Compare commits

..
Author SHA1 Message Date
clawbot 6dd46638a2 dirwatch, lookup: one test below the synctest comment ran outside a bubble
check / check (push) Waiting to run
In both test files the comment said every test below it runs in a
synctest bubble, but one did not. That test now sits above the comment.

Model: opus-5-5
2026-11-19 19:43:29 +00:00
clawbot 09260591c8 README: list internal/dirwatch under Packages
The list named every package but the new one.

Model: opus-5-5
2026-11-19 19:43:23 +00:00
clawbot 13e4cdcf24 dirwatch: one loop that watches a directory, for rules and lookup (closes #429)
check / check (push) Waiting to run
rules and lookup each had the same loop: watch the directory, start a
timer at once, restart it at each change that counts, read again when it
fires. It now lives once in internal/dirwatch, with its quiet time and
its tests. Each package keeps its own log messages, its readAgain, and
its test for which changes count. internal/state keeps its own copy.

Model: opus-5-5
2026-11-19 19:23:59 +00:00
clawbot 419ee1c441 No part imports config (closes #447)
check / check (push) Waiting to run
TagList, MaskZoneKey, ParseNetblock, ParseASN and ParsePercent move
from config to reputation; config imports them from there. rules and
config check header names with httpguts.ValidHeaderFieldName, and
IsHeaderName goes. A new test pins that check to the characters
IsHeaderName took, for the empty name and every single-byte name.

Model: opus-5-5
2026-11-19 20:14:27 +01:00
18 changed files with 565 additions and 609 deletions

No files matched your search

+2
View File
@@ -906,6 +906,8 @@ stops the running process (see [`docs/state-files.md`](docs/state-files.md)).
`internal/coreruleset`, `internal/geojs`, `internal/lookup`,
`internal/reputation`, `internal/routewatch`, `internal/anomaly` and
`internal/alerts`: one check or source each.
- `internal/dirwatch`: watches a directory, so that `internal/rules` and
`internal/lookup` read their files again when they change.
- `internal/state`, `internal/requestlog`, `internal/remotelog` and
`internal/metrics`: the state and cache files, the log lines, the syslog
sender and the metrics.
+3
View File
@@ -93,6 +93,9 @@ never as a time.
imports no other package of this repository: `waf` gives it what it needs
to count and report failures.
- `internal/lookup`: looks clients up in the lookup database.
- `internal/dirwatch`: watches a directory, and calls a function once it has
gone a short time without a change. `internal/rules` and `internal/lookup`
read their files again this way.
- `internal/reputation`: fetches the lists, asks the DNS blocklists and
AbuseIPDB in the background, and keeps their answers. It also fetches
AbuseIPDB's blacklist, which `internal/waf` bans.
+1 -1
View File
@@ -13,6 +13,7 @@ require (
github.com/prometheus/client_golang v1.24.1
github.com/spf13/viper v1.21.0
go.uber.org/fx v1.24.0
golang.org/x/net v0.60.0
golang.org/x/sys v0.48.0
)
@@ -50,7 +51,6 @@ require (
go.uber.org/zap v1.26.0 // indirect
go.yaml.in/yaml/v3 v3.0.5 // indirect
go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect
golang.org/x/net v0.60.0 // indirect
golang.org/x/sync v0.23.0 // indirect
golang.org/x/text v0.42.0 // indirect
google.golang.org/protobuf v1.36.11 // indirect
+4 -25
View File
@@ -19,6 +19,8 @@ import (
"time"
"github.com/spf13/viper"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// off is the value that switches a timeout, a size limit or a rate limit
@@ -40,9 +42,7 @@ var (
errNotPositive = errors.New("must be more than zero, or off")
errNotMilliseconds = errors.New(
"is not a whole number of milliseconds above zero, such as 2000")
errEmptyItem = errors.New("has an empty item in its list")
errNotNetblock = errors.New(
"is not a netblock such as 10.0.0.0/8, or an address")
errEmptyItem = errors.New("has an empty item in its list")
errNotListenAddr = errors.New(
"is not an address to listen on, such as :8080")
errNotCommand = errors.New("is not rproxy or waf")
@@ -253,7 +253,7 @@ func parseNetblocks(value string) ([]netip.Prefix, error) {
netblocks := make([]netip.Prefix, 0, len(items))
for _, item := range items {
netblock, err := ParseNetblock(item)
netblock, err := reputation.ParseNetblock(item)
if err != nil {
return nil, err
}
@@ -264,27 +264,6 @@ func parseNetblocks(value string) ([]netip.Prefix, error) {
return netblocks, nil
}
// ParseNetblock reads a netblock in CIDR form, such as 10.0.0.0/8. A bare
// address is a netblock of that address alone, a /32 or a /128. A
// blocklist's lines are read with it too.
func ParseNetblock(value string) (netip.Prefix, error) {
if strings.Contains(value, "/") {
netblock, err := netip.ParsePrefix(value)
if err != nil {
return netip.Prefix{}, fmt.Errorf("%q %w", value, errNotNetblock)
}
return netblock.Masked(), nil
}
addr, err := netip.ParseAddr(value)
if err != nil || addr.Zone() != "" {
return netip.Prefix{}, fmt.Errorf("%q %w", value, errNotNetblock)
}
return netip.PrefixFrom(addr, addr.BitLen()), nil
}
// parseListenAddr checks an address to listen on: an optional host and a
// port number.
func parseListenAddr(value string) (string, error) {
+47 -104
View File
@@ -20,11 +20,13 @@ import (
"unicode/utf8"
"github.com/spf13/viper"
"golang.org/x/net/http/httpguts"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// The names of the settings that waf writes into log lines and ban notes,
@@ -113,7 +115,7 @@ type WAF struct {
// with a tag that percentage of every rate limit and byte limit, from 1
// to 99 (SWW_WAF_TAG_LIMIT_PERCENT). All hold tags as requests carry them: in
// lower case, a country code in capitals.
TagLists []TagList
TagLists []reputation.TagList
TagDeny []string
TagLimitPercent map[string]int64
// RouteWatchURL is where the routewatch instance is that adds the asn=
@@ -510,12 +512,8 @@ var (
"is not a whole number above zero, such as 60, or off",
)
errNotUTF8 = errors.New("is not valid UTF-8")
errNotASN = errors.New("is not an AS number such as AS64496")
errNotPercentItem = errors.New(
"is not a code, : and a percentage, such as AS64496:50 or cn:25")
errNotPercent = errors.New(
"is not a percentage, a whole number from 0 to 100",
)
errNotAbuseIPDBThreshold = errors.New(
"is not a whole number from 25 to 100, the scores AbuseIPDB's " +
"blacklist can be cut at",
@@ -638,7 +636,7 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
RouteWatchURL: env.routeWatchURL("SWW_WAF_ROUTEWATCH_URL"),
ASNBytesLimitPercent: env.percents(
ASNBytesLimitPercentSetting,
ParseASN,
reputation.ParseASN,
),
CountryBytesLimitPercent: env.percents(
CountryBytesLimitPercentSetting,
@@ -1024,7 +1022,7 @@ func (e *environment) percents(
}
// tagLists reads SWW_WAF_TAG_LISTS, which is empty by default.
func (e *environment) tagLists(name string) []TagList {
func (e *environment) tagLists(name string) []reputation.TagList {
lists, err := parseTagLists(e.value(name, ""))
e.check(name, err)
@@ -1050,7 +1048,7 @@ func (e *environment) tagPercents(name string) map[string]int64 {
// percent reads a setting that is a percentage, from 0 to 100.
func (e *environment) percent(name, defaultValue string) int64 {
percent, err := ParsePercent(e.value(name, defaultValue))
percent, err := reputation.ParsePercent(e.value(name, defaultValue))
e.check(name, err)
return percent
@@ -1135,7 +1133,7 @@ func (e *environment) action(
string(value), string(ReputationActionLimit)+":",
)
percent, err := ParsePercent(percentText)
percent, err := reputation.ParsePercent(percentText)
if !isLimit || err != nil {
e.check(name, fmt.Errorf("%q %w", value, errNotAction))
}
@@ -1144,8 +1142,8 @@ func (e *environment) action(
}
// zones reads the setting that is the list of DNSBL zones. It is empty by
// default. The log shows each zone with its key masked, as MaskZoneKey
// masks it.
