Compare commits

..
Author SHA1 Message Date
clawbot 44e9d45cd1 waf: name the blacklist bans in the package doc
check / check (push) Successful in 8m52s
The package doc said waf answers rproxy's questions, takes its reports
and answers its own endpoints. The bans for AbuseIPDB's blacklist, made
as the reputation package fetches it, are none of these, so the new
file abuseipdbblacklist.go was outside it.

Model: opus-5-5
2026-11-19 10:18:47 +00:00
clawbot dfffeb73ec waf: ban the clients on AbuseIPDB's blacklist (closes #411)
check / check (push) Failing after 8m52s
While SWW_WAF_ABUSEIPDB_KEY is set, waf fetches AbuseIPDB's blacklist at
the start and every SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS
(60), cut at SWW_WAF_ABUSEIPDB_THRESHOLD (90, from 25 to 100). Each
listed client's netblock gets a ban of SWW_WAF_ABUSEIPDB_BAN_DAYS (30)
with the new cause abuseipdb. The blacklist itself is not kept.

These bans do not count toward SWW_WAF_MAX_BANS, so a 10,000-address
blacklist cannot push out the bans for limits and attacks. An ended
abuseipdb ban is forgotten at each fetch and each read of bans.json. A
netblock with an active ban is left alone, and so is one whose abuseipdb
ban an admin lifted, until that ban would have ended. Observe mode makes
no ban.

Model: opus-5-5
2026-11-19 10:03:42 +00:00
40 changed files with 783 additions and 1282 deletions

No files matched your search

+2 -140
View File
@@ -424,8 +424,8 @@ full, and the limits that are fixed rather than settings.
Each example is a complete `compose.yaml`. `smallwebwaf` is the tag
`make docker` gives the image; on another host, use the name you pushed it
under, by digest. Docker Compose puts the services on a private network of its
own, where each reaches the others by service name. Each example but "On the
open internet" publishes `rproxy`'s port on the host, for trying it out.
own, where each reaches the others by service name. Each example publishes
`rproxy`'s port on the host, for trying it out.
### Smallest setup
@@ -457,142 +457,6 @@ volumes:
waf-state:
```
### On the open internet
One gitea at `git.example.com`, with traefik in front of `rproxy`. traefik gets
the certificate from Let's Encrypt and is the only service with published ports.
`waf` sets what most sites set. More `waf` settings follow, commented out, each
with what it does and when to set it.
```yaml
services:
traefik:
# traefik v3.7.19, 2026-11-13
image: traefik@sha256:a6c0194dda77bcb804824580f36fa7edc56e315b1acfe933366c8b52844a78a4
restart: unless-stopped
command:
- --providers.docker=true
- --providers.docker.exposedByDefault=false
- --entryPoints.web.address=:80
- --entryPoints.websecure.address=:443
# Redirect plain HTTP to HTTPS.
- --entryPoints.web.http.redirections.entryPoint.to=websecure
- --entryPoints.web.http.redirections.entryPoint.scheme=https
# A Let's Encrypt certificate for each site, by the TLS-ALPN
# challenge on port 443.
- --entryPoints.websecure.http.tls.certResolver=le
- --certificatesResolvers.le.acme.email=hostmaster@example.com
- --certificatesResolvers.le.acme.storage=/letsencrypt/acme.json
- --certificatesResolvers.le.acme.tlsChallenge=true
# Give a request 10 minutes to arrive, rather than 1, for the
# large git pushes the rproxy lines below accept.
# - --entryPoints.websecure.transport.respondingTimeouts.readTimeout=600s
ports:
- "80:80"
- "443:443"
volumes:
- /var/run/docker.sock:/var/run/docker.sock:ro
- acme:/letsencrypt
app:
# Your app: here a gitea, which listens on port 3000.
image: registry.example/app@sha256:0000000000000000000000000000000000000000000000000000000000000000
restart: unless-stopped
rproxy:
image: smallwebwaf
restart: unless-stopped
environment:
SWW_RPROXY_WAF_BACKEND: http://waf:8080
SWW_RPROXY_UPSTREAM_URL: http://app:3000
# Accept git pushes up to 1 GiB, rather than 100 MiB, sent in
# up to 10 minutes, rather than 1, with traefik's readTimeout
# line above.
# SWW_RPROXY_MAX_REQUEST_SIZE: 1G
# SWW_RPROXY_MAX_REQUEST_TIME_MS: "600000"
labels:
- traefik.enable=true
- traefik.http.routers.git.rule=Host(`git.example.com`)
- traefik.http.routers.git.entryPoints=websecure
- traefik.http.services.git.loadBalancer.server.port=8080
waf:
image: smallwebwaf
restart: unless-stopped
environment:
SWW_COMMAND: waf
# The name in every log line, alert and metric. The default,
# the container's host name, is a random id under Compose.
SWW_WAF_INSTANCE_NAME: host1/waf
# The app each hostname serves. Only that app's fixes to the
# Core Rule Set apply there.
SWW_WAF_APPS: git.example.com:gitea
# Monitoring skips every check.
SWW_WAF_ALLOW_NETS: 192.0.2.10
# The office and the CI runner, which would exceed the rate
# limits, are never rate limited.
SWW_WAF_RATE_LIMIT_EXEMPT_NETS: 203.0.113.0/24,198.51.100.7
# WordPress paths, which only scanners ask a gitea for. One
# request for one bans the client.
SWW_WAF_TRAP_PATHS: /wp-login.php,/xmlrpc.php
# Spamhaus's list of netblocks hijacked or leased by
# criminals. Their clients are refused.
SWW_WAF_BLOCKLIST_URLS: https://www.spamhaus.org/drop/drop.txt
# The token for the ban endpoints, to lift a ban without
# editing bans.json.
SWW_WAF_ADMIN_TOKEN_FILE: /etc/sww/tokens/admin
# Alerts, such as one for each ban, to an ntfy topic.
SWW_WAF_ALERT_NTFY_URL: https://ntfy.example.com/smallwebwaf
# Refuse nothing and ban no one, for the first days. Each log
# line says what enforce mode would have done.
# SWW_WAF_MODE: observe
# The access token for an ntfy topic that is not public.
# SWW_WAF_ALERT_NTFY_TOKEN_FILE: /etc/sww/tokens/ntfy
# The token for /_sww/metrics, for Prometheus. Unset, the
# metrics are off.
# SWW_WAF_METRICS_TOKEN_FILE: /etc/sww/tokens/metrics
# 600 requests an hour rather than 1500, to ban slower
# scrapers. A fast human reader can reach it too.
# SWW_WAF_RATE_LIMIT_PER_HOUR: "600"
# A quarter of every limit for clients in two hosting
# networks, where scrapers run rather than people.
# SWW_WAF_TAG_LIMIT_PERCENT: asn=14061:25,asn=16276:25
# For a site only for people in a few countries. Clients
# elsewhere are refused, and so are any the lookup cannot place.
# SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES: de,at,ch
# Close a refused request's connection rather than answer
# 403. traefik then answers 502, so a scraper cannot tell a
# ban from a broken site.
# SWW_WAF_BAN_RESPONSE: close
# A copy of every log line to a syslog server.
# SWW_WAF_LOG_REMOTE_URL: syslog+tls://logs.example.com:6514
volumes:
- waf-state:/var/lib/sww
- /srv/sww/tokens:/etc/sww/tokens:ro
volumes:
acme:
waf-state:
```
Change these before the first start:
- `git.example.com`, in the router rule and in `SWW_WAF_APPS`;
- the email address for Let's Encrypt;
- the ntfy topic's URL;
- the app's image and port;
- the netblocks, which are documentation addresses.
Make the admin token file first, as for any token file:
```sh
mkdir -p /srv/sww/tokens
openssl rand -hex 32 > /srv/sww/tokens/admin
chown 65532:65532 /srv/sww/tokens/admin
chmod 0400 /srv/sww/tokens/admin
```
### Custom per-address limits
For a site with no API:
@@ -896,8 +760,6 @@ stops the running process (see [`docs/state-files.md`](docs/state-files.md)).
- `cmd/sww`: the binary, which only calls `internal/sww`.
- `internal/sww`: the process, as the command it is given, and the health check.
It is the only package that imports `go.uber.org/fx`, which builds the parts
of `waf` and `rproxy`.
- `internal/config`: reads the settings, the one place they are read.
- `internal/rproxy`: the reverse proxy in front of one app.
- `internal/waf`: `waf`'s server, which runs the checks and answers its own
+31 -34
View File
@@ -69,9 +69,7 @@ never as a time.
that command's settings, and runs `internal/rproxy` until `SIGTERM` or
`SIGINT` (see "`rproxy`"). `sww healthcheck` is the image's health check.
With no command, or one it does not know, the binary prints the commands
and exits with status 2. `internal/sww` is the only package that imports
`go.uber.org/fx`. fx builds the parts of `waf` and `rproxy`, and starts
and stops their background work.
and exits with status 2.
- `internal/config`: reads the settings, the one place they are read.
- `internal/waf`: `waf`'s server. It runs the checks in `check`, and holds
`waf`'s question, answer and report. It answers `waf`'s own endpoints in
@@ -817,8 +815,8 @@ The supported apps are:
- `vaultwarden`;
- `wordpress`.
Each app's fixes are in one file named for the app, such as
`internal/coreruleset/apps/gitea.conf`. gitea's fixes are:
Each app's fixes are in one file, such as `internal/coreruleset/gitea.conf`, and
one entry of `apps` in `internal/coreruleset/coreruleset.go`. gitea's fixes are:
1. Ten parameters are not checked against the Core Rule Set's lists of system
files (930120), shell paths (932160) and command names (932260), on any path:
@@ -851,8 +849,8 @@ Each app's fixes are in one file named for the app, such as
3. On gitea's paths, some fields skip the rules that refused ordinary gitea
requests there. They are the fields where gitea sends a search, a file's name
or text, a commit message, a branch name or a repository's name.
`internal/coreruleset/apps/gitea.conf` lists each rule and the request it
refused. The fields are:
`internal/coreruleset/gitea.conf` lists each rule and the request it refused.
