Compare commits

..
Author SHA1 Message Date
sneak 5a73af61b0 sww: wire the daemons with fx (closes #414)
check / check (push) Waiting to run
go.uber.org/fx builds the parts of waf and rproxy in internal/sww, one
provider per part. Each background loop is a lifecycle hook added where
its part is built. waf.Params takes every part built, and waf.New builds
none. GeoJS calls back into waf, so waf exports AddLookup and
GeoJSFailed, and clientGroup and banNetblock take the settings.

newServer, loadStateFiles, the inBackground list and serveRProxy are
gone. serve is the one hook that serves both daemons, and reports a
failure to run on a channel of its own; fx's signal handling is not
used. Once fx has stopped, run takes each daemon's last step: waf writes
the state files, and rproxy waits for its reports.

Model: opus-5-5
2026-11-19 09:59:52 +00:00
clawbot 9f42460f70 Say the anomaly thresholds only send an alert (closes #412)
check / check (push) Waiting to run
Each SWW_WAF_ANOMALY_ threshold's description now says crossing it sends
one alert to the alert destinations and bans, rate limits and blocks no
client. The prefix and watched-netblock settings say their thresholds
only alert. README's configuration notes and docs/settings.md explain
"anomaly" once.

Model: opus-5-5
2026-11-19 10:58:27 +01:00
clawbot 9cb8f362bc sww: lift waf's check time limit and rproxy's wait in tests (closes #418)
check / check (push) Waiting to run
Under heavy host load the sww tests got 503 where they expected 200 or
403: waf refused requests whose trap paths, rule files and Core Rule Set
took longer than 500 ms, and rproxy gave up on waf after 2 s.

waf.Params and sww.Params gain BesideLookupTimeLimit; zero keeps the
500 ms limit, so the binary is unchanged. The sww tests' run gives waf
an hour, and startRProxy sets SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS to
60000, as the rproxy package's tests do. waf's own tests set the limit
through the new field instead of SetBesideLookupTimeLimit, which is gone.

Model: opus-5-5
2026-11-19 10:44:53 +01:00
clawbot 48edab5dad Test rproxy's 32 KiB header limit at its edge (closes #415)
check / check (push) Waiting to run
The limit was already a constant with no setting. These tests pin it:
a request line and headers of exactly 32 KiB reach the app, and one
byte more is answered 431 with the connection closed and waf not asked.

Model: opus-5-5
2026-11-19 10:20:07 +01:00
26 changed files with 1093 additions and 672 deletions

No files matched your search

+29 -23
View File
@@ -284,6 +284,10 @@ account, a key, a token or an alert destination stays off until you give one.
`SWW_WAF_BYTES_COUNTED` says. Headers are never counted. What the visitor sent
over a WebSocket counts as request bytes, and what the app sent as response
bytes.
- An anomaly is more requests or bytes than an `SWW_WAF_ANOMALY_` threshold
allows. Crossing a threshold sends one `anomaly` alert to the alert
destinations, and does nothing else: no client is banned, rate limited or
blocked.
- An invalid setting stops the process at start with one log line naming the
variable and what is wrong with the value. The settings in effect are logged
on one line at start, with tokens, keys and webhook paths shown as `********`.
@@ -384,29 +388,29 @@ Every setting the code reads, with its default:
| `SWW_WAF_ALERT_EVENTS` | `ban,permanent_ban,core_rule_set_match,anomaly,reputation_hit,source_failure,file_error` | The events alerts are sent for; the hourly `summary` is sent whatever it says. |
| `SWW_WAF_ALERT_COOLDOWN` | `15m` | How long after an alert its repeats are held back and counted, a duration or `off`. |
| `SWW_WAF_ALERT_MAX_PER_HOUR` | `60` | The most alerts sent in an hour, a number or `off`; the rest are counted in the hour's `summary`. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Alert when one client makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Alert when one client makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one client in a minute, a size. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one client in an hour, a size. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Alert when the netblock around a client makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Alert when the netblock around a client makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the netblock around a client in a minute, a size. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the netblock around a client in an hour, a size. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Alert when one AS number makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Alert when one AS number makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one AS number in a minute, a size. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for one AS number in an hour, a size. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Alert when the whole service gets more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Alert when the whole service gets more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the whole service in a minute, a size. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for the whole service in an hour, a size. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Alert when a watched netblock makes more requests than this in a minute, a count. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Alert when a watched netblock makes more requests than this in an hour, a count. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for a watched netblock in a minute, a size. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Alert when more than this many bytes, as `SWW_WAF_BYTES_COUNTED` counts them, are counted for a watched netblock in an hour, a size. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
[`docs/settings.md`](docs/settings.md) gives the values each setting takes in
full, and the limits that are fixed rather than settings.
@@ -750,6 +754,8 @@ stops the running process (see [`docs/state-files.md`](docs/state-files.md)).
- `cmd/sww`: the binary, which only calls `internal/sww`.
- `internal/sww`: the process, as the command it is given, and the health check.
It is the only package that imports `go.uber.org/fx`, which builds the parts
of `waf` and `rproxy`.
- `internal/config`: reads the settings, the one place they are read.
- `internal/rproxy`: the reverse proxy in front of one app.
- `internal/waf`: `waf`'s server, which runs the checks and answers its own
+3 -1
View File
@@ -69,7 +69,9 @@ never as a time.
that command's settings, and runs `internal/rproxy` until `SIGTERM` or
`SIGINT` (see "`rproxy`"). `sww healthcheck` is the image's health check.
With no command, or one it does not know, the binary prints the commands
and exits with status 2.
and exits with status 2. `internal/sww` is the only package that imports
`go.uber.org/fx`. fx builds the parts of `waf` and `rproxy`, and starts
and stops their background work.
- `internal/config`: reads the settings, the one place they are read.
- `internal/waf`: `waf`'s server. It runs the checks in `check`, and holds
`waf`'s question, answer and report. It answers `waf`'s own endpoints in
+5
View File
@@ -364,6 +364,11 @@ tag that no request can get stops the start. A request can get only these:
## Anomaly thresholds
An anomaly is more requests or bytes than one of these thresholds allows.
Crossing a threshold sends one `anomaly` alert to the destinations under
"Alerting", and does nothing else: no client is banned, rate limited or blocked.
`SWW_WAF_ALERT_COOLDOWN` holds back repeats of that alert.