// default. The log shows each zone with its key masked, as
// reputation.MaskZoneKey masks it.
func (e *environment) zones(name string) []string {
value, _ := e.lookup(name)
zones, err := parseZones(value)
@@ -1153,7 +1151,7 @@ func (e *environment) zones(name string) []string {
logged := make([]string, len(zones))
for i, zone := range zones {
logged[i] = MaskZoneKey(zone)
logged[i] = reputation.MaskZoneKey(zone)
}
e.settings = append(
@@ -1314,7 +1312,11 @@ func (e *environment) checkTags(cfg *WAF) {
// checkTag returns an error when tag would never apply, as checkTags says.
func checkTag(cfg *WAF, tag string) error {
if !requestCanGetTag(cfg, tag) {
return fmt.Errorf("%q %w", MaskZoneKey(tag), errNoRequestGetsTag)
return fmt.Errorf(
"%q %w",
reputation.MaskZoneKey(tag),
errNoRequestGetsTag,
)
}
return nil
@@ -1322,7 +1324,7 @@ func checkTag(cfg *WAF, tag string) error {
// requestCanGetTag reports whether anything cfg sets up can give a request tag.
func requestCanGetTag(cfg *WAF, tag string) bool {
isListName := func(list TagList) bool { return list.Name == tag }
isListName := func(list reputation.TagList) bool { return list.Name == tag }
if isLookupTag(tag) || slices.ContainsFunc(cfg.TagLists, isListName) {
return true
}
@@ -1346,7 +1348,7 @@ func requestCanGetTag(cfg *WAF, tag string) bool {
return isZoneTag &&
slices.ContainsFunc(cfg.DNSBLZones, func(each string) bool {
return strings.ToLower(MaskZoneKey(each)) == zone
return strings.ToLower(reputation.MaskZoneKey(each)) == zone
})
}
@@ -1844,7 +1846,9 @@ func parseNamedNetblocks(value string) ([]anomaly.NamedNetblock, error) {
return nil, fmt.Errorf("%q %w", item, errNotNamedNetblock)
}
netblock, err := ParseNetblock(strings.TrimSpace(netblockText))
netblock, err := reputation.ParseNetblock(
strings.TrimSpace(netblockText),
)
if err != nil {
return nil, err
}
@@ -2050,21 +2054,6 @@ func parseCountry(value string) (string, error) {
return country, nil
}
// ParseASN reads an AS number such as AS64496, in either case, and
// returns it as the lookup gives it: AS and the number, in capitals and
// without leading zeros. The file SWW_WAF_ASN_LIMIT_PERCENT_URL names is
// read with it too.
func ParseASN(value string) (string, error) {
digits, hasAS := strings.CutPrefix(strings.ToUpper(value), "AS")
number, err := strconv.ParseUint(digits, 10, 32)
if !hasAS || err != nil {
return "", fmt.Errorf("%q %w", value, errNotASN)
}
return "AS" + strconv.FormatUint(number, 10), nil
}
// The tags a request can get that the settings can name, as waf
// writes them. The prefixes are followed by a value.
const (
@@ -2078,24 +2067,17 @@ const (
ExploitSignatureTag = "exploitsignature"
)
// TagList is an address list of SWW_WAF_TAG_LISTS: the tag it adds to the
// requests of the clients it holds, and the URL it is fetched from.
type TagList struct {
Name string
URL string
}
// parseTagLists reads a comma-separated list of name=URL pairs, such as
// torexit=https://example.com/tor.txt, and returns each list with its name
// in lower case. A name can hold a =, as vpn=mullvad does, and ends at the
// = before http. A name or a URL listed twice is an error.
func parseTagLists(value string) ([]TagList, error) {
func parseTagLists(value string) ([]reputation.TagList, error) {
items, err := parseList(value)
if err != nil {
return nil, err
}
lists := make([]TagList, 0, len(items))
lists := make([]reputation.TagList, 0, len(items))
for _, item := range items {
end := strings.Index(item, "=http")
@@ -2103,9 +2085,12 @@ func parseTagLists(value string) ([]TagList, error) {
return nil, fmt.Errorf("%q %w", item, errNotTagList)
}
list := TagList{Name: strings.ToLower(item[:end]), URL: item[end+1:]}
list := reputation.TagList{
Name: strings.ToLower(item[:end]),
URL: item[end+1:],
}
if slices.ContainsFunc(lists, func(earlier TagList) bool {
if slices.ContainsFunc(lists, func(earlier reputation.TagList) bool {
return earlier.Name == list.Name || earlier.URL == list.URL
}) {
return nil, fmt.Errorf("%q %w", item, errListedTwice)
@@ -2118,7 +2103,8 @@ func parseTagLists(value string) ([]TagList, error) {
}
// parseTags reads a comma-separated list of tags, which parseTag reads. A
// tag listed twice is an error, which shows the tag as MaskZoneKey does.
// tag listed twice is an error, which shows the tag as
// reputation.MaskZoneKey does.
func parseTags(value string) ([]string, error) {
items, err := parseList(value)
if err != nil {
@@ -2138,7 +2124,7 @@ func parseTags(value string) ([]string, error) {
if slices.Contains(tags, tag) {
return nil, fmt.Errorf(
"%q %w",
MaskZoneKey(item),
reputation.MaskZoneKey(item),
errListedTwice,
)
}
@@ -2207,7 +2193,7 @@ func parseTagPercents(value string) (map[string]int64, error) {
if colon <= 0 {
return nil, fmt.Errorf(
"%q %w",
MaskZoneKey(item),
reputation.MaskZoneKey(item),
errNotTagPercentItem,
)
}
@@ -2221,7 +2207,7 @@ func parseTagPercents(value string) (map[string]int64, error) {
if err != nil || percent < 1 || percent > 99 {
return nil, fmt.Errorf(
"%q %w",
MaskZoneKey(item[colon+1:]),
reputation.MaskZoneKey(item[colon+1:]),
errNotTagPercent,
)
}
@@ -2233,7 +2219,11 @@ func parseTagPercents(value string) (map[string]int64, error) {
if _, listed := percents[tag]; listed {
// tag, since item[:colon] may end in a space, which MaskZoneKey
// would not mask.
