A stored allowedSites whose value was not a list rendered a working popup and then made every subsequent save fail silently, so the user operated a wallet that persisted nothing -- worse than a blank popup, which is at least visibly broken. fraudContracts and selectedToken had the same shape: a container floored by truthiness or not at all, while its entries were dereferenced. Entries are now floored as well as containers, following the idiom #311 established, and a failed save raises a persistent banner instead of vanishing into a swallowed rejection.
The per-field justifications that used to live in a hand-written header are replaced by a contract test that drives each field's hostile and falsy values through a real popup boot, so a claim about a field answers to the code rather than to prose. Its guarantee is stated narrowly and deliberately: no structural dereference on the code paths a wholly-corrupted profile takes, which is not every path a stored record takes. The paths it does not drive are named where the claim is made, and are tracked in #379.
parseInt(decimals || "18") ran before writing stored tokenBalances[].decimals, so an explorer reporting no decimals produced a fabricated 18 indistinguishable from a real one at read time. That defeated the resolve-or-refuse guarantees of #306 and #340: their refusal paths were intact but never fired, because the guess was laundered upstream of them.
An absent scale is now stored as unknown, and a holding whose scale nothing knows carries a null balance -- unknown, never zero -- with six reader sites saying so rather than printing 0.0000. The Send screen resolves the display scale rather than reading the stored one, so a bundled token whose explorer row omits decimals still sends; when the scale cannot be resolved the stored quantity is withdrawn too, so the user is told the balance is unknown rather than only that the fee failed.
Existing fabricated 18s cannot be told apart retroactively and are replaced wholesale on the next balance refresh. An explorer-sourced scale stays trusted -- only fabrication is removed; the reasoning is recorded on the issue.
Stored state had no version and no structural validation, so a corrupt blob produced a completely blank popup with no message and no recovery control, and made every dApp RPC call from every page answer a generic -32603. There was no reset or wipe control anywhere in the UI.
saveState() now stamps a schema version and loadState() validates the shape. A version it does not understand, or a wallets array it cannot parse, lands on a recovery screen that names the problem, offers the stored record verbatim for export, and offers a destructive reset behind a typed confirmation. Unversioned but valid state -- which every existing install has -- migrates in place and keeps working; it is never shown a wipe prompt. A dApp call against unusable state answers -32007, which EIP-1474 leaves unassigned, rather than -32603. networkById() refuses an unknown id loudly instead of returning mainnet, and networkId is validated so a corrupt value cannot be used as an object key.
Fields the gate does not refuse are floored by type, container and entries both: a malformed trackedTokens or tokenBalances entry is dropped rather than dereferenced. Verified by an independent sweep of 1152 corrupt blobs producing no blank popup, with the same harness showing 9 blanks against the previous revision.
Five defects, one of which destroyed every wallet, came from src/background reading and writing the module-level state singleton the MV3 worker never populates, which silently served DEFAULT_STATE. Each point fix created the next defect. The background now has its own per-call getState() and a queued read-modify-write updateState(); the singleton is unreachable from it, and an unpopulated read throws instead of serving defaults.
The prohibition is enforced by the build, not by review: build.js asserts over esbuild's own metafile that no forbidden module is an input of a background bundle, so every specifier syntax esbuild resolves is covered, and both halves of the table are checked for rot -- a stale key, a stale module, an empty list, or an unlisted entry point under src/background/ all fail the build. The ESLint rule remains as fast local feedback and reads the same shared table. Known bounds are documented where the table lives.
Also closes#320: getProvider() now requires a validated network id, so a cold worker no longer prepares a non-mainnet dApp transaction for mainnet and gets refused by the wallet's own verifier. backgroundRefresh() no longer mutates address objects across a network round trip, the broadcast path takes its endpoint and chain id from one snapshot, and eight test storage stubs now structured-clone on get as the real chrome.storage.local does.
closes#320
tokenInfo() returned decimals 18 for any token absent from the bundled list, so the swap approval line rendered a real 1000.00 of a 6-decimal token as 0.000000000001. The scale is now resolved from what the wallet already holds (bundled list, tracked tokens, explorer-reported decimals) or refused outright, matching the rule set for the ERC-20 path in #306. A refusal reuses unknownDecimalsAmount(), so it reads as "base units (decimals unknown)" with no decimal point and no symbol, and the same string propagates to rawValue so no downstream screen can render a figure the approval screen refused. No new network call on the approval path. Verified green on all three CI contexts: check, e2e-chrome, e2e-firefox.
