fix: the address screen shows a token just added at its fetched balance, not 0.0000 (closes #516)

A balance refresh that returns now draws the balances on AddressDetail or
AddressToken again when that screen is up, not only the wallet list. Their
transaction lists are left alone.

Every add path on AddToken and SettingsAddToken tracks a token through
trackToken(), which gives the tracked record `balanceNotFetched: true`. While
the field is set, the token's line reads `quantity unknown` instead of 0.0000.
refreshBalances() now resolves with the tracked tokens whose balance it read
at every address. The popup's refresh deletes the field from those tokens in
the stored record and leaves the rest of the stored list as it is. Removing
the token removes the field, and each network keeps its own records.

Model: opus-5-5

README.md

@@ -1493,7 +1493,9 @@ send-screen token selector, the address total and the remove-address warning
 (`isBelowOneMillionth()` in `src/shared/amountDisplay.js`). The Send and
 confirmation screens show it when its token is the one being sent. Tracked
 tokens with a zero balance are listed as well while "Show tracked tokens with
-zero balance" is on.
+zero balance" is on. While that setting is on, a token just added reads
+`quantity unknown` at an address with no entry for it, until a refresh has read
+its balance at every address (see AddToken).
 
 #### Stored state and its version
 
@@ -1677,6 +1679,13 @@ network switch (below). That popup then redraws its top screen as a reopened
 popup would. A screen that a reopened popup cannot render, such as Send, is
 replaced by Home.
 
