Merge branch 'main' into main

CHANGELOG.md

@@ -4,7 +4,63 @@ CHANGELOG
 In Development
 --------------
 
-* Migrate to the ECDSAP256SHA256 DNSSEC algorithm. If a DS record is set for any of your domain names that have DNS hosted on your box, you will be prompted by status checks to update the DS record.
+Mail:
+
+* "SMTPUTF8" is now disabled in Postfix. Because Dovecot still does not support SMTPUTF8, incoming mail to internationalized addresses was bouncing. This fixes incoming mail to internationalized domains (which was probably working prior to v0.40), but it will prevent sending outbound mail to addresses with internationalized local-parts.
+* Upgraded to Roundcube 1.5 Release Candidate.
+
+Firewall:
+
+* Fail2ban's IPv6 support is enabled.
+
+Control panel:
+
+* The control panel menus are now hidden before login, but now non-admins can log in to access the mail and contacts/calendar instruction pages.
+* The login form now disables browser autocomplete in the two-factor authentication code field.
+* After logging in, the default page is now a fast-loading welcome page rather than the slow-loading system status checks page.
+* The backup retention period option now displays for B2 backup targets.
+* The DNSSEC DS record recommendations are cleaned up and now recommend changing records that use SHA1.
+* The Munin monitoring pages no longer require a separate HTTP basic authentication login and can be used if two-factor authentication is turned on.
+* Control panel logins are now tied to a session backend that allows true logouts (rather than an encrypted cookie).
+* Failed logins no longer directly reveal whether the email address corresponds to a user account.
+* Browser dark mode now inverts the color scheme.
+
+Other:
+
+* The mail log tool now doesn't crash if there are email addresess in log messages with invalid UTF-8 characters.
+* Additional nsd.conf files can be placed in /etc/nsd.conf.d.
+
+v0.54 (June 20, 2021)
+---------------------
+
+Mail:
+
+* Forwarded mail using mail filter rules (in Roundcube; "sieve" rules) stopped re-writing the envelope address at some point, causing forwarded mail to often be marked as spam by the final recipient. These forwards will now re-write the envelope as the Mail-in-a-Box user receiving the mail to comply with SPF/DMARC rules.
+* Sending mail is now possible on port 465 with the "SSL" or "TLS" option in mail clients, and this is now the recommended setting. Port 587 with STARTTLS remains available but should be avoided when configuring new mail clients.
+* Roundcube's login cookie is updated to use a new encryption algorithm (AES-256-CBC instead of DES-EDE-CBC).
+
+DNS:
+
+* The ECDSAP256SHA256 DNSSEC algorithm is now available. If a DS record is set for any of your domain names that have DNS hosted on your box, you will be prompted by status checks to update the DS record at your convenience.
+* Null MX records are added for domains that do not serve mail.
+
+Contacts/calendar:
+
+* Updated Nextcloud to 20.0.8, contacts to 3.5.1, calendar to 2.2.0 (#1960).
+
+Control panel:
+
+* Fixed a crash in the status checks.
+* Small wording improvements.
+
+Setup:
+
+* Minor improvements to the setup scripts.
+
+v0.53a (May 8, 2021)
+--------------------
+
+The download URL for Z-Push has been revised becaue the old URL stopped working.
 
 v0.53 (April 12, 2021)
 ----------------------

README.md

@@ -42,6 +42,8 @@ It also includes system management tools:
 * A control panel for adding/removing mail users, aliases, custom DNS records, configuring backups, etc.
 * An API for all of the actions on the control panel
 
+Internationalized domain names are supported and configured easily (but SMTPUTF8 is not supported, unfortunately).
+
 It also supports static website hosting since the box is serving HTTPS anyway. (To serve a website for your domains elsewhere, just add a custom DNS "A" record in you Mail-in-a-Box's control panel to point domains to another server.)
 
 For more information on how Mail-in-a-Box handles your privacy, see the [security details page](security.md).
@@ -58,7 +60,7 @@ Clone this repository and checkout the tag corresponding to the most recent rele
 
 	$ git clone https://github.com/mail-in-a-box/mailinabox
 	$ cd mailinabox
-	$ git checkout v0.53
+	$ git checkout v0.54
 
 Begin the installation.
 

api/mailinabox.yml

@@ -54,24 +54,24 @@ tags:
       System operations, which include system status checks, new version checks
       and reboot status.
 paths:
-  /me:
-    get:
+  /login:
+    post:
       tags:
         - User
-      summary: Get user information
+      summary: Exchange a username and password for a session API key.
       description: |
-        Returns user information. Used for user authentication.
+        Returns user information and a session API key.
 
         Authenticate a user by supplying the auth token as a base64 encoded string in
         format `email:password` using basic authentication headers.
 
         If successful, a long-lived `api_key` is returned which can be used for subsequent
-        requests to the API.
-      operationId: getMe
+        requests to the API in place of the password.
+      operationId: login
       x-codeSamples:
         - lang: curl
           source: |
-            curl -X GET "https://{host}/admin/me" \
+            curl -X GET "https://{host}/admin/login" \
               -u "<email>:<password>"
       responses:
         200:
@@ -92,6 +92,24 @@ paths:
                     privileges:
                       - admin
                     status: ok
+  /logout:
+    post:
+      tags:
+        - User
+      summary: Invalidates a session API key.
+      description: |
+        Invalidates a session API key so that it cannot be used after this API call.
+      operationId: logout
+      x-codeSamples:
+        - lang: curl
+          source: |
+            curl -X GET "https://{host}/admin/logout" \
+              -u "<email>:<session_key>"
+      responses:
+        200:
+          description: Successful operation
+          content:
+            application/json:
   /system/status:
     post:
       tags:
@@ -1803,7 +1821,7 @@ components:
 
         The `access-token` is comprised of the Base64 encoding of `username:password`.
         The `username` is the mail user's email address, and `password` can either be the mail user's
-        password, or the `api_key` returned from the `getMe` operation.
+        password, or the `api_key` returned from the `login` operation.
 
         When using `curl`, you can supply user credentials using the `-u` or `--user` parameter.
   requestBodies:

conf/fail2ban/jails.conf

@@ -38,6 +38,14 @@ logpath  = STORAGE_ROOT/owncloud/nextcloud.log
 maxretry = 20
 findtime = 120
 
+[miab-postfix465]
+enabled  = true
+port     = 465
+filter   = miab-postfix-submission
+logpath  = /var/log/mail.log
+maxretry = 20
+findtime = 30
+
 [miab-postfix587]
 enabled  = true
 port     = 587

conf/ios-profile.xml

@@ -53,7 +53,7 @@
       <key>OutgoingMailServerHostName</key>
       <string>PRIMARY_HOSTNAME</string>
       <key>OutgoingMailServerPortNumber</key>
-      <integer>587</integer>
+      <integer>465</integer>
       <key>OutgoingMailServerUseSSL</key>
       <true/>
       <key>OutgoingPasswordSameAsIncomingPassword</key>

conf/mozilla-autoconfig.xml

@@ -16,8 +16,8 @@
 
       <outgoingServer type="smtp">
          <hostname>PRIMARY_HOSTNAME</hostname>
-         <port>587</port>
-         <socketType>STARTTLS</socketType>
+         <port>465</port>
+         <socketType>SSL</socketType>
          <username>%EMAILADDRESS%</username>
          <authentication>password-cleartext</authentication>
          <addThisServer>true</addThisServer>

conf/zpush/backend_imap.php

@@ -49,7 +49,7 @@ define('IMAP_FROM_LDAP_FULLNAME', '#givenname #sn');
 define('IMAP_SMTP_METHOD', 'sendmail');
 
 global $imap_smtp_params;
-$imap_smtp_params = array('host' => 'ssl://127.0.0.1', 'port' => 587, 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password');
+$imap_smtp_params = array('host' => 'ssl://127.0.0.1', 'port' => 465, 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password');
 
 define('MAIL_MIMEPART_CRLF', "\r\n");
 define('IMAP_MEETING_USE_CALDAV', true);

management/auth.py

@@ -1,6 +1,7 @@
-import base64, os, os.path, hmac, json
+import base64, os, os.path, hmac, json, secrets
+from datetime import timedelta
 
-from flask import make_response
+from expiringdict import ExpiringDict
 
 import utils
 from mailconfig import get_mail_password, get_mail_user_privileges
@@ -9,25 +10,18 @@ from mfa import get_hash_mfa_state, validate_auth_mfa
 DEFAULT_KEY_PATH   = '/var/lib/mailinabox/api.key'
 DEFAULT_AUTH_REALM = 'Mail-in-a-Box Management Server'
 
-class KeyAuthService:
-	"""Generate an API key for authenticating clients
-
-	Clients must read the key from the key file and send the key with all HTTP
-	requests. The key is passed as the username field in the standard HTTP
-	Basic Auth header.
-	"""
+class AuthService:
 	def __init__(self):
 		self.auth_realm = DEFAULT_AUTH_REALM
-		self.key = self._generate_key()
 		self.key_path = DEFAULT_KEY_PATH
+		self.max_session_duration = timedelta(days=2)
 
-	def write_key(self):
-		"""Write key to file so authorized clients can get the key
+		self.init_system_api_key()
+		self.sessions = ExpiringDict(max_len=64, max_age_seconds=self.max_session_duration.total_seconds())
+
+	def init_system_api_key(self):
+		"""Write an API key to a local file so local processes can use the API"""
 
-		The key file is created with mode 0640 so that additional users can be
-		authorized to access the API by granting group/ACL read permissions on
-		the key file.
-		"""
 		def create_file_with_mode(path, mode):
 			# Based on answer by A-B-B: http://stackoverflow.com/a/15015748
 			old_umask = os.umask(0)
@@ -36,73 +30,92 @@ class KeyAuthService:
 			finally:
 				os.umask(old_umask)
 
+		self.key = secrets.token_hex(32)
+
 		os.makedirs(os.path.dirname(self.key_path), exist_ok=True)
 
 		with create_file_with_mode(self.key_path, 0o640) as key_file:
 			key_file.write(self.key + '\n')
 
-	def authenticate(self, request, env):
-		"""Test if the client key passed in HTTP Authorization header matches the service key
-		or if the or username/password passed in the header matches an administrator user.
+	def authenticate(self, request, env, login_only=False, logout=False):
+		"""Test if the HTTP Authorization header's username matches the system key, a session key,
+		or if the username/password passed in the header matches a local user.
 		Returns a tuple of the user's email address and list of user privileges (e.g.
 		('my@email', []) or ('my@email', ['admin']); raises a ValueError on login failure.
-		If the user used an API key, the user's email is returned as None."""
+		If the user used the system API key, the user's email is returned as None since
+		this key is not associated with a user."""
 
+		def parse_http_authorization_basic(header):
 			def decode(s):
 				return base64.b64decode(s.encode('ascii')).decode('ascii')
-
-		def parse_basic_auth(header):
 			if " " not in header:
 				return None, None
 			scheme, credentials = header.split(maxsplit=1)
 			if scheme != 'Basic':
 				return None, None
-
 			credentials = decode(credentials)
 			if ":" not in credentials:
 				return None, None
 			username, password = credentials.split(':', maxsplit=1)
 			return username, password
 
-		header = request.headers.get('Authorization')
-		if not header:
-			raise ValueError("No authorization header provided.")
-
-		username, password = parse_basic_auth(header)
-
+		username, password = parse_http_authorization_basic(request.headers.get('Authorization', ''))
 		if username in (None, ""):
 			raise ValueError("Authorization header invalid.")
-		elif username == self.key:
-			# The user passed the master API key which grants administrative privs.
+
+		if username.strip() == "" and password.strip() == "":
+			raise ValueError("No email address, password, session key, or API key provided.")
+
+		# If user passed the system API key, grant administrative privs. This key
+		# is not associated with a user.
+		if username == self.key and not login_only:
 			return (None, ["admin"])
+
+		# If the password corresponds with a session token for the user, grant access for that user.
+		if self.get_session(username, password, "login", env) and not login_only:
+			sessionid = password
+			session = self.sessions[sessionid]
+			if logout:
+				# Clear the session.
+				del self.sessions[sessionid]
 			else:
-			# The user is trying to log in with a username and either a password
-			# (and possibly a MFA token) or a user-specific API key.
-			return (username, self.check_user_auth(username, password, request, env))
+				# Re-up the session so that it does not expire.
+				self.sessions[sessionid] = session
+
+		# If no password was given, but a username was given, we're missing some information.
+		elif password.strip() == "":
+			raise ValueError("Enter a password.")
+
+		else:
+			# The user is trying to log in with a username and a password
+			# (and possibly a MFA token). On failure, an exception is raised.
+			self.check_user_auth(username, password, request, env)
+
+		# Get privileges for authorization. This call should never fail because by this
+		# point we know the email address is a valid user --- unless the user has been
+		# deleted after the session was granted. On error the call will return a tuple
+		# of an error message and an HTTP status code.
+		privs = get_mail_user_privileges(username, env)
+		if isinstance(privs, tuple): raise ValueError(privs[0])
+
+		# Return the authorization information.
+		return (username, privs)
 
 	def check_user_auth(self, email, pw, request, env):
 		# Validate a user's login email address and password. If MFA is enabled,
 		# check the MFA token in the X-Auth-Token header.
 		#
-		# On success returns a list of privileges (e.g. [] or ['admin']). On login
-		# failure, raises a ValueError with a login error message.
-
-		# Sanity check.
-		if email == "" or pw == "":
-			raise ValueError("Enter an email address and password.")
-
-		# The password might be a user-specific API key. create_user_key raises
-		# a ValueError if the user does not exist.
-		if hmac.compare_digest(self.create_user_key(email, env), pw):
-			# OK.
-			pass
-		else:
-			# Get the hashed password of the user. Raise a ValueError if the
-			# email address does not correspond to a user.
-			pw_hash = get_mail_password(email, env)
+		# On login failure, raises a ValueError with a login error message. On
+		# success, nothing is returned.
 
