v0.19

closes #898

CHANGELOG.md

@@ -1,6 +1,99 @@
 CHANGELOG
 =========
 
+v0.19 (August 13, 2016)
+-----------------------
+
+Mail:
+
+* Roundcube is updated to version 1.2.1.
+* SSLv3 and RC4 are now no longer supported in incoming and outgoing mail (SMTP port 25).
+
+Control panel:
+
+* The users and aliases APIs are now documented on their control panel pages.
+* The HSTS header was missing.
+* New status checks were added for the ufw firewall.
+
+DNS:
+
+* Add SRV records for CardDAV/CalDAV to facilitate autoconfiguration (e.g. in DavDroid, whose latest version didn't seem to work to configure with entering just a hostname).
+
+System:
+
+* fail2ban jails added for SMTP submission, Roundcube, ownCloud, the control panel, and munin.
+* Mail-in-a-Box can now be installed on the i686 architecture.
+
+v0.18c (June 2, 2016)
+---------------------
+
+* Domain aliases (and misconfigured aliases/catch-alls with non-existent local targets) would accept mail and deliver it to new mailbox folders on disk even if the target address didn't correspond with an existing mail user, instead of rejecting the mail. This issue was introduced in v0.18.
+* The Munin Monitoring link in the control panel now opens a new window.
+* Added an undocumented before-backup script.
+
+v0.18b (May 16, 2016)
+---------------------
+
+* Fixed a Roundcube user accounts issue introduced in v0.18.
+
+v0.18 (May 15, 2016)
+--------------------
+
+ownCloud:
+
+* Updated to ownCloud to 8.2.3 
+
+Mail:
+
+* Roundcube is updated to version 1.1.5 and the Roundcube login screen now says "[hostname] Webmail" instead of "Mail-in-a-Box/Roundcube webmail".
+* Fixed a long-standing issue with training the spam filter not working (because of a file permissions issue).
+
+Control panel:
+
+* Munin system monitoring graphs are now zoomable.
+* When a reboot is required (due to Ubuntu security updates automatically installed), a Reboot Box button now appears on the System Status Checks page of the control panel.
+* It is now possible to add SRV and secondary MX records in the Custom DNS page.
+* Other minor fixes.
+
+System:
+
+* The fail2ban recidive jail, which blocks long-duration brute force attacks, now no longer sends the administrator emails (which were not helpful).
+
+Setup:
+
+* The system hostname is now set during setup.
+* A swap file is now created if system memory is less than 2GB, 5GB of free disk space is available, and if no swap file yet exists.
+* We now install Roundcube from the official GitHub repository instead of our own mirror, which we had previously created to solve problems with SourceForge.
+* DKIM was incorrectly set up on machines where "localhost" was defined as something other than "127.0.0.1".
+
+v0.17c (April 1, 2016)
+----------------------
+
+This update addresses some minor security concerns and some installation issues.
+
+ownCoud:
+
+* Block web access to the configuration parameters (config.php). There is no immediate impact (see [#776](https://github.com/mail-in-a-box/mailinabox/pull/776)), although advanced users may want to take note.
+
+Mail:
+
+* Roundcube html5_notifier plugin updated from version 0.6 to 0.6.2 to fix Roundcube getting stuck for some people.
+
+Control panel:
+
+* Prevent click-jacking of the management interface by adding HTTP headers.
+* Failed login no longer reveals whether an account exists on the system.
+
+Setup:
+
+* Setup dialogs did not appear correctly when connecting to SSH using Putty on Windows.
+* We now install Roundcube from our own mirror because Sourceforge's downloads experience frequent intermittant unavailability.
+
+v0.17b (March 1, 2016)
+----------------------
+
+ownCloud moved their source code to a new location, breaking our installation script.
+
 v0.17 (February 25, 2016)
 -------------------------
 

README.md

@@ -59,7 +59,7 @@ by me:
 	$ curl -s https://keybase.io/joshdata/key.asc | gpg --import
 	gpg: key C10BDD81: public key "Joshua Tauberer <jt@occams.info>" imported
 
-	$ git verify-tag v0.17
+	$ git verify-tag v0.19
 	gpg: Signature made ..... using RSA key ID C10BDD81
 	gpg: Good signature from "Joshua Tauberer <jt@occams.info>"
 	gpg: WARNING: This key is not certified with a trusted signature!
@@ -72,7 +72,7 @@ and on my [personal homepage](https://razor.occams.info/). (Of course, if this r
 
 Checkout the tag corresponding to the most recent release:
 
-	$ git checkout v0.17
+	$ git checkout v0.19
 
 Begin the installation.
 

conf/fail2ban/filter.d/miab-management-daemon.conf

@@ -0,0 +1,12 @@
+# Fail2Ban filter Mail-in-a-Box management daemon
+
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+
+_daemon = mailinabox
+
+failregex = Mail-in-a-Box Management Daemon: Failed login attempt from ip <HOST> - timestamp .*
+ignoreregex =

conf/fail2ban/filter.d/miab-munin.conf

@@ -0,0 +1,7 @@
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+failregex=<HOST> - .*GET /admin/munin/.* HTTP/1.1\" 401.*
+ignoreregex =

conf/fail2ban/filter.d/miab-owncloud.conf

@@ -0,0 +1,7 @@
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+failregex=Login failed: .*Remote IP: '<HOST>[\)']
+ignoreregex =

conf/fail2ban/filter.d/miab-postfix-submission.conf

@@ -0,0 +1,7 @@
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+failregex=postfix/submission/smtpd.*warning.*\[<HOST>\]: .* authentication (failed|aborted)
+ignoreregex =

conf/fail2ban/filter.d/miab-roundcube.conf

@@ -0,0 +1,9 @@
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+
+failregex = IMAP Error: Login failed for .*? from <HOST>\. AUTHENTICATE.*
+
+ignoreregex = 

conf/fail2ban/jail.local

@@ -1,29 +0,0 @@
-# Fail2Ban configuration file for Mail-in-a-Box
-
-[DEFAULT]
-# Whitelist our own IP addresses. 127.0.0.1/8 is the default. But our status checks
-# ping services over the public interface so we should whitelist that address of
-# ours too. The string is substituted during installation.
-ignoreip = 127.0.0.1/8 PUBLIC_IP
-
-# JAILS
-
-[ssh]
-maxretry = 7
-bantime = 3600
-
-[ssh-ddos]
-enabled  = true
-
-[sasl]
-enabled  = true
-
-[dovecot]
-enabled = true
-filter  = dovecotimap
-findtime = 30
-maxretry = 20
-
-[recidive]
-enabled  = true
-maxretry = 10

conf/fail2ban/jails.conf

@@ -0,0 +1,80 @@
+# Fail2Ban configuration file for Mail-in-a-Box. Do not edit.
+# This file is re-generated on updates.
+
+[DEFAULT]
+# Whitelist our own IP addresses. 127.0.0.1/8 is the default. But our status checks
+# ping services over the public interface so we should whitelist that address of
+# ours too. The string is substituted during installation.
+ignoreip = 127.0.0.1/8 PUBLIC_IP
+
+[dovecot]
+enabled = true
+filter  = dovecotimap
+logpath = /var/log/mail.log
+findtime = 30
+maxretry = 20
+
+[miab-management]
+enabled = true
+filter = miab-management-daemon
+port = http,https
+logpath = /var/log/syslog
+maxretry = 20
+findtime = 30
+
+[miab-munin]
+enabled  = true
+port     = http,https
+filter   = miab-munin
+logpath  = /var/log/nginx/access.log
+maxretry = 20
+findtime = 30
+
+[miab-owncloud]
+enabled  = true
+port     = http,https
+filter   = miab-owncloud
+logpath  = STORAGE_ROOT/owncloud/owncloud.log
+maxretry = 20
+findtime = 120
+
+[miab-postfix587]
+enabled  = true
+port     = 587
+filter   = miab-postfix-submission
+logpath  = /var/log/mail.log
+maxretry = 20
+findtime = 30
+
+[miab-roundcube]
+enabled  = true
+port     = http,https
+filter   = miab-roundcube
+logpath  = /var/log/roundcubemail/errors
+maxretry = 20
+findtime = 30
+
+[recidive]
+enabled  = true
+maxretry = 10
+action   = iptables-allports[name=recidive]
+# In the recidive section of jail.conf the action contains:
+#
+# action   = iptables-allports[name=recidive]
+#            sendmail-whois-lines[name=recidive, logpath=/var/log/fail2ban.log]
+#
+# The last line on the action will sent an email to the configured address. This mail will
+# notify the administrator that someone has been repeatedly triggering one of the other jails.
+# By default we don't configure this address and no action is required from the admin anyway.
+# So the notification is ommited. This will prevent message appearing in the mail.log that mail
+# can't be delivered to fail2ban@$HOSTNAME.
+
+[sasl]
+enabled  = true
+
+[ssh]
+maxretry = 7
+bantime = 3600
+
+[ssh-ddos]
+enabled  = true

conf/nginx-primaryonly.conf

@@ -6,6 +6,10 @@
 	location /admin/ {
 		proxy_pass http://127.0.0.1:10222/;
 		proxy_set_header X-Forwarded-For $remote_addr;
+		add_header X-Frame-Options "DENY";
+		add_header X-Content-Type-Options nosniff;
+		add_header Content-Security-Policy "frame-ancestors 'none';";
+		add_header Strict-Transport-Security max-age=31536000;
 	}
 
 	# ownCloud configuration.
@@ -15,8 +19,11 @@
 	rewrite ^(/cloud/core/doc/[^\/]+/)$ $1/index.html;
 	location /cloud/ {
 		alias /usr/local/lib/owncloud/;
-		location ~ ^/(data|config|\.ht|db_structure\.xml|README) {
-			deny all;
+	 	location ~ ^/cloud/(build|tests|config|lib|3rdparty|templates|data|README)/ {
+	 		deny all;
+	 	}
+	 	location ~ ^/cloud/(?:\.|autotest|occ|issue|indie|db_|console) {
+	 		deny all;
 	 	}
 	}
 	location ~ ^(/cloud)((?:/ocs)?/[^/]+\.php)(/.*)?$ {

conf/zpush/backend_caldav.php

@@ -6,7 +6,7 @@
 ************************************************/
 
 define('CALDAV_PROTOCOL', 'https');
-define('CALDAV_SERVER', 'localhost');
+define('CALDAV_SERVER', '127.0.0.1');
 define('CALDAV_PORT', '443');
 define('CALDAV_PATH', '/caldav/calendars/%u/');
 define('CALDAV_PERSONAL', 'PRINCIPAL');

conf/zpush/backend_carddav.php

@@ -7,7 +7,7 @@
 
 
 define('CARDDAV_PROTOCOL', 'https'); /* http or https */
-define('CARDDAV_SERVER', 'localhost');
+define('CARDDAV_SERVER', '127.0.0.1');
 define('CARDDAV_PORT', '443');
 define('CARDDAV_PATH', '/carddav/addressbooks/%u/');
 define('CARDDAV_DEFAULT_PATH', '/carddav/addressbooks/%u/contacts/'); /* subdirectory of the main path */

conf/zpush/backend_imap.php

@@ -5,7 +5,7 @@
 * Descr     :   IMAP backend configuration file
 ************************************************/
 
-define('IMAP_SERVER', 'localhost');
+define('IMAP_SERVER', '127.0.0.1');
 define('IMAP_PORT', 993);
 define('IMAP_OPTIONS', '/ssl/norsh/novalidate-cert');
 define('IMAP_DEFAULTFROM', '');
@@ -44,7 +44,7 @@ define('IMAP_FROM_LDAP_FROM', '#givenname #sn <#mail>');
 define('IMAP_SMTP_METHOD', 'sendmail');
 
 global $imap_smtp_params;
-$imap_smtp_params = array('host' => 'ssl://localhost', 'port' => 587, 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password');
+$imap_smtp_params = array('host' => 'ssl://127.0.0.1', 'port' => 587, 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password');
 
 define('MAIL_MIMEPART_CRLF', "\r\n");
 

management/backup.py

@@ -2,9 +2,10 @@
 
 # This script performs a backup of all user data:
 # 1) System services are stopped.
-# 2) An incremental encrypted backup is made using duplicity.
-# 3) The stopped services are restarted.
-# 4) STORAGE_ROOT/backup/after-backup is executd if it exists.
+# 2) STORAGE_ROOT/backup/before-backup is executed if it exists.
+# 3) An incremental encrypted backup is made using duplicity.
+# 4) The stopped services are restarted.
+# 5) STORAGE_ROOT/backup/after-backup is executed if it exists.
 
 import os, os.path, shutil, glob, re, datetime, sys
 import dateutil.parser, dateutil.relativedelta, dateutil.tz
@@ -258,6 +259,15 @@ def perform_backup(full_backup):
 	service_command("postfix", "stop", quit=True)
 	service_command("dovecot", "stop", quit=True)
 
+	# Execute a pre-backup script that copies files outside the homedir.
+	# Run as the STORAGE_USER user, not as root. Pass our settings in
+	# environment variables so the script has access to STORAGE_ROOT.
+	pre_script = os.path.join(backup_root, 'before-backup')
+	if os.path.exists(pre_script):
+		shell('check_call',
+			['su', env['STORAGE_USER'], '-c', pre_script, config["target"]],
+			env=env)
+
 	# Run a backup of STORAGE_ROOT (but excluding the backups themselves!).
 	# --allow-source-mismatch is needed in case the box's hostname is changed
 	# after the first backup. See #396.

management/daemon.py

@@ -1,22 +1,17 @@
 #!/usr/bin/python3
 
-import os, os.path, re, json
+import os, os.path, re, json, time
+import subprocess
 
 from functools import wraps
 
-from flask import Flask, request, render_template, abort, Response, send_from_directory
+from flask import Flask, request, render_template, abort, Response, send_from_directory, make_response
 
-import auth, utils
+import auth, utils, multiprocessing.pool
 from mailconfig import get_mail_users, get_mail_users_ex, get_admins, add_mail_user, set_mail_password, remove_mail_user
 from mailconfig import get_mail_user_privileges, add_remove_mail_user_privilege
 from mailconfig import get_mail_aliases, get_mail_aliases_ex, get_mail_domains, add_mail_alias, remove_mail_alias
 
-# Create a worker pool for the status checks. The pool should
-# live across http requests so we don't baloon the system with
-# processes.
-import multiprocessing.pool
-pool = multiprocessing.pool.Pool(processes=5)
-
 env = utils.load_environment()
 
 auth_service = auth.KeyAuthService()
@@ -49,7 +44,10 @@ def authorized_personnel_only(viewfunc):
 		except ValueError as e:
 			# Authentication failed.
 			privs = []
-			error = str(e)
+			error = "Incorrect username or password"
+
+			# Write a line in the log recording the failed login
+			log_failed_login(request)
 
