README.md

@@ -22,13 +22,15 @@ fields, which come a little later, and the metrics endpoint and the header size
 and the idle time as settings, which come last in it. So are the four parts of
 the stage after it: the rule files, with the bans for a clear sign of attack,
 the other admin endpoints, alerts to all three destinations, a JSON webhook,
-Slack and ntfy, and remote log sending. So are two parts of the stage after
+Slack and ntfy, and remote log sending. So are three parts of the stage after
 that: the AS number and country of every client, looked up through GeoJS or in
-the IPinfo Lite database file, and the byte limits. `smallwebwaf` passes each
+the IPinfo Lite database file, the byte limits, and the biased thresholds, lower
+limits for the AS numbers and countries you list. `smallwebwaf` passes each
 request to the app and the app's answer back, unchanged, within its timeouts and
 size limits, works out each client's address, looks up its AS number and country
 unless you switch that off, bans a client that sends too many requests or too
-many bytes, not counting those for the paths you choose, refuses a client that
+many bytes, not counting those for the paths you choose, with lower limits for
+the clients of the AS numbers and countries you list, refuses a client that
 comes from a country you refuse or from a network you refuse, lets the networks
 you choose through, checks each request against the rule files and bans a client
 whose request is a clear sign of attack, keeps its bans, each client's counters
@@ -120,6 +122,19 @@ in `bin/state` unless `SWWAF_STATE_DIR` is set, and the default rule file of
   They leave out what the rate limits leave out: a client in `SWWAF_ALLOW_NETS`
   or `SWWAF_RATE_LIMIT_EXEMPT_NETS`, and a request for a path
   `SWWAF_RATE_LIMIT_EXEMPT_PATHS` exempts.
+- Gives the clients of the AS numbers and countries the biased thresholds list,
+  `SWWAF_ASN_LIMIT_PERCENT` and `SWWAF_COUNTRY_LIMIT_PERCENT`, the percentage
+  they give of every rate limit and byte limit, so that the same rules ban them
+  after fewer requests, and, while `SWWAF_UNKNOWN_LIMIT_PERCENT` is below 100,
+  every client without a country that percentage. A client to which several
+  apply gets the lowest. `SWWAF_ASN_BYTES_PERCENT` and
+  `SWWAF_COUNTRY_BYTES_PERCENT` give the AS numbers and countries they list a
+  percentage of the byte limits in place of the other two. Each client is
+  counted on its own, against its own lowered limits: no budget is shared by a
+  whole AS number or country, which one abuser could use up and so lock out
+  everyone else there. The log line of each request the rate limits count gives
+  its client's percentages below 100 and the settings that gave them, and so do
+  the notes of a ban for a lowered limit, and its alert.
 - Bans a client that breaks a rate limit or a byte limit, as "Bans" in
   [`SPEC.md`](SPEC.md) describes: the first ban lasts an hour, and a limit
   broken again within a day of a ban ending bans for three times as long as that
@@ -131,17 +146,18 @@ in `bin/state` unless `SWWAF_STATE_DIR` is set, and the default rule file of
   the client is not looked up, and is not counted for the rate limits. A ban
   sets the client's counters back to zero. Each ban carries notes for deciding
   whether to lift it: the limit, whether it is on requests or bytes, its window
-  and the requests or bytes counted in it, the request that broke it, the
+  and the requests or bytes counted in it, the client's percentage of that kind
-  client's AS number, AS name and country once they are looked up, the
+  of limit and the setting that gave it when a biased threshold lowered the
-  netblock's requests since it was first seen, how many of them the ban has
+  limit, the request that broke it, the client's AS number, AS name and country
-  refused, and how many bans the netblock had before, for a broken limit, for a
+  once they are looked up, the netblock's requests since it was first seen, how
-  clear sign of attack and by an admin. At most `SWWAF_MAX_BANS` bans
+  many of them the ban has refused, and how many bans the netblock had before,
-  `smallwebwaf` made are kept, past, active and permanent; past that, the
+  for a broken limit, for a clear sign of attack and by an admin. At most
-  earliest such ban of the netblock that has gone longest without a request is
+  `SWWAF_MAX_BANS` bans `smallwebwaf` made are kept, past, active and permanent;
-  dropped first. The bans whose cause is `admin`, those you make or keep, are
+  past that, the earliest such ban of the netblock that has gone longest without
-  kept besides, and never dropped. `bans.json` shows the bans and their notes, a
+  a request is dropped first. The bans whose cause is `admin`, those you make or
-  restart lifts none, and you make, keep or lift a ban by editing it (see "State
+  keep, are kept besides, and never dropped. `bans.json` shows the bans and
-  files" below).
+  their notes, a restart lifts none, and you make, keep or lift a ban by editing
+  it (see "State files" below).
 - Checks each request against the rules of the rule files (see "Rule files"
   below) after the rate limits, and before its body is read. A `log` rule that
   matches is noted in the log line; a `block` rule refuses the request with
@@ -163,10 +179,11 @@ in `bin/state` unless `SWWAF_STATE_DIR` is set, and the default rule file of
   AS number lookup" below), for the request log, the client's history, the notes
   of its bans, their alerts and the metrics. The file answers at once. With
   GeoJS, a request waits for its client's first answer only while a setting acts
-  on it, a country list or `SWWAF_ADD_LOOKUP_HEADERS`. Otherwise it goes on at
+  on it, a country list, `SWWAF_ADD_LOOKUP_HEADERS` or a biased threshold that
-  once, and the answer reaches the client's history and the notes of its bans
+  lowers a limit. Otherwise it goes on at once, and the answer reaches the
-  when it comes, but not the log lines of the requests that went on without it,
+  client's history and the notes of its bans when it comes, but not the log
-  nor the alerts already raised for those bans.
+  lines of the requests that went on without it, nor the alerts already raised
+  for those bans.
 - Refuses a request from a country you refuse with `SWWAF_BAN_RESPONSE`, as soon
   as the client's country is known and before its body is read; such a request
   is not counted for the rate limits. A client on a private, loopback or
@@ -312,9 +329,10 @@ effective settings are logged at start.
   country are looked up: `geojs`, the GeoJS web service, which is then told the
   address of every new visitor, `file`, the IPinfo Lite database file
   `SWWAF_LOOKUP_DB_PATH` names, or `off`, which looks up no client and sends no
-  address to GeoJS. With `off`, a country list that is not empty, or
+  address to GeoJS. With `off`, a country list that is not empty,
-  `SWWAF_ADD_LOOKUP_HEADERS` set to `true`, stops the start, with a message
+  `SWWAF_ADD_LOOKUP_HEADERS` set to `true`, or a biased threshold that lowers a
-  naming it and `SWWAF_LOOKUP_SOURCE`.
+  limit, a list of them that is not empty or `SWWAF_UNKNOWN_LIMIT_PERCENT` below
+  100, stops the start, with a message naming it and `SWWAF_LOOKUP_SOURCE`.
 - `SWWAF_LOOKUP_DB_PATH` (default empty): the IPinfo Lite database file, in its
   `.mmdb` form, for `SWWAF_LOOKUP_SOURCE=file`. `file` without it, or it with
   any other `SWWAF_LOOKUP_SOURCE`, the default included, stops the start, with a
@@ -334,6 +352,24 @@ effective settings are logged at start.
   countries whose clients get through, for example `us,de`. A client whose
   country cannot be found is refused too, so that new clients are not let in
   whenever GeoJS stops answering.
+- `SWWAF_ASN_LIMIT_PERCENT` (default empty): AS numbers, each with the
+  percentage of every rate limit and byte limit its clients get, such as
+  `AS14061:50,AS16276:50,AS45102:25`. A lowered limit is rounded down to a whole
+  number: half of 1000 requests a minute is 500, and half of 5 is 2. `0` is a
+  zero allowance: the client's first request breaks a limit, and bans it.
+- `SWWAF_COUNTRY_LIMIT_PERCENT` (default empty): the same by country, such as
+  `cn:25,ru:50`.
+- `SWWAF_ASN_BYTES_PERCENT` and `SWWAF_COUNTRY_BYTES_PERCENT` (default empty):
+  the same for the byte limits alone. For an AS number or a country one of them
+  lists, its percentage takes the place, for the byte limits, of the one
+  `SWWAF_ASN_LIMIT_PERCENT` or `SWWAF_COUNTRY_LIMIT_PERCENT` gives, so that
+  `SWWAF_ASN_LIMIT_PERCENT=AS14061:50` with
+  `SWWAF_ASN_BYTES_PERCENT=AS14061:100` halves that AS number's rate limits and
+  leaves its byte limits whole.
+- `SWWAF_UNKNOWN_LIMIT_PERCENT` (default `100`): the percentage of every limit a
+  client without a country gets: one the lookup cannot place, one on a private,
+  loopback or link-local address, which is never looked up, and one whose answer
+  from GeoJS has not come in time.
 - `SWWAF_BAN_RESPONSE` (default `403`): how a refused client is answered, one
   that is banned, breaks a rate limit, matches a `ban` rule, is in
   `SWWAF_DENY_NETS` or comes from a refused country: `403`, `429`, or `close` to
@@ -445,11 +481,15 @@ Netblocks are in CIDR form, and a bare address stands for itself alone.
 Countries are the two-letter codes ISO 3166-1 assigns today, and `xk` for
 Kosovo, in either case (`de` and `DE` are the same); any other code, such as
 `nk` (North Korea is `kp`) or the withdrawn `su`, stops the start, and so does a
-code on both country lists. `off` switches a timeout, a size limit, a rate
+code on both country lists. AS numbers are `AS` and the number, in either case.
-limit, a byte limit, `SWWAF_ALERT_COOLDOWN` or `SWWAF_ALERT_MAX_PER_HOUR` off;
+Percentages are whole numbers from 0 to 100, and an entry of a list of them is
-`SWWAF_CLIENT_REQUEST_HEADER_MAX_BYTES`, `SWWAF_LOOKUP_TIMEOUT`, the ban
+an AS number or a country, `:` and a percentage; an AS number or a country
-settings, the state settings, `SWWAF_METRICS_TOP_N` and
+listed twice in one of them stops the start. `off` switches a timeout, a size
-`SWWAF_LOG_REMOTE_BUFFER` cannot be off.
+limit, a rate limit, a byte limit, `SWWAF_ALERT_COOLDOWN` or
+`SWWAF_ALERT_MAX_PER_HOUR` off; `SWWAF_CLIENT_REQUEST_HEADER_MAX_BYTES`,
+`SWWAF_LOOKUP_TIMEOUT`, `SWWAF_UNKNOWN_LIMIT_PERCENT`, the ban settings, the
+state settings, `SWWAF_METRICS_TOP_N` and `SWWAF_LOG_REMOTE_BUFFER` cannot be
+off.
 