An amount below the 4-decimal display floor now extends to its first significant digit on the approval and confirmation screens, instead of stating a real transfer, allowance or swap Min. received as 0.0000. The rule had been implemented three times; all three now share src/shared/amountDisplay.js, which holds the plain truncation and the floored variant side by side. History and balance lists keep the unfloored rule, pinned by test.
A user who forgot their password but held their recovery phrase was permanently
locked out: deletion was password-gated and re-importing the phrase was refused
as a duplicate. Their only escape was destroying extension storage through
browser internals, taking every other wallet with it.
DeleteWallet gains an "I have lost my password" route that destroys the stored
secret after the wallet's name is typed back. No password gate was added:
requiring one to discard a secret protects nothing, since an attacker who wants
destruction can uninstall the extension, and the only person it stops is the
legitimate user who lost it. The screen is excluded from RESTORABLE_VIEWS and
registers an onViewLeave cleanup.
Deletion was chosen over re-import because a key wallet is duplicate-checked by
address rather than xpub, so an xpub-only relaxation would leave that user
still wedged; because re-import makes the user retype their recovery phrase
into a live popup merely to change a password; and because it reaches no end
state that delete-then-import plus scanForAddresses() does not. The attacker
argument did not decide it — re-import clears the "no worse than the phrase
alone" bar.
All three AddWallet password hints now state the password cannot be recovered
or reset and name that mode's only backup, the xprv mode correctly claiming no
recovery phrase. deleteAddress.js no longer tells the user that deleting a
wallet asks for a password, which this change made false.
The typed confirmation collapses internal whitespace on both sides: a wallet
renamed with two spaces displays with one, so the string a user could see and
type could never match, making the confirmation untypable on the one screen
whose purpose is un-wedging a stuck user.
Measured, not reasoned, after review found the first reserve twice too large
and pushing the Import button below the fold: #btn-add-wallet-confirm bottom
628.13 -> 580.13 at 360x600, scrollHeight 636 -> 600, hint box 48px identical
across all three tabs and on re-entry. make check 40 suites / 828 tests,
test-e2e 55/55, test-e2e-firefox 8/8.
A hostile ERC-20's symbol() reached an innerHTML string unescaped, and neither
manifest declared default-src, so an attacker deploying a token with 1,000+
holders and airdropping one unit could render a full-viewport cross-origin
iframe over the wallet's own UI, on screens where the user types their
password.
escapeHtml is now a pure string replace over & < > " ' — the old version
round-tripped through textContent, which escapes neither quote, while already
being used inside data-copy="...". All 19 files in src/popup/views/ were
audited: beyond the reported symbol site, the explorer-supplied directionLabel
in all three transaction lists, wallet.name, addr.ensName, the blockie data:
URIs and two ad-hoc quote-only escapes were also unescaped. Explorer URLs now
go through one helper that percent-encodes the path segment.
Both manifests add default-src 'self', frame-src 'none', form-action 'none' and
base-uri 'none'. Three loosenings are pinned in tests/manifest.test.js and
justified in README.md: style-src 'unsafe-inline' (39 static style attributes;
Firefox implements neither style-src-attr nor 'unsafe-hashes'), img-src data:
(blockies), connect-src https: http: (user-configurable RPC).
Note frame-src 'none' blocks a frame loading, not the element existing, so the
zero-iframe assertion is a claim about the escaping alone; the test asserts the
element count and the literal rendered text separately, taking the count before
any click an overlay could intercept.
Verified: make check 39 suites / 811 tests, test-e2e 55/55 including the
WebAssembly-under-CSP assertion, test-e2e-firefox 8/8, zero CSP violations
asserted rather than merely unobserved. Reverting only balanceLine's
interpolation reproduces the attack as 2 iframes on the address screen.
decodeCalldata consulted only the 512-entry bundled list and defaulted to 18
decimals, so a transfer of 5,000 units of a 6-decimal token rendered
"Amount 0.0000" and the user confirmed a drain reading zero. The same
understatement applied to approve, where an unbounded allowance also rendered
0.0000.
Decimals now resolve from the bundled list, then trackedTokens, then the
address's explorer-reported entry, with uint8 validation and a refusal when
sources for one contract disagree. When no source knows the scale, no
formatUnits call is reached at all: the line renders raw base units with an
explicit "decimals unknown" warning, and the same string reaches
pendingTxDetails.amount so the status screens carry no formatted figure either.