The fields are:
- `q` on gitea's searches of code, of issues and pull requests, and of
commits. A code search holds code, such as `<script>`,
`SELECT * FROM users WHERE` or `../`. The searches of issues and pull
@@ -1037,7 +1035,7 @@ Each app's fixes are in one file named for the app, such as
- The `Content-Range` header of an artifact upload from
`actions/upload-artifact@v3` (920450).
- The passwords in a body, for each rule that random passwords set off. The
numbers are in `internal/coreruleset/apps/gitea.conf`.
numbers are in `internal/coreruleset/gitea.conf`.
- `password` on these paths:
- `/user/login`, `/user/sign_up`, `/user/activate`;
- `/user/link_account_signin` and `/user/link_account_signup`;
@@ -1069,8 +1067,8 @@ Each app's fixes are in one file named for the app, such as
such as `owner/python3-app` would have that push refused.
WordPress's fixes: on WordPress's paths, some fields skip the rules that refused
ordinary WordPress requests there. `internal/coreruleset/apps/wordpress.conf`
lists each rule and the request it refused. The REST API has four addresses:
ordinary WordPress requests there. `internal/coreruleset/wordpress.conf` lists
each rule and the request it refused. The REST API has four addresses:
- `/wp-json/...`
- `/index.php/wp-json/...`
@@ -1162,9 +1160,9 @@ Elsewhere WordPress's fixes do not apply. The paths are those of WordPress at
the site root.
Drupal's fixes: on Drupal's paths, some fields skip the rules that refused
ordinary Drupal requests there. `internal/coreruleset/apps/drupal.conf` lists
each rule and the request it refused. These query fields skip the lists of
system files and command names (930120, 932120, 932250, 932260):
ordinary Drupal requests there. `internal/coreruleset/drupal.conf` lists each
rule and the request it refused. These query fields skip the lists of system
files and command names (930120, 932120, 932250, 932260):
- On every page under `/admin`: `title`, `name`, `user`, `filename`, `filemime`,
`info`, `subject`, `author_name`, `search`, `q` and `destination`.
@@ -1254,10 +1252,10 @@ first path segment of two or three lowercase letters, optionally followed by a
hyphen and more letters, so `/api` counts too.
MediaWiki's fixes: on MediaWiki's paths, some fields skip the rules that refused
ordinary MediaWiki requests there. `internal/coreruleset/apps/mediawiki.conf`
lists each rule and the request it refused. These fields skip the lists of
system files and command names (930120, 932120, 932250, 932260), in the query or
the body:
ordinary MediaWiki requests there. `internal/coreruleset/mediawiki.conf` lists
each rule and the request it refused. These fields skip the lists of system
files and command names (930120, 932120, 932250, 932260), in the query or the
body:
- On MediaWiki's pages, which are `/index.php` and the paths under `/index.php/`
and `/wiki/`:
@@ -1363,9 +1361,9 @@ Elsewhere these fields keep every rule. The paths are those of MediaWiki at the
site root or under `/w/`.
Mastodon's fixes: on Mastodon's paths, some fields skip the rules that refused
ordinary Mastodon requests there. `internal/coreruleset/apps/mastodon.conf`
lists each rule and the request it refused. These fields skip the lists of
system files and command names (930120, 932120, 932250, 932260), in the query:
ordinary Mastodon requests there. `internal/coreruleset/mastodon.conf` lists
each rule and the request it refused. These fields skip the lists of system
files and command names (930120, 932120, 932250, 932260), in the query:
- On the API's search, accounts and admin accounts, under `/api/v1/` and
`/api/v2/`, the searches and names `q`, `acct`, `username`, `display_name`,
@@ -1526,7 +1524,7 @@ every rule.
Vaultwarden's fixes: on Vaultwarden's paths, some fields skip the rules that
refused ordinary Vaultwarden requests there.
`internal/coreruleset/apps/vaultwarden.conf` lists each rule and the request it
`internal/coreruleset/vaultwarden.conf` lists each rule and the request it
refused. The apps encrypt vault items, folders, collections and sends before
sending them, so those fields skip no rules. The fields below hold plain text.
@@ -1577,8 +1575,8 @@ has a parameter of the same name.
`token` in the body of `/admin`, the admin token typed on the admin page, skips
each rule that random passwords set off. The numbers are in
`internal/coreruleset/apps/vaultwarden.conf`. It applies only when the query has
no `token` parameter. `' OR '1'='1`, `../../etc/passwd`, `; cat /etc/passwd` and
`internal/coreruleset/vaultwarden.conf`. It applies only when the query has no
`token` parameter. `' OR '1'='1`, `../../etc/passwd`, `; cat /etc/passwd` and
`<img src=x onerror=x()>` sent as the token reach Vaultwarden;
`<script>alert(1)</script>` and `javascript:alert(1)` are still refused.
@@ -1600,7 +1598,7 @@ Elsewhere these fields keep every rule.
Nextcloud's fixes: on Nextcloud's paths, some fields skip the rules that refused
ordinary Nextcloud requests there, and its WebDAV methods are allowed.
`internal/coreruleset/apps/nextcloud.conf` lists each rule and the request it
`internal/coreruleset/nextcloud.conf` lists each rule and the request it
refused.
The sync client and the Files app use WebDAV on these paths:
@@ -1610,8 +1608,7 @@ The sync client and the Files app use WebDAV on these paths:
- `/remote.php/webdav/`;
- `/public.php/webdav/`.
These methods are allowed there, besides `PUT`, `PATCH` and `DELETE`, which
every app gets:
These methods are allowed there, besides those of the first change:
- `PROPFIND` and `PROPPATCH`;
- `MKCOL`;
@@ -1755,7 +1752,7 @@ gets gitea's fixes too. Forgejo's own fixes hold only what Forgejo sends and
gitea does not.
On Forgejo's paths, some fields skip the rules that refused ordinary Forgejo
requests there. `internal/coreruleset/apps/forgejo.conf` lists each rule and the
requests there. `internal/coreruleset/forgejo.conf` lists each rule and the
request it refused.
`q` skips rules on some of Forgejo's searches. The searches are:
@@ -1801,10 +1798,10 @@ The Core Rule Set reads the request without the `flash` cookie, in which Forgejo
puts what gitea puts in `gitea_flash` (gitea's second fix).
Ghost's fixes: on Ghost's paths, some fields skip the rules that refused
ordinary Ghost requests there. `internal/coreruleset/apps/ghost.conf` lists each
rule and the request it refused. Ghost's admin and integrations call the Admin
API under `/ghost/api/admin/`. Themes and Ghost's scripts call the Content API
under `/ghost/api/content/`, and members call `/members/api/`. The admin calls
ordinary Ghost requests there. `internal/coreruleset/ghost.conf` lists each rule
and the request it refused. Ghost's admin and integrations call the Admin API
under `/ghost/api/admin/`. Themes and Ghost's scripts call the Content API under
`/ghost/api/content/`, and members call `/members/api/`. The admin calls
ActivityPub, a service of its own, under `/.ghost/activitypub/`.
Eight rules refused words that name commands and files, such as `python3`,
@@ -1942,9 +1939,9 @@ That name holds `.profile`, a file on the list of system files, so the name
skips 930120 when a profile is saved.
The passwords skip each rule that random passwords set off. The numbers are in
`internal/coreruleset/apps/ghost.conf`. They are `password` when signing in, and
the passwords sent when creating the first staff user, accepting an invitation,
and resetting or changing a password. `' OR '1'='1`, `../../etc/passwd`,
`internal/coreruleset/ghost.conf`. They are `password` when signing in, and the
passwords sent when creating the first staff user, accepting an invitation, and
resetting or changing a password. `' OR '1'='1`, `../../etc/passwd`,
`; cat /etc/passwd` and `<img src=x onerror=x()>` sent as a password reach
Ghost; `<script>alert(1)</script>` and `javascript:alert(1)` are still refused.
-4
View File
@@ -12,7 +12,6 @@ require (
github.com/oschwald/maxminddb-golang/v2 v2.7.0
github.com/prometheus/client_golang v1.24.1
github.com/spf13/viper v1.21.0
go.uber.org/fx v1.24.0
golang.org/x/sys v0.48.0
)
@@ -45,9 +44,6 @@ require (
github.com/tidwall/match v1.1.1 // indirect
github.com/tidwall/pretty v1.2.1 // indirect
github.com/valllabh/ocsf-schema-golang v1.0.3 // indirect
go.uber.org/dig v1.19.0 // indirect
go.uber.org/multierr v1.10.0 // indirect
go.uber.org/zap v1.26.0 // indirect
go.yaml.in/yaml/v3 v3.0.5 // indirect
go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect
golang.org/x/net v0.60.0 // indirect
-8
View File
@@ -97,16 +97,8 @@ github.com/tidwall/pretty v1.2.1 h1:qjsOFOWWQl+N3RsoF5/ssm1pHmJJwhjlSbZ51I6wMl4=
github.com/tidwall/pretty v1.2.1/go.mod h1:ITEVvHYasfjBbM0u2Pg8T2nJnzm8xPwvNhhsoaGGjNU=
github.com/valllabh/ocsf-schema-golang v1.0.3 h1:eR8k/3jP/OOqB8LRCtdJ4U+vlgd/gk5y3KMXoodrsrw=
github.com/valllabh/ocsf-schema-golang v1.0.3/go.mod h1:sZ3as9xqm1SSK5feFWIR2CuGeGRhsM7TR1MbpBctzPk=
go.uber.org/dig v1.19.0 h1:BACLhebsYdpQ7IROQ1AGPjrXcP5dF80U3gKoFzbaq/4=
go.uber.org/dig v1.19.0/go.mod h1:Us0rSJiThwCv2GteUN0Q7OKvU7n5J4dxZ9JKUXozFdE=
go.uber.org/fx v1.24.0 h1:wE8mruvpg2kiiL1Vqd0CC+tr0/24XIB10Iwp2lLWzkg=
go.uber.org/fx v1.24.0/go.mod h1:AmDeGyS+ZARGKM4tlH4FY2Jr63VjbEDJHtqXTGP5hbo=
go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
go.uber.org/multierr v1.10.0 h1:S0h4aNzvfcFsC3dRF1jLoaov7oRaKqRGC/pUEJ2yvPQ=
go.uber.org/multierr v1.10.0/go.mod h1:20+QtiLqy0Nd6FdQB9TLXag12DsQkrbs3htMFfDN80Y=
go.uber.org/zap v1.26.0 h1:sI7k6L95XOKS281NhVKOFCUNIvv9e0w4BF8N3u+tCRo=
go.uber.org/zap v1.26.0/go.mod h1:dtElttAiwGvoJ/vj4IwHBS/gXsEu/pZ50mUIRWuG0so=
go.yaml.in/yaml/v2 v2.4.4 h1:tuyd0P+2Ont/d6e2rl3be67goVK4R6deVxCUX5vyPaQ=
go.yaml.in/yaml/v2 v2.4.4/go.mod h1:gMZqIpDtDqOfM0uNfy0SkpRhvUryYH0Z6wdMYcacYXQ=
go.yaml.in/yaml/v3 v3.0.5 h1:N6y/pJk8buWs9NY5ERU2HSMfm+IuD/OtfdAnq6kESPw=
+65 -43
View File
@@ -12,10 +12,11 @@
package coreruleset
import (
"embed"
_ "embed"
"errors"
"fmt"
"io"
"maps"
"net"
"net/http"
"net/netip"
@@ -34,7 +35,7 @@ import (
// directives are the Core Rule Set as sww runs it, with the
// paranoia level for %d, bodyDirectives for the first %s while
// SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE is set, the exclusions file for
// the second, and the fixes of every app in appFixes for the third.
