With TRUSTED_PROXIES empty behind the reverse proxy production is
required to run behind, every login POST keyed on the proxy's address
and shared one 5/minute bucket. A stranger sending five POSTs a
minute -- 0.08 requests per second, from anywhere -- kept that bucket
permanently full, and the operator's own correct password was answered
429 indefinitely with no second administrative path.
The login POST no longer has a pre-emptive limiter. The handler
verifies credentials first and spends budget only on a FAILED attempt,
so a correct password is never throttled whatever the counters hold.
Three things follow, and are implemented together because the first is
unsafe without the other two:
- Failures are counted per (client bucket, submitted username), five
per minute, after which further failures get 429 with a Retry-After.
A successful login clears the counter, so mistyping and then
succeeding does not leave the operator throttled.
- Both key sets are capped at 1024 entries. The submitted username is
attacker-controlled, so past the first cap failures fall back to a
counter keyed on the client alone, and past both caps a failure is
answered as throttled without being recorded. Tracked state stays
under half a megabyte and does not grow with invented usernames.
- Concurrent Argon2id verifications are capped at two, a 128 MB
ceiling at 64 MB per hash, and the queue for those slots is capped
at 16 waiters. Every password-hashing endpoint takes a slot,
including the password-change endpoint, which holds one across both
its hashes. A request that waits five seconds without a slot is
answered 503, and one that arrives with the queue already full is
shed with 503 immediately rather than joining it. Bounding the wait
alone would not bound memory, and the queue depth is sized from what
a parked waiter measurably retains rather than from the 1 MB body
cap, which bounds only the raw body read. The body-cap, CSRF and
form-parsing middleware all run before the guard, so a waiter holds
its parsed form plus its request header block for the whole wait.
Measured on the pinned go1.26.1 toolchain as the HeapAlloc delta
across two GCs with 64 waiters parked in the handler: an ordinary
two-field login form retains ~0 MB, a 1 MB urlencoded body at Go's
10,000-parameter parse cap retains 2.82 MB (3.09 MB with %41
escapes), and the ~0.9 MB of headers the 1 MB header cap allows
takes it to 4.18 MB. The retained parse and the header block
dominate, not the raw body. So 16 waiters: 16 x 4.18 MB is about
67 MB of committed queue memory, and two slots drain a full 16-deep
queue in about 0.6 s, far inside the deadline. Peak commitment for
the endpoint is about 203 MB — 128 MB of Argon2id plus the 18
requests holding a parsed form, 16 queued and the 2 being hashed, at
about 75 MB.
An unknown username is verified against a dummy hash instead of
returning early, so a nonexistent account costs the same time as a
real one and the response cannot be used to enumerate usernames.
The password-change limiter is unchanged: RequireAuth runs ahead of
it, so only a request already carrying a valid session reaches its
bucket.
Two consequences are documented rather than fixed, because they follow
from the shape the issue asks for. Online guessing throughput rises
from 5 a minute to roughly 27 a second, about 2.3 million a day: the
credential check always precedes the counter, so the 429 is a label on
the response rather than a gate in front of the hash, and what bounds
brute force is the semaphore. And under a sustained flood the residual
exposure is a loss of login availability, not merely of latency --
above about 27 requests a second most attempts are shed with 503, so a
determined flood still denies login for as long as it runs. It costs
roughly 400x more to run, nothing accumulates, and the first attempt
after it stops succeeds. Restarting the service does not help: the
counters a restart clears are not what is saturated.
Also adds the missing test for the third bucketKey call site, where
the peer is a trusted proxy but the forwarded chain names no client.
Every existing test of that fallback uses an IPv4 proxy, where
bucketKey is the identity function, so dropping the /64 masking there
left the suite green.
README and the TRUSTED_PROXIES startup warning updated: a shared
bucket now costs precision, not the availability of the admin path.
check / check (push) Superseded by a newer commit; never tested
CSRF ran before MaxBodySize, so the CSRF middleware parsed the form body
before any cap applied and an oversized request was read in full before
being rejected. MaxBodySize is now the first middleware in all four route
groups that parse forms, ahead of CSRF and RequireAuth.
An oversize request therefore gets 413 without the handler running and
without state changing, including the password-change route.
Note the ordering trade: an unauthenticated client now receives 413 rather
than an auth redirect on /user/{username}/password.
Bumps golangci-lint from v2.11.3 to v2.12.2 and adopts the canonical lint config.
