approvalVerify now compares every field of the signed artifact against the
approval, not a subset. Transaction types are allowlisted to 0/1/2 and any
field the module does not check is refused outright, so a future transaction
type cannot smuggle consequential fields past verification -- an EIP-7702
type-4 artifact that delegates the signer's own EOA while matching every
displayed field was accepted before this change. The serialized bytes handed
to broadcastTransaction are compared against the parsed artifact, so the
guarantee covers the bytes that actually go to the node.
Signing failures in the popup are retryable again. To make that safe, an
approval is claimed synchronously before the first await and every path that
resolves or removes one goes through a single chokepoint that refuses a claimed
approval. Without it, closing the approval window, switching the active address
or a late reject would report "User rejected the request." to the dApp while
the broadcast completed -- the user then redoes the transfer at a fresh nonce
and it sends twice.
Failure copy distinguishes the stage reached, so a user is never told to start
again from the site when the first attempt may already have reached the network.
Address rows on Home gain an [x] control, on wallets that derive addresses from
an extended key and hold more than one, opening a DeleteAddress confirmation
screen.
Removal cannot destroy anything: the key material stays. Derivation indices are
not renumbered, so the next "+" derives the next unused index rather than
resurrecting the removed one. The confirmation states the real route back --
delete the whole wallet in Settings, which asks for the password and destroys
the stored recovery phrase, then import it again -- and notes that the scan
which follows only finds addresses with on-chain activity. The copy varies by
wallet type, since an xprv wallet has no recovery phrase.
Removing an address that holds a balance is allowed, with a warning naming no
figure; the funds are at the address on-chain and stay there either way.
Selection and active address move only when the removed address was the one
selected, and site permissions are dropped for it alone.
The state transition shares its address comparison, permission cleanup and
active-changed broadcast with the wallet-level removal.
The password no longer crosses the extension messaging boundary: the popup
decrypts and signs, and sends only the raw signed transaction or the signature.
The background re-derives the signer from the artifact and checks it against
the approval it holds before broadcasting, so it is not a blind relay.
Runs the real popup in a pinned containerized Chrome and fails on any uncaught
page error or console.error. Also fixes the two defects it caught: the missing
showView import in addToken.js and the missing addressDotHtml import in
transactionDetail.js.
closes#150closes#151
## Summary
Add a new well at the bottom of the settings view displaying application info (license, author, version, build date, git commit hash linked to Gitea), and an easter egg that reveals a debug mode toggle after clicking the version number 10 times.
## Changes
- **`src/popup/index.html`**: Added About well with license, author, version, build date, and linked commit hash. Added hidden debug well with debug mode toggle.
- **`src/popup/views/settings.js`**: Populate About well from build-time constants. Implement version click counter (10 clicks reveals debug well). Wire up debug mode toggle to state and runtime logger.
- **`src/shared/buildInfo.js`** (new): Module exporting build-time constants (`BUILD_VERSION`, `BUILD_LICENSE`, `BUILD_AUTHOR`, `BUILD_COMMIT`, `BUILD_DATE`, `GITEA_COMMIT_URL`) injected by esbuild define.
- **`build.js`**: Read git commit hash (short + full) and version from package.json, pass as esbuild `define` constants. Also reads `GIT_COMMIT_SHORT`/`GIT_COMMIT_FULL` env vars for Docker builds.
- **`Dockerfile`**: Accept `GIT_COMMIT_SHORT` and `GIT_COMMIT_FULL` build args, set as env vars for the build step.
- **`Makefile`**: Pass git commit hashes as Docker build args.
- **`src/shared/state.js`**: Add `debugMode` boolean to state (persisted).
- **`src/shared/log.js`**: Add runtime debug flag that supplements the compile-time `DEBUG` constant. Debug mode toggle updates this flag immediately.
closes#144
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: clawbot <clawbot@sneak.cloud>
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: clawbot <clawbot@eeqj.de>
Co-authored-by: sneak <sneak@sneak.berlin>
Reviewed-on: #145
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Fixes the view stack pop bug where pressing Back in Settings (or any view) always returned to Main instead of the previous view.
Closes [issue #134](#134)
## Problem
The popup UI had no navigation stack. Every back button was hardcoded to a specific destination (usually Main). The reported path:
> Main → Address → Transaction → Settings (gear icon) → Back
...would go to Main instead of returning to the Transaction view.