Verified failing first two independent ways: restoring the old
`token ? token.decimals : 18` fails 6 of 15 new tests with the unknown case
reporting "0.0000"; making the resolver return 18 rather than null on the
unknown path fails a different 6, spanning resolver and render levels.
The send screen was built from the indexer's decimals while the transfer was
encoded from the contract's decimals() read at signing time, with nothing
comparing them. A token whose scales disagree moved 10^12 times the approved
amount.
The displayed scale is now carried on pendingTx from the same tokenBalances
entry the amount, balance and symbol were rendered from, and both encode sites
use it. transferAmount.js refuses rather than falling back when the two scales
disagree or either is unusable.
Adds the first end-to-end coverage of the popup's own Send -> ConfirmTx ->
Sign & Send path; #btn-confirm-send had never been clicked by any test.
Verification compared the signed artifact against the dApp's request object.
For every field the dApp omitted -- normally nonce, gas limit and all the fee
fields, since the popup filled them in -- the number the user actually read on
screen was verified by nothing, and only absolute ceilings stood behind it.
The transaction is now populated in the background before the approval window
opens, and that populated object is both what the popup displays and what the
signed artifact is verified against. Every consequential field becomes an
equality comparison; the ceilings remain as a backstop. Population failing
means no approval and no window, and the error goes to the requesting page --
earlier than before, where the same estimate failed after the password had been
typed.
The account is pinned too: `from` is compared against the address named at
approval time rather than whichever address is active at signing, so switching
accounts mid-flow refuses instead of signing from an account the approval did
not name. The message-signing path had the same defect and gets the same fix.
Nonce selection moves earlier as a consequence; the concurrent-approval case
that follows from it is tracked at #271.
A rejected password was reported three different ways depending on which screen
you were on, including the fragment "Wrong password." which is not a sentence.
All six decryptWithPassword call sites now show the same full sentence.
Strings only -- a wrong password still fails closed on every screen and still
resolves no pending approval.
A test pins the invariant per call site: each decryptWithPassword call is walked
out to its enclosing try and forward to that block's catch, and the prose shown
there must equal the canonical sentence. Per-file matching was not enough, since
a file with two call sites kept passing while one of them diverged.
The dust-threshold field was the only validated input in Settings that rejected
without saying anything: the value silently changed back to the stored one with
no explanation. It now flashes "Please enter a whole number of gwei, zero or
greater." alongside the existing resync, matching the idiom the RPC URL field
already uses.
The parse moves to its own module and accepts plain decimal digits only, zero
or greater. Hex and exponent notation are refused rather than accepted: Number()
reads "0x10" as 16 and "1e3" as 1000, neither of which the previous parseInt
produced, and storing a number the user did not type is the same silent
substitution this change exists to remove.
The message must fit one line of the reserved flash area -- a wrapped message
pushes the settings view down, which the No Layout Shift policy forbids. That is
pinned by an end-to-end test measuring the rendered line height and the position
of the elements below it, in a single round trip because the flash clears after
two seconds.
approvalVerify now compares every field of the signed artifact against the
approval, not a subset. Transaction types are allowlisted to 0/1/2 and any
field the module does not check is refused outright, so a future transaction
type cannot smuggle consequential fields past verification -- an EIP-7702
type-4 artifact that delegates the signer's own EOA while matching every
displayed field was accepted before this change. The serialized bytes handed
to broadcastTransaction are compared against the parsed artifact, so the
guarantee covers the bytes that actually go to the node.
Signing failures in the popup are retryable again. To make that safe, an
approval is claimed synchronously before the first await and every path that
resolves or removes one goes through a single chokepoint that refuses a claimed
approval. Without it, closing the approval window, switching the active address
or a late reject would report "User rejected the request." to the dApp while
the broadcast completed -- the user then redoes the transfer at a fresh nonce
and it sends twice.
Failure copy distinguishes the stage reached, so a user is never told to start
again from the site when the first attempt may already have reached the network.
Address rows on Home gain an [x] control, on wallets that derive addresses from
an extended key and hold more than one, opening a DeleteAddress confirmation
screen.
Removal cannot destroy anything: the key material stays. Derivation indices are
not renumbered, so the next "+" derives the next unused index rather than
resurrecting the removed one. The confirmation states the real route back --
delete the whole wallet in Settings, which asks for the password and destroys
the stored recovery phrase, then import it again -- and notes that the scan
which follows only finds addresses with on-chain activity. The copy varies by
wallet type, since an xprv wallet has no recovery phrase.
