release v0.06

partialy reverts 93a722f; closes #287

CHANGELOG.md

@@ -0,0 +1,127 @@
+CHANGELOG
+=========
+
+v0.06 (January 4, 2015)
+-----------------------
+
+Mail:
+
+* Set better default system limits to accommodate boxes handling mail for 20+ users.
+
+Contacts/calendar:
+
+* Update to ownCloud to 7.0.4.
+* Contacts syncing via ActiveSync wasn't working.
+
+Control panel:
+
+* New control panel for setting custom DNS settings (without having to use the API).
+* Status checks showed a false positive for Spamhause blacklists and for secondary DNS in some cases.
+* Status checks would fail to load if openssh-sever was not pre-installed, but openssh-server is not required.
+* The local DNS cache is cleared before running the status checks using 'rncd' now rather than restarting 'bind9', which should be faster and wont interrupt other services.
+* Multi-domain and wildcard certificate can now be installed through the control panel.
+* The DNS API now allows the setting of SRV records.
+
+Misc:
+
+* IPv6 configuration error in postgrey, nginx.
+* Missing dependency on sudo.
+
+v0.05 (November 18, 2014)
+-------------------------
+
+Mail:
+
+* The maximum size of outbound mail sent via webmail and Exchange/ActiveSync has been increased to 128 MB, the same as when using SMTP.
+* Spam is no longer wrapped as an attachment inside a scary Spamassassin explanation. The original message is simply moved straight to the Spam folder unchanged.
+* There is a new iOS/Mac OS X Configuration Profile link in the control panel which makes it easier to configure IMAP/SMTP/CalDAV/CardDAV on iOS devices and Macs.
+* "Domain aliases" can now be configured in the control panel.
+* Updated to [Roundcube 1.0.3](http://trac.roundcube.net/wiki/Changelog).
+* IMAP/SMTP is now recommended even on iOS devices as Exchange/ActiveSync is terribly buggy.
+
+Control panel:
+
+* Installing an SSL certificate for the primary hostname would cause problems until a restart (services needed to be restarted).
+* Installing SSL certificates would fail if /tmp was on a different filesystem.
+* Better error messages when installing a SSL certificate fails.
+* The local DNS cache is now cleared each time the system status checks are run.
+* Documented how to use +tag addressing.
+* Minor UI tweaks.
+
+Other:
+
+* Updated to [ownCloud 7.0.3](http://owncloud.org/changelog/).
+* The ownCloud API is now exposed properly.
+* DNSSEC now works on `.guide` domains now too (RSASHA256).
+
+v0.04 (October 15, 2014)
+------------------------
+
+Breaking changes:
+
+* On-disk backups are now retained for a minimum of 3 days instead of 14. Beyond that the user is responsible for making off-site copies.
+* IMAP no longer supports the legacy SSLv3 protocol. SSLv3 is now known to be insecure. I don't believe any modern devices will be affected by this. HTTPS and SMTP submission already had SSLv3 disabled.
+
+Control panel:
+
+* The control panel has a new page for installing SSL certificates.
+* The control panel has a new page for hosting static websites.
+* The control panel now shows mailbox sizes on disk.
+* It is now possible to create catch-all aliases from the control panel.
+* Many usability improvements in the control panel.
+
+DNS:
+
+* Custom DNS A/AAAA records on subdomains were ignored.
+* It is now possible to set up a secondary DNS server.
+* DNS zones were updating even when nothing changed.
+* Strict SPF and DMARC settings are now set on all subdomains not used for mail.
+
+Security:
+
+* DNSSEC is now supported for the .email TLD which required a different key algorithm.
+* Nginx and Postfix now use 2048 bits of DH parameters instead of 1024.
+
+Other:
+
+* Spam filter learning by dragging mail in and out of the Spam folder should hopefully be working now.
+* Some things were broken if the machine had an IPv6 address.
+* Other things were broken if the machine was on a non-utf8 locale.
+* No longer implementing webfinger.
+* Removes apache before installing nginx, in case it has been installed by distro.
+
+v0.03 (September 24, 2014)
+--------------------------
+
+* Update existing installs of Roundcube.
+* Disabled catch-alls pending figuring out how to get users to take precedence.
+* Z-Push was not working because in v0.02 we had accidentally moved to a different version.
+* Z-Push is now locked to a specific commit so it doesn't change on us accidentally.
+* The start script is now symlinked to /usr/local/bin/mailinabox.
+
+v0.02 (September 21, 2014)
+--------------------------
+
+* Open the firewall to an alternative SSH port if set.
+* Fixed missing dependencies.
+* Set Z-Push to use sync command with ownCloud.
+* Support more concurrent connections for z-push.
+* In the status checks, handle wildcard certificates.
+* Show the status of backups in the control panel.
+* The control panel can now update a user's password.
+* Some usability improvements in the control panel.
+* Warn if a SSL cert is expiring in 30 days.
+* Use SHA2 to generate CSRs.
+* Better logic for determining when to take a full backup.
+* Reduce DNS TTL, not that it seems to really matter.
+* Add SSHFP DNS records.
+* Add an API for setting custom DNS records 
+* Update to ownCloud 7.0.2.
+* Some things were broken if the machine had an IPv6 address.
+* Use a dialogs library to ask users questions during setup.
+* Other fixes.
+
+v0.01 (August 19, 2014)
+-----------------------
+
+First release.

README.md

@@ -33,7 +33,7 @@ The Acknowledgements
 
 This project was inspired in part by the ["NSA-proof your email in 2 hours"](http://sealedabstract.com/code/nsa-proof-your-e-mail-in-2-hours/) blog post by Drew Crawford, [Sovereign](https://github.com/al3x/sovereign) by Alex Payne, and conversations with <a href="http://twitter.com/shevski" target="_blank">@shevski</a>, <a href="https://github.com/konklone" target="_blank">@konklone</a>, and <a href="https://github.com/gregelin" target="_blank">@GregElin</a>.
 
-Mail-in-a-Box is similar to [iRedMail](http://www.iredmail.org/).
+Mail-in-a-Box is similar to [iRedMail](http://www.iredmail.org/) and [Modoboa](https://github.com/tonioo/modoboa).
 
 The History
 -----------

conf/ios-profile.xml

@@ -0,0 +1,128 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<!--
+ iOS/OS X Configuration Profile
+
+ Mobileconfig for iOS/OS X users to setup IMAP, SMTP, Contacts & Calendar
+
+ https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProfileRef/Introduction/Introduction.html
+-->
+<plist version="1.0">
+<dict>
+  <key>PayloadContent</key>
+  <array>
+    <dict>
+      <key>CalDAVAccountDescription</key>
+      <string>PRIMARY_HOSTNAME calendar</string>
+      <key>CalDAVHostName</key>
+      <string>PRIMARY_HOSTNAME</string>
+      <key>CalDAVPort</key>
+      <real>443</real>
+      <key>CalDAVPrincipalURL</key>
+      <string>/cloud/remote.php/caldav/calendars/</string>
+      <key>CalDAVUseSSL</key>
+      <true/>
+      <key>PayloadDescription</key>
+      <string>PRIMARY_HOSTNAME (Mail-in-a-Box)</string>
+      <key>PayloadDisplayName</key>
+      <string>PRIMARY_HOSTNAME calendar</string>
+      <key>PayloadIdentifier</key>
+      <string>email.mailinabox.mobileconfig.PRIMARY_HOSTNAME.CalDAV</string>
+      <key>PayloadOrganization</key>
+      <string></string>
+      <key>PayloadType</key>
+      <string>com.apple.caldav.account</string>
+      <key>PayloadUUID</key>
+      <string>UUID1</string>
+      <key>PayloadVersion</key>
+      <integer>1</integer>
+    </dict>
+    <dict>
+      <key>EmailAccountDescription</key>
+      <string>PRIMARY_HOSTNAME mail</string>
+      <key>EmailAccountType</key>
+      <string>EmailTypeIMAP</string>
+      <key>IncomingMailServerAuthentication</key>
+      <string>EmailAuthPassword</string>
+      <key>IncomingMailServerHostName</key>
+      <string>PRIMARY_HOSTNAME</string>
+      <key>IncomingMailServerPortNumber</key>
+      <integer>993</integer>
+      <key>IncomingMailServerUseSSL</key>
+      <true/>
+      <key>OutgoingMailServerAuthentication</key>
+      <string>EmailAuthPassword</string>
+      <key>OutgoingMailServerHostName</key>
+      <string>PRIMARY_HOSTNAME</string>
+      <key>OutgoingMailServerPortNumber</key>
+      <integer>587</integer>
+      <key>OutgoingMailServerUseSSL</key>
+      <true/>
+      <key>OutgoingPasswordSameAsIncomingPassword</key>
+      <true/>
+      <key>PayloadDescription</key>
+      <string>PRIMARY_HOSTNAME (Mail-in-a-Box)</string>
+      <key>PayloadDisplayName</key>
+      <string>PRIMARY_HOSTNAME mail</string>
+      <key>PayloadIdentifier</key>
+      <string>email.mailinabox.mobileconfig.PRIMARY_HOSTNAME.E-Mail</string>
+      <key>PayloadOrganization</key>
+      <string></string>
+      <key>PayloadType</key>
+      <string>com.apple.mail.managed</string>
+      <key>PayloadUUID</key>
+      <string>UUID2</string>
+      <key>PayloadVersion</key>
+      <integer>1</integer>
+      <key>PreventAppSheet</key>
+      <false/>
+      <key>PreventMove</key>
+      <false/>
+      <key>SMIMEEnabled</key>
+      <false/>
+    </dict>
+    <dict>
+      <key>CardDAVAccountDescription</key>
+      <string>PRIMARY_HOSTNAME contacts</string>
+      <key>CardDAVHostName</key>
+      <string>PRIMARY_HOSTNAME</string>
+      <key>CardDAVPort</key>
+      <integer>443</integer>
+      <key>CardDAVPrincipalURL</key>
+      <string>/cloud/remote.php/carddav/addressbooks/</string>
+      <key>CardDAVUseSSL</key>
+      <true/>
+      <key>PayloadDescription</key>
+      <string>PRIMARY_HOSTNAME (Mail-in-a-Box)</string>
+      <key>PayloadDisplayName</key>
+      <string>PRIMARY_HOSTNAME contacts</string>
+      <key>PayloadIdentifier</key>
+      <string>email.mailinabox.mobileconfig.PRIMARY_HOSTNAME.carddav</string>
+      <key>PayloadOrganization</key>
+      <string></string>
+      <key>PayloadType</key>
+      <string>com.apple.carddav.account</string>
+      <key>PayloadUUID</key>
+      <string>UUID3</string>
+      <key>PayloadVersion</key>
+      <integer>1</integer>
+    </dict>
+  </array>
+  <key>PayloadDescription</key>
+  <string>PRIMARY_HOSTNAME (Mail-in-a-Box)</string>
+  <key>PayloadDisplayName</key>
+  <string>PRIMARY_HOSTNAME</string>
+  <key>PayloadIdentifier</key>
+  <string>email.mailinabox.mobileconfig.PRIMARY_HOSTNAME</string>
+  <key>PayloadOrganization</key>
+  <string></string>
+  <key>PayloadRemovalDisallowed</key>
+  <false/>
+  <key>PayloadType</key>
+  <string>Configuration</string>
+  <key>PayloadUUID</key>
+  <string>UUID4</string>
+  <key>PayloadVersion</key>
+  <integer>1</integer>
+</dict>
+</plist>

conf/management-initscript

@@ -25,6 +25,16 @@ SCRIPTNAME=/etc/init.d/$NAME
 START=yes
 EXEC_AS_USER=root
 
+# Ensure Python reads/writes files in UTF-8. If the machine
+# triggers some other locale in Python, like ASCII encoding,
+# Python may not be able to read/write files. Here and in
+# setup/start.sh (where the locale is also installed if not
+# already present).
+export LANGUAGE=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+export LANG=en_US.UTF-8
+export LC_TYPE=en_US.UTF-8
+
 # Read configuration variable file if it is present
 [ -r /etc/default/$NAME ] && . /etc/default/$NAME
 

conf/nginx-primaryonly.conf

@@ -1,7 +1,9 @@
 	# Control Panel
+	# Proxy /admin to our Python based control panel daemon. It is
+	# listening on IPv4 only so use an IP address and not 'localhost'.
 	rewrite ^/admin$ /admin/;
 	location /admin/ {
-		proxy_pass http://localhost:10222/;
+		proxy_pass http://127.0.0.1:10222/;
 		proxy_set_header X-Forwarded-For $remote_addr;
 	}
 
@@ -16,8 +18,12 @@
 			deny all;
 	 	}
 	}
-	location ~ ^(/cloud)(/[^/]+\.php)(/.*)?$ {
+	location ~ ^(/cloud)((?:/ocs)?/[^/]+\.php)(/.*)?$ {
 		# note: ~ has precendence over a regular location block
+		# Accept URLs like:
+		# /cloud/index.php/apps/files/
+		# /cloud/index.php/apps/files/ajax/scan.php (it's really index.php; see 6fdef379adfdeac86cc2220209bdf4eb9562268d)
+		# /cloud/ocs/v1.php/apps/files_sharing/api/v1 (see #240)
 		include fastcgi_params;
 		fastcgi_param SCRIPT_FILENAME /usr/local/lib/owncloud/$2;
 		fastcgi_param SCRIPT_NAME $1$2;

conf/nginx-ssl.conf

@@ -55,7 +55,7 @@ spdy_headers_comp 0;
 #   openssl dhparam -outform pem -out dhparam2048.pem 2048
 # 
 # Note: raising the bits to 2048 excludes Java 6 clients. Comment out if a problem.
-#ssl_dhparam /path/to/dhparam2048.pem;
+ssl_dhparam STORAGE_ROOT/ssl/dh2048.pem;
 
 
 # OCSP stapling - means nginx will poll the CA for signed OCSP responses, 

conf/nginx.conf

@@ -13,6 +13,7 @@ server {
 # The secure HTTPS server.
 server {
 	listen 443 ssl;
+	listen [::]:443 ssl;
 
 	server_name $HOSTNAME;
 
@@ -24,6 +25,20 @@ server {
 	root $ROOT;
 	index index.html index.htm;
 
+	location = /robots.txt {
+		log_not_found off;
+		access_log off;
+	}
+
+	location = /favicon.ico {
+		log_not_found off;
+		access_log off;
+	}
+
+	location = /mailinabox.mobileconfig {
+		alias /var/lib/mailinabox/mobileconfig.xml;
+	}
+
 	# Roundcube Webmail configuration.
 	rewrite ^/mail$ /mail/ redirect;
 	rewrite ^/mail/$ /mail/index.php;
@@ -42,14 +57,10 @@ server {
 		fastcgi_index index.php;
 		fastcgi_param SCRIPT_FILENAME /usr/local/lib/roundcubemail/$fastcgi_script_name;
 		fastcgi_pass php-fpm;
-		client_max_body_size 20M;
-	}
 
-	# Webfinger configuration.
-	location = /.well-known/webfinger {
-		include fastcgi_params;
-		fastcgi_param SCRIPT_FILENAME /usr/local/bin/mailinabox-webfinger.php;
-		fastcgi_pass php-fpm;
+		# Outgoing mail also goes through this endpoint, so increase the maximum
+		# file upload limit to match the corresponding Postfix limit.
+		client_max_body_size 128M;
 	}
 
 	# Z-Push (Microsoft Exchange ActiveSync)
@@ -59,6 +70,10 @@ server {
 		fastcgi_param PHP_VALUE "include_path=.:/usr/share/php:/usr/share/pear:/usr/share/awl/inc";
 		fastcgi_read_timeout 630;
 		fastcgi_pass php-fpm;
+
+		# Outgoing mail also goes through this endpoint, so increase the maximum
+		# file upload limit to match the corresponding Postfix limit.
+		client_max_body_size 128M;
 	}
 	location /autodiscover/autodiscover.xml {
 		include fastcgi_params;
@@ -70,4 +85,3 @@ server {
 
 	# ADDITIONAL DIRECTIVES HERE
 }
-

conf/sieve-spam.txt

@@ -1,7 +1,6 @@
 require ["regex", "fileinto", "imap4flags"];
 
 if allof (header :regex "X-Spam-Status" "^Yes") {
-  setflag "\\Seen";
   fileinto "Spam";
   stop;
 }

conf/zpush/backend_caldav.php

@@ -9,10 +9,6 @@ define('CALDAV_SERVER', 'https://localhost');
 define('CALDAV_PORT', '443');
 define('CALDAV_PATH', '/caldav/calendars/%u/');
 define('CALDAV_PERSONAL', '');
-
-// If the CalDAV server supports the sync-collection operation
-// DAViCal and SOGo support it
-// Setting this to false will work with most servers, but it will be slower
-define('CALDAV_SUPPORTS_SYNC', false);
+define('CALDAV_SUPPORTS_SYNC', true);
 
 ?>

conf/zpush/backend_carddav.php

@@ -14,14 +14,8 @@ define('CARDDAV_DEFAULT_PATH', '/carddav/addressbooks/%u/contacts/'); /* subdire
 define('CARDDAV_GAL_PATH', ''); /* readonly, searchable, not syncd */
 define('CARDDAV_GAL_MIN_LENGTH', 5);
 define('CARDDAV_CONTACTS_FOLDER_NAME', '%u Addressbook');
-
-
-// If the CardDAV server supports the sync-collection operation
-// DAViCal supports it, but SabreDav, Owncloud, SOGo don't
-// Setting this to false will work with most servers, but it will be slower: 1 petition for the href of vcards, and 1 petition for each vcard
 define('CARDDAV_SUPPORTS_SYNC', false);
 
-
 // If the CardDAV server supports the FN attribute for searches
 // DAViCal supports it, but SabreDav, Owncloud and SOGo don't
 // Setting this to true will search by FN. If false will search by sn, givenName and email

management/backup.py

@@ -16,7 +16,7 @@ from utils import exclusive_process, load_environment, shell
 
 # destroy backups when the most recent increment in the chain
 # that depends on it is this many days old.
-keep_backups_for_days = 14
+keep_backups_for_days = 3
 
 def backup_status(env):
 	# What is the current status of backups?
@@ -25,8 +25,11 @@ def backup_status(env):
 	# see how large the storage is.
 
 	now = datetime.datetime.now(dateutil.tz.tzlocal())
-	def reldate(date, ref):
+	def reldate(date, ref, clip):
+		if ref < date: return clip
 		rd = dateutil.relativedelta.relativedelta(ref, date)
+		if rd.months > 1: return "%d months, %d days" % (rd.months, rd.days)
+		if rd.months == 1: return "%d month, %d days" % (rd.months, rd.days)
 		if rd.days >= 7: return "%d days" % rd.days
 		if rd.days > 1: return "%d days, %d hours" % (rd.days, rd.hours)
 		if rd.days == 1: return "%d day, %d hours" % (rd.days, rd.hours)
@@ -35,6 +38,7 @@ def backup_status(env):
 	backups = { }
 	basedir = os.path.join(env['STORAGE_ROOT'], 'backup/duplicity/')
 	encdir = os.path.join(env['STORAGE_ROOT'], 'backup/encrypted/')
+	os.makedirs(basedir, exist_ok=True) # os.listdir fails if directory does not exist
 	for fn in os.listdir(basedir):
 		m = re.match(r"duplicity-(full|full-signatures|(inc|new-signatures)\.(?P<incbase>\d+T\d+Z)\.to)\.(?P<date>\d+T\d+Z)\.", fn)
 		if not m: raise ValueError(fn)
@@ -45,7 +49,7 @@ def backup_status(env):
 			backups[key] = {
 				"date": m.group("date"),
 				"date_str": date.strftime("%x %X"),
-				"date_delta": reldate(date, now),
+				"date_delta": reldate(date, now, "the future?"),
 				"full": m.group("incbase") is None,
 				"previous": m.group("incbase"),
 				"size": 0,
@@ -78,7 +82,7 @@ def backup_status(env):
 			deleted_in = None
 		elif saw_full and not deleted_in:
 			# Mark deleted_in only on the first increment after a full backup.
-			deleted_in = reldate(days_ago, dateutil.parser.parse(bak["date"]))
+			deleted_in = reldate(days_ago, dateutil.parser.parse(bak["date"]), "on next daily backup")
 			bak["deleted_in"] = deleted_in
 
 	return {

management/buy_certificate.py

@@ -108,7 +108,7 @@ def buy_ssl_certificate(api_key, domain, command, env):
 
 		# Check before we overwrite something we shouldn't.
 		if os.path.exists(ssl_certificate):
-			cert_status = check_certificate(None, ssl_certificate, None)
+			cert_status, cert_status_details = check_certificate(None, ssl_certificate, None)
 			if cert_status != "SELF-SIGNED":
 				print("Please back up and delete the file %s so I can save your new certificate." % ssl_certificate)
 				sys.exit(1)

management/daemon.py

@@ -7,9 +7,9 @@ from functools import wraps
 from flask import Flask, request, render_template, abort, Response
 
 import auth, utils
-from mailconfig import get_mail_users, add_mail_user, set_mail_password, remove_mail_user, get_archived_mail_users
+from mailconfig import get_mail_users, get_mail_users_ex, get_admins, add_mail_user, set_mail_password, remove_mail_user
 from mailconfig import get_mail_user_privileges, add_remove_mail_user_privilege
-from mailconfig import get_mail_aliases, get_mail_domains, add_mail_alias, remove_mail_alias
+from mailconfig import get_mail_aliases, get_mail_aliases_ex, get_mail_domains, add_mail_alias, remove_mail_alias
 
 env = utils.load_environment()
 
@@ -71,9 +71,10 @@ def json_response(data):
 def index():
 	# Render the control panel. This route does not require user authentication
 	# so it must be safe!
-	no_admins_exist = (len([user for user in get_mail_users(env, as_json=True) if "admin" in user['privileges']]) == 0)
+	no_admins_exist = (len(get_admins(env)) == 0)
 	return render_template('index.html',
 		hostname=env['PRIMARY_HOSTNAME'],
+		storage_root=env['STORAGE_ROOT'],
 		no_admins_exist=no_admins_exist,
 	)
 
@@ -97,7 +98,7 @@ def me():
 @authorized_personnel_only
 def mail_users():
 	if request.args.get("format", "") == "json":
-		return json_response(get_mail_users(env, as_json=True) + get_archived_mail_users(env))
+		return json_response(get_mail_users_ex(env, with_archived=True, with_slow_info=True))
 	else:
 		return "".join(x+"\n" for x in get_mail_users(env))
 
@@ -145,7 +146,7 @@ def mail_user_privs_remove():
 @authorized_personnel_only
 def mail_aliases():
 	if request.args.get("format", "") == "json":
-		return json_response(get_mail_aliases(env, as_json=True))
+		return json_response(get_mail_aliases_ex(env))
 	else:
 		return "".join(x+"\t"+y+"\n" for x, y in get_mail_aliases(env))
 
@@ -171,6 +172,12 @@ def mail_domains():
 
 # DNS
 
+@app.route('/dns/zones')
+@authorized_personnel_only
+def dns_zones():
+	from dns_update import get_dns_zones
+	return json_response([z[0] for z in get_dns_zones(env)])
+
 @app.route('/dns/update', methods=['POST'])
 @authorized_personnel_only
 def dns_update():
@@ -180,6 +187,33 @@ def dns_update():
 	except Exception as e:
 		return (str(e), 500)
 
+@app.route('/dns/secondary-nameserver')
+@authorized_personnel_only
+def dns_get_secondary_nameserver():
+	from dns_update import get_custom_dns_config
+	return json_response({ "hostname": get_custom_dns_config(env).get("_secondary_nameserver") })
+
+@app.route('/dns/secondary-nameserver', methods=['POST'])
+@authorized_personnel_only
+def dns_set_secondary_nameserver():
+	from dns_update import set_secondary_dns
+	try:
+		return set_secondary_dns(request.form.get('hostname'), env)
+	except ValueError as e:
+		return (str(e), 400)
+
+@app.route('/dns/set')
+@authorized_personnel_only
+def dns_get_records():
+	from dns_update import get_custom_dns_config, get_custom_records
+	additional_records = get_custom_dns_config(env)
+	records = get_custom_records(None, additional_records, env)
+	return json_response([{
+		"qname": r[0],
+		"rtype": r[1],
+		"value": r[2],
+		} for r in records])
+
 @app.route('/dns/set/<qname>', methods=['POST'])
 @app.route('/dns/set/<qname>/<rtype>', methods=['POST'])
 @app.route('/dns/set/<qname>/<rtype>/<value>', methods=['POST'])
@@ -209,8 +243,32 @@ def dns_get_dump():
 	from dns_update import build_recommended_dns
 	return json_response(build_recommended_dns(env))
 
+# SSL
+
+@app.route('/ssl/csr/<domain>', methods=['POST'])
+@authorized_personnel_only
+def ssl_get_csr(domain):
+	from web_update import get_domain_ssl_files, create_csr
+	ssl_key, ssl_certificate, csr_path = get_domain_ssl_files(domain, env)
+	return create_csr(domain, ssl_key, env)
+
+@app.route('/ssl/install', methods=['POST'])
+@authorized_personnel_only
+def ssl_install_cert():
+	from web_update import install_cert
+	domain = request.form.get('domain')
+	ssl_cert = request.form.get('cert')
+	ssl_chain = request.form.get('chain')
+	return install_cert(domain, ssl_cert, ssl_chain, env)
+
 # WEB
 
+@app.route('/web/domains')
+@authorized_personnel_only
+def web_get_domains():
+	from web_update import get_web_domains_info
+	return json_response(get_web_domains_info(env))
+
 @app.route('/web/update', methods=['POST'])
 @authorized_personnel_only
 def web_update():
@@ -232,6 +290,8 @@ def system_status():
 			self.items.append({ "type": "ok", "text": message, "extra": [] })
 		def print_error(self, message):
 			self.items.append({ "type": "error", "text": message, "extra": [] })
+		def print_warning(self, message):
+			self.items.append({ "type": "warning", "text": message, "extra": [] })
 		def print_line(self, message, monospace=False):
 			self.items[-1]["extra"].append({ "text": message, "monospace": monospace })
 	output = WebOutput()
@@ -278,5 +338,6 @@ if __name__ == '__main__':
 	# debug console and enter that as the username
 	app.logger.info('API key: ' + auth_service.key)
 
+	# Start the application server. Listens on 127.0.0.1 (IPv4 only).
 	app.run(port=10222)
 

management/dns_update.py

@@ -7,6 +7,7 @@
 import os, os.path, urllib.parse, datetime, re, hashlib, base64
 import ipaddress
 import rtyaml
+import dns.resolver
 
 from mailconfig import get_mail_domains
 from utils import shell, load_env_vars_from_file, safe_domain_name, sort_domains
@@ -55,6 +56,11 @@ def get_custom_dns_config(env):
 	except:
 		return { }
 
+def write_custom_dns_config(config, env):
+	config_yaml = rtyaml.dump(config)
+	with open(os.path.join(env['STORAGE_ROOT'], 'dns/custom.yaml'), "w") as f:
+		f.write(config_yaml)
+
 def do_dns_update(env, force=False):
 	# What domains (and their zone filenames) should we build?
 	domains = get_dns_domains(env)
@@ -105,7 +111,7 @@ def do_dns_update(env, force=False):
 		zonefiles[i][1] += ".signed"
 
 	# Write the main nsd.conf file.
-	if write_nsd_conf(zonefiles, env):
+	if write_nsd_conf(zonefiles, additional_records, env):
 		# Make sure updated_domains contains *something* if we wrote an updated
 		# nsd.conf so that we know to restart nsd.
 		if len(updated_domains) == 0:
@@ -134,12 +140,22 @@ def do_dns_update(env, force=False):
 def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 	records = []
 
-	# For top-level zones, define ourselves as the authoritative name server.
+	# For top-level zones, define the authoritative name servers.
+	#
+	# Normally we are our own nameservers. Some TLDs require two distinct IP addresses,
+	# so we allow the user to override the second nameserver definition so that
+	# secondary DNS can be set up elsewhere.
+	#
 	# 'False' in the tuple indicates these records would not be used if the zone
 	# is managed outside of the box.
 	if is_zone:
+		# Obligatory definition of ns1.PRIMARY_HOSTNAME.
 		records.append((None,  "NS",  "ns1.%s." % env["PRIMARY_HOSTNAME"], False))
-		records.append((None,  "NS",  "ns2.%s." % env["PRIMARY_HOSTNAME"], False))
+
+		# Define ns2.PRIMARY_HOSTNAME or whatever the user overrides.
+		secondary_ns = additional_records.get("_secondary_nameserver", "ns2." + env["PRIMARY_HOSTNAME"])
+		records.append((None,  "NS", secondary_ns+'.', False))
+
 
 	# In PRIMARY_HOSTNAME...
 	if domain == env["PRIMARY_HOSTNAME"]:
@@ -176,7 +192,7 @@ def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 	subdomains = [d for d in all_domains if d.endswith("." + domain)]
 	for subdomain in subdomains:
 		subdomain_qname = subdomain[0:-len("." + domain)]
-		subzone = build_zone(subdomain, [], {}, env, is_zone=False)
+		subzone = build_zone(subdomain, [], additional_records, env, is_zone=False)
 		for child_qname, child_rtype, child_value, child_explanation in subzone:
 			if child_qname == None:
 				child_qname = subdomain_qname
@@ -184,9 +200,9 @@ def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 				child_qname += "." + subdomain_qname
 			records.append((child_qname, child_rtype, child_value, child_explanation))
 
-	def has_rec(qname, rtype):
+	def has_rec(qname, rtype, prefix=None):
 		for rec in records:
-			if rec[0] == qname and rec[1] == rtype:
+			if rec[0] == qname and rec[1] == rtype and (prefix is None or rec[2].startswith(prefix)):
 				return True
 		return False
 
@@ -195,7 +211,7 @@ def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 		if has_rec(qname, rtype): continue
 		records.append((qname, rtype, value, "(Set by user.)"))
 
