address names the address", () => {
-                const result = decodeSteps(
-                    [0x00, 0x0a],
-                    [
-                        V3_600,
-                        encodePermit2(
-                            ZERO_ADDR,
-                            1000000000000000000n,
-                            ROUTER_ADDR,
-                        ),
-                    ],
-                );
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "600.0000 USDT"],
-                    ...zeroAddressLines("1000000000000000000"),
-                ]);
-                expect(detail(result, "Allowance token").address).toBe(
-                    ZERO_ADDR,
-                );
-            });
-
-            test("a PERMIT2_PERMIT_BATCH entry on the zero address names the address", () => {
-                const result = decodeSteps(
-                    [0x03, 0x00],
-                    [
-                        encodePermit2Batch(
-                            [
-                                [USDT_ADDR, USDT_600],
-                                [ZERO_ADDR, 1000000000000000000n],
-                            ],
-                            ROUTER_ADDR,
-                        ),
-                        V3_600,
-                    ],
-                );
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "600.0000 USDT"],
-                    ...USDT_600_LINES,
-                    ...zeroAddressLines("1000000000000000000"),
-                ]);
-            });
-
-            test("a PERMIT2_PERMIT of 1 wei of the zero address, then a V4 step of 5 ETH the user settles, shows the 5 ETH", () => {
-                const result = decodeSteps(
-                    [0x0a, 0x10],
-                    [
-                        encodePermit2(ZERO_ADDR, 1n, ROUTER_ADDR),
-                        encodeV4Swap(
-                            new Uint8Array([
-                                V4_SWAP_EXACT_IN_SINGLE_ID,
-                                V4_SETTLE_ID,
-                                V4_TAKE_ALL_ID,
-                            ]),
-                            [
-                                encodeV4ExactInSingle(
-                                    ZERO_ADDR,
-                                    USDC_ADDR,
-                                    FIVE_ETH,
-                                    1n,
-                                ),
-                                settle(ZERO_ADDR, FIVE_ETH, true),
-                                encodeV4TakeAll(USDC_ADDR, 1n),
-                            ],
-                        ),
-                    ],
-                );
-                expect(detail(result, "Token In").value).toBe("ETH (native)");
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "5.0000 ETH"],
-                    ...zeroAddressLines("1"),
-                ]);
-            });
-        });
     });
 
     // https://git.eeqj.de/sneak/AutistMask/issues/359 — the output half, in