Run the tests with cgo off and without the race detector (closes #538)

sneak ruled the race detector out
(#538 (comment)), and on
Linux it was the only reason the tests needed cgo. The test phase and the
browser test binary now build with CGO_ENABLED=0 and without -race, so no
test binary compiles mattn's C SQLite. The test phase keeps the builder
stage's Debian Go image. Its comments, the README and the code comments that
said the suite runs under -race now say what is true, and the README notes
the exception to the vendored REPO_POLICIES.md.

Model: opus-5-5

.dockerignore

@@ -72,8 +72,10 @@
 **/*.sublime-*
 
 # This repository's own host-built artifacts: the binary `make build`
-# writes.
+# writes, and the Alpine.js file `make assets` extracts from 3p/ (the
+# build extracts its own).
 /bin
+/static/js/alpine.min.js
 
 # SQLite databases, which hold the session key and webhook payloads, at
 # any depth.

.gitignore

@@ -77,3 +77,7 @@ data/
 # Temporary files
 tmp/
 temp/
+
+# Alpine.js, extracted by `make assets` from its tarball in 3p/, which is
+# what is committed.
+/static/js/alpine.min.js

.prettierignore

@@ -1,3 +1,2 @@
 node_modules/
 yarn.lock
-static/js/alpine.min.js

Dockerfile

@@ -92,6 +92,10 @@ COPY . .
 # fmt-check` is the markdown-check stage above.
 RUN if [ -n "$(gofmt -s -l .)" ]; then echo "gofmt needed on:"; gofmt -s -l .; exit 1; fi
 
+# static/static.go embeds the Alpine.js file this extracts from 3p/; without
+# it the static package does not compile and cannot be linted.
+RUN script/assets
+
 # The golangci-lint steps run with --network=none. `golangci-lint config
 # verify` is documented as fetching its JSON schema over HTTPS; this pinned
 # image resolves the schema without any network, and --network=none enforces
@@ -126,6 +130,9 @@ RUN go mod download
 
 COPY . .
 
+# static/static.go embeds the Alpine.js file this extracts from 3p/.
+RUN script/assets
+
 # -timeout applies to each package on its own, so 90s has only to clear the
 # slowest one. -p 4 -parallel 8 keep the run under 2 GB of memory: at most
 # four test binaries build or run at once, each with at most eight parallel
@@ -204,8 +211,10 @@ RUN version="$(make version VERSION="$VERSION")"; \
         esac; \
     fi
 
-# The Makefile's build target builds with cgo off, so the binary is
-# statically linked and runs on the Alpine runtime image below.
+# Builds through the Makefile's build target, which runs script/assets
+# (Alpine.js, extracted from its tarball in 3p/) first. The target builds
+# with cgo off, so the binary is statically linked and runs on the Alpine
+# runtime image below as it is.
 RUN make build VERSION="$VERSION"
 
 # Runtime stage

Dockerfile.browser

@@ -17,7 +17,7 @@ COPY . .
 # The test binary embeds the templates and static files, so the browser
 # stage needs nothing else. It is built with cgo off and -p 4 keeps the
 # compile's memory down, both as in the test phase of Dockerfile.
-RUN CGO_ENABLED=0 go test -c -p 4 -tags browser -o /browser.test ./internal/server
+RUN make assets && CGO_ENABLED=0 go test -c -p 4 -tags browser -o /browser.test ./internal/server
 
 # chromedp/headless-shell:151.0.7922.109 (Debian trixie), 2026-08-11. The
 # browser is on PATH as headless-shell, where the test's browser library

Makefile

@@ -1,4 +1,4 @@
-.PHONY: bootstrap setup test test-browser lint fmt fmt-check check build run dev deps docker clean hooks css css-check version
+.PHONY: bootstrap setup assets test test-browser lint fmt fmt-check check build run dev deps docker clean hooks css css-check version
 