-	# Add defaults if not overridden by the user's custom settings.
+	# Add defaults if not overridden by the user's custom settings (and not otherwise configured).
 	defaults = [
 		(None,  "A",    env["PUBLIC_IP"],       "Required. May have a different value. Sets the IP address that %s resolves to for web hosting and other services besides mail. The A record must be present but its value does not affect mail delivery." % domain),
 		("www", "A",    env["PUBLIC_IP"],       "Optional. Sets the IP address that www.%s resolves to, e.g. for web hosting." % domain),
@@ -208,17 +224,25 @@ def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 		if not has_rec(qname, rtype):
 			records.append((qname, rtype, value, explanation))
 
-	# If OpenDKIM is in use..
+	# Append the DKIM TXT record to the zone as generated by OpenDKIM.
 	opendkim_record_file = os.path.join(env['STORAGE_ROOT'], 'mail/dkim/mail.txt')
-	if os.path.exists(opendkim_record_file):
-		# Append the DKIM TXT record to the zone as generated by OpenDKIM, after string formatting above.
-		with open(opendkim_record_file) as orf:
-			m = re.match(r'(\S+)\s+IN\s+TXT\s+\( "([^"]+)"\s+"([^"]+)"\s*\)', orf.read(), re.S)
-			val = m.group(2) + m.group(3)
-			records.append((m.group(1), "TXT", val, "Recommended. Provides a way for recipients to verify that this machine sent @%s mail." % domain))
+	with open(opendkim_record_file) as orf:
+		m = re.match(r'(\S+)\s+IN\s+TXT\s+\( "([^"]+)"\s+"([^"]+)"\s*\)', orf.read(), re.S)
+		val = m.group(2) + m.group(3)
+		records.append((m.group(1), "TXT", val, "Recommended. Provides a way for recipients to verify that this machine sent @%s mail." % domain))
 
-		# Append a DMARC record.
-		records.append(("_dmarc", "TXT", 'v=DMARC1; p=quarantine', "Optional. Specifies that mail that does not originate from the box but claims to be from @%s is suspect and should be quarantined by the recipient's mail system." % domain))
+	# Append a DMARC record.
+	records.append(("_dmarc", "TXT", 'v=DMARC1; p=quarantine', "Optional. Specifies that mail that does not originate from the box but claims to be from @%s is suspect and should be quarantined by the recipient's mail system." % domain))
+
+	# For any subdomain with an A record but no SPF or DMARC record, add strict policy records.
+	all_resolvable_qnames = set(r[0] for r in records if r[1] in ("A", "AAAA"))
+	for qname in all_resolvable_qnames:
+		if not has_rec(qname, "TXT", prefix="v=spf1 "):
+			records.append((qname,  "TXT", 'v=spf1 a mx -all', "Prevents unauthorized use of this domain name for outbound mail by requiring outbound mail to originate from the indicated host(s)."))
+		dmarc_qname = "_dmarc" + ("" if qname is None else "." + qname)
+		if not has_rec(dmarc_qname, "TXT", prefix="v=DMARC1; "):
+			records.append((dmarc_qname, "TXT", 'v=DMARC1; p=reject', "Prevents unauthorized use of this domain name for outbound mail by requiring a valid DKIM signature."))
+		
 
 	# Sort the records. The None records *must* go first in the nsd zone file. Otherwise it doesn't matter.
 	records.sort(key = lambda rec : list(reversed(rec[0].split(".")) if rec[0] is not None else ""))
@@ -230,14 +254,17 @@ def build_zone(domain, all_domains, additional_records, env, is_zone=True):
 def get_custom_records(domain, additional_records, env):
 	for qname, value in additional_records.items():
 		# Is this record for the domain or one of its subdomains?
-		if qname != domain and not qname.endswith("." + domain): continue
+		# If `domain` is None, return records for all domains.
+		if domain is not None and qname != domain and not qname.endswith("." + domain): continue
 
 		# Turn the fully qualified domain name in the YAML file into
-		# our short form (None => domain, or a relative QNAME).
-		if qname == domain:
-			qname = None
-		else:
-			qname = qname[0:len(qname)-len("." + domain)]
+		# our short form (None => domain, or a relative QNAME) if
+		# domain is not None.
+		if domain is not None:
+			if qname == domain:
+				qname = None
+			else:
+				qname = qname[0:len(qname)-len("." + domain)]
 
 		# Short form. Mapping a domain name to a string is short-hand
 		# for creating A records.
@@ -308,9 +335,11 @@ def build_sshfp_records():
 	}
 
 	# Get our local fingerprints by running ssh-keyscan. The output looks
-	# like the known_hosts file: hostname, keytype, fingerprint.
+	# like the known_hosts file: hostname, keytype, fingerprint. The order
+	# of the output is arbitrary, so sort it to prevent spurrious updates
+	# to the zone file (that trigger bumping the serial number).
 	keys = shell("check_output", ["ssh-keyscan", "localhost"])
-	for key in keys.split("\n"):
+	for key in sorted(keys.split("\n")):
 		if key.strip() == "" or key[0] == "#": continue
 		try:
 			host, keytype, pubkey = key.split(" ")
@@ -429,7 +458,7 @@ $TTL 1800           ; default time to live
 
 ########################################################################
 
-def write_nsd_conf(zonefiles, env):
+def write_nsd_conf(zonefiles, additional_records, env):
 	# Basic header.
 	nsdconf = """
 server:
@@ -458,6 +487,19 @@ zone:
 	zonefile: %s
 """ % (domain, zonefile)
 
+		# If a custom secondary nameserver has been set, allow zone transfers
+		# and notifies to that nameserver.
+		if additional_records.get("_secondary_nameserver"):
+			# Get the IP address of the nameserver by resolving it.
+			hostname = additional_records.get("_secondary_nameserver")
+			resolver = dns.resolver.get_default_resolver()
+			response = dns.resolver.query(hostname+'.', "A")
+			ipaddr = str(response[0])
+			nsdconf += """\tnotify: %s NOKEY
+	provide-xfr: %s NOKEY
+""" % (ipaddr, ipaddr)
+
+
 	# Check if the nsd.conf is changing. If it isn't changing,
 	# return False to flag that no change was made.
 	with open("/etc/nsd/nsd.conf") as f:
@@ -471,8 +513,22 @@ zone:
 
 ########################################################################
 
+def dnssec_choose_algo(domain, env):
+	if '.' in domain and domain.rsplit('.')[-1] in \
+		("email", "guide", "fund"):
+		# At GoDaddy, RSASHA256 is the only algorithm supported
+		# for .email and .guide.
+		# A variety of algorithms are supported for .fund. This
+		# is preferred.
+		return "RSASHA256"
+
+	# For any domain we were able to sign before, don't change the algorithm
+	# on existing users. We'll probably want to migrate to SHA256 later.
+	return "RSASHA1-NSEC3-SHA1"
+
 def sign_zone(domain, zonefile, env):
-	dnssec_keys = load_env_vars_from_file(os.path.join(env['STORAGE_ROOT'], 'dns/dnssec/keys.conf'))
+	algo = dnssec_choose_algo(domain, env)
+	dnssec_keys = load_env_vars_from_file(os.path.join(env['STORAGE_ROOT'], 'dns/dnssec/%s.conf' % algo))
 
 	# In order to use the same keys for all domains, we have to generate
 	# a new .key file with a DNSSEC record for the specific domain. We
@@ -613,7 +669,7 @@ def set_custom_dns_record(qname, rtype, value, env):
 			v = ipaddress.ip_address(value)
 			if rtype == "A" and not isinstance(v, ipaddress.IPv4Address): raise ValueError("That's an IPv6 address.")
 			if rtype == "AAAA" and not isinstance(v, ipaddress.IPv6Address): raise ValueError("That's an IPv4 address.")
-		elif rtype in ("CNAME", "TXT"):
+		elif rtype in ("CNAME", "TXT", "SRV"):
 			# anything goes
 			pass
 		else:
@@ -670,14 +726,38 @@ def set_custom_dns_record(qname, rtype, value, env):
 				config[qname][rtype] = value
 
 	# serialize & save
-	config_yaml = rtyaml.dump(config)
-	with open(os.path.join(env['STORAGE_ROOT'], 'dns/custom.yaml'), "w") as f:
-		f.write(config_yaml)
+	write_custom_dns_config(config, env)
 
 	return True
 
 ########################################################################
 
+def set_secondary_dns(hostname, env):
+	config = get_custom_dns_config(env)
+
+	if hostname in (None, ""):
+		# Clear.
+		if "_secondary_nameserver" in config:
+			del config["_secondary_nameserver"]
+	else:
+		# Validate.
+		hostname = hostname.strip().lower()
+		resolver = dns.resolver.get_default_resolver()
+		try:
+			response = dns.resolver.query(hostname, "A")
+		except (dns.resolver.NoNameservers, dns.resolver.NXDOMAIN, dns.resolver.NoAnswer):
+			raise ValueError("Could not resolve the IP address of %s." % hostname)
+
+		# Set.
+		config["_secondary_nameserver"] = hostname
+
+	# Save and apply.
+	write_custom_dns_config(config, env)
+	return do_dns_update(env)
+
+
+########################################################################
+
 def justtestingdotemail(domain, records):
 	# If the domain is a subdomain of justtesting.email, which we own,
 	# automatically populate the zone where it is set up on dns4e.com.

management/mail_log.py

@@ -0,0 +1,121 @@
+#!/usr/bin/python3
+
+import re, os.path
+import dateutil.parser
+
+import mailconfig
+import utils
+
+def scan_mail_log(logger, env):
+	collector = {
+		"other-services": set(),
+		"imap-logins": { },
+		"postgrey": { },
+		"rejected-mail": { },
+	}
+
+	collector["real_mail_addresses"] = set(mailconfig.get_mail_users(env)) | set(alias[0] for alias in mailconfig.get_mail_aliases(env))
+
+	for fn in ('/var/log/mail.log.1', '/var/log/mail.log'):
+		if not os.path.exists(fn): continue
+		with open(fn, 'rb') as log:
+			for line in log:
+				line = line.decode("utf8", errors='replace')
+				scan_mail_log_line(line.strip(), collector)
+
+	if collector["imap-logins"]:
+		logger.add_heading("Recent IMAP Logins")
+		logger.print_block("The most recent login from each remote IP adddress is show.")
+		for k in utils.sort_email_addresses(collector["imap-logins"], env):
+			for ip, date in sorted(collector["imap-logins"][k].items(), key = lambda kv : kv[1]):
+				logger.print_line(k + "\t" + str(date) + "\t" + ip)
+
+	if collector["postgrey"]:
+		logger.add_heading("Greylisted Mail")
+		logger.print_block("The following mail was greylisted, meaning the emails were temporarily rejected. Legitimate senders will try again within ten minutes.")
+		logger.print_line("recipient" + "\t" + "received" + "\t" + "sender" + "\t" + "delivered")
+		for recipient in utils.sort_email_addresses(collector["postgrey"], env):
+			for (client_address, sender), (first_date, delivered_date) in sorted(collector["postgrey"][recipient].items(), key = lambda kv : kv[1][0]):
+				logger.print_line(recipient + "\t" + str(first_date) + "\t" + sender + "\t" + (("delivered " + str(delivered_date)) if delivered_date else "no retry yet"))
+
+	if collector["rejected-mail"]:
+		logger.add_heading("Rejected Mail")
+		logger.print_block("The following incoming mail was rejected.")
+		for k in utils.sort_email_addresses(collector["rejected-mail"], env):
+			for date, sender, message in collector["rejected-mail"][k]:
+				logger.print_line(k + "\t" + str(date) + "\t" + sender + "\t" + message)
+
+	if len(collector["other-services"]) > 0:
+		logger.add_heading("Other")
+		logger.print_block("Unrecognized services in the log: " + ", ".join(collector["other-services"]))
+
+def scan_mail_log_line(line, collector):
+	m = re.match(r"(\S+ \d+ \d+:\d+:\d+) (\S+) (\S+?)(\[\d+\])?: (.*)", line)
+	if not m: return
+
+	date, system, service, pid, log = m.groups()
+	date = dateutil.parser.parse(date)
+	
+	if service == "dovecot":
+		scan_dovecot_line(date, log, collector)
+
+	elif service == "postgrey":
+		scan_postgrey_line(date, log, collector)
+
+	elif service == "postfix/smtpd":
+		scan_postfix_smtpd_line(date, log, collector)
+
+	elif service in ("postfix/qmgr", "postfix/pickup", "postfix/cleanup",
+			"postfix/scache", "spampd", "postfix/anvil", "postfix/master",
+			"opendkim", "postfix/lmtp", "postfix/tlsmgr"):
+		# nothing to look at
+		pass
+
+	else:
+		collector["other-services"].add(service)
+
+def scan_dovecot_line(date, log, collector):
+	m = re.match("imap-login: Login: user=<(.*?)>, method=PLAIN, rip=(.*?),", log)
+	if m:
+		login, ip = m.group(1), m.group(2)
+		if ip != "127.0.0.1": # local login from webmail/zpush
+			collector["imap-logins"].setdefault(login, {})[ip] = date
+
+def scan_postgrey_line(date, log, collector):
+	m = re.match("action=(greylist|pass), reason=(.*?), (?:delay=\d+, )?client_name=(.*), client_address=(.*), sender=(.*), recipient=(.*)", log)
+	if m:
+		action, reason, client_name, client_address, sender, recipient = m.groups()
+		key = (client_address, sender)
+		if action == "greylist" and reason == "new":
+			collector["postgrey"].setdefault(recipient, {})[key] = (date, None)
+		elif action == "pass" and reason == "triplet found" and key in collector["postgrey"].get(recipient, {}):
+			collector["postgrey"][recipient][key] = (collector["postgrey"][recipient][key][0], date)
+
+def scan_postfix_smtpd_line(date, log, collector):
+	m = re.match("NOQUEUE: reject: RCPT from .*?: (.*?); from=<(.*?)> to=<(.*?)>", log)
+	if m:
+		message, sender, recipient = m.groups()
+		if recipient in collector["real_mail_addresses"]:
+			# only log mail to real recipients
+
+			# skip this, is reported in the greylisting report
+			if "Recipient address rejected: Greylisted" in message:
+				return
+
+			# simplify this one
+			m = re.search(r"Client host \[(.*?)\] blocked using zen.spamhaus.org; (.*)", message)
+			if m:
+				message = "ip blocked: " + m.group(2)
+
+			# simplify this one too
+			m = re.search(r"Sender address \[.*@(.*)\] blocked using dbl.spamhaus.org; (.*)", message)
+			if m:
+				message = "domain blocked: " + m.group(2)
+
+			collector["rejected-mail"].setdefault(recipient, []).append( (date, sender, message) )
+
+
+if __name__ == "__main__":
+	from status_checks import ConsoleOutput
+	env = utils.load_environment()
+	scan_mail_log(ConsoleOutput(), env)

management/mailconfig.py

@@ -15,7 +15,7 @@ def validate_email(email, mode=None):
 	if mode == 'user':
 		# For Dovecot's benefit, only allow basic characters.
 		ATEXT = r'[\w\-]'
-	elif mode == 'alias':
+	elif mode in (None, 'alias'):
 		# For aliases, we can allow any valid email address.
 		# Based on RFC 2822 and https://github.com/SyrusAkbary/validate_email/blob/master/validate_email.py,
 		# these characters are permitted in email addresses.
@@ -27,7 +27,8 @@ def validate_email(email, mode=None):
 	DOT_ATOM_TEXT_LOCAL = ATEXT + r'+(?:\.' + ATEXT + r'+)*'
 	if mode == 'alias':
 		# For aliases, Postfix accepts '@domain.tld' format for
-		# catch-all addresses. Make the local part optional.
+		# catch-all addresses on the source side and domain aliases
+		# on the destination side. Make the local part optional.
 		DOT_ATOM_TEXT_LOCAL = '(?:' + DOT_ATOM_TEXT_LOCAL + ')?'
 
 	# as above, but we can require that the host part have at least
@@ -46,69 +47,164 @@ def open_database(env, with_connection=False):
 	else:
 		return conn, conn.cursor()
 
-def get_mail_users(env, as_json=False):
+def get_mail_users(env):
+	# Returns a flat, sorted list of all user accounts.
+	c = open_database(env)
+	c.execute('SELECT email FROM users')
+	users = [ row[0] for row in c.fetchall() ]
+	return utils.sort_email_addresses(users, env)
+
+def get_mail_users_ex(env, with_archived=False, with_slow_info=False):
+	# Returns a complex data structure of all user accounts, optionally
+	# including archived (status="inactive") accounts.
+	#
+	# [
+	#   {
+	#     domain: "domain.tld",
+	#     users: [
+	#       {
+	#         email: "name@domain.tld",
+	#         privileges: [ "priv1", "priv2", ... ],
+	#         status: "active",
+	#         aliases: [
+	#           ("alias@domain.tld", ["indirect.alias@domain.tld", ...]),
+	#           ...
+	#         ]
+	#       },
+	#       ...
+	#     ]
+	#   },
+	#   ...
+	# ]
+
+	# Pre-load all aliases.
+	aliases = get_mail_alias_map(env)
+
+	# Get users and their privileges.
+	users = []
+	active_accounts = set()
 	c = open_database(env)
 	c.execute('SELECT email, privileges FROM users')
+	for email, privileges in c.fetchall():
+		active_accounts.add(email)
 
-	# turn into a list of tuples, but sorted by domain & email address
-	users = { row[0]: row[1] for row in c.fetchall() } # make dict
-	users = [ (email, users[email]) for email in utils.sort_email_addresses(users.keys(), env) ]
+		user = {
+			"email": email,
+			"privileges": parse_privs(privileges),
+			"status": "active",
+		}
+		users.append(user)
 
-	if not as_json:
-		return [email for email, privileges in users]
-	else:
-		aliases = get_mail_alias_map(env)
-		return [
-			{
-				"email": email,
-				"privileges": parse_privs(privileges),
-				"status": "active",
-				"aliases": [
-					(alias, sorted(evaluate_mail_alias_map(alias, aliases, env)))
-					for alias in aliases.get(email.lower(), [])
-					]
-			}
-			for email, privileges in users
-			 ]
+		if with_slow_info:
+			user["aliases"] = [
+				(alias, sorted(evaluate_mail_alias_map(alias, aliases, env)))
+				for alias in aliases.get(email.lower(), [])
+				]
+			user["mailbox_size"] = utils.du(os.path.join(env['STORAGE_ROOT'], 'mail/mailboxes', *reversed(email.split("@"))))
 
-def get_archived_mail_users(env):
-	real_users = set(get_mail_users(env))
-	root = os.path.join(env['STORAGE_ROOT'], 'mail/mailboxes')
-	ret = []
-	for domain_enc in os.listdir(root):
-		for user_enc in os.listdir(os.path.join(root, domain_enc)):
-			email = utils.unsafe_domain_name(user_enc) + "@" + utils.unsafe_domain_name(domain_enc)
-			if email in real_users: continue
-			ret.append({
-				"email": email, 
-				"privileges": "",
-				"status": "inactive"
-			})
-	return ret
+	# Add in archived accounts.
+	if with_archived:
+		root = os.path.join(env['STORAGE_ROOT'], 'mail/mailboxes')
+		for domain in os.listdir(root):
+			for user in os.listdir(os.path.join(root, domain)):
+				email = user + "@" + domain
+				mbox = os.path.join(root, domain, user)
+				if email in active_accounts: continue
+				user = {
+					"email": email, 
+					"privileges": "",
+					"status": "inactive",
+					"mailbox": mbox,
+				}
+				users.append(user)
+				if with_slow_info:
+					user["mailbox_size"] = utils.du(mbox)
 
-def get_mail_aliases(env, as_json=False):
+	# Group by domain.
+	domains = { }
+	for user in users:
+		domain = get_domain(user["email"])
+		if domain not in domains:
+			domains[domain] = {
+				"domain": domain,
+				"users": []
+				}
+		domains[domain]["users"].append(user)
+
+	# Sort domains.
+	domains = [domains[domain] for domain in utils.sort_domains(domains.keys(), env)]
+
+	# Sort users within each domain first by status then lexicographically by email address.
+	for domain in domains:
+		domain["users"].sort(key = lambda user : (user["status"] != "active", user["email"]))
+
+	return domains
+
+def get_admins(env):
+	# Returns a set of users with admin privileges.
+	users = set()
+	for domain in get_mail_users_ex(env):
+		for user in domain["users"]:
+			if "admin" in user["privileges"]:
+				users.add(user["email"])
+	return users
+
+def get_mail_aliases(env):
+	# Returns a sorted list of tuples of (alias, forward-to string).
 	c = open_database(env)
 	c.execute('SELECT source, destination FROM aliases')
 	aliases = { row[0]: row[1] for row in c.fetchall() } # make dict
 
 	# put in a canonical order: sort by domain, then by email address lexicographically
-	aliases = [ (source, aliases[source]) for source in utils.sort_email_addresses(aliases.keys(), env) ] # sort
-
-	# but put automatic aliases to administrator@ last
-	aliases.sort(key = lambda x : x[1] == get_system_administrator(env))
-
-	if as_json:
-		required_aliases = get_required_aliases(env)
-		aliases = [
-			{
-				"source": alias[0],
-				"destination": [d.strip() for d in alias[1].split(",")],
-				"required": alias[0] in required_aliases or alias[0] == get_system_administrator(env),
-			}
-			for alias in aliases
-		]
+	aliases = [ (source, aliases[source]) for source in utils.sort_email_addresses(aliases.keys(), env) ]
 	return aliases
 
+def get_mail_aliases_ex(env):
+	# Returns a complex data structure of all mail aliases, similar
+	# to get_mail_users_ex.
+	#
+	# [
+	#   {
+	#     domain: "domain.tld",
+	#     alias: [
+	#       {
+	#         source: "name@domain.tld",
+	#         destination: ["target1@domain.com", "target2@domain.com", ...],
+	#         required: True|False
+	#       },
+	#       ...
+	#     ]
+	#   },
+	#   ...
+	# ]
+
+	required_aliases = get_required_aliases(env)
+	domains = {}
+	for source, destination in get_mail_aliases(env):
+		# get alias info
+		domain = get_domain(source)
+		required = ((source in required_aliases) or (source == get_system_administrator(env)))
+
+		# add to list
+		if not domain in domains:
+			domains[domain] = {
+				"domain": domain,
+				"aliases": [],
+			}
+		domains[domain]["aliases"].append({
+			"source": source,
+			"destination": [d.strip() for d in destination.split(",")],
+			"required": required,
+		})
+
+	# Sort domains.
+	domains = [domains[domain] for domain in utils.sort_domains(domains.keys(), env)]
+
+	# Sort aliases within each domain first by required-ness then lexicographically by source address.
+	for domain in domains:
+		domain["aliases"].sort(key = lambda alias : (alias["required"], alias["source"]))
+	return domains
+
 def get_mail_alias_map(env):
 	aliases = { }
 	for alias, targets in get_mail_aliases(env):
@@ -124,9 +220,10 @@ def evaluate_mail_alias_map(email, aliases,  env):
 		ret |= evaluate_mail_alias_map(alias, aliases, env)
 	return ret
 
+def get_domain(emailaddr):
+	return emailaddr.split('@', 1)[1]
+
 def get_mail_domains(env, filter_aliases=lambda alias : True):
-	def get_domain(emailaddr):
-		return emailaddr.split('@', 1)[1]
 	return set(
 		   [get_domain(addr) for addr in get_mail_users(env)]
 		 + [get_domain(source) for source, target in get_mail_aliases(env) if filter_aliases((source, target)) ]
@@ -260,19 +357,28 @@ def add_mail_alias(source, destination, env, update_if_exists=False, do_kick=Tru
 	if not validate_email(source, mode='alias'):
 		return ("Invalid incoming email address (%s)." % source, 400)
 
-	# parse comma and \n-separated destination emails & validate
+	# validate destination
 	dests = []
-	for line in destination.split("\n"):
-		for email in line.split(","):
-			email = email.strip()
-			if email == "": continue
-			if not validate_email(email, mode='alias'):
-				return ("Invalid destination email address (%s)." % email, 400)
-			dests.append(email)
+	destination = destination.strip()
+	if validate_email(destination, mode='alias'):
+		# Oostfix allows a single @domain.tld as the destination, which means
+		# the local part on the address is preserved in the rewrite.
+		dests.append(destination)
+	else:
+		# Parse comma and \n-separated destination emails & validate. In this
+		# case, the recipients must be complete email addresses.
+		for line in destination.split("\n"):
+			for email in line.split(","):
+				email = email.strip()
+				if email == "": continue
+				if not validate_email(email):
+					return ("Invalid destination email address (%s)." % email, 400)
+				dests.append(email)
 	if len(destination) == 0:
 		return ("No destination email address(es) provided.", 400)
 	destination = ",".join(dests)
 
+	# save to db
 	conn, c = open_database(env, with_connection=True)
 	try:
 		c.execute("INSERT INTO aliases (source, destination) VALUES (?, ?)", (source, destination))

management/status_checks.py

@@ -11,13 +11,17 @@ import os, os.path, re, subprocess, datetime
 import dns.reversename, dns.resolver
 import dateutil.parser, dateutil.tz
 
-from dns_update import get_dns_zones, build_tlsa_record
+from dns_update import get_dns_zones, build_tlsa_record, get_custom_dns_config
 from web_update import get_web_domains, get_domain_ssl_files
 from mailconfig import get_mail_domains, get_mail_aliases
 
 from utils import shell, sort_domains, load_env_vars_from_file
 
 def run_checks(env, output):
+	# clear bind9's DNS cache so our DNS checks are up to date
+	shell('check_call', ["/usr/sbin/rndc", "flush"])
+	
+	# perform checks
 	env["out"] = output
 	run_system_checks(env)
 	run_network_checks(env)
@@ -25,8 +29,17 @@ def run_checks(env, output):
 
 def run_system_checks(env):
 	env["out"].add_heading("System")
+	check_ssh_password(env)
+	check_software_updates(env)
+	check_system_aliases(env)
+	check_free_disk_space(env)
 
-	# Check that SSH login with password is disabled.
+def check_ssh_password(env):
+	# Check that SSH login with password is disabled. The openssh-server
+	# package may not be installed so check that before trying to access
+	# the configuration file.
+	if not os.path.exists("/etc/ssh/sshd_config"):
+		return
 	sshd = open("/etc/ssh/sshd_config").read()
 	if re.search("\nPasswordAuthentication\s+yes", sshd) \
 		or not re.search("\nPasswordAuthentication\s+no", sshd):
@@ -37,6 +50,7 @@ def run_system_checks(env):
 	else:
 		env['out'].print_ok("SSH disallows password-based login.")
 
