Make prune and remote nuke fail when a delete fails (closes #290)

prune, and the prune step of snapshot create --prune, counted a blob
it could not delete and still exited 0. It now prints its summary or
--json document and then returns an error, which replaces the
"Failed to delete N blob(s)" line.

remote nuke only warned when a snapshot's metadata could not be
deleted, advised vaultik prune, which never removes metadata, and then
reported the store empty. It now stops with an error, does not report
the store empty, and says to run vaultik remote nuke --force again. It
checks that the local index belongs to the configured destination
before deleting anything, and that error carries no such advice. A
successful nuke no longer advises prune.

Model: opus-5-5

README.md

@@ -349,9 +349,11 @@ the backup destination store. Blobs are NOT touched — deleting blobs
 requires reading every remaining remote manifest (the destination store
 may hold snapshots this host doesn't know about), which is what
 `vaultik prune` does. On success the command prints the exact `vaultik
-prune` invocation to run as a follow-up. Local row cleanup (files,
-chunks, blobs the snapshot was the last referrer for) runs
-automatically. If the destination store is unreachable, the local-DB
+prune` invocation to run as a follow-up. An ID that names no snapshot in
+the local index or on the destination store is an error; with
+`--local-only`, the snapshot must be in the local index. Local row
+cleanup (files, chunks, blobs the snapshot was the last referrer for)
+runs automatically. If the destination store is unreachable, the local-DB
 removal still completes and a warning is emitted; run `vaultik snapshot
 remove <snapshot-id>` again once the store is reachable to remove the
 snapshot's metadata from it (`vaultik prune` does not). To wipe everything
@@ -359,7 +361,8 @@ on the destination in one go, use `vaultik remote nuke --force`.
 * `--local-only`: Skip remote cleanup; only touch the local index
 * `--dry-run`: Show what would be deleted without deleting
 * `--force`: Skip confirmation prompt
-* `--json`: Output result as JSON
+* `--json`: Output result as JSON. Also skips the confirmation prompt, as
+  `--force` does.
 
 **`snapshot restore`**: Restore files from a backup snapshot.
 * Requires `VAULTIK_AGE_SECRET_KEY` environment variable
@@ -381,9 +384,12 @@ manifest on the destination store to compute the still-referenced blob
 set and delete any blob not in that set. Step (3) reads all remote
 manifests — network cost scales with the number of snapshots. `snapshot
 create --prune` runs the same cleanup automatically; this is the
-manual entry point for the same work.
+manual entry point for the same work. If a blob cannot be deleted, the
+command (and `snapshot create --prune`) exits non-zero.
 * `--force`: Skip confirmation prompt
-* `--json`: Output stats as JSON
+* `--json`: Output stats as JSON. Also skips the confirmation prompt, as
+  `--force` does. A blob that cannot be deleted is counted in
+  `blobs_failed`, and the document is printed before the non-zero exit.
 
 **`info`**: Display system configuration, storage settings, encryption
 recipients, and local database statistics.
@@ -396,20 +402,23 @@ key is skipped with a warning and is not printed. If a listed
 orphaned blob figures are reported as unknown; `--json` gives them as
 `null`, lists the remote key of each unreadable manifest in
 `unreadable_manifests` and counts the manifests under skipped names in
-`skipped_manifest_count`.
+`skipped_manifest_count`. An unreadable manifest also leaves its
+snapshot's blob count and blob size unknown, `null` in `--json`.
 * `--json`: Output as JSON
 
 **`remote nuke`**: Delete every snapshot's metadata and every blob from the
 backup destination store, leaving the bucket prefix empty. Destructive and
 irreversible. This is the single supported way to wipe the entire
-destination store.
+destination store. If anything cannot be deleted, the command exits
+non-zero; running it again deletes what is left.
 * `--force`: Required to confirm destruction.
 
 **`database delete`**: Delete the local SQLite state database file
 entirely. Remote storage is unaffected; the next backup will do a full
 scan and re-deduplicate against existing remote blobs, and the local
 index will re-bind to the currently configured storage destination.
-Use this after changing `storage_url` to a different destination.
+Use this after changing `storage_url`, or `s3.endpoint`, `s3.bucket` or
+`s3.prefix`, to a different destination.
 * `--force`: Skip confirmation prompt
 
 ---

TODO.md

@@ -22,6 +22,99 @@ the tag exists and is exercised; what is left is merging `next` to
 
 # Completed Steps
 
+- 2026-10-13: Made `prune` and `remote nuke` exit non-zero when a delete
+  fails ([issue #290](https://git.eeqj.de/sneak/vaultik/issues/290)).
+  `prune`, and the prune step of `snapshot create --prune`, counted a
+  blob it could not delete and still exited 0; it now prints its summary
+  or `--json` document and then fails. `remote nuke` warned about a
+  snapshot's metadata it could not delete, said to run `vaultik prune`,
+  which never removes metadata, and then reported the store empty. It
+  now fails without that report and says to run `vaultik remote nuke
+  --force` again, and a successful nuke no longer advises `prune` for
+  blobs it deletes itself.
+
+- 2026-10-13: Made `snapshot remove` fail for a snapshot that does not
+  exist ([issue #293](https://git.eeqj.de/sneak/vaultik/issues/293)).
+  The command never checked the ID: it reported the snapshot removed
+  from the local database and from the destination store and exited 0,
+  under `--json`, `--dry-run` and `--local-only` too. An ID that names
+  no snapshot in the local index or on the destination store is now an
+  error; with `--local-only`, the snapshot must be in the local index.
+  The command now reports a removal from either side only when one
+  happened, and `remote_removed` is true only when metadata was deleted.
+
+- 2026-10-12: Bound the local index to the destination an `s3.*` config
+  names ([issue #298](https://git.eeqj.de/sneak/vaultik/issues/298)).
+  Only `storage_url` was checked, so after `s3.bucket` or `s3.prefix`
+  changed, the next backup treated every chunk as already stored,
+  uploaded nothing, and completed a snapshot that could not be restored.
+  Without `storage_url`, the local index is now bound to `s3.endpoint`,
+  `s3.bucket` and `s3.prefix`, and a change is refused as a changed
+  `storage_url` is.
+
+- 2026-10-12: Rejected a retention duration longer than about 292 years
+  ([issue #289](https://git.eeqj.de/sneak/vaultik/issues/289)). The
+  number given to `--older-than` or `--keep-newer-than` was multiplied
+  by the length of its unit with no limit, so from `293y`, `15251w`,
+  `3559mo` or `106752d`, or a sum of parts such as `200y200y`, the
+  result wrapped to a negative duration. The cutoff then lay in the
+  future, every snapshot of the name was deleted, the one just made
+  included, and the command exited 0. Such a duration is now rejected
+  as invalid and nothing is deleted.
+
+- 2026-10-08: Made a backup cancelled under `--skip-errors` stop at once
+  ([issue #286](https://git.eeqj.de/sneak/vaultik/issues/286)). After
+  Ctrl-C or SIGTERM, phase 2 treated the cancellation error from each
+  remaining file like an unreadable file: it opened the file, printed an
+  error line for it, counted it as failed and went on to the next one.
+  The run now stops at the first file after the cancellation, and no
+  file is counted as failed because of it.
+
+- 2026-10-08: Made `remote nuke` delete the `.partial` files that
+  uploads cut off part-way leave on the destination store
+  ([issue #281](https://git.eeqj.de/sneak/vaultik/issues/281)). The
+  file and rclone listings skip such a file, so the command left it in
+  place and still reported the store empty. It now removes them under
+  `metadata/` and `blobs/` as its last step.
+
+- 2026-10-08: Made a local index error while recording a directory or
+  symlink stop a backup under `--skip-errors`
+  ([issue #284](https://git.eeqj.de/sneak/vaultik/issues/284)). Phase 2
+  only records such an entry in the local index, since it has no data
+  to open or read, but an error doing so was skipped like an unreadable
+  file. The snapshot then completed without the entry, and a restore
+  did not recreate it. The error now stops the backup, as it does
+  without the flag.
+
+- 2026-10-08: Counted a file that a backup could not store as failed
+  ([issue #280](https://git.eeqj.de/sneak/vaultik/issues/280)). A file
+  that phase 1 counted and phase 2 could not open, because it was
+  unreadable under `--skip-errors` or removed in between, was reported
+  in the summary as unchanged with its bytes as backed up, and the
+  `snapshots` row's `file_count` and `total_size` included it. The
+  summary now counts it as failed, and its data total and the row leave
+  it out.
+
+- 2026-10-08: Made `remote info` report a snapshot's blob count and
+  blob size as unknown when its manifest cannot be read
+  ([issue #272](https://git.eeqj.de/sneak/vaultik/issues/272)). The
+  orphan figures were already unknown in that case, but the snapshot's
+  row still gave 0 blobs and 0 B, in the table and in `--json`. The row
+  now reads `unknown` and `--json` gives `null`. A directory with no
+  manifest still shows 0, since the orphan figures count its blobs as
+  orphaned.
+
+- 2026-10-08: Kept the progress line of a snapshot with more than one
+  path within 100%
+  ([issue #271](https://git.eeqj.de/sneak/vaultik/issues/271)). The
+  bytes and files processed counted every path, but the totals they
+  were divided by held only the current path's, so a second path
+  smaller than the first showed more than 100% and an ETA of `unknown`.
+  The totals now add up over the paths scanned so far. The rate behind
+  the ETA restarts when each path's scan phase ends, so that phase does
+  not lower the rate while the path is processed; until then the rate
+  is the previous path's.
+
 - 2026-10-08: Made a second `snapshot create` of one name succeed when
   it starts in the same second as the first
   ([issue #270](https://git.eeqj.de/sneak/vaultik/issues/270)). The
@@ -30,6 +123,14 @@ the tag exists and is exercised; what is left is merging `next` to
   snapshots.id`. When the local index already has a snapshot with the
   ID, the create now waits a second and takes a new timestamp.
 
+- 2026-10-07: Documented that `--json` skips the confirmation prompt of
+  `snapshot remove` and `prune`
+  ([issue #268](https://git.eeqj.de/sneak/vaultik/issues/268)). Both
+  commands delete without asking under `--json`, since a prompt on stdout
+  would break the JSON document, but the help and the README described
+  only `--force` as skipping it. The `--json` help of both commands and
+  their README entries now say so.
+
 - 2026-10-07: Made a symlink whose target cannot be read stop the backup
   ([issue #269](https://git.eeqj.de/sneak/vaultik/issues/269)). It was
   left out of the snapshot with only a debug log line, even without

internal/cli/json_help_test.go

@@ -0,0 +1,24 @@
+package cli //nolint:testpackage // exercises the unexported command constructor
+
+import (
+	"testing"
+
+	"github.com/spf13/cobra"
+	"github.com/stretchr/testify/assert"
+)
+
+// TestJSONHelpSaysConfirmationPromptIsSkipped checks that the --json help
+// of `snapshot remove` and `prune` says the flag skips the confirmation
+// prompt. Both delete without asking under --json, since a prompt on
+// stdout would break the JSON document.
+func TestJSONHelpSaysConfirmationPromptIsSkipped(t *testing.T) {
+	t.Parallel()
+
+	for _, cmd := range []*cobra.Command{
+		newSnapshotRemoveCommand(),
+		NewPruneCommand(),
+	} {
+		assert.Contains(t, cmd.Flags().Lookup("json").Usage,
+			"skips the confirmation prompt", cmd.Name())
+	}
+}

internal/cli/prune.go

@@ -57,7 +57,8 @@ referenced.`,
 	}
 
 	cmd.Flags().BoolVar(&opts.Force, "force", false, "Skip confirmation prompt")
-	cmd.Flags().BoolVar(&opts.JSON, "json", false, "Output pruning stats as JSON")
+	cmd.Flags().BoolVar(&opts.JSON, "json", false,
+		"Output pruning stats as JSON; skips the confirmation prompt, as --force does")
 
 	return cmd
 }

internal/cli/snapshot.go

@@ -255,8 +255,12 @@ manifest (the destination store may hold snapshots this host doesn't
 know about), which is what 'vaultik prune' does. On success the command
 prints the exact 'vaultik prune' invocation to run as a follow-up.
 
+An ID that names no snapshot in the local index or on the destination
+store is an error.
+
 Use --local-only to skip the remote half (e.g. when you want to forget a
-snapshot locally without touching the destination store).
+snapshot locally without touching the destination store); the snapshot
+must then be in the local index.
 