Removing an address that holds a balance is allowed, with a warning naming no
figure; the funds are at the address on-chain and stay there either way.
Selection and active address move only when the removed address was the one
selected, and site permissions are dropped for it alone.
The state transition shares its address comparison, permission cleanup and
active-changed broadcast with the wallet-level removal.
The password no longer crosses the extension messaging boundary: the popup
decrypts and signs, and sends only the raw signed transaction or the signature.
The background re-derives the signer from the artifact and checks it against
the approval it holds before broadcasting, so it is not a blind relay.
Runs the real popup in a pinned containerized Chrome and fails on any uncaught
page error or console.error. Also fixes the two defects it caught: the missing
showView import in addToken.js and the missing addressDotHtml import in
transactionDetail.js.
closes#150closes#151
## Summary
Add a new well at the bottom of the settings view displaying application info (license, author, version, build date, git commit hash linked to Gitea), and an easter egg that reveals a debug mode toggle after clicking the version number 10 times.
## Changes
- **`src/popup/index.html`**: Added About well with license, author, version, build date, and linked commit hash. Added hidden debug well with debug mode toggle.
- **`src/popup/views/settings.js`**: Populate About well from build-time constants. Implement version click counter (10 clicks reveals debug well). Wire up debug mode toggle to state and runtime logger.
- **`src/shared/buildInfo.js`** (new): Module exporting build-time constants (`BUILD_VERSION`, `BUILD_LICENSE`, `BUILD_AUTHOR`, `BUILD_COMMIT`, `BUILD_DATE`, `GITEA_COMMIT_URL`) injected by esbuild define.
- **`build.js`**: Read git commit hash (short + full) and version from package.json, pass as esbuild `define` constants. Also reads `GIT_COMMIT_SHORT`/`GIT_COMMIT_FULL` env vars for Docker builds.
- **`Dockerfile`**: Accept `GIT_COMMIT_SHORT` and `GIT_COMMIT_FULL` build args, set as env vars for the build step.
- **`Makefile`**: Pass git commit hashes as Docker build args.
- **`src/shared/state.js`**: Add `debugMode` boolean to state (persisted).
- **`src/shared/log.js`**: Add runtime debug flag that supplements the compile-time `DEBUG` constant. Debug mode toggle updates this flag immediately.
closes#144
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: clawbot <clawbot@sneak.cloud>
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: clawbot <clawbot@eeqj.de>
Co-authored-by: sneak <sneak@sneak.berlin>
Reviewed-on: #145
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Fixes the view stack pop bug where pressing Back in Settings (or any view) always returned to Main instead of the previous view.
Closes [issue #134](#134)
## Problem
The popup UI had no navigation stack. Every back button was hardcoded to a specific destination (usually Main). The reported path:
> Main → Address → Transaction → Settings (gear icon) → Back
...would go to Main instead of returning to the Transaction view.
## Solution
Implemented a proper view navigation stack (like iOS) as already described in the README:
- **`viewStack`** array added to persisted state — survives popup close/reopen
- **`pushCurrentView()`** — pushes the current view name onto the stack before any forward navigation
- **`goBack()`** — pops the stack and shows the previous view; falls back to Main if the stack is empty; re-renders the wallet list when returning to Main
- **`clearViewStack()`** — resets the stack for root transitions (e.g., after adding/deleting a wallet)
### What Changed
1. **helpers.js** — Added navigation stack functions (`pushCurrentView`, `goBack`, `clearViewStack`, `setRenderMain`)
2. **state.js** — Added `viewStack` to persisted state
3. **index.js** — All `ctx.show*()` wrappers now push before navigating forward; gear button uses stack for toggle behavior
4. **All view back buttons** — Replaced hardcoded destinations with `goBack()` (settings, addressDetail, addressToken, transactionDetail, send, receive, addToken, confirmTx, addWallet, settingsAddToken, deleteWallet, export-privkey)
5. **Direct `showView()` forward navigations** — Added `pushCurrentView()` calls before `showView("send")` in addressDetail, addressToken, and home; before `showView("export-privkey")` in addressDetail; before `deleteWallet.show()` in settings
6. **Reset-to-root transitions** — `clearViewStack()` called after adding a wallet (all 3 import types), after deleting the last wallet, and after transaction completion (Done button)
### Navigation Paths Verified
- **Main → Settings → Back** → returns to Main ✓
- **Main → Address → Settings → Back** → returns to Address ✓
- **Main → Address → Transaction → Settings → Back** → returns to Transaction ✓ (the reported bug)
- **Main → Address → Token → Send → ConfirmTx → Back → Back → Back → Back** → unwinds correctly through each view back to Main ✓
- **Main → Address → Token → Transaction → Settings → Back** → returns to Transaction ✓
- **Settings → Add Wallet → (add) → Main** → stack cleared, fresh root ✓
- **Settings → Delete Wallet → Back** → returns to Settings ✓
- **Settings → Delete Wallet → (confirm)** → stack reset to [main], settings shown ✓
- **Address → Send → ConfirmTx → (broadcast) → SuccessTx → Done** → stack reset, returns to address context ✓
- **Popup close/reopen** → viewStack persisted, back navigation still works ✓
Co-authored-by: user <user@Mac.lan guest wan>
Reviewed-on: #146
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Display the red debug banner when on a testnet OR when DEBUG is enabled.