+The popup refreshes balances every ten seconds while it is open
+(`doRefreshAndRender()` in `src/popup/index.js`). Each refresh that returns
+draws the wallet list again. When AddressDetail or AddressToken is up, the
+refresh also draws that screen's USD total and balance lines again, but not its
+transaction list. A refresh draws no other screen again, DeleteAddress and its
+balance lines included.
+
 A network switch leaves every screen on the page showing the previous network.
 The user makes it in Settings, or approves a site's request and the background
 saves it. Any other popup open meanwhile takes the switch from the stored
@@ -2233,7 +2242,15 @@ view would leave a wallet one click from deletion.
     - "Add" button
 - **Transitions**:
     - "Add" (valid contract) → tracks the token, pops the stack, and re-renders
-      **AddressDetail**
+      **AddressDetail**. Until a balance refresh on the token's network has read
+      the token's balance at every address, its line never reads `0.0000`. The
+      line reads `quantity unknown` instead, or is left out while "Show tracked
+      tokens with zero balance" is off. Where Blockscout already listed a
+      holding of the token, the line shows that holding. Until that refresh, the
+      tracked token's record carries `balanceNotFetched`, so the line still
+      reads `quantity unknown` after the popup closes and opens again. A refresh
+      that returns draws AddressDetail's balances again (see Navigation), so the
+      fetched balance shows without the screen being reopened
     - "Add" with a token already tracked, a scam-listed address, or a failed
       contract lookup → flash message, no screen change
     - "Add", then a network switch in Settings before the contract lookup
@@ -2534,7 +2551,9 @@ view would leave a wallet one click from deletion.
       add path
 - **Transitions**:
     - Any of the add paths shown, on success → adds the token and shows an
-      "Added SYMBOL" flash message (no screen change)
+      "Added SYMBOL" flash message (no screen change). Until a refresh has read
+      the token's balance at every address, its lines read as after "Add" on
+      AddToken
     - A duplicate, a scam-listed address, or a failed contract lookup → flash
       message, no screen change
     - "Add" by contract address, then a network switch in Settings before the
@@ -2820,9 +2839,6 @@ view would leave a wallet one click from deletion.
     - "Export Saved Data" button, and the read-only text box it fills
     - What erasing does and does not do, in bold: every wallet stored in this
       browser is deleted; nothing on chain changes and no money is moved
-    - What a wallet can be added again from: a kept copy of its recovery phrase,
-      private key or extended private key. Without that copy or the exported
-      copy, everything the wallet holds is gone forever.
     - A text input asking for `ERASE MY WALLET` to be typed back
     - Error line
     - "Erase Saved Data" button
@@ -3491,54 +3507,52 @@ Currently supported:
   which it does only in the plain shape of Uniswap's own routes: it comes before
   the step that sets the input side, it is the only `PERMIT2_PERMIT` in the
   transaction and there is no `PERMIT2_PERMIT_BATCH`, its spender is the router,
-  its token is not the zero address, the router may not let it fail, no step
-  before it takes its token, a `PERMIT2_TRANSFER_FROM` of it included, or a
-  token the decoder does not know, and the decoder reads every step after it in
-  full. Permit2 then lets the router take no more of the token than that amount,
-  so the permit covers every take of it. Permit2 has no allowance of ETH, so a
-  permit on the zero address covers no take of ETH. A step before the permit
-  takes under whatever allowance the router already had, so it may take more
-  than the permit's amount, which would then read lower than what leaves the
-  user's wallet: a `PERMIT2_TRANSFER_FROM` of 2,000 USDT into the router, then a
-  permit of 600 USDT to the router and a V3 exact-in of 2,000 USDT paid from the
-  router, read `Amount 2000.0000 USDT`. A later permit or batch may raise what
-  Permit2 lets the router take, and so may a step the decoder does not read in
-  full: a command the decoder does not read (listed at the end of this section),
-  a step whose input it cannot read, in whole or in part, and a step it fails
-  on. Every other `PERMIT2_PERMIT`, before the step that sets the input side or
-  after it, leaves `Token In` and the `Amount` line as they read with no permit,
-  unless it lets a spender other than the router take `Token In` (see below): a
-  permit of 5,000 DAI to another address and then a V3 exact-in of 600 USDT read
-  `Swap USDT → USDC` with `Amount 600.0000 USDT`, and so do that exact-in and
-  then a permit of 5,000 DAI to the router. When a permit's amount stands and
-  the step that sets the input side spends a token other than the permit's, or
-  one the decoder does not know, that step's amount gets lines of its own,
-  unless it states no amount and the user pays it none of its input token. Each
-  take the total does not count gives three lines after the `Amount` line (after
-  `Token In` when there is none): one of a token other than `Token In`; one of
-  `Token In` after an amount that is not a quantity (a V4 open delta,
-  `ALREADY_PAID`, which keep their wording on the `Amount` line, or no stated
-  amount, as of a V4 exact-out step); and one whose amount the decoder does not
-  know. When there is no `Amount` line, each take the total counts gets them
-  too, so that every amount the decoder reads is shown: the amount the step that
-  sets the input side states, when it is a quantity and the user pays that step
-  (a V2 or V3 step whose `payerIsUser` is true, a V4 step the user pays some of
-  its input token, or a `WRAP_ETH`, whose ETH comes from the transaction's
-  value), and each later take of `Token In` added to it. A step that sets the
-  input side and is paid from the router takes nothing from the user's wallet
-  and gets none. A `PERMIT2_PERMIT` the decoder cannot read, then V3 exact-ins
-  of 600 USDT and 400 DAI paid by the user, give lines for both amounts. When
-  the step that sets the input side states no amount, the user pays it some of
-  its input token, and there is no `Amount` line, that step gets them too
-  whenever another take's lines give a figure, or a `PERMIT2_TRANSFER_FROM` of
-  its token gives one, on the lines below or, into the router, on its `Paid to`
-  line, so that figure cannot read as all that leaves. When it states no amount
-  and the user pays it none of its input token, as when the router pays it, that
-  step takes none of that token from the user's wallet and never gets them, with
-  a permit or without. They come in step order, except that the step that sets
-  the input side comes first when it has them, followed, when there is no
-  `Amount` line, by the other takes the total counts: `Moved from the sender`,
-  its amount, worded as the `Amount` line words one, or
+  the router may not let it fail, no step before it takes its token, a
+  `PERMIT2_TRANSFER_FROM` of it included, or a token the decoder does not know,
+  and the decoder reads every step after it in full. Permit2 then lets the
+  router take no more of the token than that amount, so the permit covers every
+  take of it. A step before the permit takes under whatever allowance the router
+  already had, so it may take more than the permit's amount, which would then
+  read lower than what leaves the user's wallet: a `PERMIT2_TRANSFER_FROM` of
+  2,000 USDT into the router, then a permit of 600 USDT to the router and a V3
+  exact-in of 2,000 USDT paid from the router, read `Amount 2000.0000 USDT`. A
+  later permit or batch may raise what Permit2 lets the router take, and so may
+  a step the decoder does not read in full: a command the decoder does not read
+  (listed at the end of this section), a step whose input it cannot read, in
+  whole or in part, and a step it fails on. Every other `PERMIT2_PERMIT`, before
+  the step that sets the input side or after it, leaves `Token In` and the
+  `Amount` line as they read with no permit, unless it lets a spender other than
+  the router take `Token In` (see below): a permit of 5,000 DAI to another
+  address and then a V3 exact-in of 600 USDT read `Swap USDT → USDC` with
+  `Amount 600.0000 USDT`, and so do that exact-in and then a permit of 5,000 DAI
+  to the router. When a permit's amount stands and the step that sets the input
+  side spends a token other than the permit's, or one the decoder does not know,
+  that step's amount gets lines of its own, unless it states no amount and the
+  user pays it none of its input token. Each take the total does not count gives
+  three lines after the `Amount` line (after `Token In` when there is none): one
+  of a token other than `Token In`; one of `Token In` after an amount that is
+  not a quantity (a V4 open delta, `ALREADY_PAID`, which keep their wording on
+  the `Amount` line, or no stated amount, as of a V4 exact-out step); and one
+  whose amount the decoder does not know. When there is no `Amount` line, each
+  take the total counts gets them too, so that every amount the decoder reads is
+  shown: the amount the step that sets the input side states, when it is a
+  quantity and the user pays that step (a V2 or V3 step whose `payerIsUser` is
+  true, a V4 step the user pays some of its input token, or a `WRAP_ETH`, whose
+  ETH comes from the transaction's value), and each later take of `Token In`
+  added to it. A step that sets the input side and is paid from the router takes
+  nothing from the user's wallet and gets none. A `PERMIT2_PERMIT` the decoder
+  cannot read, then V3 exact-ins of 600 USDT and 400 DAI paid by the user, give
+  lines for both amounts. When the step that sets the input side states no
+  amount, the user pays it some of its input token, and there is no `Amount`
+  line, that step gets them too whenever another take's lines give a figure, or
+  a `PERMIT2_TRANSFER_FROM` of its token gives one, on the lines below or, into
+  the router, on its `Paid to` line, so that figure cannot read as all that
+  leaves. When it states no amount and the user pays it none of its input token,
+  as when the router pays it, that step takes none of that token from the user's
+  wallet and never gets them, with a permit or without. They come in step order,
+  except that the step that sets the input side comes first when it has them,
+  followed, when there is no `Amount` line, by the other takes the total counts:
+  `Moved from the sender`, its amount, worded as the `Amount` line words one, or
   `Unknown (could not be decoded)` when the decoder does not know it;
   `Token moved`, giving the token's address as the `Token In` line does; and
   `Moved to`, which reads `The swap step that spends it`. A token the decoder
@@ -3571,32 +3585,30 @@ Currently supported:
   amount stands gives none: the `Amount` line gives its amount, `Token In` its
   token, and its spender is the router. Each allowance a `PERMIT2_PERMIT_BATCH`
   grants, one for each token it names, all for its one spender, gives the same
-  three lines, in step order with those of each `PERMIT2_PERMIT`. For an
-  allowance of the zero address, `Permit2 allowance` gives the amount in base
-  units and `Allowance token` gives the zero address. A `PERMIT2_PERMIT` or
-  `PERMIT2_PERMIT_BATCH` whose input the decoder cannot read, such as one whose
-  token or spender word has a nonzero top byte, may let any spender take any
-  amount of any token: it gives one `Permit2 allowance` line alone, reading
-  `Unknown (could not be decoded)`. These lines change no `Paid to` line: a
-  permit or batch pays nobody. But code that a step runs, such as a V4 pool's
-  hook or a token's own code, can call a spender other than the router, which
-  can then take up to its allowance from the user's wallet before the
-  transaction ends. So an allowance to any spender but the router, or a permit
-  or batch the decoder cannot read, makes the minimum read `Min. paid out`, and
-  when its token is `Token In`, or the decoder does not know its token or
-  `Token In`, it leaves no `Amount` line, whose figure might be too low: a
-  permit of 5,000 USDT to another address and then a V3 exact-in of 600 USDT
-  read with no `Amount` line, and the 600 USDT gets lines of its own. A step
-  goes unread when its recipient does not decode as an address, when it is a V3
-  swap step whose path is shorter than one token address or has bytes after its
-  last hop, or when it is a command the decoder does not read: every command
-  other than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`, `PERMIT2_TRANSFER_FROM`,
-  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`,
-  `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`, `PAY_PORTION`,
-  `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`,
-  `UNWRAP_WETH` and `BALANCE_CHECK_ERC20` (`PERMIT2_TRANSFER_FROM_BATCH`,
-  `EXECUTE_SUB_PLAN` and the NFT commands among them), or a type its release
-  names no command for.
+  three lines, in step order with those of each `PERMIT2_PERMIT`. A
+  `PERMIT2_PERMIT` or `PERMIT2_PERMIT_BATCH` whose input the decoder cannot
+  read, such as one whose token or spender word has a nonzero top byte, may let
+  any spender take any amount of any token: it gives one `Permit2 allowance`
+  line alone, reading `Unknown (could not be decoded)`. These lines change no
+  `Paid to` line: a permit or batch pays nobody. But code that a step runs, such
+  as a V4 pool's hook or a token's own code, can call a spender other than the
+  router, which can then take up to its allowance from the user's wallet before
+  the transaction ends. So an allowance to any spender but the router, or a
+  permit or batch the decoder cannot read, makes the minimum read
+  `Min. paid out`, and when its token is `Token In`, or the decoder does not
+  know its token or `Token In`, it leaves no `Amount` line, whose figure might
+  be too low: a permit of 5,000 USDT to another address and then a V3 exact-in
+  of 600 USDT read with no `Amount` line, and the 600 USDT gets lines of its
+  own. A step goes unread when its recipient does not decode as an address, when
+  it is a V3 swap step whose path is shorter than one token address or has bytes
+  after its last hop, or when it is a command the decoder does not read: every
+  command other than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`,
+  `PERMIT2_TRANSFER_FROM`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`,
+  `V3_SWAP_EXACT_IN`, `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`,
+  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`,
+  `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  (`PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and the NFT commands among
+  them), or a type its release names no command for.
 