 		# Authenticate.
 		try:
+			# Get the hashed password of the user. Raise a ValueError if the
+			# email address does not correspond to a user. But wrap it in the
+			# same exception as if a password fails so we don't easily reveal
+			# if an email address is valid.
+			pw_hash = get_mail_password(email, env)
+
 			# Use 'doveadm pw' to check credentials. doveadm will return
 			# a non-zero exit status if the credentials are no good,
 			# and check_call will raise an exception in that case.
@@ -113,7 +126,7 @@ class KeyAuthService:
 				])
 		except:
 			# Login failed.
-				raise ValueError("Invalid password.")
+			raise ValueError("Incorrect email address or password.")
 
 		# If MFA is enabled, check that MFA passes.
 		status, hints = validate_auth_mfa(email, request, env)
@@ -121,38 +134,33 @@ class KeyAuthService:
 			# Login valid. Hints may have more info.
 			raise ValueError(",".join(hints))
 
-		# Get privileges for authorization. This call should never fail because by this
-		# point we know the email address is a valid user. But on error the call will
-		# return a tuple of an error message and an HTTP status code.
-		privs = get_mail_user_privileges(email, env)
-		if isinstance(privs, tuple): raise ValueError(privs[0])
-
-		# Return a list of privileges.
-		return privs
-
-	def create_user_key(self, email, env):
-		# Create a user API key, which is a shared secret that we can re-generate from
-		# static information in our database. The shared secret contains the user's
-		# email address, current hashed password, and current MFA state, so that the
-		# key becomes invalid if any of that information changes.
-		#
-		# Use an HMAC to generate the API key using our master API key as a key,
-		# which also means that the API key becomes invalid when our master API key
-		# changes --- i.e. when this process is restarted.
-		#
-		# Raises ValueError via get_mail_password if the user doesn't exist.
-
-		# Construct the HMAC message from the user's email address and current password.
-		msg = b"AUTH:" + email.encode("utf8") + b" " + get_mail_password(email, env).encode("utf8")
+	def create_user_password_state_token(self, email, env):
+		# Create a token that changes if the user's password or MFA options change
+		# so that sessions become invalid if any of that information changes.
+		msg = get_mail_password(email, env).encode("utf8")
 
 		# Add to the message the current MFA state, which is a list of MFA information.
 		# Turn it into a string stably.
 		msg += b" " + json.dumps(get_hash_mfa_state(email, env), sort_keys=True).encode("utf8")
 
-		# Make the HMAC.
+		# Make a HMAC using the system API key as a hash key.
 		hash_key = self.key.encode('ascii')
 		return hmac.new(hash_key, msg, digestmod="sha256").hexdigest()
 
-	def _generate_key(self):
-		raw_key = os.urandom(32)
-		return base64.b64encode(raw_key).decode('ascii')
+	def create_session_key(self, username, env, type=None):
+		# Create a new session.
+		token = secrets.token_hex(32)
+		self.sessions[token] = {
+			"email": username,
+			"password_token": self.create_user_password_state_token(username, env),
+			"type": type,
+		}
+		return token
+
+	def get_session(self, user_email, session_key, session_type, env):
+		if session_key not in self.sessions: return None
+		session = self.sessions[session_key]
+		if session_type == "login" and session["email"] != user_email: return None
+		if session["type"] != session_type: return None
+		if session["password_token"] != self.create_user_password_state_token(session["email"], env): return None
+		return session

management/daemon.py

@@ -1,5 +1,8 @@
 #!/usr/local/lib/mailinabox/env/bin/python3
 #
+# The API can be accessed on the command line, e.g. use `curl` like so:
+#    curl --user $(</var/lib/mailinabox/api.key): http://localhost:10222/mail/users
+#
 # During development, you can start the Mail-in-a-Box control panel
 # by running this script, e.g.:
 #
@@ -22,7 +25,7 @@ from mfa import get_public_mfa_state, provision_totp, validate_totp_secret, enab
 
 env = utils.load_environment()
 
-auth_service = auth.KeyAuthService()
+auth_service = auth.AuthService()
 
 # We may deploy via a symbolic link, which confuses flask's template finding.
 me = __file__
@@ -53,7 +56,9 @@ def authorized_personnel_only(viewfunc):
 		try:
 			email, privs = auth_service.authenticate(request, env)
 		except ValueError as e:
-			# Write a line in the log recording the failed login
+			# Write a line in the log recording the failed login, unless no authorization header
+			# was given which can happen on an initial request before a 403 response.
+			if "Authorization" in request.headers:
 				log_failed_login(request)
 
 			# Authentication failed.
@@ -131,11 +136,12 @@ def index():
 		csr_country_codes=csr_country_codes,
 	)
 
-@app.route('/me')
-def me():
+# Create a session key by checking the username/password in the Authorization header.
+@app.route('/login', methods=["POST"])
+def login():
 	# Is the caller authorized?
 	try:
-		email, privs = auth_service.authenticate(request, env)
+		email, privs = auth_service.authenticate(request, env, login_only=True)
 	except ValueError as e:
 		if "missing-totp-token" in str(e):
 			return json_response({
@@ -150,19 +156,29 @@ def me():
 				"reason": str(e),
 			})
 
+	# Return a new session for the user.
 	resp = {
 		"status": "ok",
 		"email": email,
 		"privileges": privs,
+		"api_key": auth_service.create_session_key(email, env, type='login'),
 	}
 
-	# Is authorized as admin? Return an API key for future use.
-	if "admin" in privs:
-		resp["api_key"] = auth_service.create_user_key(email, env)
+	app.logger.info("New login session created for {}".format(email))
 
 	# Return.
 	return json_response(resp)
 
+@app.route('/logout', methods=["POST"])
+def logout():
+	try:
+		email, _ = auth_service.authenticate(request, env, logout=True)
+		app.logger.info("{} logged out".format(email))
+	except ValueError as e:
+		pass
+	finally:
+		return json_response({ "status": "ok" })
+
 # MAIL
 
 @app.route('/mail/users')
@@ -219,7 +235,7 @@ def mail_aliases():
 	if request.args.get("format", "") == "json":
 		return json_response(get_mail_aliases_ex(env))
 	else:
-		return "".join(address+"\t"+receivers+"\t"+(senders or "")+"\n" for address, receivers, senders in get_mail_aliases(env))
+		return "".join(address+"\t"+receivers+"\t"+(senders or "")+"\n" for address, receivers, senders, auto in get_mail_aliases(env))
 
 @app.route('/mail/aliases/add', methods=['POST'])
 @authorized_personnel_only
@@ -638,16 +654,42 @@ def privacy_status_set():
 # MUNIN
 
 @app.route('/munin/')
-@app.route('/munin/<path:filename>')
 @authorized_personnel_only
-def munin(filename=""):
-	# Checks administrative access (@authorized_personnel_only) and then just proxies
-	# the request to static files.
+def munin_start():
+	# Munin pages, static images, and dynamically generated images are served
+	# outside of the AJAX API. We'll start with a 'start' API that sets a cookie
+	# that subsequent requests will read for authorization. (We don't use cookies
+	# for the API to avoid CSRF vulnerabilities.)
+	response = make_response("OK")
+	response.set_cookie("session", auth_service.create_session_key(request.user_email, env, type='cookie'),
+	    max_age=60*30, secure=True, httponly=True, samesite="Strict") # 30 minute duration
+	return response
+
+def check_request_cookie_for_admin_access():
+	session = auth_service.get_session(None, request.cookies.get("session", ""), "cookie", env)
+	if not session: return False
+	privs = get_mail_user_privileges(session["email"], env)
+	if not isinstance(privs, list): return False
+	if "admin" not in privs: return False
+	return True
+
+def authorized_personnel_only_via_cookie(f):
+	@wraps(f)
+	def g(*args, **kwargs):
+		if not check_request_cookie_for_admin_access():
+			return Response("Unauthorized", status=403, mimetype='text/plain', headers={})
+		return f(*args, **kwargs)
+	return g
+
+@app.route('/munin/<path:filename>')
+@authorized_personnel_only_via_cookie
+def munin_static_file(filename=""):
+	# Proxy the request to static files.
 	if filename == "": filename = "index.html"
 	return send_from_directory("/var/cache/munin/www", filename)
 
 @app.route('/munin/cgi-graph/<path:filename>')
-@authorized_personnel_only
+@authorized_personnel_only_via_cookie
 def munin_cgi(filename):
 	""" Relay munin cgi dynazoom requests
 	/usr/lib/munin/cgi/munin-cgi-graph is a perl cgi script in the munin package
@@ -724,30 +766,10 @@ if __name__ == '__main__':
 		# Turn on Flask debugging.
 		app.debug = True
 
-		# Use a stable-ish master API key so that login sessions don't restart on each run.
-		# Use /etc/machine-id to seed the key with a stable secret, but add something
-		# and hash it to prevent possibly exposing the machine id, using the time so that
-		# the key is not valid indefinitely.
-		import hashlib
-		with open("/etc/machine-id") as f:
-			api_key = f.read()
-		api_key += "|" + str(int(time.time() / (60*60*2)))
-		hasher = hashlib.sha1()
-		hasher.update(api_key.encode("ascii"))
-		auth_service.key = hasher.hexdigest()
-
-	if "APIKEY" in os.environ: auth_service.key = os.environ["APIKEY"]
-
 	if not app.debug:
 		app.logger.addHandler(utils.create_syslog_handler())
 
-	# For testing on the command line, you can use `curl` like so:
-	#    curl --user $(</var/lib/mailinabox/api.key): http://localhost:10222/mail/users
-	auth_service.write_key()
-
-	# For testing in the browser, you can copy the API key that's output to the
-	# debug console and enter that as the username
-	app.logger.info('API key: ' + auth_service.key)
+	#app.logger.info('API key: ' + auth_service.key)
 
 	# Start the application server. Listens on 127.0.0.1 (IPv4 only).
 	app.run(port=10222)

management/dns_update.py

@@ -9,7 +9,6 @@ import ipaddress
 import rtyaml
 import dns.resolver
 
-from mailconfig import get_mail_domains, get_mail_aliases
 from utils import shell, load_env_vars_from_file, safe_domain_name, sort_domains
 from ssl_certificates import get_ssl_certificates, check_certificate
 
@@ -20,10 +19,14 @@ from ssl_certificates import get_ssl_certificates, check_certificate
 DOMAIN_RE = "^(?!\-)(?:[*][.])?(?:[a-zA-Z\d\-_]{0,62}[a-zA-Z\d_]\.){1,126}(?!\d+)[a-zA-Z\d_]{1,63}(\.?)$"
 
 def get_dns_domains(env):
-	# Add all domain names in use by email users and mail aliases and ensure
-	# PRIMARY_HOSTNAME is in the list.
+	# Add all domain names in use by email users and mail aliases, any
+	# domains we serve web for (except www redirects because that would
+	# lead to infinite recursion here) and ensure PRIMARY_HOSTNAME is in the list.
+	from mailconfig import get_mail_domains
+	from web_update import get_web_domains
 	domains = set()
-	domains |= get_mail_domains(env)
+	domains |= set(get_mail_domains(env))
+	domains |= set(get_web_domains(env, include_www_redirects=False))
 	domains.add(env['PRIMARY_HOSTNAME'])
 	return domains
 
@@ -97,7 +100,8 @@ def do_dns_update(env, force=False):
 	if len(updated_domains) > 0:
 		shell('check_call', ["/usr/sbin/service", "nsd", "restart"])
 
-	# Write the OpenDKIM configuration tables for all of the domains.
+	# Write the OpenDKIM configuration tables for all of the mail domains.
+	from mailconfig import get_mail_domains
 	if write_opendkim_tables(get_mail_domains(env), env):
 		# Settings changed. Kick opendkim.
 		shell('check_call', ["/usr/sbin/service", "opendkim", "restart"])
@@ -122,22 +126,47 @@ def build_zones(env):
 	domains = get_dns_domains(env)
 	zonefiles = get_dns_zones(env)
 
-	# Custom records to add to zones.
-	additional_records = list(get_custom_dns_config(env))
+	# Create a dictionary of domains to a set of attributes for each
+	# domain, such as whether there are mail users at the domain.
+	from mailconfig import get_mail_domains
 	from web_update import get_web_domains
-	www_redirect_domains = set(get_web_domains(env)) - set(get_web_domains(env, include_www_redirects=False))
+	mail_domains = set(get_mail_domains(env))
+	mail_user_domains = set(get_mail_domains(env, users_only=True)) # i.e. will log in for mail, Nextcloud
+	web_domains = set(get_web_domains(env))
+	auto_domains = web_domains - set(get_web_domains(env, include_auto=False))
+	domains |= auto_domains # www redirects not included in the initial list, see above
+
+	# Add ns1/ns2+PRIMARY_HOSTNAME which must also have A/AAAA records
+	# when the box is acting as authoritative DNS server for its domains.
+	for ns in ("ns1", "ns2"):
+		d = ns + "." + env["PRIMARY_HOSTNAME"]
+		domains.add(d)
+		auto_domains.add(d)
+
+	domains = {
+		domain: {
+			"user": domain in mail_user_domains,
+			"mail": domain in mail_domains,
+			"web": domain in web_domains,
+			"auto": domain in auto_domains,
+		}
+		for domain in domains
+	}
 