 		# Authorized to access an API view?
 		if "admin" in privs:
@@ -123,9 +121,12 @@ def me():
 	try:
 		email, privs = auth_service.authenticate(request, env)
 	except ValueError as e:
+		# Log the failed login
+		log_failed_login(request)
+
 		return json_response({
 			"status": "invalid",
-			"reason": str(e),
+			"reason": "Incorrect username or password",
 			})
 
 	resp = {
@@ -436,7 +437,10 @@ def system_status():
 		def print_line(self, message, monospace=False):
 			self.items[-1]["extra"].append({ "text": message, "monospace": monospace })
 	output = WebOutput()
+	# Create a temporary pool of processes for the status checks
+	pool = multiprocessing.pool.Pool(processes=5)
 	run_checks(False, env, output, pool)
+	pool.terminate()
 	return json_response(output.items)
 
 @app.route('/system/updates')
@@ -456,6 +460,27 @@ def do_updates():
 		"DEBIAN_FRONTEND": "noninteractive"
 	})
 
+
+@app.route('/system/reboot', methods=["GET"])
+@authorized_personnel_only
+def needs_reboot():
+	from status_checks import is_reboot_needed_due_to_package_installation
+	if is_reboot_needed_due_to_package_installation():
+		return json_response(True)
+	else:
+		return json_response(False)
+
+@app.route('/system/reboot', methods=["POST"])
+@authorized_personnel_only
+def do_reboot():
+	# To keep the attack surface low, we don't allow a remote reboot if one isn't necessary.
+	from status_checks import is_reboot_needed_due_to_package_installation
+	if is_reboot_needed_due_to_package_installation():
+		return utils.shell("check_output", ["/sbin/shutdown", "-r", "now"], capture_stderr=True)
+	else:
+		return "No reboot is required, so it is not allowed."
+
+
 @app.route('/system/backup/status')
 @authorized_personnel_only
 def backup_status():
@@ -507,6 +532,80 @@ def munin(filename=""):
 	if filename == "": filename = "index.html"
 	return send_from_directory("/var/cache/munin/www", filename)
 
+@app.route('/munin/cgi-graph/<path:filename>')
+@authorized_personnel_only
+def munin_cgi(filename):
+	""" Relay munin cgi dynazoom requests
+	/usr/lib/munin/cgi/munin-cgi-graph is a perl cgi script in the munin package
+	that is responsible for generating binary png images _and_ associated HTTP
+	headers based on parameters in the requesting URL. All output is written
+	to stdout which munin_cgi splits into response headers and binary response
+	data.
+	munin-cgi-graph reads environment variables as well as passed input to determine
+	what it should do. It expects a path to be in the env-var PATH_INFO, and a
+	querystring to be in the env-var QUERY_STRING as well as passed as input to the
+	command.
+	munin-cgi-graph has several failure modes. Some write HTTP Status headers and
+	others return nonzero exit codes.
+	Situating munin_cgi between the user-agent and munin-cgi-graph enables keeping
+	the cgi script behind mailinabox's auth mechanisms and avoids additional
+	support infrastructure like spawn-fcgi.
+	"""
+
+	COMMAND = 'su - munin --preserve-environment --shell=/bin/bash -c /usr/lib/munin/cgi/munin-cgi-graph "%s"'
+	# su changes user, we use the munin user here
+	# --preserve-environment retains the environment, which is where Popen's `env` data is
+	# --shell=/bin/bash ensures the shell used is bash
+	# -c "/usr/lib/munin/cgi/munin-cgi-graph" passes the command to run as munin
+	# "%s" is a placeholder for where the request's querystring will be added
+
+	if filename == "":
+		return ("a path must be specified", 404)
+
+	query_str = request.query_string.decode("utf-8", 'ignore')
+
+	env = {'PATH_INFO': '/%s/' % filename, 'QUERY_STRING': query_str}
+	cmd = COMMAND % query_str
+	code, binout = utils.shell('check_output',
+							   cmd.split(' ', 5),
+							   # Using a maxsplit of 5 keeps the last 2 arguments together
+							   input=query_str.encode('UTF-8'),
+							   env=env,
+							   return_bytes=True,
+							   trap=True)
+
+	if code != 0:
+		# nonzero returncode indicates error
+		app.logger.error("munin_cgi: munin-cgi-graph returned nonzero exit code, %s", process.returncode)
+		return ("error processing graph image", 500)
+
+	# /usr/lib/munin/cgi/munin-cgi-graph returns both headers and binary png when successful.
+	# A double-Windows-style-newline always indicates the end of HTTP headers.
+	headers, image_bytes = binout.split(b'\r\n\r\n', 1)
+	response = make_response(image_bytes)
+	for line in headers.splitlines():
+		name, value = line.decode("utf8").split(':', 1)
+		response.headers[name] = value
+	if 'Status' in response.headers and '404' in response.headers['Status']:
+		app.logger.warning("munin_cgi: munin-cgi-graph returned 404 status code. PATH_INFO=%s", env['PATH_INFO'])
+	return response
+
+def log_failed_login(request):
+	# We need to figure out the ip to list in the message, all our calls are routed
+	# through nginx who will put the original ip in X-Forwarded-For.
+	# During setup we call the management interface directly to determine the user
+	# status. So we can't always use X-Forwarded-For because during setup that header
+	# will not be present.
+	if request.headers.getlist("X-Forwarded-For"):
+		ip = request.headers.getlist("X-Forwarded-For")[0]
+	else:
+		ip = request.remote_addr
+
+	# We need to add a timestamp to the log message, otherwise /dev/log will eat the "duplicate"
+	# message.
+	app.logger.warning( "Mail-in-a-Box Management Daemon: Failed login attempt from ip %s - timestamp %s" % (ip, time.time()))
+
+
 # APP
 
 if __name__ == '__main__':

management/dns_update.py

@@ -175,9 +175,6 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 		for value in build_sshfp_records():
 			records.append((None, "SSHFP", value, "Optional. Provides an out-of-band method for verifying an SSH key before connecting. Use 'VerifyHostKeyDNS yes' (or 'VerifyHostKeyDNS ask') when connecting with ssh."))
 
-	# The MX record says where email for the domain should be delivered: Here!
-	records.append((None,  "MX",  "10 %s." % env["PRIMARY_HOSTNAME"], "Required. Specifies the hostname (and priority) of the machine that handles @%s mail." % domain))
-
 	# Add DNS records for any subdomains of this domain. We should not have a zone for
 	# both a domain and one of its subdomains.
 	subdomains = [d for d in all_domains if d.endswith("." + domain)]
@@ -244,6 +241,10 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 	# Don't pin the list of records that has_rec checks against anymore.
 	has_rec_base = records
 
+	# The MX record says where email for the domain should be delivered: Here!
+	if not has_rec(None, "MX", prefix="10 "):
+		records.append((None,  "MX",  "10 %s." % env["PRIMARY_HOSTNAME"], "Required. Specifies the hostname (and priority) of the machine that handles @%s mail." % domain))
+
 	# SPF record: Permit the box ('mx', see above) to send mail on behalf of
 	# the domain, and no one else.
 	# Skip if the user has set a custom SPF record.
@@ -273,6 +274,13 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 		if not has_rec(dmarc_qname, "TXT", prefix="v=DMARC1; "):
 			records.append((dmarc_qname, "TXT", 'v=DMARC1; p=reject', "Recommended. Prevents use of this domain name for outbound mail by specifying that the SPF rule should be honoured for mail from @%s." % (qname + "." + domain)))
 
+	# Add CardDAV/CalDAV SRV records on the non-primary hostname that points to the primary hostname.
+	# The SRV record format is priority (0, whatever), weight (0, whatever), port, service provider hostname (w/ trailing dot).
+	if domain != env["PRIMARY_HOSTNAME"]:
+		for dav in ("card", "cal"):
+			qname = "_" + dav + "davs._tcp"
+			if not has_rec(qname, "SRV"):
+				records.append((qname, "SRV", "0 0 443 " + env["PRIMARY_HOSTNAME"] + ".", "Recommended. Specifies the hostname of the server that handles CardDAV/CalDAV services for email addresses on this domain."))
 
 	# Sort the records. The None records *must* go first in the nsd zone file. Otherwise it doesn't matter.
 	records.sort(key = lambda rec : list(reversed(rec[0].split(".")) if rec[0] is not None else ""))

management/email_administrator.py

@@ -33,7 +33,7 @@ msg['Subject'] = "[%s] %s" % (env['PRIMARY_HOSTNAME'], subject)
 msg.set_payload(content, "UTF-8")
 
 # send
-smtpclient = smtplib.SMTP('localhost', 25)
+smtpclient = smtplib.SMTP('127.0.0.1', 25)
 smtpclient.ehlo()
 smtpclient.sendmail(
         admin_addr, # MAIL FROM

management/mail_log.py

@@ -1,136 +1,211 @@
 #!/usr/bin/python3
 
+import os.path
+import re
 from collections import defaultdict
-import re, os.path
+
 import dateutil.parser
 
 import mailconfig
 import utils
 
+
 def scan_mail_log(logger, env):
-	collector = {
-		"other-services": set(),
-		"imap-logins": { },
-		"postgrey": { },
-		"rejected-mail": { },
-		"activity-by-hour": { "imap-logins": defaultdict(int), "smtp-sends": defaultdict(int) },
-	}
+    """ Scan the system's mail log files and collect interesting data
 
-	collector["real_mail_addresses"] = set(mailconfig.get_mail_users(env)) | set(alias[0] for alias in mailconfig.get_mail_aliases(env))
+    This function scans the 2 most recent mail log files in /var/log/.
 
-	for fn in ('/var/log/mail.log.1', '/var/log/mail.log'):
-		if not os.path.exists(fn): continue
-		with open(fn, 'rb') as log:
-			for line in log:
-				line = line.decode("utf8", errors='replace')
-				scan_mail_log_line(line.strip(), collector)
+    Args:
+        logger (ConsoleOutput): Object used for writing messages to the console
+        env (dict): Dictionary containing MiaB settings
+    """
 
-	if collector["imap-logins"]:
-		logger.add_heading("Recent IMAP Logins")
-		logger.print_block("The most recent login from each remote IP adddress is show.")
-		for k in utils.sort_email_addresses(collector["imap-logins"], env):
-			for ip, date in sorted(collector["imap-logins"][k].items(), key = lambda kv : kv[1]):
-				logger.print_line(k + "\t" + str(date) + "\t" + ip)
+    collector = {
+        "other-services": set(),
+        "imap-logins": {},
+        "pop3-logins": {},
+        "postgrey": {},
+        "rejected-mail": {},
+        "activity-by-hour": {
+            "imap-logins": defaultdict(int),
+            "pop3-logins": defaultdict(int),
+            "smtp-sends": defaultdict(int),
+            "smtp-receives": defaultdict(int),
+        },
+        "real_mail_addresses": (
+            set(mailconfig.get_mail_users(env)) | set(alias[0] for alias in mailconfig.get_mail_aliases(env))
+        )
+    }
 
-	if collector["postgrey"]:
-		logger.add_heading("Greylisted Mail")
-		logger.print_block("The following mail was greylisted, meaning the emails were temporarily rejected. Legitimate senders will try again within ten minutes.")
-		logger.print_line("recipient" + "\t" + "received" + "\t" + "sender" + "\t" + "delivered")
-		for recipient in utils.sort_email_addresses(collector["postgrey"], env):
-			for (client_address, sender), (first_date, delivered_date) in sorted(collector["postgrey"][recipient].items(), key = lambda kv : kv[1][0]):
-				logger.print_line(recipient + "\t" + str(first_date) + "\t" + sender + "\t" + (("delivered " + str(delivered_date)) if delivered_date else "no retry yet"))
+    for fn in ('/var/log/mail.log.1', '/var/log/mail.log'):
+        if not os.path.exists(fn):
+            continue
+        with open(fn, 'rb') as log:
+            for line in log:
+                line = line.decode("utf8", errors='replace')
+                scan_mail_log_line(line.strip(), collector)
 
-	if collector["rejected-mail"]:
-		logger.add_heading("Rejected Mail")
-		logger.print_block("The following incoming mail was rejected.")
-		for k in utils.sort_email_addresses(collector["rejected-mail"], env):
-			for date, sender, message in collector["rejected-mail"][k]:
-				logger.print_line(k + "\t" + str(date) + "\t" + sender + "\t" + message)
+    if collector["imap-logins"]:
+        logger.add_heading("Recent IMAP Logins")
+        logger.print_block("The most recent login from each remote IP adddress is shown.")
+        for k in utils.sort_email_addresses(collector["imap-logins"], env):
+            for ip, date in sorted(collector["imap-logins"][k].items(), key=lambda kv: kv[1]):
+                logger.print_line(k + "\t" + str(date) + "\t" + ip)
 
-	logger.add_heading("Activity by Hour")
-	for h in range(24):
-		logger.print_line("%d\t%d\t%d" % (h, collector["activity-by-hour"]["imap-logins"][h], collector["activity-by-hour"]["smtp-sends"][h] ))
+    if collector["pop3-logins"]:
+        logger.add_heading("Recent POP3 Logins")
+        logger.print_block("The most recent login from each remote IP adddress is shown.")
+        for k in utils.sort_email_addresses(collector["pop3-logins"], env):
+            for ip, date in sorted(collector["pop3-logins"][k].items(), key=lambda kv: kv[1]):
+                logger.print_line(k + "\t" + str(date) + "\t" + ip)
+
+    if collector["postgrey"]:
+        logger.add_heading("Greylisted Mail")
+        logger.print_block("The following mail was greylisted, meaning the emails were temporarily rejected. "
+                           "Legitimate senders will try again within ten minutes.")
+        logger.print_line("recipient" + "\t" + "received" + 3 * "\t" + "sender" + 6 * "\t" + "delivered")
+        for recipient in utils.sort_email_addresses(collector["postgrey"], env):
+            sorted_recipients = sorted(collector["postgrey"][recipient].items(), key=lambda kv: kv[1][0])
+            for (client_address, sender), (first_date, delivered_date) in sorted_recipients:
+                logger.print_line(
+                    recipient + "\t" + str(first_date) + "\t" + sender + "\t" +
+                    (("delivered " + str(delivered_date)) if delivered_date else "no retry yet")
+                )
+
+    if collector["rejected-mail"]:
+        logger.add_heading("Rejected Mail")
+        logger.print_block("The following incoming mail was rejected.")
+        for k in utils.sort_email_addresses(collector["rejected-mail"], env):
+            for date, sender, message in collector["rejected-mail"][k]:
+                logger.print_line(k + "\t" + str(date) + "\t" + sender + "\t" + message)
+
+    logger.add_heading("Activity by Hour")
+    logger.print_block("Dovecot logins and Postfix mail traffic per hour.")
+    logger.print_block("Hour\tIMAP\tPOP3\tSent\tReceived")
+    for h in range(24):
+        logger.print_line(
+            "%d\t%d\t\t%d\t\t%d\t\t%d" % (
+                h,
+                collector["activity-by-hour"]["imap-logins"][h],
+                collector["activity-by-hour"]["pop3-logins"][h],
+                collector["activity-by-hour"]["smtp-sends"][h],
+                collector["activity-by-hour"]["smtp-receives"][h],
+            )
+        )
+
+    if len(collector["other-services"]) > 0:
+        logger.add_heading("Other")
+        logger.print_block("Unrecognized services in the log: " + ", ".join(collector["other-services"]))
 