 ### Non-Goals Forever
 

src/popup/index.html

@@ -1994,11 +1994,10 @@
                         >Erasing the saved data deletes every wallet stored in
                         this browser.</strong
                     >
-                    Nothing on the blockchain changes and no money is moved. If
-                    you kept a copy of a wallet's recovery phrase, private key
-                    or extended private key, you can add that wallet again.
-                    Without that copy or the exported copy above, everything the
-                    wallet holds is gone forever.
+                    Nothing on the blockchain changes and no money is moved, but
+                    without the exported copy above, or the recovery phrase for
+                    each wallet written down, everything they hold is gone
+                    forever.
                 </p>
                 <p class="text-xs mb-1">
                     To confirm, type

src/popup/index.js

@@ -6,6 +6,7 @@ const {
     saveState,
     onSaveFailure,
     takeStoredNetwork,
+    clearBalanceNotFetched,
     loadState,
 } = require("../shared/state");
 const { StateUnusableError } = require("../shared/stateSchema");
@@ -88,6 +89,17 @@ let refreshTimer = null;
 // removed meanwhile is left as it is. Blockscout may have answered before the
 // user turned "Use Blockscout" off. So the save drops every token the user has
 // not tracked if the stored setting is off by then.
+//
+// The save also deletes `balanceNotFetched` from each tracked token whose
+// balance this refresh read at every address. trackToken() in
+// src/popup/views/helpers.js sets that field. The save takes the field off the
+// matching tokens of the stored record (clearBalanceNotFetched() in
+// src/shared/state.js). The rest of the stored tracked token list stays as it
+// is.
+//
+// Once the save is done, the wallet list is drawn again. So are the balances
+// on AddressDetail or AddressToken when that screen is up. No other screen is
+// drawn again, DeleteAddress and its balance lines included.
 async function doRefreshAndRender() {
     if (refreshInFlight) return;
     refreshInFlight = true;
@@ -95,7 +107,7 @@ async function doRefreshAndRender() {
         await followStoredSettings();
         const networkId = state.networkId;
         const wallets = structuredClone(state.wallets);
-        await Promise.all([
+        const [, readTokens] = await Promise.all([
             refreshPrices(),
             refreshBalances(
                 wallets,
@@ -127,10 +139,13 @@ async function doRefreshAndRender() {
             if (!stored.useBlockscout) {
                 dropUntrackedTokens(state.wallets, stored.trackedTokens);
             }
+            clearBalanceNotFetched(stored, readTokens);
             state.lastBalanceRefresh = Date.now();
             return true;
         });
         renderWalletList();
+        if (state.currentView === "address") addressDetail.renderBalances();
+        if (state.currentView === "address-token") addressToken.renderBalance();
     } catch (e) {
         // Every call site fires this and walks away — the boot below, the ten
         // second interval, and eight views through ctx — so it must never

src/popup/views/addToken.js

@@ -1,4 +1,11 @@
-const { $, showView, showFlash, escapeHtml, goBack } = require("./helpers");
+const {
+    $,
+    showView,
+    showFlash,
+    escapeHtml,
+    goBack,
+    trackToken,
+} = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");
@@ -72,7 +79,7 @@ function init(ctx) {
                 return;
             }
             log.infof("Adding token", info.symbol, contractAddr);
-            state.trackedTokens.push({
+            trackToken({
                 address: contractAddr,
                 symbol: info.symbol,
                 decimals: info.decimals,

src/popup/views/addressDetail.js

@@ -66,11 +66,27 @@ function show() {
     });
     $("address-line").dataset.full = addr.address;
     attachCopyHandlers($("address-line"));
-    const usdTotal = formatAddressTotal(getAddressValue(addr));
-    $("address-usd-total").innerHTML = escapeHtml(usdTotal) || " ";
     const ensEl = $("address-ens");
     // ENS is now shown inside renderAddressHtml, hide the separate element
     ensEl.classList.add("hidden");
+    renderBalances();
+    // Only Blockscout reports the tokens the user has not tracked.
+    $("address-tokens-note").classList.toggle("hidden", !!state.useBlockscout);
+    renderSendTokenSelect(addr);
+    $("tx-list").innerHTML =
+        '<div class="text-muted text-xs py-1">Loading...</div>';
+    showView("address");
+    loadTransactions(addr.address);
+}
+
+// The USD total and the balance list. Drawn again by each balance refresh
+// that returns while this screen is up (doRefreshAndRender() in
+// src/popup/index.js), which leaves the rest of the screen as it is.
+function renderBalances() {
+    const addr =
+        state.wallets[state.selectedWallet].addresses[state.selectedAddress];
+    const usdTotal = formatAddressTotal(getAddressValue(addr));
+    $("address-usd-total").innerHTML = escapeHtml(usdTotal) || "&nbsp;";
     $("address-balances").innerHTML = balanceLinesForAddress(
         addr,
         state.trackedTokens,
@@ -84,13 +100,6 @@ function show() {
                 ctx.showAddressToken();
             });
         });
-    // Only Blockscout reports the tokens the user has not tracked.
-    $("address-tokens-note").classList.toggle("hidden", !!state.useBlockscout);
-    renderSendTokenSelect(addr);
-    $("tx-list").innerHTML =
-        '<div class="text-muted text-xs py-1">Loading...</div>';
-    showView("address");
-    loadTransactions(addr.address);
 }
 
 let loadedTxs = [];
@@ -287,4 +296,4 @@ function init(_ctx) {
     exportPrivkey.init();
 }
 
-module.exports = { init, show };
+module.exports = { init, show, renderBalances };

src/popup/views/addressToken.js

@@ -49,37 +49,18 @@ function show() {
     const addr = wallet.addresses[state.selectedAddress];
     const ai = state.selectedAddress;
     const tokenId = state.selectedToken;
-
-    // Determine token symbol and balance
-    let symbol, amount, price;
     const knownToken = TOKEN_BY_ADDRESS.get(tokenId.toLowerCase());
-    if (tokenId === "ETH") {
-        symbol = nativeCurrency();
-        amount = parseFloat(addr.balance || "0");
-        price = getPrice("ETH");
-    } else {
-        const tb = (addr.tokenBalances || []).find(
-            (t) => t.address.toLowerCase() === tokenId.toLowerCase(),
-        );
-        symbol = resolveSymbol(
-            tokenId,
-            addr.tokenBalances,
-            state.trackedTokens,
-        );
-        // null when the scale is unknown: no quantity to show, and none to
-        // price. balanceLine() states that rather than printing 0.0000.
-        amount = tb ? unknownableAmount(tb.balance) : 0;
-        price = getPrice(symbol);
-    }
-
-    currentSymbol = symbol;
+    currentSymbol =
+        tokenId === "ETH"
+            ? nativeCurrency()
+            : resolveSymbol(tokenId, addr.tokenBalances, state.trackedTokens);
 
     $("address-token-title").textContent =
         wallet.name +
         " \u2014 Address " +
         (ai + 1) +
         " \u2014 " +
-        displaySymbol(symbol);
+        displaySymbol(currentSymbol);
 
     // Blockie
     const blockieEl = $("address-token-jazzicon");
@@ -101,13 +82,7 @@ function show() {
     $("address-token-line").dataset.full = addr.address;
     attachCopyHandlers($("address-token-line"));
 
-    // USD total for this token only
-    const usdVal = price && amount !== null ? amount * price : null;
-    const usdStr = formatUsd(usdVal);
-    $("address-token-usd-total").innerHTML = escapeHtml(usdStr) || " ";
-
-    // Single token balance line (no tokenId — not clickable here)
-    $("address-token-balance").innerHTML = balanceLine(symbol, amount, price);
+    renderBalance();
 
     // Token contract details (ERC-20 only)
     const contractInfo = $("address-token-contract-info");
@@ -169,6 +144,47 @@ function show() {
     loadTransactions(addr.address, tokenId);
 }
 