 	# For MTA-STS, we'll need to check if the PRIMARY_HOSTNAME certificate is
 	# singned and valid. Check that now rather than repeatedly for each domain.
-	env["-primary-hostname-certificate-is-valid"] = is_domain_cert_signed_and_valid(env["PRIMARY_HOSTNAME"], env)
+	domains[env["PRIMARY_HOSTNAME"]]["certificate-is-valid"] = is_domain_cert_signed_and_valid(env["PRIMARY_HOSTNAME"], env)
+
+	# Load custom records to add to zones.
+	additional_records = list(get_custom_dns_config(env))
 
 	# Build DNS records for each zone.
 	for domain, zonefile in zonefiles:
 		# Build the records to put in the zone.
-		records = build_zone(domain, domains, additional_records, www_redirect_domains, env)
+		records = build_zone(domain, domains, additional_records, env)
 		yield (domain, zonefile, records)
 
-def build_zone(domain, all_domains, additional_records, www_redirect_domains, env, is_zone=True):
+def build_zone(domain, domain_properties, additional_records, env, is_zone=True):
 	records = []
 
 	# For top-level zones, define the authoritative name servers.
@@ -149,10 +178,10 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 	# 'False' in the tuple indicates these records would not be used if the zone
 	# is managed outside of the box.
 	if is_zone:
-		# Obligatory definition of ns1.PRIMARY_HOSTNAME.
+		# Obligatory NS record to ns1.PRIMARY_HOSTNAME.
 		records.append((None,  "NS",  "ns1.%s." % env["PRIMARY_HOSTNAME"], False))
 
-		# Define ns2.PRIMARY_HOSTNAME or whatever the user overrides.
+		# NS record to ns2.PRIMARY_HOSTNAME or whatever the user overrides.
 		# User may provide one or more additional nameservers
 		secondary_ns_list = get_secondary_dns(additional_records, mode="NS") \
 			or ["ns2." + env["PRIMARY_HOSTNAME"]]
@@ -162,15 +191,6 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 
 	# In PRIMARY_HOSTNAME...
 	if domain == env["PRIMARY_HOSTNAME"]:
-		# Define ns1 and ns2.
-		# 'False' in the tuple indicates these records would not be used if the zone
-		# is managed outside of the box.
-		records.append(("ns1", "A", env["PUBLIC_IP"], False))
-		records.append(("ns2", "A", env["PUBLIC_IP"], False))
-		if env.get('PUBLIC_IPV6'):
-			records.append(("ns1", "AAAA", env["PUBLIC_IPV6"], False))
-			records.append(("ns2", "AAAA", env["PUBLIC_IPV6"], False))
-
 		# Set the A/AAAA records. Do this early for the PRIMARY_HOSTNAME so that the user cannot override them
 		# and we can provide different explanatory text.
 		records.append((None, "A", env["PUBLIC_IP"], "Required. Sets the IP address of the box."))
@@ -188,10 +208,11 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 
 	# Add DNS records for any subdomains of this domain. We should not have a zone for
 	# both a domain and one of its subdomains.
-	subdomains = [d for d in all_domains if d.endswith("." + domain)]
+	if is_zone: # don't recurse when we're just loading data for a subdomain
+		subdomains = [d for d in domain_properties if d.endswith("." + domain)]
 		for subdomain in subdomains:
 			subdomain_qname = subdomain[0:-len("." + domain)]
-		subzone = build_zone(subdomain, [], additional_records, www_redirect_domains, env, is_zone=False)
+			subzone = build_zone(subdomain, domain_properties, additional_records, env, is_zone=False)
 			for child_qname, child_rtype, child_value, child_explanation in subzone:
 				if child_qname == None:
 					child_qname = subdomain_qname
@@ -224,21 +245,23 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 				continue
 		records.append((qname, rtype, value, "(Set by user.)"))
 
-	# Add defaults if not overridden by the user's custom settings (and not otherwise configured).
+	# Add A/AAAA defaults if not overridden by the user's custom settings (and not otherwise configured).
 	# Any CNAME or A record on the qname overrides A and AAAA. But when we set the default A record,
 	# we should not cause the default AAAA record to be skipped because it thinks a custom A record
 	# was set. So set has_rec_base to a clone of the current set of DNS settings, and don't update
 	# during this process.
 	has_rec_base = list(records)
+	a_expl = "Required. May have a different value. Sets the IP address that %s resolves to for web hosting and other services besides mail. The A record must be present but its value does not affect mail delivery." % domain
+	if domain_properties[domain]["auto"]:
+		if domain.startswith("ns1.") or domain.startswith("ns2."): a_expl = False # omit from 'External DNS' page since this only applies if box is its own DNS server
+		if domain.startswith("www."): a_expl = "Optional. Sets the IP address that %s resolves to so that the box can provide a redirect to the parent domain." % domain
+		if domain.startswith("mta-sts."): a_expl = "Optional. MTA-STS Policy Host serving /.well-known/mta-sts.txt."
+		if domain.startswith("autoconfig."): a_expl = "Provides email configuration autodiscovery support for Thunderbird Autoconfig."
+		if domain.startswith("autodiscover."): a_expl = "Provides email configuration autodiscovery support for Z-Push ActiveSync Autodiscover."
 	defaults = [
-		(None,  "A",    env["PUBLIC_IP"],       "Required. May have a different value. Sets the IP address that %s resolves to for web hosting and other services besides mail. The A record must be present but its value does not affect mail delivery." % domain),
+		(None,  "A",    env["PUBLIC_IP"], a_expl),
 		(None,  "AAAA", env.get('PUBLIC_IPV6'), "Optional. Sets the IPv6 address that %s resolves to, e.g. for web hosting. (It is not necessary for receiving mail on this domain.)" % domain),
 	]
-	if "www." + domain in www_redirect_domains:
-		defaults += [
-			("www", "A",    env["PUBLIC_IP"],       "Optional. Sets the IP address that www.%s resolves to so that the box can provide a redirect to the parent domain." % domain),
-			("www", "AAAA", env.get('PUBLIC_IPV6'), "Optional. Sets the IPv6 address that www.%s resolves to so that the box can provide a redirect to the parent domain." % domain),
-		]
 	for qname, rtype, value, explanation in defaults:
 		if value is None or value.strip() == "": continue # skip IPV6 if not set
 		if not is_zone and qname == "www": continue # don't create any default 'www' subdomains on what are themselves subdomains
@@ -252,6 +275,7 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 	# Don't pin the list of records that has_rec checks against anymore.
 	has_rec_base = records
 
+	if domain_properties[domain]["mail"]:
 		# The MX record says where email for the domain should be delivered: Here!
 		if not has_rec(None, "MX", prefix="10 "):
 			records.append((None,  "MX",  "10 %s." % env["PRIMARY_HOSTNAME"], "Required. Specifies the hostname (and priority) of the machine that handles @%s mail." % domain))
@@ -276,40 +300,16 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 		if not has_rec("_dmarc", "TXT", prefix="v=DMARC1; "):
 			records.append(("_dmarc", "TXT", 'v=DMARC1; p=quarantine', "Recommended. Specifies that mail that does not originate from the box but claims to be from @%s or which does not have a valid DKIM signature is suspect and should be quarantined by the recipient's mail system." % domain))
 
-	# For any subdomain with an A record but no SPF or DMARC record, add strict policy records.
-	all_resolvable_qnames = set(r[0] for r in records if r[1] in ("A", "AAAA"))
-	for qname in all_resolvable_qnames:
-		if not has_rec(qname, "TXT", prefix="v=spf1 "):
-			records.append((qname,  "TXT", 'v=spf1 -all', "Recommended. Prevents use of this domain name for outbound mail by specifying that no servers are valid sources for mail from @%s. If you do send email from this domain name you should either override this record such that the SPF rule does allow the originating server, or, take the recommended approach and have the box handle mail for this domain (simply add any receiving alias at this domain name to make this machine treat the domain name as one of its mail domains)." % (qname + "." + domain)))
-		dmarc_qname = "_dmarc" + ("" if qname is None else "." + qname)
-		if not has_rec(dmarc_qname, "TXT", prefix="v=DMARC1; "):
-			records.append((dmarc_qname, "TXT", 'v=DMARC1; p=reject', "Recommended. Prevents use of this domain name for outbound mail by specifying that the SPF rule should be honoured for mail from @%s." % (qname + "." + domain)))
-
+	if domain_properties[domain]["user"]:
 		# Add CardDAV/CalDAV SRV records on the non-primary hostname that points to the primary hostname
 		# for autoconfiguration of mail clients (so only domains hosting user accounts need it).
 		# The SRV record format is priority (0, whatever), weight (0, whatever), port, service provider hostname (w/ trailing dot).
-	if domain != env["PRIMARY_HOSTNAME"] and domain in get_mail_domains(env, users_only=True):
+		if domain != env["PRIMARY_HOSTNAME"]:
 			for dav in ("card", "cal"):
 				qname = "_" + dav + "davs._tcp"
 				if not has_rec(qname, "SRV"):
 					records.append((qname, "SRV", "0 0 443 " + env["PRIMARY_HOSTNAME"] + ".", "Recommended. Specifies the hostname of the server that handles CardDAV/CalDAV services for email addresses on this domain."))
 
-	# Adds autoconfiguration A records for all domains that there are user accounts at.
-	# This allows the following clients to automatically configure email addresses in the respective applications.
-	# autodiscover.* - Z-Push ActiveSync Autodiscover
-	# autoconfig.* - Thunderbird Autoconfig
-	if domain in get_mail_domains(env, users_only=True):
-		autodiscover_records = [
-			("autodiscover", "A", env["PUBLIC_IP"], "Provides email configuration autodiscovery support for Z-Push ActiveSync Autodiscover."),
-			("autodiscover", "AAAA", env["PUBLIC_IPV6"], "Provides email configuration autodiscovery support for Z-Push ActiveSync Autodiscover."),
-			("autoconfig", "A", env["PUBLIC_IP"], "Provides email configuration autodiscovery support for Thunderbird Autoconfig."),
-			("autoconfig", "AAAA", env["PUBLIC_IPV6"], "Provides email configuration autodiscovery support for Thunderbird Autoconfig.")
-		]
-		for qname, rtype, value, explanation in autodiscover_records:
-			if value is None or value.strip() == "": continue # skip IPV6 if not set
-			if not has_rec(qname, rtype):
-				records.append((qname, rtype, value, explanation))
-
 	# If this is a domain name that there are email addresses configured for, i.e. "something@"
 	# this domain name, then the domain name is a MTA-STS (https://tools.ietf.org/html/rfc8461)
 	# Policy Domain.
@@ -325,12 +325,12 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 	# subdomain must be valid certificate for that domain. Do not set an MTA-STS policy if either
 	# certificate in use is not valid (e.g. because it is self-signed and a valid certificate has not
 	# yet been provisioned). Since we cannot provision a certificate without A/AAAA records, we
-	# always set them --- only the TXT records depend on there being valid certificates.
-	mta_sts_records = [
-		("mta-sts", "A", env["PUBLIC_IP"], "Optional. MTA-STS Policy Host serving /.well-known/mta-sts.txt."),
-		("mta-sts", "AAAA", env.get('PUBLIC_IPV6'), "Optional. MTA-STS Policy Host serving /.well-known/mta-sts.txt."),
-	]
-	if domain in get_mail_domains(env) and env["-primary-hostname-certificate-is-valid"] and is_domain_cert_signed_and_valid("mta-sts." + domain, env):
+	# always set them (by including them in the www domains) --- only the TXT records depend on there
+	# being valid certificates.
+	mta_sts_records = [ ]
+	if domain_properties[domain]["mail"] \
+	  and domain_properties[env["PRIMARY_HOSTNAME"]]["certificate-is-valid"] \
+	  and is_domain_cert_signed_and_valid("mta-sts." + domain, env):
 		# Compute an up-to-32-character hash of the policy file. We'll take a SHA-1 hash of the policy
 		# file (20 bytes) and encode it as base-64 (28 bytes, using alphanumeric alternate characters
 		# instead of '+' and '/' which are not allowed in an MTA-STS policy id) but then just take its
@@ -347,10 +347,28 @@ def build_zone(domain, all_domains, additional_records, www_redirect_domains, en
 		if env.get("MTA_STS_TLSRPT_RUA") and not has_rec("_smtp._tls", "TXT", prefix="v=TLSRPTv1;"):
 			mta_sts_records.append(("_smtp._tls", "TXT", "v=TLSRPTv1; rua=" + env["MTA_STS_TLSRPT_RUA"], "Optional. Enables MTA-STS reporting."))
 	for qname, rtype, value, explanation in mta_sts_records:
-		if value is None or value.strip() == "": continue # skip IPV6 if not set
 		if not has_rec(qname, rtype):
 			records.append((qname, rtype, value, explanation))
 