 If the remote is unreachable, the local-database removal still completes
 and a warning is emitted; run 'vaultik snapshot remove <snapshot-id>' again
@@ -280,7 +284,8 @@ nuke --force' — it is the single supported entry point for that.`,
 	cmd.Flags().BoolVarP(&opts.Force, "force", "f", false, "Skip confirmation prompt")
 	cmd.Flags().BoolVar(&opts.DryRun, "dry-run", false,
 		"Show what would be removed without removing")
-	cmd.Flags().BoolVar(&opts.JSON, "json", false, "Output result as JSON")
+	cmd.Flags().BoolVar(&opts.JSON, "json", false,
+		"Output result as JSON; skips the confirmation prompt, as --force does")
 	cmd.Flags().BoolVar(&opts.LocalOnly, "local-only", false,
 		"Skip remote cleanup; only touch the local index")
 

internal/snapshot/progress.go

@@ -56,23 +56,27 @@ const (
 
 // ProgressStats holds atomic counters for progress tracking
 type ProgressStats struct {
-	FilesScanned     atomic.Int64 // Total files seen during scan (includes skipped)
-	FilesProcessed   atomic.Int64 // Files actually processed in phase 2
-	FilesSkipped     atomic.Int64 // Files skipped due to no changes
-	BytesScanned     atomic.Int64 // Bytes from new/changed files only
-	BytesSkipped     atomic.Int64 // Bytes from unchanged files
-	BytesProcessed   atomic.Int64 // Actual bytes processed (for ETA calculation)
-	ChunksCreated    atomic.Int64
-	BlobsCreated     atomic.Int64
-	BlobsUploaded    atomic.Int64
-	BytesUploaded    atomic.Int64
-	CurrentFile      atomic.Value // stores string
-	TotalSize        atomic.Int64 // Total size to process (set after scan phase)
-	TotalFiles       atomic.Int64 // Total files to process in phase 2
-	ProcessStartTime atomic.Value // stores time.Time when processing starts
-	StartTime        time.Time
-	mu               sync.RWMutex
-	lastDetailTime   time.Time
+	FilesScanned   atomic.Int64 // Total files seen during scan (includes skipped)
+	FilesProcessed atomic.Int64 // Files actually processed in phase 2
+	FilesSkipped   atomic.Int64 // Files skipped due to no changes
+	BytesScanned   atomic.Int64 // Bytes from new/changed files only
+	BytesSkipped   atomic.Int64 // Bytes from unchanged files
+	BytesProcessed atomic.Int64 // Actual bytes processed (for ETA calculation)
+	ChunksCreated  atomic.Int64
+	BlobsCreated   atomic.Int64
+	BlobsUploaded  atomic.Int64
+	BytesUploaded  atomic.Int64
+	CurrentFile    atomic.Value // stores string
+	TotalSize      atomic.Int64 // Size to process in the paths scanned so far
+	TotalFiles     atomic.Int64 // Files to process in the paths scanned so far
+	StartTime      time.Time
+	mu             sync.RWMutex
+	lastDetailTime time.Time
+
+	// Guarded by mu: when the last scan phase ended, and
+	// BytesProcessed at that moment.
+	processStartTime  time.Time
+	processStartBytes int64
 
 	// Upload tracking
 	CurrentUpload    atomic.Value // stores *UploadInfo
@@ -148,10 +152,36 @@ func (pr *ProgressReporter) GetStats() *ProgressStats {
 	return pr.stats
 }
 
-// SetTotalSize sets the total size to process (after scan phase)
-func (pr *ProgressReporter) SetTotalSize(size int64) {
-	pr.stats.TotalSize.Store(size)
-	pr.stats.ProcessStartTime.Store(time.Now().UTC())
+// AddTotalSize adds the size one path of the snapshot has to process to
+// the total, once that path's scan phase is done, and starts measuring
+// the processing rate again. The processed counts run across every path,
+// so the total does too. Restarting the rate keeps a path's scan phase,
+// which processes nothing, out of the rate while that path is processed.
+// During a later path's scan phase the rate is still the previous
+// path's, and falls as that scan goes on.
+func (pr *ProgressReporter) AddTotalSize(size int64) {
+	pr.stats.TotalSize.Add(size)
+
+	pr.stats.mu.Lock()
+	defer pr.stats.mu.Unlock()
+
+	pr.stats.processStartTime = time.Now().UTC()
+	pr.stats.processStartBytes = pr.stats.BytesProcessed.Load()
+}
+
+// processRate returns the bytes processed per second since the last scan
+// phase ended, or 0 before the first path's scan phase is done.
+func (s *ProgressStats) processRate() float64 {
+	s.mu.RLock()
+	defer s.mu.RUnlock()
+
+	if s.processStartTime.IsZero() {
+		return 0
+	}
+
+	processed := s.BytesProcessed.Load() - s.processStartBytes
+
+	return float64(processed) / time.Since(s.processStartTime).Seconds()
 }
 
 // Helper functions
@@ -357,19 +387,12 @@ func (pr *ProgressReporter) printSummaryStatus() {
 	// Calculate ETA if we have total size and are processing
 	etaStr := ""
 
-	if totalSize > 0 && bytesProcessed > 0 {
-		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		if ok && !processStart.IsZero() {
-			processElapsed := time.Since(processStart)
-
-			rate := float64(bytesProcessed) / processElapsed.Seconds()
-			if rate > 0 {
-				remainingBytes := totalSize - bytesProcessed
-				remainingSeconds := float64(remainingBytes) / rate
-				eta := time.Duration(remainingSeconds * float64(time.Second))
-				etaStr = " | ETA: " + formatDuration(eta)
-			}
-		}
+	processRate := pr.stats.processRate()
+	if totalSize > 0 && processRate > 0 {
+		remainingBytes := totalSize - bytesProcessed
+		remainingSeconds := float64(remainingBytes) / processRate
+		eta := time.Duration(remainingSeconds * float64(time.Second))
+		etaStr = " | ETA: " + formatDuration(eta)
 	}
 
 	rate := float64(bytesScanned+bytesSkipped) / elapsed.Seconds()
@@ -421,25 +444,18 @@ func (pr *ProgressReporter) printDetailedStatus() {
 	log.Info("Elapsed time", "duration", formatDuration(elapsed))
 
 	// Calculate and show ETA if we have data
-	if totalSize > 0 && bytesProcessed > 0 {
-		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		if ok && !processStart.IsZero() {
-			processElapsed := time.Since(processStart)
-
-			processRate := float64(bytesProcessed) / processElapsed.Seconds()
-			if processRate > 0 {
-				remainingBytes := totalSize - bytesProcessed
-				remainingSeconds := float64(remainingBytes) / processRate
-				eta := time.Duration(remainingSeconds * float64(time.Second))
-				percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
-				log.Info("Overall progress",
-					"percent", fmt.Sprintf("%.1f%%", percentComplete),
-					"processed", humanize.Bytes(safeUint64(bytesProcessed)),
-					"total", humanize.Bytes(safeUint64(totalSize)),
-					"rate", humanize.Bytes(uint64(processRate))+"/s",
-					"eta", formatDuration(eta))
-			}
-		}
+	processRate := pr.stats.processRate()
+	if totalSize > 0 && processRate > 0 {
+		remainingBytes := totalSize - bytesProcessed
+		remainingSeconds := float64(remainingBytes) / processRate
+		eta := time.Duration(remainingSeconds * float64(time.Second))
+		percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
+		log.Info("Overall progress",
+			"percent", fmt.Sprintf("%.1f%%", percentComplete),
+			"processed", humanize.Bytes(safeUint64(bytesProcessed)),
+			"total", humanize.Bytes(safeUint64(totalSize)),
+			"rate", humanize.Bytes(uint64(processRate))+"/s",
+			"eta", formatDuration(eta))
 	}
 
 	log.Info("Files processed",

internal/snapshot/progress_rate_test.go

@@ -0,0 +1,54 @@
+//nolint:testpackage // exercises the unexported processRate helper
+package snapshot
+
+import (
+	"testing"
+	"time"
+)
+
+// TestProcessRateNotLoweredByLaterScanPhase feeds the reporter two paths
+// that each take 10 seconds to process, the second after a 30-second scan
+// phase. That scan phase processes nothing, so the rate while the second
+// path is processed must be that path's own.
+func TestProcessRateNotLoweredByLaterScanPhase(t *testing.T) {
+	t.Parallel()
+
+	const (
+		pathSize       = 1000
+		processingTime = 10 * time.Second
+		scanTime       = 30 * time.Second
+	)
+
+	// Never started, but Stop releases its tickers and signal handler.
+	progress := NewProgressReporter()
+	defer progress.Stop()
+
+	stats := progress.GetStats()
+
+	// Moves the processing start time back instead of sleeping.
+	elapse := func(d time.Duration) {
+		stats.mu.Lock()
+		defer stats.mu.Unlock()
+
+		stats.processStartTime = stats.processStartTime.Add(-d)
+	}
+
+	progress.AddTotalSize(pathSize)
+	stats.BytesProcessed.Add(pathSize)
+	elapse(processingTime)
+
+	elapse(scanTime)
+	progress.AddTotalSize(pathSize)
+	stats.BytesProcessed.Add(pathSize)
+	elapse(processingTime)
+
+	want := pathSize / processingTime.Seconds()
+	got := stats.processRate()
+
+	// The test's own run time adds to the elapsed time, so got is a hair
+	// under want.
+	if got > want || got < want*0.99 {
+		t.Errorf("rate while the second path is processed is %.1f bytes/s, "+
+			"want %.1f", got, want)
+	}
+}

internal/snapshot/progress_test.go

@@ -0,0 +1,94 @@
+package snapshot_test
+
+import (
+	"context"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/spf13/afero"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/snapshot"
+)
+
+// TestProgressPercentWithSecondPathSmaller backs up two paths with one
+// scanner, as a snapshot with two paths does, the second path smaller
+// than the first. The progress line divides the bytes processed by the
+// total size, so both must count both paths to stay within 100%.
+func TestProgressPercentWithSecondPathSmaller(t *testing.T) {
+	t.Parallel()
+
+	fs := afero.NewMemMapFs()
+	files := map[string]string{
+		"/large/one.txt":   strings.Repeat("1", 4000),
+		"/large/two.txt":   strings.Repeat("2", 4000),
+		"/small/three.txt": strings.Repeat("3", 1000),
+	}
+
+	for path, content := range files {
+		err := fs.MkdirAll(filepath.Dir(path), 0755)
+		if err != nil {
+			t.Fatalf("mkdir: %v", err)
+		}
+
+		err = afero.WriteFile(fs, path, []byte(content), 0644)
+		if err != nil {
+			t.Fatalf("write %s: %v", path, err)
+		}
+	}
+
+	db, err := database.NewTestDB()
+	if err != nil {
+		t.Fatalf("create test db: %v", err)
+	}
+
+	t.Cleanup(func() {
+		cerr := db.Close()
+		if cerr != nil {
+			t.Errorf("close db: %v", cerr)
+		}
+	})
+
+	repos := database.NewRepositories(db)
+
+	scanner := snapshot.NewScanner(snapshot.ScannerConfig{
+		FS:               fs,
+		ChunkSize:        int64(1024 * 16),
+		Repositories:     repos,
+		MaxBlobSize:      int64(1024 * 1024),
+		CompressionLevel: 3,
+		AgeRecipients:    []string{testAgePublicKey},
+		EnableProgress:   true,
+	})
+
+	// Never started, but Stop releases its tickers and signal handler.
+	progress := scanner.GetProgress()
+	defer progress.Stop()
+
+	ctx := context.Background()
+	snapshotID := "test-snapshot-progress"
+	createTestSnapshotRecord(ctx, t, repos, snapshotID)
+
+	for _, path := range []string{"/large", "/small"} {
+		_, err := scanner.Scan(ctx, path, snapshotID)
+		if err != nil {
+			t.Fatalf("scanning %s: %v", path, err)
+		}
+	}
+
+	stats := progress.GetStats()
+
+	// Directories count toward the total size but produce no chunks, so
+	// the percentage ends just under 100%.
+	percent := float64(stats.BytesProcessed.Load()) /
+		float64(stats.TotalSize.Load()) * 100
+	if percent > 100 {
+		t.Errorf("progress after both paths is %.1f%%, want at most 100%%",
+			percent)
+	}
+
+	if stats.FilesProcessed.Load() != stats.TotalFiles.Load() {
+		t.Errorf("progress after both paths is %d of %d files, want all",
+			stats.FilesProcessed.Load(), stats.TotalFiles.Load())
+	}
+}

internal/snapshot/scanner.go

@@ -133,10 +133,13 @@ type ScannerConfig struct {
 
 // ScanResult contains the results of a scan operation. Files and bytes
 // are counted per file: BytesScanned is the size of the new and changed
-// files, BytesSkipped that of the unchanged ones.
+// files, BytesSkipped that of the unchanged ones. FilesFailed counts the
+// new and changed files that phase 2 could not store; FilesScanned
+// includes them and BytesScanned does not.
 type ScanResult struct {
 	FilesScanned   int
 	FilesSkipped   int
+	FilesFailed    int
 	FilesDeleted   int
 	BytesScanned   int64
 	BytesSkipped   int64
@@ -407,8 +410,8 @@ func (s *Scanner) summarizeScanPhase(
 	}
 
 	if s.progress != nil {
-		s.progress.SetTotalSize(totalSizeToProcess)
-		s.progress.GetStats().TotalFiles.Store(int64(len(filesToProcess)))
+		s.progress.AddTotalSize(totalSizeToProcess)
+		s.progress.GetStats().TotalFiles.Add(int64(len(filesToProcess)))
 	}
 
 	log.Info("Phase 1 complete",
@@ -1309,6 +1312,13 @@ func (s *Scanner) processPhase(
 
 	// Process each file
 	for _, fileToProcess := range filesToProcess {
+		// Check context cancellation
+		select {
+		case <-ctx.Done():
+			return ctx.Err()
+		default:
+		}
+
 		// Update progress
 		if s.progress != nil {
 			s.progress.GetStats().CurrentFile.Store(fileToProcess.Path)
@@ -1345,13 +1355,32 @@ func (s *Scanner) processPhase(
 	return s.finalizeProcessPhase(ctx, result)
 }
 