// the second, and the directives of every app in apps for the third.
// Each rule sww adds has an id from 900000 to 900999, the ids the
// Core Rule Set keeps for the rules that set it up, which
// SWW_WAF_CORE_RULE_SET_DISABLED_RULES and the exclusions file refuse, so that no
@@ -53,12 +54,13 @@ Include @crs-setup.conf.example
SecAction "id:900000,phase:1,pass,nolog,\
setvar:tx.blocking_paranoia_level=%d"
# PUT, PATCH and DELETE are allowed besides GET, HEAD, POST and OPTIONS.
# The first change: PUT, PATCH and DELETE are allowed besides GET, HEAD,
# POST and OPTIONS.
SecAction "id:900200,phase:1,pass,nolog,\
setvar:'tx.allowed_methods=GET HEAD POST OPTIONS PUT PATCH DELETE'"
# Expect and Content-Encoding are taken off the Core Rule Set's list of the
# headers it refuses. Content-Encoding goes back on it for a
# The second: Expect and Content-Encoding are taken off the Core Rule Set's
# list of the headers it refuses. Content-Encoding goes back on it for a
# body the Core Rule Set reads (900260 in bodyDirectives).
SecAction "id:900250,phase:1,pass,nolog,\
setvar:'tx.restricted_headers_basic=/proxy/ /lock-token/ /content-range/ \
@@ -84,17 +86,18 @@ SecRule ARGUMENTS_LIMIT_REACHED "@eq 1" "id:900300,phase:2,pass,\
# The apps' fixes come before the rules for the same reason.
%s
# Only the rules for requests are loaded, and no response is inspected.
# The fifth: only the rules for requests are loaded, and no response is
# inspected.
Include @owasp_crs/REQUEST-*.conf
# redirect_uri is not checked for a URL naming an IP address or
# The third: redirect_uri is not checked for a URL naming an IP address or
# localhost. Coraza matches a parameter name here without regard to case.
# ARGS holds the fields of a form data or multipart body Coraza reads as
# well as the query parameters, so a field of this name is left out too.
SecRuleUpdateTargetById 931100 "!ARGS:redirect_uri"
SecRuleUpdateTargetById 934110 "!ARGS:redirect_uri"
# Referer is not checked for a Unix command without arguments
# The fourth: Referer is not checked for a Unix command without arguments
# or for Java starting a process.
SecRuleUpdateTargetById 932340 "!REQUEST_HEADERS:Referer"
SecRuleUpdateTargetById 944110 "!REQUEST_HEADERS:Referer"
@@ -119,9 +122,9 @@ SecRule REQUEST_HEADERS:Content-Type \
"@rx ^(?:application|text)/(?:[a-z0-9.-]+[+])?json" \
"id:900420,phase:1,pass,nolog,t:none,t:lowercase,ctl:requestBodyProcessor=JSON"
# Content-Encoding goes back on the list of the headers the Core Rule Set
# refuses (900250 in directives) for a body of a kind it reads, since a
# compressed body cannot be inspected.
# The rest of the second change: Content-Encoding is refused again on a
# body of a kind the Core Rule Set reads, since a compressed body cannot be
# inspected.
SecRule REQBODY_PROCESSOR "@rx ^(?:URLENCODED|MULTIPART|JSON|XML)$" \
"id:900260,phase:1,pass,nolog,\
setvar:'tx.restricted_headers_basic=%%{tx.restricted_headers_basic} \
@@ -142,19 +145,15 @@ SecRule MULTIPART_STRICT_ERROR "!@eq 0" "id:900450,phase:2,pass,\
severity:'CRITICAL',setvar:'tx.inbound_anomaly_score_pl1=+5'"
`
// appFixes holds the fixes of each app whose ordinary requests the Core
// Rule Set would refuse, in a file named for the app by the name
// SWW_WAF_APPS gives it, such as apps/gitea.conf. The fixes are Coraza
// exclusions, loaded before the Core Rule Set's rules. Their first rule
// skips to the marker they end with, unless Inspect sets the transaction
// variable named for the app, such as app_gitea. The skip reaches only
// phase 1, so a rule of a later phase must check that variable itself.
//
//go:embed apps/*.conf
var appFixes embed.FS
// app is what an app's file in appFixes cannot say about it.
// app is an app whose ordinary requests the Core Rule Set would refuse,
// with the fixes that let them pass.
type app struct {
// directives are Coraza exclusions, loaded before the Core Rule Set's
// rules. Their first rule skips to the marker they end with, unless
// Inspect sets the transaction variable named for the app, such as
// app_gitea. The skip reaches only phase 1, so a rule of a later phase
// must check that variable itself.
directives string
// cookies are the cookies the Core Rule Set reads a request without.
cookies []string
// forkOf names the app this one is a fork of, "" for none. A hostname
@@ -162,34 +161,60 @@ type app struct {
forkOf string
}
// apps are the apps that need more than their file in appFixes, by the
// name SWW_WAF_APPS gives each. flash is Forgejo's name for gitea_flash.
//go:embed gitea.conf
var giteaDirectives string
//go:embed wordpress.conf
var wordpressDirectives string
//go:embed drupal.conf
var drupalDirectives string
//go:embed mediawiki.conf
var mediawikiDirectives string
//go:embed mastodon.conf
var mastodonDirectives string
//go:embed vaultwarden.conf
var vaultwardenDirectives string
//go:embed nextcloud.conf
var nextcloudDirectives string
//go:embed forgejo.conf
var forgejoDirectives string
//go:embed ghost.conf
var ghostDirectives string
// apps are the apps whose fixes sww has, by the name SWW_WAF_APPS gives each.
// flash is Forgejo's name for gitea_flash.
//
//nolint:gochecknoglobals // a constant cannot be a map
var apps = map[string]app{
"drupal": {directives: drupalDirectives},
"forgejo": {
cookies: []string{"flash"},
forkOf: "gitea",
directives: forgejoDirectives,
cookies: []string{"flash"},
forkOf: "gitea",
},
"ghost": {directives: ghostDirectives},
"gitea": {
cookies: []string{"gitea_flash", "redirect_to"},
directives: giteaDirectives,
cookies: []string{"gitea_flash", "redirect_to"},
},
"mastodon": {directives: mastodonDirectives},
"mediawiki": {directives: mediawikiDirectives},
"nextcloud": {directives: nextcloudDirectives},
"vaultwarden": {directives: vaultwardenDirectives},
"wordpress": {directives: wordpressDirectives},
}
// AppNames returns the names of the apps whose fixes sww has, in
// alphabetical order.
func AppNames() []string {
// An embedded directory always reads.
files, _ := appFixes.ReadDir("apps")
names := make([]string, len(files))
for i, file := range files {
names[i] = strings.TrimSuffix(file.Name(), ".conf")
}
slices.Sort(names)
return names
return slices.Sorted(maps.Keys(apps))
}
// Params are what New needs.
@@ -348,11 +373,8 @@ func New(params Params) (*CoreRuleSet, error) {
}
var fixes strings.Builder
for _, name := range AppNames() {
// An embedded file always reads.
file, _ := appFixes.ReadFile("apps/" + name + ".conf")
fixes.WriteString(string(file) + "\n")
fixes.WriteString(apps[name].directives + "\n")
}
text := fmt.Sprintf(directives, params.ParanoiaLevel, body, exclusions,
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
+3 -3
View File
@@ -17,7 +17,7 @@ const (
)
// giteaSearches are searches of the pages gitea and Forgejo share whose q
// skips the lists of system files and command names, in gitea's fixes.
// skips the lists of system files and command names, in the eighth change.
// gitea serves its admin pages under /-/admin/ and Forgejo under /admin/.
//
//nolint:gochecknoglobals // a constant cannot be a list
@@ -222,8 +222,8 @@ func TestGiteaSearchExclusionsAreNarrow(t *testing.T) {
}
// Under /admin/, where Forgejo serves its admin pages, only the hard
// values are left out: Drupal's fixes let them through in q on every path
// there.
// values are left out: the tenth change lets them through in q on every
// path there, for Drupal.
for _, target := range []string{
"/admin/packages/delete?q=",
"/admin/packages?other=",
File renamed without changes.
File renamed without changes.
@@ -37,10 +37,9 @@
SecRule &TX:app_nextcloud "@eq 0" \
"id:900090,phase:1,pass,nolog,skipAfter:END_NEXTCLOUD"
# The sync client and the Files app use these WebDAV methods besides PUT,
# PATCH and DELETE, which sww allows for every app, on /remote.php/dav/ and
# /public.php/dav/ and on the older /remote.php/webdav/ and /public.php/webdav/.
# 911100 refused each:
# The sync client and the Files app use these WebDAV methods besides those
# the first change allows, on /remote.php/dav/ and /public.php/dav/ and on the
# older /remote.php/webdav/ and /public.php/webdav/. 911100 refused each:
# PROPFIND, PROPPATCH: listing a folder, marking a file a favourite
# MKCOL: making a folder, and starting a chunked upload
# COPY, MOVE: copying, moving and renaming, and ending a chunked upload
File renamed without changes.