return nil, fmt.Errorf("%q %w", MaskZoneKey(tag), errListedTwice)
return nil, fmt.Errorf(
"%q %w",
reputation.MaskZoneKey(tag),
errListedTwice,
)
}
percents[tag] = percent
@@ -2267,7 +2257,7 @@ func parsePercents(
return nil, err
}
percent, err := ParsePercent(percentText)
percent, err := reputation.ParsePercent(percentText)
if err != nil {
return nil, err
}
@@ -2282,38 +2272,6 @@ func parsePercents(
return percents, nil
}
// ParsePercent reads a percentage, a whole number from 0 to 100. The file
// SWW_WAF_ASN_LIMIT_PERCENT_URL names is read with it too.
func ParsePercent(value string) (int64, error) {
percent, err := strconv.ParseInt(value, 10, 64)
if err != nil || percent < 0 || percent > 100 {
return 0, fmt.Errorf("%q %w", value, errNotPercent)
}
return percent, nil
}
// headerNameChars are the characters RFC 9110 allows in a header name:
// letters, digits and these marks.
const headerNameChars = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" +
"0123456789!#$%&'*+-.^_`|~"
// IsHeaderName reports whether name can be a header name: one or more of
// the characters RFC 9110 allows in one.
func IsHeaderName(name string) bool {
if name == "" {
return false
}
for _, char := range name {
if !strings.ContainsRune(headerNameChars, char) {
return false
}
}
return true
}
// parseHeaderNames reads a comma-separated list of header names in either
// case, and returns them in lower case. Host and Transfer-Encoding are
// refused: Go's HTTP server takes them out of the request's headers.
@@ -2326,7 +2284,7 @@ func parseHeaderNames(value string) ([]string, error) {
headers := make([]string, 0, len(items))
for _, item := range items {
if !IsHeaderName(item) {
if !httpguts.ValidHeaderFieldName(item) {
return nil, fmt.Errorf("%q %w", item, errNotHeaderName)
}
@@ -2482,8 +2440,8 @@ const (
// other name for one that does not exist, so that the zone would list no
// client. A zone listed twice is an error, whatever the case of its
// letters, which DNS names ignore, and whatever its key, since
// MaskZoneKey shows two keys of one zone alike. An error shows a zone as
// MaskZoneKey does.
// reputation.MaskZoneKey shows two keys of one zone alike. An error shows a
// zone as it does.
func parseZones(value string) ([]string, error) {
zones, err := parseList(value)
if err != nil {
@@ -2493,11 +2451,14 @@ func parseZones(value string) ([]string, error) {
}
for i, zone := range zones {
shown := MaskZoneKey(zone)
shown := reputation.MaskZoneKey(zone)
listedBefore := slices.ContainsFunc(
zones[:i],
func(earlier string) bool {
return strings.EqualFold(MaskZoneKey(earlier), shown)
return strings.EqualFold(
reputation.MaskZoneKey(earlier),
shown,
)
},
)
@@ -2514,24 +2475,6 @@ func parseZones(value string) ([]string, error) {
return zones, nil
}
// MaskZoneKey returns zone with ******** in place of its key, if it is a
// zone of Spamhaus's keyed query service, a name under dq.spamhaus.net,
// such as <key>.xbl.dq.spamhaus.net, whose first label is the key. Any
// other zone it returns as it is. A zone is shown so wherever it leaves
// the process: in the log, the alerts and the metrics.
func MaskZoneKey(zone string) string {
// DNS names ignore case, and a name may be written with a dot at its
// end.
name := strings.TrimSuffix(strings.ToLower(zone), ".")
if !strings.HasSuffix(name, ".dq.spamhaus.net") {
return zone
}
_, rest, _ := strings.Cut(zone, ".")
return masked + "." + rest
}
// isZone reports whether each label of zone is as parseZones takes it. It
// also checks the hostnames of SWW_WAF_APPS, which are DNS names too.
func isZone(zone string) bool {
@@ -2587,7 +2530,7 @@ func parseWebhookHeaders(value string) (http.Header, string, error) {
name, headerValue, found := strings.Cut(item, ":")
name = strings.TrimSpace(name)
if !found || !IsHeaderName(name) ||
if !found || !httpguts.ValidHeaderFieldName(name) ||
strings.ContainsAny(headerValue, "\r\n\x00") {
return nil, "", fmt.Errorf(
"item %d %w",
+29 -20
View File
@@ -18,10 +18,12 @@ import (
"time"
"github.com/spf13/viper"
"golang.org/x/net/http/httpguts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// The settings, by name.
@@ -864,6 +866,32 @@ func TestInstanceNameAndLoggedHeadersAsSet(t *testing.T) {
}
}
// config and rules check header names with httpguts.ValidHeaderFieldName.
// It takes a name of one or more of the characters RFC 9110 allows in one,
// as the check it replaced did: letters, digits and these marks.
func TestHeaderNameCheckTakesTheRFC9110Characters(t *testing.T) {
t.Parallel()
const marks = "!#$%&'*+-.^_`|~"
if httpguts.ValidHeaderFieldName("") {
t.Error("the empty name is taken")
}
for b := range 256 {
char := byte(b)
want := 'a' <= char && char <= 'z' || 'A' <= char && char <= 'Z' ||
'0' <= char && char <= '9' || strings.IndexByte(marks, char) >= 0
// string(char) would be the UTF-8 of U+0080 to U+00FF, two bytes,
// for a byte above 0x7f.
name := string([]byte{char})
if got := httpguts.ValidHeaderFieldName(name); got != want {
t.Errorf("the name %q is taken: %t, want %t", name, got, want)
}
}
}
func TestRemoteLogSettingsDefaults(t *testing.T) {
t.Parallel()
@@ -1694,7 +1722,7 @@ func TestTagSettingsAsSet(t *testing.T) {
tagLimitPercent: "vpn=mullvad :50, asn=014061:25, COUNTRY=cn:1, dnsbl=zen.example:99",
})
wantLists := []config.TagList{
wantLists := []reputation.TagList{
{Name: torExitTag, URL: torURL},
{Name: "vpn=mullvad", URL: "https://example.com/mullvad.txt"},
}
@@ -2288,25 +2316,6 @@ func TestInvalidDNSBLSettingStopsTheStartSayingWhatIsWrong(t *testing.T) {
}
}
func TestMaskZoneKeyMasksTheFirstLabelOfAZoneUnderDqSpamhausNet(
t *testing.T,
) {
t.Parallel()
for zone, want := range map[string]string{
spamhaus: spamhausMasked,
spamhaus + ".": spamhausMasked + ".",
"KEY.ZEN.DQ.SPAMHAUS.NET": "********.ZEN.DQ.SPAMHAUS.NET",
dronebl: dronebl,
"dq.spamhaus.net": "dq.spamhaus.net",
spamhaus + ".example": spamhaus + ".example",
} {
if got := config.MaskZoneKey(zone); got != want {
t.Errorf("MaskZoneKey(%q) is %q, want %q", zone, got, want)
}
}
}
func TestDNSBLZoneKeyIsLoggedMaskedAndNeverShown(t *testing.T) {
t.Parallel()
+90
View File
@@ -0,0 +1,90 @@
// Package dirwatch watches a directory, and calls a function once the
// directory has gone a short time without a change after one. The rule
// files and the lookup database are read again this way.