-// processFileWithErrorHandling wraps processFileStreaming with error recovery for
-// deleted files and skip-errors mode. Returns (skipped, error).
+// processFileWithErrorHandling records a directory or symlink, or wraps
+// processFileStreaming for a regular file with error recovery for deleted
+// files and skip-errors mode. Returns (skipped, error).
 func (s *Scanner) processFileWithErrorHandling(
 	ctx context.Context, fileToProcess *FileToProcess, result *ScanResult,
 ) (bool, error) {
+	// A directory or symlink has no data to open or read; it is only
+	// recorded in the local index. An error recording it stops the run
+	// even under --skip-errors, or the snapshot would complete without it.
+	mode := os.FileMode(fileToProcess.File.Mode)
+	if mode&os.ModeSymlink != 0 || mode.IsDir() {
+		err := s.recordNonRegularFile(ctx, fileToProcess)
+		if err != nil {
+			return false, fmt.Errorf("processing file %s: %w", fileToProcess.Path, err)
+		}
+
+		return false, nil
+	}
+
 	err := s.processFileStreaming(ctx, fileToProcess, result)
 	if err != nil {
+		// A cancelled run stops here even under --skip-errors, rather than
+		// counting this file as failed and going on to the next one.
+		if ctx.Err() != nil {
+			return false, fmt.Errorf("processing file %s: %w", fileToProcess.Path, err)
+		}
 		// A packer/database/encryption/upload failure means the chunk's data
 		// may not have been stored. Skipping the file would let the snapshot
 		// record a file whose chunk is in no blob and cannot be restored, so
@@ -1365,7 +1394,7 @@ func (s *Scanner) processFileWithErrorHandling(
 			log.Warn("File was deleted during backup, skipping",
 				"path", fileToProcess.Path)
 
-			result.FilesSkipped++
+			countFailedFile(fileToProcess, result)
 
 			return true, nil
 		}
@@ -1376,7 +1405,7 @@ func (s *Scanner) processFileWithErrorHandling(
 			s.ui.Errorf("Failed to process %s: %v. Skipping (--skip-errors).",
 				s.ui.Path(fileToProcess.Path), err)
 
-			result.FilesSkipped++
+			countFailedFile(fileToProcess, result)
 
 			return true, nil
 		}
@@ -1387,6 +1416,13 @@ func (s *Scanner) processFileWithErrorHandling(
 	return false, nil
 }
 
+// countFailedFile counts a file that phase 2 could not store as failed
+// and takes its size back out of BytesScanned, where phase 1 put it.
+func countFailedFile(fileToProcess *FileToProcess, result *ScanResult) {
+	result.FilesFailed++
+	result.BytesScanned -= fileToProcess.FileInfo.Size()
+}
+
 // printProcessingProgress prints a periodic progress line during the process phase,
 // showing files processed, bytes transferred, throughput, and ETA
 func (s *Scanner) printProcessingProgress(
@@ -1755,16 +1791,11 @@ func (e *packerError) Error() string { return e.err.Error() }
 
 func (e *packerError) Unwrap() error { return e.err }
 
-// processFileStreaming processes a file by streaming chunks directly to the packer
+// processFileStreaming processes a regular file by streaming chunks directly
+// to the packer
 func (s *Scanner) processFileStreaming(
 	ctx context.Context, fileToProcess *FileToProcess, result *ScanResult,
 ) error {
-	// Symlinks and directories have no data to chunk — just record them in the DB.
-	mode := os.FileMode(fileToProcess.File.Mode)
-	if mode&os.ModeSymlink != 0 || mode.IsDir() {
-		return s.recordNonRegularFile(ctx, fileToProcess)
-	}
-
 	file, err := s.fs.Open(fileToProcess.Path)
 	if err != nil {
 		return fmt.Errorf("opening file: %w", wrapPermissionError(fileToProcess.Path, err))

internal/snapshot/skip_errors_test.go

@@ -82,6 +82,32 @@ func (f *readFailFs) Open(name string) (afero.File, error) {
 	return file, nil
 }
 
+// cancelOnOpenFs cancels the run when the scanner opens the target file to
+// back it up, as Ctrl-C partway through processing would, and records each
+// file opened after that.
+type cancelOnOpenFs struct {
+	afero.Fs
+
+	target            string
+	cancel            context.CancelFunc
+	cancelled         bool
+	openedAfterCancel []string
+}
+
+//nolint:ireturn // afero.Fs.Open is defined to return the interface.
+func (f *cancelOnOpenFs) Open(name string) (afero.File, error) {
+	if f.cancelled {
+		f.openedAfterCancel = append(f.openedAfterCancel, name)
+	}
+
+	if name == f.target {
+		f.cancel()
+		f.cancelled = true
+	}
+
+	return f.Fs.Open(name)
+}
+
 // linkRemovedAfterLstatFs is the real filesystem, except that the symlink at
 // target is removed right after the walk lstats it, as happens when a link is
 // deleted during a backup. The scanner's readlink of it then fails.
@@ -128,15 +154,16 @@ func writeSkipErrorTestFile(t *testing.T, fs afero.Fs, path, content string) {
 	}
 }
 
-// runSkipErrorScan scans source on fs with the given skip-errors setting,
-// printing user-facing messages to uiw (nil discards them), and returns the
-// repositories (for inspection) and the scan error.
+// runSkipErrorScan scans source on fs under ctx with the given skip-errors
+// setting, printing user-facing messages to uiw (nil discards them), and
+// returns the repositories (for inspection) and the scan error.
 func runSkipErrorScan(
-	t *testing.T, fs afero.Fs, source string, skipErrors bool, uiw *ui.Writer,
+	ctx context.Context, t *testing.T, fs afero.Fs, source string,
+	skipErrors bool, uiw *ui.Writer,
 ) (*database.Repositories, error) {
 	t.Helper()
 
-	db, err := database.NewTestDB()
+	db, err := database.New(ctx, ":memory:")
 	if err != nil {
 		t.Fatalf("create test db: %v", err)
 	}
@@ -161,7 +188,6 @@ func runSkipErrorScan(
 		SkipErrors:       skipErrors,
 	})
 
-	ctx := context.Background()
 	snapshotID := "test-snapshot-skip-errors"
 	createTestSnapshotRecord(ctx, t, repos, snapshotID)
 
@@ -185,7 +211,7 @@ func TestScannerPackingFailureAbortsUnderSkipErrors(t *testing.T) {
 	writeSkipErrorTestFile(t, fs, "/source/file1.txt", "first file content")
 	writeSkipErrorTestFile(t, fs, "/source/file2.txt", "second file content")
 
-	repos, err := runSkipErrorScan(t, fs, "/source", true, nil)
+	repos, err := runSkipErrorScan(context.Background(), t, fs, "/source", true, nil)
 	if err == nil {
 		t.Fatal("expected scan to abort on the packer error, got nil")
 	}
@@ -212,7 +238,7 @@ func TestScannerReadErrorAbortsWithoutSkipErrors(t *testing.T) {
 	fs := &readFailFs{Fs: afero.NewMemMapFs(), target: target}
 	writeSkipErrorTestFile(t, fs, target, "content that cannot be read")
 
-	_, err := runSkipErrorScan(t, fs, "/source", false, nil)
+	_, err := runSkipErrorScan(context.Background(), t, fs, "/source", false, nil)
 	if err == nil {
 		t.Fatal("expected scan to fail on the read error, got nil")
 	}
@@ -228,7 +254,7 @@ func TestScannerReadErrorSkippedWithSkipErrors(t *testing.T) {
 	fs := &readFailFs{Fs: afero.NewMemMapFs(), target: target}
 	writeSkipErrorTestFile(t, fs, target, "content that cannot be read")
 
-	repos, err := runSkipErrorScan(t, fs, "/source", true, nil)
+	repos, err := runSkipErrorScan(context.Background(), t, fs, "/source", true, nil)
 	if err != nil {
 		t.Fatalf("expected scan to complete with --skip-errors, got %v", err)
 	}
@@ -267,7 +293,7 @@ func TestScannerUnreadableSymlinkAbortsWithoutSkipErrors(t *testing.T) {
 	sourceDir, linkPath := writeSymlinkSource(t)
 	fs := &linkRemovedAfterLstatFs{t: t, target: linkPath}
 
-	_, err := runSkipErrorScan(t, fs, sourceDir, false, nil)
+	_, err := runSkipErrorScan(context.Background(), t, fs, sourceDir, false, nil)
 	if !errors.Is(err, os.ErrNotExist) {
 		t.Fatalf("expected scan to fail on the removed symlink, got %v", err)
 	}
@@ -283,7 +309,7 @@ func TestScannerUnreadableSymlinkSkippedWithSkipErrors(t *testing.T) {
 	fs := &linkRemovedAfterLstatFs{t: t, target: linkPath}
 	uiw := ui.NewWithColor(io.Discard, false)
 
-	repos, err := runSkipErrorScan(t, fs, sourceDir, true, uiw)
+	repos, err := runSkipErrorScan(context.Background(), t, fs, sourceDir, true, uiw)
 	if err != nil {
 		t.Fatalf("expected scan to complete with --skip-errors, got %v", err)
 	}
@@ -302,3 +328,56 @@ func TestScannerUnreadableSymlinkSkippedWithSkipErrors(t *testing.T) {
 		t.Fatalf("expected %s not to be recorded", linkPath)
 	}
 }
+
+// TestScannerCancelStopsSkipErrorsRun checks that a --skip-errors backup
+// cancelled partway through processing returns the cancellation error,
+// opens no further file, and reports no file as failed.
+func TestScannerCancelStopsSkipErrorsRun(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name          string
+		targetContent string
+	}{
+		// The cancellation lands while the target is being read.
+		{name: "while reading a file", targetContent: "first file content"},
+		// An empty target has no chunks, so the cancellation goes unnoticed
+		// until the run moves on to the next file.
+		{name: "between files", targetContent: ""},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			const target = "/source/a.txt"
+
+			ctx, cancel := context.WithCancel(context.Background())
+			defer cancel()
+
+			fs := &cancelOnOpenFs{
+				Fs: afero.NewMemMapFs(), target: target, cancel: cancel,
+			}
+			writeSkipErrorTestFile(t, fs, target, tt.targetContent)
+			writeSkipErrorTestFile(t, fs, "/source/b.txt", "second file content")
+			writeSkipErrorTestFile(t, fs, "/source/c.txt", "third file content")
+
+			uiw := ui.NewWithColor(io.Discard, false)
+
+			_, err := runSkipErrorScan(ctx, t, fs, "/source", true, uiw)
+			if !errors.Is(err, context.Canceled) {
+				t.Fatalf("expected the cancellation error, got %v", err)
+			}
+
+			if len(fs.openedAfterCancel) != 0 {
+				t.Fatalf("expected no file opened after the cancellation, got %v",
+					fs.openedAfterCancel)
+			}
+
+			if uiw.ErrorCount() != 0 {
+				t.Fatalf("expected no file reported as failed, got %d error lines",
+					uiw.ErrorCount())
+			}
+		})
+	}
+}

internal/snapshot/snapshot.go

@@ -892,7 +892,7 @@ func (sm *SnapshotManager) getFileSize(path string) int64 {
 // BackupStats contains statistics from a backup operation
 type BackupStats struct {
 	FilesScanned  int
-	TotalSize     int64 // Total size of all files examined
+	TotalSize     int64 // Total size of the files in the snapshot
 	ChunksCreated int
 	BlobsCreated  int
 	BytesUploaded int64

internal/storage/faultstore/faultstore.go

@@ -1,15 +1,16 @@
 // Package faultstore provides a storage.Storer wrapper that injects
 // faults on demand, so tests can reproduce the failure modes a real
 // backend exhibits: an upload that fails partway, a backend that reports
-// success while storing nothing, and reads that return corrupt or
-// truncated bytes. It is the seam called for by the fault-injection
-// tests (sneak/vaultik issue 72) and is meant to be reused by future
-// tests rather than re-implemented per case.
+// success while storing nothing, reads that return corrupt or truncated
+// bytes, and a delete the backend refuses. It is the seam called for by
+// the fault-injection tests (sneak/vaultik issue 72) and is meant to be
+// reused by future tests rather than re-implemented per case.
 //
-// The wrapper delegates every method to the inner Storer. Two hooks
-// change that: OnPut decides the fate of each write, and OnGet decides
-// how each read's bytes are returned. Both are keyed by the object key,
-// so a test can fault only blobs, only metadata, or a single object.
+// The wrapper delegates every method to the inner Storer. Three hooks
+// change that: OnPut decides the fate of each write, OnGet decides how
+// each read's bytes are returned, and OnDelete decides whether each
+// delete fails. All are keyed by the object key, so a test can fault
+// only blobs, only metadata, or a single object.
 package faultstore
 
 import (
@@ -25,6 +26,10 @@ import (
 // ErrInjectedUpload is returned by a Put the OnPut hook chose to fail.
 var ErrInjectedUpload = errors.New("faultstore: injected upload failure")
 
+// ErrInjectedDelete is returned by a Delete the OnDelete hook chose to
+// fail.
+var ErrInjectedDelete = errors.New("faultstore: injected delete failure")
+
 // PutAction is the disposition OnPut assigns to a write.
 type PutAction int
 
