Compare commits

...
Author SHA1 Message Date
sneak 69e62c3e37 rproxy: one type for the goroutines sending reports (closes #433)
check / check (push) Waiting to run
handler held a WaitGroup, a mutex and a stopped flag for the reports,
and the rule that no report starts once waiting has begun was split
between sendReport and Server.WaitForReports. reportGoroutines now
holds all three, and its two methods are the only code that touches
the lock and the flag.

Model: opus-5-5
2026-11-19 19:09:27 +00:00
clawbot aaa28f541b rproxy, sww: keep the breaker and stop tests from failing under load (closes #474)
check / check (push) Waiting to run
The circuit breaker reads the time through a clock the handler holds,
which is time.Now outside tests. The test that answers waf's
questions with answers rproxy cannot pass on stops that clock, so how
long its requests take on a slow host no longer decides whether the
breaker opens or turns the next request away.

The test that stops rproxy mid-request sets its read deadline from the
stop, not from the send, so a slow wait for the app no longer shortens
it.

Model: opus-5-5
2026-11-19 19:59:34 +01:00
clawbot 98d7432077 waf: the steps after the answer as plain statements (closes #445)
check / check (push) Waiting to run
banAndCount runs the heuristics that only ban, then countAnomalies,
then addToHistory. A refused request's decision and an allowed
request's report both call it, each with its own list. answerQuestion
keeps one defer, which writes the log line and holds the decision for
the report.

A check that panics now leaves the request out of its client's history
and the anomaly counts, as the issue states.

Model: opus-5-5
2026-11-19 19:45:13 +01:00
clawbot 11ac8aee50 config: export the setting names waf logs (closes #448)
check / check (push) Waiting to run
waf wrote eight setting names as string literals into log lines and
ban notes, and config wrote each again where it reads the setting. A
rename that missed one would log a setting that does not exist. config
now exports a constant for each name, used by its reader and by waf.

Model: opus-5-5
2026-11-19 19:29:49 +01:00
clawbot e7cc0adbdb waf: end the asks to GeoJS, the DNSBL zones, AbuseIPDB and routewatch at the stop (closes #439)
check / check (push) Waiting to run
Each of the four keeps the cancel function of every ask it started, and a
wait group of their goroutines. Its new method (GeoJS.StopAsking,
DNSBL.StopAsking, AbuseIPDB.StopChecking, routewatch Client.StopAsking)
refuses further asks, ends those under way, and returns once their
goroutines have. An ask ended that way is no failure: no alert, no failure
count, no wait before the next. Each provider in internal/sww adds the
method as a stop hook, so the last write of the state files follows it.

Model: opus-5-5
2026-11-19 19:02:12 +01:00
clawbot 805c64a256 config: give the fixed-value settings named types (closes #427)
check / check (push) Waiting to run
BytesCounted, LookupSource, BlocklistAction, DNSBLAbuseIPDBAction and
CoreRuleSetMode become named string types declared in config, with
constants for their values. Every comparison in waf and sww uses the
constants, and the private duplicates fileSource and deny go. The two
action settings share ReputationAction. The values and the strings
written to logs, metrics and alerts are unchanged.

Model: opus-5-5
2026-11-19 18:32:29 +01:00
clawbot 967ccdf75e sww: build the Core Rule Set from the settings (closes #434)
check / check (push) Waiting to run
The body of waf.NewCoreRuleSet moves into newCoreRuleSet in
internal/sww, beside the providers of the other parts; waf no longer
exports it. The waf test helper builds the Core Rule Set with
coreruleset.New while the mode is not off.

Model: opus-5-5
2026-11-19 18:15:33 +01:00
clawbot 809d2664d7 waf: ban the clients on AbuseIPDB's blacklist (closes #411)
check / check (push) Successful in 8m16s
While SWW_WAF_ABUSEIPDB_KEY is set, waf fetches AbuseIPDB's blacklist at
the start and every SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS
(60), cut at SWW_WAF_ABUSEIPDB_THRESHOLD (90, from 25 to 100). Each
listed client's netblock gets a ban of SWW_WAF_ABUSEIPDB_BAN_DAYS (30)
with the new cause abuseipdb. The blacklist itself is not kept.

These bans do not count toward SWW_WAF_MAX_BANS, so a 10,000-address
blacklist cannot push out the bans for limits and attacks. An ended
abuseipdb ban is forgotten at each fetch and each read of bans.json. A
netblock with an active ban is left alone, and so is one whose abuseipdb
ban an admin lifted, until that ban would have ended. Observe mode makes
no ban.

Model: opus-5-5
2026-11-19 12:42:41 +01:00
47 changed files with 2054 additions and 492 deletions

No files matched your search

+126 -120
View File
@@ -75,7 +75,8 @@ Together, `rproxy` and `waf` protect against:
- give the clients of chosen networks and countries a fraction of every
limit, so that they are banned sooner;
- refuse or limit clients on a blocklist, a DNS blocklist, or with a high
AbuseIPDB score.
AbuseIPDB score;
- ban the clients on AbuseIPDB's blacklist before they send a request.
For the operator, it:
@@ -294,123 +295,126 @@ account, a key, a token or an alert destination stays off until you give one.
Every setting the code reads, with its default:
| Variable | Default | What it does |
| ------------------------------------------------- | ---------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| `SWW_COMMAND` | `rproxy` | Which command the image runs, and its health check checks: `rproxy` or `waf`. |
| `SWW_RPROXY_WAF_BACKEND` | required | `waf`'s URL, such as `http://waf:8080`. |
| `SWW_RPROXY_UPSTREAM_URL` | `http://127.0.0.1:8081` | The app's URL: a scheme, a host and an optional port, nothing more. |
| `SWW_RPROXY_LISTEN_ADDR` | `:8080` | Where `rproxy` listens; leave the host part empty. |
| `SWW_RPROXY_TRUSTED_PROXIES` | `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16` | The netblocks whose `X-Forwarded-For` `rproxy` believes; set but empty, it believes none. |
| `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS` | `2000` | How long `rproxy` waits for `waf`'s answer to a question and to a report, in milliseconds. |
| `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` | `allow` | What `rproxy` does with a request when `waf` gives no answer in time, and while the circuit breaker for asks to `waf` is open: `allow` passes it to the app, `deny` answers `503`. |
| `SWW_RPROXY_MAX_REQUEST_SIZE` | `100M` | The largest request body, a size or `off`; a larger one is answered `413`. |
| `SWW_RPROXY_MAX_RESPONSE_SIZE` | `1G` | The largest response body, a size or `off`. The visitor gets `502` in place of a larger one, or it is cut off if it has already started. |
| `SWW_RPROXY_MAX_REQUEST_TIME_MS` | `60000` | Two time limits, each this long, in milliseconds or `off`: one for the visitor to send its request line and headers, then one for the whole request to reach the app. |
| `SWW_RPROXY_MAX_RESPONSE_TIME_MS` | `1800000` | How long the answer may take, from the end of the request to its last byte reaching the visitor, in milliseconds or `off`. |
| `SWW_WAF_LISTEN_ADDR` | `:8080` | Where `waf` listens; leave the host part empty. |
| `SWW_WAF_INSTANCE_NAME` | the container's host name | The name in every line `waf` logs, and in every alert and metric, such as `host1/waf`. |
| `SWW_WAF_MODE` | `enforce` | `observe` refuses nothing and makes no ban; each log line says what `enforce` would have done. |
| `SWW_WAF_IPV6_GROUP_PREFIX` | `64` | The prefix length of the IPv6 netblock that counts as one client, from 32 to 128. |
| `SWW_WAF_MAX_TRACKED_CLIENTS` | `20000` | The most clients kept, in memory and in `clients.json`; the least recently seen is dropped first. |
| `SWW_WAF_MAX_BANS` | `5000` | The most bans `waf` keeps of its own; bans an admin made do not count. |
| `SWW_WAF_ALLOW_NETS` | empty | Netblocks whose clients skip every check, such as your monitoring. |
| `SWW_WAF_RATE_LIMIT_EXEMPT_NETS` | empty | Netblocks whose clients are exempt from rate limiting and the byte limits. |
| `SWW_WAF_DENY_NETS` | empty | Netblocks whose clients are refused. |
| `SWW_WAF_RATE_LIMIT_PER_MINUTE` | `120` | The most requests a client may make in a minute, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_PER_HOUR` | `1500` | The most requests a client may make in an hour, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_PER_DAY` | `6000` | The most requests a client may make in a day, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_EXEMPT_PATHS` | empty | Path prefixes exempt from rate limiting and the byte limits, such as `/assets/`. |
| `SWW_WAF_BYTES_LIMIT_PER_MINUTE` | `off` | The most bytes counted for a client in a minute, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_LIMIT_PER_HOUR` | `50G` | The most bytes counted for a client in an hour, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_LIMIT_PER_DAY` | `100G` | The most bytes counted for a client in a day, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_COUNTED` | `both` | What the byte limits and the byte anomaly thresholds count: `response`, the app's response bodies; `request`, the visitors' request bodies; or `both`. What the visitor sent over a WebSocket counts as request bytes, and what the app sent as response bytes. |
| `SWW_WAF_REFUSALS_LIMIT_PER_MINUTE` | `30` | The most refusals a client may get in a minute from a rule file, a trap path or the Core Rule Set, a count or `off`. The next one bans the client. |
| `SWW_WAF_BAN_RESPONSE` | `403` | How a refused client is answered: `403`, `429` or `close`, which drops the connection. |
| `SWW_WAF_LIMIT_BAN_DURATION` | `1h` | The ban for a first broken limit. |
| `SWW_WAF_LIMIT_BAN_REPEAT_WINDOW` | `24h` | A client that breaks a limit again within this time after its last such ban ended gets a ban three times as long. |
| `SWW_WAF_LIMIT_BAN_PERMANENT_ABOVE` | `7d` | A ban for a broken limit that would be longer than this is permanent instead. |
| `SWW_WAF_ATTACK_BAN_DURATION` | `7d` | The ban for a first clear sign of attack: a `ban` rule or a trap path. |
| `SWW_WAF_BAN_SCOPE_V4_PREFIX` | `32` | The prefix length of the netblock a ban on an IPv4 client covers, from 0 to 32. |
| `SWW_WAF_LOOKUP_SOURCE` | `geojs` | Where each client's AS number and country come from: `geojs` (a web service), `file` (a local database) or `off`. |
| `SWW_WAF_LOOKUP_DB_PATH` | empty | The IPinfo Lite database file, in its `.mmdb` form, read while the source is `file`. |
| `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS` | `800` | How long a request waits for its client's first GeoJS answer when a setting needs it, in milliseconds. The request to GeoJS goes on, and a later answer is kept. |
| `SWW_WAF_ADD_LOOKUP_HEADERS` | `true`, or `false` while the lookup source is `off` | `true` passes the app the client's AS number and country in `X-Client-ASN` and `X-Client-Country`. |
| `SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES` | empty | When set, the only countries whose clients get through; a client the lookup cannot place is refused too. |
| `SWW_WAF_TAG_LISTS` | empty | Address lists that each add a tag to their clients' requests, as `name=URL` pairs, such as `torexit=https://example.com/tor.txt`. |
| `SWW_WAF_TAG_DENY` | empty | Tags whose requests are refused, such as `torexit,country=CN`. |
| `SWW_WAF_TAG_LIMIT_PERCENT` | empty | Tags whose clients get a percentage, from 1 to 99, of every request and byte limit, such as `vpn:50,asn=14061:25`; the lowest applies. |
| `SWW_WAF_ROUTEWATCH_URL` | unset | The URL of a routewatch instance, which gives each client's `asn=` and `prefix=` tags. Unset, nothing asks routewatch. |
| `SWW_WAF_ASN_BYTES_LIMIT_PERCENT` | empty | A percentage of the byte limits alone for the AS numbers listed, in place of their `asn=` tag's percentage. |
| `SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT` | empty | A percentage of the byte limits alone for the countries listed, in place of their `country=` tag's percentage. |
| `SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT` | `100` | The percentage of every limit a client without a country gets. |
| `SWW_WAF_ASN_LIMIT_PERCENT_URL` | unset | The URL of a text file of `AS<number>:<percent>` lines, fetched like a blocklist; each line counts as an `asn=` tag in `SWW_WAF_TAG_LIMIT_PERCENT` (the lowest wins). |
| `SWW_WAF_RULE_FILES_DIR` | `/etc/sww/rules.d` | The directory of the rule files, read at start and again when a file there changes. |
| `SWW_WAF_RULE_FILES_ENABLED` | `true` | `false` reads no rule file. |
| `SWW_WAF_TRAP_PATHS` | empty | Paths only scanners ask for, such as `/wp-login.php,/xmlrpc.php`; a request for one bans the client. |
| `SWW_WAF_CORE_RULE_SET_MODE` | `block` | What the Core Rule Set does with a match: `block` refuses it with `403`, `detect` only logs and alerts it, `off` runs no rule. |
| `SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL` | `1` | The Core Rule Set's paranoia level, from 1 to 4; each level up finds more attacks and takes more ordinary requests for attacks. |
| `SWW_WAF_CORE_RULE_SET_SCORE_THRESHOLD` | `5` | The Core Rule Set score at which a request is a match, a whole number or `off`; one critical rule scores 5. |
| `SWW_WAF_CORE_RULE_SET_DISABLED_RULES` | `920340,920420,920440,920640,930130,930140` | Core Rule Set rule ids switched off; a list you give replaces the default, so repeat these six to keep them off. |
| `SWW_WAF_CORE_RULE_SET_EXEMPT_PATHS` | empty | Path prefixes the Core Rule Set does not inspect. |
| `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` | `off` | How much of a request body the Core Rule Set reads, a size up to `8K`; `off` reads none. |
| `SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE` | unset | A file of Core Rule Set exclusions, as Coraza directives, that switch rules off for some fields or paths only. |
| `SWW_WAF_APPS` | unset | The apps each hostname serves, such as `git.example.com:gitea;blog.example.com:wordpress`; only those apps' fixes apply there. "Attack detection" lists the apps. Listing `forgejo` brings gitea's fixes too. Unset, every app's fixes apply to every hostname. |
| `SWW_WAF_BLOCKLIST_URLS` | empty | Blocklists to fetch, text files of addresses and netblocks one to a line, such as `https://www.spamhaus.org/drop/drop.txt`. |
| `SWW_WAF_BLOCKLIST_REFRESH` | `24h` | How long after a list was last tried it is fetched again, `1h` or more. |
