Compare commits

..
Author SHA1 Message Date
clawbot 44e9d45cd1 waf: name the blacklist bans in the package doc
check / check (push) Successful in 8m52s
The package doc said waf answers rproxy's questions, takes its reports
and answers its own endpoints. The bans for AbuseIPDB's blacklist, made
as the reputation package fetches it, are none of these, so the new
file abuseipdbblacklist.go was outside it.

Model: opus-5-5
2026-11-19 10:18:47 +00:00
clawbot dfffeb73ec waf: ban the clients on AbuseIPDB's blacklist (closes #411)
check / check (push) Failing after 8m52s
While SWW_WAF_ABUSEIPDB_KEY is set, waf fetches AbuseIPDB's blacklist at
the start and every SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS
(60), cut at SWW_WAF_ABUSEIPDB_THRESHOLD (90, from 25 to 100). Each
listed client's netblock gets a ban of SWW_WAF_ABUSEIPDB_BAN_DAYS (30)
with the new cause abuseipdb. The blacklist itself is not kept.

These bans do not count toward SWW_WAF_MAX_BANS, so a 10,000-address
blacklist cannot push out the bans for limits and attacks. An ended
abuseipdb ban is forgotten at each fetch and each read of bans.json. A
netblock with an active ban is left alone, and so is one whose abuseipdb
ban an admin lifted, until that ban would have ended. Observe mode makes
no ban.

Model: opus-5-5
2026-11-19 10:03:42 +00:00
53 changed files with 1066 additions and 2057 deletions

No files matched your search

+5 -145
View File
@@ -424,8 +424,8 @@ full, and the limits that are fixed rather than settings.
Each example is a complete `compose.yaml`. `smallwebwaf` is the tag Each example is a complete `compose.yaml`. `smallwebwaf` is the tag
`make docker` gives the image; on another host, use the name you pushed it `make docker` gives the image; on another host, use the name you pushed it
under, by digest. Docker Compose puts the services on a private network of its under, by digest. Docker Compose puts the services on a private network of its
own, where each reaches the others by service name. Each example but "On the own, where each reaches the others by service name. Each example publishes
open internet" publishes `rproxy`'s port on the host, for trying it out. `rproxy`'s port on the host, for trying it out.
### Smallest setup ### Smallest setup
@@ -457,142 +457,6 @@ volumes:
waf-state: waf-state:
``` ```
### On the open internet
One gitea at `git.example.com`, with traefik in front of `rproxy`. traefik gets
the certificate from Let's Encrypt and is the only service with published ports.
`waf` sets what most sites set. More `waf` settings follow, commented out, each
with what it does and when to set it.
```yaml
services:
traefik:
# traefik v3.7.19, 2026-11-13
image: traefik@sha256:a6c0194dda77bcb804824580f36fa7edc56e315b1acfe933366c8b52844a78a4
restart: unless-stopped
command:
- --providers.docker=true
- --providers.docker.exposedByDefault=false
- --entryPoints.web.address=:80
- --entryPoints.websecure.address=:443
# Redirect plain HTTP to HTTPS.
- --entryPoints.web.http.redirections.entryPoint.to=websecure
- --entryPoints.web.http.redirections.entryPoint.scheme=https
# A Let's Encrypt certificate for each site, by the TLS-ALPN
# challenge on port 443.
- --entryPoints.websecure.http.tls.certResolver=le
- --certificatesResolvers.le.acme.email=hostmaster@example.com
- --certificatesResolvers.le.acme.storage=/letsencrypt/acme.json
- --certificatesResolvers.le.acme.tlsChallenge=true
# Give a request 10 minutes to arrive, rather than 1, for the
# large git pushes the rproxy lines below accept.
# - --entryPoints.websecure.transport.respondingTimeouts.readTimeout=600s
ports:
- "80:80"
- "443:443"
volumes:
- /var/run/docker.sock:/var/run/docker.sock:ro
- acme:/letsencrypt
app:
# Your app: here a gitea, which listens on port 3000.
image: registry.example/app@sha256:0000000000000000000000000000000000000000000000000000000000000000
restart: unless-stopped
rproxy:
image: smallwebwaf
restart: unless-stopped
environment:
SWW_RPROXY_WAF_BACKEND: http://waf:8080
SWW_RPROXY_UPSTREAM_URL: http://app:3000
# Accept git pushes up to 1 GiB, rather than 100 MiB, sent in
# up to 10 minutes, rather than 1, with traefik's readTimeout
# line above.
# SWW_RPROXY_MAX_REQUEST_SIZE: 1G
# SWW_RPROXY_MAX_REQUEST_TIME_MS: "600000"
labels:
- traefik.enable=true
- traefik.http.routers.git.rule=Host(`git.example.com`)
- traefik.http.routers.git.entryPoints=websecure
- traefik.http.services.git.loadBalancer.server.port=8080
waf:
image: smallwebwaf
restart: unless-stopped
environment:
SWW_COMMAND: waf
# The name in every log line, alert and metric. The default,
# the container's host name, is a random id under Compose.
SWW_WAF_INSTANCE_NAME: host1/waf
# The app each hostname serves. Only that app's fixes to the
# Core Rule Set apply there.
SWW_WAF_APPS: git.example.com:gitea
# Monitoring skips every check.
SWW_WAF_ALLOW_NETS: 192.0.2.10
# The office and the CI runner, which would exceed the rate
# limits, are never rate limited.
SWW_WAF_RATE_LIMIT_EXEMPT_NETS: 203.0.113.0/24,198.51.100.7
# WordPress paths, which only scanners ask a gitea for. One
# request for one bans the client.
SWW_WAF_TRAP_PATHS: /wp-login.php,/xmlrpc.php
# Spamhaus's list of netblocks hijacked or leased by
# criminals. Their clients are refused.
SWW_WAF_BLOCKLIST_URLS: https://www.spamhaus.org/drop/drop.txt
# The token for the ban endpoints, to lift a ban without
# editing bans.json.
SWW_WAF_ADMIN_TOKEN_FILE: /etc/sww/tokens/admin
# Alerts, such as one for each ban, to an ntfy topic.
SWW_WAF_ALERT_NTFY_URL: https://ntfy.example.com/smallwebwaf
# Refuse nothing and ban no one, for the first days. Each log
# line says what enforce mode would have done.
# SWW_WAF_MODE: observe
# The access token for an ntfy topic that is not public.
# SWW_WAF_ALERT_NTFY_TOKEN_FILE: /etc/sww/tokens/ntfy
# The token for /_sww/metrics, for Prometheus. Unset, the
# metrics are off.
# SWW_WAF_METRICS_TOKEN_FILE: /etc/sww/tokens/metrics
# 600 requests an hour rather than 1500, to ban slower
# scrapers. A fast human reader can reach it too.
# SWW_WAF_RATE_LIMIT_PER_HOUR: "600"
# A quarter of every limit for clients in two hosting
# networks, where scrapers run rather than people.
# SWW_WAF_TAG_LIMIT_PERCENT: asn=14061:25,asn=16276:25
# For a site only for people in a few countries. Clients
# elsewhere are refused, and so are any the lookup cannot place.
# SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES: de,at,ch
# Close a refused request's connection rather than answer
# 403. traefik then answers 502, so a scraper cannot tell a
# ban from a broken site.
# SWW_WAF_BAN_RESPONSE: close
# A copy of every log line to a syslog server.
# SWW_WAF_LOG_REMOTE_URL: syslog+tls://logs.example.com:6514
volumes:
- waf-state:/var/lib/sww
- /srv/sww/tokens:/etc/sww/tokens:ro
volumes:
acme:
waf-state:
```
Change these before the first start:
- `git.example.com`, in the router rule and in `SWW_WAF_APPS`;
- the email address for Let's Encrypt;
- the ntfy topic's URL;
- the app's image and port;
- the netblocks, which are documentation addresses.
Make the admin token file first, as for any token file:
```sh
mkdir -p /srv/sww/tokens
openssl rand -hex 32 > /srv/sww/tokens/admin
chown 65532:65532 /srv/sww/tokens/admin
chmod 0400 /srv/sww/tokens/admin
```
### Custom per-address limits ### Custom per-address limits
For a site with no API: For a site with no API:
@@ -896,8 +760,6 @@ stops the running process (see [`docs/state-files.md`](docs/state-files.md)).
- `cmd/sww`: the binary, which only calls `internal/sww`. - `cmd/sww`: the binary, which only calls `internal/sww`.
- `internal/sww`: the process, as the command it is given, and the health check. - `internal/sww`: the process, as the command it is given, and the health check.
It is the only package that imports `go.uber.org/fx`, which builds the parts
of `waf` and `rproxy`.
- `internal/config`: reads the settings, the one place they are read. - `internal/config`: reads the settings, the one place they are read.
- `internal/rproxy`: the reverse proxy in front of one app. - `internal/rproxy`: the reverse proxy in front of one app.
- `internal/waf`: `waf`'s server, which runs the checks and answers its own - `internal/waf`: `waf`'s server, which runs the checks and answers its own
@@ -906,11 +768,9 @@ stops the running process (see [`docs/state-files.md`](docs/state-files.md)).
`internal/coreruleset`, `internal/geojs`, `internal/lookup`, `internal/coreruleset`, `internal/geojs`, `internal/lookup`,
`internal/reputation`, `internal/routewatch`, `internal/anomaly` and `internal/reputation`, `internal/routewatch`, `internal/anomaly` and
`internal/alerts`: one check or source each. `internal/alerts`: one check or source each.
- `internal/state`: the state and cache files. - `internal/state`, `internal/requestlog`, `internal/remotelog` and
- `internal/requestlog`: the request log. `internal/metrics`: the state and cache files, the log lines, the syslog
- `internal/processlog`: the process's own messages. sender and the metrics.
- `internal/remotelog`: the syslog sender.
- `internal/metrics`: the metrics.
## Rationale ## Rationale
+3 -7
View File
@@ -69,9 +69,7 @@ never as a time.
that command's settings, and runs `internal/rproxy` until `SIGTERM` or that command's settings, and runs `internal/rproxy` until `SIGTERM` or
`SIGINT` (see "`rproxy`"). `sww healthcheck` is the image's health check. `SIGINT` (see "`rproxy`"). `sww healthcheck` is the image's health check.
With no command, or one it does not know, the binary prints the commands With no command, or one it does not know, the binary prints the commands
and exits with status 2. `internal/sww` is the only package that imports and exits with status 2.
`go.uber.org/fx`. fx builds the parts of `waf` and `rproxy`, and starts
and stops their background work.
- `internal/config`: reads the settings, the one place they are read. - `internal/config`: reads the settings, the one place they are read.
- `internal/waf`: `waf`'s server. It runs the checks in `check`, and holds - `internal/waf`: `waf`'s server. It runs the checks in `check`, and holds
`waf`'s question, answer and report. It answers `waf`'s own endpoints in `waf`'s question, answer and report. It answers `waf`'s own endpoints in
@@ -104,10 +102,8 @@ never as a time.
its own. its own.
- `internal/state`: reads the state and cache files at start, takes in edits - `internal/state`: reads the state and cache files at start, takes in edits
while running, and writes the files when due and at the stop. while running, and writes the files when due and at the stop.
- `internal/requestlog`: the request log, as JSON lines on stdout. - `internal/requestlog` and `internal/remotelog`: the lines on stdout, and
- `internal/processlog`: the process lines on stdout, which hold the sending them to the syslog server.
process's own messages.
- `internal/remotelog`: sends the lines on stdout to the syslog server.
- `internal/metrics`: the metrics, in the Prometheus text format. - `internal/metrics`: the metrics, in the Prometheus text format.
- `Dockerfile`: the lint and test phases, then the image. - `Dockerfile`: the lint and test phases, then the image.
`deploy/example-app` is an app built on the image, with `rproxy` in its `deploy/example-app` is an app built on the image, with `rproxy` in its
-4
View File
@@ -12,7 +12,6 @@ require (
github.com/oschwald/maxminddb-golang/v2 v2.7.0 github.com/oschwald/maxminddb-golang/v2 v2.7.0
github.com/prometheus/client_golang v1.24.1 github.com/prometheus/client_golang v1.24.1
github.com/spf13/viper v1.21.0 github.com/spf13/viper v1.21.0
go.uber.org/fx v1.24.0
golang.org/x/sys v0.48.0 golang.org/x/sys v0.48.0
) )
@@ -45,9 +44,6 @@ require (
github.com/tidwall/match v1.1.1 // indirect github.com/tidwall/match v1.1.1 // indirect
github.com/tidwall/pretty v1.2.1 // indirect github.com/tidwall/pretty v1.2.1 // indirect
github.com/valllabh/ocsf-schema-golang v1.0.3 // indirect github.com/valllabh/ocsf-schema-golang v1.0.3 // indirect
go.uber.org/dig v1.19.0 // indirect
go.uber.org/multierr v1.10.0 // indirect
go.uber.org/zap v1.26.0 // indirect
go.yaml.in/yaml/v3 v3.0.5 // indirect go.yaml.in/yaml/v3 v3.0.5 // indirect
go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect
golang.org/x/net v0.60.0 // indirect golang.org/x/net v0.60.0 // indirect
-8
View File
@@ -97,16 +97,8 @@ github.com/tidwall/pretty v1.2.1 h1:qjsOFOWWQl+N3RsoF5/ssm1pHmJJwhjlSbZ51I6wMl4=
github.com/tidwall/pretty v1.2.1/go.mod h1:ITEVvHYasfjBbM0u2Pg8T2nJnzm8xPwvNhhsoaGGjNU= github.com/tidwall/pretty v1.2.1/go.mod h1:ITEVvHYasfjBbM0u2Pg8T2nJnzm8xPwvNhhsoaGGjNU=
github.com/valllabh/ocsf-schema-golang v1.0.3 h1:eR8k/3jP/OOqB8LRCtdJ4U+vlgd/gk5y3KMXoodrsrw= github.com/valllabh/ocsf-schema-golang v1.0.3 h1:eR8k/3jP/OOqB8LRCtdJ4U+vlgd/gk5y3KMXoodrsrw=
github.com/valllabh/ocsf-schema-golang v1.0.3/go.mod h1:sZ3as9xqm1SSK5feFWIR2CuGeGRhsM7TR1MbpBctzPk= github.com/valllabh/ocsf-schema-golang v1.0.3/go.mod h1:sZ3as9xqm1SSK5feFWIR2CuGeGRhsM7TR1MbpBctzPk=
go.uber.org/dig v1.19.0 h1:BACLhebsYdpQ7IROQ1AGPjrXcP5dF80U3gKoFzbaq/4=
go.uber.org/dig v1.19.0/go.mod h1:Us0rSJiThwCv2GteUN0Q7OKvU7n5J4dxZ9JKUXozFdE=
go.uber.org/fx v1.24.0 h1:wE8mruvpg2kiiL1Vqd0CC+tr0/24XIB10Iwp2lLWzkg=
go.uber.org/fx v1.24.0/go.mod h1:AmDeGyS+ZARGKM4tlH4FY2Jr63VjbEDJHtqXTGP5hbo=
go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto= go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE= go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
go.uber.org/multierr v1.10.0 h1:S0h4aNzvfcFsC3dRF1jLoaov7oRaKqRGC/pUEJ2yvPQ=
go.uber.org/multierr v1.10.0/go.mod h1:20+QtiLqy0Nd6FdQB9TLXag12DsQkrbs3htMFfDN80Y=
go.uber.org/zap v1.26.0 h1:sI7k6L95XOKS281NhVKOFCUNIvv9e0w4BF8N3u+tCRo=
go.uber.org/zap v1.26.0/go.mod h1:dtElttAiwGvoJ/vj4IwHBS/gXsEu/pZ50mUIRWuG0so=
go.yaml.in/yaml/v2 v2.4.4 h1:tuyd0P+2Ont/d6e2rl3be67goVK4R6deVxCUX5vyPaQ= go.yaml.in/yaml/v2 v2.4.4 h1:tuyd0P+2Ont/d6e2rl3be67goVK4R6deVxCUX5vyPaQ=
go.yaml.in/yaml/v2 v2.4.4/go.mod h1:gMZqIpDtDqOfM0uNfy0SkpRhvUryYH0Z6wdMYcacYXQ= go.yaml.in/yaml/v2 v2.4.4/go.mod h1:gMZqIpDtDqOfM0uNfy0SkpRhvUryYH0Z6wdMYcacYXQ=
go.yaml.in/yaml/v3 v3.0.5 h1:N6y/pJk8buWs9NY5ERU2HSMfm+IuD/OtfdAnq6kESPw= go.yaml.in/yaml/v3 v3.0.5 h1:N6y/pJk8buWs9NY5ERU2HSMfm+IuD/OtfdAnq6kESPw=
+32 -93
View File
@@ -75,7 +75,7 @@ type WAF struct {
BytesLimitPerMinute int64 BytesLimitPerMinute int64
BytesLimitPerHour int64 BytesLimitPerHour int64
BytesLimitPerDay int64 BytesLimitPerDay int64
BytesCounted BytesCounted BytesCounted string
// LookupSource is where each client's AS number and country are looked // LookupSource is where each client's AS number and country are looked
// up (SWW_WAF_LOOKUP_SOURCE): geojs, file, or off for nowhere. // up (SWW_WAF_LOOKUP_SOURCE): geojs, file, or off for nowhere.
// LookupDBPath is the lookup database, the IPinfo Lite file looked up in // LookupDBPath is the lookup database, the IPinfo Lite file looked up in
@@ -86,7 +86,7 @@ type WAF struct {
// AddLookupHeaders is true when the app is passed the client's AS number // AddLookupHeaders is true when the app is passed the client's AS number
// and country in headers (SWW_WAF_ADD_LOOKUP_HEADERS), by default unless // and country in headers (SWW_WAF_ADD_LOOKUP_HEADERS), by default unless
// LookupSource is off. // LookupSource is off.
LookupSource LookupSource LookupSource string
LookupDBPath string LookupDBPath string
ASNAndCountryLookupTimeout time.Duration ASNAndCountryLookupTimeout time.Duration
AddLookupHeaders bool AddLookupHeaders bool
@@ -131,7 +131,7 @@ type WAF struct {
// BlocklistLimitPercent is the percentage of every limit it gets. // BlocklistLimitPercent is the percentage of every limit it gets.
BlocklistURLs []string BlocklistURLs []string
BlocklistRefresh time.Duration BlocklistRefresh time.Duration
BlocklistAction ReputationAction BlocklistAction string
BlocklistLimitPercent int64 BlocklistLimitPercent int64
// DNSBLZones are the DNSBL zones clients are asked about // DNSBLZones are the DNSBL zones clients are asked about
// (SWW_WAF_DNSBL_ZONES), through DNSBLResolver (SWW_WAF_DNSBL_RESOLVER), or // (SWW_WAF_DNSBL_ZONES), through DNSBLResolver (SWW_WAF_DNSBL_RESOLVER), or
@@ -154,7 +154,7 @@ type WAF struct {
AbuseIPDBKey string AbuseIPDBKey string
AbuseIPDBMinScore int64 AbuseIPDBMinScore int64
AbuseIPDBDailyBudget int AbuseIPDBDailyBudget int
DNSBLAbuseIPDBAction ReputationAction DNSBLAbuseIPDBAction string
DNSBLAbuseIPDBLimitPercent int64 DNSBLAbuseIPDBLimitPercent int64
IPReputationCacheTTL time.Duration IPReputationCacheTTL time.Duration
DNSBLAbuseIPDBTimeout time.Duration DNSBLAbuseIPDBTimeout time.Duration
@@ -237,7 +237,7 @@ type WAF struct {
// reads none. // reads none.
// CoreRuleSetExclusionsFile is the path of the file of its exclusions // CoreRuleSetExclusionsFile is the path of the file of its exclusions
// (SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE), "" while there is none. // (SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE), "" while there is none.
