v0.26c

Our wget_verify function uses wget to download a file and then check
the file's hash. If wget fails, i.e. because of a 404 or other HTTP
or network error, we exited setup without displaying any output because
normally there are no errors and -q keeps the setup output clean.

Wrapping wget with our hide_output function, and dropping -q, captures
wget's output and shows it and exits setup just if wget fails.

see #1297

CHANGELOG.md

@@ -1,6 +1,24 @@
 CHANGELOG
 =========
 
+v0.26c (February 13, 2018)
+--------------------------
+
+Setup:
+
+* Upgrades from v0.21c (February 1, 2017) or earlier were broken because the intermediate versions of ownCloud used in setup were no longer available from ownCloud.
+* Some download errors had no output --- there is more output on error now.
+
+Control Panel:
+
+* The background service for the control panel was not restarting on updates, leaving the old version running. This was broken in v0.26 and is now fixed.
+* Installing your own TLS/SSL certificate had been broken since v0.24 because the new version of openssl became stricter about CSR generation parameters.
+* Fixed password length help text.
+
+Contacts/Calendar:
+
+* Upgraded Nextcloud from 12.0.3 to 12.0.5.
+
 v0.26b (January 25, 2018)
 -------------------------
 

CONTRIBUTING.md

@@ -1,3 +1,50 @@
+# Contributing
+
+Mail-in-a-Box is an open source project. Your contributions and pull requests are welcome.
+
+## Development
+
+To start developing Mail-in-a-Box, [clone the repository](https://github.com/mail-in-a-box/mailinabox) and familiarize yourself with the code.
+
+    $ git clone https://github.com/mail-in-a-box/mailinabox
+
+### Vagrant and VirtualBox
+
+We recommend you use [Vagrant](https://www.vagrantup.com/intro/getting-started/install.html) and [VirtualBox](https://www.virtualbox.org/wiki/Downloads) for development. Please install them first.
+
+With Vagrant set up, the following should boot up Mail-in-a-Box inside a virtual machine:
+
+    $ vagrant up --provision
+
+_If you're seeing an error message about your *IP address being listed in the Spamhaus Block List*, simply uncomment the `export SKIP_NETWORK_CHECKS=1` line in `Vagrantfile`. It's normal, you're probably using a dynamic IP address assigned by your Internet provider–they're almost all listed._
+
+### Modifying your `hosts` file
+
+After a while, Mail-in-a-Box will be available at `192.168.50.4` (unless you changed that in your `Vagrantfile`). To be able to use the web-based bits, we recommend to add a hostname to your `hosts` file:
+
+    $ echo "192.168.50.4 mailinabox.lan" | sudo tee -a /etc/hosts
+
+You should now be able to navigate to https://mailinabox.lan/admin using your browser. There should be an initial admin user with the name `me@mailinabox.lan` and the password `12345678`.
+
+### Making changes
+
+Your working copy of Mail-in-a-Box will be mounted inside your VM at `/vagrant`. Any change you make locally will appear inside your VM automatically.
+
+Running `vagrant up --provision` again will repeat the installation with your modifications.
+
+Alternatively, you can also ssh into the VM using:
+
+    $ vagrant ssh
+
+Once inside the VM, you can re-run individual parts of the setup like in this example:
+
+    vm$ cd /vagrant
+    vm$ sudo setup/owncloud.sh # replace with script you'd like to re-run
+
+### Tests
+
+Mail-in-a-Box needs more tests. If you're still looking for a way to help out, writing and contributing tests would be a great start!
+
 ## Public domain
 
 This project is in the public domain. Copyright and related rights in the work worldwide are waived through the [CC0 1.0 Universal public domain dedication][CC0]. See the LICENSE file in this directory.

README.md

@@ -59,7 +59,7 @@ by me:
 	$ curl -s https://keybase.io/joshdata/key.asc | gpg --import
 	gpg: key C10BDD81: public key "Joshua Tauberer <jt@occams.info>" imported
 
-	$ git verify-tag v0.26b
+	$ git verify-tag v0.26c
 	gpg: Signature made ..... using RSA key ID C10BDD81
 	gpg: Good signature from "Joshua Tauberer <jt@occams.info>"
 	gpg: WARNING: This key is not certified with a trusted signature!
@@ -72,7 +72,7 @@ and on my [personal homepage](https://razor.occams.info/). (Of course, if this r
 
 Checkout the tag corresponding to the most recent release:
 
-	$ git checkout v0.26b
+	$ git checkout v0.26c
 
 Begin the installation.
 
