Report blob counts from snapshot verify --deep --json (closes #314)

Deep verify set verified only on success and never set missing, so a
failed --deep --json run reported zero for both. It now counts each blob
whose contents pass as it goes, and the existence check runs through
every blob, counting the ones storage reports not found as missing and
the wrong-size ones as mismatched, as shallow verify does; it fails if it
found any. Any other storage error stops the check and fails with that
error, so a blob that cannot be checked is never reported as missing.

Deep verify still stops at the first damaged blob and reads no blob
contents while any blob is missing or the wrong size, so verified is 0
there where shallow mode counts the present blobs.

Model: opus-5-5

README.md

@@ -293,8 +293,8 @@ needed.
 **`snapshot list`**: Show every snapshot known to this host — the union
 of the local index and the backup destination store — with timestamps
 and three sizes per snapshot (compressed remote size; total
-uncompressed chunk size; size of chunks newly referenced by that
-snapshot).
+uncompressed chunk size; size of the chunks that snapshot stored that
+were not stored before, recorded when its backup ran).
 
 Listing the destination store does **not** require the age secret key,
 so it works in vaultik's intended configuration, where the backed-up
@@ -307,8 +307,8 @@ only the hash, so hostname and snapshot name exist solely in the local
 index and in the encrypted per-snapshot database. Snapshots found only
 on the destination store are therefore listed as
 `<remote only:<abbreviated remote key>>` and show `<remote only>` in
-the uncompressed and "new chunk" columns, which can only be computed
-from the local index. Their timestamp and compressed size are real,
+the uncompressed and "new chunk" columns, which come only from the
+local index. Their timestamp and compressed size are real,
 read from the manifest.
 
 Snapshots in the local index with no counterpart on the destination
@@ -433,7 +433,10 @@ object store. Credentials are read from `s3.access_key_id` and
 `s3.secret_access_key` in the config file.
 
 **Local filesystem** (`file:///path/to/backup`): Stores blobs and metadata on
-a local or mounted filesystem. Useful for testing or backing up to a NAS.
+a local or mounted filesystem. Useful for testing or backing up to a NAS. The
+path must be absolute; a relative one is refused when the config loads.
+Percent-escapes in the path are decoded, so `my%20stick` and `my stick` name
+the same directory.
 
 **Rclone** (`rclone://remote/path`): Uses rclone's 70+ supported cloud
 providers. Requires rclone to be configured separately (`rclone config`).

docs/DATAMODEL.md

@@ -119,6 +119,7 @@ Tracks backup snapshots.
 - `completed_at` (INTEGER) - Completion timestamp (NULL if in progress)
 - `file_count` (INTEGER) - Number of files in snapshot
 - `chunk_count` (INTEGER) - Number of chunks this snapshot stored that were not stored before
+- `new_chunk_size` (INTEGER) - Total size of those chunks before compression; `snapshot list` shows it as NEW CHUNK SIZE
 - `blob_count` (INTEGER) - Number of blobs this snapshot created
 - `total_size` (INTEGER) - Total size of all files
 - `blob_size` (INTEGER) - Total compressed size of all referenced blobs

internal/blob/packer.go

@@ -245,6 +245,17 @@ func (p *Packer) Flush(ctx context.Context) error {
 	return nil
 }
 
+// DiscardCurrentBlob closes and removes the temp file of the blob being
+// packed, if any, and drops that blob. A caller that stops before Flush
+// must call it, or the temp file is left behind. Thread-safe.
+func (p *Packer) DiscardCurrentBlob() {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+
+	p.cleanupTempFile()
+	p.currentBlob = nil
+}
+
 // FinalizeBlob finalizes the current blob being assembled.
 // This compresses the accumulated chunks, encrypts the result, and computes
 // the content-addressed hash. The finalized blob is either passed to the

internal/cli/config.go

@@ -251,6 +251,12 @@ func NewConfigCommand() *cobra.Command {
 		Use:   "config",
 		Short: "Manage the configuration file",
 		Long:  "Commands for creating, editing, and querying the vaultik config file.",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	cmd.AddCommand(newConfigInitCommand())

internal/cli/database.go

@@ -15,6 +15,12 @@ func NewDatabaseCommand() *cobra.Command {
 		Use:   "database",
 		Short: "Manage the local state database",
 		Long:  `Commands for managing the local SQLite state database.`,
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	cmd.AddCommand(

internal/cli/entry_unknown_subcommand_test.go

@@ -0,0 +1,43 @@
+package cli //nolint:testpackage // shares runEntry and the command-word constants
+
+import (
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+)
+
+// TestEntryGroupRejectsUnknownSubcommand runs each group command with a
+// mistyped subcommand, as a crontab line might carry one. It must fail
+// with exit 1 and name the word, as `vaultik bogus` does at the top
+// level, instead of printing the group's help and exiting 0 having done
+// nothing. The group name alone still prints its help.
+//
+//nolint:paralleltest // replaces os.Args, os.Stdout and os.Stderr
+func TestEntryGroupRejectsUnknownSubcommand(t *testing.T) {
+	for _, testCase := range []struct {
+		group    string
+		mistyped string
+	}{
+		{group: cmdSnapshot, mistyped: "craete"},
+		{group: "config", mistyped: "inti"},
+		{group: cmdRemote, mistyped: "ifno"},
+		{group: "database", mistyped: "delte"},
+		{group: "completion", mistyped: "nosuchshell"},
+	} {
+		t.Run(testCase.group, func(t *testing.T) {
+			code, stdout, stderr := runEntry(t,
+				testCase.group, testCase.mistyped)
+
+			assert.Equal(t, 1, code)
+			assert.Empty(t, stdout)
+			assert.Contains(t, stderr,
+				`unknown command "`+testCase.mistyped+`"`)
+
+			code, stdout, _ = runEntry(t, testCase.group)
+
+			assert.Equal(t, 0, code)
+			assert.Contains(t, stdout,
+				programName+" "+testCase.group+" [command]")
+		})
+	}
+}

internal/cli/remote.go

@@ -18,6 +18,12 @@ func NewRemoteCommand() *cobra.Command {
 		Use:   "remote",
 		Short: "Remote storage management commands",
 		Long:  "Commands for inspecting and managing remote storage",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	// Add subcommands

internal/cli/root.go

@@ -74,6 +74,21 @@ on the source system.`,
 		NewDatabaseCommand(),
 	)
 
+	// cobra adds the completion command only when Execute runs, and with
+	// no Run, so it skipped its own cobra.NoArgs and a mistyped shell name
+	// printed help and exited 0. Adding it here lets it have a Run. Its
+	// scripts go to os.Stdout as it is now: a later SetOut does not
+	// redirect them.
+	cmd.InitDefaultCompletionCmd()
+
+	for _, sub := range cmd.Commands() {
+		if sub.Name() == "completion" {
+			sub.Run = func(completion *cobra.Command, _ []string) {
+				_ = completion.Help()
+			}
+		}
+	}
+
 	return cmd
 }
 

internal/cli/snapshot.go

@@ -41,6 +41,12 @@ func NewSnapshotCommand() *cobra.Command {
 		Use:   "snapshot",
 		Short: "Snapshot management commands",
 		Long:  "Commands for creating, listing, and managing snapshots",
+		// cobra checks Args only on a command that has a Run: without
+		// one, a mistyped subcommand printed help and exited 0.
+		Args: cobra.NoArgs,
+		Run: func(cmd *cobra.Command, _ []string) {
+			_ = cmd.Help()
+		},
 	}
 
 	// Add subcommands

internal/config/config.go

@@ -61,6 +61,9 @@ var (
 	errBadS3PartSize    = errors.New("s3.part_size must be between 5MiB and 5GiB")
 	errBadStorageScheme = errors.New(
 		"storage_url must start with s3://, file://, or rclone://")
+	errFileURLNotAbsolute = errors.New(
+		"a file:// storage_url needs an absolute path, " +
+			"as in file:///path/to/backup")
 	errStorageNotConfigured = errors.New(
 		"storage not configured; set storage_url or provide s3.endpoint + " +
 			"s3.bucket + credentials")
@@ -461,11 +464,18 @@ func (c *Config) validateStorage() error {
 
 // validateStorageURL validates URL-based storage configuration. File and
 // rclone URLs need no credentials; S3 URLs require the legacy s3.*
-// credential fields.
+// credential fields. A file URL must name an absolute path: a relative one
+// would resolve against the working directory, so the destination would
+// move with it.
 func (c *Config) validateStorageURL() error {
 	switch {
 	case strings.HasPrefix(c.StorageURL, "file://"):
-		// File storage doesn't need S3 credentials
+		// storage.ParseStorageURL applies the same rule, but config
+		// cannot import storage, which imports config.
+		if !strings.HasPrefix(c.StorageURL, "file:///") {
+			return errFileURLNotAbsolute
+		}
+
 		return nil
 	case strings.HasPrefix(c.StorageURL, "rclone://"):
 		// Rclone storage uses rclone's own config

internal/config/config_test.go

@@ -337,6 +337,35 @@ func TestLoadS3PartSize(t *testing.T) {
 	})
 }
 
+// TestLoadRejectsRelativeFileURL checks that a file:// storage_url with a
+// relative path fails at load. Accepted, it would resolve against the
+// working directory, so a backup run from another directory would write
+// to a different destination and still succeed.
+func TestLoadRejectsRelativeFileURL(t *testing.T) {
+	t.Parallel()
+
+	const relativeConfig = "snapshots:\n" +
+		"  test:\n" +
+		"    paths: [/tmp/vaultik-test-source]\n" +
+		"storage_url: file://dest\n"
+
+	path := filepath.Join(t.TempDir(), "config.yml")
+
+	err := os.WriteFile(path, []byte(relativeConfig), 0o600)
+	if err != nil {
+		t.Fatalf("write config: %v", err)
+	}
+
+	_, err = Load(path)
+	if !errors.Is(err, errFileURLNotAbsolute) {
+		t.Fatalf("Load() error = %v, want errFileURLNotAbsolute", err)
+	}
+
+	if !strings.Contains(err.Error(), "absolute path") {
+		t.Errorf("error %q does not say to use an absolute path", err.Error())
+	}
+}
+
 // TestValidateAgeRecipients checks that recipients are parsed at config load
 // (a bad entry fails immediately, not mid-backup) and that no invalid entry —
 // least of all a pasted secret key — is echoed in the error. An empty list

internal/database/repositories.go

@@ -3,6 +3,7 @@ package database
 import (
 	"context"
 	"database/sql"
+	"errors"
 	"fmt"
 )
 