@@ -66,6 +71,11 @@ type Storer struct {
 	// OnGet, when set, is consulted for every Get with the object key
 	// and damages the returned bytes accordingly.
 	OnGet func(key string) GetFault
+
+	// OnDelete, when set, is consulted before every Delete with the
+	// object key. Returning true fails the delete and leaves the object
+	// in place.
+	OnDelete func(key string) bool
 }
 
 // New wraps inner. inner must be non-nil.
@@ -154,8 +164,12 @@ func (f *Storer) Stat(ctx context.Context, key string) (*storage.ObjectInfo, err
 	return f.inner.Stat(ctx, key)
 }
 
-// Delete delegates unchanged.
+// Delete removes the object unless OnDelete fails the delete.
 func (f *Storer) Delete(ctx context.Context, key string) error {
+	if f.OnDelete != nil && f.OnDelete(key) {
+		return fmt.Errorf("%w for %q", ErrInjectedDelete, key)
+	}
+
 	return f.inner.Delete(ctx, key)
 }
 
@@ -171,6 +185,11 @@ func (f *Storer) ListStream(
 	return f.inner.ListStream(ctx, prefix)
 }
 
+// DeletePartialUploads delegates unchanged.
+func (f *Storer) DeletePartialUploads(ctx context.Context, prefix string) error {
+	return f.inner.DeletePartialUploads(ctx, prefix)
+}
+
 // Info delegates unchanged.
 func (f *Storer) Info() storage.Info {
 	return f.inner.Info()

internal/storage/file.go

@@ -242,6 +242,42 @@ func (f *FileStorer) ListStream(ctx context.Context, prefix string) <-chan Objec
 	return ch
 }
 
+// DeletePartialUploads removes every file under prefix whose name ends in
+// tempSuffix. A missing prefix has none to remove.
+func (f *FileStorer) DeletePartialUploads(ctx context.Context, prefix string) error {
+	basePath := f.fullPath(prefix)
+
+	exists, err := afero.Exists(f.fs, basePath)
+	if err != nil {
+		return fmt.Errorf("checking path: %w", err)
+	}
+
+	if !exists {
+		return nil
+	}
+
+	err = afero.Walk(f.fs, basePath, func(path string, info os.FileInfo, err error) error {
+		if err != nil {
+			return err
+		}
+
+		if ctx.Err() != nil {
+			return ctx.Err()
+		}
+
+		if info.IsDir() || !strings.HasSuffix(info.Name(), tempSuffix) {
+			return nil
+		}
+
+		return f.fs.Remove(path)
+	})
+	if err != nil {
+		return fmt.Errorf("walking directory: %w", err)
+	}
+
+	return nil
+}
+
 // Info returns human-readable storage location information.
 func (f *FileStorer) Info() Info {
 	return Info{

internal/storage/file_atomic_test.go

@@ -120,3 +120,45 @@ func TestFileStorer_ListSkipsPartialFiles(t *testing.T) {
 		t.Fatalf("ListStream should return only the real key, got %v", streamed)
 	}
 }
+
+// TestFileStorer_DeletePartialUploads checks that a leftover temp file is
+// removed and the object at the real key is kept.
+func TestFileStorer_DeletePartialUploads(t *testing.T) {
+	t.Parallel()
+
+	base := t.TempDir()
+
+	f, err := storage.NewFileStorer(base)
+	if err != nil {
+		t.Fatalf("NewFileStorer: %v", err)
+	}
+
+	ctx := context.Background()
+
+	err = f.Put(ctx, testBlobKey, strings.NewReader("blob-bytes"))
+	if err != nil {
+		t.Fatalf("Put: %v", err)
+	}
+
+	leftover := filepath.Join(base, testBlobKey+"-123456.partial")
+
+	err = os.WriteFile(leftover, []byte("half"), 0o600)
+	if err != nil {
+		t.Fatalf("writing leftover temp file: %v", err)
+	}
+
+	err = f.DeletePartialUploads(ctx, "blobs/")
+	if err != nil {
+		t.Fatalf("DeletePartialUploads: %v", err)
+	}
+
+	_, err = os.Stat(leftover)
+	if !os.IsNotExist(err) {
+		t.Errorf("leftover temp file was not removed: %v", err)
+	}
+
+	_, err = f.Stat(ctx, testBlobKey)
+	if err != nil {
+		t.Errorf("Stat of the real key: %v", err)
+	}
+}

internal/storage/rclone.go

@@ -213,6 +213,31 @@ func (r *RcloneStorer) ListStream(
 	return ch
 }
 
+// DeletePartialUploads removes every object under prefix whose name ends
+// in tempSuffix.
+func (r *RcloneStorer) DeletePartialUploads(ctx context.Context, prefix string) error {
+	var partial []fs.Object
+
+	err := operations.ListFn(ctx, r.fsys, func(obj fs.Object) {
+		key := obj.Remote()
+		if strings.HasPrefix(key, prefix) && strings.HasSuffix(key, tempSuffix) {
+			partial = append(partial, obj)
+		}
+	})
+	if err != nil {
+		return fmt.Errorf("listing objects: %w", err)
+	}
+
+	for _, obj := range partial {
+		err = obj.Remove(ctx)
+		if err != nil {
+			return fmt.Errorf("removing object: %w", err)
+		}
+	}
+
+	return nil
+}
+
 // Info returns human-readable storage location information.
 func (r *RcloneStorer) Info() Info {
 	location := r.remote

internal/storage/rclone_test.go

@@ -198,6 +198,47 @@ func TestRcloneStorerListSkipsPartialFiles(t *testing.T) {
 	}
 }
 
+// TestRcloneStorerDeletePartialUploads checks that a temporary file left
+// by a killed upload is removed and the object at the real key is kept.
+//
+//nolint:paralleltest // NewRcloneStorer installs the process-global rclone config
+func TestRcloneStorerDeletePartialUploads(t *testing.T) {
+	dir := t.TempDir()
+	ctx := context.Background()
+
+	s, err := storage.NewRcloneStorer(ctx, ":local", dir)
+	if err != nil {
+		t.Fatalf("NewRcloneStorer: %v", err)
+	}
+
+	err = s.Put(ctx, testBlobKey, strings.NewReader("blob-bytes"))
+	if err != nil {
+		t.Fatalf("Put: %v", err)
+	}
+
+	leftover := filepath.Join(dir, testBlobKey+"-123456.partial")
+
+	err = os.WriteFile(leftover, []byte("half"), 0o600)
+	if err != nil {
+		t.Fatalf("writing leftover temp file: %v", err)
+	}
+
+	err = s.DeletePartialUploads(ctx, "blobs/")
+	if err != nil {
+		t.Fatalf("DeletePartialUploads: %v", err)
+	}
+
+	_, err = os.Stat(leftover)
+	if !os.IsNotExist(err) {
+		t.Errorf("leftover temp file was not removed: %v", err)
+	}
+
+	_, err = s.Stat(ctx, testBlobKey)
+	if err != nil {
+		t.Errorf("Stat of the real key: %v", err)
+	}
+}
+
 // newRcloneStorerOnWrappedLocal registers name as rclone's local backend
 // wrapped by wrap, and builds an rclone backend on it rooted at a fresh
 // temp directory. wrap changes the features the local backend reports, so

internal/storage/s3.go

@@ -99,6 +99,12 @@ func (s *S3Storer) ListStream(ctx context.Context, prefix string) <-chan ObjectI
 	return ch
 }
 
+// DeletePartialUploads has nothing to remove: S3 shows an object only once
+// its upload has completed, so an upload cut off part-way leaves none.
+func (s *S3Storer) DeletePartialUploads(_ context.Context, _ string) error {
+	return nil
+}
+
 // Info returns human-readable storage location information.
 func (s *S3Storer) Info() Info {
 	return Info{

internal/storage/storer.go

@@ -71,6 +71,12 @@ type Storer interface {
 	// If an error occurs during listing, the final item will have Err set.
 	ListStream(ctx context.Context, prefix string) <-chan ObjectInfo
 
+	// DeletePartialUploads removes every object under prefix that an
+	// upload cut off part-way left under a temporary name ending in
+	// `.partial`. The file and rclone backends' List and ListStream skip
+	// such an object.
+	DeletePartialUploads(ctx context.Context, prefix string) error
+
 	// Info returns human-readable storage location information.
 	Info() Info
 }

internal/vaultik/destination_validation_test.go

@@ -257,6 +257,10 @@ func (s *stubLister) List(_ context.Context, _ string) ([]string, error) {
 	return nil, errStubUnused
 }
 
+func (s *stubLister) DeletePartialUploads(_ context.Context, _ string) error {
+	return errStubUnused
+}
+
 func (s *stubLister) Info() storage.Info {
 	return storage.Info{}
 }

internal/vaultik/helpers.go

@@ -3,6 +3,7 @@ package vaultik
 import (
 	"errors"
 	"fmt"
+	"math"
 	"regexp"
 	"strconv"
 	"strings"
@@ -47,6 +48,10 @@ const (
 	year  = 365 * day
 )
 
+// maxDuration is the largest value a time.Duration can hold, about 292
+// years.
+const maxDuration = time.Duration(math.MaxInt64)
+
 // A snapshot ID split on "_" has at least a hostname and a trailing
 // timestamp.
 const minSnapshotIDParts = 2
@@ -145,10 +150,10 @@ func parseSnapshotName(snapshotID, hostname string) string {
 // parseDuration parses a duration string with support for human-friendly units:
 // d/day/days, w/week/weeks, mo/month/months, y/year/years, plus standard Go
 // duration units. Following Go, m is minutes and mo is months. A bare number,
-// an unknown unit, and a negative value are all rejected. Outside the Go
-// units the input must be whole numbers each followed directly by a unit
-// (2w3d), so 1.0y and 30 days are errors; decimals work only in Go units
-// (1.5h).
+// an unknown unit, a negative value, and a total longer than maxDuration are
+// all rejected. Outside the Go units the input must be whole numbers each
+// followed directly by a unit (2w3d), so 1.0y and 30 days are errors;
+// decimals work only in Go units (1.5h).
 func parseDuration(s string) (time.Duration, error) {
 	if strings.HasPrefix(strings.TrimSpace(s), "-") {
 		return 0, errNegativeDuration
@@ -181,19 +186,30 @@ func parseDuration(s string) (time.Duration, error) {
 			return 0, fmt.Errorf("invalid number %q: %w", match[1], err)
 		}
 
+		var unitLength time.Duration
+
 		unit := strings.ToLower(match[2])
 		switch unit {
 		case "d", "day", "days":
-			total += time.Duration(n) * day
+			unitLength = day
 		case "w", "week", "weeks":
-			total += time.Duration(n) * week
+			unitLength = week
 		case "mo", "month", "months":
-			total += time.Duration(n) * month
+			unitLength = month
 		case "y", "year", "years":
-			total += time.Duration(n) * year
+			unitLength = year
 		default:
 			return 0, fmt.Errorf("%w %q", errUnknownTimeUnit, unit)
 		}
+
+		// Past maxDuration the sum wraps to a negative value, which would
+		// put the purge cutoff in the future.
+		if time.Duration(n) > (maxDuration-total)/unitLength {
+			return 0, fmt.Errorf("%w: %q is longer than about 292 years",
+				errInvalidDuration, s)
+		}
+
+		total += time.Duration(n) * unitLength
 	}
 
 	return total, nil

internal/vaultik/helpers_test.go

@@ -111,6 +111,17 @@ func TestParseDuration(t *testing.T) {
 		{"30 days", 0, true},
 		{"30 days ago", 0, true},
 		{"x7d", 0, true},
+		// The largest time.Duration is about 292 years. A larger value
+		// must be rejected, not wrapped to a negative one, which would
+		// put the cutoff in the future and select every snapshot.
+		{"292y", 292 * 365 * 24 * time.Hour, false},
+		{"293y", 0, true},
+		{"3559mo", 0, true},
+		{"15251w", 0, true},
+		{"106752d", 0, true},
+		{"2562048h", 0, true},
+		{"200y200y", 0, true},
+		{"292y6mo", 0, true},
 	}
 
 	for _, tt := range tests {

internal/vaultik/info.go

@@ -181,8 +181,11 @@ type SnapshotMetadataInfo struct {
 	ManifestSize int64  `json:"manifest_size"`
 	DatabaseSize int64  `json:"database_size"`
 	TotalSize    int64  `json:"total_size"`
-	BlobCount    int    `json:"blob_count"`
-	BlobsSize    int64  `json:"blobs_size"`
+
+	// Both stay nil (null in the JSON) when the snapshot's manifest was
+	// listed but could not be read.
+	BlobCount *int   `json:"blob_count"`
+	BlobsSize *int64 `json:"blobs_size"`
 
 	// Set when the listing holds this snapshot's manifest.json.zst. A
 	// backup interrupted before its manifest upload leaves a directory
@@ -380,6 +383,10 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 	for _, snapshotID := range snapshotIDs {
 		info := snapshotMetadata[snapshotID]
 		if !info.hasManifest {
+			// The orphan figures count this directory's blobs as
+			// orphaned, so it references none.
+			info.BlobCount, info.BlobsSize = new(int), new(int64)
+
 			continue
 		}
 