CoreRuleSetMode CoreRuleSetMode CoreRuleSetMode string
CoreRuleSetParanoiaLevel int CoreRuleSetParanoiaLevel int
CoreRuleSetScoreThreshold int CoreRuleSetScoreThreshold int
CoreRuleSetDisabledRules []int CoreRuleSetDisabledRules []int
@@ -316,66 +316,20 @@ type WAF struct {
settings []slog.Attr settings []slog.Attr
} }
// BytesCounted is which body bytes count toward the byte limits and the
// byte anomaly thresholds, a value of SWW_WAF_BYTES_COUNTED.
type BytesCounted string
// The values of SWW_WAF_BYTES_COUNTED.
const (
// BytesCountedResponse counts the response's body bytes.
BytesCountedResponse BytesCounted = "response"
// BytesCountedRequest counts the request's body bytes.
BytesCountedRequest BytesCounted = "request"
// BytesCountedBoth counts the body bytes of both.
BytesCountedBoth BytesCounted = "both"
)
// LookupSource is where each client's AS number and country are looked up,
// a value of SWW_WAF_LOOKUP_SOURCE.
type LookupSource string
// The values of SWW_WAF_LOOKUP_SOURCE.
const (
// LookupSourceGeoJS asks GeoJS.
LookupSourceGeoJS LookupSource = "geojs"
// LookupSourceFile looks clients up in the lookup database, the file
// SWW_WAF_LOOKUP_DB_PATH names.
LookupSourceFile LookupSource = "file"
// LookupSourceOff looks no client up.
LookupSourceOff LookupSource = "off"
)
// ReputationAction is what is done with a client a reputation source
// lists, a value of SWW_WAF_BLOCKLIST_ACTION and of
// SWW_WAF_DNSBL_ABUSEIPDB_ACTION.
type ReputationAction string
// The values of SWW_WAF_BLOCKLIST_ACTION and SWW_WAF_DNSBL_ABUSEIPDB_ACTION.
const (
// ReputationActionDeny refuses the client's requests.
ReputationActionDeny ReputationAction = "deny"
// ReputationActionLimit gives the client a percentage of every limit,
// written limit:<percent> in the setting.
ReputationActionLimit ReputationAction = "limit"
// ReputationActionLog only notes the hit in the log line and raises an
// alert.
ReputationActionLog ReputationAction = "log"
)
// CoreRuleSetMode is what the Core Rule Set does, a value of
// SWW_WAF_CORE_RULE_SET_MODE.
type CoreRuleSetMode string
// The values of SWW_WAF_CORE_RULE_SET_MODE. // The values of SWW_WAF_CORE_RULE_SET_MODE.
const ( const (
// CoreRuleSetModeOff runs no request through the Core Rule Set. // CoreRuleSetModeOff runs no request through the Core Rule Set.
CoreRuleSetModeOff CoreRuleSetMode = "off" CoreRuleSetModeOff = off
// CoreRuleSetModeDetect logs and alerts a match, and refuses nothing. // CoreRuleSetModeDetect logs and alerts a match, and refuses nothing.
CoreRuleSetModeDetect CoreRuleSetMode = "detect" CoreRuleSetModeDetect = "detect"
// CoreRuleSetModeBlock refuses a match with 403. // CoreRuleSetModeBlock refuses a match with 403.
CoreRuleSetModeBlock CoreRuleSetMode = "block" CoreRuleSetModeBlock = "block"
) )
// fileSource is the SWW_WAF_LOOKUP_SOURCE that looks clients up in the
// lookup database, the file SWW_WAF_LOOKUP_DB_PATH names.
const fileSource = "file"
const ( const (
day = 24 * time.Hour day = 24 * time.Hour
ipv4Bits = 32 ipv4Bits = 32
@@ -604,13 +558,10 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
), ),
BytesLimitPerHour: env.size("SWW_WAF_BYTES_LIMIT_PER_HOUR", "50G"), BytesLimitPerHour: env.size("SWW_WAF_BYTES_LIMIT_PER_HOUR", "50G"),
BytesLimitPerDay: env.size("SWW_WAF_BYTES_LIMIT_PER_DAY", "100G"), BytesLimitPerDay: env.size("SWW_WAF_BYTES_LIMIT_PER_DAY", "100G"),
BytesCounted: env.bytesCounted( BytesCounted: env.bytesCounted("SWW_WAF_BYTES_COUNTED", "both"),
"SWW_WAF_BYTES_COUNTED",
BytesCountedBoth,
),
LookupSource: env.lookupSource( LookupSource: env.lookupSource(
"SWW_WAF_LOOKUP_SOURCE", "SWW_WAF_LOOKUP_SOURCE",
LookupSourceGeoJS, "geojs",
), ),
LookupDBPath: env.value("SWW_WAF_LOOKUP_DB_PATH", ""), LookupDBPath: env.value("SWW_WAF_LOOKUP_DB_PATH", ""),
ASNAndCountryLookupTimeout: env.milliseconds( ASNAndCountryLookupTimeout: env.milliseconds(
@@ -807,9 +758,9 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
cfg.InstanceName, cfg.LogRemoteURL != nil) cfg.InstanceName, cfg.LogRemoteURL != nil)
// The app gets the headers by default, unless no client is looked up. // The app gets the headers by default, unless no client is looked up.
cfg.AddLookupHeaders = env.boolean("SWW_WAF_ADD_LOOKUP_HEADERS", cfg.AddLookupHeaders = env.boolean("SWW_WAF_ADD_LOOKUP_HEADERS",
strconv.FormatBool(cfg.LookupSource != LookupSourceOff)) strconv.FormatBool(cfg.LookupSource != off))
cfg.BlocklistAction, cfg.BlocklistLimitPercent = env.action( cfg.BlocklistAction, cfg.BlocklistLimitPercent = env.action(
"SWW_WAF_BLOCKLIST_ACTION", string(ReputationActionDeny)) "SWW_WAF_BLOCKLIST_ACTION", "deny")
cfg.DNSBLAbuseIPDBAction, cfg.DNSBLAbuseIPDBLimitPercent = env.action( cfg.DNSBLAbuseIPDBAction, cfg.DNSBLAbuseIPDBLimitPercent = env.action(
"SWW_WAF_DNSBL_ABUSEIPDB_ACTION", "limit:25") "SWW_WAF_DNSBL_ABUSEIPDB_ACTION", "limit:25")
@@ -907,12 +858,9 @@ func (e *environment) count(name, defaultValue string) int64 {
// bytesCounted reads the setting that is which body bytes count toward the // bytesCounted reads the setting that is which body bytes count toward the
// byte limits and the byte anomaly thresholds: response, request or both. // byte limits and the byte anomaly thresholds: response, request or both.
func (e *environment) bytesCounted( func (e *environment) bytesCounted(name, defaultValue string) string {
name string, defaultValue BytesCounted, value := e.value(name, defaultValue)
) BytesCounted { if value != "response" && value != "request" && value != "both" {
value := BytesCounted(e.value(name, string(defaultValue)))
if value != BytesCountedResponse && value != BytesCountedRequest &&
value != BytesCountedBoth {
e.check(name, fmt.Errorf("%q %w", value, errNotBytesCounted)) e.check(name, fmt.Errorf("%q %w", value, errNotBytesCounted))
} }
@@ -957,10 +905,8 @@ func (e *environment) trapPaths(name string) []string {
// coreRuleSetMode reads the setting that is what the Core Rule Set does: off, // coreRuleSetMode reads the setting that is what the Core Rule Set does: off,
// detect or block. // detect or block.
func (e *environment) coreRuleSetMode( func (e *environment) coreRuleSetMode(name, defaultValue string) string {
name string, defaultValue CoreRuleSetMode, mode := e.value(name, defaultValue)
) CoreRuleSetMode {
mode := CoreRuleSetMode(e.value(name, string(defaultValue)))
if mode != CoreRuleSetModeOff && mode != CoreRuleSetModeDetect && if mode != CoreRuleSetModeOff && mode != CoreRuleSetModeDetect &&
mode != CoreRuleSetModeBlock { mode != CoreRuleSetModeBlock {
e.check(name, fmt.Errorf("%q %w", mode, errNotCoreRuleSetMode)) e.check(name, fmt.Errorf("%q %w", mode, errNotCoreRuleSetMode))
@@ -1110,24 +1056,20 @@ func (e *environment) refresh(name, defaultValue string) time.Duration {
// action reads a setting that is what is done with a client a blocklist // action reads a setting that is what is done with a client a blocklist
// or a DNSBL zone lists: deny, log, or limit:<percent>, which it returns // or a DNSBL zone lists: deny, log, or limit:<percent>, which it returns
// as limit and the percentage. // as limit and the percentage.
func (e *environment) action( func (e *environment) action(name, defaultValue string) (string, int64) {
name, defaultValue string, value := e.value(name, defaultValue)
) (ReputationAction, int64) { if value == "deny" || value == "log" {
value := ReputationAction(e.value(name, defaultValue))
if value == ReputationActionDeny || value == ReputationActionLog {
return value, 0 return value, 0
} }
percentText, isLimit := strings.CutPrefix( percentText, isLimit := strings.CutPrefix(value, "limit:")
string(value), string(ReputationActionLimit)+":",
)
percent, err := ParsePercent(percentText) percent, err := ParsePercent(percentText)
if !isLimit || err != nil { if !isLimit || err != nil {
e.check(name, fmt.Errorf("%q %w", value, errNotAction)) e.check(name, fmt.Errorf("%q %w", value, errNotAction))
} }
return ReputationActionLimit, percent return "limit", percent
} }
// zones reads the setting that is the list of DNSBL zones. It is empty by // zones reads the setting that is the list of DNSBL zones. It is empty by
@@ -1178,12 +1120,9 @@ func (e *environment) routeWatchURL(name string) string {
// lookupSource reads the setting that is where clients are looked up: // lookupSource reads the setting that is where clients are looked up:
// geojs, file, or off. // geojs, file, or off.
func (e *environment) lookupSource( func (e *environment) lookupSource(name, defaultValue string) string {
name string, defaultValue LookupSource, source := e.value(name, defaultValue)
) LookupSource { if source != "geojs" && source != fileSource && source != off {
source := LookupSource(e.value(name, string(defaultValue)))
if source != LookupSourceGeoJS && source != LookupSourceFile &&
source != LookupSourceOff {
e.check(name, fmt.Errorf("%q %w", source, errNotLookupSource)) e.check(name, fmt.Errorf("%q %w", source, errNotLookupSource))
} }
@@ -1195,12 +1134,12 @@ func (e *environment) lookupSource(
// one source at a time. // one source at a time.
func (e *environment) checkLookupDBPath(cfg *WAF) { func (e *environment) checkLookupDBPath(cfg *WAF) {
switch { switch {
case cfg.LookupSource == LookupSourceFile && cfg.LookupDBPath == "": case cfg.LookupSource == fileSource && cfg.LookupDBPath == "":
e.check("SWW_WAF_LOOKUP_SOURCE", fmt.Errorf( e.check("SWW_WAF_LOOKUP_SOURCE", fmt.Errorf(
"is file while SWW_WAF_LOOKUP_DB_PATH is unset; %w", "is file while SWW_WAF_LOOKUP_DB_PATH is unset; %w",
errNeedsDBPath, errNeedsDBPath,
)) ))
case cfg.LookupSource != LookupSourceFile && cfg.LookupDBPath != "": case cfg.LookupSource != fileSource && cfg.LookupDBPath != "":
e.check("SWW_WAF_LOOKUP_DB_PATH", fmt.Errorf( e.check("SWW_WAF_LOOKUP_DB_PATH", fmt.Errorf(
"is set while SWW_WAF_LOOKUP_SOURCE is %s; %w", "is set while SWW_WAF_LOOKUP_SOURCE is %s; %w",
cfg.LookupSource, cfg.LookupSource,
@@ -1225,7 +1164,7 @@ func (e *environment) checkCountriesAndLookups(cfg *WAF) {
} }
} }
if cfg.LookupSource != LookupSourceOff { if cfg.LookupSource != off {
return return
} }
+5 -6
View File
@@ -614,7 +614,7 @@ func TestCoreRuleSetSettings(t *testing.T) {
}, },
{ {
environment{ environment{
coreRuleSetMode: string(config.CoreRuleSetModeDetect), coreRuleSetMode: config.CoreRuleSetModeDetect,
coreRuleSetParanoiaLevel: "4", coreRuleSetParanoiaLevel: "4",
coreRuleSetScoreThreshold: "10", coreRuleSetScoreThreshold: "10",
coreRuleSetDisabledRules: "942100, 920350", coreRuleSetDisabledRules: "942100, 920350",
@@ -2033,9 +2033,8 @@ func TestReputationSettingsAsSet(t *testing.T) {
} }
for _, tc := range []struct { for _, tc := range []struct {
value string value, action string
action config.ReputationAction percent int64
percent int64
}{ }{
{actionDeny, actionDeny, 0}, {actionDeny, actionDeny, 0},
{actionLog, actionLog, 0}, {actionLog, actionLog, 0},
@@ -2168,7 +2167,7 @@ func TestDNSBLSettingsAsSet(t *testing.T) {
// want are the zones, resolver, action and percent config.WAF gives. // want are the zones, resolver, action and percent config.WAF gives.
want []string want []string
wantResolver string wantResolver string
wantAction config.ReputationAction wantAction string
wantPercent int64 wantPercent int64
}{ }{
{ {
@@ -3050,7 +3049,7 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
logLevel: "info", logLevel: "info",
ruleFilesDir: "/etc/sww/rules.d", ruleFilesDir: "/etc/sww/rules.d",
ruleFilesEnabled: "true", ruleFilesEnabled: "true",
coreRuleSetMode: string(config.CoreRuleSetModeBlock), coreRuleSetMode: config.CoreRuleSetModeBlock,
coreRuleSetParanoiaLevel: "1", coreRuleSetParanoiaLevel: "1",
coreRuleSetScoreThreshold: "5", coreRuleSetScoreThreshold: "5",
coreRuleSetDisabledRules: defaultCoreRuleSetDisabledRules, coreRuleSetDisabledRules: defaultCoreRuleSetDisabledRules,
+37 -60
View File
@@ -84,7 +84,12 @@ type Params struct {
// one request to GeoJS is under way at a time, and it asks about every // one request to GeoJS is under way at a time, and it asks about every
// client waiting, up to maxPerRequest. It is safe for concurrent use. // client waiting, up to maxPerRequest. It is safe for concurrent use.
type GeoJS struct { type GeoJS struct {
params Params url string
answered func(Answer)
now func() time.Time
asked func()
failed func(err error, askingAgainIn time.Duration)
wentWithoutAnswer func()
// httpClient follows no redirect, so that visitors' addresses go to // httpClient follows no redirect, so that visitors' addresses go to
// GeoJS alone: a redirect is a failure. // GeoJS alone: a redirect is a failure.
httpClient *http.Client httpClient *http.Client
@@ -94,13 +99,8 @@ type GeoJS struct {
// waiting are the clients without an answer: those to ask GeoJS about, // waiting are the clients without an answer: those to ask GeoJS about,
// and those it is being asked about. // and those it is being asked about.
waiting map[netip.Prefix]*wait waiting map[netip.Prefix]*wait
// asking is true while a request to GeoJS is under way, and endAsking // asking is true while a request to GeoJS is under way.
// ends it. stopped is true once StopAsking has been called, and asking bool
// askGoroutines waits for the goroutine that makes the requests.
asking bool
endAsking context.CancelFunc
stopped bool
askGoroutines sync.WaitGroup
// retryDelay is how long GeoJS is left alone after its last failure, // retryDelay is how long GeoJS is left alone after its last failure,
// zero after an answer; retryAt is when it may be asked again. // zero after an answer; retryAt is when it may be asked again.
retryDelay time.Duration retryDelay time.Duration
@@ -140,7 +140,12 @@ func New(params Params) *GeoJS {
} }
return &GeoJS{ return &GeoJS{
params: params, url: params.URL,
answered: params.Answered,
now: params.Now,
asked: params.Asked,
failed: params.Failed,
wentWithoutAnswer: params.WentWithoutAnswer,
httpClient: &http.Client{ httpClient: &http.Client{
CheckRedirect: func(*http.Request, []*http.Request) error { CheckRedirect: func(*http.Request, []*http.Request) error {
return http.ErrUseLastResponse return http.ErrUseLastResponse
@@ -183,7 +188,7 @@ func (g *GeoJS) LookUp(
answer, found := g.kept(client) answer, found := g.kept(client)
if !found { if !found {
g.params.WentWithoutAnswer() g.wentWithoutAnswer()
} }
w, waiting := g.waiting[client] w, waiting := g.waiting[client]
@@ -205,23 +210,6 @@ func (g *GeoJS) LookUpWithoutWaiting(
return answer return answer
} }
// StopAsking ends the request to GeoJS under way, and returns once the
// goroutine that made it has. A request it ends is no failure: Failed is not
// called, and GeoJS is not left alone after it. After StopAsking, GeoJS is
// asked nothing.
func (g *GeoJS) StopAsking() {
g.mu.Lock()
g.stopped = true
if g.asking {
g.endAsking()
}
g.mu.Unlock()
g.askGoroutines.Wait()
}
// Kept returns client's answer, if one is kept, without asking GeoJS. // Kept returns client's answer, if one is kept, without asking GeoJS.
func (g *GeoJS) Kept(client netip.Prefix) (Answer, bool) { func (g *GeoJS) Kept(client netip.Prefix) (Answer, bool) {
g.mu.Lock() g.mu.Lock()
@@ -263,7 +251,7 @@ func (g *GeoJS) Load(answers []Answer) {
g.answers.Purge() g.answers.Purge()
now := g.params.Now() now := g.now()
for _, answer := range answers { for _, answer := range answers {
if now.Sub(answer.Answered) < keepFor { if now.Sub(answer.Answered) < keepFor {
@@ -300,19 +288,18 @@ func (g *GeoJS) answerOrWait(
} }
if w == nil { if w == nil {
g.params.WentWithoutAnswer() g.wentWithoutAnswer()
return Answer{}, nil // too many clients wait already return Answer{}, nil // too many clients wait already
} }
if !g.asking { if !g.asking {
// GeoJS is left alone after a failure, or asked nothing after // GeoJS is left alone after a failure, so no answer can come.
// StopAsking, so no answer can come.
w.late = true w.late = true
} }
if w.late { if w.late {
g.params.WentWithoutAnswer() g.wentWithoutAnswer()
return Answer{}, nil return Answer{}, nil
} }
@@ -323,7 +310,7 @@ func (g *GeoJS) answerOrWait(
// kept returns client's answer, if GeoJS gave it less than keepFor ago, // kept returns client's answer, if GeoJS gave it less than keepFor ago,
// and notes that it was used. // and notes that it was used.
func (g *GeoJS) kept(client netip.Prefix) (Answer, bool) { func (g *GeoJS) kept(client netip.Prefix) (Answer, bool) {
now := g.params.Now() now := g.now()
kept, found := g.answers.Get(client) kept, found := g.answers.Get(client)
if !found || now.Sub(kept.Answered) >= keepFor { if !found || now.Sub(kept.Answered) >= keepFor {
@@ -336,28 +323,22 @@ func (g *GeoJS) kept(client netip.Prefix) (Answer, bool) {
} }
// ask starts asking GeoJS about the waiting clients, unless a request to // ask starts asking GeoJS about the waiting clients, unless a request to
// it is under way, it is left alone after a failure, or StopAsking has // it is under way or it is left alone after a failure. The requests to
// been called. The requests to GeoJS are for every client waiting, so they // GeoJS are for every client waiting, so they go on when the caller whose
// go on when the caller whose ctx is given stops waiting, until StopAsking. // ctx is given stops waiting.
func (g *GeoJS) ask(ctx context.Context) { func (g *GeoJS) ask(ctx context.Context) {
if g.asking || g.stopped || g.params.Now().Before(g.retryAt) { if g.asking || g.now().Before(g.retryAt) {
return return
} }
askCtx, end := context.WithCancel(context.WithoutCancel(ctx)) g.asking = true
g.asking, g.endAsking = true, end
g.askGoroutines.Go(func() { go g.askAboutWaiting(context.WithoutCancel(ctx))
defer end()
g.askAboutWaiting(askCtx)
})
} }
// askAboutWaiting asks GeoJS about the waiting clients, one request at a // askAboutWaiting asks GeoJS about the waiting clients, one request at a
// time, until none is left, GeoJS fails, or StopAsking ends ctx. Each // time, until none is left or GeoJS fails. Each answer kept is given to
// answer kept is given to Answered, outside the lock, since Answered takes // Answered, outside the lock, since Answered takes locks of its own.