@@ -60,22 +61,24 @@ func (r *Repositories) WithTx(ctx context.Context, fn TxFunc) error {
 
 	defer func() {
 		if p := recover(); p != nil {
-			rollbackErr := tx.Rollback()
-			if rollbackErr != nil {
-				Fatalf("failed to rollback transaction: %v", rollbackErr)
-			}
+			// The panic is the failure to report, so a rollback error
+			// is dropped.
+			_ = tx.Rollback()
 
 			panic(p)
-		} else if err != nil {
-			rollbackErr := tx.Rollback()
-			if rollbackErr != nil {
-				Fatalf("failed to rollback transaction: %v", rollbackErr)
-			}
 		}
 	}()
 
 	err = fn(ctx, tx)
 	if err != nil {
+		// Once ctx is cancelled, database/sql rolls the transaction
+		// back itself and Rollback returns sql.ErrTxDone.
+		rollbackErr := tx.Rollback()
+		if rollbackErr != nil && !errors.Is(rollbackErr, sql.ErrTxDone) {
+			return fmt.Errorf("%w; rolling back transaction: %w",
+				err, rollbackErr)
+		}
+
 		return err
 	}
 

internal/database/repositories_test.go

@@ -4,6 +4,7 @@ import (
 	"context"
 	"database/sql"
 	"errors"
+	"strings"
 	"testing"
 	"time"
 
@@ -235,6 +236,125 @@ func TestRepositoriesTransactionRollback(t *testing.T) {
 	}
 }
 
+// When the context is cancelled during the body, database/sql rolls the
+// transaction back itself, so WithTx's own rollback finds it already
+// done. WithTx must return the body's error alone, without that rollback.
+func TestRepositoriesTransactionContextCancelled(t *testing.T) {
+	t.Parallel()
+
+	db, cleanup := setupTestDB(t)
+	defer cleanup()
+
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+
+	repos := database.NewRepositories(db)
+
+	err := repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
+		file := &database.File{
+			Path:  "/test/cancelled_file.txt",
+			MTime: time.Now().Truncate(time.Second),
+			Size:  1024,
+			Mode:  0644,
+			UID:   1000,
+			GID:   1000,
+		}
+
+		err := repos.Files.Create(ctx, tx, file)
+		if err != nil {
+			return err
+		}
+
+		cancel()
+
+		// database/sql rolls back from a goroutine of its own; wait
+		// until it has, so the test does not depend on that race.
+		for {
+			_, err = tx.ExecContext(context.WithoutCancel(ctx), "SELECT 1")
+			if errors.Is(err, sql.ErrTxDone) {
+				return ctx.Err()
+			}
+
+			time.Sleep(time.Millisecond)
+		}
+	})
+	if !errors.Is(err, context.Canceled) {
+		t.Fatalf("expected context.Canceled, got: %v", err)
+	}
+
+	if errors.Is(err, sql.ErrTxDone) {
+		t.Fatalf("the already-done rollback was reported: %v", err)
+	}
+
+	file, err := repos.Files.GetByPath(
+		context.Background(), "/test/cancelled_file.txt",
+	)
+	if err != nil {
+		t.Fatalf("error checking for file: %v", err)
+	}
+
+	if file != nil {
+		t.Error("file should not exist after the cancelled transaction")
+	}
+}
+
+// A body that ends the transaction itself with ROLLBACK makes WithTx's
+// own rollback fail. WithTx must return that failure together with the
+// body's error.
+func TestRepositoriesTransactionRollbackFails(t *testing.T) {
+	t.Parallel()
+
+	db, cleanup := setupTestDB(t)
+	defer cleanup()
+
+	ctx := context.Background()
+	repos := database.NewRepositories(db)
+
+	err := repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
+		_, err := tx.ExecContext(ctx, "ROLLBACK")
+		if err != nil {
+			return err
+		}
+
+		return errIntentionalRollback
+	})
+	if !errors.Is(err, errIntentionalRollback) {
+		t.Fatalf("expected the body's error, got: %v", err)
+	}
+
+	if !strings.Contains(err.Error(), "rolling back transaction") {
+		t.Errorf("expected the failed rollback in the error, got: %v", err)
+	}
+}
+
+// When the body ends the transaction itself with ROLLBACK and then
+// panics, WithTx's own rollback fails; the panic must still reach the
+// caller.
+func TestRepositoriesTransactionPanicRollbackFails(t *testing.T) {
+	t.Parallel()
+
+	db, cleanup := setupTestDB(t)
+	defer cleanup()
+
+	ctx := context.Background()
+	repos := database.NewRepositories(db)
+
+	defer func() {
+		if recover() == nil {
+			t.Error("expected the body's panic to reach the caller")
+		}
+	}()
+
+	_ = repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
+		_, err := tx.ExecContext(ctx, "ROLLBACK")
+		if err != nil {
+			return err
+		}
+
+		panic(errIntentionalRollback)
+	})
+}
+
 func TestRepositoriesReadTransaction(t *testing.T) {
 	t.Parallel()
 

internal/database/schema/001.sql

@@ -86,6 +86,7 @@ CREATE TABLE IF NOT EXISTS snapshots (
     completed_at INTEGER,
     file_count INTEGER NOT NULL DEFAULT 0,
     chunk_count INTEGER NOT NULL DEFAULT 0,
+    new_chunk_size INTEGER NOT NULL DEFAULT 0,
     blob_count INTEGER NOT NULL DEFAULT 0,
     total_size INTEGER NOT NULL DEFAULT 0,
     blob_size INTEGER NOT NULL DEFAULT 0,

internal/database/snapshots.go

@@ -129,6 +129,7 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 	compressionLevel int,
 	uploadBytes int64,
 	uploadDurationMs int64,
+	newChunkSize int64,
 ) error {
 	compressionRatio, err := r.extendedCompressionRatio(
 		ctx, tx, snapshotID, blobUncompressedSize,
@@ -143,18 +144,19 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 		    compression_ratio = ?,
 		    compression_level = ?,
 		    upload_bytes = ?,
-		    upload_duration_ms = ?
+		    upload_duration_ms = ?,
+		    new_chunk_size = ?
 		WHERE id = ?
 	`
 
 	if tx != nil {
 		_, err = tx.ExecContext(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, snapshotID)
+			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
 	} else {
 		_, err = r.db.ExecWithLog(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, snapshotID)
+			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
 	}
 
 	if err != nil {
@@ -594,45 +596,24 @@ func (r *SnapshotRepository) GetSnapshotUncompressedChunkSize(
 	return totalSize, nil
 }
 
-// GetSnapshotNewChunkSize returns the sum of plaintext sizes of chunks that are
-// referenced by this snapshot but not by any earlier completed snapshot known to
-// the local database. The result is the marginal uncompressed data this snapshot
-// added to the dedup pool — i.e., the delta from prior snapshots.
+// GetSnapshotNewChunkSize returns the total plaintext size of the chunks the
+// snapshot's backup stored that were not stored before, as the backup
+// recorded it. It is not derived from the snapshot's files: a file's row is
+// shared by every snapshot that lists it and is rewritten when the file
+// changes, so it shows only the file's latest chunks.
 func (r *SnapshotRepository) GetSnapshotNewChunkSize(
 	ctx context.Context, snapshotID string,
 ) (int64, error) {
-	query := `
-		WITH this_snap_chunks AS (
-			SELECT DISTINCT fc.chunk_hash
-			FROM snapshot_files sf
-			JOIN file_chunks fc ON sf.file_id = fc.file_id
-			WHERE sf.snapshot_id = ?
-		),
-		prior_chunks AS (
-			SELECT DISTINCT fc.chunk_hash
-			FROM snapshots s
-			JOIN snapshot_files sf ON sf.snapshot_id = s.id
-			JOIN file_chunks fc ON fc.file_id = sf.file_id
-			WHERE s.completed_at IS NOT NULL
-			  AND s.id != ?
-			  AND s.started_at < (SELECT started_at FROM snapshots WHERE id = ?)
-		)
-		SELECT COALESCE(SUM(c.size), 0)
-		FROM chunks c
-		JOIN this_snap_chunks t ON c.chunk_hash = t.chunk_hash
-		WHERE c.chunk_hash NOT IN (SELECT chunk_hash FROM prior_chunks)
-	`
+	query := `SELECT new_chunk_size FROM snapshots WHERE id = ?`
 