-	if len(collector["other-services"]) > 0:
-		logger.add_heading("Other")
-		logger.print_block("Unrecognized services in the log: " + ", ".join(collector["other-services"]))
 
 def scan_mail_log_line(line, collector):
-	m = re.match(r"(\S+ \d+ \d+:\d+:\d+) (\S+) (\S+?)(\[\d+\])?: (.*)", line)
-	if not m: return
+    """ Scan a log line and extract interesting data """
 
-	date, system, service, pid, log = m.groups()
-	date = dateutil.parser.parse(date)
-	
-	if service == "dovecot":
-		scan_dovecot_line(date, log, collector)
+    m = re.match(r"(\S+ \d+ \d+:\d+:\d+) (\S+) (\S+?)(\[\d+\])?: (.*)", line)
 
-	elif service == "postgrey":
-		scan_postgrey_line(date, log, collector)
+    if not m:
+        return
 
-	elif service == "postfix/smtpd":
-		scan_postfix_smtpd_line(date, log, collector)
+    date, system, service, pid, log = m.groups()
+    date = dateutil.parser.parse(date)
 
-	elif service == "postfix/submission/smtpd":
-		scan_postfix_submission_line(date, log, collector)
+    if service == "dovecot":
+        scan_dovecot_line(date, log, collector)
+    elif service == "postgrey":
+        scan_postgrey_line(date, log, collector)
+    elif service == "postfix/smtpd":
+        scan_postfix_smtpd_line(date, log, collector)
+    elif service == "postfix/cleanup":
+        scan_postfix_cleanup_line(date, log, collector)
+    elif service == "postfix/submission/smtpd":
+        scan_postfix_submission_line(date, log, collector)
+    elif service in ("postfix/qmgr", "postfix/pickup", "postfix/cleanup", "postfix/scache", "spampd", "postfix/anvil",
+                     "postfix/master", "opendkim", "postfix/lmtp", "postfix/tlsmgr"):
+        # nothing to look at
+        pass
+    else:
+        collector["other-services"].add(service)
 
-	elif service in ("postfix/qmgr", "postfix/pickup", "postfix/cleanup",
-			"postfix/scache", "spampd", "postfix/anvil", "postfix/master",
-			"opendkim", "postfix/lmtp", "postfix/tlsmgr"):
-		# nothing to look at
-		pass
 
-	else:
-		collector["other-services"].add(service)
+def scan_dovecot_line(date, line, collector):
+    """ Scan a dovecot log line and extract interesting data """
+
+    m = re.match("(imap|pop3)-login: Login: user=<(.*?)>, method=PLAIN, rip=(.*?),", line)
+
+    if m:
+        prot, login, ip = m.group(1), m.group(2), m.group(3)
+        logins_key = "%s-logins" % prot
+        if ip != "127.0.0.1":  # local login from webmail/zpush
+            collector[logins_key].setdefault(login, {})[ip] = date
+        collector["activity-by-hour"][logins_key][date.hour] += 1
 
-def scan_dovecot_line(date, log, collector):
-	m = re.match("imap-login: Login: user=<(.*?)>, method=PLAIN, rip=(.*?),", log)
-	if m:
-		login, ip = m.group(1), m.group(2)
-		if ip != "127.0.0.1": # local login from webmail/zpush
-			collector["imap-logins"].setdefault(login, {})[ip] = date
-		collector["activity-by-hour"]["imap-logins"][date.hour] += 1
 
 def scan_postgrey_line(date, log, collector):
-	m = re.match("action=(greylist|pass), reason=(.*?), (?:delay=\d+, )?client_name=(.*), client_address=(.*), sender=(.*), recipient=(.*)", log)
-	if m:
-		action, reason, client_name, client_address, sender, recipient = m.groups()
-		key = (client_address, sender)
-		if action == "greylist" and reason == "new":
-			collector["postgrey"].setdefault(recipient, {})[key] = (date, None)
-		elif action == "pass" and reason == "triplet found" and key in collector["postgrey"].get(recipient, {}):
-			collector["postgrey"][recipient][key] = (collector["postgrey"][recipient][key][0], date)
+    """ Scan a postgrey log line and extract interesting data """
+
+    m = re.match("action=(greylist|pass), reason=(.*?), (?:delay=\d+, )?client_name=(.*), client_address=(.*), "
+                 "sender=(.*), recipient=(.*)",
+                 log)
+
+    if m:
+        action, reason, client_name, client_address, sender, recipient = m.groups()
+        key = (client_address, sender)
+        if action == "greylist" and reason == "new":
+            collector["postgrey"].setdefault(recipient, {})[key] = (date, None)
+        elif action == "pass" and reason == "triplet found" and key in collector["postgrey"].get(recipient, {}):
+            collector["postgrey"][recipient][key] = (collector["postgrey"][recipient][key][0], date)
+
 
 def scan_postfix_smtpd_line(date, log, collector):
-	m = re.match("NOQUEUE: reject: RCPT from .*?: (.*?); from=<(.*?)> to=<(.*?)>", log)
-	if m:
-		message, sender, recipient = m.groups()
-		if recipient in collector["real_mail_addresses"]:
-			# only log mail to real recipients
+    """ Scan a postfix smtpd log line and extract interesting data """
 
-			# skip this, is reported in the greylisting report
-			if "Recipient address rejected: Greylisted" in message:
-				return
+    # Check if the incomming mail was rejected
 
-			# simplify this one
-			m = re.search(r"Client host \[(.*?)\] blocked using zen.spamhaus.org; (.*)", message)
-			if m:
-				message = "ip blocked: " + m.group(2)
+    m = re.match("NOQUEUE: reject: RCPT from .*?: (.*?); from=<(.*?)> to=<(.*?)>", log)
 
-			# simplify this one too
-			m = re.search(r"Sender address \[.*@(.*)\] blocked using dbl.spamhaus.org; (.*)", message)
-			if m:
-				message = "domain blocked: " + m.group(2)
+    if m:
+        message, sender, recipient = m.groups()
+        if recipient in collector["real_mail_addresses"]:
+            # only log mail to real recipients
 
-			collector["rejected-mail"].setdefault(recipient, []).append( (date, sender, message) )
+            # skip this, if reported in the greylisting report
+            if "Recipient address rejected: Greylisted" in message:
+                return
+
+            # simplify this one
+            m = re.search(r"Client host \[(.*?)\] blocked using zen.spamhaus.org; (.*)", message)
+            if m:
+                message = "ip blocked: " + m.group(2)
+
+            # simplify this one too
+            m = re.search(r"Sender address \[.*@(.*)\] blocked using dbl.spamhaus.org; (.*)", message)
+            if m:
+                message = "domain blocked: " + m.group(2)
+
+            collector["rejected-mail"].setdefault(recipient, []).append((date, sender, message))
+
+
+def scan_postfix_cleanup_line(date, _, collector):
+    """ Scan a postfix cleanup log line and extract interesting data
+
+    It is assumed that every log of postfix/cleanup indicates an email that was successfulfy received by Postfix.
+
+    """
+
+    collector["activity-by-hour"]["smtp-receives"][date.hour] += 1
 
 def scan_postfix_submission_line(date, log, collector):
-	m = re.match("([A-Z0-9]+): client=(\S+), sasl_method=PLAIN, sasl_username=(\S+)", log)
-	if m:
-		procid, client, user = m.groups()
-		collector["activity-by-hour"]["smtp-sends"][date.hour] += 1
+    """ Scan a postfix submission log line and extract interesting data """
+
+    m = re.match("([A-Z0-9]+): client=(\S+), sasl_method=PLAIN, sasl_username=(\S+)", log)
+
+    if m:
+        # procid, client, user = m.groups()
+        collector["activity-by-hour"]["smtp-sends"][date.hour] += 1
+
 
 if __name__ == "__main__":
-	from status_checks import ConsoleOutput
-	env = utils.load_environment()
-	scan_mail_log(ConsoleOutput(), env)
+    from status_checks import ConsoleOutput
+
+    env_vars = utils.load_environment()
+    scan_mail_log(ConsoleOutput(), env_vars)

management/mailconfig.py

@@ -137,19 +137,20 @@ def get_mail_users_ex(env, with_archived=False, with_slow_info=False):
 	if with_archived:
 		root = os.path.join(env['STORAGE_ROOT'], 'mail/mailboxes')
 		for domain in os.listdir(root):
-			for user in os.listdir(os.path.join(root, domain)):
-				email = user + "@" + domain
-				mbox = os.path.join(root, domain, user)
-				if email in active_accounts: continue
-				user = {
-					"email": email,
-					"privileges": "",
-					"status": "inactive",
-					"mailbox": mbox,
-				}
-				users.append(user)
-				if with_slow_info:
-					user["mailbox_size"] = utils.du(mbox)
+			if os.path.isdir(os.path.join(root, domain)):
+				for user in os.listdir(os.path.join(root, domain)):
+					email = user + "@" + domain
+					mbox = os.path.join(root, domain, user)
+					if email in active_accounts: continue
+					user = {
+						"email": email,
+						"privileges": "",
+						"status": "inactive",
+						"mailbox": mbox,
+					}
+					users.append(user)
+					if with_slow_info:
+						user["mailbox_size"] = utils.du(mbox)
 
 	# Group by domain.
 	domains = { }

management/ssl_certificates.py

@@ -365,7 +365,7 @@ def provision_certificates(env, agree_to_tos_url=None, logger=None, show_extende
 				"message": "Something unexpected went wrong. It looks like your local Let's Encrypt account data is corrupted. There was a problem with the file " + e.account_file_path + ".",
 			})
 
-		except (client.InvalidDomainName, client.NeedToTakeAction, client.ChallengeFailed, acme.messages.Error, requests.exceptions.RequestException) as e:
+		except (client.InvalidDomainName, client.NeedToTakeAction, client.ChallengeFailed, client.RateLimited, acme.messages.Error, requests.exceptions.RequestException) as e:
 			ret_item.update({
 				"result": "error",
 				"message": "Something unexpected went wrong: " + str(e),

management/status_checks.py

@@ -18,6 +18,29 @@ from mailconfig import get_mail_domains, get_mail_aliases
 
 from utils import shell, sort_domains, load_env_vars_from_file, load_settings
 
+def get_services():
+	return [
+		{ "name": "Local DNS (bind9)", "port": 53, "public": False, },
+		#{ "name": "NSD Control", "port": 8952, "public": False, },
+		{ "name": "Local DNS Control (bind9/rndc)", "port": 953, "public": False, },
+		{ "name": "Dovecot LMTP LDA", "port": 10026, "public": False, },
+		{ "name": "Postgrey", "port": 10023, "public": False, },
+		{ "name": "Spamassassin", "port": 10025, "public": False, },
+		{ "name": "OpenDKIM", "port": 8891, "public": False, },
+		{ "name": "OpenDMARC", "port": 8893, "public": False, },
+		{ "name": "Memcached", "port": 11211, "public": False, },
+		{ "name": "Mail-in-a-Box Management Daemon", "port": 10222, "public": False, },
+		{ "name": "SSH Login (ssh)", "port": get_ssh_port(), "public": True, },
+		{ "name": "Public DNS (nsd4)", "port": 53, "public": True, },
+		{ "name": "Incoming Mail (SMTP/postfix)", "port": 25, "public": True, },
+		{ "name": "Outgoing Mail (SMTP 587/postfix)", "port": 587, "public": True, },
+		#{ "name": "Postfix/master", "port": 10587, "public": True, },
+		{ "name": "IMAPS (dovecot)", "port": 993, "public": True, },
+		{ "name": "Mail Filters (Sieve/dovecot)", "port": 4190, "public": True, },
+		{ "name": "HTTP Web (nginx)", "port": 80, "public": True, },
+		{ "name": "HTTPS Web (nginx)", "port": 443, "public": True, },
+	]
+
 def run_checks(rounded_values, env, output, pool):
 	# run systems checks
 	output.add_heading("System")
@@ -61,33 +84,9 @@ def get_ssh_port():
 
 def run_services_checks(env, output, pool):
 	# Check that system services are running.
-
-	services = [
-		{ "name": "Local DNS (bind9)", "port": 53, "public": False, },
-		#{ "name": "NSD Control", "port": 8952, "public": False, },
-		{ "name": "Local DNS Control (bind9/rndc)", "port": 953, "public": False, },
-		{ "name": "Dovecot LMTP LDA", "port": 10026, "public": False, },
-		{ "name": "Postgrey", "port": 10023, "public": False, },
-		{ "name": "Spamassassin", "port": 10025, "public": False, },
-		{ "name": "OpenDKIM", "port": 8891, "public": False, },
-		{ "name": "OpenDMARC", "port": 8893, "public": False, },
-		{ "name": "Memcached", "port": 11211, "public": False, },
-		{ "name": "Mail-in-a-Box Management Daemon", "port": 10222, "public": False, },
-
-		{ "name": "SSH Login (ssh)", "port": get_ssh_port(), "public": True, },
-		{ "name": "Public DNS (nsd4)", "port": 53, "public": True, },
-		{ "name": "Incoming Mail (SMTP/postfix)", "port": 25, "public": True, },
-		{ "name": "Outgoing Mail (SMTP 587/postfix)", "port": 587, "public": True, },
-		#{ "name": "Postfix/master", "port": 10587, "public": True, },
-		{ "name": "IMAPS (dovecot)", "port": 993, "public": True, },
-		{ "name": "Mail Filters (Sieve/dovecot)", "port": 4190, "public": True, },
-		{ "name": "HTTP Web (nginx)", "port": 80, "public": True, },
-		{ "name": "HTTPS Web (nginx)", "port": 443, "public": True, },
-	]
-
 	all_running = True
 	fatal = False
-	ret = pool.starmap(check_service, ((i, service, env) for i, service in enumerate(services)), chunksize=1)
+	ret = pool.starmap(check_service, ((i, service, env) for i, service in enumerate(get_services())), chunksize=1)
 	for i, running, fatal2, output2 in sorted(ret):
 		if output2 is None: continue # skip check (e.g. no port was set, e.g. no sshd)
 		all_running = all_running and running
@@ -169,6 +168,26 @@ def run_system_checks(rounded_values, env, output):
 	check_free_disk_space(rounded_values, env, output)
 	check_free_memory(rounded_values, env, output)
 
+def check_ufw(env, output):
+	ufw = shell('check_output', ['ufw', 'status']).splitlines()
+
+	if ufw[0] == "Status: active":
+		not_allowed_ports = 0
+		for service in get_services():
+			if service["public"] and not is_port_allowed(ufw, service["port"]):
+				not_allowed_ports += 1
+				output.print_error("Port %s (%s) should be allowed in the firewall, please re-run the setup." % (service["port"], service["name"]))
+
+		if not_allowed_ports == 0:
+			output.print_ok("Firewall is active.")
+	else:
+		output.print_warning("""The firewall is disabled on this machine. This might be because the system
+			is protected by an external firewall. We can't protect the system against bruteforce attacks
+			without the local firewall active. Connect to the system via ssh and try to run: ufw enable.""")
+
+def is_port_allowed(ufw, port):
+	return any(re.match(str(port) +"[/ \t].*", item) for item in ufw)
+
 def check_ssh_password(env, output):
 	# Check that SSH login with password is disabled. The openssh-server
 	# package may not be installed so check that before trying to access
@@ -185,10 +204,13 @@ def check_ssh_password(env, output):
 	else:
 		output.print_ok("SSH disallows password-based login.")
 