+	# Add no-mail-here records for any qname that has an A or AAAA record
+	# but no MX record. This would include domain itself if domain is a
+	# non-mail domain and also may include qnames from custom DNS records.
+	# Do this once at the end of generating a zone.
+	if is_zone:
+		qnames_with_a = set(qname for (qname, rtype, value, explanation) in records if rtype in ("A", "AAAA"))
+		qnames_with_mx = set(qname for (qname, rtype, value, explanation) in records if rtype == "MX")
+		for qname in qnames_with_a - qnames_with_mx:
+			# Mark this domain as not sending mail with hard-fail SPF and DMARC records.
+			d = (qname+"." if qname else "") + domain
+			if not has_rec(qname, "TXT", prefix="v=spf1 "):
+				records.append((qname,  "TXT", 'v=spf1 -all', "Recommended. Prevents use of this domain name for outbound mail by specifying that no servers are valid sources for mail from @%s. If you do send email from this domain name you should either override this record such that the SPF rule does allow the originating server, or, take the recommended approach and have the box handle mail for this domain (simply add any receiving alias at this domain name to make this machine treat the domain name as one of its mail domains)." % d))
+			if not has_rec("_dmarc" + ("."+qname if qname else ""), "TXT", prefix="v=DMARC1; "):
+				records.append(("_dmarc" + ("."+qname if qname else ""), "TXT", 'v=DMARC1; p=reject', "Recommended. Prevents use of this domain name for outbound mail by specifying that the SPF rule should be honoured for mail from @%s." % d))
+
+			# And with a null MX record (https://explained-from-first-principles.com/email/#null-mx-record)
+			if not has_rec(qname, "MX"):
+				records.append((qname, "MX", '0 .', "Recommended. Prevents use of this domain name for incoming mail."))
+
 	# Sort the records. The None records *must* go first in the nsd zone file. Otherwise it doesn't matter.
 	records.sort(key = lambda rec : list(reversed(rec[0].split(".")) if rec[0] is not None else ""))
 
@@ -360,7 +378,6 @@ def is_domain_cert_signed_and_valid(domain, env):
 	cert = get_ssl_certificates(env).get(domain)
 	if not cert: return False # no certificate provisioned
 	cert_status = check_certificate(domain, cert['certificate'], cert['private-key'])
-	print(domain, cert_status)
 	return cert_status[0] == 'OK'
 
 ########################################################################
@@ -587,7 +604,7 @@ def get_dns_zonefile(zone, env):
 
 def write_nsd_conf(zonefiles, additional_records, env):
 	# Write the list of zones to a configuration file.
-	nsd_conf_file = "/etc/nsd/zones.conf"
+	nsd_conf_file = "/etc/nsd/nsd.conf.d/zones.conf"
 	nsdconf = ""
 
 	# Append the zones.

management/mail_log.py

@@ -586,7 +586,7 @@ def scan_postfix_submission_line(date, log, collector):
 def readline(filename):
     """ A generator that returns the lines of a file
     """
-    with open(filename) as file:
+    with open(filename, errors='replace') as file:
         while True:
           line = file.readline()
           if not line:

management/mailconfig.py

@@ -16,8 +16,8 @@ import idna
 
 def validate_email(email, mode=None):
 	# Checks that an email address is syntactically valid. Returns True/False.
-	# Until Postfix supports SMTPUTF8, an email address may contain ASCII
-	# characters only; IDNs must be IDNA-encoded.
+	# An email address may contain ASCII characters only because Dovecot's
+	# authentication mechanism gets confused with other character encodings.
 	#
 	# When mode=="user", we're checking that this can be a user account name.
 	# Dovecot has tighter restrictions - letters, numbers, underscore, and
@@ -186,9 +186,9 @@ def get_admins(env):
 	return users
 
 def get_mail_aliases(env):
-	# Returns a sorted list of tuples of (address, forward-tos, permitted-senders).
+	# Returns a sorted list of tuples of (address, forward-tos, permitted-senders, auto).
 	c = open_database(env)
-	c.execute('SELECT source, destination, permitted_senders FROM aliases')
+	c.execute('SELECT source, destination, permitted_senders, 0 as auto FROM aliases UNION SELECT source, destination, permitted_senders, 1 as auto FROM auto_aliases')
 	aliases = { row[0]: row for row in c.fetchall() } # make dict
 
 	# put in a canonical order: sort by domain, then by email address lexicographically
@@ -208,7 +208,7 @@ def get_mail_aliases_ex(env):
 	#         address_display: "name@domain.tld", # full Unicode
 	#         forwards_to: ["user1@domain.com", "receiver-only1@domain.com", ...],
 	#         permitted_senders: ["user1@domain.com", "sender-only1@domain.com", ...] OR null,
-	#         required: True|False
+	#         auto: True|False
 	#       },
 	#       ...
 	#     ]
@@ -216,12 +216,13 @@ def get_mail_aliases_ex(env):
 	#   ...
 	# ]
 
-	required_aliases = get_required_aliases(env)
 	domains = {}
-	for address, forwards_to, permitted_senders in get_mail_aliases(env):
+	for address, forwards_to, permitted_senders, auto in get_mail_aliases(env):
+		# skip auto domain maps since these are not informative in the control panel's aliases list
+		if auto and address.startswith("@"): continue
+
 		# get alias info
 		domain = get_domain(address)
-		required = (address in required_aliases)
 
 		# add to list
 		if not domain in domains:
@@ -234,7 +235,7 @@ def get_mail_aliases_ex(env):
 			"address_display": prettify_idn_email_address(address),
 			"forwards_to": [prettify_idn_email_address(r.strip()) for r in forwards_to.split(",")],
 			"permitted_senders": [prettify_idn_email_address(s.strip()) for s in permitted_senders.split(",")] if permitted_senders is not None else None,
-			"required": required,
+			"auto": bool(auto),
 		})
 
 	# Sort domains.
@@ -242,7 +243,7 @@ def get_mail_aliases_ex(env):
 
 	# Sort aliases within each domain first by required-ness then lexicographically by address.
 	for domain in domains:
-		domain["aliases"].sort(key = lambda alias : (alias["required"], alias["address"]))
+		domain["aliases"].sort(key = lambda alias : (alias["auto"], alias["address"]))
 	return domains
 
 def get_domain(emailaddr, as_unicode=True):
@@ -261,11 +262,12 @@ def get_domain(emailaddr, as_unicode=True):
 def get_mail_domains(env, filter_aliases=lambda alias : True, users_only=False):
 	# Returns the domain names (IDNA-encoded) of all of the email addresses
 	# configured on the system. If users_only is True, only return domains
-	# with email addresses that correspond to user accounts.
+	# with email addresses that correspond to user accounts. Exclude Unicode
+	# forms of domain names listed in the automatic aliases table.
 	domains = []
 	domains.extend([get_domain(login, as_unicode=False) for login in get_mail_users(env)])
 	if not users_only:
-		domains.extend([get_domain(address, as_unicode=False) for address, *_ in get_mail_aliases(env) if filter_aliases(address) ])
+		domains.extend([get_domain(address, as_unicode=False) for address, _, _, auto in get_mail_aliases(env) if filter_aliases(address) and not auto ])
 	return set(domains)
 
 def add_mail_user(email, pw, privs, env):
@@ -512,6 +514,13 @@ def remove_mail_alias(address, env, do_kick=True):
 		# Update things in case any domains are removed.
 		return kick(env, "alias removed")
 
+def add_auto_aliases(aliases, env):
+	conn, c = open_database(env, with_connection=True)
+	c.execute("DELETE FROM auto_aliases");
+	for source, destination in aliases.items():
+		c.execute("INSERT INTO auto_aliases (source, destination) VALUES (?, ?)", (source, destination))
+	conn.commit()
+
 def get_system_administrator(env):
 	return "administrator@" + env['PRIMARY_HOSTNAME']
 
@@ -555,39 +564,34 @@ def kick(env, mail_result=None):
 	if mail_result is not None:
 		results.append(mail_result + "\n")
 
-	# Ensure every required alias exists.
+	auto_aliases = { }
 
-	existing_users = get_mail_users(env)
-	existing_alias_records = get_mail_aliases(env)
-	existing_aliases = set(a for a, *_ in existing_alias_records) # just first entry in tuple
-	required_aliases = get_required_aliases(env)
-
-	def ensure_admin_alias_exists(address):
-		# If a user account exists with that address, we're good.
-		if address in existing_users:
-			return
-
-		# If the alias already exists, we're good.
-		if address in existing_aliases:
-			return
-
-		# Doesn't exist.
+	# Mape required aliases to the administrator alias (which should be created manually).
 	administrator = get_system_administrator(env)
-		if address == administrator: return # don't make an alias from the administrator to itself --- this alias must be created manually
-		add_mail_alias(address, administrator, "", env, do_kick=False)
-		if administrator not in existing_aliases: return # don't report the alias in output if the administrator alias isn't in yet -- this is a hack to supress confusing output on initial setup
-		results.append("added alias %s (=> %s)\n" % (address, administrator))
+	required_aliases = get_required_aliases(env)
+	for alias in required_aliases:
+		if alias == administrator: continue # don't make an alias from the administrator to itself --- this alias must be created manually
+		auto_aliases[alias] = administrator
 
-	for address in required_aliases:
-		ensure_admin_alias_exists(address)
+	# Add domain maps from Unicode forms of IDNA domains to the ASCII forms stored in the alias table.
+	for domain in get_mail_domains(env):
+		try:
+			domain_unicode = idna.decode(domain.encode("ascii"))
+			if domain == domain_unicode: continue # not an IDNA/Unicode domain
+			auto_aliases["@" + domain_unicode] = "@" + domain
+		except (ValueError, UnicodeError, idna.IDNAError):
+			continue
 
-	# Remove auto-generated postmaster/admin on domains we no
-	# longer have any other email addresses for.
-	for address, forwards_to, *_ in existing_alias_records:
+	add_auto_aliases(auto_aliases, env)
+
+	# Remove auto-generated postmaster/admin/abuse alises from the main aliases table.
+	# They are now stored in the auto_aliases table.
+	for address, forwards_to, permitted_senders, auto in get_mail_aliases(env):
 		user, domain = address.split("@")
 		if user in ("postmaster", "admin", "abuse") \
 			and address not in required_aliases \
-			and forwards_to == get_system_administrator(env):
+			and forwards_to == get_system_administrator(env) \
+			and not auto:
 			remove_mail_alias(address, env, do_kick=False)
 			results.append("removed alias %s (was to %s; domain no longer used for email)\n" % (address, forwards_to))
 

management/status_checks.py

@@ -34,6 +34,7 @@ def get_services():
 		{ "name": "SSH Login (ssh)", "port": get_ssh_port(), "public": True, },
 		{ "name": "Public DNS (nsd4)", "port": 53, "public": True, },
 		{ "name": "Incoming Mail (SMTP/postfix)", "port": 25, "public": True, },
+		{ "name": "Outgoing Mail (SMTP 465/postfix)", "port": 465, "public": True, },
 		{ "name": "Outgoing Mail (SMTP 587/postfix)", "port": 587, "public": True, },
 		#{ "name": "Postfix/master", "port": 10587, "public": True, },
 		{ "name": "IMAPS (dovecot)", "port": 993, "public": True, },
@@ -611,14 +612,16 @@ def check_dnssec(domain, env, output, dns_zonefiles, is_checking_primary=False):
 			#
 			# But it may not be preferred. Only algorithm 13 is preferred. Warn if any of the
 			# matched zones uses a different algorithm.
-			if set(r[1] for r in matched_ds) == { '13' }: # all are alg 13
+			if set(r[1] for r in matched_ds) == { '13' } and set(r[2] for r in matched_ds) <= { '2', '4' }: # all are alg 13 and digest type 2 or 4
 				output.print_ok("DNSSEC 'DS' record is set correctly at registrar.")
 				return
-			elif '13' in set(r[1] for r in matched_ds): # some but not all are alg 13
-				output.print_ok("DNSSEC 'DS' record is set correctly at registrar. (Records using algorithm other than ECDSAP256SHA256 should be removed.)")
+			elif len([r for r in matched_ds if r[1] == '13' and r[2] in ( '2', '4' )]) > 0: # some but not all are alg 13
+				output.print_ok("DNSSEC 'DS' record is set correctly at registrar. (Records using algorithm other than ECDSAP256SHA256 and digest types other than SHA-256/384 should be removed.)")
 				return
 			else: # no record uses alg 13
-				output.print_warning("DNSSEC 'DS' record set at registrar is valid but should be updated to ECDSAP256SHA256 (see below).")
+				output.print_warning("""DNSSEC 'DS' record set at registrar is valid but should be updated to ECDSAP256SHA256 and SHA-256 (see below).
+				IMPORTANT: Do not delete existing DNSSEC 'DS' records for this domain until confirmation that the new DNSSEC 'DS' record
+				for this domain is valid.""")
 		else:
 			if is_checking_primary:
 				output.print_error("""The DNSSEC 'DS' record for %s is incorrect. See further details below.""" % domain)
@@ -629,7 +632,8 @@ def check_dnssec(domain, env, output, dns_zonefiles, is_checking_primary=False):
 
 	output.print_line("""Follow the instructions provided by your domain name registrar to set a DS record.
 		Registrars support different sorts of DS records. Use the first option that works:""")
-	preferred_ds_order = [(7, 1), (7, 2), (8, 4), (13, 4), (8, 1), (8, 2), (13, 1), (13, 2)] # low to high
+	preferred_ds_order = [(7, 2), (8, 4), (13, 4), (8, 2), (13, 2)] # low to high, see https://github.com/mail-in-a-box/mailinabox/issues/1998
+
 	def preferred_ds_order_func(ds_suggestion):
 		k = (int(ds_suggestion['alg']), int(ds_suggestion['digalg']))
 		if k in preferred_ds_order:
@@ -637,11 +641,12 @@ def check_dnssec(domain, env, output, dns_zonefiles, is_checking_primary=False):
 		return -1 # index before first item
 	output.print_line("")
 	for i, ds_suggestion in enumerate(sorted(expected_ds_records.values(), key=preferred_ds_order_func, reverse=True)):
+		if preferred_ds_order_func(ds_suggestion) == -1: continue # don't offer record types that the RFC says we must not offer
 		output.print_line("")
 		output.print_line("Option " + str(i+1) + ":")
 		output.print_line("----------")
 		output.print_line("Key Tag: " + ds_suggestion['keytag'])
-		output.print_line("Key Flags: KSK")
+		output.print_line("Key Flags: KSK (256)")
 		output.print_line("Algorithm: %s / %s" % (ds_suggestion['alg'], ds_suggestion['alg_name']))
 		output.print_line("Digest Type: %s / %s" % (ds_suggestion['digalg'], ds_suggestion['digalg_name']))
 		output.print_line("Digest: " + ds_suggestion['digest'])
@@ -664,6 +669,8 @@ def check_mail_domain(domain, env, output):
 
 	if mx is None:
 		mxhost = None
+	elif mx == "[timeout]":
+		mxhost = None
 	else:
 		# query_dns returns a semicolon-delimited list
 		# of priority-host pairs.