 Several limits are fixed rather than settings. At most 20,000 clients are kept,
 with their counters and history, and an IPv6 client is counted by its /64. At
@@ -550,6 +590,12 @@ which every line has.
   `denied`, `banned`, `country_denied`, `rate_limited` or `rule_blocked`.
   `action` then names what was done: `forward` for a request passed to the app,
   and another action, such as `too_large`, for one a size or time limit refused.
+- `limit_percent` is there for a request the rate limits count whose client a
+  biased threshold gives less than the whole of the rate limits, and gives the
+  percentage it gets, with `limit_percent_setting` naming the setting that gave
+  it, such as `SWWAF_ASN_LIMIT_PERCENT`. `bytes_percent` and
+  `bytes_percent_setting` are the same for the byte limits. Each is left out
+  when the client gets the whole of those limits.
 - `counts` gives the client's requests in the minute, the hour and the day as
   the rate limits count them, this request included: in each window, those in
   the bucket under way and a share of those in the bucket before, so a count can
@@ -798,7 +844,10 @@ entries by client address, but for the alerts waiting, with times in UTC.
   `bytes per hour over the limit of 21474836480`, or the rule that matched, such
   as `matched the rule env-file`; for yours, what you wrote. Its `lifted` is
   when you lifted it, and is left out until you do. The `kind` in the notes of a
-  ban for a broken limit is `requests` or `bytes`, what the limit is on.
+  ban for a broken limit is `requests` or `bytes`, what the limit is on. For a
+  limit a biased threshold lowered, the reason and the notes' `limit` give the
+  lowered limit, and the notes' `limit_percent` and `limit_percent_setting` the
+  client's percentage of that kind of limit and the setting that gave it.
 - `clients.json`: each client's two buckets of requests in the minute, the hour
   and the day, its two buckets of bytes in each, `minute_bytes`, `hour_bytes`
   and `day_bytes`, and its history: when it was first and last seen, its AS
@@ -1025,9 +1074,9 @@ scraped, and keeps this one as `exported_instance` unless the scrape sets
 - `smallwebwaf_geojs_requests_total`: the requests to GeoJS;
   `smallwebwaf_geojs_failures_total`: those that failed, an answer that leaves
   out an address asked about included; and `smallwebwaf_geojs_unanswered_total`:
-  the requests that needed their client's answer, for a country list or
+  the requests that needed their client's answer, for a country list,
-  `SWWAF_ADD_LOOKUP_HEADERS`, and went on without it because GeoJS had not given
+  `SWWAF_ADD_LOOKUP_HEADERS` or a biased threshold, and went on without it
-  it in time.
+  because GeoJS had not given it in time.
 - While `SWWAF_LOOKUP_SOURCE` is `file`,
   `smallwebwaf_lookup_database_last_read_timestamp_seconds`: when the lookup
   database in use was read; and
@@ -1355,20 +1404,21 @@ memory and in `lookups.json`, so that it survives a restart, and a visitor whose
 answer is kept is not asked about again.
 
 A request waits for its client's first answer only while a setting acts on it
-before the request goes on: a country list, or `SWWAF_ADD_LOOKUP_HEADERS`. A new
+before the request goes on: a country list, `SWWAF_ADD_LOOKUP_HEADERS`, or a
-visitor then waits up to `SWWAF_LOOKUP_TIMEOUT`, a second by default, and
+biased threshold that lowers a limit. A new visitor then waits up to
-without an answer counts as coming from an unknown country until the answer
+`SWWAF_LOOKUP_TIMEOUT`, a second by default, and without an answer counts as
-arrives. Otherwise no request waits: it goes on at once and is logged without
+coming from an unknown country until the answer arrives. Otherwise no request
-the answer, which reaches the client's history and the notes of its bans when it
+waits: it goes on at once and is logged without the answer, which reaches the
-comes. The addresses waiting are asked about together, up to 200 in one request,
+client's history and the notes of its bans when it comes. The addresses waiting
-one request at a time; at most 10,000 visitors wait, and one more is not asked
+are asked about together, up to 200 in one request, one request at a time; at
-about until there is room, counting meanwhile as coming from an unknown country.
+most 10,000 visitors wait, and one more is not asked about until there is room,
-GeoJS publishes no rate limit but may block a caller it thinks asks too much.
+counting meanwhile as coming from an unknown country. GeoJS publishes no rate
-While GeoJS fails, visitors with a kept answer are unaffected and new ones count
+limit but may block a caller it thinks asks too much. While GeoJS fails,
-as coming from an unknown country, which `SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES`
+visitors with a kept answer are unaffected and new ones count as coming from an
-refuses. GeoJS is then left alone for a second, twice as long after each further
+unknown country, which `SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES` refuses, and whose
-failure up to five minutes, and asked again by the next request from a visitor
+limits `SWWAF_UNKNOWN_LIMIT_PERCENT` sets. GeoJS is then left alone for a
-without an answer.
+second, twice as long after each further failure up to five minutes, and asked
+again by the next request from a visitor without an answer.
 
 To keep your visitors' addresses on your own host, set
 `SWWAF_LOOKUP_SOURCE=off`, or use the database file instead of GeoJS:
@@ -1397,8 +1447,9 @@ service that uses the database through `smallwebwaf` should carry that link.
 Neither source can place a private address, so a client on one, such as a
 visitor on your local network, another container or your monitoring, has no
 country: `SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES` refuses it unless you list it in
-`SWWAF_ALLOW_NETS`, and `SWWAF_DENIED_COUNTRIES` does not refuse it. Such
+`SWWAF_ALLOW_NETS`, `SWWAF_DENIED_COUNTRIES` does not refuse it, and
-addresses are never sent to GeoJS.
+`SWWAF_UNKNOWN_LIMIT_PERCENT` sets its limits. Such addresses are never sent to
+GeoJS.
 
 ## How the code is laid out
 

internal/bans/bans.go

@@ -108,6 +108,12 @@ type Notes struct {
 	Limit  int64   `json:"limit,omitempty"`
 	Window string  `json:"window,omitempty"`
 	Count  float64 `json:"count,omitempty"`
+	// LimitPercent and LimitPercentSetting are, for a ban for a limit a
+	// biased threshold lowered, the client's percentage of that kind of
+	// limit, of which Limit is the result, and the setting that gave it.
+	// Both are left out for a limit that was not lowered.
+	LimitPercent        *int64 `json:"limit_percent,omitempty"`
+	LimitPercentSetting string `json:"limit_percent_setting,omitempty"`
 	// RuleID and Target are, for a ban for a clear sign of attack, the id
 	// of the rule file rule that matched, and its target.
 	RuleID string `json:"rule_id,omitempty"`

internal/config/config.go

@@ -120,6 +120,22 @@ type Config struct {
 	// capitals, as GeoJS gives them.
 	DeniedCountries             []string
 	ExclusivelyAllowedCountries []string
+	// The biased thresholds. ASNLimitPercent and CountryLimitPercent give
+	// the clients of the AS numbers and the countries they list that
+	// percentage of every rate limit and byte limit
+	// (SWWAF_ASN_LIMIT_PERCENT and SWWAF_COUNTRY_LIMIT_PERCENT).
+	// ASNBytesPercent and CountryBytesPercent give those they list a
+	// percentage of the byte limits in place of that one
+	// (SWWAF_ASN_BYTES_PERCENT and SWWAF_COUNTRY_BYTES_PERCENT). Each holds
+	// percentages from 0 to 100, by AS number, written as AS64496, or by
+	// country, a two-letter code in capitals, as the lookup gives them.
+	// UnknownLimitPercent is the percentage of every limit a client without
+	// a country gets (SWWAF_UNKNOWN_LIMIT_PERCENT).
+	ASNLimitPercent     map[string]int64
+	CountryLimitPercent map[string]int64
+	ASNBytesPercent     map[string]int64
+	CountryBytesPercent map[string]int64
+	UnknownLimitPercent int64
 	// BanResponse is the status a refused client is answered with, 403
 	// or 429, or 0 to close the connection without an answer
 	// (SWWAF_BAN_RESPONSE). It answers a banned client, a request that
@@ -300,6 +316,11 @@ var (
 			"source_failure or file_error")
 	errNotNumberOrOff = errors.New("is not a whole number above zero, such as 60, or off")
 	errNotUTF8        = errors.New("is not valid UTF-8")
+	errNotASN         = errors.New("is not an AS number such as AS64496")
+	errNotPercentItem = errors.New(
+		"is not a code, : and a percentage, such as AS64496:50 or cn:25")
+	errNotPercent  = errors.New("is not a percentage, a whole number from 0 to 100")
+	errListedTwice = errors.New("is listed twice")
 )
 
 // FromEnvironment reads the settings with lookupEnv, normally
@@ -307,6 +328,8 @@ var (
 // named by the setting's name with _FILE added names the file, which is
 // read now (see lookup). A setting that is not set takes its default. A
 // setting that is set but invalid is an error that names it.
+//
+//nolint:funlen // one line for each setting, a list that grows with them
 func FromEnvironment(lookupEnv func(string) (string, bool)) (*Config, error) {
 	env := &environment{lookupEnv: lookupEnv}
 	cfg := &Config{
@@ -342,6 +365,11 @@ func FromEnvironment(lookupEnv func(string) (string, bool)) (*Config, error) {
 		DeniedCountries:         env.countries("SWWAF_DENIED_COUNTRIES", ""),
 		ExclusivelyAllowedCountries: env.countries(
 			"SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES", ""),
+		ASNLimitPercent:      env.percents("SWWAF_ASN_LIMIT_PERCENT", parseASN),
+		CountryLimitPercent:  env.percents("SWWAF_COUNTRY_LIMIT_PERCENT", parseCountry),
+		ASNBytesPercent:      env.percents("SWWAF_ASN_BYTES_PERCENT", parseASN),
+		CountryBytesPercent:  env.percents("SWWAF_COUNTRY_BYTES_PERCENT", parseCountry),
+		UnknownLimitPercent:  env.percent("SWWAF_UNKNOWN_LIMIT_PERCENT", "100"),
 		BanResponse:          env.banResponse("SWWAF_BAN_RESPONSE", "403"),
 		LimitBanDuration:     env.durationNotOff("SWWAF_LIMIT_BAN_DURATION", "1h"),
 		LimitBanRepeatWindow: env.durationNotOff("SWWAF_LIMIT_BAN_REPEAT_WINDOW", "24h"),
@@ -592,6 +620,25 @@ func (e *environment) countries(name, defaultValue string) []string {
 	return countries
 }
 