+// The USD total and the balance line of the selected token. Drawn again by
+// each balance refresh that returns while this screen is up
+// (doRefreshAndRender() in src/popup/index.js), which leaves the rest of the
+// screen as it is.
+function renderBalance() {
+    const addr =
+        state.wallets[state.selectedWallet].addresses[state.selectedAddress];
+    const tokenId = state.selectedToken;
+    let amount, price;
+    if (tokenId === "ETH") {
+        amount = parseFloat(addr.balance || "0");
+        price = getPrice("ETH");
+    } else {
+        const id = tokenId.toLowerCase();
+        const tb = (addr.tokenBalances || []).find(
+            (t) => t.address.toLowerCase() === id,
+        );
+        const tracked = state.trackedTokens.find(
+            (t) => t.address.toLowerCase() === id,
+        );
+        // null when the scale is unknown, or when no refresh has read the
+        // balance of a token just added: no quantity to show, and none to
+        // price. balanceLine() states that rather than printing 0.0000.
+        if (tb) amount = unknownableAmount(tb.balance);
+        else amount = tracked && tracked.balanceNotFetched ? null : 0;
+        price = getPrice(currentSymbol);
+    }
+
+    // USD total for this token only
+    const usdVal = price && amount !== null ? amount * price : null;
+    const usdStr = formatUsd(usdVal);
+    $("address-token-usd-total").innerHTML = escapeHtml(usdStr) || " ";
+
+    // Single token balance line (no tokenId — not clickable here)
+    $("address-token-balance").innerHTML = balanceLine(
+        currentSymbol,
+        amount,
+        price,
+    );
+}
+
 async function loadTransactions(address, tokenId) {
     try {
         const rawTxs = await fetchRecentTransactions(
@@ -348,4 +364,4 @@ function init(_ctx) {
     });
 }
 
-module.exports = { init, show };
+module.exports = { init, show, renderBalance };

src/popup/views/helpers.js

@@ -417,6 +417,15 @@ function balanceLine(symbol, amount, price, tokenId) {
     );
 }
 
+// Tracks `token` on the active network, as every add path on AddToken and
+// SettingsAddToken does. The tracked record carries `balanceNotFetched: true`
+// until a balance refresh has read the token's balance at every address
+// (doRefreshAndRender() in src/popup/index.js). Until then, an address with no
+// balance row for the token shows `quantity unknown` for it, not 0.0000.
+function trackToken(token) {
+    state.trackedTokens.push({ ...token, balanceNotFetched: true });
+}
+
 function balanceLinesForAddress(addr, trackedTokens, showZero) {
     let html = balanceLine(
         nativeCurrency(),
@@ -449,7 +458,7 @@ function balanceLinesForAddress(addr, trackedTokens, showZero) {
             if (seen.has(t.address.toLowerCase())) continue;
             html += balanceLine(
                 t.symbol,
-                0,
+                t.balanceNotFetched ? null : 0,
                 getPrice(t.symbol),
                 t.address.toLowerCase(),
             );
@@ -829,6 +838,7 @@ module.exports = {
     flashCopyFeedback,
     balanceLine,
     balanceLinesForAddress,
+    trackToken,
     addressHoldsFunds,
     keyMaterialName,
     unknownableAmount,

src/popup/views/settingsAddToken.js

@@ -1,4 +1,11 @@
-const { $, showView, showFlash, escapeHtml, goBack } = require("./helpers");
+const {
+    $,
+    showView,
+    showFlash,
+    escapeHtml,
+    goBack,
+    trackToken,
+} = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");
@@ -43,7 +50,7 @@ function renderTop10() {
                     decimals: parseInt(btn.dataset.decimals, 10),
                     name: btn.dataset.name || btn.dataset.symbol,
                 };
-                state.trackedTokens.push(token);
+                trackToken(token);
                 await saveState();
                 showFlash("Added " + token.symbol);
                 renderTop10();
@@ -110,7 +117,7 @@ function init(_ctx) {
             decimals: parseInt(opt.dataset.decimals, 10),
             name: opt.dataset.name || opt.dataset.symbol,
         };
-        state.trackedTokens.push(token);
+        trackToken(token);
         await saveState();
         showFlash("Added " + token.symbol);
         renderTop10();
@@ -156,7 +163,7 @@ function init(_ctx) {
                 return;
             }
             log.infof("Adding token", info.symbol, addr);
-            state.trackedTokens.push({
+            trackToken({
                 address: addr,
                 symbol: info.symbol,
                 decimals: info.decimals,

src/shared/balances.js

@@ -247,7 +247,11 @@ async function fetchTokenBalances(
 // it has none. The failure is logged. A balance of zero gets no entry, as a
 // zero Blockscout reports gets none: the balance lists take a tracked token's
 // zero from the tracked list. A token whose symbol the spoof rule refuses gets
-// no entry either, as in fetchTokenBalances().
+// no entry either, as in fetchTokenBalances(), and its balance is not read.
+//
+// Resolves with `rows`, the entries, and `unread`, the tracked tokens whose
+// balance was not read, as lowercased contract addresses. A token is unread
+// when the spoof rule refuses it or its balanceOf fails.
 //
 // `signal` is as for fetchTokenBalances().
 async function fetchTrackedTokenBalances(
@@ -288,12 +292,16 @@ async function fetchTrackedTokenBalances(
     const reported = explorerRows ?? previous;
 
     const rows = [];
+    const unread = trackedTokens
+        .filter((token) => !listed.includes(token))
+        .map((token) => token.address.toLowerCase());
     listed.forEach((token, i) => {
         const lower = token.address.toLowerCase();
         const entryIn = (list) =>
             list.find((row) => String(row.address).toLowerCase() === lower);
         const raw = balances[i];
         if (raw === null) {
+            unread.push(lower);
             const kept = entryIn(previous) || entryIn(explorerRows || []);
             if (kept) rows.push(kept);
             return;
@@ -314,12 +322,15 @@ async function fetchTrackedTokenBalances(
             holders: entry ? entry.holders : null,
         });
     });
-    return rows;
+    return { rows, unread };
 }
 
 // Fetch ETH balances, ENS names, and ERC-20 token balances for all addresses.
 // `trackedTokens` are the tokens tracked on the active network. `signal` is as
 // for fetchTokenBalances().
+//
+// Resolves with the lowercased contract addresses of the tracked tokens whose
+// balance it read at every address.
 async function refreshBalances(
     wallets,
     rpcUrl,
@@ -332,6 +343,8 @@ async function refreshBalances(
     const provider = getProvider(rpcUrl, networkId);
     const tracked = trackedTokens || [];
     const trackedSet = new Set(tracked.map((t) => t.address.toLowerCase()));
+    // The tracked tokens whose balance was not read at some address.
+    const unread = new Set();
     const updates = [];
 
     for (const wallet of wallets) {
@@ -406,12 +419,14 @@ async function refreshBalances(
                         signal,
                     ),
                     explorerRequest,
-                ]).then(([trackedRows, explorerRows]) => {
+                ]).then(([trackedResult, explorerRows]) => {
+                    for (const lower of trackedResult.unread) unread.add(lower);
                     const untrackedRows = (explorerRows ?? previous).filter(
                         (row) =>
                             !trackedSet.has(String(row.address).toLowerCase()),
                     );
-                    addr.tokenBalances = trackedRows.concat(untrackedRows);
+                    addr.tokenBalances =
+                        trackedResult.rows.concat(untrackedRows);
                     log.debugf(
                         "Token balances",
                         addr.address,
@@ -425,6 +440,7 @@ async function refreshBalances(
 
     await Promise.all(updates);
     log.debugf("refreshBalances done");
+    return [...trackedSet].filter((lower) => !unread.has(lower));
 }
 
 // Drops the balance of each token not in `trackedTokens` from every address.

src/shared/state.js

@@ -128,8 +128,9 @@ function currentNetwork() {
 // The persisted fields as this page held them when its last loadState()
 // finished, or when its last successful saveState() began, with any network
 // switch saved elsewhere that this page has taken since (takeStoredNetwork()).
-// saveState() diffs the live state against this to find only the fields THIS
-// page changed since.
+// `baseline` also lacks any `balanceNotFetched` field that a balance refresh has
+// deleted since (clearBalanceNotFetched()). saveState() diffs the live state
+// against this to find only the fields THIS page changed since.
 //
 // Deep-cloned, not a reference: callers mutate persisted objects and arrays
 // in place (state.wallets.push(...)), and a reference baseline would mutate
@@ -613,6 +614,27 @@ function takeStoredNetwork(stored) {
     copyChainSwitchFields(baseline, structuredClone(stored));
 }
 