 # Default target
 .DEFAULT_GOAL := check
@@ -22,6 +22,9 @@ bootstrap:
 setup:
 	@script/setup
 
+assets:
+	@script/assets
+
 test:
 	@script/test
 
@@ -44,13 +47,13 @@ check:
 # REPO_POLICIES.md does: the binary carries no build paths, symbol table or
 # debug information, and on Linux, the image's included, it is statically
 # linked.
-build:
+build: assets
 	CGO_ENABLED=0 go build -trimpath -ldflags '-s -w -X main.version=$(VERSION)' -o bin/webhooker ./cmd/webhooker
 
 run: build
 	./bin/webhooker
 
-dev:
+dev: assets
 	go run ./cmd/webhooker
 
 deps:

TODO.md

@@ -1,77 +1,72 @@
 # Workflow
 
-One issue per unit of work, and one branch and one PR per issue:
+One issue per unit of work, one branch and one PR per issue:
 
-- make sure a tracked issue exists with a definition of done
-- branch from `next`, never from `main`
-- do the work and push the branch
-- open a PR with base `next`, never `main`
-- pass an independent review
-- the repository manager squash-merges it into `next`
+- ensure a tracked issue exists with a definition of done
+- branch from `next` (never from `main`)
+- do the work; open a PR based on `next` (never on `main`)
+- pass an independent review, then the manager squash-merges into `next`
+- push; nothing stays local-only
 
-The repository manager is the role that merges each issue's PR into `next`.
-Nothing stays local-only: every commit is pushed.
+`next` is the branch for the next milestone and must stay green and mergeable to
+`main` without notice. One `next` -> `main` PR accumulates the milestone;
+releases are cut from `main` separately.
 
-`next` is the branch for the next milestone. It must stay green and mergeable
-into `main` at all times. A milestone's work reaches `main` through one PR from
-`next`. The owner, @sneak, merges that PR. Cutting a release from `main` is a
-separate step after that.
-
-The tracker (https://git.eeqj.de/sneak/webhooker/issues) records what is done
-and what is under way. This file keeps no list of either.
+The tracker (https://git.eeqj.de/sneak/webhooker/issues) is the record of what
+is done and what is under way. This file keeps no list of either.
 
 # Status
 
 What is still open for 1.0.0 is in its milestone
-(https://git.eeqj.de/sneak/webhooker/milestone/9). `v1.0.0` is not tagged. Only
-@sneak tags it.
+(https://git.eeqj.de/sneak/webhooker/milestone/9). `v1.0.0` is not tagged, and
+only @sneak tags it.
 
-Delivery is at least once by design. When webhooker cannot record the outcome of
-a delivery, it sends that delivery again. The target can then receive the same
-event twice. The alternative is a lost delivery that nothing reports. The README
-says so. Such a duplicate is not a defect to re-file.
+Delivery is at-least-once by design, not by accident: a send whose result row
+does not land is attempted again, so a receiver can see a duplicate. That is
+deliberate — the alternative is a silent lost delivery — and the README says so
+under Rationale. It is not a defect to re-file.
 
 # Next Step
 
 @sneak runs webhooker in limited production, then tags `v1.0.0`. Merging `next`
-into `main` is a separate act. It waits on neither the production run nor the
-tag.
+into `main` is a separate act from tagging and waits on neither of those: `next`
+is kept mergeable at all times, which is the point of the branch.
 