+def check_software_updates(env):
 	# Check for any software package updates.
 	pkgs = list_apt_updates(apt_update=False)
 	if os.path.exists("/var/run/reboot-required"):
@@ -48,10 +62,25 @@ def run_system_checks(env):
 		for p in pkgs:
 			env['out'].print_line("%s (%s)" % (p["package"], p["version"]))
 
+def check_system_aliases(env):
 	# Check that the administrator alias exists since that's where all
 	# admin email is automatically directed.
 	check_alias_exists("administrator@" + env['PRIMARY_HOSTNAME'], env)
 
+def check_free_disk_space(env):
+	# Check free disk space.
+	st = os.statvfs(env['STORAGE_ROOT'])
+	bytes_total = st.f_blocks * st.f_frsize
+	bytes_free = st.f_bavail * st.f_frsize
+	disk_msg = "The disk has %s GB space remaining." % str(round(bytes_free/1024.0/1024.0/1024.0*10.0)/10.0)
+	if bytes_free > .3 * bytes_total:
+		env['out'].print_ok(disk_msg)
+	elif bytes_free > .15 * bytes_total:
+		env['out'].print_warning(disk_msg)
+	else:
+		env['out'].print_error(disk_msg)
+
+
 def run_network_checks(env):
 	# Also see setup/network-checks.sh.
 
@@ -98,7 +127,7 @@ def run_domain_checks(env):
 		env["out"].add_heading(domain)
 
 		if domain == env["PRIMARY_HOSTNAME"]:
-			check_primary_hostname_dns(domain, env)
+			check_primary_hostname_dns(domain, env, dns_domains, dns_zonefiles)
 		
 		if domain in dns_domains:
 			check_dns_zone(domain, env, dns_zonefiles)
@@ -109,9 +138,21 @@ def run_domain_checks(env):
 		if domain in web_domains:
 			check_web_domain(domain, env)
 
-def check_primary_hostname_dns(domain, env):
+		if domain in dns_domains:
+			check_dns_zone_suggestions(domain, env, dns_zonefiles)
+
+def check_primary_hostname_dns(domain, env, dns_domains, dns_zonefiles):
+	# If a DS record is set on the zone containing this domain, check DNSSEC now.
+	for zone in dns_domains:
+		if zone == domain or domain.endswith("." + zone):
+			if query_dns(zone, "DS", nxdomain=None) is not None:
+				check_dnssec(zone, env, dns_zonefiles, is_checking_primary=True)
+
 	# Check that the ns1/ns2 hostnames resolve to A records. This information probably
-	# comes from the TLD since the information is set at the registrar.
+	# comes from the TLD since the information is set at the registrar as glue records.
+	# We're probably not actually checking that here but instead checking that we, as
+	# the nameserver, are reporting the right info --- but if the glue is incorrect this
+	# will probably fail.
 	ip = query_dns("ns1." + domain, "A") + '/' + query_dns("ns2." + domain, "A")
 	if ip == env['PUBLIC_IP'] + '/' + env['PUBLIC_IP']:
 		env['out'].print_ok("Nameserver glue records are correct at registrar. [ns1/ns2.%s => %s]" % (env['PRIMARY_HOSTNAME'], env['PUBLIC_IP']))
@@ -150,9 +191,8 @@ def check_primary_hostname_dns(domain, env):
 	elif tlsa25 is None:
 		env['out'].print_error("""The DANE TLSA record for incoming mail is not set. This is optional.""")
 	else:
-		env['out'].print_error("""The DANE TLSA record for incoming mail (%s) is not correct. It is '%s' but it should be '%s'. Try running tools/dns_update to
-			regenerate the record. It may take several hours for
-                        public DNS to update after a change."""
+		env['out'].print_error("""The DANE TLSA record for incoming mail (%s) is not correct. It is '%s' but it should be '%s'.
+			It may take several hours for public DNS to update after a change."""
                         % (tlsa_qname, tlsa25, tlsa25_expected))
 
 	# Check that the hostmaster@ email address exists.
@@ -166,17 +206,38 @@ def check_alias_exists(alias, env):
 		env['out'].print_error("""You must add a mail alias for %s and direct email to you or another administrator.""" % alias)
 
 def check_dns_zone(domain, env, dns_zonefiles):
+	# If a DS record is set at the registrar, check DNSSEC first because it will affect the NS query.
+	# If it is not set, we suggest it last.
+	if query_dns(domain, "DS", nxdomain=None) is not None:
+		check_dnssec(domain, env, dns_zonefiles)
+
 	# We provide a DNS zone for the domain. It should have NS records set up
-	# at the domain name's registrar pointing to this box.
+	# at the domain name's registrar pointing to this box. The secondary DNS
+	# server may be customized. Unfortunately this may not check the domain's
+	# whois information -- we may be getting the NS records from us rather than
+	# the TLD, and so we're not actually checking the TLD. For that we'd need
+	# to do a DNS trace.
+	custom_dns = get_custom_dns_config(env)
 	existing_ns = query_dns(domain, "NS")
-	correct_ns = "ns1.BOX; ns2.BOX".replace("BOX", env['PRIMARY_HOSTNAME'])
+	correct_ns = "; ".join(sorted([
+		"ns1." + env['PRIMARY_HOSTNAME'],
+		custom_dns.get("_secondary_nameserver", "ns2." + env['PRIMARY_HOSTNAME']),
+		]))
 	if existing_ns.lower() == correct_ns.lower():
 		env['out'].print_ok("Nameservers are set correctly at registrar. [%s]" % correct_ns)
 	else:
-		env['out'].print_error("""The nameservers set on this domain are incorrect. They are currently %s. Use your domain name registar's
+		env['out'].print_error("""The nameservers set on this domain are incorrect. They are currently %s. Use your domain name registrar's
 			control panel to set the nameservers to %s."""
 				% (existing_ns, correct_ns) )
 
+def check_dns_zone_suggestions(domain, env, dns_zonefiles):
+	# Since DNSSEC is optional, if a DS record is NOT set at the registrar suggest it.
+	# (If it was set, we did the check earlier.)
+	if query_dns(domain, "DS", nxdomain=None) is None:
+		check_dnssec(domain, env, dns_zonefiles)
+
+
+def check_dnssec(domain, env, dns_zonefiles, is_checking_primary=False):
 	# See if the domain has a DS record set at the registrar. The DS record may have
 	# several forms. We have to be prepared to check for any valid record. We've
 	# pre-generated all of the valid digests --- read them in.
@@ -188,28 +249,36 @@ def check_dns_zone(domain, env, dns_zonefiles):
 
 	# Some registrars may want the public key so they can compute the digest. The DS
 	# record that we suggest using is for the KSK (and that's how the DS records were generated).
-	dnssec_keys = load_env_vars_from_file(os.path.join(env['STORAGE_ROOT'], 'dns/dnssec/keys.conf'))
+	alg_name_map = { '7': 'RSASHA1-NSEC3-SHA1', '8': 'RSASHA256' }
+	dnssec_keys = load_env_vars_from_file(os.path.join(env['STORAGE_ROOT'], 'dns/dnssec/%s.conf' % alg_name_map[ds_alg]))
 	dnsssec_pubkey = open(os.path.join(env['STORAGE_ROOT'], 'dns/dnssec/' + dnssec_keys['KSK'] + '.key')).read().split("\t")[3].split(" ")[3]
 
 	# Query public DNS for the DS record at the registrar.
 	ds = query_dns(domain, "DS", nxdomain=None)
 	ds_looks_valid = ds and len(ds.split(" ")) == 4
 	if ds_looks_valid: ds = ds.split(" ")
-	if ds_looks_valid and ds[0] == ds_keytag and ds[1] == '7' and ds[3] == digests.get(ds[2]):
-		env['out'].print_ok("DNS 'DS' record is set correctly at registrar.")
+	if ds_looks_valid and ds[0] == ds_keytag and ds[1] == ds_alg and ds[3] == digests.get(ds[2]):
+		if is_checking_primary: return
+		env['out'].print_ok("DNSSEC 'DS' record is set correctly at registrar.")
 	else:
 		if ds == None:
-			env['out'].print_error("""This domain's DNS DS record is not set. The DS record is optional. The DS record activates DNSSEC.
+			if is_checking_primary: return
+			env['out'].print_error("""This domain's DNSSEC DS record is not set. The DS record is optional. The DS record activates DNSSEC.
 				To set a DS record, you must follow the instructions provided by your domain name registrar and provide to them this information:""")
 		else:
-			env['out'].print_error("""This domain's DNS DS record is incorrect. The chain of trust is broken between the public DNS system
+			if is_checking_primary:
+				env['out'].print_error("""The DNSSEC 'DS' record for %s is incorrect. See further details below.""" % domain)
+				return
+			env['out'].print_error("""This domain's DNSSEC DS record is incorrect. The chain of trust is broken between the public DNS system
 				and this machine's DNS server. It may take several hours for public DNS to update after a change. If you did not recently
 				make a change, you must resolve this immediately by following the instructions provided by your domain name registrar and
 				provide to them this information:""")
 		env['out'].print_line("")
 		env['out'].print_line("Key Tag: " + ds_keytag + ("" if not ds_looks_valid or ds[0] == ds_keytag else " (Got '%s')" % ds[0]))
 		env['out'].print_line("Key Flags: KSK")
-		env['out'].print_line("Algorithm: 7 / RSASHA1-NSEC3-SHA1" + ("" if not ds_looks_valid or ds[1] == '7' else " (Got '%s')" % ds[1]))
+		env['out'].print_line(
+			  ("Algorithm: %s / %s" % (ds_alg, alg_name_map[ds_alg]))
+			+ ("" if not ds_looks_valid or ds[1] == ds_alg else " (Got '%s')" % ds[1]))
 			# see http://www.iana.org/assignments/dns-sec-alg-numbers/dns-sec-alg-numbers.xhtml
 		env['out'].print_line("Digest Type: 2 / SHA-256")
 			# http://www.ietf.org/assignments/ds-rr-types/ds-rr-types.xml
@@ -290,7 +359,15 @@ def check_web_domain(domain, env):
 	check_ssl_cert(domain, env)
 
 def query_dns(qname, rtype, nxdomain='[Not Set]'):
-	resolver = dns.resolver.get_default_resolver()
+	# Make the qname absolute by appending a period. Without this, dns.resolver.query
+	# will fall back a failed lookup to a second query with this machine's hostname
+	# appended. This has been causing some false-positive Spamhaus reports. The
+	# reverse DNS lookup will pass a dns.name.Name instance which is already
+	# absolute so we should not modify that.
+	if isinstance(qname, str):
+		qname += "."
+
+	# Do the query.
 	try:
 		response = dns.resolver.query(qname, rtype)
 	except (dns.resolver.NoNameservers, dns.resolver.NXDOMAIN, dns.resolver.NoAnswer):
@@ -319,9 +396,15 @@ def check_ssl_cert(domain, env):
 
 	# Check that the certificate is good.
 
-	cert_status = check_certificate(domain, ssl_certificate, ssl_key)
+	cert_status, cert_status_details = check_certificate(domain, ssl_certificate, ssl_key)
+
+	if cert_status == "OK":
+		# The certificate is ok. The details has expiry info.
+		env['out'].print_ok("SSL certificate is signed & valid. " + cert_status_details)
+
+	elif cert_status == "SELF-SIGNED":
+		# Offer instructions for purchasing a signed certificate.
 
-	if cert_status == "SELF-SIGNED":
 		fingerprint = shell('check_output', [
 			"openssl",
 			"x509",
@@ -334,32 +417,23 @@ def check_ssl_cert(domain, env):
 		if domain == env['PRIMARY_HOSTNAME']:
 			env['out'].print_error("""The SSL certificate for this domain is currently self-signed. You will get a security
 			warning when you check or send email and when visiting this domain in a web browser (for webmail or
-			static site hosting). You may choose to confirm the security exception, but check that the certificate
-			fingerprint matches the following:""")
+			static site hosting). Use the SSL Certificates page in this control panel to install a signed SSL certificate.
+			You may choose to leave the self-signed certificate in place and confirm the security exception, but check that
+			the certificate fingerprint matches the following:""")
 			env['out'].print_line("")
 			env['out'].print_line("   " + fingerprint, monospace=True)
 		else:
-			env['out'].print_error("""The SSL certificate for this domain is currently self-signed. Visitors to a website on
+			env['out'].print_warning("""The SSL certificate for this domain is currently self-signed. Visitors to a website on
 			this domain will get a security warning. If you are not serving a website on this domain, then it is
-			safe to leave the self-signed certificate in place.""")
-		env['out'].print_line("")
-		env['out'].print_line("""You can purchase a signed certificate from many places. You will need to provide this Certificate Signing Request (CSR)
-			to whoever you purchase the SSL certificate from:""")
-		env['out'].print_line("")
-		env['out'].print_line(open(ssl_csr_path).read().strip(), monospace=True)
-		env['out'].print_line("")
-		env['out'].print_line("""When you purchase an SSL certificate you will receive a certificate in PEM format and possibly a file containing intermediate certificates in PEM format.
-			If you receive intermediate certificates, use a text editor and paste your certificate on top and then the intermediate certificates
-			below it. Save the file and place it onto this machine at %s. Then run "service nginx restart".""" % ssl_certificate)
-
-	elif cert_status == "OK":
-		env['out'].print_ok("SSL certificate is signed & valid.")
+			safe to leave the self-signed certificate in place. Use the SSL Certificates page in this control panel to
+			install a signed SSL certificate.""")
 
 	else:
-		env['out'].print_error("The SSL certificate has a problem:")
-		env['out'].print_line("")
-		env['out'].print_line(cert_status)
-		env['out'].print_line("")
+		env['out'].print_error("The SSL certificate has a problem: " + cert_status)
+		if cert_status_details:
+			env['out'].print_line("")
+			env['out'].print_line(cert_status_details)
+			env['out'].print_line("")
 
 def check_certificate(domain, ssl_certificate, ssl_private_key):
 	# Use openssl verify to check the status of a certificate.
@@ -368,11 +442,18 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 	# must be found in the Subject Common Name (CN) or be one of the
 	# Subject Alternative Names. A wildcard might also appear as the CN
 	# or in the SAN list, so check for that tool.
-	cert_dump = shell('check_output', [
+	retcode, cert_dump = shell('check_output', [
 		"openssl", "x509",
 		"-in", ssl_certificate,
 		"-noout", "-text", "-nameopt", "rfc2253",
-		])
+		], trap=True)
+
+	# If the certificate is catastrophically bad, catch that now and report it.
+	# More information was probably written to stderr (which we aren't capturing),
+	# but it is probably not helpful to the user anyway.
+	if retcode != 0:
+		return ("The SSL certificate appears to be corrupted or not a PEM-formatted SSL certificate file. (%s)" % ssl_certificate, None)
+
 	cert_dump = cert_dump.split("\n")
 	certificate_names = set()
 	cert_expiration_date = None
@@ -403,8 +484,8 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 
 	wildcard_domain = re.sub("^[^\.]+", "*", domain)
 	if domain is not None and domain not in certificate_names and wildcard_domain not in certificate_names:
-		return "This certificate is for the wrong domain names. It is for %s." % \
-			", ".join(sorted(certificate_names))
+		return ("The certificate is for the wrong domain name. It is for %s."
+			% ", ".join(sorted(certificate_names)), None)
 
 	# Second, check that the certificate matches the private key. Get the modulus of the
 	# private key and of the public key in the certificate. They should match. The output
@@ -420,7 +501,7 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 			"-in", ssl_certificate,
 			"-noout", "-modulus"])
 		if private_key_modulus != cert_key_modulus:
-			return "The certificate installed at %s does not correspond to the private key at %s." % (ssl_certificate, ssl_private_key)
+			return ("The certificate installed at %s does not correspond to the private key at %s." % (ssl_certificate, ssl_private_key), None)
 
 	# Next validate that the certificate is valid. This checks whether the certificate
 	# is self-signed, that the chain of trust makes sense, that it is signed by a CA
@@ -434,7 +515,7 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 	cert = open(ssl_certificate).read()
 	m = re.match(r'(-*BEGIN CERTIFICATE-*.*?-*END CERTIFICATE-*)(.*)', cert, re.S)
 	if m == None:
-		return "The certificate file is an invalid PEM certificate."
+		return ("The certificate file is an invalid PEM certificate.", None)
 	mycert, chaincerts = m.groups()
 
 	# This command returns a non-zero exit status in most cases, so trap errors.
@@ -450,10 +531,13 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 
 	if "self signed" in verifyoutput:
 		# Certificate is self-signed.
-		return "SELF-SIGNED"
+		return ("SELF-SIGNED", None)
 	elif retcode != 0:
+		if "unable to get local issuer certificate" in verifyoutput:
+			return ("The certificate is missing an intermediate chain or the intermediate chain is incorrect or incomplete. (%s)" % verifyoutput, None)
+
 		# There is some unknown problem. Return the `openssl verify` raw output.
-		return verifyoutput.strip()
+		return ("There is a problem with the SSL certificate.", verifyoutput.strip())
 	else:
 		# `openssl verify` returned a zero exit status so the cert is currently
 		# good.
@@ -461,11 +545,12 @@ def check_certificate(domain, ssl_certificate, ssl_private_key):
 		# But is it expiring soon?
 		now = datetime.datetime.now(dateutil.tz.tzlocal())
 		ndays = (cert_expiration_date-now).days
+		expiry_info = "The certificate expires in %d days on %s." % (ndays, cert_expiration_date.strftime("%x"))
 		if ndays <= 31:
-			return "This certificate expires in %d days on %s." % (ndays, cert_expiration_date.strftime("%x"))
+			return ("The certificate is expiring soon: " + expiry_info, None)
 
 		# Return the special OK code.
-		return "OK"
+		return ("OK", expiry_info)
 
 _apt_updates = None
 def list_apt_updates(apt_update=True):
@@ -518,6 +603,9 @@ class ConsoleOutput:
 	def print_error(self, message):
 		self.print_block(message, first_line="✖  ")
 
+	def print_warning(self, message):
+		self.print_block(message, first_line="?  ")
+
 	def print_block(self, message, first_line="   "):
 		print(first_line, end='')
 		message = re.sub("\n\s*", " ", message)
@@ -551,7 +639,7 @@ if __name__ == "__main__":
 		ssl_key, ssl_certificate, ssl_csr_path = get_domain_ssl_files(domain, env)
 		if not os.path.exists(ssl_certificate):
 			sys.exit(1)
-		cert_status = check_certificate(domain, ssl_certificate, ssl_key)
+		cert_status, cert_status_details = check_certificate(domain, ssl_certificate, ssl_key)
 		if cert_status != "OK":
 			sys.exit(1)
 		sys.exit(0)

management/templates/aliases.html

@@ -11,20 +11,33 @@
 
 <form class="form-horizontal" role="form" onsubmit="do_add_alias(); return false;">
   <div class="form-group">
-    <label for="addaliasEmail" class="col-sm-2 control-label">Email Address</label>
-    <div class="col-sm-10">
-      <input type="text" class="form-control" id="addaliasEmail" placeholder="Incoming Email Address">
+    <div class="col-sm-offset-1 col-sm-11">
+      <div id="alias_type_buttons" class="btn-group btn-group-xs">
+        <button type="button" class="btn btn-default active" data-mode="regular">Regular</button>
+        <button type="button" class="btn btn-default" data-mode="catchall">Catch-All</button>
+        <button type="button" class="btn btn-default" data-mode="domainalias">Domain Alias</button>
+      </div>
+      <div id="alias_mode_info" class="text-info small" style="display: none; margin: .5em 0 0 0;">
+        <span class="catchall hidden">A catch-all alias captures all otherwise unmatched email to a domain. Enter just a part of an email address starting with the @-sign.</span>
+        <span class="domainalias hidden">A domain alias forwards all otherwise unmatched mail from one domain to another domain, preserving the part before the @-sign.</span>
+      </div>
     </div>
   </div>
   <div class="form-group">
-    <label for="addaliasTargets" class="col-sm-2 control-label">Forward To</label>
+    <label for="addaliasEmail" class="col-sm-1 control-label">Alias</label>
     <div class="col-sm-10">
-      <textarea class="form-control" rows="3" id="addaliasTargets" placeholder="Forward to these email addresses (one per line or separated by commas)"></textarea>
+      <input type="email" class="form-control" id="addaliasEmail">
     </div>
   </div>
   <div class="form-group">
-    <div class="col-sm-offset-2 col-sm-10">
-      <button id="add-alias-button" type="submit" class="btn btn-primary">Add</button>
+    <label for="addaliasTargets" class="col-sm-1 control-label">Forward To</label>
+    <div class="col-sm-10">
+      <textarea class="form-control" rows="3" id="addaliasTargets"></textarea>
+    </div>
+  </div>
+  <div class="form-group">
+    <div class="col-sm-offset-1 col-sm-11">
+      <button id="add-alias-button" type="submit" class="btn btn-primary">Add Alias</button>
       <button id="alias-cancel" class="btn btn-default hidden" onclick="aliases_reset_form(); return false;">Cancel</button>
     </div>
   </div>
@@ -35,7 +48,7 @@
   <thead>
     <tr>
       <th></th>
-      <th>Email Address<br></th>
+      <th>Alias<br></th>
       <th>Forwards To</th>
     </tr>
   </thead>
@@ -49,7 +62,7 @@
   <table>
   <tr id="alias-template">
     <td class='actions'>
-        <a href="#" onclick="aliases_edit(this); return false;" class='edit' title="Edit Alias">
+        <a href="#" onclick="aliases_edit(this); scroll_top(); return false;" class='edit' title="Edit Alias">
           <span class="glyphicon glyphicon-pencil"></span>
         </a>
         <a href="#" onclick="aliases_remove(this); return false;" class='remove' title="Remove Alias">
@@ -73,17 +86,53 @@ function show_aliases() {
     function(r) {
       $('#alias_table tbody').html("");
       for (var i = 0; i < r.length; i++) {
-        var n = $("#alias-template").clone();
-        n.attr('id', '');
+        var hdr = $("<tr><td colspan='3'><h4/></td></tr>");
+        hdr.find('h4').text(r[i].domain);
+        $('#alias_table tbody').append(hdr);
 
-        if (r[i].required) n.addClass('alias-required');
-        n.attr('data-email', r[i].source);
-        n.find('td.email').text(r[i].source)
-        for (var j = 0; j < r[i].destination.length; j++)
-          n.find('td.target').append($("<div></div>").text(r[i].destination[j]))
-        $('#alias_table tbody').append(n);
+        for (var k = 0; k < r[i].aliases.length; k++) {
+          var alias = r[i].aliases[k];
+
+          var n = $("#alias-template").clone();
+          n.attr('id', '');
+
+          if (alias.required) n.addClass('alias-required');
+          n.attr('data-email', alias.source);
+          n.find('td.email').text(alias.source)
+          for (var j = 0; j < alias.destination.length; j++)
+            n.find('td.target').append($("<div></div>").text(alias.destination[j]))
+          $('#alias_table tbody').append(n);
+        }
       }
     })
+
+  $(function() {
+    $('#alias_type_buttons button').off('click').click(function() {
+      $('#alias_type_buttons button').removeClass('active');
+      $(this).addClass('active');
+      if ($(this).attr('data-mode') == "regular") {
+        $('#addaliasEmail').attr('type', 'email');
+        $('#addaliasEmail').attr('placeholder', 'incoming email address (e.g. you@yourdomain.com)');
+	$('#addaliasTargets').attr('placeholder', 'forward to these email addresses (one per line or separated by commas)');
+        $('#alias_mode_info').slideUp();
+      } else if ($(this).attr('data-mode') == "catchall") {
+        $('#addaliasEmail').attr('type', 'text');
+        $('#addaliasEmail').attr('placeholder', 'incoming catch-all address (e.g. @yourdomain.com)');
+	$('#addaliasTargets').attr('placeholder', 'forward to these email addresses (one per line or separated by commas)');
+        $('#alias_mode_info').slideDown();
+        $('#alias_mode_info span').addClass('hidden');
+        $('#alias_mode_info span.catchall').removeClass('hidden');
+      } else if ($(this).attr('data-mode') == "domainalias") {
+        $('#addaliasEmail').attr('type', 'text');
+        $('#addaliasEmail').attr('placeholder', 'incoming domain (@yourdomain.com)');
+        $('#addaliasTargets').attr('placeholder', 'forward to domain (@yourdomain.com)');
+        $('#alias_mode_info').slideDown();
+        $('#alias_mode_info span').addClass('hidden');
+        $('#alias_mode_info span.domainalias').removeClass('hidden');
+      }
+    })
+    $('#alias_type_buttons button[data-mode="regular"]').click(); // init
+  })
 }
 
 var is_alias_add_update = false;
@@ -116,7 +165,7 @@ function aliases_reset_form() {
   $("#addaliasEmail").val('')
   $("#addaliasTargets").val('')
   $('#alias-cancel').addClass('hidden');
-  $('#add-alias-button').text('Add');
+  $('#add-alias-button').text('Add Alias');
   is_alias_add_update = false;
 }
 
@@ -133,6 +182,12 @@ function aliases_edit(elem) {
   $("#addaliasEmail").val(email);
   $("#addaliasTargets").val(targets);
   $('#add-alias-button').text('Update');
+  if (email.charAt(0) == '@' && targets.charAt(0) == '@')
+    $('#alias_type_buttons button[data-mode="domainalias"]').click();
+  else if (email.charAt(0) == '@')
+    $('#alias_type_buttons button[data-mode="catchall"]').click();
+  else
+    $('#alias_type_buttons button[data-mode="regular"]').click();
   $('body').animate({ scrollTop: 0 })
 }
 