+def is_reboot_needed_due_to_package_installation():
+	return os.path.exists("/var/run/reboot-required")
+
 def check_software_updates(env, output):
 	# Check for any software package updates.
 	pkgs = list_apt_updates(apt_update=False)
-	if os.path.exists("/var/run/reboot-required"):
+	if is_reboot_needed_due_to_package_installation():
 		output.print_error("System updates have been installed and a reboot of the machine is required.")
 	elif len(pkgs) == 0:
 		output.print_ok("System software is up to date.")
@@ -237,6 +259,8 @@ def run_network_checks(env, output):
 
 	output.add_heading("Network")
 
+	check_ufw(env, output)
+
 	# Stop if we cannot make an outbound connection on port 25. Many residential
 	# networks block outbound port 25 to prevent their network from sending spam.
 	# See if we can reach one of Google's MTAs with a 5-second timeout.

management/templates/aliases.html

@@ -106,6 +106,41 @@
   </table>
 </div>
 
+<h3>Mail aliases API (advanced)</h3>
+
+<p>Use your box&rsquo;s mail aliases API to add and remove mail aliases from the command-line or custom services you build.</p>
+
+<p>Usage:</p>
+
+<pre>curl -X <b>VERB</b> [-d "<b>parameters</b>"] --user {email}:{password} https://{{hostname}}/admin/mail/aliases[<b>action</b>]</pre>
+
+<p>Brackets denote an optional argument. Please note that the POST body <code>parameters</code> must be URL-encoded.</p>
+
+<p>The email and password given to the <code>--user</code> option must be an administrative user on this system.</p>
+
+<h4 style="margin-bottom: 0">Verbs</h4>
+
+<table class="table" style="margin-top: .5em">
+<thead><th>Verb</th> <th>Action</th><th></th></thead>
+<tr><td>GET</td><td><i>(none)</i></td> <td>Returns a list of existing mail aliases. Adding <code>?format=json</code> to the URL will give JSON-encoded results.</td></tr>
+<tr><td>POST</td><td>/add</td> <td>Adds a new mail alias. Required POST-body parameters are <code>address</code> and <code>forward_to</code>.</td></tr>
+<tr><td>POST</td><td>/remove</td> <td>Removes a mail alias. Required POST-body parameter is <code>address</code>.</td></tr>
+</table>
+
+<h4>Examples:</h4>
+
+<p>Try these examples. For simplicity the examples omit the <code>--user me@mydomain.com:yourpassword</code> command line argument which you must fill in with your email address and password.</p>
+
+<pre># Gives a JSON-encoded list of all mail aliases
+curl -X GET https://{{hostname}}/admin/mail/aliases?format=json
+
+# Adds a new alias
+curl -X POST -d "address=new_alias@mydomail.com" -d "forward_to=my_email@mydomain.com" https://{{hostname}}/admin/mail/aliases/add
+
+# Removes an alias
+curl -X POST -d "address=new_alias@mydomail.com" https://{{hostname}}/admin/mail/aliases/remove
+</pre>
+
 
 <script>
 function show_aliases() {

management/templates/custom-dns.html

@@ -10,7 +10,7 @@
 
 <p>It is possible to set custom DNS records on domains hosted here.</p>
 
-<h3>Set Custom DNS Records</h3>
+<h3>Set custom DNS records</h3>
 
 <p>You can set additional DNS records, such as if you have a website running on another server, to add DKIM records for external mail providers, or for various confirmation-of-ownership tests.</p>
 
@@ -36,6 +36,7 @@
         <option value="CNAME" data-hint="Enter another domain name followed by a period at the end (e.g. mypage.github.io.).">CNAME (DNS forwarding)</option>
         <option value="TXT" data-hint="Enter arbitrary text.">TXT (text record)</option>
         <option value="MX" data-hint="Enter record in the form of PRIORIY DOMAIN., including trailing period (e.g. 20 mx.example.com.).">MX (mail exchanger)</option>
+        <option value="SRV" data-hint="Enter record in the form of PRIORIY WEIGHT PORT TARGET., including trailing period (e.g. 10 10 5060 sip.example.com.).">SRV (service record)</option>
       </select>
     </div>
   </div>
@@ -65,7 +66,7 @@
   </tbody>
 </table>
 
-<h3>Using a Secondary Nameserver</h3>
+<h3>Using a secondary nameserver</h3>
 
 <p>If your TLD requires you to have two separate nameservers, you can either set up <a href="#" onclick="return show_panel('external_dns')">external DNS</a> and ignore the DNS server on this box entirely, or use the DNS server on this box but add a secondary (aka &ldquo;slave&rdquo;) nameserver.</p>
 <p>If you choose to use a seconday nameserver, you must find a seconday nameserver service provider. Your domain name registrar or virtual cloud provider may provide this service for you. Once you set up the seconday nameserver service, enter the hostname (not the IP address) of <em>their</em> secondary nameserver in the box below.</p>

management/templates/index.html

@@ -9,7 +9,7 @@
 
         <meta name="robots" content="noindex, nofollow">
 
-        <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" integrity="sha256-MfvZlkHCEqatNoGiOXveE8FIwMzZg4W85qfrfIFBfYc=" crossorigin="anonymous">
+        <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/css/bootstrap.min.css" integrity="sha384-1q8mTJOASx8j1Au+a5WDVnPi2lkFfwwEAa8hDDdjZlpLegxhjVME1fgjWPGmkzs7" crossorigin="anonymous">
         <style>
 	    body {
 		overflow-y: scroll;
@@ -63,7 +63,7 @@
 	       margin-bottom: 1em;
 	    }
         </style>
-        <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap-theme.min.css" integrity="sha256-bHQiqcFbnJb1Qhh61RY9cMh6kR0gTuQY6iFOBj1yj00=" crossorigin="anonymous">
+        <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/css/bootstrap-theme.min.css" integrity="sha384-fLW2N01lMqjakBkx3l/M9EahuwpSfeNvV63J5ezn3uZzapT0u7EYsXMjQV+0En5r" crossorigin="anonymous">
     </head>
     <body>
 
@@ -93,7 +93,7 @@
                 <li class="dropdown-header">Advanced Pages</li>
                 <li><a href="#custom_dns" onclick="return show_panel(this);">Custom DNS</a></li>
                 <li><a href="#external_dns" onclick="return show_panel(this);">External DNS</a></li>
-                <li><a href="/admin/munin">Munin Monitoring</a></li>
+                <li><a href="/admin/munin" target="_blank">Munin Monitoring</a></li>
               </ul>
             </li>
             <li class="dropdown">
@@ -192,7 +192,7 @@
         </div>
 
         <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js" integrity="sha256-rsPUGdUPBXgalvIj4YKJrrUlmLXbOb6Cp7cdxn1qeUc=" crossorigin="anonymous"></script>
-        <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js" integrity="sha256-Sk3nkD6mLTMOF0EOpNtsIry+s1CsaqQC1rVLTAy+0yc=" crossorigin="anonymous"></script>
+        <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/js/bootstrap.min.js" integrity="sha384-0mSbJDEHialfmuBBQP6A4Qrprq5OVfW37PRR3j5ELqxss1yVqOtnepnHVP9aJ7xS" crossorigin="anonymous"></script>
 
         <script>
 var global_modal_state = null;

management/templates/ssl.html

@@ -8,7 +8,7 @@
 <p>You need a TLS certificate for this box&rsquo;s hostname ({{hostname}}) and every other domain name and subdomain that this box is hosting a website for (see the list below).</p>
 
 <div id="ssl_provision">
-<h3>Provision a Certificate</h3>
+<h3>Provision a certificate</h3>
 
 <div id="ssl_provision_p" style="display: none; margin-top: 1.5em">
   <button onclick='return provision_tls_cert();' class='btn btn-primary' style="float: left; margin: 0 1.5em 1em 0;">Provision</button>
@@ -36,7 +36,7 @@
 </div>
 </div>
 
-<h3>Certificate Status</h3>
+<h3>Certificate status</h3>
 
 <p style="margin-top: 1.5em">Certificates expire after a period of time. All certificates will be automatically renewed through <a href="https://letsencrypt.org/" target="_blank">Let&rsquo;s Encrypt</a> 14 days prior to expiration.</p>
 
@@ -53,9 +53,9 @@
 </table>
 
 
-<h3 id="ssl_install_header">Install Certificate</h3>
+<h3 id="ssl_install_header">Install certificate</h3>
 
-<p>There are many places where you can get a free or cheap certificate. We recommend <a href="https://www.namecheap.com/security/ssl-certificates/domain-validation.aspx">Namecheap&rsquo;s $9 certificate</a>, <a href="https://www.startssl.com/">StartSSL&rsquo;s free express lane</a> or <a href="https://buy.wosign.com/free/">WoSign&rsquo;s free TLS</a></a>.</p>
+<p>There are many other places where you can get a free or cheap certificate. If you don't want to use our automatic Let's Encrypt integration, you can give <a href="https://www.namecheap.com/security/ssl-certificates/domain-validation.aspx">Namecheap&rsquo;s $9 certificate</a>, <a href="https://www.startssl.com/">StartSSL&rsquo;s free express lane</a>, <a href="https://buy.wosign.com/free/">WoSign&rsquo;s free TLS</a></a> or any other certificate provider a try.</p>
 
 <p>Which domain are you getting a certificate for?</p>
 

management/templates/system-backup.html

@@ -74,7 +74,7 @@
   </div>
 </form>
 
-<h3>Available Backups</h3>
+<h3>Available backups</h3>
 
 <p>The backup location currently contains the backups listed below. The total size of the backups is currently <span id="backup-total-size"></span>.</p>
 

management/templates/system-status.html

@@ -34,19 +34,23 @@
   font-family: monospace;
   white-space: pre-wrap;
 }
-
-#system-privacy-setting {
-  float: right;
-  max-width: 20em;
-  margin-bottom: 1em;
-}
 </style>
 
+<div class="row">
+	<div class="col-md-push-9 col-md-3">
+
+<div id="system-reboot-required" style="display: none; margin-bottom: 1em;">
+	<button type="button" class="btn btn-danger" onclick="confirm_reboot(); return false;">Reboot Box</button>
+	<div>No reboot is necessary.</div>
+</div>
+
 <div id="system-privacy-setting" style="display: none">
 	<div><a onclick="return enable_privacy(!current_privacy_setting)" href="#"><span>Enable/Disable</span> New-Version Check</a></div>
 	<p style="line-height: 125%"><small>(When enabled, status checks phone-home to check for a new release of Mail-in-a-Box.)</small></p>
 </div>
 
+	</div> <!-- /col -->
+	<div class="col-md-pull-3 col-md-8">
 
 <table id="system-checks" class="table" style="max-width: 60em">
   <thead>
@@ -55,6 +59,9 @@
   </tbody>
 </table>
 
+	</div> <!-- /col -->
+</div> <!-- /row -->
+
 <script>
 function show_system_status() {
   $('#system-checks tbody').html("<tr><td colspan='2' class='text-muted'>Loading...</td></tr>")
@@ -70,6 +77,16 @@ function show_system_status() {
       $('#system-privacy-setting p').toggle(r);
     });
 
+  api(
+    "/system/reboot",
+    "GET",
+    { },
+    function(r) {
+      $('#system-reboot-required').show(); // show when r becomes available
+      $('#system-reboot-required').find('button').toggle(r);
+      $('#system-reboot-required').find('div').toggle(!r);
+    });
+
   api(
     "/system/status",
     "POST",
@@ -122,4 +139,22 @@ function enable_privacy(status) {
     });
   return false; // disable link
 }
+
+function confirm_reboot() {
+  show_modal_confirm(
+    "Reboot",
+    $("<p>This will reboot your Mail-in-a-Box <code>{{hostname}}</code>.</p> <p>Until the machine is fully restarted, your users will not be able to send and receive email, and you will not be able to connect to this control panel or with SSH. The reboot cannot be cancelled.</p>"),
+    "Reboot Now",
+    function() {
+      api(
+        "/system/reboot",
+        "POST",
+        { },
+        function(r) {
+          var msg = "<p>Please reload this page after a minute or so.</p>";
+          if (r) msg = "<p>The reboot command said:</p> <pre>" + $("<pre/>").text(r).html() + "</pre>"; // successful reboots don't produce any output; the output must be HTML-escaped
+          show_modal_error("Reboot", msg);
+        });
+    });
+}
 </script>

management/templates/users.html

@@ -84,6 +84,48 @@
   </table>
 </div>
 
+<h3>Mail user API (advanced)</h3>
+
+<p>Use your box&rsquo;s mail user API to add/change/remove users from the command-line or custom services you build.</p>
+
+<p>Usage:</p>
+
+<pre>curl -X <b>VERB</b> [-d "<b>parameters</b>"] --user {email}:{password} https://{{hostname}}/admin/mail/users[<b>action</b>]</pre>
+
+<p>Brackets denote an optional argument. Please note that the POST body <code>parameters</code> must be URL-encoded.</p>
+
+<p>The email and password given to the <code>--user</code> option must be an administrative user on this system.</p>
+
+<h4 style="margin-bottom: 0">Verbs</h4>
+
+<table class="table" style="margin-top: .5em">
+<thead><th>Verb</th> <th>Action</th><th></th></thead>
+<tr><td>GET</td><td><i>(none)</i></td> <td>Returns a list of existing mail users. Adding <code>?format=json</code> to the URL will give JSON-encoded results.</td></tr>
+<tr><td>POST</td><td>/add</td> <td>Adds a new mail user. Required POST-body parameters are <code>email</code> and <code>password</code>.</td></tr>
+<tr><td>POST</td><td>/remove</td> <td>Removes a mail user. Required POST-by parameter is <code>email</code>.</td></tr>
+<tr><td>POST</td><td>/privileges/add</td> <td>Used to make a mail user an admin. Required POST-body parameters are <code>email</code> and <code>privilege=admin</code>.</td></tr>
+<tr><td>POST</td><td>/privileges/remove</td> <td>Used to remove the admin privilege from a mail user. Required POST-body parameter is <code>email</code>.</td></tr>
+</table>
+
+<h4>Examples:</h4>
+
+<p>Try these examples. For simplicity the examples omit the <code>--user me@mydomain.com:yourpassword</code> command line argument which you must fill in with your administrative email address and password.</p>
+
+<pre># Gives a JSON-encoded list of all mail users
+curl -X GET https://{{hostname}}/admin/mail/users?format=json
+
+# Adds a new email user
+curl -X POST -d "email=new_user@mydomail.com" -d "password=s3curE_pa5Sw0rD" https://{{hostname}}/admin/mail/users/add
+
+# Removes a email user
+curl -X POST -d "email=new_user@mydomail.com" https://{{hostname}}/admin/mail/users/remove
+
+# Adds admin privilege to an email user
+curl -X POST -d "email=new_user@mydomail.com" -d "privilege=admin" https://{{hostname}}/admin/mail/users/privileges/add
+
+# Removes admin privilege from an email user
+curl -X POST -d "email=new_user@mydomail.com" https://{{hostname}}/admin/mail/users/privileges/remove
+</pre>
 