+// percents reads a setting that is a list of AS numbers or countries,
+// which parseCode reads, each with a percentage. It is empty by default.
+func (e *environment) percents(
+	name string, parseCode func(string) (string, error),
+) map[string]int64 {
+	percents, err := parsePercents(e.value(name, ""), parseCode)
+	e.check(name, err)
+
+	return percents
+}
+
+// percent reads a setting that is a percentage, from 0 to 100.
+func (e *environment) percent(name, defaultValue string) int64 {
+	percent, err := parsePercent(e.value(name, defaultValue))
+	e.check(name, err)
+
+	return percent
+}
+
 // lookupSource reads the setting that is where clients are looked up:
 // geojs, file, or off.
 func (e *environment) lookupSource(name, defaultValue string) string {
@@ -619,7 +666,9 @@ func (e *environment) checkLookupDBPath(cfg *Config) {
 
 // checkCountriesAndLookups refuses a country on both country lists, and,
 // while SWWAF_LOOKUP_SOURCE is off, each setting that needs clients looked
-// up: the country lists and SWWAF_ADD_LOOKUP_HEADERS.
+// up: the country lists, SWWAF_ADD_LOOKUP_HEADERS, and the biased
+// thresholds, of which SWWAF_UNKNOWN_LIMIT_PERCENT needs them only below
+// 100, where it lowers a limit.
 func (e *environment) checkCountriesAndLookups(cfg *Config) {
 	for _, country := range cfg.ExclusivelyAllowedCountries {
 		if slices.Contains(cfg.DeniedCountries, country) {
@@ -639,6 +688,11 @@ func (e *environment) checkCountriesAndLookups(cfg *Config) {
 		{"SWWAF_DENIED_COUNTRIES", len(cfg.DeniedCountries) > 0},
 		{"SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES", len(cfg.ExclusivelyAllowedCountries) > 0},
 		{"SWWAF_ADD_LOOKUP_HEADERS", cfg.AddLookupHeaders},
+		{"SWWAF_ASN_LIMIT_PERCENT", len(cfg.ASNLimitPercent) > 0},
+		{"SWWAF_COUNTRY_LIMIT_PERCENT", len(cfg.CountryLimitPercent) > 0},
+		{"SWWAF_ASN_BYTES_PERCENT", len(cfg.ASNBytesPercent) > 0},
+		{"SWWAF_COUNTRY_BYTES_PERCENT", len(cfg.CountryBytesPercent) > 0},
+		{"SWWAF_UNKNOWN_LIMIT_PERCENT", cfg.UnknownLimitPercent < 100},
 	} {
 		if setting.set {
 			e.check(setting.name, fmt.Errorf("is set while SWWAF_LOOKUP_SOURCE is off; %w",
@@ -1148,13 +1202,12 @@ func parseCountries(value string) ([]string, error) {
 		return nil, err
 	}
 
-	known := strings.Fields(countryCodes)
 	countries := make([]string, 0, len(items))
 
 	for _, item := range items {
-		country := strings.ToUpper(item)
+		country, err := parseCountry(item)
-		if !slices.Contains(known, country) {
+		if err != nil {
-			return nil, fmt.Errorf("%q %w", item, errNotCountry)
+			return nil, err
 		}
 
 		countries = append(countries, country)
@@ -1163,6 +1216,81 @@ func parseCountries(value string) ([]string, error) {
 	return countries, nil
 }
 
+// parseCountry reads a country code in either case, and returns it in
+// capitals.
+func parseCountry(value string) (string, error) {
+	country := strings.ToUpper(value)
+	if !slices.Contains(strings.Fields(countryCodes), country) {
+		return "", fmt.Errorf("%q %w", value, errNotCountry)
+	}
+
+	return country, nil
+}
+
+// parseASN reads an AS number such as AS64496, in either case, and
+// returns it as the lookup gives it: AS and the number, in capitals and
+// without leading zeros.
+func parseASN(value string) (string, error) {
+	digits, hasAS := strings.CutPrefix(strings.ToUpper(value), "AS")
+
+	number, err := strconv.ParseUint(digits, 10, 32)
+	if !hasAS || err != nil {
+		return "", fmt.Errorf("%q %w", value, errNotASN)
+	}
+
+	return "AS" + strconv.FormatUint(number, 10), nil
+}
+
+// parsePercents reads a comma-separated list of items, each an AS number
+// or a country, which parseCode reads, then : and a percentage, such as
+// AS64496:50 or cn:25, and returns each one's percentage. An empty value
+// is an empty list. An AS number or country listed twice is an error.
+func parsePercents(
+	value string, parseCode func(string) (string, error),
+) (map[string]int64, error) {
+	items, err := parseList(value)
+	if err != nil {
+		return nil, err
+	}
+
+	percents := make(map[string]int64, len(items))
+
+	for _, item := range items {
+		codeText, percentText, found := strings.Cut(item, ":")
+		if !found {
+			return nil, fmt.Errorf("%q %w", item, errNotPercentItem)
+		}
+
+		code, err := parseCode(codeText)
+		if err != nil {
+			return nil, err
+		}
+
+		percent, err := parsePercent(percentText)
+		if err != nil {
+			return nil, err
+		}
+
+		if _, listed := percents[code]; listed {
+			return nil, fmt.Errorf("%q %w", codeText, errListedTwice)
+		}
+
+		percents[code] = percent
+	}
+
+	return percents, nil
+}
+
+// parsePercent reads a percentage, a whole number from 0 to 100.
+func parsePercent(value string) (int64, error) {
+	percent, err := strconv.ParseInt(value, 10, 64)
+	if err != nil || percent < 0 || percent > 100 {
+		return 0, fmt.Errorf("%q %w", value, errNotPercent)
+	}
+
+	return percent, nil
+}
+
 // headerNameChars are the characters RFC 9110 allows in a header name:
 // letters, digits and these marks.
 const headerNameChars = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" +

internal/config/config_test.go

@@ -50,6 +50,11 @@ const (
 	addLookupHeaders        = "SWWAF_ADD_LOOKUP_HEADERS"
 	deniedCountries         = "SWWAF_DENIED_COUNTRIES"
 	allowedCountries        = "SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES"
+	asnLimitPercent         = "SWWAF_ASN_LIMIT_PERCENT"
+	countryLimitPercent     = "SWWAF_COUNTRY_LIMIT_PERCENT"
+	asnBytesPercent         = "SWWAF_ASN_BYTES_PERCENT"
+	countryBytesPercent     = "SWWAF_COUNTRY_BYTES_PERCENT"
+	unknownLimitPercent     = "SWWAF_UNKNOWN_LIMIT_PERCENT"
 	banResponse             = "SWWAF_BAN_RESPONSE"
 	limitBanDuration        = "SWWAF_LIMIT_BAN_DURATION"
 	limitBanRepeatWindow    = "SWWAF_LIMIT_BAN_REPEAT_WINDOW"
@@ -892,9 +897,14 @@ func TestSettingNeedingLookupsStopsTheStartWhileTheyAreOff(t *testing.T) {
 	t.Parallel()
 
 	for name, value := range map[string]string{
-		deniedCountries:  "kp",
+		deniedCountries:     "kp",
-		allowedCountries: "de",
+		allowedCountries:    "de",
-		addLookupHeaders: enabled,
+		addLookupHeaders:    enabled,
+		asnLimitPercent:     "AS64496:50",
+		countryLimitPercent: "cn:25",
+		asnBytesPercent:     "AS64496:50",
+		countryBytesPercent: "cn:25",
+		unknownLimitPercent: "99",
 	} {
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
@@ -909,12 +919,94 @@ func TestSettingNeedingLookupsStopsTheStartWhileTheyAreOff(t *testing.T) {
 		})
 	}
 
-	// Set empty, the country lists need nothing looked up.
+	// Set empty, the lists need nothing looked up, and nor does
+	// SWWAF_UNKNOWN_LIMIT_PERCENT at 100, which lowers no limit.
 	fromEnvironment(t, environment{
 		lookupSource: off, deniedCountries: "", allowedCountries: "",
+		asnLimitPercent: "", countryLimitPercent: "", asnBytesPercent: "",
+		countryBytesPercent: "", unknownLimitPercent: "100",
 	})
 }
 