-	var totalSize int64
+	var newChunkSize int64
 
-	err := r.db.conn.QueryRowContext(
-		ctx, query, snapshotID, snapshotID, snapshotID,
-	).Scan(&totalSize)
+	err := r.db.conn.QueryRowContext(ctx, query, snapshotID).Scan(&newChunkSize)
 	if err != nil {
 		return 0, fmt.Errorf("querying new chunk size: %w", err)
 	}
 
-	return totalSize, nil
+	return newChunkSize, nil
 }
 
 // GetIncompleteSnapshots returns all snapshots that haven't been completed

internal/log/tty_handler.go

@@ -10,6 +10,8 @@ import (
 	"sync"
 	"time"
 	"unicode"
+
+	"github.com/dustin/go-humanize"
 )
 
 // groupSeparator joins an open group path to an attribute key. This
@@ -304,18 +306,13 @@ func formatDuration(d time.Duration) string {
 	}
 }
 
-// formatBytes formats bytes in a human-readable way
+// formatBytes formats a byte count with humanize.Bytes, as every command
+// prints one. humanize.Bytes takes no negative count, so one is printed
+// as it is.
 func formatBytes(b int64) string {
-	const unit = 1024
-	if b < unit {
+	if b < 0 {
 		return fmt.Sprintf("%d B", b)
 	}
 
-	div, exp := int64(unit), 0
-	for n := b / unit; n >= unit; n /= unit {
-		div *= unit
-		exp++
-	}
-
-	return fmt.Sprintf("%.1f %cB", float64(b)/float64(div), "KMGTPE"[exp])
+	return humanize.Bytes(uint64(b))
 }

internal/log/tty_handler_test.go

@@ -200,7 +200,8 @@ func TestTTYHandlerWithGroupQualifiesKeys(t *testing.T) {
 func TestTTYHandlerByteFormattingSurvivesGrouping(t *testing.T) {
 	t.Parallel()
 
-	const oneAndAHalfKiB = 1536
+	// Printed as "1.0 MB", in powers of 1000 like every other byte count.
+	const oneMegabyte = 1_000_000
 
 	for name, testCase := range map[string]struct {
 		derive func(*slog.Logger) *slog.Logger
@@ -223,13 +224,13 @@ func TestTTYHandlerByteFormattingSurvivesGrouping(t *testing.T) {
 			var buf bytes.Buffer
 
 			logger := slog.New(log.NewTTYHandler(&buf, debugHandlerOptions()))
-			testCase.derive(logger).Info("uploaded", "bytes", oneAndAHalfKiB)
+			testCase.derive(logger).Info("uploaded", "bytes", oneMegabyte)
 
 			line := ansiEscape.ReplaceAllString(buf.String(), "")
 
-			assert.Contains(t, line, testCase.key+"=1.5 KB",
+			assert.Contains(t, line, testCase.key+"=1.0 MB",
 				"a byte count must be human-readable however it is qualified")
-			assert.NotContains(t, line, strconv.Itoa(oneAndAHalfKiB),
+			assert.NotContains(t, line, strconv.Itoa(oneMegabyte),
 				"the raw number must not survive the formatting")
 		})
 	}

internal/snapshot/exclude_test.go

@@ -531,3 +531,50 @@ func TestExcludePatterns_UnanchoredPatternFile(t *testing.T) {
 	require.Equal(t, 1, result.FilesScanned,
 		"Unanchored pattern for file should match anywhere")
 }
+
+func TestExcludePatterns_DoubleStarDirectoryAtEveryDepth(t *testing.T) {
+	t.Parallel()
+
+	// As in gitignore, a leading **/ also matches directly under the source dir
+	fs := setupAnchoredTestFS(t)
+
+	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/projectname"})
+	defer cleanup()
+
+	ctx := context.Background()
+	createSnapshotRecord(ctx, t, repos, "test-snapshot")
+
+	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
+	require.NoError(t, err)
+
+	// **/projectname should exclude BOTH:
+	// - /backup/projectname/file.txt
+	// - /backup/otherproject/projectname/file.txt
+	// Total files: 4, excluded: 2
+	require.Equal(t, 2, result.FilesScanned,
+		"**/ directory pattern should match at the top level and nested")
+}
+
+func TestExcludePatterns_DoubleStarFileAtEveryDepth(t *testing.T) {
+	t.Parallel()
+
+	// As in gitignore, a leading **/ also matches directly under the source dir
+	fs := setupAnchoredTestFS(t)
+
+	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/*.txt"})
+	defer cleanup()
+
+	ctx := context.Background()
+	createSnapshotRecord(ctx, t, repos, "test-snapshot")
+
+	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
+	require.NoError(t, err)
+
+	// **/*.txt should exclude ALL .txt files:
+	// - /backup/file.txt
+	// - /backup/projectname/file.txt
+	// - /backup/otherproject/projectname/file.txt
+	// Total files: 4, excluded: 3
+	require.Equal(t, 1, result.FilesScanned,
+		"**/ file pattern should match at the top level and nested")
+}

internal/snapshot/scanner.go

@@ -135,7 +135,9 @@ type ScannerConfig struct {
 // are counted per file: BytesScanned is the size of the new and changed
 // files, BytesSkipped that of the unchanged ones. FilesFailed counts the
 // new and changed files that phase 2 could not store; FilesScanned
-// includes them and BytesScanned does not.
+// includes them and BytesScanned does not. ChunksCreated counts the
+// chunks that were not already stored, and NewChunkSize is their total
+// size.
 type ScanResult struct {
 	FilesScanned   int
 	FilesSkipped   int
@@ -145,6 +147,7 @@ type ScanResult struct {
 	BytesSkipped   int64
 	BytesDeleted   int64
 	ChunksCreated  int
+	NewChunkSize   int64
 	BlobsCreated   int
 	BlobsUploaded  int
 	BytesUploaded  int64
@@ -1295,6 +1298,11 @@ func (s *Scanner) batchAddFilesToSnapshot(
 func (s *Scanner) processPhase(
 	ctx context.Context, filesToProcess []*FileToProcess, result *ScanResult,
 ) error {
+	// On an error or cancellation the blob being packed is never
+	// finalized, so its temp file must be removed here. After a
+	// successful flush there is no such blob and this does nothing.
+	defer s.packer.DiscardCurrentBlob()
+
 	// Calculate total bytes to process
 	var totalBytes int64
 	for _, f := range filesToProcess {
@@ -1861,11 +1869,12 @@ func (s *Scanner) processFileStreaming(
 	return nil
 }
 
-// updateChunkStats counts a chunk that was not already stored. The scan
-// result's file counts, BytesScanned and BytesSkipped are not touched
-// here: the scan phase counts each file once.
+// updateChunkStats counts a chunk that was not already stored, and its
+// size. The scan result's file counts, BytesScanned and BytesSkipped are
+// not touched here: the scan phase counts each file once.
 func (s *Scanner) updateChunkStats(chunkSize int64, result *ScanResult) {
 	result.ChunksCreated++
+	result.NewChunkSize += chunkSize
 
 	if s.progress != nil {
 		s.progress.GetStats().ChunksCreated.Add(1)
@@ -2013,6 +2022,14 @@ func compileExcludePatterns(patterns []string) []compiledPattern {
 		// Remove trailing slash if present (directory indicator)
 		pattern = strings.TrimSuffix(pattern, "/")
 
+		// A leading "**/" demands a "/" before the name and so misses an
+		// entry directly under the source path. An unanchored pattern
+		// already matches at every depth, so drop the prefix: as in
+		// gitignore, "**/x" then also matches a top-level "x".
+		if !anchored {
+			pattern = strings.TrimPrefix(pattern, "**/")
+		}
+
 		// Compile the glob pattern
 		// For patterns without path separators, we need to match them as components
 		// e.g., ".git" should match ".git" anywhere in the path

internal/snapshot/skip_errors_test.go

@@ -381,3 +381,60 @@ func TestScannerCancelStopsSkipErrorsRun(t *testing.T) {
 		})
 	}
 }
+
+// TestScannerRemovesBlobTempFileWhenRunStops checks that a run stopped
+// part-way, by a file it cannot read or by a cancellation, removes the
+// temp file of the blob it was packing.
+func TestScannerRemovesBlobTempFileWhenRunStops(t *testing.T) {
+	t.Parallel()
+
+	// a.txt is backed up first and starts a blob; the run stops at b.txt.
+	const target = "/source/b.txt"
+
+	tests := []struct {
+		name  string
+		newFs func(cancel context.CancelFunc) afero.Fs
+	}{
+		{
+			name: "file cannot be read",
+			newFs: func(context.CancelFunc) afero.Fs {
+				return &readFailFs{Fs: afero.NewMemMapFs(), target: target}
+			},
+		},
+		{
+			name: "cancelled",
+			newFs: func(cancel context.CancelFunc) afero.Fs {
+				return &cancelOnOpenFs{
+					Fs: afero.NewMemMapFs(), target: target, cancel: cancel,
+				}
+			},
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			ctx, cancel := context.WithCancel(context.Background())
+			defer cancel()
+
+			fs := tt.newFs(cancel)
+			writeSkipErrorTestFile(t, fs, "/source/a.txt", "first file content")
+			writeSkipErrorTestFile(t, fs, target, "second file content")
+
+			_, err := runSkipErrorScan(ctx, t, fs, "/source", false, nil)
+			if err == nil {
+				t.Fatal("expected the scan to stop with an error, got nil")
+			}
+
+			left, err := afero.Glob(fs, filepath.Join(os.TempDir(), "vaultik-blob-*"))
+			if err != nil {
+				t.Fatalf("listing blob temp files: %v", err)
+			}
+
+			if len(left) != 0 {
+				t.Fatalf("expected no blob temp file left, got %v", left)
+			}
+		})
+	}
+}

internal/snapshot/snapshot.go

@@ -199,6 +199,7 @@ func (sm *SnapshotManager) UpdateSnapshotStatsExtended(
 			stats.CompressionLevel,
 			stats.BytesUploaded,
 			stats.UploadDurationMs,
+			stats.NewChunkSize,
 		)
 	})
 }
@@ -906,6 +907,7 @@ type ExtendedBackupStats struct {
 	BlobUncompressedSize int64 // Total uncompressed size of all referenced blobs
 	CompressionLevel     int   // Compression level used for this snapshot
 	UploadDurationMs     int64 // Total milliseconds spent uploading to S3
+	NewChunkSize         int64 // Total size of the chunks counted in ChunksCreated
 }
 