Each scope has four thresholds: the most requests and the most body bytes
counted in a minute and in an hour. The bytes are those `SWW_WAF_BYTES_COUNTED`
names. Requests are counts, bytes are sizes. Each is `off` by default. The four
+4
View File
@@ -12,6 +12,7 @@ require (
github.com/oschwald/maxminddb-golang/v2 v2.7.0
github.com/prometheus/client_golang v1.24.1
github.com/spf13/viper v1.21.0
go.uber.org/fx v1.24.0
golang.org/x/sys v0.48.0
)
@@ -44,6 +45,9 @@ require (
github.com/tidwall/match v1.1.1 // indirect
github.com/tidwall/pretty v1.2.1 // indirect
github.com/valllabh/ocsf-schema-golang v1.0.3 // indirect
go.uber.org/dig v1.19.0 // indirect
go.uber.org/multierr v1.10.0 // indirect
go.uber.org/zap v1.26.0 // indirect
go.yaml.in/yaml/v3 v3.0.5 // indirect
go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect
golang.org/x/net v0.60.0 // indirect
+8
View File
@@ -97,8 +97,16 @@ github.com/tidwall/pretty v1.2.1 h1:qjsOFOWWQl+N3RsoF5/ssm1pHmJJwhjlSbZ51I6wMl4=
github.com/tidwall/pretty v1.2.1/go.mod h1:ITEVvHYasfjBbM0u2Pg8T2nJnzm8xPwvNhhsoaGGjNU=
github.com/valllabh/ocsf-schema-golang v1.0.3 h1:eR8k/3jP/OOqB8LRCtdJ4U+vlgd/gk5y3KMXoodrsrw=
github.com/valllabh/ocsf-schema-golang v1.0.3/go.mod h1:sZ3as9xqm1SSK5feFWIR2CuGeGRhsM7TR1MbpBctzPk=
go.uber.org/dig v1.19.0 h1:BACLhebsYdpQ7IROQ1AGPjrXcP5dF80U3gKoFzbaq/4=
go.uber.org/dig v1.19.0/go.mod h1:Us0rSJiThwCv2GteUN0Q7OKvU7n5J4dxZ9JKUXozFdE=
go.uber.org/fx v1.24.0 h1:wE8mruvpg2kiiL1Vqd0CC+tr0/24XIB10Iwp2lLWzkg=
go.uber.org/fx v1.24.0/go.mod h1:AmDeGyS+ZARGKM4tlH4FY2Jr63VjbEDJHtqXTGP5hbo=
go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
go.uber.org/multierr v1.10.0 h1:S0h4aNzvfcFsC3dRF1jLoaov7oRaKqRGC/pUEJ2yvPQ=
go.uber.org/multierr v1.10.0/go.mod h1:20+QtiLqy0Nd6FdQB9TLXag12DsQkrbs3htMFfDN80Y=
go.uber.org/zap v1.26.0 h1:sI7k6L95XOKS281NhVKOFCUNIvv9e0w4BF8N3u+tCRo=
go.uber.org/zap v1.26.0/go.mod h1:dtElttAiwGvoJ/vj4IwHBS/gXsEu/pZ50mUIRWuG0so=
go.yaml.in/yaml/v2 v2.4.4 h1:tuyd0P+2Ont/d6e2rl3be67goVK4R6deVxCUX5vyPaQ=
go.yaml.in/yaml/v2 v2.4.4/go.mod h1:gMZqIpDtDqOfM0uNfy0SkpRhvUryYH0Z6wdMYcacYXQ=
go.yaml.in/yaml/v3 v3.0.5 h1:N6y/pJk8buWs9NY5ERU2HSMfm+IuD/OtfdAnq6kESPw=
+53
View File
@@ -71,6 +71,59 @@ func TestServerHasTheFixedLimits(t *testing.T) {
}
}
// getOfSize is a GET whose request line and headers, the blank line that ends
// them included, are size bytes long.
func getOfSize(size int) string {
const start, end = "GET / HTTP/1.1\r\nHost: site.example\r\nX-Pad: ", "\r\n\r\n"
return start + strings.Repeat("x", size-len(start)-len(end)) + end
}
func TestARequestLineAndHeadersOf32KiBReachTheApp(t *testing.T) {
t.Parallel()
standIn := startWAF(t, allow)
app := startApp(t, greet)
addr, _ := startRProxy(t, standIn.URL, app.URL, nil)
conn := dial(t, addr)
send(t, conn, getOfSize(32<<10))
if status := readStatus(t, conn); status != http.StatusOK {
t.Errorf("status %d, want the app's 200", status)
}
}
func TestARequestLineAndHeadersOver32KiBAreRefusedAndTheConnectionClosed(
t *testing.T,
) {
t.Parallel()
standIn := startWAF(t, allow)
app := startApp(t, func(http.ResponseWriter, *http.Request) {
t.Error("the app was asked")
})
addr, _ := startRProxy(t, standIn.URL, app.URL, nil)
conn := dial(t, addr)
send(t, conn, getOfSize(32<<10+1))
// io.ReadAll returns without an error only once rproxy has closed the
// connection.
text, err := io.ReadAll(conn)
if err != nil || !strings.HasPrefix(string(text), "HTTP/1.1 431 ") {
t.Errorf(
"read %q (%v), want 431 and the connection closed",
text,
err,
)
}
if len(standIn.questions) != 0 {
t.Error("waf was asked")
}
}
func TestABodyAnnouncedOverItsLimitIsRefusedOnceWAFAllowsIt(t *testing.T) {
t.Parallel()
+198
View File
@@ -0,0 +1,198 @@
package sww
import (
"context"
"errors"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"go.uber.org/fx/fxevent"
)
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// requestLog is where a daemon's server writes the request log: stdout, and
// the remote log sender while there is one. fx tells parts apart by type, so
// it has a type of its own.
type requestLog struct {
io.Writer
}
// servingFailed gets why serving failed, for run, which then stops the
// daemon. fx tells parts apart by type, so it has a type of its own.
type servingFailed chan error
// utcNow is the time the state files, the alerts and the rate limits go by.
func utcNow() time.Time {
return time.Now().UTC()
}
// startError is why a daemon cannot start: the message its process log gives,
// and the error it logs with it.
type startError struct {
message string
err error
}
func (e startError) Error() string {
return e.message + ": " + e.err.Error()
}
func (e startError) Unwrap() error {
return e.err
}
// cannotStart logs why a daemon cannot start, with the message of the
// startError in err, and returns its exit status.
func cannotStart(processLog *slog.Logger, err error) int {
message, cause := "cannot start", err
failed, ok := errors.AsType[startError](err)
if ok {
message, cause = failed.message, failed.err
}
processLog.Error(message, "error", cause.Error())
return 1
}
// listen listens on address, which the setting names.
func listen(address, setting string) (net.Listener, error) {
listener, err := (&net.ListenConfig{}).Listen(
context.Background(), "tcp", address)
if err != nil {
return nil, startError{"cannot listen on " + setting, err}
}
return listener, nil
}
// background returns the hook that runs loop on a goroutine of its own from
// the start, and at the stop ends it and waits for it to return.
func background(loop func(context.Context)) fx.Hook {
running, stop := context.WithCancel(context.Background())
ended := make(chan struct{})
return fx.StartStopHook(
func() {
go func() {
loop(running)
close(ended)
}()
},
func() {
stop()
<-ended
},
)
}
// serve serves requests on listener from the start. At the stop it gives the
// requests in progress shutdownTimeout to finish, then closes their
// connections. When serving fails, it logs why and sends the error to
// failed.
func serve(
lc fx.Lifecycle, server *http.Server, listener net.Listener,
processLog *slog.Logger, failed servingFailed,
) {
served := make(chan error, 1)
lc.Append(fx.Hook{
OnStart: func(context.Context) error {
go func() {
err := server.Serve(listener)
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
failed <- err
}
served <- err
}()
return nil
},
OnStop: func(ctx context.Context) error {
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(ctx, shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
return err
}
return nil
},
})
}
// run starts app, which serves until ctx is done or serving fails, as
// failed tells. Then it stops app and takes the daemon's last step. It
// returns the process's exit status, 1 when serving failed, a part could
// not stop in order or the last step failed; each logs why.
func run(
ctx context.Context, app *fx.App, failed servingFailed,
processLog *slog.Logger, lastStep func() error,
) int {
// The hooks only start goroutines, and end them at the stop, so neither
// is cut short by a deadline or by ctx.
err := app.Start(context.WithoutCancel(ctx))
if err != nil {
return cannotStart(processLog, err)
}
status := 0
select {
case <-ctx.Done():
case <-failed:
status = 1
}
err = app.Stop(context.WithoutCancel(ctx))
if err != nil {
status = 1
}
err = lastStep()
if err != nil {
status = 1
}
if status == 0 {
processLog.Info("stopped")
}
return status
}
// fxEventLogger returns what fx.WithLogger takes to write fx's own events to
// processLog at debug, which the daemons' log levels normally hold back. Its
// errors are at debug too: the daemon logs each one itself.