@@ -82,6 +82,12 @@ For help, DO NOT contact me directly --- I don't do tech support by email or twe
 
 Post your question on the [discussion forum](https://discourse.mailinabox.email/) instead, where me and other Mail-in-a-Box users may be able to help you.
 
+Contributing and Development
+----------------------------
+
+Mail-in-a-Box is an open source project. Your contributions and pull requests are welcome. See [CONTRIBUTING](CONTRIBUTING.md) to get started. 
+
+
 The Acknowledgements
 --------------------
 

management/ssl_certificates.py

@@ -556,7 +556,7 @@ def create_csr(domain, ssl_key, country_code, env):
                 "openssl", "req", "-new",
                 "-key", ssl_key,
                 "-sha256",
-                "-subj", "/C=%s/ST=/L=/O=/CN=%s" % (country_code, domain)])
+                "-subj", "/C=%s/CN=%s" % (country_code, domain)])
 
 def install_cert(domain, ssl_cert, ssl_chain, env, raw=False):
 	# Write the combined cert+chain to a temporary path and validate that it is OK.

management/templates/ssl.html

@@ -159,7 +159,11 @@ function ssl_install(elem) {
 }
 
 function show_csr() {
+ // Can't show a CSR until both inputs are entered.
  if ($('#ssldomain').val() == "") return;
+ if ($('#sslcc').val() == "") return;
+
+ // Scroll to it and fetch.
  $('#csr_info').slideDown();
  $('#ssl_csr').text('Loading...');
  api(

management/templates/users.html

@@ -213,7 +213,7 @@ function users_set_password(elem) {
 
   show_modal_confirm(
     "Set Password",
-    $("<p>Set a new password for <b>" + email + "</b>?</p> <p><label for='users_set_password_pw' style='display: block; font-weight: normal'>New Password:</label><input type='password' id='users_set_password_pw'></p><p><small>Passwords must be at least four characters and may not contain spaces.</small>" + yourpw + "</p>"),
+    $("<p>Set a new password for <b>" + email + "</b>?</p> <p><label for='users_set_password_pw' style='display: block; font-weight: normal'>New Password:</label><input type='password' id='users_set_password_pw'></p><p><small>Passwords must be at least eight characters and may not contain spaces.</small>" + yourpw + "</p>"),
     "Set Password",
     function() {
       api(

setup/bootstrap.sh

@@ -7,7 +7,7 @@
 #########################################################
 
 if [ -z "$TAG" ]; then
-	TAG=v0.26b
+	TAG=v0.26c
 fi
 
 # Are we running as root?

setup/functions.sh

@@ -179,7 +179,7 @@ function wget_verify {
 	DEST=$3
 	CHECKSUM="$HASH  $DEST"
 	rm -f $DEST
-	wget -q -O $DEST $URL || exit 1
+	hide_output wget -O $DEST $URL
 	if ! echo "$CHECKSUM" | sha1sum --check --strict > /dev/null; then
 		echo "------------------------------------------------------------"
 		echo "Download of $URL did not match expected checksum."

setup/management.sh

@@ -100,7 +100,7 @@ rm -f /usr/local/bin/mailinabox-daemon # old path
 cat > $inst_dir/start <<EOF;
 #!/bin/bash
 source $venv/bin/activate
-python `pwd`/management/daemon.py
+exec python `pwd`/management/daemon.py
 EOF
 chmod +x $inst_dir/start
 rm -f /etc/init.d/mailinabox

setup/owncloud.sh

@@ -107,12 +107,12 @@ InstallOwncloud() {
 	rm -rf /usr/local/lib/owncloud
 
 	# Download and verify
-	wget_verify https://download.owncloud.org/community/owncloud-$version.zip $hash /tmp/owncloud.zip
+	wget_verify https://download.owncloud.org/community/owncloud-$version.tar.bz2 $hash /tmp/owncloud.tar.bz2
 
 
 	# Extract ownCloud
-	unzip -q /tmp/owncloud.zip -d /usr/local/lib
-	rm -f /tmp/owncloud.zip
+	tar xjf /tmp/owncloud.tar.bz2 -C /usr/local/lib
+	rm -f /tmp/owncloud.tar.bz2
 
 	# The two apps we actually want are not in Nextcloud core. Download the releases from
 	# their github repositories.
@@ -154,8 +154,8 @@ InstallOwncloud() {
 	fi
 }
 
-owncloud_ver=12.0.3
-owncloud_hash=beab41f6a748a43f0accfa6a9808387aef718c61
+owncloud_ver=12.0.5
+owncloud_hash=d25afbac977a4e331f5e38df50aed0844498ca86
 