@@ -156,4 +211,10 @@ function aliases_remove(elem) {
         });
     });
 }
+
+function scroll_top() {
+        $('html, body').animate({
+            scrollTop: $("#panel_aliases").offset().top
+        }, 1000);
+}
 </script>

management/templates/custom-dns.html

@@ -0,0 +1,239 @@
+<style>
+#custom-dns-current td.long {
+  word-break: break-all;
+}
+</style>
+
+<h2>Custom DNS</h2>
+
+<p class="text-warning">This is an advanced configuration page.</p>
+
+<p>It is possible to set custom DNS records on domains hosted here.</p>
+
+<h3>Set Custom DNS Records</h3>
+
+<p>You can set additional DNS records, such as if you have a website running on another server, to add DKIM records for external mail providers, or for various confirmation-of-ownership tests.</p>
+
+<form class="form-horizontal" role="form" onsubmit="do_set_custom_dns(); return false;">
+  <div class="form-group">
+    <label for="customdnsQname" class="col-sm-1 control-label">Name</label>
+    <div class="col-sm-10">
+      <table style="max-width: 400px">
+      <tr><td>
+        <input type="text" class="form-control" id="customdnsQname" placeholder="subdomain">
+      </td><td style="padding: 0 1em; font-weight: bold;">.</td><td>
+        <select id="customdnsZone" class="form-control"> </select>
+      </td></tr></table>
+      <div class="text-info" style="margin-top: .5em">Leave the left field blank to set a record on the chosen domain name, or enter a subdomain.</div>
+    </div>
+  </div>
+  <div class="form-group">
+    <label for="customdnsType" class="col-sm-1 control-label">Type</label>
+    <div class="col-sm-10">
+      <select id="customdnsType" class="form-control" style="max-width: 400px" onchange="show_customdns_rtype_hint()">
+        <option value="A" data-hint="Enter an IPv4 address (i.e. a dotted quad, such as 123.456.789.012).">A (IPv4 address)</option>
+        <option value="AAAA" data-hint="Enter an IPv6 address.">AAAA (IPv6 address)</option>
+        <option value="CNAME" data-hint="Enter another domain name followed by a period at the end (e.g. mypage.github.io.).">CNAME (DNS forwarding)</option>
+        <option value="TXT" data-hint="Enter arbitrary text.">TXT (text record)</option>
+      </select>
+    </div>
+  </div>
+  <div class="form-group">
+    <label for="customdnsValue" class="col-sm-1 control-label">Value</label>
+    <div class="col-sm-10">
+      <input type="text" class="form-control" id="customdnsValue" placeholder="">
+      <div id="customdnsTypeHint" class="text-info" style="margin-top: .5em"></div>
+    </div>
+  </div>
+  <div class="form-group">
+    <div class="col-sm-offset-1 col-sm-11">
+      <button type="submit" class="btn btn-primary">Set Record</button>
+    </div>
+  </div>
+</form>
+
+<table id="custom-dns-current" class="table" style="width: auto; display: none">
+  <thead>
+    <th>Domain Name</th>
+    <th>Record Type</th>
+    <th>Value</th>
+    <th></th>
+  </thead>
+  <tbody>
+    <tr><td colspan="4">Loading...</td></tr>
+  </tbody>
+</table>
+
+<h3>Using a Secondary Nameserver</h3>
+
+<p>If your TLD requires you to have two separate nameservers, you can either set up a secondary (aka &ldquo;slave&rdquo;) nameserver or, alternatively, set up <a href="#" onclick="return show_panel('external_dns')">external DNS</a> and ignore the DNS server on this box. If you choose to use a seconday/slave nameserver, you must find a seconday/slave nameserver service provider. Your domain name registrar or virtual cloud provider may provide this service for you. Once you set up the seconday/slave nameserver service, enter the hostname of <em>their</em> secondary nameserver:</p>
+
+<form class="form-horizontal" role="form" onsubmit="do_set_secondary_dns(); return false;">
+  <div class="form-group">
+    <label for="secondarydnsHostname" class="col-sm-1 control-label">Hostname</label>
+    <div class="col-sm-10">
+      <input type="text" class="form-control" id="secondarydnsHostname" placeholder="ns1.cloudprovider.com">
+    </div>
+  </div>
+  <div class="form-group">
+    <div class="col-sm-offset-1 col-sm-11">
+      <button type="submit" class="btn btn-primary">Update</button>
+    </div>
+  </div>
+  <div id="secondarydns-clear-instructions" class="form-group" style="display: none">
+    <div class="col-sm-offset-1 col-sm-11">
+      <p class="small">Clear the input field above and click Update to use this machine itself as secondary DNS, which is the default/normal setup.</p>
+    </div>
+  </div>
+</form>
+
+
+<h3>Custom DNS API</h3>
+
+<p>Use your box&rsquo;s DNS API to set custom DNS records on domains hosted here. For instance, you can create your own dynamic DNS service.</p>
+
+<p>Send a POST request like this:</p>
+
+<pre>curl -d "" --user {email}:{password} https://{{hostname}}/admin/dns/set/<b>qname</b>[/<b>rtype</b>[/<b>value</b>]]</pre>
+
+<h4>HTTP POST parameters</h4>
+
+<table class="table">
+<thead><th>Parameter</th> <th>Value</th></thead>
+<tr><td>email</td> <td>The email address of any administrative user here.</td></tr>
+<tr><td>password</td> <td>That user&rsquo;s password.</td></tr>
+<tr><td>qname</td> <td>The fully qualified domain name for the record you are trying to set.</td></tr>
+<tr><td>rtype</td> <td>The resource type. <code>A</code> if omitted. Possible values: <code>A</code> (an IPv4 address), <code>AAAA</code> (an IPv6 address), <code>TXT</code> (a text string), or <code>CNAME</code> (an alias, which is a fully qualified domain name).</td></tr>
+<tr><td>value</td> <td>The new record&rsquo;s value. If omitted, the IPv4 address of the remote host is used. This is handy for dynamic DNS! To delete a record, use &ldquo;__delete__&rdquo;.</td></tr>
+</table>
+
+<p style="margin-top: 1em">Note that <code>-d ""</code> is merely to ensure curl sends a POST request. You do not need to put anything inside the quotes. You can also pass the value using typical form encoding in the POST body.</p>
+
+<p>Strict <a href="http://tools.ietf.org/html/rfc4408">SPF</a> and <a href="https://datatracker.ietf.org/doc/draft-kucherawy-dmarc-base/?include_text=1">DMARC</a> records will be added to all custom domains unless you override them.</p>
+
+<h4>Examples:</h4>
+
+<pre># sets laptop.mydomain.com to point to the IP address of the machine you are executing curl on
+curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/laptop.mydomain.com
+
+# sets an alias
+curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/foo.mydomain.com/cname/bar.mydomain.com
+
+# clears the alias
+curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/bar.mydomain.com/cname/__delete__
+
+# sets a TXT record using the alternate value syntax
+curl -d "value=something%20here" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/foo.mydomain.com/txt
+
+# sets a <a href="http://en.wikipedia.org/wiki/SRV_record">SRV record</a> for the "service" and "protocol" hosted on "target" server
+curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/_service._protocol.{{hostname}}/srv/"priority weight port target"
+
+# sets a SRV record using the value syntax
+curl -d "value=priority weight port target" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/_service._protocol.host/srv
+</pre>
+
+<script>
+function show_custom_dns() {
+  api(
+    "/dns/secondary-nameserver",
+    "GET",
+    { },
+    function(data) {
+      $('#secondarydnsHostname').val(data.hostname ? data.hostname : '');
+      $('#secondarydns-clear-instructions').toggle(data.hostname != null);
+    });
+
+  api(
+    "/dns/zones",
+    "GET",
+    { },
+    function(data) {
+      $('#customdnsZone').text('');
+      for (var i = 0; i < data.length; i++) {
+        $('#customdnsZone').append($('<option/>').text(data[i]));
+      }
+    });
+
+  show_current_custom_dns();
+  show_customdns_rtype_hint();
+}
+
+function show_current_custom_dns() {
+  api(
+    "/dns/set",
+    "GET",
+    { },
+    function(data) {
+      if (data.length > 0)
+        $('#custom-dns-current').fadeIn();
+      else
+        $('#custom-dns-current').fadeOut();
+
+      $('#custom-dns-current').find("tbody").text('');
+      for (var i = 0; i < data.length; i++) {
+        var tr = $("<tr/>");
+        $('#custom-dns-current').find("tbody").append(tr);
+        tr.attr('data-qname', data[i].qname);
+        tr.attr('data-rtype', data[i].rtype);
+        tr.append($('<td class="long"/>').text(data[i].qname));
+        tr.append($('<td/>').text(data[i].rtype));
+        tr.append($('<td class="long"/>').text(data[i].value));
+        tr.append($('<td>[<a href="#" onclick="return delete_custom_dns_record(this)">delete</a>]</td>'));
+      }
+    });
+}
+
+function delete_custom_dns_record(elem) {
+  var qname = $(elem).parents('tr').attr('data-qname');
+  var rtype = $(elem).parents('tr').attr('data-rtype');
+  do_set_custom_dns(qname, rtype, "__delete__");
+  return false;
+}
+
+function do_set_secondary_dns() {
+ api(
+    "/dns/secondary-nameserver",
+    "POST",
+    {
+      hostname: $('#secondarydnsHostname').val()
+    },
+    function(data) {
+      if (data == "") return; // nothing updated
+      show_modal_error("Secondary DNS", $("<pre/>").text(data));
+      $('#secondarydns-clear-instructions').slideDown();
+    },
+    function(err) {
+      show_modal_error("Secondary DNS", $("<pre/>").text(err));
+    });
+}
+
+function do_set_custom_dns(qname, rtype, value) {
+  if (!qname) {
+    if ($('#customdnsQname').val() != '')
+      qname = $('#customdnsQname').val() + '.' + $('#customdnsZone').val();
+    else
+      qname = $('#customdnsZone').val();
+    rtype = $('#customdnsType').val();
+    value = $('#customdnsValue').val();
+  }
+
+  api(
+    "/dns/set/" + qname + "/" + rtype,
+    "POST",
+    {
+      value: value
+    },
+    function(data) {
+      if (data == "") return; // nothing updated
+      show_modal_error("Custom DNS", $("<pre/>").text(data));
+      show_current_custom_dns();
+    },
+    function(err) {
+      show_modal_error("Custom DNS", $("<pre/>").text(err));
+    });
+}
+
+function show_customdns_rtype_hint() {
+  $('#customdnsTypeHint').text($("#customdnsType").find('option:selected').attr('data-hint'));
+}
+</script>

management/templates/external-dns.html

@@ -0,0 +1,78 @@
+<style>
+#external_dns_settings .heading td {
+  font-weight: bold;
+  font-size: 120%;
+  padding-top: 1.5em;
+}
+#external_dns_settings .heading.first td {
+  border-top: none;
+  padding-top: 0;
+}
+#external_dns_settings .values td {
+  border: 0;
+	padding-top: .75em;
+	padding-bottom: 0;
+}
+#external_dns_settings .value {
+	word-break: break-all;
+}
+#external_dns_settings .explanation td {
+	border: 0;
+	padding-top: .5em;
+	padding-bottom: .75em;
+	font-style: italic;
+  font-size: 95%;
+	color: #777;
+}
+</style>
+
+<h2>External DNS</h2>
+
+<p class="text-warning">This is an advanced configuration page.</p>
+
+<p>Although your box is configured to serve its own DNS, it is possible to host your DNS elsewhere &mdash; such as in the DNS control panel provided by your domain name registrar or virtual cloud provider &mdash; by copying the DNS zone information shown in the table below into your external DNS server&rsquo;s control panel.</p>
+
+<p>If you do so, you are responsible for keeping your DNS entries up to date! If you previously enabled DNSSEC on your domain name by setting a DS record at your registrar, you will likely have to turn it off before changing nameservers.</p>
+
+<table id="external_dns_settings" class="table">
+	<thead>
+		<tr>
+			<th>QName</th>
+			<th>Type</th>
+			<th>Value</th>
+		</tr>
+	</thead>
+	<tbody>
+	</tbody>
+</table>
+
+<script>
+function show_external_dns() {
+  $('#external_dns_settings tbody').html("<tr><td colspan='2' class='text-muted'>Loading...</td></tr>")
+  api(
+    "/dns/dump",
+    "GET",
+    { },
+    function(zones) {
+      $('#external_dns_settings tbody').html("");
+      for (var j = 0; j < zones.length; j++) {
+        var h = $("<tr class='heading'><td colspan='3'></td></tr>");
+        h.find("td").text(zones[j][0]);
+        $('#external_dns_settings tbody').append(h);
+
+        var r = zones[j][1];
+        for (var i = 0; i < r.length; i++) {
+          var n = $("<tr class='values'><td class='qname'/><td class='rtype'/><td class='value'/></tr>");
+          n.find('.qname').text(r[i].qname);
+          n.find('.rtype').text(r[i].rtype);
+          n.find('.value').text(r[i].value);
+          $('#external_dns_settings tbody').append(n);
+
+          var n = $("<tr class='explanation'><td colspan='3'/></tr>");
+          n.find('td').text(r[i].explanation);
+          $('#external_dns_settings tbody').append(n);
+        }
+      }
+    })
+}
+</script>

management/templates/index.html

@@ -46,20 +46,32 @@
               margin-bottom: 13px;
               margin-top: 30px;
             }
+              .panel-heading h3 {
+                border: none;
+                padding: 0;
+                margin: 0;
+              }
 
             h4 {
               font-size: 110%;
               margin-bottom: 13px;
               margin-top: 18px;
             }
+              h4:first-child {
+                margin-top: 6px;
+              }
 
-            .panel {
+            .admin_panel {
               display: none;
             }
 
             table.table {
               margin: 1.5em 0;
             }
+
+	    ol li {
+	       margin-bottom: 1em;
+	    }
         </style>
         <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/bootstrap/3.2.0/css/bootstrap-theme.min.css">
         <style>
@@ -81,26 +93,28 @@
         </div>
         <div class="navbar-collapse collapse">
           <ul class="nav navbar-nav">
-            <li class="dropdown active">
+            <li class="dropdown">
               <a href="#" class="dropdown-toggle" data-toggle="dropdown">System <b class="caret"></b></a>
               <ul class="dropdown-menu">
                 <li><a href="#system_status" onclick="return show_panel(this);">Status Checks</a></li>
+                <li><a href="#ssl" onclick="return show_panel(this);">SSL Certificates</a></li>
                 <li><a href="#system_backup" onclick="return show_panel(this);">Backup Status</a></li>
                 <li class="divider"></li>
-                <li class="dropdown-header">Super Advanced Options</li>
-                <li><a href="#system_dns" onclick="return show_panel(this);">DNS (Custom/External)</a></li>
+                <li class="dropdown-header">Advanced Options</li>
+                <li><a href="#custom_dns" onclick="return show_panel(this);">Custom DNS</a></li>
+                <li><a href="#external_dns" onclick="return show_panel(this);">External DNS</a></li>
               </ul>
             </li>
-            <li class="dropdown active">
-              <a href="#" class="dropdown-toggle" data-toggle="dropdown">Mail/Sync <b class="caret"></b></a>
+            <li class="dropdown">
+              <a href="#" class="dropdown-toggle" data-toggle="dropdown">Mail <b class="caret"></b></a>
               <ul class="dropdown-menu">
-                <li><a href="#mail-guide" onclick="return show_panel(this);">Mail Instructions</a></li>
-                <li><a href="#sync_guide" onclick="return show_panel(this);">Contacts/Calendar</a></li>
-                <li class="divider"></li>
+                <li><a href="#mail-guide" onclick="return show_panel(this);">Instructions</a></li>
                 <li><a href="#users" onclick="return show_panel(this);">Users</a></li>
                 <li><a href="#aliases" onclick="return show_panel(this);">Aliases</a></li>
               </ul>
             </li>
+            <li><a href="#sync_guide" onclick="return show_panel(this);">Contacts/Calendar</a></li>
+            <li><a href="#web" onclick="return show_panel(this);">Web</a></li>
           </ul>
           <ul class="nav navbar-nav navbar-right">
             <li><a href="#" onclick="do_logout(); return false;" style="color: white">Log out?</a></li>
@@ -109,39 +123,51 @@
       </div>
     </div>
 
-    <div class="container-fluid">
-      <div id="panel_system_status" class="container panel">
+    <div class="container">
+      <div id="panel_system_status" class="admin_panel">
       {% include "system-status.html" %}
       </div>
 
-      <div id="panel_system_backup" class="container panel">
+      <div id="panel_system_backup" class="admin_panel">
       {% include "system-backup.html" %}
       </div>
 
-      <div id="panel_system_dns" class="container panel">
-      {% include "system-dns.html" %}
+      <div id="panel_external_dns" class="admin_panel">
+      {% include "external-dns.html" %}
       </div>
 
-      <div id="panel_login" class="panel">
+      <div id="panel_custom_dns" class="admin_panel">
+      {% include "custom-dns.html" %}
+      </div>
+
+      <div id="panel_login" class="admin_panel">
       {% include "login.html" %}
       </div>
 
-      <div id="panel_mail-guide" class="container panel">
+      <div id="panel_mail-guide" class="admin_panel">
       {% include "mail-guide.html" %}
       </div>
 
-      <div id="panel_users" class="container panel">
+      <div id="panel_users" class="admin_panel">
       {% include "users.html" %}
       </div>
 
-      <div id="panel_aliases" class="container panel">
+      <div id="panel_aliases" class="admin_panel">
       {% include "aliases.html" %}
       </div>
 
-      <div id="panel_sync_guide" class="container panel">
+      <div id="panel_sync_guide" class="admin_panel">
       {% include "sync-guide.html" %}
       </div>
 
+      <div id="panel_web" class="admin_panel">
+      {% include "web.html" %}
+      </div>
+
+      <div id="panel_ssl" class="admin_panel">
+      {% include "ssl.html" %}
+      </div>
+
       <hr>
 
       <footer>
@@ -238,12 +264,13 @@ function show_modal_confirm(title, question, verb, yes_callback, cancel_callback
   $('#global_modal').modal({});
 }
 
-var is_ajax_loading = false;
+var ajax_num_executing_requests = 0;
 function ajax(options) {
-  setTimeout("if (is_ajax_loading) $('#ajax_loading_indicator').fadeIn()", 100);
+  setTimeout("if (ajax_num_executing_requests > 0) $('#ajax_loading_indicator').fadeIn()", 100);
   function hide_loading_indicator() {
-    is_ajax_loading = false;
-    $('#ajax_loading_indicator').hide();
+    ajax_num_executing_requests--;
+    if (ajax_num_executing_requests == 0)
+      $('#ajax_loading_indicator').stop().hide(); // stop() prevents an ongoing fade from causing the thing to be shown again after this call
   }
   var old_success = options.success;
   var old_error = options.error;
@@ -259,9 +286,9 @@ function ajax(options) {
     if (!old_error) 
       show_modal_error("Error", "Something went wrong, sorry.")
     else
-      old_error(jqxhr.responseText);
+      old_error(jqxhr.responseText, jqxhr);
   };
-  is_ajax_loading = true;
+  ajax_num_executing_requests++;
   $.ajax(options);
 }
 
@@ -294,6 +321,11 @@ function api(url, method, data, callback, callback_error) {
     return output;
   }
 
+  function default_error(text, xhr) {
+    if (xhr.status != 403) // else handled below
+      show_modal_error("Error", "Something went wrong, sorry.")
+  }
+
   ajax({
     url: "/admin" + url,
     method: method,
@@ -307,7 +339,7 @@ function api(url, method, data, callback, callback_error) {
         'Basic ' + base64encode(api_credentials[0] + ':' + api_credentials[1]));
     },
     success: callback,
-    error: callback_error,
+    error: callback_error || default_error,
     statusCode: {
       403: function(xhr) {
         // Credentials are no longer valid. Try to login again.
@@ -326,7 +358,7 @@ function show_panel(panelid) {
     // we might be passed an HTMLElement <a>.
     panelid = panelid.getAttribute('href').substring(1);
 
-  $('.panel').hide();
+  $('.admin_panel').hide();
   $('#panel_' + panelid).show();
   if (typeof localStorage != 'undefined')
     localStorage.setItem("miab-cp-lastpanel", panelid);

management/templates/login.html

@@ -1,7 +1,7 @@
 <h1 style="margin: 1em; text-align: center">{{hostname}}</h1>
 
 {% if no_admins_exist %}
-<div class="container">
+<div class="row">
 <div class="col-md-offset-2 col-md-8">
   <p class="text-danger">There are no administrative users on this system! To make an administrative user,
   log into this machine using SSH (like when you first set it up) and run:</p>
@@ -12,27 +12,24 @@ sudo tools/mail.py user make-admin your@emailaddress.com</pre>
 </div>  
 {% endif %}
 
-<div class="row">
-  <div class="col-sm-offset-2 col-sm-8 col-md-offset-3 col-md-6 col-lg-offset-4 col-lg-4">
-    <center>
-      <p style="margin: 2em">Log in here for your Mail-in-a-Box control panel.</p>
-    </center>
+<p style="margin: 2em; text-align: center;">Log in here for your Mail-in-a-Box control panel.</p>
 
+<div style="margin: 0 auto; max-width: 32em;">
   <form class="form-horizontal" role="form" onsubmit="do_login(); return false;">
     <div class="form-group">
-      <label for="inputEmail3" class="col-sm-2 control-label">Email</label>
-      <div class="col-sm-10">
+      <label for="inputEmail3" class="col-sm-3 control-label">Email</label>
+      <div class="col-sm-9">
         <input name="email" type="email" class="form-control" id="loginEmail" placeholder="Email">
       </div>
     </div>
     <div class="form-group">
-      <label for="inputPassword3" class="col-sm-2 control-label">Password</label>
-      <div class="col-sm-10">
+      <label for="inputPassword3" class="col-sm-3 control-label">Password</label>
+      <div class="col-sm-9">
         <input name="password" type="password" class="form-control" id="loginPassword" placeholder="Password">
       </div>
     </div>
     <div class="form-group">
-      <div class="col-sm-offset-2 col-sm-10">
+      <div class="col-sm-offset-3 col-sm-9">
         <div class="checkbox">
           <label>
             <input name='remember' type="checkbox" id="loginRemember"> Remember me
@@ -41,12 +38,11 @@ sudo tools/mail.py user make-admin your@emailaddress.com</pre>
       </div>
     </div>
     <div class="form-group">
-      <div class="col-sm-offset-2 col-sm-10">
+      <div class="col-sm-offset-3 col-sm-9">
         <button type="submit" class="btn btn-default">Sign in</button>
       </div>
     </div>
   </form>
-  </div>
 </div>
 
 
@@ -99,8 +95,10 @@ function do_login() {
         }
       }
 
-      // Open the next panel the user wants to go to.
-      show_panel(!switch_back_to_panel ? 'system_status' : switch_back_to_panel)
+      // Open the next panel the user wants to go to. Do this after the XHR response
+      // is over so that we don't start a new XHR request while this one is finishing,
+      // which confuses the loading indicator.
+      setTimeout(function() { show_panel(!switch_back_to_panel ? 'system_status' : switch_back_to_panel) }, 300);
     }
   })
 }

management/templates/mail-guide.html

@@ -1,62 +1,71 @@
-<style>#panel_mail-guide table.table { width: auto; margin-left: 1.5em; }</style>
+<style>#panel_mail-guide table.table { width: auto; margin-left: .5em; }</style>
 
-<div class="container">
-	<h2>Checking and Sending Mail</h2>
-
-	<p>You can use either webmail, IMAP/SMTP, or Exchange/ActiveSync to access your mail.</p>
-
-	<hr>
+<div>
+	<h2 style="margin-bottom: 0">Checking and Sending Mail</h2>
 
 	<div class="row">
-		<div class="col-md-6">
-			<h4>How to log in</h4>
+		<div class="col-sm-7">
+			<h3>Webmail</h3>
 
-			<p>Your username and password are the same no matter how you check your mail:</p>
+			<p>Webmail lets you check your email from any web browser. Your webmail site is:</p>
+			<p style="margin-left: 2em"><strong><a href="https://{{hostname}}/mail">https://{{hostname}}/mail</a></strong></p>
+			<p>Your username is your whole email address.</p>
 
-			<table class="table" style="max-width: 30em">
-			<tr><th>Username:</th> <td>Your whole email address.</td></tr>
-			<tr><th>Password:</th> <td>Your mail password.</td></tr>
-			</table>
-		</div>
-	</div>
 
-	<div class="row">
-		<div class="col-sm-6">
-			<h4>Webmail</h4>
+			<h3>Mobile/desktop apps</h3>
 
-			<p>Your webmail site is <a href="https://{{hostname}}/mail">https://{{hostname}}/mail</a>.</p>
-		</div>
-	</div>
+				<h4>Automatic configuration</h4>
 
-	<div class="row">
-		<div class="col-sm-6">
-			<h4>IMAP/SMTP settings</h4>
+					<p>iOS and OS X only: Open <a style="font-weight: bold" href="https://{{hostname}}/mailinabox.mobileconfig">this configuration link</a> on your iOS device or on your Mac desktop to easily set up mail (IMAP/SMTP), Contacts, and Calendar. Your username is your whole email address.</p>
+	
+				<h4>Manual configuration</h4>
 
-			<p>This method is preferred on Android devices and is not available on iOS devices.</p>
+					<p>Use the following settings when you set up your email on your phone, desktop, or other device:</p>
 
-			<table class="table">
-			<thead>
-				<tr><th style="padding-bottom: 1em; border-bottom: none">Server:</th> <td colspan="2">{{hostname}}</td></tr>
-				<tr><th>Protocol</th> <th>Port</th> <th>Options</th></tr>
-			</thead>
-			<tr><th>IMAP</th> <td>993</td> <td>SSL</td></tr>
-			<tr><th>SMTP</th> <td>587</td> <td>STARTTLS</td></tr>
-			</table>
+					<table class="table">
+					<thead>
+						<tr><th>Option</th> <th>Value</th></tr>
+					</thead>
+					<tr><th>Protocol/Method</th> <td>IMAP</td></tr>
+					<tr><th>Mail server</th> <td>{{hostname}}</td>
+					<tr><th>IMAP Port</th> <td>993</td></tr>
+					<tr><th>IMAP Sercurity</th> <td>SSL</td></tr>
+					<tr><th>SMTP Port</th> <td>587</td></tr>
+					<tr><th>SMTP Security</td> <td>STARTTLS <small>(&ldquo;always&rdquo; or &ldquo;required&rdquo;, if prompted)</small></td></tr>
+					<tr><th>Username:</th> <td>Your whole email address.</td></tr>
+					<tr><th>Password:</th> <td>Your mail password.</td></tr>
+					</table>
 
-			<p>In addition to setting up your email, you&rsquo;ll also need to set up <a href="#sync_guide" onclick="return show_panel(this);">contacts and calendar synchronization</a>.</p>
+					<p>In addition to setting up your email, you&rsquo;ll also need to set up <a href="#sync_guide" onclick="return show_panel(this);">contacts and calendar synchronization</a> separately.</p>
+
+				<h4>Exchange/ActiveSync settings</h4>
+
+					<p>On iOS devices and devices on this <a href="http://z-push.org/compatibility/">compatibility list</a>, you may set up your mail as an Exchange or ActiveSync server. However, we&rsquo;ve found this to be more buggy than using IMAP. If you encounter any problems, please use the manual settings above.</p>
+
+					<table class="table">
+					<tr><th>Server</th> <td>{{hostname}}</td></tr>
+					<tr><th>Options</th> <td>Secure Connection</td></tr>
+					</table>
+
+					<p>Your device should also provide a contacts list and calendar that syncs to this box when you use this method.</p>
 		</div>
 
-		<div class="col-sm-6">
-			<h4>Exchange/ActiveSync settings</h4>
+		<div class="col-sm-5">
+		<div class="panel panel-default">
+		<div class="panel-heading">
+			<h3>Other information about mail on your box</h3>
+		</div>
+		<div class="panel-body">
+			<h4>Greylisting</h4>
+			<p>Your box using a technique called greylisting to cut down on spam. Greylisting works by delaying mail from people you haven&rsquo;t received mail from before for up to about 10 minutes. The vast majority of spam gets tricked by this. If you are waiting for an email from someone new, such as if you are registering on a new website and are waiting for an email confirmation, please give it up to 10-15 minutes to arrive.</p>
 
-			<p>On iOS devices and devices on this <a href="http://z-push.org/compatibility/">compatibility list</a>, set up your mail as an Exchange or ActiveSync server:</p>
+			<h4>+tag addresses</h4>
+			<p>Every incoming email address also receives mail for <code>+tag</code> addresses. If your email address is <code>you@yourdomain.com</code>, you can also accept mail at <code>you+anythinghere@yourdomain.com</code>. Use this as a fast way to create aliases or to segment incoming mail for your own filtering rules.</p>
 