management/templates/aliases.html

@@ -1,6 +1,6 @@
 <style>
 #alias_table .actions > * { padding-right: 3px; }
-#alias_table .alias-required .remove { display: none }
+#alias_table .alias-auto .actions > * { display: none }
 </style>
 
 <h2>Aliases</h2>
@@ -163,7 +163,7 @@ function show_aliases() {
           var n = $("#alias-template").clone();
           n.attr('id', '');
 
-          if (alias.required) n.addClass('alias-required');
+          if (alias.auto) n.addClass('alias-auto');
           n.attr('data-address', alias.address_display); // this is decoded from IDNA, but will get re-coded to IDNA on the backend
           n.find('td.address').text(alias.address_display)
           for (var j = 0; j < alias.forwards_to.length; j++)

management/templates/index.html

@@ -62,6 +62,37 @@
 	    ol li {
 	       margin-bottom: 1em;
 	    }
+          
+            .if-logged-in { display: none; }
+            .if-logged-in-admin { display: none; }
+
+      /* The below only gets used if it is supported */
+      @media (prefers-color-scheme: dark) {
+        /* Invert invert lightness but not hue */
+        html {
+          filter: invert(100%) hue-rotate(180deg);
+        }
+
+        /* Set explicit background color (necessary for Firefox) */
+        html {
+          background-color: #111;
+        }
+          
+        /* Override Boostrap theme here to give more contrast. The black turns to white by the filter. */
+        .form-control {
+          color: black !important;
+        }          
+
+        /* Revert the invert for the navbar */
+        button, div.navbar {
+          filter: invert(100%) hue-rotate(180deg);
+        }
+          
+        /* Revert the revert for the dropdowns */
+        ul.dropdown-menu {
+          filter: invert(100%) hue-rotate(180deg);
+        }
+      }
         </style>
         <link rel="stylesheet" href="/admin/assets/bootstrap/css/bootstrap-theme.min.css">
     </head>
@@ -83,7 +114,7 @@
         </div>
         <div class="navbar-collapse collapse">
           <ul class="nav navbar-nav">
-            <li class="dropdown">
+            <li class="dropdown if-logged-in-admin">
               <a href="#" class="dropdown-toggle" data-toggle="dropdown">System <b class="caret"></b></a>
               <ul class="dropdown-menu">
                 <li><a href="#system_status" onclick="return show_panel(this);">Status Checks</a></li>
@@ -93,10 +124,11 @@
                 <li class="dropdown-header">Advanced Pages</li>
                 <li><a href="#custom_dns" onclick="return show_panel(this);">Custom DNS</a></li>
                 <li><a href="#external_dns" onclick="return show_panel(this);">External DNS</a></li>
-                <li><a href="/admin/munin" target="_blank">Munin Monitoring</a></li>
+                <li><a href="#munin" onclick="return show_panel(this);">Munin Monitoring</a></li>
               </ul>
             </li>
-            <li class="dropdown">
+            <li><a href="#mail-guide" onclick="return show_panel(this);" class="if-logged-in-not-admin">Mail</a></li>
+            <li class="dropdown if-logged-in-admin">
               <a href="#" class="dropdown-toggle" data-toggle="dropdown">Mail &amp; Users <b class="caret"></b></a>
               <ul class="dropdown-menu">
                 <li><a href="#mail-guide" onclick="return show_panel(this);">Instructions</a></li>
@@ -107,17 +139,21 @@
                 <li><a href="#mfa" onclick="return show_panel(this);">Two-Factor Authentication</a></li>
               </ul>
             </li>
-            <li><a href="#sync_guide" onclick="return show_panel(this);">Contacts/Calendar</a></li>
-            <li><a href="#web" onclick="return show_panel(this);">Web</a></li>
+            <li><a href="#sync_guide" onclick="return show_panel(this);" class="if-logged-in">Contacts/Calendar</a></li>
+            <li><a href="#web" onclick="return show_panel(this);" class="if-logged-in-admin">Web</a></li>
           </ul>
           <ul class="nav navbar-nav navbar-right">
-            <li><a href="#" onclick="do_logout(); return false;" style="color: white">Log out</a></li>
+            <li class="if-logged-in"><a href="#" onclick="do_logout(); return false;" style="color: white">Log out</a></li>
           </ul>
         </div><!--/.navbar-collapse -->
       </div>
     </div>
 
     <div class="container">
+      <div id="panel_welcome" class="admin_panel">
+      {% include "welcome.html" %}
+      </div>
+
       <div id="panel_system_status" class="admin_panel">
       {% include "system-status.html" %}
       </div>
@@ -166,6 +202,10 @@
       {% include "ssl.html" %}
       </div>
 
+      <div id="panel_munin" class="admin_panel">
+      {% include "munin.html" %}
+      </div>
+
       <hr>
 
       <footer>
@@ -298,7 +338,7 @@ function ajax_with_indicator(options) {
   return false; // handy when called from onclick
 }
 
-var api_credentials = ["", ""];
+var api_credentials = null;
 function api(url, method, data, callback, callback_error, headers) {
   // from http://www.webtoolkit.info/javascript-base64.html
   function base64encode(input) {
@@ -346,9 +386,10 @@ function api(url, method, data, callback, callback_error, headers) {
       // We don't store user credentials in a cookie to avoid the hassle of CSRF
       // attacks. The Authorization header only gets set in our AJAX calls triggered
       // by user actions.
+      if (api_credentials)
         xhr.setRequestHeader(
           'Authorization',
-        'Basic ' + base64encode(api_credentials[0] + ':' + api_credentials[1]));
+          'Basic ' + base64encode(api_credentials.username + ':' + api_credentials.session_key));
     },
     success: callback,
     error: callback_error || default_error,
@@ -367,12 +408,21 @@ var current_panel = null;
 var switch_back_to_panel = null;
 
 function do_logout() {
-  api_credentials = ["", ""];
+  // Clear the session from the backend.
+  api("/logout", "POST");
+
+  // Forget the token.
+  api_credentials = null;
   if (typeof localStorage != 'undefined')
     localStorage.removeItem("miab-cp-credentials");
   if (typeof sessionStorage != 'undefined')
     sessionStorage.removeItem("miab-cp-credentials");
+
+  // Return to the start.
   show_panel('login');
+
+  // Reset menus.
+  show_hide_menus();
 }
 
 function show_panel(panelid) {
@@ -395,14 +445,22 @@ function show_panel(panelid) {
 
 $(function() {
   // Recall saved user credentials.
+  try {
     if (typeof sessionStorage != 'undefined' && sessionStorage.getItem("miab-cp-credentials"))
-    api_credentials = sessionStorage.getItem("miab-cp-credentials").split(":");
+      api_credentials = JSON.parse(sessionStorage.getItem("miab-cp-credentials"));
     else if (typeof localStorage != 'undefined' && localStorage.getItem("miab-cp-credentials"))
-    api_credentials = localStorage.getItem("miab-cp-credentials").split(":");
+      api_credentials = JSON.parse(localStorage.getItem("miab-cp-credentials"));
+  } catch (_) {
+  }
+
+  // Toggle menu state.
+  show_hide_menus();
 
   // Recall what the user was last looking at.
-  if (typeof localStorage != 'undefined' && localStorage.getItem("miab-cp-lastpanel")) {
+  if (api_credentials != null && typeof localStorage != 'undefined' && localStorage.getItem("miab-cp-lastpanel")) {
     show_panel(localStorage.getItem("miab-cp-lastpanel"));
+  } else if (api_credentials != null) {
+    show_panel('welcome');
   } else {
     show_panel('login');
   }

management/templates/login.html

@@ -64,7 +64,7 @@ sudo management/cli.py user make-admin me@{{hostname}}</pre>
     <div class="form-group" id="loginOtp">
       <label for="loginOtpInput" class="col-sm-3 control-label">Code</label>
       <div class="col-sm-9">
-          <input type="text" class="form-control" id="loginOtpInput" placeholder="6-digit code">
+          <input type="text" class="form-control" id="loginOtpInput" placeholder="6-digit code" autocomplete="off">
           <div class="help-block" style="margin-top: 5px; font-size: 90%">Enter the six-digit code generated by your two factor authentication app.</div>
       </div>
     </div>
@@ -102,11 +102,11 @@ function do_login() {
   }
 
   // Exchange the email address & password for an API key.
-  api_credentials = [$('#loginEmail').val(), $('#loginPassword').val()]
+  api_credentials = { username: $('#loginEmail').val(), session_key: $('#loginPassword').val() }
 
   api(
-  "/me",
-  "GET",
+  "/login",
+  "POST",
   {},
   function(response) {
     // This API call always succeeds. It returns a JSON object indicating
@@ -141,7 +141,9 @@ function do_login() {
       // Login succeeded.
 
       // Save the new credentials.
-      api_credentials = [response.email, response.api_key];
+      api_credentials = { username: response.email,
+                          session_key: response.api_key,
+                          privileges: response.privileges };
 
       // Try to wipe the username/password information.
       $('#loginEmail').val('');
@@ -152,18 +154,21 @@ function do_login() {
       // Remember the credentials.
       if (typeof localStorage != 'undefined' && typeof sessionStorage != 'undefined') {
         if ($('#loginRemember').val()) {
-          localStorage.setItem("miab-cp-credentials", api_credentials.join(":"));
+          localStorage.setItem("miab-cp-credentials", JSON.stringify(api_credentials));
           sessionStorage.removeItem("miab-cp-credentials");
         } else {
           localStorage.removeItem("miab-cp-credentials");
-          sessionStorage.setItem("miab-cp-credentials", api_credentials.join(":"));
+          sessionStorage.setItem("miab-cp-credentials", JSON.stringify(api_credentials));
         }
       }
 
+      // Toggle menus.
+      show_hide_menus();
+
       // Open the next panel the user wants to go to. Do this after the XHR response
       // is over so that we don't start a new XHR request while this one is finishing,
       // which confuses the loading indicator.
-      setTimeout(function() { show_panel(!switch_back_to_panel || switch_back_to_panel == "login" ? 'system_status' : switch_back_to_panel) }, 300);
+      setTimeout(function() { show_panel(!switch_back_to_panel || switch_back_to_panel == "login" ? 'welcome' : switch_back_to_panel) }, 300);
     }
   },
   undefined,
@@ -183,4 +188,19 @@ function show_login() {
     }
   });
 }
+
+function show_hide_menus() {
+  var is_logged_in = (api_credentials != null);
+  var privs = api_credentials ? api_credentials.privileges : [];
+  $('.if-logged-in').toggle(is_logged_in);
+  $('.if-logged-in-admin, .if-logged-in-not-admin').toggle(false);
+  if (is_logged_in) {
+    $('.if-logged-in-not-admin').toggle(true);
+    privs.forEach(function(priv) {
+      $('.if-logged-in-' + priv).toggle(true);
+      $('.if-logged-in-not-' + priv).toggle(false);
+    });
+  }
+  $('.if-not-logged-in').toggle(!is_logged_in);
+}
 </script>

management/templates/mail-guide.html

@@ -30,8 +30,8 @@
 					<tr><th>Mail server</th> <td>{{hostname}}</td>
 					<tr><th>IMAP Port</th> <td>993</td></tr>
 					<tr><th>IMAP Security</th> <td>SSL or TLS</td></tr>
-					<tr><th>SMTP Port</th> <td>587</td></tr>
-					<tr><th>SMTP Security</td> <td>STARTTLS <small>(&ldquo;always&rdquo; or &ldquo;required&rdquo;, if prompted)</small></td></tr>
+					<tr><th>SMTP Port</th> <td>465</td></tr>
+					<tr><th>SMTP Security</td> <td>SSL or TLS</td></tr>
 					<tr><th>Username:</th> <td>Your whole email address.</td></tr>
 					<tr><th>Password:</th> <td>Your mail password.</td></tr>
 					</table>

management/templates/munin.html

@@ -0,0 +1,20 @@
+<h2>Munin Monitoring</h2>
+
+<style>
+</style>
+
+<p>Opening munin in a new tab... You may need to allow pop-ups for this site.</p>
+
+<script>
+function show_munin() {
+  // Set the cookie.
+  api(
+    "/munin",
+    "GET",
+    { },
+    function(r) {
+      // Redirect.
+      window.open("/admin/munin/index.html", "_blank");
+    });
+}
+</script>

management/templates/sync-guide.html

@@ -30,9 +30,9 @@
 
 			<table class="table">
 			<thead><tr><th>For...</th> <th>Use...</th></tr></thead>
-			<tr><td>Contacts and Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=at.bitfire.davdroid">DAVdroid</a> ($3.69; free <a href="https://f-droid.org/packages/at.bitfire.davdroid/">here</a>)</td></tr>
-			<tr><td>Only Contacts</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.carddav.sync">CardDAV-Sync free beta</a> (free)</td></tr>
-			<tr><td>Only Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.caldav.lib">CalDAV-Sync</a> ($2.89)</td></tr>
+			<tr><td>Contacts and Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=at.bitfire.davdroid">DAVx⁵</a> ($5.99; free <a href="https://f-droid.org/packages/at.bitfire.davdroid/">here</a>)</td></tr>
+			<tr><td>Only Contacts</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.carddav.sync">CardDAV-Sync free</a> (free)</td></tr>
+			<tr><td>Only Calendar</td> <td><a href="https://play.google.com/store/apps/details?id=org.dmfs.caldav.lib">CalDAV-Sync</a> ($2.99)</td></tr>
 			</table>
 