 <script>
 function show_users() {
@@ -170,7 +212,7 @@ function users_set_password(elem) {
     yourpw = "<p class='text-danger'>If you change your own password, you will be logged out of this control panel and will need to log in again.</p>";
 
   show_modal_confirm(
-    "Archive User",
+    "Set Password",
     $("<p>Set a new password for <b>" + email + "</b>?</p> <p><label for='users_set_password_pw' style='display: block; font-weight: normal'>New Password:</label><input type='password' id='users_set_password_pw'></p><p><small>Passwords must be at least four characters and may not contain spaces.</small>" + yourpw + "</p>"),
     "Set Password",
     function() {

management/templates/web.html

@@ -82,7 +82,7 @@ function show_change_web_root(elem) {
   var root = $(elem).parents('tr').attr('data-custom-web-root');
   show_modal_confirm(
     'Change Root Directory for ' + domain,
-    $('<p>You can change the static directory for <tt>' + domain + '</tt> to:</p> <p><tt>' + root + '</tt></p> <p>First create this directory on the server. Then click Update to scan for the directory and update web settings.'),
+    $('<p>You can change the static directory for <tt>' + domain + '</tt> to:</p> <p><tt>' + root + '</tt></p> <p>First create this directory on the server. Then click Update to scan for the directory and update web settings.</p>'),
     'Update',
     function() { do_web_update(); });
 }

security.md

@@ -69,6 +69,16 @@ The [setup guide video](https://mailinabox.email/) explains how to verify the ho
 
 If DNSSEC is enabled at the box's domain name's registrar, the SSHFP record that the box automatically puts into DNS can also be used to verify the host key fingerprint by setting `VerifyHostKeyDNS yes` in your `ssh/.config` file or by logging in with `ssh -o VerifyHostKeyDNS=yes`. ([source](management/dns_update.py))
 
+### Brute-force attack mitigation
+
+`fail2ban` provides some protection from brute-force login attacks (repeated logins that guess account passwords) by blocking offending IP addresses at the network level.
+
+The following services are protected: SSH, IMAP (dovecot), SMTP submission (postfix), webmail (roundcube), ownCloud/CalDAV/CardDAV (over HTTP), and the Mail-in-a-Box control panel & munin (over HTTP).
+
+Some other services running on the box may be missing fail2ban filters.
+
+`fail2ban` only blocks IPv4 addresses, however. If the box has a public IPv6 address, it is not protected from these attacks.
+
 Outbound Mail
 -------------
 
@@ -80,7 +90,7 @@ The first step in resolving the destination server for an email address is perfo
 
 ### Encryption
 
-The box (along with the vast majority of mail servers) uses [opportunistic encryption](https://en.wikipedia.org/wiki/Opportunistic_encryption), meaning the mail is encrypted in transit and protected from passive eavesdropping, but it is not protected from an active man-in-the-middle attack. Modern encryption settings will be used to the extent the recipient server supports them. ([source](setup/mail-postfix.sh))
+The box (along with the vast majority of mail servers) uses [opportunistic encryption](https://en.wikipedia.org/wiki/Opportunistic_encryption), meaning the mail is encrypted in transit and protected from passive eavesdropping, but it is not protected from an active man-in-the-middle attack. Modern encryption settings (TLSv1 and later, no RC4) will be used to the extent the recipient server supports them. ([source](setup/mail-postfix.sh))
 
 ### DANE
 
@@ -101,7 +111,7 @@ Incoming Mail
 
 ### Encryption
 
-As discussed above, there is no way to require on-the-wire encryption of mail. When the box receives an incoming email (SMTP on port 25), it offers encryption (STARTTLS) but cannot require that senders use it because some senders may not support STARTTLS at all and other senders may support STARTTLS but not with the latest protocols/ciphers. To give senders the best chance at making use of encryption, the box offers protocols back to SSLv3 and ciphers with key lengths as low as 112 bits. Modern clients (senders) will make use of the 256-bit ciphers and Diffie-Hellman ciphers with a 2048-bit key for forward secrecy, however. ([source](setup/mail-postfix.sh))
+As discussed above, there is no way to require on-the-wire encryption of mail. When the box receives an incoming email (SMTP on port 25), it offers encryption (STARTTLS) but cannot require that senders use it because some senders may not support STARTTLS at all and other senders may support STARTTLS but not with the latest protocols/ciphers. To give senders the best chance at making use of encryption, the box offers protocols back to TLSv1 and ciphers with key lengths as low as 112 bits. Modern clients (senders) will make use of the 256-bit ciphers and Diffie-Hellman ciphers with a 2048-bit key for perfect forward secrecy, however. ([source](setup/mail-postfix.sh))
 
 ### DANE
 

setup/bootstrap.sh

@@ -7,7 +7,7 @@
 #########################################################
 
 if [ -z "$TAG" ]; then
-	TAG=v0.17
+	TAG=v0.19
 fi
 
 # Are we running as root?

setup/dkim.sh

@@ -31,7 +31,7 @@ ExternalIgnoreList      refile:/etc/opendkim/TrustedHosts
 InternalHosts           refile:/etc/opendkim/TrustedHosts
 KeyTable                refile:/etc/opendkim/KeyTable
 SigningTable            refile:/etc/opendkim/SigningTable
-Socket                  inet:8891@localhost
+Socket                  inet:8891@127.0.0.1
 RequireSafeKeys         false
 EOF
 fi

setup/mail-dovecot.sh

@@ -38,7 +38,8 @@ apt_install \
 # would be 20 users). Set it to 250 times the number of cores this
 # machine has, so on a two-core machine that's 500 processes/100 users).
 tools/editconf.py /etc/dovecot/conf.d/10-master.conf \
-	default_process_limit=$(echo "`nproc` * 250" | bc)
+	default_process_limit=$(echo "`nproc` * 250" | bc) \
+	log_path=/var/log/mail.log
 
 # The inotify `max_user_instances` default is 128, which constrains
 # the total number of watched (IMAP IDLE push) folders by open connections.

setup/mail-postfix.sh

@@ -122,8 +122,9 @@ tools/editconf.py /etc/postfix/main.cf \
 	smtpd_tls_cert_file=$STORAGE_ROOT/ssl/ssl_certificate.pem \
 	smtpd_tls_key_file=$STORAGE_ROOT/ssl/ssl_private_key.pem \
 	smtpd_tls_dh1024_param_file=$STORAGE_ROOT/ssl/dh2048.pem \
+	smtpd_tls_protocols=\!SSLv2,\!SSLv3 \
 	smtpd_tls_ciphers=medium \
-	smtpd_tls_exclude_ciphers=aNULL \
+	smtpd_tls_exclude_ciphers=aNULL,RC4 \
 	smtpd_tls_received_header=yes
 
 # Prevent non-authenticated users from sending mail that requires being
@@ -158,6 +159,10 @@ tools/editconf.py /etc/postfix/main.cf \
 # even if we don't know if it's to the right party, than to not encrypt at all. Instead we'll
 # now see notices about trusted certs. The CA file is provided by the package `ca-certificates`.
 tools/editconf.py /etc/postfix/main.cf \
+	smtp_tls_protocols=\!SSLv2,\!SSLv3 \
+	smtp_tls_mandatory_protocols=\!SSLv2,\!SSLv3 \
+	smtp_tls_ciphers=medium \
+	smtp_tls_exclude_ciphers=aNULL,RC4 \
 	smtp_tls_security_level=dane \
 	smtp_dns_support_level=dnssec \
 	smtp_tls_CAfile=/etc/ssl/certs/ca-certificates.crt \

setup/mail-users.sh

@@ -38,17 +38,19 @@ passdb {
   args = /etc/dovecot/dovecot-sql.conf.ext
 }
 userdb {
-  driver = static
-  args = uid=mail gid=mail home=$STORAGE_ROOT/mail/mailboxes/%d/%n
+  driver = sql
+  args = /etc/dovecot/dovecot-sql.conf.ext
 }
 EOF
 
-# Configure the SQL to query for a user's password.
+# Configure the SQL to query for a user's metadata and password.
 cat > /etc/dovecot/dovecot-sql.conf.ext << EOF;
 driver = sqlite
 connect = $db_path
 default_pass_scheme = SHA512-CRYPT
 password_query = SELECT email as user, password FROM users WHERE email='%u';
+user_query = SELECT email AS user, "mail" as uid, "mail" as gid, "$STORAGE_ROOT/mail/mailboxes/%d/%n" as home FROM users WHERE email='%u';
+iterate_query = SELECT email AS user FROM users;
 EOF
 chmod 0600 /etc/dovecot/dovecot-sql.conf.ext # per Dovecot instructions
 

setup/munin.sh

@@ -7,7 +7,8 @@ source /etc/mailinabox.conf # load global vars
 
 # install Munin
 echo "Installing Munin (system monitoring)..."
-apt_install munin munin-node
+apt_install munin munin-node libcgi-fast-perl
+# libcgi-fast-perl is needed by /usr/lib/munin/cgi/munin-cgi-graph
 
 # edit config
 cat > /etc/munin/munin.conf <<EOF;
@@ -19,6 +20,9 @@ tmpldir /etc/munin/templates
 
 includedir /etc/munin/munin-conf.d
 
+# path dynazoom uses for requests
+cgiurl_graph /admin/munin/cgi-graph
+
 # a simple host tree
 [$PRIMARY_HOSTNAME]
 address 127.0.0.1
@@ -29,6 +33,10 @@ contact.admin.command mail -s "Munin notification ${var:host}" administrator@$PR
 contact.admin.always_send warning critical
 EOF
 
+# The Debian installer touches these files and chowns them to www-data:adm for use with spawn-fcgi
+chown munin. /var/log/munin/munin-cgi-html.log
+chown munin. /var/log/munin/munin-cgi-graph.log
+
 # ensure munin-node knows the name of this machine
 tools/editconf.py /etc/munin/munin-node.conf -s \
 	host_name=$PRIMARY_HOSTNAME

setup/owncloud.sh

@@ -17,8 +17,8 @@ apt_install \
 apt-get purge -qq -y owncloud*
 
 # Install ownCloud from source of this version:
-owncloud_ver=8.1.1
-owncloud_hash=34077e78575a3e689825a00964ee37fbf83fbdda
+owncloud_ver=8.2.3
+owncloud_hash=bfdf6166fbf6fc5438dc358600e7239d1c970613
 
 # Migrate <= v0.10 setups that stored the ownCloud config.php in /usr/local rather than
 # in STORAGE_ROOT. Move the file to STORAGE_ROOT.
@@ -52,8 +52,8 @@ if [ ! -d /usr/local/lib/owncloud/ ] \
 	# The two apps we actually want are not in ownCloud core. Clone them from
 	# their github repositories.
 	mkdir -p /usr/local/lib/owncloud/apps
-	git_clone https://github.com/owncloud/contacts 4ff855e7c2075309041bead09fbb9eb7df678244 '' /usr/local/lib/owncloud/apps/contacts
-	git_clone https://github.com/owncloud/calendar ec53139b144c0f842c33813305612e8006c42ea5 '' /usr/local/lib/owncloud/apps/calendar
+	git_clone https://github.com/owncloudarchive/contacts 9ba2e667ae8c7ea36d8c4a4c3413c374beb24b1b '' /usr/local/lib/owncloud/apps/contacts
+	git_clone https://github.com/owncloudarchive/calendar 2086e738a3b7b868ec59cd61f0f88b49c3f21dd1 '' /usr/local/lib/owncloud/apps/calendar
 
 	# Fix weird permissions.
 	chmod 750 /usr/local/lib/owncloud/{apps,config}
@@ -92,7 +92,6 @@ if [ ! -f $STORAGE_ROOT/owncloud/owncloud.db ]; then
 	mkdir -p $STORAGE_ROOT/owncloud
 
 	# Create an initial configuration file.
-	TIMEZONE=$(cat /etc/timezone)
 	instanceid=oc$(echo $PRIMARY_HOSTNAME | sha1sum | fold -w 10 | head -n 1)
 	cat > $STORAGE_ROOT/owncloud/config.php <<EOF;
 <?php
@@ -108,12 +107,12 @@ if [ ! -f $STORAGE_ROOT/owncloud/owncloud.db ]; then
   'user_backends' => array(
     array(
       'class'=>'OC_User_IMAP',
-      'arguments'=>array('{localhost:993/imap/ssl/novalidate-cert}')
+      'arguments'=>array('{127.0.0.1:993/imap/ssl/novalidate-cert}')
     )
   ),
   'memcache.local' => '\\OC\\Memcache\\Memcached',
   "memcached_servers" => array (
-    array('localhost', 11211),
+    array('127.0.0.1', 11211),
   ),
   'mail_smtpmode' => 'sendmail',
   'mail_smtpsecure' => '',
@@ -125,7 +124,6 @@ if [ ! -f $STORAGE_ROOT/owncloud/owncloud.db ]; then
   'mail_smtppassword' => '',
   'mail_from_address' => 'owncloud',
   'mail_domain' => '$PRIMARY_HOSTNAME',
-  'logtimezone' => '$TIMEZONE',
 );
 ?>
 EOF
@@ -163,7 +161,11 @@ fi
 #   so set it here. It also can change if the box's PRIMARY_HOSTNAME changes, so
 #   this will make sure it has the right value.
 # * Some settings weren't included in previous versions of Mail-in-a-Box.
+# * We need to set the timezone to the system timezone to allow fail2ban to ban
+#   users within the proper timeframe
+# * We need to set the logdateformat to something that will work correctly with fail2ban
 # Use PHP to read the settings file, modify it, and write out the new settings array.
+TIMEZONE=$(cat /etc/timezone)
 CONFIG_TEMP=$(/bin/mktemp)
 php <<EOF > $CONFIG_TEMP && mv $CONFIG_TEMP $STORAGE_ROOT/owncloud/config.php;
 <?php
@@ -175,6 +177,9 @@ include("$STORAGE_ROOT/owncloud/config.php");
 \$CONFIG['overwrite.cli.url'] = '/cloud';
 \$CONFIG['mail_from_address'] = 'administrator'; # just the local part, matches our master administrator address
 