## Version pins
- `Dockerfile`: `golangci/golangci-lint:v2.12.2` Debian image, pinned by digest, dated `2026-08-07`
- `script/bootstrap`: `GOLANGCI_LINT_VERSION=2.12.2` with updated sha256 pins for the `linux-amd64` and `linux-arm64` release archives
## Config
`.golangci.yml` replaced with the canonical config. The previous file kept `lll`/`funlen`/`cyclop`/`dupl` settings under the top-level `linters-settings` key, which the v2 schema ignores; the canonical config nests them under `linters.settings`, so those thresholds now actually apply. The unsupported `issues.exclude-use-default` key was dropped.
## Lint fixes (32 findings)
- `lll` (7): wrapped or shortened over-length lines (struct tag comments moved above fields, test logger construction split, `session.NewForTest` signature wrapped, shortened a `#nosec` comment)
- `goconst` (17): replaced repeated `"POST"`/`"PUT"` literals with `http.MethodPost`/`http.MethodPut`, added shared test constants for `webhooker-test`/`test`/`application/json`, and added `tmplKeyError`/`tmplKeyWebhook` constants for template data keys in `internal/handlers`
- `dupl` (8): merged `buildHTTPTargetConfig` and `buildSlackTargetConfig` into a parameterized `buildURLTargetConfig`; removed the duplicate `iWebhookDB` test helper in favor of `testWebhookDB`; extracted shared helpers in middleware and session tests
No `//nolint` directives were added and behavior is unchanged. `make check` (fmt-check, tests, lint) passes.
Note: golangci-lint v2.12 deprecates the `gomodguard` linter in favor of `gomodguard_v2`; the canonical config change for that is left for a future coordinated update.
Co-authored-by: sneak <sneak@sneak.berlin>
Reviewed-on: #86
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Closes [issue #50](#50)
## Summary
Refactors the Dockerfile to use a separate lint stage with a pinned golangci-lint Docker image, following the pattern used by [sneak/pixa](https://git.eeqj.de/sneak/pixa). This replaces the previous approach of installing golangci-lint via curl in the builder stage.
## Changes
### Dockerfile
- **New `lint` stage** using `golangci/golangci-lint:v2.11.3` (Debian-based, pinned by sha256 digest) as a separate build stage
- **Builder stage** depends on lint via `COPY --from=lint /src/go.sum /dev/null` — build won't proceed unless linting passes
- **Go bumped** from 1.24 to 1.26.1 (`golang:1.26.1-bookworm`, pinned by sha256)
- **golangci-lint bumped** from v1.64.8 to v2.11.3
- All three Docker images (golangci-lint, golang, alpine) pinned by sha256 digest
- Debian-based golangci-lint image used (not Alpine) because mattn/go-sqlite3 CGO does not compile on musl (off64_t)
### Linter Config (.golangci.yml)
- Migrated from v1 to v2 format (`version: "2"` added)
- Removed linters no longer available in v2: `gofmt` (handled by `make fmt-check`), `gosimple` (merged into `staticcheck`), `typecheck` (always-on in v2)
- Same set of linters enabled — no rules weakened
### Code Fixes (all lint issues from v2 upgrade)
- Added package comments to all packages
- Added doc comments to all exported types, functions, and methods
- Fixed unchecked errors flagged by `errcheck` (sqlDB.Close, os.Setenv in tests, resp.Body.Close, fmt.Fprint)
- Fixed unused parameters flagged by `revive` (renamed to `_`)
- Fixed `gosec` G120 warnings: added `http.MaxBytesReader` before `r.ParseForm()` calls
- Fixed `staticcheck` QF1012: replaced `WriteString(fmt.Sprintf(...))` with `fmt.Fprintf`
- Fixed `staticcheck` QF1003: converted if/else chain to tagged switch
- Renamed `DeliveryTask` → `Task` to avoid package stutter (`delivery.Task` instead of `delivery.DeliveryTask`)
- Renamed shadowed builtin `max` parameter to `upperBound` in `cryptoRandInt`
- Used `t.Setenv` instead of `os.Setenv` in tests (auto-restores)
### README.md
- Updated version requirements: Go 1.26+, golangci-lint v2.11+
- Updated Dockerfile description in project structure
## Verification
`docker build .` passes cleanly — formatting check, linting, all tests, and build all succeed.