+1 -3
View File
@@ -324,8 +324,7 @@ func greet(w http.ResponseWriter, r *http.Request) {
// startRProxy starts rproxy with waf at backend and the app at appURL, and
// the settings in env on top of the defaults. It returns where rproxy listens
// and what it writes. SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS is a minute unless env
// sets it, so that a busy host cannot make rproxy drop a question or a report.
// and what it writes.
func startRProxy(
t *testing.T, backend, appURL string, env map[string]string,
) (string, *output) {
@@ -358,7 +357,6 @@ func startServerLogging(
settings := map[string]string{
"SWW_RPROXY_WAF_BACKEND": backend, "SWW_RPROXY_UPSTREAM_URL": appURL,
wafBackendTimeout: "60000",
}
maps.Copy(settings, env)
-198
View File
@@ -1,198 +0,0 @@
package sww
import (
"context"
"errors"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"go.uber.org/fx/fxevent"
)
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// requestLog is where a daemon's server writes the request log: stdout, and
// the remote log sender while there is one. fx tells parts apart by type, so
// it has a type of its own.
type requestLog struct {
io.Writer
}
// servingFailed gets why serving failed, for run, which then stops the
// daemon. fx tells parts apart by type, so it has a type of its own.
type servingFailed chan error
// utcNow is the time the state files, the alerts and the rate limits go by.
func utcNow() time.Time {
return time.Now().UTC()
}
// startError is why a daemon cannot start: the message its process log gives,
// and the error it logs with it.
type startError struct {
message string
err error
}
func (e startError) Error() string {
return e.message + ": " + e.err.Error()
}
func (e startError) Unwrap() error {
return e.err
}
// cannotStart logs why a daemon cannot start, with the message of the
// startError in err, and returns its exit status.
func cannotStart(processLog *slog.Logger, err error) int {
message, cause := "cannot start", err
failed, ok := errors.AsType[startError](err)
if ok {
message, cause = failed.message, failed.err
}
processLog.Error(message, "error", cause.Error())
return 1
}
// listen listens on address, which the setting names.
func listen(address, setting string) (net.Listener, error) {
listener, err := (&net.ListenConfig{}).Listen(
context.Background(), "tcp", address)
if err != nil {
return nil, startError{"cannot listen on " + setting, err}
}
return listener, nil
}
// background returns the hook that runs loop on a goroutine of its own from
// the start, and at the stop ends it and waits for it to return.
func background(loop func(context.Context)) fx.Hook {
running, stop := context.WithCancel(context.Background())
ended := make(chan struct{})
return fx.StartStopHook(
func() {
go func() {
loop(running)
close(ended)
}()
},
func() {
stop()
<-ended
},
)
}
// serve serves requests on listener from the start. At the stop it gives the
// requests in progress shutdownTimeout to finish, then closes their
// connections. When serving fails, it logs why and sends the error to
// failed.
func serve(
lc fx.Lifecycle, server *http.Server, listener net.Listener,
processLog *slog.Logger, failed servingFailed,
) {
served := make(chan error, 1)
lc.Append(fx.Hook{
OnStart: func(context.Context) error {
go func() {
err := server.Serve(listener)
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
failed <- err
}
served <- err
}()
return nil
},
OnStop: func(ctx context.Context) error {
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(ctx, shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
return err
}
return nil
},
})
}
// run starts app, which serves until ctx is done or serving fails, as
// failed tells. Then it stops app and takes the daemon's last step. It
// returns the process's exit status, 1 when serving failed, a part could
// not stop in order or the last step failed; each logs why.
func run(
ctx context.Context, app *fx.App, failed servingFailed,
processLog *slog.Logger, lastStep func() error,
) int {
// The hooks only start goroutines, and end them at the stop, so neither
// is cut short by a deadline or by ctx.
err := app.Start(context.WithoutCancel(ctx))
if err != nil {
return cannotStart(processLog, err)
}
status := 0
select {
case <-ctx.Done():
case <-failed:
status = 1
}
err = app.Stop(context.WithoutCancel(ctx))
if err != nil {
status = 1
}
err = lastStep()
if err != nil {
status = 1
}
if status == 0 {
processLog.Info("stopped")
}
return status
}
// fxEventLogger returns what fx.WithLogger takes to write fx's own events to
// processLog at debug, which the daemons' log levels normally hold back. Its
// errors are at debug too: the daemon logs each one itself.
func fxEventLogger(processLog *slog.Logger) func() fxevent.Logger {
return func() fxevent.Logger {
logger := &fxevent.SlogLogger{Logger: processLog}
logger.UseLogLevel(slog.LevelDebug)
logger.UseErrorLevel(slog.LevelDebug)
return logger
}
}
+62 -41
View File
@@ -2,13 +2,12 @@ package sww
import (
"context"
"errors"
"log/slog"
"net"
"net/http"
"os"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rproxy"
@@ -31,31 +30,26 @@ func RunRProxy(ctx context.Context, params Params) int {
cfg, err := config.RProxyFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, startError{"invalid setting", err})
processLog.Error("invalid setting", "error", err.Error())
return 1
}
var (
server *rproxy.Server
listener net.Listener
)
server := rproxy.New(rproxy.Params{
Config: cfg,
RequestLog: params.Stdout,
ProcessLog: processLog,
})
failed := make(servingFailed, 1)
app := fx.New(
fx.Supply(cfg, processLog, requestLog{params.Stdout}, failed),
fx.Provide(
newRProxyServer,
func(server *rproxy.Server) *http.Server { return server.Server },
newRProxyListener,
),
fx.Invoke(serve),
fx.Populate(&server, &listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
if err != nil {
return cannotStart(processLog, err)
processLog.Error(
"cannot listen on SWW_RPROXY_LISTEN_ADDR",
"error",
err.Error(),
)
return 1
}
processLog.Info("starting",
@@ -63,25 +57,52 @@ func RunRProxy(ctx context.Context, params Params) int {
"address", listener.Addr().String(),
"settings", cfg)
return run(ctx, app, failed, processLog, func() error {
server.WaitForReports()
return nil
})
return serveRProxy(ctx, server, listener, processLog)
}
// newRProxyServer returns the server rproxy runs.
func newRProxyServer(
cfg *config.RProxy, out requestLog, processLog *slog.Logger,
) *rproxy.Server {
return rproxy.New(rproxy.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
})
}
// serveRProxy serves requests on listener until ctx is done, and then stops as
// RunRProxy says.
func serveRProxy(
ctx context.Context, server *rproxy.Server, listener net.Listener,
processLog *slog.Logger,
) int {
served := make(chan error, 1)
// newRProxyListener listens on SWW_RPROXY_LISTEN_ADDR.
func newRProxyListener(cfg *config.RProxy) (net.Listener, error) {
return listen(cfg.ListenAddr, "SWW_RPROXY_LISTEN_ADDR")
go func() {
served <- server.Serve(listener)
}()
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
server.WaitForReports()
processLog.Info("stopped")
return 0
}
+2 -5
View File
@@ -552,9 +552,7 @@ func TestAStatusWAFDoesNotTakeIsReportedAs599(t *testing.T) {
// startRProxyProcess runs `sww rproxy` in a process of its own, with the
// settings in env, each as NAME=value. It returns where rproxy listens and a
// function that sends rproxy SIGTERM and fails the test unless it exits with
// status 0 within waitLimit. It waits a minute for waf's answers unless env
// sets SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, so that a busy host cannot make it
// drop a question.
// status 0 within waitLimit.
func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
t.Helper()
@@ -570,8 +568,7 @@ func startRProxyProcess(t *testing.T, env ...string) (string, func()) {
cmd.Env = append(os.Environ(),
commandForMain+"=rproxy",
"SWW_RPROXY_LISTEN_ADDR="+localhost+":0",
wafBackendTimeout+"=60000")
"SWW_RPROXY_LISTEN_ADDR="+localhost+":0")
cmd.Env = append(cmd.Env, env...)
exited := startProcess(t, cmd)
+403 -2
View File
@@ -4,14 +4,17 @@
// stop, and then stops in an orderly way, writing the state and cache files.
// `sww rproxy` reads rproxy's settings alone, and runs the reverse proxy in
// front of one app that asks waf about each request. `sww healthcheck` is the
// container's health check. fx builds the parts of each daemon, starts their
// background work and stops it.
// container's health check.
package sww
import (
"context"
"errors"
"fmt"
"io"
"log/slog"
"net"
"net/http"
"os"
"os/signal"
"syscall"
@@ -19,9 +22,29 @@ import (
"github.com/spf13/viper"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// usageStatus is the exit status with no command, or one sww does not
// know.
const usageStatus = 2
@@ -87,3 +110,381 @@ func printUsage(w io.Writer) int {
return usageStatus
}
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. It returns the process's exit status, 1 when waf cannot start.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := requestlog.NewProcessLogger(params.Stdout,
config.InstanceName(params.Viper), slog.LevelError)
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, "invalid setting", err)
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = requestlog.NewProcessLogger(
stdout,
cfg.InstanceName,
cfg.LogLevel,
)
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
return runWAFWithSettings(
ctx,
params,
cfg,
stdout,
remote,
processLog,
)
}
// runWAFWithSettings is the rest of RunWAF once the settings are read and
// the process log goes where they say. remote is nil unless
// SWW_WAF_LOG_REMOTE_URL is set.
func runWAFWithSettings(
ctx context.Context,
params Params,
cfg *config.WAF,
stdout io.Writer,
remote *remotelog.Sender,
processLog *slog.Logger,
) int {
// The state files and the alerts give times in UTC.
now := func() time.Time { return time.Now().UTC() }
alertQueue := newAlertQueue(cfg, now, processLog)
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return cannotStart(processLog, "cannot use the rule files", err)
}
crs, err := waf.NewCoreRuleSet(cfg)
if err != nil {
return cannotStart(processLog, "cannot use the Core Rule Set", err)
}
server, err := newServer(
cfg,
stdout,
processLog,
now,
ruleFiles,
alertQueue,
crs,
params.BesideLookupTimeLimit,
)
if err != nil {
return cannotStart(processLog, "cannot use the lookup database", err)
}
if remote != nil {
server.Metrics.AddRemoteLog(remote)
}
files, err := loadStateFiles(cfg, server, alertQueue, now, processLog)
if err != nil {
return cannotStart(
processLog,
"cannot use the state and cache files",
err,
)
}
listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
if err != nil {
return cannotStart(
processLog,
"cannot listen on SWW_WAF_LISTEN_ADDR",
err,
)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
return serve(
ctx,
server,
listener,
files,
ruleFiles,
alertQueue,
processLog,
)
}
// cannotStart logs why waf cannot start, and returns its exit status.