+\$CONFIG['logtimezone'] = '$TIMEZONE';
+\$CONFIG['logdateformat'] = 'Y-m-d H:i:s';
+
 echo "<?php\n\\\$CONFIG = ";
 var_export(\$CONFIG);
 echo ";";

setup/preflight.sh

@@ -33,3 +33,30 @@ if [ ! -d /vagrant ]; then
 	exit
 fi
 fi
+
+# Check that tempfs is mounted with exec
+MOUNTED_TMP_AS_NO_EXEC=$(grep "/tmp.*noexec" /proc/mounts)
+if [ -n "$MOUNTED_TMP_AS_NO_EXEC" ]; then
+	echo "Mail-in-a-Box has to have exec rights on /tmp, please mount /tmp with exec"
+	exit
+fi
+
+# Check that no .wgetrc exists
+if [ -e ~/.wgetrc ]; then
+	echo "Mail-in-a-Box expects no overrides to wget defaults, ~/.wgetrc exists"
+	exit
+fi
+
+# Check that we are running on x86_64 or i686, any other architecture is unsupported and
+# will fail later in the setup when we try to install the custom build lucene packages.
+#
+# Set ARM=1 to ignore this check if you have built the packages yourself. If you do this
+# you are on your own!
+ARCHITECTURE=$(uname -m)
+if [ "$ARCHITECTURE" != "x86_64" ] && [ "$ARCHITECTURE" != "i686" ]; then
+if [ -z "$ARM" ]; then
+	echo "Mail-in-a-Box only supports x86_64 or i686 and will not work on any other architecture, like ARM."
+	echo "Your architecture is $ARCHITECTURE"
+	exit
+fi
+fi

setup/spamassassin.sh

@@ -78,9 +78,13 @@ tools/editconf.py /etc/spamassassin/local.cf -s \
 # * Writable by the debian-spamd user, which runs /etc/cron.daily/spamassassin.
 #
 # We'll have these files owned by spampd and grant access to the other two processes.
+#
+# Spamassassin will change the access rights back to the defaults, so we must also configure
+# the filemode in the config file.
 
 tools/editconf.py /etc/spamassassin/local.cf -s \
-	bayes_path=$STORAGE_ROOT/mail/spamassassin/bayes
+	bayes_path=$STORAGE_ROOT/mail/spamassassin/bayes \
+	bayes_file_mode=0660
 
 mkdir -p $STORAGE_ROOT/mail/spamassassin
 chown -R spampd:spampd $STORAGE_ROOT/mail/spamassassin

setup/start.sh

@@ -5,7 +5,8 @@
 source setup/functions.sh # load our functions
 
 # Check system setup: Are we running as root on Ubuntu 14.04 on a
-# machine with enough memory? If not, this shows an error and exits.
+# machine with enough memory? Is /tmp mounted with exec.
+# If not, this shows an error and exits.
 source setup/preflight.sh
 
 # Ensure Python reads/writes files in UTF-8. If the machine
@@ -23,6 +24,9 @@ export LC_ALL=en_US.UTF-8
 export LANG=en_US.UTF-8
 export LC_TYPE=en_US.UTF-8
 
+# Fix so line drawing characters are shown correctly in Putty on Windows. See #744.
+export NCURSES_NO_UTF8_ACS=1
+
 # Recall the last settings used if we're running this a second time.
 if [ -f /etc/mailinabox.conf ]; then
 	# Run any system migrations before proceeding. Since this is a second run,
@@ -108,7 +112,7 @@ source setup/management.sh
 source setup/munin.sh
 
 # Ping the management daemon to write the DNS and nginx configuration files.
-until nc -z -w 4 localhost 10222
+until nc -z -w 4 127.0.0.1 10222
 do
 	echo Waiting for the Mail-in-a-Box management daemon to start...
 	sleep 2

setup/system.sh

@@ -4,6 +4,70 @@ source setup/functions.sh # load our functions
 # Basic System Configuration
 # -------------------------
 
+# ### Set hostname of the box
+
+# If the hostname is not correctly resolvable sudo can't be used. This will result in
+# errors during the install
+#
+# First set the hostname in the configuration file, then activate the setting
+
+echo $PRIMARY_HOSTNAME > /etc/hostname
+hostname $PRIMARY_HOSTNAME
+
+# ### Add swap space to the system
+
+# If the physical memory of the system is below 2GB it is wise to create a
+# swap file. This will make the system more resiliant to memory spikes and
+# prevent for instance spam filtering from crashing
+
+# We will create a 1G file, this should be a good balance between disk usage
+# and buffers for the system. We will only allocate this file if there is more
+# than 5GB of disk space available
+
+# The following checks are performed:
+# - Check if swap is currently mountend by looking at /proc/swaps
+# - Check if the user intents to activate swap on next boot by checking fstab entries.
+# - Check if a swapfile already exists
+# - Check if the root file system is not btrfs, might be an incompatible version with
+#   swapfiles. User should hanle it them selves.
+# - Check the memory requirements
+# - Check available diskspace
+
+# See https://www.digitalocean.com/community/tutorials/how-to-add-swap-on-ubuntu-14-04
+# for reference
+
+SWAP_MOUNTED=$(cat /proc/swaps | tail -n+2)
+SWAP_IN_FSTAB=$(grep "swap" /etc/fstab)
+ROOT_IS_BTRFS=$(grep "\/ .*btrfs" /proc/mounts)
+TOTAL_PHYSICAL_MEM=$(head -n 1 /proc/meminfo | awk '{print $2}')
+AVAILABLE_DISK_SPACE=$(df / --output=avail | tail -n 1)
+if
+	[ -z "$SWAP_MOUNTED" ] &&
+	[ -z "$SWAP_IN_FSTAB" ] &&
+	[ ! -e /swapfile ] &&
+	[ -z "$ROOT_IS_BTRFS" ] &&
+	[ $TOTAL_PHYSICAL_MEM -lt 1900000 ] &&
+	[ $AVAILABLE_DISK_SPACE -gt 5242880 ]
+then
+	echo "Adding a swap file to the system..."
+
+	# Allocate and activate the swap file. Allocate in 1KB chuncks
+	# doing it in one go, could fail on low memory systems
+	dd if=/dev/zero of=/swapfile bs=1024 count=$[1024*1024] status=none
+	if [ -e /swapfile ]; then
+		chmod 600 /swapfile
+		hide_output mkswap /swapfile
+		swapon /swapfile
+	fi
+
+	# Check if swap is mounted then activate on boot
+	if swapon -s | grep -q "\/swapfile"; then
+		echo "/swapfile   none    swap    sw    0   0" >> /etc/fstab
+	else
+		echo "ERROR: Swap allocation failed"
+	fi
+fi
+
 # ### Add Mail-in-a-Box's PPA.
 
 # We've built several .deb packages on our own that we want to include.
@@ -227,10 +291,12 @@ restart_service resolvconf
 
 # ### Fail2Ban Service
 
-# Configure the Fail2Ban installation to prevent dumb bruce-force attacks against dovecot, postfix and ssh
-cat conf/fail2ban/jail.local \
+# Configure the Fail2Ban installation to prevent dumb bruce-force attacks against dovecot, postfix, ssh, etc.
+rm -f /etc/fail2ban/jail.local # we used to use this file but don't anymore
+cat conf/fail2ban/jails.conf \
 	| sed "s/PUBLIC_IP/$PUBLIC_IP/g" \
-	> /etc/fail2ban/jail.local
-cp conf/fail2ban/dovecotimap.conf /etc/fail2ban/filter.d/dovecotimap.conf
+	| sed "s#STORAGE_ROOT#$STORAGE_ROOT#" \
+	> /etc/fail2ban/jail.d/mailinabox.conf
+cp -f conf/fail2ban/filter.d/* /etc/fail2ban/filter.d/
 
 restart_service fail2ban

setup/webmail.sh

@@ -34,11 +34,11 @@ apt-get purge -qq -y roundcube* #NODOC
 # Install Roundcube from source if it is not already present or if it is out of date.
 # Combine the Roundcube version number with the commit hash of vacation_sieve to track
 # whether we have the latest version.
-VERSION=1.1.4
-HASH=4883c8bb39fadf8af94ffb09ee426cba9f8ef2e3
+VERSION=1.2.1
+HASH=81fbfba4683522f6e54006d0300a48e6da3f3bbd
 VACATION_SIEVE_VERSION=91ea6f52216390073d1f5b70b5f6bea0bfaee7e5
 PERSISTENT_LOGIN_VERSION=1e9d724476a370ce917a2fcd5b3217b0c306c24e
-HTML5_NOTIFIER_VERSION=046eb388dd63b1ec77a3ee485757fc25ae9e684d
+HTML5_NOTIFIER_VERSION=4b370e3cd60dabd2f428a26f45b677ad1b7118d5
 UPDATE_KEY=$VERSION:$VACATION_SIEVE_VERSION:$PERSISTENT_LOGIN_VERSION:$HTML5_NOTIFIER_VERSION:a
 needs_update=0 #NODOC
 if [ ! -f /usr/local/lib/roundcubemail/version ]; then
@@ -51,7 +51,7 @@ fi
 if [ $needs_update == 1 ]; then
 	# install roundcube
 	wget_verify \
-		https://downloads.sourceforge.net/project/roundcubemail/roundcubemail/$VERSION/roundcubemail-$VERSION.tar.gz \
+		https://github.com/roundcube/roundcubemail/releases/download/$VERSION/roundcubemail-$VERSION.tar.gz \
 		$HASH \
 		/tmp/roundcube.tgz
 	tar -C /usr/local/lib --no-same-owner -zxf /tmp/roundcube.tgz
@@ -94,12 +94,12 @@ cat > /usr/local/lib/roundcubemail/config/config.inc.php <<EOF;
 \$config['default_host'] = 'ssl://localhost';
 \$config['default_port'] = 993;
 \$config['imap_timeout'] = 15;
-\$config['smtp_server'] = 'tls://localhost';
+\$config['smtp_server'] = 'tls://127.0.0.1';
 \$config['smtp_port'] = 587;
 \$config['smtp_user'] = '%u';
 \$config['smtp_pass'] = '%p';
 \$config['support_url'] = 'https://mailinabox.email/';
-\$config['product_name'] = 'Mail-in-a-Box/Roundcube Webmail';
+\$config['product_name'] = '$PRIMARY_HOSTNAME Webmail';
 \$config['des_key'] = '$SECRET_KEY';
 \$config['plugins'] = array('html5_notifier', 'archive', 'zipdownload', 'password', 'managesieve', 'jqueryui', 'vacation_sieve', 'persistent_login');
 \$config['skin'] = 'classic';
@@ -121,7 +121,7 @@ cat > /usr/local/lib/roundcubemail/plugins/vacation_sieve/config.inc.php <<EOF;
     'transfer' => array(
         'mode' =>  'managesieve',
         'ms_activate_script' => true,
-        'host'   => 'localhost',
+        'host'   => '127.0.0.1',
         'port'   => '4190',
         'usetls' => false,
         'path' => 'vacation',
@@ -157,6 +157,12 @@ chmod 775 $STORAGE_ROOT/mail
 chown root.www-data $STORAGE_ROOT/mail/users.sqlite 
 chmod 664 $STORAGE_ROOT/mail/users.sqlite 
 
+# Run Roundcube database migration script, if the database exists (it's created by
+# Roundcube on first use).
+if [ -f $STORAGE_ROOT/mail/roundcube/roundcube.sqlite ]; then
+	/usr/local/lib/roundcubemail/bin/updatedb.sh --dir /usr/local/lib/roundcubemail/SQL --package roundcube
+fi
+
 # Enable PHP modules.
 php5enmod mcrypt
 restart_service php5-fpm

tests/fail2ban.py

@@ -0,0 +1,195 @@
+# Test that a box's fail2ban setting are working
+# correctly by attempting a bunch of failed logins.
+# Specify SSH login information the command line -
+# we use that to reset fail2ban after each test,
+# and we extract the hostname from that to open
+# connections to.
+######################################################################
+
+import sys, os, time, functools
+
+# parse command line
+
+if len(sys.argv) < 2:
+	print("Usage: tests/fail2ban.py user@hostname")
+	sys.exit(1)
+
+ssh_user, hostname = sys.argv[1].split("@", 1)
+
+# define some test types
+
+import socket
+socket.setdefaulttimeout(10)
+
+class IsBlocked(Exception):
+	"""Tests raise this exception when it appears that a fail2ban
+	jail is in effect, i.e. on a connection refused error."""
+	pass
+
+def smtp_test():
+	import smtplib
+
+	try:
+		server = smtplib.SMTP(hostname, 587)
+	except ConnectionRefusedError:
+		# looks like fail2ban worked
+		raise IsBlocked()
+	server.starttls()
+	server.ehlo_or_helo_if_needed()
+
+	try:
+		server.login("fakeuser", "fakepassword")
+		raise Exception("authentication didn't fail")
+	except smtplib.SMTPAuthenticationError:
+		# athentication should fail
+		pass
+
+	try:
+		server.quit()
+	except:
+		# ignore errors here
+		pass
+
+def imap_test():
+	import imaplib
+
+	try:
+		M = imaplib.IMAP4_SSL(hostname)
+	except ConnectionRefusedError:
+		# looks like fail2ban worked
+		raise IsBlocked()
+
+	try:
+		M.login("fakeuser", "fakepassword")
+		raise Exception("authentication didn't fail")
+	except imaplib.IMAP4.error:
+		# authentication should fail
+		pass
+	finally:
+		M.logout() # shuts down connection, has nothing to do with login()
+
+def http_test(url, expected_status, postdata=None, qsargs=None, auth=None):
+	import urllib.parse
+	import requests
+	from requests.auth import HTTPBasicAuth
+
+	# form request
+	url = urllib.parse.urljoin("https://" + hostname, url)
+	if qsargs: url += "?" + urllib.parse.urlencode(qsargs)
+	urlopen = requests.get if not postdata else requests.post
+
+	try:
+		# issue request
+		r = urlopen(
+			url,
+			auth=HTTPBasicAuth(*auth) if auth else None,
+			data=postdata,
+			headers={'User-Agent': 'Mail-in-a-Box fail2ban tester'},
+			timeout=8)
+	except requests.exceptions.ConnectTimeout as e:
+		raise IsBlocked()
+	except requests.exceptions.ConnectionError as e:
+		if "Connection refused" in str(e):
+			raise IsBlocked()
+		raise # some other unexpected condition
+
+	# return response status code
+	if r.status_code != expected_status:
+		r.raise_for_status() # anything but 200
+		raise IOError("Got unexpected status code %s." % r.status_code)
+
+# define how to run a test
+
+def restart_fail2ban_service(final=False):
+	# Log in over SSH to restart fail2ban.
+	command = "sudo fail2ban-client reload"
+	if not final:
+		# Stop recidive jails during testing.
+		command += " && sudo fail2ban-client stop recidive"
+	os.system("ssh %s@%s \"%s\"" % (ssh_user, hostname, command))
+
+def testfunc_runner(i, testfunc, *args):
+	print(i+1, end=" ", flush=True)
+	testfunc(*args)
+
+def run_test(testfunc, args, count, within_seconds, parallel):
+	# Run testfunc count times in within_seconds seconds (and actually
+	# within a little less time so we're sure we're under the limit).
+	#
+	# Because some services are slow, like IMAP, we can't necessarily
+	# run testfunc sequentially and still get to count requests within
+	# the required time. So we split the requests across threads.
+
+	import requests.exceptions
+	from multiprocessing import Pool
+
+	restart_fail2ban_service()
+
+	# Log.
+	print(testfunc.__name__, " ".join(str(a) for a in args), "...")
+
+	# Record the start time so we can know how to evenly space our
+	# calls to testfunc.
+	start_time = time.time()
+
+	with Pool(parallel) as p:
+		# Distribute the requests across the pool.
+		asyncresults = []
+		for i in range(count):
+			ar = p.apply_async(testfunc_runner, [i, testfunc] + list(args))
+			asyncresults.append(ar)
+
+		# Wait for all runs to finish.
+		p.close()
+		p.join()
+
+		# Check for errors.
+		for ar in asyncresults:
+			try:
+				ar.get()
+			except IsBlocked:
+				print("Test machine prematurely blocked!")
+				return False
+
+	# Did we make enough requests within the limit?
+	if (time.time()-start_time) > within_seconds:
+		raise Exception("Test failed to make %s requests in %d seconds." % (count, within_seconds))
+
+	# Wait a moment for the block to be put into place.
+	time.sleep(4)
+
+	# The next call should fail.
+	print("*", end=" ", flush=True)
+	try:
+		testfunc(*args)
+	except IsBlocked:
+		# Success -- this one is supposed to be refused.
+		print("blocked [OK]")
+		return True # OK
+
+	print("not blocked!")
+	return False
+
+######################################################################
+
+if __name__ == "__main__":
+	# run tests
+
+	# SMTP bans at 10 even though we say 20 in the config because we get
+	# doubled-up warnings in the logs, we'll let that be for now
+	run_test(smtp_test, [], 10, 30, 8)
+
+	# IMAP
+	run_test(imap_test, [], 20, 30, 4)
+
+	# Mail-in-a-Box control panel
+	run_test(http_test, ["/admin/me", 200], 20, 30, 1)
+
+	# Munin via the Mail-in-a-Box control panel
+	run_test(http_test, ["/admin/munin/", 401], 20, 30, 1)
+
+	# ownCloud
+	run_test(http_test, ["/cloud/remote.php/webdav", 401, None, None, ["aa", "aa"]], 20, 120, 1)
+
+	# restart fail2ban so that this client machine is no longer blocked
+	restart_fail2ban_service(final=True)