+// Deletes `balanceNotFetched` from each tracked token whose lowercased
+// contract address is in `addresses`. The field goes from `stored`, from
+// `state` and from `baseline` alike. `stored` is the record a save of this
+// page has just read (doRefreshAndRender() in src/popup/index.js calls this
+// from `beforeWrite`). So the deletion is not a change this page made to its
+// tracked tokens. Unless this page has changed its tracked tokens itself, the
+// save then writes the stored list with only the field gone.
+function clearBalanceNotFetched(stored, addresses) {
+    for (const list of [
+        stored.trackedTokens,
+        rawState.trackedTokens,
+        baseline.trackedTokens,
+    ]) {
+        for (const token of list) {
+            if (addresses.includes(token.address.toLowerCase())) {
+                delete token.balanceNotFetched;
+            }
+        }
+    }
+}
+
 // Rejects with StateUnusableError for a stored record this build cannot make
 // sense of. Nothing is assigned and `loaded` stays false in that case, so a
 // caller that ignores the rejection gets StateNotLoadedError on the first
@@ -659,6 +681,7 @@ module.exports = {
     saveState,
     onSaveFailure,
     takeStoredNetwork,
+    clearBalanceNotFetched,
     loadState,
     currentAddress,
     currentNetwork,

src/shared/uniswap.js

@@ -2023,16 +2023,14 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // plain shape of Uniswap's own routes: it comes before the step that
         // set the input side, it is the only PERMIT2_PERMIT in the
         // transaction and there is no PERMIT2_PERMIT_BATCH, its spender is
-        // the router, its token is not the zero address, the router may not
-        // let it fail, no step before it took its token or one not known (a
-        // PERMIT2_TRANSFER_FROM of its token included), and this decoder read
-        // every step after it in full (see stepsUnread). Permit2 then lets the
-        // router take no more of the token than that amount, so the permit
-        // covers every take of it. Permit2 has no allowance of ETH, so a
-        // permit on the zero address covers no take of ETH. A step before it
-        // takes under whatever allowance the router already had, so it may
-        // take more. A later permit or batch, or a later step this decoder
-        // did not read, may raise what Permit2 lets the router take.
+        // the router, the router may not let it fail, no step before it took
+        // its token or one not known (a PERMIT2_TRANSFER_FROM of its token
+        // included), and this decoder read every step after it in full (see
+        // stepsUnread). Permit2 then lets the router take no more of the token
+        // than that amount, so the permit covers every take of it. A step
+        // before it takes under whatever allowance the router already had, so
+        // it may take more. A later permit or batch, or a later step this
+        // decoder did not read, may raise what Permit2 lets the router take.
         // Every other PERMIT2_PERMIT leaves Token In and the Amount line as
         // they read with no permit, and gets lines of its own below. A step
         // that may take from the sender what this decoder did not read leaves
@@ -2049,7 +2047,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             stepCommands.filter((c) => c === "PERMIT2_PERMIT").length === 1 &&
             !stepCommands.includes("PERMIT2_PERMIT_BATCH") &&
             sameAddress(permit.spender, toAddress) &&
-            permit.token !== "0x0000000000000000000000000000000000000000" &&
             !permit.allowedToFail &&
             permit.beforeEveryTake &&
             !stepsUnread.some((step) => step > permit.step);
@@ -2318,36 +2315,15 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 });
                 continue;
             }
-            // Permit2 has no allowance of ETH. An allowance of the zero
-            // address reads as one of a token nothing knows: its amount in
-            // base units, and the zero address as its token.
-            if (p.token === "0x0000000000000000000000000000000000000000") {
-                details.push({
-                    label: "Permit2 allowance",
-                    value:
-                        p.amount >= MAX_UINT160
-                            ? "Unlimited"
-                            : unknownDecimalsAmount(p.amount),
-                });
-                details.push({
-                    label: "Allowance token",
-                    value: p.token,
-                    address: p.token,
-                    isToken: true,
-                });
-            } else {
-                details.push({
-                    label: "Permit2 allowance",
-                    value:
-                        p.amount >= MAX_UINT160
-                            ? "Unlimited"
-                            : amountText(p.amount, tokenInfo(p.token, sources))
-                                  .display,
-                });
-                details.push(
-                    tokenMovedLine("Allowance token", p.token, sources),
-                );
-            }
+            details.push({
+                label: "Permit2 allowance",
+                value:
+                    p.amount >= MAX_UINT160
+                        ? "Unlimited"
+                        : amountText(p.amount, tokenInfo(p.token, sources))
+                              .display,
+            });
+            details.push(tokenMovedLine("Allowance token", p.token, sources));
             details.push({
                 label: "Allowance spender",
                 value: p.spender,