// locks of its own.
func (g *GeoJS) askAboutWaiting(ctx context.Context) { func (g *GeoJS) askAboutWaiting(ctx context.Context) {
for { for {
clients := g.nextClients() clients := g.nextClients()
@@ -366,15 +347,11 @@ func (g *GeoJS) askAboutWaiting(ctx context.Context) {
} }
given, err := g.request(ctx, clients) given, err := g.request(ctx, clients)
if err != nil && ctx.Err() != nil {
continue // ended by StopAsking, which is no failure
}
kept, answered := g.keep(clients, given, err) kept, answered := g.keep(clients, given, err)
if g.params.Answered != nil { if g.answered != nil {
for _, answer := range kept { for _, answer := range kept {
g.params.Answered(answer) g.answered(answer)
} }
} }
@@ -385,13 +362,13 @@ func (g *GeoJS) askAboutWaiting(ctx context.Context) {
} }
// nextClients returns up to maxPerRequest of the waiting clients. When // nextClients returns up to maxPerRequest of the waiting clients. When
// none is waiting, or StopAsking has been called, it returns none and // none is waiting, it returns none and notes that no request to GeoJS is
// notes that no request to GeoJS is under way. // under way.
func (g *GeoJS) nextClients() []netip.Prefix { func (g *GeoJS) nextClients() []netip.Prefix {
g.mu.Lock() g.mu.Lock()
defer g.mu.Unlock() defer g.mu.Unlock()
if len(g.waiting) == 0 || g.stopped { if len(g.waiting) == 0 {
g.asking = false g.asking = false
return nil return nil
@@ -423,7 +400,7 @@ func (g *GeoJS) keep(
g.mu.Lock() g.mu.Lock()
defer g.mu.Unlock() defer g.mu.Unlock()
now := g.params.Now() now := g.now()
kept := make([]Answer, 0, len(clients)) kept := make([]Answer, 0, len(clients))
leftOut := 0 leftOut := 0
@@ -467,7 +444,7 @@ func (g *GeoJS) keep(
w.late = true w.late = true
} }
g.params.Failed(err, g.retryDelay) g.failed(err, g.retryDelay)
return kept, false return kept, false
} }
@@ -497,7 +474,7 @@ func (g *GeoJS) request(
req, err := http.NewRequestWithContext( req, err := http.NewRequestWithContext(
ctx, ctx,
http.MethodGet, http.MethodGet,
g.params.URL, g.url,
http.NoBody, http.NoBody,
) )
if err != nil { if err != nil {
@@ -506,7 +483,7 @@ func (g *GeoJS) request(
req.URL.RawQuery = "ip=" + strings.Join(addrs, ",") req.URL.RawQuery = "ip=" + strings.Join(addrs, ",")
g.params.Asked() g.asked()
res, err := g.httpClient.Do(req) res, err := g.httpClient.Do(req)
if err != nil { if err != nil {
-38
View File
@@ -318,44 +318,6 @@ func TestCallerWhoseContextEndsEarlyDoesNotStopTheRequest(t *testing.T) {
}) })
} }
func TestStopAskingEndsTheRequestUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
service, _, g, reports := startWithReports()
clients := newClients()
service.set(hanging)
g.LookUpWithoutWaiting(t.Context(), clients())
waitForRequests(t, service, 1)
// The request is ended, not waited out, and is no failure.
began := time.Now()
g.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
reports.wantFailures(t)
// A new client is then not asked about, and its lookup does not
// wait.
service.set(answering)
wantCountry(t, g, clients(), "")
if waited := time.Since(began); waited != 0 {
t.Errorf("the lookup returned after %s, want at once", waited)
}
waitForRequests(t, service, 1)
reports.wantFailures(t)
})
}
func TestRequestOver10SecondsIsAFailure(t *testing.T) { func TestRequestOver10SecondsIsAFailure(t *testing.T) {
t.Parallel() t.Parallel()
-44
View File
@@ -1,44 +0,0 @@
// Package processlog builds the logger for the process's own messages,
// which it writes as JSON lines marked "type":"process". The request log
// is package requestlog's.
package processlog
import (
"io"
"log/slog"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
// Params are what New needs.
type Params struct {
// Output is where the lines are written.
Output io.Writer
// InstanceName, SWW_WAF_INSTANCE_NAME, is each line's instance.
InstanceName string
// Level, SWW_WAF_LOG_LEVEL, is the least severe level written.
Level slog.Level
}
// New returns the logger for the process's own messages: JSON lines on
// params.Output, marked "type":"process", with the time in the same form
// as a request line's. It writes only the messages at params.Level or more
// severe; the request lines requestlog.Write writes are never held back.
func New(params Params) *slog.Logger {
handler := slog.NewJSONHandler(params.Output, &slog.HandlerOptions{
Level: params.Level,
ReplaceAttr: func(groups []string, attr slog.Attr) slog.Attr {
if attr.Key == slog.TimeKey && len(groups) == 0 {
return slog.String(
slog.TimeKey,
requestlog.FormatTime(attr.Value.Time()),
)
}
return attr
},
})
return slog.New(handler).
With("type", "process", "instance", params.InstanceName)
}
-105
View File
@@ -1,105 +0,0 @@
package processlog_test
import (
"bytes"
"encoding/json"
"log/slog"
"slices"
"strings"
"testing"
"time"
"sneak.berlin/go/smallwebwaf/internal/processlog"
)
// instanceName is the instance the tests' loggers are built with.
const instanceName = "host1/blog"
func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
t.Parallel()
var out bytes.Buffer
processlog.New(processlog.Params{
Output: &out,
InstanceName: instanceName,
Level: slog.LevelInfo,
}).
Info("starting",
"version", "v1")
var fields map[string]any
err := json.Unmarshal(out.Bytes(), &fields)
if err != nil {
t.Fatalf("decode %q: %v", out.String(), err)
}
if fields["type"] != "process" ||
fields["instance"] != "host1/blog" ||
fields["msg"] != "starting" ||
fields["level"] != "INFO" ||
fields["version"] != "v1" {
t.Errorf("process line %v", fields)
}
timeText, _ := fields["time"].(string)
logged, err := time.Parse(time.RFC3339, timeText)
if err != nil || !strings.HasSuffix(timeText, "Z") ||
len(timeText) != len("2006-01-02T15:04:05.000Z") ||
time.Since(logged) > time.Minute {
t.Errorf(
"process line time %q, want now in UTC with milliseconds",
timeText,
)
}
}
func TestProcessLoggerWritesTheMessagesAtItsLevelOrMoreSevere(t *testing.T) {
t.Parallel()
levels := []slog.Level{
slog.LevelDebug, slog.LevelInfo, slog.LevelWarn, slog.LevelError,
}
for i, level := range levels {
t.Run(level.String(), func(t *testing.T) {
t.Parallel()
var out bytes.Buffer
processLog := processlog.New(processlog.Params{
Output: &out,
InstanceName: instanceName,
Level: level,
})
for _, at := range levels {
processLog.Log(t.Context(), at, "message")
}
var got, want []string
for line := range strings.Lines(out.String()) {
var fields struct {
Level string `json:"level"`
}
err := json.Unmarshal([]byte(line), &fields)
if err != nil {
t.Fatalf("decode %q: %v", line, err)
}
got = append(got, fields.Level)
}
for _, written := range levels[i:] {
want = append(want, written.String())
}
if !slices.Equal(got, want) {
t.Errorf("lines at %v, want %v", got, want)
}
})
}
}
+4 -7
View File
@@ -11,7 +11,7 @@ import (
func TestHistoryKeepsEveryRequest(t *testing.T) { func TestHistoryKeepsEveryRequest(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -57,7 +57,7 @@ func TestHistoryKeepsEveryRequest(t *testing.T) {
func TestLookupReachesTheHistoryOfAClientInTheTable(t *testing.T) { func TestLookupReachesTheHistoryOfAClientInTheTable(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
other := netip.MustParsePrefix("198.51.100.7/32") other := netip.MustParsePrefix("198.51.100.7/32")
start := midnight() start := midnight()
@@ -100,10 +100,7 @@ func TestLookupReachesTheHistoryOfAClientInTheTable(t *testing.T) {
func TestResetKeepsTheHistory(t *testing.T) { func TestResetKeepsTheHistory(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{PerMinute: limit}, tableSize)
Limits: ratelimit.Limits{PerMinute: limit},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -126,7 +123,7 @@ func TestResetKeepsTheHistory(t *testing.T) {
func TestRequestsAddsUpTheClientsInsideTheNetblock(t *testing.T) { func TestRequestsAddsUpTheClientsInsideTheNetblock(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
for client, requests := range map[string]int{ for client, requests := range map[string]int{
"198.51.100.9/32": 2, "198.51.100.9/32": 2,
+6 -18
View File
@@ -156,28 +156,16 @@ type Request struct {
BlockedByCoreRuleSet bool BlockedByCoreRuleSet bool
} }
// Params are what New needs. // New returns a Limiter for limits, with no client counted yet, whose
type Params struct { // table holds at most maxClients clients (SWW_WAF_MAX_TRACKED_CLIENTS). Past
// Limits are what each client's requests and bytes are counted against. // it, the least recently seen client is dropped, with its history, and
Limits Limits // starts afresh if it comes back.
// MaxClients is the most clients the table holds, func New(limits Limits, maxClients int) *Limiter {
// SWW_WAF_MAX_TRACKED_CLIENTS. Past it, the least recently seen client clients, err := simplelru.NewLRU[netip.Prefix, *Client](maxClients, nil)
// is dropped, with its history, and starts afresh if it comes back.
MaxClients int
}
// New returns a Limiter with no client counted yet.
func New(params Params) *Limiter {
clients, err := simplelru.NewLRU[netip.Prefix, *Client](
params.MaxClients,
nil,
)
if err != nil { if err != nil {
panic(err) // NewLRU fails only for a size below one panic(err) // NewLRU fails only for a size below one
} }
limits := params.Limits
return &Limiter{ return &Limiter{
windows: [3]window{ windows: [3]window{
{ {
+39 -63
View File
@@ -33,10 +33,10 @@ func TestOverARateLimitSaysWhatTheNextRequestWouldDoAndCountsNothing(
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
now := midnight() now := midnight()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerMinute: limit, PerDay: limit + 1}, ratelimit.Limits{PerMinute: limit, PerDay: limit + 1},
MaxClients: tableSize, tableSize,
}) )
if limiter.OverARateLimit(client, now) { if limiter.OverARateLimit(client, now) {
t.Error("a client never seen is over a rate limit") t.Error("a client never seen is over a rate limit")
@@ -72,7 +72,7 @@ func TestOverARateLimitSaysWhatTheNextRequestWouldDoAndCountsNothing(
wantCount(t, limiter, client, now, minute) wantCount(t, limiter, client, now, minute)
// A limit that is off is never gone over. // A limit that is off is never gone over.
off := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) off := ratelimit.New(ratelimit.Limits{}, tableSize)
off.Count(client, now, whole) off.Count(client, now, whole)
if off.OverARateLimit(client, now) { if off.OverARateLimit(client, now) {
@@ -95,10 +95,7 @@ func TestEachWindowRefusesAtItsLimitAndLetsTheClientBack(t *testing.T) {
t.Run(tc.window, func(t *testing.T) { t.Run(tc.window, func(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(tc.limits, tableSize)
Limits: tc.limits,
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
quarter := tc.length / 4 quarter := tc.length / 4
@@ -129,10 +126,10 @@ func TestEachWindowRefusesAtItsLimitAndLetsTheClientBack(t *testing.T) {
func TestHitGivesTheLimitAndTheRequestsCounted(t *testing.T) { func TestHitGivesTheLimitAndTheRequestsCounted(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerMinute: limit, PerHour: limit}, ratelimit.Limits{PerMinute: limit, PerHour: limit},
MaxClients: tableSize, tableSize,
}) )
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -162,13 +159,10 @@ func TestHitGivesTheLimitAndTheRequestsCounted(t *testing.T) {
func TestClientGetsItsPercentageOfEachLimitRoundedDown(t *testing.T) { func TestClientGetsItsPercentageOfEachLimitRoundedDown(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{ ratelimit.Limits{PerMinute: 5, BytesPerDay: math.MaxInt64},
PerMinute: 5, tableSize,
BytesPerDay: math.MaxInt64, )
},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -209,10 +203,10 @@ func TestZeroPercentIsAZeroAllowanceAndALimitOffStaysOff(t *testing.T) {
t.Parallel() t.Parallel()
// Only the hour has limits: the minute's and the day's are off. // Only the hour has limits: the minute's and the day's are off.
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerHour: limit, BytesPerHour: 1000}, ratelimit.Limits{PerHour: limit, BytesPerHour: 1000},
MaxClients: tableSize, tableSize,
}) )
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -259,10 +253,7 @@ func TestEachByteLimitIsBrokenByTheBytesCounted(t *testing.T) {
t.Run(tc.window, func(t *testing.T) { t.Run(tc.window, func(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(tc.limits, tableSize)
Limits: tc.limits,
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
// 600 bytes are within the limit, 600 more over it. // 600 bytes are within the limit, 600 more over it.
@@ -296,10 +287,10 @@ func TestEachByteLimitIsBrokenByTheBytesCounted(t *testing.T) {
func TestALimitIsBrokenOnlyByWhatIsAddedToIt(t *testing.T) { func TestALimitIsBrokenOnlyByWhatIsAddedToIt(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerMinute: 2, BytesPerMinute: 1000}, ratelimit.Limits{PerMinute: 2, BytesPerMinute: 1000},
MaxClients: tableSize, tableSize,
}) )
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
other := netip.MustParsePrefix("203.0.113.10/32") other := netip.MustParsePrefix("203.0.113.10/32")
start := midnight() start := midnight()
@@ -323,7 +314,7 @@ func TestALimitIsBrokenOnlyByWhatIsAddedToIt(t *testing.T) {
func TestCountGivesTheBytesInEachWindow(t *testing.T) { func TestCountGivesTheBytesInEachWindow(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -349,10 +340,7 @@ func TestCountGivesTheBytesInEachWindow(t *testing.T) {
func TestResetSetsTheBytesBackToZero(t *testing.T) { func TestResetSetsTheBytesBackToZero(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{BytesPerDay: 1000}, tableSize)
Limits: ratelimit.Limits{BytesPerDay: 1000},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -368,7 +356,7 @@ func TestRefusalsOverTheLimitInAMinuteBreakTheRefusalLimit(
) { ) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -423,7 +411,7 @@ func TestRefusalsOverTheLimitInAMinuteBreakTheRefusalLimit(
func TestCountGivesTheRequestsInEachWindow(t *testing.T) { func TestCountGivesTheRequestsInEachWindow(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -450,10 +438,10 @@ func TestCountGivesTheRequestsInEachWindow(t *testing.T) {
func TestResetSetsTheCountsBackToZero(t *testing.T) { func TestResetSetsTheCountsBackToZero(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerMinute: limit, PerDay: limit}, ratelimit.Limits{PerMinute: limit, PerDay: limit},
MaxClients: tableSize, tableSize,
}) )
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -475,10 +463,7 @@ func TestResetSetsTheCountsBackToZero(t *testing.T) {
func TestClientBackAfterAWholeBucketIsWithinTheLimitAtOnce(t *testing.T) { func TestClientBackAfterAWholeBucketIsWithinTheLimitAtOnce(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{PerHour: limit}, tableSize)
Limits: ratelimit.Limits{PerHour: limit},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -497,10 +482,10 @@ func TestClientBackAfterAWholeBucketIsWithinTheLimitAtOnce(t *testing.T) {
func TestRefusedRequestsCount(t *testing.T) { func TestRefusedRequestsCount(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(
Limits: ratelimit.Limits{PerMinute: limit, PerHour: 2 * limit}, ratelimit.Limits{PerMinute: limit, PerHour: 2 * limit},
MaxClients: tableSize, tableSize,
}) )
refused := netip.MustParsePrefix("203.0.113.9/32") refused := netip.MustParsePrefix("203.0.113.9/32")
within := netip.MustParsePrefix("203.0.113.10/32") within := netip.MustParsePrefix("203.0.113.10/32")
start := midnight() start := midnight()
@@ -533,10 +518,7 @@ func TestRefusedRequestsCount(t *testing.T) {
func TestRequestCountedLateGoesInTheBucketUnderWay(t *testing.T) { func TestRequestCountedLateGoesInTheBucketUnderWay(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{PerMinute: limit}, tableSize)
Limits: ratelimit.Limits{PerMinute: limit},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -552,10 +534,7 @@ func TestRequestCountedLateGoesInTheBucketUnderWay(t *testing.T) {
func TestClockSetBackStartsTheBucketsAfresh(t *testing.T) { func TestClockSetBackStartsTheBucketsAfresh(t *testing.T) {
t.Parallel() t.Parallel()
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{PerHour: limit}, tableSize)
Limits: ratelimit.Limits{PerHour: limit},
MaxClients: tableSize,
})
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
@@ -583,10 +562,7 @@ func TestKeepsAtMostMaxClientsDroppingTheLeastRecentlySeen(t *testing.T) {
const maxClients = 3 const maxClients = 3
limiter := ratelimit.New(ratelimit.Params{ limiter := ratelimit.New(ratelimit.Limits{PerMinute: 1}, maxClients)
Limits: ratelimit.Limits{PerMinute: 1},
MaxClients: maxClients,
})
now := midnight() now := midnight()
clients := make([]netip.Prefix, maxClients+1) clients := make([]netip.Prefix, maxClients+1)
+6 -12
View File
@@ -19,7 +19,7 @@ func TestSnapshotListsTheClientsByAddress(t *testing.T) {
"2001:db8::/64", "2001:db8::/64",
} }
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
for _, i := range []int{2, 3, 0, 1} { for _, i := range []int{2, 3, 0, 1} {
limiter.Count(netip.MustParsePrefix(want[i]), midnight(), whole) limiter.Count(netip.MustParsePrefix(want[i]), midnight(), whole)
} }
@@ -52,10 +52,7 @@ func TestLoadedCountsCarryOn(t *testing.T) {
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
before := ratelimit.New(ratelimit.Params{ before := ratelimit.New(ratelimit.Limits{PerHour: limit}, tableSize)
Limits: ratelimit.Limits{PerHour: limit},
MaxClients: tableSize,
})
for range limit { for range limit {
wantCount(t, before, client, start, "") wantCount(t, before, client, start, "")
} }
@@ -63,10 +60,7 @@ func TestLoadedCountsCarryOn(t *testing.T) {
// Loaded into a new limiter, as across a restart, the client has no // Loaded into a new limiter, as across a restart, the client has no
// fresh allowance. // fresh allowance.
later := start.Add(time.Minute) later := start.Add(time.Minute)
after := ratelimit.New(ratelimit.Params{ after := ratelimit.New(ratelimit.Limits{PerHour: limit}, tableSize)
Limits: ratelimit.Limits{PerHour: limit},
MaxClients: tableSize,
})
after.Load(before.Snapshot(), later) after.Load(before.Snapshot(), later)
wantCount(t, after, client, later, hour) wantCount(t, after, client, later, hour)
} }
@@ -77,7 +71,7 @@ func TestLoadEmptiesBucketsWhoseTimeHasPassed(t *testing.T) {
client := netip.MustParsePrefix("203.0.113.9/32") client := netip.MustParsePrefix("203.0.113.9/32")
start := midnight() start := midnight()
limiter := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) limiter := ratelimit.New(ratelimit.Limits{}, tableSize)
limiter.Count(client, start, whole) limiter.Count(client, start, whole)
limiter.CountBytes(client, start, 5, whole) limiter.CountBytes(client, start, 5, whole)
limiter.CountRefusal(client, start, limit) limiter.CountRefusal(client, start, limit)
@@ -86,7 +80,7 @@ func TestLoadEmptiesBucketsWhoseTimeHasPassed(t *testing.T) {
loaded := func(now time.Time) ratelimit.Client { loaded := func(now time.Time) ratelimit.Client {
t.Helper() t.Helper()
after := ratelimit.New(ratelimit.Params{MaxClients: tableSize}) after := ratelimit.New(ratelimit.Limits{}, tableSize)
after.Load(limiter.Snapshot(), now) after.Load(limiter.Snapshot(), now)
return after.Snapshot()[0] return after.Snapshot()[0]
@@ -148,7 +142,7 @@ func TestLoadDropsTheLeastRecentlySeenFirst(t *testing.T) {
addr = addr.Next() addr = addr.Next()
} }
limiter := ratelimit.New(ratelimit.Params{MaxClients: maxClients}) limiter := ratelimit.New(ratelimit.Limits{}, maxClients)
limiter.Load(clients, midnight()) limiter.Load(clients, midnight())
got := limiter.Snapshot() got := limiter.Snapshot()
+16 -48
View File
@@ -110,12 +110,8 @@ type AbuseIPDB struct {
// scores are by client. Each is added as it is fetched and never moved // scores are by client. Each is added as it is fetched and never moved
// up, so that the one fetched longest ago is the first dropped. // up, so that the one fetched longest ago is the first dropped.
scores *simplelru.LRU[netip.Prefix, Score] scores *simplelru.LRU[netip.Prefix, Score]
// checking are the clients whose check is under way, each with the // checking are the clients whose check is under way.