 			<p>Use the following settings:</p>

management/templates/system-backup.html

@@ -5,7 +5,7 @@
 
 <h2>Backup Status</h2>
 
-<p>The box makes an incremental backup each night. By default the backup is stored on the machine itself, but you can also have it stored on Amazon S3.</p>
+<p>The box makes an incremental backup each night. By default the backup is stored on the machine itself, but you can also store in on S3-compatible services like Amazon Web Services (AWS).</p>
 
 <h3>Configuration</h3>
 
@@ -17,7 +17,7 @@
         <option value="off">Nowhere (Disable Backups)</option>
         <option value="local">{{hostname}}</option>
         <option value="rsync">rsync</option>
-        <option value="s3">Amazon S3</option>
+        <option value="s3">S3 (Amazon or compatible) </option>
         <option value="b2">Backblaze B2</option>
       </select>
     </div>
@@ -73,8 +73,8 @@
   <!-- S3 BACKUP -->
   <div class="form-group backup-target-s3">
     <div class="col-sm-10 col-sm-offset-2">
-      <p>Backups are stored in an Amazon Web Services S3 bucket. You must have an AWS account already.</p>
-      <p>You MUST manually copy the encryption password from <tt class="backup-encpassword-file"></tt> to a safe and secure location. You will need this file to decrypt backup files. It is NOT stored in your Amazon S3 bucket.</p>
+      <p>Backups are stored in an S3-compatible bucket. You must have an AWS or other S3 service account already.</p>
+      <p>You MUST manually copy the encryption password from <tt class="backup-encpassword-file"></tt> to a safe and secure location. You will need this file to decrypt backup files. It is <b>NOT</b> stored in your S3 bucket.</p>
     </div>
   </div>
   <div class="form-group backup-target-s3">
@@ -84,7 +84,7 @@
         {% for name, host in backup_s3_hosts %}
           <option value="{{host}}">{{name}}</option>
         {% endfor %}
-        <option value="other">Other</option>
+        <option value="other">Other (non AWS)</option>
       </select>
     </div>
   </div>
@@ -138,7 +138,7 @@
       </div>
   </div>
   <!-- Common -->
-  <div class="form-group backup-target-local backup-target-rsync backup-target-s3">
+  <div class="form-group backup-target-local backup-target-rsync backup-target-s3 backup-target-b2">
     <label for="min-age" class="col-sm-2 control-label">Retention Days:</label>
     <div class="col-sm-8">
       <input type="number" class="form-control" rows="1" id="min-age">

management/templates/users.html

@@ -203,7 +203,7 @@ function users_set_password(elem) {
   var email = $(elem).parents('tr').attr('data-email');
 
   var yourpw = "";
-  if (api_credentials != null && email == api_credentials[0])
+  if (api_credentials != null && email == api_credentials.username)
     yourpw = "<p class='text-danger'>If you change your own password, you will be logged out of this control panel and will need to log in again.</p>";
 
   show_modal_confirm(
@@ -232,7 +232,7 @@ function users_remove(elem) {
   var email = $(elem).parents('tr').attr('data-email');
 
   // can't remove yourself
-  if (api_credentials != null && email == api_credentials[0]) {
+  if (api_credentials != null && email == api_credentials.username) {
     show_modal_error("Archive User", "You cannot archive your own account.");
     return;
   }
@@ -264,7 +264,7 @@ function mod_priv(elem, add_remove) {
   var priv = $(elem).parents('td').find('.name').text();
 
   // can't remove your own admin access
-  if (priv == "admin" && add_remove == "remove" && api_credentials != null && email == api_credentials[0]) {
+  if (priv == "admin" && add_remove == "remove" && api_credentials != null && email == api_credentials.username) {
     show_modal_error("Modify Privileges", "You cannot remove the admin privilege from yourself.");
     return;
   }

management/templates/welcome.html

@@ -0,0 +1,16 @@
+<style>
+  .title {
+    margin: 1em;
+    text-align: center;
+  }
+
+  .subtitle {
+    margin: 2em;
+    text-align: center;
+  }
+</style>
+
+<h1 class="title">{{hostname}}</h1>
+
+<p class="subtitle">Welcome to your Mail-in-a-Box control panel.</p>
+

management/web_update.py

@@ -9,7 +9,7 @@ from dns_update import get_custom_dns_config, get_dns_zones
 from ssl_certificates import get_ssl_certificates, get_domain_ssl_files, check_certificate
 from utils import shell, safe_domain_name, sort_domains
 
-def get_web_domains(env, include_www_redirects=True, exclude_dns_elsewhere=True):
+def get_web_domains(env, include_www_redirects=True, include_auto=True, exclude_dns_elsewhere=True):
 	# What domains should we serve HTTP(S) for?
 	domains = set()
 
@@ -18,15 +18,16 @@ def get_web_domains(env, include_www_redirects=True, exclude_dns_elsewhere=True)
 	# if the user wants to make one.
 	domains |= get_mail_domains(env)
 
-	if include_www_redirects:
+	if include_www_redirects and include_auto:
 		# Add 'www.' subdomains that we want to provide default redirects
 		# to the main domain for. We'll add 'www.' to any DNS zones, i.e.
 		# the topmost of each domain we serve.
 		domains |= set('www.' + zone for zone, zonefile in get_dns_zones(env))
 
+	if include_auto:
 		# Add Autoconfiguration domains for domains that there are user accounts at:
 		# 'autoconfig.' for Mozilla Thunderbird auto setup.
-	# 'autodiscover.' for Activesync autodiscovery.
+		# 'autodiscover.' for ActiveSync autodiscovery (Z-Push).
 		domains |= set('autoconfig.' + maildomain for maildomain in get_mail_domains(env, users_only=True))
 		domains |= set('autodiscover.' + maildomain for maildomain in get_mail_domains(env, users_only=True))
 
@@ -160,17 +161,27 @@ def make_domain_config(domain, templates, ssl_certificates, env):
 			for path, url in yaml.get("proxies", {}).items():
 				# Parse some flags in the fragment of the URL.
 				pass_http_host_header = False
+				proxy_redirect_off = False
+				frame_options_header_sameorigin = False
 				m = re.search("#(.*)$", url)
 				if m:
 					for flag in m.group(1).split(","):
 						if flag == "pass-http-host":
 							pass_http_host_header = True
+						elif flag == "no-proxy-redirect":
+							proxy_redirect_off = True
+						elif flag == "frame-options-sameorigin":
+							frame_options_header_sameorigin = True
 					url = re.sub("#(.*)$", "", url)
 
 				nginx_conf_extra += "\tlocation %s {" % path
 				nginx_conf_extra += "\n\t\tproxy_pass %s;" % url
+				if proxy_redirect_off:
+					nginx_conf_extra += "\n\t\tproxy_redirect off;"
 				if pass_http_host_header:
 					nginx_conf_extra += "\n\t\tproxy_set_header Host $http_host;"
+				if frame_options_header_sameorigin:
+					nginx_conf_extra += "\n\t\tproxy_set_header X-Frame-Options SAMEORIGIN;"
 				nginx_conf_extra += "\n\t\tproxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;"
 				nginx_conf_extra += "\n\t\tproxy_set_header X-Forwarded-Host $http_host;"
 				nginx_conf_extra += "\n\t\tproxy_set_header X-Forwarded-Proto $scheme;"
@@ -251,3 +262,4 @@ def get_web_domains_info(env):
 		}
 		for domain in get_web_domains(env)
 	]
+

security.md

@@ -32,7 +32,7 @@ The box's administrator and its (non-administrative) mail users must sometimes c
 
 These services are protected by [TLS](https://en.wikipedia.org/wiki/Transport_Layer_Security):
 
-* SMTP Submission (port 587). Mail users submit outbound mail through SMTP with STARTTLS on port 587.
+* SMTP Submission (ports 465/587). Mail users submit outbound mail through SMTP with TLS (port 465) or STARTTLS (port 587).
 * IMAP/POP (ports 993, 995). Mail users check for incoming mail through IMAP or POP over TLS.
 * HTTPS (port 443). Webmail, the Exchange/ActiveSync protocol, the administrative control panel, and any static hosted websites are accessed over HTTPS.
 
@@ -44,7 +44,7 @@ The services all follow these rules:
 
 Additionally:
 
-* SMTP Submission (port 587) will not accept user credentials without STARTTLS (true also of SMTP on port 25 in case of client misconfiguration), and the submission port won't accept mail without encryption. The minimum cipher key length is 128 bits. (The box is of course configured not to be an open relay. User credentials are required to send outbound mail.) ([source](setup/mail-postfix.sh))
+* SMTP Submission on port 587 will not accept user credentials without STARTTLS (true also of SMTP on port 25 in case of client misconfiguration), and the submission port won't accept mail without encryption. The minimum cipher key length is 128 bits. (The box is of course configured not to be an open relay. User credentials are required to send outbound mail.) ([source](setup/mail-postfix.sh))
 * HTTPS (port 443): The HTTPS Strict Transport Security header is set. A redirect from HTTP to HTTPS is offered. The [Qualys SSL Labs test](https://www.ssllabs.com/ssltest) should report an A+ grade. ([source 1](conf/nginx-ssl.conf), [source 2](conf/nginx.conf))
 
 ### Password Storage
@@ -69,8 +69,6 @@ The following services are protected: SSH, IMAP (dovecot), SMTP submission (post
 
 Some other services running on the box may be missing fail2ban filters.
 
-`fail2ban` only blocks IPv4 addresses, however. If the box has a public IPv6 address, it is not protected from these attacks.
-
 Outbound Mail
 -------------
 

setup/bootstrap.sh

@@ -18,11 +18,11 @@ if [ -z "$TAG" ]; then
 	# space, but if we put it in a comment it would confuse the status checks!)
 	# to get the latest version, so the first such line must be the one that we
 	# want to display in status checks.
-	if [ "`lsb_release -d | sed 's/.*:\s*//' | sed 's/18\.04\.[0-9]/18.04/' `" == "Ubuntu 18.04 LTS" ]; then
+	if [ "$(lsb_release -d | sed 's/.*:\s*//' | sed 's/18\.04\.[0-9]/18.04/' )" == "Ubuntu 18.04 LTS" ]; then
 		# This machine is running Ubuntu 18.04.
-		TAG=v0.53
+		TAG=v0.54
 
-	elif [ "`lsb_release -d | sed 's/.*:\s*//' | sed 's/14\.04\.[0-9]/14.04/' `" == "Ubuntu 14.04 LTS" ]; then
+	elif [ "$(lsb_release -d | sed 's/.*:\s*//' | sed 's/14\.04\.[0-9]/14.04/' )" == "Ubuntu 14.04 LTS" ]; then
 		# This machine is running Ubuntu 14.04.
 		echo "You are installing the last version of Mail-in-a-Box that will"
 		echo "support Ubuntu 14.04. If this is a new installation of Mail-in-a-Box,"
@@ -68,11 +68,11 @@ fi
 cd $HOME/mailinabox
 
 # Update it.
-if [ "$TAG" != `git describe` ]; then
+if [ "$TAG" != $(git describe) ]; then
 	echo Updating Mail-in-a-Box to $TAG . . .
 	git fetch --depth 1 --force --prune origin tag $TAG
 	if ! git checkout -q $TAG; then
-		echo "Update failed. Did you modify something in `pwd`?"
+		echo "Update failed. Did you modify something in $(pwd)?"
 		exit 1
 	fi
 	echo

setup/dns.sh

@@ -62,7 +62,13 @@ for ip in $PRIVATE_IP $PRIVATE_IPV6; do
 	echo "  ip-address: $ip" >> /etc/nsd/nsd.conf;
 done
 
-echo "include: /etc/nsd/zones.conf" >> /etc/nsd/nsd.conf;
+# Create a directory for additional configuration directives, including
+# the zones.conf file written out by our management daemon.
+echo "include: /etc/nsd/nsd.conf.d/*.conf" >> /etc/nsd/nsd.conf;
+
+# Remove the old location of zones.conf that we generate. It will
+# now be stored in /etc/nsd/nsd.conf.d.
+rm -f /etc/nsd/zones.conf
 
 # Create DNSSEC signing keys.
 
@@ -132,7 +138,7 @@ cat > /etc/cron.daily/mailinabox-dnssec << EOF;
 #!/bin/bash
 # Mail-in-a-Box
 # Re-sign any DNS zones with DNSSEC because the signatures expire periodically.
-`pwd`/tools/dns_update
+$(pwd)/tools/dns_update
 EOF
 chmod +x /etc/cron.daily/mailinabox-dnssec
 

setup/firstuser.sh

@@ -1,5 +1,5 @@
 # If there aren't any mail users yet, create one.
-if [ -z "`management/cli.py user`" ]; then
+if [ -z "$(management/cli.py user)" ]; then
 	# The outut of "management/cli.py user" is a list of mail users. If there
 	# aren't any yet, it'll be empty.
 