package dirwatch
import (
"context"
"time"
"github.com/fsnotify/fsnotify"
)
// quietTime is how long the directory must go without a change before the
// function is called, so that a file still being written, such as one
// saved in place, appended to or copied in with scp, is read only once
// whole.
const quietTime = 2 * time.Second
// Watcher watches one directory. The directory is watched, rather than a
// file in it, so that a file replaced by a rename is seen.
type Watcher struct {
watcher *fsnotify.Watcher
}
// New starts watching dir, or returns why it cannot.
func New(dir string) (*Watcher, error) {
watcher, err := fsnotify.NewWatcher()
if err != nil {
return nil, err
}
err = watcher.Add(dir)
if err != nil {
_ = watcher.Close()
return nil, err
}
return &Watcher{watcher: watcher}, nil
}
// Close stops watching the directory.
func (w *Watcher) Close() error {
return w.watcher.Close()
}
// CallWhenQuiet calls changed each time the directory has gone quietTime
// without a change, after a change to a path for which counts is true, until
// ctx is done. It also calls failed with each error the watch reports. The
// wait starts at once, as if for a change, so that a change made before the
// watch began is taken in too.
func (w *Watcher) CallWhenQuiet(
ctx context.Context,
counts func(path string) bool,
changed func(),
failed func(error),
) {
callWhenQuiet(
ctx, w.watcher.Events, w.watcher.Errors, counts, changed, failed,
)
}
// callWhenQuiet is CallWhenQuiet, for the changes from events and the
// errors from errs.
func callWhenQuiet(
ctx context.Context,
events <-chan fsnotify.Event,
errs <-chan error,
counts func(path string) bool,
changed func(),
failed func(error),
) {
quiet := time.NewTimer(quietTime)
defer quiet.Stop()
for {
select {
case <-ctx.Done():
return
case event := <-events:
if counts(event.Name) {
quiet.Reset(quietTime)
}
case <-quiet.C:
changed()
case err := <-errs:
failed(err)
}
}
}
+167
View File
@@ -0,0 +1,167 @@
package dirwatch
import (
"context"
"errors"
"path/filepath"
"sync/atomic"
"testing"
"testing/synctest"
"time"
"github.com/fsnotify/fsnotify"
)
// errWatch is an error the watch reports.
var errWatch = errors.New("too many changes")
func TestDirectoryThatCannotBeWatchedIsAnError(t *testing.T) {
t.Parallel()
_, err := New(filepath.Join(t.TempDir(), "missing"))
if err == nil {
t.Error("a missing directory is watched, want an error")
}
}
// The tests below run callWhenQuiet in a synctest bubble, where time is a
// clock of the test's own: time.Sleep moves it on at once, and
// synctest.Wait returns once callWhenQuiet waits again, so that every call
// due by then is made. The test sends the changes itself, as the watch of
// a directory cannot run in a bubble.
func TestSecondChangeStartsTheWaitAgain(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
loop := start(t, everyPath)
loop.changes <- fsnotify.Event{Name: "50-app.rules", Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
loop.wantCalls(t, 0)
// The second part starts the wait again.
loop.changes <- fsnotify.Event{Name: "50-app.rules", Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
loop.wantCalls(t, 0)
time.Sleep(time.Nanosecond)
synctest.Wait()
loop.wantCalls(t, 1)
})
}
func TestCalledOnceQuietAfterTheStart(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
// An edit saved before the watch began sends no change, and is
// taken in by this call.
loop := start(t, everyPath)
time.Sleep(quietTime)
synctest.Wait()
loop.wantCalls(t, 1)
// Long after, it has been called only once.
time.Sleep(time.Hour)
synctest.Wait()
loop.wantCalls(t, 1)
})
}
func TestChangeThatDoesNotCountIsNoChange(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
loop := start(t, func(path string) bool {
return path == "ipinfo_lite.mmdb"
})
// The wait that starts with the watch ends with a call.
time.Sleep(quietTime)
synctest.Wait()
loop.changes <- fsnotify.Event{Name: "other.mmdb", Op: fsnotify.Create}
time.Sleep(quietTime)
synctest.Wait()
loop.wantCalls(t, 1)
loop.changes <- fsnotify.Event{Name: "ipinfo_lite.mmdb", Op: fsnotify.Write}
time.Sleep(quietTime)
synctest.Wait()
loop.wantCalls(t, 2)
})
}
func TestErrorsOfTheWatchHandedOn(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
loop := start(t, everyPath)
loop.errs <- errWatch
synctest.Wait()
if !errors.Is(loop.failure, errWatch) {
t.Errorf("failed with %v, want %v", loop.failure, errWatch)
}
})
}
// loop is a callWhenQuiet that a test runs.
type loop struct {
// changes and errs send it changes and errors.
changes chan fsnotify.Event
errs chan error
// calls counts its calls of changed, and failure is the last error it
// handed to failed.
calls atomic.Int32
failure error
}
// start runs callWhenQuiet, with counts, until the test ends.
func start(t *testing.T, counts func(path string) bool) *loop {
t.Helper()
l := &loop{changes: make(chan fsnotify.Event), errs: make(chan error)}
ctx, stop := context.WithCancel(t.Context())
stopped := make(chan struct{})
go func() {
callWhenQuiet(ctx, l.changes, l.errs, counts,
func() { l.calls.Add(1) },
func(err error) { l.failure = err },
)
close(stopped)
}()
t.Cleanup(func() {
stop()
<-stopped
})
return l
}
// everyPath counts a change to any path.
func everyPath(string) bool {
return true
}
// wantCalls checks how many times changed has been called.
func (l *loop) wantCalls(t *testing.T, want int32) {
t.Helper()
got := l.calls.Load()
if got != want {
t.Errorf("changed called %d times, want %d", got, want)
}
}
+18 -49
View File
@@ -13,18 +13,13 @@ import (
"sync"
"time"
"github.com/fsnotify/fsnotify"
"github.com/oschwald/maxminddb-golang/v2"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/dirwatch"
"sneak.berlin/go/smallwebwaf/internal/geojs"
)
// quietTime is how long the lookup database must go without a change
// before it is read again, so that a file still being copied in is read
// only once whole.
const quietTime = 2 * time.Second
// FileParams are what OpenFile needs.
type FileParams struct {
// Path is the lookup database, the IPinfo Lite file in its .mmdb form
@@ -122,20 +117,13 @@ func (f *File) ReadFailures() int {
}
// Watch watches the directory of the lookup database until ctx is done,
// and reads the file again once it has gone without a change for
// quietTime, after it is replaced, written or removed, and after Watch
// starts watching. If the directory cannot be watched, that is logged, and
// the database read at start stays in use.