func cannotStart(processLog *slog.Logger, message string, err error) int {
processLog.Error(message, "error", err.Error())
return 1
}
// newServer returns the server waf runs, with the metrics of the alerts,
// after reading the lookup database while SWW_WAF_LOOKUP_SOURCE is file. A lookup
// database that cannot be read is an error.
func newServer(
cfg *config.WAF, stdout io.Writer, processLog *slog.Logger,
now func() time.Time, ruleFiles *rules.Files, alertQueue *alerts.Queue,
crs *coreruleset.CoreRuleSet, besideLookupTimeLimit time.Duration,
) (*waf.Server, error) {
var lookupFile *lookup.File
if cfg.LookupSource == "file" {
var err error
lookupFile, err = lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, err
}
}
server := waf.New(waf.Params{
Config: cfg,
RequestLog: stdout,
ProcessLog: processLog,
GeoJSURL: geojs.URL,
AbuseIPDBURL: reputation.AbuseIPDBURL,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: besideLookupTimeLimit,
AbuseIPDBBlacklistURL: reputation.AbuseIPDBBlacklistURL,
})
server.Metrics.AddAlerts(alertQueue)
if lookupFile != nil {
server.Metrics.AddLookupFile(
lookupFile.LastRead,
lookupFile.ReadFailures,
)
}
return server, nil
}
// loadStateFiles reads the state and cache files into the parts of server and
// into alertQueue, as state.Load does.
func loadStateFiles(
cfg *config.WAF, server *waf.Server, alertQueue *alerts.Queue,
now func() time.Time, processLog *slog.Logger,
) (*state.Files, error) {
return state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: server.Ledger,
Limiter: server.Limiter,
GeoJS: server.GeoJS,
Lists: server.Lists,
DNSBL: server.DNSBL,
AbuseIPDB: server.AbuseIPDB,
RouteWatch: server.RouteWatch,
Alerts: alertQueue,
Anomalies: server.Anomalies,
Now: now,
ProcessLog: processLog,
Metrics: server.Metrics,
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them.
func newAlertQueue(
cfg *config.WAF, now func() time.Time, processLog *slog.Logger,
) *alerts.Queue {
return alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: now,
ProcessLog: processLog,
})
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
// serve serves requests on listener, writes the state and cache files as they
// are due, takes in an admin's edits of them, reads the rule files again as
// they change, and the lookup database when it is replaced, fetches the
// lists the settings name by URL as they are due, bans the clients on
// AbuseIPDB's blacklist as it is fetched, and sends the alerts,
// until ctx is done. Then it gives the requests in progress
// shutdownTimeout to finish, and writes every state and cache file,
// alerts.json with the alerts still waiting.
func serve(
ctx context.Context, server *waf.Server, listener net.Listener,
files *state.Files, ruleFiles *rules.Files, alertQueue *alerts.Queue,
processLog *slog.Logger,
) int {
served := make(chan error, 1)
go func() {
served <- server.Serve(listener)
}()
writing, stopWriting := context.WithCancel(ctx)
defer stopWriting()
written := inBackground(func() { files.Run(writing) })
watched := inBackground(func() { files.Watch(writing) })
rulesWatched := inBackground(func() { ruleFiles.Watch(writing) })
lookupFileWatched := inBackground(func() {
if server.LookupFile != nil {
server.LookupFile.Watch(writing)
}
})
listsFetched := inBackground(func() { server.Lists.Run(writing) })
blacklistFetched := inBackground(func() {
server.AbuseIPDB.RunBlacklist(writing)
})
alertsSent := inBackground(func() { alertQueue.Run(writing) })
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
// Run and Watch have ended, so nothing else reads or writes the
// files, and no alert is being sent, so that alerts.json keeps every
// alert not yet sent. Every request has ended too, but for one cut off
// because Shutdown timed out, which adds to its client's history only as
// it ends. That can be after this write, and then that request is missing
// from clients.json.
<-written
<-watched
<-rulesWatched
<-lookupFileWatched
<-listsFetched
<-blacklistFetched
<-alertsSent
err = files.WriteAll()
if err != nil {
processLog.Error(
"writing the state and cache files failed",
"error",
err.Error(),
)
return 1
}
processLog.Info("stopped")
return 0
}
// inBackground runs task on a goroutine of its own, and returns a channel
// that is closed once task has returned.
func inBackground(task func()) <-chan struct{} {
done := make(chan struct{})
go func() {
task()
close(done)
}()
return done
}
-505
View File
@@ -1,505 +0,0 @@
package sww
import (
"context"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. Then it gives the requests in progress shutdownTimeout to
// finish, ends its background work and writes every state and cache file,
// alerts.json with the alerts still waiting. It returns the process's exit
// status, 1 when waf cannot start or stop in order.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := requestlog.NewProcessLogger(params.Stdout,
config.InstanceName(params.Viper), slog.LevelError)
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, startError{"invalid setting", err})
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too. The sender runs before any part is built, so that it
// sends why waf cannot start.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = requestlog.NewProcessLogger(
stdout,
cfg.InstanceName,
cfg.LogLevel,
)
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
var (
files *state.Files
listener net.Listener
)
failed := make(servingFailed, 1)
app := fx.New(
fx.Supply(
params,
cfg,
processLog,
requestLog{stdout},
remote,
failed,
),
fx.Provide(
newAlertQueue, newRuleFiles, newCoreRuleSet, newLookupFile,
newLimiter, newLedger, newAnomalyCounters,
newLists, newDNSBL, newAbuseIPDB, newRouteWatch,
newMetrics, newGeoJS, newWAFServer,
func(server *waf.Server) *http.Server { return server.Server },
newWAFListener, newStateFiles,
),
// fx stops hooks in the reverse of the order they were added in. The
// state files are read before serving is set up, so that serving
// stops before their loops do.
fx.Populate(&files),
fx.Invoke(serve),
fx.Populate(&listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
if err != nil {
return cannotStart(processLog, err)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
// The last write follows the stop of every hook, and so the end of every
// loop that changes the state or raises an alert. A hook of the state
// files would stop before the loops of the parts built ahead of them.
return run(ctx, app, failed, processLog, func() error {
err := files.WriteAll()
if err != nil {
processLog.Error("writing the state and cache files failed",
"error", err.Error())
}
return err
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them. Until waf stops, it sends them.
func newAlertQueue(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
) *alerts.Queue {
alertQueue := alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: utcNow,
ProcessLog: processLog,
})
lc.Append(background(alertQueue.Run))
return alertQueue
}
// newRuleFiles reads the rule files, and reads them again as they change
// until waf stops.
func newRuleFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*rules.Files, error) {
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the rule files", err}
}
lc.Append(background(ruleFiles.Watch))
return ruleFiles, nil
}
// newCoreRuleSet returns the Core Rule Set, as waf.NewCoreRuleSet does.
func newCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
crs, err := waf.NewCoreRuleSet(cfg)
if err != nil {
return nil, startError{"cannot use the Core Rule Set", err}
}
return crs, nil
}
// newLookupFile reads the lookup database while SWW_WAF_LOOKUP_SOURCE is
// file, and reads it again when it is replaced until waf stops. It returns
// nil while the source is anything else.
func newLookupFile(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*lookup.File, error) {
if cfg.LookupSource != "file" {
return nil, nil //nolint:nilnil // no lookup database, and no error
}
lookupFile, err := lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the lookup database", err}
}
lc.Append(background(lookupFile.Watch))
return lookupFile, nil
}
// newLimiter returns the table of clients, with the rate and byte limits.
func newLimiter(cfg *config.WAF) *ratelimit.Limiter {
return ratelimit.New(ratelimit.Limits{
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
}, cfg.MaxTrackedClients)
}
// newLedger returns the ledger of the bans, with the settings for them.
func newLedger(cfg *config.WAF) *bans.Ledger {
return bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
}
// newAnomalyCounters returns the counters of the anomaly thresholds.
func newAnomalyCounters(
cfg *config.WAF, alertQueue *alerts.Queue,
) *anomaly.Counters {
return anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: alertQueue,
})
}
// newLists returns the lists the settings name by URL, none fetched yet.
// Until waf stops, it fetches them as they are due.
func newLists(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) *reputation.Lists {
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(lists.Run))
return lists
}
// newDNSBL returns what asks the DNSBL zones, none asked yet.
func newDNSBL(
cfg *config.WAF, processLog *slog.Logger, alertQueue *alerts.Queue,
) *reputation.DNSBL {
return reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
}
// newAbuseIPDB returns what checks clients with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, none checked yet. Until waf stops, it
// fetches AbuseIPDB's blacklist as it is due, and bans the clients on it in
// ledger, as waf.BanAbuseIPDBBlacklist says.
func newAbuseIPDB(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue, ledger *bans.Ledger,
) *reputation.AbuseIPDB {
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: reputation.AbuseIPDBURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: reputation.AbuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, utcNow(), listed,
)
},
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(abuseIPDB.RunBlacklist))
return abuseIPDB
}
// newRouteWatch returns what asks routewatch about clients, or nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
func newRouteWatch(
cfg *config.WAF, processLog *slog.Logger,
) *routewatch.Client {
if cfg.RouteWatchURL == "" {
return nil
}
return routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: utcNow,
ProcessLog: processLog,
})
}
// newMetrics returns the metrics, with those read from the other parts as
// the metrics are asked for: AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set,
// the lookup database's while there is one, and the remote log sender's
// while there is one.
func newMetrics(
cfg *config.WAF, ledger *bans.Ledger, limiter *ratelimit.Limiter,
ruleFiles *rules.Files, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
alertQueue *alerts.Queue, lookupFile *lookup.File,
remote *remotelog.Sender,
) *metrics.Metrics {
m := metrics.New(cfg.MetricsBusiestCountriesAndASNs, cfg.InstanceName)
m.AddBansAndClients(ledger, limiter, utcNow)
m.AddRules(ruleFiles)
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
m.AddAlerts(alertQueue)
if lookupFile != nil {
m.AddLookupFile(lookupFile.LastRead, lookupFile.ReadFailures)
}
if remote != nil {
m.AddRemoteLog(remote)
}
return m
}
// newGeoJS returns what looks clients up at GeoJS, none looked up yet. Each
// answer goes to the limiter and the ledger, as waf.AddLookup says, and each
// failure is handled as waf.GeoJSFailed says.