| `SWW_WAF_BLOCKLIST_ACTION` | `deny` | What a client on a blocklist gets: `deny`, `limit:<percent>` of every limit, or `log`. |
| `SWW_WAF_DNSBL_ZONES` | empty | DNS blocklists asked about each new client in the background, such as `dnsbl.dronebl.org`. |
| `SWW_WAF_DNSBL_RESOLVER` | unset | The resolver the zones are asked through, an IP address with an optional port; unset, the host's resolver is used. |
| `SWW_WAF_ABUSEIPDB_KEY` | unset | The key of your AbuseIPDB account; set, a client that has committed an offence is checked in the background. |
| `SWW_WAF_ABUSEIPDB_MIN_SCORE` | `75` | The least AbuseIPDB abuse confidence score, from 0 to 100, that is a hit. |
| `SWW_WAF_ABUSEIPDB_DAILY_BUDGET` | `900` | The most AbuseIPDB checks made in a day. |
| `SWW_WAF_DNSBL_ABUSEIPDB_ACTION` | `limit:25` | What a client listed by a DNS blocklist, or scored a hit by AbuseIPDB, gets: `deny`, `limit:<percent>` or `log`. |
| `SWW_WAF_IP_REPUTATION_CACHE_TTL` | `24h` | How long a DNS blocklist verdict or an AbuseIPDB score is used. |
| `SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS` | `2000` | How long a DNS blocklist query or an AbuseIPDB check may take, in milliseconds. |
| `SWW_WAF_STATE_DIR` | `/var/lib/sww` | The directory of the state files, an absolute path. |
| `SWW_WAF_BANS_WRITE_DELAY` | `10s` | How long `bans.json` waits to be written after a ban is made, lifted or made permanent. |
| `SWW_WAF_STATE_WRITE_INTERVAL` | `15m` | How often every state and cache file is written. |
| `SWW_WAF_CACHE_DIR` | `/var/cache/sww` | The directory of the cache files, an absolute path. |
| `SWW_WAF_LOG_LEVEL` | `info` | The least severe of `waf`'s own messages that are written: `debug`, `info`, `warn` or `error`; request lines are always written. |
| `SWW_WAF_LOG_REQUEST_HEADERS` | `accept,accept-language,accept-encoding,content-type,origin,range` | The request headers whose values the request log records; `Authorization` and `Cookie` are never recorded. |
| `SWW_WAF_LOG_REMOTE_URL` | unset | A syslog server that also gets every line `waf` writes: `syslog+udp://`, `syslog+tcp://` or `syslog+tls://` with a host and a port. |
| `SWW_WAF_LOG_REMOTE_TLS_CA_FILE` | unset | A file of PEM certificates a `syslog+tls` server's certificate must chain to, instead of the host's own. |
| `SWW_WAF_LOG_REMOTE_BUFFER_LINES` | `10000` | The most lines held while they wait to be sent; past it, the oldest is dropped. |
| `SWW_WAF_LOG_REMOTE_FACILITY` | `local0` | The syslog facility of each record sent. |
| `SWW_WAF_LOG_REMOTE_APP_NAME` | `SWW_WAF_INSTANCE_NAME` | The app name in each syslog record, 1 to 48 printable ASCII characters without a space. |
| `SWW_WAF_ADMIN_TOKEN` | unset | The bearer token for the ban and client endpoints, at least 32 characters; unset, they answer `404`. |
| `SWW_WAF_METRICS_TOKEN` | unset | The bearer token for `/_sww/metrics`, at least 32 characters; unset, the metrics are off. |
| `SWW_WAF_METRICS_BUSIEST_COUNTRIES_AND_ASNS` | `50` | How many AS numbers and how many countries get metric series of their own; the rest are summed as `other`. |
| `SWW_WAF_ALERT_WEBHOOK_URL` | unset | A webhook each alert is posted to as a JSON object. |
| `SWW_WAF_ALERT_WEBHOOK_HEADERS` | empty | Headers sent with each post, a list of `Name:value`, such as `Authorization:Bearer <token>`. |
| `SWW_WAF_ALERT_SLACK_WEBHOOK_URL` | unset | A Slack incoming webhook each alert is posted to as a message. |
| `SWW_WAF_ALERT_NTFY_URL` | unset | An ntfy topic each alert is published to, as its full URL, such as `https://ntfy.sh/my-alerts`. |
| `SWW_WAF_ALERT_NTFY_TOKEN` | unset | An ntfy access token sent with each alert. |
| `SWW_WAF_ALERT_EVENTS` | `ban,permanent_ban,core_rule_set_match,anomaly,reputation_hit,source_failure,file_error` | The events alerts are sent for; the hourly `summary` is sent whatever it says. |
| `SWW_WAF_ALERT_COOLDOWN` | `15m` | How long after an alert its repeats are held back and counted, a duration or `off`. |
| `SWW_WAF_ALERT_MAX_PER_HOUR` | `60` | The most alerts sent in an hour, a number or `off`; the rest are counted in the hour's `summary`. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| Variable | Default | What it does |
| --------------------------------------------------- | ---------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| `SWW_COMMAND` | `rproxy` | Which command the image runs, and its health check checks: `rproxy` or `waf`. |
| `SWW_RPROXY_WAF_BACKEND` | required | `waf`'s URL, such as `http://waf:8080`. |
| `SWW_RPROXY_UPSTREAM_URL` | `http://127.0.0.1:8081` | The app's URL: a scheme, a host and an optional port, nothing more. |
| `SWW_RPROXY_LISTEN_ADDR` | `:8080` | Where `rproxy` listens; leave the host part empty. |
| `SWW_RPROXY_TRUSTED_PROXIES` | `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16` | The netblocks whose `X-Forwarded-For` `rproxy` believes; set but empty, it believes none. |
| `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS` | `2000` | How long `rproxy` waits for `waf`'s answer to a question and to a report, in milliseconds. |
| `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` | `allow` | What `rproxy` does with a request when `waf` gives no answer in time, and while the circuit breaker for asks to `waf` is open: `allow` passes it to the app, `deny` answers `503`. |
| `SWW_RPROXY_MAX_REQUEST_SIZE` | `100M` | The largest request body, a size or `off`; a larger one is answered `413`. |
| `SWW_RPROXY_MAX_RESPONSE_SIZE` | `1G` | The largest response body, a size or `off`. The visitor gets `502` in place of a larger one, or it is cut off if it has already started. |
| `SWW_RPROXY_MAX_REQUEST_TIME_MS` | `60000` | Two time limits, each this long, in milliseconds or `off`: one for the visitor to send its request line and headers, then one for the whole request to reach the app. |
| `SWW_RPROXY_MAX_RESPONSE_TIME_MS` | `1800000` | How long the answer may take, from the end of the request to its last byte reaching the visitor, in milliseconds or `off`. |
| `SWW_WAF_LISTEN_ADDR` | `:8080` | Where `waf` listens; leave the host part empty. |
| `SWW_WAF_INSTANCE_NAME` | the container's host name | The name in every line `waf` logs, and in every alert and metric, such as `host1/waf`. |
| `SWW_WAF_MODE` | `enforce` | `observe` refuses nothing and makes no ban; each log line says what `enforce` would have done. |
| `SWW_WAF_IPV6_GROUP_PREFIX` | `64` | The prefix length of the IPv6 netblock that counts as one client, from 32 to 128. |
| `SWW_WAF_MAX_TRACKED_CLIENTS` | `20000` | The most clients kept, in memory and in `clients.json`; the least recently seen is dropped first. |
| `SWW_WAF_MAX_BANS` | `5000` | The most bans `waf` keeps for broken limits and attacks; bans an admin made and bans for AbuseIPDB's blacklist do not count. |
| `SWW_WAF_ALLOW_NETS` | empty | Netblocks whose clients skip every check, such as your monitoring. |
| `SWW_WAF_RATE_LIMIT_EXEMPT_NETS` | empty | Netblocks whose clients are exempt from rate limiting and the byte limits. |
| `SWW_WAF_DENY_NETS` | empty | Netblocks whose clients are refused. |
| `SWW_WAF_RATE_LIMIT_PER_MINUTE` | `120` | The most requests a client may make in a minute, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_PER_HOUR` | `1500` | The most requests a client may make in an hour, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_PER_DAY` | `6000` | The most requests a client may make in a day, a count or `off`; the next request is refused and bans the client. |
| `SWW_WAF_RATE_LIMIT_EXEMPT_PATHS` | empty | Path prefixes exempt from rate limiting and the byte limits, such as `/assets/`. |
| `SWW_WAF_BYTES_LIMIT_PER_MINUTE` | `off` | The most bytes counted for a client in a minute, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_LIMIT_PER_HOUR` | `50G` | The most bytes counted for a client in an hour, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_LIMIT_PER_DAY` | `100G` | The most bytes counted for a client in a day, a size or `off`. `SWW_WAF_BYTES_COUNTED` says which bytes count: response bodies, request bodies or both. The request that passes the limit is not cut off, and the client is banned when its response ends. |
| `SWW_WAF_BYTES_COUNTED` | `both` | What the byte limits and the byte anomaly thresholds count: `response`, the app's response bodies; `request`, the visitors' request bodies; or `both`. What the visitor sent over a WebSocket counts as request bytes, and what the app sent as response bytes. |
| `SWW_WAF_REFUSALS_LIMIT_PER_MINUTE` | `30` | The most refusals a client may get in a minute from a rule file, a trap path or the Core Rule Set, a count or `off`. The next one bans the client. |
| `SWW_WAF_BAN_RESPONSE` | `403` | How a refused client is answered: `403`, `429` or `close`, which drops the connection. |
| `SWW_WAF_LIMIT_BAN_DURATION` | `1h` | The ban for a first broken limit. |
| `SWW_WAF_LIMIT_BAN_REPEAT_WINDOW` | `24h` | A client that breaks a limit again within this time after its last such ban ended gets a ban three times as long. |
| `SWW_WAF_LIMIT_BAN_PERMANENT_ABOVE` | `7d` | A ban for a broken limit that would be longer than this is permanent instead. |
| `SWW_WAF_ATTACK_BAN_DURATION` | `7d` | The ban for a first clear sign of attack: a `ban` rule or a trap path. |
| `SWW_WAF_BAN_SCOPE_V4_PREFIX` | `32` | The prefix length of the netblock a ban on an IPv4 client covers, from 0 to 32. |
| `SWW_WAF_LOOKUP_SOURCE` | `geojs` | Where each client's AS number and country come from: `geojs` (a web service), `file` (a local database) or `off`. |
| `SWW_WAF_LOOKUP_DB_PATH` | empty | The IPinfo Lite database file, in its `.mmdb` form, read while the source is `file`. |
| `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS` | `800` | How long a request waits for its client's first GeoJS answer when a setting needs it, in milliseconds. The request to GeoJS goes on, and a later answer is kept. |
| `SWW_WAF_ADD_LOOKUP_HEADERS` | `true`, or `false` while the lookup source is `off` | `true` passes the app the client's AS number and country in `X-Client-ASN` and `X-Client-Country`. |
| `SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES` | empty | When set, the only countries whose clients get through; a client the lookup cannot place is refused too. |
| `SWW_WAF_TAG_LISTS` | empty | Address lists that each add a tag to their clients' requests, as `name=URL` pairs, such as `torexit=https://example.com/tor.txt`. |
| `SWW_WAF_TAG_DENY` | empty | Tags whose requests are refused, such as `torexit,country=CN`. |
| `SWW_WAF_TAG_LIMIT_PERCENT` | empty | Tags whose clients get a percentage, from 1 to 99, of every request and byte limit, such as `vpn:50,asn=14061:25`; the lowest applies. |
| `SWW_WAF_ROUTEWATCH_URL` | unset | The URL of a routewatch instance, which gives each client's `asn=` and `prefix=` tags. Unset, nothing asks routewatch. |
| `SWW_WAF_ASN_BYTES_LIMIT_PERCENT` | empty | A percentage of the byte limits alone for the AS numbers listed, in place of their `asn=` tag's percentage. |
| `SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT` | empty | A percentage of the byte limits alone for the countries listed, in place of their `country=` tag's percentage. |
| `SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT` | `100` | The percentage of every limit a client without a country gets. |
| `SWW_WAF_ASN_LIMIT_PERCENT_URL` | unset | The URL of a text file of `AS<number>:<percent>` lines, fetched like a blocklist; each line counts as an `asn=` tag in `SWW_WAF_TAG_LIMIT_PERCENT` (the lowest wins). |
| `SWW_WAF_RULE_FILES_DIR` | `/etc/sww/rules.d` | The directory of the rule files, read at start and again when a file there changes. |
| `SWW_WAF_RULE_FILES_ENABLED` | `true` | `false` reads no rule file. |
| `SWW_WAF_TRAP_PATHS` | empty | Paths only scanners ask for, such as `/wp-login.php,/xmlrpc.php`; a request for one bans the client. |
| `SWW_WAF_CORE_RULE_SET_MODE` | `block` | What the Core Rule Set does with a match: `block` refuses it with `403`, `detect` only logs and alerts it, `off` runs no rule. |
| `SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL` | `1` | The Core Rule Set's paranoia level, from 1 to 4; each level up finds more attacks and takes more ordinary requests for attacks. |
| `SWW_WAF_CORE_RULE_SET_SCORE_THRESHOLD` | `5` | The Core Rule Set score at which a request is a match, a whole number or `off`; one critical rule scores 5. |
| `SWW_WAF_CORE_RULE_SET_DISABLED_RULES` | `920340,920420,920440,920640,930130,930140` | Core Rule Set rule ids switched off; a list you give replaces the default, so repeat these six to keep them off. |
| `SWW_WAF_CORE_RULE_SET_EXEMPT_PATHS` | empty | Path prefixes the Core Rule Set does not inspect. |
| `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` | `off` | How much of a request body the Core Rule Set reads, a size up to `8K`; `off` reads none. |
| `SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE` | unset | A file of Core Rule Set exclusions, as Coraza directives, that switch rules off for some fields or paths only. |
| `SWW_WAF_APPS` | unset | The apps each hostname serves, such as `git.example.com:gitea;blog.example.com:wordpress`; only those apps' fixes apply there. "Attack detection" lists the apps. Listing `forgejo` brings gitea's fixes too. Unset, every app's fixes apply to every hostname. |
| `SWW_WAF_BLOCKLIST_URLS` | empty | Blocklists to fetch, text files of addresses and netblocks one to a line, such as `https://www.spamhaus.org/drop/drop.txt`. |
| `SWW_WAF_BLOCKLIST_REFRESH` | `24h` | How long after a list was last tried it is fetched again, `1h` or more. |
| `SWW_WAF_BLOCKLIST_ACTION` | `deny` | What a client on a blocklist gets: `deny`, `limit:<percent>` of every limit, or `log`. |
| `SWW_WAF_DNSBL_ZONES` | empty | DNS blocklists asked about each new client in the background, such as `dnsbl.dronebl.org`. |
| `SWW_WAF_DNSBL_RESOLVER` | unset | The resolver the zones are asked through, an IP address with an optional port; unset, the host's resolver is used. |
| `SWW_WAF_ABUSEIPDB_KEY` | unset | The key of your AbuseIPDB account. Set, a client that has committed an offence is checked in the background, and the clients on AbuseIPDB's blacklist are banned. |
| `SWW_WAF_ABUSEIPDB_MIN_SCORE` | `75` | The least AbuseIPDB abuse confidence score, from 0 to 100, that is a hit. |
| `SWW_WAF_ABUSEIPDB_DAILY_BUDGET` | `900` | The most AbuseIPDB checks made in a day. |
| `SWW_WAF_DNSBL_ABUSEIPDB_ACTION` | `limit:25` | What a client listed by a DNS blocklist, or scored a hit by AbuseIPDB, gets: `deny`, `limit:<percent>` or `log`. |