func fxEventLogger(processLog *slog.Logger) func() fxevent.Logger {
return func() fxevent.Logger {
logger := &fxevent.SlogLogger{Logger: processLog}
logger.UseLogLevel(slog.LevelDebug)
logger.UseErrorLevel(slog.LevelDebug)
return logger
}
}
+42 -63
View File
@@ -2,12 +2,13 @@ package sww
import (
"context"
"errors"
"log/slog"
"net"
"net/http"
"os"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rproxy"
@@ -30,26 +31,31 @@ func RunRProxy(ctx context.Context, params Params) int {
cfg, err := config.RProxyFromEnvironment(params.Viper)
if err != nil {
processLog.Error("invalid setting", "error", err.Error())
return 1
return cannotStart(processLog, startError{"invalid setting", err})
}
server := rproxy.New(rproxy.Params{
Config: cfg,
RequestLog: params.Stdout,
ProcessLog: processLog,
})
var (
server *rproxy.Server
listener net.Listener
)
listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
failed := make(servingFailed, 1)
app := fx.New(
fx.Supply(cfg, processLog, requestLog{params.Stdout}, failed),
fx.Provide(
newRProxyServer,
func(server *rproxy.Server) *http.Server { return server.Server },
newRProxyListener,
),
fx.Invoke(serve),
fx.Populate(&server, &listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
if err != nil {
processLog.Error(
"cannot listen on SWW_RPROXY_LISTEN_ADDR",
"error",
err.Error(),
)
return 1
return cannotStart(processLog, err)
}
processLog.Info("starting",
@@ -57,52 +63,25 @@ func RunRProxy(ctx context.Context, params Params) int {
"address", listener.Addr().String(),
"settings", cfg)
return serveRProxy(ctx, server, listener, processLog)
return run(ctx, app, failed, processLog, func() error {
server.WaitForReports()
return nil
})
}
// serveRProxy serves requests on listener until ctx is done, and then stops as
// RunRProxy says.
func serveRProxy(
ctx context.Context, server *rproxy.Server, listener net.Listener,
processLog *slog.Logger,
) int {
served := make(chan error, 1)
go func() {
served <- server.Serve(listener)
}()
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
server.WaitForReports()
processLog.Info("stopped")
return 0
// newRProxyServer returns the server rproxy runs.
func newRProxyServer(
cfg *config.RProxy, out requestLog, processLog *slog.Logger,
) *rproxy.Server {
return rproxy.New(rproxy.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
})
}
// newRProxyListener listens on SWW_RPROXY_LISTEN_ADDR.
func newRProxyListener(cfg *config.RProxy) (net.Listener, error) {
return listen(cfg.ListenAddr, "SWW_RPROXY_LISTEN_ADDR")
}
+2 -397
View File
@@ -4,17 +4,14 @@
// stop, and then stops in an orderly way, writing the state and cache files.
// `sww rproxy` reads rproxy's settings alone, and runs the reverse proxy in
// front of one app that asks waf about each request. `sww healthcheck` is the
// container's health check.
// container's health check. fx builds the parts of each daemon, starts their
// background work and stops it.
package sww
import (
"context"
"errors"
"fmt"
"io"
"log/slog"
"net"
"net/http"
"os"
"os/signal"
"syscall"
@@ -22,29 +19,9 @@ import (
"github.com/spf13/viper"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
// shutdownTimeout is how long requests in progress may take to finish
// once sww is told to stop, before their connections are closed.
// runit and docker wait a little longer before they kill the process.
const shutdownTimeout = 5 * time.Second
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// usageStatus is the exit status with no command, or one sww does not
// know.
const usageStatus = 2
@@ -110,375 +87,3 @@ func printUsage(w io.Writer) int {
return usageStatus
}
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. It returns the process's exit status, 1 when waf cannot start.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := requestlog.NewProcessLogger(params.Stdout,
config.InstanceName(params.Viper), slog.LevelError)
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, "invalid setting", err)
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = requestlog.NewProcessLogger(
stdout,
cfg.InstanceName,
cfg.LogLevel,
)
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
return runWAFWithSettings(
ctx,
params,
cfg,
stdout,
remote,
processLog,
)
}
// runWAFWithSettings is the rest of RunWAF once the settings are read and
// the process log goes where they say. remote is nil unless
// SWW_WAF_LOG_REMOTE_URL is set.
func runWAFWithSettings(
ctx context.Context,
params Params,
cfg *config.WAF,
stdout io.Writer,
remote *remotelog.Sender,
processLog *slog.Logger,
) int {
// The state files and the alerts give times in UTC.
now := func() time.Time { return time.Now().UTC() }
alertQueue := newAlertQueue(cfg, now, processLog)
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return cannotStart(processLog, "cannot use the rule files", err)
}
crs, err := waf.NewCoreRuleSet(cfg)
if err != nil {
return cannotStart(processLog, "cannot use the Core Rule Set", err)
}
server, err := newServer(
cfg,
stdout,
processLog,
now,
ruleFiles,
alertQueue,
crs,
params.BesideLookupTimeLimit,
)
if err != nil {
return cannotStart(processLog, "cannot use the lookup database", err)
}
if remote != nil {
server.Metrics.AddRemoteLog(remote)
}
files, err := loadStateFiles(cfg, server, alertQueue, now, processLog)
if err != nil {
return cannotStart(
processLog,
"cannot use the state and cache files",
err,
)
}
listener, err := (&net.ListenConfig{}).Listen(ctx, "tcp", cfg.ListenAddr)
if err != nil {
return cannotStart(
processLog,
"cannot listen on SWW_WAF_LISTEN_ADDR",
err,
)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
return serve(
ctx,
server,
listener,
files,
ruleFiles,
alertQueue,
processLog,
)
}
// cannotStart logs why waf cannot start, and returns its exit status.
func cannotStart(processLog *slog.Logger, message string, err error) int {
processLog.Error(message, "error", err.Error())
return 1
}
// newServer returns the server waf runs, with the metrics of the alerts,
// after reading the lookup database while SWW_WAF_LOOKUP_SOURCE is file. A lookup
// database that cannot be read is an error.
func newServer(
cfg *config.WAF, stdout io.Writer, processLog *slog.Logger,
now func() time.Time, ruleFiles *rules.Files, alertQueue *alerts.Queue,
crs *coreruleset.CoreRuleSet, besideLookupTimeLimit time.Duration,
) (*waf.Server, error) {
var lookupFile *lookup.File
if cfg.LookupSource == "file" {
var err error
lookupFile, err = lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, err
}
}
server := waf.New(waf.Params{
Config: cfg,
RequestLog: stdout,
ProcessLog: processLog,
GeoJSURL: geojs.URL,
AbuseIPDBURL: reputation.AbuseIPDBURL,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: besideLookupTimeLimit,
})
server.Metrics.AddAlerts(alertQueue)
if lookupFile != nil {
server.Metrics.AddLookupFile(
lookupFile.LastRead,
lookupFile.ReadFailures,
)
}
return server, nil
}
// loadStateFiles reads the state and cache files into the parts of server and
// into alertQueue, as state.Load does.
func loadStateFiles(
cfg *config.WAF, server *waf.Server, alertQueue *alerts.Queue,
now func() time.Time, processLog *slog.Logger,
) (*state.Files, error) {
return state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: server.Ledger,
Limiter: server.Limiter,
GeoJS: server.GeoJS,
Lists: server.Lists,
DNSBL: server.DNSBL,
AbuseIPDB: server.AbuseIPDB,
RouteWatch: server.RouteWatch,
Alerts: alertQueue,
Anomalies: server.Anomalies,
Now: now,
ProcessLog: processLog,
Metrics: server.Metrics,
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them.
func newAlertQueue(
cfg *config.WAF, now func() time.Time, processLog *slog.Logger,
) *alerts.Queue {
return alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: now,
ProcessLog: processLog,
})
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
// serve serves requests on listener, writes the state and cache files as they
// are due, takes in an admin's edits of them, reads the rule files again as
// they change, and the lookup database when it is replaced, fetches the
// lists the settings name by URL as they are due, and sends the alerts,
// until ctx is done. Then it gives the requests in progress
// shutdownTimeout to finish, and writes every state and cache file,
// alerts.json with the alerts still waiting.
func serve(
ctx context.Context, server *waf.Server, listener net.Listener,
files *state.Files, ruleFiles *rules.Files, alertQueue *alerts.Queue,
processLog *slog.Logger,
) int {
served := make(chan error, 1)
go func() {
served <- server.Serve(listener)
}()
writing, stopWriting := context.WithCancel(ctx)
defer stopWriting()
written := inBackground(func() { files.Run(writing) })
watched := inBackground(func() { files.Watch(writing) })
rulesWatched := inBackground(func() { ruleFiles.Watch(writing) })
lookupFileWatched := inBackground(func() {
if server.LookupFile != nil {
server.LookupFile.Watch(writing)
}
})
listsFetched := inBackground(func() { server.Lists.Run(writing) })
alertsSent := inBackground(func() { alertQueue.Run(writing) })
select {
case err := <-served:
processLog.Error("serving failed", "error", err.Error())
return 1
case <-ctx.Done():
}
processLog.Info("stopping")
shutdownCtx, cancel := context.WithTimeout(context.WithoutCancel(ctx),
shutdownTimeout)
defer cancel()
err := server.Shutdown(shutdownCtx)
if err != nil {
processLog.Warn("requests still in progress were cut off",
"error", err.Error())
_ = server.Close()
}
err = <-served
if !errors.Is(err, http.ErrServerClosed) {
processLog.Error("serving failed", "error", err.Error())
return 1
}
// Run and Watch have ended, so nothing else reads or writes the
// files, and no alert is being sent, so that alerts.json keeps every
// alert not yet sent. Every request has ended too, but for one cut off
// because Shutdown timed out, which adds to its client's history only as
// it ends. That can be after this write, and then that request is missing
// from clients.json.