// function that ends it. stopped is true once StopChecking has been checking map[netip.Prefix]bool
// called, and checkGoroutines waits for the goroutine of each check.
checking map[netip.Prefix]context.CancelFunc
stopped bool
checkGoroutines sync.WaitGroup
// day is the day, in UTC, of the checks spent counts. // day is the day, in UTC, of the checks spent counts.
day civil.Date day civil.Date
spent int spent int
@@ -138,7 +134,7 @@ func NewAbuseIPDB(params AbuseIPDBParams) *AbuseIPDB {
params: params, params: params,
httpClient: &http.Client{}, httpClient: &http.Client{},
scores: scores, scores: scores,
checking: map[netip.Prefix]context.CancelFunc{}, checking: map[netip.Prefix]bool{},
} }
} }
@@ -148,11 +144,11 @@ func NewAbuseIPDB(params AbuseIPDBParams) *AbuseIPDB {
// addresses its request comes from. A client without one is checked in // addresses its request comes from. A client without one is checked in
// the background, by addr, the address its request came from, if // the background, by addr, the address its request came from, if
// offender, if it has committed an offence, unless its check is under // offender, if it has committed an offence, unless its check is under
// way, a check failed less than failureDelay ago, the day's checks have // way, a check failed less than failureDelay ago, or the day's checks
// used up DailyBudget, or StopChecking has been called; Hit never waits // have used up DailyBudget; Hit never waits for a check. The check that
// for a check. The check that uses the budget up is logged and raised as a // uses the budget up is logged and raised as a source_failure alert. ctx
// source_failure alert. ctx is the context of the client's request, and a // is the context of the client's request, and a check goes on after the
// check goes on after the request ends, until StopChecking. // request ends.
func (a *AbuseIPDB) Hit( func (a *AbuseIPDB) Hit(
ctx context.Context, client netip.Prefix, addr netip.Addr, offender bool, ctx context.Context, client netip.Prefix, addr netip.Addr, offender bool,
) (int64, bool) { ) (int64, bool) {
@@ -171,21 +167,14 @@ func (a *AbuseIPDB) Hit(
a.day, a.spent = today, 0 a.day, a.spent = today, 0
} }
_, checking := a.checking[client] check := offender && !a.checking[client] && !now.Before(a.retryAt) &&
a.spent < a.params.DailyBudget
check := offender && !checking && !a.stopped &&
!now.Before(a.retryAt) && a.spent < a.params.DailyBudget
if check { if check {
checkCtx, end := context.WithCancel(context.WithoutCancel(ctx)) a.checking[client] = true
a.checking[client] = end
a.checks++ a.checks++
a.spent++ a.spent++
a.checkGoroutines.Go(func() { go a.check(context.WithoutCancel(ctx), client, addr)
defer end()
a.check(checkCtx, client, addr)
})
} }
usedUp := check && a.spent == a.params.DailyBudget usedUp := check && a.spent == a.params.DailyBudget
@@ -200,24 +189,6 @@ func (a *AbuseIPDB) Hit(
return 0, false return 0, false
} }
// StopChecking ends the checks under way, and returns once their goroutines
// have. A check it ends gives no score and is no failure: it is neither
// counted, logged nor raised as an alert, and checks are not left alone
// after it. The ended check stays spent from the day's budget. After
// StopChecking, Hit checks no client.
func (a *AbuseIPDB) StopChecking() {
a.mu.Lock()
a.stopped = true
for _, end := range a.checking {
end()
}
a.mu.Unlock()
a.checkGoroutines.Wait()
}
// Checked returns how many checks were made. // Checked returns how many checks were made.
func (a *AbuseIPDB) Checked() int { func (a *AbuseIPDB) Checked() int {
a.mu.Lock() a.mu.Lock()
@@ -344,8 +315,7 @@ func (a *AbuseIPDB) RunBlacklist(ctx context.Context) {
// check checks client with AbuseIPDB by addr, one of its addresses, keeps // check checks client with AbuseIPDB by addr, one of its addresses, keeps
// the score as client's, and notes the check as no longer under way. A // the score as client's, and notes the check as no longer under way. A
// check that fails gives no score: it is counted, logged and raised as a // check that fails gives no score: it is counted, logged and raised as a
// source_failure alert, and no client is checked for failureDelay. A check // source_failure alert, and no client is checked for failureDelay.
// ended as ctx ends, by StopChecking, is no failure.
func (a *AbuseIPDB) check( func (a *AbuseIPDB) check(
ctx context.Context, ctx context.Context,
client netip.Prefix, client netip.Prefix,
@@ -353,26 +323,24 @@ func (a *AbuseIPDB) check(
) { ) {
score, err := a.ask(ctx, addr) score, err := a.ask(ctx, addr)
now := a.params.Now() now := a.params.Now()
isFailure := err != nil && ctx.Err() == nil
a.mu.Lock() a.mu.Lock()
delete(a.checking, client) delete(a.checking, client)
switch { if err == nil {
case err == nil:
a.scores.Add( a.scores.Add(
client, client,
Score{Client: client, Score: score, Fetched: now}, Score{Client: client, Score: score, Fetched: now},
) )
case isFailure: } else {
a.failures++ a.failures++
a.retryAt = now.Add(failureDelay) a.retryAt = now.Add(failureDelay)
} }
a.mu.Unlock() a.mu.Unlock()
if isFailure { if err != nil {
a.alert("checking a client with AbuseIPDB failed", err) a.alert("checking a client with AbuseIPDB failed", err)
} }
} }
-37
View File
@@ -394,43 +394,6 @@ func TestCheckNotAnsweredWithinTheTimeoutFailsAndHitNeverWaits(
}) })
} }
func TestStopCheckingEndsTheCheckUnderWayAsNoFailureAndChecksNoMore(
t *testing.T,
) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
queue := newQueue()
p := abuseIPDBParams()
p.Alerts = queue
abuseIPDB := &abuseIPDBStandIn{hanging: true}
checker := newAbuseIPDB(abuseIPDB, p)
wantScore(t, checker, suspect, true, 0, false)
synctest.Wait()
// The check is ended, not waited out, and is no failure.
began := time.Now()
checker.StopChecking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopChecking returned after %s, want at once", waited)
}
wantFailures(t, checker, 0)
if got := waiting(queue); len(got) != 0 {
t.Errorf("alerts waiting %+v, want none", got)
}
// An offender without a score is then not checked.
wantScore(t, checker, other, true, 0, false)
synctest.Wait()
wantChecked(t, abuseIPDB, suspect)
})
}
func TestKeyIsSentInTheKeyHeaderAndNeverShown(t *testing.T) { func TestKeyIsSentInTheKeyHeaderAndNeverShown(t *testing.T) {
t.Parallel() t.Parallel()
+13 -44
View File
@@ -82,12 +82,8 @@ type DNSBL struct {
// verdicts are by query. Each is added as it is fetched and never moved // verdicts are by query. Each is added as it is fetched and never moved
// up, so that the one fetched longest ago is the first dropped. // up, so that the one fetched longest ago is the first dropped.
verdicts *simplelru.LRU[query, Verdict] verdicts *simplelru.LRU[query, Verdict]
// asking are the queries under way, each with the function that ends // asking are the queries under way.
// it. stopped is true once StopAsking has been called, and asking map[query]bool
// queryGoroutines waits for the goroutine of each query.
asking map[query]context.CancelFunc
stopped bool
queryGoroutines sync.WaitGroup
// queries and failures count, by zone, the queries made and those that // queries and failures count, by zone, the queries made and those that
// failed, and retryAt is when a zone whose last query failed may be // failed, and retryAt is when a zone whose last query failed may be
// asked again. // asked again.
@@ -124,7 +120,7 @@ func NewDNSBL(params DNSBLParams) *DNSBL {
params: params, params: params,
resolver: resolver, resolver: resolver,
verdicts: verdicts, verdicts: verdicts,
asking: map[query]context.CancelFunc{}, asking: map[query]bool{},
queries: map[string]int{}, queries: map[string]int{},
failures: map[string]int{}, failures: map[string]int{},
retryAt: map[string]time.Time{}, retryAt: map[string]time.Time{},
@@ -142,10 +138,9 @@ func (d *DNSBL) Zones() []string {
// log, the alerts and the metrics. A verdict is used until CacheTTL has // log, the alerts and the metrics. A verdict is used until CacheTTL has
// passed since it was fetched. Each zone without one is asked about addr // passed since it was fetched. Each zone without one is asked about addr
// in the background, unless a query about addr to it is under way, the // in the background, unless a query about addr to it is under way, the
// zone is left alone after a failure, maxQueries are under way, or // zone is left alone after a failure, or maxQueries are under way;
// StopAsking has been called; ListedBy never waits for a query. ctx is the // ListedBy never waits for a query. ctx is the context of the client's
// context of the client's request, and a query goes on after the request // request, and a query goes on after the request ends.
// ends, until StopAsking.
func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string { func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string {
d.mu.Lock() d.mu.Lock()
defer d.mu.Unlock() defer d.mu.Unlock()
@@ -158,47 +153,23 @@ func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string {
q := query{zone: zone, client: addr} q := query{zone: zone, client: addr}
kept, found := d.verdicts.Peek(q) kept, found := d.verdicts.Peek(q)
_, asking := d.asking[q]
switch { switch {
case found && now.Sub(kept.Fetched) < d.params.CacheTTL: case found && now.Sub(kept.Fetched) < d.params.CacheTTL:
if kept.Listed { if kept.Listed {
listedBy = append(listedBy, config.MaskZoneKey(zone)) listedBy = append(listedBy, config.MaskZoneKey(zone))
} }
case !asking && !d.stopped && !now.Before(d.retryAt[zone]) && case !d.asking[q] && !now.Before(d.retryAt[zone]) && len(d.asking) < maxQueries:
len(d.asking) < maxQueries: d.asking[q] = true
queryCtx, end := context.WithCancel(context.WithoutCancel(ctx))
d.asking[q] = end
d.queries[zone]++ d.queries[zone]++
d.queryGoroutines.Go(func() { go d.ask(context.WithoutCancel(ctx), q)
defer end()
d.ask(queryCtx, q)
})
} }
} }
return listedBy return listedBy
} }
// StopAsking ends the queries under way, and returns once their
// goroutines have. A query it ends gives no verdict and is no failure: it
// is neither counted, logged nor raised as an alert, and the zone is not
// left alone after it. After StopAsking, ListedBy asks no zone.
func (d *DNSBL) StopAsking() {
d.mu.Lock()
d.stopped = true
for _, end := range d.asking {
end()
}
d.mu.Unlock()
d.queryGoroutines.Wait()
}
// Queries returns how many queries were made to zone. // Queries returns how many queries were made to zone.
func (d *DNSBL) Queries(zone string) int { func (d *DNSBL) Queries(zone string) int {
d.mu.Lock() d.mu.Lock()
@@ -267,29 +238,27 @@ func (d *DNSBL) Load(verdicts []Verdict) {
// query as no longer under way. A query that fails gives no verdict: it // query as no longer under way. A query that fails gives no verdict: it
// is counted, logged and raised as a source_failure alert, which show the // is counted, logged and raised as a source_failure alert, which show the
// zone with its key masked, and the zone is not asked again for // zone with its key masked, and the zone is not asked again for
// failureDelay. A query ended as ctx ends, by StopAsking, is no failure. // failureDelay.
func (d *DNSBL) ask(ctx context.Context, q query) { func (d *DNSBL) ask(ctx context.Context, q query) {
listed, err := d.lookUp(ctx, q) listed, err := d.lookUp(ctx, q)
now := d.params.Now() now := d.params.Now()
isFailure := err != nil && ctx.Err() == nil
d.mu.Lock() d.mu.Lock()
delete(d.asking, q) delete(d.asking, q)
switch { if err == nil {
case err == nil:
d.verdicts.Add(q, Verdict{ d.verdicts.Add(q, Verdict{
Zone: q.zone, Client: q.client, Listed: listed, Fetched: now, Zone: q.zone, Client: q.client, Listed: listed, Fetched: now,
}) })
case isFailure: } else {
d.failures[q.zone]++ d.failures[q.zone]++
d.retryAt[q.zone] = now.Add(failureDelay) d.retryAt[q.zone] = now.Add(failureDelay)
} }
d.mu.Unlock() d.mu.Unlock()
if isFailure { if err != nil {
const failed = "asking a DNSBL zone failed" const failed = "asking a DNSBL zone failed"
shown := config.MaskZoneKey(q.zone) shown := config.MaskZoneKey(q.zone)
-39
View File
@@ -210,45 +210,6 @@ func TestQueryNotAnsweredWithinTheTimeoutFails(t *testing.T) {
}) })
} }
//
//nolint:paralleltest // one at a time, as the comment at the top of this file says
func TestStopAskingEndsTheQueryUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
synctest.Test(t, func(t *testing.T) {
queue := newQueue()
p := dnsblParams(zone)
p.Alerts = queue
resolver := &resolverStandIn{hanging: true}
dnsbl := newDNSBL(resolver, p)
wantZones(t, dnsbl, listed)
synctest.Wait()
// The query is ended, not waited out, and is no failure.
began := time.Now()
dnsbl.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
wantQueries(t, dnsbl, 1, 0)
if got := waiting(queue); len(got) != 0 {
t.Errorf("alerts waiting %+v, want none", got)
}
// A client without a verdict is then asked about in no zone.
wantZones(t, dnsbl, unlisted)
synctest.Wait()
wantQueries(t, dnsbl, 1, 0)
wantAsked(t, resolver, listedName)
waitForTheResolver()
})
}
// //
//nolint:paralleltest // one at a time, as the comment at the top of this file says //nolint:paralleltest // one at a time, as the comment at the top of this file says
func TestZoneThatFailsOrRefusesGivesNoVerdictAndIsLeftAloneForAMinute( func TestZoneThatFailsOrRefusesGivesNoVerdictAndIsLeftAloneForAMinute(
+33 -4
View File
@@ -1,7 +1,7 @@
// Package requestlog writes the request log sww prints on stdout: JSON // Package requestlog writes the lines sww prints on stdout: one
// lines marked "type":"request", at most two from waf and a short one // JSON object per request, two from waf and a short one from rproxy,
// from rproxy for each request. Package processlog writes the process's // marked "type":"request", and the process's own messages as JSON lines marked
// own messages. // "type":"process".
package requestlog package requestlog
import ( import (
@@ -9,6 +9,7 @@ import (
"encoding/json" "encoding/json"
"fmt" "fmt"
"io" "io"
"log/slog"
"time" "time"
"sneak.berlin/go/smallwebwaf/internal/ratelimit" "sneak.berlin/go/smallwebwaf/internal/ratelimit"
@@ -299,3 +300,31 @@ func Milliseconds(d time.Duration) float64 {
time.Millisecond/time.Microsecond, time.Millisecond/time.Microsecond,
) )
} }
// NewProcessLogger returns the logger for the process's own messages:
// JSON lines on w, marked "type":"process", with the time in the same form
// as a request line's, and instanceName, SWW_WAF_INSTANCE_NAME, as instance.
// It writes only the messages at level, SWW_WAF_LOG_LEVEL, or more severe;
// the request lines Write writes are never held back.
func NewProcessLogger(
w io.Writer,
instanceName string,
level slog.Level,
) *slog.Logger {
handler := slog.NewJSONHandler(w, &slog.HandlerOptions{
Level: level,
ReplaceAttr: func(groups []string, attr slog.Attr) slog.Attr {
if attr.Key == slog.TimeKey && len(groups) == 0 {
return slog.String(
slog.TimeKey,
FormatTime(attr.Value.Time()),
)
}
return attr
},
})
return slog.New(handler).
With("type", "process", "instance", instanceName)
}
+87
View File
@@ -3,6 +3,8 @@ package requestlog_test
import ( import (
"bytes" "bytes"
"encoding/json" "encoding/json"
"log/slog"
"slices"
"strings" "strings"
"testing" "testing"
"time" "time"
@@ -132,3 +134,88 @@ func TestWriteRProxyLineWritesOneJSONLineWithOnlyItsFields(t *testing.T) {
t.Errorf("wrote %s, want %s", out.String(), want) t.Errorf("wrote %s, want %s", out.String(), want)
} }
} }
func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
t.Parallel()
var out bytes.Buffer
requestlog.NewProcessLogger(&out, "host1/blog", slog.LevelInfo).
Info("starting",
"version", "v1")
var fields map[string]any
err := json.Unmarshal(out.Bytes(), &fields)
if err != nil {
t.Fatalf("decode %q: %v", out.String(), err)
}
if fields["type"] != "process" ||
fields["instance"] != "host1/blog" ||
fields["msg"] != "starting" ||
fields["level"] != "INFO" ||
fields["version"] != "v1" {
t.Errorf("process line %v", fields)
}
timeText, _ := fields["time"].(string)
logged, err := time.Parse(time.RFC3339, timeText)
if err != nil || !strings.HasSuffix(timeText, "Z") ||
len(timeText) != len("2006-01-02T15:04:05.000Z") ||
time.Since(logged) > time.Minute {
t.Errorf(
"process line time %q, want now in UTC with milliseconds",
timeText,
)
}
}
func TestProcessLoggerWritesTheMessagesAtItsLevelOrMoreSevere(t *testing.T) {
t.Parallel()
levels := []slog.Level{
slog.LevelDebug, slog.LevelInfo, slog.LevelWarn, slog.LevelError,
}
for i, level := range levels {
t.Run(level.String(), func(t *testing.T) {
t.Parallel()
var out bytes.Buffer
processLog := requestlog.NewProcessLogger(
&out,
"host1/blog",
level,
)
for _, at := range levels {
processLog.Log(t.Context(), at, "message")
}
var got, want []string
for line := range strings.Lines(out.String()) {
var fields struct {
Level string `json:"level"`
}
err := json.Unmarshal([]byte(line), &fields)
if err != nil {
t.Fatalf("decode %q: %v", line, err)
}
got = append(got, fields.Level)
}
for _, written := range levels[i:] {
want = append(want, written.String())
}
if !slices.Equal(got, want) {
t.Errorf("lines at %v, want %v", got, want)
}
})
}
}
+12 -43
View File
@@ -99,12 +99,8 @@ type Client struct {
// answers are by client. Each is added as it comes and never moved up, // answers are by client. Each is added as it comes and never moved up,
// so that the one that came longest ago is the first dropped. // so that the one that came longest ago is the first dropped.
answers *simplelru.LRU[netip.Prefix, Answer] answers *simplelru.LRU[netip.Prefix, Answer]
// asking are the clients whose query is under way, each with the // asking are the clients whose query is under way.