 // deleteOtherSnapshots deletes all snapshots except the current one

internal/storage/url.go

@@ -17,8 +17,10 @@ const (
 
 // Sentinel errors for storage URL parsing.
 var (
-	ErrEmptyStorageURL   = errors.New("storage URL is empty")
-	ErrEmptyFilePath     = errors.New("file URL path is empty")
+	ErrEmptyStorageURL  = errors.New("storage URL is empty")
+	ErrEmptyFilePath    = errors.New("file URL path is empty")
+	ErrRelativeFilePath = errors.New(
+		"file URL needs an absolute path, as in file:///path/to/backup")
 	ErrMissingBucket     = errors.New("s3 URL missing bucket name")
 	ErrMissingRemote     = errors.New("rclone URL missing remote name")
 	ErrUnsupportedScheme = errors.New(
@@ -51,17 +53,8 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 		return nil, ErrEmptyStorageURL
 	}
 
-	// Handle file:// URLs
 	if after, ok := strings.CutPrefix(rawURL, "file://"); ok {
-		path := after
-		if path == "" {
-			return nil, ErrEmptyFilePath
-		}
-
-		return &URL{
-			Scheme: schemeFile,
-			Prefix: path,
-		}, nil
+		return parseFileURL(after)
 	}
 
 	if strings.HasPrefix(rawURL, "s3://") {
@@ -75,6 +68,27 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 	return nil, ErrUnsupportedScheme
 }
 
+// parseFileURL parses the path that follows file://. The path must be
+// absolute: a relative one would resolve against the working directory,
+// so the destination would move with it. Percent-escapes are decoded, so
+// my%20stick names the directory "my stick"; a literal space is kept.
+func parseFileURL(rawPath string) (*URL, error) {
+	if rawPath == "" {
+		return nil, ErrEmptyFilePath
+	}
+
+	if !strings.HasPrefix(rawPath, "/") {
+		return nil, ErrRelativeFilePath
+	}
+
+	path, err := url.PathUnescape(rawPath)
+	if err != nil {
+		return nil, fmt.Errorf("invalid file URL path: %w", err)
+	}
+
+	return &URL{Scheme: schemeFile, Prefix: path}, nil
+}
+
 // parseS3URL parses an s3://bucket/prefix URL. It rejects credentials in
 // the userinfo and any query parameter other than endpoint, region and
 // ssl, so a credential-bearing URL is never stored or echoed.

internal/storage/url_parse_test.go

@@ -14,7 +14,10 @@ import (
 func TestParseStorageURLValid(t *testing.T) {
 	t.Parallel()
 
-	const bucket = "mybucket"
+	const (
+		bucket     = "mybucket"
+		fileScheme = "file"
+	)
 
 	cases := []struct {
 		name string
@@ -24,7 +27,17 @@ func TestParseStorageURLValid(t *testing.T) {
 		{
 			name: "file absolute path",
 			raw:  "file:///var/backups/vaultik",
-			want: &storage.URL{Scheme: "file", Prefix: "/var/backups/vaultik"},
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/var/backups/vaultik"},
+		},
+		{
+			name: "file percent-escaped path is decoded",
+			raw:  "file:///Volumes/my%20stick/backup",
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
+		},
+		{
+			name: "file path with a literal space",
+			raw:  "file:///Volumes/my stick/backup",
+			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
 		},
 		{
 			name: "s3 bucket and prefix, ssl defaults on",
@@ -90,6 +103,7 @@ func TestParseStorageURLErrors(t *testing.T) {
 	}{
 		{"empty url", "", storage.ErrEmptyStorageURL},
 		{"file empty path", "file://", storage.ErrEmptyFilePath},
+		{"file relative path", "file://dest", storage.ErrRelativeFilePath},
 		{"s3 missing bucket", "s3://", storage.ErrMissingBucket},
 		{"s3 missing bucket with path", "s3:///justprefix", storage.ErrMissingBucket},
 		{"rclone missing remote", "rclone://", storage.ErrMissingRemote},

internal/vaultik/blob_fetch.go

@@ -103,6 +103,8 @@ func (v *Vaultik) FetchAndDecryptBlob(
 }
 
 // FetchBlob downloads a blob and returns a reader for the encrypted data.
+// The reader is closed as soon as ctx is cancelled, which ends a read
+// blocked inside it.
 func (v *Vaultik) FetchBlob(
 	ctx context.Context, blobHash string,
 ) (io.ReadCloser, error) {
@@ -120,5 +122,47 @@ func (v *Vaultik) FetchBlob(
 		return nil, fmt.Errorf("downloading blob %s: %w", shortHash(blobHash), err)
 	}
 
-	return rc, nil
+	return newCloseOnCancelReader(ctx, rc), nil
+}
+
+// closeOnCancelReader closes the reader it wraps when ctx is cancelled.
+// Not every backend's reader stops on cancel by itself (the file
+// backend's does not), and a read stalled on a slow or hung source would
+// otherwise outlast the shutdown timeout, so the process would exit
+// before restore or deep verify removed its decrypted temporary files.
+type closeOnCancelReader struct {
+	io.ReadCloser
+
+	ctx  context.Context //nolint:containedctx // Read reports its error
+	stop func() bool
+}
+
+func newCloseOnCancelReader(
+	ctx context.Context, rc io.ReadCloser,
+) *closeOnCancelReader {
+	return &closeOnCancelReader{
+		ReadCloser: rc,
+		ctx:        ctx,
+		stop:       context.AfterFunc(ctx, func() { _ = rc.Close() }),
+	}
+}
+
+// Read returns the context's error, not the closed reader's, once ctx
+// has been cancelled.
+func (r *closeOnCancelReader) Read(p []byte) (int, error) {
+	n, err := r.ReadCloser.Read(p)
+	if err != nil && r.ctx.Err() != nil {
+		return n, r.ctx.Err()
+	}
+
+	return n, err
+}
+
+// Close closes the wrapped reader, unless the cancel already closed it.
+func (r *closeOnCancelReader) Close() error {
+	if !r.stop() {
+		return nil
+	}
+
+	return r.ReadCloser.Close()
 }

internal/vaultik/deep_verify_test.go

@@ -1,15 +1,20 @@
 package vaultik_test
 
 import (
+	"bytes"
 	"context"
+	"crypto/rand"
 	"io"
 	"os"
 	"path/filepath"
+	"slices"
 	"testing"
 
 	"github.com/spf13/afero"
 	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/config"
 	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage"
 	"sneak.berlin/go/vaultik/internal/ui"
 	"sneak.berlin/go/vaultik/internal/vaultik"
 )
@@ -77,6 +82,161 @@ func TestDeepVerifyAcceptsHealthyAndRejectsCorruptBlob(t *testing.T) {
 		"deep verify should fail on a corrupted blob")
 }
 