<-written
<-watched
<-rulesWatched
<-lookupFileWatched
<-listsFetched
<-alertsSent
err = files.WriteAll()
if err != nil {
processLog.Error(
"writing the state and cache files failed",
"error",
err.Error(),
)
return 1
}
processLog.Info("stopped")
return 0
}
// inBackground runs task on a goroutine of its own, and returns a channel
// that is closed once task has returned.
func inBackground(task func()) <-chan struct{} {
done := make(chan struct{})
go func() {
task()
close(done)
}()
return done
}
+490
View File
@@ -0,0 +1,490 @@
package sww
import (
"context"
"io"
"log/slog"
"net"
"net/http"
"time"
"go.uber.org/fx"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/remotelog"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/state"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
// remoteLogStopTimeout is how long, as waf stops, the log lines still
// waiting are sent to SWW_WAF_LOG_REMOTE_URL before they are given up. stdout has
// carried them.
const remoteLogStopTimeout = 2 * time.Second
// RunWAF is `sww waf`: it reads the settings, the rule files,
// the lookup database and the state and cache files, then serves requests until
// ctx is done. Then it gives the requests in progress shutdownTimeout to
// finish, ends its background work and writes every state and cache file,
// alerts.json with the alerts still waiting. It returns the process's exit
// status, 1 when waf cannot start or stop in order.
func RunWAF(ctx context.Context, params Params) int {
// Until the settings are read, the one message is an invalid setting's
// error, which every SWW_WAF_LOG_LEVEL lets through.
processLog := requestlog.NewProcessLogger(params.Stdout,
config.InstanceName(params.Viper), slog.LevelError)
cfg, err := config.WAFFromEnvironment(params.Viper)
if err != nil {
return cannotStart(processLog, startError{"invalid setting", err})
}
// While SWW_WAF_LOG_REMOTE_URL is set, every line on stdout from here on
// is sent there too. The sender runs before any part is built, so that it
// sends why waf cannot start.
stdout := params.Stdout
var remote *remotelog.Sender
if cfg.LogRemoteURL != nil {
remote = newRemoteLogSender(cfg)
stdout = io.MultiWriter(params.Stdout, remote)
}
processLog = requestlog.NewProcessLogger(
stdout,
cfg.InstanceName,
cfg.LogLevel,
)
if remote != nil {
stopSending := startSending(ctx, remote, processLog)
defer stopSending()
}
var (
files *state.Files
listener net.Listener
)
failed := make(servingFailed, 1)
app := fx.New(
fx.Supply(
params,
cfg,
processLog,
requestLog{stdout},
remote,
failed,
),
fx.Provide(
newAlertQueue, newRuleFiles, newCoreRuleSet, newLookupFile,
newLimiter, newLedger, newAnomalyCounters,
newLists, newDNSBL, newAbuseIPDB, newRouteWatch,
newMetrics, newGeoJS, newWAFServer,
func(server *waf.Server) *http.Server { return server.Server },
newWAFListener, newStateFiles,
),
// fx stops hooks in the reverse of the order they were added in. The
// state files are read before serving is set up, so that serving
// stops before their loops do.
fx.Populate(&files),
fx.Invoke(serve),
fx.Populate(&listener),
fx.WithLogger(fxEventLogger(processLog)),
)
err = app.Err()
if err != nil {
return cannotStart(processLog, err)
}
processLog.Info("starting",
"version", params.Version,
"address", listener.Addr().String(),
"settings", cfg)
// The last write follows the stop of every hook, and so the end of every
// loop that changes the state or raises an alert. A hook of the state
// files would stop before the loops of the parts built ahead of them.
return run(ctx, app, failed, processLog, func() error {
err := files.WriteAll()
if err != nil {
processLog.Error("writing the state and cache files failed",
"error", err.Error())
}
return err
})
}
// newAlertQueue returns the queue of the alerts to the webhook, Slack and
// ntfy, with the settings for them. Until waf stops, it sends them.
func newAlertQueue(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
) *alerts.Queue {
alertQueue := alerts.New(alerts.Params{
WebhookURL: cfg.AlertWebhookURL,
WebhookHeaders: cfg.AlertWebhookHeaders,
SlackURL: cfg.AlertSlackWebhookURL,
NtfyURL: cfg.AlertNtfyURL,
NtfyToken: cfg.AlertNtfyToken,
Events: cfg.AlertEvents,
Cooldown: cfg.AlertCooldown,
MaxPerHour: cfg.AlertMaxPerHour,
Instance: cfg.InstanceName,
Now: utcNow,
ProcessLog: processLog,
})
lc.Append(background(alertQueue.Run))
return alertQueue
}
// newRuleFiles reads the rule files, and reads them again as they change
// until waf stops.
func newRuleFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*rules.Files, error) {
ruleFiles, err := rules.Load(rules.Params{
Dir: cfg.RuleFilesDir,
Enabled: cfg.RuleFilesEnabled,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the rule files", err}
}
lc.Append(background(ruleFiles.Watch))
return ruleFiles, nil
}
// newCoreRuleSet returns the Core Rule Set, as waf.NewCoreRuleSet does.
func newCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
crs, err := waf.NewCoreRuleSet(cfg)
if err != nil {
return nil, startError{"cannot use the Core Rule Set", err}
}
return crs, nil
}
// newLookupFile reads the lookup database while SWW_WAF_LOOKUP_SOURCE is
// file, and reads it again when it is replaced until waf stops. It returns
// nil while the source is anything else.
func newLookupFile(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*lookup.File, error) {
if cfg.LookupSource != "file" {
return nil, nil //nolint:nilnil // no lookup database, and no error
}
lookupFile, err := lookup.OpenFile(lookup.FileParams{
Path: cfg.LookupDBPath,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
if err != nil {
return nil, startError{"cannot use the lookup database", err}
}
lc.Append(background(lookupFile.Watch))
return lookupFile, nil
}
// newLimiter returns the table of clients, with the rate and byte limits.
func newLimiter(cfg *config.WAF) *ratelimit.Limiter {
return ratelimit.New(ratelimit.Limits{
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
}, cfg.MaxTrackedClients)
}
// newLedger returns the ledger of the bans, with the settings for them.
func newLedger(cfg *config.WAF) *bans.Ledger {
return bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
}
// newAnomalyCounters returns the counters of the anomaly thresholds.
func newAnomalyCounters(
cfg *config.WAF, alertQueue *alerts.Queue,
) *anomaly.Counters {
return anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: alertQueue,
})
}
// newLists returns the lists the settings name by URL, none fetched yet.