// and reads the file again once it has gone without a change for a short
// time, after it is replaced, written or removed, and after Watch starts
// watching, as dirwatch describes. A change to another file in its
// directory does not count. If the directory cannot be watched, that is
// logged, and the database read at start stays in use.
func (f *File) Watch(ctx context.Context) {
watcher, err := fsnotify.NewWatcher()
if err == nil {
defer func() {
_ = watcher.Close()
}()
err = watcher.Add(filepath.Dir(f.params.Path))
}
watcher, err := dirwatch.New(filepath.Dir(f.params.Path))
if err != nil {
f.params.ProcessLog.Error(
"cannot watch the lookup database for replacements",
@@ -146,41 +134,22 @@ func (f *File) Watch(ctx context.Context) {
return
}
defer func() {
_ = watcher.Close()
}()
f.params.ProcessLog.Info("watching the lookup database for replacements",
"file", f.params.Path)
f.readAfterChanges(ctx, watcher.Events, watcher.Errors)
watcher.CallWhenQuiet(ctx, f.isDatabase, f.readAgain, func(err error) {
f.params.ProcessLog.Warn("watching the lookup database failed",
"error", err.Error())
})
}
// readAfterChanges reads the lookup database again once quietTime has
// passed without a change to it from events, until ctx is done, and logs
// the errors from errs. A change to another file in its directory does not
// count. The wait starts at once, as if for a change, so that a file
// replaced after OpenFile read it, and before its directory was watched,
// is read too.
func (f *File) readAfterChanges(
ctx context.Context, events <-chan fsnotify.Event, errs <-chan error,
) {
path := filepath.Clean(f.params.Path)
quiet := time.NewTimer(quietTime)
defer quiet.Stop()
for {
select {
case <-ctx.Done():
return
case event := <-events:
if filepath.Clean(event.Name) == path {
quiet.Reset(quietTime)
}
case <-quiet.C:
f.readAgain()
case err := <-errs:
f.params.ProcessLog.Warn("watching the lookup database failed",
"error", err.Error())
}
}
// isDatabase reports whether path names the lookup database.
func (f *File) isDatabase(path string) bool {
return filepath.Clean(path) == filepath.Clean(f.params.Path)
}
// readAgain reads the lookup database again, in place of the one in use,
+35 -141
View File
@@ -1,7 +1,6 @@
package lookup
import (
"context"
"log/slog"
"net/netip"
"net/url"
@@ -12,7 +11,6 @@ import (
"testing/synctest"
"time"
"github.com/fsnotify/fsnotify"
"github.com/maxmind/mmdbwriter/mmdbtype"
"sneak.berlin/go/smallwebwaf/internal/alerts"
@@ -133,66 +131,48 @@ func TestFileThatCannotBeReadIsAnError(t *testing.T) {
}
}
// The tests below run readAfterChanges in a synctest bubble, where time is
// a clock of the test's own: time.Sleep moves it on at once, and
// synctest.Wait returns once readAfterChanges waits again, so that every
// reading due by then is done. The test sends the changes itself, as the
// watch of a directory cannot run in a bubble.
func TestChangeOfAnotherFileInTheDirectoryIsNoReplacement(t *testing.T) {
t.Parallel()
func TestReplacementCopiedOverTheFileInTwoPartsIsReadOnlyWhole(
t *testing.T,
) {
dir := t.TempDir()
path := filepath.Join(dir, "ipinfo_lite.mmdb")
writeDatabase(t, path, "DE")
f := openFile(t, path, newQueue())
for changed, want := range map[string]bool{
path: true,
dir + "/./ipinfo_lite.mmdb": true,
filepath.Join(dir, "other.mmdb"): false,
} {
if f.isDatabase(changed) != want {
t.Errorf(
"a change to %s counts: %t, want %t",
changed,
!want,
want,
)
}
}
}
// The tests below run in a synctest bubble, where time is a clock of the
// test's own, so that the time a file is read can be checked. The wait for
// the directory to go quiet before a reading is tested in dirwatch.
func TestReplacementIsReadAgain(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
dir := t.TempDir()
path := filepath.Join(dir, "ipinfo_lite.mmdb")
path := filepath.Join(t.TempDir(), "ipinfo_lite.mmdb")
writeDatabase(t, path, "DE")
queue := newQueue()
f := openFile(t, path, queue)
changes := watch(t, f)
other := filepath.Join(dir, "replacement.mmdb")
writeDatabase(t, other, "KP")
//nolint:gosec // a file the test wrote
replacement, err := os.ReadFile(other)
if err != nil {
t.Fatalf("read %s: %v", other, err)
}
// The file in use is overwritten in place, and keeps giving what
// it gave. Its first part alone is not a .mmdb file.
file, err := os.Create(path) //nolint:gosec // a file the test wrote
if err != nil {
t.Fatalf("create %s: %v", path, err)
}
defer func() {
_ = file.Close()
}()
half := len(replacement) / 2
write(t, file, replacement[:half])
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
wantCountry(t, f, "DE")
// The second part starts the wait again.
write(t, file, replacement[half:])
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
wantCountry(t, f, "DE")
time.Sleep(time.Nanosecond)
synctest.Wait()
writeDatabase(t, path, "KP")
time.Sleep(time.Hour)
f.readAgain()
wantCountry(t, f, "KP")
if !f.LastRead().Equal(time.Now()) || f.ReadFailures() != 0 {
@@ -219,15 +199,10 @@ func TestReplacementThatCannotBeReadLeavesTheFileInUseWithOneAlert(
queue := newQueue()
f := openFile(t, path, queue)
read := f.LastRead()
changes := watch(t, f)
writeFile(t, path, "not a lookup database\n")
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
// Long after, the replacement has been read once.
time.Sleep(time.Hour)
synctest.Wait()
f.readAgain()
wantCountry(t, f, "DE")
if !f.LastRead().Equal(read) || f.ReadFailures() != 1 {
@@ -240,7 +215,7 @@ func TestReplacementThatCannotBeReadLeavesTheFileInUseWithOneAlert(
}
wantAlerts(t, queue, alerts.Alert{
Time: read.Add(quietTime),
Time: read.Add(time.Hour),
Event: alerts.EventFileError,
Reason: "the lookup database cannot be read, and the one read before stays in use",
Detail: map[string]any{
@@ -252,55 +227,6 @@ func TestReplacementThatCannotBeReadLeavesTheFileInUseWithOneAlert(
})
}
func TestChangeOfAnotherFileInTheDirectoryIsNoReplacement(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
dir := t.TempDir()
path := filepath.Join(dir, "ipinfo_lite.mmdb")
writeDatabase(t, path, "DE")
f := openFile(t, path, newQueue())
changes := watch(t, f)
// The wait that starts with the watch ends with a reading.
time.Sleep(quietTime)
synctest.Wait()
writeDatabase(t, path, "KP")
changes <- fsnotify.Event{Name: filepath.Join(dir, "other.mmdb"), Op: fsnotify.Create}
time.Sleep(quietTime)
synctest.Wait()
wantCountry(t, f, "DE")
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
time.Sleep(quietTime)
synctest.Wait()
wantCountry(t, f, "KP")
})
}
func TestReplacementSavedBeforeTheWatchStartsIsRead(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
path := filepath.Join(t.TempDir(), "ipinfo_lite.mmdb")
writeDatabase(t, path, "DE")
f := openFile(t, path, newQueue())
// Saved after OpenFile read the file, and before its directory was
// watched, so that no change is seen for it.
writeDatabase(t, path, "KP")
watch(t, f)
time.Sleep(quietTime)
synctest.Wait()
wantCountry(t, f, "KP")
})
}
// newQueue returns a queue of alerts for a webhook that is never sent
// them, so that they wait in it for the test to look at.
func newQueue() *alerts.Queue {
@@ -344,28 +270,6 @@ func openFile(t *testing.T, path string, queue *alerts.Queue) *File {
return f
}
// watch runs f's readAfterChanges until the test ends, and returns the
// channel that sends it changes.