-			<table class="table">
-			<tr><th>Server</th> <td>{{hostname}}</td></tr>
-			<tr><th>Options</th> <td>Secure Connection</td></tr>
-			</table>
-
-			<p>Your device should also provide a contacts list and calendar that syncs to this box when you use this method.</p>
+			<h4>Use only this box to send as you</h4>
+			<p>Your box sets strict email sending policies for your domain names to make it harder for spam and other fraudulent mail to claim to be you. Only this machine is authorized to send email on behalf of your domain names. If you use any other service to send email as you, it will likely get spam filtered by recipients.</p>
+		</div>
+		</div>
 		</div>
 	</div>
 </div>

management/templates/ssl.html

@@ -0,0 +1,120 @@
+<style>
+</style>
+
+<h2>SSL Certificates</h2>
+
+<h3>Certificate Status</h3>
+
+
+<table id="ssl_domains" class="table" style="margin-bottom: 2em; width: auto;">
+  <thead>
+    <tr>
+      <th>Domain</th>
+      <th>Certificate Status</th>
+      <th>Actions</th>
+    </tr>
+  </thead>
+  <tbody>
+  </tbody>
+</table>
+
+<p>Advanced:<br>Install a multi-domain or wildcard certificate for the <code>{{hostname}}</code> domain to have it automatically applied to any domains it is valid for.</p>
+
+<h3 id="ssl_install_header">Install SSL Certificate</h3>
+
+<p>There are many places where you can get a free or cheap SSL certificate. We recommend <a href="https://www.namecheap.com/security/ssl-certificates/domain-validation.aspx">Namecheap&rsquo;s $9 certificate</a> or <a href="https://www.startssl.com/">StartSSL&rsquo;s free express lane</a>.</p>
+
+<p>Which domain are you getting an SSL certificate for?</p>
+
+<p><select id="ssldomain" onchange="show_csr()" class="form-control" style="width: auto"></select></p>
+
+<div id="csr_info" style="display: none">
+  <p>You will need to provide the SSL certificate provider this Certificate Signing Request (CSR):</p>
+
+  <pre id="ssl_csr"></pre>
+
+  <p><small>The CSR is safe to share. It can only be used in combination with a secret key stored on this machine.</small></p>
+
+  <p>The SSL certificate provider will then provide you with an SSL certificate. They may also provide you with an intermediate chain. Paste each separately into the boxes below:</p>
+
+  <p style="margin-bottom: .5em">SSL certificate:</p>
+  <p><textarea id="ssl_paste_cert" class="form-control" style="max-width: 40em; height: 8em" placeholder="-----BEGIN CERTIFICATE-----&#xA;stuff here&#xA;-----END CERTIFICATE-----"></textarea></p>
+
+  <p style="margin-bottom: .5em">SSL intermediate chain (if provided):</p>
+  <p><textarea id="ssl_paste_chain" class="form-control" style="max-width: 40em; height: 8em" placeholder="-----BEGIN CERTIFICATE-----&#xA;stuff here&#xA;-----END CERTIFICATE-----&#xA;-----BEGIN CERTIFICATE-----&#xA;more stuff here&#xA;-----END CERTIFICATE-----"></textarea></p>
+
+  <p>After you paste in the information, click the install button.</p>
+
+  <button class="btn-primary" onclick="install_cert()">Install</button>
+</div>
+
+<script>
+function show_ssl() {
+ api(
+    "/web/domains",
+    "GET",
+    {
+    },
+    function(domains) {
+      var tb = $('#ssl_domains tbody');
+      tb.text('');
+      $('#ssldomain').html('<option value="">(select)</option>');
+
+      for (var i = 0; i < domains.length; i++) {
+        var row = $("<tr><th class='domain'><a href=''></a></th><td class='status'></td> <td class='actions'><a href='#' onclick='return ssl_install(this);' class='btn btn-xs'>Install Certificate</a></td></tr>");
+        tb.append(row);
+        row.attr('data-domain', domains[i].domain);
+        row.find('.domain a').text(domains[i].domain);
+        row.find('.domain a').attr('href', 'https://' + domains[i].domain);
+        row.addClass("text-" + domains[i].ssl_certificate[0]);
+        row.find('.status').text(domains[i].ssl_certificate[1]);
+        if (domains[i].ssl_certificate[0] == "success") {
+          row.find('.actions a').addClass('btn-default').text('Replace Certificate');
+        } else {
+          row.find('.actions a').addClass('btn-primary').text('Install Certificate');
+        }
+
+        $('#ssldomain').append($('<option>').text(domains[i].domain));
+      }
+    });
+}
+
+function ssl_install(elem) {
+  var domain = $(elem).parents('tr').attr('data-domain');
+  $('#ssldomain').val(domain);
+  $('#csr_info').slideDown();
+  $('#ssl_csr').text('Loading...');
+  show_csr();
+  $('html, body').animate({ scrollTop: $('#ssl_install_header').offset().top - $('.navbar-fixed-top').height() - 20 })
+  return false;
+}
+
+function show_csr() {
+ api(
+    "/ssl/csr/" + $('#ssldomain').val(),
+    "POST",
+    {
+    },
+    function(data) {
+      $('#ssl_csr').text(data);
+    });
+}
+
+function install_cert() {
+ api(
+    "/ssl/install",
+    "POST",
+    {
+      domain: $('#ssldomain').val(),
+      cert: $('#ssl_paste_cert').val(),
+      chain: $('#ssl_paste_chain').val()
+    },
+    function(status) {
+      if (status == "") {
+        show_modal_error("SSL Certificate Installation", "Certificate has been installed. Check that you have no connection problems to the domain.", function() { show_ssl(); $('#csr_info').slideUp(); });
+      } else {
+        show_modal_error("SSL Certificate Installation", status);
+      }
+    });
+}
+</script>

management/templates/sync-guide.html

@@ -1,4 +1,4 @@
-<div class="container">
+<div>
 	<h2>Contacts &amp; Calendar Synchronization</h2>
 
 	<p>This box can hold your contacts and calendar, just like it holds your email.</p>
@@ -13,8 +13,8 @@
 
 			<table class="table">
 			<thead><tr><th>For...</th> <th>Visit this URL</th></tr></thead>
-			<tr><td>Contacts</td> <td><a href="https://{{hostname}}/cloud/contacts">https://{{hostname}}/cloud/contacts</a></td></tr>
-			<tr><td>Calendar</td> <td><a href="https://{{hostname}}/cloud/calendar">https://{{hostname}}/cloud/calendar</a></td></tr>
+			<tr><th>Contacts</td> <td><a href="https://{{hostname}}/cloud/contacts">https://{{hostname}}/cloud/contacts</a></td></tr>
+			<tr><th>Calendar</td> <td><a href="https://{{hostname}}/cloud/calendar">https://{{hostname}}/cloud/calendar</a></td></tr>
 			</table>
 
 			<p>Log in settings are the same as with <a href="#mail-guide" onclick="return show_panel(this);">mail</a>: your
@@ -30,8 +30,9 @@
 
 			<table class="table">
 			<thead><tr><th>For...</th> <th>Use...</th></tr></thead>
-			<tr><td>Contacts</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.carddav.sync">CardDAV-Sync free beta</a> (free)</td></tr>
-			<tr><td>Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.caldav.lib">CalDAV-Sync</a> ($2.89)</td></tr>
+			<tr><td>Contacts and Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=at.bitfire.davdroid">DAVdroid</a> ($3.69; free <a href="https://f-droid.org/repository/browse/?fdfilter=dav&fdid=at.bitfire.davdroid">here</a>)</td></tr>
+			<tr><td>Only Contacts</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.carddav.sync">CardDAV-Sync free beta</a> (free)</td></tr>
+			<tr><td>Only Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.caldav.lib">CalDAV-Sync</a> ($2.89)</td></tr>
 			</table>
 
 			<p>Use the following settings:</p>

management/templates/system-backup.html

@@ -28,7 +28,7 @@
   </tbody>
 </table>
 
-<p><small>The size column in the table indicates the size of the encrpyted backup, but the total size on disk shown above includes storage for unencrpyted intermediate files.</small></p>
+<p style="margin-top: 2em"><small>The size column in the table indicates the size of the encrpyted backup, but the total size on disk shown above includes storage for unencrpyted intermediate files.</small></p>
 
 <script>
 function nice_size(bytes) {
@@ -39,7 +39,12 @@ function nice_size(bytes) {
     bytes /= 1024;
     powers.shift();
   }
-  return (Math.round(bytes*10)/10) + " " + powers[0];
+  // round to have three significant figures but at most one decimal place
+  if (bytes >= 100)
+    bytes = Math.round(bytes)
+  else
+    bytes = Math.round(bytes*10)/10;
+  return bytes + " " + powers[0];
 }
 
 function show_system_backup() {
@@ -54,6 +59,12 @@ function show_system_backup() {
 
       $('#backup-status tbody').html("");
       var total_disk_size = 0;
+
+      if (r.backups.length == 0) {
+        var tr = $('<tr><td colspan="3">No backups have been made yet.</td></tr>');
+        $('#backup-status tbody').append(tr);
+      }
+
       for (var i = 0; i < r.backups.length; i++) {
         var b = r.backups[i];
         var tr = $('<tr/>');

management/templates/system-dns.html

@@ -1,118 +0,0 @@
-<style>
-#external_dns_settings .heading td {
-  font-weight: bold;
-  font-size: 120%;
-  padding-top: 1.5em;
-}
-#external_dns_settings .heading.first td {
-  border-top: none;
-  padding-top: 0;
-}
-#external_dns_settings .values td {
-  border: 0;
-	padding-top: .75em;
-	padding-bottom: 0;
-	max-width: 50vw;
-	word-wrap: break-word;
-}
-#external_dns_settings .explanation td {
-	border: 0;
-	padding-top: .5em;
-	padding-bottom: .75em;
-	font-style: italic;
-  font-size: 95%;
-	color: #777;
-}
-</style>
-
-<h2>DNS (Advanced)</h2>
-
-<p class="text-danger">Custom and external DNS are for advanced configurations.</p>
-
-<h3>Custom DNS</h3>
-
-<p>It is possible to set custom DNS records on domains hosted here. For instance, you can create your own dynamic DNS service. To do so, you will need to call your box&rsquo;s DNS API.</p>
-
-<h4>The HTTP POST request</h4>
-
-<p>Send a POST request like this:</p>
-
-<pre>curl -d "" --user {email}:{password} https://{{hostname}}/admin/dns/set/<b>qname</b>[/<b>rtype</b>[/<b>value</b>]]</pre>
-
-<table class="table">
-<thead><th>Parameter</th> <th>Value</th></thead>
-<tr><td>email</td> <td>The email address of any administrative user here.</td></tr>
-<tr><td>password</td> <td>That user&rsquo;s password.</td></tr>
-<tr><td>qname</td> <td>The fully qualified domain name for the record you are trying to set.</td></tr>
-<tr><td>rtype</td> <td>The resource type. <code>A</code> if omitted. Possible values: <code>A</code> (an IPv4 address), <code>AAAA</code> (an IPv6 address), <code>TXT</code> (a text string), or <code>CNAME</code> (an alias, which is a fully qualified domain name).</td></tr>
-<tr><td>value</td> <td>The new record&rsquo;s value. If omitted, the IPv4 address of the remote host is used. This is handy for dynamic DNS! To delete a record, use &ldquo;__delete__&rdquo;.</td></tr>
-</table>
-
-<p style="margin-top: 1em">Note that <code>-d ""</code> is merely to ensure curl sends a POST request. You do not need to put anything inside the quotes. You can also pass the value using typical form encoding in the POST body.</p>
-
-<h4>Examples:</h4>
-
-<pre># sets laptop.mydomain.com to point to the IP address of the machine you are executing curl on
-curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/laptop.mydomain.com
-
-# sets an alias
-curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/foo.mydomain.com/cname/bar.mydomain.com
-
-# clears the alias
-curl -d "" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/bar.mydomain.com/cname/__delete__
-
-# sets a TXT record using the alternate value syntax
-curl -d "value=something%20here" --user me@mydomain.com:###### https://{{hostname}}/admin/dns/set/foo.mydomain.com/txt
-</pre>
-
-
-<h3>External DNS</h3>
-
-<p>Although your box is configured to serve its own DNS, it is possible to host your DNS elsewhere.</p>
-
-<p>If you do so, you are responsible for keeping your DNS entries up to date! If you previously enabled DNSSEC on your domain name by setting a DS record at your registrar, you will likely have to turn it off before changing nameservers.</p>
-
-<p>Enter the following DNS entries at your DNS provider:</p>
-
-<table id="external_dns_settings" class="table">
-	<thead>
-		<tr>
-			<th>QName</th>
-			<th>Type</th>
-			<th>Value</th>
-		</tr>
-	</thead>
-	<tbody>
-	</tbody>
-</table>
-
-<script>
-function show_system_dns() {
-  $('#external_dns_settings tbody').html("<tr><td colspan='2' class='text-muted'>Loading...</td></tr>")
-  api(
-    "/dns/dump",
-    "GET",
-    { },
-    function(zones) {
-      $('#external_dns_settings tbody').html("");
-      for (var j = 0; j < zones.length; j++) {
-        var h = $("<tr class='heading'><td colspan='3'></td></tr>");
-        h.find("td").text(zones[j][0]);
-        $('#external_dns_settings tbody').append(h);
-
-        var r = zones[j][1];
-        for (var i = 0; i < r.length; i++) {
-          var n = $("<tr class='values'><td class='qname'/><td class='rtype'/><td class='value'/></tr>");
-          n.find('.qname').text(r[i].qname);
-          n.find('.rtype').text(r[i].rtype);
-          n.find('.value').text(r[i].value);
-          $('#external_dns_settings tbody').append(n);
-
-          var n = $("<tr class='explanation'><td colspan='3'/></tr>");
-          n.find('td').text(r[i].explanation);
-          $('#external_dns_settings tbody').append(n);
-        }
-      }
-    })
-}
-</script>

management/templates/system-status.html

@@ -10,11 +10,14 @@
   border-top: none;
   padding-top: 0;
 }
-#system-checks .error td {
+#system-checks .status-error td {
   color: #733;
 }
-#system-checks .ok td {
-  color: #030;
+#system-checks .status-warning td {
+  color: #770;
+}
+#system-checks .status-ok td {
+  color: #040;
 }
 #system-checks div.extra {
   display: none;
@@ -52,9 +55,13 @@ function show_system_status() {
       for (var i = 0; i < r.length; i++) {
         var n = $("<tr><td class='status'/><td class='message'><p style='margin: 0'/><div class='extra'/><a class='showhide' href='#'/></tr>");
         if (i == 0) n.addClass('first')
-        n.addClass(r[i].type)
+        if (r[i].type == "heading")
+                n.addClass(r[i].type)
+        else
+                n.addClass("status-" + r[i].type)
         if (r[i].type == "ok") n.find('td.status').text("✓")
         if (r[i].type == "error") n.find('td.status').text("✖")
+        if (r[i].type == "warning") n.find('td.status').text("?")
         n.find('td.message p').text(r[i].text)
         $('#system-checks tbody').append(n);
 
@@ -76,4 +83,4 @@ function show_system_status() {
       }
     })
 }
-</script>
+</script>

management/templates/users.html

@@ -1,8 +1,8 @@
 <h2>Users</h2>
 
 <style>
-#user_table tr.account_inactive td .address { color: #888; text-decoration: line-through; }
-#user_table .aliases { margin-top: .33em; font-size: 95%; }
+#user_table tr.account_inactive td.address { color: #888; text-decoration: line-through; }
+#user_table .aliases { font-size: 90%; }
 #user_table .aliases div:before { content: "⇖ "; }
 #user_table .aliases div {  }
 #user_table .actions { margin-top: .33em; font-size: 95%; }
@@ -38,6 +38,13 @@
 
 <h3>Existing mail users</h3>
 <table id="user_table" class="table" style="width: auto">
+  <thead>
+    <tr>
+      <th width="50%">Email Address</th>
+      <th>Actions</th>
+      <th>Mailbox Size</th>
+    </tr>
+  </thead>
   <tbody>
   </tbody>
 </table>
@@ -45,10 +52,9 @@
 <div style="display: none">
   <table>
   <tr id="user-template">
-    <td class='email'>
-      <div class='address'> </div>
-
-      <div class='actions'>
+    <td class='address'>
+    </td>
+    <td class='actions'>
         <span class='privs'>
         </span>
 
@@ -65,9 +71,13 @@
         <a href="#" onclick="users_remove(this); return false;" class='if_active' title="Archive Account">
           archive account
         </a>
-
-        <div class='if_inactive' style='color: #888; font-size: 90%'>To restore account, create a new account with this email address.</div>
-      </div>
+    </td>
+    <td class='mailboxsize'>
+    </td>
+  </tr>
+  <tr id="user-extra-template">
+    <td colspan="3" style="border-top: 0; padding-top: 0">
+      <div class='if_inactive restore_info' style='color: #888; font-size: 90%'>To restore account, create a new account with this email address. Or to permanently delete the mailbox, delete the directory <tt></tt> on the machine.</div>
 
       <div class='aliases' style='display: none'> </div>
     </td>
@@ -86,39 +96,54 @@ function show_users() {
     function(r) {
       $('#user_table tbody').html("");
       for (var i = 0; i < r.length; i++) {
-        var n = $("#user-template").clone();
-        n.attr('id', '');
+        var hdr = $("<tr><td><h4/></td></tr>");
+        hdr.find('h4').text(r[i].domain);
+        $('#user_table tbody').append(hdr);
 
-        n.addClass("account_" + r[i].status);
-        n.attr('data-email', r[i].email);
-        n.find('td.email .address').text(r[i].email)
-        $('#user_table tbody').append(n);
+        for (var k = 0; k < r[i].users.length; k++) {
+          var user = r[i].users[k];
 
-        if (r[i].status == 'inactive') continue;
+          var n = $("#user-template").clone();
+          var n2 = $("#user-extra-template").clone();
+          n.attr('id', '');
+          n2.attr('id', '');
+          $('#user_table tbody').append(n);
+          $('#user_table tbody').append(n2);
 
-        var add_privs = ["admin"];
+          n.addClass("account_" + user.status);
+          n2.addClass("account_" + user.status);
 
-        for (var j = 0; j < r[i].privileges.length; j++) {
-          var p = $("<span><b><span class='name'></span></b> (<a href='#' onclick='mod_priv(this, \"remove\"); return false;' title='Remove Privilege'>remove privilege</a>) |</span>");
-          p.find('span.name').text(r[i].privileges[j]);
-          n.find('.privs').append(p);
-          if (add_privs.indexOf(r[i].privileges[j]) >= 0)
-            add_privs.splice(add_privs.indexOf(r[i].privileges[j]), 1);
-        }
+          n.attr('data-email', user.email);
+          n.find('.address').text(user.email)
+          n.find('.mailboxsize').text(nice_size(user.mailbox_size))
+          n2.find('.restore_info tt').text(user.mailbox);
 
-        for (var j = 0; j < add_privs.length; j++) {
-          var p = $("<span><a href='#' onclick='mod_priv(this, \"add\"); return false;' title='Add Privilege'>make <span class='name'></span></a> | </span>");
-          p.find('span.name').text(add_privs[j]);
-          n.find('.add-privs').append(p);
-        }
+          if (user.status == 'inactive') continue;
 
-        if (r[i].aliases && r[i].aliases.length > 0) {
-          n.find('.aliases').show();
-          for (var j = 0; j < r[i].aliases.length; j++) {
-            n.find('td.email .aliases').append($("<div/>").text(
-              r[i].aliases[j][0]
-              + (r[i].aliases[j][1].length > 0 ? " ⇐ " + r[i].aliases[j][1].join(", ") : "")
-              ))
+          var add_privs = ["admin"];
+
+          for (var j = 0; j < user.privileges.length; j++) {
+            var p = $("<span><b><span class='name'></span></b> (<a href='#' onclick='mod_priv(this, \"remove\"); return false;' title='Remove Privilege'>remove privilege</a>) |</span>");
+            p.find('span.name').text(user.privileges[j]);
+            n.find('.privs').append(p);
+            if (add_privs.indexOf(user.privileges[j]) >= 0)
+              add_privs.splice(add_privs.indexOf(user.privileges[j]), 1);
+          }
+
+          for (var j = 0; j < add_privs.length; j++) {
+            var p = $("<span><a href='#' onclick='mod_priv(this, \"add\"); return false;' title='Add Privilege'>make <span class='name'></span></a> | </span>");
+            p.find('span.name').text(add_privs[j]);
+            n.find('.add-privs').append(p);
+          }
+
+          if (user.aliases && user.aliases.length > 0) {
+            n2.find('.aliases').show();
+            for (var j = 0; j < user.aliases.length; j++) {
+              n2.find('.aliases').append($("<div/>").text(
+                user.aliases[j][0]
+                + (user.aliases[j][1].length > 0 ? " ⇐ " + user.aliases[j][1].join(", ") : "")
+                ))
+            }
           }
         }
       }

management/templates/web.html

@@ -0,0 +1,102 @@
+<style>
+</style>
+
+<h2>Static Web Hosting</h2>
+
+<p>This machine is serving a simple, static website at <a href="https://{{hostname}}">https://{{hostname}}</a> and at all domain names that you set up an email user or alias for.</p>
+
+<h3>Uploading web files</h3>
+
+<p>You can replace the default website with your own HTML pages and other static files. This control panel won&rsquo;t help you design a website, but once you have <tt>.html</tt> files you can upload it following these instructions:</p>
+
+<ol>
+<li>Ensure that any domains you are publishing a website for have no problems on the <a href="#system_status" onclick="return show_panel(this);">Status Checks</a> page.</li>
+
+<li>On your personal computer, install an SSH file transfer program such as <a href="https://filezilla-project.org/">FileZilla</a> or <a href="http://linuxcommand.org/man_pages/scp1.html">scp</a>.</li>
+
+<li>Log in to this machine with the file transfer program. The server is <strong>{{hostname}}</strong>, the protocol is SSH or SFTP, and use the <strong>SSH login credentials</strong> that you used when you originally created this machine at your cloud host provider. This is <strong>not</strong> what you use to log in either for email or this control panel. Your SSH credentials probably involves a private key file.</li>
+
+<li>Upload your <tt>.html</tt> or other files to the directory <tt>{{storage_root}}/www/default</tt> on this machine. They will appear directly and immediately on the web.</li>
+
+<li>The websites set up on this machine are listed in the table below with where to put the files for each website (if you have customized that, see next section).</li>
+
+<table id="web_domains_existing" class="table" style="margin-bottom: 2em; width: auto;">
+        <thead>
+                <tr>
+                        <th>Site</th>
+                        <th>Directory for Files</th>
+                </tr>
+        </thead>
+        <tbody>
+        </tbody>
+</table>
+
+<li>If you want to have this box host a static website on a domain that is not listed in the table, create a dummy <a href="#users" onclick="return show_panel(this);">mail user</a> or <a href="#aliases" onclick="return show_panel(this);">alias</a> on the domain first.</li>
+
+</ol>
+
+<h3>Different sites for different domains</h3>
+
+<p>Create one of the directories shown in the table below to create a space for different files for one of the websites.</p>
+
+<p>After you create one of these directories, click <button id="web_update" class="btn btn-primary" onclick="do_web_update()">Web Update</button> to restart the box&rsquo;s web server so that it sees the new website file location.</p>
+
+<table id="web_domains_custom" class="table" style="margin-bottom: 2em; width: auto;">
+        <thead>
+                <tr>
+                        <th>Site</th>
+                        <th>Create Directory</th>
+                </tr>
+        </thead>
+        <tbody>
+        </tbody>
+</table>
+
+
+<script>
+function show_web() {
+ api(
+    "/web/domains",
+    "GET",
+    {
+    },
+    function(domains) {
+	var tb = $('#web_domains_existing tbody');
+	tb.text('');
+	for (var i = 0; i < domains.length; i++) {
+		var row = $("<tr><th class='domain'><a href=''></a></th><td class='directory'><tt/></td></tr>");
+		tb.append(row);
+		row.find('.domain a').text('https://' + domains[i].domain);
+		row.find('.domain a').attr('href', 'https://' + domains[i].domain);
+		row.find('.directory tt').text(domains[i].root);
+	}
+
+	tb = $('#web_domains_custom tbody');
+	tb.text('');
+	for (var i = 0; i < domains.length; i++) {
+		if (domains[i].root != domains[i].custom_root) {
+			var row = $("<tr><th class='domain'><a href=''></a></th><td class='directory'><tt></td></tr>");
+			tb.append(row);
+			row.find('.domain a').text('https://' + domains[i].domain);
+			row.find('.domain a').attr('href', 'https://' + domains[i].domain);
+			row.find('.directory tt').text(domains[i].custom_root);
+		}
+	}
+    });
+}
+
+function do_web_update() {
+ api(
+    "/web/update",
+    "POST",
+    {
+    },
+    function(data) {
+      if (data == "")
+        data = "Nothing changed.";
+      else
+        data = $("<pre/>").text(data);
+      show_modal_error("Web Update", data, function() { show_web() });
+    });
+}
+</script>

management/utils.py

@@ -23,10 +23,6 @@ def safe_domain_name(name):
     import urllib.parse
     return urllib.parse.quote(name, safe='')
 
-def unsafe_domain_name(name_encoded):
-    import urllib.parse
-    return urllib.parse.unquote(name_encoded)
-
 def sort_domains(domain_names, env):
     # Put domain names in a nice sorted order. For web_update, PRIMARY_HOSTNAME
     # must appear first so it becomes the nginx default server.
@@ -169,3 +165,22 @@ def create_syslog_handler():
     handler = logging.handlers.SysLogHandler(address='/dev/log')
     handler.setLevel(logging.WARNING)
     return handler
+
+def du(path):
+    # Computes the size of all files in the path, like the `du` command.
+    # Based on http://stackoverflow.com/a/17936789. Takes into account
+    # soft and hard links.
+    total_size = 0
+    seen = set()
+    for dirpath, dirnames, filenames in os.walk(path):
+        for f in filenames:
+            fp = os.path.join(dirpath, f)
+            try:
+                stat = os.lstat(fp)
+            except OSError:
+                continue
+            if stat.st_ino in seen:
+                continue
+            seen.add(stat.st_ino)
+            total_size += stat.st_size
+    return total_size

management/web_update.py

@@ -2,10 +2,10 @@
 # domains for which a mail account has been set up.
 ########################################################################
 
-import os, os.path, re, rtyaml
+import os, os.path, shutil, re, rtyaml
 
 from mailconfig import get_mail_domains
-from dns_update import get_custom_dns_config
+from dns_update import get_custom_dns_config, do_dns_update
 from utils import shell, safe_domain_name, sort_domains
 
 def get_web_domains(env):
@@ -38,7 +38,7 @@ def get_web_domains(env):
 
 	return domains
 	
-def do_web_update(env):
+def do_web_update(env, ok_status="web updated\n"):
 	# Build an nginx configuration file.
 	nginx_conf = open(os.path.join(os.path.dirname(__file__), "../conf/nginx-top.conf")).read()
 
@@ -65,7 +65,7 @@ def do_web_update(env):
 	# enough and doesn't break any open connections.
 	shell('check_call', ["/usr/sbin/service", "nginx", "reload"])
 
-	return "web updated\n"
+	return ok_status
 
 def make_domain_config(domain, template, template_for_primaryhost, env):
 	# How will we configure this domain.
@@ -94,6 +94,19 @@ def make_domain_config(domain, template, template_for_primaryhost, env):
 	nginx_conf = nginx_conf.replace("$SSL_KEY", ssl_key)
 	nginx_conf = nginx_conf.replace("$SSL_CERTIFICATE", ssl_certificate)
 
+	# Because the certificate may change, we should recognize this so we
+	# can trigger an nginx update.
+	def hashfile(filepath):
+		import hashlib
+		sha1 = hashlib.sha1()
+		f = open(filepath, 'rb')
+		try:
+			sha1.update(f.read())
+		finally:
+			f.close()
+		return sha1.hexdigest()
+	nginx_conf += "# ssl files sha1: %s / %s\n" % (hashfile(ssl_key), hashfile(ssl_certificate))
+
 	# Add in any user customizations in YAML format.
 	nginx_conf_custom_fn = os.path.join(env["STORAGE_ROOT"], "www/custom.yaml")
 	if os.path.exists(nginx_conf_custom_fn):
@@ -102,6 +115,8 @@ def make_domain_config(domain, template, template_for_primaryhost, env):
 			yaml = yaml[domain]
 			for path, url in yaml.get("proxies", {}).items():
 				nginx_conf += "\tlocation %s {\n\t\tproxy_pass %s;\n\t}\n" % (path, url)
+			for path, url in yaml.get("redirects", {}).items():
+				nginx_conf += "\trewrite %s %s permanent;\n" % (path, url)
 
 	# Add in any user customizations in the includes/ folder.
 	nginx_conf_custom_include = os.path.join(env["STORAGE_ROOT"], "www", safe_domain_name(domain) + ".conf")
@@ -113,14 +128,14 @@ def make_domain_config(domain, template, template_for_primaryhost, env):
 
 	return nginx_conf
 
-def get_web_root(domain, env):
+def get_web_root(domain, env, test_exists=True):
 	# Try STORAGE_ROOT/web/domain_name if it exists, but fall back to STORAGE_ROOT/web/default.
 	for test_domain in (domain, 'default'):
 		root = os.path.join(env["STORAGE_ROOT"], "www", safe_domain_name(test_domain))
-		if os.path.exists(root): break
+		if os.path.exists(root) or not test_exists: break
 	return root
 
-def get_domain_ssl_files(domain, env):
+def get_domain_ssl_files(domain, env, allow_shared_cert=True):
 	# What SSL private key will we use? Allow the user to override this, but
 	# in many cases using the same private key for all domains would be fine.
 	# Don't allow the user to override the key for PRIMARY_HOSTNAME because
@@ -144,9 +159,9 @@ def get_domain_ssl_files(domain, env):
 		# But we can be smart and reuse the main SSL certificate if is has
 		# a Subject Alternative Name matching this domain. Don't do this if
 		# the user has uploaded a different private key for this domain.
-		if not ssl_key_is_alt:
+		if not ssl_key_is_alt and allow_shared_cert:
 			from status_checks import check_certificate
-			if check_certificate(domain, ssl_certificate_primary, None) == "OK":
+			if check_certificate(domain, ssl_certificate_primary, None)[0] == "OK":
 				ssl_certificate = ssl_certificate_primary
 
 	# Where would the CSR go? As with the SSL cert itself, the CSR must be
@@ -178,12 +193,8 @@ def ensure_ssl_certificate_exists(domain, ssl_key, ssl_certificate, csr_path, en
 	# Generate a new self-signed certificate using the same private key that we already have.
 