When on a testnet, a "TESTNET" label is shown on the far right side of the banner. The banner label shows the network name when not in debug mode, and "DEBUG / INSECURE" when debug is on.
closes#140
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #143
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
All address rendering now uses a single `renderAddressHtml()` function in helpers.js that produces consistent output everywhere:
- Color dot (deterministic from address)
- Full address with dashed-underline click-to-copy affordance
- Etherscan external link icon
## Changes
Refactored all 9 view files that display addresses to use the shared utility:
- **approval.js** (approve-tx, approve-sign, approve-site): addresses now have click-to-copy with dashed underline affordance
- **confirmTx.js**: from/to addresses and token contract address use shared renderer
- **txStatus.js**: wait/success/error transaction addresses
- **transactionDetail.js**: from/to and decoded calldata addresses
- **home.js**: active address display
- **send.js**: from-address display
- **receive.js**: receive address display
- **addressDetail.js**: address line and export-privkey address
- **addressToken.js**: address line and contract info
## Consolidation
- `EXT_ICON` SVG constant: removed 6 duplicates, now in helpers.js
- `copyableHtml()`: removed duplicate, now in helpers.js
- `etherscanLinkHtml()`: removed duplicates, now in helpers.js
- `attachCopyHandlers()`: removed duplicate, now in helpers.js
- Net: **-193 lines** (174 added, 367 removed)
closes#97
Co-authored-by: user <user@Mac.lan guest wan>
Reviewed-on: #129
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Fixes USD prices still showing on the main view when connected to a testnet (e.g. Sepolia). The root cause was stale mainnet prices lingering in the in-memory price cache after switching networks.
### Root Cause
PR #137 correctly made `refreshPrices()` skip fetching on testnets, but the cached prices from a prior mainnet session remained in the `prices` object. All display functions (`getPrice()`, `getAddressValueUsd()`, etc.) used whatever was cached without checking which network was active.
### Changes
- **`src/shared/prices.js`**
- `refreshPrices()` now clears the price cache when on a testnet instead of silently returning
- New `clearPrices()` function empties the cache and resets the fetch timestamp
- `getPrice()` returns null on testnets (defense-in-depth)
- `getAddressValueUsd()`, `getWalletValueUsd()`, `getTotalValueUsd()` return null on testnets
- **`src/popup/views/settings.js`**
- Network switcher immediately clears prices when switching to a testnet, so the UI updates without waiting for the next refresh cycle
closes#139
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #142
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
The approve-tx view (dapp-initiated transaction approval) now shows the estimated USD value next to the ETH amount being transferred, using the existing `getPrice`/`formatUsd` from `shared/prices.js`.
This matches the behavior already present in the manual send confirmation view (`confirmTx.js`).
When ETH price is available, the value line shows e.g. `0.5000 ETH ($1,650.00)`. When price is unavailable, it falls back gracefully to just the ETH amount.
closes#138
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #141
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
When viewing the address-token page for our own address with an ERC-20 token, the etherscan link now navigates to the token-specific page (`etherscan.io/token/<contract>?a=<address>`) instead of the plain address page.
Closes#135
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #136
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Adds Sepolia testnet support to AutistMask.