func newGeoJS(
cfg *config.WAF, m *metrics.Metrics, limiter *ratelimit.Limiter,
ledger *bans.Ledger, alertQueue *alerts.Queue, processLog *slog.Logger,
) *geojs.GeoJS {
return geojs.New(geojs.Params{
URL: geojs.URL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: utcNow,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
}
// newWAFServer returns the server waf runs, with its parts and the time
// limit params gives.
func newWAFServer(
params Params, cfg *config.WAF, out requestLog, processLog *slog.Logger,
m *metrics.Metrics, limiter *ratelimit.Limiter, ledger *bans.Ledger,
anomalies *anomaly.Counters, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
routeWatch *routewatch.Client, geoJS *geojs.GeoJS,
lookupFile *lookup.File, crs *coreruleset.CoreRuleSet,
ruleFiles *rules.Files, alertQueue *alerts.Queue,
) *waf.Server {
return waf.New(waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
Metrics: m,
Limiter: limiter,
Ledger: ledger,
Anomalies: anomalies,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
GeoJS: geoJS,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: utcNow,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: params.BesideLookupTimeLimit,
})
}
// newWAFListener listens on SWW_WAF_LISTEN_ADDR.
func newWAFListener(cfg *config.WAF) (net.Listener, error) {
return listen(cfg.ListenAddr, "SWW_WAF_LISTEN_ADDR")
}
// newStateFiles reads the state and cache files into the parts and the
// alert queue, as state.Load does. Until waf stops, it writes them as they
// are due and takes in an admin's edits of them.
func newStateFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
m *metrics.Metrics, ledger *bans.Ledger, limiter *ratelimit.Limiter,
geoJS *geojs.GeoJS, lists *reputation.Lists, dnsbl *reputation.DNSBL,
abuseIPDB *reputation.AbuseIPDB, routeWatch *routewatch.Client,
alertQueue *alerts.Queue, anomalies *anomaly.Counters,
) (*state.Files, error) {
files, err := state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: ledger,
Limiter: limiter,
GeoJS: geoJS,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
Alerts: alertQueue,
Anomalies: anomalies,
Now: utcNow,
ProcessLog: processLog,
Metrics: m,
})
if err != nil {
return nil, startError{"cannot use the state and cache files", err}
}
lc.Append(background(files.Run))
lc.Append(background(files.Watch))
return files, nil
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
+1 -4
View File
@@ -90,8 +90,6 @@ func TestMainRunsWAF(t *testing.T) {
cmd := exec.CommandContext(t.Context(), binary)
cmd.Stdout = out
// The Core Rule Set is off. Main keeps waf's own limit for its checks,
// and on a busy host the Core Rule Set's inspection can pass it.
cmd.Env = append(os.Environ(),
"TZ="+zone,
commandForMain+"="+wafCommand,
@@ -99,8 +97,7 @@ func TestMainRunsWAF(t *testing.T) {
stateDir+"="+dir,
cacheDir+"="+dir,
ruleFilesDir+"="+t.TempDir(),
lookupSource+"=off",
"SWW_WAF_CORE_RULE_SET_MODE=off")
lookupSource+"=off")
exited := startProcess(t, cmd)
+1 -1
View File
@@ -35,7 +35,7 @@ func (abuseIPDB) check(
return nil
}
client := clientGroup(rq.h.config, rq.client)
client := rq.h.clientGroup(rq.client)
held, _ := rq.h.limiter.Client(client)
offender := held.History.Offences != ratelimit.Offences{}
+12 -19
View File
@@ -4,41 +4,34 @@ package waf
// SWW_WAF_MODE; the blacklist is fetched by the reputation package.
import (
"log/slog"
"net/netip"
"time"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// BanAbuseIPDBBlacklist bans in ledger the netblock of each client on
// AbuseIPDB's blacklist, listed, for SWW_WAF_ABUSEIPDB_BAN_DAYS from now, as
// the ledger's BanForAbuseIPDB describes. It logs to processLog how many
// clients were listed and how many bans were made. Clients in one netblock
// make one ban, with the highest of their scores. In observe mode it makes
// no ban.
func BanAbuseIPDBBlacklist(
cfg *config.WAF, ledger *bans.Ledger, processLog *slog.Logger,
now time.Time, listed []reputation.BlacklistEntry,
) {
// banAbuseIPDBBlacklist bans the netblock of each client on AbuseIPDB's
// blacklist, listed, for SWW_WAF_ABUSEIPDB_BAN_DAYS, as the ledger's
// BanForAbuseIPDB describes, and logs how many clients were listed and how
// many bans were made. Clients in one netblock make one ban, with the
// highest of their scores. In observe mode it makes no ban.
func (h *handler) banAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) {
scores := make(map[netip.Prefix]int64, len(listed))
for _, client := range listed {
netblock := banNetblock(cfg, client.Addr)
netblock := h.netblock(client.Addr)
scores[netblock] = max(scores[netblock], client.Score)
}
made := 0
if !cfg.Observe {
made = ledger.BanForAbuseIPDB(
now, now.Add(cfg.AbuseIPDBBanDuration), scores,
if !h.config.Observe {
now := h.now()
made = h.ledger.BanForAbuseIPDB(
now, now.Add(h.config.AbuseIPDBBanDuration), scores,
)
}
processLog.Info(
h.processLog.Info(
"fetched AbuseIPDB's blacklist",
"clients", len(listed),
"bans_made", made,
+5 -5
View File
@@ -139,7 +139,7 @@ func (rq *request) addBan() {
)
if err == nil {
netblock, err = rq.h.parseBanNetblock(toAdd.Netblock)
netblock, err = rq.h.banNetblock(toAdd.Netblock)
}
if err == nil {
@@ -190,12 +190,12 @@ func (rq *request) readBanToAdd() (banToAdd, error) {
return toAdd, nil
}
// parseBanNetblock reads value, a netblock such as 203.0.113.0/24, or a
// banNetblock reads value, a netblock such as 203.0.113.0/24, or a
// client's address, which stands for the netblock a ban on that client
// covers. An IPv4-mapped netblock, such as ::ffff:203.0.113.0/120, is
// refused, since a client's address is looked up as IPv4 and a ban on it
// would refuse nothing, and so is a value with a zone.
func (h *handler) parseBanNetblock(value string) (netip.Prefix, error) {
func (h *handler) banNetblock(value string) (netip.Prefix, error) {
netblock, err := netip.ParsePrefix(value)
if err == nil {
if netblock.Addr().Is4In6() {
@@ -224,7 +224,7 @@ func (h *handler) parseBanNetblock(value string) (netip.Prefix, error) {
return netip.Prefix{}, fmt.Errorf("netblock %q %w", value, errZone)
}
return banNetblock(h.config, addr), nil
return h.netblock(addr), nil
}
// expiry returns when a ban made at now for duration ends: duration
@@ -295,7 +295,7 @@ func (rq *request) showClient() {
Bans: state.BanEntries(rq.h.ledger.Covering(addr)),
}
client, seen := rq.h.limiter.Client(clientGroup(rq.h.config, addr))
client, seen := rq.h.limiter.Client(rq.h.clientGroup(addr))
if seen {
answer.Client = &client
}
+12 -7
View File
@@ -877,13 +877,18 @@ func TestWAFAnswersWithinTheTimeLimitWhileEveryOutsideSourceHangs(
held, _, _ := startHeldGeoJS(t)
resolver, releaseResolver := startHeldResolver(t)
server, out, _ := newWAFWith(t, waf.New,
silentGeoJSURL, silentAbuseIPDBURL, time.Now, map[string]string{
tagDeny: "country=KP", coreRuleSetMode: block,
dnsblZones: dnsblZone, dnsblResolver: resolver,
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt",
})
server, out, _ := newWAFWith(t, func(
params waf.Params,
) *waf.Server {
params.AbuseIPDBURL = silentAbuseIPDBURL
return waf.New(params)
}, silentGeoJSURL, time.Now, map[string]string{
tagDeny: "country=KP", coreRuleSetMode: block,
dnsblZones: dnsblZone, dnsblResolver: resolver,
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt",
})
// The lists are fetched outside the synctest bubble below: a wait on the
// network inside it would keep its clock from moving on.
+7 -8
View File
@@ -10,7 +10,6 @@ import (
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
@@ -122,7 +121,7 @@ func (rq *request) banForLimit(
rq.line.Offence = requestlog.OffenceLimit
rq.h.metrics.LimitHit(hit)
netblock := banNetblock(rq.h.config, rq.client)
netblock := rq.h.netblock(rq.client)
if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseLimit) {
return
@@ -158,7 +157,7 @@ func (rq *request) banForLimit(
}
ban, made := rq.h.ledger.BanForLimit(netblock, now, notes)
rq.h.limiter.Reset(clientGroup(rq.h.config, rq.client))
rq.h.limiter.Reset(rq.h.clientGroup(rq.client))
rq.line.BanExpires = banExpires(ban)
if made {
@@ -172,7 +171,7 @@ func (rq *request) banForLimit(
// no ban, and raises the alert for the ban it would have made, if that
// alert would be sent. It returns the action for that ban.
func (rq *request) banForAttack(now time.Time, notes bans.Notes) string {
netblock := banNetblock(rq.h.config, rq.client)
netblock := rq.h.netblock(rq.client)
if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseAttack) {
return banAction(
@@ -274,16 +273,16 @@ func (rq *request) netblockRequests(netblock netip.Prefix) int64 {
return rq.h.limiter.Requests(netblock) + 1
}
// banNetblock is the netblock a ban on client covers: its IPv4 address,
// netblock is the netblock a ban on client covers: its IPv4 address,
// widened to SWW_WAF_BAN_SCOPE_V4_PREFIX, or the IPv6 group clientGroup
// counts it in.
func banNetblock(cfg *config.WAF, client netip.Addr) netip.Prefix {
func (h *handler) netblock(client netip.Addr) netip.Prefix {
addr := client.Unmap()
if addr.Is4() {
return netip.PrefixFrom(addr, cfg.BanScopeV4Prefix).Masked()
return netip.PrefixFrom(addr, h.config.BanScopeV4Prefix).Masked()
}
return clientGroup(cfg, addr)
return h.clientGroup(addr)
}
// banExpires is when ban ends, as the log line gives it: a time, or
+1 -1
View File
@@ -76,7 +76,7 @@ func newWAFHoldingTheCoreRuleSet(
params.BesideLookupTimeLimit = waf.BesideLookupTimeLimit
return waf.New(params)
}, silentGeoJSURL, abuseIPDBURL, time.Now, settings)
}, silentGeoJSURL, time.Now, settings)
return server, out, queue
}
+1 -1
View File
@@ -30,7 +30,7 @@ func (byteLimits) check(
}
counts, hit, over := rq.h.limiter.CountBytes(
clientGroup(rq.h.config, rq.client),
rq.h.clientGroup(rq.client),
now,
rq.countedBytes(),
rq.bytesLimitPercent.percent,
+2 -4
View File
@@ -5,8 +5,6 @@ import (
"net/http"
"net/netip"
"slices"
"sneak.berlin/go/smallwebwaf/internal/config"
)
// peerAddress is the address of the request's TCP peer.