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #55
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
This PR implements three security hardening measures:
### Security Headers Middleware (closes #34)
Adds a `SecurityHeaders()` middleware applied globally to all routes. Every response now includes:
- `Strict-Transport-Security: max-age=63072000; includeSubDomains; preload`
- `X-Content-Type-Options: nosniff`
- `X-Frame-Options: DENY`
- `Content-Security-Policy: default-src 'self'; script-src 'self' 'unsafe-inline'; style-src 'self' 'unsafe-inline'`
- `Referrer-Policy: strict-origin-when-cross-origin`
- `Permissions-Policy: camera=(), microphone=(), geolocation=()`
### Session Fixation Prevention (closes #38)
Adds a `Regenerate()` method to the session manager that destroys the old session and creates a new one with a fresh ID, copying all session values. Called after successful login to prevent session fixation attacks.
### Request Body Size Limits (closes #39)
Adds a `MaxBodySize()` middleware using `http.MaxBytesReader` to limit POST/PUT/PATCH request bodies to 1 MB. Applied to all form endpoints (`/pages`, `/sources`, `/source/*`).
## Files Changed
- `internal/middleware/middleware.go` — Added `SecurityHeaders()` and `MaxBodySize()` middleware
- `internal/session/session.go` — Added `Regenerate()` method for session fixation prevention
- `internal/handlers/auth.go` — Updated login handler to regenerate session after authentication
- `internal/server/routes.go` — Added SecurityHeaders globally, MaxBodySize to form route groups
- `README.md` — Documented new middleware in stack, updated Security section, moved items to completed TODO
closes #34, closes #38, closes #39
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #41
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Templates are now embedded using //go:embed and parsed once at startup
with template.Must(template.ParseFS(...)). This avoids re-parsing
template files from disk on every request and removes the dependency
on template files being present at runtime.
closes #7
## Summary
This PR brings the webhooker repo into full REPO_POLICIES compliance, addressing both [issue #1](#1) and [issue #2](#2).
## Changes
### New files
- **`cmd/webhooker/main.go`** — The missing application entry point. Uses Uber fx to wire together all internal packages (config, database, logger, server, handlers, middleware, healthcheck, globals, session). Minimal glue code.
- **`REPO_POLICIES.md`** — Fetched from authoritative source (`sneak/prompts`)
- **`.editorconfig`** — Fetched from authoritative source
- **`.dockerignore`** — Sensible Go project exclusions
- **`.gitea/workflows/check.yml`** — CI workflow that runs `docker build .` on push to any branch (Gitea Actions format, actions/checkout pinned by sha256)
- **`configs/config.yaml.example`** — Moved from root `config.yaml`
### Modified files
- **`Makefile`** — Complete rewrite with all REPO_POLICIES required targets: `test`, `lint`, `fmt`, `fmt-check`, `check`, `build`, `hooks`, `docker`, `clean`, plus `dev`, `run`, `deps`
- **`Dockerfile`** — Complete rewrite:
- Builder: `golang:1.24` (Debian-based, pinned by `sha256:d2d2bc1c84f7...`). Debian needed because `gorm.io/driver/sqlite` pulls `mattn/go-sqlite3` (CGO) which fails on Alpine musl.
- golangci-lint v1.64.8 installed from GitHub release archive with sha256 verification (v1.x because `.golangci.yml` uses v1 config format)
- Runs `make check` (fmt-check + lint + test + build) as build step
- Final stage: `alpine:3.21` (pinned by `sha256:c3f8e73fdb79...`) with non-root user, healthcheck, port 8080
- **`README.md`** — Rewritten with all required REPO_POLICIES sections: description line with name/purpose/category/license/author, Getting Started, Rationale, Design, TODO (integrated from TODO.md), License, Author
- **`.gitignore`** — Fixed `webhooker` pattern to `/webhooker` (was blocking `cmd/webhooker/`), added `config.yaml` to prevent committing runtime config with secrets
- **`static/static.go`** — Removed `vendor` from embed directive (directory was empty/missing)
- **`internal/database/database_test.go`** — Fixed to use in-memory config via `afero.MemMapFs` instead of depending on `config.yaml` on disk. Test is now properly isolated.
- **`go.mod`/`go.sum`** — `go mod tidy`
### Removed files
- **`TODO.md`** — Content integrated into README.md TODO section
- **`config.yaml`** — Moved to `configs/config.yaml.example`
## Verification
- `docker build .` passes (lint ✅, test ✅, build ✅)
- All existing tests pass with no modifications to assertions or test logic
- `.golangci.yml` untouched
closes #1
closes #2
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #6
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