| `SWW_WAF_IP_REPUTATION_CACHE_TTL` | `24h` | How long a DNS blocklist verdict or an AbuseIPDB score is used. |
| `SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS` | `2000` | How long a DNS blocklist query or an AbuseIPDB check may take, in milliseconds. |
| `SWW_WAF_ABUSEIPDB_THRESHOLD` | `90` | The least AbuseIPDB score, from 25 to 100, at which a client on its blacklist is banned. Do not set it below 50 to 75: lower scores list ordinary visitors. |
| `SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS` | `60` | How often AbuseIPDB's blacklist is fetched again, in minutes. |
| `SWW_WAF_ABUSEIPDB_BAN_DAYS` | `30` | How long a client on AbuseIPDB's blacklist is banned, in days. |
| `SWW_WAF_STATE_DIR` | `/var/lib/sww` | The directory of the state files, an absolute path. |
| `SWW_WAF_BANS_WRITE_DELAY` | `10s` | How long `bans.json` waits to be written after a ban is made, lifted or made permanent. |
| `SWW_WAF_STATE_WRITE_INTERVAL` | `15m` | How often every state and cache file is written. |
| `SWW_WAF_CACHE_DIR` | `/var/cache/sww` | The directory of the cache files, an absolute path. |
| `SWW_WAF_LOG_LEVEL` | `info` | The least severe of `waf`'s own messages that are written: `debug`, `info`, `warn` or `error`; request lines are always written. |
| `SWW_WAF_LOG_REQUEST_HEADERS` | `accept,accept-language,accept-encoding,content-type,origin,range` | The request headers whose values the request log records; `Authorization` and `Cookie` are never recorded. |
| `SWW_WAF_LOG_REMOTE_URL` | unset | A syslog server that also gets every line `waf` writes: `syslog+udp://`, `syslog+tcp://` or `syslog+tls://` with a host and a port. |
| `SWW_WAF_LOG_REMOTE_TLS_CA_FILE` | unset | A file of PEM certificates a `syslog+tls` server's certificate must chain to, instead of the host's own. |
| `SWW_WAF_LOG_REMOTE_BUFFER_LINES` | `10000` | The most lines held while they wait to be sent; past it, the oldest is dropped. |
| `SWW_WAF_LOG_REMOTE_FACILITY` | `local0` | The syslog facility of each record sent. |
| `SWW_WAF_LOG_REMOTE_APP_NAME` | `SWW_WAF_INSTANCE_NAME` | The app name in each syslog record, 1 to 48 printable ASCII characters without a space. |
| `SWW_WAF_ADMIN_TOKEN` | unset | The bearer token for the ban and client endpoints, at least 32 characters; unset, they answer `404`. |
| `SWW_WAF_METRICS_TOKEN` | unset | The bearer token for `/_sww/metrics`, at least 32 characters; unset, the metrics are off. |
| `SWW_WAF_METRICS_BUSIEST_COUNTRIES_AND_ASNS` | `50` | How many AS numbers and how many countries get metric series of their own; the rest are summed as `other`. |
| `SWW_WAF_ALERT_WEBHOOK_URL` | unset | A webhook each alert is posted to as a JSON object. |
| `SWW_WAF_ALERT_WEBHOOK_HEADERS` | empty | Headers sent with each post, a list of `Name:value`, such as `Authorization:Bearer <token>`. |
| `SWW_WAF_ALERT_SLACK_WEBHOOK_URL` | unset | A Slack incoming webhook each alert is posted to as a message. |
| `SWW_WAF_ALERT_NTFY_URL` | unset | An ntfy topic each alert is published to, as its full URL, such as `https://ntfy.sh/my-alerts`. |
| `SWW_WAF_ALERT_NTFY_TOKEN` | unset | An ntfy access token sent with each alert. |
| `SWW_WAF_ALERT_EVENTS` | `ban,permanent_ban,core_rule_set_match,anomaly,reputation_hit,source_failure,file_error` | The events alerts are sent for; the hourly `summary` is sent whatever it says. |
| `SWW_WAF_ALERT_COOLDOWN` | `15m` | How long after an alert its repeats are held back and counted, a duration or `off`. |
| `SWW_WAF_ALERT_MAX_PER_HOUR` | `60` | The most alerts sent in an hour, a number or `off`; the rest are counted in the hour's `summary`. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_CLIENT_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the netblock around a client makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the netblock around a client in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_NET_V4_PREFIX` | `24` | The prefix length of the netblock around an IPv4 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 32. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_NET_V6_PREFIX` | `48` | The prefix length of the netblock around an IPv6 client that the `SWW_WAF_ANOMALY_NET_` thresholds count, from 0 to 128. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when one AS number makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_ASN_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for one AS number in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when the whole service gets more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_TOTAL_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for the whole service in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NETS` | empty | Named netblocks the `SWW_WAF_ANOMALY_WATCHED_NET_` thresholds count each as a whole, such as `office=203.0.113.0/24,scraper-x=198.51.100.0/22`. Those thresholds only send alerts. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_MINUTE` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in a minute, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_REQUESTS_PER_HOUR` | `off` | Sends one alert to the alert destinations when a watched netblock makes more requests than this in an hour, a count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_MINUTE` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in a minute, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
| `SWW_WAF_ANOMALY_WATCHED_NET_BYTES_PER_HOUR` | `off` | Sends one alert to the alert destinations when more bytes than this are counted for a watched netblock in an hour, a size. `SWW_WAF_BYTES_COUNTED` says which bytes count. No client is banned, rate limited or blocked. |
[`docs/settings.md`](docs/settings.md) gives the values each setting takes in
full, and the limits that are fixed rather than settings.
@@ -766,8 +770,10 @@ status for a size or time limit, such as `413` for a body too large.
- A client is one IPv4 address or one IPv6 netblock of
`SWW_WAF_IPV6_GROUP_PREFIX`, since one abuser usually controls a whole /64.
- Each limit is counted over a sliding window with a few integers per client.
The table of clients and the table of bans each have a bound
(`SWW_WAF_MAX_TRACKED_CLIENTS`, `SWW_WAF_MAX_BANS`), so memory is bounded too.
The table of clients and the bans for limits and attacks each have a bound
(`SWW_WAF_MAX_TRACKED_CLIENTS`, `SWW_WAF_MAX_BANS`). The bans for AbuseIPDB's
blacklist are bounded by the clients it listed over the last
`SWW_WAF_ABUSEIPDB_BAN_DAYS` days. So memory is bounded too.
- A ban refuses every request from its netblock until it ends. Requests refused
under a ban count toward no limit. A permanent ban ends only when an admin
lifts it.
+45 -17
View File
@@ -94,7 +94,8 @@ never as a time.
to count and report failures.
- `internal/lookup`: looks clients up in the lookup database.
- `internal/reputation`: fetches the lists, asks the DNS blocklists and
AbuseIPDB in the background, and keeps their answers.
AbuseIPDB in the background, and keeps their answers. It also fetches
AbuseIPDB's blacklist, which `internal/waf` bans.
- `internal/routewatch`: asks a routewatch instance about clients in the
background, and keeps its answers.
- `internal/anomaly`: the anomaly counters and their alerts.
@@ -240,13 +241,15 @@ apply.
load.
- Memory is bounded. When the table of clients holds
`SWW_WAF_MAX_TRACKED_CLIENTS`, the least recently seen client is dropped
first, with its history. The bans are bounded by `SWW_WAF_MAX_BANS` (see
"Bans"). The GeoJS answers, the reputation verdicts and scores, the DNS
queries under way and the anomaly counters have fixed bounds, listed under
"Fixed limits" in `docs/settings.md`. Past its bound, the GeoJS answer or
anomaly counter used longest ago goes first, and the verdict or score fetched
longest ago. Past the bound on DNS queries under way, a zone is asked at the
client's next request.
first, with its history. The bans for broken limits and clear signs of attack
are bounded by `SWW_WAF_MAX_BANS` (see "Bans"). Those for AbuseIPDB's
blacklist are bounded by the clients it listed over the last
`SWW_WAF_ABUSEIPDB_BAN_DAYS` days (see "Reputation"). The GeoJS answers, the
reputation verdicts and scores, the DNS queries under way and the anomaly
counters have fixed bounds, listed under "Fixed limits" in `docs/settings.md`.
Past its bound, the GeoJS answer or anomaly counter used longest ago goes
first, and the verdict or score fetched longest ago. Past the bound on DNS
queries under way, a zone is asked at the client's next request.
## Bans
@@ -301,6 +304,9 @@ to a ban, each by its own rule:
Once it ends, only new requests can break a limit again. The client's
history keeps its totals.
A client on AbuseIPDB's blacklist is banned before it sends a request, with the
cause `abuseipdb` (see "Reputation").
A Core Rule Set match refuses only the request it matched, with `403` and
without a ban, because the Core Rule Set has false positives. A `block` rule
does the same. Those refusals count toward the refusal limit, so a client that
@@ -327,11 +333,12 @@ does not count toward a longer ban; it refuses nothing. Deleting its entry from
A permanent ban does not run out. It ends when an admin lifts it, or when `waf`
drops it from a full table, as below. When `waf` holds `SWW_WAF_MAX_BANS` bans
of its own, it drops the earliest ban of one netblock: the netblock that has
gone longest without a request. A past, active or permanent ban is dropped
alike. A scanner whose ban was dropped that way is refused and banned again by
its next probe. A ban whose cause is `admin` is never dropped and does not count
toward `SWW_WAF_MAX_BANS`, so such bans can never fill the table.
for broken limits and clear signs of attack, it drops the earliest such ban of
one netblock: the netblock that has gone longest without a request. A past,
active or permanent ban is dropped alike. A scanner whose ban was dropped that
way is refused and banned again by its next probe. Bans whose cause is `admin`
or `abuseipdb` do not count toward `SWW_WAF_MAX_BANS` and are never dropped to
make room, so they can never push out the others.
A request refused under a ban that runs out is logged with the action
`temporarily_banned`. Under a permanent ban the action is `permanently_banned`.
@@ -2038,6 +2045,26 @@ host, sharing one address, would often fetch too close together.
- AbuseIPDB answers other than `200`;
- the answer gives no score;
- no answer comes within `SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS`.
- While `SWW_WAF_ABUSEIPDB_KEY` is set, AbuseIPDB's blacklist is fetched at the
start and every `SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS` minutes
(default `60`). It lists the clients AbuseIPDB scores at
`SWW_WAF_ABUSEIPDB_THRESHOLD` (default `90`) or more. The blacklist itself is
not kept.
- Each client on it is banned for `SWW_WAF_ABUSEIPDB_BAN_DAYS` days (default
`30`), with the cause `abuseipdb`. The ban covers the client's netblock,
as any ban does.
- A netblock that already has an active ban is left as it is. So is one
whose `abuseipdb` ban an admin lifted, until that ban would have ended.
- An `abuseipdb` ban that has ended is forgotten at the next of these:
- a fetch of the blacklist in `enforce` mode;
- a read of `bans.json`, at the start or after an admin's edit.
- In `observe` mode the blacklist makes no ban.
- The threshold takes 25 to 100. It should not be set below 50 to 75, since
lower scores list ordinary visitors. AbuseIPDB serves free accounts the
blacklist at the threshold 100, whatever is asked for.
- AbuseIPDB limits the fetches of the blacklist a day: 5 for a free account.
A fetch over the limit fails, and is logged and alerted. The default
refresh fetches it 24 times a day.
- `SWW_WAF_DNSBL_ABUSEIPDB_ACTION`, for DNS blocklist and AbuseIPDB hits, is
`limit:25` by default. Such verdicts are less certain than a blocklist, so a
listed client gets a quarter of every request and byte limit rather than a
@@ -2052,9 +2079,10 @@ host, sharing one address, would often fetch too close together.
- Alerts go to a webhook as JSON, and to Slack and ntfy as formatted messages.
`docs/alerts.md` lists the events, the JSON object and the messages.
`SWW_WAF_ALERT_EVENTS` chooses which of the seven event types are sent; the
hourly `summary` is sent whatever it says. The bans an admin makes raise no
alert. In `observe` mode, a request that would have made a ban still raises
the ban's alert, with `mode` set to `observe` in its `detail`.
hourly `summary` is sent whatever it says. The bans an admin makes, and the
bans for AbuseIPDB's blacklist, raise no alert. In `observe` mode, a request
that would have made a ban still raises the ban's alert, with `mode` set to
`observe` in its `detail`.
- A repeat is an alert with the same event, and the same netblock, source, file
or anomaly scope, as one sent less than `SWW_WAF_ALERT_COOLDOWN` before. An
anomaly scope is one of the things counted under "Anomaly thresholds". A
@@ -2202,7 +2230,7 @@ lists the files, what each holds, and their sizes.
these stop the process with a message naming the file and position:
- a file that does not parse, or has an unknown `version`;
- an entry without a field it needs;
- a ban whose cause is not one of the four;
- a ban whose cause is not `limit`, `attack`, `admin` or `abuseipdb`;
- a ban whose `expires` is not after its `start`.
Starting with empty state would silently forgive every repeat offender.
+3 -2
View File
@@ -6,7 +6,7 @@ back or dropped.
## Events
- `ban`: a ban `waf` made.
- `ban`: a ban `waf` made for a broken limit or a clear sign of attack.
- `permanent_ban`: a permanent ban it made, or an existing ban made permanent by
a request.
- `core_rule_set_match`: the Core Rule Set scored a request at or over the
@@ -68,7 +68,8 @@ on one line:
"earlier_bans": {
"limit": 0,
"attack": 0,
"admin": 0
"admin": 0,
"abuseipdb": 0
}
}
},
+9 -2
View File
@@ -42,8 +42,8 @@ chooses between the two (see "The image's command" below).
client's group, from 32 to 128.
- `SWW_WAF_MAX_TRACKED_CLIENTS` (default `20000`): the most clients kept, a
whole number above zero.
- `SWW_WAF_MAX_BANS` (default `5000`): how many of its own bans `waf` keeps, a
whole number above zero.
- `SWW_WAF_MAX_BANS` (default `5000`): the most bans `waf` keeps for broken
limits and attacks, a whole number above zero.
## Tokens
@@ -338,6 +338,13 @@ tag that no request can get stops the start. A request can get only these:
or AbuseIPDB's score is used. A duration.