// Until waf stops, it fetches them as they are due.
func newLists(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) *reputation.Lists {
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(lists.Run))
return lists
}
// newDNSBL returns what asks the DNSBL zones, none asked yet.
func newDNSBL(
cfg *config.WAF, processLog *slog.Logger, alertQueue *alerts.Queue,
) *reputation.DNSBL {
return reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
}
// newAbuseIPDB returns what checks clients with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, none checked yet.
func newAbuseIPDB(
cfg *config.WAF, processLog *slog.Logger, alertQueue *alerts.Queue,
) *reputation.AbuseIPDB {
return reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: reputation.AbuseIPDBURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
}
// newRouteWatch returns what asks routewatch about clients, or nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
func newRouteWatch(
cfg *config.WAF, processLog *slog.Logger,
) *routewatch.Client {
if cfg.RouteWatchURL == "" {
return nil
}
return routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: utcNow,
ProcessLog: processLog,
})
}
// newMetrics returns the metrics, with those read from the other parts as
// the metrics are asked for: AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set,
// the lookup database's while there is one, and the remote log sender's
// while there is one.
func newMetrics(
cfg *config.WAF, ledger *bans.Ledger, limiter *ratelimit.Limiter,
ruleFiles *rules.Files, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
alertQueue *alerts.Queue, lookupFile *lookup.File,
remote *remotelog.Sender,
) *metrics.Metrics {
m := metrics.New(cfg.MetricsBusiestCountriesAndASNs, cfg.InstanceName)
m.AddBansAndClients(ledger, limiter, utcNow)
m.AddRules(ruleFiles)
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
m.AddAlerts(alertQueue)
if lookupFile != nil {
m.AddLookupFile(lookupFile.LastRead, lookupFile.ReadFailures)
}
if remote != nil {
m.AddRemoteLog(remote)
}
return m
}
// newGeoJS returns what looks clients up at GeoJS, none looked up yet. Each
// answer goes to the limiter and the ledger, as waf.AddLookup says, and each
// failure is handled as waf.GeoJSFailed says.
func newGeoJS(
cfg *config.WAF, m *metrics.Metrics, limiter *ratelimit.Limiter,
ledger *bans.Ledger, alertQueue *alerts.Queue, processLog *slog.Logger,
) *geojs.GeoJS {
return geojs.New(geojs.Params{
URL: geojs.URL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: utcNow,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
}
// newWAFServer returns the server waf runs, with its parts and the time
// limit params gives.
func newWAFServer(
params Params, cfg *config.WAF, out requestLog, processLog *slog.Logger,
m *metrics.Metrics, limiter *ratelimit.Limiter, ledger *bans.Ledger,
anomalies *anomaly.Counters, lists *reputation.Lists,
dnsbl *reputation.DNSBL, abuseIPDB *reputation.AbuseIPDB,
routeWatch *routewatch.Client, geoJS *geojs.GeoJS,
lookupFile *lookup.File, crs *coreruleset.CoreRuleSet,
ruleFiles *rules.Files, alertQueue *alerts.Queue,
) *waf.Server {
return waf.New(waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
Metrics: m,
Limiter: limiter,
Ledger: ledger,
Anomalies: anomalies,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
GeoJS: geoJS,
LookupFile: lookupFile,
CoreRuleSet: crs,
Now: utcNow,
Rules: ruleFiles,
Alerts: alertQueue,
BesideLookupTimeLimit: params.BesideLookupTimeLimit,
})
}
// newWAFListener listens on SWW_WAF_LISTEN_ADDR.
func newWAFListener(cfg *config.WAF) (net.Listener, error) {
return listen(cfg.ListenAddr, "SWW_WAF_LISTEN_ADDR")
}
// newStateFiles reads the state and cache files into the parts and the
// alert queue, as state.Load does. Until waf stops, it writes them as they
// are due and takes in an admin's edits of them.
func newStateFiles(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
m *metrics.Metrics, ledger *bans.Ledger, limiter *ratelimit.Limiter,
geoJS *geojs.GeoJS, lists *reputation.Lists, dnsbl *reputation.DNSBL,
abuseIPDB *reputation.AbuseIPDB, routeWatch *routewatch.Client,
alertQueue *alerts.Queue, anomalies *anomaly.Counters,
) (*state.Files, error) {
files, err := state.Load(state.Params{
Dir: cfg.StateDir,
CacheDir: cfg.CacheDir,
BansWriteDelay: cfg.BansWriteDelay,
WriteInterval: cfg.StateWriteInterval,
Ledger: ledger,
Limiter: limiter,
GeoJS: geoJS,
Lists: lists,
DNSBL: dnsbl,
AbuseIPDB: abuseIPDB,
RouteWatch: routeWatch,
Alerts: alertQueue,
Anomalies: anomalies,
Now: utcNow,
ProcessLog: processLog,
Metrics: m,
})
if err != nil {
return nil, startError{"cannot use the state and cache files", err}
}
lc.Append(background(files.Run))
lc.Append(background(files.Watch))
return files, nil
}
// newRemoteLogSender returns a sender of the log lines to
// SWW_WAF_LOG_REMOTE_URL, with the settings for it.
func newRemoteLogSender(cfg *config.WAF) *remotelog.Sender {
return remotelog.New(remotelog.Params{
URL: cfg.LogRemoteURL,
RootCAs: cfg.LogRemoteTLSCAs,
BufferLines: cfg.LogRemoteBufferLines,
Facility: cfg.LogRemoteFacility,
AppName: cfg.LogRemoteAppName,
})
}
// startSending runs remote until the function it returns is called, which
// then waits at most remoteLogStopTimeout for the lines still waiting to
// be sent. Sending goes on after ctx is done, so that the lines written
// while sww stops are sent too.
func startSending(
ctx context.Context, remote *remotelog.Sender, processLog *slog.Logger,
) func() {
sending, stop := context.WithCancel(context.WithoutCancel(ctx))
sent := make(chan struct{})
go func() {
remote.Run(sending, processLog)
close(sent)
}()
return func() {
stop()
select {
case <-sent:
case <-time.After(remoteLogStopTimeout):
}
}
}
+1 -1
View File
@@ -35,7 +35,7 @@ func (abuseIPDB) check(
return nil
}
client := rq.h.clientGroup(rq.client)
client := clientGroup(rq.h.config, rq.client)
held, _ := rq.h.limiter.Client(client)
offender := held.History.Offences != ratelimit.Offences{}
+5 -5
View File
@@ -139,7 +139,7 @@ func (rq *request) addBan() {
)
if err == nil {
netblock, err = rq.h.banNetblock(toAdd.Netblock)
netblock, err = rq.h.parseBanNetblock(toAdd.Netblock)
}
if err == nil {
@@ -190,12 +190,12 @@ func (rq *request) readBanToAdd() (banToAdd, error) {
return toAdd, nil
}
// banNetblock reads value, a netblock such as 203.0.113.0/24, or a
// parseBanNetblock reads value, a netblock such as 203.0.113.0/24, or a
// client's address, which stands for the netblock a ban on that client
// covers. An IPv4-mapped netblock, such as ::ffff:203.0.113.0/120, is
// refused, since a client's address is looked up as IPv4 and a ban on it
// would refuse nothing, and so is a value with a zone.
func (h *handler) banNetblock(value string) (netip.Prefix, error) {
func (h *handler) parseBanNetblock(value string) (netip.Prefix, error) {
netblock, err := netip.ParsePrefix(value)
if err == nil {
if netblock.Addr().Is4In6() {
@@ -224,7 +224,7 @@ func (h *handler) banNetblock(value string) (netip.Prefix, error) {
return netip.Prefix{}, fmt.Errorf("netblock %q %w", value, errZone)
}
return h.netblock(addr), nil
return banNetblock(h.config, addr), nil
}
// expiry returns when a ban made at now for duration ends: duration
@@ -295,7 +295,7 @@ func (rq *request) showClient() {
Bans: state.BanEntries(rq.h.ledger.Covering(addr)),
}
client, seen := rq.h.limiter.Client(rq.h.clientGroup(addr))
client, seen := rq.h.limiter.Client(clientGroup(rq.h.config, addr))
if seen {
answer.Client = &client
}
+7 -12
View File
@@ -877,18 +877,13 @@ func TestWAFAnswersWithinTheTimeLimitWhileEveryOutsideSourceHangs(
held, _, _ := startHeldGeoJS(t)
resolver, releaseResolver := startHeldResolver(t)
server, out, _ := newWAFWith(t, func(
params waf.Params,
) *waf.Server {
params.AbuseIPDBURL = silentAbuseIPDBURL
return waf.New(params)
}, silentGeoJSURL, time.Now, map[string]string{
tagDeny: "country=KP", coreRuleSetMode: block,
dnsblZones: dnsblZone, dnsblResolver: resolver,
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt",
})
server, out, _ := newWAFWith(t, waf.New,
silentGeoJSURL, silentAbuseIPDBURL, time.Now, map[string]string{
tagDeny: "country=KP", coreRuleSetMode: block,
dnsblZones: dnsblZone, dnsblResolver: resolver,
abuseIPDBKey: accountKey,
blocklistURLs: held + "/drop.txt", asnLimitPercentURL: held + "/asn.txt",
})
// The lists are fetched outside the synctest bubble below: a wait on the
// network inside it would keep its clock from moving on.