+// TestDeepVerifyJSONCountsBlobs checks the counts that deep verify
+// reports under --json: on a healthy snapshot, with a blob that cannot
+// be checked, with a damaged blob, with missing blobs, and with a blob
+// of the wrong size. Deep verify stops at the first damaged blob, so the
+// blobs read before it are the ones verified; when blobs are missing or
+// the wrong size it reads no blob contents, but counts every such blob.
+func TestDeepVerifyJSONCountsBlobs(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	fs := afero.NewOsFs()
+	tempDir := t.TempDir()
+
+	dataDir := filepath.Join(tempDir, "source")
+	storeDir := filepath.Join(tempDir, "remote")
+	dbPath := filepath.Join(tempDir, "index.sqlite")
+
+	chunkSize := int64(32 * 1024)
+	maxBlobSize := int64(128 * 1024)
+
+	// Random data does not compress or deduplicate, so it fills several
+	// blobs.
+	data := make([]byte, maxBlobSize*4)
+	_, err := rand.Read(data)
+	require.NoError(t, err)
+	require.NoError(t, fs.MkdirAll(dataDir, 0o755))
+	require.NoError(t, afero.WriteFile(fs,
+		filepath.Join(dataDir, "data.bin"), data, 0o644))
+
+	ctx := context.Background()
+
+	cfg, storer, snapshotID := runFileStorageBackup(
+		ctx, t, fs, dataDir, storeDir, dbPath, chunkSize, maxBlobSize)
+
+	healthy, err := deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.NoError(t, err)
+	require.Equal(t, "ok", healthy.Status)
+	require.GreaterOrEqual(t, healthy.BlobCount, 3)
+	require.Equal(t, healthy.BlobCount, healthy.Verified)
+	require.Zero(t, healthy.Missing)
+
+	// Deep verify reads blobs in hash order, which is the sorted order of
+	// their storage keys.
+	keys, err := storer.List(ctx, "blobs/")
+	require.NoError(t, err)
+	slices.Sort(keys)
+	require.Len(t, keys, healthy.BlobCount)
+
+	// A blob that is present but cannot be checked is not missing: the
+	// check stops with the storage error.
+	denied := &statDeniedStorer{Storer: storer, deniedKey: keys[0]}
+
+	got, err := deepVerifyJSON(ctx, t, cfg, denied, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Zero(t, got.Missing)
+	require.Contains(t, got.ErrorMessage, os.ErrPermission.Error())
+
+	// Damage the last blob read, keeping its length, so every blob before
+	// it is read and passes first.
+	lastPath := filepath.Join(storeDir, keys[len(keys)-1])
+	blob, err := afero.ReadFile(fs, lastPath)
+	require.NoError(t, err)
+
+	blob[len(blob)/2] ^= 0xff
+	require.NoError(t, afero.WriteFile(fs, lastPath, blob, 0o600))
+
+	got, err = deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, healthy.BlobCount-1, got.Verified)
+	require.Zero(t, got.Missing)
+
+	// Delete the first blob and the damaged last one: both must be
+	// counted as missing, not only the first one found.
+	var deletedSize int64
+
+	for _, key := range []string{keys[0], keys[len(keys)-1]} {
+		info, statErr := storer.Stat(ctx, key)
+		require.NoError(t, statErr)
+
+		deletedSize += info.Size
+
+		require.NoError(t, storer.Delete(ctx, key))
+	}
+
+	got, err = deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, 2, got.Missing)
+	require.Equal(t, deletedSize, got.MissingSize)
+	require.Zero(t, got.Verified)
+
+	// Make a blob between the two deleted ones longer: it is counted as
+	// the wrong size, and both missing blobs are still counted.
+	grownPath := filepath.Join(storeDir, keys[1])
+	blob, err = afero.ReadFile(fs, grownPath)
+	require.NoError(t, err)
+
+	blob = append(blob, []byte("extra")...)
+	require.NoError(t, afero.WriteFile(fs, grownPath, blob, 0o600))
+
+	got, err = deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, 1, got.Mismatched)
+	require.Equal(t, 2, got.Missing)
+	require.Zero(t, got.Verified)
+}
+
+// statDeniedStorer passes every call through to the wrapped Storer,
+// except that Stat of deniedKey fails with a permission error, as it
+// does for a blob that is present but cannot be read.
+type statDeniedStorer struct {
+	storage.Storer
+
+	deniedKey string
+}
+
+func (s *statDeniedStorer) Stat(
+	ctx context.Context, key string,
+) (*storage.ObjectInfo, error) {
+	if key == s.deniedKey {
+		return nil, os.ErrPermission
+	}
+
+	return s.Storer.Stat(ctx, key)
+}
+
+// deepVerifyJSON runs deep verify with --json on snapshotID and returns
+// the decoded result and the error RunDeepVerify returned.
+func deepVerifyJSON(
+	ctx context.Context, t *testing.T,
+	cfg *config.Config, storer storage.Storer, snapshotID string,
+) (vaultik.VerifyResult, error) {
+	t.Helper()
+
+	var out bytes.Buffer
+
+	v := &vaultik.Vaultik{
+		Config:  cfg,
+		Storage: storer,
+		Fs:      afero.NewOsFs(),
+		Stdout:  &out,
+		Stderr:  io.Discard,
+		UI:      ui.NewWithColor(io.Discard, false),
+	}
+	v.SetContext(ctx)
+
+	err := v.RunDeepVerify(snapshotID,
+		&vaultik.VerifyOptions{Deep: true, JSON: true})
+
+	return decodeVerifyResult(t, out.Bytes()), err
+}
+
 // corruptOneBlob flips a middle byte of the first blob file found under
 // blobsDir, leaving the file length unchanged.
 func corruptOneBlob(t *testing.T, fs afero.Fs, blobsDir string) {

internal/vaultik/helpers.go

@@ -89,22 +89,6 @@ type SnapshotInfo struct {
 	RemotePresent    *bool            `json:"remote_present"`
 }
 
-// formatBytes formats bytes in a human-readable format
-func formatBytes(bytes int64) string {
-	const unit = 1024
-	if bytes < unit {
-		return fmt.Sprintf("%d B", bytes)
-	}
-
-	div, exp := int64(unit), 0
-	for n := bytes / unit; n >= unit; n /= unit {
-		div *= unit
-		exp++
-	}
-
-	return fmt.Sprintf("%.1f %cB", float64(bytes)/float64(div), "KMGTPE"[exp])
-}
-
 // parseSnapshotTimestamp extracts the timestamp from a snapshot ID
 // Format: hostname_snapshotname_2026-01-12T14:41:15Z
 func parseSnapshotTimestamp(snapshotID string) (time.Time, error) {

internal/vaultik/new_chunk_size_test.go

@@ -0,0 +1,133 @@
+package vaultik_test
+
+import (
+	"bytes"
+	"context"
+	"maps"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/afero"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/chunker"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// TestNewChunkSizeOfChangedFileStaysFixed covers
+// https://git.eeqj.de/sneak/vaultik/issues/311. A backup whose only change
+// is a modified file lists the size of the chunks that change added as its
+// NEW CHUNK SIZE, and a later backup that changes the file again leaves
+// every earlier snapshot's figure as it was. The file's row in the local
+// index is shared by all three snapshots and rewritten by each backup.
+func TestNewChunkSizeOfChangedFileStaysFixed(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	fs := afero.NewOsFs()
+	tempDir := t.TempDir()
+	dataDir := filepath.Join(tempDir, "src")
+	dbPath := filepath.Join(tempDir, "index.sqlite")
+	changedPath := filepath.Join(dataDir, "changed.bin")
+
+	ctx := context.Background()
+	files := writeFaultSourceTree(t, fs, dataDir)
+	cfg := changedFileConfig(dataDir, dbPath)
+
+	appendRandomBytes(t, fs, files, changedPath, appendedFileSize)
+
+	store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
+	require.NoError(t, err)
+
+	db, err := database.New(ctx, dbPath)
+	require.NoError(t, err)
+	t.Cleanup(func() { _ = db.Close() })
+
+	repos := database.NewRepositories(db)
+	v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
+
+	require.NoError(t, backUp(v, "first"))
+
+	firstFiles := maps.Clone(files)
+	firstID := localSnapshotID(ctx, t, repos, "first")
+
+	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
+	require.NoError(t, backUp(v, "second"))
+
+	secondID := localSnapshotID(ctx, t, repos, "second")
+	secondAdded := sizeOfNewChunks(t, files, firstFiles)
+	require.Positive(t, secondAdded)
+	assert.Equal(t, secondAdded, listedNewChunkSizes(t, v)[secondID],
+		"the second snapshot must count the chunks the change added")
+
+	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
+	require.NoError(t, backUp(v, "third"))
+
+	sizes := listedNewChunkSizes(t, v)
+	assert.Equal(t, sizeOfNewChunks(t, firstFiles, nil), sizes[firstID],
+		"a later backup must not change the first snapshot's figure")
+	assert.Equal(t, secondAdded, sizes[secondID],
+		"a later backup must not change the second snapshot's figure")
+}
+
+// sizeOfNewChunks returns the total size of the distinct chunks of the
+// files in after that no file in before has, cut the way the backup cuts
+// them.
+func sizeOfNewChunks(t *testing.T, after, before map[string][]byte) int64 {
+	t.Helper()
+
+	known := make(map[string]bool)
+	for _, chunk := range chunksOf(t, before) {
+		known[chunk.Hash] = true
+	}
+
+	var total int64
+
+	for _, chunk := range chunksOf(t, after) {
+		if !known[chunk.Hash] {
+			known[chunk.Hash] = true
+			total += chunk.Size
+		}
+	}
+
+	return total
+}
+
+// chunksOf returns the chunks of every file in files.
+func chunksOf(t *testing.T, files map[string][]byte) []chunker.Chunk {
+	t.Helper()
+
+	c := chunker.NewChunker(faultChunkSize)
+
+	var all []chunker.Chunk
+
+	for _, content := range files {
+		chunks, err := c.ChunkReader(bytes.NewReader(content))
+		require.NoError(t, err)
+
+		all = append(all, chunks...)
+	}
+
+	return all
+}
+
+// listedNewChunkSizes runs `snapshot list --json` and returns each listed
+// snapshot's new_chunk_size by snapshot ID.
+func listedNewChunkSizes(t *testing.T, v *vaultik.Vaultik) map[string]int64 {
+	t.Helper()
+
+	var out bytes.Buffer
+
+	v.Stdout = &out
+	require.NoError(t, v.ListSnapshots(true))
+
+	sizes := make(map[string]int64)
+	for _, row := range decodeListJSON(t, out.String()) {
+		sizes[row.ID] = row.NewChunkSize
+	}
+
+	return sizes
+}

internal/vaultik/restore.go

@@ -309,11 +309,22 @@ func (v *Vaultik) restoreAllFiles(
 		return nil, err
 	}
 
-	plan, err := newRestorePlan(v.ctx, repos, files, chunkToBlobMap, blobIDToHash)
+	plan, unplanned, err := newRestorePlan(
+		v.ctx, repos, files, chunkToBlobMap, blobIDToHash)
 	if err != nil {
 		return nil, fmt.Errorf("building restore plan: %w", err)
 	}
 