@@ -47,10 +45,10 @@ func scheme(r *http.Request, isQuestion bool) string {
// address, or its IPv6 group, the netblock its IPv6 address is in of the
// length SWW_WAF_IPV6_GROUP_PREFIX sets, a /64 by default, since one abuser
// usually holds a whole /64. An IPv4 address in IPv6 form counts as IPv4.
func clientGroup(cfg *config.WAF, addr netip.Addr) netip.Prefix {
func (h *handler) clientGroup(addr netip.Addr) netip.Prefix {
addr = addr.Unmap()
if addr.Is6() {
return netip.PrefixFrom(addr, cfg.IPv6GroupPrefix).Masked()
return netip.PrefixFrom(addr, h.config.IPv6GroupPrefix).Masked()
}
return netip.PrefixFrom(addr, addr.BitLen())
+1 -1
View File
@@ -108,7 +108,7 @@ func (rq *request) alertCoreRuleSetMatch(result coreruleset.Result) {
Event: alerts.EventCoreRuleSetMatch,
Host: rq.site,
Client: rq.client,
Netblock: clientGroup(rq.h.config, rq.client),
Netblock: rq.h.clientGroup(rq.client),
ASN: rq.line.ASN,
ASName: rq.line.ASName,
Country: rq.line.Country,
+1 -1
View File
@@ -9,5 +9,5 @@ const BesideLookupTimeLimit = besideLookupTimeLimit
// the clients on listed does.
func (s *Server) BanAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) {
h := s.Handler.(*handler) //nolint:forcetypeassert // New makes it one
BanAbuseIPDBBlacklist(h.config, h.ledger, h.processLog, h.now(), listed)
h.banAbuseIPDBBlacklist(listed)
}
+13 -25
View File
@@ -2,18 +2,14 @@ package waf
import (
"context"
"log/slog"
"net/http"
"net/netip"
"strings"
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
)
// The headers in which an answer of allow gives rproxy the client's AS number
@@ -55,7 +51,7 @@ func (rq *request) startLookUp(
return result
}
client := clientGroup(rq.h.config, rq.client)
client := rq.h.clientGroup(rq.client)
if rq.h.config.LookupSource == "file" {
result <- lookupResult{
@@ -132,30 +128,22 @@ func countryTag(country string) string {
return config.CountryTagPrefix + country
}
// AddLookup adds answer, an answer about a client from the lookup database
// or GeoJS, to the client's history in limiter, and to the notes of the bans
// in ledger on its netblock that have no AS number, AS name or country yet.
// cfg sets the netblock's size.
func AddLookup(
cfg *config.WAF, limiter *ratelimit.Limiter, ledger *bans.Ledger,
answer geojs.Answer,
) {
limiter.AddLookup(answer.Client, answer.Answered,
// addLookup adds answer, an answer about a client from the lookup
// database or GeoJS, to the client's history, and to the notes of the bans
// on its netblock that have no AS number, AS name or country yet.
func (h *handler) addLookup(answer geojs.Answer) {
h.limiter.AddLookup(answer.Client, answer.Answered,
answer.ASN, answer.ASName, answer.Country)
ledger.AddLookup(banNetblock(cfg, answer.Client.Addr()),
h.ledger.AddLookup(h.netblock(answer.Client.Addr()),
answer.ASN, answer.ASName, answer.Country)
}
// GeoJSFailed logs a failure of GeoJS to processLog, raises a
// source_failure alert for it on alertQueue and counts it in m.
// askingAgainIn is how long GeoJS is left alone after it.
func GeoJSFailed(
processLog *slog.Logger, alertQueue *alerts.Queue, m *metrics.Metrics,
err error, askingAgainIn time.Duration,
) {
processLog.Warn("asking GeoJS failed",
// geojsFailed logs a failure of GeoJS, raises a source_failure alert for it
// and counts it. askingAgainIn is how long GeoJS is left alone after it.
func (h *handler) geojsFailed(err error, askingAgainIn time.Duration) {
h.processLog.Warn("asking GeoJS failed",
"error", err.Error(), "asking_again_in", askingAgainIn.String())
alertQueue.Raise(alerts.Alert{
h.alerts.Raise(alerts.Alert{
Event: alerts.EventSourceFailure,
Reason: "asking GeoJS failed",
Detail: map[string]any{
@@ -163,7 +151,7 @@ func GeoJSFailed(
"asking_again_in": askingAgainIn.String(),
},
})
m.GeoJSFailures.Inc()
h.metrics.GeoJSFailures.Inc()
}
// setLookupHeaders sets the headers that give the client's AS number and
+126 -47
View File
@@ -58,28 +58,16 @@ type Params struct {
RequestLog io.Writer
// ProcessLog receives the process's own messages.
ProcessLog *slog.Logger
// Metrics count what waf does. Whoever builds them adds the metrics
// read from the other parts.
Metrics *metrics.Metrics
// Limiter is the table of clients the rate limits count, with each
// client's history.
Limiter *ratelimit.Limiter
// Ledger holds the bans.
Ledger *bans.Ledger
// Anomalies are the counters of the anomaly thresholds.
Anomalies *anomaly.Counters
// Lists are the lists fetched from URLs, DNSBL the DNSBL zones'
// verdicts, and AbuseIPDB AbuseIPDB's scores and the checks spent.
Lists *reputation.Lists
DNSBL *reputation.DNSBL
AbuseIPDB *reputation.AbuseIPDB
// RouteWatch asks routewatch about clients, and is nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
RouteWatch *routewatch.Client
// GeoJS looks clients' AS numbers and countries up while
// SWW_WAF_LOOKUP_SOURCE is geojs. It is given AddLookup as its Answered
// and GeoJSFailed as its Failed.
GeoJS *geojs.GeoJS
// GeoJSURL is where clients' AS numbers and countries are looked up
// while SWW_WAF_LOOKUP_SOURCE is geojs, normally geojs.URL.
GeoJSURL string
// AbuseIPDBURL is where clients are checked with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, normally reputation.AbuseIPDBURL.
AbuseIPDBURL string
// AbuseIPDBBlacklistURL is where AbuseIPDB's blacklist is fetched from
// while SWW_WAF_ABUSEIPDB_KEY is set, normally
// reputation.AbuseIPDBBlacklistURL.
AbuseIPDBBlacklistURL string
// LookupFile is the lookup database they are looked up in while
// SWW_WAF_LOOKUP_SOURCE is file, and nil otherwise.
LookupFile *lookup.File
@@ -116,8 +104,11 @@ type CoreRuleSetInspector interface {
) (coreruleset.Result, []byte, error)
}
// Server is the server waf runs, with the parts of its Params. The tests
// read them.
// Server is the server waf runs, with the parts whose state the state
// files keep, the lookup database, nil unless SWW_WAF_LOOKUP_SOURCE is file, the
// lists fetched from URLs, which its Run fetches, the DNSBL zones' verdicts,
// AbuseIPDB's scores and checks spent, routewatch's answers, and the metrics.
// RouteWatch is nil while SWW_WAF_ROUTEWATCH_URL is unset.
type Server struct {
*http.Server
@@ -133,45 +124,133 @@ type Server struct {
Metrics *metrics.Metrics
}
// newHandler returns the handler with what every request shares, the parts
// in params among it.
// newHandler returns the handler with what every request shares, as the
// settings in params make it.
func newHandler(params Params) *handler {
m := metrics.New(
params.Config.MetricsBusiestCountriesAndASNs,
params.Config.InstanceName,
)
awaitingReport, err := lru.New[string, *decision](maxAwaitingReport)
if err != nil {
panic(err) // New fails only for a size below one
}
return &handler{
h := &handler{
config: params.Config,
requestLog: params.RequestLog,
processLog: params.ProcessLog,
now: params.Now,
metrics: params.Metrics,
metrics: m,
awaitingReport: awaitingReport,
limiter: params.Limiter,
ledger: params.Ledger,
geojs: params.GeoJS,
anomalies: params.Anomalies,
lookupFile: params.LookupFile,
lists: params.Lists,
dnsbl: params.DNSBL,
abuseIPDB: params.AbuseIPDB,
routeWatch: params.RouteWatch,
rules: params.Rules,
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
// The country list, the headers, the tag settings that name an asn=
// or country= tag and the biased thresholds act on the answer before
// the request goes on.