@@ -395,7 +402,7 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 			continue
 		}
 
-		info.BlobCount = manifest.BlobCount
+		blobCount := manifest.BlobCount
 
 		var blobsSize int64
 
@@ -404,7 +411,8 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 			blobsSize += blob.CompressedSize
 		}
 
-		info.BlobsSize = blobsSize
+		info.BlobCount = &blobCount
+		info.BlobsSize = &blobsSize
 	}
 
 	return referencedBlobs, unreadable
@@ -516,13 +524,23 @@ func (v *Vaultik) printRemoteInfoTable(result *RemoteInfoResult) {
 		v.stdoutf("%s", separator)
 
 		for _, info := range result.Snapshots {
+			blobCount := unknownText
+			if info.BlobCount != nil {
+				blobCount = humanize.Comma(int64(*info.BlobCount))
+			}
+
+			blobsSize := unknownText
+			if info.BlobsSize != nil {
+				blobsSize = ubytes(*info.BlobsSize)
+			}
+
 			v.stdoutf(rowFormat,
 				truncateString(info.SnapshotID, snapshotIDColWidth),
 				ubytes(info.ManifestSize),
 				ubytes(info.DatabaseSize),
 				ubytes(info.TotalSize),
-				humanize.Comma(int64(info.BlobCount)),
-				ubytes(info.BlobsSize),
+				blobCount,
+				blobsSize,
 			)
 		}
 

internal/vaultik/integration_test.go

@@ -155,6 +155,12 @@ func (m *MockStorer) ListStream(
 	return ch
 }
 
+// DeletePartialUploads has nothing to remove: Put stores each object
+// under its key at once.
+func (m *MockStorer) DeletePartialUploads(_ context.Context, _ string) error {
+	return nil
+}
+
 func (m *MockStorer) Info() storage.Info {
 	return storage.Info{
 		Type:     "mock",

internal/vaultik/nuke_remote_test.go

@@ -0,0 +1,144 @@
+package vaultik_test
+
+import (
+	"context"
+	"io/fs"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/snapshot"
+	"sneak.berlin/go/vaultik/internal/storage/faultstore"
+)
+
+// TestNukeRemoteLeavesNoFiles checks that remote nuke leaves no file
+// under a file:// destination, including the `.partial` files uploads
+// killed part-way leave next to a snapshot's metadata and next to where a
+// blob would have been.
+func TestNukeRemoteLeavesNoFiles(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, repos, out := backUpToFileDestination(ctx, t, storeDir)
+
+	snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
+	require.NoError(t, err)
+	require.Len(t, snapshots, 1)
+
+	snapshotKey := snapshot.RemoteSnapshotKey(snapshots[0].ID.String())
+	hash := testBlobHashA
+	leftovers := []string{
+		filepath.Join(storeDir, "metadata", snapshotKey,
+			"db.zst.age-123456.partial"),
+		filepath.Join(storeDir, "blobs", hash[:2], hash[2:4],
+			hash+"-123456.partial"),
+	}
+
+	for _, leftover := range leftovers {
+		require.NoError(t, os.MkdirAll(filepath.Dir(leftover), 0o750))
+		require.NoError(t, os.WriteFile(leftover, []byte("half an upload"), 0o600))
+	}
+
+	require.NoError(t, v.NukeRemote(true))
+
+	var files []string
+
+	err = filepath.WalkDir(storeDir,
+		func(path string, entry fs.DirEntry, err error) error {
+			if err != nil {
+				return err
+			}
+
+			if !entry.IsDir() {
+				files = append(files, path)
+			}
+
+			return nil
+		})
+	require.NoError(t, err)
+	assert.Empty(t, files)
+
+	// Nuke deletes the blobs itself, so advice to run prune is wrong.
+	assert.Contains(t, out.String(), "Backup destination store is now empty.")
+	assert.NotContains(t, out.String(), "vaultik prune")
+}
+
+// TestNukeRemoteFailsWhenADeleteFails checks that remote nuke returns an
+// error when a snapshot's metadata or a blob cannot be deleted, does not
+// report the store empty, and advises running nuke again: prune deletes
+// no metadata.
+func TestNukeRemoteFailsWhenADeleteFails(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	for _, refusedPrefix := range []string{"metadata/", "blobs/"} {
+		t.Run(refusedPrefix, func(t *testing.T) {
+			t.Parallel()
+
+			ctx := context.Background()
+			storeDir := filepath.Join(t.TempDir(), "store")
+			v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+			store := faultstore.New(v.Storage)
+			store.OnDelete = func(key string) bool {
+				return strings.HasPrefix(key, refusedPrefix)
+			}
+			v.Storage = store
+
+			require.Error(t, v.NukeRemote(true))
+
+			assert.NotContains(t, out.String(), "now empty")
+			assert.Contains(t, out.String(), "vaultik remote nuke --force")
+			assert.NotContains(t, out.String(), "vaultik prune")
+		})
+	}
+}
+
+// TestNukeRemoteRefusesAnotherDestinationWithoutRetryAdvice checks that
+// remote nuke, when the local index belongs to a different destination
+// than the configured one, fails without advising to run nuke again:
+// that run would fail the same way.
+func TestNukeRemoteRefusesAnotherDestinationWithoutRetryAdvice(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+	v.Config.StorageURL = "file://" + filepath.Join(t.TempDir(), "elsewhere")
+
+	err := v.NukeRemote(true)
+
+	require.ErrorContains(t, err, "bound to a different backup destination")
+	assert.NotContains(t, out.String(), "vaultik remote nuke --force")
+}
+
+// TestNukeRemoteFailsWhenALocalSnapshotCannotBeRemoved checks that a
+// snapshot remote nuke cannot remove from the local index fails the
+// run: nuke then leaves that snapshot's metadata on the destination
+// store.
+func TestNukeRemoteFailsWhenALocalSnapshotCannotBeRemoved(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+	_, err := v.DB.Conn().ExecContext(ctx, `
+		CREATE TRIGGER refuse_snapshot_delete BEFORE DELETE ON snapshots
+		BEGIN SELECT RAISE(ABORT, 'simulated index error'); END`)
+	require.NoError(t, err)
+
+	require.Error(t, v.NukeRemote(true))
+
+	assert.NotContains(t, out.String(), "now empty")
+	assert.Contains(t, out.String(), "vaultik remote nuke --force")
+}

internal/vaultik/prune.go

@@ -19,13 +19,22 @@ type PruneOptions struct {
 var errNukeRequiresForce = errors.New(
 	"nuke requires --force (this deletes ALL remote snapshots and blobs)")
 
+// errBlobDeleteFailed reports unreferenced blobs prune could not delete.
+var errBlobDeleteFailed = errors.New("blob(s) could not be deleted")
+
+// nukeCommandHint is the command suggested when a remote nuke could not
+// delete everything: running it again deletes what is left, which
+// `vaultik prune` does not do for snapshot metadata.
+const nukeCommandHint = "vaultik remote nuke --force"
+
 // metadataDirName is the top-level remote directory holding snapshot
 // metadata.
 const metadataDirName = "metadata"
 
 // NukeRemote deletes every snapshot's metadata and every blob from remote
-// storage. After this returns successfully the bucket prefix is empty and
-// the next backup starts from scratch.
+// storage, along with any object an upload cut off part-way left under a
+// temporary `.partial` name. After this returns successfully the bucket
+// prefix is empty and the next backup starts from scratch.
 //
 // Refuses to run unless force is true. The caller is responsible for
 // confirming with the user.
@@ -34,6 +43,29 @@ func (v *Vaultik) NukeRemote(force bool) error {
 		return errNukeRequiresForce
 	}
 
+	// Checked before anything is deleted: running nuke again would fail
+	// the same way, so the advice below must not follow this error.
+	err := v.EnsureStorageBinding()
+	if err != nil {
+		return err
+	}
+
+	err = v.emptyDestinationStore()
+	if err != nil {
+		v.UI.Warningf("Run '%s' again to delete what is left on the "+
+			"backup destination store.", nukeCommandHint)
+
+		return err
+	}
+
+	v.UI.Completef("Backup destination store is now empty.")
+
+	return nil
+}
+
+// emptyDestinationStore does the deleting for NukeRemote and stops at
+// the first step that fails.
+func (v *Vaultik) emptyDestinationStore() error {
 	v.UI.Beginf("Removing all snapshot metadata from backup destination store.")
 
 	_, err := v.RemoveAllSnapshots(&RemoveOptions{Force: true})
@@ -48,7 +80,14 @@ func (v *Vaultik) NukeRemote(force bool) error {
 		return fmt.Errorf("pruning blobs: %w", err)
 	}
 
-	v.UI.Completef("Backup destination store is now empty.")
+	// The file and rclone listings skip `.partial` objects, so the two
+	// steps above never delete them.
+	for _, prefix := range []string{"metadata/", "blobs/"} {
+		err = v.Storage.DeletePartialUploads(v.ctx, prefix)
+		if err != nil {
+			return fmt.Errorf("deleting partial uploads: %w", err)
+		}
+	}
 
 	return nil
 }
@@ -152,14 +191,17 @@ func (v *Vaultik) PruneBlobs(opts *PruneOptions) error {
 	v.deleteUnreferencedBlobs(unreferencedBlobs, allBlobs, result)
 
 	if opts.JSON {
-		return v.outputPruneBlobsJSON(result)
+		err = v.outputPruneBlobsJSON(result)
+		if err != nil {
+			return err
+		}
+	} else {
+		v.stdoutf("\nDeleted %d blob(s) totaling %s\n",
+			result.BlobsDeleted, ubytes(result.BytesFreed))
 	}
 
-	v.stdoutf("\nDeleted %d blob(s) totaling %s\n",
-		result.BlobsDeleted, ubytes(result.BytesFreed))
-
 	if result.BlobsFailed > 0 {
-		v.stdoutf("Failed to delete %d blob(s)\n", result.BlobsFailed)
+		return fmt.Errorf("%d %w", result.BlobsFailed, errBlobDeleteFailed)
 	}
 
 	return nil

internal/vaultik/prune_count_test.go

@@ -42,7 +42,7 @@ func TestTableCountForReportSurfacesReadFailure(t *testing.T) {
 	assert.Nil(t, missing, "a failed read is unknown, not a count")
 
 	// The rendered count for a failed read must say unknown, never 0.
-	assert.Equal(t, countUnknown, countText(missing))
+	assert.Equal(t, unknownText, countText(missing))
 	assert.NotEqual(t, "0", countText(missing))
 }
 
@@ -57,7 +57,7 @@ func TestCountTextDistinguishesEmptyFromUnknown(t *testing.T) {
 
 	assert.Equal(t, "0", countText(&zero))
 	assert.Equal(t, "7", countText(&seven))
-	assert.Equal(t, countUnknown, countText(nil))
+	assert.Equal(t, unknownText, countText(nil))
 }
 
 // TestCountDiffUnknownWhenEitherSideUnknown checks that a delta computed

internal/vaultik/prune_delete_failure_test.go

@@ -0,0 +1,98 @@
+package vaultik_test
+
+import (
+	"context"
+	"encoding/json"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage/faultstore"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// refuseBlobDeletes is an OnDelete hook that fails every blob delete.
+func refuseBlobDeletes(key string) bool {
+	return strings.HasPrefix(key, "blobs/")
+}
+
+// TestPruneBlobs_FailedDeleteReturnsError checks that prune returns an
+// error, so the command exits non-zero, when an unreferenced blob cannot
+// be deleted.
+func TestPruneBlobs_FailedDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+
+	// The store holds no manifest, so nothing references this blob.
+	addBlob(t, env.store.testStorer, testBlobHashA)
+
+	store := faultstore.New(env.store)
+	store.OnDelete = refuseBlobDeletes
+	env.v.Storage = store
+
+	err := env.v.PruneBlobs(&vaultik.PruneOptions{Force: true})
+
+	require.ErrorContains(t, err, "1 blob(s) could not be deleted")
+}
+
+// TestPruneBlobs_JSONFailedDeleteReturnsError checks that prune --json
+// prints its document and then returns an error when an unreferenced
+// blob cannot be deleted.
+func TestPruneBlobs_JSONFailedDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+	addBlob(t, env.store.testStorer, testBlobHashA)
+
+	store := faultstore.New(env.store)
+	store.OnDelete = refuseBlobDeletes
+	env.v.Storage = store
+
+	err := env.v.PruneBlobs(&vaultik.PruneOptions{JSON: true})
+
+	require.Error(t, err, "prune must fail when a blob cannot be deleted")
+
+	var result vaultik.PruneBlobsResult
+
+	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &result),
+		"stdout must hold the JSON document, got:\n%s", env.stdout.String())
+	assert.Equal(t, 1, result.BlobsFailed)
+	assert.Equal(t, 0, result.BlobsDeleted)
+}
+
+// TestCreateSnapshotPrune_FailedBlobDeleteReturnsError checks that the
+// prune step of snapshot create --prune fails the run when an
+// unreferenced blob cannot be deleted.
+func TestCreateSnapshotPrune_FailedBlobDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, _ := backUpToFileDestination(ctx, t, storeDir)
+
+	// No snapshot references this blob, so the prune step deletes it.
+	orphan := filepath.Join(storeDir, "blobs", testBlobHashA[:2],
+		testBlobHashA[2:4], testBlobHashA)
+	require.NoError(t, os.MkdirAll(filepath.Dir(orphan), 0o750))
+	require.NoError(t, os.WriteFile(orphan, []byte("orphan"), 0o600))
+
+	store := faultstore.New(v.Storage)
+	store.OnDelete = refuseBlobDeletes
+	v.Storage = store
+
+	err := v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
+		Cron:  true,
+		Prune: true,
+	})
+
+	require.ErrorContains(t, err, "1 blob(s) could not be deleted")
+	assert.FileExists(t, orphan)
+}

internal/vaultik/prune_json_test.go

@@ -0,0 +1,40 @@
+package vaultik_test
+
+import (
+	"encoding/json"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// TestPruneBlobs_JSONDeletesWithoutAsking checks that prune with --json
+// and without --force deletes an unreferenced blob without the
+// confirmation prompt. Stdin is empty, so a prompt would read no answer
+// and cancel, and its text would come before the JSON document.
+func TestPruneBlobs_JSONDeletesWithoutAsking(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+
+	// The store holds no manifest, so nothing references this blob.
+	addBlob(t, env.store.testStorer, testBlobHashA)
+
+	err := env.v.PruneBlobs(&vaultik.PruneOptions{JSON: true})
+	require.NoError(t, err)
+
+	blobKey := "blobs/" + testBlobHashA[:2] + "/" + testBlobHashA[2:4] +
+		"/" + testBlobHashA
+	assert.False(t, env.store.hasKey(blobKey),
+		"the unreferenced blob must be deleted")
+
+	var result vaultik.PruneBlobsResult
+
+	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &result),
+		"stdout must hold only the JSON document, got:\n%s",
+		env.stdout.String())
+	assert.Equal(t, 1, result.BlobsDeleted)
+}

internal/vaultik/purge_per_name_test.go

@@ -267,6 +267,29 @@ func TestPurgeOlderThan_WithNameFilter(t *testing.T) {
 	assert.Contains(t, remaining, snapHomeT0)
 }
 