// function that ends it. stopped is true once StopAsking has been asking map[netip.Prefix]bool
// called, and queryGoroutines waits for the goroutine of each query.
asking map[netip.Prefix]context.CancelFunc
stopped bool
queryGoroutines sync.WaitGroup
// retryAt is when routewatch may be asked again after a query failed. // retryAt is when routewatch may be asked again after a query failed.
retryAt time.Time retryAt time.Time
} }
@@ -120,7 +116,7 @@ func New(params Params) *Client {
params: params, params: params,
httpClient: &http.Client{}, httpClient: &http.Client{},
answers: answers, answers: answers,
asking: map[netip.Prefix]context.CancelFunc{}, asking: map[netip.Prefix]bool{},
} }
} }
@@ -128,9 +124,8 @@ func New(params Params) *Client {
// IPv6 group, or why it has no route. It never waits for a query. A client // IPv6 group, or why it has no route. It never waits for a query. A client
// without an answer is asked about in the background, by addr, the address its // without an answer is asked about in the background, by addr, the address its
// request came from, unless its query is under way, a query failed less than // request came from, unless its query is under way, a query failed less than
// failureKept ago, maxQueries are under way, or StopAsking has been called. ctx // failureKept ago, or maxQueries are under way. ctx is the context of the
// is the context of the client's request, and a query goes on after the request // client's request, and a query goes on after the request ends.
// ends, until StopAsking.
func (c *Client) Route( func (c *Client) Route(
ctx context.Context, client netip.Prefix, addr netip.Addr, ctx context.Context, client netip.Prefix, addr netip.Addr,
) (Route, Missing) { ) (Route, Missing) {
@@ -152,38 +147,15 @@ func (c *Client) Route(
return Route{}, RequestFailed return Route{}, RequestFailed
} }
_, asking := c.asking[client] if !c.asking[client] && len(c.asking) < maxQueries {
if !asking && !c.stopped && len(c.asking) < maxQueries { c.asking[client] = true
queryCtx, end := context.WithCancel(context.WithoutCancel(ctx))
c.asking[client] = end
c.queryGoroutines.Go(func() { go c.ask(context.WithoutCancel(ctx), client, addr)
defer end()
c.ask(queryCtx, client, addr)
})
} }
return Route{}, NoAnswerYet return Route{}, NoAnswerYet
} }
// StopAsking ends the queries under way, and returns once their goroutines
// have. A query it ends gives no answer and is no failure: it is not logged,
// and routewatch is not left alone after it. After StopAsking, Route asks
// routewatch nothing.
func (c *Client) StopAsking() {
c.mu.Lock()
c.stopped = true
for _, end := range c.asking {
end()
}
c.mu.Unlock()
c.queryGoroutines.Wait()
}
// Snapshot returns every answer still in use, sorted by client, as // Snapshot returns every answer still in use, sorted by client, as
// routewatch.json lists them. // routewatch.json lists them.
func (c *Client) Snapshot() []Answer { func (c *Client) Snapshot() []Answer {
@@ -233,8 +205,7 @@ func (c *Client) Load(answers []Answer) {
// ask asks routewatch about addr, keeps the answer as client's, and notes the // ask asks routewatch about addr, keeps the answer as client's, and notes the
// query as no longer under way. A query that fails gives no answer, and // query as no longer under way. A query that fails gives no answer, and
// routewatch is not asked again for failureKept. Only the first failure of // routewatch is not asked again for failureKept. Only the first failure of
// those under way is logged. A query ended as ctx ends, by StopAsking, is no // those under way is logged.
// failure.
func (c *Client) ask( func (c *Client) ask(
ctx context.Context, ctx context.Context,
client netip.Prefix, client netip.Prefix,
@@ -242,20 +213,18 @@ func (c *Client) ask(
) { ) {
route, err := c.query(ctx, addr) route, err := c.query(ctx, addr)
now := c.params.Now() now := c.params.Now()
isFailure := err != nil && ctx.Err() == nil
c.mu.Lock() c.mu.Lock()
delete(c.asking, client) delete(c.asking, client)
firstFailure := isFailure && !now.Before(c.retryAt) firstFailure := err != nil && !now.Before(c.retryAt)
switch { if err == nil {
case err == nil:
c.answers.Add(client, Answer{ c.answers.Add(client, Answer{
Client: client, Netblock: route.Netblock, ASN: route.ASN, Answered: now, Client: client, Netblock: route.Netblock, ASN: route.ASN, Answered: now,
}) })
case isFailure: } else {
c.retryAt = now.Add(failureKept) c.retryAt = now.Add(failureKept)
} }
-48
View File
@@ -361,54 +361,6 @@ func TestHangingRoutewatchNeverDelaysAndFailsTheQuery(t *testing.T) {
}) })
} }
func TestStopAskingEndsTheQueryUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
t.Parallel()
// In a synctest bubble, as TestHangingRoutewatchNeverDelaysAndFailsTheQuery
// says.
synctest.Test(t, func(t *testing.T) {
f := &fixture{t: t, log: &syncBuffer{}}
f.client = routewatch.New(routewatch.Params{
URL: silentURL, Now: time.Now,
ProcessLog: slog.New(slog.NewTextHandler(f.log, nil)),
})
f.route()
synctest.Wait()
// The query is ended, not waited out.
began := time.Now()
f.client.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
// A query started now would fail within waitLimit. None is, and the
// one ended is no failure: nothing is logged, and routewatch is not
// left alone.
for range 2 {
if _, missing := f.route(); missing != routewatch.NoAnswerYet {
t.Errorf(
"Route gave %q, want %q",
missing,
routewatch.NoAnswerYet,
)
}
time.Sleep(waitLimit)
synctest.Wait()
}
if f.log.String() != "" {
t.Errorf("process log %q, want nothing", f.log.String())
}
})
}
func TestRepeatedRequestsMakeOneQueryAndTheAnswerExpires(t *testing.T) { func TestRepeatedRequestsMakeOneQueryAndTheAnswerExpires(t *testing.T) {
t.Parallel() t.Parallel()
+6 -6
View File
@@ -18,7 +18,7 @@ import (
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest" "sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/processlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rproxy" "sneak.berlin/go/smallwebwaf/internal/rproxy"
"sneak.berlin/go/smallwebwaf/internal/waf" "sneak.berlin/go/smallwebwaf/internal/waf"
) )
@@ -51,11 +51,11 @@ func TestServerHasTheFixedLimits(t *testing.T) {
server := rproxy.New(rproxy.Params{ server := rproxy.New(rproxy.Params{
Config: cfg, Config: cfg,
RequestLog: io.Discard, RequestLog: io.Discard,
ProcessLog: processlog.New(processlog.Params{ ProcessLog: requestlog.NewProcessLogger(
Output: io.Discard, io.Discard,
InstanceName: "test", "test",
Level: slog.LevelInfo, slog.LevelInfo,
}), ),
}) })
if server.Addr != ":8080" || server.MaxHeaderBytes != 28<<10 || if server.Addr != ":8080" || server.MaxHeaderBytes != 28<<10 ||
+7 -9
View File
@@ -21,7 +21,7 @@ import (
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest" "sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/processlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rproxy" "sneak.berlin/go/smallwebwaf/internal/rproxy"
"sneak.berlin/go/smallwebwaf/internal/waf" "sneak.berlin/go/smallwebwaf/internal/waf"
) )
@@ -324,8 +324,7 @@ func greet(w http.ResponseWriter, r *http.Request) {
// startRProxy starts rproxy with waf at backend and the app at appURL, and // startRProxy starts rproxy with waf at backend and the app at appURL, and
// the settings in env on top of the defaults. It returns where rproxy listens // the settings in env on top of the defaults. It returns where rproxy listens
// and what it writes. SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS is a minute unless env // and what it writes.
// sets it, so that a busy host cannot make rproxy drop a question or a report.
func startRProxy( func startRProxy(
t *testing.T, backend, appURL string, env map[string]string, t *testing.T, backend, appURL string, env map[string]string,
) (string, *output) { ) (string, *output) {
@@ -358,7 +357,6 @@ func startServerLogging(
settings := map[string]string{ settings := map[string]string{
"SWW_RPROXY_WAF_BACKEND": backend, "SWW_RPROXY_UPSTREAM_URL": appURL, "SWW_RPROXY_WAF_BACKEND": backend, "SWW_RPROXY_UPSTREAM_URL": appURL,
wafBackendTimeout: "60000",
} }
maps.Copy(settings, env) maps.Copy(settings, env)
@@ -370,11 +368,11 @@ func startServerLogging(
server := rproxy.New(rproxy.Params{ server := rproxy.New(rproxy.Params{
Config: cfg, Config: cfg,
RequestLog: requestLog, RequestLog: requestLog,
ProcessLog: processlog.New(processlog.Params{ ProcessLog: requestlog.NewProcessLogger(
Output: processLog, processLog,
InstanceName: "test", "test",
Level: slog.LevelInfo, slog.LevelInfo,
}), ),
}) })
listener, err := (&net.ListenConfig{}).Listen( listener, err := (&net.ListenConfig{}).Listen(
+1 -1
View File
@@ -2448,7 +2448,7 @@ func newParams(dir string) state.Params {
AttackBanDuration: 7 * 24 * time.Hour, AttackBanDuration: 7 * 24 * time.Hour,
MaxBans: 5000, MaxBans: 5000,
}), }),
Limiter: ratelimit.New(ratelimit.Params{MaxClients: 20000}), Limiter: ratelimit.New(ratelimit.Limits{}, 20000),
GeoJS: geojs.New(geojs.Params{Now: midnight}), GeoJS: geojs.New(geojs.Params{Now: midnight}),
Lists: reputation.New(reputation.Params{ Lists: reputation.New(reputation.Params{
BlocklistURLs: []string{ BlocklistURLs: []string{
-198
View File
@@ -1,198 +0,0 @@
package sww
import (
"context"
"errors"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"go.uber.org/fx/fxevent"
)
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// requestLog is where a daemon's server writes the request log: stdout, and
// the remote log sender while there is one. fx tells parts apart by type, so
// it has a type of its own.
type requestLog struct {
io.Writer
}
// servingFailed gets why serving failed, for run, which then stops the
// daemon. fx tells parts apart by type, so it has a type of its own.
type servingFailed chan error
// utcNow is the time the state files, the alerts and the rate limits go by.
func utcNow() time.Time {
return time.Now().UTC()
}
// startError is why a daemon cannot start: the message its process log gives,
// and the error it logs with it.
type startError struct {
message string
err error
}
func (e startError) Error() string {
return e.message + ": " + e.err.Error()
}
func (e startError) Unwrap() error {
return e.err
}
// cannotStart logs why a daemon cannot start, with the message of the
// startError in err, and returns its exit status.
func cannotStart(processLog *slog.Logger, err error) int {
message, cause := "cannot start", err
failed, ok := errors.AsType[startError](err)
if ok {
message, cause = failed.message, failed.err
}
processLog.Error(message, "error", cause.Error())
return 1
}
// listen listens on address, which the setting names.
func listen(address, setting string) (net.Listener, error) {
listener, err := (&net.ListenConfig{}).Listen(
context.Background(), "tcp", address)
if err != nil {
return nil, startError{"cannot listen on " + setting, err}
}
return listener, nil
}
// background returns the hook that runs loop on a goroutine of its own from
// the start, and at the stop ends it and waits for it to return.
func background(loop func(context.Context)) fx.Hook {
running, stop := context.WithCancel(context.Background())
ended := make(chan struct{})
return fx.StartStopHook(
func() {
go func() {
loop(running)
close(ended)
}()
},
func() {
stop()
<-ended
},
)
}
// serve serves requests on listener from the start. At the stop it gives the
// requests in progress shutdownTimeout to finish, then closes their
// connections. When serving fails, it logs why and sends the error to
// failed.
func serve(
lc fx.Lifecycle, server *http.Server, listener net.Listener,
processLog *slog.Logger, failed servingFailed,
) {
served := make(chan error, 1)
lc.Append(fx.Hook{
OnStart: func(context.Context) error {
go func() {
err := server.Serve(listener)
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
failed <- err
}
served <- err
}()
return nil
},
OnStop: func(ctx context.Context) error {
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(ctx, shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
return err
}
return nil
},
})
}
// run starts app, which serves until ctx is done or serving fails, as
// failed tells. Then it stops app and takes the daemon's last step. It
// returns the process's exit status, 1 when serving failed, a part could
// not stop in order or the last step failed; each logs why.
func run(
ctx context.Context, app *fx.App, failed servingFailed,
processLog *slog.Logger, lastStep func() error,
) int {
// The hooks only start goroutines, and end them at the stop, so neither
// is cut short by a deadline or by ctx.
err := app.Start(context.WithoutCancel(ctx))
if err != nil {
return cannotStart(processLog, err)
}
status := 0
select {
case <-ctx.Done():
case <-failed:
status = 1
}
err = app.Stop(context.WithoutCancel(ctx))
if err != nil {
status = 1
}
err = lastStep()
if err != nil {
status = 1
}
if status == 0 {
processLog.Info("stopped")
}
return status
}
// fxEventLogger returns what fx.WithLogger takes to write fx's own events to
// processLog at debug, which the daemons' log levels normally hold back. Its
// errors are at debug too: the daemon logs each one itself.
func fxEventLogger(processLog *slog.Logger) func() fxevent.Logger {
return func() fxevent.Logger {
logger := &fxevent.SlogLogger{Logger: processLog}
logger.UseLogLevel(slog.LevelDebug)
logger.UseErrorLevel(slog.LevelDebug)
return logger
}
}
+68 -47
View File
@@ -2,15 +2,14 @@ package sww
import ( import (
"context" "context"
"errors"
"log/slog" "log/slog"
"net" "net"
"net/http" "net/http"
"os" "os"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/processlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rproxy" "sneak.berlin/go/smallwebwaf/internal/rproxy"
) )
@@ -23,39 +22,34 @@ import (
// setting for either. // setting for either.
func RunRProxy(ctx context.Context, params Params) int { func RunRProxy(ctx context.Context, params Params) int {
hostname, _ := os.Hostname() // "" when the host has no name to give hostname, _ := os.Hostname() // "" when the host has no name to give
processLog := processlog.New(processlog.Params{ processLog := requestlog.NewProcessLogger(
Output: params.Stdout, params.Stdout,
InstanceName: hostname, hostname,
Level: slog.LevelInfo, slog.LevelInfo,
}) )
cfg, err := config.RProxyFromEnvironment(params.Viper) cfg, err := config.RProxyFromEnvironment(params.Viper)
if err != nil { if err != nil {
return cannotStart(processLog, startError{"invalid setting", err}) processLog.Error("invalid setting", "error", err.Error())
return 1
} }
var ( server := rproxy.New(rproxy.Params{
server *rproxy.Server Config: cfg,
listener net.Listener RequestLog: params.Stdout,
) ProcessLog: processLog,
})
failed := make(servingFailed, 1) listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
app := fx.New(
fx.Supply(cfg, processLog, requestLog{params.Stdout}, failed),
fx.Provide(
newRProxyServer,
func(server *rproxy.Server) *http.Server { return server.Server },
newRProxyListener,
),
fx.Invoke(serve),
fx.Populate(&server, &listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
if err != nil { if err != nil {
return cannotStart(processLog, err) processLog.Error(
"cannot listen on SWW_RPROXY_LISTEN_ADDR",
"error",
err.Error(),
)
return 1
} }
processLog.Info("starting", processLog.Info("starting",
@@ -63,25 +57,52 @@ func RunRProxy(ctx context.Context, params Params) int {
"address", listener.Addr().String(), "address", listener.Addr().String(),
"settings", cfg) "settings", cfg)
return run(ctx, app, failed, processLog, func() error { return serveRProxy(ctx, server, listener, processLog)
server.WaitForReports()
return nil
})
} }
// newRProxyServer returns the server rproxy runs. // serveRProxy serves requests on listener until ctx is done, and then stops as
func newRProxyServer( // RunRProxy says.
cfg *config.RProxy, out requestLog, processLog *slog.Logger, func serveRProxy(
) *rproxy.Server { ctx context.Context, server *rproxy.Server, listener net.Listener,
return rproxy.New(rproxy.Params{ processLog *slog.Logger,
Config: cfg, ) int {
RequestLog: out, served := make(chan error, 1)
ProcessLog: processLog,
})
}
// newRProxyListener listens on SWW_RPROXY_LISTEN_ADDR. go func() {
func newRProxyListener(cfg *config.RProxy) (net.Listener, error) { served <- server.Serve(listener)
return listen(cfg.ListenAddr, "SWW_RPROXY_LISTEN_ADDR") }()
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
server.WaitForReports()
processLog.Info("stopped")
return 0
} }
+2 -5
View File
@@ -552,9 +552,7 @@ func TestAStatusWAFDoesNotTakeIsReportedAs599(t *testing.T) {
// startRProxyProcess runs `sww rproxy` in a process of its own, with the // startRProxyProcess runs `sww rproxy` in a process of its own, with the
// settings in env, each as NAME=value. It returns where rproxy listens and a // settings in env, each as NAME=value. It returns where rproxy listens and a
// function that sends rproxy SIGTERM and fails the test unless it exits with // function that sends rproxy SIGTERM and fails the test unless it exits with
// status 0 within waitLimit. It waits a minute for waf's answers unless env // status 0 within waitLimit.
// sets SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, so that a busy host cannot make it
// drop a question.
func startRProxyProcess(t *testing.T, env ...string) (string, func()) { func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
t.Helper() t.Helper()
@@ -570,8 +568,7 @@ func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
cmd.Env = append(os.Environ(), cmd.Env = append(os.Environ(),
commandForMain+"=rproxy", commandForMain+"=rproxy",
"SWW_RPROXY_LISTEN_ADDR="+localhost+":0", "SWW_RPROXY_LISTEN_ADDR="+localhost+":0")
wafBackendTimeout+"=60000")
cmd.Env = append(cmd.Env, env...) cmd.Env = append(cmd.Env, env...)
exited := startProcess(t, cmd) exited := startProcess(t, cmd)
+403 -2
View File
@@ -4,14 +4,17 @@
// stop, and then stops in an orderly way, writing the state and cache files. // stop, and then stops in an orderly way, writing the state and cache files.
// `sww rproxy` reads rproxy's settings alone, and runs the reverse proxy in // `sww rproxy` reads rproxy's settings alone, and runs the reverse proxy in
// front of one app that asks waf about each request. `sww healthcheck` is the // front of one app that asks waf about each request. `sww healthcheck` is the
// container's health check. fx builds the parts of each daemon, starts their // container's health check.