- `SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS` (default `2000`): how long a query to a
zone or a check with AbuseIPDB may take. A time in milliseconds.
- `SWW_WAF_ABUSEIPDB_THRESHOLD` (default `90`): the least abuse confidence score
of the clients on AbuseIPDB's blacklist, a whole number from 25 to 100. It
should not be set below 50 to 75, since lower scores list ordinary visitors.
- `SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS` (default `60`): how often
the blacklist is fetched again, in minutes. A whole number above zero.
- `SWW_WAF_ABUSEIPDB_BAN_DAYS` (default `30`): how long the ban of a client on
the blacklist lasts, in days. A whole number above zero.
## Alerting
+19 -5
View File
@@ -21,11 +21,22 @@ top-level `version` of 1.
## `bans.json`
Active and past bans: every ban an admin made, and up to `SWW_WAF_MAX_BANS` of
those `waf` made. Per entry:
Active and past bans:
- every ban an admin made;
- up to `SWW_WAF_MAX_BANS` of those `waf` made for a broken limit or an attack;
- the bans for AbuseIPDB's blacklist.
A ban for AbuseIPDB's blacklist that has ended is forgotten at the next of
these:
- a fetch of the blacklist in `enforce` mode;
- a read of `bans.json`, at the start or after an admin's edit.
Per entry:
- `netblock`, `start` and `expires` (`null` for a permanent ban);
- `cause`: `attack`, `limit` or `admin`;
- `cause`: `attack`, `limit`, `admin` or `abuseipdb`;
- `reason`: a short reason;
- `lifted`: when an admin lifted it, if one did;
- `notes`: the notes below.
@@ -60,7 +71,8 @@ ban. The notes:
- for a clear sign of attack, `rule_id` and `target`, or `trap_path`;
- `reputation`: the sources the client was on, each with its `source` and, for
AbuseIPDB, its `score`;
- `request`: the request that caused the ban, each text cut to 256 bytes:
- `request`: the request that caused the ban, each text cut to 256 bytes, and
empty for a ban for AbuseIPDB's blacklist:
- `time`, `method` and `host`;
- `path`, with its query string;
- `status` and `user_agent`;
@@ -151,7 +163,9 @@ A cache file. routewatch's answers from the last hour, one per line:
- `bans.json`: about 1.2 KiB per ban, at most about 2.5 KiB, so about 6 MiB at
the default `SWW_WAF_MAX_BANS`. Written every 15 minutes, a full file comes to
about 600 MiB of writes a day, and a hundred new bans a day add about 600 MiB
more.
more. A ban for AbuseIPDB's blacklist takes about 1 KiB. A free account's
blacklist lists 10,000 clients, so it adds at least 10 MiB, and 1 GiB of
writes a day.
- `lookups.json`: about 150 bytes per answer, under 1.5 GiB of writes a day when
full.
- `routewatch.json`: about 120 bytes per answer, at most about 12 MiB.
+165
View File
@@ -0,0 +1,165 @@
package bans_test
import (
"net/netip"
"testing"
"time"
"sneak.berlin/go/smallwebwaf/internal/bans"
)
func TestBlacklistedNetblockIsBannedUntilTheGivenEnd(t *testing.T) {
t.Parallel()
ledger := bans.New(defaultParams())
netblock := netip.MustParsePrefix("203.0.113.9/32")
now := midnight()
expires := now.Add(30 * day)
made := ledger.BanForAbuseIPDB(
now, expires, map[netip.Prefix]int64{netblock: 95},
)
if made != 1 || ledger.Made(bans.CauseAbuseIPDB) != 1 {
t.Fatalf("made %d bans, %d counted, want 1 and 1",
made, ledger.Made(bans.CauseAbuseIPDB))
}
ban, banned, madePermanent := ledger.Check(netblock.Addr(), now)
if !banned || madePermanent || !ban.Expires.Equal(expires) ||
ban.Cause != bans.CauseAbuseIPDB ||
ban.Reason != "on AbuseIPDB's blacklist with a score of 95" ||
len(ban.Notes.Reputation) != 1 ||
ban.Notes.Reputation[0].Source != "abuseipdb" ||
*ban.Notes.Reputation[0].Score != 95 {
t.Errorf(
"ban %+v, banned %t, made permanent %t, want the blacklist's "+
"ban until %s",
ban,
banned,
madePermanent,
expires,
)
}
if _, banned, _ := ledger.Check(netblock.Addr(), expires); banned {
t.Error("the ban refuses a request at its end")
}
}
func TestBlacklistLeavesANetblockWithAnActiveBanAsItIs(t *testing.T) {
t.Parallel()
ledger := bans.New(defaultParams())
netblock := netip.MustParsePrefix("203.0.113.9/32")
now := midnight()
scores := map[netip.Prefix]int64{netblock: 100}
limitBan, _ := ledger.BanForLimit(netblock, now, bans.Notes{})
if made := ledger.BanForAbuseIPDB(now, now.Add(30*day), scores); made != 0 {
t.Errorf("made %d bans over a ban for a limit, want none", made)
}
// Once that ban has ended the netblock is banned, and the blacklist
// fetched again makes no second ban while the first lasts.
later := limitBan.Expires
if made := ledger.BanForAbuseIPDB(later, later.Add(30*day), scores); made != 1 {
t.Errorf("made %d bans after the ban for a limit, want 1", made)
}
later = later.Add(time.Hour)
if made := ledger.BanForAbuseIPDB(later, later.Add(30*day), scores); made != 0 {
t.Errorf("made %d bans while the blacklist's lasts, want none", made)
}
wantBans(t, ledger, map[netip.Prefix]int{netblock: 2})
if got := ledger.Bans(netblock)[1].Notes.EarlierBans; got != (bans.EarlierBans{
Limit: 1,
}) {
t.Errorf("earlier bans %+v, want 1 for a limit", got)
}
}
func TestLiftedBlacklistBanHoldsUntilItsEnd(t *testing.T) {
t.Parallel()
ledger := bans.New(defaultParams())
netblock := netip.MustParsePrefix("203.0.113.9/32")
now := midnight()
expires := now.Add(30 * day)
scores := map[netip.Prefix]int64{netblock: 100}
ledger.BanForAbuseIPDB(now, expires, scores)
ledger.Lift(netblock.Addr(), now)
// The admin lifted it: the blacklist fetched again until its end bans
// nothing.
later := expires.Add(-time.Hour)
if made := ledger.BanForAbuseIPDB(later, later.Add(30*day), scores); made != 0 {
t.Errorf("made %d bans before the lifted ban's end, want none", made)
}
// From its end on, the blacklist bans the netblock again, and the
// lifted ban, ended, is forgotten.
if made := ledger.BanForAbuseIPDB(expires, expires.Add(30*day), scores); made != 1 {
t.Errorf("made %d bans at the lifted ban's end, want 1", made)
}
wantBans(t, ledger, map[netip.Prefix]int{netblock: 1})
}
func TestEndedBlacklistBansAreForgottenAtTheNextFetch(t *testing.T) {
t.Parallel()
ledger := bans.New(defaultParams())
listed := netip.MustParsePrefix("203.0.113.9/32")
limited := netip.MustParsePrefix("203.0.113.10/32")
now := midnight()
expires := now.Add(30 * day)
ledger.BanForAbuseIPDB(now, expires, map[netip.Prefix]int64{listed: 100})
ledger.BanForLimit(limited, now, bans.Notes{})
// listed is off the blacklist when it is fetched after the ban's end.
if made := ledger.BanForAbuseIPDB(expires, expires.Add(30*day), nil); made != 0 {
t.Errorf("made %d bans for an empty blacklist, want none", made)
}
wantBans(t, ledger, map[netip.Prefix]int{listed: 0, limited: 1})
}
func TestBlacklistBansDoNotCountTowardMaxBans(t *testing.T) {
t.Parallel()
params := defaultParams()
params.MaxBans = 1
ledger := bans.New(params)
limited := netip.MustParsePrefix("203.0.113.1/32")
attacker := netip.MustParsePrefix("203.0.113.2/32")
now := midnight()
scores := map[netip.Prefix]int64{}
for i := range 3 {
scores[netip.PrefixFrom(netip.AddrFrom4([4]byte{198, 51, 100, byte(i)}), 32)] = 100
}
ledger.BanForLimit(limited, now, bans.Notes{})
if made := ledger.BanForAbuseIPDB(now, now.Add(30*day), scores); made != 3 {
t.Errorf("made %d bans for 3 netblocks, want 3", made)
}
wantBans(t, ledger, map[netip.Prefix]int{limited: 1})
// The ban for an attack takes the place of the one for a limit, and no
// blacklist ban goes.
ledger.BanForAttack(attacker, now, bans.Notes{})
want := map[netip.Prefix]int{limited: 0, attacker: 1}
for netblock := range scores {
want[netblock] = 1
}
wantBans(t, ledger, want)
}
+161 -34
View File
@@ -1,8 +1,9 @@
// Package bans is the ban ledger: the bans sww makes on the
// netblocks of clients that break a rate limit, a byte limit or the refusal
// limit or show a clear sign of attack, and those an admin makes, with their
// notes, as the "Bans" section of SPEC.md describes. The bans are kept in
// memory, and written to bans.json and read from it by the state package.
// limit or show a clear sign of attack, or are on AbuseIPDB's blacklist, and
// those an admin makes, with their notes, as the "Bans" section of SPEC.md
// describes. The bans are kept in memory, and written to bans.json and read
// from it by the state package.
package bans
import (
@@ -26,6 +27,9 @@ const (
// CauseAdmin is a ban an admin made, or one sww made that an
// admin keeps. It is never dropped.
CauseAdmin = "admin"
// CauseAbuseIPDB is a ban sww made for a client on AbuseIPDB's
// blacklist. It is forgotten once it has ended.
CauseAbuseIPDB = "abuseipdb"
)
// repeatFactor is how many times as long as the netblock's last ban a ban
@@ -50,10 +54,11 @@ type Params struct {
// AttackBanDuration is how long a first ban for a clear sign of attack
// lasts.
AttackBanDuration time.Duration
// MaxBans is the most bans held whose cause is not CauseAdmin, at
// least one. Past it, the earliest such ban of the netblock that has
// gone longest without a request is dropped. Bans whose cause is
// CauseAdmin are held besides, and never dropped.
// MaxBans is the most bans held whose cause is CauseLimit or
// CauseAttack, at least one. Past it, the earliest such ban of the
// netblock that has gone longest without a request is dropped. Bans
// whose cause is CauseAdmin or CauseAbuseIPDB are held besides, and
// never dropped this way.
MaxBans int
}
@@ -63,10 +68,11 @@ type Ban struct {
Start time.Time
// Expires is when the ban ends, zero for a permanent ban.
Expires time.Time
// Cause is CauseLimit, CauseAttack or CauseAdmin.
// Cause is CauseLimit, CauseAttack, CauseAdmin or CauseAbuseIPDB.
Cause string
// Reason is a short text: for a ban sww made, the limit broken or
// the rule that matched; for an admin's, what the admin wrote.
// Reason is a short text: for a ban sww made, the limit broken, the
// rule that matched or AbuseIPDB's score; for an admin's, what the
// admin wrote.
Reason string
// Lifted is when an admin lifted the ban, zero while no admin has. A
// lifted ban refuses nothing, and does not make the netblock's next
@@ -127,7 +133,8 @@ type Notes struct {
// log's reputation names them. It is left out when none did.
Reputation []ReputationHit `json:"reputation,omitempty"`
// Request is the request that broke the limit, or whose bytes broke
// it, or that was the clear sign of attack.
// it, or that was the clear sign of attack. A ban for AbuseIPDB's
// blacklist has none, and leaves it zero.
Request Request `json:"request"`
// Requests is how many requests the netblock has sent since it was
// first seen, and Refused how many of them the ban has refused so
@@ -150,9 +157,10 @@ type ReputationHit struct {
// EarlierBans counts a netblock's bans before a ban, by cause.
type EarlierBans struct {
Limit int `json:"limit"`
Attack int `json:"attack"`
Admin int `json:"admin"`
Limit int `json:"limit"`
Attack int `json:"attack"`
Admin int `json:"admin"`
AbuseIPDB int `json:"abuseipdb"`
}
// Request is a request in a ban's notes. Each text is cut to 256 bytes.
@@ -180,8 +188,8 @@ type Ledger struct {
// netblocks holds each banned netblock's bans, oldest first. Check and
// Find make each netblock they find the most recently seen.
netblocks *simplelru.LRU[netip.Prefix, *[]Ban]
// held is how many bans netblocks holds whose cause is not CauseAdmin,
// at most params.MaxBans.
// held is how many bans netblocks holds whose cause is CauseLimit or
// CauseAttack, at most params.MaxBans.
held int
// made is how many bans have been made since the start, by cause: by
// the ledger, and by an admin, through BanForAdmin or in an edit of
@@ -198,8 +206,9 @@ type Ledger struct {
// New returns a Ledger with no ban yet.
func New(params Params) *Ledger {
// The ledger drops bans itself, and never those whose cause is
// CauseAdmin, however many there are, so the LRU has no limit of its
// own: it keeps the netblocks in the order they were last seen.
// CauseAdmin or CauseAbuseIPDB to make room, however many there are, so
// the LRU has no limit of its own: it keeps the netblocks in the order
// they were last seen.
netblocks, err := simplelru.NewLRU[netip.Prefix, *[]Ban](
math.MaxInt,
nil,
@@ -429,6 +438,88 @@ func (l *Ledger) BanForAdmin(
return ban
}
// BanForAbuseIPDB bans each netblock in scores at now until expires, and
// returns how many bans it made. scores are the netblocks of the clients
// on AbuseIPDB's blacklist, each with the highest score of its clients.