+	// Ranging over files rather than the map reports them in a stable order.
+	for _, file := range files {
+		if planErr, ok := unplanned[file.ID]; ok {
+			err = v.handleRestoreFileError(plan, opts, result, file, file.ID, planErr)
+			if err != nil {
+				return nil, err
+			}
+		}
+	}
+
 	filesByID, totalBytesExpected := indexRestoreFiles(files)
 
 	v.UI.Beginf("Restoring %s files (%s) to %s.",

internal/vaultik/restore_interrupt_test.go

@@ -142,14 +142,14 @@ func TestRestoreCleansTempDirOnInterrupt(t *testing.T) {
 }
 
 // scratchEntries returns the vaultik blob-cache and snapshot-database
-// scratch entries currently present in dir.
+// scratch entries (restore's and deep verify's) currently present in dir.
 func scratchEntries(t *testing.T, dir string) []string {
 	t.Helper()
 
 	var matches []string
 
 	for _, pattern := range []string{
-		"vaultik-blobcache-*", "vaultik-restore-*",
+		"vaultik-blobcache-*", "vaultik-restore-*", "vaultik-verify-*",
 	} {
 		found, err := filepath.Glob(filepath.Join(dir, pattern))
 		require.NoError(t, err)
@@ -206,3 +206,119 @@ func TestRestoreSkipErrorsCancelDuringBlobDownload(t *testing.T) {
 	assert.NotContains(t, out.String(), srcPath,
 		"the cancel was reported as a failed file")
 }
+
+// stallingBlobStorer wraps a Storer so that every blob download hands
+// over the first half of the blob and then stalls, ignoring the context,
+// as a file:// blob on a hung USB stick or network share does. Only
+// closing the returned reader ends the stall.
+type stallingBlobStorer struct {
+	storage.Storer
+
+	once    sync.Once
+	stalled chan struct{}
+}
+
+func newStallingBlobStorer(inner storage.Storer) *stallingBlobStorer {
+	return &stallingBlobStorer{Storer: inner, stalled: make(chan struct{})}
+}
+
+func (s *stallingBlobStorer) Get(
+	ctx context.Context, key string,
+) (io.ReadCloser, error) {
+	rc, err := s.Storer.Get(ctx, key)
+	if err != nil || !strings.HasPrefix(key, "blobs/") {
+		return rc, err
+	}
+
+	blob, err := io.ReadAll(rc)
+	_ = rc.Close()
+
+	if err != nil {
+		return nil, err
+	}
+
+	// The writer is never closed, so once the first half has been read
+	// the next Read blocks until the reader is closed.
+	pr, pw := io.Pipe()
+
+	go func() {
+		_, _ = pw.Write(blob[:len(blob)/2])
+
+		s.once.Do(func() { close(s.stalled) })
+	}()
+
+	return pr, nil
+}
+
+// TestInterruptDuringStalledBlobReadCleansTempDir stops a restore and a
+// deep verify while a blob read is stalled on a source that ignores the
+// context. Stopping must end that read, so the operation unwinds and
+// removes its decrypted scratch files well within the shutdown timeout
+// (issue #325).
+//
+// Not parallel: it points TMPDIR at a private directory (via t.Setenv)
+// so it can assert on exactly the scratch files the operation created.
+func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
+	log.Initialize(log.Config{})
+
+	operations := map[string]func(v *Vaultik, snapshotID, targetDir string) error{
+		"restore": func(v *Vaultik, snapshotID, targetDir string) error {
+			return v.Restore(&RestoreOptions{
+				SnapshotID: snapshotID,
+				TargetDir:  targetDir,
+			})
+		},
+		"deep verify": func(v *Vaultik, snapshotID, _ string) error {
+			return v.RunDeepVerify(snapshotID, &VerifyOptions{Deep: true})
+		},
+	}
+
+	for name, op := range operations {
+		t.Run(name, func(t *testing.T) {
+			fs := afero.NewOsFs()
+			root := t.TempDir()
+
+			// Random content, so the blob stays large enough to stall
+			// part-way through its compressed, encrypted body.
+			cfg, storer, snapshotID, _ := backupOneFile(context.Background(),
+				t, fs, root, "a.bin", randomBytes(t, 256*1024), 0o644)
+
+			scratch := filepath.Join(root, "scratch")
+			require.NoError(t, fs.MkdirAll(scratch, 0o755))
+			t.Setenv("TMPDIR", scratch)
+
+			stalling := newStallingBlobStorer(storer)
+
+			ctx, cancel := context.WithCancel(context.Background())
+			defer cancel()
+
+			v := newRestoreVaultik(ctx, cfg, stalling, fs)
+			v.cancel = cancel
+
+			var opErr error
+
+			stop := v.StartOperation(func() {
+				opErr = op(v, snapshotID, filepath.Join(root, "restored"))
+			})
+
+			select {
+			case <-stalling.stalled:
+			case <-time.After(30 * time.Second):
+				t.Fatal("the operation never reached a blob read")
+			}
+
+			require.NotEmpty(t, scratchEntries(t, scratch),
+				"expected decrypted scratch files to exist mid-read")
+
+			stopCtx, stopCancel := context.WithTimeout(
+				context.Background(), 10*time.Second)
+			defer stopCancel()
+
+			require.True(t, stop(stopCtx),
+				"stop timed out; the stalled blob read was not interrupted")
+			require.ErrorIs(t, opErr, context.Canceled)
+			require.Empty(t, scratchEntries(t, scratch),
+				"decrypted scratch files remained after the interrupt")
+		})
+	}
+}

internal/vaultik/restore_malformed_db_test.go

@@ -61,8 +61,8 @@ func craftedFile(
 }
 
 // TestRestoreShortChunkHashInNoBlob proves a file whose short chunk hash
-// has no blob_chunks row fails restore planning and the chunk write with
-// an error.
+// has no blob_chunks row is left out of the restore plan with an error,
+// and fails the chunk write with an error.
 func TestRestoreShortChunkHashInNoBlob(t *testing.T) {
 	t.Parallel()
 
@@ -77,9 +77,11 @@ func TestRestoreShortChunkHashInNoBlob(t *testing.T) {
 	chunkToBlobMap, err := v.buildChunkToBlobMap(ctx, repos)
 	require.NoError(t, err)
 
-	_, err = newRestorePlan(ctx, repos, []*database.File{file},
+	plan, unplanned, err := newRestorePlan(ctx, repos, []*database.File{file},
 		chunkToBlobMap, map[string]string{})
-	require.ErrorIs(t, err, errPlanChunkMissing)
+	require.NoError(t, err)
+	require.ErrorIs(t, unplanned[file.ID], errPlanChunkMissing)
+	require.False(t, plan.hasPending())
 
 	fileChunks, err := repos.FileChunks.GetByFileID(ctx, file.ID)
 	require.NoError(t, err)

internal/vaultik/restore_plan.go

@@ -41,20 +41,25 @@ type restorePlan struct {
 
 // newRestorePlan builds the file→blob index for the given files. Files
 // whose chunks reference no blobs (symlinks, directories) start in the
-// ready queue immediately.
+// ready queue immediately. A file with a chunk that no blob holds cannot
+// be restored: it is left out of the plan and returned, by ID, with the
+// reason.
 func newRestorePlan(
 	ctx context.Context,
 	repos *database.Repositories,
 	files []*database.File,
 	chunkToBlobMap map[string]*database.BlobChunk,
 	blobIDToHash map[string]string,
-) (*restorePlan, error) {
+) (*restorePlan, map[types.FileID]error, error) {
 	p := &restorePlan{
 		fileBlobs: make(map[types.FileID]map[string]struct{}, len(files)),
 		blobFiles: make(map[string]map[types.FileID]struct{}),
 		ready:     make([]types.FileID, 0, len(files)),
 		cached:    make(map[string]struct{}),
 	}
+	unplanned := make(map[types.FileID]error)
+
+nextFile:
 	for _, f := range files {
 		if f.IsSymlink() || f.Mode&uint32(os.ModeDir) != 0 {
 			// No chunks to fetch — restore can run immediately.
@@ -66,7 +71,7 @@ func newRestorePlan(
 
 		fileChunks, err := repos.FileChunks.GetByFileID(ctx, f.ID)
 		if err != nil {
-			return nil, fmt.Errorf("planning %s: %w", f.Path, err)
+			return nil, nil, fmt.Errorf("planning %s: %w", f.Path, err)
 		}
 
 		blobs := make(map[string]struct{})
@@ -74,14 +79,18 @@ func newRestorePlan(
 		for _, fc := range fileChunks {
 			bc, ok := chunkToBlobMap[fc.ChunkHash.String()]
 			if !ok {
-				return nil, fmt.Errorf("planning %s: %w: %s",
-					f.Path, errPlanChunkMissing, shortHash(fc.ChunkHash.String()))
+				unplanned[f.ID] = fmt.Errorf("%w: %s",
+					errPlanChunkMissing, shortHash(fc.ChunkHash.String()))
+
+				continue nextFile
 			}
 
 			hash, ok := blobIDToHash[bc.BlobID.String()]
 			if !ok {
-				return nil, fmt.Errorf("planning %s: %w: %s",
-					f.Path, errPlanBlobIDMissing, bc.BlobID)
+				unplanned[f.ID] = fmt.Errorf("%w: %s",
+					errPlanBlobIDMissing, bc.BlobID)
+
+				continue nextFile
 			}
 
 			blobs[hash] = struct{}{}
@@ -103,7 +112,7 @@ func newRestorePlan(
 		}
 	}
 
-	return p, nil
+	return p, unplanned, nil
 }
 
 // markBlobCached records that the named blob is now resident in the

internal/vaultik/restore_skip_errors_test.go

@@ -28,7 +28,8 @@ const (
 )
 