tests/addedTokenBalance.test.js

@@ -0,0 +1,441 @@
+// After "Add" on AddToken, AddressDetail lists the new token. Its line reads
+// `quantity unknown`, not 0.0000, until a balance refresh has read the token's
+// balance at every address, even if the popup closes and opens again
+// meanwhile. A token added on SettingsAddToken reads the same wherever it is
+// listed. A refresh that returns draws the balances on AddressDetail or
+// AddressToken again, so the fetched balance shows without the screen being
+// reopened (https://git.eeqj.de/sneak/AutistMask/issues/516).
+//
+// The tracked token's record carries `balanceNotFetched` until a refresh has
+// read the token's balance. Removing the token removes that record. A network
+// switch keeps each network's records apart. A refresh takes the field off the
+// stored record's tokens and keeps another page's changes to the stored list.
+//
+// Driven through the real popup over a stored profile on Ethereum Mainnet,
+// with "Show tracked tokens with zero balance" on, as it is by default.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+} = require("./support/popupBoot");
+
+// Tracked by nobody until a test adds it.
+const NEW_TOKEN = "0xBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB";
+
+// A holding of a million NEW_TOKEN, as refreshBalances() stores it.
+const MILLION = {
+    address: NEW_TOKEN,
+    name: "New Token",
+    symbol: "NEW",
+    decimals: 18,
+    balance: "1000000.0",
+    holders: 3,
+};
+
+// NEW_TOKEN as "Add" on AddToken tracks it, once a refresh has read its
+// balance.
+const NEW_TRACKED = {
+    address: NEW_TOKEN,
+    symbol: "NEW",
+    name: "New Token",
+    decimals: 18,
+};
+
+// A token that another popup page tracks.
+const OTHER_TOKEN = {
+    address: "0xCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC",
+    symbol: "OTH",
+    name: "Other Token",
+    decimals: 18,
+};
+
+afterEach(() => {
+    cleanupPopup();
+});
+
+// The popup reopened onto AddressDetail for the one address.
+function bootOnAddress(extra) {
+    return bootPopup(
+        unversionedValidProfile({
+            currentView: "address",
+            selectedWallet: 0,
+            selectedAddress: 0,
+            ...extra,
+        }),
+    );
+}
+
+// Holds the next balance refresh open. The returned function lets it finish
+// with the address's ETH balance at 2 and `tokenBalances` as its token
+// entries, having read the balance of every token tracked when it started.
+// Given null, it finishes having read no token's balance, as when every
+// balanceOf fails, and leaves the token entries as they were.
+function holdNextRefresh(page) {
+    const { refreshBalances } = require("../src/shared/balances");
+    let release;
+    refreshBalances.mockImplementationOnce(
+        async (wallets, rpcUrl, explorerUrl, trackedTokens) => {
+            const read = trackedTokens.map((t) => t.address.toLowerCase());
+            const tokenBalances = await new Promise((resolve) => {
+                release = resolve;
+            });
+            wallets[0].addresses[0].balance = "2.0";
+            if (tokenBalances === null) return [];
+            wallets[0].addresses[0].tokenBalances = tokenBalances;
+            return read;
+        },
+    );
+    return async (tokenBalances) => {
+        release(tokenBalances);
+        await page.settle();
+    };
+}
+
+// Runs the ten-second refresh to the end, finishing it as holdNextRefresh()
+// does with `tokenBalances`.
+async function refreshOnce(page, tokenBalances) {
+    const finish = holdNextRefresh(page);
+    const ticking = page.tick();
+    await page.settle();
+    await finish(tokenBalances);
+    await ticking;
+}
+
+// "+ Token", NEW_TOKEN typed in, and "Add", with the contract lookup
+// answering at once.
+async function addNewToken(page) {
+    const { lookupTokenInfo } = require("../src/shared/balances");
+    lookupTokenInfo.mockResolvedValueOnce({
+        symbol: "NEW",
+        decimals: 18,
+        name: "New Token",
+    });
+    await page.click("btn-add-token");
+    page.node("add-token-address").value = NEW_TOKEN;
+    await page.click("btn-add-token-confirm");
+}
+
+// Settings' "+ Add token", NEW_TOKEN typed in, and "Add", with the contract
+// lookup answering at once. It ends on SettingsAddToken.
+async function addOnSettingsAddToken(page) {
+    const { lookupTokenInfo } = require("../src/shared/balances");
+    lookupTokenInfo.mockResolvedValueOnce({
+        symbol: "NEW",
+        decimals: 18,
+        name: "New Token",
+    });
+    await page.click("btn-settings-add-token");
+    page.node("settings-addtoken-address").value = NEW_TOKEN;
+    await page.click("btn-settings-addtoken-manual");
+}
+
+// The "[x]" button Settings draws beside the first tracked token. The page
+// stub does not turn the markup Settings draws into elements. So the list
+// hands Settings a stand-in for that button each time it is drawn, and
+// `press()` presses the last one drawn. Call it before Settings opens.
+function firstRemoveButton(page) {
+    const button = { press: null };
+    page.node("settings-tracked-tokens").querySelectorAll = () => [
+        {
+            dataset: { idx: "0" },
+            addEventListener: (name, fn) => {
+                button.press = fn;
+            },
+        },
+    ];
+    return button;
+}
+
+// Picks `networkId` in the Settings network selector, as the user does.
+async function chooseNetwork(page, networkId) {
+    const select = page.node("settings-network");
+    select.value = networkId;
+    for (const fn of select.listeners.change) await fn();
+    await page.settle();
+}
+
+// Another popup page saves `trackedTokens` as the tracked token list. This
+// page is not told of the write.
+function anotherPageTracks(page, trackedTokens) {
+    page.storage.write("autistmask", {
+        ...page.storage.read("autistmask"),
+        trackedTokens,
+    });
+}
+
+// NEW_TOKEN's row in the balance list in element `id`, AddressDetail's unless
+// another is named, as markup.
+function newTokenRow(page, id = "address-balances") {
+    return page
+        .node(id)
+        .innerHTML.split("<div ")
+        .find((row) =>
+            row.includes('data-token="' + NEW_TOKEN.toLowerCase() + '"'),
+        );
+}
+
+// AddressDetail for the one address opened from Home, as its `[info]` button
+// does.
+async function openAddress(page) {
+    const { state } = require("../src/shared/state");
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    require("../src/popup/views/helpers").pushCurrentView();
+    require("../src/popup/views/addressDetail").show();
+    await page.settle();
+}
+
+// AddressToken for `token` opened from AddressDetail, as tapping the token's
+// row there does.
+async function openToken(page, token) {
+    const { state } = require("../src/shared/state");
+    state.selectedToken = token;
+    require("../src/popup/views/helpers").pushCurrentView();
+    require("../src/popup/views/addressToken").show();
+    await page.settle();
+}
+
+test("until the refresh Add started returns, the new token's line reads quantity unknown", async () => {
+    const page = await bootOnAddress();
+    expect(page.pageErrors).toEqual([]);
+    const finish = holdNextRefresh(page);
+
+    await addNewToken(page);
+
+    expect(page.visibleViews()).toEqual(["address"]);
+    const row = newTokenRow(page);
+    expect(row).toContain("quantity unknown");
+    expect(row).not.toContain("0.0000");
+    await finish([MILLION]);
+});
+
+test("once that refresh returns, AddressDetail shows the fetched balance without being reopened", async () => {
+    const page = await bootOnAddress();
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+    // Stands for the transactions on the screen, which only show() replaces.
+    page.node("tx-list").innerHTML = "transactions on the screen";
+
+    await finish([MILLION]);
+
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(newTokenRow(page)).toContain("1000000.0000");
+    // Only the balances are drawn again, not the transaction list.
+    expect(page.node("tx-list").innerHTML).toBe("transactions on the screen");
+});
+
+test("a refresh already running when the token is added does not count as reading its balance", async () => {
+    const page = await bootOnAddress();
+    const finishRunning = holdNextRefresh(page);
+    const ticking = page.tick();
+    await page.settle();
+
+    await addNewToken(page);
+    await finishRunning([]);
+    await ticking;
+
+    expect(newTokenRow(page)).toContain("quantity unknown");
+
+    // The next one reads the token's balance, which is zero.
+    await refreshOnce(page, []);
+
+    expect(newTokenRow(page)).toContain("0.0000");
+});
+
+test("closed and opened again before any refresh has read its balance, the new token's line still reads quantity unknown", async () => {
+    const closed = await bootOnAddress();
+    holdNextRefresh(closed);
+    await addNewToken(closed);
+    cleanupPopup();
+
+    // The refresh this boot starts reads no token's balance: the boot's stub
+    // of refreshBalances() reads none.
+    const page = await bootPopup(undefined, { storage: closed.storage });
+    expect(page.visibleViews()).toEqual(["address"]);
+    const row = newTokenRow(page);
+    expect(row).toContain("quantity unknown");
+    expect(row).not.toContain("0.0000");
+
+    await refreshOnce(page, [MILLION]);
+
+    expect(newTokenRow(page)).toContain("1000000.0000");
+});
+
+test("a refresh that could not read the new token's balance leaves its line quantity unknown", async () => {
+    const page = await bootOnAddress();
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+
+    await finish(null);
+
+    // Drawn again: the ETH balance it fetched is shown.
+    expect(page.node("address-balances").innerHTML).toContain("2.0000");
+    expect(newTokenRow(page)).toContain("quantity unknown");
+});
+
+test("AddressToken for the new token reads quantity unknown until the refresh returns, then the fetched balance", async () => {
+    const page = await bootOnAddress();
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+
+    await openToken(page, NEW_TOKEN.toLowerCase());
+
+    expect(page.visibleViews()).toEqual(["address-token"]);
+    const before = page.node("address-token-balance").innerHTML;
+    expect(before).toContain("quantity unknown");
+    expect(before).not.toContain("0.0000");
+
+    await finish([MILLION]);
+
+    expect(page.node("address-token-balance").innerHTML).toContain(
+        "1000000.0000",
+    );
+});
+
+test("a token added by contract address on SettingsAddToken reads quantity unknown until the refresh returns", async () => {
+    const page = await bootPopup(unversionedValidProfile());
+    expect(page.visibleViews()).toEqual(["main"]);
+    const finish = holdNextRefresh(page);
+
+    await page.click("btn-settings");
+    await addOnSettingsAddToken(page);
+    await page.click("btn-settings-addtoken-back");
+    await page.click("btn-settings-back");
+    expect(page.visibleViews()).toEqual(["main"]);
+    const onHome = newTokenRow(page, "wallet-list");
+    expect(onHome).toContain("quantity unknown");
+    expect(onHome).not.toContain("0.0000");
+
+    await openAddress(page);
+    const onAddress = newTokenRow(page);
+    expect(onAddress).toContain("quantity unknown");
+    expect(onAddress).not.toContain("0.0000");
+
+    await finish([MILLION]);
+
+    expect(newTokenRow(page)).toContain("1000000.0000");
+});
+
+test("a refresh that returns while AddressToken is up draws its balance again", async () => {
+    const page = await bootPopup(
+        unversionedValidProfile({
+            currentView: "address-token",
+            viewStack: ["main", "address"],
+            selectedWallet: 0,
+            selectedAddress: 0,
+            selectedToken: "ETH",
+        }),
+    );
+    expect(page.visibleViews()).toEqual(["address-token"]);
+    expect(page.node("address-token-balance").innerHTML).toContain("1.5000");
+
+    await refreshOnce(page, null);
+
+    expect(page.node("address-token-balance").innerHTML).toContain("2.0000");
+});
+
+test("a token removed before any refresh has read its balance leaves nothing stored, and adding it again tracks it once", async () => {
+    const page = await bootPopup(unversionedValidProfile());
+    const removeButton = firstRemoveButton(page);
+    const stored = () => page.storage.read("autistmask");
+
+    await page.click("btn-settings");
+    await addOnSettingsAddToken(page);
+    // Settings opened again from Home draws its list with the token in it.
+    await page.click("btn-settings-addtoken-back");
+    await page.click("btn-settings-back");
+    await page.click("btn-settings");
+    await removeButton.press();
+    await page.settle();
+
+    expect(stored().trackedTokens).toEqual([]);
+    // Nothing in the stored record names the token any more.
+    expect(JSON.stringify(stored()).toLowerCase()).not.toContain(
+        NEW_TOKEN.toLowerCase(),
+    );
+
+    await addOnSettingsAddToken(page);
+    // A second add of the same token is refused.
+    page.node("settings-addtoken-address").value = NEW_TOKEN;
+    await page.click("btn-settings-addtoken-manual");
+
+    const added = { address: NEW_TOKEN, symbol: "NEW", decimals: 18 };
+    expect(stored().trackedTokens).toEqual([
+        { ...added, name: "New Token", balanceNotFetched: true },
+    ]);
+
+    await refreshOnce(page, []);
+
+    expect(stored().trackedTokens).toEqual([{ ...added, name: "New Token" }]);
+});
+
+test("a refresh on another network leaves the new token reading quantity unknown on its own", async () => {
+    // Sepolia tracks a token at the same contract address, also just added.
+    const sepoliaToken = {
+        address: NEW_TOKEN,
+        symbol: "SEP",
+        name: "Sepolia Token",
+        decimals: 18,
+    };
+    const page = await bootOnAddress({
+        networkTrackedTokens: {
+            sepolia: [{ ...sepoliaToken, balanceNotFetched: true }],
+        },
+    });
+    const finishMainnet = holdNextRefresh(page);
+    await addNewToken(page);
+
+    await page.click("btn-settings");
+    await chooseNetwork(page, "sepolia");
+    // The refresh Add started returns after the switch and writes nothing.
+    await finishMainnet([MILLION]);
+    // Sepolia's refresh reads the balance of its own token.
+    await refreshOnce(page, []);
+
+    const stored = page.storage.read("autistmask");
+    expect(stored.trackedTokens).toEqual([sepoliaToken]);
+    expect(stored.networkTrackedTokens.mainnet[0].balanceNotFetched).toBe(true);
+
+    await chooseNetwork(page, "mainnet");
+    await page.click("btn-settings-back");
+
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(newTokenRow(page)).toContain("quantity unknown");
+
+    await refreshOnce(page, [MILLION]);
+
+    expect(newTokenRow(page)).toContain("1000000.0000");
+});
+
+test("a refresh keeps a token that another page added after this page loaded", async () => {
+    const page = await bootOnAddress();
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+    const otherAdded = { ...OTHER_TOKEN, balanceNotFetched: true };
+    anotherPageTracks(page, [
+        { ...NEW_TRACKED, balanceNotFetched: true },
+        otherAdded,
+    ]);
+
+    await finish([MILLION]);
+
+    expect(page.storage.read("autistmask").trackedTokens).toEqual([
+        NEW_TRACKED,
+        otherAdded,
+    ]);
+    expect(newTokenRow(page)).toContain("1000000.0000");
+});
+
+test("a refresh does not bring back a token that another page removed after this page loaded", async () => {
+    const page = await bootOnAddress({ trackedTokens: [OTHER_TOKEN] });
+    const finish = holdNextRefresh(page);
+    await addNewToken(page);
+    anotherPageTracks(page, [{ ...NEW_TRACKED, balanceNotFetched: true }]);
+
+    await finish([MILLION]);
+
+    expect(page.storage.read("autistmask").trackedTokens).toEqual([
+        NEW_TRACKED,
+    ]);
+});