// A netblock is left as it is while a ban on it is active, or while a ban
// for the blacklist that an admin lifted has not reached its end: the
// admin's lift holds that long. Each ban whose cause is CauseAbuseIPDB
// and that has ended is forgotten first, so that the bans held for the
// blacklist are those of the clients listed within one ban's length.
func (l *Ledger) BanForAbuseIPDB(
now, expires time.Time, scores map[netip.Prefix]int64,
) int {
l.mu.Lock()
defer l.mu.Unlock()
changed := l.forgetEndedAbuseIPDBBans(now)
made := 0
for netblock, score := range scores {
netblock = netblock.Masked()
var notes Notes
if held, found := l.netblocks.Peek(netblock); found {
if activeBan(*held, now) != nil ||
liftedAbuseIPDBBan(*held, now) {
continue
}
notes.EarlierBans = earlierBans(*held)
}
// The source is named as the request log names AbuseIPDB.
notes.Reputation = []ReputationHit{
{Source: CauseAbuseIPDB, Score: &score},
}
l.add(Ban{
Netblock: netblock,
Start: now,
Expires: expires,
Cause: CauseAbuseIPDB,
Reason: fmt.Sprintf(
"on AbuseIPDB's blacklist with a score of %d", score,
),
Notes: notes,
})
made++
}
l.made[CauseAbuseIPDB] += made
if changed || made > 0 {
l.markChanged()
}
return made
}
// ForgetEndedAbuseIPDBBans forgets the bans whose cause is CauseAbuseIPDB
// and that have ended at now, as BanForAbuseIPDB does first. The state
// package calls it each time it reads bans.json, so that these bans are
// also forgotten while no fetch of the blacklist reaches the ledger.
func (l *Ledger) ForgetEndedAbuseIPDBBans(now time.Time) {
l.mu.Lock()
defer l.mu.Unlock()
if l.forgetEndedAbuseIPDBBans(now) {
l.markChanged()
}
}
// liftedAbuseIPDBBan reports whether bans, a netblock's, hold a ban whose
// cause is CauseAbuseIPDB that an admin lifted, and whose end is not
// reached at now.
func liftedAbuseIPDBBan(bans []Ban, now time.Time) bool {
return slices.ContainsFunc(bans, func(ban Ban) bool {
return ban.Cause == CauseAbuseIPDB && !ban.Lifted.IsZero() &&
(ban.Permanent() || now.Before(ban.Expires))
})
}
// Lift lifts, at now, every ban active then on a netblock client is in,
// as an admin does, and returns those bans. A lifted ban is kept, refuses
// nothing, and does not make the netblock's next ban longer.
@@ -515,9 +606,9 @@ func (l *Ledger) AddLookup(
}
// Made returns how many bans for cause have been made since the start:
// for CauseLimit and CauseAttack, by the ledger; for CauseAdmin, by an
// admin, with BanForAdmin or in an edit of bans.json, as LoadEdit counts
// them. The bans read from bans.json at the start are not among them.
// for CauseLimit, CauseAttack and CauseAbuseIPDB, by the ledger; for
// CauseAdmin, by an admin, with BanForAdmin or in an edit of bans.json, as
// LoadEdit counts them. The bans read from bans.json at the start are not among them.
func (l *Ledger) Made(cause string) int {
l.mu.Lock()
defer l.mu.Unlock()
@@ -574,8 +665,8 @@ func (l *Ledger) Snapshot() []Ban {
// seen. A ban without a cause is an admin's, and gets CauseAdmin. Each
// netblock is masked to its length, so that 203.0.113.9/24 is
// 203.0.113.0/24, and each text in the notes is cut to 256 bytes. Past
// MaxBans the earliest bans whose cause is not CauseAdmin are dropped, as
// when they are made.
// MaxBans the earliest bans that count toward it are dropped, as when they
// are made.
func (l *Ledger) Load(bans []Ban) {
l.mu.Lock()
defer l.mu.Unlock()
@@ -639,6 +730,35 @@ func (l *Ledger) holds(netblock netip.Prefix, start time.Time) bool {
})
}
// forgetEndedAbuseIPDBBans forgets each ban whose cause is CauseAbuseIPDB
// and whose end is reached at now, lifted or not, and each netblock left
// without a ban. It reports whether it forgot one.
func (l *Ledger) forgetEndedAbuseIPDBBans(now time.Time) bool {
forgot := false
for _, netblock := range l.netblocks.Keys() {
bans, _ := l.netblocks.Peek(netblock)
kept := slices.DeleteFunc(*bans, func(ban Ban) bool {
return ban.Cause == CauseAbuseIPDB && !ban.Permanent() &&
!now.Before(ban.Expires)
})
if len(kept) == len(*bans) {
continue
}
forgot = true
if len(kept) == 0 {
l.netblocks.Remove(netblock)
} else {
*bans = kept
}
}
return forgot
}
// ban bans netblock at now for cause, CauseLimit or CauseAttack, with
// reason and notes, as BanForLimit and BanForAttack describe, and returns
// the ban, and whether it made it. Unless keep is true, the ban is not
@@ -714,13 +834,16 @@ func earlierBans(held []Ban) EarlierBans {
fromHere.Attack++
case CauseAdmin:
fromHere.Admin++
case CauseAbuseIPDB:
fromHere.AbuseIPDB++
}
notes := ban.Notes.EarlierBans
count := EarlierBans{
Limit: notes.Limit + fromHere.Limit,
Attack: notes.Attack + fromHere.Attack,
Admin: notes.Admin + fromHere.Admin,
Limit: notes.Limit + fromHere.Limit,
Attack: notes.Attack + fromHere.Attack,
Admin: notes.Admin + fromHere.Admin,
AbuseIPDB: notes.AbuseIPDB + fromHere.AbuseIPDB,
}
// Of counts that name as many bans, the earlier ban's is taken: it
@@ -735,7 +858,7 @@ func earlierBans(held []Ban) EarlierBans {
// total returns how many bans e counts, of all causes.
func (e EarlierBans) total() int {
return e.Limit + e.Attack + e.Admin
return e.Limit + e.Attack + e.Admin + e.AbuseIPDB
}
// markChanged has Changed receive a value, unless one is waiting already.
@@ -806,9 +929,9 @@ func (l *Ledger) covering(client netip.Addr) []*[]Ban {
// add adds ban to its netblock's bans, after the last, and makes its
// netblock the most recently seen. With MaxBans held, it drops one first,
// unless ban's cause is CauseAdmin, which does not count toward MaxBans.
// unless ban does not count toward MaxBans.
func (l *Ledger) add(ban Ban) {
counted := ban.Cause != CauseAdmin
counted := countsTowardMaxBans(ban)
if counted && l.held == l.params.MaxBans {
l.dropOne()
}
@@ -889,7 +1012,13 @@ func (l *Ledger) attackExpiry(held []Ban, now time.Time) time.Time {
return now.Add(l.params.AttackBanDuration)
}
// dropOne drops the earliest ban whose cause is not CauseAdmin of the
// countsTowardMaxBans reports whether ban counts toward MaxBans: its cause
// is CauseLimit or CauseAttack.
func countsTowardMaxBans(ban Ban) bool {
return ban.Cause == CauseLimit || ban.Cause == CauseAttack
}
// dropOne drops the earliest ban that counts toward MaxBans of the
// netblock that has gone longest without a request, of those that hold
// such a ban, and the netblock with it if that was its only ban. It is
// called with at least one such ban held. It looks at each netblock once
@@ -898,11 +1027,9 @@ func (l *Ledger) dropOne() {
for range l.netblocks.Len() {
netblock, bans, _ := l.netblocks.GetOldest()
i := slices.IndexFunc(*bans, func(ban Ban) bool {
return ban.Cause != CauseAdmin
})
i := slices.IndexFunc(*bans, countsTowardMaxBans)
if i < 0 {
// Its bans are all an admin's, and never dropped. Get makes
// None of its bans is dropped to make room. Get makes
// it the most recently seen, so that the next netblock is
// looked at; when it was seen matters only for dropping a
// ban, and a ban added to it makes it the most recently seen
+183 -48
View File
@@ -27,6 +27,19 @@ import (
"sneak.berlin/go/smallwebwaf/internal/remotelog"
)
// The names of the settings that waf writes into log lines and ban notes,
// as the setting that refused a request or lowered a client's limits.
const (
ExclusivelyAllowedCountriesSetting = "SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES"
TagLimitPercentSetting = "SWW_WAF_TAG_LIMIT_PERCENT"
ASNBytesLimitPercentSetting = "SWW_WAF_ASN_BYTES_LIMIT_PERCENT"
CountryBytesLimitPercentSetting = "SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT"
UnknownCountryLimitPercentSetting = "SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT"
ASNLimitPercentURLSetting = "SWW_WAF_ASN_LIMIT_PERCENT_URL"
BlocklistActionSetting = "SWW_WAF_BLOCKLIST_ACTION"
DNSBLAbuseIPDBActionSetting = "SWW_WAF_DNSBL_ABUSEIPDB_ACTION"
)
// WAF is the settings of `sww waf`. A time or size limit of zero is off.
type WAF struct {
// ListenAddr is where waf listens (SWW_WAF_LISTEN_ADDR).
@@ -75,7 +88,7 @@ type WAF struct {
BytesLimitPerMinute int64
BytesLimitPerHour int64
BytesLimitPerDay int64
BytesCounted string
BytesCounted BytesCounted
// LookupSource is where each client's AS number and country are looked
// up (SWW_WAF_LOOKUP_SOURCE): geojs, file, or off for nowhere.
// LookupDBPath is the lookup database, the IPinfo Lite file looked up in
@@ -86,7 +99,7 @@ type WAF struct {
// AddLookupHeaders is true when the app is passed the client's AS number
// and country in headers (SWW_WAF_ADD_LOOKUP_HEADERS), by default unless
// LookupSource is off.
LookupSource string
LookupSource LookupSource
LookupDBPath string
ASNAndCountryLookupTimeout time.Duration
AddLookupHeaders bool
@@ -131,7 +144,7 @@ type WAF struct {
// BlocklistLimitPercent is the percentage of every limit it gets.
BlocklistURLs []string
BlocklistRefresh time.Duration
BlocklistAction string
BlocklistAction ReputationAction
BlocklistLimitPercent int64
// DNSBLZones are the DNSBL zones clients are asked about
// (SWW_WAF_DNSBL_ZONES), through DNSBLResolver (SWW_WAF_DNSBL_RESOLVER), or
@@ -154,10 +167,18 @@ type WAF struct {
AbuseIPDBKey string
AbuseIPDBMinScore int64
AbuseIPDBDailyBudget int
DNSBLAbuseIPDBAction string
DNSBLAbuseIPDBAction ReputationAction
DNSBLAbuseIPDBLimitPercent int64
IPReputationCacheTTL time.Duration
DNSBLAbuseIPDBTimeout time.Duration
// While AbuseIPDBKey is set, AbuseIPDB's blacklist of the clients it
// scores AbuseIPDBThreshold or more (SWW_WAF_ABUSEIPDB_THRESHOLD), from
// 25 to 100, is fetched at the start and every AbuseIPDBBlacklistRefresh
// (SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS). Each client on it
// is banned for AbuseIPDBBanDuration (SWW_WAF_ABUSEIPDB_BAN_DAYS).
AbuseIPDBThreshold int64
AbuseIPDBBlacklistRefresh time.Duration
AbuseIPDBBanDuration time.Duration
// BanResponse is the status a refused client is answered with, 403
// or 429, or 0 to close the connection without an answer
// (SWW_WAF_BAN_RESPONSE). It answers a banned client, a request that
@@ -229,7 +250,7 @@ type WAF struct {
// reads none.
// CoreRuleSetExclusionsFile is the path of the file of its exclusions
// (SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE), "" while there is none.
CoreRuleSetMode string
CoreRuleSetMode CoreRuleSetMode
CoreRuleSetParanoiaLevel int
CoreRuleSetScoreThreshold int
CoreRuleSetDisabledRules []int
@@ -308,20 +329,66 @@ type WAF struct {
settings []slog.Attr
}
// BytesCounted is which body bytes count toward the byte limits and the
// byte anomaly thresholds, a value of SWW_WAF_BYTES_COUNTED.
type BytesCounted string
// The values of SWW_WAF_BYTES_COUNTED.
const (
// BytesCountedResponse counts the response's body bytes.
BytesCountedResponse BytesCounted = "response"
// BytesCountedRequest counts the request's body bytes.
BytesCountedRequest BytesCounted = "request"
// BytesCountedBoth counts the body bytes of both.
BytesCountedBoth BytesCounted = "both"
)
// LookupSource is where each client's AS number and country are looked up,
// a value of SWW_WAF_LOOKUP_SOURCE.
type LookupSource string
// The values of SWW_WAF_LOOKUP_SOURCE.
const (
// LookupSourceGeoJS asks GeoJS.
LookupSourceGeoJS LookupSource = "geojs"
// LookupSourceFile looks clients up in the lookup database, the file
// SWW_WAF_LOOKUP_DB_PATH names.
LookupSourceFile LookupSource = "file"
// LookupSourceOff looks no client up.
LookupSourceOff LookupSource = "off"
)
// ReputationAction is what is done with a client a reputation source
// lists, a value of SWW_WAF_BLOCKLIST_ACTION and of
// SWW_WAF_DNSBL_ABUSEIPDB_ACTION.
type ReputationAction string
// The values of SWW_WAF_BLOCKLIST_ACTION and SWW_WAF_DNSBL_ABUSEIPDB_ACTION.
const (
// ReputationActionDeny refuses the client's requests.
ReputationActionDeny ReputationAction = "deny"
// ReputationActionLimit gives the client a percentage of every limit,
// written limit:<percent> in the setting.
ReputationActionLimit ReputationAction = "limit"
// ReputationActionLog only notes the hit in the log line and raises an
// alert.
ReputationActionLog ReputationAction = "log"
)
// CoreRuleSetMode is what the Core Rule Set does, a value of
// SWW_WAF_CORE_RULE_SET_MODE.
type CoreRuleSetMode string
// The values of SWW_WAF_CORE_RULE_SET_MODE.
const (
// CoreRuleSetModeOff runs no request through the Core Rule Set.
CoreRuleSetModeOff = off
CoreRuleSetModeOff CoreRuleSetMode = "off"
// CoreRuleSetModeDetect logs and alerts a match, and refuses nothing.
CoreRuleSetModeDetect = "detect"
CoreRuleSetModeDetect CoreRuleSetMode = "detect"
// CoreRuleSetModeBlock refuses a match with 403.
CoreRuleSetModeBlock = "block"
CoreRuleSetModeBlock CoreRuleSetMode = "block"
)
// fileSource is the SWW_WAF_LOOKUP_SOURCE that looks clients up in the
// lookup database, the file SWW_WAF_LOOKUP_DB_PATH names.
const fileSource = "file"
const (
day = 24 * time.Hour
ipv4Bits = 32
@@ -330,6 +397,9 @@ const (
// netblock a provider is usually given: a shorter one would make one
// client of the customers of several providers.
minIPv6GroupPrefix = 32
// minAbuseIPDBThreshold is the lowest score AbuseIPDB's blacklist can
// be cut at.
minAbuseIPDBThreshold = 25
// minTokenLength is the fewest characters a token may have.
minTokenLength = 32
// maxParanoiaLevel is the Core Rule Set's highest paranoia level.