waitForGeoJS: len(params.Config.ExclusivelyAllowedCountries) > 0 ||
params.Config.AddLookupHeaders ||
params.Config.TagsNeedLookup() ||
biasedThresholdsSet(params.Config),
limiter: ratelimit.New(ratelimit.Limits{
PerMinute: params.Config.RateLimitPerMinute,
PerHour: params.Config.RateLimitPerHour,
PerDay: params.Config.RateLimitPerDay,
BytesPerMinute: params.Config.BytesLimitPerMinute,
BytesPerHour: params.Config.BytesLimitPerHour,
BytesPerDay: params.Config.BytesLimitPerDay,
}, params.Config.MaxTrackedClients),
ledger: bans.New(bans.Params{
LimitBanDuration: params.Config.LimitBanDuration,
LimitBanRepeatWindow: params.Config.LimitBanRepeatWindow,
LimitBanPermanentAbove: params.Config.LimitBanPermanentAbove,
AttackBanDuration: params.Config.AttackBanDuration,
MaxBans: params.Config.MaxBans,
}),
anomalies: anomaly.New(anomaly.Params{
Client: params.Config.AnomalyClient,
Net: params.Config.AnomalyNet,
ASN: params.Config.AnomalyASN,
Total: params.Config.AnomalyTotal,
WatchedNet: params.Config.AnomalyWatchedNet,
NetV4Prefix: params.Config.AnomalyNetV4Prefix,
NetV6Prefix: params.Config.AnomalyNetV6Prefix,
NamedNetblocks: params.Config.AnomalyWatchedNets,
Alerts: params.Alerts,
}),
lookupFile: params.LookupFile,
rules: params.Rules,
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
besideLookupLimit: cmp.Or(
params.BesideLookupTimeLimit,
besideLookupTimeLimit,
),
}
h.lists, h.dnsbl, h.abuseIPDB = newReputation(
params, m, h.banAbuseIPDBBlacklist,
)
if params.Config.RouteWatchURL != "" {
h.routeWatch = routewatch.New(routewatch.Params{
URL: params.Config.RouteWatchURL, Now: params.Now, ProcessLog: params.ProcessLog,
})
}
// The country list, the headers, the tag settings that name an asn= or
// country= tag and the biased thresholds act on the answer before the
// request goes on.
h.waitForGeoJS = len(params.Config.ExclusivelyAllowedCountries) > 0 ||
params.Config.AddLookupHeaders || params.Config.TagsNeedLookup() ||
biasedThresholdsSet(params.Config)
h.geojs = geojs.New(geojs.Params{
URL: params.GeoJSURL,
Answered: h.addLookup,
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: h.geojsFailed,
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddBansAndClients(h.ledger, h.limiter, params.Now)
m.AddRules(params.Rules)
return h
}
// newReputation returns the lists fetched from URLs, the DNSBL zones'
// verdicts and AbuseIPDB's scores, as the settings in params name them,
// with none fetched, asked for or checked yet, and adds their metrics to
// m, AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set. blacklisted receives
// the clients on each AbuseIPDB blacklist fetched.
func newReputation(
params Params, m *metrics.Metrics,
blacklisted func([]reputation.BlacklistEntry),
) (*reputation.Lists, *reputation.DNSBL, *reputation.AbuseIPDB) {
cfg := params.Config
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
dnsbl := reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones, Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: params.AbuseIPDBURL, Key: cfg.AbuseIPDBKey, MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget, CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, BlacklistURL: params.AbuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold, BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: blacklisted, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
return lists, dnsbl, abuseIPDB
}
// NewCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
+16 -150
View File
@@ -16,17 +16,10 @@ import (
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rproxy"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/waf"
@@ -443,15 +436,13 @@ func newWAF(
) (*waf.Server, *output, *alerts.Queue) {
t.Helper()
return newWAFWith(t, waf.New, geojsURL, abuseIPDBURL, now, env)
return newWAFWith(t, waf.New, geojsURL, now, env)
}
// newWAFWith is newWAF for the server build makes, with clients checked with
// AbuseIPDB at abuseIPDBCheckURL.
// newWAFWith is newWAF for the server build makes.
func newWAFWith(
t *testing.T, build func(waf.Params) *waf.Server,
geojsURL, abuseIPDBCheckURL string, now func() time.Time,
env map[string]string,
geojsURL string, now func() time.Time, env map[string]string,
) (*waf.Server, *output, *alerts.Queue) {
t.Helper()
@@ -509,151 +500,26 @@ func newWAFWith(
t.Fatalf("Core Rule Set: %v", err)
}
params := waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
LookupFile: lookupFile,
CoreRuleSet: coreRuleSet,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
server := build(waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
GeoJSURL: geojsURL,
AbuseIPDBURL: abuseIPDBURL,
LookupFile: lookupFile,
CoreRuleSet: coreRuleSet,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
// The tests of the limit set it back, and hold the Core Rule Set
// with a stand-in.
BesideLookupTimeLimit: time.Hour,
}
addCounters(&params)
addOutsideSources(&params, geojsURL, abuseIPDBCheckURL)
server := build(params)
AbuseIPDBBlacklistURL: abuseIPDBBlacklistURL,
})
return server, out, alertQueue
}
// addCounters adds to params the metrics, the table of clients, the ledger
// and the anomaly counters, as sww builds them from params' settings. The
// metrics read the ledger, the table of clients and the rules.
func addCounters(params *waf.Params) {
cfg := params.Config
params.Metrics = metrics.New(
cfg.MetricsBusiestCountriesAndASNs,
cfg.InstanceName,
)
params.Limiter = ratelimit.New(ratelimit.Limits{
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
}, cfg.MaxTrackedClients)
params.Ledger = bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
params.Anomalies = anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: params.Alerts,
})
params.Metrics.AddBansAndClients(
params.Ledger,
params.Limiter,
params.Now,
)
params.Metrics.AddRules(params.Rules)
}
// addOutsideSources adds to params the lists fetched from URLs, the DNSBL
// zones' verdicts, AbuseIPDB's scores from abuseIPDBCheckURL and its
// blacklist from abuseIPDBBlacklistURL, routewatch's answers while its
// setting is set, and GeoJS at geojsURL, as sww builds
// them from params' settings and the parts addCounters added. The metrics
// read the lists, the zones' verdicts, and AbuseIPDB's while its key is set.
func addOutsideSources(
params *waf.Params, geojsURL, abuseIPDBCheckURL string,
) {
cfg := params.Config
m, limiter, ledger := params.Metrics, params.Limiter, params.Ledger
processLog, alertQueue := params.ProcessLog, params.Alerts
params.Lists = reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.DNSBL = reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.AbuseIPDB = reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: abuseIPDBCheckURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: abuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, params.Now(), listed,
)
},
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if cfg.RouteWatchURL != "" {
params.RouteWatch = routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: params.Now,
ProcessLog: processLog,
})
}
params.GeoJS = geojs.New(geojs.Params{
URL: geojsURL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddReputation(params.Lists, params.DNSBL)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(params.AbuseIPDB)
}
}
// newClient returns an HTTP client that sends requests as they are made,
// with no compression of its own.
func newClient(t *testing.T) *http.Client {
+3 -6
View File
@@ -38,11 +38,8 @@ func (rateLimits) check(
rq.line.BytesLimitPercent, rq.line.BytesLimitPercentSetting =
rq.bytesLimitPercent.logged()
counts, hit, over := rq.h.limiter.Count(
clientGroup(rq.h.config, rq.client),
now,
rq.rateLimitPercent.percent,
)
counts, hit, over := rq.h.limiter.Count(rq.h.clientGroup(rq.client), now,
rq.rateLimitPercent.percent)
rq.line.Counts = counts
if !over {
@@ -62,7 +59,7 @@ func (rateLimits) check(
// limit. It counts nothing.
func (rq *request) overAWholeRateLimit(now time.Time) bool {
return rq.countedByRateLimits() &&
rq.h.limiter.OverARateLimit(clientGroup(rq.h.config, rq.client), now)
rq.h.limiter.OverARateLimit(rq.h.clientGroup(rq.client), now)
}
// countedByRateLimits reports whether the rate limits count the request: its
+2 -5
View File
@@ -36,11 +36,8 @@ func (refusalLimit) check(
return nil
}
hit, over := rq.h.limiter.CountRefusal(
clientGroup(rq.h.config, rq.client),
now,
cfg.RefusalsLimitPerMinute,
)
hit, over := rq.h.limiter.CountRefusal(rq.h.clientGroup(rq.client), now,
cfg.RefusalsLimitPerMinute)
if !over {
return nil
}
+1 -1
View File
@@ -37,7 +37,7 @@ func (rq *request) noteHit(hit bans.ReputationHit, reason string) {
Event: alerts.EventReputationHit,
Host: rq.site,
Client: rq.client,
Netblock: clientGroup(rq.h.config, rq.client),
Netblock: rq.h.clientGroup(rq.client),
ASN: rq.line.ASN,
ASName: rq.line.ASName,
Country: rq.line.Country,
+5 -5
View File
@@ -122,7 +122,7 @@ func (h *handler) startRequest(
RequestID: requestID(r, isQuestion),
PeerIP: peer.String(),
ForwardedFor: strings.Join(forwardedFor, ", "),
ClientGroup: clientGroup(h.config, client).String(),
ClientGroup: h.clientGroup(client).String(),
ContentType: r.Header.Get("Content-Type"),
RequestHeaders: requestHeaders(
r,
@@ -365,7 +365,7 @@ func (rq *request) addToHistory() {
}
rq.h.limiter.AddToHistory(
clientGroup(rq.h.config, rq.client),
rq.h.clientGroup(rq.client),
rq.h.now(),
request,
)
@@ -373,7 +373,7 @@ func (rq *request) addToHistory() {
answer, found := rq.answerAtTheEnd()
if found {
AddLookup(rq.h.config, rq.h.limiter, rq.h.ledger, answer)
rq.h.addLookup(answer)
}
}
@@ -394,7 +394,7 @@ func (rq *request) countAnomalies() {
rq.h.anomalies.Count(rq.h.now(), anomaly.Request{
Host: rq.site,
Client: rq.client,
ClientGroup: clientGroup(rq.h.config, rq.client),
ClientGroup: rq.h.clientGroup(rq.client),
ASN: answer.ASN,
ASName: answer.ASName,
Country: answer.Country,
@@ -425,7 +425,7 @@ func (rq *request) answerAtTheEnd() (geojs.Answer, bool) {
return rq.lookupAnswer, true
}
return rq.h.geojs.Kept(clientGroup(rq.h.config, rq.client))
return rq.h.geojs.Kept(rq.h.clientGroup(rq.client))
}
// responseWriter is waf's answer to a request. It notes the status and
+1 -1
View File
@@ -32,7 +32,7 @@ func (routeWatchTags) check(
route, missing := rq.h.routeWatch.Route(
ctx,
clientGroup(rq.h.config, rq.client),
rq.h.clientGroup(rq.client),
rq.client,
)
if missing != "" {