TODO.md

@@ -22,6 +22,17 @@ the tag exists and is exercised; what is left is merging `next` to
 
 # Completed Steps
 
+- 2026-10-08: Kept the progress line of a snapshot with more than one
+  path within 100%
+  ([issue #271](https://git.eeqj.de/sneak/vaultik/issues/271)). The
+  bytes and files processed counted every path, but the totals they
+  were divided by held only the current path's, so a second path
+  smaller than the first showed more than 100% and an ETA of `unknown`.
+  The totals now add up over the paths scanned so far. The rate behind
+  the ETA restarts when each path's scan phase ends, so that phase does
+  not lower the rate while the path is processed; until then the rate
+  is the previous path's.
+
 - 2026-10-08: Made a second `snapshot create` of one name succeed when
   it starts in the same second as the first
   ([issue #270](https://git.eeqj.de/sneak/vaultik/issues/270)). The

internal/snapshot/progress.go

@@ -56,23 +56,27 @@ const (
 
 // ProgressStats holds atomic counters for progress tracking
 type ProgressStats struct {
-	FilesScanned     atomic.Int64 // Total files seen during scan (includes skipped)
-	FilesProcessed   atomic.Int64 // Files actually processed in phase 2
-	FilesSkipped     atomic.Int64 // Files skipped due to no changes
-	BytesScanned     atomic.Int64 // Bytes from new/changed files only
-	BytesSkipped     atomic.Int64 // Bytes from unchanged files
-	BytesProcessed   atomic.Int64 // Actual bytes processed (for ETA calculation)
-	ChunksCreated    atomic.Int64
-	BlobsCreated     atomic.Int64
-	BlobsUploaded    atomic.Int64
-	BytesUploaded    atomic.Int64
-	CurrentFile      atomic.Value // stores string
-	TotalSize        atomic.Int64 // Total size to process (set after scan phase)
-	TotalFiles       atomic.Int64 // Total files to process in phase 2
-	ProcessStartTime atomic.Value // stores time.Time when processing starts
-	StartTime        time.Time
-	mu               sync.RWMutex
-	lastDetailTime   time.Time
+	FilesScanned   atomic.Int64 // Total files seen during scan (includes skipped)
+	FilesProcessed atomic.Int64 // Files actually processed in phase 2
+	FilesSkipped   atomic.Int64 // Files skipped due to no changes
+	BytesScanned   atomic.Int64 // Bytes from new/changed files only
+	BytesSkipped   atomic.Int64 // Bytes from unchanged files
+	BytesProcessed atomic.Int64 // Actual bytes processed (for ETA calculation)
+	ChunksCreated  atomic.Int64
+	BlobsCreated   atomic.Int64
+	BlobsUploaded  atomic.Int64
+	BytesUploaded  atomic.Int64
+	CurrentFile    atomic.Value // stores string
+	TotalSize      atomic.Int64 // Size to process in the paths scanned so far
+	TotalFiles     atomic.Int64 // Files to process in the paths scanned so far
+	StartTime      time.Time
+	mu             sync.RWMutex
+	lastDetailTime time.Time
+
+	// Guarded by mu: when the last scan phase ended, and
+	// BytesProcessed at that moment.
+	processStartTime  time.Time
+	processStartBytes int64
 
 	// Upload tracking
 	CurrentUpload    atomic.Value // stores *UploadInfo
@@ -148,10 +152,36 @@ func (pr *ProgressReporter) GetStats() *ProgressStats {
 	return pr.stats
 }
 
-// SetTotalSize sets the total size to process (after scan phase)
-func (pr *ProgressReporter) SetTotalSize(size int64) {
-	pr.stats.TotalSize.Store(size)
-	pr.stats.ProcessStartTime.Store(time.Now().UTC())
+// AddTotalSize adds the size one path of the snapshot has to process to
+// the total, once that path's scan phase is done, and starts measuring
+// the processing rate again. The processed counts run across every path,
+// so the total does too. Restarting the rate keeps a path's scan phase,
+// which processes nothing, out of the rate while that path is processed.
+// During a later path's scan phase the rate is still the previous
+// path's, and falls as that scan goes on.
+func (pr *ProgressReporter) AddTotalSize(size int64) {
+	pr.stats.TotalSize.Add(size)
+
+	pr.stats.mu.Lock()
+	defer pr.stats.mu.Unlock()
+
+	pr.stats.processStartTime = time.Now().UTC()
+	pr.stats.processStartBytes = pr.stats.BytesProcessed.Load()
+}
+
+// processRate returns the bytes processed per second since the last scan
+// phase ended, or 0 before the first path's scan phase is done.
+func (s *ProgressStats) processRate() float64 {
+	s.mu.RLock()
+	defer s.mu.RUnlock()
+
+	if s.processStartTime.IsZero() {
+		return 0
+	}
+
+	processed := s.BytesProcessed.Load() - s.processStartBytes
+
+	return float64(processed) / time.Since(s.processStartTime).Seconds()
 }
 