+func TestBiasedThresholdsAsSet(t *testing.T) {
+	t.Parallel()
+
+	cfg := fromEnvironment(t, environment{})
+	if len(cfg.ASNLimitPercent) != 0 || len(cfg.CountryLimitPercent) != 0 ||
+		len(cfg.ASNBytesPercent) != 0 || len(cfg.CountryBytesPercent) != 0 ||
+		cfg.UnknownLimitPercent != 100 {
+		t.Errorf("biased thresholds %v, %v, %v, %v and %d by default, "+
+			"want four empty lists and 100", cfg.ASNLimitPercent, cfg.CountryLimitPercent,
+			cfg.ASNBytesPercent, cfg.CountryBytesPercent, cfg.UnknownLimitPercent)
+	}
+
+	// AS numbers and countries in either case, an AS number with leading
+	// zeros, 0 and 100.
+	cfg = fromEnvironment(t, environment{
+		asnLimitPercent:     "AS14061:50, as16276:0,AS045102:100",
+		countryLimitPercent: "cn:25,RU:50",
+		asnBytesPercent:     "as16276:75",
+		countryBytesPercent: "ru:10",
+		unknownLimitPercent: "0",
+	})
+
+	for name, tc := range map[string]struct{ got, want map[string]int64 }{
+		asnLimitPercent: {
+			cfg.ASNLimitPercent,
+			map[string]int64{"AS14061": 50, "AS16276": 0, "AS45102": 100},
+		},
+		countryLimitPercent: {cfg.CountryLimitPercent, map[string]int64{"CN": 25, "RU": 50}},
+		asnBytesPercent:     {cfg.ASNBytesPercent, map[string]int64{"AS16276": 75}},
+		countryBytesPercent: {cfg.CountryBytesPercent, map[string]int64{"RU": 10}},
+	} {
+		if !maps.Equal(tc.got, tc.want) {
+			t.Errorf("%s gave %v, want %v", name, tc.got, tc.want)
+		}
+	}
+
+	if cfg.UnknownLimitPercent != 0 {
+		t.Errorf("%s gave %d, want 0", unknownLimitPercent, cfg.UnknownLimitPercent)
+	}
+}
+
+func TestInvalidBiasedThresholdStopsTheStartSayingWhatIsWrong(t *testing.T) {
+	t.Parallel()
+
+	const (
+		notASN     = " is not an AS number such as AS64496"
+		notItem    = " is not a code, : and a percentage, such as AS64496:50 or cn:25"
+		notPercent = " is not a percentage, a whole number from 0 to 100"
+	)
+
+	for _, tc := range []struct{ name, value, want string }{
+		{asnLimitPercent, "14061:50", `"14061"` + notASN},
+		{asnLimitPercent, "AS4294967296:50", `"AS4294967296"` + notASN},
+		{asnLimitPercent, "AS14061", `"AS14061"` + notItem},
+		{asnLimitPercent, "AS14061:101", `"101"` + notPercent},
+		{asnLimitPercent, "AS14061:50,as14061:25", `"as14061" is listed twice`},
+		{
+			countryLimitPercent, "nk:25",
+			`"nk" is not a two-letter country code such as de or kp`,
+		},
+		{countryLimitPercent, "cn:25,CN:50", `"CN" is listed twice`},
+		{asnBytesPercent, "AS14061:-1", `"-1"` + notPercent},
+		{countryBytesPercent, "cn:50%", `"50%"` + notPercent},
+		{unknownLimitPercent, "101", `"101"` + notPercent},
+		{unknownLimitPercent, off, `"off"` + notPercent},
+	} {
+		t.Run(tc.name+"="+tc.value, func(t *testing.T) {
+			t.Parallel()
+
+			_, err := config.FromEnvironment(environment{tc.name: tc.value}.lookupEnv)
+
+			want := tc.name + ": " + tc.want
+			if err == nil || err.Error() != want {
+				t.Errorf("error %v, want %s", err, want)
+			}
+		})
+	}
+}
+
 func TestSizesAndOff(t *testing.T) {
 	t.Parallel()
 
@@ -1054,6 +1146,14 @@ func TestInvalidValueStopsTheStart(t *testing.T) {
 		{allowedCountries, "uk"},
 		{allowedCountries, "zz"},
 		{allowedCountries, "de,germany"},
+		{asnLimitPercent, "AS14061:50,,AS16276:50"}, {asnLimitPercent, "ASX:50"},
+		{asnLimitPercent, "AS14061:"}, {asnLimitPercent, "AS14061 :50"},
+		{asnLimitPercent, "AS14061:1.5"}, {asnLimitPercent, "AS-1:50"},
+		{countryLimitPercent, "cn"}, {countryLimitPercent, "cn:"},
+		{countryLimitPercent, "cn:25:50"}, {countryLimitPercent, "china:25"},
+		{asnBytesPercent, "AS14061:101"}, {countryBytesPercent, "su:50"},
+		{unknownLimitPercent, ""}, {unknownLimitPercent, "-1"},
+		{unknownLimitPercent, "50%"},
 		{metricsTopN, off}, {metricsTopN, "0"}, {metricsTopN, "-1"},
 		{logRequestHeaders, "accept,,origin"}, {logRequestHeaders, "accept;origin"},
 		{logRequestHeaders, "accept language"}, {logRequestHeaders, "x-foo:"},
@@ -1325,6 +1425,11 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
 		addLookupHeaders:        "false",
 		deniedCountries:         "",
 		allowedCountries:        "",
+		asnLimitPercent:         "",
+		countryLimitPercent:     "",
+		asnBytesPercent:         "",
+		countryBytesPercent:     "",
+		unknownLimitPercent:     "100",
 		banResponse:             "403",
 		limitBanDuration:        "1h",
 		limitBanRepeatWindow:    "24h",

internal/proxy/bans.go

@@ -42,9 +42,11 @@ func (rq *request) banned(now time.Time) bool {
 
 // limitBroken counts the request for the rate limits at now, notes the
 // client's counts for the log line, and reports whether the request takes
-// the client over a rate limit, which breaks it.
+// the client over a rate limit, as its limit percentage lowers it, which
+// breaks it.
 func (rq *request) limitBroken(now time.Time) bool {
-	counts, hit, over := rq.h.limiter.Count(clientGroup(rq.client), now)
+	counts, hit, over := rq.h.limiter.Count(clientGroup(rq.client), now,
+		rq.limitPercent.percent)
 	rq.line.Counts = counts
 
 	if over {
@@ -63,8 +65,9 @@ func (rq *request) limitBroken(now time.Time) bool {
 // what it carried from the client with the request's. Only a request
 // passed to the app has them counted, and only one the rate limits
 // counted; in observe mode, not one that enforce mode would have refused.
-// Bytes that take the client over a byte limit break it; the response was
+// Bytes that take the client over a byte limit, as its limit percentage
-// passed on whole.
+// for the byte limits lowers it, break it; the response was passed on
+// whole.
 func (rq *request) countBytes() {
 	if !rq.counted || rq.line.WouldAction != "" {
 		return
@@ -89,7 +92,8 @@ func (rq *request) countBytes() {
 
 	now := rq.h.now()
 
-	counts, hit, over := rq.h.limiter.CountBytes(clientGroup(rq.client), now, bytes)
+	counts, hit, over := rq.h.limiter.CountBytes(clientGroup(rq.client), now, bytes,
+		rq.bytesPercent.percent)
 	rq.line.Counts.MinuteBytes = counts.MinuteBytes
 	rq.line.Counts.HourBytes = counts.HourBytes
 	rq.line.Counts.DayBytes = counts.DayBytes
@@ -103,9 +107,10 @@ func (rq *request) countBytes() {
 // one hit names, and notes the offence for the log line. status is what
 // the client was sent, or is sent: SWWAF_BAN_RESPONSE for a request over
 // a rate limit, the app's answer for one whose bytes broke a byte limit.
-// The ban sets the client's counters back to zero. In observe mode it
+// The ban's notes give the client's limit percentage for that kind of
-// makes no ban and sets nothing back, and raises the alert for the ban it
+// limit. The ban sets the client's counters back to zero. In observe mode
-// would have made, if that alert would be sent.
+// it makes no ban and sets nothing back, and raises the alert for the ban
+// it would have made, if that alert would be sent.
 func (rq *request) banForLimit(now time.Time, hit ratelimit.Hit, status int) {
 	rq.line.LimitHit = hit.Window
 	if hit.Kind == ratelimit.KindBytes {
@@ -131,6 +136,13 @@ func (rq *request) banForLimit(now time.Time, hit ratelimit.Hit, status int) {
 		Requests: rq.netblockRequests(netblock),
 	}
 
+	percent := rq.limitPercent
+	if hit.Kind == ratelimit.KindBytes {
+		percent = rq.bytesPercent
+	}
+
+	notes.LimitPercent, notes.LimitPercentSetting = percent.logged()
+
 	if rq.h.config.Observe {
 		ban, wouldBan := rq.h.ledger.WouldBanForLimit(netblock, now, notes)
 		if wouldBan {

internal/proxy/biased.go

@@ -0,0 +1,96 @@
+package proxy
+
+import (
+	"sneak.berlin/go/smallwebwaf/internal/config"
+)
+
+// whole is the percentage of each limit a client gets when no biased
+// threshold lowers its limits.
+const whole = 100
+
+// percentage is a client's limit percentage for the rate limits or for
+// the byte limits, as the biased thresholds give it, and the setting that
+// gave it: "" with whole when none lowers that kind of limit.
+type percentage struct {
+	percent int64
+	setting string
+}
+
+// biasedThresholdsSet reports whether a biased threshold can lower a
+// client's limits: one of its lists is not empty, or
+// SWWAF_UNKNOWN_LIMIT_PERCENT is below 100. The client's lookup is then
+// needed before its request goes on.
+func biasedThresholdsSet(cfg *config.Config) bool {
+	return len(cfg.ASNLimitPercent) > 0 || len(cfg.CountryLimitPercent) > 0 ||
+		len(cfg.ASNBytesPercent) > 0 || len(cfg.CountryBytesPercent) > 0 ||
+		cfg.UnknownLimitPercent < whole
+}
+
+// limitPercentages returns a client's limit percentages, for the rate
+// limits and for the byte limits, by its AS number and country as looked
+// up, each "" when unknown. Each is the lowest of those the settings give
+// it, the first of them in the order below when several are lowest: the
+// percentage SWWAF_ASN_LIMIT_PERCENT gives its AS number, the one
+// SWWAF_COUNTRY_LIMIT_PERCENT gives its country, and, for a client
+// without a country, SWWAF_UNKNOWN_LIMIT_PERCENT. For the byte limits,
+// SWWAF_ASN_BYTES_PERCENT and SWWAF_COUNTRY_BYTES_PERCENT take the place
+// of the first two for an AS number or a country they list.
+func limitPercentages(
+	cfg *config.Config, asn, country string,
+) (percentage, percentage) {
+	unknown := percentage{percent: whole}
+	if country == "" {
+		unknown = percentage{cfg.UnknownLimitPercent, "SWWAF_UNKNOWN_LIMIT_PERCENT"}
+	}
+
+	asnRequests := given(cfg.ASNLimitPercent, asn, "SWWAF_ASN_LIMIT_PERCENT")
+	countryRequests := given(cfg.CountryLimitPercent, country,
+		"SWWAF_COUNTRY_LIMIT_PERCENT")
+
+	asnBytes, countryBytes := asnRequests, countryRequests
+	if _, listed := cfg.ASNBytesPercent[asn]; listed {
+		asnBytes = given(cfg.ASNBytesPercent, asn, "SWWAF_ASN_BYTES_PERCENT")
+	}
+
+	if _, listed := cfg.CountryBytesPercent[country]; listed {
+		countryBytes = given(cfg.CountryBytesPercent, country, "SWWAF_COUNTRY_BYTES_PERCENT")
+	}
+
+	return lowest(asnRequests, countryRequests, unknown),
+		lowest(asnBytes, countryBytes, unknown)
+}
+
+// given returns the percentage percents, the setting named setting, gives
+// code, an AS number or a country, or whole when it does not list code.
+func given(percents map[string]int64, code, setting string) percentage {
+	percent, listed := percents[code]
+	if !listed {
+		return percentage{percent: whole}
+	}
+
+	return percentage{percent, setting}
+}
+
+// lowest returns the lowest of percentages below whole, the first of them
+// when several are lowest, or whole when none is below it.
+func lowest(percentages ...percentage) percentage {
+	low := percentage{percent: whole}
+
+	for _, p := range percentages {
+		if p.percent < low.percent {
+			low = p
+		}
+	}
+
+	return low
+}
+
+// logged returns p as the log line and the notes of a ban give it: its
+// percent and setting, or nil and "" for whole, which they leave out.
+func (p percentage) logged() (*int64, string) {
+	if p.percent == whole {
+		return nil, ""
+	}
+
+	return &p.percent, p.setting
+}