func watch(t *testing.T, f *File) chan<- fsnotify.Event {
t.Helper()
changes := make(chan fsnotify.Event)
ctx, stop := context.WithCancel(t.Context())
stopped := make(chan struct{})
go func() {
f.readAfterChanges(ctx, changes, nil)
close(stopped)
}()
t.Cleanup(func() {
stop()
<-stopped
})
return changes
}
// wantCountry checks the country f gives testClient.
func wantCountry(t *testing.T, f *File, want string) {
t.Helper()
@@ -401,13 +305,3 @@ func writeFile(t *testing.T, path, content string) {
t.Fatalf("write %s: %v", path, err)
}
}
// write writes data to the end of file.
func write(t *testing.T, file *os.File, data []byte) {
t.Helper()
_, err := file.Write(data)
if err != nil {
t.Fatalf("write: %v", err)
}
}
+4 -3
View File
@@ -14,7 +14,6 @@ import (
"github.com/prometheus/client_golang/prometheus/promhttp"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
@@ -301,7 +300,7 @@ const sourceLabel = "source"
// AddReputation adds the metrics of the lists fetched from URLs and of the
// DNSBL zones, by source, each list's URL or each zone, its key masked as
// config.MaskZoneKey masks it: the requests whose client a blocklist, a
// reputation.MaskZoneKey masks it: the requests whose client a blocklist, a
// zone's verdict or AbuseIPDB's score lists, which ReputationHit counts,
// and, read from lists and dnsbl as the metrics are asked for, for a list,
// the fetches that failed and when the copy in use was fetched, and for a
@@ -320,7 +319,9 @@ func (m *Metrics) AddReputation(
m.registry.MustRegister(m.reputationHits)
for _, zone := range dnsbl.Zones() {
source := prometheus.Labels{sourceLabel: config.MaskZoneKey(zone)}
source := prometheus.Labels{
sourceLabel: reputation.MaskZoneKey(zone),
}
m.addReputationQueries(
source,
+23 -4
View File
@@ -16,7 +16,6 @@ import (
"github.com/hashicorp/golang-lru/v2/simplelru"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config"
)
const (
@@ -32,6 +31,8 @@ const (
// it fails, and no client is checked with AbuseIPDB after a check
// fails, so that a source refusing them is not asked on every request.
failureDelay = time.Minute
// maskedKey is what MaskZoneKey shows in place of a zone's key.
maskedKey = "********"
)
var (
@@ -131,6 +132,24 @@ func NewDNSBL(params DNSBLParams) *DNSBL {
}
}
// MaskZoneKey returns zone with ******** in place of its key, if it is a
// zone of Spamhaus's keyed query service, a name under dq.spamhaus.net,
// such as <key>.xbl.dq.spamhaus.net, whose first label is the key. Any
// other zone it returns as it is. A zone is shown so wherever it leaves
// the process: in the log, the alerts and the metrics.
func MaskZoneKey(zone string) string {
// DNS names ignore case, and a name may be written with a dot at its
// end.
name := strings.TrimSuffix(strings.ToLower(zone), ".")
if !strings.HasSuffix(name, ".dq.spamhaus.net") {
return zone
}
_, rest, _ := strings.Cut(zone, ".")
return maskedKey + "." + rest
}
// Zones returns the zones, in the order SWW_WAF_DNSBL_ZONES names them.
func (d *DNSBL) Zones() []string {
return slices.Clone(d.params.Zones)
@@ -138,7 +157,7 @@ func (d *DNSBL) Zones() []string {
// ListedBy returns the zones whose verdict on addr, a client's address,
// lists it, in the order SWW_WAF_DNSBL_ZONES names them, each with its key
// masked, as config.MaskZoneKey masks it, since they go to the request
// masked, as MaskZoneKey masks it, since they go to the request
// log, the alerts and the metrics. A verdict is used until CacheTTL has
// passed since it was fetched. Each zone without one is asked about addr
// in the background, unless a query about addr to it is under way, the
@@ -163,7 +182,7 @@ func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string {
switch {
case found && now.Sub(kept.Fetched) < d.params.CacheTTL:
if kept.Listed {
listedBy = append(listedBy, config.MaskZoneKey(zone))
listedBy = append(listedBy, MaskZoneKey(zone))
}
case !asking && !d.stopped && !now.Before(d.retryAt[zone]) &&
len(d.asking) < maxQueries:
@@ -292,7 +311,7 @@ func (d *DNSBL) ask(ctx context.Context, q query) {
if isFailure {
const failed = "asking a DNSBL zone failed"
shown := config.MaskZoneKey(q.zone)
shown := MaskZoneKey(q.zone)
// Raised before it is logged, so that the alert is there once the
// log line is.
+25
View File
@@ -860,3 +860,28 @@ func wantAsked(t *testing.T, resolver *resolverStandIn, want ...string) {
t.Errorf("asked about %v, want %v", got, want)
}
}
func TestMaskZoneKeyMasksTheFirstLabelOfAZoneUnderDqSpamhausNet(
t *testing.T,
) {
t.Parallel()
const (
dronebl = "dnsbl.dronebl.org"
spamhaus = "abcdefghijklmnopqrstuvwxyz.xbl.dq.spamhaus.net"
spamhausMasked = "********.xbl.dq.spamhaus.net"
)
for zone, want := range map[string]string{
spamhaus: spamhausMasked,
spamhaus + ".": spamhausMasked + ".",
"KEY.ZEN.DQ.SPAMHAUS.NET": "********.ZEN.DQ.SPAMHAUS.NET",
dronebl: dronebl,
"dq.spamhaus.net": "dq.spamhaus.net",
spamhaus + ".example": spamhaus + ".example",
} {
if got := reputation.MaskZoneKey(zone); got != want {
t.Errorf("MaskZoneKey(%q) is %q, want %q", zone, got, want)
}
}
}
+77 -11
View File
@@ -7,8 +7,10 @@
// SWW_WAF_DNSBL_ZONES about clients, and keeps their verdicts, and checks
// clients with AbuseIPDB, and keeps their scores and the checks spent
// today. The state package writes all of these to files and reads them
// from there, so that a restart keeps them too. Last, it fetches
// AbuseIPDB's blacklist, which it does not keep.
// from there, so that a restart keeps them too. It fetches AbuseIPDB's
// blacklist, which it does not keep. Last, it reads the netblocks, AS
// numbers and percentages that both the settings and the lists hold, and
// masks the keys of DNSBL zones.
package reputation
import (
@@ -20,12 +22,12 @@ import (
"net/http"
"net/netip"
"slices"
"strconv"
"strings"
"sync"
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config"
)
const (
@@ -40,15 +42,28 @@ const (
)
var (
errStatus = errors.New("the server answered")
errTooLong = errors.New("the list is longer than 16 MiB")
errNotNetblock = errors.New(
errStatus = errors.New("the server answered")
errTooLong = errors.New("the list is longer than 16 MiB")
errNotNetblockLine = errors.New(
"is not an address or a netblock, such as 192.0.2.0/24",
)
errNotASNPercent = errors.New(
"is not an AS number, : and a percentage, such as AS64496:50")
errNotNetblock = errors.New(
"is not a netblock such as 10.0.0.0/8, or an address")
errNotASN = errors.New("is not an AS number such as AS64496")
errNotPercent = errors.New(
"is not a percentage, a whole number from 0 to 100",
)
)
// TagList is an address list of SWW_WAF_TAG_LISTS: the tag it adds to the
// requests of the clients it holds, and the URL it is fetched from.
type TagList struct {
Name string
URL string
}
// List is a list as lists.json holds it: the URL it is fetched from,
// when it was last tried, the fetch failed or not, and its last good copy:
// when that was fetched, and its lines, as fetched, comment lines
@@ -68,7 +83,7 @@ type Params struct {
BlocklistURLs []string
ASNLimitPercentURL string
// TagLists are the address lists that add a tag (SWW_WAF_TAG_LISTS).