 // missingBlobBackup is a snapshot of single-chunk files spread over two
-// blobs, with one of those blobs deleted from the store.
+// blobs, with one of those blobs lost: deleted from the store, or missing
+// from the snapshot metadata.
 type missingBlobBackup struct {
 	fs         afero.Fs
 	cfg        *config.Config
@@ -37,20 +38,39 @@ type missingBlobBackup struct {
 	restoreDir string
 	// files holds the original content by source path.
 	files map[string][]byte
-	// lost holds the source paths whose chunk is in the deleted blob.
+	// lost holds the source paths whose chunk is in the lost blob.
 	lost map[string]bool
 }
 
 // TestRestoreSkipErrorsSkipsFilesOfMissingBlob restores with SkipErrors
-// after one blob of a two-blob snapshot was deleted. Every file stored in
-// that blob must be reported as failed and left absent, every other file
-// must be restored intact, and Restore must still return an error.
+// after one blob of a two-blob snapshot was deleted from the store.
 func TestRestoreSkipErrorsSkipsFilesOfMissingBlob(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()
 
 	ctx := context.Background()
-	backup := backupThenDeleteOneBlob(ctx, t)
+	assertRestoreSkipsLostFiles(ctx, t, backupThenDeleteOneBlob(ctx, t))
+}
+
+// TestRestoreSkipErrorsSkipsFilesWithChunkInNoBlob restores with
+// SkipErrors a snapshot whose metadata lists chunks that no blob holds, as
+// earlier backup defects left behind.
+func TestRestoreSkipErrorsSkipsFilesWithChunkInNoBlob(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	assertRestoreSkipsLostFiles(ctx, t, backupThenDropOneBlobFromMetadata(ctx, t))
+}
+
+// assertRestoreSkipsLostFiles restores backup with SkipErrors. Every file
+// stored in the lost blob must be reported as failed and left absent,
+// every other file must be restored intact, and Restore must still return
+// an error.
+func assertRestoreSkipsLostFiles(
+	ctx context.Context, t *testing.T, backup *missingBlobBackup,
+) {
+	t.Helper()
 
 	var out bytes.Buffer
 
@@ -72,14 +92,14 @@ func TestRestoreSkipErrorsSkipsFilesOfMissingBlob(t *testing.T) {
 
 		if backup.lost[path] {
 			assert.Containsf(t, out.String(), path,
-				"%s needs the deleted blob and must be reported", path)
+				"%s needs the lost blob and must be reported", path)
 			assert.NoFileExists(t, restored)
 
 			continue
 		}
 
 		got, err := afero.ReadFile(backup.fs, restored)
-		require.NoErrorf(t, err, "%s does not need the deleted blob", path)
+		require.NoErrorf(t, err, "%s does not need the lost blob", path)
 		assert.Equalf(t, content, got, "%s restored with wrong content", path)
 	}
 }
@@ -103,6 +123,30 @@ func TestRestoreMissingBlobAbortsWithoutSkipErrors(t *testing.T) {
 	require.ErrorIs(t, err, storage.ErrNotFound)
 }
 
+// TestRestoreChunkInNoBlobAbortsWithoutSkipErrors checks that a chunk held
+// by no blob still ends the restore, before any file is written, when
+// SkipErrors is not set.
+func TestRestoreChunkInNoBlobAbortsWithoutSkipErrors(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	backup := backupThenDropOneBlobFromMetadata(ctx, t)
+
+	v := newReaderVaultik(ctx, backup.cfg, backup.storer, nil, backup.fs)
+
+	err := v.Restore(&vaultik.RestoreOptions{
+		SnapshotID: backup.snapshotID,
+		TargetDir:  backup.restoreDir,
+	})
+
+	require.ErrorContains(t, err, "chunk missing from blob map")
+
+	for path := range backup.files {
+		assert.NoFileExists(t, filepath.Join(backup.restoreDir, path))
+	}
+}
+
 // backupThenDeleteOneBlob backs up missingBlobFileCount single-chunk
 // files, then deletes from the store the blob holding the first of them.
 func backupThenDeleteOneBlob(
@@ -110,6 +154,54 @@ func backupThenDeleteOneBlob(
 ) *missingBlobBackup {
 	t.Helper()
 
+	backup, db, lostBlob := backupSingleChunkFiles(ctx, t)
+	require.NoError(t, db.Close())
+
+	require.NoError(t, backup.storer.Delete(ctx, fmt.Sprintf(
+		"blobs/%s/%s/%s", lostBlob[:2], lostBlob[2:4], lostBlob)))
+
+	return backup
+}
+
+// backupThenDropOneBlobFromMetadata backs up missingBlobFileCount
+// single-chunk files, then removes the blob holding the first of them from
+// the snapshot and exports the snapshot metadata again. The exported
+// metadata then lists chunks that no blob holds.
+func backupThenDropOneBlobFromMetadata(
+	ctx context.Context, t *testing.T,
+) *missingBlobBackup {
+	t.Helper()
+
+	backup, db, lostBlob := backupSingleChunkFiles(ctx, t)
+
+	// The uploads row refers to the blob row, so it would keep the export
+	// from deleting it.
+	for _, query := range []string{
+		"DELETE FROM snapshot_blobs WHERE blob_hash = ?",
+		"DELETE FROM uploads WHERE blob_hash = ?",
+	} {
+		_, err := db.Conn().ExecContext(ctx, query, lostBlob)
+		require.NoError(t, err)
+	}
+
+	sm := newFaultSnapshotManager(
+		backup.fs, backup.storer, backup.cfg, database.NewRepositories(db))
+	require.NoError(t,
+		sm.ExportSnapshotMetadata(ctx, db.Path(), backup.snapshotID))
+	require.NoError(t, db.Close())
+
+	return backup
+}
+
+// backupSingleChunkFiles backs up missingBlobFileCount single-chunk files.
+// It returns the backup, with lost naming the files stored in the same
+// blob as the first of them, the still open local index, and the hash of
+// that blob.
+func backupSingleChunkFiles(
+	ctx context.Context, t *testing.T,
+) (*missingBlobBackup, *database.DB, string) {
+	t.Helper()
+
 	fs := afero.NewOsFs()
 	tempDir := t.TempDir()
 	dataDir := filepath.Join(tempDir, "src")
@@ -143,16 +235,11 @@ func backupThenDeleteOneBlob(
 		blobOfFile[path] = blobHashOfSingleChunkFile(ctx, t, repos, path)
 	}
 
-	require.NoError(t, db.Close())
-
-	deleted := blobOfFile[filepath.Join(dataDir, "file-00.bin")]
-	require.NoError(t, storer.Delete(ctx, fmt.Sprintf(
-		"blobs/%s/%s/%s", deleted[:2], deleted[2:4], deleted)))
-
+	lostBlob := blobOfFile[filepath.Join(dataDir, "file-00.bin")]
 	lost := make(map[string]bool)
 
 	for path, hash := range blobOfFile {
-		if hash == deleted {
+		if hash == lostBlob {
 			lost[path] = true
 		}
 	}
@@ -168,7 +255,7 @@ func backupThenDeleteOneBlob(
 		restoreDir: filepath.Join(tempDir, "restored"),
 		files:      files,
 		lost:       lost,
-	}
+	}, db, lostBlob
 }
 
 // blobHashOfSingleChunkFile returns the hash of the blob holding the one

internal/vaultik/snapshot.go

@@ -209,6 +209,7 @@ type snapshotStats struct {
 	totalFiles         int
 	totalBytes         int64
 	totalChunks        int
+	newChunkSize       int64
 	totalBlobs         int
 	totalBytesSkipped  int64
 	totalFilesSkipped  int
@@ -341,6 +342,7 @@ func (v *Vaultik) scanAllDirectories(
 		stats.totalFiles += result.FilesScanned
 		stats.totalBytes += result.BytesScanned
 		stats.totalChunks += result.ChunksCreated
+		stats.newChunkSize += result.NewChunkSize
 		stats.totalBlobs += result.BlobsCreated
 		stats.totalFilesSkipped += result.FilesSkipped
 		stats.totalFilesFailed += result.FilesFailed
@@ -403,6 +405,7 @@ func (v *Vaultik) finalizeSnapshotMetadata(
 		BlobUncompressedSize: stats.blobUncompressedSize,
 		CompressionLevel:     v.Config.CompressionLevel,
 		UploadDurationMs:     stats.uploadDuration.Milliseconds(),
+		NewChunkSize:         stats.newChunkSize,
 	}
 
 	err = v.SnapshotManager.UpdateSnapshotStatsExtended(v.ctx, snapshotID, extStats)
@@ -633,7 +636,7 @@ func (v *Vaultik) confirmAndExecutePurge(
 			v.stdoutf("  %s (%s, %s)\n",
 				snap.ID,
 				snap.Timestamp.Format("2006-01-02 15:04:05"),
-				formatBytes(snap.CompressedSize))
+				ubytes(snap.CompressedSize))
 		}
 	}
 

internal/vaultik/snapshot_list.go

@@ -553,8 +553,8 @@ func (v *Vaultik) printSnapshotTable(snapshots []SnapshotInfo) error {
 
 		if snap.LocallyTracked {
 			id = snap.ID.String()
-			uncompressed = formatBytes(snap.UncompressedSize)
-			newChunks = formatBytes(snap.NewChunkSize)
+			uncompressed = ubytes(snap.UncompressedSize)
+			newChunks = ubytes(snap.NewChunkSize)
 		} else {
 			id = formatRemoteOnlyID(snap.RemoteKey)
 			uncompressed = remoteOnlyCell
@@ -564,7 +564,7 @@ func (v *Vaultik) printSnapshotTable(snapshots []SnapshotInfo) error {
 		_, err = fmt.Fprintf(w, "%s\t%s\t%s\t%s\t%s\n",
 			id,
 			snap.Timestamp.Format("2006-01-02 15:04:05"),
-			formatBytes(snap.CompressedSize),
+			ubytes(snap.CompressedSize),
 			uncompressed,
 			newChunks)
 		if err != nil {

internal/vaultik/snapshot_list_test.go

@@ -212,8 +212,8 @@ const (
 	listConfiguredName = "home"
 	listLocalID        = "testhost_home_2026-03-01T10:00:00Z"
 	listRemoteID       = "otherhost_media_2026-03-02T11:22:33Z"
-	// fiveMegabytes formats as "5.0 MB" through formatBytes.
-	fiveMegabytes = 5 * 1024 * 1024
+	// fiveMegabytes is printed as "5.0 MB" by every command.
+	fiveMegabytes = 5_000_000
 )
 