internal/proxy/biased_test.go

@@ -0,0 +1,494 @@
+package proxy_test
+
+import (
+	"fmt"
+	"io"
+	"maps"
+	"net"
+	"net/http"
+	"net/http/httptest"
+	"net/netip"
+	"path/filepath"
+	"strings"
+	"testing"
+	"testing/synctest"
+	"time"
+
+	"sneak.berlin/go/smallwebwaf/internal/alerts"
+	"sneak.berlin/go/smallwebwaf/internal/bans"
+	"sneak.berlin/go/smallwebwaf/internal/lookup/lookuptest"
+	"sneak.berlin/go/smallwebwaf/internal/proxy"
+	"sneak.berlin/go/smallwebwaf/internal/requestlog"
+)
+
+// The biased thresholds.
+const (
+	asnLimitPercent     = "SWWAF_ASN_LIMIT_PERCENT"
+	countryLimitPercent = "SWWAF_COUNTRY_LIMIT_PERCENT"
+	asnBytesPercent     = "SWWAF_ASN_BYTES_PERCENT"
+	countryBytesPercent = "SWWAF_COUNTRY_BYTES_PERCENT"
+	unknownLimitPercent = "SWWAF_UNKNOWN_LIMIT_PERCENT"
+)
+
+const (
+	// asnDEHalf and countryDEHalf give fromDE's AS number and its country
+	// half of every limit, and asnDEQuarter gives its AS number a quarter.
+	asnDEHalf     = asnDE + ":50"
+	asnDEQuarter  = asnDE + ":25"
+	countryDEHalf = "de:50"
+	// noCountry is in an AS of its own, AS64500, and in no country.
+	noCountry = "192.0.2.80"
+	// fourAMinute is the rate limit these tests set: half of it is 2
+	// requests a minute, a quarter of it 1.
+	fourAMinute = "4"
+	// twoUploads is the byte limit these tests set: 199 bytes, which an
+	// upload, a request with a body and its answer, 100 bytes, is within,
+	// and half of which, 99 bytes, it is over.
+	twoUploads = "199"
+	// none is how percentText gives a percentage left out.
+	none = "none"
+)
+
+func TestEachBiasedThresholdLowersTheRateLimits(t *testing.T) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		setting, value, from string
+	}{
+		{asnLimitPercent, asnDEHalf, fromDE},
+		{countryLimitPercent, countryDEHalf, fromDE},
+		{unknownLimitPercent, "50", unplaced},
+	} {
+		t.Run(tc.setting, func(t *testing.T) {
+			t.Parallel()
+
+			s, _, _ := startWithLookups(t, map[string]string{
+				rateLimitPerMinute: fourAMinute, tc.setting: tc.value,
+			})
+
+			// Half of 4 requests a minute: the third breaks the limit.
+			for _, sent := range []struct {
+				status int
+				action string
+			}{
+				{http.StatusOK, requestlog.ActionForward},
+				{http.StatusOK, requestlog.ActionForward},
+				{http.StatusForbidden, requestlog.ActionRateLimited},
+			} {
+				line := s.get(tc.from, sent.status, sent.action)
+				wantPercent(t, "limit_percent", line.LimitPercent, line.LimitPercentSetting,
+					"50 from "+tc.setting)
+			}
+
+			// fromKP, which no setting lists, has the whole limit.
+			for range 3 {
+				line := s.get(fromKP, http.StatusOK, requestlog.ActionForward)
+				wantPercent(t, "limit_percent", line.LimitPercent, line.LimitPercentSetting,
+					none)
+			}
+		})
+	}
+}
+
+func TestEachBiasedThresholdLowersTheByteLimits(t *testing.T) {
+	t.Parallel()
+
+	// The AS numbers and countries are given in either case.
+	for _, tc := range []struct {
+		setting, value, from string
+	}{
+		{asnLimitPercent, asnDEHalf, fromDE},
+		{countryLimitPercent, "DE:50", fromDE},
+		{unknownLimitPercent, "50", unplaced},
+		{asnBytesPercent, "as64496:50", fromDE},
+		{countryBytesPercent, countryDEHalf, fromDE},
+	} {
+		t.Run(tc.setting, func(t *testing.T) {
+			t.Parallel()
+
+			s, _, _ := startWithLookups(t, map[string]string{
+				bytesLimitPerMinute: twoUploads, tc.setting: tc.value,
+			})
+
+			// The upload's 100 bytes are over half of 199, 99.
+			line := s.uploadFrom(tc.from)
+			if line.LimitHit != minuteBytes {
+				t.Errorf("log line has limit_hit %q, want %s", line.LimitHit, minuteBytes)
+			}
+
+			wantPercent(t, "bytes_percent", line.BytesPercent, line.BytesPercentSetting,
+				"50 from "+tc.setting)
+
+			// fromKP, which no setting lists, has the whole limit.
+			line = s.uploadFrom(fromKP)
+			if line.LimitHit != "" {
+				t.Errorf("log line for %s has limit_hit %q, want none", fromKP, line.LimitHit)
+			}
+
+			wantPercent(t, "bytes_percent", line.BytesPercent, line.BytesPercentSetting, none)
+		})
+	}
+}
+
+func TestBytesPercentSettingsTakeThePlaceOfTheOthersForByteLimits(t *testing.T) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		name string
+		env  map[string]string
+		// limitPercent and bytesPercent are the log line's, as percentText
+		// gives them, and limitHit is its limit_hit.
+		limitPercent, bytesPercent, limitHit string
+	}{
+		{
+			"lowering the byte limits alone",
+			map[string]string{asnBytesPercent: asnDEHalf},
+			none, "50 from " + asnBytesPercent, minuteBytes,
+		},
+		{
+			"lowering the byte limits alone, by country",
+			map[string]string{countryBytesPercent: countryDEHalf},
+			none, "50 from " + countryBytesPercent, minuteBytes,
+		},
+		{
+			"raising the byte limits back",
+			map[string]string{asnLimitPercent: asnDEHalf, asnBytesPercent: asnDE + ":100"},
+			"50 from " + asnLimitPercent, none, "",
+		},
+		{
+			"raising the byte limits back, by country",
+			map[string]string{countryLimitPercent: countryDEHalf, countryBytesPercent: "de:100"},
+			"50 from " + countryLimitPercent, none, "",
+		},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			t.Parallel()
+
+			env := map[string]string{bytesLimitPerMinute: twoUploads}
+			maps.Copy(env, tc.env)
+			s, _, _ := startWithLookups(t, env)
+
+			// The upload's 100 bytes are over 99, half of 199, and within 199.
+			line := s.uploadFrom(fromDE)
+			if line.LimitHit != tc.limitHit {
+				t.Errorf("log line has limit_hit %q, want %q", line.LimitHit, tc.limitHit)
+			}
+
+			wantPercent(t, "limit_percent", line.LimitPercent, line.LimitPercentSetting,
+				tc.limitPercent)
+			wantPercent(t, "bytes_percent", line.BytesPercent, line.BytesPercentSetting,
+				tc.bytesPercent)
+		})
+	}
+}
+
+func TestZeroPercentIsAZeroAllowance(t *testing.T) {
+	t.Parallel()
+
+	s, _, _ := startWithLookups(t, map[string]string{asnLimitPercent: asnDE + ":0"})
+
+	// The first request breaks the limit, and bans the client; the log line
+	// gives the 0.
+	line := s.get(fromDE, http.StatusForbidden, requestlog.ActionRateLimited)
+	if line.fields["limit_percent"] != float64(0) ||
+		line.fields["limit_percent_setting"] != asnLimitPercent {
+		t.Errorf("log line has limit_percent %v from %v, want 0 from %s",
+			line.fields["limit_percent"], line.fields["limit_percent_setting"],
+			asnLimitPercent)
+	}
+
+	s.get(fromDE, http.StatusForbidden, requestlog.ActionBanned)
+}
+
+func TestLowestPercentageApplies(t *testing.T) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		name string
+		env  map[string]string
+		from string
+		// want is the log line's limit_percent, as percentText gives it.
+		want string
+	}{
+		{
+			"the country's",
+			map[string]string{asnLimitPercent: asnDEHalf, countryLimitPercent: "de:25"},
+			fromDE, "25 from " + countryLimitPercent,
+		},
+		{
+			"the AS number's",
+			map[string]string{asnLimitPercent: asnDEQuarter, countryLimitPercent: countryDEHalf},
+			fromDE, "25 from " + asnLimitPercent,
+		},
+		{
+			"the AS number's, the first of two alike",
+			map[string]string{asnLimitPercent: asnDEQuarter, countryLimitPercent: "de:25"},
+			fromDE, "25 from " + asnLimitPercent,
+		},
+		{
+			"that for a client without a country",
+			map[string]string{asnLimitPercent: "AS64500:50", unknownLimitPercent: "25"},
+			noCountry, "25 from " + unknownLimitPercent,
+		},
+		{
+			// SWWAF_UNKNOWN_LIMIT_PERCENT is left at its default, 100.
+			"the AS number's, for a client without a country",
+			map[string]string{asnLimitPercent: "AS64500:25"},
+			noCountry, "25 from " + asnLimitPercent,
+		},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			t.Parallel()
+
+			env := map[string]string{rateLimitPerMinute: fourAMinute}
+			maps.Copy(env, tc.env)
+			s, _, _ := startWithLookups(t, env)
+
+			// A quarter of 4 requests a minute: the second breaks the limit.
+			s.get(tc.from, http.StatusOK, requestlog.ActionForward)
+
+			line := s.get(tc.from, http.StatusForbidden, requestlog.ActionRateLimited)
+			wantPercent(t, "limit_percent", line.LimitPercent, line.LimitPercentSetting,
+				tc.want)
+		})
+	}
+}
+
+func TestUnknownLimitPercentGivesEveryClientWithoutACountryItsPercentage(t *testing.T) {
+	t.Parallel()
+
+	s, _, _ := startWithLookups(t, map[string]string{
+		rateLimitPerMinute: fourAMinute, unknownLimitPercent: "50",
+	})
+
+	// One the lookup database does not hold, and one on a private address,
+	// which is never looked up: the third request of each breaks half of 4.
+	for _, from := range []string{unplaced, "10.0.0.8"} {