 	# Start with a CSR.
-	shell("check_call", [
-		"openssl", "req", "-new",
-		"-key", ssl_key,
-		"-out",  csr_path,
-		"-sha256",
-		"-subj", "/C=%s/ST=/L=/O=/CN=%s" % (env["CSR_COUNTRY"], domain)])
+	with open(csr_path, "w") as f:
+		f.write(create_csr(domain, ssl_key, env))
 
 	# And then make the certificate.
 	shell("check_call", [
@@ -193,3 +204,81 @@ def ensure_ssl_certificate_exists(domain, ssl_key, ssl_certificate, csr_path, en
 		"-signkey", ssl_key,
 		"-out", ssl_certificate])
 
+def create_csr(domain, ssl_key, env):
+	return shell("check_output", [
+                "openssl", "req", "-new",
+                "-key", ssl_key,
+                "-out",  "/dev/stdout",
+                "-sha256",
+                "-subj", "/C=%s/ST=/L=/O=/CN=%s" % (env["CSR_COUNTRY"], domain)])
+
+def install_cert(domain, ssl_cert, ssl_chain, env):
+	if domain not in get_web_domains(env):
+		return "Invalid domain name."
+
+	# Write the combined cert+chain to a temporary path and validate that it is OK.
+	# The certificate always goes above the chain.
+	import tempfile, os
+	fd, fn = tempfile.mkstemp('.pem')
+	os.write(fd, (ssl_cert + '\n' + ssl_chain).encode("ascii"))
+	os.close(fd)
+
+	# Do validation on the certificate before installing it.
+	from status_checks import check_certificate
+	ssl_key, ssl_certificate, ssl_csr_path = get_domain_ssl_files(domain, env, allow_shared_cert=False)
+	cert_status, cert_status_details = check_certificate(domain, fn, ssl_key)
+	if cert_status != "OK":
+		if cert_status == "SELF-SIGNED":
+			cert_status = "This is a self-signed certificate. I can't install that."
+		os.unlink(fn)
+		if cert_status_details is not None:
+			cert_status += " " + cert_status_details
+		return cert_status
+
+	# Copy the certificate to its expected location.
+	os.makedirs(os.path.dirname(ssl_certificate), exist_ok=True)
+	shutil.move(fn, ssl_certificate)
+
+	ret = []
+
+	# When updating the cert for PRIMARY_HOSTNAME, also update DNS because it is
+	# used in the DANE TLSA record and restart postfix and dovecot which use
+	# that certificate.
+	if domain == env['PRIMARY_HOSTNAME']:
+		ret.append( do_dns_update(env) )
+
+		shell('check_call', ["/usr/sbin/service", "postfix", "restart"])
+		shell('check_call', ["/usr/sbin/service", "dovecot", "restart"])
+		ret.append("mail services restarted")
+
+	# Kick nginx so it sees the cert.
+	ret.append( do_web_update(env, ok_status="") )
+	return "\n".join(r for r in ret if r.strip() != "")
+
+def get_web_domains_info(env):
+	def check_cert(domain):
+		from status_checks import check_certificate
+		ssl_key, ssl_certificate, ssl_csr_path = get_domain_ssl_files(domain, env)
+		if not os.path.exists(ssl_certificate):
+			return ("danger", "No Certificate Installed")
+		cert_status, cert_status_details = check_certificate(domain, ssl_certificate, ssl_key)
+		if cert_status == "OK":
+			if domain == env['PRIMARY_HOSTNAME'] or ssl_certificate != get_domain_ssl_files(env['PRIMARY_HOSTNAME'], env)[1]:
+				return ("success", "Signed & valid. " + cert_status_details)
+			else:
+				# This is an alternate domain but using the same cert as the primary domain.
+				return ("success", "Signed & valid. Using multi/wildcard certificate of %s." % env['PRIMARY_HOSTNAME'])
+		elif cert_status == "SELF-SIGNED":
+			return ("warning", "Self-signed. Get a signed certificate to stop warnings.")
+		else:
+			return ("danger", "Certificate has a problem: " + cert_status)
+
+	return [
+		{
+			"domain": domain,
+			"root": get_web_root(domain, env),
+			"custom_root": get_web_root(domain, env, test_exists=False),
+			"ssl_certificate": check_cert(domain),
+		}
+		for domain in get_web_domains(env)
+	]

setup/bootstrap.sh

@@ -7,7 +7,7 @@
 #########################################################
 
 if [ -z "$TAG" ]; then
-	TAG=v0.02
+	TAG=v0.06
 fi
 
 # Are we running as root?
@@ -16,27 +16,34 @@ if [[ $EUID -ne 0 ]]; then
 	exit
 fi
 
-# Go to root's home directory.
-cd
-
 # Clone the Mail-in-a-Box repository if it doesn't exist.
-if [ ! -d mailinabox ]; then
+if [ ! -d $HOME/mailinabox ]; then
 	echo Installing git . . .
-	apt-get -q -q install -y git
+	DEBIAN_FRONTEND=noninteractive apt-get -q -q install -y git < /dev/null
+	echo
 
-	echo Downloading Mail-in-a-Box . . .
-	git clone -b $TAG --depth 1 https://github.com/mail-in-a-box/mailinabox 2> /dev/null
-	cd mailinabox
+	echo Downloading Mail-in-a-Box $TAG. . .
+	git clone \
+		-b $TAG --depth 1 \
+		https://github.com/mail-in-a-box/mailinabox \
+		$HOME/mailinabox \
+		< /dev/null 2> /dev/null
 
-# If it does exist, update it.
-else
+	echo
+fi
+
+# Change directory to it.
+cd $HOME/mailinabox
+
+# Update it.
+if [ "$TAG" != `git describe` ]; then
 	echo Updating Mail-in-a-Box to $TAG . . .
-	cd mailinabox
-	git fetch
+	git fetch --depth 1 --force --prune origin tag $TAG
 	if ! git checkout -q $TAG; then
 		echo "Update failed. Did you modify something in `pwd`?"
 		exit
 	fi
+	echo
 fi
 
 # Start setup script.

setup/dkim.sh

@@ -1,12 +1,15 @@
-# OpenDKIM: Sign outgoing mail with DKIM
-########################################
-
-# After this, you'll still need to run dns_update.sh to get the DKIM
-# signature in the DNS zones.
+#!/bin/bash
+# OpenDKIM
+# --------
+#
+# OpenDKIM provides a service that puts a DKIM signature on outbound mail.
+#
+# The DNS configuration for DKIM is done in the management daemon.
 
 source setup/functions.sh # load our functions
+source /etc/mailinabox.conf # load global vars
 
-# Install DKIM
+# Install DKIM...
 apt_install opendkim opendkim-tools
 
 # Make sure configuration directories exist.
@@ -18,9 +21,9 @@ mkdir -p $STORAGE_ROOT/mail/dkim
 echo "127.0.0.1" > /etc/opendkim/TrustedHosts
 
 if grep -q "ExternalIgnoreList" /etc/opendkim.conf; then
-	true; # already done
+	true # already done #NODOC
 else
-	# Add various configuration options to the end.
+	# Add various configuration options to the end of `opendkim.conf`.
 	cat >> /etc/opendkim.conf << EOF;
 MinimumKeyBits          1024
 ExternalIgnoreList      refile:/etc/opendkim/TrustedHosts
@@ -32,7 +35,7 @@ RequireSafeKeys         false
 EOF
 fi
 
-# Create a new DKIM key if we don't have one already. This creates
+# Create a new DKIM key. This creates
 # mail.private and mail.txt in $STORAGE_ROOT/mail/dkim. The former
 # is the actual private key and the latter is the suggested DNS TXT
 # entry which we'll want to include in our DNS setup.
@@ -47,7 +50,7 @@ chmod go-rwx $STORAGE_ROOT/mail/dkim
 
 # Add OpenDKIM as a milter to postfix, which is how it intercepts outgoing
 # mail to perform the signing (by adding a mail header).
-# Be careful. If we add other milters later, it needs to be concatenated on the smtpd_milters line.
+# Be careful. If we add other milters later, it needs to be concatenated on the smtpd_milters line. #NODOC
 tools/editconf.py /etc/postfix/main.cf \
 	smtpd_milters=inet:127.0.0.1:8891 \
 	non_smtpd_milters=\$smtpd_milters \

setup/dns.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-# DNS: Configure a DNS server to host our own DNS
+# DNS
 # -----------------------------------------------
 
 # This script installs packages, but the DNS zone files are only
@@ -8,15 +8,16 @@
 # mail users & aliases created by the user later.
 
 source setup/functions.sh # load our functions
+source /etc/mailinabox.conf # load global vars
 
 # Install `nsd`, our DNS server software, and `ldnsutils` which helps
 # us sign zones for DNSSEC.
 
 # ...but first, we have to create the user because the 
 # current Ubuntu forgets to do so in the .deb
-# see issue #25 and https://bugs.launchpad.net/ubuntu/+source/nsd/+bug/1311886
+# (see issue #25 and https://bugs.launchpad.net/ubuntu/+source/nsd/+bug/1311886)
 if id nsd > /dev/null 2>&1; then
-	true; #echo "nsd user exists... good"; #NODOC
+	true #echo "nsd user exists... good"; #NODOC
 else
 	useradd nsd;
 fi
@@ -31,44 +32,75 @@ apt_install nsd ldnsutils openssh-client
 
 # Prepare nsd's configuration.
 
-sudo mkdir -p /var/run/nsd
+mkdir -p /var/run/nsd
 
 # Create DNSSEC signing keys.
 
 mkdir -p "$STORAGE_ROOT/dns/dnssec";
-if [ ! -f "$STORAGE_ROOT/dns/dnssec/keys.conf" ]; then
-	echo "Generating DNSSEC signing keys. This may take a few minutes..."
 
-	# Create the Key-Signing Key (KSK) (-k) which is the so-called
-	# Secure Entry Point. Use a NSEC3-compatible algorithm (best
-	# practice), and a nice and long keylength. The domain name we
-	# provide ("_domain_") doesn't matter -- we'll use the same
-	# keys for all our domains.
-	KSK=$(umask 077; cd $STORAGE_ROOT/dns/dnssec; ldns-keygen -a RSASHA1-NSEC3-SHA1 -b 2048 -k _domain_);
+# TLDs don't all support the same algorithms, so we'll generate keys using a few
+# different algorithms. RSASHA1-NSEC3-SHA1 was possibly the first widely used
+# algorithm that supported NSEC3, which is a security best practice. However TLDs
+# will probably be moving away from it to a a SHA256-based algorithm.
+#
+# Supports `RSASHA1-NSEC3-SHA1` (didn't test with `RSASHA256`):
+#
+#  * .info
+#  * .me
+#
+# Requires `RSASHA256`
+#
+#  * .email
+#  * .guide
+#
+# Supports `RSASHA256` (and defaulting to this)
+#
+#  * .fund
+
+FIRST=1 #NODOC
+for algo in RSASHA1-NSEC3-SHA1 RSASHA256; do
+if [ ! -f "$STORAGE_ROOT/dns/dnssec/$algo.conf" ]; then
+	if [ $FIRST == 1 ]; then
+		echo "Generating DNSSEC signing keys. This may take a few minutes..."
+		FIRST=0 #NODOC
+	fi
+
+	# Create the Key-Signing Key (KSK) (with `-k`) which is the so-called
+	# Secure Entry Point. The domain name we provide ("_domain_") doesn't
+	#  matter -- we'll use the same keys for all our domains.
+	#
+	# `ldns-keygen` outputs the new key's filename to stdout, which
+	# we're capturing into the `KSK` variable.
+	KSK=$(umask 077; cd $STORAGE_ROOT/dns/dnssec; ldns-keygen -a $algo -b 2048 -k _domain_);
 
 	# Now create a Zone-Signing Key (ZSK) which is expected to be
 	# rotated more often than a KSK, although we have no plans to
 	# rotate it (and doing so would be difficult to do without
-	# disturbing DNS availability.) Omit '-k' and use a shorter key.
-	ZSK=$(umask 077; cd $STORAGE_ROOT/dns/dnssec; ldns-keygen -a RSASHA1-NSEC3-SHA1 -b 1024 _domain_);
+	# disturbing DNS availability.) Omit `-k` and use a shorter key length.
+	ZSK=$(umask 077; cd $STORAGE_ROOT/dns/dnssec; ldns-keygen -a $algo -b 1024 _domain_);
 
 	# These generate two sets of files like:
 	#
-	# * `K_domain_.+007+08882.ds`: DS record to provide to domain name registrar
-	# * `K_domain_.+007+08882.key`: public key (goes into DS record & upstream DNS provider like your registrar)
+	# * `K_domain_.+007+08882.ds`: DS record normally provided to domain name registrar (but it's actually invalid with `_domain_`)
+	# * `K_domain_.+007+08882.key`: public key
 	# * `K_domain_.+007+08882.private`: private key (secret!)
 
 	# The filenames are unpredictable and encode the key generation
 	# options. So we'll store the names of the files we just generated.
 	# We might have multiple keys down the road. This will identify
 	# what keys are the current keys.
-	cat > $STORAGE_ROOT/dns/dnssec/keys.conf << EOF;
+	cat > $STORAGE_ROOT/dns/dnssec/$algo.conf << EOF;
 KSK=$KSK
 ZSK=$ZSK
 EOF
 fi
 
-# Force the dns_update script to be run every day to re-sign zones for DNSSEC.
+	# And loop to do the next algorithm...
+done
+
+# Force the dns_update script to be run every day to re-sign zones for DNSSEC
+# before they expire. When we sign zones (in `dns_update.py`) we specify a
+# 30-day validation window, so we had better re-sign before then.
 cat > /etc/cron.daily/mailinabox-dnssec << EOF;
 #!/bin/bash
 # Mail-in-a-Box

setup/mail-dovecot.sh

@@ -18,15 +18,34 @@
 source setup/functions.sh # load our functions
 source /etc/mailinabox.conf # load global vars
 
-# ### Install packages and basic setup
+# Install packages...
 
 apt_install \
 	dovecot-core dovecot-imapd dovecot-lmtpd dovecot-sqlite sqlite3 \
 	dovecot-sieve dovecot-managesieved
 
-# The dovecot-imapd and dovecot-lmtpd packages automatically enable IMAP and LMTP protocols.
+# The `dovecot-imapd` and `dovecot-lmtpd` packages automatically enable IMAP and LMTP protocols.
 
-# Set the location where we'll store user mailboxes.
+# Set basic daemon options.
+
+# The `default_process_limit` is 100, which constrains the total number
+# of active IMAP connections (at, say, 5 open connections per user that
+# would be 20 users). Set it to 250 times the number of cores this
+# machine has, so on a two-core machine that's 500 processes/100 users).
+tools/editconf.py /etc/dovecot/conf.d/10-master.conf \
+	default_process_limit=$(echo "`nproc` * 250" | bc)
+
+# The inotify `max_user_instances` default is 128, which constrains
+# the total number of watched (IMAP IDLE push) folders by open connections.
+# See http://www.dovecot.org/pipermail/dovecot/2013-March/088834.html.
+# A reboot is required for this to take effect (which we don't do as
+# as a part of setup). Test with `cat /proc/sys/fs/inotify/max_user_instances`.
+tools/editconf.py /etc/sysctl.conf \
+	fs.inotify.max_user_instances=1024
+
+# Set the location where we'll store user mailboxes. '%d' is the domain name and '%n' is the
+# username part of the user's email address. We'll ensure that no bad domains or email addresses
+# are created within the management daemon.
 tools/editconf.py /etc/dovecot/conf.d/10-mail.conf \
 	mail_location=maildir:$STORAGE_ROOT/mail/mailboxes/%d/%n \
 	mail_privileged_group=mail \
@@ -41,16 +60,18 @@ tools/editconf.py /etc/dovecot/conf.d/10-auth.conf \
 	disable_plaintext_auth=yes \
 	"auth_mechanisms=plain login"
 
-# Enable SSL, specify the location of the SSL certificate and private key files,
-# and allow only good ciphers per http://baldric.net/2013/12/07/tls-ciphers-in-postfix-and-dovecot/.
+# Enable SSL, specify the location of the SSL certificate and private key files.
+# Disable obsolete SSL protocols and allow only good ciphers per http://baldric.net/2013/12/07/tls-ciphers-in-postfix-and-dovecot/.
 tools/editconf.py /etc/dovecot/conf.d/10-ssl.conf \
 	ssl=required \
 	"ssl_cert=<$STORAGE_ROOT/ssl/ssl_certificate.pem" \
 	"ssl_key=<$STORAGE_ROOT/ssl/ssl_private_key.pem" \
+	"ssl_protocols=!SSLv3 !SSLv2" \
 	"ssl_cipher_list=TLSv1+HIGH !SSLv2 !RC4 !aNULL !eNULL !3DES @STRENGTH"
 
-# Disable in-the-clear IMAP and POP because we're paranoid (we haven't even
-# enabled POP).
+# Disable in-the-clear IMAP because there is no reason for a user to transmit
+# login credentials outside of an encrypted connection. Although we haven't
+# even installed the POP server, ensure it is disabled too.
 sed -i "s/#port = 143/port = 0/" /etc/dovecot/conf.d/10-master.conf
 sed -i "s/#port = 110/port = 0/" /etc/dovecot/conf.d/10-master.conf
 
@@ -66,7 +87,7 @@ tools/editconf.py /etc/dovecot/conf.d/20-imap.conf \
 # ### LDA (LMTP)
 
 # Enable Dovecot's LDA service with the LMTP protocol. It will listen
-# in port 10026, and Spamassassin will be configured to pass mail there.
+# on port 10026, and Spamassassin will be configured to pass mail there.
 #
 # The disabled unix socket listener is normally how Postfix and Dovecot
 # would communicate (see the Postfix setup script for the corresponding
@@ -91,30 +112,32 @@ protocol imap {
 }
 EOF
 
-# Setting a postmaster_address seems to be required or LMTP won't start.
+# Setting a `postmaster_address` is required or LMTP won't start. An alias
+# will be created automatically by our management daemon.
 tools/editconf.py /etc/dovecot/conf.d/15-lda.conf \
 	postmaster_address=postmaster@$PRIMARY_HOSTNAME
 
 # ### Sieve
 
 # Enable the Dovecot sieve plugin which let's users run scripts that process
-# mail as it comes in. We'll also set a global script that moves mail marked
-# as spam by Spamassassin into the user's Spam folder.
+# mail as it comes in.
 sed -i "s/#mail_plugins = .*/mail_plugins = \$mail_plugins sieve/" /etc/dovecot/conf.d/20-lmtp.conf
 
+# Configure sieve. We'll create a global script that moves mail marked
+# as spam by Spamassassin into the user's Spam folder.
+#
+# * `sieve_before`: The path to our global sieve which handles moving spam to the Spam folder.
+#
+# * `sieve`: The path to the user's main active script. ManageSieve will create a symbolic
+# link here to the actual sieve script. It should not be in the mailbox directory
+# (because then it might appear as a folder) and it should not be in the sieve_dir
+# (because then I suppose it might appear to the user as one of their scripts).
+# * `sieve_dir`: Directory for :personal include scripts for the include extension. This
+# is also where the ManageSieve service stores the user's scripts.
 cat > /etc/dovecot/conf.d/99-local-sieve.conf << EOF;
 plugin {
-  # The path to our global sieve which handles moving spam to the Spam folder.
   sieve_before = /etc/dovecot/sieve-spam.sieve
-
-  # The path to the user's main active script. ManageSieve will create a symbolic
-  # link here to the actual sieve script. It should not be in the mailbox directory
-  # (because then it might appear as a folder) and it should not be in the sieve_dir
-  # (because then I suppose it might appear to the user as one of their scripts).
   sieve = $STORAGE_ROOT/mail/sieve/%d/%n.sieve
-
-  # Directory for :personal include scripts for the include extension. This
-  # is also where the ManageSieve service stores the user's scripts.
   sieve_dir = $STORAGE_ROOT/mail/sieve/%d/%n
 }
 EOF
@@ -122,7 +145,7 @@ EOF
 # Copy the global sieve script into where we've told Dovecot to look for it. Then
 # compile it. Global scripts must be compiled now because Dovecot won't have
 # permission later.
-cp `pwd`/conf/sieve-spam.txt /etc/dovecot/sieve-spam.sieve
+cp conf/sieve-spam.txt /etc/dovecot/sieve-spam.sieve
 sievec /etc/dovecot/sieve-spam.sieve
 
 # PERMISSIONS

setup/mail-postfix.sh

@@ -32,13 +32,26 @@ source /etc/mailinabox.conf # load global vars
 
 # ### Install packages.
 
-apt_install postfix postgrey postfix-pcre ca-certificates
+# Install postfix's packages.
+#
+# * `postfix`: The SMTP server.
+# * `postfix-pcre`: Enables header filtering.
+# * `postgrey`: A mail policy service that soft-rejects mail the first time
+#   it is received. Spammers don't usually try agian. Legitimate mail
+#   always will.
+# * `ca-certificates`: A trust store used to squelch postfix warnings about
+#   untrusted opportunistically-encrypted connections.
+
+apt_install postfix postfix-pcre postgrey ca-certificates
 
 # ### Basic Settings
 
-# Have postfix listen on all network interfaces, set our name (the Debian default seems to be localhost),
-# and set the name of the local machine to localhost for xxx@localhost mail (but I don't think this will have any effect because
-# there is no true local mail delivery). Also set the banner (must have the hostname first, then anything).
+# Set some basic settings...
+#
+# * Have postfix listen on all network interfaces.
+# * Set our name (the Debian default seems to be "localhost" but make it our hostname).
+# * Set the name of the local machine to localhost, which means xxx@localhost is delivered locally, although we don't use it.
+# * Set the SMTP banner (which must have the hostname first, then anything).
 tools/editconf.py /etc/postfix/main.cf \
 	inet_interfaces=all \
 	myhostname=$PRIMARY_HOSTNAME\
@@ -50,7 +63,7 @@ tools/editconf.py /etc/postfix/main.cf \
 # Enable the 'submission' port 587 smtpd server and tweak its settings.
 #
 # * Require the best ciphers for incoming connections per http://baldric.net/2013/12/07/tls-ciphers-in-postfix-and-dovecot/.
-#   but without affecting opportunistic TLS on incoming mail, which will allow any cipher (it's better than none).
+#   By putting this setting here we leave opportunistic TLS on incoming mail at default cipher settings (any cipher is better than none).
 # * Give it a different name in syslog to distinguish it from the port 25 smtpd server.
 # * Add a new cleanup service specific to the submission service ('authclean')
 #   that filters out privacy-sensitive headers on mail being sent out by
@@ -69,44 +82,47 @@ cp conf/postfix_outgoing_mail_header_filters /etc/postfix/outgoing_mail_header_f
 # Enable TLS on these and all other connections (i.e. ports 25 *and* 587) and
 # require TLS before a user is allowed to authenticate. This also makes
 # opportunistic TLS available on *incoming* mail.
+# Set stronger DH parameters, which via openssl tend to default to 1024 bits
+# (see ssl.sh).
 tools/editconf.py /etc/postfix/main.cf \
 	smtpd_tls_security_level=may\
 	smtpd_tls_auth_only=yes \
 	smtpd_tls_cert_file=$STORAGE_ROOT/ssl/ssl_certificate.pem \
 	smtpd_tls_key_file=$STORAGE_ROOT/ssl/ssl_private_key.pem \
+	smtpd_tls_dh1024_param_file=$STORAGE_ROOT/ssl/dh2048.pem \
 	smtpd_tls_received_header=yes
 
 # Prevent non-authenticated users from sending mail that requires being
 # relayed elsewhere. We don't want to be an "open relay". On outbound
 # mail, require one of:
 #
-# * permit_sasl_authenticated: Authenticated users (i.e. on port 587).
-# * permit_mynetworks: Mail that originates locally.
-# * reject_unauth_destination: No one else. (Permits mail whose destination is local and rejects other mail.)
+# * `permit_sasl_authenticated`: Authenticated users (i.e. on port 587).
+# * `permit_mynetworks`: Mail that originates locally.
+# * `reject_unauth_destination`: No one else. (Permits mail whose destination is local and rejects other mail.)
 tools/editconf.py /etc/postfix/main.cf \
 	smtpd_relay_restrictions=permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
 