## Solution
Implemented a proper view navigation stack (like iOS) as already described in the README:
- **`viewStack`** array added to persisted state — survives popup close/reopen
- **`pushCurrentView()`** — pushes the current view name onto the stack before any forward navigation
- **`goBack()`** — pops the stack and shows the previous view; falls back to Main if the stack is empty; re-renders the wallet list when returning to Main
- **`clearViewStack()`** — resets the stack for root transitions (e.g., after adding/deleting a wallet)
### What Changed
1. **helpers.js** — Added navigation stack functions (`pushCurrentView`, `goBack`, `clearViewStack`, `setRenderMain`)
2. **state.js** — Added `viewStack` to persisted state
3. **index.js** — All `ctx.show*()` wrappers now push before navigating forward; gear button uses stack for toggle behavior
4. **All view back buttons** — Replaced hardcoded destinations with `goBack()` (settings, addressDetail, addressToken, transactionDetail, send, receive, addToken, confirmTx, addWallet, settingsAddToken, deleteWallet, export-privkey)
5. **Direct `showView()` forward navigations** — Added `pushCurrentView()` calls before `showView("send")` in addressDetail, addressToken, and home; before `showView("export-privkey")` in addressDetail; before `deleteWallet.show()` in settings
6. **Reset-to-root transitions** — `clearViewStack()` called after adding a wallet (all 3 import types), after deleting the last wallet, and after transaction completion (Done button)
### Navigation Paths Verified
- **Main → Settings → Back** → returns to Main ✓
- **Main → Address → Settings → Back** → returns to Address ✓
- **Main → Address → Transaction → Settings → Back** → returns to Transaction ✓ (the reported bug)
- **Main → Address → Token → Send → ConfirmTx → Back → Back → Back → Back** → unwinds correctly through each view back to Main ✓
- **Main → Address → Token → Transaction → Settings → Back** → returns to Transaction ✓
- **Settings → Add Wallet → (add) → Main** → stack cleared, fresh root ✓
- **Settings → Delete Wallet → Back** → returns to Settings ✓
- **Settings → Delete Wallet → (confirm)** → stack reset to [main], settings shown ✓
- **Address → Send → ConfirmTx → (broadcast) → SuccessTx → Done** → stack reset, returns to address context ✓
- **Popup close/reopen** → viewStack persisted, back navigation still works ✓
Co-authored-by: user <user@Mac.lan guest wan>
Reviewed-on: #146
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Display the red debug banner when on a testnet OR when DEBUG is enabled.
When on a testnet, a "TESTNET" label is shown on the far right side of the banner. The banner label shows the network name when not in debug mode, and "DEBUG / INSECURE" when debug is on.
closes#140
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #143
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
All address rendering now uses a single `renderAddressHtml()` function in helpers.js that produces consistent output everywhere:
- Color dot (deterministic from address)
- Full address with dashed-underline click-to-copy affordance
- Etherscan external link icon
## Changes
Refactored all 9 view files that display addresses to use the shared utility:
- **approval.js** (approve-tx, approve-sign, approve-site): addresses now have click-to-copy with dashed underline affordance
- **confirmTx.js**: from/to addresses and token contract address use shared renderer
- **txStatus.js**: wait/success/error transaction addresses
- **transactionDetail.js**: from/to and decoded calldata addresses
- **home.js**: active address display
- **send.js**: from-address display
- **receive.js**: receive address display
- **addressDetail.js**: address line and export-privkey address
- **addressToken.js**: address line and contract info
## Consolidation
- `EXT_ICON` SVG constant: removed 6 duplicates, now in helpers.js
- `copyableHtml()`: removed duplicate, now in helpers.js
- `etherscanLinkHtml()`: removed duplicates, now in helpers.js
- `attachCopyHandlers()`: removed duplicate, now in helpers.js
- Net: **-193 lines** (174 added, 367 removed)
closes#97
Co-authored-by: user <user@Mac.lan guest wan>
Reviewed-on: #129
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Fixes USD prices still showing on the main view when connected to a testnet (e.g. Sepolia). The root cause was stale mainnet prices lingering in the in-memory price cache after switching networks.
### Root Cause
PR #137 correctly made `refreshPrices()` skip fetching on testnets, but the cached prices from a prior mainnet session remained in the `prices` object. All display functions (`getPrice()`, `getAddressValueUsd()`, etc.) used whatever was cached without checking which network was active.
### Changes
- **`src/shared/prices.js`**
- `refreshPrices()` now clears the price cache when on a testnet instead of silently returning
- New `clearPrices()` function empties the cache and resets the fetch timestamp
- `getPrice()` returns null on testnets (defense-in-depth)
- `getAddressValueUsd()`, `getWalletValueUsd()`, `getTotalValueUsd()` return null on testnets
- **`src/popup/views/settings.js`**
- Network switcher immediately clears prices when switching to a testnet, so the UI updates without waiting for the next refresh cycle
closes#139
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #142
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
The approve-tx view (dapp-initiated transaction approval) now shows the estimated USD value next to the ETH amount being transferred, using the existing `getPrice`/`formatUsd` from `shared/prices.js`.