tests/balanceRefreshNetworkSwitch.test.js

@@ -41,6 +41,7 @@ async function holdRefresh(page) {
                 holders: null,
             },
         ];
+        return [];
     });
     const ticking = page.tick();
     await page.settle();

tests/blockscoutEtherscanSettings.test.js

@@ -720,6 +720,7 @@ describe("the popup", () => {
                 tokenRow(TRACKED, "TRK"),
                 tokenRow(UNTRACKED, "TST"),
             ];
+            return [];
         });
         const ticking = page.tick();
         await page.settle();
@@ -764,6 +765,7 @@ describe("the popup", () => {
                 addr.tokenBalances = after
                     ? [tokenRow(TRACKED, "TRK"), tokenRow(UNTRACKED, "TST")]
                     : [tokenRow(TRACKED, "TRK")];
+                return [];
             });
 
             anotherPageSaves(page, { useBlockscout: after });

tests/e2e/run.js

@@ -969,7 +969,8 @@ test("a token added by its contract address is listed on the address screen (#15
     await visible(env.page, "#view-address");
 
     // No wait: the confirm renders the balance list before it shows the
-    // screen, and nothing renders the list again while the screen is up.
+    // screen. The refresh it starts draws the list again, with the row still
+    // in it.
     const row = env.page.locator(
         '#address-balances [data-token="' + STUB_TOKEN.address + '"]',
         { hasText: STUB_TOKEN.symbol },

tests/firstWalletRefresh.test.js

@@ -48,6 +48,7 @@ async function boot(stored) {
         for (const wallet of wallets) {
             for (const addr of wallet.addresses) addr.balance = chainBalance;
         }
+        return [];
     });
     return { page, refreshBalances };
 }

tests/flashLine.test.js

@@ -88,6 +88,7 @@ describe.each([
             showFlash: (msg) => flashes.push(msg),
             escapeHtml: (s) => s,
             goBack: () => {},
+            trackToken: () => {},
         }));
 
         require("../src/popup/views/" + view).init({

tests/stateRecovery.test.js

@@ -23,9 +23,6 @@
 // version field, and showing those users a wipe prompt would be a worse defect
 // than the one being fixed. It is migrated in place and keeps working.
 