 // Helper functions
@@ -357,19 +387,12 @@ func (pr *ProgressReporter) printSummaryStatus() {
 	// Calculate ETA if we have total size and are processing
 	etaStr := ""
 
-	if totalSize > 0 && bytesProcessed > 0 {
-		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		if ok && !processStart.IsZero() {
-			processElapsed := time.Since(processStart)
-
-			rate := float64(bytesProcessed) / processElapsed.Seconds()
-			if rate > 0 {
-				remainingBytes := totalSize - bytesProcessed
-				remainingSeconds := float64(remainingBytes) / rate
-				eta := time.Duration(remainingSeconds * float64(time.Second))
-				etaStr = " | ETA: " + formatDuration(eta)
-			}
-		}
+	processRate := pr.stats.processRate()
+	if totalSize > 0 && processRate > 0 {
+		remainingBytes := totalSize - bytesProcessed
+		remainingSeconds := float64(remainingBytes) / processRate
+		eta := time.Duration(remainingSeconds * float64(time.Second))
+		etaStr = " | ETA: " + formatDuration(eta)
 	}
 
 	rate := float64(bytesScanned+bytesSkipped) / elapsed.Seconds()
@@ -421,25 +444,18 @@ func (pr *ProgressReporter) printDetailedStatus() {
 	log.Info("Elapsed time", "duration", formatDuration(elapsed))
 
 	// Calculate and show ETA if we have data
-	if totalSize > 0 && bytesProcessed > 0 {
-		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		if ok && !processStart.IsZero() {
-			processElapsed := time.Since(processStart)
-
-			processRate := float64(bytesProcessed) / processElapsed.Seconds()
-			if processRate > 0 {
-				remainingBytes := totalSize - bytesProcessed
-				remainingSeconds := float64(remainingBytes) / processRate
-				eta := time.Duration(remainingSeconds * float64(time.Second))
-				percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
-				log.Info("Overall progress",
-					"percent", fmt.Sprintf("%.1f%%", percentComplete),
-					"processed", humanize.Bytes(safeUint64(bytesProcessed)),
-					"total", humanize.Bytes(safeUint64(totalSize)),
-					"rate", humanize.Bytes(uint64(processRate))+"/s",
-					"eta", formatDuration(eta))
-			}
-		}
+	processRate := pr.stats.processRate()
+	if totalSize > 0 && processRate > 0 {
+		remainingBytes := totalSize - bytesProcessed
+		remainingSeconds := float64(remainingBytes) / processRate
+		eta := time.Duration(remainingSeconds * float64(time.Second))
+		percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
+		log.Info("Overall progress",
+			"percent", fmt.Sprintf("%.1f%%", percentComplete),
+			"processed", humanize.Bytes(safeUint64(bytesProcessed)),
+			"total", humanize.Bytes(safeUint64(totalSize)),
+			"rate", humanize.Bytes(uint64(processRate))+"/s",
+			"eta", formatDuration(eta))
 	}
 
 	log.Info("Files processed",

internal/snapshot/progress_rate_test.go

@@ -0,0 +1,54 @@
+//nolint:testpackage // exercises the unexported processRate helper
+package snapshot
+
+import (
+	"testing"
+	"time"
+)
+
+// TestProcessRateNotLoweredByLaterScanPhase feeds the reporter two paths
+// that each take 10 seconds to process, the second after a 30-second scan
+// phase. That scan phase processes nothing, so the rate while the second
+// path is processed must be that path's own.
+func TestProcessRateNotLoweredByLaterScanPhase(t *testing.T) {
+	t.Parallel()
+
+	const (
+		pathSize       = 1000
+		processingTime = 10 * time.Second
+		scanTime       = 30 * time.Second
+	)
+
+	// Never started, but Stop releases its tickers and signal handler.
+	progress := NewProgressReporter()
+	defer progress.Stop()
+
+	stats := progress.GetStats()
+
+	// Moves the processing start time back instead of sleeping.
+	elapse := func(d time.Duration) {
+		stats.mu.Lock()
+		defer stats.mu.Unlock()
+
+		stats.processStartTime = stats.processStartTime.Add(-d)
+	}
+
+	progress.AddTotalSize(pathSize)
+	stats.BytesProcessed.Add(pathSize)
+	elapse(processingTime)
+
+	elapse(scanTime)
+	progress.AddTotalSize(pathSize)
+	stats.BytesProcessed.Add(pathSize)
+	elapse(processingTime)
+
+	want := pathSize / processingTime.Seconds()
+	got := stats.processRate()
+
+	// The test's own run time adds to the elapsed time, so got is a hair
+	// under want.
+	if got > want || got < want*0.99 {
+		t.Errorf("rate while the second path is processed is %.1f bytes/s, "+
+			"want %.1f", got, want)
+	}
+}