// background work and stops it.
package sww package sww
import ( import (
"context" "context"
"errors"
"fmt" "fmt"
"io" "io"
"log/slog"
"net"
"net/http"
"os" "os"
"os/signal" "os/signal"
"syscall" "syscall"
@@ -19,9 +22,29 @@ import (
"github.com/spf13/viper" "github.com/spf13/viper"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
) )
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// usageStatus is the exit status with no command, or one sww does not // usageStatus is the exit status with no command, or one sww does not
// know. // know.
const usageStatus = 2 const usageStatus = 2
@@ -87,3 +110,381 @@ func printUsage(w io.Writer) int {
return usageStatus return usageStatus
} }
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. It returns the process's exit status, 1 when waf cannot start.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := requestlog.NewProcessLogger(params.Stdout,
config.InstanceName(params.Viper), slog.LevelError)
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, "invalid setting", err)
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = requestlog.NewProcessLogger(
stdout,
cfg.InstanceName,
cfg.LogLevel,
)
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
return runWAFWithSettings(
ctx,
params,
cfg,
stdout,
remote,
processLog,
)
}
// runWAFWithSettings is the rest of RunWAF once the settings are read and
// the process log goes where they say. remote is nil unless
// SWW_WAF_LOG_REMOTE_URL is set.
func runWAFWithSettings(
ctx context.Context,
params Params,
cfg *config.WAF,
stdout io.Writer,
remote *remotelog.Sender,
processLog *slog.Logger,
) int {
// The state files and the alerts give times in UTC.
now := func() time.Time { return time.Now().UTC() }
alertQueue := newAlertQueue(cfg, now, processLog)
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return cannotStart(processLog, "cannot use the rule files", err)
}
crs, err := waf.NewCoreRuleSet(cfg)
if err != nil {
return cannotStart(processLog, "cannot use the Core Rule Set", err)
}
server, err := newServer(
cfg,
stdout,
processLog,
now,
ruleFiles,
alertQueue,
crs,
params.BesideLookupTimeLimit,
)
if err != nil {
return cannotStart(processLog, "cannot use the lookup database", err)
}
if remote != nil {
server.Metrics.AddRemoteLog(remote)
}
files, err := loadStateFiles(cfg, server, alertQueue, now, processLog)
if err != nil {
return cannotStart(
processLog,
"cannot use the state and cache files",
err,
)
}
listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
if err != nil {
return cannotStart(
processLog,
"cannot listen on SWW_WAF_LISTEN_ADDR",
err,
)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
return serve(
ctx,
server,
listener,
files,
ruleFiles,
alertQueue,
processLog,
)
}
// cannotStart logs why waf cannot start, and returns its exit status.
func cannotStart(processLog *slog.Logger, message string, err error) int {
processLog.Error(message, "error", err.Error())
return 1
}
// newServer returns the server waf runs, with the metrics of the alerts,
// after reading the lookup database while SWW_WAF_LOOKUP_SOURCE is file. A lookup
// database that cannot be read is an error.
func newServer(
cfg *config.WAF, stdout io.Writer, processLog *slog.Logger,
now func() time.Time, ruleFiles *rules.Files, alertQueue *alerts.Queue,
crs *coreruleset.CoreRuleSet, besideLookupTimeLimit time.Duration,
) (*waf.Server, error) {
var lookupFile *lookup.File
if cfg.LookupSource == "file" {
var err error
lookupFile, err = lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, err
}
}
server := waf.New(waf.Params{
Config: cfg,
RequestLog: stdout,
ProcessLog: processLog,
GeoJSURL: geojs.URL,
AbuseIPDBURL: reputation.AbuseIPDBURL,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: besideLookupTimeLimit,
AbuseIPDBBlacklistURL: reputation.AbuseIPDBBlacklistURL,
})
server.Metrics.AddAlerts(alertQueue)
if lookupFile != nil {
server.Metrics.AddLookupFile(
lookupFile.LastRead,
lookupFile.ReadFailures,
)
}
return server, nil
}
// loadStateFiles reads the state and cache files into the parts of server and
// into alertQueue, as state.Load does.
func loadStateFiles(
cfg *config.WAF, server *waf.Server, alertQueue *alerts.Queue,
now func() time.Time, processLog *slog.Logger,
) (*state.Files, error) {
return state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: server.Ledger,
Limiter: server.Limiter,
GeoJS: server.GeoJS,
Lists: server.Lists,
DNSBL: server.DNSBL,
AbuseIPDB: server.AbuseIPDB,
RouteWatch: server.RouteWatch,
Alerts: alertQueue,
Anomalies: server.Anomalies,
Now: now,
ProcessLog: processLog,
Metrics: server.Metrics,
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them.
func newAlertQueue(
cfg *config.WAF, now func() time.Time, processLog *slog.Logger,
) *alerts.Queue {
return alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: now,
ProcessLog: processLog,
})
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
// serve serves requests on listener, writes the state and cache files as they
// are due, takes in an admin's edits of them, reads the rule files again as
// they change, and the lookup database when it is replaced, fetches the
// lists the settings name by URL as they are due, bans the clients on
// AbuseIPDB's blacklist as it is fetched, and sends the alerts,
// until ctx is done. Then it gives the requests in progress
// shutdownTimeout to finish, and writes every state and cache file,
// alerts.json with the alerts still waiting.
func serve(
ctx context.Context, server *waf.Server, listener net.Listener,
files *state.Files, ruleFiles *rules.Files, alertQueue *alerts.Queue,
processLog *slog.Logger,
) int {
served := make(chan error, 1)
go func() {
served <- server.Serve(listener)
}()
writing, stopWriting := context.WithCancel(ctx)
defer stopWriting()
written := inBackground(func() { files.Run(writing) })
watched := inBackground(func() { files.Watch(writing) })
rulesWatched := inBackground(func() { ruleFiles.Watch(writing) })
lookupFileWatched := inBackground(func() {
if server.LookupFile != nil {
server.LookupFile.Watch(writing)
}
})
listsFetched := inBackground(func() { server.Lists.Run(writing) })
blacklistFetched := inBackground(func() {
server.AbuseIPDB.RunBlacklist(writing)
})
alertsSent := inBackground(func() { alertQueue.Run(writing) })
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
// Run and Watch have ended, so nothing else reads or writes the
// files, and no alert is being sent, so that alerts.json keeps every
// alert not yet sent. Every request has ended too, but for one cut off
// because Shutdown timed out, which adds to its client's history only as
// it ends. That can be after this write, and then that request is missing
// from clients.json.
<-written
<-watched
<-rulesWatched
<-lookupFileWatched
<-listsFetched
<-blacklistFetched
<-alertsSent
err = files.WriteAll()
if err != nil {
processLog.Error(
"writing the state and cache files failed",
"error",
err.Error(),
)
return 1
}
processLog.Info("stopped")
return 0
}
// inBackground runs task on a goroutine of its own, and returns a channel
// that is closed once task has returned.
func inBackground(task func()) <-chan struct{} {
done := make(chan struct{})
go func() {
task()
close(done)
}()
return done
}
+1 -3
View File
@@ -660,9 +660,7 @@ func TestCoreRuleSetExclusionsFileThatCannotBeUsedStopsTheStartWhileTheCoreRuleS
status := run(t.Context(), map[string]string{ status := run(t.Context(), map[string]string{
listenAddr: localhost + ":0", stateDir: t.TempDir(), ruleFilesDir: t.TempDir(), listenAddr: localhost + ":0", stateDir: t.TempDir(), ruleFilesDir: t.TempDir(),
"SWW_WAF_CORE_RULE_SET_MODE": string( "SWW_WAF_CORE_RULE_SET_MODE": config.CoreRuleSetModeOff,
config.CoreRuleSetModeOff,
),
"SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE": path, "SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE": path,
}, out) }, out)
if status != 1 { if status != 1 {
-560
View File
@@ -1,560 +0,0 @@
package sww
import (
"context"
"fmt"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/processlog"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. Then it gives the requests in progress shutdownTimeout to
// finish, ends its background work and writes every state and cache file,
// alerts.json with the alerts still waiting. It returns the process's exit
// status, 1 when waf cannot start or stop in order.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := processlog.New(processlog.Params{
Output: params.Stdout,
InstanceName: config.InstanceName(params.Viper),
Level: slog.LevelError,
})
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, startError{"invalid setting", err})
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too. The sender runs before any part is built, so that it
// sends why waf cannot start.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = processlog.New(processlog.Params{
Output: stdout,
InstanceName: cfg.InstanceName,
Level: cfg.LogLevel,
})
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
var (
files *state.Files
listener net.Listener
)
failed := make(servingFailed, 1)
app := fx.New(
fx.Supply(
params,
cfg,
processLog,
requestLog{stdout},
remote,
failed,
),
fx.Provide(
newAlertQueue, newRuleFiles, newCoreRuleSet, newLookupFile,
newLimiter, newLedger, newAnomalyCounters,
newLists, newDNSBL, newAbuseIPDB, newRouteWatch,
newMetrics, newGeoJS, newWAFServer,
func(server *waf.Server) *http.Server { return server.Server },
newWAFListener, newStateFiles,
),
// fx stops hooks in the reverse of the order they were added in. The
// state files are read before serving is set up, so that serving
// stops before their loops do.
fx.Populate(&files),
fx.Invoke(serve),
fx.Populate(&listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
if err != nil {
return cannotStart(processLog, err)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
// The last write follows the stop of every hook, and so the end of every
// loop that changes the state or raises an alert, and of every ask of
// GeoJS, the DNSBL zones, AbuseIPDB and routewatch. A hook of the state
// files would stop before the loops of the parts built ahead of them.
return run(ctx, app, failed, processLog, func() error {
err := files.WriteAll()
if err != nil {
processLog.Error("writing the state and cache files failed",
"error", err.Error())
}
return err
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them. Until waf stops, it sends them.
func newAlertQueue(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
) *alerts.Queue {
alertQueue := alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: utcNow,
ProcessLog: processLog,
})
lc.Append(background(alertQueue.Run))
return alertQueue
}
// newRuleFiles reads the rule files, and reads them again as they change
// until waf stops.
func newRuleFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*rules.Files, error) {
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the rule files", err}
}
lc.Append(background(ruleFiles.Watch))
return ruleFiles, nil
}
// newCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
// without the rules SWW_WAF_CORE_RULE_SET_DISABLED_RULES switches off, reading bodies
// up to SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE, with the exclusions in
// SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE and the fixes of the apps in SWW_WAF_APPS,
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. An exclusions file that
// coreruleset.New refuses is an error in every mode. While the mode is off, a
// set file is loaded with the Core Rule Set only to check it.
func newCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff &&
cfg.CoreRuleSetExclusionsFile == "" {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
crs, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil {
return nil, startError{
"cannot use the Core Rule Set",
fmt.Errorf("SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE: %w", err),
}
}
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
return crs, nil
}
// newLookupFile reads the lookup database while SWW_WAF_LOOKUP_SOURCE is
// file, and reads it again when it is replaced until waf stops. It returns
// nil while the source is anything else.
func newLookupFile(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*lookup.File, error) {
if cfg.LookupSource != config.LookupSourceFile {
return nil, nil //nolint:nilnil // no lookup database, and no error
}
lookupFile, err := lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the lookup database", err}
}
lc.Append(background(lookupFile.Watch))
return lookupFile, nil
}
// newLimiter returns the table of clients, with the rate and byte limits.
func newLimiter(cfg *config.WAF) *ratelimit.Limiter {
return ratelimit.New(ratelimit.Params{
Limits: ratelimit.Limits{
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
},
MaxClients: cfg.MaxTrackedClients,
})
}
// newLedger returns the ledger of the bans, with the settings for them.
func newLedger(cfg *config.WAF) *bans.Ledger {
return bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
}
// newAnomalyCounters returns the counters of the anomaly thresholds.
func newAnomalyCounters(
cfg *config.WAF, alertQueue *alerts.Queue,
) *anomaly.Counters {
return anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: alertQueue,
})
}
// newLists returns the lists the settings name by URL, none fetched yet.
// Until waf stops, it fetches them as they are due.
func newLists(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) *reputation.Lists {
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(lists.Run))
return lists
}
// newDNSBL returns what asks the DNSBL zones, none asked yet. At the stop it
// ends the queries under way, as reputation.DNSBL.StopAsking says.
func newDNSBL(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) *reputation.DNSBL {
dnsbl := reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(fx.StopHook(dnsbl.StopAsking))
return dnsbl
}
// newAbuseIPDB returns what checks clients with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, none checked yet. Until waf stops, it
// fetches AbuseIPDB's blacklist as it is due, and bans the clients on it in
// ledger, as waf.BanAbuseIPDBBlacklist says. At the stop it ends the checks
// under way, as reputation.AbuseIPDB.StopChecking says.
func newAbuseIPDB(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue, ledger *bans.Ledger,
) *reputation.AbuseIPDB {
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: reputation.AbuseIPDBURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: reputation.AbuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, utcNow(), listed,
)
},
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(abuseIPDB.RunBlacklist))
lc.Append(fx.StopHook(abuseIPDB.StopChecking))
return abuseIPDB
}
// newRouteWatch returns what asks routewatch about clients, or nil while
// SWW_WAF_ROUTEWATCH_URL is unset. At the stop it ends the queries under
// way, as routewatch.Client.StopAsking says.
func newRouteWatch(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
) *routewatch.Client {
if cfg.RouteWatchURL == "" {
return nil
}
routeWatch := routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: utcNow,
ProcessLog: processLog,
})
lc.Append(fx.StopHook(routeWatch.StopAsking))
return routeWatch
}
// newMetrics returns the metrics, with those read from the other parts as
// the metrics are asked for: AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set,
// the lookup database's while there is one, and the remote log sender's
// while there is one.
func newMetrics(
cfg *config.WAF, ledger *bans.Ledger, limiter *ratelimit.Limiter,
ruleFiles *rules.Files, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
alertQueue *alerts.Queue, lookupFile *lookup.File,
remote *remotelog.Sender,
) *metrics.Metrics {
m := metrics.New(cfg.MetricsBusiestCountriesAndASNs, cfg.InstanceName)
m.AddBansAndClients(ledger, limiter, utcNow)
m.AddRules(ruleFiles)
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
m.AddAlerts(alertQueue)
if lookupFile != nil {
m.AddLookupFile(lookupFile.LastRead, lookupFile.ReadFailures)
}
if remote != nil {
m.AddRemoteLog(remote)
}
return m
}
// newGeoJS returns what looks clients up at GeoJS, none looked up yet. Each
// answer goes to the limiter and the ledger, as waf.AddLookup says, and each
// failure is handled as waf.GeoJSFailed says. At the stop it ends the request
// under way, as geojs.GeoJS.StopAsking says.
func newGeoJS(
lc fx.Lifecycle,
cfg *config.WAF,
m *metrics.Metrics,
limiter *ratelimit.Limiter,
ledger *bans.Ledger,
alertQueue *alerts.Queue,
processLog *slog.Logger,
) *geojs.GeoJS {
geoJS := geojs.New(geojs.Params{
URL: geojs.URL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: utcNow,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
lc.Append(fx.StopHook(geoJS.StopAsking))
return geoJS
}
// newWAFServer returns the server waf runs, with its parts and the time
// limit params gives.
func newWAFServer(
params Params, cfg *config.WAF, out requestLog, processLog *slog.Logger,
m *metrics.Metrics, limiter *ratelimit.Limiter, ledger *bans.Ledger,
anomalies *anomaly.Counters, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
routeWatch *routewatch.Client, geoJS *geojs.GeoJS,
lookupFile *lookup.File, crs *coreruleset.CoreRuleSet,
ruleFiles *rules.Files, alertQueue *alerts.Queue,
) *waf.Server {
return waf.New(waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
Metrics: m,
Limiter: limiter,
Ledger: ledger,
Anomalies: anomalies,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
GeoJS: geoJS,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: utcNow,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: params.BesideLookupTimeLimit,
})
}
// newWAFListener listens on SWW_WAF_LISTEN_ADDR.
func newWAFListener(cfg *config.WAF) (net.Listener, error) {
return listen(cfg.ListenAddr, "SWW_WAF_LISTEN_ADDR")
}
// newStateFiles reads the state and cache files into the parts and the
// alert queue, as state.Load does. Until waf stops, it writes them as they
// are due and takes in an admin's edits of them.
func newStateFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
m *metrics.Metrics, ledger *bans.Ledger, limiter *ratelimit.Limiter,
geoJS *geojs.GeoJS, lists *reputation.Lists, dnsbl *reputation.DNSBL,
abuseIPDB *reputation.AbuseIPDB, routeWatch *routewatch.Client,
alertQueue *alerts.Queue, anomalies *anomaly.Counters,
) (*state.Files, error) {
files, err := state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: ledger,
Limiter: limiter,
GeoJS: geoJS,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
Alerts: alertQueue,
Anomalies: anomalies,
Now: utcNow,
ProcessLog: processLog,
Metrics: m,
})
if err != nil {
return nil, startError{"cannot use the state and cache files", err}
}
lc.Append(background(files.Run))
lc.Append(background(files.Watch))
return files, nil
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
+1 -4
View File
@@ -90,8 +90,6 @@ func TestMainRunsWAF(t *testing.T) {
cmd := exec.CommandContext(t.Context(), binary) cmd := exec.CommandContext(t.Context(), binary)
cmd.Stdout = out cmd.Stdout = out
// The Core Rule Set is off. Main keeps waf's own limit for its checks,
// and on a busy host the Core Rule Set's inspection can pass it.
cmd.Env = append(os.Environ(), cmd.Env = append(os.Environ(),
"TZ="+zone, "TZ="+zone,
commandForMain+"="+wafCommand, commandForMain+"="+wafCommand,
@@ -99,8 +97,7 @@ func TestMainRunsWAF(t *testing.T) {
stateDir+"="+dir, stateDir+"="+dir,
cacheDir+"="+dir, cacheDir+"="+dir,
ruleFilesDir+"="+t.TempDir(), ruleFilesDir+"="+t.TempDir(),
lookupSource+"=off", lookupSource+"=off")
"SWW_WAF_CORE_RULE_SET_MODE=off")
exited := startProcess(t, cmd) exited := startProcess(t, cmd)
+2 -2
View File
@@ -35,7 +35,7 @@ func (abuseIPDB) check(
return nil return nil
} }
client := clientGroup(rq.h.config, rq.client) client := rq.h.clientGroup(rq.client)
held, _ := rq.h.limiter.Client(client) held, _ := rq.h.limiter.Client(client)
offender := held.History.Offences != ratelimit.Offences{} offender := held.History.Offences != ratelimit.Offences{}
@@ -54,7 +54,7 @@ func (abuseIPDB) check(
"scored by AbuseIPDB at or over SWW_WAF_ABUSEIPDB_MIN_SCORE", "scored by AbuseIPDB at or over SWW_WAF_ABUSEIPDB_MIN_SCORE",
) )
if rq.h.config.DNSBLAbuseIPDBAction != config.ReputationActionDeny { if rq.h.config.DNSBLAbuseIPDBAction != deny {
return nil return nil
} }
+12 -19
View File
@@ -4,41 +4,34 @@ package waf
// SWW_WAF_MODE; the blacklist is fetched by the reputation package. // SWW_WAF_MODE; the blacklist is fetched by the reputation package.
import ( import (
"log/slog"
"net/netip" "net/netip"
"time"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/reputation" "sneak.berlin/go/smallwebwaf/internal/reputation"
) )
// BanAbuseIPDBBlacklist bans in ledger the netblock of each client on // banAbuseIPDBBlacklist bans the netblock of each client on AbuseIPDB's
// AbuseIPDB's blacklist, listed, for SWW_WAF_ABUSEIPDB_BAN_DAYS from now, as // blacklist, listed, for SWW_WAF_ABUSEIPDB_BAN_DAYS, as the ledger's
// the ledger's BanForAbuseIPDB describes. It logs to processLog how many // BanForAbuseIPDB describes, and logs how many clients were listed and how
// clients were listed and how many bans were made. Clients in one netblock // many bans were made. Clients in one netblock make one ban, with the
// make one ban, with the highest of their scores. In observe mode it makes // highest of their scores. In observe mode it makes no ban.