 // TestListSnapshots_RemoteWithoutSecretKey is the regression guard for
@@ -306,6 +306,48 @@ func TestListSnapshots_RemoteOnlyRowRendering(t *testing.T) {
 		"are not in the local index")
 }
 
+// TestSnapshotListAndPurgePrintSizesLikeRemoteInfo checks that the
+// `snapshot list` table and the purge listing print a byte count the way
+// `remote info` does: in powers of 1000, as the MB label says.
+func TestSnapshotListAndPurgePrintSizesLikeRemoteInfo(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	const wantSize = "5.0 MB" // fiveMegabytes
+
+	env := newListEnv(t)
+
+	// A remote-only snapshot: `snapshot list` and `remote info` both take
+	// its size from the manifest.
+	remoteKey := env.addRemote(t, listRemoteID,
+		time.Date(2026, 3, 2, 11, 22, 33, 0, time.UTC))
+
+	// A locally tracked snapshot of the same size for the purge to list.
+	// The purge prints the snapshot's blob size, the last argument here.
+	start := time.Date(2026, 3, 1, 10, 0, 0, 0, time.UTC)
+	env.addLocal(t, listLocalID, start)
+	env.addRemote(t, listLocalID, start)
+	require.NoError(t, env.v.Repositories.Snapshots.UpdateCounts(
+		context.Background(), nil, listLocalID, 0, 0, 0, 0, fiveMegabytes))
+
+	require.NoError(t, env.v.RemoteInfo(false))
+	assert.Contains(t, findTableRow(t, env.stdout.String(), remoteKey[:16]),
+		wantSize, "remote info")
+
+	env.stdout.Reset()
+	require.NoError(t, env.v.ListSnapshots(false))
+	assert.Contains(t, findTableRow(t, env.stdout.String(),
+		"<remote only:"+remoteKey[:12]+">"), wantSize, "snapshot list")
+
+	// Without --force and with nothing on stdin the purge lists what it
+	// would delete, reads no confirmation, and deletes nothing.
+	env.stdout.Reset()
+	require.NoError(t, env.v.PurgeSnapshotsWithOptions(
+		&vaultik.SnapshotPurgeOptions{OlderThan: "1d"}))
+	assert.Contains(t, findTableRow(t, env.stdout.String(), listLocalID),
+		wantSize, "snapshot purge")
+}
+
 // findTableRow returns the single output line containing needle.
 func findTableRow(t *testing.T, out, needle string) string {
 	t.Helper()
@@ -445,6 +487,7 @@ type listJSONRow struct {
 	RemoteKey      string `json:"remote_key"`
 	Timestamp      string `json:"timestamp"`
 	CompressedSize int64  `json:"compressed_size"`
+	NewChunkSize   int64  `json:"new_chunk_size"`
 	LocallyTracked bool   `json:"locally_tracked"`
 	RemotePresent  *bool  `json:"remote_present"`
 }

internal/vaultik/verify.go

@@ -17,6 +17,7 @@ import (
 	"sneak.berlin/go/vaultik/internal/database"
 	"sneak.berlin/go/vaultik/internal/log"
 	"sneak.berlin/go/vaultik/internal/snapshot"
+	"sneak.berlin/go/vaultik/internal/storage"
 )
 
 // Sentinel errors for snapshot verification failures.
@@ -32,7 +33,9 @@ var (
 	errManifestExtraBlob   = errors.New("manifest contains blob not in database")
 	errManifestMissingBlob = errors.New(
 		"manifest omits blob present in database")
-	errBlobSizeMismatch = errors.New("blob size mismatch")
+	errBlobSizeMismatch  = errors.New("blob size mismatch")
+	errBlobsNotInStorage = errors.New(
+		"blobs missing from storage or stored with the wrong size")
 )
 
 // verifyStatusFailed is the JSON status value for a failed verification.
@@ -135,7 +138,6 @@ func (v *Vaultik) RunDeepVerify(snapshotID string, opts *VerifyOptions) error {
 	}
 
 	result.Status = "ok"
-	result.Verified = len(dbBlobs)
 
 	if opts.JSON {
 		return v.outputVerifyJSON(result)
@@ -290,7 +292,7 @@ func (v *Vaultik) runVerificationSteps(
 		v.stdoutf("Checking blob existence in remote storage...\n")
 	}
 
-	err = v.verifyBlobExistenceFromDB(dbBlobs)
+	err = v.verifyBlobExistenceFromDB(dbBlobs, result)
 	if err != nil {
 		return v.deepVerifyFailure(result, opts, err.Error(), err)
 	}
@@ -301,7 +303,8 @@ func (v *Vaultik) runVerificationSteps(
 			len(dbBlobs), ubytes(totalSize))
 	}
 
-	err = v.performDeepVerificationFromDB(dbBlobs, tdb.db.Conn(), opts, identities)
+	err = v.performDeepVerificationFromDB(
+		dbBlobs, tdb.db.Conn(), opts, result, identities)
 	if err != nil {
 		return v.deepVerifyFailure(result, opts, err.Error(), err)
 	}
@@ -653,8 +656,14 @@ func (v *Vaultik) verifyManifestAgainstDatabase(
 	return nil
 }
 
-// verifyBlobExistenceFromDB checks that all blobs from database exist in S3
-func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
+// verifyBlobExistenceFromDB checks that every blob from the database is
+// in storage with the size the database records. It checks them all,
+// counting the missing and wrong-size blobs in result, and fails if it
+// found any. Any storage error other than not found stops the check and
+// fails with that error.
+func (v *Vaultik) verifyBlobExistenceFromDB(
+	blobs []snapshot.BlobInfo, result *VerifyResult,
+) error {
 	log.Info("Verifying blob existence in S3", "blob_count", len(blobs))
 
 	for i, blob := range blobs {
@@ -667,17 +676,23 @@ func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
 		// Construct blob path
 		blobPath := fmt.Sprintf("blobs/%s/%s/%s", blob.Hash[:2], blob.Hash[2:4], blob.Hash)
 
-		// Check blob exists
 		stat, err := v.Storage.Stat(v.ctx, blobPath)
-		if err != nil {
-			return fmt.Errorf("blob %s missing from storage: %w", blob.Hash, err)
-		}
+		switch {
+		case errors.Is(err, storage.ErrNotFound):
+			log.Warn("Blob missing from storage", "hash", blob.Hash)
 
-		// Verify size matches
-		if stat.Size != blob.CompressedSize {
-			return fmt.Errorf(
-				"%w: blob %s: S3 has %d bytes, database has %d bytes",
-				errBlobSizeMismatch, blob.Hash, stat.Size, blob.CompressedSize)
+			result.Missing++
+			result.MissingSize += blob.CompressedSize
+		case err != nil:
+			return fmt.Errorf("checking blob %s in storage: %w",
+				blob.Hash, err)
+		case stat.Size != blob.CompressedSize:
+			log.Warn("Blob has the wrong size in storage",
+				"hash", blob.Hash,
+				"storage_size", stat.Size,
+				"database_size", blob.CompressedSize)
+
+			result.Mismatched++
 		}
 
 		// Progress update every 100 blobs
@@ -691,16 +706,22 @@ func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
 		}
 	}
 
+	if result.Missing > 0 || result.Mismatched > 0 {
+		return fmt.Errorf("%w: %d missing, %d with the wrong size",
+			errBlobsNotInStorage, result.Missing, result.Mismatched)
+	}
+
 	log.Info("✓ All blobs exist in storage")
 
 	return nil
 }
 
 // performDeepVerificationFromDB downloads and verifies the content of
-// each blob using the database as source.
+// each blob using the database as source, stopping at the first blob that
+// fails. Each blob that passes is counted in result.Verified.
 func (v *Vaultik) performDeepVerificationFromDB(
 	blobs []snapshot.BlobInfo, db *sql.DB, opts *VerifyOptions,
-	identities []age.Identity,
+	result *VerifyResult, identities []age.Identity,
 ) error {
 	// Calculate total bytes for ETA
 	var totalBytesExpected int64
@@ -723,6 +744,7 @@ func (v *Vaultik) performDeepVerificationFromDB(
 			return fmt.Errorf("blob %s verification failed: %w", blobInfo.Hash, err)
 		}
 
+		result.Verified++
 		bytesProcessed += blobInfo.CompressedSize
 		elapsed := time.Since(startTime)
 		remaining := len(blobs) - (i + 1)