 # Future Steps
 
-- Per-webhook rate limits, set in the web UI and enforced at the entrypoint.
-  Today `RECEIVER_RATE_LIMIT` is the only rate-limit setting. It is how many
-  requests per minute one client address may send to one entrypoint. The same
-  address is also capped at ten times that across all entrypoints together.
-- API key authentication for programmatic access. The `APIKey` model and its
-  `api_keys` table exist. Nothing creates a key and nothing checks one.
-- REST API v1. `/api/v1` is mounted with no routes today.
-    - CRUD for webhooks, entrypoints and targets
+- Per-webhook rate limits, set in the web UI and enforced in the receiver
+  handler, on top of the receiver's existing limits, which `RECEIVER_RATE_LIMIT`
+  sets for the whole server (see Rate Limiting in the README)
+- API key authentication for programmatic access (the `APIKey` model exists, but
+  nothing creates a key and no middleware checks one)
+- REST API v1
+    - CRUD for webhooks, entrypoints, targets
     - event viewing and filtering endpoints
     - event redelivery endpoint
     - OpenAPI specification
 - Analytics in the web UI: response times summarised per webhook or per target,
-  and figures for all webhooks together. Today the webhook page shows event,
-  delivery and failure counts and failure percentages. The target list counts
-  each target's deliveries. The event log shows every attempt's duration.
-  `/metrics` carries server-wide counts and delivery durations.
-- A remember-me option at login. Today every session survives a browser restart.
-  It lasts up to 7 days. It ends sooner after `SESSION_IDLE_TIMEOUT` (default 24
-  hours) without use.
-- Password reset over the web for a forgotten password. Today a signed-in user
-  can change their password. A lost password is reset from the command line with
-  `webhooker resetpw` (https://git.eeqj.de/sneak/webhooker/issues/208).
+  and figures for all webhooks together. The webhook page already shows event,
+  delivery and failure counts and failure percentages, the target list counts
+  each target's deliveries, the event log and each event's page show every
+  attempt's duration, and `/metrics` carries server-wide counts and delivery
+  durations
+- A remember-me option at login. Every session already survives a browser
+  restart: it lasts up to 7 days, and ends sooner after `SESSION_IDLE_TIMEOUT`
+  (default 24 hours) without activity
+- Password reset flow for a forgotten password over the web. The authenticated
+  password _change_ flow already landed, and a lost password is recoverable from
+  the console with `webhooker resetpw`
+  (https://git.eeqj.de/sneak/webhooker/issues/208)
 - Later, nice to have
     - email delivery target type
     - SNS and S3 delivery targets
-    - data transformations, such as a configurable Slack message format. The
-      Slack target sends one fixed format today.
-    - JSONL file delivery with periodic S3 upload. Today an archive target
-      writes events to SQLite files. An archive target can rotate those files
-      hourly, daily or monthly. The webhook page offers them as one gzipped JSON
-      download.
+    - data transformations (e.g. a configurable Slack message format; the Slack
+      target sends one fixed format today)
+    - JSONL file delivery with periodic S3 upload (the `database` target already
+      archives events to SQLite files, rotated hourly, daily or monthly if set,
+      and the webhook page offers them as one gzipped JSON download)
     - webhook event search, and filtering beyond the event log's failed and
       pending views
-    - multi-user with role-based access control. Today each webhook belongs to
-      one account. Only the account made at first boot exists. There is no way
-      to add another.
+    - multi-user with role-based access control (each webhook already belongs to
+      one account, but there is only the account made at first boot and no way
+      to add another)

eslint.config.mjs

@@ -5,7 +5,7 @@
 // REPO_POLICIES.md states that a linter can check: const for everything,
 // let only for a variable that is reassigned, never var.
 export default [
-    // Alpine.js, committed as published; not ours to lint.
+    // Alpine.js, extracted from 3p/ by make assets; not ours to lint.
     { ignores: ["static/js/alpine.min.js"] },
     {
         // The pages load static/js/app.js as a classic script, not a module.

internal/handlers/export_test.go

@@ -96,12 +96,6 @@ func (s *Handlers) WebhookStatsForTest(webhookID string) *WebhookStats {
 	return s.loadWebhookStats(webhookID, entrypoints, targets)
 }
 
-// RelativeTimeForTest exposes relativeTime for use in the
-// handlers_test package.
-func RelativeTimeForTest(at, now time.Time) string {
-	return relativeTime(at, now)
-}
-
 // FinishedByTargetForTest exposes finishedByTarget for use in the
 // handlers_test package.
 func FinishedByTargetForTest(

internal/handlers/webhook_stats.go

@@ -15,9 +15,6 @@ const (
 	longWindow  = 24 * time.Hour
 )
 