// no ban. func (h *handler) banAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) {
func BanAbuseIPDBBlacklist(
cfg *config.WAF, ledger *bans.Ledger, processLog *slog.Logger,
now time.Time, listed []reputation.BlacklistEntry,
) {
scores := make(map[netip.Prefix]int64, len(listed)) scores := make(map[netip.Prefix]int64, len(listed))
for _, client := range listed { for _, client := range listed {
netblock := banNetblock(cfg, client.Addr) netblock := h.netblock(client.Addr)
scores[netblock] = max(scores[netblock], client.Score) scores[netblock] = max(scores[netblock], client.Score)
} }
made := 0 made := 0
if !cfg.Observe { if !h.config.Observe {
made = ledger.BanForAbuseIPDB( now := h.now()
now, now.Add(cfg.AbuseIPDBBanDuration), scores, made = h.ledger.BanForAbuseIPDB(
now, now.Add(h.config.AbuseIPDBBanDuration), scores,
) )
} }
processLog.Info( h.processLog.Info(
"fetched AbuseIPDB's blacklist", "fetched AbuseIPDB's blacklist",
"clients", len(listed), "clients", len(listed),
"bans_made", made, "bans_made", made,
+5 -5
View File
@@ -139,7 +139,7 @@ func (rq *request) addBan() {
) )
if err == nil { if err == nil {
netblock, err = rq.h.parseBanNetblock(toAdd.Netblock) netblock, err = rq.h.banNetblock(toAdd.Netblock)
} }
if err == nil { if err == nil {
@@ -190,12 +190,12 @@ func (rq *request) readBanToAdd() (banToAdd, error) {
return toAdd, nil return toAdd, nil
} }
// parseBanNetblock reads value, a netblock such as 203.0.113.0/24, or a // banNetblock reads value, a netblock such as 203.0.113.0/24, or a
// client's address, which stands for the netblock a ban on that client // client's address, which stands for the netblock a ban on that client
// covers. An IPv4-mapped netblock, such as ::ffff:203.0.113.0/120, is // covers. An IPv4-mapped netblock, such as ::ffff:203.0.113.0/120, is
// refused, since a client's address is looked up as IPv4 and a ban on it // refused, since a client's address is looked up as IPv4 and a ban on it
// would refuse nothing, and so is a value with a zone. // would refuse nothing, and so is a value with a zone.
func (h *handler) parseBanNetblock(value string) (netip.Prefix, error) { func (h *handler) banNetblock(value string) (netip.Prefix, error) {
netblock, err := netip.ParsePrefix(value) netblock, err := netip.ParsePrefix(value)
if err == nil { if err == nil {
if netblock.Addr().Is4In6() { if netblock.Addr().Is4In6() {
@@ -224,7 +224,7 @@ func (h *handler) parseBanNetblock(value string) (netip.Prefix, error) {
return netip.Prefix{}, fmt.Errorf("netblock %q %w", value, errZone) return netip.Prefix{}, fmt.Errorf("netblock %q %w", value, errZone)
} }
return banNetblock(h.config, addr), nil return h.netblock(addr), nil
} }
// expiry returns when a ban made at now for duration ends: duration // expiry returns when a ban made at now for duration ends: duration
@@ -295,7 +295,7 @@ func (rq *request) showClient() {
Bans: state.BanEntries(rq.h.ledger.Covering(addr)), Bans: state.BanEntries(rq.h.ledger.Covering(addr)),
} }
client, seen := rq.h.limiter.Client(clientGroup(rq.h.config, addr)) client, seen := rq.h.limiter.Client(rq.h.clientGroup(addr))
if seen { if seen {
answer.Client = &client answer.Client = &client
} }
+12 -7
View File
@@ -877,13 +877,18 @@ func TestWAFAnswersWithinTheTimeLimitWhileEveryOutsideSourceHangs(
held, _, _ := startHeldGeoJS(t) held, _, _ := startHeldGeoJS(t)
resolver, releaseResolver := startHeldResolver(t) resolver, releaseResolver := startHeldResolver(t)
server, out, _ := newWAFWith(t, waf.New, server, out, _ := newWAFWith(t, func(
silentGeoJSURL, silentAbuseIPDBURL, time.Now, map[string]string{ params waf.Params,
tagDeny: "country=KP", coreRuleSetMode: block, ) *waf.Server {
dnsblZones: dnsblZone, dnsblResolver: resolver, params.AbuseIPDBURL = silentAbuseIPDBURL
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt", return waf.New(params)
}) }, silentGeoJSURL, time.Now, map[string]string{
tagDeny: "country=KP", coreRuleSetMode: block,
dnsblZones: dnsblZone, dnsblResolver: resolver,
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt",
})
// The lists are fetched outside the synctest bubble below: a wait on the // The lists are fetched outside the synctest bubble below: a wait on the
// network inside it would keep its clock from moving on. // network inside it would keep its clock from moving on.
+11 -13
View File
@@ -10,7 +10,6 @@ import (
"sneak.berlin/go/smallwebwaf/internal/alerts" "sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans" "sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/ratelimit" "sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/requestlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
) )
@@ -86,14 +85,13 @@ func (rq *request) countedBytes() int64 {
response, request := rq.out.bytes, rq.requestBytes response, request := rq.out.bytes, rq.requestBytes
switch rq.h.config.BytesCounted { switch rq.h.config.BytesCounted {
case config.BytesCountedResponse: case "response":
return response return response
case config.BytesCountedRequest: case "request":
return request return request
case config.BytesCountedBoth: default: // both
return response + request
} }
return response + request
} }
// banForLimit bans the client's netblock at now for a broken limit, the // banForLimit bans the client's netblock at now for a broken limit, the
@@ -123,7 +121,7 @@ func (rq *request) banForLimit(
rq.line.Offence = requestlog.OffenceLimit rq.line.Offence = requestlog.OffenceLimit
rq.h.metrics.LimitHit(hit) rq.h.metrics.LimitHit(hit)
netblock := banNetblock(rq.h.config, rq.client) netblock := rq.h.netblock(rq.client)
if rq.h.config.Observe && if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseLimit) { !rq.wouldAlertBan(netblock, now, bans.CauseLimit) {
return return
@@ -159,7 +157,7 @@ func (rq *request) banForLimit(
} }
ban, made := rq.h.ledger.BanForLimit(netblock, now, notes) ban, made := rq.h.ledger.BanForLimit(netblock, now, notes)
rq.h.limiter.Reset(clientGroup(rq.h.config, rq.client)) rq.h.limiter.Reset(rq.h.clientGroup(rq.client))
rq.line.BanExpires = banExpires(ban) rq.line.BanExpires = banExpires(ban)
if made { if made {
@@ -173,7 +171,7 @@ func (rq *request) banForLimit(
// no ban, and raises the alert for the ban it would have made, if that // no ban, and raises the alert for the ban it would have made, if that
// alert would be sent. It returns the action for that ban. // alert would be sent. It returns the action for that ban.
func (rq *request) banForAttack(now time.Time, notes bans.Notes) string { func (rq *request) banForAttack(now time.Time, notes bans.Notes) string {
netblock := banNetblock(rq.h.config, rq.client) netblock := rq.h.netblock(rq.client)
if rq.h.config.Observe && if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseAttack) { !rq.wouldAlertBan(netblock, now, bans.CauseAttack) {
return banAction( return banAction(
@@ -275,16 +273,16 @@ func (rq *request) netblockRequests(netblock netip.Prefix) int64 {
return rq.h.limiter.Requests(netblock) + 1 return rq.h.limiter.Requests(netblock) + 1
} }
// banNetblock is the netblock a ban on client covers: its IPv4 address, // netblock is the netblock a ban on client covers: its IPv4 address,
// widened to SWW_WAF_BAN_SCOPE_V4_PREFIX, or the IPv6 group clientGroup // widened to SWW_WAF_BAN_SCOPE_V4_PREFIX, or the IPv6 group clientGroup
// counts it in. // counts it in.
func banNetblock(cfg *config.WAF, client netip.Addr) netip.Prefix { func (h *handler) netblock(client netip.Addr) netip.Prefix {
addr := client.Unmap() addr := client.Unmap()
if addr.Is4() { if addr.Is4() {
return netip.PrefixFrom(addr, cfg.BanScopeV4Prefix).Masked() return netip.PrefixFrom(addr, h.config.BanScopeV4Prefix).Masked()
} }
return clientGroup(cfg, addr) return h.clientGroup(addr)
} }
// banExpires is when ban ends, as the log line gives it: a time, or // banExpires is when ban ends, as the log line gives it: a time, or
+1 -1
View File
@@ -76,7 +76,7 @@ func newWAFHoldingTheCoreRuleSet(
params.BesideLookupTimeLimit = waf.BesideLookupTimeLimit params.BesideLookupTimeLimit = waf.BesideLookupTimeLimit
return waf.New(params) return waf.New(params)
}, silentGeoJSURL, abuseIPDBURL, time.Now, settings) }, silentGeoJSURL, time.Now, settings)
return server, out, queue return server, out, queue
} }
+2 -3
View File
@@ -63,8 +63,7 @@ func (rq *request) limitPercentages() (percentage, percentage) {
} }
blocklisted := percentage{percent: whole} blocklisted := percentage{percent: whole}
if rq.blocklisted && if rq.blocklisted && cfg.BlocklistAction == "limit" {
cfg.BlocklistAction == config.ReputationActionLimit {
blocklisted = percentage{ blocklisted = percentage{
cfg.BlocklistLimitPercent, cfg.BlocklistLimitPercent,
"SWW_WAF_BLOCKLIST_ACTION", "SWW_WAF_BLOCKLIST_ACTION",
@@ -73,7 +72,7 @@ func (rq *request) limitPercentages() (percentage, percentage) {
dnsblAbuseIPDBListed := percentage{percent: whole} dnsblAbuseIPDBListed := percentage{percent: whole}
if (rq.dnsblListed || rq.abuseIPDBHit) && if (rq.dnsblListed || rq.abuseIPDBHit) &&
cfg.DNSBLAbuseIPDBAction == config.ReputationActionLimit { cfg.DNSBLAbuseIPDBAction == "limit" {
dnsblAbuseIPDBListed = percentage{ dnsblAbuseIPDBListed = percentage{
cfg.DNSBLAbuseIPDBLimitPercent, cfg.DNSBLAbuseIPDBLimitPercent,
"SWW_WAF_DNSBL_ABUSEIPDB_ACTION", "SWW_WAF_DNSBL_ABUSEIPDB_ACTION",
+1 -3
View File
@@ -7,7 +7,6 @@ import (
"context" "context"
"time" "time"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/requestlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
) )
@@ -42,6 +41,5 @@ func (blocklists) check(
// client, given listedBy, the blocklists that list it: it does when one lists // client, given listedBy, the blocklists that list it: it does when one lists
// it and SWW_WAF_BLOCKLIST_ACTION is deny. // it and SWW_WAF_BLOCKLIST_ACTION is deny.
func (rq *request) refusedByBlocklists(listedBy []string) bool { func (rq *request) refusedByBlocklists(listedBy []string) bool {
return len(listedBy) > 0 && rq.h.config.BlocklistAction == return len(listedBy) > 0 && rq.h.config.BlocklistAction == deny
config.ReputationActionDeny
} }
+1 -1
View File
@@ -30,7 +30,7 @@ func (byteLimits) check(
} }
counts, hit, over := rq.h.limiter.CountBytes( counts, hit, over := rq.h.limiter.CountBytes(
clientGroup(rq.h.config, rq.client), rq.h.clientGroup(rq.client),
now, now,
rq.countedBytes(), rq.countedBytes(),
rq.bytesLimitPercent.percent, rq.bytesLimitPercent.percent,
+2 -4
View File
@@ -5,8 +5,6 @@ import (
"net/http" "net/http"
"net/netip" "net/netip"
"slices" "slices"
"sneak.berlin/go/smallwebwaf/internal/config"
) )
// peerAddress is the address of the request's TCP peer. // peerAddress is the address of the request's TCP peer.
@@ -47,10 +45,10 @@ func scheme(r *http.Request, isQuestion bool) string {
// address, or its IPv6 group, the netblock its IPv6 address is in of the // address, or its IPv6 group, the netblock its IPv6 address is in of the
// length SWW_WAF_IPV6_GROUP_PREFIX sets, a /64 by default, since one abuser // length SWW_WAF_IPV6_GROUP_PREFIX sets, a /64 by default, since one abuser
// usually holds a whole /64. An IPv4 address in IPv6 form counts as IPv4. // usually holds a whole /64. An IPv4 address in IPv6 form counts as IPv4.
func clientGroup(cfg *config.WAF, addr netip.Addr) netip.Prefix { func (h *handler) clientGroup(addr netip.Addr) netip.Prefix {
addr = addr.Unmap() addr = addr.Unmap()
if addr.Is6() { if addr.Is6() {
return netip.PrefixFrom(addr, cfg.IPv6GroupPrefix).Masked() return netip.PrefixFrom(addr, h.config.IPv6GroupPrefix).Masked()
} }
return netip.PrefixFrom(addr, addr.BitLen()) return netip.PrefixFrom(addr, addr.BitLen())
+3 -3
View File
@@ -47,7 +47,7 @@ func (coreRuleSet) check(
rq.line.CoreRuleSetScore = &result.Score rq.line.CoreRuleSetScore = &result.Score
for _, id := range result.RuleIDs { for _, id := range result.RuleIDs {
rq.h.metrics.CoreRuleSetMatched(string(cfg.CoreRuleSetMode), id) rq.h.metrics.CoreRuleSetMatched(cfg.CoreRuleSetMode, id)
} }
threshold := cfg.CoreRuleSetScoreThreshold threshold := cfg.CoreRuleSetScoreThreshold
@@ -99,7 +99,7 @@ func (rq *request) alertCoreRuleSetMatch(result coreruleset.Result) {
switch { switch {
case rq.h.config.CoreRuleSetMode == config.CoreRuleSetModeDetect: case rq.h.config.CoreRuleSetMode == config.CoreRuleSetModeDetect:
detail["mode"] = string(config.CoreRuleSetModeDetect) detail["mode"] = config.CoreRuleSetModeDetect
case rq.h.config.Observe: case rq.h.config.Observe:
detail["mode"] = "observe" detail["mode"] = "observe"
} }
@@ -108,7 +108,7 @@ func (rq *request) alertCoreRuleSetMatch(result coreruleset.Result) {
Event: alerts.EventCoreRuleSetMatch, Event: alerts.EventCoreRuleSetMatch,
Host: rq.site, Host: rq.site,
Client: rq.client, Client: rq.client,
Netblock: clientGroup(rq.h.config, rq.client), Netblock: rq.h.clientGroup(rq.client),
ASN: rq.line.ASN, ASN: rq.line.ASN,
ASName: rq.line.ASName, ASName: rq.line.ASName,
Country: rq.line.Country, Country: rq.line.Country,
+1 -2
View File
@@ -32,8 +32,7 @@ func (dnsbl) check(ctx context.Context, rq *request, _ time.Time) *verdict {
rq.addTag(config.DNSBLTagPrefix + strings.ToLower(zone)) rq.addTag(config.DNSBLTagPrefix + strings.ToLower(zone))
} }
if !rq.dnsblListed || if !rq.dnsblListed || rq.h.config.DNSBLAbuseIPDBAction != deny {
rq.h.config.DNSBLAbuseIPDBAction != config.ReputationActionDeny {
return nil return nil
} }
+1 -1
View File
@@ -9,5 +9,5 @@ const BesideLookupTimeLimit = besideLookupTimeLimit
// the clients on listed does. // the clients on listed does.
func (s *Server) BanAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) { func (s *Server) BanAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) {
h := s.Handler.(*handler) //nolint:forcetypeassert // New makes it one h := s.Handler.(*handler) //nolint:forcetypeassert // New makes it one
BanAbuseIPDBBlacklist(h.config, h.ledger, h.processLog, h.now(), listed) h.banAbuseIPDBBlacklist(listed)
} }
+15 -28
View File
@@ -2,18 +2,14 @@ package waf
import ( import (
"context" "context"
"log/slog"
"net/http" "net/http"
"net/netip" "net/netip"
"strings" "strings"
"time" "time"
"sneak.berlin/go/smallwebwaf/internal/alerts" "sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/geojs" "sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
) )
// The headers in which an answer of allow gives rproxy the client's AS number // The headers in which an answer of allow gives rproxy the client's AS number
@@ -49,16 +45,15 @@ func (rq *request) startLookUp(
) <-chan lookupResult { ) <-chan lookupResult {
result := make(chan lookupResult, 1) result := make(chan lookupResult, 1)
if rq.h.config.LookupSource == config.LookupSourceOff || if rq.h.config.LookupSource == "off" || !canBePlaced(rq.client) {
!canBePlaced(rq.client) {
result <- lookupResult{} result <- lookupResult{}
return result return result
} }
client := clientGroup(rq.h.config, rq.client) client := rq.h.clientGroup(rq.client)
if rq.h.config.LookupSource == config.LookupSourceFile { if rq.h.config.LookupSource == "file" {
result <- lookupResult{ result <- lookupResult{
lookedUp: true, answer: rq.h.lookupFile.LookUp(client), lookedUp: true, answer: rq.h.lookupFile.LookUp(client),
} }
@@ -133,30 +128,22 @@ func countryTag(country string) string {
return config.CountryTagPrefix + country return config.CountryTagPrefix + country
} }
// AddLookup adds answer, an answer about a client from the lookup database // addLookup adds answer, an answer about a client from the lookup
// or GeoJS, to the client's history in limiter, and to the notes of the bans // database or GeoJS, to the client's history, and to the notes of the bans
// in ledger on its netblock that have no AS number, AS name or country yet. // on its netblock that have no AS number, AS name or country yet.
// cfg sets the netblock's size. func (h *handler) addLookup(answer geojs.Answer) {
func AddLookup( h.limiter.AddLookup(answer.Client, answer.Answered,
cfg *config.WAF, limiter *ratelimit.Limiter, ledger *bans.Ledger,
answer geojs.Answer,
) {
limiter.AddLookup(answer.Client, answer.Answered,
answer.ASN, answer.ASName, answer.Country) answer.ASN, answer.ASName, answer.Country)
ledger.AddLookup(banNetblock(cfg, answer.Client.Addr()), h.ledger.AddLookup(h.netblock(answer.Client.Addr()),
answer.ASN, answer.ASName, answer.Country) answer.ASN, answer.ASName, answer.Country)
} }
// GeoJSFailed logs a failure of GeoJS to processLog, raises a // geojsFailed logs a failure of GeoJS, raises a source_failure alert for it
// source_failure alert for it on alertQueue and counts it in m. // and counts it. askingAgainIn is how long GeoJS is left alone after it.
// askingAgainIn is how long GeoJS is left alone after it. func (h *handler) geojsFailed(err error, askingAgainIn time.Duration) {
func GeoJSFailed( h.processLog.Warn("asking GeoJS failed",
processLog *slog.Logger, alertQueue *alerts.Queue, m *metrics.Metrics,
err error, askingAgainIn time.Duration,
) {
processLog.Warn("asking GeoJS failed",
"error", err.Error(), "asking_again_in", askingAgainIn.String()) "error", err.Error(), "asking_again_in", askingAgainIn.String())
alertQueue.Raise(alerts.Alert{ h.alerts.Raise(alerts.Alert{
Event: alerts.EventSourceFailure, Event: alerts.EventSourceFailure,
Reason: "asking GeoJS failed", Reason: "asking GeoJS failed",
Detail: map[string]any{ Detail: map[string]any{
@@ -164,7 +151,7 @@ func GeoJSFailed(
"asking_again_in": askingAgainIn.String(), "asking_again_in": askingAgainIn.String(),
}, },
}) })
m.GeoJSFailures.Inc() h.metrics.GeoJSFailures.Inc()
} }
// setLookupHeaders sets the headers that give the client's AS number and // setLookupHeaders sets the headers that give the client's AS number and
+163 -49
View File
@@ -6,6 +6,7 @@ package waf
import ( import (
"cmp" "cmp"
"fmt"
"io" "io"
"log/slog" "log/slog"
"net/http" "net/http"
@@ -57,33 +58,21 @@ type Params struct {
RequestLog io.Writer RequestLog io.Writer
// ProcessLog receives the process's own messages. // ProcessLog receives the process's own messages.
ProcessLog *slog.Logger ProcessLog *slog.Logger
// Metrics count what waf does. Whoever builds them adds the metrics // GeoJSURL is where clients' AS numbers and countries are looked up
// read from the other parts. // while SWW_WAF_LOOKUP_SOURCE is geojs, normally geojs.URL.
Metrics *metrics.Metrics GeoJSURL string
// Limiter is the table of clients the rate limits count, with each // AbuseIPDBURL is where clients are checked with AbuseIPDB while
// client's history. // SWW_WAF_ABUSEIPDB_KEY is set, normally reputation.AbuseIPDBURL.
Limiter *ratelimit.Limiter AbuseIPDBURL string
// Ledger holds the bans. // AbuseIPDBBlacklistURL is where AbuseIPDB's blacklist is fetched from
Ledger *bans.Ledger // while SWW_WAF_ABUSEIPDB_KEY is set, normally
// Anomalies are the counters of the anomaly thresholds. // reputation.AbuseIPDBBlacklistURL.
Anomalies *anomaly.Counters AbuseIPDBBlacklistURL string
// Lists are the lists fetched from URLs, DNSBL the DNSBL zones'
// verdicts, and AbuseIPDB AbuseIPDB's scores and the checks spent.