+func TestPurgeOlderThan_TooLargeDeletesNothing(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	snapshotIDs := []string{snapHomeT0, snapHomeT1}
+
+	v := setupPurgeTest(t, snapHostname, snapshotIDs)
+
+	err := v.PurgeSnapshotsWithOptions(&vaultik.SnapshotPurgeOptions{
+		OlderThan: "1000y",
+		Force:     true,
+	})
+	require.Error(t, err)
+
+	err = v.PurgeSnapshotsWithOptions(&vaultik.SnapshotPurgeOptions{
+		OlderThan: "292y",
+		Force:     true,
+	})
+	require.NoError(t, err)
+
+	assert.ElementsMatch(t, snapshotIDs, listRemainingSnapshots(t, v))
+}
+
 func TestPurgeKeepLatest_ThreeNames(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()

internal/vaultik/remote_info_test.go

@@ -4,6 +4,7 @@ import (
 	"bytes"
 	"context"
 	"encoding/json"
+	"strings"
 	"testing"
 	"time"
 
@@ -69,6 +70,74 @@ func TestRemoteInfo_UnreadableManifestLeavesOrphansUnknown(t *testing.T) {
 	assert.Equal(t, []any{unreadableKey}, doc["unreadable_manifests"])
 }
 
+// TestRemoteInfo_UnreadableManifestLeavesSnapshotBlobsUnknown checks
+// that the row of a snapshot whose manifest cannot be read gives its
+// blob count and blob size as unknown in the table and as null in
+// --json, not as 0. A directory without a manifest still shows 0: the
+// orphan figures count its blobs as orphaned, so it references none.
+func TestRemoteInfo_UnreadableManifestLeavesSnapshotBlobsUnknown(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+	readableKey := env.addRemote(t, listRemoteID,
+		time.Date(2026, 3, 2, 0, 0, 0, 0, time.UTC))
+
+	unreadableKey := snapshot.RemoteSnapshotKey(listLocalID)
+	require.NoError(t, env.store.Put(context.Background(),
+		"metadata/"+unreadableKey+"/manifest.json.zst",
+		bytes.NewReader([]byte("not a valid manifest"))))
+
+	noManifestKey := snapshot.RemoteSnapshotKey("testhost_home_2026-03-03T10:00:00Z")
+	require.NoError(t, env.store.Put(context.Background(),
+		"metadata/"+noManifestKey+"/db.zst.age",
+		bytes.NewReader([]byte("not a valid database"))))
+
+	require.NoError(t, env.v.RemoteInfo(false))
+
+	// The table truncates the remote key, so a row is found by a prefix.
+	wantUnknown := map[string]int{readableKey: 0, unreadableKey: 2, noManifestKey: 0}
+	for key, want := range wantUnknown {
+		var row string
+
+		for line := range strings.SplitSeq(env.stdout.String(), "\n") {
+			if strings.HasPrefix(line, key[:16]) {
+				row = line
+			}
+		}
+
+		require.NotEmpty(t, row, "no table row for %s", key)
+		assert.Equal(t, want, strings.Count(row, "unknown"), "row: %q", row)
+	}
+
+	env.stdout.Reset()
+	require.NoError(t, env.v.RemoteInfo(true))
+
+	var doc struct {
+		Snapshots []map[string]any `json:"snapshots"`
+	}
+
+	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &doc))
+	require.Len(t, doc.Snapshots, len(wantUnknown))
+
+	for _, entry := range doc.Snapshots {
+		switch entry["snapshot_id"] {
+		case readableKey:
+			assert.InDelta(t, 1, entry["blob_count"], 0)
+			assert.InDelta(t, fiveMegabytes, entry["blobs_size"], 0)
+		case noManifestKey:
+			assert.InDelta(t, 0, entry["blob_count"], 0)
+			assert.InDelta(t, 0, entry["blobs_size"], 0)
+		default:
+			assert.Equal(t, unreadableKey, entry["snapshot_id"])
+			assert.Contains(t, entry, "blob_count")
+			assert.Nil(t, entry["blob_count"])
+			assert.Contains(t, entry, "blobs_size")
+			assert.Nil(t, entry["blobs_size"])
+		}
+	}
+}
+
 // TestRemoteInfo_SkipsNonConformingMetadataName checks that a directory
 // under metadata/ whose name is not a remote key is left out of the
 // report, and that the orphan figures are unknown when it holds a

internal/vaultik/remove_snapshot_test.go

@@ -3,17 +3,21 @@ package vaultik_test
 import (
 	"bytes"
 	"context"
+	"database/sql"
 	"io"
 	"strings"
 	"sync"
 	"testing"
+	"time"
 
 	"github.com/klauspost/compress/zstd"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/database"
 	"sneak.berlin/go/vaultik/internal/log"
 	"sneak.berlin/go/vaultik/internal/snapshot"
 	"sneak.berlin/go/vaultik/internal/storage"
+	"sneak.berlin/go/vaultik/internal/types"
 	"sneak.berlin/go/vaultik/internal/vaultik"
 )
 
@@ -125,6 +129,12 @@ func (s *testStorer) ListStream(
 	return ch
 }
 
+// DeletePartialUploads has nothing to remove: Put stores each object
+// under its key at once.
+func (s *testStorer) DeletePartialUploads(_ context.Context, _ string) error {
+	return nil
+}
+
 func (s *testStorer) Info() storage.Info {
 	return storage.Info{
 		Type:     testLabel,
@@ -208,6 +218,37 @@ func addBlob(t *testing.T, store *testStorer, hash string) {
 	require.NoError(t, err)
 }
 
+// newLocalIndex returns an in-memory local index holding a completed
+// snapshot row for each of ids.
+func newLocalIndex(t *testing.T, ids ...string) *database.Repositories {
+	t.Helper()
+
+	ctx := context.Background()
+
+	db, err := database.New(ctx, ":memory:")
+	require.NoError(t, err)
+	t.Cleanup(func() { _ = db.Close() })
+
+	repos := database.NewRepositories(db)
+
+	for _, id := range ids {
+		completedAt := time.Now().UTC()
+		snap := &database.Snapshot{
+			ID:          types.SnapshotID(id),
+			Hostname:    snapHostname,
+			StartedAt:   completedAt,
+			CompletedAt: &completedAt,
+		}
+
+		err = repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
+			return repos.Snapshots.Create(ctx, tx, snap)
+		})
+		require.NoError(t, err)
+	}
+
+	return repos
+}
+
 // ============================================================================
 // Unit Tests for RemoveSnapshot
 // ============================================================================
@@ -227,6 +268,7 @@ func TestRemoveSnapshot_LocalOnly_PreservesRemote(t *testing.T) {
 	addBlob(t, store, blobA)
 
 	tv := vaultik.NewForTesting(store)
+	tv.Repositories = newLocalIndex(t, "snapshot-001")
 
 	opts := &vaultik.RemoveOptions{Force: true, LocalOnly: true}
 	result, err := tv.RemoveSnapshot("snapshot-001", opts)
@@ -262,6 +304,7 @@ func TestRemoveSnapshot_DefaultRemovesMetadataNotBlobs(t *testing.T) {
 	addBlob(t, store, blobShared)
 
 	tv := vaultik.NewForTesting(store)
+	tv.Repositories = newLocalIndex(t, "snapshot-001", "snapshot-002")
 
 	opts := &vaultik.RemoveOptions{Force: true}
 	result, err := tv.RemoveSnapshot("snapshot-001", opts)
@@ -310,6 +353,84 @@ func TestRemoveSnapshot_DryRun(t *testing.T) {
 	assert.Contains(t, tv.Stdout.String(), "[Dry run - no changes made]")
 }
 
+// TestRemoveSnapshot_UnknownIDIsError checks that an ID naming no
+// snapshot in the local index or on the destination store is an error
+// under every option, and that nothing is reported as removed.
+func TestRemoveSnapshot_UnknownIDIsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	for name, opts := range map[string]vaultik.RemoveOptions{
+		"force":      {Force: true},
+		"json":       {JSON: true},
+		"dry-run":    {Force: true, DryRun: true},
+		"local-only": {Force: true, LocalOnly: true},
+	} {
+		t.Run(name, func(t *testing.T) {
+			t.Parallel()
+
+			store := newTestStorer()
+			addManifest(t, store, "snapshot-001", nil)
+
+			tv := vaultik.NewForTesting(store)
+			tv.Repositories = newLocalIndex(t, "snapshot-001")
+
+			result, err := tv.RemoveSnapshot("snapshot-999", &opts)
+
+			require.ErrorContains(t, err, "snapshot not found")
+			assert.False(t, result.RemoteRemoved)
+			assert.Empty(t, tv.Stdout.String())
+			assert.True(t, store.hasKey(remoteKeyPath("snapshot-001")))
+		})
+	}
+}
+
+// TestRemoveSnapshot_NoMetadataOnDestination checks that removing a
+// snapshot whose metadata is not on the destination store does not
+// report metadata removed from it.
+func TestRemoveSnapshot_NoMetadataOnDestination(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	tv := vaultik.NewForTesting(newTestStorer())
+	tv.Repositories = newLocalIndex(t, "snapshot-001")
+
+	result, err := tv.RemoveSnapshot("snapshot-001",
+		&vaultik.RemoveOptions{Force: true})
+
+	require.NoError(t, err)
+	assert.False(t, result.RemoteRemoved)
+
+	out := tv.Stdout.String()
+	assert.Contains(t, out, "Removed snapshot 'snapshot-001' from local database")
+	assert.NotContains(t, out, "Removed snapshot metadata from remote storage")
+}
+
+// TestRemoveSnapshot_NotInLocalIndex checks that removing a snapshot
+// only the destination store holds removes its metadata there without
+// reporting a removal from the local database.
+func TestRemoveSnapshot_NotInLocalIndex(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	store := newTestStorer()
+	addManifest(t, store, "snapshot-001", nil)
+
+	tv := vaultik.NewForTesting(store)
+	tv.Repositories = newLocalIndex(t)
+
+	result, err := tv.RemoveSnapshot("snapshot-001",
+		&vaultik.RemoveOptions{Force: true})
+
+	require.NoError(t, err)
+	assert.True(t, result.RemoteRemoved)
+	assert.False(t, store.hasKey(remoteKeyPath("snapshot-001")))
+
+	out := tv.Stdout.String()
+	assert.NotContains(t, out, "from local database")
+	assert.Contains(t, out, "Removed snapshot metadata from remote storage")
+}
+
 func TestRemoveAllSnapshots_RequiresForce(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()
@@ -355,7 +476,8 @@ func TestRemoveAllSnapshots_WithForce(t *testing.T) {
 	out := tv.Stdout.String()
 	assert.Contains(t, out, "Removed 2 snapshot(s)")
 	assert.Contains(t, out, "Removed snapshot metadata from remote storage")
-	assert.Contains(t, out, "vaultik prune")
+	// Remote nuke, the only caller, deletes the blobs next itself.
+	assert.NotContains(t, out, "vaultik prune")
 }
 
 func TestRemoveAllSnapshots_DryRun(t *testing.T) {

internal/vaultik/snapshot.go

@@ -23,6 +23,8 @@ var (
 	errNoSnapshotsInConfig  = errors.New("no snapshots configured")
 	errSnapshotVerifyFailed = errors.New("verification failed")
 	errRemoveAllNeedsForce  = errors.New("--all requires --force")
+	errSnapshotNotFound     = errors.New("snapshot not found")
+	errSnapshotRemoveFailed = errors.New("snapshot(s) could not be removed")
 	errInvalidTableName     = errors.New("invalid table name")
 	errNoAgeRecipients      = errors.New(
 		"creating a snapshot needs at least one public key in " +
@@ -185,6 +187,7 @@ type snapshotStats struct {
 	totalBlobs         int
 	totalBytesSkipped  int64
 	totalFilesSkipped  int
+	totalFilesFailed   int
 	totalFilesDeleted  int
 	totalBytesDeleted  int64
 	totalBytesUploaded int64
@@ -315,6 +318,7 @@ func (v *Vaultik) scanAllDirectories(
 		stats.totalChunks += result.ChunksCreated
 		stats.totalBlobs += result.BlobsCreated
 		stats.totalFilesSkipped += result.FilesSkipped
+		stats.totalFilesFailed += result.FilesFailed
 		stats.totalBytesSkipped += result.BytesSkipped
 		stats.totalFilesDeleted += result.FilesDeleted
 		stats.totalBytesDeleted += result.BytesDeleted
@@ -326,6 +330,7 @@ func (v *Vaultik) scanAllDirectories(
 			"path", dir,
 			"files", result.FilesScanned,
 			"files_skipped", result.FilesSkipped,
+			"files_failed", result.FilesFailed,
 			"bytes", result.BytesScanned,
 			"bytes_skipped", result.BytesSkipped,
 			"chunks", result.ChunksCreated,
@@ -359,9 +364,11 @@ func (v *Vaultik) finalizeSnapshotMetadata(
 		return fmt.Errorf("getting snapshot blob sizes: %w", err)
 	}
 