tests/tls_results.txt

@@ -33,7 +33,6 @@ PORT 25
                  AES256-SHA256                 -              256 bits      250 2.0.0 Ok                       
                  AES256-SHA                    -              256 bits      250 2.0.0 Ok                       
                  AES256-GCM-SHA384             -              256 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-RC4-SHA             ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-AES128-SHA256       ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-AES128-GCM-SHA256   ECDH-256 bits  128 bits      250 2.0.0 Ok                       
@@ -43,8 +42,6 @@ PORT 25
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  DHE-RSA-AES128-GCM-SHA256     DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  SEED-SHA                      -              128 bits      250 2.0.0 Ok                       
-                 RC4-SHA                       -              128 bits      250 2.0.0 Ok                       
-                 RC4-MD5                       -              128 bits      250 2.0.0 Ok                       
                  CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
                  AES128-SHA256                 -              128 bits      250 2.0.0 Ok                       
                  AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
@@ -62,37 +59,11 @@ PORT 25
                  DHE-RSA-AES256-SHA            DH-2048 bits   256 bits      250 2.0.0 Ok                       
                  CAMELLIA256-SHA               -              256 bits      250 2.0.0 Ok                       
                  AES256-SHA                    -              256 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-RC4-SHA             ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  DHE-RSA-SEED-SHA              DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  DHE-RSA-CAMELLIA128-SHA       DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  SEED-SHA                      -              128 bits      250 2.0.0 Ok                       
-                 RC4-SHA                       -              128 bits      250 2.0.0 Ok                       
-                 RC4-MD5                       -              128 bits      250 2.0.0 Ok                       
-                 CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
-                 AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-DES-CBC3-SHA        ECDH-256 bits  112 bits      250 2.0.0 Ok                       
-                 EDH-RSA-DES-CBC3-SHA          DH-2048 bits   112 bits      250 2.0.0 Ok                       
-                 DES-CBC3-SHA                  -              112 bits      250 2.0.0 Ok                       
-
-  * SSLV3 Cipher Suites:
-      Preferred:                       
-                 ECDHE-RSA-AES256-SHA          ECDH-256 bits  256 bits      250 2.0.0 Ok                       
-      Accepted:                        
-                 ECDHE-RSA-AES256-SHA          ECDH-256 bits  256 bits      250 2.0.0 Ok                       
-                 DHE-RSA-CAMELLIA256-SHA       DH-2048 bits   256 bits      250 2.0.0 Ok                       
-                 DHE-RSA-AES256-SHA            DH-2048 bits   256 bits      250 2.0.0 Ok                       
-                 CAMELLIA256-SHA               -              256 bits      250 2.0.0 Ok                       
-                 AES256-SHA                    -              256 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-RC4-SHA             ECDH-256 bits  128 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      250 2.0.0 Ok                       
-                 DHE-RSA-SEED-SHA              DH-2048 bits   128 bits      250 2.0.0 Ok                       
-                 DHE-RSA-CAMELLIA128-SHA       DH-2048 bits   128 bits      250 2.0.0 Ok                       
-                 DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      250 2.0.0 Ok                       
-                 SEED-SHA                      -              128 bits      250 2.0.0 Ok                       
-                 RC4-SHA                       -              128 bits      250 2.0.0 Ok                       
-                 RC4-MD5                       -              128 bits      250 2.0.0 Ok                       
                  CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
                  AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-DES-CBC3-SHA        ECDH-256 bits  112 bits      250 2.0.0 Ok                       
@@ -108,23 +79,23 @@ PORT 25
                  DHE-RSA-AES256-SHA            DH-2048 bits   256 bits      250 2.0.0 Ok                       
                  CAMELLIA256-SHA               -              256 bits      250 2.0.0 Ok                       
                  AES256-SHA                    -              256 bits      250 2.0.0 Ok                       
-                 ECDHE-RSA-RC4-SHA             ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      250 2.0.0 Ok                       
                  DHE-RSA-SEED-SHA              DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  DHE-RSA-CAMELLIA128-SHA       DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  SEED-SHA                      -              128 bits      250 2.0.0 Ok                       
-                 RC4-SHA                       -              128 bits      250 2.0.0 Ok                       
-                 RC4-MD5                       -              128 bits      250 2.0.0 Ok                       
                  CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
                  AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
                  ECDHE-RSA-DES-CBC3-SHA        ECDH-256 bits  112 bits      250 2.0.0 Ok                       
                  EDH-RSA-DES-CBC3-SHA          DH-2048 bits   112 bits      250 2.0.0 Ok                       
-                 DES-CBC3-SHA                  -              112 bits      250 2.0.0 Ok
+                 DES-CBC3-SHA                  -              112 bits      250 2.0.0 Ok                       
 
-  Should Not Offer: DHE-RSA-SEED-SHA, ECDHE-RSA-RC4-SHA, EDH-RSA-DES-CBC3-SHA, RC4-MD5, RC4-SHA, SEED-SHA
-  Could Also Offer: DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-DSS-AES256-SHA256, DHE-DSS-CAMELLIA128-SHA, DHE-DSS-CAMELLIA256-SHA, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, ECDHE-ECDSA-DES-CBC3-SHA, SRP-3DES-EDE-CBC-SHA, SRP-AES-128-CBC-SHA, SRP-AES-256-CBC-SHA, SRP-DSS-3DES-EDE-CBC-SHA, SRP-DSS-AES-128-CBC-SHA, SRP-DSS-AES-256-CBC-SHA, SRP-RSA-3DES-EDE-CBC-SHA, SRP-RSA-AES-128-CBC-SHA, SRP-RSA-AES-256-CBC-SHA
-  Supported Clients: OpenSSL/1.0.2, Yahoo Slurp/Jan 2015, BingPreview/Jan 2015, OpenSSL/1.0.1l, YandexBot/Jan 2015, Android/4.4.2, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, Safari/8/OS X 10.10, Safari/7/iOS 7.1, Safari/6/iOS 6.0.1, Baidu/Jan 2015, Firefox/31.3.0 ESR/Win 7, Android/5.0.0, IE/11/Win 7, Java/8u31, Googlebot/Feb 2015, Chrome/42/OS X, IE Mobile/11/Win Phone 8.1, IE/11/Win 8.1, Android/4.0.4, Android/4.1.1, Safari/6.0.4/OS X 10.8.4, Android/4.3, Android/4.2.2, Safari/5.1.9/OS X 10.6.8, Java/7u25, OpenSSL/0.9.8y, Firefox/37/OS X, IE/7/Vista, IE/8-10/Win 7, IE Mobile/10/Win Phone 8.0, Java/6u45, Android/2.3.7, IE/8/XP
+  * SSLV3 Cipher Suites:
+      Server rejected all cipher suites.
+
+  Should Not Offer: DHE-RSA-SEED-SHA, EDH-RSA-DES-CBC3-SHA, SEED-SHA
+  Could Also Offer: DH-DSS-AES128-GCM-SHA256, DH-DSS-AES128-SHA, DH-DSS-AES128-SHA256, DH-DSS-AES256-GCM-SHA384, DH-DSS-AES256-SHA, DH-DSS-AES256-SHA256, DH-DSS-CAMELLIA128-SHA, DH-DSS-CAMELLIA256-SHA, DH-DSS-DES-CBC3-SHA, DH-RSA-AES128-GCM-SHA256, DH-RSA-AES128-SHA, DH-RSA-AES128-SHA256, DH-RSA-AES256-GCM-SHA384, DH-RSA-AES256-SHA, DH-RSA-AES256-SHA256, DH-RSA-CAMELLIA128-SHA, DH-RSA-CAMELLIA256-SHA, DH-RSA-DES-CBC3-SHA, DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-DSS-AES256-SHA256, DHE-DSS-CAMELLIA128-SHA, DHE-DSS-CAMELLIA256-SHA, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, ECDHE-ECDSA-DES-CBC3-SHA, SRP-3DES-EDE-CBC-SHA, SRP-AES-128-CBC-SHA, SRP-AES-256-CBC-SHA, SRP-DSS-3DES-EDE-CBC-SHA, SRP-DSS-AES-128-CBC-SHA, SRP-DSS-AES-256-CBC-SHA, SRP-RSA-3DES-EDE-CBC-SHA, SRP-RSA-AES-128-CBC-SHA, SRP-RSA-AES-256-CBC-SHA
+  Supported Clients: OpenSSL/1.0.2, OpenSSL/1.0.1l, BingPreview/Jan 2015, Yahoo Slurp/Jan 2015, YandexBot/Jan 2015, Android/4.4.2, Safari/7/iOS 7.1, Safari/8/OS X 10.10, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, Safari/6/iOS 6.0.1, Firefox/31.3.0 ESR/Win 7, Baidu/Jan 2015, IE/11/Win 8.1, IE/11/Win 7, IE Mobile/11/Win Phone 8.1, Android/5.0.0, Java/8u31, Chrome/42/OS X, Googlebot/Feb 2015, Android/4.1.1, Android/4.0.4, Safari/6.0.4/OS X 10.8.4, Android/4.2.2, Android/4.3, Safari/5.1.9/OS X 10.6.8, Firefox/37/OS X, OpenSSL/0.9.8y, Java/7u25, IE/8-10/Win 7, IE/7/Vista, IE Mobile/10/Win Phone 8.0, Android/2.3.7, Java/6u45, IE/8/XP
 
 PORT 587
 --------
@@ -192,9 +163,6 @@ PORT 587
                  CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
                  AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
 
-  * SSLV3 Cipher Suites:
-      Server rejected all cipher suites.
-
   * TLSV1 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES256-SHA          ECDH-256 bits  256 bits      250 2.0.0 Ok                       
@@ -210,11 +178,14 @@ PORT 587
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      250 2.0.0 Ok                       
                  SEED-SHA                      -              128 bits      250 2.0.0 Ok                       
                  CAMELLIA128-SHA               -              128 bits      250 2.0.0 Ok                       
-                 AES128-SHA                    -              128 bits      250 2.0.0 Ok
+                 AES128-SHA                    -              128 bits      250 2.0.0 Ok                       
+
+  * SSLV3 Cipher Suites:
+      Server rejected all cipher suites.
 
   Should Not Offer: AES128-GCM-SHA256, AES128-SHA, AES128-SHA256, AES256-GCM-SHA384, AES256-SHA, AES256-SHA256, CAMELLIA128-SHA, CAMELLIA256-SHA, DHE-RSA-CAMELLIA128-SHA, DHE-RSA-CAMELLIA256-SHA, DHE-RSA-SEED-SHA, SEED-SHA
   Could Also Offer: DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384
-  Supported Clients: OpenSSL/1.0.2, Yahoo Slurp/Jan 2015, BingPreview/Jan 2015, OpenSSL/1.0.1l, YandexBot/Jan 2015, Android/4.4.2, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, Safari/8/OS X 10.10, Safari/7/iOS 7.1, IE Mobile/11/Win Phone 8.1, IE/11/Win 8.1, IE/11/Win 7, Safari/6/iOS 6.0.1, Firefox/31.3.0 ESR/Win 7, Baidu/Jan 2015, Android/5.0.0, Chrome/42/OS X, Java/8u31, Googlebot/Feb 2015, Firefox/37/OS X, Android/4.0.4, Android/4.1.1, Safari/6.0.4/OS X 10.8.4, Android/4.3, Android/4.2.2, Safari/5.1.9/OS X 10.6.8, OpenSSL/0.9.8y, IE/7/Vista, IE/8-10/Win 7, IE Mobile/10/Win Phone 8.0, Java/7u25, Java/6u45, Android/2.3.7
+  Supported Clients: OpenSSL/1.0.2, OpenSSL/1.0.1l, BingPreview/Jan 2015, Yahoo Slurp/Jan 2015, YandexBot/Jan 2015, Android/4.4.2, Safari/7/iOS 7.1, IE/11/Win 8.1, Safari/8/iOS 8.1.2, IE/11/Win 7, IE Mobile/11/Win Phone 8.1, Safari/8/OS X 10.10, Safari/7/OS X 10.9, Safari/6/iOS 6.0.1, Firefox/31.3.0 ESR/Win 7, Baidu/Jan 2015, Chrome/42/OS X, Android/5.0.0, Java/8u31, Googlebot/Feb 2015, Firefox/37/OS X, Android/4.0.4, Android/4.1.1, Safari/6.0.4/OS X 10.8.4, Android/4.2.2, Android/4.3, Safari/5.1.9/OS X 10.6.8, IE/8-10/Win 7, IE/7/Vista, IE Mobile/10/Win Phone 8.0, OpenSSL/0.9.8y, Java/7u25, Java/6u45, Android/2.3.7
 
 PORT 443
 --------
@@ -226,22 +197,22 @@ PORT 443
       Client-initiated Renegotiations:   OK - Rejected
       Secure Renegotiation:              OK - Supported
 
-  * HTTP Strict Transport Security:
-      OK - HSTS header received:         max-age=31536000
+  * OpenSSL Heartbleed:
+      OK - Not vulnerable to Heartbleed  
 
   * Session Resumption:
       With Session IDs:                  OK - Supported (5 successful, 0 failed, 0 errors, 5 total attempts).
       With TLS Session Tickets:          OK - Supported
 
-  * OpenSSL Heartbleed:
-      OK - Not vulnerable to Heartbleed  
+  * HTTP Strict Transport Security:
+      OK - HSTS header received:         max-age=31536000
+
+Unhandled exception when processing --chrome_sha1: 
+exceptions.TypeError - Incorrect padding
 
   * SSLV2 Cipher Suites:
       Server rejected all cipher suites.
 