@@ -446,6 +516,13 @@ var (
errNotPercent = errors.New(
"is not a percentage, a whole number from 0 to 100",
)
errNotAbuseIPDBThreshold = errors.New(
"is not a whole number from 25 to 100, the scores AbuseIPDB's " +
"blacklist can be cut at",
)
errNotWholeUnits = errors.New(
"is not a whole number above zero, such as 30, that fits a duration",
)
errListedTwice = errors.New("is listed twice")
errNotListURL = errors.New(
"is not an http or https URL without a user or a fragment, " +
@@ -540,10 +617,13 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
),
BytesLimitPerHour: env.size("SWW_WAF_BYTES_LIMIT_PER_HOUR", "50G"),
BytesLimitPerDay: env.size("SWW_WAF_BYTES_LIMIT_PER_DAY", "100G"),
BytesCounted: env.bytesCounted("SWW_WAF_BYTES_COUNTED", "both"),
BytesCounted: env.bytesCounted(
"SWW_WAF_BYTES_COUNTED",
BytesCountedBoth,
),
LookupSource: env.lookupSource(
"SWW_WAF_LOOKUP_SOURCE",
"geojs",
LookupSourceGeoJS,
),
LookupDBPath: env.value("SWW_WAF_LOOKUP_DB_PATH", ""),
ASNAndCountryLookupTimeout: env.milliseconds(
@@ -551,24 +631,24 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
"800",
),
ExclusivelyAllowedCountries: env.countries(
"SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES", ""),
ExclusivelyAllowedCountriesSetting, ""),
TagLists: env.tagLists("SWW_WAF_TAG_LISTS"),
TagDeny: env.tags("SWW_WAF_TAG_DENY"),
TagLimitPercent: env.tagPercents("SWW_WAF_TAG_LIMIT_PERCENT"),
TagLimitPercent: env.tagPercents(TagLimitPercentSetting),
RouteWatchURL: env.routeWatchURL("SWW_WAF_ROUTEWATCH_URL"),
ASNBytesLimitPercent: env.percents(
"SWW_WAF_ASN_BYTES_LIMIT_PERCENT",
ASNBytesLimitPercentSetting,
ParseASN,
),
CountryBytesLimitPercent: env.percents(
"SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT",
CountryBytesLimitPercentSetting,
parseCountry,
),
UnknownCountryLimitPercent: env.percent(
"SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT",
UnknownCountryLimitPercentSetting,
"100",
),
ASNLimitPercentURL: env.listURL("SWW_WAF_ASN_LIMIT_PERCENT_URL"),
ASNLimitPercentURL: env.listURL(ASNLimitPercentURLSetting),
BlocklistURLs: env.listURLs("SWW_WAF_BLOCKLIST_URLS"),
BlocklistRefresh: env.refresh("SWW_WAF_BLOCKLIST_REFRESH", "24h"),
DNSBLZones: env.zones("SWW_WAF_DNSBL_ZONES"),
@@ -587,6 +667,20 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
"SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS",
"2000",
),
AbuseIPDBThreshold: env.abuseIPDBThreshold(
"SWW_WAF_ABUSEIPDB_THRESHOLD",
"90",
),
AbuseIPDBBlacklistRefresh: env.wholeUnits(
"SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS",
"60",
time.Minute,
),
AbuseIPDBBanDuration: env.wholeUnits(
"SWW_WAF_ABUSEIPDB_BAN_DAYS",
"30",
day,
),
BanResponse: env.banResponse("SWW_WAF_BAN_RESPONSE", "403"),
LimitBanDuration: env.durationNotOff(
"SWW_WAF_LIMIT_BAN_DURATION",
@@ -726,11 +820,11 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
cfg.InstanceName, cfg.LogRemoteURL != nil)
// The app gets the headers by default, unless no client is looked up.
cfg.AddLookupHeaders = env.boolean("SWW_WAF_ADD_LOOKUP_HEADERS",
strconv.FormatBool(cfg.LookupSource != off))
strconv.FormatBool(cfg.LookupSource != LookupSourceOff))
cfg.BlocklistAction, cfg.BlocklistLimitPercent = env.action(
"SWW_WAF_BLOCKLIST_ACTION", "deny")
BlocklistActionSetting, string(ReputationActionDeny))
cfg.DNSBLAbuseIPDBAction, cfg.DNSBLAbuseIPDBLimitPercent = env.action(
"SWW_WAF_DNSBL_ABUSEIPDB_ACTION", "limit:25")
DNSBLAbuseIPDBActionSetting, "limit:25")
env.checkInstanceNameForNtfy(cfg.InstanceName, cfg.AlertNtfyURL != nil)
env.checkLookupDBPath(cfg)
@@ -826,9 +920,12 @@ func (e *environment) count(name, defaultValue string) int64 {
// bytesCounted reads the setting that is which body bytes count toward the
// byte limits and the byte anomaly thresholds: response, request or both.
func (e *environment) bytesCounted(name, defaultValue string) string {
value := e.value(name, defaultValue)
if value != "response" && value != "request" && value != "both" {
func (e *environment) bytesCounted(
name string, defaultValue BytesCounted,
) BytesCounted {
value := BytesCounted(e.value(name, string(defaultValue)))
if value != BytesCountedResponse && value != BytesCountedRequest &&
value != BytesCountedBoth {
e.check(name, fmt.Errorf("%q %w", value, errNotBytesCounted))
}
@@ -873,8 +970,10 @@ func (e *environment) trapPaths(name string) []string {
// coreRuleSetMode reads the setting that is what the Core Rule Set does: off,
// detect or block.
func (e *environment) coreRuleSetMode(name, defaultValue string) string {
mode := e.value(name, defaultValue)
func (e *environment) coreRuleSetMode(
name string, defaultValue CoreRuleSetMode,
) CoreRuleSetMode {
mode := CoreRuleSetMode(e.value(name, string(defaultValue)))
if mode != CoreRuleSetModeOff && mode != CoreRuleSetModeDetect &&
mode != CoreRuleSetModeBlock {
e.check(name, fmt.Errorf("%q %w", mode, errNotCoreRuleSetMode))
@@ -957,6 +1056,35 @@ func (e *environment) percent(name, defaultValue string) int64 {
return percent
}
// abuseIPDBThreshold reads the setting that is the least score of the
// clients on AbuseIPDB's blacklist: a whole number from 25 to 100, the
// range AbuseIPDB takes.
func (e *environment) abuseIPDBThreshold(name, defaultValue string) int64 {
value := e.value(name, defaultValue)
threshold, err := strconv.ParseInt(value, 10, 64)
if err != nil || threshold < minAbuseIPDBThreshold || threshold > 100 {
e.check(name, fmt.Errorf("%q %w", value, errNotAbuseIPDBThreshold))
}
return threshold
}
// wholeUnits reads a setting that is a whole number above zero of unit,
// such as minutes or days, and returns it as a duration.
func (e *environment) wholeUnits(
name, defaultValue string, unit time.Duration,
) time.Duration {
value := e.value(name, defaultValue)
n, err := strconv.ParseInt(value, 10, 64)
if err != nil || n <= 0 || n > math.MaxInt64/int64(unit) {
e.check(name, fmt.Errorf("%q %w", value, errNotWholeUnits))
}
return time.Duration(n) * unit
}
// listURL reads a setting that is the URL a list is fetched from, "" while
// it is unset or empty.
func (e *environment) listURL(name string) string {
@@ -995,20 +1123,24 @@ func (e *environment) refresh(name, defaultValue string) time.Duration {
// action reads a setting that is what is done with a client a blocklist
// or a DNSBL zone lists: deny, log, or limit:<percent>, which it returns
// as limit and the percentage.
func (e *environment) action(name, defaultValue string) (string, int64) {
value := e.value(name, defaultValue)
if value == "deny" || value == "log" {
func (e *environment) action(
name, defaultValue string,
) (ReputationAction, int64) {
value := ReputationAction(e.value(name, defaultValue))
if value == ReputationActionDeny || value == ReputationActionLog {
return value, 0
}
percentText, isLimit := strings.CutPrefix(value, "limit:")
percentText, isLimit := strings.CutPrefix(
string(value), string(ReputationActionLimit)+":",
)
percent, err := ParsePercent(percentText)
if !isLimit || err != nil {
e.check(name, fmt.Errorf("%q %w", value, errNotAction))
}
return "limit", percent
return ReputationActionLimit, percent
}
// zones reads the setting that is the list of DNSBL zones. It is empty by
@@ -1059,9 +1191,12 @@ func (e *environment) routeWatchURL(name string) string {
// lookupSource reads the setting that is where clients are looked up:
// geojs, file, or off.
func (e *environment) lookupSource(name, defaultValue string) string {
source := e.value(name, defaultValue)
if source != "geojs" && source != fileSource && source != off {
func (e *environment) lookupSource(
name string, defaultValue LookupSource,
) LookupSource {
source := LookupSource(e.value(name, string(defaultValue)))
if source != LookupSourceGeoJS && source != LookupSourceFile &&
source != LookupSourceOff {
e.check(name, fmt.Errorf("%q %w", source, errNotLookupSource))
}
@@ -1073,12 +1208,12 @@ func (e *environment) lookupSource(name, defaultValue string) string {
// one source at a time.
func (e *environment) checkLookupDBPath(cfg *WAF) {
switch {
case cfg.LookupSource == fileSource && cfg.LookupDBPath == "":
case cfg.LookupSource == LookupSourceFile && cfg.LookupDBPath == "":
e.check("SWW_WAF_LOOKUP_SOURCE", fmt.Errorf(
"is file while SWW_WAF_LOOKUP_DB_PATH is unset; %w",
errNeedsDBPath,
))
case cfg.LookupSource != fileSource && cfg.LookupDBPath != "":
case cfg.LookupSource != LookupSourceFile && cfg.LookupDBPath != "":
e.check("SWW_WAF_LOOKUP_DB_PATH", fmt.Errorf(
"is set while SWW_WAF_LOOKUP_SOURCE is %s; %w",
cfg.LookupSource,
@@ -1098,12 +1233,12 @@ func (e *environment) checkLookupDBPath(cfg *WAF) {
func (e *environment) checkCountriesAndLookups(cfg *WAF) {
for _, country := range cfg.ExclusivelyAllowedCountries {
if slices.Contains(cfg.TagDeny, CountryTagPrefix+country) {
e.check("SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES",
e.check(ExclusivelyAllowedCountriesSetting,
fmt.Errorf("%q %w", country, errOnBothLists))
}
}
if cfg.LookupSource != off {
if cfg.LookupSource != LookupSourceOff {
return
}
@@ -1117,15 +1252,15 @@ func (e *environment) checkCountriesAndLookups(cfg *WAF) {
name string
set bool
}{
{"SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES", len(cfg.ExclusivelyAllowedCountries) > 0},
{ExclusivelyAllowedCountriesSetting, len(cfg.ExclusivelyAllowedCountries) > 0},
{"SWW_WAF_ADD_LOOKUP_HEADERS", cfg.AddLookupHeaders},
{"SWW_WAF_TAG_DENY", slices.ContainsFunc(cfg.TagDeny, onlyLookupGives)},
{"SWW_WAF_TAG_LIMIT_PERCENT", slices.ContainsFunc(
{TagLimitPercentSetting, slices.ContainsFunc(
slices.Collect(maps.Keys(cfg.TagLimitPercent)), onlyLookupGives)},
{"SWW_WAF_ASN_BYTES_LIMIT_PERCENT", len(cfg.ASNBytesLimitPercent) > 0},
{"SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT", len(cfg.CountryBytesLimitPercent) > 0},
{"SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT", cfg.UnknownCountryLimitPercent < 100},
{"SWW_WAF_ASN_LIMIT_PERCENT_URL", cfg.ASNLimitPercentURL != ""},
{ASNBytesLimitPercentSetting, len(cfg.ASNBytesLimitPercent) > 0},
{CountryBytesLimitPercentSetting, len(cfg.CountryBytesLimitPercent) > 0},
{UnknownCountryLimitPercentSetting, cfg.UnknownCountryLimitPercent < 100},
{ASNLimitPercentURLSetting, cfg.ASNLimitPercentURL != ""},
{"SWW_WAF_ANOMALY_ASN_REQUESTS_PER_MINUTE", cfg.AnomalyASN.RequestsPerMinute > 0},
{"SWW_WAF_ANOMALY_ASN_REQUESTS_PER_HOUR", cfg.AnomalyASN.RequestsPerHour > 0},
{"SWW_WAF_ANOMALY_ASN_BYTES_PER_MINUTE", cfg.AnomalyASN.BytesPerMinute > 0},
@@ -1145,7 +1280,7 @@ func (e *environment) checkCountriesAndLookups(cfg *WAF) {
// blocklist too: the file at a URL is fetched as one list or the other.
func (e *environment) checkASNLimitPercentURL(cfg *WAF) {
if slices.Contains(cfg.BlocklistURLs, cfg.ASNLimitPercentURL) {
e.check("SWW_WAF_ASN_LIMIT_PERCENT_URL",
e.check(ASNLimitPercentURLSetting,
fmt.Errorf("%q %w", cfg.ASNLimitPercentURL, errInBlocklistURLs))
}
}
@@ -1172,7 +1307,7 @@ func (e *environment) checkTags(cfg *WAF) {
}
for tag := range cfg.TagLimitPercent {
e.check("SWW_WAF_TAG_LIMIT_PERCENT", checkTag(cfg, tag))
e.check(TagLimitPercentSetting, checkTag(cfg, tag))
}
}
+81 -5
View File
@@ -61,6 +61,9 @@ const (
abuseIPDBKey = "SWW_WAF_ABUSEIPDB_KEY"
abuseIPDBMinScore = "SWW_WAF_ABUSEIPDB_MIN_SCORE"
abuseIPDBDailyBudget = "SWW_WAF_ABUSEIPDB_DAILY_BUDGET"
abuseIPDBThreshold = "SWW_WAF_ABUSEIPDB_THRESHOLD"
abuseIPDBBlacklistRefresh = "SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS"
abuseIPDBBanDays = "SWW_WAF_ABUSEIPDB_BAN_DAYS"
dnsblAbuseIPDBAction = "SWW_WAF_DNSBL_ABUSEIPDB_ACTION"
ipReputationCacheTTL = "SWW_WAF_IP_REPUTATION_CACHE_TTL"
dnsblAbuseIPDBTimeout = "SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS"
@@ -611,7 +614,7 @@ func TestCoreRuleSetSettings(t *testing.T) {
},
{
environment{
coreRuleSetMode: config.CoreRuleSetModeDetect,
coreRuleSetMode: string(config.CoreRuleSetModeDetect),
coreRuleSetParanoiaLevel: "4",
coreRuleSetScoreThreshold: "10",
coreRuleSetDisabledRules: "942100, 920350",
@@ -2030,8 +2033,9 @@ func TestReputationSettingsAsSet(t *testing.T) {
}
for _, tc := range []struct {
value, action string
percent int64
value string
action config.ReputationAction
percent int64
}{
{actionDeny, actionDeny, 0},
{actionLog, actionLog, 0},
@@ -2164,7 +2168,7 @@ func TestDNSBLSettingsAsSet(t *testing.T) {
// want are the zones, resolver, action and percent config.WAF gives.