TagLists []config.TagList
TagLists []TagList
// Refresh is how long after a list was last fetched or tried it is
// fetched again (SWW_WAF_BLOCKLIST_REFRESH).
Refresh time.Duration
@@ -465,7 +480,11 @@ func parseNetblocks(lines []string) (entries, error) {
netblock, ok := parseNetblock(text)
if !ok {
return entries{}, fmt.Errorf("line %d %w", i+1, errNotNetblock)
return entries{}, fmt.Errorf(
"line %d %w",
i+1,
errNotNetblockLine,
)
}
found.netblocks[netblock] = true
@@ -485,7 +504,7 @@ func parseNetblocks(lines []string) (entries, error) {
// stands for, 192.0.2.0/24, and a mapped netblock shorter than /96, which
// stands for none, is refused.
func parseNetblock(text string) (netip.Prefix, bool) {
netblock, err := config.ParseNetblock(text)
netblock, err := ParseNetblock(text)
if err != nil {
return netip.Prefix{}, false
}
@@ -520,9 +539,9 @@ func parsePercents(lines []string) (entries, error) {
}
asnText, percentText, _ := strings.Cut(text, ":")
asn, asnErr := config.ParseASN(asnText)
asn, asnErr := ParseASN(asnText)
percent, percentErr := config.ParsePercent(percentText)
percent, percentErr := ParsePercent(percentText)
if asnErr != nil || percentErr != nil {
return entries{}, fmt.Errorf("line %d %w", i+1, errNotASNPercent)
}
@@ -536,6 +555,53 @@ func parsePercents(lines []string) (entries, error) {
return found, nil
}
// ParseNetblock reads a netblock in CIDR form, such as 10.0.0.0/8. A bare
// address is a netblock of that address alone, a /32 or a /128. A
// blocklist's lines are read with it too.
func ParseNetblock(value string) (netip.Prefix, error) {
if strings.Contains(value, "/") {
netblock, err := netip.ParsePrefix(value)
if err != nil {
return netip.Prefix{}, fmt.Errorf("%q %w", value, errNotNetblock)
}
return netblock.Masked(), nil
}
addr, err := netip.ParseAddr(value)
if err != nil || addr.Zone() != "" {
return netip.Prefix{}, fmt.Errorf("%q %w", value, errNotNetblock)
}
return netip.PrefixFrom(addr, addr.BitLen()), nil
}
// ParseASN reads an AS number such as AS64496, in either case, and
// returns it as the lookup gives it: AS and the number, in capitals and
// without leading zeros. The file SWW_WAF_ASN_LIMIT_PERCENT_URL names is
// read with it too.
func ParseASN(value string) (string, error) {
digits, hasAS := strings.CutPrefix(strings.ToUpper(value), "AS")
number, err := strconv.ParseUint(digits, 10, 32)
if !hasAS || err != nil {
return "", fmt.Errorf("%q %w", value, errNotASN)
}
return "AS" + strconv.FormatUint(number, 10), nil
}
// ParsePercent reads a percentage, a whole number from 0 to 100. The file
// SWW_WAF_ASN_LIMIT_PERCENT_URL names is read with it too.
func ParsePercent(value string) (int64, error) {
percent, err := strconv.ParseInt(value, 10, 64)
if err != nil || percent < 0 || percent > 100 {
return 0, fmt.Errorf("%q %w", value, errNotPercent)
}
return percent, nil
}
// withoutComment returns line without anything after a ; or a #, and
// without the spaces around what is left.
func withoutComment(line string) string {
+11 -3
View File
@@ -20,6 +20,7 @@ import (
"net/url"
"slices"
"strings"
"sync"
"time"
"sneak.berlin/go/smallwebwaf/internal/config"
@@ -113,7 +114,11 @@ func New(params Params) *Server {
// which SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS bounds. Any report after this call
// is dropped: that of a WebSocket that closes while rproxy stops, for one.
func (s *Server) WaitForReports() {
s.h.reports.stopAndWait()
s.h.reportsMu.Lock()
s.h.reportsStopped = true
s.h.reportsMu.Unlock()
s.h.reports.Wait()
}
// handler is the proxy. It holds what every request shares; what belongs to
@@ -133,8 +138,11 @@ type handler struct {
// the time.
breaker breaker
breakerClock func() time.Time
// reports are the goroutines sending reports to waf.
reports reportGoroutines
// reports waits for the reports being sent. reportsMu guards starting one
// against reportsStopped, which is set once nothing is to wait for another.
reports sync.WaitGroup
reportsMu sync.Mutex
reportsStopped bool
}
// newTransport returns what carries requests to the app. It never goes through
+8 -33
View File
@@ -10,7 +10,6 @@ import (
"maps"
"net/http"
"strings"
"sync"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
@@ -254,7 +253,14 @@ func (rq *request) answerWith(answer *wafAnswer) {
// visitor does not wait for it. The report goes on after ctx, the request's own
// context, has ended.
func (h *handler) sendReport(ctx context.Context, report *waf.Report) {
h.reports.startUnlessStopped(func() {
h.reportsMu.Lock()
defer h.reportsMu.Unlock()
if h.reportsStopped {
return
}
h.reports.Go(func() {
err := h.postReport(context.WithoutCancel(ctx), report)
if err != nil {
h.processLog.Warn("a report is dropped", "error", err.Error())
@@ -262,37 +268,6 @@ func (h *handler) sendReport(ctx context.Context, report *waf.Report) {
})
}
// reportGoroutines are the goroutines sending reports to waf. None starts once
// stopAndWait has been called.
type reportGoroutines struct {
mu sync.Mutex
stopped bool
running sync.WaitGroup
}
// startUnlessStopped runs send on a goroutine of its own, or drops it once
// stopAndWait has been called.
func (g *reportGoroutines) startUnlessStopped(send func()) {
g.mu.Lock()
defer g.mu.Unlock()
if g.stopped {
return
}
g.running.Go(send)
}
// stopAndWait stops any more goroutines from starting, and returns once those
// running have ended.
func (g *reportGoroutines) stopAndWait() {
g.mu.Lock()
g.stopped = true
g.mu.Unlock()
g.running.Wait()
}
// postReport posts report to waf, and waits for its answer for up to
// SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS.
func (h *handler) postReport(ctx context.Context, report *waf.Report) error {
+21 -50
View File
@@ -18,12 +18,11 @@ import (
"slices"
"strings"
"sync/atomic"
"time"
"github.com/fsnotify/fsnotify"
"golang.org/x/net/http/httpguts"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/dirwatch"
)
// The actions a rule takes when it matches.