@@ -10,7 +10,7 @@ if [ -z "`management/cli.py user`" ]; then
 			input_box "Mail Account" \
 				"Let's create your first mail account.
 				\n\nWhat email address do you want?" \
-				me@`get_default_hostname` \
+				me@$(get_default_hostname) \
 				EMAIL_ADDR
 
 			if [ -z "$EMAIL_ADDR" ]; then

setup/functions.sh

@@ -9,12 +9,12 @@ function hide_output {
 	# and returns a non-zero exit code.
 
 	# Get a temporary file.
-	OUTPUT=$(tempfile)
+	OUTPUT=$(mktemp)
 
 	# Execute command, redirecting stderr/stdout to the temporary file. Since we
 	# check the return code ourselves, disable 'set -e' temporarily.
 	set +e
-	$@ &> $OUTPUT
+	"$@" &> $OUTPUT
 	E=$?
 	set -e
 
@@ -22,7 +22,7 @@ function hide_output {
 	if [ $E != 0 ]; then
 		# Something failed.
 		echo
-		echo FAILED: $@
+		echo FAILED: "$@"
 		echo -----------------------------------------
 		cat $OUTPUT
 		echo -----------------------------------------
@@ -53,8 +53,7 @@ function apt_install {
 	# install' for all of the packages.  Calling `dpkg` on each package is slow,
 	# and doesn't affect what we actually do, except in the messages, so let's
 	# not do that anymore.
-	PACKAGES=$@
-	apt_get_quiet install $PACKAGES
+	apt_get_quiet install "$@"
 }
 
 function get_default_hostname {

setup/mail-dovecot.sh

@@ -45,8 +45,8 @@ apt_install \
 # - https://www.dovecot.org/list/dovecot/2012-August/137569.html
 # - https://www.dovecot.org/list/dovecot/2011-December/132455.html
 tools/editconf.py /etc/dovecot/conf.d/10-master.conf \
-	default_process_limit=$(echo "`nproc` * 250" | bc) \
-	default_vsz_limit=$(echo "`free -tm  | tail -1 | awk '{print $2}'` / 3" | bc)M \
+	default_process_limit=$(echo "$(nproc) * 250" | bc) \
+	default_vsz_limit=$(echo "$(free -tm  | tail -1 | awk '{print $2}') / 3" | bc)M \
 	log_path=/var/log/mail.log
 
 # The inotify `max_user_instances` default is 128, which constrains
@@ -183,6 +183,7 @@ plugin {
   sieve_after = $STORAGE_ROOT/mail/sieve/global_after
   sieve = $STORAGE_ROOT/mail/sieve/%d/%n.sieve
   sieve_dir = $STORAGE_ROOT/mail/sieve/%d/%n
+  sieve_redirect_envelope_from = recipient
 }
 EOF
 

setup/mail-postfix.sh

@@ -17,7 +17,7 @@
 # LMTP. Spamassassin then passes mail over to Dovecot for
 # storage in the user's mailbox.
 #
-# Postfix also listens on port 587 (SMTP+STARTLS) for
+# Postfix also listens on ports 465/587 (SMTPS, SMTP+STARTLS) for
 # connections from users who can authenticate and then sends
 # their email out to the outside world. Postfix queries Dovecot
 # to authenticate users.
@@ -71,7 +71,7 @@ tools/editconf.py /etc/postfix/main.cf \
 
 # ### Outgoing Mail
 
-# Enable the 'submission' port 587 smtpd server and tweak its settings.
+# Enable the 'submission' ports 465 and 587 and tweak their settings.
 #
 # * Enable authentication. It's disabled globally so that it is disabled on port 25,
 #   so we need to explicitly enable it here.
@@ -80,13 +80,19 @@ tools/editconf.py /etc/postfix/main.cf \
 #   OpenDKIM milter only. See dkim.sh.
 # * Even though we dont allow auth over non-TLS connections (smtpd_tls_auth_only below, and without auth the client cant
 #   send outbound mail), don't allow non-TLS mail submission on this port anyway to prevent accidental misconfiguration.
-#   Setting smtpd_tls_security_level=encrypt also triggers the use of the 'mandatory' settings below.
+#   Setting smtpd_tls_security_level=encrypt also triggers the use of the 'mandatory' settings below (but this is ignored with smtpd_tls_wrappermode=yes.)
 # * Give it a different name in syslog to distinguish it from the port 25 smtpd server.
 # * Add a new cleanup service specific to the submission service ('authclean')
 #   that filters out privacy-sensitive headers on mail being sent out by
 #   authenticated users.  By default Postfix also applies this to attached
 #   emails but we turn this off by setting nested_header_checks empty.
 tools/editconf.py /etc/postfix/master.cf -s -w \
+	"smtps=inet n       -       -       -       -       smtpd
+	  -o smtpd_tls_wrappermode=yes
+	  -o smtpd_sasl_auth_enable=yes
+	  -o syslog_name=postfix/submission
+	  -o smtpd_milters=inet:127.0.0.1:8891
+	  -o cleanup_service_name=authclean" \
 	"submission=inet n       -       -       -       -       smtpd
 	  -o smtpd_sasl_auth_enable=yes
 	  -o syslog_name=postfix/submission
@@ -107,7 +113,7 @@ sed -i "s/PRIMARY_HOSTNAME/$PRIMARY_HOSTNAME/" /etc/postfix/outgoing_mail_header
 sed -i "s/PUBLIC_IP/$PUBLIC_IP/" /etc/postfix/outgoing_mail_header_filters
 
 # Enable TLS on incoming connections. It is not required on port 25, allowing for opportunistic
-# encryption. On port 587 it is mandatory (see above). Shared and non-shared settings are
+# encryption. On ports 465 and 587 it is mandatory (see above). Shared and non-shared settings are
 # given here. Shared settings include:
 # * Require TLS before a user is allowed to authenticate.
 # * Set the path to the server TLS certificate and 2048-bit DH parameters for old DH ciphers.
@@ -117,9 +123,6 @@ sed -i "s/PUBLIC_IP/$PUBLIC_IP/" /etc/postfix/outgoing_mail_header_filters
 #   won't fall back to cleartext. So we don't disable too much. smtpd_tls_exclude_ciphers applies to
 #   both port 25 and port 587, but because we override the cipher list for both, it probably isn't used.
 #   Use Mozilla's "Old" recommendations at https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=old&openssl-version=1.1.1
-# For port 587 (via the 'mandatory' settings):
-# * Use Mozilla's "Intermediate" TLS recommendations from https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=intermediate&openssl-version=1.1.1
-#   using and overriding the "high" cipher list so we don't conflict with the more permissive settings for port 25.
 tools/editconf.py /etc/postfix/main.cf \
 	smtpd_tls_security_level=may\
 	smtpd_tls_auth_only=yes \
@@ -130,18 +133,23 @@ tools/editconf.py /etc/postfix/main.cf \
 	smtpd_tls_ciphers=medium \
 	tls_medium_cipherlist=ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA \
 	smtpd_tls_exclude_ciphers=aNULL,RC4 \
+	tls_preempt_cipherlist=no \
+	smtpd_tls_received_header=yes
+
+# For ports 465/587 (via the 'mandatory' settings):
+# * Use Mozilla's "Intermediate" TLS recommendations from https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=intermediate&openssl-version=1.1.1
+#   using and overriding the "high" cipher list so we don't conflict with the more permissive settings for port 25.
+tools/editconf.py /etc/postfix/main.cf \
 	smtpd_tls_mandatory_protocols="!SSLv2,!SSLv3,!TLSv1,!TLSv1.1" \
 	smtpd_tls_mandatory_ciphers=high \
 	tls_high_cipherlist=ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 \
-	smtpd_tls_mandatory_exclude_ciphers=aNULL,DES,3DES,MD5,DES+MD5,RC4 \
-	tls_preempt_cipherlist=no \
-	smtpd_tls_received_header=yes
+	smtpd_tls_mandatory_exclude_ciphers=aNULL,DES,3DES,MD5,DES+MD5,RC4
 
 # Prevent non-authenticated users from sending mail that requires being
 # relayed elsewhere. We don't want to be an "open relay". On outbound
 # mail, require one of:
 #
-# * `permit_sasl_authenticated`: Authenticated users (i.e. on port 587).
+# * `permit_sasl_authenticated`: Authenticated users (i.e. on port 465/587).
 # * `permit_mynetworks`: Mail that originates locally.
 # * `reject_unauth_destination`: No one else. (Permits mail whose destination is local and rejects other mail.)
 tools/editconf.py /etc/postfix/main.cf \
@@ -191,7 +199,7 @@ tools/editconf.py /etc/postfix/main.cf \
 #
 # In a basic setup we would pass mail directly to Dovecot by setting
 # virtual_transport to `lmtp:unix:private/dovecot-lmtp`.
-tools/editconf.py /etc/postfix/main.cf virtual_transport=lmtp:[127.0.0.1]:10025
+tools/editconf.py /etc/postfix/main.cf "virtual_transport=lmtp:[127.0.0.1]:10025"
 # Because of a spampd bug, limit the number of recipients in each connection.
 # See https://github.com/mail-in-a-box/mailinabox/issues/1523.
 tools/editconf.py /etc/postfix/main.cf lmtp_destination_recipient_limit=1
@@ -263,6 +271,7 @@ tools/editconf.py /etc/postfix/main.cf \
 # Allow the two SMTP ports in the firewall.
 
 ufw_allow smtp
+ufw_allow smtps
 ufw_allow submission
 
 # Restart services

setup/mail-users.sh

@@ -23,6 +23,7 @@ if [ ! -f $db_path ]; then
 	echo "CREATE TABLE users (id INTEGER PRIMARY KEY AUTOINCREMENT, email TEXT NOT NULL UNIQUE, password TEXT NOT NULL, extra, privileges TEXT NOT NULL DEFAULT '');" | sqlite3 $db_path;
 	echo "CREATE TABLE aliases (id INTEGER PRIMARY KEY AUTOINCREMENT, source TEXT NOT NULL UNIQUE, destination TEXT NOT NULL, permitted_senders TEXT);" | sqlite3 $db_path;
 	echo "CREATE TABLE mfa (id INTEGER PRIMARY KEY AUTOINCREMENT, user_id INTEGER NOT NULL, type TEXT NOT NULL, secret TEXT NOT NULL, mru_token TEXT, label TEXT, FOREIGN KEY (user_id) REFERENCES users(id) ON DELETE CASCADE);" | sqlite3 $db_path;
+	echo "CREATE TABLE auto_aliases (id INTEGER PRIMARY KEY AUTOINCREMENT, source TEXT NOT NULL UNIQUE, destination TEXT NOT NULL, permitted_senders TEXT);" | sqlite3 $db_path;
 fi
 
 # ### User Authentication
@@ -100,8 +101,12 @@ EOF
 # ### Destination Validation
 
 # Use a Sqlite3 database to check whether a destination email address exists,
-# and to perform any email alias rewrites in Postfix.
+# and to perform any email alias rewrites in Postfix. Additionally, we disable
+# SMTPUTF8 because Dovecot's LMTP server that delivers mail to inboxes does
+# not support it, and if a message is received with the SMTPUTF8 flag it will
+# bounce.
 tools/editconf.py /etc/postfix/main.cf \
+	smtputf8_enable=no \
 	virtual_mailbox_domains=sqlite:/etc/postfix/virtual-mailbox-domains.cf \
 	virtual_mailbox_maps=sqlite:/etc/postfix/virtual-mailbox-maps.cf \
 	virtual_alias_maps=sqlite:/etc/postfix/virtual-alias-maps.cf \
@@ -110,7 +115,7 @@ tools/editconf.py /etc/postfix/main.cf \
 # SQL statement to check if we handle incoming mail for a domain, either for users or aliases.
 cat > /etc/postfix/virtual-mailbox-domains.cf << EOF;
 dbpath=$db_path
-query = SELECT 1 FROM users WHERE email LIKE '%%@%s' UNION SELECT 1 FROM aliases WHERE source LIKE '%%@%s'
+query = SELECT 1 FROM users WHERE email LIKE '%%@%s' UNION SELECT 1 FROM aliases WHERE source LIKE '%%@%s' UNION SELECT 1 FROM auto_aliases WHERE source LIKE '%%@%s'
 EOF
 
 # SQL statement to check if we handle incoming mail for a user.
@@ -145,7 +150,7 @@ EOF
 # empty destination here so that other lower priority rules might match.
 cat > /etc/postfix/virtual-alias-maps.cf << EOF;
 dbpath=$db_path
-query = SELECT destination from (SELECT destination, 0 as priority FROM aliases WHERE source='%s' AND destination<>'' UNION SELECT email as destination, 1 as priority FROM users WHERE email='%s') ORDER BY priority LIMIT 1;
+query = SELECT destination from (SELECT destination, 0 as priority FROM aliases WHERE source='%s' AND destination<>'' UNION SELECT email as destination, 1 as priority FROM users WHERE email='%s' UNION SELECT destination, 2 as priority FROM auto_aliases WHERE source='%s' AND destination<>'') ORDER BY priority LIMIT 1;
 EOF
 
 # Restart Services

setup/management.sh

@@ -49,7 +49,7 @@ hide_output $venv/bin/pip install --upgrade pip
 # NOTE: email_validator is repeated in setup/questions.sh, so please keep the versions synced.
 hide_output $venv/bin/pip install --upgrade \
 	rtyaml "email_validator>=1.0.0" "exclusiveprocess" \
-	flask dnspython python-dateutil \
+	flask dnspython python-dateutil expiringdict \
 	qrcode[pil] pyotp \
 	"idna>=2.0.0" "cryptography==2.2.2" boto psutil postfix-mta-sts-resolver b2sdk
 