-// day is the largest unit relativeTime writes.
-const day = 24 * time.Hour
-
 // percent turns a fraction into a percentage.
 const percent = 100
 
@@ -38,12 +35,8 @@ type WebhookStats struct {
 	InProgress int64
 
 	// LastEventAt is when the newest event arrived, or nil when none
-	// has. Retention does not change it. LastEvent is how long ago
-	// that was, as relativeTime writes it, and LastEventUTC the full
-	// time; both are empty when no event has arrived.
-	LastEventAt  *time.Time
-	LastEvent    string
-	LastEventUTC string
+	// has. Retention does not change it.
+	LastEventAt *time.Time
 
 	Last10Minutes RecentWindow
 	Last24Hours   RecentWindow
@@ -88,42 +81,6 @@ func (w RecentWindow) FailurePercent() string {
 	)
 }
 
-// relativeTime is how long before now the time at was, in whole
-// seconds, written as its two largest units out of d, h, m and s:
-// "59s", "1m1s", "23h59m", "3d4h". A second unit of zero is left off,
-// as in "5m". A time after now is "0s".
-func relativeTime(at, now time.Time) string {
-	elapsed := max(now.Sub(at), 0)
-
-	days := int64(elapsed / day)
-	hours := int64(elapsed % day / time.Hour)
-	minutes := int64(elapsed % time.Hour / time.Minute)
-	seconds := int64(elapsed % time.Minute / time.Second)
-
-	switch {
-	case days > 0:
-		return twoUnits(days, "d", hours, "h")
-	case hours > 0:
-		return twoUnits(hours, "h", minutes, "m")
-	case minutes > 0:
-		return twoUnits(minutes, "m", seconds, "s")
-	default:
-		return fmt.Sprintf("%ds", seconds)
-	}
-}
-
-// twoUnits writes a count of a larger unit followed by a count of the
-// next smaller one, leaving the smaller off when it is zero.
-func twoUnits(
-	larger int64, largerUnit string, smaller int64, smallerUnit string,
-) string {
-	if smaller == 0 {
-		return fmt.Sprintf("%d%s", larger, largerUnit)
-	}
-
-	return fmt.Sprintf("%d%s%d%s", larger, largerUnit, smaller, smallerUnit)
-}
-
 // loadWebhookStats gathers the figures for the statistics pane from the
 // webhook's entrypoints and targets, as the page has already loaded
 // them, and from its event database. It returns nil, and logs why, when
@@ -182,7 +139,7 @@ func (h *Handlers) loadWebhookStats(
 func readEventStats(
 	db *gorm.DB, now time.Time, stats *WebhookStats,
 ) error {
-	err := readTotals(db, now, stats)
+	err := readTotals(db, stats)
 	if err != nil {
 		return err
 	}
@@ -212,9 +169,9 @@ func readEventStats(
 }
 
 // readTotals fills in the lifetime and within-retention figures, and
-// when the last event arrived and how long before now that was, from
-// the running totals: the events' row, and the targets' rows summed.
-func readTotals(db *gorm.DB, now time.Time, stats *WebhookStats) error {
+// when the last event arrived, from the running totals: the events'
+// row, and the targets' rows summed.
+func readTotals(db *gorm.DB, stats *WebhookStats) error {
 	var events database.EventTotals
 
 	err := db.Take(&events).Error
@@ -233,12 +190,6 @@ func readTotals(db *gorm.DB, now time.Time, stats *WebhookStats) error {
 	stats.WithinRetention.Events = events.Events - events.EventsRemoved
 	stats.LastEventAt = events.LastEventAt
 