### Changes
- **New `src/shared/networks.js`** — centralized network definitions (mainnet + Sepolia) with chain IDs, default RPC/Blockscout endpoints, and block explorer URLs
- **State management** — `networkId` added to persisted state; defaults to mainnet for backward compatibility
- **Settings UI** — network selector dropdown lets users switch between Ethereum Mainnet and Sepolia Testnet
- **Dynamic explorer links** — all hardcoded `etherscan.io` URLs replaced with dynamic links from the current network config (`sepolia.etherscan.io` for Sepolia)
- **Background service** — `wallet_switchEthereumChain` now accepts both mainnet (0x1) and Sepolia (0xaa36a7); broadcasts `chainChanged` to connected dApps
- **Inpage provider** — fetches chain ID on init and updates dynamically via `chainChanged` events (no more hardcoded `0x1`)
- **Blockscout API** — uses `eth-sepolia.blockscout.com/api/v2` for Sepolia
- **Etherscan labels** — phishing/scam checks use the correct explorer per network
- **Price fetching** — skipped on testnets (testnet tokens have no real market value)
- **RPC validation** — checks against the selected network's chain ID, not hardcoded mainnet
- **ethers provider** — `getProvider()` uses the correct ethers `Network` for Sepolia
### API Endpoints Verified
| Service | Mainnet | Sepolia |
|---------|---------|--------|
| Etherscan | etherscan.io | sepolia.etherscan.io |
| Blockscout | eth.blockscout.com/api/v2 | eth-sepolia.blockscout.com/api/v2 |
| RPC | ethereum-rpc.publicnode.com | ethereum-sepolia-rpc.publicnode.com |
| CoinDesk (prices) | ✅ | N/A (skipped on testnet) |
closes#110
Reviewed-on: #137
THIS WAS ONESHOTTED USING OPUS 4. WTAF
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Expands the confirm-tx warning system with three new warning types, all using the existing `visibility:hidden/visible` pattern from PR #98 (no animations, no layout shift).
## Changes
1. **Scam address list expanded** (7 → 652 addresses): Sourced from [MyEtherWallet/ethereum-lists](https://github.com/MyEtherWallet/ethereum-lists) darklist (MIT license). Checked synchronously before sending.
2. **Contract address warning**: When the recipient is a smart contract (detected via `getCode`), shows a warning that sending directly to a contract may result in permanent loss of funds.
3. **Null/burn address warning**: Detects known burn addresses (`0x0000...0000`, `0x...dead`, `0x...deadbeef`) and warns that funds are permanently destroyed.
4. **No-history warning** (existing from #98): Unchanged, still shows for EOAs with zero transaction history.
All warnings use reserved-space `visibility:hidden/visible` elements — no layout shift, no animations.
closes#114
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: clawbot <clawbot@eeqj.de>
Reviewed-on: #118
Co-authored-by: clawbot <sneak+clawbot@sneak.cloud>
Co-committed-by: clawbot <sneak+clawbot@sneak.cloud>
- Always display a Type field as the first item under the Transaction
heading, identifying the transaction as: Native ETH Transfer, ERC-20
Token Transfer, Swap, Token Approval, Contract Call, or Contract Creation
- Show token contract address with identicon for ERC-20 transfers
- Fetch and display on-chain details from Blockscout: block number,
nonce, transaction fee, gas price, and gas used
- All new fields are click-copyable with Etherscan links where applicable
closes#95
All isoDate() functions now output proper ISO 8601 format with timezone
offset (e.g. 2026-02-28T15:30:00-08:00) instead of bare datetime strings.
Also uses 'T' separator per ISO 8601.
closes#116
Add theme preference (light/dark/system) stored in extension state.
System mode follows prefers-color-scheme and listens for changes.
Dark mode inverts the monochrome palette (white-on-black).
Theme selector added to Display section in settings.
Closes#125
Replace display:none (hidden class) with visibility:hidden/visible for all
error, warning, and status message elements across the extension UI. This
prevents layout shift when messages appear or disappear.
Changes:
- helpers.js: showError/hideError now use visibility instead of hidden class
- index.html: all error/status divs use visibility:hidden + min-height
- confirmTx.js: warnings, errors, fee section use visibility
- approval.js: tx-error, sign-error, danger-warning use visibility
- addressDetail.js: export-privkey-flash uses visibility
- deleteWallet.js: delete-wallet-flash uses visibility
- addWallet.js: phrase-warning uses visibility
- receive.js: erc20-warning uses visibility
- addToken.js: add-token-info uses visibility
- settingsAddToken.js: settings-addtoken-info uses visibility