@@ -40,12 +39,6 @@ const (
// extension ends the name of every rule file.
const extension = ".rules"
// quietTime is how long SWW_WAF_RULE_FILES_DIR must go without a change before
// the rule files are read again, so that a file still being written, such
// as one saved in place, appended to or copied in with scp, is read only
// once whole.
const quietTime = 2 * time.Second
// headerTarget starts the target that is one request header,
// header:<Name>.
const headerTarget = "header:"
@@ -176,26 +169,18 @@ func (f *Files) Len() int {
}
// Watch watches Dir until ctx is done, and reads the rule files again
// once Dir has had no change for quietTime, after one is edited, added or
// removed, and after Watch starts watching. If they then hold an error,
// the rules stay as they were, the error is logged with its file and
// line, and the files are read again after the next change. If Dir cannot
// be watched, that is logged, and the rules stay as they were loaded.
// While Enabled is false, Watch returns at once.
// once Dir has had no change for a short time, after one is edited, added
// or removed, and after Watch starts watching, as dirwatch describes. If
// they then hold an error, the rules stay as they were, the error is
// logged with its file and line, and the files are read again after the
// next change. If Dir cannot be watched, that is logged, and the rules
// stay as they were loaded. While Enabled is false, Watch returns at once.
func (f *Files) Watch(ctx context.Context) {
if !f.params.Enabled {
return
}
watcher, err := fsnotify.NewWatcher()
if err == nil {
defer func() {
_ = watcher.Close()
}()
err = watcher.Add(f.params.Dir)
}
watcher, err := dirwatch.New(f.params.Dir)
if err != nil {
f.params.ProcessLog.Error("cannot watch the rule files for edits",
"error", err.Error())
@@ -203,36 +188,22 @@ func (f *Files) Watch(ctx context.Context) {
return
}
defer func() {
_ = watcher.Close()
}()
f.params.ProcessLog.Info("watching the rule files for edits",
"directory", f.params.Dir)
f.readAfterChanges(ctx, watcher.Events, watcher.Errors)
}
// readAfterChanges reads the rule files again once quietTime has passed
// without a change from events, until ctx is done, and logs the errors
// from errs. The wait starts at once, as if for a change, so that an edit
// saved after Load read the files, and before Dir was watched, is taken
// in too.
func (f *Files) readAfterChanges(
ctx context.Context, events <-chan fsnotify.Event, errs <-chan error,
) {
quiet := time.NewTimer(quietTime)
defer quiet.Stop()
for {
select {
case <-ctx.Done():
return
case <-events:
quiet.Reset(quietTime)
case <-quiet.C:
f.readAgain()
case err := <-errs:
// A change to any file in Dir counts.
watcher.CallWhenQuiet(ctx,
func(string) bool { return true },
f.readAgain,
func(err error) {
f.params.ProcessLog.Warn("watching the rule files failed",
"error", err.Error())
}
}
},
)
}
// readAgain reads the rule files again, in place of the rules loaded, or
@@ -378,7 +349,7 @@ func parse(line string) (Rule, bool, error) {
rule.Target,
errNotTarget,
)
case isHeader && !config.IsHeaderName(headerName):
case isHeader && !httpguts.ValidHeaderFieldName(headerName):
return Rule{}, false, fmt.Errorf(
"the target %q %w",
rule.Target,
-165
View File
@@ -1,165 +0,0 @@
package rules
import (
"context"
"log/slog"
"net/http"
"net/http/httptest"
"os"
"path/filepath"
"slices"
"testing"
"testing/synctest"
"time"
"github.com/fsnotify/fsnotify"
"sneak.berlin/go/smallwebwaf/internal/alerts"
)
// The tests below run readAfterChanges in a synctest bubble, where time is
// a clock of the test's own: time.Sleep moves it on at once, and
// synctest.Wait returns once readAfterChanges waits again, so that every
// reading due by then is done. The test sends the changes itself, as the
// watch of a directory cannot run in a bubble.
func TestFileWrittenInTwoPartsTakenInOnlyWhole(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
dir := t.TempDir()
path := filepath.Join(dir, "50-app.rules")
writeFile(t, path, "first path block ^/first\n")
files := load(t, dir)
changes := run(t, files)
file, err := os.Create(path) //nolint:gosec // a file the test wrote
if err != nil {
t.Fatalf("create: %v", err)
}
defer func() {
_ = file.Close()
}()
// The first part ends in the middle of a ban rule's regex, which,
// read then, would ban every request.
write(t, file, "first path block ^/first\nprobe path ban ^/")
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
wantMatched(t, files, "/anything")
// The second part starts the wait again.
write(t, file, `\.env$`+"\n")
changes <- fsnotify.Event{Name: path, Op: fsnotify.Write}
time.Sleep(quietTime - time.Nanosecond)
synctest.Wait()
wantMatched(t, files, "/.env")
time.Sleep(time.Nanosecond)
synctest.Wait()
wantMatched(t, files, "/.env", "probe")
wantMatched(t, files, "/anything")
})
}
func TestEditSavedBeforeTheWatchStartsTakenIn(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
dir := t.TempDir()
path := filepath.Join(dir, "50-app.rules")
writeFile(t, path, "first path block ^/first\n")
files := load(t, dir)
// Saved after Load read the files, and before the directory was
// watched, so that no change is seen for it.
writeFile(t, path, "first path block ^/edited\n")
run(t, files)
time.Sleep(quietTime)
synctest.Wait()
wantMatched(t, files, "/edited", "first")
})
}
// load loads the rules in dir.
func load(t *testing.T, dir string) *Files {
t.Helper()
files, err := Load(Params{
Dir: dir, Enabled: true, ProcessLog: slog.New(slog.DiscardHandler),
Alerts: alerts.New(alerts.Params{}),
})
if err != nil {
t.Fatalf("load: %v", err)
}
return files
}
// run runs files' readAfterChanges until the test ends, and returns the
// channel that sends it changes.
func run(t *testing.T, files *Files) chan<- fsnotify.Event {
t.Helper()
changes := make(chan fsnotify.Event)
ctx, stop := context.WithCancel(t.Context())
stopped := make(chan struct{})
go func() {
files.readAfterChanges(ctx, changes, nil)
close(stopped)
}()
t.Cleanup(func() {
stop()
<-stopped
})
return changes
}
// writeFile writes content to the file at path.
func writeFile(t *testing.T, path, content string) {
t.Helper()
err := os.WriteFile(path, []byte(content), 0o600)
if err != nil {
t.Fatalf("write %s: %v", path, err)
}
}
// write writes text to the end of file.
func write(t *testing.T, file *os.File, text string) {
t.Helper()
_, err := file.WriteString(text)
if err != nil {
t.Fatalf("write: %v", err)
}
}
// wantMatched checks the ids of the rules that a GET request for path
// matches, in order.
func wantMatched(t *testing.T, files *Files, path string, want ...string) {
t.Helper()
r := httptest.NewRequestWithContext(t.Context(), http.MethodGet,
"http://app.example"+path, nil)
matched := files.Match(r)
got := make([]string, 0, len(matched))
for _, rule := range matched {
got = append(got, rule.ID)
}
if !slices.Equal(got, want) {
t.Errorf("%s matched %v, want %v", path, got, want)
}
}