This matches the behavior already present in the manual send confirmation view (`confirmTx.js`).
When ETH price is available, the value line shows e.g. `0.5000 ETH ($1,650.00)`. When price is unavailable, it falls back gracefully to just the ETH amount.
closes#138
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #141
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
When viewing the address-token page for our own address with an ERC-20 token, the etherscan link now navigates to the token-specific page (`etherscan.io/token/<contract>?a=<address>`) instead of the plain address page.
Closes#135
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #136
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
Adds Sepolia testnet support to AutistMask.
### Changes
- **New `src/shared/networks.js`** — centralized network definitions (mainnet + Sepolia) with chain IDs, default RPC/Blockscout endpoints, and block explorer URLs
- **State management** — `networkId` added to persisted state; defaults to mainnet for backward compatibility
- **Settings UI** — network selector dropdown lets users switch between Ethereum Mainnet and Sepolia Testnet
- **Dynamic explorer links** — all hardcoded `etherscan.io` URLs replaced with dynamic links from the current network config (`sepolia.etherscan.io` for Sepolia)
- **Background service** — `wallet_switchEthereumChain` now accepts both mainnet (0x1) and Sepolia (0xaa36a7); broadcasts `chainChanged` to connected dApps
- **Inpage provider** — fetches chain ID on init and updates dynamically via `chainChanged` events (no more hardcoded `0x1`)
- **Blockscout API** — uses `eth-sepolia.blockscout.com/api/v2` for Sepolia
- **Etherscan labels** — phishing/scam checks use the correct explorer per network
- **Price fetching** — skipped on testnets (testnet tokens have no real market value)
- **RPC validation** — checks against the selected network's chain ID, not hardcoded mainnet
- **ethers provider** — `getProvider()` uses the correct ethers `Network` for Sepolia
### API Endpoints Verified
| Service | Mainnet | Sepolia |
|---------|---------|--------|
| Etherscan | etherscan.io | sepolia.etherscan.io |
| Blockscout | eth.blockscout.com/api/v2 | eth-sepolia.blockscout.com/api/v2 |
| RPC | ethereum-rpc.publicnode.com | ethereum-sepolia-rpc.publicnode.com |
| CoinDesk (prices) | ✅ | N/A (skipped on testnet) |
closes#110
Reviewed-on: #137
THIS WAS ONESHOTTED USING OPUS 4. WTAF
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Expands the confirm-tx warning system with three new warning types, all using the existing `visibility:hidden/visible` pattern from PR #98 (no animations, no layout shift).
## Changes
1. **Scam address list expanded** (7 → 652 addresses): Sourced from [MyEtherWallet/ethereum-lists](https://github.com/MyEtherWallet/ethereum-lists) darklist (MIT license). Checked synchronously before sending.
2. **Contract address warning**: When the recipient is a smart contract (detected via `getCode`), shows a warning that sending directly to a contract may result in permanent loss of funds.
3. **Null/burn address warning**: Detects known burn addresses (`0x0000...0000`, `0x...dead`, `0x...deadbeef`) and warns that funds are permanently destroyed.
4. **No-history warning** (existing from #98): Unchanged, still shows for EOAs with zero transaction history.
All warnings use reserved-space `visibility:hidden/visible` elements — no layout shift, no animations.
closes#114
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Co-authored-by: user <user@Mac.lan guest wan>
Co-authored-by: clawbot <clawbot@eeqj.de>
Reviewed-on: #118
Co-authored-by: clawbot <sneak+clawbot@sneak.cloud>
Co-committed-by: clawbot <sneak+clawbot@sneak.cloud>
- Always display a Type field as the first item under the Transaction
heading, identifying the transaction as: Native ETH Transfer, ERC-20
Token Transfer, Swap, Token Approval, Contract Call, or Contract Creation
- Show token contract address with identicon for ERC-20 transfers
- Fetch and display on-chain details from Blockscout: block number,
nonce, transaction fee, gas price, and gas used
- All new fields are click-copyable with Etherscan links where applicable
closes#95
All isoDate() functions now output proper ISO 8601 format with timezone
offset (e.g. 2026-02-28T15:30:00-08:00) instead of bare datetime strings.
Also uses 'T' separator per ISO 8601.
closes#116
Add theme preference (light/dark/system) stored in extension state.
System mode follows prefers-color-scheme and listens for changes.
Dark mode inverts the monochrome palette (white-on-black).
Theme selector added to Display section in settings.