@@ -97,7 +97,7 @@ export LANG=en_US.UTF-8
 export LC_TYPE=en_US.UTF-8
 
 source $venv/bin/activate
-exec python `pwd`/management/daemon.py
+exec python $(pwd)/management/daemon.py
 EOF
 chmod +x $inst_dir/start
 cp --remove-destination conf/mailinabox.service /lib/systemd/system/mailinabox.service # target was previously a symlink so remove it first
@@ -112,7 +112,7 @@ minute=$((RANDOM % 60))  # avoid overloading mailinabox.email
 cat > /etc/cron.d/mailinabox-nightly << EOF;
 # Mail-in-a-Box --- Do not edit / will be overwritten on update.
 # Run nightly tasks: backup, status checks.
-$minute 3 * * *	root	(cd `pwd` && management/daily_tasks.sh)
+$minute 3 * * *	root	(cd $(pwd) && management/daily_tasks.sh)
 EOF
 
 # Start the management server.

setup/migrate.py

@@ -186,6 +186,11 @@ def migration_13(env):
 	db = os.path.join(env["STORAGE_ROOT"], 'mail/users.sqlite')
 	shell("check_call", ["sqlite3", db, "CREATE TABLE mfa (id INTEGER PRIMARY KEY AUTOINCREMENT, user_id INTEGER NOT NULL, type TEXT NOT NULL, secret TEXT NOT NULL, mru_token TEXT, label TEXT, FOREIGN KEY (user_id) REFERENCES users(id) ON DELETE CASCADE);"])
 
+def migration_14(env):
+	# Add the "auto_aliases" table.
+	db = os.path.join(env["STORAGE_ROOT"], 'mail/users.sqlite')
+	shell("check_call", ["sqlite3", db, "CREATE TABLE auto_aliases (id INTEGER PRIMARY KEY AUTOINCREMENT, source TEXT NOT NULL UNIQUE, destination TEXT NOT NULL, permitted_senders TEXT);"])
+
 ###########################################################
 
 def get_current_migration():

setup/nextcloud.sh

@@ -97,12 +97,12 @@ InstallNextcloud() {
 }
 
 # Nextcloud Version to install. Checks are done down below to step through intermediate versions.
-nextcloud_ver=20.0.1
-nextcloud_hash=f2b3faa570c541df73f209e873a1c2852e79eab8
-contacts_ver=3.4.1
-contacts_hash=aee680a75e95f26d9285efd3c1e25cf7f3bfd27e
-calendar_ver=2.1.2
-calendar_hash=930c07863bb7a65652dec34793802c8d80502336
+nextcloud_ver=20.0.8
+nextcloud_hash=372b0b4bb07c7984c04917aff86b280e68fbe761
+contacts_ver=3.5.1
+contacts_hash=d2ffbccd3ed89fa41da20a1dff149504c3b33b93
+calendar_ver=2.2.0
+calendar_hash=673ad72ca28adb8d0f209015ff2dca52ffad99af
 user_external_ver=1.0.0
 user_external_hash=3bf2609061d7214e7f0f69dd8883e55c4ec8f50a
 
@@ -128,7 +128,7 @@ if [ ! -d /usr/local/lib/owncloud/ ] || [[ ! ${CURRENT_NEXTCLOUD_VER} =~ ^$nextc
 
 	# Backup the existing ownCloud/Nextcloud.
 	# Create a backup directory to store the current installation and database to
-	BACKUP_DIRECTORY=$STORAGE_ROOT/owncloud-backup/`date +"%Y-%m-%d-%T"`
+	BACKUP_DIRECTORY=$STORAGE_ROOT/owncloud-backup/$(date +"%Y-%m-%d-%T")
 	mkdir -p "$BACKUP_DIRECTORY"
 	if [ -d /usr/local/lib/owncloud/ ]; then
 		echo "Upgrading Nextcloud --- backing up existing installation, configuration, and database to directory to $BACKUP_DIRECTORY..."
@@ -312,7 +312,9 @@ sudo -u www-data php /usr/local/lib/owncloud/occ upgrade
 if [ \( $? -ne 0 \) -a \( $? -ne 3 \) ]; then exit 1; fi
 
 # Disable default apps that we don't support
-sudo -u www-data php /usr/local/lib/owncloud/occ app:disable photos dashboard activity
+sudo -u www-data \
+	php /usr/local/lib/owncloud/occ app:disable photos dashboard activity \
+	| (grep -v "No such app enabled" || /bin/true)
 
 # Set PHP FPM values to support large file uploads
 # (semicolon is the comment character in this file, hashes produce deprecation warnings)

setup/preflight.sh

@@ -8,7 +8,7 @@ if [[ $EUID -ne 0 ]]; then
 fi
 
 # Check that we are running on Ubuntu 18.04 LTS (or 18.04.xx).
-if [ "`lsb_release -d | sed 's/.*:\s*//' | sed 's/18\.04\.[0-9]/18.04/' `" != "Ubuntu 18.04 LTS" ]; then
+if [ "$(lsb_release -d | sed 's/.*:\s*//' | sed 's/18\.04\.[0-9]/18.04/' )" != "Ubuntu 18.04 LTS" ]; then
 	echo "Mail-in-a-Box only supports being installed on Ubuntu 18.04, sorry. You are running:"
 	echo
 	lsb_release -d | sed 's/.*:\s*//'

setup/ssl.sh

@@ -10,7 +10,7 @@
 #
 #  * DNSSEC DANE TLSA records
 #  * IMAP
-#  * SMTP (opportunistic TLS for port 25 and submission on port 587)
+#  * SMTP (opportunistic TLS for port 25 and submission on ports 465/587)
 #  * HTTPS
 #
 # The certificate is created with its CN set to the PRIMARY_HOSTNAME. It is

setup/start.sh

@@ -46,7 +46,7 @@ fi
 # in the first dialog prompt, so we should do this before that starts.
 cat > /usr/local/bin/mailinabox << EOF;
 #!/bin/bash
-cd `pwd`
+cd $(pwd)
 source setup/start.sh
 EOF
 chmod +x /usr/local/bin/mailinabox
@@ -78,7 +78,7 @@ if [ ! -d $STORAGE_ROOT ]; then
 	mkdir -p $STORAGE_ROOT
 fi
 if [ ! -f $STORAGE_ROOT/mailinabox.version ]; then
-	echo $(setup/migrate.py --current) > $STORAGE_ROOT/mailinabox.version
+	setup/migrate.py --current > $STORAGE_ROOT/mailinabox.version
 	chown $STORAGE_USER.$STORAGE_USER $STORAGE_ROOT/mailinabox.version
 fi
 
@@ -94,7 +94,7 @@ PUBLIC_IP=$PUBLIC_IP
 PUBLIC_IPV6=$PUBLIC_IPV6
 PRIVATE_IP=$PRIVATE_IP
 PRIVATE_IPV6=$PRIVATE_IPV6
-MTA_STS_MODE=${MTA_STS_MODE-}
+MTA_STS_MODE=${DEFAULT_MTA_STS_MODE:-enforce}
 TTL=${DEFAULT_TTL:-86400}
 EOF
 

setup/web.sh

@@ -126,13 +126,13 @@ chmod a+r /var/lib/mailinabox/mozilla-autoconfig.xml
 # nginx configuration at /.well-known/mta-sts.txt
 # more documentation is available on: 
 # https://www.uriports.com/blog/mta-sts-explained/
-# default mode is "enforce". Change to "testing" which means
-# "Messages will be delivered as though there was no failure
-# but a report will be sent if TLS-RPT is configured" if you
-# are not sure you want this yet. Or "none".
+# default mode is "enforce". In /etc/mailinabox.conf change
+# "MTA_STS_MODE=testing" which means "Messages will be delivered
+# as though there was no failure but a report will be sent if
+# TLS-RPT is configured" if you are not sure you want this yet. Or "none".
 PUNY_PRIMARY_HOSTNAME=$(echo "$PRIMARY_HOSTNAME" | idn2)
 cat conf/mta-sts.txt \
-        | sed "s/MODE/${MTA_STS_MODE:-enforce}/" \
+        | sed "s/MODE/${MTA_STS_MODE}/" \
         | sed "s/PRIMARY_HOSTNAME/$PUNY_PRIMARY_HOSTNAME/" \
          > /var/lib/mailinabox/mta-sts.txt
 chmod a+r /var/lib/mailinabox/mta-sts.txt

setup/webmail.sh

@@ -29,8 +29,8 @@ apt_install \
 # Combine the Roundcube version number with the commit hash of plugins to track
 # whether we have the latest version of everything.
 
-VERSION=1.4.11
-HASH=3877f0e70f29e7d0612155632e48c3db1e626be3
+VERSION=1.5-rc
+HASH=a7cb2a39702536d769c7ff93f716e27f0b93f9d9
 PERSISTENT_LOGIN_VERSION=6b3fc450cae23ccb2f393d0ef67aa319e877e435 # version 5.2.0
 HTML5_NOTIFIER_VERSION=68d9ca194212e15b3c7225eb6085dbcf02fd13d7 # version 0.6.4+
 CARDDAV_VERSION=3.0.3
@@ -47,7 +47,7 @@ needs_update=0 #NODOC
 if [ ! -f /usr/local/lib/roundcubemail/version ]; then
 	# not installed yet #NODOC
 	needs_update=1 #NODOC
-elif [[ "$UPDATE_KEY" != `cat /usr/local/lib/roundcubemail/version` ]]; then
+elif [[ "$UPDATE_KEY" != $(cat /usr/local/lib/roundcubemail/version) ]]; then
 	# checks if the version is what we want
 	needs_update=1 #NODOC
 fi
@@ -91,8 +91,9 @@ fi
 
 # ### Configuring Roundcube
 
-# Generate a safe 24-character secret key of safe characters.
-SECRET_KEY=$(dd if=/dev/urandom bs=1 count=18 2>/dev/null | base64 | fold -w 24 | head -n 1)
+# Generate a secret key of PHP-string-safe characters appropriate
+# for the cipher algorithm selected below.
+SECRET_KEY=$(dd if=/dev/urandom bs=1 count=32 2>/dev/null | base64 | sed s/=//g)
 
 # Create a configuration file.
 #
@@ -126,10 +127,12 @@ cat > $RCM_CONFIG <<EOF;
  );
 \$config['support_url'] = 'https://mailinabox.email/';
 \$config['product_name'] = '$PRIMARY_HOSTNAME Webmail';
-\$config['des_key'] = '$SECRET_KEY';
+\$config['cipher_method'] = 'AES-256-CBC'; # persistent login cookie and potentially other things
+\$config['des_key'] = '$SECRET_KEY'; # 37 characters -> ~256 bits for AES-256, see above
 \$config['plugins'] = array('html5_notifier', 'archive', 'zipdownload', 'password', 'managesieve', 'jqueryui', 'persistent_login', 'carddav');
 \$config['skin'] = 'elastic';
 \$config['login_autocomplete'] = 2;
+\$config['login_username_filter'] = 'email';
 \$config['password_charset'] = 'UTF-8';
 \$config['junk_mbox'] = 'Spam';
 ?>

setup/zpush.sh

@@ -23,22 +23,22 @@ phpenmod -v php imap
 
 # Copy Z-Push into place.
 VERSION=2.6.2
-TARGETHASH=4b312d64227ef887b24d9cc8f0ae17519586f6e2
+TARGETHASH=f0e8091a8030e5b851f5ba1f9f0e1a05b8762d80
 needs_update=0 #NODOC
 if [ ! -f /usr/local/lib/z-push/version ]; then
 	needs_update=1 #NODOC
-elif [[ $VERSION != `cat /usr/local/lib/z-push/version` ]]; then
+elif [[ $VERSION != $(cat /usr/local/lib/z-push/version) ]]; then
 	# checks if the version
 	needs_update=1 #NODOC
 fi
 if [ $needs_update == 1 ]; then
 	# Download
-	wget_verify "https://stash.z-hub.io/rest/api/latest/projects/ZP/repos/z-push/archive?at=refs%2Ftags%2F$VERSION&format=zip" $TARGETHASH /tmp/z-push.zip
+	wget_verify "https://github.com/Z-Hub/Z-Push/archive/refs/tags/$VERSION.zip" $TARGETHASH /tmp/z-push.zip
 
 	# Extract into place.
 	rm -rf /usr/local/lib/z-push /tmp/z-push
 	unzip -q /tmp/z-push.zip -d /tmp/z-push
-	mv /tmp/z-push/src /usr/local/lib/z-push
+	mv /tmp/z-push/*/src /usr/local/lib/z-push
 	rm -rf /tmp/z-push.zip /tmp/z-push
 
 	rm -f /usr/sbin/z-push-{admin,top}

tests/fail2ban.py

@@ -232,7 +232,7 @@ if __name__ == "__main__":
 	run_test(managesieve_test, [], 20, 30, 4)
 
 	# Mail-in-a-Box control panel
-	run_test(http_test, ["/admin/me", 200], 20, 30, 1)
+	run_test(http_test, ["/admin/login", 200], 20, 30, 1)
 
 	# Munin via the Mail-in-a-Box control panel
 	run_test(http_test, ["/admin/munin/", 401], 20, 30, 1)

tests/test_mail.py

@@ -41,9 +41,8 @@ This is a test message. It should be automatically deleted by the test script.""
 	)
 
 # Connect to the server on the SMTP submission TLS port.
-server = smtplib.SMTP(host, 587)
+server = smtplib.SMTP_SSL(host)
 #server.set_debuglevel(1)
-server.starttls()
 
 # Verify that the EHLO name matches the server's reverse DNS.
 ipaddr = socket.gethostbyname(host) # IPv4 only!