 
 # ### DANE
-#
+
 # When connecting to remote SMTP servers, prefer TLS and use DANE if available.
 #
-# Prefering ("opportunistic") TLS means Postfix will accept whatever SSL certificate the remote
-# end provides, if the remote end offers STARTTLS during the connection. DANE takes this a
-# step further:
+# Prefering ("opportunistic") TLS means Postfix will use TLS if the remote end
+# offers it, otherwise it will transmit the message in the clear. Postfix will
+# accept whatever SSL certificate the remote end provides. Opportunistic TLS
+# protects against passive easvesdropping (but not man-in-the-middle attacks).
+# DANE takes this a step further:
 #
 # Postfix queries DNS for the TLSA record on the destination MX host. If no TLSA records are found,
 # then opportunistic TLS is used. Otherwise the server certificate must match the TLSA records
 # or else the mail bounces. TLSA also requires DNSSEC on the MX host. Postfix doesn't do DNSSEC
 # itself but assumes the system's nameserver does and reports DNSSEC status. Thus this also
-# relies on our local bind9 server being present and smtp_dns_support_level being set to dnssec
-# to use it.
+# relies on our local bind9 server being present and `smtp_dns_support_level=dnssec`.
 #
-# The smtp_tls_CAfile is superflous, but it turns warnings in the logs about untrusted certs
-# into notices about trusted certs. Since in these cases Postfix is doing opportunistic TLS,
-# it does not care about whether the remote certificate is trusted. But, looking at the logs,
-# it's nice to be able to see that the connection was in fact encrypted for the right party.
-# The CA file is provided by the package ca-certificates.
+# The `smtp_tls_CAfile` is superflous, but it eliminates warnings in the logs about untrusted certs,
+# which we don't care about seeing because Postfix is doing opportunistic TLS anyway. Better to encrypt,
+# even if we don't know if it's to the right party, than to not encrypt at all. Instead we'll
+# now see notices about trusted certs. The CA file is provided by the package `ca-certificates`.
 tools/editconf.py /etc/postfix/main.cf \
 	smtp_tls_security_level=dane \
 	smtp_dns_support_level=dnssec \
@@ -126,25 +142,31 @@ tools/editconf.py /etc/postfix/main.cf virtual_transport=lmtp:[127.0.0.1]:10025
 
 # Who can send mail to us? Some basic filters.
 #
-# * reject_non_fqdn_sender: Reject not-nice-looking return paths.
-# * reject_unknown_sender_domain: Reject return paths with invalid domains.
-# * reject_rhsbl_sender: Reject return paths that use blacklisted domains.
-# * permit_sasl_authenticated: Authenticated users (i.e. on port 587) can skip further checks.
-# * permit_mynetworks: Mail that originates locally can skip further checks.
-# * reject_rbl_client: Reject connections from IP addresses blacklisted in zen.spamhaus.org
-# * reject_unlisted_recipient: Although Postfix will reject mail to unknown recipients, it's nicer to reject such mail ahead of greylisting rather than after.
-# * check_policy_service: Apply greylisting using postgrey.
+# * `reject_non_fqdn_sender`: Reject not-nice-looking return paths.
+# * `reject_unknown_sender_domain`: Reject return paths with invalid domains.
+# * `reject_rhsbl_sender`: Reject return paths that use blacklisted domains.
+# * `permit_sasl_authenticated`: Authenticated users (i.e. on port 587) can skip further checks.
+# * `permit_mynetworks`: Mail that originates locally can skip further checks.
+# * `reject_rbl_client`: Reject connections from IP addresses blacklisted in zen.spamhaus.org
+# * `reject_unlisted_recipient`: Although Postfix will reject mail to unknown recipients, it's nicer to reject such mail ahead of greylisting rather than after.
+# * `check_policy_service`: Apply greylisting using postgrey.
 #
-# Notes:
-# permit_dnswl_client can pass through mail from whitelisted IP addresses, which would be good to put before greylisting
-# so these IPs get mail delivered quickly. But when an IP is not listed in the permit_dnswl_client list (i.e. it is not
-# whitelisted) then postfix does a DEFER_IF_REJECT, which results in all "unknown user" sorts of messages turning into
-# "450 4.7.1 Client host rejected: Service unavailable". This is a retry code, so the mail doesn't properly bounce.
+# Notes: #NODOC
+# permit_dnswl_client can pass through mail from whitelisted IP addresses, which would be good to put before greylisting #NODOC
+# so these IPs get mail delivered quickly. But when an IP is not listed in the permit_dnswl_client list (i.e. it is not #NODOC
+# whitelisted) then postfix does a DEFER_IF_REJECT, which results in all "unknown user" sorts of messages turning into #NODOC
+# "450 4.7.1 Client host rejected: Service unavailable". This is a retry code, so the mail doesn't properly bounce. #NODOC
 tools/editconf.py /etc/postfix/main.cf \
 	smtpd_sender_restrictions="reject_non_fqdn_sender,reject_unknown_sender_domain,reject_rhsbl_sender dbl.spamhaus.org" \
 	smtpd_recipient_restrictions=permit_sasl_authenticated,permit_mynetworks,"reject_rbl_client zen.spamhaus.org",reject_unlisted_recipient,"check_policy_service inet:127.0.0.1:10023"
 
+# Postfix connects to Postgrey on the 127.0.0.1 interface specifically. Ensure that
+# Postgrey listens on the same interface (and not IPv6, for instance).
+tools/editconf.py /etc/default/postgrey \
+	POSTGREY_OPTS=\"--inet=127.0.0.1:10023\"
+
 # Increase the message size limit from 10MB to 128MB.
+# The same limit is specified in nginx.conf for mail submitted via webmail and Z-Push.
 tools/editconf.py /etc/postfix/main.cf \
 	message_size_limit=134217728
 

setup/mail-users.sh

@@ -53,7 +53,6 @@ EOF
 chmod 0600 /etc/dovecot/dovecot-sql.conf.ext # per Dovecot instructions
 
 # Have Dovecot provide an authorization service that Postfix can access & use.
-# Drew Crawford sets the auth-worker process to run as the mail user, but we don't care if it runs as root.
 cat > /etc/dovecot/conf.d/99-local-auth.conf << EOF;
 service auth {
   unix_listener /var/spool/postfix/private/auth {
@@ -93,9 +92,16 @@ query = SELECT 1 FROM users WHERE email='%s'
 EOF
 
 # SQL statement to rewrite an email address if an alias is present.
+# Aliases have precedence over users, but that's counter-intuitive for
+# catch-all aliases ("@domain.com") which should *not* catch mail users.
+# To fix this, not only query the aliases table but also the users
+# table, i.e. turn users into aliases from themselves to themselves.
+# If there is both an alias and a user for the same address either
+# might be returned by the UNION, so the whole query is wrapped in
+# another select that prioritizes the alias definition.
 cat > /etc/postfix/virtual-alias-maps.cf << EOF;
 dbpath=$db_path
-query = SELECT destination FROM aliases WHERE source='%s'
+query = SELECT destination from (SELECT destination, 0 as priority FROM aliases WHERE source='%s' UNION SELECT email as destination, 1 as priority FROM users WHERE email='%s') ORDER BY priority LIMIT 1;
 EOF
 
 # Restart Services

setup/migrate.py

@@ -60,6 +60,13 @@ def migration_5(env):
 	# The secret key for encrypting backups was world readable. Fix here.
 	os.chmod(os.path.join(env["STORAGE_ROOT"], 'backup/secret_key.txt'), 0o600)
 
+def migration_6(env):
+	# We now will generate multiple DNSSEC keys for different algorithms, since TLDs may
+	# not support them all. .email only supports RSA/SHA-256. Rename the keys.conf file
+	# to be algorithm-specific.
+	basepath = os.path.join(env["STORAGE_ROOT"], 'dns/dnssec')
+	shutil.move(os.path.join(basepath, 'keys.conf'), os.path.join(basepath, 'RSASHA1-NSEC3-SHA1.conf'))
+
 def get_current_migration():
 	ver = 0
 	while True:

setup/owncloud.sh

@@ -15,7 +15,7 @@ apt_install \
 apt-get purge -qq -y owncloud*
 
 # Install ownCloud from source of this version:
-owncloud_ver=7.0.2
+owncloud_ver=7.0.4
 
 # Check if ownCloud dir exist, and check if version matches owncloud_ver (if either doesn't - install/upgrade)
 if [ ! -d /usr/local/lib/owncloud/ ] \

setup/spamassassin.sh

@@ -1,16 +1,20 @@
+#!/bin/bash
 # Spam filtering with spamassassin via spampd
-#############################################
-
+# -------------------------------------------
+#
 # spampd sits between postfix and dovecot. It takes mail from postfix
 # over the LMTP protocol, runs spamassassin on it, and then passes the
 # message over LMTP to dovecot for local delivery.
-
+#
 # In order to move spam automatically into the Spam folder we use the dovecot sieve
-# plugin. The tools/mail.py tool creates the necessary sieve script for each mail
-# user when the mail user is created.
+# plugin.
 
+source /etc/mailinabox.conf # get global vars
 source setup/functions.sh # load our functions
 
+# Install packages and basic configuration
+# ----------------------------------------
+
 # Install packages.
 apt_install spampd razor pyzor dovecot-antispam
 
@@ -26,20 +30,47 @@ hide_output pyzor discover
 # We've already configured Dovecot to listen on this port.
 tools/editconf.py /etc/default/spampd DESTPORT=10026
 
-# Enable the Dovecot antispam plugin to detect when a message moves between folders so we can
-# pass it to sa-learn for training. (Be careful if we use multiple plugins later.)
-sudo sed -i "s/#mail_plugins = .*/mail_plugins = \$mail_plugins antispam/" /etc/dovecot/conf.d/20-imap.conf
+# Spamassassin normally wraps spam as an attachment inside a fresh
+# email with a report about the message. This also protects the user
+# from accidentally openening a message with embedded malware.
+#
+# It's nice to see what rules caused the message to be marked as spam,
+# but it's also annoying to get to the original message when it is an
+# attachment, modern mail clients are safer now and don't load remote
+# content or execute scripts, and it is probably confusing to most users.
+#
+# Tell Spamassassin not to modify the original message except for adding
+# the X-Spam-Status mail header and related headers.
+tools/editconf.py /etc/spamassassin/local.cf -s \
+	report_safe=0
 
-# When mail is moved in or out of the Dovecot Spam folder, re-train using this script
-# that sends the mail to spamassassin.
-# from http://wiki2.dovecot.org/Plugins/Antispam
-cat > /usr/bin/sa-learn-pipe.sh << EOF;
-cat<&0 >> /tmp/sendmail-msg-\$\$.txt
-/usr/bin/sa-learn \$* /tmp/sendmail-msg-\$\$.txt > /dev/null
-rm -f /tmp/sendmail-msg-\$\$.txt
-exit 0
-EOF
-chmod a+x /usr/bin/sa-learn-pipe.sh
+# Bayesean learning
+# -----------------
+#
+# Spamassassin can learn from mail marked as spam or ham, but it needs to be
+# configured. We'll store the learning data in our storage area.
+#
+# These files must be:
+#
+# * Writable by sa-learn-pipe script below, which run as the 'mail' user, for manual tagging of mail as spam/ham.
+# * Readable by the spampd process ('spampd' user) during mail filtering.
+# * Writable by the debian-spamd user, which runs /etc/cron.daily/spamassassin.
+#
+# We'll have these files owned by spampd and grant access to the other two processes.
+
+tools/editconf.py /etc/spamassassin/local.cf -s \
+	bayes_path=$STORAGE_ROOT/mail/spamassassin/bayes
+
+mkdir -p $STORAGE_ROOT/mail/spamassassin
+chown -R spampd:spampd $STORAGE_ROOT/mail/spamassassin
+
+# To mark mail as spam or ham, just drag it in or out of the Spam folder. We'll
+# use the Dovecot antispam plugin to detect the message move operation and execute
+# a shell script that invokes learning.
+
+# Enable the Dovecot antispam plugin.
+# (Be careful if we use multiple plugins later.) #NODOC
+sed -i "s/#mail_plugins = .*/mail_plugins = \$mail_plugins antispam/" /etc/dovecot/conf.d/20-imap.conf
 
 # Configure the antispam plugin to call sa-learn-pipe.sh.
 cat > /etc/dovecot/conf.d/99-local-spampd.conf << EOF;
@@ -47,12 +78,36 @@ plugin {
     antispam_backend = pipe
     antispam_spam_pattern_ignorecase = SPAM
     antispam_allow_append_to_spam = yes
-    antispam_pipe_program_spam_args = /usr/bin/sa-learn-pipe.sh;--spam
-    antispam_pipe_program_notspam_args = /usr/bin/sa-learn-pipe.sh;--ham
+    antispam_pipe_program_spam_args = /usr/local/bin/sa-learn-pipe.sh;--spam
+    antispam_pipe_program_notspam_args = /usr/local/bin/sa-learn-pipe.sh;--ham
     antispam_pipe_program = /bin/bash
 }
 EOF
 
+# Have Dovecot run its mail process with a supplementary group (the spampd group)
+# so that it can access the learning files.
+
+tools/editconf.py /etc/dovecot/conf.d/10-mail.conf \
+	mail_access_groups=spampd
+
+# Here's the script that the antispam plugin executes. It spools the message into
+# a temporary file and then runs sa-learn on it.
+# from http://wiki2.dovecot.org/Plugins/Antispam
+rm -f /usr/bin/sa-learn-pipe.sh # legacy location #NODOC
+cat > /usr/local/bin/sa-learn-pipe.sh << EOF;
+cat<&0 >> /tmp/sendmail-msg-\$\$.txt
+/usr/bin/sa-learn \$* /tmp/sendmail-msg-\$\$.txt > /dev/null
+rm -f /tmp/sendmail-msg-\$\$.txt
+exit 0
+EOF
+chmod a+x /usr/local/bin/sa-learn-pipe.sh
+
+# Create empty bayes training data (if it doesn't exist). Once the files exist,
+# ensure they are group-writable so that the Dovecot process has access.
+sudo -u spampd /usr/bin/sa-learn --sync 2>/dev/null
+chmod -R 660 $STORAGE_ROOT/mail/spamassassin
+chmod 770 $STORAGE_ROOT/mail/spamassassin
+
 # Initial training?
 # sa-learn --ham storage/mail/mailboxes/*/*/cur/
 # sa-learn --spam storage/mail/mailboxes/*/*/.Spam/cur/

setup/ssl.sh

@@ -2,7 +2,7 @@
 #
 # SSL Certificate
 # ---------------
-#
+
 # Create a self-signed SSL certificate if one has not yet been created.
 #
 # The certificate is for PRIMARY_HOSTNAME specifically and is used for:
@@ -22,24 +22,31 @@ source /etc/mailinabox.conf # load global vars
 apt_install openssl
 
 mkdir -p $STORAGE_ROOT/ssl
-# Generate a new private key if one doesn't already exist.
+# Generate a new private key.
 # Set the umask so the key file is not world-readable.
 if [ ! -f $STORAGE_ROOT/ssl/ssl_private_key.pem ]; then
 	(umask 077; hide_output \
 		openssl genrsa -out $STORAGE_ROOT/ssl/ssl_private_key.pem 2048)
 fi
 
-# Generate a certificate signing request if one doesn't already exist.
+# Generate a certificate signing request.
 if [ ! -f $STORAGE_ROOT/ssl/ssl_cert_sign_req.csr ]; then
 	hide_output \
 	openssl req -new -key $STORAGE_ROOT/ssl/ssl_private_key.pem -out $STORAGE_ROOT/ssl/ssl_cert_sign_req.csr \
 	  -sha256 -subj "/C=$CSR_COUNTRY/ST=/L=/O=/CN=$PRIMARY_HOSTNAME"
 fi
 
-# Generate a SSL certificate by self-signing if a SSL certificate doesn't yet exist.
+# Generate a SSL certificate by self-signing.
 if [ ! -f $STORAGE_ROOT/ssl/ssl_certificate.pem ]; then
 	hide_output \
 	openssl x509 -req -days 365 \
 	  -in $STORAGE_ROOT/ssl/ssl_cert_sign_req.csr -signkey $STORAGE_ROOT/ssl/ssl_private_key.pem -out $STORAGE_ROOT/ssl/ssl_certificate.pem
 fi
 
+# For nginx and postfix, pre-generate some Diffie-Hellman cipher bits which is
+# used when a Diffie-Hellman cipher is selected during TLS negotiation. Diffie-Hellman
+# provides Perfect Forward Security. openssl's default is 1024 bits, but we'll
+# create 2048.
+if [ ! -f $STORAGE_ROOT/ssl/dh2048.pem ]; then
+	openssl dhparam -out $STORAGE_ROOT/ssl/dh2048.pem 2048
+fi

setup/start.sh

@@ -6,7 +6,22 @@ source setup/functions.sh # load our functions
 
 # Check system setup: Are we running as root on Ubuntu 14.04 on a
 # machine with enough memory? If not, this shows an error and exits.
-. setup/preflight.sh
+source setup/preflight.sh
+
+# Ensure Python reads/writes files in UTF-8. If the machine
+# triggers some other locale in Python, like ASCII encoding,
+# Python may not be able to read/write files. Here and in
+# the management daemon startup script.
+
+if [ -z `locale -a | grep en_US.utf8` ]; then
+    # Generate locale if not exists
+    hide_output locale-gen en_US.UTF-8
+fi
+
+export LANGUAGE=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+export LANG=en_US.UTF-8
+export LC_TYPE=en_US.UTF-8
 
 # Recall the last settings used if we're running this a second time.
 if [ -f /etc/mailinabox.conf ]; then
@@ -33,7 +48,7 @@ chmod +x /usr/local/bin/mailinabox
 # Ask the user for the PRIMARY_HOSTNAME, PUBLIC_IP, PUBLIC_IPV6, and CSR_COUNTRY
 # if values have not already been set in environment variables. When running
 # non-interactively, be sure to set values for all!
-. setup/questions.sh
+source setup/questions.sh
 
 # Automatic configuration, e.g. as used in our Vagrant configuration.
 if [ "$PUBLIC_IP" = "auto" ]; then
@@ -97,19 +112,19 @@ CSR_COUNTRY=$CSR_COUNTRY
 EOF
 
 # Start service configuration.
-. setup/system.sh
-. setup/ssl.sh
-. setup/dns.sh
-. setup/mail-postfix.sh
-. setup/mail-dovecot.sh
-. setup/mail-users.sh
-. setup/dkim.sh
-. setup/spamassassin.sh
-. setup/web.sh
-. setup/webmail.sh
-. setup/owncloud.sh
-. setup/zpush.sh
-. setup/management.sh
+source setup/system.sh
+source setup/ssl.sh
+source setup/dns.sh
+source setup/mail-postfix.sh
+source setup/mail-dovecot.sh
+source setup/mail-users.sh
+source setup/dkim.sh
+source setup/spamassassin.sh
+source setup/web.sh
+source setup/webmail.sh
+source setup/owncloud.sh
+source setup/zpush.sh
+source setup/management.sh
 
 # Write the DNS and nginx configuration files.
 sleep 5 # wait for the daemon to start
@@ -117,7 +132,7 @@ curl -s -d POSTDATA --user $(</var/lib/mailinabox/api.key): http://127.0.0.1:102
 curl -s -d POSTDATA --user $(</var/lib/mailinabox/api.key): http://127.0.0.1:10222/web/update
 
 # If there aren't any mail users yet, create one.
-. setup/firstuser.sh
+source setup/firstuser.sh
 
 # Done.
 echo
@@ -145,4 +160,3 @@ openssl x509 -in $STORAGE_ROOT/ssl/ssl_certificate.pem -noout -fingerprint \
 echo
 echo Then you can confirm the security exception and continue.
 echo
-

setup/system.sh

@@ -1,11 +1,11 @@
 source setup/functions.sh # load our functions
 
-# Base system configuration
+# Basic System Configuration
 # -------------------------
 
-# ### Base packages
+# ### Install Packages
 
-# Update system packages:
+# Update system packages to make sure we have the latest upstream versions of things from Ubuntu.
 
 echo Updating system packages...
 hide_output apt-get update
@@ -19,9 +19,12 @@ hide_output apt-get -y upgrade
 # * unattended-upgrades: Apt tool to install security updates automatically.
 # * ntp: keeps the system time correct
 # * fail2ban: scans log files for repeated failed login attempts and blocks the remote IP at the firewall
+# * sudo: allows privileged users to execute commands as root without being root
+# * coreutils: includes `nproc` tool to report number of processors
+# * bc: allows us to do math to compute sane defaults
 
 apt_install python3 python3-dev python3-pip \
-	wget curl \
+	wget curl sudo coreutils bc \
 	haveged unattended-upgrades ntp fail2ban
 
 # Allow apt to install system updates automatically every day.
@@ -35,8 +38,6 @@ EOF
 
 # ### Firewall
 
-# Turn on the firewall.
-#
 # Various virtualized environments like Docker and some VPSs don't provide #NODOC
 # a kernel that supports iptables. To avoid error-like output in these cases, #NODOC
 # we skip this if the user sets DISABLE_FIREWALL=1. #NODOC
@@ -47,15 +48,15 @@ if [ -z "$DISABLE_FIREWALL" ]; then
 	# Allow incoming connections to SSH.
 	ufw_allow ssh;
 
-	# ssh might be running on an alternate port. Use sshd -T to dump sshd's
-	# settings, find the port it is supposedly running on, and open that port
-	# too.
-	SSH_PORT=$(sshd -T 2>/dev/null | grep "^port " | sed "s/port //")
+	# ssh might be running on an alternate port. Use sshd -T to dump sshd's #NODOC
+	# settings, find the port it is supposedly running on, and open that port #NODOC
+	# too. #NODOC
+	SSH_PORT=$(sshd -T 2>/dev/null | grep "^port " | sed "s/port //") #NODOC
 	if [ ! -z "$SSH_PORT" ]; then
 	if [ "$SSH_PORT" != "22" ]; then
 
-	echo Opening alternate SSH port $SSH_PORT.
-	ufw_allow $SSH_PORT;
+	echo Opening alternate SSH port $SSH_PORT. #NODOC
+	ufw_allow $SSH_PORT #NODOC
 
 	fi
 	fi

setup/web.sh

@@ -5,20 +5,34 @@
 source setup/functions.sh # load our functions
 source /etc/mailinabox.conf # load global vars
 
+# Some Ubuntu images start off with Apache. Remove it since we
+# will use nginx. Use autoremove to remove any Apache depenencies.
+if [ -f /usr/sbin/apache2 ]; then
+	echo Removing apache...
+	hide_output apt-get -y purge apache2 apache2-*
+	hide_output apt-get -y --purge autoremove
+fi
+
+# Install nginx and a PHP FastCGI daemon.
+#
+# Turn off nginx's default website.
+
 apt_install nginx php5-fpm
 
 rm -f /etc/nginx/sites-enabled/default
 
-# copy in a nginx configuration file for common and best-practices
-# SSL settings from @konklone
-cp conf/nginx-ssl.conf /etc/nginx/nginx-ssl.conf
+# Copy in a nginx configuration file for common and best-practices
+# SSL settings from @konklone. Replace STORAGE_ROOT so it can find
+# the DH params.
+sed "s#STORAGE_ROOT#$STORAGE_ROOT#" \
+	conf/nginx-ssl.conf > /etc/nginx/nginx-ssl.conf
 
 # Fix some nginx defaults.
 # The server_names_hash_bucket_size seems to prevent long domain names?
 tools/editconf.py /etc/nginx/nginx.conf -s \
 	server_names_hash_bucket_size="64;"
 
-# Bump up max_children to support more concurrent connections
+# Bump up PHP's max_children to support more concurrent connections
 tools/editconf.py /etc/php5/fpm/pool.d/www.conf -c ';' \
 	pm.max_children=8
 
@@ -26,38 +40,41 @@ tools/editconf.py /etc/php5/fpm/pool.d/www.conf -c ';' \
 # since it depends on what domains we're serving, which we don't know
 # until mail accounts have been created.
 
+# Create the iOS/OS X Mobile Configuration file which is exposed via the
+# nginx configuration at /mailinabox-mobileconfig.
+mkdir -p /var/lib/mailinabox
+chmod a+rx /var/lib/mailinabox
+cat conf/ios-profile.xml \
+	| sed "s/PRIMARY_HOSTNAME/$PRIMARY_HOSTNAME/" \
+	| sed "s/UUID1/$(cat /proc/sys/kernel/random/uuid)/" \
+	| sed "s/UUID2/$(cat /proc/sys/kernel/random/uuid)/" \
+	| sed "s/UUID3/$(cat /proc/sys/kernel/random/uuid)/" \
+	| sed "s/UUID4/$(cat /proc/sys/kernel/random/uuid)/" \
+	 > /var/lib/mailinabox/mobileconfig.xml
+chmod a+r /var/lib/mailinabox/mobileconfig.xml
+
 # make a default homepage
-if [ -d $STORAGE_ROOT/www/static ]; then mv $STORAGE_ROOT/www/static $STORAGE_ROOT/www/default; fi # migration
+if [ -d $STORAGE_ROOT/www/static ]; then mv $STORAGE_ROOT/www/static $STORAGE_ROOT/www/default; fi # migration #NODOC
 mkdir -p $STORAGE_ROOT/www/default
 if [ ! -f $STORAGE_ROOT/www/default/index.html ]; then
 	cp conf/www_default.html $STORAGE_ROOT/www/default/index.html
 fi
 chown -R $STORAGE_USER $STORAGE_ROOT/www
 
-# We previously installed a custom init script to start the PHP FastCGI daemon.
-# Remove it now that we're using php5-fpm.
+# We previously installed a custom init script to start the PHP FastCGI daemon. #NODOC
+# Remove it now that we're using php5-fpm. #NODOC
 if [ -L /etc/init.d/php-fastcgi ]; then
-	echo "Removing /etc/init.d/php-fastcgi, php5-cgi..."
-	rm -f /etc/init.d/php-fastcgi
-	hide_output update-rc.d php-fastcgi remove
-	apt-get -y purge php5-cgi
+	echo "Removing /etc/init.d/php-fastcgi, php5-cgi..." #NODOC
+	rm -f /etc/init.d/php-fastcgi #NODOC
+	hide_output update-rc.d php-fastcgi remove #NODOC
+	apt-get -y purge php5-cgi #NODOC
 fi
 
-# Put our webfinger script into a well-known location.
-for f in webfinger; do
-	cp tools/$f.php /usr/local/bin/mailinabox-$f.php
-	chown www-data.www-data /usr/local/bin/mailinabox-$f.php
-done
-
-# Remove obsoleted scripts.
-# exchange-autodiscover is now handled by Z-Push.
-for f in exchange-autodiscover; do
-	rm -f /usr/local/bin/mailinabox-$f.php
-done
-
-# Make some space for users to customize their webfinger responses.
-mkdir -p $STORAGE_ROOT/webfinger/acct;
-chown -R $STORAGE_USER $STORAGE_ROOT/webfinger
+# Remove obsoleted scripts. #NODOC
+# exchange-autodiscover is now handled by Z-Push. #NODOC
+for f in webfinger exchange-autodiscover; do #NODOC
+	rm -f /usr/local/bin/mailinabox-$f.php #NODOC
+done #NODOC
 
 # Start services.
 restart_service nginx

setup/webmail.sh

@@ -1,3 +1,4 @@
+#!/bin/bash
 # Webmail with Roundcube
 # ----------------------
 
@@ -23,19 +24,30 @@ apt_install \
 	php5 php5-sqlite php5-mcrypt php5-intl php5-json php5-common php-auth php-net-smtp php-net-socket php-net-sieve php-mail-mime php-crypt-gpg php5-gd php5-pspell \
 	tinymce libjs-jquery libjs-jquery-mousewheel libmagic1
 
-# We used to install Roundcube from Ubuntu, without triggering the dependencies
-# on Apache and MySQL, by downloading the debs and installing them manually.
-# Now that we're beyond that, get rid of those debs before installing from source.
-apt-get purge -qq -y roundcube*
+# We used to install Roundcube from Ubuntu, without triggering the dependencies #NODOC
+# on Apache and MySQL, by downloading the debs and installing them manually. #NODOC
+# Now that we're beyond that, get rid of those debs before installing from source. #NODOC
+apt-get purge -qq -y roundcube* #NODOC
 