+8 -7
View File
@@ -10,6 +10,7 @@ import (
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
@@ -121,7 +122,7 @@ func (rq *request) banForLimit(
rq.line.Offence = requestlog.OffenceLimit
rq.h.metrics.LimitHit(hit)
netblock := rq.h.netblock(rq.client)
netblock := banNetblock(rq.h.config, rq.client)
if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseLimit) {
return
@@ -157,7 +158,7 @@ func (rq *request) banForLimit(
}
ban, made := rq.h.ledger.BanForLimit(netblock, now, notes)
rq.h.limiter.Reset(rq.h.clientGroup(rq.client))
rq.h.limiter.Reset(clientGroup(rq.h.config, rq.client))
rq.line.BanExpires = banExpires(ban)
if made {
@@ -171,7 +172,7 @@ func (rq *request) banForLimit(
// no ban, and raises the alert for the ban it would have made, if that
// alert would be sent. It returns the action for that ban.
func (rq *request) banForAttack(now time.Time, notes bans.Notes) string {
netblock := rq.h.netblock(rq.client)
netblock := banNetblock(rq.h.config, rq.client)
if rq.h.config.Observe &&
!rq.wouldAlertBan(netblock, now, bans.CauseAttack) {
return banAction(
@@ -273,16 +274,16 @@ func (rq *request) netblockRequests(netblock netip.Prefix) int64 {
return rq.h.limiter.Requests(netblock) + 1
}
// netblock is the netblock a ban on client covers: its IPv4 address,
// banNetblock is the netblock a ban on client covers: its IPv4 address,
// widened to SWW_WAF_BAN_SCOPE_V4_PREFIX, or the IPv6 group clientGroup
// counts it in.
func (h *handler) netblock(client netip.Addr) netip.Prefix {
func banNetblock(cfg *config.WAF, client netip.Addr) netip.Prefix {
addr := client.Unmap()
if addr.Is4() {
return netip.PrefixFrom(addr, h.config.BanScopeV4Prefix).Masked()
return netip.PrefixFrom(addr, cfg.BanScopeV4Prefix).Masked()
}
return h.clientGroup(addr)
return clientGroup(cfg, addr)
}
// banExpires is when ban ends, as the log line gives it: a time, or
+1 -1
View File
@@ -76,7 +76,7 @@ func newWAFHoldingTheCoreRuleSet(
params.BesideLookupTimeLimit = waf.BesideLookupTimeLimit
return waf.New(params)
}, silentGeoJSURL, time.Now, settings)
}, silentGeoJSURL, abuseIPDBURL, time.Now, settings)
return server, out, queue
}
+1 -1
View File
@@ -30,7 +30,7 @@ func (byteLimits) check(
}
counts, hit, over := rq.h.limiter.CountBytes(
rq.h.clientGroup(rq.client),
clientGroup(rq.h.config, rq.client),
now,
rq.countedBytes(),
rq.bytesLimitPercent.percent,
+4 -2
View File
@@ -5,6 +5,8 @@ import (
"net/http"
"net/netip"
"slices"
"sneak.berlin/go/smallwebwaf/internal/config"
)
// peerAddress is the address of the request's TCP peer.
@@ -45,10 +47,10 @@ func scheme(r *http.Request, isQuestion bool) string {
// address, or its IPv6 group, the netblock its IPv6 address is in of the
// length SWW_WAF_IPV6_GROUP_PREFIX sets, a /64 by default, since one abuser
// usually holds a whole /64. An IPv4 address in IPv6 form counts as IPv4.
func (h *handler) clientGroup(addr netip.Addr) netip.Prefix {
func clientGroup(cfg *config.WAF, addr netip.Addr) netip.Prefix {
addr = addr.Unmap()
if addr.Is6() {
return netip.PrefixFrom(addr, h.config.IPv6GroupPrefix).Masked()
return netip.PrefixFrom(addr, cfg.IPv6GroupPrefix).Masked()
}
return netip.PrefixFrom(addr, addr.BitLen())
+1 -1
View File
@@ -108,7 +108,7 @@ func (rq *request) alertCoreRuleSetMatch(result coreruleset.Result) {
Event: alerts.EventCoreRuleSetMatch,
Host: rq.site,
Client: rq.client,
Netblock: rq.h.clientGroup(rq.client),
Netblock: clientGroup(rq.h.config, rq.client),
ASN: rq.line.ASN,
ASName: rq.line.ASName,
Country: rq.line.Country,
+25 -13
View File
@@ -2,14 +2,18 @@ package waf
import (
"context"
"log/slog"
"net/http"
"net/netip"
"strings"
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
)
// The headers in which an answer of allow gives rproxy the client's AS number
@@ -51,7 +55,7 @@ func (rq *request) startLookUp(
return result
}
client := rq.h.clientGroup(rq.client)
client := clientGroup(rq.h.config, rq.client)
if rq.h.config.LookupSource == "file" {
result <- lookupResult{
@@ -128,22 +132,30 @@ func countryTag(country string) string {
return config.CountryTagPrefix + country
}
// addLookup adds answer, an answer about a client from the lookup
// database or GeoJS, to the client's history, and to the notes of the bans
// on its netblock that have no AS number, AS name or country yet.
func (h *handler) addLookup(answer geojs.Answer) {
h.limiter.AddLookup(answer.Client, answer.Answered,
// AddLookup adds answer, an answer about a client from the lookup database
// or GeoJS, to the client's history in limiter, and to the notes of the bans
// in ledger on its netblock that have no AS number, AS name or country yet.
// cfg sets the netblock's size.
func AddLookup(
cfg *config.WAF, limiter *ratelimit.Limiter, ledger *bans.Ledger,
answer geojs.Answer,
) {
limiter.AddLookup(answer.Client, answer.Answered,
answer.ASN, answer.ASName, answer.Country)
h.ledger.AddLookup(h.netblock(answer.Client.Addr()),
ledger.AddLookup(banNetblock(cfg, answer.Client.Addr()),
answer.ASN, answer.ASName, answer.Country)
}
// geojsFailed logs a failure of GeoJS, raises a source_failure alert for it
// and counts it. askingAgainIn is how long GeoJS is left alone after it.
func (h *handler) geojsFailed(err error, askingAgainIn time.Duration) {
h.processLog.Warn("asking GeoJS failed",
// GeoJSFailed logs a failure of GeoJS to processLog, raises a
// source_failure alert for it on alertQueue and counts it in m.
// askingAgainIn is how long GeoJS is left alone after it.
func GeoJSFailed(
processLog *slog.Logger, alertQueue *alerts.Queue, m *metrics.Metrics,
err error, askingAgainIn time.Duration,
) {
processLog.Warn("asking GeoJS failed",
"error", err.Error(), "asking_again_in", askingAgainIn.String())
h.alerts.Raise(alerts.Alert{
alertQueue.Raise(alerts.Alert{
Event: alerts.EventSourceFailure,
Reason: "asking GeoJS failed",
Detail: map[string]any{
@@ -151,7 +163,7 @@ func (h *handler) geojsFailed(err error, askingAgainIn time.Duration) {
"asking_again_in": askingAgainIn.String(),
},
})
h.metrics.GeoJSFailures.Inc()
m.GeoJSFailures.Inc()
}
// setLookupHeaders sets the headers that give the client's AS number and
+47 -118
View File
@@ -57,12 +57,28 @@ type Params struct {
RequestLog io.Writer
// ProcessLog receives the process's own messages.
ProcessLog *slog.Logger
// GeoJSURL is where clients' AS numbers and countries are looked up
// while SWW_WAF_LOOKUP_SOURCE is geojs, normally geojs.URL.