-	if events.LastEventAt != nil {
-		stats.LastEvent = relativeTime(*events.LastEventAt, now)
-		stats.LastEventUTC =
-			events.LastEventAt.UTC().Format(time.DateTime) + " UTC"
-	}
-
 	for _, t := range targets {
 		stats.Lifetime.Deliveries += t.Deliveries
 		stats.Lifetime.Failures += t.Failed

internal/handlers/webhook_stats_test.go

@@ -265,13 +265,6 @@ func statsPane(t *testing.T, page string) string {
 	return strings.Join(strings.Fields(pane), " ")
 }
 
-// statsLastEventShown matches the pane's last event for an event that
-// arrived at at: a figure with the full time in UTC as its tooltip.
-func statsLastEventShown(at time.Time) string {
-	return `Last event</span>\s*<span [^>]*title="` +
-		at.UTC().Format(time.DateTime) + ` UTC">[^<]+</span>`
-}
-
 // assertStatsTargets checks, for the history seedStatsHistory builds,
 // each target's totals and its deliveries finished in the last 24
 // hours. The first target has ten deliveries and the replay, the
@@ -307,17 +300,14 @@ func assertStatsPaneAfterPrune(
 ) {
 	t.Helper()
 
-	page := renderSourceDetailPage(t, h, sess, hist.webhook.ID)
-	pane := statsPane(t, page)
+	pane := statsPane(t, renderSourceDetailPage(t, h, sess, hist.webhook.ID))
+	lastEvent := hist.newest.CreatedAt.UTC().Format("2006-01-02 15:04:05 UTC")
 
-	// The newest event arrived moments ago, so the last event is a
-	// few seconds ago.
-	assert.Regexp(t, `Entrypoints 12 \(11 active\) `+
-		`Targets 6 \(2 active\) `+
-		`Deliveries in progress 13 `+
-		`Last event \d+s `+
-		`Retention 14 days`, pane)
-	assert.Regexp(t, statsLastEventShown(hist.newest.CreatedAt), page)
+	assert.Contains(t, pane, "Entrypoints 12 (11 active) "+
+		"Targets 6 (2 active) "+
+		"Deliveries in progress 13 "+
+		"Last event "+lastEvent+" "+
+		"Retention 14 days")
 	assert.Contains(t, pane, "Lifetime Within retention "+
 		"Events 10 9 "+
 		"Deliveries 21 18 "+
@@ -450,14 +440,15 @@ func TestWebhookStats_LastEventSurvivesPruningEveryEvent(t *testing.T) {
 	require.NotNil(t, stats.LastEventAt)
 	assert.True(t, arrived.Equal(*stats.LastEventAt))
 
-	assert.Regexp(t, statsLastEventShown(arrived),
-		renderSourceDetailPage(t, h, sess, wh.ID))
+	pane := statsPane(t, renderSourceDetailPage(t, h, sess, wh.ID))
+	assert.Contains(t, pane,
+		"Last event "+arrived.UTC().Format("2006-01-02 15:04:05 UTC"))
 }
 
-// TestWebhookStats_LastEventInUTC checks that the tooltip of the pane's
-// last event gives the time in UTC, as the event list does, when the
-// time was stored in another zone, as it is on a host whose local time
-// is not UTC.
+// TestWebhookStats_LastEventInUTC checks that the pane shows when the
+// last event arrived in UTC, as the event list does, when the time was
+// stored in another zone, as it is on a host whose local time is not
+// UTC.
 func TestWebhookStats_LastEventInUTC(t *testing.T) {
 	t.Parallel()
 
@@ -483,9 +474,8 @@ func TestWebhookStats_LastEventInUTC(t *testing.T) {
 	require.NoError(t, database.AddEventTotals(webhookDB,
 		database.EventTotals{Events: 1, LastEventAt: &arrived}))
 
-	assert.Regexp(t,
-		`Last event</span>\s*<span [^>]*title="2026-03-05 03:30:00 UTC">`,
-		renderSourceDetailPage(t, h, sess, wh.ID))
+	pane := statsPane(t, renderSourceDetailPage(t, h, sess, wh.ID))
+	assert.Contains(t, pane, "Last event 2026-03-05 03:30:00 UTC")
 }
 