want []string
wantResolver string
wantAction string
wantAction config.ReputationAction
wantPercent int64
}{
{
@@ -2399,6 +2403,75 @@ func TestAbuseIPDBSettingsAsSet(t *testing.T) {
}
}
func TestAbuseIPDBBlacklistSettingsAsSet(t *testing.T) {
t.Parallel()
cfg := wafFromEnvironment(t, environment{})
if cfg.AbuseIPDBThreshold != 90 ||
cfg.AbuseIPDBBlacklistRefresh != time.Hour ||
cfg.AbuseIPDBBanDuration != 30*24*time.Hour {
t.Errorf(
"by default, the threshold %d, the refresh %s and the ban %s, "+
"want 90, 1h and 720h",
cfg.AbuseIPDBThreshold,
cfg.AbuseIPDBBlacklistRefresh,
cfg.AbuseIPDBBanDuration,
)
}
cfg = wafFromEnvironment(t, environment{
abuseIPDBThreshold: "25", abuseIPDBBlacklistRefresh: "1440",
abuseIPDBBanDays: "1",
})
if cfg.AbuseIPDBThreshold != 25 ||
cfg.AbuseIPDBBlacklistRefresh != 24*time.Hour ||
cfg.AbuseIPDBBanDuration != 24*time.Hour {
t.Errorf(
"set, the threshold %d, the refresh %s and the ban %s, "+
"want 25, 24h and 24h",
cfg.AbuseIPDBThreshold,
cfg.AbuseIPDBBlacklistRefresh,
cfg.AbuseIPDBBanDuration,
)
}
}
func TestInvalidAbuseIPDBBlacklistSettingStopsTheStartSayingWhatIsWrong(
t *testing.T,
) {
t.Parallel()
const (
notThreshold = " is not a whole number from 25 to 100, the scores " +
"AbuseIPDB's blacklist can be cut at"
notWhole = " is not a whole number above zero, such as 30, that fits " +
"a duration"
)
for _, tc := range []struct{ name, value, want string }{
{abuseIPDBThreshold, "24", `"24"` + notThreshold},
{abuseIPDBThreshold, "101", `"101"` + notThreshold},
{abuseIPDBThreshold, off, `"off"` + notThreshold},
{abuseIPDBBlacklistRefresh, "0", `"0"` + notWhole},
{abuseIPDBBlacklistRefresh, "1h", `"1h"` + notWhole},
{abuseIPDBBanDays, "-1", `"-1"` + notWhole},
{abuseIPDBBanDays, "200000", `"200000"` + notWhole},
} {
t.Run(tc.name+"="+tc.value, func(t *testing.T) {
t.Parallel()
_, err := config.WAFFromEnvironment(
environment{tc.name: tc.value}.viper(),
)
want := tc.name + ": " + tc.want
if err == nil || err.Error() != want {
t.Errorf("error %v, want %s", err, want)
}
})
}
}
func TestInvalidAbuseIPDBSettingStopsTheStartSayingWhatIsWrong(
t *testing.T,
) {
@@ -2951,6 +3024,9 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
abuseIPDBKey: "",
abuseIPDBMinScore: "75",
abuseIPDBDailyBudget: "900",
abuseIPDBThreshold: "90",
abuseIPDBBlacklistRefresh: "60",
abuseIPDBBanDays: "30",
dnsblAbuseIPDBAction: "limit:25",
ipReputationCacheTTL: defaultIPReputationCacheTTL,
dnsblAbuseIPDBTimeout: "2000",
@@ -2974,7 +3050,7 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
logLevel: "info",
ruleFilesDir: "/etc/sww/rules.d",
ruleFilesEnabled: "true",
coreRuleSetMode: config.CoreRuleSetModeBlock,
coreRuleSetMode: string(config.CoreRuleSetModeBlock),
coreRuleSetParanoiaLevel: "1",
coreRuleSetScoreThreshold: "5",
coreRuleSetDisabledRules: defaultCoreRuleSetDisabledRules,
+47 -14
View File
@@ -99,8 +99,13 @@ type GeoJS struct {
// waiting are the clients without an answer: those to ask GeoJS about,
// and those it is being asked about.
waiting map[netip.Prefix]*wait
// asking is true while a request to GeoJS is under way.
asking bool
// asking is true while a request to GeoJS is under way, and endAsking
// ends it. stopped is true once StopAsking has been called, and
// askGoroutines waits for the goroutine that makes the requests.
asking bool
endAsking context.CancelFunc
stopped bool
askGoroutines sync.WaitGroup
// retryDelay is how long GeoJS is left alone after its last failure,
// zero after an answer; retryAt is when it may be asked again.
retryDelay time.Duration
@@ -210,6 +215,23 @@ func (g *GeoJS) LookUpWithoutWaiting(
return answer
}
// StopAsking ends the request to GeoJS under way, and returns once the
// goroutine that made it has. A request it ends is no failure: Failed is not
// called, and GeoJS is not left alone after it. After StopAsking, GeoJS is
// asked nothing.
func (g *GeoJS) StopAsking() {
g.mu.Lock()
g.stopped = true
if g.asking {
g.endAsking()
}
g.mu.Unlock()
g.askGoroutines.Wait()
}
// Kept returns client's answer, if one is kept, without asking GeoJS.
func (g *GeoJS) Kept(client netip.Prefix) (Answer, bool) {
g.mu.Lock()
@@ -294,7 +316,8 @@ func (g *GeoJS) answerOrWait(
}
if !g.asking {
// GeoJS is left alone after a failure, so no answer can come.
// GeoJS is left alone after a failure, or asked nothing after
// StopAsking, so no answer can come.
w.late = true
}
@@ -323,22 +346,28 @@ func (g *GeoJS) kept(client netip.Prefix) (Answer, bool) {
}
// ask starts asking GeoJS about the waiting clients, unless a request to
// it is under way or it is left alone after a failure. The requests to
// GeoJS are for every client waiting, so they go on when the caller whose
// ctx is given stops waiting.
// it is under way, it is left alone after a failure, or StopAsking has
// been called. The requests to GeoJS are for every client waiting, so they
// go on when the caller whose ctx is given stops waiting, until StopAsking.
func (g *GeoJS) ask(ctx context.Context) {
if g.asking || g.now().Before(g.retryAt) {
if g.asking || g.stopped || g.now().Before(g.retryAt) {
return
}
g.asking = true
askCtx, end := context.WithCancel(context.WithoutCancel(ctx))
g.asking, g.endAsking = true, end
go g.askAboutWaiting(context.WithoutCancel(ctx))
g.askGoroutines.Go(func() {
defer end()
g.askAboutWaiting(askCtx)
})
}
// askAboutWaiting asks GeoJS about the waiting clients, one request at a
// time, until none is left or GeoJS fails. Each answer kept is given to
// Answered, outside the lock, since Answered takes locks of its own.
// time, until none is left, GeoJS fails, or StopAsking ends ctx. Each
// answer kept is given to Answered, outside the lock, since Answered takes
// locks of its own.
func (g *GeoJS) askAboutWaiting(ctx context.Context) {
for {
clients := g.nextClients()
@@ -347,6 +376,10 @@ func (g *GeoJS) askAboutWaiting(ctx context.Context) {
}
given, err := g.request(ctx, clients)
if err != nil && ctx.Err() != nil {
continue // ended by StopAsking, which is no failure
}
kept, answered := g.keep(clients, given, err)
if g.answered != nil {
@@ -362,13 +395,13 @@ func (g *GeoJS) askAboutWaiting(ctx context.Context) {
}
// nextClients returns up to maxPerRequest of the waiting clients. When
// none is waiting, it returns none and notes that no request to GeoJS is
// under way.
// none is waiting, or StopAsking has been called, it returns none and
// notes that no request to GeoJS is under way.
func (g *GeoJS) nextClients() []netip.Prefix {
g.mu.Lock()
defer g.mu.Unlock()
if len(g.waiting) == 0 {
if len(g.waiting) == 0 || g.stopped {
g.asking = false
return nil
+38
View File
@@ -318,6 +318,44 @@ func TestCallerWhoseContextEndsEarlyDoesNotStopTheRequest(t *testing.T) {
})
}
func TestStopAskingEndsTheRequestUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
service, _, g, reports := startWithReports()
clients := newClients()
service.set(hanging)
g.LookUpWithoutWaiting(t.Context(), clients())
waitForRequests(t, service, 1)
// The request is ended, not waited out, and is no failure.
began := time.Now()
g.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
reports.wantFailures(t)
// A new client is then not asked about, and its lookup does not
// wait.
service.set(answering)
wantCountry(t, g, clients(), "")
if waited := time.Since(began); waited != 0 {
t.Errorf("the lookup returned after %s, want at once", waited)
}
waitForRequests(t, service, 1)
reports.wantFailures(t)
})
}
func TestRequestOver10SecondsIsAFailure(t *testing.T) {
t.Parallel()
+1 -1
View File
@@ -185,7 +185,7 @@ func (m *Metrics) AddBansAndClients(
ledger *bans.Ledger, limiter *ratelimit.Limiter, now func() time.Time,
) {
for _, cause := range []string{
bans.CauseLimit, bans.CauseAttack, bans.CauseAdmin,
bans.CauseLimit, bans.CauseAttack, bans.CauseAdmin, bans.CauseAbuseIPDB,
} {
m.registry.MustRegister(
prometheus.NewCounterFunc(prometheus.CounterOpts{
+194 -18
View File
@@ -11,6 +11,7 @@ import (
"net/netip"
"net/url"
"slices"
"strconv"
"sync"
"time"
@@ -23,6 +24,9 @@ const (
// AbuseIPDBURL is where clients are checked: the check endpoint of
// AbuseIPDB's API.
AbuseIPDBURL = "https://api.abuseipdb.com/api/v2/check"
// AbuseIPDBBlacklistURL is where AbuseIPDB's blacklist is fetched from:
// the blacklist endpoint of AbuseIPDB's API.
AbuseIPDBBlacklistURL = "https://api.abuseipdb.com/api/v2/blacklist"
// AbuseIPDBSource is how the request log, the alerts and the metrics
// name AbuseIPDB.
AbuseIPDBSource = "abuseipdb"
@@ -32,6 +36,8 @@ const (
var (
errNoScore = errors.New("the answer gives no abuseConfidenceScore")
errNoBlacklist = errors.New("the answer gives no data")
errNotAddress = errors.New("is not an address")
errBudgetUsedUp = errors.New(
"checks spent; none is made until the day ends at 00:00 UTC")
)
@@ -53,6 +59,13 @@ type ChecksSpent struct {
Spent int
}
// BlacklistEntry is a client on AbuseIPDB's blacklist: its address and its
// abuse confidence score.
type BlacklistEntry struct {
Addr netip.Addr
Score int64
}
// AbuseIPDBParams are what NewAbuseIPDB needs.
type AbuseIPDBParams struct {
// URL is where clients are checked, normally AbuseIPDBURL, with Key,
@@ -69,10 +82,19 @@ type AbuseIPDBParams struct {
// take (SWW_WAF_DNSBL_ABUSEIPDB_TIMEOUT_MS).
CacheTTL time.Duration
Timeout time.Duration
// BlacklistURL is where the blacklist is fetched from, normally
// AbuseIPDBBlacklistURL, with the clients scored Threshold or more
// (SWW_WAF_ABUSEIPDB_THRESHOLD), every BlacklistRefresh
// (SWW_WAF_ABUSEIPDB_BLACKLIST_REFRESH_INTERVAL_MINS). Blacklisted
// receives the clients on each blacklist fetched.
BlacklistURL string
Threshold int64
BlacklistRefresh time.Duration
Blacklisted func([]BlacklistEntry)
// Now tells the time, normally time.Now in UTC.
Now func() time.Time
// ProcessLog receives each check that fails, and why, and the day's
// budget used up.
// ProcessLog receives each check or fetch of the blacklist that fails,
// and why, and the day's budget used up.
ProcessLog *slog.Logger
// Alerts receive a source_failure alert for each.
Alerts *alerts.Queue
@@ -88,8 +110,12 @@ type AbuseIPDB struct {
// scores are by client. Each is added as it is fetched and never moved
// up, so that the one fetched longest ago is the first dropped.
scores *simplelru.LRU[netip.Prefix, Score]
// checking are the clients whose check is under way.
checking map[netip.Prefix]bool
// checking are the clients whose check is under way, each with the
// function that ends it. stopped is true once StopChecking has been
// called, and checkGoroutines waits for the goroutine of each check.
checking map[netip.Prefix]context.CancelFunc
stopped bool
checkGoroutines sync.WaitGroup
// day is the day, in UTC, of the checks spent counts.
day civil.Date
spent int
@@ -112,7 +138,7 @@ func NewAbuseIPDB(params AbuseIPDBParams) *AbuseIPDB {
params: params,
httpClient: &http.Client{},
scores: scores,
checking: map[netip.Prefix]bool{},
checking: map[netip.Prefix]context.CancelFunc{},
}
}
@@ -122,11 +148,11 @@ func NewAbuseIPDB(params AbuseIPDBParams) *AbuseIPDB {
// addresses its request comes from. A client without one is checked in
// the background, by addr, the address its request came from, if
// offender, if it has committed an offence, unless its check is under
// way, a check failed less than failureDelay ago, or the day's checks
// have used up DailyBudget; Hit never waits for a check. The check that
// uses the budget up is logged and raised as a source_failure alert. ctx
// is the context of the client's request, and a check goes on after the
// request ends.
// way, a check failed less than failureDelay ago, the day's checks have
// used up DailyBudget, or StopChecking has been called; Hit never waits
// for a check. The check that uses the budget up is logged and raised as a
// source_failure alert. ctx is the context of the client's request, and a
// check goes on after the request ends, until StopChecking.
func (a *AbuseIPDB) Hit(
ctx context.Context, client netip.Prefix, addr netip.Addr, offender bool,
) (int64, bool) {
@@ -145,14 +171,21 @@ func (a *AbuseIPDB) Hit(
a.day, a.spent = today, 0
}
check := offender && !a.checking[client] && !now.Before(a.retryAt) &&
a.spent < a.params.DailyBudget
_, checking := a.checking[client]
check := offender && !checking && !a.stopped &&
!now.Before(a.retryAt) && a.spent < a.params.DailyBudget
if check {
a.checking[client] = true
checkCtx, end := context.WithCancel(context.WithoutCancel(ctx))
a.checking[client] = end
a.checks++
a.spent++
go a.check(context.WithoutCancel(ctx), client, addr)
a.checkGoroutines.Go(func() {
defer end()
a.check(checkCtx, client, addr)
})
}
usedUp := check && a.spent == a.params.DailyBudget
@@ -167,6 +200,24 @@ func (a *AbuseIPDB) Hit(
return 0, false
}
// StopChecking ends the checks under way, and returns once their goroutines
// have. A check it ends gives no score and is no failure: it is neither
// counted, logged nor raised as an alert, and checks are not left alone
// after it. The ended check stays spent from the day's budget. After
// StopChecking, Hit checks no client.
func (a *AbuseIPDB) StopChecking() {
a.mu.Lock()
a.stopped = true
for _, end := range a.checking {
end()
}
a.mu.Unlock()
a.checkGoroutines.Wait()
}
// Checked returns how many checks were made.
func (a *AbuseIPDB) Checked() int {
a.mu.Lock()
@@ -256,10 +307,45 @@ func (a *AbuseIPDB) LoadChecksSpent(checks ChecksSpent) {
a.day, a.spent = checks.Day, checks.Spent
}
// RunBlacklist fetches AbuseIPDB's blacklist at once, and again every
// BlacklistRefresh, until ctx is done, and gives the clients on each copy
// fetched to Blacklisted. While Key is unset it does nothing. A fetch that
// fails is logged and raised as a source_failure alert, unless it was cut
// off as ctx ended.
func (a *AbuseIPDB) RunBlacklist(ctx context.Context) {
if a.params.Key == "" {
return
}
for {
listed, err := a.fetchBlacklist(ctx)
switch {
case ctx.Err() != nil:
return
case err != nil:
a.alert("fetching AbuseIPDB's blacklist failed", err)
default:
a.params.Blacklisted(listed)
}
timer := time.NewTimer(a.params.BlacklistRefresh)
select {
case <-ctx.Done():
timer.Stop()
return
case <-timer.C:
}
}
}
// check checks client with AbuseIPDB by addr, one of its addresses, keeps
// the score as client's, and notes the check as no longer under way. A
// check that fails gives no score: it is counted, logged and raised as a
// source_failure alert, and no client is checked for failureDelay.