+		s.get(from, http.StatusOK, requestlog.ActionForward)
+		s.get(from, http.StatusOK, requestlog.ActionForward)
+		s.get(from, http.StatusForbidden, requestlog.ActionRateLimited)
+	}
+
+	// One in a country has the whole limit.
+	for range 3 {
+		s.get(fromDE, http.StatusOK, requestlog.ActionForward)
+	}
+}
+
+func TestClientWithoutAnAnswerInTimeHasTheUnknownLimitPercent(t *testing.T) {
+	t.Parallel()
+
+	// In a synctest bubble, as TestRequestWaitsAsLongAsTheLookupTimeoutSays
+	// says, with a GeoJS that never answers.
+	synctest.Test(t, func(t *testing.T) {
+		server, out, _ := newProxy(t, "http://app.invalid", unansweredGeoJSURL,
+			time.Now, map[string]string{unknownLimitPercent: "0"})
+
+		// Once the second the request waits for its answer is up, the client
+		// counts as without a country, and its zero allowance refuses the
+		// request before it reaches the app.
+		serveFromDE(t, server, http.MethodGet, http.NoBody)
+
+		line := out.requestLine(t)
+		wantLine(t, line, http.StatusForbidden, requestlog.ActionRateLimited)
+		wantPercent(t, "limit_percent", line.LimitPercent, line.LimitPercentSetting,
+			"0 from "+unknownLimitPercent)
+	})
+}
+
+func TestRequestWaitsForItsLookupWhileABiasedThresholdIsSet(t *testing.T) {
+	t.Parallel()
+
+	const timeout = 3 * time.Second
+
+	for _, tc := range []struct {
+		setting, value string
+		waits          bool
+	}{
+		{asnLimitPercent, asnDEHalf, true},
+		{countryLimitPercent, countryDEHalf, true},
+		{asnBytesPercent, asnDEHalf, true},
+		{countryBytesPercent, countryDEHalf, true},
+		{unknownLimitPercent, "99", true},
+		// At 100, its default, it lowers no limit.
+		{unknownLimitPercent, "100", false},
+	} {
+		t.Run(tc.setting+"="+tc.value, func(t *testing.T) {
+			t.Parallel()
+
+			// In a synctest bubble, as TestRequestWaitsAsLongAsTheLookupTimeoutSays
+			// says, with a GeoJS that never answers.
+			synctest.Test(t, func(t *testing.T) {
+				// The request's body is over SWWAF_REQUEST_MAX_BYTES, so that it
+				// is refused after the checks, and never reaches the app.
+				server, out, _ := newProxy(t, "http://app.invalid", unansweredGeoJSURL,
+					time.Now, map[string]string{
+						lookupTimeout: timeout.String(), requestMaxBytes: "1",
+						tc.setting: tc.value,
+					})
+				began := time.Now()
+
+				serveFromDE(t, server, http.MethodPost, strings.NewReader("ab"))
+
+				want := time.Duration(0)
+				if tc.waits {
+					want = timeout
+				}
+
+				if waited := time.Since(began); waited != want {
+					t.Errorf("the request waited %s for its answer, want %s", waited, want)
+				}
+
+				wantLine(t, out.requestLine(t), http.StatusRequestEntityTooLarge,
+					requestlog.ActionTooLarge)
+
+				// The bubble's clock stops once this function returns, so the
+				// request to GeoJS, which a request that did not wait leaves
+				// under way, has to be abandoned before then.
+				time.Sleep(timeout)
+			})
+		})
+	}
+}
+
+func TestBanForALoweredLimitGivesThePercentageInItsNotesAndItsAlert(t *testing.T) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		name string
+		env  map[string]string
+		// before is how many uploads come before the one that breaks a
+		// limit, which is answered with status and logged with action.
+		before int
+		status int
+		action string
+		// reason and want are the ban's reason, and its notes' limit
+		// percentage, as percentText gives it.
+		reason, want string
+	}{
+		{
+			// A quarter of 12 requests a minute is 3: the fourth breaks it.
+			"a rate limit",
+			map[string]string{rateLimitPerMinute: "12", asnLimitPercent: asnDEQuarter},
+			3, http.StatusForbidden, requestlog.ActionRateLimited,
+			"requests per minute over the limit of 3", "25 from " + asnLimitPercent,
+		},
+		{
+			// The byte limits' percentage, not the rate limits'.
+			"a byte limit",
+			map[string]string{
+				bytesLimitPerMinute: twoUploads, asnLimitPercent: asnDEQuarter,
+				asnBytesPercent: asnDEHalf,
+			},
+			0, http.StatusOK, requestlog.ActionForward,
+			"bytes per minute over the limit of 99", "50 from " + asnBytesPercent,
+		},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			t.Parallel()
+
+			s, server, queue := startWithLookups(t, tc.env)
+
+			for range tc.before {
+				s.uploadFrom(fromDE)
+			}
+
+			s.requestWithBody(http.MethodPost, fromDE, "/", uploadHeader, uploadBody,
+				tc.status, tc.action)
+
+			held := server.Ledger.Bans(netip.MustParsePrefix(fromDE + "/32"))
+			if len(held) != 1 {
+				t.Fatalf("bans %+v, want one", held)
+			}
+
+			notes := held[0].Notes
+			if held[0].Reason != tc.reason {
+				t.Errorf("the ban's reason is %q, want %q", held[0].Reason, tc.reason)
+			}
+
+			wantPercent(t, "the notes' limit_percent", notes.LimitPercent,
+				notes.LimitPercentSetting, tc.want)
+
+			waiting := queue.Snapshot().Waiting[alerts.DestinationWebhook]
+			if len(waiting) != 1 {
+				t.Fatalf("%d alerts wait, want the ban's alone: %+v", len(waiting), waiting)
+			}
+
+			alerted, _ := waiting[0].Detail["notes"].(bans.Notes)
+			wantPercent(t, "the alert's notes' limit_percent", alerted.LimitPercent,
+				alerted.LimitPercentSetting, tc.want)
+		})
+	}
+}
+
+// startWithLookups is startAppWithAlerts in front of readAndAnswer, with
+// the settings in env on top of clients looked up in a lookup database,
+// which places fromDE and fromKP in the AS numbers and countries the
+// stand-in for GeoJS gives them, noCountry in AS64500 and no country, and
+// no other address. It returns the sender, the server and the queue of
+// the alerts.
+func startWithLookups(
+	t *testing.T, env map[string]string,
+) (*sender, *proxy.Server, *alerts.Queue) {
+	t.Helper()
+
+	path := filepath.Join(t.TempDir(), "ipinfo_lite.mmdb")
+	lookuptest.Write(t, path, map[string]lookuptest.Network{
+		fromDE + "/32":    {ASN: asnDE, ASName: asNameDE, Country: "DE"},
+		fromKP + "/32":    {ASN: asnKP, ASName: asNameKP, Country: "KP"},
+		noCountry + "/32": {ASN: "AS64500", ASName: "Nowhere Net"},
+	})
+
+	settings := map[string]string{lookupSource: fileSource, lookupDBPath: path}
+	maps.Copy(settings, env)
+
+	s, _, server, queue := startAppWithAlerts(t, readAndAnswer, settings)
+
+	return s, server, queue
+}
+
+// uploadFrom is upload from the client at from.
+func (s *sender) uploadFrom(from string) logLine {
+	s.t.Helper()
+
+	line, _ := s.requestWithBody(http.MethodPost, from, "/", uploadHeader, uploadBody,
+		http.StatusOK, requestlog.ActionForward)
+
+	return line
+}
+
+// serveFromDE hands a request from fromDE with method and body straight to
+// server's handler, without the network, and returns once it is answered.
+func serveFromDE(t *testing.T, server *proxy.Server, method string, body io.Reader) {
+	t.Helper()
+
+	req := httptest.NewRequestWithContext(t.Context(), method, "/", body)
+	req.RemoteAddr = net.JoinHostPort(fromDE, "1234")
+
+	server.Handler.ServeHTTP(httptest.NewRecorder(), req)
+}
+
+// wantPercent checks a limit percentage that a log line or a ban's notes
+// give, what, and the setting that gave it, against want, as percentText
+// gives them.
+func wantPercent(t *testing.T, what string, percent *int64, setting, want string) {
+	t.Helper()
+
+	if got := percentText(percent, setting); got != want {
+		t.Errorf("%s is %s, want %s", what, got, want)
+	}
+}
+
+// percentText gives a limit percentage and the setting that gave it as
+// text, such as "50 from SWWAF_ASN_LIMIT_PERCENT", or none when both are
+// left out.
+func percentText(percent *int64, setting string) string {
+	switch {
+	case percent == nil && setting == "":
+		return none
+	case percent == nil:
+		return "none from " + setting
+	default:
+		return fmt.Sprintf("%d from %s", *percent, setting)
+	}
+}

internal/proxy/lookup.go

@@ -22,8 +22,9 @@ const (
 // database or through GeoJS, and notes them for the log line, unless
 // SWWAF_LOOKUP_SOURCE is off or the client is on a private, loopback or
 // link-local address, which no lookup can place. The lookup database
-// answers at once. With GeoJS, while a setting needs the answer, a new
+// answers at once. With GeoJS, while a setting needs the answer, such as a
-// client's request waits for it. ctx is the request's own context.
+// country list or a biased threshold, a new client's request waits for it.
+// ctx is the request's own context.
 func (rq *request) lookUp(ctx context.Context) {
 	if rq.h.config.LookupSource == "off" || !canBePlaced(rq.client) {
 		return

internal/proxy/lookup_test.go

@@ -22,6 +22,10 @@ import (
 // and country.
 type asnAndCountry struct{ asn, asName, country string }
 