internal/snapshot/progress_test.go

@@ -0,0 +1,94 @@
+package snapshot_test
+
+import (
+	"context"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/spf13/afero"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/snapshot"
+)
+
+// TestProgressPercentWithSecondPathSmaller backs up two paths with one
+// scanner, as a snapshot with two paths does, the second path smaller
+// than the first. The progress line divides the bytes processed by the
+// total size, so both must count both paths to stay within 100%.
+func TestProgressPercentWithSecondPathSmaller(t *testing.T) {
+	t.Parallel()
+
+	fs := afero.NewMemMapFs()
+	files := map[string]string{
+		"/large/one.txt":   strings.Repeat("1", 4000),
+		"/large/two.txt":   strings.Repeat("2", 4000),
+		"/small/three.txt": strings.Repeat("3", 1000),
+	}
+
+	for path, content := range files {
+		err := fs.MkdirAll(filepath.Dir(path), 0755)
+		if err != nil {
+			t.Fatalf("mkdir: %v", err)
+		}
+
+		err = afero.WriteFile(fs, path, []byte(content), 0644)
+		if err != nil {
+			t.Fatalf("write %s: %v", path, err)
+		}
+	}
+
+	db, err := database.NewTestDB()
+	if err != nil {
+		t.Fatalf("create test db: %v", err)
+	}
+
+	t.Cleanup(func() {
+		cerr := db.Close()
+		if cerr != nil {
+			t.Errorf("close db: %v", cerr)
+		}
+	})
+
+	repos := database.NewRepositories(db)
+
+	scanner := snapshot.NewScanner(snapshot.ScannerConfig{
+		FS:               fs,
+		ChunkSize:        int64(1024 * 16),
+		Repositories:     repos,
+		MaxBlobSize:      int64(1024 * 1024),
+		CompressionLevel: 3,
+		AgeRecipients:    []string{testAgePublicKey},
+		EnableProgress:   true,
+	})
+
+	// Never started, but Stop releases its tickers and signal handler.
+	progress := scanner.GetProgress()
+	defer progress.Stop()
+
+	ctx := context.Background()
+	snapshotID := "test-snapshot-progress"
+	createTestSnapshotRecord(ctx, t, repos, snapshotID)
+
+	for _, path := range []string{"/large", "/small"} {
+		_, err := scanner.Scan(ctx, path, snapshotID)
+		if err != nil {
+			t.Fatalf("scanning %s: %v", path, err)
+		}
+	}
+
+	stats := progress.GetStats()
+
+	// Directories count toward the total size but produce no chunks, so
+	// the percentage ends just under 100%.
+	percent := float64(stats.BytesProcessed.Load()) /
+		float64(stats.TotalSize.Load()) * 100
+	if percent > 100 {
+		t.Errorf("progress after both paths is %.1f%%, want at most 100%%",
+			percent)
+	}
+
+	if stats.FilesProcessed.Load() != stats.TotalFiles.Load() {
+		t.Errorf("progress after both paths is %d of %d files, want all",
+			stats.FilesProcessed.Load(), stats.TotalFiles.Load())
+	}
+}

internal/snapshot/scanner.go

@@ -407,8 +407,8 @@ func (s *Scanner) summarizeScanPhase(
 	}
 
 	if s.progress != nil {
-		s.progress.SetTotalSize(totalSizeToProcess)
-		s.progress.GetStats().TotalFiles.Store(int64(len(filesToProcess)))
+		s.progress.AddTotalSize(totalSizeToProcess)
+		s.progress.GetStats().TotalFiles.Add(int64(len(filesToProcess)))
 	}
 
 	log.Info("Phase 1 complete",