Lists *reputation.Lists
DNSBL *reputation.DNSBL
AbuseIPDB *reputation.AbuseIPDB
// RouteWatch asks routewatch about clients, and is nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
RouteWatch *routewatch.Client
// GeoJS looks clients' AS numbers and countries up while
// SWW_WAF_LOOKUP_SOURCE is geojs. It is given AddLookup as its Answered
// and GeoJSFailed as its Failed.
GeoJS *geojs.GeoJS
// LookupFile is the lookup database they are looked up in while // LookupFile is the lookup database they are looked up in while
// SWW_WAF_LOOKUP_SOURCE is file, and nil otherwise. // SWW_WAF_LOOKUP_SOURCE is file, and nil otherwise.
LookupFile *lookup.File LookupFile *lookup.File
// CoreRuleSet is what inspects requests while // CoreRuleSet is what NewCoreRuleSet returns: what inspects requests
// SWW_WAF_CORE_RULE_SET_MODE is not off, and nil while it is. // while SWW_WAF_CORE_RULE_SET_MODE is not off, and nil while it is.
CoreRuleSet CoreRuleSetInspector CoreRuleSet CoreRuleSetInspector
// Now tells the time by which requests are counted for the rate // Now tells the time by which requests are counted for the rate
// limits, bans are made and run out, and GeoJS's answers are kept, // limits, bans are made and run out, and GeoJS's answers are kept,
@@ -115,8 +104,11 @@ type CoreRuleSetInspector interface {
) (coreruleset.Result, []byte, error) ) (coreruleset.Result, []byte, error)
} }
// Server is the server waf runs, with the parts of its Params. The tests // Server is the server waf runs, with the parts whose state the state
// read them. // files keep, the lookup database, nil unless SWW_WAF_LOOKUP_SOURCE is file, the
// lists fetched from URLs, which its Run fetches, the DNSBL zones' verdicts,
// AbuseIPDB's scores and checks spent, routewatch's answers, and the metrics.
// RouteWatch is nil while SWW_WAF_ROUTEWATCH_URL is unset.
type Server struct { type Server struct {
*http.Server *http.Server
@@ -132,45 +124,167 @@ type Server struct {
Metrics *metrics.Metrics Metrics *metrics.Metrics
} }
// newHandler returns the handler with what every request shares, the parts // newHandler returns the handler with what every request shares, as the
// in params among it. // settings in params make it.
func newHandler(params Params) *handler { func newHandler(params Params) *handler {
m := metrics.New(
params.Config.MetricsBusiestCountriesAndASNs,
params.Config.InstanceName,
)
awaitingReport, err := lru.New[string, *decision](maxAwaitingReport) awaitingReport, err := lru.New[string, *decision](maxAwaitingReport)
if err != nil { if err != nil {
panic(err) // New fails only for a size below one panic(err) // New fails only for a size below one
} }
return &handler{ h := &handler{
config: params.Config, config: params.Config,
requestLog: params.RequestLog, requestLog: params.RequestLog,
processLog: params.ProcessLog, processLog: params.ProcessLog,
now: params.Now, now: params.Now,
metrics: params.Metrics, metrics: m,
awaitingReport: awaitingReport, awaitingReport: awaitingReport,
limiter: params.Limiter, limiter: ratelimit.New(ratelimit.Limits{
ledger: params.Ledger, PerMinute: params.Config.RateLimitPerMinute,
geojs: params.GeoJS, PerHour: params.Config.RateLimitPerHour,
anomalies: params.Anomalies, PerDay: params.Config.RateLimitPerDay,
lookupFile: params.LookupFile, BytesPerMinute: params.Config.BytesLimitPerMinute,
lists: params.Lists, BytesPerHour: params.Config.BytesLimitPerHour,
dnsbl: params.DNSBL, BytesPerDay: params.Config.BytesLimitPerDay,
abuseIPDB: params.AbuseIPDB, }, params.Config.MaxTrackedClients),
routeWatch: params.RouteWatch, ledger: bans.New(bans.Params{
rules: params.Rules, LimitBanDuration: params.Config.LimitBanDuration,
coreRuleSet: params.CoreRuleSet, LimitBanRepeatWindow: params.Config.LimitBanRepeatWindow,
alerts: params.Alerts, LimitBanPermanentAbove: params.Config.LimitBanPermanentAbove,
// The country list, the headers, the tag settings that name an asn= AttackBanDuration: params.Config.AttackBanDuration,
// or country= tag and the biased thresholds act on the answer before MaxBans: params.Config.MaxBans,
// the request goes on. }),
waitForGeoJS: len(params.Config.ExclusivelyAllowedCountries) > 0 || anomalies: anomaly.New(anomaly.Params{
params.Config.AddLookupHeaders || Client: params.Config.AnomalyClient,
params.Config.TagsNeedLookup() || Net: params.Config.AnomalyNet,
biasedThresholdsSet(params.Config), ASN: params.Config.AnomalyASN,
Total: params.Config.AnomalyTotal,
WatchedNet: params.Config.AnomalyWatchedNet,
NetV4Prefix: params.Config.AnomalyNetV4Prefix,
NetV6Prefix: params.Config.AnomalyNetV6Prefix,
NamedNetblocks: params.Config.AnomalyWatchedNets,
Alerts: params.Alerts,
}),
lookupFile: params.LookupFile,
rules: params.Rules,
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
besideLookupLimit: cmp.Or( besideLookupLimit: cmp.Or(
params.BesideLookupTimeLimit, params.BesideLookupTimeLimit,
besideLookupTimeLimit, besideLookupTimeLimit,
), ),
} }
h.lists, h.dnsbl, h.abuseIPDB = newReputation(
params, m, h.banAbuseIPDBBlacklist,
)
if params.Config.RouteWatchURL != "" {
h.routeWatch = routewatch.New(routewatch.Params{
URL: params.Config.RouteWatchURL, Now: params.Now, ProcessLog: params.ProcessLog,
})
}
// The country list, the headers, the tag settings that name an asn= or
// country= tag and the biased thresholds act on the answer before the
// request goes on.
h.waitForGeoJS = len(params.Config.ExclusivelyAllowedCountries) > 0 ||
params.Config.AddLookupHeaders || params.Config.TagsNeedLookup() ||
biasedThresholdsSet(params.Config)
h.geojs = geojs.New(geojs.Params{
URL: params.GeoJSURL,
Answered: h.addLookup,
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: h.geojsFailed,
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddBansAndClients(h.ledger, h.limiter, params.Now)
m.AddRules(params.Rules)
return h
}
// newReputation returns the lists fetched from URLs, the DNSBL zones'
// verdicts and AbuseIPDB's scores, as the settings in params name them,
// with none fetched, asked for or checked yet, and adds their metrics to
// m, AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set. blacklisted receives
// the clients on each AbuseIPDB blacklist fetched.
func newReputation(
params Params, m *metrics.Metrics,
blacklisted func([]reputation.BlacklistEntry),
) (*reputation.Lists, *reputation.DNSBL, *reputation.AbuseIPDB) {
cfg := params.Config
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
dnsbl := reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones, Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: params.AbuseIPDBURL, Key: cfg.AbuseIPDBKey, MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget, CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, BlacklistURL: params.AbuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold, BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: blacklisted, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
return lists, dnsbl, abuseIPDB
}
// NewCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
// without the rules SWW_WAF_CORE_RULE_SET_DISABLED_RULES switches off, reading bodies
// up to SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE, with the exclusions in
// SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE and the fixes of the apps in SWW_WAF_APPS,
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. An exclusions file that
// coreruleset.New refuses is an error in every mode. While the mode is off, a
// set file is loaded with the Core Rule Set only to check it.
func NewCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff &&
cfg.CoreRuleSetExclusionsFile == "" {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
coreRuleSet, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil {
return nil, fmt.Errorf(
"SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE: %w",
err,
)
}
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
return coreRuleSet, nil
} }
// handler is waf's handler. It holds what every request shares; what // handler is waf's handler. It holds what every request shares; what
+30 -189
View File
@@ -16,19 +16,10 @@ import (
"time" "time"
"sneak.berlin/go/smallwebwaf/internal/alerts" "sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config" "sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest" "sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup" "sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/processlog"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog" "sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rproxy" "sneak.berlin/go/smallwebwaf/internal/rproxy"
"sneak.berlin/go/smallwebwaf/internal/rules" "sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/waf" "sneak.berlin/go/smallwebwaf/internal/waf"
@@ -399,11 +390,11 @@ func startRProxy(
server := rproxy.New(rproxy.Params{ server := rproxy.New(rproxy.Params{
Config: cfg, Config: cfg,
RequestLog: io.Discard, RequestLog: io.Discard,
ProcessLog: processlog.New(processlog.Params{ ProcessLog: requestlog.NewProcessLogger(
Output: io.Discard, io.Discard,
InstanceName: "rproxy", "rproxy",
Level: slog.LevelInfo, slog.LevelInfo,
}), ),
}) })
listener, err := (&net.ListenConfig{}).Listen( listener, err := (&net.ListenConfig{}).Listen(
@@ -445,15 +436,13 @@ func newWAF(
) (*waf.Server, *output, *alerts.Queue) { ) (*waf.Server, *output, *alerts.Queue) {
t.Helper() t.Helper()
return newWAFWith(t, waf.New, geojsURL, abuseIPDBURL, now, env) return newWAFWith(t, waf.New, geojsURL, now, env)
} }
// newWAFWith is newWAF for the server build makes, with clients checked with // newWAFWith is newWAF for the server build makes.
// AbuseIPDB at abuseIPDBCheckURL.
func newWAFWith( func newWAFWith(
t *testing.T, build func(waf.Params) *waf.Server, t *testing.T, build func(waf.Params) *waf.Server,
geojsURL, abuseIPDBCheckURL string, now func() time.Time, geojsURL string, now func() time.Time, env map[string]string,
env map[string]string,
) (*waf.Server, *output, *alerts.Queue) { ) (*waf.Server, *output, *alerts.Queue) {
t.Helper() t.Helper()
@@ -472,11 +461,11 @@ func newWAFWith(
} }
out := &output{} out := &output{}
processLog := processlog.New(processlog.Params{ processLog := requestlog.NewProcessLogger(
Output: out, out,
InstanceName: cfg.InstanceName, cfg.InstanceName,
Level: cfg.LogLevel, cfg.LogLevel,
}) )
ruleFiles, err := rules.Load(rules.Params{ ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir, Enabled: cfg.RuleFilesEnabled, ProcessLog: processLog, Dir: cfg.RuleFilesDir, Enabled: cfg.RuleFilesEnabled, ProcessLog: processLog,
@@ -506,177 +495,29 @@ func newWAFWith(
} }
} }
params := waf.Params{ coreRuleSet, err := waf.NewCoreRuleSet(cfg)
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
LookupFile: lookupFile,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
// The tests of the limit set it back, and hold the Core Rule Set
// with a stand-in.
BesideLookupTimeLimit: time.Hour,
}
addCoreRuleSet(t, &params)
addCounters(&params)
addOutsideSources(&params, geojsURL, abuseIPDBCheckURL)
server := build(params)
return server, out, alertQueue
}
// addCoreRuleSet adds to params the Core Rule Set, with the settings for it,
// while SWW_WAF_CORE_RULE_SET_MODE is not off.
func addCoreRuleSet(t *testing.T, params *waf.Params) {
t.Helper()
cfg := params.Config
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return
}
coreRuleSet, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil { if err != nil {
t.Fatalf("Core Rule Set: %v", err) t.Fatalf("Core Rule Set: %v", err)
} }
params.CoreRuleSet = coreRuleSet server := build(waf.Params{
} Config: cfg,
RequestLog: out,
// addCounters adds to params the metrics, the table of clients, the ledger ProcessLog: processLog,
// and the anomaly counters, as sww builds them from params' settings. The GeoJSURL: geojsURL,
// metrics read the ledger, the table of clients and the rules. AbuseIPDBURL: abuseIPDBURL,
func addCounters(params *waf.Params) { LookupFile: lookupFile,
cfg := params.Config CoreRuleSet: coreRuleSet,
Now: now,
params.Metrics = metrics.New( Rules: ruleFiles,
cfg.MetricsBusiestCountriesAndASNs, Alerts: alertQueue,
cfg.InstanceName, // The tests of the limit set it back, and hold the Core Rule Set
) // with a stand-in.
params.Limiter = ratelimit.New(ratelimit.Params{ BesideLookupTimeLimit: time.Hour,
Limits: ratelimit.Limits{ AbuseIPDBBlacklistURL: abuseIPDBBlacklistURL,
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
},
MaxClients: cfg.MaxTrackedClients,
})
params.Ledger = bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
params.Anomalies = anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: params.Alerts,
}) })
params.Metrics.AddBansAndClients( return server, out, alertQueue
params.Ledger,
params.Limiter,
params.Now,
)
params.Metrics.AddRules(params.Rules)
}
// addOutsideSources adds to params the lists fetched from URLs, the DNSBL
// zones' verdicts, AbuseIPDB's scores from abuseIPDBCheckURL and its
// blacklist from abuseIPDBBlacklistURL, routewatch's answers while its
// setting is set, and GeoJS at geojsURL, as sww builds
// them from params' settings and the parts addCounters added. The metrics
// read the lists, the zones' verdicts, and AbuseIPDB's while its key is set.
func addOutsideSources(
params *waf.Params, geojsURL, abuseIPDBCheckURL string,
) {
cfg := params.Config
m, limiter, ledger := params.Metrics, params.Limiter, params.Ledger
processLog, alertQueue := params.ProcessLog, params.Alerts
params.Lists = reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.DNSBL = reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.AbuseIPDB = reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: abuseIPDBCheckURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: abuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, params.Now(), listed,
)
},
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if cfg.RouteWatchURL != "" {
params.RouteWatch = routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: params.Now,
ProcessLog: processLog,
})
}
params.GeoJS = geojs.New(geojs.Params{
URL: geojsURL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddReputation(params.Lists, params.DNSBL)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(params.AbuseIPDB)
}
} }
// newClient returns an HTTP client that sends requests as they are made, // newClient returns an HTTP client that sends requests as they are made,
+3 -6
View File
@@ -38,11 +38,8 @@ func (rateLimits) check(
rq.line.BytesLimitPercent, rq.line.BytesLimitPercentSetting = rq.line.BytesLimitPercent, rq.line.BytesLimitPercentSetting =
rq.bytesLimitPercent.logged() rq.bytesLimitPercent.logged()
counts, hit, over := rq.h.limiter.Count( counts, hit, over := rq.h.limiter.Count(rq.h.clientGroup(rq.client), now,
clientGroup(rq.h.config, rq.client), rq.rateLimitPercent.percent)
now,
rq.rateLimitPercent.percent,
)
rq.line.Counts = counts rq.line.Counts = counts
if !over { if !over {
@@ -62,7 +59,7 @@ func (rateLimits) check(
// limit. It counts nothing. // limit. It counts nothing.
func (rq *request) overAWholeRateLimit(now time.Time) bool { func (rq *request) overAWholeRateLimit(now time.Time) bool {
return rq.countedByRateLimits() && return rq.countedByRateLimits() &&
rq.h.limiter.OverARateLimit(clientGroup(rq.h.config, rq.client), now) rq.h.limiter.OverARateLimit(rq.h.clientGroup(rq.client), now)
} }
// countedByRateLimits reports whether the rate limits count the request: its // countedByRateLimits reports whether the rate limits count the request: its
+2 -5
View File
@@ -36,11 +36,8 @@ func (refusalLimit) check(
return nil return nil
} }
hit, over := rq.h.limiter.CountRefusal( hit, over := rq.h.limiter.CountRefusal(rq.h.clientGroup(rq.client), now,
clientGroup(rq.h.config, rq.client), cfg.RefusalsLimitPerMinute)
now,
cfg.RefusalsLimitPerMinute,
)
if !over { if !over {
return nil return nil
} }
+5 -1
View File
@@ -7,6 +7,10 @@ import (
"sneak.berlin/go/smallwebwaf/internal/bans" "sneak.berlin/go/smallwebwaf/internal/bans"
) )
// deny is the SWW_WAF_BLOCKLIST_ACTION and the SWW_WAF_DNSBL_ABUSEIPDB_ACTION that
// refuses the requests of a client a source lists.
const deny = "deny"
// noteListed notes each of sources, the URLs of the blocklists or the // noteListed notes each of sources, the URLs of the blocklists or the
// DNSBL zones, their keys masked, that list the client, as noteHit does, // DNSBL zones, their keys masked, that list the client, as noteHit does,
// with reason. // with reason.
@@ -33,7 +37,7 @@ func (rq *request) noteHit(hit bans.ReputationHit, reason string) {
Event: alerts.EventReputationHit, Event: alerts.EventReputationHit,
Host: rq.site, Host: rq.site,
Client: rq.client, Client: rq.client,
Netblock: clientGroup(rq.h.config, rq.client), Netblock: rq.h.clientGroup(rq.client),
ASN: rq.line.ASN, ASN: rq.line.ASN,
ASName: rq.line.ASName, ASName: rq.line.ASName,
Country: rq.line.Country, Country: rq.line.Country,
+6 -6
View File
@@ -122,7 +122,7 @@ func (h *handler) startRequest(
RequestID: requestID(r, isQuestion), RequestID: requestID(r, isQuestion),
PeerIP: peer.String(), PeerIP: peer.String(),
ForwardedFor: strings.Join(forwardedFor, ", "), ForwardedFor: strings.Join(forwardedFor, ", "),
ClientGroup: clientGroup(h.config, client).String(), ClientGroup: h.clientGroup(client).String(),
ContentType: r.Header.Get("Content-Type"), ContentType: r.Header.Get("Content-Type"),
RequestHeaders: requestHeaders( RequestHeaders: requestHeaders(
r, r,
@@ -365,7 +365,7 @@ func (rq *request) addToHistory() {
} }
rq.h.limiter.AddToHistory( rq.h.limiter.AddToHistory(
clientGroup(rq.h.config, rq.client), rq.h.clientGroup(rq.client),
rq.h.now(), rq.h.now(),
request, request,
) )
@@ -373,7 +373,7 @@ func (rq *request) addToHistory() {
answer, found := rq.answerAtTheEnd() answer, found := rq.answerAtTheEnd()
if found { if found {
AddLookup(rq.h.config, rq.h.limiter, rq.h.ledger, answer) rq.h.addLookup(answer)
} }
} }
@@ -394,7 +394,7 @@ func (rq *request) countAnomalies() {
rq.h.anomalies.Count(rq.h.now(), anomaly.Request{ rq.h.anomalies.Count(rq.h.now(), anomaly.Request{
Host: rq.site, Host: rq.site,
Client: rq.client, Client: rq.client,
ClientGroup: clientGroup(rq.h.config, rq.client), ClientGroup: rq.h.clientGroup(rq.client),
ASN: answer.ASN, ASN: answer.ASN,
ASName: answer.ASName, ASName: answer.ASName,
Country: answer.Country, Country: answer.Country,
@@ -421,11 +421,11 @@ func (rq *request) answerAtTheEnd() (geojs.Answer, bool) {
return geojs.Answer{}, false return geojs.Answer{}, false
} }
if rq.h.config.LookupSource == config.LookupSourceFile { if rq.h.config.LookupSource == "file" {
return rq.lookupAnswer, true return rq.lookupAnswer, true
} }
return rq.h.geojs.Kept(clientGroup(rq.h.config, rq.client)) return rq.h.geojs.Kept(rq.h.clientGroup(rq.client))
} }
// responseWriter is waf's answer to a request. It notes the status and // responseWriter is waf's answer to a request. It notes the status and
+1 -1
View File
@@ -32,7 +32,7 @@ func (routeWatchTags) check(
route, missing := rq.h.routeWatch.Route( route, missing := rq.h.routeWatch.Route(
ctx, ctx,
clientGroup(rq.h.config, rq.client), rq.h.clientGroup(rq.client),
rq.client, rq.client,
) )
if missing != "" { if missing != "" {