GeoJSURL string
// AbuseIPDBURL is where clients are checked with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, normally reputation.AbuseIPDBURL.
AbuseIPDBURL string
// Metrics count what waf does. Whoever builds them adds the metrics
// read from the other parts.
Metrics *metrics.Metrics
// Limiter is the table of clients the rate limits count, with each
// client's history.
Limiter *ratelimit.Limiter
// Ledger holds the bans.
Ledger *bans.Ledger
// Anomalies are the counters of the anomaly thresholds.
Anomalies *anomaly.Counters
// Lists are the lists fetched from URLs, DNSBL the DNSBL zones'
// verdicts, and AbuseIPDB AbuseIPDB's scores and the checks spent.
Lists *reputation.Lists
DNSBL *reputation.DNSBL
AbuseIPDB *reputation.AbuseIPDB
// RouteWatch asks routewatch about clients, and is nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
RouteWatch *routewatch.Client
// GeoJS looks clients' AS numbers and countries up while
// SWW_WAF_LOOKUP_SOURCE is geojs. It is given AddLookup as its Answered
// and GeoJSFailed as its Failed.
GeoJS *geojs.GeoJS
// LookupFile is the lookup database they are looked up in while
// SWW_WAF_LOOKUP_SOURCE is file, and nil otherwise.
LookupFile *lookup.File
@@ -99,11 +115,8 @@ type CoreRuleSetInspector interface {
) (coreruleset.Result, []byte, error)
}
// Server is the server waf runs, with the parts whose state the state
// files keep, the lookup database, nil unless SWW_WAF_LOOKUP_SOURCE is file, the
// lists fetched from URLs, which its Run fetches, the DNSBL zones' verdicts,
// AbuseIPDB's scores and checks spent, routewatch's answers, and the metrics.
// RouteWatch is nil while SWW_WAF_ROUTEWATCH_URL is unset.
// Server is the server waf runs, with the parts of its Params. The tests
// read them.
type Server struct {
*http.Server
@@ -119,129 +132,45 @@ type Server struct {
Metrics *metrics.Metrics
}
// newHandler returns the handler with what every request shares, as the
// settings in params make it.
// newHandler returns the handler with what every request shares, the parts
// in params among it.
func newHandler(params Params) *handler {
m := metrics.New(
params.Config.MetricsBusiestCountriesAndASNs,
params.Config.InstanceName,
)
lists, dnsbl, abuseIPDB := newReputation(params, m)
awaitingReport, err := lru.New[string, *decision](maxAwaitingReport)
if err != nil {
panic(err) // New fails only for a size below one
}
h := &handler{
return &handler{
config: params.Config,
requestLog: params.RequestLog,
processLog: params.ProcessLog,
now: params.Now,
metrics: m,
metrics: params.Metrics,
awaitingReport: awaitingReport,
limiter: ratelimit.New(ratelimit.Limits{
PerMinute: params.Config.RateLimitPerMinute,
PerHour: params.Config.RateLimitPerHour,
PerDay: params.Config.RateLimitPerDay,
BytesPerMinute: params.Config.BytesLimitPerMinute,
BytesPerHour: params.Config.BytesLimitPerHour,
BytesPerDay: params.Config.BytesLimitPerDay,
}, params.Config.MaxTrackedClients),
ledger: bans.New(bans.Params{
LimitBanDuration: params.Config.LimitBanDuration,
LimitBanRepeatWindow: params.Config.LimitBanRepeatWindow,
LimitBanPermanentAbove: params.Config.LimitBanPermanentAbove,
AttackBanDuration: params.Config.AttackBanDuration,
MaxBans: params.Config.MaxBans,
}),
anomalies: anomaly.New(anomaly.Params{
Client: params.Config.AnomalyClient,
Net: params.Config.AnomalyNet,
ASN: params.Config.AnomalyASN,
Total: params.Config.AnomalyTotal,
WatchedNet: params.Config.AnomalyWatchedNet,
NetV4Prefix: params.Config.AnomalyNetV4Prefix,
NetV6Prefix: params.Config.AnomalyNetV6Prefix,
NamedNetblocks: params.Config.AnomalyWatchedNets,
Alerts: params.Alerts,
}),
lookupFile: params.LookupFile,
lists: lists,
dnsbl: dnsbl,
abuseIPDB: abuseIPDB,
rules: params.Rules,
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
limiter: params.Limiter,
ledger: params.Ledger,
geojs: params.GeoJS,
anomalies: params.Anomalies,
lookupFile: params.LookupFile,
lists: params.Lists,
dnsbl: params.DNSBL,
abuseIPDB: params.AbuseIPDB,
routeWatch: params.RouteWatch,
rules: params.Rules,
coreRuleSet: params.CoreRuleSet,
alerts: params.Alerts,
// The country list, the headers, the tag settings that name an asn=
// or country= tag and the biased thresholds act on the answer before
// the request goes on.
waitForGeoJS: len(params.Config.ExclusivelyAllowedCountries) > 0 ||
params.Config.AddLookupHeaders ||
params.Config.TagsNeedLookup() ||
biasedThresholdsSet(params.Config),
besideLookupLimit: cmp.Or(
params.BesideLookupTimeLimit,
besideLookupTimeLimit,
),
}
if params.Config.RouteWatchURL != "" {
h.routeWatch = routewatch.New(routewatch.Params{
URL: params.Config.RouteWatchURL, Now: params.Now, ProcessLog: params.ProcessLog,
})
}
// The country list, the headers, the tag settings that name an asn= or
// country= tag and the biased thresholds act on the answer before the
// request goes on.
h.waitForGeoJS = len(params.Config.ExclusivelyAllowedCountries) > 0 ||
params.Config.AddLookupHeaders || params.Config.TagsNeedLookup() ||
biasedThresholdsSet(params.Config)
h.geojs = geojs.New(geojs.Params{
URL: params.GeoJSURL,
Answered: h.addLookup,
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: h.geojsFailed,
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddBansAndClients(h.ledger, h.limiter, params.Now)
m.AddRules(params.Rules)
return h
}
// newReputation returns the lists fetched from URLs, the DNSBL zones'
// verdicts and AbuseIPDB's scores, as the settings in params name them,
// with none fetched, asked for or checked yet, and adds their metrics to
// m, AbuseIPDB's while SWW_WAF_ABUSEIPDB_KEY is set.
func newReputation(
params Params, m *metrics.Metrics,
) (*reputation.Lists, *reputation.DNSBL, *reputation.AbuseIPDB) {
cfg := params.Config
lists := reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
dnsbl := reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones, Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: params.AbuseIPDBURL, Key: cfg.AbuseIPDBKey, MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget, CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout, Now: params.Now, ProcessLog: params.ProcessLog,
Alerts: params.Alerts,
})
m.AddReputation(lists, dnsbl)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(abuseIPDB)
}
return lists, dnsbl, abuseIPDB
}
// NewCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
+141 -15
View File
@@ -16,10 +16,17 @@ import (
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/anomaly"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
"sneak.berlin/go/smallwebwaf/internal/ratelimit"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
"sneak.berlin/go/smallwebwaf/internal/routewatch"
"sneak.berlin/go/smallwebwaf/internal/rproxy"
"sneak.berlin/go/smallwebwaf/internal/rules"
"sneak.berlin/go/smallwebwaf/internal/waf"
@@ -435,13 +442,15 @@ func newWAF(
) (*waf.Server, *output, *alerts.Queue) {
t.Helper()
return newWAFWith(t, waf.New, geojsURL, now, env)
return newWAFWith(t, waf.New, geojsURL, abuseIPDBURL, now, env)
}
// newWAFWith is newWAF for the server build makes.
// newWAFWith is newWAF for the server build makes, with clients checked with
// AbuseIPDB at abuseIPDBCheckURL.
func newWAFWith(
t *testing.T, build func(waf.Params) *waf.Server,
geojsURL string, now func() time.Time, env map[string]string,
geojsURL, abuseIPDBCheckURL string, now func() time.Time,
env map[string]string,
) (*waf.Server, *output, *alerts.Queue) {
t.Helper()
@@ -499,25 +508,142 @@ func newWAFWith(
t.Fatalf("Core Rule Set: %v", err)
}
server := build(waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
GeoJSURL: geojsURL,
AbuseIPDBURL: abuseIPDBURL,
LookupFile: lookupFile,
CoreRuleSet: coreRuleSet,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
params := waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
LookupFile: lookupFile,
CoreRuleSet: coreRuleSet,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
// The tests of the limit set it back, and hold the Core Rule Set
// with a stand-in.