-const fs = require("fs");
-const path = require("path");
-
 const {
     bootPopup,
     cleanupPopup,
@@ -151,29 +148,6 @@ describe("the destructive reset on the recovery screen", () => {
     });
 });
 
-// A key or xprv wallet has no recovery phrase, so the erase warning names all
-// three backups (https://git.eeqj.de/sneak/AutistMask/issues/593). The boot
-// harness holds no static text, so this reads the markup itself.
-describe("the erase warning on the recovery screen", () => {
-    test("names the recovery phrase, the private key and the extended private key", () => {
-        const html = fs.readFileSync(
-            path.join(__dirname, "..", "src", "popup", "index.html"),
-            "utf8",
-        );
-        const start = html.indexOf('id="view-state-recovery"');
-        const end = html.indexOf('id="btn-state-recovery-reset"', start);
-        const screenText = html
-            .slice(start, end)
-            .replace(/<[^>]*>/g, " ")
-            .replace(/\s+/g, " ");
-
-        expect(screenText).toContain(
-            "If you kept a copy of a wallet's recovery phrase, private key or " +
-                "extended private key, you can add that wallet again.",
-        );
-    });
-});
-
 describe("a popup already open when the stored profile becomes unreadable", () => {
     // https://git.eeqj.de/sneak/AutistMask/issues/373. The popup used to stay
     // on the wallet list with the last good balances, and only a reopen

tests/support/popupBoot.js

@@ -279,10 +279,11 @@ async function bootPopup(stored, options) {
         getAddressValue: () => ({ usd: null, partial: false }),
     }));
     // scanForAddresses() answers in the real one's shape, a scan that found
-    // no used address: AddWallet reads `addresses` from it.
+    // no used address: AddWallet reads `addresses` from it. refreshBalances()
+    // answers as a refresh that read no tracked token's balance.
     jest.doMock("../../src/shared/balances", () => ({
         fetchTokenBalances: jest.fn(async () => []),
-        refreshBalances: jest.fn(async () => {}),
+        refreshBalances: jest.fn(async () => []),
         dropUntrackedTokens: jest.requireActual("../../src/shared/balances")
             .dropUntrackedTokens,
         lookupTokenInfo: jest.fn(async () => null),

tests/trackedTokenBalances.test.js

@@ -307,3 +307,31 @@ test("a tracked token wearing a known symbol from another contract is not listed
     );
     expect(first.tokenBalances).toEqual([]);
 });
+
+test("the refresh resolves with each tracked token whose balance it read at every address", async () => {
+    const flaky = "0x9999999999999999999999999999999999999999";
+    holdings[TOKEN] = { [FIRST]: 2000000n, [SECOND]: 0n };
+    // balanceOf answers at FIRST and fails at SECOND.
+    holdings[flaky] = { [FIRST]: 2000000n };
+    const read = await refreshBalances(
+        [
+            {
+                addresses: [
+                    { address: FIRST, tokenBalances: [] },
+                    { address: SECOND, tokenBalances: [] },
+                ],
+            },
+        ],
+        RPC_URL,
+        EXPLORER_URL,
+        [
+            TRACKED,
+            { address: flaky, symbol: "FLK", name: "Flaky", decimals: 6 },
+            // A known symbol from another contract: its balance is not read.
+            { address: OTHER, symbol: "USDC", name: "Fake", decimals: 6 },
+        ],
+        "mainnet",
+        new AbortController().signal,
+    );
+    expect(read).toEqual([TOKEN]);
+});

tests/trackedTokensPerNetwork.test.js

@@ -159,7 +159,9 @@ test("a token added by contract address on Sepolia is tracked on Sepolia only",
         "sepolia",
         expect.anything(),
     );
-    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
+    // No refresh has read the new token's balance yet.
+    const added = { ...SEPOLIA_TOKEN, balanceNotFetched: true };
+    expect(stored().trackedTokens).toEqual([added]);
 
     await boot.click("btn-settings");
     await chooseNetwork(boot, "mainnet");
@@ -171,7 +173,7 @@ test("a token added by contract address on Sepolia is tracked on Sepolia only",
 
     await chooseNetwork(boot, "sepolia");
     expect(stored().networkId).toBe("sepolia");
-    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
+    expect(stored().trackedTokens).toEqual([added]);
     const onSepolia = boot.node("settings-tracked-tokens").innerHTML;
     expect(onSepolia).toContain("TST");
     expect(onSepolia).not.toContain("DAI");

tests/uniswap.test.js

@@ -3310,98 +3310,6 @@ describe("uniswap decoder", () => {
 
             expect(detail(result, "Amount").value).toBe("Up to 1000.0000 USDT");
         });
-
-        // https://git.eeqj.de/sneak/AutistMask/issues/660 — Permit2 has no
-        // allowance of ETH, so a permit on the zero address reads as one on a
-        // token nothing knows. On next at 53551c6 such a permit's Allowance
-        // token line read ETH. A permit of 1 wei of the zero address before a
-        // V4 step of 5 ETH made the Amount line read 0.000000000000000001 ETH.
-        describe("a permit on the zero address", () => {
-            const FIVE_ETH = 5000000000000000000n;
-            // The lines of a permit of `amount` base units of the zero
-            // address for the router.
-            const zeroAddressLines = (amount) => [
-                [
-                    "Permit2 allowance",
-                    amount + " base units (decimals unknown)",
-                ],
-                ["Allowance token", ZERO_ADDR],
-                ["Allowance spender", getAddress(ROUTER_ADDR)],
-            ];
-
-            test("a PERMIT2_PERMIT on the zero address names the address", () => {
-                const result = decodeSteps(
-                    [0x00, 0x0a],
-                    [
-                        V3_600,
-                        encodePermit2(
-                            ZERO_ADDR,
-                            1000000000000000000n,
-                            ROUTER_ADDR,
-                        ),
-                    ],
-                );
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "600.0000 USDT"],
-                    ...zeroAddressLines("1000000000000000000"),
-                ]);
-                expect(detail(result, "Allowance token").address).toBe(
-                    ZERO_ADDR,
-                );
-            });
-
-            test("a PERMIT2_PERMIT_BATCH entry on the zero address names the address", () => {
-                const result = decodeSteps(
-                    [0x03, 0x00],
-                    [
-                        encodePermit2Batch(
-                            [
-                                [USDT_ADDR, USDT_600],
-                                [ZERO_ADDR, 1000000000000000000n],
-                            ],
-                            ROUTER_ADDR,
-                        ),
-                        V3_600,
-                    ],
-                );
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "600.0000 USDT"],
-                    ...USDT_600_LINES,
-                    ...zeroAddressLines("1000000000000000000"),
-                ]);
-            });
-
-            test("a PERMIT2_PERMIT of 1 wei of the zero address, then a V4 step of 5 ETH the user settles, shows the 5 ETH", () => {
-                const result = decodeSteps(
-                    [0x0a, 0x10],
-                    [
-                        encodePermit2(ZERO_ADDR, 1n, ROUTER_ADDR),
-                        encodeV4Swap(
-                            new Uint8Array([
-                                V4_SWAP_EXACT_IN_SINGLE_ID,
-                                V4_SETTLE_ID,
-                                V4_TAKE_ALL_ID,
-                            ]),
-                            [
-                                encodeV4ExactInSingle(
-                                    ZERO_ADDR,
-                                    USDC_ADDR,
-                                    FIVE_ETH,
-                                    1n,
-                                ),
-                                settle(ZERO_ADDR, FIVE_ETH, true),
-                                encodeV4TakeAll(USDC_ADDR, 1n),
-                            ],
-                        ),
-                    ],
-                );
-                expect(detail(result, "Token In").value).toBe("ETH (native)");
-                expect(linesBetweenTokens(result)).toEqual([
-                    ["Amount", "5.0000 ETH"],
-                    ...zeroAddressLines("1"),
-                ]);
-            });
-        });
     });
 
     // https://git.eeqj.de/sneak/AutistMask/issues/359 — the output half, in