+// fileSource is the SWWAF_LOOKUP_SOURCE that looks clients up in the
+// lookup database.
+const fileSource = "file"
+
 func TestEveryClientIsLookedUpWithoutWaitingWhileNoSettingNeedsIt(t *testing.T) {
 	t.Parallel()
 
@@ -178,7 +182,7 @@ func TestClientsAreLookedUpInTheLookupDatabaseAndGeoJSIsNotAsked(t *testing.T) {
 		fromKP + "/32": {ASN: asnKP, ASName: asNameKP, Country: "KP"},
 	})
 	s, clk, server := startWithClock(t, geojsURL, map[string]string{
-		lookupSource:       "file",
+		lookupSource:       fileSource,
 		lookupDBPath:       path,
 		allowedCountries:   "DE",
 		rateLimitPerMinute: "1",

internal/proxy/proxy.go

@@ -124,11 +124,11 @@ func New(params Params) *Server {
 	h.geojs = lookup.New(lookup.Params{
 		URL:     params.GeoJSURL,
 		Timeout: params.Config.LookupTimeout,
-		// The country lists and the headers act on the answer before the
+		// The country lists, the headers and the biased thresholds act on
-		// request goes on.
+		// the answer before the request goes on.
 		Wait: len(params.Config.DeniedCountries) > 0 ||
 			len(params.Config.ExclusivelyAllowedCountries) > 0 ||
-			params.Config.AddLookupHeaders,
+			params.Config.AddLookupHeaders || biasedThresholdsSet(params.Config),
 		Answered:   h.addLookup,
 		Now:        params.Now,
 		ProcessLog: params.ProcessLog,

internal/proxy/proxy_test.go

@@ -315,7 +315,7 @@ func newProxy(
 
 	var lookupFile *lookup.File
 
-	if cfg.LookupSource == "file" {
+	if cfg.LookupSource == fileSource {
 		lookupFile, err = lookup.OpenFile(lookup.FileParams{
 			Path: cfg.LookupDBPath, Now: now, ProcessLog: processLog, Alerts: alertQueue,
 		})

internal/proxy/request.go

@@ -56,9 +56,12 @@ type request struct {
 	lookedUp     bool
 	lookupAnswer lookup.Answer
 	// counted is true for a request the rate limits counted, whose bytes
-	// the byte limits count once it has ended.
+	// the byte limits count once it has ended. limitPercent and
-	counted bool
+	// bytesPercent are then its client's limit percentages for the rate
-	start   time.Time
+	// limits and for the byte limits.
+	counted                    bool
+	limitPercent, bytesPercent percentage
+	start                      time.Time
 	// checked is when the checks were done, and upstreamStart when the
 	// request was handed to the app.
 	checked       time.Time
@@ -212,9 +215,10 @@ func (rq *request) check(ctx context.Context) *refusal {
 // them refuses is not counted for the rate limits. Then come the rate
 // limits, unless the client is in SWWAF_RATE_LIMIT_EXEMPT_NETS or the
 // request's path is exempt under SWWAF_RATE_LIMIT_EXEMPT_PATHS, so that
-// every other request is counted, and last the rule files. A request
+// every other request is counted, each of them by the client's limit
-// exempt from the rate limits is exempt from the byte limits too. ctx is
+// percentages, and last the rule files. A request exempt from the rate
-// the request's own context.
+// limits is exempt from the byte limits too. ctx is the request's own
+// context.
 func (rq *request) checkClient(ctx context.Context) string {
 	cfg := rq.h.config
 	if isInside(rq.client, cfg.AllowNets) {
@@ -239,6 +243,12 @@ func (rq *request) checkClient(ctx context.Context) string {
 
 	rq.counted = !isInside(rq.client, cfg.RateLimitExemptNets) &&
 		!pathExempt(rq.in.URL, cfg.RateLimitExemptPaths)
+	if rq.counted {
+		rq.limitPercent, rq.bytesPercent = limitPercentages(cfg, rq.line.ASN, rq.line.Country)
+		rq.line.LimitPercent, rq.line.LimitPercentSetting = rq.limitPercent.logged()
+		rq.line.BytesPercent, rq.line.BytesPercentSetting = rq.bytesPercent.logged()
+	}
+
 	if rq.counted && rq.limitBroken(now) {
 		return requestlog.ActionRateLimited
 	}

internal/ratelimit/ratelimit.go

@@ -174,7 +174,7 @@ type Hit struct {
 	Kind string
 	// Window is "minute", "hour" or "day".
 	Window string
-	// Limit is the window's limit.
+	// Limit is the window's limit, as the client's percentage of it.
 	Limit int64
 	// Count is the client's requests, or bytes, counted in the window,
 	// this request's included.
@@ -196,21 +196,24 @@ type Counts struct {
 
 // Count counts a request from client at now, in every window, whether or
 // not it is refused, and returns the client's counts in each window. It
-// reports whether the request takes the client over a rate limit, and the
+// reports whether the request takes the client over a rate limit, of
-// hit: the window whose limit it goes over, the shortest if it is over
+// which the client gets the percentage percent, rounded down, and the hit:
-// several.
+// the window whose limit it goes over, the shortest if it is over
-func (l *Limiter) Count(client netip.Prefix, now time.Time) (Counts, Hit, bool) {
+// several. A limit that is off stays off.
-	return l.count(client, now, 1, 0)
+func (l *Limiter) Count(
+	client netip.Prefix, now time.Time, percent int64,
+) (Counts, Hit, bool) {
+	return l.count(client, now, 1, 0, percent)
 }
 
 // CountBytes counts bytes, those of a request from client that has ended,
 // at now, in every window, and returns the client's counts in each window.
-// It reports whether the bytes take the client over a byte limit, and the
+// It reports whether the bytes take the client over a byte limit, of which
-// hit, as Count does.
+// the client gets the percentage percent, and the hit, as Count does.
 func (l *Limiter) CountBytes(
-	client netip.Prefix, now time.Time, bytes int64,
+	client netip.Prefix, now time.Time, bytes, percent int64,
 ) (Counts, Hit, bool) {
-	return l.count(client, now, 0, bytes)
+	return l.count(client, now, 0, bytes, percent)
 }
 
 // Reset sets client's counts of requests and of bytes in every window
@@ -373,9 +376,10 @@ func (l *Limiter) Load(clients []Client, now time.Time) {
 // count adds requests and bytes from client at now to its buckets in
 // every window, and returns its counts. A limit is broken only by what is
 // added to it, so that a request whose bytes are counted after another of
-// the client's requests broke a rate limit does not break it too.
+// the client's requests broke a rate limit does not break it too. The
+// client gets the percentage percent of each limit.
 func (l *Limiter) count(
-	client netip.Prefix, now time.Time, requests, bytes int64,
+	client netip.Prefix, now time.Time, requests, bytes, percent int64,
 ) (Counts, Hit, bool) {
 	l.mu.Lock()
 	defer l.mu.Unlock()
@@ -391,16 +395,17 @@ func (l *Limiter) count(
 	for i, w := range l.windows {
 		requestCounts[i] = requestBuckets[i].add(now, w.length, requests)
 		byteCounts[i] = byteBuckets[i].add(now, w.length, bytes)
+		limit, byteLimit := percentOf(w.limit, percent), percentOf(w.byteLimit, percent)
 
 		switch {
 		case hit.Window != "":
-		case requests > 0 && w.limit > 0 && requestCounts[i] > float64(w.limit):
+		case requests > 0 && w.limit > 0 && requestCounts[i] > float64(limit):
 			hit = Hit{
-				Kind: KindRequests, Window: w.name, Limit: w.limit, Count: requestCounts[i],
+				Kind: KindRequests, Window: w.name, Limit: limit, Count: requestCounts[i],
 			}
-		case bytes > 0 && w.byteLimit > 0 && byteCounts[i] > float64(w.byteLimit):
+		case bytes > 0 && w.byteLimit > 0 && byteCounts[i] > float64(byteLimit):
 			hit = Hit{
-				Kind: KindBytes, Window: w.name, Limit: w.byteLimit, Count: byteCounts[i],
+				Kind: KindBytes, Window: w.name, Limit: byteLimit, Count: byteCounts[i],
 			}
 		}
 	}
@@ -446,6 +451,15 @@ type window struct {
 	byteLimit int64
 }
 
+// percentOf returns the percentage percent of limit, rounded down. It is
+// written as limit's hundreds times percent, plus the rest's share, since
+// limit*percent can overflow for a byte limit.
+func percentOf(limit, percent int64) int64 {
+	const hundred = 100
+
+	return limit/hundred*percent + limit%hundred*percent/hundred
+}
+
 // add counts n requests, or n bytes, at now in a window of length, and
 // returns the client's count in the window that ends at now: what is in
 // the bucket under way, and what is in the bucket before it weighted by

internal/ratelimit/ratelimit_test.go

@@ -1,6 +1,7 @@
 package ratelimit_test
 
 import (
+	"math"
 	"net/netip"
 	"testing"
 	"time"
@@ -11,6 +12,10 @@ import (
 // limit is the limit the tests set.
 const limit = 3
 
+// whole is the percentage of each limit a client gets when nothing lowers
+// its limits.
+const whole = 100
+
 // The windows, as Count names them.
 const (
 	minute = "minute"
@@ -62,14 +67,14 @@ func TestHitGivesTheLimitAndTheRequestsCounted(t *testing.T) {
 	start := midnight()
 
 	for range limit {
-		_, _, over := limiter.Count(client, start)
+		_, _, over := limiter.Count(client, start, whole)
 		if over {
 			t.Fatal("a request within the limit is over it")
 		}
 	}
 