BesideLookupTimeLimit: time.Hour,
})
}
addCounters(&params)
addOutsideSources(&params, geojsURL, abuseIPDBCheckURL)
server := build(params)
return server, out, alertQueue
}
// addCounters adds to params the metrics, the table of clients, the ledger
// and the anomaly counters, as sww builds them from params' settings. The
// metrics read the ledger, the table of clients and the rules.
func addCounters(params *waf.Params) {
cfg := params.Config
params.Metrics = metrics.New(
cfg.MetricsBusiestCountriesAndASNs,
cfg.InstanceName,
)
params.Limiter = ratelimit.New(ratelimit.Limits{
PerMinute: cfg.RateLimitPerMinute,
PerHour: cfg.RateLimitPerHour,
PerDay: cfg.RateLimitPerDay,
BytesPerMinute: cfg.BytesLimitPerMinute,
BytesPerHour: cfg.BytesLimitPerHour,
BytesPerDay: cfg.BytesLimitPerDay,
}, cfg.MaxTrackedClients)
params.Ledger = bans.New(bans.Params{
LimitBanDuration: cfg.LimitBanDuration,
LimitBanRepeatWindow: cfg.LimitBanRepeatWindow,
LimitBanPermanentAbove: cfg.LimitBanPermanentAbove,
AttackBanDuration: cfg.AttackBanDuration,
MaxBans: cfg.MaxBans,
})
params.Anomalies = anomaly.New(anomaly.Params{
Client: cfg.AnomalyClient,
Net: cfg.AnomalyNet,
ASN: cfg.AnomalyASN,
Total: cfg.AnomalyTotal,
WatchedNet: cfg.AnomalyWatchedNet,
NetV4Prefix: cfg.AnomalyNetV4Prefix,
NetV6Prefix: cfg.AnomalyNetV6Prefix,
NamedNetblocks: cfg.AnomalyWatchedNets,
Alerts: params.Alerts,
})
params.Metrics.AddBansAndClients(
params.Ledger,
params.Limiter,
params.Now,
)
params.Metrics.AddRules(params.Rules)
}
// addOutsideSources adds to params the lists fetched from URLs, the DNSBL
// zones' verdicts, AbuseIPDB's scores from abuseIPDBCheckURL, routewatch's
// answers while its setting is set, and GeoJS at geojsURL, as sww builds
// them from params' settings and the parts addCounters added. The metrics
// read the lists, the zones' verdicts, and AbuseIPDB's while its key is set.
func addOutsideSources(
params *waf.Params, geojsURL, abuseIPDBCheckURL string,
) {
cfg := params.Config
m, limiter, ledger := params.Metrics, params.Limiter, params.Ledger
processLog, alertQueue := params.ProcessLog, params.Alerts
params.Lists = reputation.New(reputation.Params{
BlocklistURLs: cfg.BlocklistURLs,
Refresh: cfg.BlocklistRefresh,
ASNLimitPercentURL: cfg.ASNLimitPercentURL,
TagLists: cfg.TagLists,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.DNSBL = reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
params.AbuseIPDB = reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: abuseIPDBCheckURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if cfg.RouteWatchURL != "" {
params.RouteWatch = routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: params.Now,
ProcessLog: processLog,
})
}
params.GeoJS = geojs.New(geojs.Params{
URL: geojsURL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
},
Now: params.Now,
Asked: m.GeoJSRequests.Inc,
Failed: func(err error, askingAgainIn time.Duration) {
waf.GeoJSFailed(processLog, alertQueue, m, err, askingAgainIn)
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
m.AddReputation(params.Lists, params.DNSBL)
if cfg.AbuseIPDBKey != "" {
m.AddAbuseIPDB(params.AbuseIPDB)
}
}
// newClient returns an HTTP client that sends requests as they are made,
// with no compression of its own.
func newClient(t *testing.T) *http.Client {
+6 -3
View File
@@ -38,8 +38,11 @@ func (rateLimits) check(
rq.line.BytesLimitPercent, rq.line.BytesLimitPercentSetting =
rq.bytesLimitPercent.logged()
counts, hit, over := rq.h.limiter.Count(rq.h.clientGroup(rq.client), now,
rq.rateLimitPercent.percent)
counts, hit, over := rq.h.limiter.Count(
clientGroup(rq.h.config, rq.client),
now,
rq.rateLimitPercent.percent,
)
rq.line.Counts = counts
if !over {
@@ -59,7 +62,7 @@ func (rateLimits) check(
// limit. It counts nothing.
func (rq *request) overAWholeRateLimit(now time.Time) bool {
return rq.countedByRateLimits() &&
rq.h.limiter.OverARateLimit(rq.h.clientGroup(rq.client), now)
rq.h.limiter.OverARateLimit(clientGroup(rq.h.config, rq.client), now)
}
// countedByRateLimits reports whether the rate limits count the request: its
+5 -2
View File
@@ -36,8 +36,11 @@ func (refusalLimit) check(
return nil
}
hit, over := rq.h.limiter.CountRefusal(rq.h.clientGroup(rq.client), now,
cfg.RefusalsLimitPerMinute)
hit, over := rq.h.limiter.CountRefusal(
clientGroup(rq.h.config, rq.client),
now,
cfg.RefusalsLimitPerMinute,
)
if !over {
return nil
}
+1 -1
View File
@@ -37,7 +37,7 @@ func (rq *request) noteHit(hit bans.ReputationHit, reason string) {
Event: alerts.EventReputationHit,
Host: rq.site,
Client: rq.client,
Netblock: rq.h.clientGroup(rq.client),
Netblock: clientGroup(rq.h.config, rq.client),
ASN: rq.line.ASN,
ASName: rq.line.ASName,
Country: rq.line.Country,
+5 -5
View File
@@ -122,7 +122,7 @@ func (h *handler) startRequest(
RequestID: requestID(r, isQuestion),
PeerIP: peer.String(),
ForwardedFor: strings.Join(forwardedFor, ", "),
ClientGroup: h.clientGroup(client).String(),
ClientGroup: clientGroup(h.config, client).String(),
ContentType: r.Header.Get("Content-Type"),
RequestHeaders: requestHeaders(
r,
@@ -365,7 +365,7 @@ func (rq *request) addToHistory() {
}
rq.h.limiter.AddToHistory(
rq.h.clientGroup(rq.client),
clientGroup(rq.h.config, rq.client),
rq.h.now(),
request,
)
@@ -373,7 +373,7 @@ func (rq *request) addToHistory() {
answer, found := rq.answerAtTheEnd()
if found {
rq.h.addLookup(answer)
AddLookup(rq.h.config, rq.h.limiter, rq.h.ledger, answer)
}
}
@@ -394,7 +394,7 @@ func (rq *request) countAnomalies() {
rq.h.anomalies.Count(rq.h.now(), anomaly.Request{
Host: rq.site,
Client: rq.client,
ClientGroup: rq.h.clientGroup(rq.client),
ClientGroup: clientGroup(rq.h.config, rq.client),
ASN: answer.ASN,
ASName: answer.ASName,
Country: answer.Country,
@@ -425,7 +425,7 @@ func (rq *request) answerAtTheEnd() (geojs.Answer, bool) {
return rq.lookupAnswer, true
}
return rq.h.geojs.Kept(rq.h.clientGroup(rq.client))
return rq.h.geojs.Kept(clientGroup(rq.h.config, rq.client))
}
// responseWriter is waf's answer to a request. It notes the status and
+1 -1
View File
@@ -32,7 +32,7 @@ func (routeWatchTags) check(
route, missing := rq.h.routeWatch.Route(
ctx,
rq.h.clientGroup(rq.client),
clientGroup(rq.h.config, rq.client),
rq.client,
)
if missing != "" {