+	// file_count and total_size leave out the files that could not be
+	// stored; stats.totalBytes already does.
 	extStats := snapshot.ExtendedBackupStats{
 		BackupStats: snapshot.BackupStats{
-			FilesScanned:  stats.totalFiles,
+			FilesScanned:  stats.totalFiles - stats.totalFilesFailed,
 			TotalSize:     stats.totalBytes + stats.totalBytesSkipped,
 			ChunksCreated: stats.totalChunks,
 			BlobsCreated:  stats.totalBlobs,
@@ -409,7 +416,8 @@ func (v *Vaultik) printSnapshotSummary(
 	snapshotID string, startTime time.Time, stats *snapshotStats,
 ) {
 	snapshotDuration := time.Since(startTime)
-	totalFilesChanged := stats.totalFiles - stats.totalFilesSkipped
+	totalFilesChanged := stats.totalFiles - stats.totalFilesSkipped -
+		stats.totalFilesFailed
 	totalBytesAll := stats.totalBytes + stats.totalBytesSkipped
 
 	var compressionRatio float64
@@ -426,6 +434,10 @@ func (v *Vaultik) printSnapshotSummary(
 		v.UI.Count(stats.totalFiles),
 		v.UI.Count(totalFilesChanged),
 		v.UI.Count(stats.totalFilesSkipped))
+	if stats.totalFilesFailed > 0 {
+		filesMsg += fmt.Sprintf(", %s failed", v.UI.Count(stats.totalFilesFailed))
+	}
+
 	if stats.totalFilesDeleted > 0 {
 		filesMsg += fmt.Sprintf(", %s deleted", v.UI.Count(stats.totalFilesDeleted))
 	}
@@ -633,7 +645,7 @@ func (v *Vaultik) confirmAndExecutePurge(
 				"snapshot_id", snapshotID, "error", err)
 		}
 
-		err = v.deleteRemoteSnapshotByKey(snapshot.RemoteSnapshotKey(snapshotID))
+		_, err = v.deleteRemoteSnapshotByKey(snapshot.RemoteSnapshotKey(snapshotID))
 		if err != nil {
 			return fmt.Errorf("deleting snapshot %s from remote: %w", snapshotID, err)
 		}
@@ -1143,6 +1155,11 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, err
 	}
 
+	inLocalIndex, err := v.findSnapshotToRemove(snapshotID, opts)
+	if err != nil {
+		return result, err
+	}
+
 	if opts.DryRun {
 		return v.removeSnapshotDryRun(result, snapshotID, opts)
 	}
@@ -1151,11 +1168,13 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, nil
 	}
 
-	log.Info("Removing snapshot from local database", "snapshot_id", snapshotID)
+	if inLocalIndex {
+		log.Info("Removing snapshot from local database", "snapshot_id", snapshotID)
 
-	err = v.deleteSnapshotFromLocalDB(snapshotID)
-	if err != nil {
-		return result, fmt.Errorf("removing from local database: %w", err)
+		err = v.deleteSnapshotFromLocalDB(snapshotID)
+		if err != nil {
+			return result, fmt.Errorf("removing from local database: %w", err)
+		}
 	}
 
 	if !opts.LocalOnly {
@@ -1174,9 +1193,11 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, v.outputRemoveJSON(result)
 	}
 
-	v.stdoutf("Removed snapshot '%s' from local database\n", snapshotID)
+	if inLocalIndex {
+		v.stdoutf("Removed snapshot '%s' from local database\n", snapshotID)
+	}
 
-	if !opts.LocalOnly && result.RemoteRemoved {
+	if result.RemoteRemoved {
 		v.printlnStdout("Removed snapshot metadata from remote storage")
 		v.stdoutf("\nNote: The removed snapshot's blobs remain on the remote. "+
 			"Run '%s' to delete any blobs no longer referenced by any "+
@@ -1186,6 +1207,45 @@ func (v *Vaultik) RemoveSnapshot(
 	return result, nil
 }
 
+// findSnapshotToRemove reports whether the local index has a row for
+// snapshotID, and returns errSnapshotNotFound when there is nothing to
+// remove: no row and, unless LocalOnly is set, no metadata on the
+// destination store either. The destination store is consulted only
+// when the local index has no row, so a snapshot in the local index can
+// still be removed from it while the destination store is unreachable.
+func (v *Vaultik) findSnapshotToRemove(
+	snapshotID string, opts *RemoveOptions,
+) (bool, error) {
+	if v.Repositories != nil {
+		snap, err := v.Repositories.Snapshots.GetByID(v.ctx, snapshotID)
+		if err != nil {
+			return false, fmt.Errorf("looking up snapshot in local index: %w", err)
+		}
+
+		if snap != nil {
+			return true, nil
+		}
+	}
+
+	if opts.LocalOnly {
+		return false, fmt.Errorf("%w in the local index: %s",
+			errSnapshotNotFound, snapshotID)
+	}
+
+	objects, err := v.remoteSnapshotObjects(snapshot.RemoteSnapshotKey(snapshotID))
+	if err != nil {
+		return false, fmt.Errorf("looking up snapshot on destination store: %w", err)
+	}
+
+	if len(objects) == 0 {
+		return false, fmt.Errorf(
+			"%w in the local index or on the destination store: %s",
+			errSnapshotNotFound, snapshotID)
+	}
+
+	return false, nil
+}
+
 // removeSnapshotDryRun reports what RemoveSnapshot would do without
 // making changes.
 func (v *Vaultik) removeSnapshotDryRun(
@@ -1245,14 +1305,14 @@ func (v *Vaultik) confirmRemoveSnapshot(snapshotID string, opts *RemoveOptions)
 // didn't finish and to run `vaultik snapshot remove` for the snapshot
 // again once the destination store is reachable (`vaultik prune` never
 // removes snapshot metadata). Returns true when the remote removal
-// succeeded.
+// succeeded and deleted something.
 func (v *Vaultik) removeSnapshotRemote(snapshotID string, opts *RemoveOptions) bool {
 	log.Info("Removing snapshot metadata from remote storage",
 		"snapshot_id", snapshotID)
 
 	remoteKey := snapshot.RemoteSnapshotKey(snapshotID)
 
-	err := v.deleteRemoteSnapshotByKey(remoteKey)
+	deleted, err := v.deleteRemoteSnapshotByKey(remoteKey)
 	if err != nil {
 		log.Warn("Could not remove snapshot metadata from remote storage; "+
 			"run '"+snapshotRemoveCommandHint+"' with the snapshot's ID "+
@@ -1270,7 +1330,7 @@ func (v *Vaultik) removeSnapshotRemote(snapshotID string, opts *RemoveOptions) b
 		return false
 	}
 
-	return true
+	return deleted > 0
 }
 
 // RemoveAllSnapshots removes every snapshot known to the local
@@ -1454,8 +1514,8 @@ func (v *Vaultik) handleRemoveAllDryRun(
 
 // executeRemoveAll deletes every local snapshot and, unless LocalOnly
 // is set, every corresponding remote metadata directory plus any
-// orphan remote keys. Blobs are not touched; the printed prune-command
-// hint is the next step.
+// orphan remote keys. Blobs are not touched. It returns an error when
+// any snapshot could not be removed.
 func (v *Vaultik) executeRemoveAll(
 	localSnaps, orphanRemoteKeys []string, opts *RemoveOptions,
 ) (*RemoveResult, error) {
@@ -1469,18 +1529,11 @@ func (v *Vaultik) executeRemoveAll(
 
 	result := &RemoveResult{}
 
-	remoteErrors := v.removeAllLocalSnapshots(localSnaps, opts, result)
+	failures := v.removeAllLocalSnapshots(localSnaps, opts, result)
 
 	if !opts.LocalOnly {
-		remoteErrors += v.removeAllOrphanRemotes(orphanRemoteKeys, result)
-
-		if remoteErrors == 0 {
-			result.RemoteRemoved = true
-		} else if v.UI != nil {
-			v.UI.Warningf("Some remote metadata deletions failed. Run '%s' "+
-				"once the remote is healthy to clean up unreferenced blobs.",
-				pruneCommandHint)
-		}
+		failures += v.removeAllOrphanRemotes(orphanRemoteKeys, result)
+		result.RemoteRemoved = failures == 0
 	}
 
 	if v.SnapshotManager != nil {
@@ -1490,6 +1543,10 @@ func (v *Vaultik) executeRemoveAll(
 		}
 	}
 
+	if failures > 0 {
+		return result, fmt.Errorf("%d %w", failures, errSnapshotRemoveFailed)
+	}
+
 	if opts.JSON {
 		return result, v.outputRemoveJSON(result)
 	}
@@ -1498,9 +1555,6 @@ func (v *Vaultik) executeRemoveAll(
 
 	if !opts.LocalOnly && result.RemoteRemoved {
 		v.printlnStdout("Removed snapshot metadata from remote storage")
-		v.stdoutf("\nNote: Removed snapshots' blobs remain on the remote. "+
-			"Run '%s' to delete any blobs no longer referenced by any "+
-			"remaining remote snapshot.\n", pruneCommandHint)
 	}
 
 	return result, nil
@@ -1543,12 +1597,13 @@ func (v *Vaultik) deleteIncompleteSnapshot(snapshotIDStr string, id any) bool {
 }
 
 // removeAllLocalSnapshots removes each known local snapshot (and, unless
-// --local-only, its remote metadata), returning the number of remote
-// deletion failures.
+// --local-only, its remote metadata), returning the number of snapshots
+// it could not remove. A snapshot left in the local index keeps its
+// remote metadata too, since it is not an orphan remote key.
 func (v *Vaultik) removeAllLocalSnapshots(
 	localSnaps []string, opts *RemoveOptions, result *RemoveResult,
 ) int {
-	remoteErrors := 0
+	failures := 0
 
 	for _, snapshotID := range localSnaps {
 		log.Info("Removing snapshot", "snapshot_id", snapshotID)
@@ -1558,24 +1613,26 @@ func (v *Vaultik) removeAllLocalSnapshots(
 			log.Error("Failed to remove from local database",
 				"snapshot_id", snapshotID, "error", err)
 
+			failures++
+
 			continue
 		}
 
 		if !opts.LocalOnly {
-			err = v.deleteRemoteSnapshotByKey(
+			_, err = v.deleteRemoteSnapshotByKey(
 				snapshot.RemoteSnapshotKey(snapshotID))
 			if err != nil {
 				log.Warn("Failed to remove snapshot metadata from remote",
 					"snapshot_id", snapshotID, "error", err)
 
-				remoteErrors++
+				failures++
 			}
 		}
 
 		result.SnapshotsRemoved = append(result.SnapshotsRemoved, snapshotID)
 	}
 
-	return remoteErrors
+	return failures
 }
 
 // removeAllOrphanRemotes deletes remote snapshot metadata that has no
@@ -1588,7 +1645,7 @@ func (v *Vaultik) removeAllOrphanRemotes(
 	for _, key := range orphanRemoteKeys {
 		log.Info("Removing orphan remote snapshot", "remote_key", key)
 
-		err := v.deleteRemoteSnapshotByKey(key)
+		_, err := v.deleteRemoteSnapshotByKey(key)
 		if err != nil {
 			log.Warn("Failed to remove orphan from remote",
 				"remote_key", key, "error", err)
@@ -1635,34 +1692,44 @@ func (v *Vaultik) deleteSnapshotFromLocalDB(snapshotID string) error {
 }
 