 // TestWebhookStats_PaneShowsRetentionPeriod checks that the statistics
@@ -551,11 +541,8 @@ func TestWebhookStats_WebhookWithNoEvents(t *testing.T) {
 	assert.Equal(t, &handlers.WebhookStats{}, h.WebhookStatsForTest(wh.ID))
 	assert.Equal(t, "—", handlers.RecentWindow{}.FailurePercent())
 
-	page := renderSourceDetailPage(t, h, sess, wh.ID)
-	pane := statsPane(t, page)
+	pane := statsPane(t, renderSourceDetailPage(t, h, sess, wh.ID))
 	assert.Contains(t, pane, "Last event none")
-	assert.Regexp(t, `Last event</span>\s*<span class="[^"]*">none</span>`,
-		page, "a last event of none has a tooltip")
 	assert.Contains(t, pane, "Failure percentage — —")
 	assert.False(t, dbMgr.DBExists(wh.ID))
 }
@@ -580,35 +567,3 @@ func TestRecentWindow_FailurePercent(t *testing.T) {
 		assert.Equal(t, tt.want, tt.window.FailurePercent(), tt.window)
 	}
 }
-
-// TestRelativeTime pins how the pane writes the time since the last
-// event, at each boundary between its units.
-func TestRelativeTime(t *testing.T) {
-	t.Parallel()
-
-	now := time.Date(2026, time.October, 26, 12, 0, 0, 0, time.UTC)
-
-	tests := []struct {
-		ago  time.Duration
-		want string
-	}{
-		{0, "0s"},
-		{59900 * time.Millisecond, "59s"},
-		{60 * time.Second, "1m"},
-		{61 * time.Second, "1m1s"},
-		{3599 * time.Second, "59m59s"},
-		{3600 * time.Second, "1h"},
-		{3660 * time.Second, "1h1m"},
-		{86399 * time.Second, "23h59m"},
-		{86400 * time.Second, "1d"},
-		{90000 * time.Second, "1d1h"},
-		{400*24*time.Hour + 3*time.Hour, "400d3h"},
-		// An event time ahead of the server clock.
-		{-90 * time.Second, "0s"},
-	}
-
-	for _, tt := range tests {
-		assert.Equal(t, tt.want,
-			handlers.RelativeTimeForTest(now.Add(-tt.ago), now), tt.ago)
-	}
-}

internal/server/alpine_browser_test.go

@@ -61,8 +61,7 @@ const (
 // event log in a headless browser, served by the real router and so
 // under the real Content-Security-Policy, and checks that the pages'
 // Alpine.js directives, the copy control and the delete prompts work,
-// that a target's row shows its delivery counts, and that the
-// Statistics block shows how long ago the last event arrived.
+// and that a target's row shows its delivery counts.
 func TestAlpineRunsUnderTheSecurityPolicy(t *testing.T) {
 	t.Parallel()
 
@@ -98,7 +97,6 @@ func TestAlpineRunsUnderTheSecurityPolicy(t *testing.T) {
 	checkCopy(ctx, t, page)
 	checkEntrypointEdit(ctx, t, page, page+"/events")
 	checkRecentEvents(ctx, t, page)
-	checkStatsLastEvent(ctx, t, env, webhook.ID, page)
 	checkArchiveChoice(ctx, t, srv.URL+"/hooks/new", page)
 	checkNewWebhookTargets(ctx, t, env, srv.URL+"/hooks/new")
 	checkRefusedNewWebhook(ctx, t, srv.URL+"/hooks/new")
@@ -833,41 +831,6 @@ func checkRecentEvents(ctx context.Context, t *testing.T, url string) {
 		"the event's own page does not show its body")
 }
 