 	// Over both limits; the minute's is named, with the four requests.
-	_, hit, over := limiter.Count(client, start)
+	_, hit, over := limiter.Count(client, start, whole)
 
 	want := ratelimit.Hit{
 		Kind: ratelimit.KindRequests, Window: minute, Limit: limit, Count: limit + 1,
@@ -80,6 +85,61 @@ func TestHitGivesTheLimitAndTheRequestsCounted(t *testing.T) {
 	}
 }
 
+func TestClientGetsItsPercentageOfEachLimitRoundedDown(t *testing.T) {
+	t.Parallel()
+
+	limiter := ratelimit.New(ratelimit.Limits{PerMinute: 5, BytesPerDay: math.MaxInt64})
+	client := netip.MustParsePrefix("203.0.113.9/32")
+	start := midnight()
+
+	// Half of 5 requests is 2.5, rounded down to 2: the third is over.
+	for range 2 {
+		_, _, over := limiter.Count(client, start, 50)
+		if over {
+			t.Fatal("a request within half the limit is over it")
+		}
+	}
+
+	_, hit, over := limiter.Count(client, start, 50)
+
+	want := ratelimit.Hit{Kind: ratelimit.KindRequests, Window: minute, Limit: 2, Count: 3}
+	if !over || hit != want {
+		t.Errorf("the third request gives %+v and %t, want %+v and true", hit, over, want)
+	}
+
+	// Half of the largest byte limit is still far above a TiB: working it
+	// out does not overflow.
+	_, hit, over = limiter.CountBytes(client, start, 1<<40, 50)
+	if over {
+		t.Errorf("a TiB is over half the largest byte limit: %+v", hit)
+	}
+}
+
+func TestZeroPercentIsAZeroAllowanceAndALimitOffStaysOff(t *testing.T) {
+	t.Parallel()
+
+	// Only the hour has limits: the minute's and the day's are off.
+	limiter := ratelimit.New(ratelimit.Limits{PerHour: limit, BytesPerHour: 1000})
+	client := netip.MustParsePrefix("203.0.113.9/32")
+	start := midnight()
+
+	// At 0 percent, the first request and the first byte are over the
+	// hour's limits, which are 0; the minute's, which are off, stay off.
+	_, hit, _ := limiter.Count(client, start, 0)
+
+	want := ratelimit.Hit{Kind: ratelimit.KindRequests, Window: hour, Limit: 0, Count: 1}
+	if hit != want {
+		t.Errorf("the first request gives %+v, want %+v", hit, want)
+	}
+
+	_, hit, _ = limiter.CountBytes(client, start, 1, 0)
+
+	want = ratelimit.Hit{Kind: ratelimit.KindBytes, Window: hour, Limit: 0, Count: 1}
+	if hit != want {
+		t.Errorf("the first byte gives %+v, want %+v", hit, want)
+	}
+}
+
 func TestEachByteLimitIsBrokenByTheBytesCounted(t *testing.T) {
 	t.Parallel()
 
@@ -100,12 +160,12 @@ func TestEachByteLimitIsBrokenByTheBytesCounted(t *testing.T) {
 			client := netip.MustParsePrefix("203.0.113.9/32")
 
 			// 600 bytes are within the limit, 600 more over it.
-			_, _, over := limiter.CountBytes(client, midnight(), 600)
+			_, _, over := limiter.CountBytes(client, midnight(), 600, whole)
 			if over {
 				t.Fatal("600 bytes are over the limit of 1000")
 			}
 
-			_, hit, over := limiter.CountBytes(client, midnight(), 600)
+			_, hit, over := limiter.CountBytes(client, midnight(), 600, whole)
 
 			want := ratelimit.Hit{
 				Kind: ratelimit.KindBytes, Window: tc.window, Limit: byteLimit, Count: 1200,
@@ -148,16 +208,16 @@ func TestCountGivesTheBytesInEachWindow(t *testing.T) {
 	client := netip.MustParsePrefix("203.0.113.9/32")
 	start := midnight()
 
-	limiter.CountBytes(client, start, 300)
+	limiter.CountBytes(client, start, 300, whole)
 
 	// A quarter into the next hour, the minute has only these 100 bytes.
 	// The hour still covers three quarters of the bucket before, whose 300
 	// bytes count 225, and these: 325. The day covers all 400.
 	later := start.Add(time.Hour + time.Hour/4)
-	limiter.CountBytes(client, later, 100)
+	limiter.CountBytes(client, later, 100, whole)
 
 	// A request's counts give the bytes counted so far too.
-	counts, _, _ := limiter.Count(client, later)
+	counts, _, _ := limiter.Count(client, later, whole)
 
 	want := ratelimit.Counts{
 		Minute: 1, Hour: 1, Day: 1, MinuteBytes: 100, HourBytes: 325, DayBytes: 400,
@@ -189,14 +249,14 @@ func TestCountGivesTheRequestsInEachWindow(t *testing.T) {
 	start := midnight()
 
 	for range 3 {
-		limiter.Count(client, start)
+		limiter.Count(client, start, whole)
 	}
 
 	// A quarter into the next hour, the minute has only this request. The
 	// hour still covers three quarters of the bucket before, with its three
 	// requests, which count 2.25, and this one: 3.25. The day covers all
 	// four.
-	counts, _, _ := limiter.Count(client, start.Add(time.Hour+time.Hour/4))
+	counts, _, _ := limiter.Count(client, start.Add(time.Hour+time.Hour/4), whole)
 
 	want := ratelimit.Counts{Minute: 1, Hour: 3.25, Day: 4}
 	if counts != want {
@@ -364,7 +424,7 @@ func wantCount(
 ) {
 	t.Helper()
 
-	_, hit, _ := limiter.Count(client, now)
+	_, hit, _ := limiter.Count(client, now, whole)
 	if hit.Window != want {
 		t.Errorf("request from %s at %s is over %q, want %q",
 			client, now.Format(time.RFC3339), hit.Window, want)
@@ -379,7 +439,7 @@ func wantBytesCount(
 ) {
 	t.Helper()
 
-	_, hit, _ := limiter.CountBytes(client, now, bytes)
+	_, hit, _ := limiter.CountBytes(client, now, bytes, whole)
 	if hit.Kind != want {
 		t.Errorf("%d bytes from %s at %s break a limit on %q, want %q",
 			bytes, client, now.Format(time.RFC3339), hit.Kind, want)

internal/ratelimit/snapshot_test.go

@@ -16,7 +16,7 @@ func TestSnapshotListsTheClientsByAddress(t *testing.T) {
 
 	limiter := ratelimit.New(ratelimit.Limits{})
 	for _, i := range []int{2, 3, 0, 1} {
-		limiter.Count(netip.MustParsePrefix(want[i]), midnight())
+		limiter.Count(netip.MustParsePrefix(want[i]), midnight(), whole)
 	}
 
 	snapshot := limiter.Snapshot()
@@ -63,8 +63,8 @@ func TestLoadEmptiesBucketsWhoseTimeHasPassed(t *testing.T) {
 	start := midnight()
 
 	limiter := ratelimit.New(ratelimit.Limits{})
-	limiter.Count(client, start)
+	limiter.Count(client, start, whole)
-	limiter.CountBytes(client, start, 5)
+	limiter.CountBytes(client, start, 5, whole)
 	limiter.AddToHistory(client, start, ratelimit.Request{Forwarded: true})
 
 	loaded := func(now time.Time) ratelimit.Client {

internal/requestlog/requestlog.go

@@ -117,6 +117,15 @@ type Line struct {
 	// ActionBanned, ActionCountryDenied, ActionRateLimited or
 	// ActionRuleBlocked.
 	WouldAction string `json:"would_action,omitempty"`
+	// LimitPercent and LimitPercentSetting are, for a request the rate
+	// limits counted whose client a biased threshold gives a percentage of
+	// the rate limits below 100, that percentage and the setting that gave
+	// it. BytesPercent and BytesPercentSetting are the same for the byte
+	// limits.
+	LimitPercent        *int64 `json:"limit_percent,omitempty"`
+	LimitPercentSetting string `json:"limit_percent_setting,omitempty"`
+	BytesPercent        *int64 `json:"bytes_percent,omitempty"`
+	BytesPercentSetting string `json:"bytes_percent_setting,omitempty"`
 	// Counts are, for a request the rate limits counted, the client's
 	// requests as they counted them with this one, and its bytes as the
 	// byte limits counted them, with this request's once it has ended if

internal/state/state_test.go

@@ -45,6 +45,9 @@ const (
 	// maxLogLines is how many lines of the process log wait for a test to
 	// read them.
 	maxLogLines = 64
+	// whole is the percentage of each limit a client gets when nothing
+	// lowers its limits.
+	whole = 100
 )
 
 // permanentBansJSON is bans.json holding permanentBan.
@@ -713,7 +716,7 @@ func TestFailedWriteLeavesTheFileAsItWas(t *testing.T) {
 
 	params.Ledger.BanForLimit(netip.MustParsePrefix("203.0.113.9/32"), midnight(),
 		bans.Notes{})
-	params.Limiter.Count(netip.MustParsePrefix("203.0.113.9/32"), midnight())
+	params.Limiter.Count(netip.MustParsePrefix("203.0.113.9/32"), midnight(), whole)
 
 	err = files.WriteAll()
 	if err == nil || !strings.Contains(err.Error(), bansJSON+".tmp") {
@@ -1320,10 +1323,10 @@ func fill(params state.Params) {
 		bans.Notes{RuleID: "env-file", Target: "path"})
 
 	for _, c := range []string{"2001:db8::/64", "203.0.113.9/32", "192.0.2.1/32"} {
-		params.Limiter.Count(netip.MustParsePrefix(c), now)
+		params.Limiter.Count(netip.MustParsePrefix(c), now, whole)
 	}
 
-	params.Limiter.CountBytes(client, now, 8)
+	params.Limiter.CountBytes(client, now, 8, whole)
 	params.Limiter.AddToHistory(client, now, ratelimit.Request{
 		Forwarded: true, Status: 200, RequestBytes: 3, ResponseBytes: 5,
 	})