 # Check if Nextcloud dir exist, and check if version matches owncloud_ver (if either doesn't - install/upgrade)
 if [ ! -d /usr/local/lib/owncloud/ ] \
@@ -183,13 +183,13 @@ if [ ! -d /usr/local/lib/owncloud/ ] \
 	# We only need to check if we do upgrades when owncloud/Nextcloud was previously installed
 	if [ -e /usr/local/lib/owncloud/version.php ]; then
 		if grep -q "OC_VersionString = '8\.1\.[0-9]" /usr/local/lib/owncloud/version.php; then
-			echo "We are running 8.1.x, upgrading to 8.2.3 first"
-			InstallOwncloud 8.2.3 bfdf6166fbf6fc5438dc358600e7239d1c970613
+			echo "We are running 8.1.x, upgrading to 8.2.11 first"
+			InstallOwncloud 8.2.11 e4794938fc2f15a095018ba9d6ee18b53f6f299c
 		fi
 
 		# If we are upgrading from 8.2.x we should go to 9.0 first. Owncloud doesn't support skipping minor versions
 		if grep -q "OC_VersionString = '8\.2\.[0-9]" /usr/local/lib/owncloud/version.php; then
-			echo "We are running version 8.2.x, upgrading to 9.0.2 first"
+			echo "We are running version 8.2.x, upgrading to 9.0.11 first"
 
 			# We need to disable memcached. The upgrade and install fails
 			# with memcached
@@ -207,8 +207,8 @@ if [ ! -d /usr/local/lib/owncloud/ ] \
 EOF
 			chown www-data.www-data $STORAGE_ROOT/owncloud/config.php
 
-			# We can now install owncloud 9.0.2
-			InstallOwncloud 9.0.2 72a3d15d09f58c06fa8bee48b9e60c9cd356f9c5
+			# We can now install owncloud 9.0.11
+			InstallOwncloud 9.0.11 fc8bad8a62179089bc58c406b28997fb0329337b
 
 			# The owncloud 9 migration doesn't migrate calendars and contacts
 			# The option to migrate these are removed in 9.1
@@ -224,20 +224,26 @@ EOF
 
 		# If we are upgrading from 9.0.x we should go to 9.1 first.
 		if grep -q "OC_VersionString = '9\.0\.[0-9]" /usr/local/lib/owncloud/version.php; then
-			echo "We are running ownCloud 9.0.x, upgrading to ownCloud 9.1.4 first"
-			InstallOwncloud 9.1.4 e637cab7b2ca3346164f3506b1a0eb812b4e841a
+			echo "We are running ownCloud 9.0.x, upgrading to ownCloud 9.1.7 first"
+			InstallOwncloud 9.1.7 1307d997d0b23dc42742d315b3e2f11423a9c808
 		fi
 
-		# If we are upgrading from 9.1.x we should go to Nextcloud 10.0 first.
+		# Newer ownCloud 9.1.x versions cannot be upgraded to Nextcloud 10 and have to be
+		# upgraded to Nextcloud 11 straight away, see:
+		# https://github.com/nextcloud/server/issues/2203
+		# However, for some reason, upgrading to the latest Nextcloud 11.0.7 doesn't
+		# work either. Therefore, we're upgrading to Nextcloud 11.0.0 in the interim.
+		# This should not be a problem since we're upgrading to the latest Nextcloud 12
+		# in the next step.
 		if grep -q "OC_VersionString = '9\.1\.[0-9]" /usr/local/lib/owncloud/version.php; then
-			echo "We are running ownCloud 9.1.x, upgrading to Nextcloud 10.0.5 first"
-			InstallNextcloud 10.0.5 686f6a8e9d7867c32e3bf3ca63b3cc2020564bf6
+			echo "We are running ownCloud 9.1.x, upgrading to Nextcloud 11.0.0 first"
+			InstallNextcloud 11.0.0 e8c9ebe72a4a76c047080de94743c5c11735e72e
 		fi
 
 		# If we are upgrading from 10.0.x we should go to Nextcloud 11.0 first.
 		if grep -q "OC_VersionString = '10\.0\.[0-9]" /usr/local/lib/owncloud/version.php; then
-			echo "We are running Nextcloud 10.0.x, upgrading to Nextcloud 11.0.3 first"
-			InstallNextcloud 11.0.3 a396aaa1c9f920099a90a86b4a9cd0ec13083c99
+			echo "We are running Nextcloud 10.0.x, upgrading to Nextcloud 11.0.7 first"
+			InstallNextcloud 11.0.7 f936ddcb2ae3dbb66ee4926eb8b2ebbddc3facbe
 		fi
 	fi