-// checkStatsLastEvent records that the last event of the webhook
-// webhookID arrived 3 days, 4 hours and 30 minutes ago, loads its page,
-// and checks that the Statistics block shows the last event as "3d4h"
-// with the full time in UTC as its tooltip.
-func checkStatsLastEvent(
-	ctx context.Context, t *testing.T, env *testEnv, webhookID, url string,
-) {
-	t.Helper()
-
-	webhookDB, err := env.dbMgr.GetDB(webhookID)
-	require.NoError(t, err)
-
-	ago := 3*24*time.Hour + 4*time.Hour + 30*time.Minute
-	arrived := time.Now().Add(-ago)
-	require.NoError(t, database.AddEventTotals(webhookDB,
-		database.EventTotals{LastEventAt: &arrived}))
-
-	figure := `//span[text()="Last event"]` +
-		`/following-sibling::span[text()="3d4h"]`
-
-	var (
-		title string
-		found bool
-	)
-
-	require.NoError(t, chromedp.Run(ctx, loadPage(url)))
-	require.True(t, shown(ctx, figure),
-		`the Statistics block does not show the last event as "3d4h"`)
-	require.NoError(t, chromedp.Run(ctx, chromedp.AttributeValue(
-		figure, "title", &title, &found, chromedp.BySearch,
-	)))
-	assert.Equal(t, arrived.UTC().Format(time.DateTime)+" UTC", title,
-		"the last event's tooltip is not the full time in UTC")
-}
-
 // checkEventLog loads the event log and checks that of its events only
 // the newest, eventID, starts expanded: its row says so and its caret is
 // turned up, and the log's last event, lastEventID, starts collapsed. In

internal/server/static_assets_test.go

@@ -13,6 +13,9 @@ import (
 
 // TestBaseTemplateScriptsAreServed walks every /s/ script the base
 // template loads on each page and fetches it through the real router.
+// Alpine.js is extracted from its tarball in 3p/ at build time, so the
+// file is not in the tree: this is the check that the page still gets
+// the JavaScript it asks for.
 func TestBaseTemplateScriptsAreServed(t *testing.T) {
 	t.Parallel()
 

script/assets

@@ -0,0 +1,17 @@
+#!/bin/sh
+# script/assets: extract Alpine.js from its npm package tarball, committed
+# in 3p/, to static/js/alpine.min.js, where go:embed reads it. The package
+# is @alpinejs/csp, Alpine's build for pages whose Content-Security-Policy
+# forbids eval. The extracted file is not committed. make build, make dev
+# and the Dockerfile's lint, test and build stages run this first.
+set -eu
+
+ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
+
+main() {
+    cd "$ROOT"
+    tar -xzOf 3p/alpinejs-csp-3.14.9.tgz package/dist/cdn.min.js \
+        >static/js/alpine.min.js
+}
+
+main "$@"

static/static.go

@@ -6,11 +6,9 @@ import (
 )
 
 // Static holds the CSS and JavaScript files the web UI's pages load. They
-// are named one by one, so a missing file fails the build instead of
-// leaving the pages without it.
-//
-// js/alpine.min.js is Alpine.js, committed unchanged. It is
-// package/dist/cdn.min.js from the npm package @alpinejs/csp 3.14.9.
+// are named one by one so that a missing js/alpine.min.js, which make
+// assets extracts and git does not track, fails the build instead of
+// leaving the pages without Alpine.js.
 //
 //go:embed css/tailwind.css css/style.css js/app.js js/alpine.min.js
 var Static embed.FS

templates/webhook_stats.html

@@ -22,11 +22,7 @@
         </div>
         <div>
             <span class="text-gray-500">Last event</span>
-            {{if .LastEvent}}
-            <span class="font-medium text-gray-900" title="{{.LastEventUTC}}">{{.LastEvent}}</span>
-            {{else}}
-            <span class="font-medium text-gray-900">none</span>
-            {{end}}
+            <span class="font-medium text-gray-900">{{with .LastEventAt}}{{.UTC.Format "2006-01-02 15:04:05 UTC"}}{{else}}none{{end}}</span>
         </div>
         <div>
             <span class="text-gray-500">Retention</span>