-# Install Roundcube from source if it is not already present.
-# TODO: Check version?
-if [ ! -d /usr/local/lib/roundcubemail ]; then
+# Install Roundcube from source if it is not already present or if it is out of date.
+VERSION=1.0.3
+needs_update=0 #NODOC
+if [ ! -f /usr/local/lib/roundcubemail/version ]; then
+	# not installed yet #NODOC
+	needs_update=1 #NODOC
+elif [[ $VERSION != `cat /usr/local/lib/roundcubemail/version` ]]; then
+	# checks if the version is what we want
+	needs_update=1 #NODOC
+fi
+if [ $needs_update == 1 ]; then
+	echo installing roudcube webmail $VERSION...
 	rm -f /tmp/roundcube.tgz
-	wget -qO /tmp/roundcube.tgz http://downloads.sourceforge.net/project/roundcubemail/roundcubemail/1.0.2/roundcubemail-1.0.2.tar.gz
+	wget -qO /tmp/roundcube.tgz http://downloads.sourceforge.net/project/roundcubemail/roundcubemail/$VERSION/roundcubemail-$VERSION.tar.gz
 	tar -C /usr/local/lib -zxf /tmp/roundcube.tgz
-	mv /usr/local/lib/roundcubemail-1.0.2/ /usr/local/lib/roundcubemail
+	rm -rf /usr/local/lib/roundcubemail
+	mv /usr/local/lib/roundcubemail-$VERSION/ /usr/local/lib/roundcubemail
 	rm -f /tmp/roundcube.tgz
+	echo $VERSION > /usr/local/lib/roundcubemail/version
 fi
 
 # ### Configuring Roundcube

setup/zpush.sh

@@ -3,7 +3,7 @@
 # Z-Push: The Microsoft Exchange protocol server
 # ----------------------------------------------
 #
-# Mostly for use on iOS which doesn't support IMAP.
+# Mostly for use on iOS which doesn't support IMAP IDLE.
 #
 # Although Ubuntu ships Z-Push (as d-push) it has a dependency on Apache
 # so we won't install it that way.
@@ -21,30 +21,33 @@ apt_install \
 php5enmod imap
 
 # Copy Z-Push into place.
+TARGETHASH=d0cd5a47c53afac5c3b287006dc8a48a1c4ffcd5
 needs_update=0 #NODOC
 if [ ! -f /usr/local/lib/z-push/version ]; then
 	needs_update=1 #NODOC
-elif [[ `curl -s https://api.github.com/repos/fmbiete/Z-Push-contrib/git/refs/heads/master` != `cat /usr/local/lib/z-push/version` ]]; then
+elif [[ $TARGETHASH != `cat /usr/local/lib/z-push/version` ]]; then
 	# checks if the version 
 	needs_update=1 #NODOC
 fi
 if [ $needs_update == 1 ]; then
 	rm -rf /usr/local/lib/z-push
-	rm -f /tmp/zpush.zip
+	rm -f /tmp/zpush-repo
 	echo installing z-push \(fmbiete fork\)...
-	wget -qO /tmp/zpush.zip https://github.com/fmbiete/Z-Push-contrib/archive/master.zip
-	unzip -q /tmp/zpush.zip -d /usr/local/lib/
-	mv /usr/local/lib/Z-Push-contrib-master /usr/local/lib/z-push
+	git clone -q https://github.com/fmbiete/Z-Push-contrib /tmp/zpush-repo
+	(cd /tmp/zpush-repo/; git checkout -q $TARGETHASH;)
+	rm -rf /tmp/zpush-repo/.git
+	mv /tmp/zpush-repo /usr/local/lib/z-push
 	rm -f /usr/sbin/z-push-{admin,top}
 	ln -s /usr/local/lib/z-push/z-push-admin.php /usr/sbin/z-push-admin
 	ln -s /usr/local/lib/z-push/z-push-top.php /usr/sbin/z-push-top
-	rm /tmp/zpush.zip;
-	curl -s https://api.github.com/repos/fmbiete/Z-Push-contrib/git/refs/heads/master > /usr/local/lib/z-push/version
+	rm -f /tmp/zpush-repo
+	echo $TARGETHASH > /usr/local/lib/z-push/version
 fi
 
 # Configure default config.
 sed -i "s^define('TIMEZONE', .*^define('TIMEZONE', '$(cat /etc/timezone)');^" /usr/local/lib/z-push/config.php
 sed -i "s/define('BACKEND_PROVIDER', .*/define('BACKEND_PROVIDER', 'BackendCombined');/" /usr/local/lib/z-push/config.php
+sed -i "s/define('USE_FULLEMAIL_FOR_LOGIN', .*/define('USE_FULLEMAIL_FOR_LOGIN', true);/" /usr/local/lib/z-push/config.php
 
 # Configure BACKEND
 rm -f /usr/local/lib/z-push/backend/combined/config.php

tools/mail.py

@@ -3,7 +3,8 @@
 import sys, getpass, urllib.request, urllib.error, json
 
 def mgmt(cmd, data=None, is_json=False):
-	mgmt_uri = 'http://localhost:10222'
+	# The base URL for the management daemon. (Listens on IPv4 only.)
+	mgmt_uri = 'http://127.0.0.1:10222'
 
 	setup_key_auth(mgmt_uri)
 
@@ -67,12 +68,13 @@ if len(sys.argv) < 2:
 elif sys.argv[1] == "user" and len(sys.argv) == 2:
 	# Dump a list of users, one per line. Mark admins with an asterisk.
 	users = mgmt("/mail/users?format=json", is_json=True)
-	for user in users:
-		if user['status'] == 'inactive': continue
-		print(user['email'], end='')
-		if "admin" in user['privileges']:
-			print("*", end='')
-		print()
+	for domain in users:
+		for user in domain["users"]:
+			if user['status'] == 'inactive': continue
+			print(user['email'], end='')
+			if "admin" in user['privileges']:
+				print("*", end='')
+			print()
 
 elif sys.argv[1] == "user" and sys.argv[2] in ("add", "password"):
 	if len(sys.argv) < 5:
@@ -102,9 +104,10 @@ elif sys.argv[1] == "user" and sys.argv[2] in ("make-admin", "remove-admin") and
 elif sys.argv[1] == "user" and sys.argv[2] == "admins":
 	# Dump a list of admin users.
 	users = mgmt("/mail/users?format=json", is_json=True)
-	for user in users:
-		if "admin" in user['privileges']:
-			print(user['email'])
+	for domain in users:
+		for user in domain["users"]:
+			if "admin" in user['privileges']:
+				print(user['email'])
 
 elif sys.argv[1] == "alias" and len(sys.argv) == 2:
 	print(mgmt("/mail/aliases"))

tools/parse-nginx-log-bootstrap-accesses.py

@@ -0,0 +1,56 @@
+#!/usr/bin/python3
+#
+# This is a tool Josh uses on his box serving mailinabox.email to parse the nginx
+# access log to see how many people are installing Mail-in-a-Box each day, by
+# looking at accesses to the bootstrap.sh script.
+
+import re, glob, gzip, os.path, json
+import dateutil.parser
+
+outfn = "/home/user-data/www/mailinabox.email/install-stats.json"
+
+# Make a unique list of (date, ip address) pairs so we don't double-count
+# accesses that are for the same install.
+accesses = set()
+
+# Scan the current and rotated access logs.
+for fn in glob.glob("/var/log/nginx/access.log*"):
+	# Gunzip if necessary.
+	if fn.endswith(".gz"):
+		f = gzip.open(fn)
+	else:
+		f = open(fn, "rb")
+
+	# Loop through the lines in the access log.
+	with f:
+		for line in f:
+			# Find lines that are GETs on /bootstrap.sh by either curl or wget.
+			m = re.match(rb"(?P<ip>\S+) - - \[(?P<date>.*?)\] \"GET /bootstrap.sh HTTP/.*\" 200 \d+ .* \"(?:curl|wget)", line, re.I)
+			if m:
+				date, time = m.group("date").decode("ascii").split(":", 1)
+				date = dateutil.parser.parse(date).date().isoformat()
+				ip = m.group("ip").decode("ascii")
+				accesses.add( (date, ip) )
+
+# Aggregate by date.
+by_date = { }
+for date, ip in accesses:
+	by_date[date] = by_date.get(date, 0) + 1
+
+# Since logs are rotated, store the statistics permanently in a JSON file.
+# Load in the stats from an existing file.
+if os.path.exists(outfn):
+	existing_data = json.load(open(outfn))
+	for date, count in existing_data:
+		if date not in by_date:
+			by_date[date] = count
+
+# Turn into a list rather than a dict structure to make it ordered.
+by_date = sorted(by_date.items())
+
+# Pop the last one because today's stats are incomplete.
+by_date.pop(-1)
+
+# Write out.
+with open(outfn, "w") as f:
+	json.dump(by_date, f, sort_keys=True, indent=True)

tools/readable_bash.py

@@ -30,33 +30,78 @@ def generate_documentation():
 					color: #555;
 	    	}
 	    	h2, h3 {
-	    		margin-bottom: 1em;
+	    		margin-top: .25em;
+	    		margin-bottom: .75em;
 	    	}
 	    	p {
 	    		margin-bottom: 1em;
 	    	}
+		    	.intro p {
+		    		margin: 1.5em 0;
+		    	}
+		    li {
+		    	margin-bottom: .33em;
+		    }
+
+			.sourcefile {
+	    		padding-top: 1.5em;
+	    		padding-bottom: 1em;
+	    		font-size: 90%;
+	    		text-align: right;
+			}
+				.sourcefile a {
+					color: red;
+				}
+
+	    	.instructions .row.contd {
+	    		border-top: 1px solid #E0E0E0;
+	    	}
+
+	    	.prose {
+	    		padding-top: 1em;    	
+	    		padding-bottom: 1em;
+	    	}
+	    	.terminal {
+	    		background-color: #EEE;
+	    		padding-top: 1em;
+	    		padding-bottom: 1em;
+	    	}
+
+	    	ul {
+	    		padding-left: 1.25em;
+	    	}
 
 	    	pre {
-	    		margin: 1em 1em 1.5em 1em;
 	    		color: black;
+	    		border: 0;
+	    		background: none;
+	    		font-size: 100%;
 	    	}
 
 	    	div.write-to {
-	    		margin: 1em;
-	    		border: 1px solid #999;
+	    		margin: 0 0 1em .5em;
 	    	}
 	    	div.write-to p {
 	    		padding: .5em;
 	    		margin: 0;
 	    	}
 	    	div.write-to .filename {
-	    		background-color: #EEE;
-	    		padding: .5em;
+	    		padding: .25em .5em;
+	    		background-color: #666;
+	    		color: white;
+	    		font-family: monospace;
 	    		font-weight: bold;
 	    	}
+	    	div.write-to .filename span {
+	    		font-family: sans-serif;
+	    		font-weight: normal;
+	    	}
 	    	div.write-to pre {
-	    		padding: .5em;
 	    		margin: 0;
+	    		padding: .5em;
+	    		border: 1px solid #999;
+	    		border-radius: 0;
+	    		font-size: 90%;
 	    	}
 
 	    	pre.shell > div:before {
@@ -67,11 +112,15 @@ def generate_documentation():
     </head>
     <body>
     <div class="container">
-      <div class="row">
+      <div class="row intro">
         <div class="col-xs-12">
         <h1>Build Your Own Mail Server From Scratch</h1>
-        <p>Here&rsquo;s how you can build your own mail server from scratch. This document is generated automatically from our setup script.</p>
+        <p>Here&rsquo;s how you can build your own mail server from scratch.</p>
+        <p>This document is generated automatically from <a href="https://mailinabox.email">Mail-in-a-Box</a>&rsquo;s setup script <a href="https://github.com/mail-in-a-box/mailinabox">source code</a>.</p>
         <hr>
+      </div>
+    </div>
+    <div class="container instructions">
  """)
 
 	parser = Source.parser()
@@ -80,7 +129,7 @@ def generate_documentation():
 			fn = parser.parse_string(line).filename()
 		except:
 			continue
-		if fn in ("setup/preflight.sh", "setup/questions.sh", "setup/firstuser.sh", "setup/management.sh"):
+		if fn in ("setup/start.sh", "setup/preflight.sh", "setup/questions.sh", "setup/firstuser.sh", "setup/management.sh"):
 			continue
 
 		import sys
@@ -91,6 +140,13 @@ def generate_documentation():
 	print("""
         <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.10.1/jquery.min.js"></script>
         <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.2.0/js/bootstrap.min.js"></script>
+        <script>
+        $(function() {
+			$('.terminal').each(function() {
+			  $(this).outerHeight( $(this).parent().innerHeight() );
+			});
+        })
+		</script>
     </body>
 </html>
 """)
@@ -101,8 +157,13 @@ class HashBang(Grammar):
 		return ""
 
 def strip_indent(s):
+	s = s.replace("\t", "    ")
 	lines = s.split("\n")
-	min_indent = min(len(re.match(r"\s*", line).group(0)) for line in lines if len(line) > 0)
+	try:
+		min_indent = min(len(re.match(r"\s*", line).group(0)) for line in lines if len(line) > 0)
+	except ValueError:
+		# No non-empty lines.
+		min_indent = 0
 	lines = [line[min_indent:] for line in lines]
 	return "\n".join(lines)
 
@@ -126,22 +187,25 @@ class Source(Grammar):
 		return BashScript.parse(self.filename())
 
 class CatEOF(Grammar):
-	grammar = (ZERO_OR_MORE(SPACE), L('cat > '), ANY_EXCEPT(WHITESPACE), L(" <<"), OPTIONAL(SPACE), L("EOF;"), EOL, REPEAT(ANY, greedy=False), EOL, L("EOF"), EOL)
+	grammar = (ZERO_OR_MORE(SPACE), L('cat '), L('>') | L('>>'), L(' '), ANY_EXCEPT(WHITESPACE), L(" <<"), OPTIONAL(SPACE), L("EOF"), EOL, REPEAT(ANY, greedy=False), EOL, L("EOF"), EOL)
 	def value(self):
-		content = self[7].string
+		content = self[9].string
 		content = re.sub(r"\\([$])", r"\1", content) # un-escape bash-escaped characters
-		return "<div class='write-to'><div class='filename'>overwrite<br>" + self[2].string + "</div><pre>" + cgi.escape(content) + "</pre></div>\n"
+		return "<div class='write-to'><div class='filename'>%s <span>(%s)</span></div><pre>%s</pre></div>\n" \
+			% (self[4].string,
+			   "overwrite" if ">>" not in self[2].string else "append to",
+			   cgi.escape(content))
 
 class HideOutput(Grammar):
 	grammar = (L("hide_output "), REF("BashElement"))
 	def value(self):
 		return self[1].value()
 
-class SuppressedLine(Grammar):
+class EchoLine(Grammar):
 	grammar = (OPTIONAL(SPACE), L("echo "), REST_OF_LINE, EOL)
 	def value(self):
 		if "|" in self.string  or ">" in self.string:
-			return "<pre class='shell'><div>" + cgi.escape(self.string.strip()) + "</div></pre>\n"
+			return "<pre class='shell'><div>" + recode_bash(self.string.strip()) + "</div></pre>\n"
 		return ""
 
 class EditConf(Grammar):
@@ -150,7 +214,7 @@ class EditConf(Grammar):
 		FILENAME,
 		SPACE,
 		OPTIONAL((LIST_OF(
-			L("-w") | L("-s") | L("-c ';'"),
+			L("-w") | L("-s") | L("-c ;"),
 			sep=SPACE,
 		), SPACE)),
 		REST_OF_LINE,
@@ -159,27 +223,14 @@ class EditConf(Grammar):
 		)
 	def value(self):
 		conffile = self[1]
-		options = [""]
-		mode = 1
-		for c in self[4].string:
-			if mode == 1 and c in (" ", "\t") and options[-1] != "":
-				# new word
-				options.append("")
-			elif mode < 0:
-				# escaped character
-				options[-1] += c
-				mode = -mode
-			elif c == "\\":
-				# escape next character
-				mode = -mode
-			elif mode == 1 and c == '"':
-				mode = 2
-			elif mode == 2 and c == '"':
-				mode = 1
-			else:
-				options[-1] += c
-		if options[-1] == "": options.pop(-1)
-		return "<div class='write-to'><div class='filename'>additional settings for<br>" + self[1].string + "</div><pre>" + "\n".join(cgi.escape(s) for s in options) + "</pre></div>\n"
+		options = []
+		eq = "="
+		if self[3] and "-s" in self[3].string: eq = " "
+		for opt in re.split("\s+", self[4].string):
+			k, v = opt.split("=", 1)
+			v = re.sub(r"\n+", "", fixup_tokens(v)) # not sure why newlines are getting doubled
+			options.append("%s%s%s" % (k, eq, v))
+		return "<div class='write-to'><div class='filename'>" + self[1].string + " <span>(change settings)</span></div><pre>" + "\n".join(cgi.escape(s) for s in options) + "</pre></div>\n"
 
 class CaptureOutput(Grammar):
 	grammar = OPTIONAL(SPACE), WORD("A-Za-z_"), L('=$('), REST_OF_LINE, L(")"), OPTIONAL(L(';')), EOL
@@ -193,8 +244,14 @@ class SedReplace(Grammar):
 	def value(self):
 		return "<div class='write-to'><div class='filename'>edit<br>" + self[8].string + "</div><p>replace</p><pre>" + cgi.escape(self[3].string.replace(".*", ". . .")) + "</pre><p>with</p><pre>" + cgi.escape(self[5].string.replace("\\n", "\n").replace("\\t", "\t")) + "</pre></div>\n"
 
+class EchoPipe(Grammar):
+	grammar = OPTIONAL(SPACE), L("echo "), REST_OF_LINE, L(' | '), REST_OF_LINE, EOL
+	def value(self):
+		text = " ".join("\"%s\"" % s for s in self[2].string.split(" "))
+		return "<pre class='shell'><div>echo " + recode_bash(text) + " \<br> | " + recode_bash(self[4].string) + "</div></pre>\n"
+
 def shell_line(bash):
-	return "<pre class='shell'><div>" + cgi.escape(wrap_lines(bash.strip())) + "</div></pre>\n"
+	return "<pre class='shell'><div>" + recode_bash(bash.strip()) + "</div></pre>\n"
 
 class AptGet(Grammar):
 	grammar = (ZERO_OR_MORE(SPACE), L("apt_install "), REST_OF_LINE, EOL)
@@ -213,13 +270,125 @@ class OtherLine(Grammar):
 	grammar = (REST_OF_LINE, EOL)
 	def value(self):
 		if self.string.strip() == "": return ""
-		return "<pre class='shell'><div>" + cgi.escape(self.string.rstrip()) + "</div></pre>\n"
+		if "source setup/functions.sh" in self.string: return ""
+		if "source /etc/mailinabox.conf" in self.string: return ""
+		return "<pre class='shell'><div>" + recode_bash(self.string.strip()) + "</div></pre>\n"
 
 class BashElement(Grammar):
-	grammar = Comment | Source | CatEOF | SuppressedLine | HideOutput | EditConf | CaptureOutput | SedReplace | AptGet | UfwAllow | RestartService | OtherLine
+	grammar = Comment | CatEOF | EchoPipe | EchoLine | HideOutput | EditConf | SedReplace | AptGet | UfwAllow | RestartService | OtherLine
 	def value(self):
 		return self[0].value()
 
+# Make some special characters to private use Unicode code points.
+bash_special_characters1 = {
+	"\n": "\uE000",
+	" ": "\uE001",
+}
+bash_special_characters2 = {
+	"$": "\uE010",
+}
+bash_escapes = {
+	"n": "\uE020",
+	"t": "\uE021",
+}
+
+def quasitokenize(bashscript):
+	# Make a parse of bash easier by making the tokenization easy.
+	newscript = ""
+	quote_mode = None
+	escape_next = False
+	line_comment = False
+	subshell = 0
+	for c in bashscript:
+		if line_comment:
+			# We're in a comment until the end of the line.
+			newscript += c
+			if c == '\n':
+				line_comment = False
+		elif escape_next:
+			# Previous character was a \. Normally the next character
+			# comes through literally, but escaped newlines are line
+			# continuations and some escapes are for special characters
+			# which we'll recode and then turn back into escapes later.
+			if c == "\n":
+				c = " "
+			elif c in bash_escapes:
+				c = bash_escapes[c]
+			newscript += c
+			escape_next = False
+		elif c == "\\":
+			# Escaping next character.
+			escape_next = True
+		elif quote_mode is None and c in ('"', "'"):
+			# Starting a quoted word.
+			quote_mode = c
+		elif c == quote_mode:
+			# Ending a quoted word.
+			quote_mode = None
+		elif quote_mode is not None and quote_mode != "EOF" and c in bash_special_characters1:
+			# Replace special tokens within quoted words so that they
+			# don't interfere with tokenization later.
+			newscript += bash_special_characters1[c]
+		elif quote_mode is None and c == '#':
+			# Start of a line comment.
+			newscript += c
+			line_comment = True
+		elif quote_mode is None and c == ';' and subshell == 0:
+			# End of a statement.
+			newscript += "\n"
+		elif quote_mode is None and c == '(':
+			# Start of a subshell.
+			newscript += c
+			subshell += 1
+		elif quote_mode is None and c == ')':
+			# End of a subshell.
+			newscript += c
+			subshell -= 1
+		elif quote_mode is None and c == '\t':
+			# Make these just spaces.
+			if newscript[-1] != " ":
+				newscript += " "
+		elif quote_mode is None and c == ' ':
+			# Collapse consecutive spaces.
+			if newscript[-1] != " ":
+				newscript += " "
+		elif c in bash_special_characters2:
+			newscript += bash_special_characters2[c]
+		else:
+			# All other characters.
+			newscript += c
+
+		# "<< EOF" escaping.
+		if quote_mode is None and re.search("<<\s*EOF\n$", newscript):
+			quote_mode = "EOF"
+		elif quote_mode == "EOF" and re.search("\nEOF\n$", newscript):
+			quote_mode = None
+
+	return newscript
+
+def recode_bash(s):
+	def requote(tok):
+		tok = tok.replace("\\", "\\\\")
+		for c in bash_special_characters2:
+			tok = tok.replace(c, "\\" + c)
+		tok = fixup_tokens(tok)
+		if " " in tok or '"' in tok:
+			tok = tok.replace("\"", "\\\"")
+			tok = '"' + tok +'"'
+		else:
+			tok = tok.replace("'", "\\'")
+		return tok
+	return cgi.escape(" ".join(requote(tok) for tok in s.split(" ")))
+
+def fixup_tokens(s):
+	for c, enc in bash_special_characters1.items():
+		s = s.replace(enc, c)
+	for c, enc in bash_special_characters2.items():
+		s = s.replace(enc, c)
+	for esc, c in bash_escapes.items():
+		s = s.replace(c, "\\" + esc)
+	return s
+
 class BashScript(Grammar):
 	grammar = (OPTIONAL(HashBang), REPEAT(BashElement))
 	def value(self):
@@ -228,22 +397,68 @@ class BashScript(Grammar):
 	@staticmethod
 	def parse(fn):
 		if fn in ("setup/functions.sh", "/etc/mailinabox.conf"): return ""
-		parser = BashScript.parser()
 		string = open(fn).read()
-		string = re.sub(r"\s*\\\n\s*", " ", string)
+
+		# tokenize
 		string = re.sub(".* #NODOC\n", "", string)
-		string = re.sub("\n\s*if .*|\n\s*fi|\n\s*else|\n\s*elif .*", "", string)
+		string = re.sub("\n\s*if .*then.*|\n\s*fi|\n\s*else|\n\s*elif .*", "", string)
+		string = quasitokenize(string)
 		string = re.sub("hide_output ", "", string)
+
+		parser = BashScript.parser()
 		result = parser.parse_string(string)
-	
-		v = "<div class='sourcefile'><a href=\"%s\">%s</a></div>\n" % ("https://github.com/mail-in-a-box/mailinabox/tree/master/" + fn, fn)
-		v += "".join(result.value())
+
+		v = "<div class='row'><div class='col-xs-12 sourcefile'>view the bash source for the following section at <a href=\"%s\">%s</a></div></div>\n" \
+			 % ("https://github.com/mail-in-a-box/mailinabox/tree/master/" + fn, fn)
+
+		mode = 0
+		for item in result.value():
+			if item.strip() == "":
+				pass
+			elif item.startswith("<p") and not item.startswith("<pre"):
+				clz = ""
+				if mode == 2:
+					v += "</div>\n" # col
+					v += "</div>\n" # row
+					mode = 0
+					clz = "contd"
+				if mode == 0:
+					v += "<div class='row %s'>\n" % clz
+					v += "<div class='col-md-6 prose'>\n"
+				v += item
+				mode = 1
+			elif item.startswith("<h"):
+				if mode != 0:
+					v += "</div>\n" # col
+					v += "</div>\n" # row
+				v += "<div class='row'>\n"
+				v += "<div class='col-md-6 header'>\n"
+				v += item
+				v += "</div>\n" # col
+				v += "<div class='col-md-6 terminal'> </div>\n"
+				v += "</div>\n" # row
+				mode = 0
+			else:
+				if mode == 0:
+					v += "<div class='row'>\n"
+					v += "<div class='col-md-offset-6 col-md-6 terminal'>\n"
+				elif mode == 1:
+					v += "</div>\n"
+					v += "<div class='col-md-6 terminal'>\n"
+				mode = 2
+				v += item
+
+		v += "</div>\n" # col
+		v += "</div>\n" # row
+
+		v = fixup_tokens(v)
 
 		v = v.replace("</pre>\n<pre class='shell'>", "")
 		v = re.sub("<pre>([\w\W]*?)</pre>", lambda m : "<pre>" + strip_indent(m.group(1)) + "</pre>", v)
 
-		v = re.sub(r"\$?PRIMARY_HOSTNAME", "<b>box.yourdomain.com</b>", v)
-		v = re.sub(r"\$?STORAGE_ROOT", "<code><b>/path/to/user-data</b></code>", v)
+		v = re.sub(r"(\$?)PRIMARY_HOSTNAME", r"<b>box.yourdomain.com</b>", v)
+		v = re.sub(r"\$STORAGE_ROOT", r"<b>$STORE</b>", v)
+		v = re.sub(r"\$CSR_COUNTRY", r"<b>US</b>", v)
 		v = v.replace("`pwd`",  "<code><b>/path/to/mailinabox</b></code>")
 
 		return v

tools/webfinger.php

@@ -1,46 +0,0 @@
-<?php
-	$resource = '';
-
-	if(isset($_GET['resource'])){
-		$resource = $_GET['resource'];
-	}
-
-	// Parse our configuration file to get the STORAGE_ROOT.
-	$STORAGE_ROOT = NULL;
-	foreach (file("/etc/mailinabox.conf") as $line) {
-		$line = explode("=", rtrim($line), 2);
-		if ($line[0] == "STORAGE_ROOT") {
-			$STORAGE_ROOT = $line[1];
-		}
-	}
-	if ($STORAGE_ROOT == NULL) exit("no STORAGE_ROOT");
-
-	// Turn the resource into a file path. First URL-encode the resource
-	// so that it is filepath-safe.
-	$fn = urlencode($resource);
-
-	// Replace the first colon (it's URL-encoded) with a slash since we'll
-	// break off the files into scheme subdirectories.
-	$fn = preg_replace("/%3A/", "/", $fn, 1);
-
-	// Since this is often for email addresses, un-escape @-signs so they
-	// are not odd-looking. It's filename-safe anyway.
-	$fn = preg_replace("/%40/", "@", $fn);
-
-	// Combine with root path.
-	$fn = $STORAGE_ROOT . "/webfinger/" . $fn . ".json";
-
-	// See if the file exists.
-	if (!file_exists($fn)) {
-		header("HTTP/1.0 404 Not Found");
-		exit;
-	}
-
-	header("Content-type: application/json");
-	echo file_get_contents($fn);
-
-	//json_encode(array(
-	//	subject => $resource,
-	//), JSON_PRETTY_PRINT);
-?>
-