-  * Google Chrome SHA-1 Deprecation Status:
-      OK - Leaf certificate expires before 2016.
-
   * TLSV1_2 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES128-GCM-SHA256   ECDH-256 bits  128 bits      HTTP 200 OK                        
@@ -270,9 +241,6 @@ PORT 443
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      HTTP 200 OK                        
                  DES-CBC3-SHA                  -              112 bits      HTTP 200 OK                        
 
-  * SSLV3 Cipher Suites:
-      Server rejected all cipher suites.
-
   * TLSV1 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      HTTP 200 OK                        
@@ -281,11 +249,14 @@ PORT 443
                  DHE-RSA-AES256-SHA            DH-2048 bits   256 bits      HTTP 200 OK                        
                  ECDHE-RSA-AES128-SHA          ECDH-256 bits  128 bits      HTTP 200 OK                        
                  DHE-RSA-AES128-SHA            DH-2048 bits   128 bits      HTTP 200 OK                        
-                 DES-CBC3-SHA                  -              112 bits      HTTP 200 OK
+                 DES-CBC3-SHA                  -              112 bits      HTTP 200 OK                        
+
+  * SSLV3 Cipher Suites:
+      Server rejected all cipher suites.
 
   Should Not Offer: (none -- good)
-  Could Also Offer: AES128-GCM-SHA256, AES128-SHA, AES128-SHA256, AES256-GCM-SHA384, AES256-SHA, AES256-SHA256, CAMELLIA128-SHA, CAMELLIA256-SHA, DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-DSS-AES256-SHA256, DHE-DSS-CAMELLIA128-SHA, DHE-DSS-CAMELLIA256-SHA, DHE-RSA-CAMELLIA128-SHA, DHE-RSA-CAMELLIA256-SHA, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, SRP-AES-128-CBC-SHA, SRP-AES-256-CBC-SHA, SRP-DSS-AES-128-CBC-SHA, SRP-DSS-AES-256-CBC-SHA, SRP-RSA-AES-128-CBC-SHA, SRP-RSA-AES-256-CBC-SHA
-  Supported Clients: YandexBot/Jan 2015, OpenSSL/1.0.2, Yahoo Slurp/Jan 2015, BingPreview/Jan 2015, OpenSSL/1.0.1l, Android/4.4.2, Safari/8/iOS 8.1.2, Safari/8/OS X 10.10, Safari/7/OS X 10.9, Safari/7/iOS 7.1, Safari/6/iOS 6.0.1, Android/5.0.0, Chrome/42/OS X, IE/11/Win 8.1, IE/11/Win 7, Java/8u31, IE Mobile/11/Win Phone 8.1, Googlebot/Feb 2015, Firefox/37/OS X, Firefox/31.3.0 ESR/Win 7, Android/4.2.2, Android/4.0.4, Baidu/Jan 2015, Safari/5.1.9/OS X 10.6.8, Android/4.1.1, Safari/6.0.4/OS X 10.8.4, Android/4.3, OpenSSL/0.9.8y, IE/7/Vista, IE/8-10/Win 7, IE Mobile/10/Win Phone 8.0, Java/7u25, Java/6u45, Android/2.3.7, IE/8/XP
+  Could Also Offer: AES128-GCM-SHA256, AES128-SHA, AES128-SHA256, AES256-GCM-SHA384, AES256-SHA, AES256-SHA256, CAMELLIA128-SHA, CAMELLIA256-SHA, DH-DSS-AES128-GCM-SHA256, DH-DSS-AES128-SHA, DH-DSS-AES128-SHA256, DH-DSS-AES256-GCM-SHA384, DH-DSS-AES256-SHA, DH-DSS-AES256-SHA256, DH-DSS-CAMELLIA128-SHA, DH-DSS-CAMELLIA256-SHA, DH-RSA-AES128-GCM-SHA256, DH-RSA-AES128-SHA, DH-RSA-AES128-SHA256, DH-RSA-AES256-GCM-SHA384, DH-RSA-AES256-SHA, DH-RSA-AES256-SHA256, DH-RSA-CAMELLIA128-SHA, DH-RSA-CAMELLIA256-SHA, DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-DSS-AES256-SHA256, DHE-DSS-CAMELLIA128-SHA, DHE-DSS-CAMELLIA256-SHA, DHE-RSA-CAMELLIA128-SHA, DHE-RSA-CAMELLIA256-SHA, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, SRP-AES-128-CBC-SHA, SRP-AES-256-CBC-SHA, SRP-DSS-AES-128-CBC-SHA, SRP-DSS-AES-256-CBC-SHA, SRP-RSA-AES-128-CBC-SHA, SRP-RSA-AES-256-CBC-SHA
+  Supported Clients: OpenSSL/1.0.2, OpenSSL/1.0.1l, BingPreview/Jan 2015, YandexBot/Jan 2015, Yahoo Slurp/Jan 2015, Android/4.4.2, Safari/7/iOS 7.1, Safari/8/OS X 10.10, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, Safari/6/iOS 6.0.1, Chrome/42/OS X, IE/11/Win 8.1, IE/11/Win 7, Android/5.0.0, Java/8u31, IE Mobile/11/Win Phone 8.1, Googlebot/Feb 2015, Firefox/31.3.0 ESR/Win 7, Firefox/37/OS X, Android/4.1.1, Android/4.0.4, Baidu/Jan 2015, Safari/6.0.4/OS X 10.8.4, Android/4.2.2, Android/4.3, Safari/5.1.9/OS X 10.6.8, IE/8-10/Win 7, IE/7/Vista, OpenSSL/0.9.8y, IE Mobile/10/Win Phone 8.0, Java/7u25, Android/2.3.7, Java/6u45, IE/8/XP
 
 PORT 993
 --------
@@ -299,13 +270,13 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
   * OpenSSL Heartbleed:
       OK - Not vulnerable to Heartbleed  
 
-  * SSLV2 Cipher Suites:
-      Server rejected all cipher suites.
-
   * Session Resumption:
       With Session IDs:                  NOT SUPPORTED (0 successful, 5 failed, 0 errors, 5 total attempts).
       With TLS Session Tickets:          NOT SUPPORTED - TLS ticket assigned but not accepted.
 
+  * SSLV2 Cipher Suites:
+      Server rejected all cipher suites.
+
   * TLSV1_2 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES256-SHA          ECDH-384 bits  256 bits                                         
@@ -336,9 +307,6 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
                  CAMELLIA128-SHA               -              128 bits                                         
                  AES128-SHA                    -              128 bits                                         
 
-  * SSLV3 Cipher Suites:
-      Server rejected all cipher suites.
-
   * TLSV1 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES256-SHA          ECDH-384 bits  256 bits                                         
@@ -352,11 +320,14 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
                  DHE-RSA-CAMELLIA128-SHA       DH-1024 bits   128 bits                                         
                  DHE-RSA-AES128-SHA            DH-1024 bits   128 bits                                         
                  CAMELLIA128-SHA               -              128 bits                                         
-                 AES128-SHA                    -              128 bits
+                 AES128-SHA                    -              128 bits                                         
+
+  * SSLV3 Cipher Suites:
+      Server rejected all cipher suites.
 
   Should Not Offer: AES128-SHA, AES256-SHA, CAMELLIA128-SHA, CAMELLIA256-SHA, DHE-RSA-CAMELLIA128-SHA, DHE-RSA-CAMELLIA256-SHA
   Could Also Offer: DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-RSA-AES128-GCM-SHA256, DHE-RSA-AES128-SHA256, DHE-RSA-AES256-GCM-SHA384, DHE-RSA-AES256-SHA256, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, ECDHE-RSA-AES128-GCM-SHA256, ECDHE-RSA-AES128-SHA256, ECDHE-RSA-AES256-GCM-SHA384, ECDHE-RSA-AES256-SHA384
-  Supported Clients: OpenSSL/1.0.2, Baidu/Jan 2015, Yahoo Slurp/Jan 2015, BingPreview/Jan 2015, OpenSSL/1.0.1l, Firefox/31.3.0 ESR/Win 7, Googlebot/Feb 2015, Android/4.2.2, Android/5.0.0, Android/4.0.4, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, YandexBot/Jan 2015, Safari/8/OS X 10.10, Safari/7/iOS 7.1, Chrome/42/OS X, Safari/5.1.9/OS X 10.6.8, Android/4.1.1, Firefox/37/OS X, Safari/6.0.4/OS X 10.8.4, Android/4.3, Safari/6/iOS 6.0.1, Android/4.4.2, OpenSSL/0.9.8y, IE Mobile/11/Win Phone 8.1, IE/7/Vista, IE/11/Win 8.1, IE/11/Win 7, IE/8-10/Win 7, IE Mobile/10/Win Phone 8.0, Java/8u31, Java/7u25, Java/6u45, Android/2.3.7
+  Supported Clients: OpenSSL/1.0.2, Firefox/31.3.0 ESR/Win 7, OpenSSL/1.0.1l, BingPreview/Jan 2015, Yahoo Slurp/Jan 2015, Baidu/Jan 2015, Safari/7/iOS 7.1, Chrome/42/OS X, Googlebot/Feb 2015, Android/4.0.4, Safari/8/iOS 8.1.2, Android/4.1.1, Android/5.0.0, Safari/6/iOS 6.0.1, YandexBot/Jan 2015, Safari/6.0.4/OS X 10.8.4, Android/4.2.2, Safari/8/OS X 10.10, Firefox/37/OS X, Safari/7/OS X 10.9, Android/4.3, Safari/5.1.9/OS X 10.6.8, Android/4.4.2, IE/8-10/Win 7, IE/7/Vista, IE/11/Win 8.1, IE/11/Win 7, OpenSSL/0.9.8y, IE Mobile/10/Win Phone 8.0, IE Mobile/11/Win Phone 8.1, Java/7u25, Java/8u31, Java/6u45, Android/2.3.7
 
 PORT 995
 --------
@@ -370,13 +341,13 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
   * OpenSSL Heartbleed:
       OK - Not vulnerable to Heartbleed  
 
-  * SSLV2 Cipher Suites:
-      Server rejected all cipher suites.
-
   * Session Resumption:
       With Session IDs:                  NOT SUPPORTED (0 successful, 5 failed, 0 errors, 5 total attempts).
       With TLS Session Tickets:          NOT SUPPORTED - TLS ticket assigned but not accepted.
 
+  * SSLV2 Cipher Suites:
+      Server rejected all cipher suites.
+
   * TLSV1_2 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES256-SHA          ECDH-384 bits  256 bits                                         
@@ -407,9 +378,6 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
                  CAMELLIA128-SHA               -              128 bits                                         
                  AES128-SHA                    -              128 bits                                         
 
-  * SSLV3 Cipher Suites:
-      Server rejected all cipher suites.
-
   * TLSV1 Cipher Suites:
       Preferred:                       
                  ECDHE-RSA-AES256-SHA          ECDH-384 bits  256 bits                                         
@@ -423,9 +391,12 @@ _nassl.OpenSSLError - error:140940F5:SSL routines:ssl3_read_bytes:unexpected rec
                  DHE-RSA-CAMELLIA128-SHA       DH-1024 bits   128 bits                                         
                  DHE-RSA-AES128-SHA            DH-1024 bits   128 bits                                         
                  CAMELLIA128-SHA               -              128 bits                                         
-                 AES128-SHA                    -              128 bits
+                 AES128-SHA                    -              128 bits                                         
+
+  * SSLV3 Cipher Suites:
+      Server rejected all cipher suites.
 
   Should Not Offer: AES128-SHA, AES256-SHA, CAMELLIA128-SHA, CAMELLIA256-SHA, DHE-RSA-CAMELLIA128-SHA, DHE-RSA-CAMELLIA256-SHA
   Could Also Offer: DHE-DSS-AES128-GCM-SHA256, DHE-DSS-AES128-SHA256, DHE-DSS-AES256-GCM-SHA384, DHE-DSS-AES256-SHA, DHE-RSA-AES128-GCM-SHA256, DHE-RSA-AES128-SHA256, DHE-RSA-AES256-GCM-SHA384, DHE-RSA-AES256-SHA256, ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES256-SHA384, ECDHE-RSA-AES128-GCM-SHA256, ECDHE-RSA-AES128-SHA256, ECDHE-RSA-AES256-GCM-SHA384, ECDHE-RSA-AES256-SHA384
-  Supported Clients: OpenSSL/1.0.2, Baidu/Jan 2015, Yahoo Slurp/Jan 2015, BingPreview/Jan 2015, OpenSSL/1.0.1l, Firefox/31.3.0 ESR/Win 7, Googlebot/Feb 2015, Android/4.2.2, Android/5.0.0, Android/4.0.4, Safari/8/iOS 8.1.2, Safari/7/OS X 10.9, YandexBot/Jan 2015, Safari/8/OS X 10.10, Safari/7/iOS 7.1, Chrome/42/OS X, Safari/5.1.9/OS X 10.6.8, Android/4.1.1, Firefox/37/OS X, Safari/6.0.4/OS X 10.8.4, Android/4.3, Safari/6/iOS 6.0.1, Android/4.4.2, OpenSSL/0.9.8y, IE Mobile/11/Win Phone 8.1, IE/7/Vista, IE/11/Win 8.1, IE/11/Win 7, IE/8-10/Win 7, IE Mobile/10/Win Phone 8.0, Java/8u31, Java/7u25, Java/6u45, Android/2.3.7
+  Supported Clients: OpenSSL/1.0.2, Firefox/31.3.0 ESR/Win 7, OpenSSL/1.0.1l, BingPreview/Jan 2015, Yahoo Slurp/Jan 2015, Baidu/Jan 2015, Safari/7/iOS 7.1, Chrome/42/OS X, Googlebot/Feb 2015, Android/4.0.4, Safari/8/iOS 8.1.2, Android/4.1.1, Android/5.0.0, Safari/6/iOS 6.0.1, YandexBot/Jan 2015, Safari/6.0.4/OS X 10.8.4, Android/4.2.2, Safari/8/OS X 10.10, Firefox/37/OS X, Safari/7/OS X 10.9, Android/4.3, Safari/5.1.9/OS X 10.6.8, Android/4.4.2, IE/8-10/Win 7, IE/7/Vista, IE/11/Win 8.1, IE/11/Win 7, OpenSSL/0.9.8y, IE Mobile/10/Win Phone 8.0, IE Mobile/11/Win Phone 8.1, Java/7u25, Java/8u31, Java/6u45, Android/2.3.7