Closes#125
Replace display:none (hidden class) with visibility:hidden/visible for all
error, warning, and status message elements across the extension UI. This
prevents layout shift when messages appear or disappear.
Changes:
- helpers.js: showError/hideError now use visibility instead of hidden class
- index.html: all error/status divs use visibility:hidden + min-height
- confirmTx.js: warnings, errors, fee section use visibility
- approval.js: tx-error, sign-error, danger-warning use visibility
- addressDetail.js: export-privkey-flash uses visibility
- deleteWallet.js: delete-wallet-flash uses visibility
- addWallet.js: phrase-warning uses visibility
- receive.js: erc20-warning uses visibility
- addToken.js: add-token-info uses visibility
- settingsAddToken.js: settings-addtoken-info uses visibility
When a user clicks to copy text (addresses, tx hashes, etc.), the copied
element now briefly flashes with inverted colors (bg/fg swap) and fades
back over ~300ms. This provides localized visual feedback in addition to
the existing flash message.
Applied to all click-to-copy elements across all views.
closes#100
- Private key import now checks ALL wallets (hd, xprv, key) for address conflicts
- xprv import now checks xpub against existing xpubs and addresses across all wallet types
- Mnemonic import now checks xpub against xprv wallets and addresses across all types
- Extract findWalletByAddress() and findWalletByXpub() helpers for consistent dedup
closes#111
Remove all CSS transitions, max-height changes, and opacity animations.
The warning container always reserves its space with visibility:hidden
and switches to visibility:visible when needed. No layout shift ever.
Instead of permanently reserving space with visibility:hidden, the warning
container now uses max-height + opacity transitions. Space is reserved during
the async check, then smoothly collapses to 0 if the warning isn't needed.
This reclaims ~40px of popup viewport in the common case.
The 'From Phrase' tab was missing hover:bg-fg and hover:text-bg classes
when transitioning from active to inactive state. switchMode() now
explicitly toggles these hover classes on all tabs, ensuring identical
hover behavior across all three inactive tabs.
- Active tab: solid border on top/sides, bottom border matches background
(connects to content area), bold text
- Inactive tabs: dashed borders in border-light color, muted text,
transparent bottom border
- Inactive hover: invert (bg-fg text-bg) for clear clickability signal
- All three tabs behave identically on hover
Tabs are not buttons (they change UI state, not application state).
All tabs now use underline style with identical hover behavior:
- Active: bold text + solid bottom border
- Inactive: muted text + transparent bottom border
- Hover (all tabs): text brightens to fg + bottom border appears
This ensures all tabs clearly indicate clickability on hover,
including the currently active one.
Per README clickable affordance policy: all tabs now use visible
border, padding, and hover:bg-fg hover:text-bg (invert to
white-on-black). Active tab is inverted (bg-fg text-bg). All
three tabs behave identically on hover regardless of active state.
Merge all three wallet import methods (recovery phrase, private key,
extended key/xprv) into one tabbed add-wallet view with a mode selector.
This fixes the blank import-xprv render (it was missing from the VIEWS
array) and the broken back-button navigation from the separate import
views.
- Add tab selector: Recovery Phrase | Private Key | Extended Key (xprv)
- Share password fields across all modes
- Remove separate import-key and import-xprv views and modules
- Add duplicate wallet detection for private key imports
- All tabs follow affordance policy (visible border + hover state)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add the ability to import an existing HD wallet using an extended
private key (xprv) instead of a mnemonic phrase.
- New 'xprv' wallet type with full HD derivation and address scanning
- New importXprv view with password encryption
- Updated getSignerForAddress to handle xprv wallet type
- Added xprv link to the add-wallet view
- Allow adding derived addresses for xprv wallets
Closes#20
Replace display:none with persistent visibility:hidden so the warning
area occupies the same vertical space regardless of API result.
This eliminates the layout shift that occurred when the container was
collapsed after the recipient history check returned.
- Reserve space for the warning upfront using visibility:hidden instead
of display:none, preventing layout shift per README policy
- Move warning HTML to index.html as a static element rather than
injecting dynamically
- Skip warning for contract addresses (check getCode first) since
getTransactionCount only returns outgoing tx nonce
- Collapse reserved space when warning is not needed (address has
history, is a contract, or on RPC error)
On the confirm-tx view, asynchronously check the recipient address
transaction count via getTransactionCount(). If zero, display a
prominent red warning advising the user to double-check the address.
Closes#82
List view rows (home, addressDetail, addressToken) should only be clickable
as a whole to navigate to the detail view. Click-to-copy on individual
elements belongs only in the transaction detail view.
Reverts timestamp click-to-copy changes in list views per review feedback.
Keeps blockNumberHtml() and detail-view timestamp changes.