 // deleteRemoteSnapshotByKey removes everything under
-// metadata/<remoteKey>/ on the destination store. The argument is a
-// remote key (double-SHA256 derivation), not a human snapshot ID;
-// callers that have a human ID must hash via snapshot.RemoteSnapshotKey
-// first.
-func (v *Vaultik) deleteRemoteSnapshotByKey(remoteKey string) error {
-	prefix := fmt.Sprintf("metadata/%s/", remoteKey)
-	objectCh := v.Storage.ListStream(v.ctx, prefix)
-
-	var objectsToDelete []string
-
-	for object := range objectCh {
-		if object.Err != nil {
-			return fmt.Errorf("listing objects: %w", object.Err)
-		}
-
-		objectsToDelete = append(objectsToDelete, object.Key)
+// metadata/<remoteKey>/ on the destination store and returns how many
+// objects it deleted. The argument is a remote key (double-SHA256
+// derivation), not a human snapshot ID; callers that have a human ID
+// must hash via snapshot.RemoteSnapshotKey first.
+func (v *Vaultik) deleteRemoteSnapshotByKey(remoteKey string) (int, error) {
+	objectsToDelete, err := v.remoteSnapshotObjects(remoteKey)
+	if err != nil {
+		return 0, err
 	}
 
-	for _, key := range objectsToDelete {
-		err := v.Storage.Delete(v.ctx, key)
+	for i, key := range objectsToDelete {
+		err = v.Storage.Delete(v.ctx, key)
 		if err != nil {
-			return fmt.Errorf("removing %s: %w", key, err)
+			return i, fmt.Errorf("removing %s: %w", key, err)
 		}
 
 		log.Debug("Deleted remote object", "key", key)
 	}
 
-	return nil
+	return len(objectsToDelete), nil
+}
+
+// remoteSnapshotObjects lists the keys of every object under
+// metadata/<remoteKey>/ on the destination store.
+func (v *Vaultik) remoteSnapshotObjects(remoteKey string) ([]string, error) {
+	prefix := fmt.Sprintf("metadata/%s/", remoteKey)
+
+	var keys []string
+
+	for object := range v.Storage.ListStream(v.ctx, prefix) {
+		if object.Err != nil {
+			return nil, fmt.Errorf("listing objects: %w", object.Err)
+		}
+
+		keys = append(keys, object.Key)
+	}
+
+	return keys, nil
 }
 
 // outputRemoveJSON outputs the removal result as JSON
@@ -1756,9 +1823,9 @@ func (v *Vaultik) PruneDatabase() (*PruneResult, error) {
 	return result, nil
 }
 
-// countUnknown is what a count reads as when its query could not be run,
-// distinct from "0", which means the table really was empty.
-const countUnknown = "unknown"
+// unknownText is what a count or size reads as when it could not be
+// determined, distinct from "0", which is a real zero.
+const unknownText = "unknown"
 
 // tableCountForReport returns the row count of a table for the prune
 // summary, or nil if the count could not be read. A read failure is
@@ -1795,7 +1862,7 @@ func countDiff(before, after *int64) *int64 {
 // one that could not be queried.
 func countText(count *int64) string {
 	if count == nil {
-		return countUnknown
+		return unknownText
 	}
 
 	return strconv.FormatInt(*count, 10)

internal/vaultik/snapshot_failed_file_test.go

@@ -0,0 +1,123 @@
+package vaultik_test
+
+import (
+	"bytes"
+	"context"
+	"fmt"
+	"os"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/afero"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/config"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage"
+	"sneak.berlin/go/vaultik/internal/ui"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// openFailFs is the real filesystem, except that opening path fails
+// with err. Phase 1 of a backup only lstats a file, so it still counts
+// path; phase 2 is the first to open it.
+type openFailFs struct {
+	afero.OsFs
+
+	path string
+	err  error
+}
+
+//nolint:ireturn // afero.Fs.Open is defined to return the interface.
+func (f *openFailFs) Open(name string) (afero.File, error) {
+	if name == f.path {
+		return nil, &os.PathError{Op: "open", Path: name, Err: f.err}
+	}
+
+	return f.OsFs.Open(name)
+}
+
+// A file that phase 2 cannot open is reported as failed, not as
+// unchanged, and neither the summary's data total nor the snapshots row
+// counts it. See https://git.eeqj.de/sneak/vaultik/issues/280.
+func TestSnapshotSummaryCountsFileNotStoredAsFailed(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	tests := []struct {
+		name       string
+		openErr    error
+		skipErrors bool
+	}{
+		// What a normal user gets opening a file with mode 000.
+		{name: "unopenable under skip-errors",
+			openErr: os.ErrPermission, skipErrors: true},
+		// What opening a file removed after phase 1 gives.
+		{name: "removed between the phases",
+			openErr: os.ErrNotExist, skipErrors: false},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			ctx := context.Background()
+
+			// The scan walks the source path with symlinks resolved, so
+			// failedPath must be spelled the same way to match.
+			tempDir, err := filepath.EvalSymlinks(t.TempDir())
+			require.NoError(t, err)
+
+			srcDir := filepath.Join(tempDir, "src")
+			failedPath := filepath.Join(srcDir, "failed.txt")
+			storedContent := []byte("this file is backed up")
+			storedSize := int64(len(storedContent))
+
+			fs := &openFailFs{path: failedPath, err: tt.openErr}
+			require.NoError(t, fs.MkdirAll(srcDir, 0o755))
+			require.NoError(t, afero.WriteFile(fs,
+				filepath.Join(srcDir, "stored.txt"), storedContent, 0o644))
+			require.NoError(t, afero.WriteFile(fs,
+				failedPath, []byte("this file cannot be opened"), 0o644))
+
+			cfg := faultTestConfig()
+			cfg.IndexPath = filepath.Join(tempDir, "index.sqlite")
+			cfg.Snapshots = map[string]config.SnapshotConfig{
+				"src": {Paths: []string{srcDir}},
+			}
+
+			store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
+			require.NoError(t, err)
+
+			db, err := database.New(ctx, cfg.IndexPath)
+			require.NoError(t, err)
+			t.Cleanup(func() { _ = db.Close() })
+
+			repos := database.NewRepositories(db)
+			out := &bytes.Buffer{}
+			v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
+			v.UI = ui.NewWithColor(out, false)
+
+			require.NoError(t, v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
+				SkipErrors: tt.skipErrors,
+				Snapshots:  []string{"src"},
+			}))
+
+			summary := out.String()
+			assert.Contains(t, summary,
+				"Files: 2 examined, 1 backed up, 0 unchanged, 1 failed.")
+			assert.Contains(t, summary,
+				fmt.Sprintf("Data: %s total (%s backed up).",
+					v.UI.Size(storedSize), v.UI.Size(storedSize)))
+
+			snap, err := repos.Snapshots.GetByID(ctx,
+				localSnapshotID(ctx, t, repos, "src"))
+			require.NoError(t, err)
+			require.NotNil(t, snap)
+
+			assert.Equal(t, int64(1), snap.FileCount)
+			assert.Equal(t, storedSize, snap.TotalSize)
+		})
+	}
+}

internal/vaultik/snapshot_skip_errors_test.go

@@ -0,0 +1,75 @@
+package vaultik_test
+
+import (
+	"context"
+	"fmt"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/afero"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/config"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// --skip-errors skips only a file that cannot be opened or read. A local
+// index error while a directory is recorded stops the backup, and the
+// snapshot is not recorded as complete. See
+// https://git.eeqj.de/sneak/vaultik/issues/284.
+func TestSkipErrorsBackupStopsOnIndexErrorRecordingDirectory(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+
+	// The scan walks the source path with symlinks resolved, so dirPath
+	// must be spelled the same way to match the row the scan inserts.
+	tempDir, err := filepath.EvalSymlinks(t.TempDir())
+	require.NoError(t, err)
+
+	srcDir := filepath.Join(tempDir, "src")
+	dirPath := filepath.Join(srcDir, "dir")
+
+	fs := afero.NewOsFs()
+	require.NoError(t, fs.MkdirAll(dirPath, 0o755))
+	require.NoError(t, afero.WriteFile(fs,
+		filepath.Join(dirPath, "file.txt"), []byte("file content"), 0o644))
+
+	cfg := faultTestConfig()
+	cfg.IndexPath = filepath.Join(tempDir, "index.sqlite")
+	cfg.Snapshots = map[string]config.SnapshotConfig{
+		"tree": {Paths: []string{srcDir}},
+	}
+
+	store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
+	require.NoError(t, err)
+
+	db, err := database.New(ctx, cfg.IndexPath)
+	require.NoError(t, err)
+	t.Cleanup(func() { _ = db.Close() })
+
+	// The local index refuses the directory's files row.
+	_, err = db.Conn().ExecContext(ctx, fmt.Sprintf(`
+		CREATE TRIGGER refuse_directory BEFORE INSERT ON files
+		WHEN NEW.path = '%s'
+		BEGIN SELECT RAISE(ABORT, 'simulated index error'); END`, dirPath))
+	require.NoError(t, err)
+
+	repos := database.NewRepositories(db)
+	v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
+
+	err = v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
+		SkipErrors: true,
+		Snapshots:  []string{"tree"},
+	})
+	require.ErrorContains(t, err, "simulated index error")
+
+	snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
+	require.NoError(t, err)
+	require.Len(t, snapshots, 1)
+	assert.Nil(t, snapshots[0].CompletedAt)
+}

internal/vaultik/storage_bind.go

@@ -9,7 +9,7 @@ import (
 )
 
 // errStorageBindingMismatch is returned when the local index database is
-// bound to a different destination than the configured storage_url.
+// bound to a different destination than the configured one.
 var errStorageBindingMismatch = errors.New(
 	"local index is bound to a different backup destination")
 
@@ -24,8 +24,9 @@ var errStorageBindingMismatch = errors.New(
 //
 // Behaviour:
 //   - On first use (empty stored value), record the configured
-//     storage_url and log the binding.
-//   - When the stored value matches the configured storage_url, do
+//     destination (storage_url, or the s3.* endpoint, bucket and
+//     prefix) and log the binding.
+//   - When the stored value matches the configured destination, do
 //     nothing and return nil.
 //   - When the two differ, refuse with an error that tells the user
 //     how to recover (revert the config, or run `vaultik database
@@ -46,12 +47,10 @@ func (v *Vaultik) EnsureStorageBinding() error {
 
 	configured := v.Config.StorageURL
 	if configured == "" {
-		// Some legacy configs still use the split s3.* keys instead of
-		// storage_url. Falling back to a synthetic URL for those would
-		// hide the fact that the binding is loose. Instead, treat
-		// unset as "nothing to bind against" — the check is
-		// necessarily best-effort for those configs.
-		return nil
+		// The s3.* form: bind on its endpoint, bucket and prefix,
+		// written the way storage_url would name the same destination.
+		s3 := v.Config.S3
+		configured = "s3://" + s3.Bucket + "/" + s3.Prefix + "?endpoint=" + s3.Endpoint
 	}
 
 	stored, err := v.Repositories.LocalMeta.Get(v.ctx, database.LocalMetaKeyStorageURL)
@@ -96,7 +95,8 @@ func buildBindingMismatchMessage(stored, configured string) string {
 		"future snapshots referencing blobs that don't exist at the new destination.\n" +
 		"\n" +
 		"To proceed, either:\n" +
-		"  - revert storage_url in your config to the bound destination, or\n" +
+		"  - revert storage_url (or the s3.* endpoint, bucket and prefix) in your\n" +
+		"    config to the bound destination, or\n" +
 		"  - run 'vaultik database delete' to discard the local index and rebuild it\n" +
 		"    from a fresh full backup against the new destination"
 }

internal/vaultik/storage_bind_test.go

@@ -76,3 +76,51 @@ func TestEnsureStorageBinding_MismatchRefuses(t *testing.T) {
 	assert.Contains(t, err.Error(), "file:///mnt/backups/new")
 	assert.Contains(t, err.Error(), "vaultik database delete")
 }
+
+// A config with no storage_url names its destination with s3.endpoint,
+// s3.bucket and s3.prefix; a change to any of them must be refused just
+// as a changed storage_url is.
+func TestEnsureStorageBinding_S3FieldsChangeRefuses(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	bound := config.S3Config{
+		Endpoint: "https://s3.example.com",
+		Bucket:   "bucket-a",
+		Prefix:   "backups",
+	}
+
+	tests := []struct {
+		name    string
+		changed config.S3Config
+	}{
+		{"bucket", config.S3Config{
+			Endpoint: bound.Endpoint, Bucket: "bucket-b", Prefix: bound.Prefix,
+		}},
+		{"prefix", config.S3Config{
+			Endpoint: bound.Endpoint, Bucket: bound.Bucket, Prefix: "other",
+		}},
+		{"endpoint", config.S3Config{
+			Endpoint: "https://s3.other.com", Bucket: bound.Bucket, Prefix: bound.Prefix,
+		}},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			tv, _ := buildBindTestVaultik(t, "")
+
+			tv.Config.S3 = bound
+			require.NoError(t, tv.EnsureStorageBinding(), "first use binds")
+			require.NoError(t, tv.EnsureStorageBinding(), "same destination passes")
+
+			tv.Config.S3 = tt.changed
+			err := tv.EnsureStorageBinding()
+			require.Error(t, err)
+			assert.Contains(t, err.Error(),
+				"local index is bound to a different backup destination")
+			assert.Contains(t, err.Error(), "vaultik database delete")
+		})
+	}
+}