// source_failure alert, and no client is checked for failureDelay. A check
// ended as ctx ends, by StopChecking, is no failure.
func (a *AbuseIPDB) check(
ctx context.Context,
client netip.Prefix,
@@ -267,24 +353,26 @@ func (a *AbuseIPDB) check(
) {
score, err := a.ask(ctx, addr)
now := a.params.Now()
isFailure := err != nil && ctx.Err() == nil
a.mu.Lock()
delete(a.checking, client)
if err == nil {
switch {
case err == nil:
a.scores.Add(
client,
Score{Client: client, Score: score, Fetched: now},
)
} else {
case isFailure:
a.failures++
a.retryAt = now.Add(failureDelay)
}
a.mu.Unlock()
if err != nil {
if isFailure {
a.alert("checking a client with AbuseIPDB failed", err)
}
}
@@ -344,6 +432,94 @@ func (a *AbuseIPDB) ask(
return *answer.Data.AbuseConfidenceScore, nil
}
// fetchBlacklist fetches the clients on AbuseIPDB's blacklist scored
// Threshold or more, sending the key in the header Key. An answer other
// than 200, one longer than maxListBytes or without the list, an entry
// whose address does not read, and none within fetchTimeout, fail.
func (a *AbuseIPDB) fetchBlacklist(
ctx context.Context,
) ([]BlacklistEntry, error) {
ctx, cancel := context.WithTimeout(ctx, fetchTimeout)
defer cancel()
query := url.Values{
"confidenceMinimum": {strconv.FormatInt(a.params.Threshold, 10)},
}
req, err := http.NewRequestWithContext(ctx, http.MethodGet,
a.params.BlacklistURL+"?"+query.Encode(), http.NoBody)
if err != nil {
return nil, fmt.Errorf("make the request: %w", err)
}
req.Header.Set("Key", a.params.Key)
req.Header.Set("Accept", "application/json")
res, err := a.httpClient.Do(req)
if err != nil {
return nil, fmt.Errorf("fetch the blacklist: %w", errors.Unwrap(err))
}
defer func() {
_ = res.Body.Close()
}()
if res.StatusCode != http.StatusOK {
return nil, fmt.Errorf("%w %s", errStatus, res.Status)
}
body, err := io.ReadAll(io.LimitReader(res.Body, maxListBytes+1))
if err != nil {
return nil, fmt.Errorf("read the blacklist: %w", err)
}
if len(body) > maxListBytes {
return nil, errTooLong
}
return parseBlacklist(body)
}
// parseBlacklist reads body, AbuseIPDB's answer with its blacklist.
func parseBlacklist(body []byte) ([]BlacklistEntry, error) {
var answer struct {
Data *[]struct {
IPAddress string `json:"ipAddress"`
AbuseConfidenceScore int64 `json:"abuseConfidenceScore"`
} `json:"data"`
}
err := json.Unmarshal(body, &answer)
if err != nil {
return nil, fmt.Errorf("read the blacklist: %w", err)
}
if answer.Data == nil {
return nil, errNoBlacklist
}
listed := make([]BlacklistEntry, 0, len(*answer.Data))
for i, entry := range *answer.Data {
addr, err := netip.ParseAddr(entry.IPAddress)
if err != nil || addr.Zone() != "" {
// The error leaves out what the entry holds, as it does a
// client's address.
return nil, fmt.Errorf(
"entry %d's ipAddress %w",
i+1,
errNotAddress,
)
}
listed = append(listed, BlacklistEntry{
Addr: addr.Unmap(), Score: entry.AbuseConfidenceScore,
})
}
return listed, nil
}
// alert raises a source_failure alert from AbuseIPDB with reason and err,
// and logs them.
func (a *AbuseIPDB) alert(reason string, err error) {
+37
View File
@@ -394,6 +394,43 @@ func TestCheckNotAnsweredWithinTheTimeoutFailsAndHitNeverWaits(
})
}
func TestStopCheckingEndsTheCheckUnderWayAsNoFailureAndChecksNoMore(
t *testing.T,
) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
queue := newQueue()
p := abuseIPDBParams()
p.Alerts = queue
abuseIPDB := &abuseIPDBStandIn{hanging: true}
checker := newAbuseIPDB(abuseIPDB, p)
wantScore(t, checker, suspect, true, 0, false)
synctest.Wait()
// The check is ended, not waited out, and is no failure.
began := time.Now()
checker.StopChecking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopChecking returned after %s, want at once", waited)
}
wantFailures(t, checker, 0)
if got := waiting(queue); len(got) != 0 {
t.Errorf("alerts waiting %+v, want none", got)
}
// An offender without a score is then not checked.
wantScore(t, checker, other, true, 0, false)
synctest.Wait()
wantChecked(t, abuseIPDB, suspect)
})
}
func TestKeyIsSentInTheKeyHeaderAndNeverShown(t *testing.T) {
t.Parallel()
+252
View File
@@ -0,0 +1,252 @@
package reputation_test
import (
"context"
"fmt"
"io"
"net/http"
"net/netip"
"slices"
"strings"
"sync"
"testing"
"testing/synctest"
"time"
"sneak.berlin/go/smallwebwaf/internal/alerts"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// The tests of the blacklist run in synctest bubbles, as those of the
// checks do, with AbuseIPDB a stand-in reached without the network.
// blacklistURL is where the tests fetch the blacklist from.
const blacklistURL = "https://abuseipdb.example/api/v2/blacklist"
func TestBlacklistIsFetchedAtOnceAndEveryRefresh(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
abuseIPDB := &blacklistStandIn{body: `{"meta":{},"data":[` +
`{"ipAddress":"203.0.113.9","abuseConfidenceScore":100},` +
`{"ipAddress":"::ffff:198.51.100.7","abuseConfidenceScore":95},` +
`{"ipAddress":"2001:db8::9","abuseConfidenceScore":90}]}`}
got := runBlacklist(t, abuseIPDB, key, newQueue())
want := []reputation.BlacklistEntry{
{Addr: netip.MustParseAddr("203.0.113.9"), Score: 100},
{Addr: netip.MustParseAddr("198.51.100.7"), Score: 95},
{Addr: netip.MustParseAddr("2001:db8::9"), Score: 90},
}
synctest.Wait()
got.want(t, want)
time.Sleep(time.Hour - time.Nanosecond)
synctest.Wait()
got.want(t, want)
time.Sleep(time.Nanosecond)
synctest.Wait()
got.want(t, want, want)
// Each fetch asks for the clients scored 90 or more, with the key
// in the header Key alone.
abuseIPDB.mu.Lock()
defer abuseIPDB.mu.Unlock()
for _, req := range abuseIPDB.asked {
if req.URL.String() != blacklistURL+"?confidenceMinimum=90" ||
req.Header.Get("Key") != key {
t.Errorf(
"asked %s with the key %q, want %s?confidenceMinimum=90 "+
"with %q",
req.URL,
req.Header.Get("Key"),
blacklistURL,
key,
)
}
}
})
}
func TestFailedBlacklistFetchIsAlertedAndTriedAgainAtTheNextRefresh(
t *testing.T,
) {
t.Parallel()
for _, tc := range []struct{ name, body, error string }{
{
"a refusal", "",
"the server answered 429 Too Many Requests",
},
{
"an answer without the list", `{"errors":[]}`,
"the answer gives no data",
},
{
"an entry that is not an address",
`{"data":[{"ipAddress":"203.0.113.9"},{"ipAddress":"example"}]}`,
"entry 2's ipAddress is not an address",
},
} {
t.Run(tc.name, func(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
abuseIPDB := &blacklistStandIn{body: tc.body}
if tc.body == "" {
abuseIPDB.status = http.StatusTooManyRequests
}
queue := newQueue()
got := runBlacklist(t, abuseIPDB, key, queue)
synctest.Wait()
got.want(t)
alerted := waiting(queue)
if len(alerted) != 1 ||
alerted[0].Event != alerts.EventSourceFailure ||
alerted[0].Reason != "fetching AbuseIPDB's blacklist failed" ||
alerted[0].Detail["source"] != reputation.AbuseIPDBSource ||
alerted[0].Detail["error"] != tc.error {
t.Errorf(
"alerts %+v, want the failure %q",
alerted,
tc.error,
)
}
abuseIPDB.answer(`{"data":[]}`)
time.Sleep(time.Hour)
synctest.Wait()
got.want(t, []reputation.BlacklistEntry{})
})
})
}
}
func TestBlacklistIsNotFetchedWithoutAKey(t *testing.T) {
t.Parallel()
synctest.Test(t, func(t *testing.T) {
abuseIPDB := &blacklistStandIn{body: `{"data":[]}`}
got := runBlacklist(t, abuseIPDB, "", newQueue())
time.Sleep(time.Hour)
synctest.Wait()
got.want(t)
if len(abuseIPDB.asked) != 0 {
t.Errorf("fetched the blacklist %d times, want none",
len(abuseIPDB.asked))
}
})
}
// blacklistStandIn is a stand-in for AbuseIPDB that answers each fetch of
// the blacklist with status, 200 when it is zero, and body, and keeps the
// requests.
type blacklistStandIn struct {
mu sync.Mutex
status int
body string
asked []*http.Request
}
// RoundTrip has the stand-in answer req, in place of the network.
func (s *blacklistStandIn) RoundTrip(
req *http.Request,
) (*http.Response, error) {
s.mu.Lock()
s.asked = append(s.asked, req)
status, body := s.status, s.body
s.mu.Unlock()
if status == 0 {
status = http.StatusOK
}
return &http.Response{
StatusCode: status,
Status: fmt.Sprintf("%d %s", status, http.StatusText(status)),
Header: http.Header{},
Body: io.NopCloser(strings.NewReader(body)),
Request: req,
}, nil
}
// answer has the stand-in answer each fetch with 200 and body.
func (s *blacklistStandIn) answer(body string) {
s.mu.Lock()
defer s.mu.Unlock()
s.status, s.body = 0, body
}
// blacklisted holds the clients on each blacklist given to Blacklisted.
type blacklisted struct {
mu sync.Mutex
fetched [][]reputation.BlacklistEntry
}
// want checks the clients on each blacklist given so far.
func (b *blacklisted) want(
t *testing.T,
want ...[]reputation.BlacklistEntry,
) {
t.Helper()
b.mu.Lock()
defer b.mu.Unlock()
if !slices.EqualFunc(b.fetched, want, slices.Equal) {
t.Errorf("blacklists %v, want %v", b.fetched, want)
}
}
// runBlacklist runs RunBlacklist, until the test ends, with the key
// accountKey, the threshold 90 and a refresh of an hour, fetching from
// abuseIPDB and raising alerts into queue, and returns what it gives
// Blacklisted.
func runBlacklist(
t *testing.T, abuseIPDB *blacklistStandIn, accountKey string,
queue *alerts.Queue,
) *blacklisted {
t.Helper()
got := &blacklisted{}
p := abuseIPDBParams()
p.Key = accountKey
p.BlacklistURL = blacklistURL
p.Threshold = 90
p.BlacklistRefresh = time.Hour
p.Alerts = queue
p.Blacklisted = func(listed []reputation.BlacklistEntry) {
got.mu.Lock()
defer got.mu.Unlock()
got.fetched = append(got.fetched, listed)
}
checker := reputation.NewAbuseIPDB(p)
checker.SetTransport(abuseIPDB)
ctx, cancel := context.WithCancel(t.Context())
done := make(chan struct{})
go func() {
checker.RunBlacklist(ctx)
close(done)
}()
t.Cleanup(func() {
cancel()
<-done
})
return got
}
+44 -13
View File
@@ -82,8 +82,12 @@ type DNSBL struct {
// verdicts are by query. Each is added as it is fetched and never moved
// up, so that the one fetched longest ago is the first dropped.
verdicts *simplelru.LRU[query, Verdict]
// asking are the queries under way.
asking map[query]bool
// asking are the queries under way, each with the function that ends
// it. stopped is true once StopAsking has been called, and
// queryGoroutines waits for the goroutine of each query.
asking map[query]context.CancelFunc
stopped bool
queryGoroutines sync.WaitGroup
// queries and failures count, by zone, the queries made and those that
// failed, and retryAt is when a zone whose last query failed may be
// asked again.
@@ -120,7 +124,7 @@ func NewDNSBL(params DNSBLParams) *DNSBL {
params: params,
resolver: resolver,
verdicts: verdicts,
asking: map[query]bool{},
asking: map[query]context.CancelFunc{},
queries: map[string]int{},
failures: map[string]int{},
retryAt: map[string]time.Time{},
@@ -138,9 +142,10 @@ func (d *DNSBL) Zones() []string {
// log, the alerts and the metrics. A verdict is used until CacheTTL has
// passed since it was fetched. Each zone without one is asked about addr
// in the background, unless a query about addr to it is under way, the
// zone is left alone after a failure, or maxQueries are under way;
// ListedBy never waits for a query. ctx is the context of the client's
// request, and a query goes on after the request ends.
// zone is left alone after a failure, maxQueries are under way, or
// StopAsking has been called; ListedBy never waits for a query. ctx is the
// context of the client's request, and a query goes on after the request
// ends, until StopAsking.
func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string {
d.mu.Lock()
defer d.mu.Unlock()
@@ -153,23 +158,47 @@ func (d *DNSBL) ListedBy(ctx context.Context, addr netip.Addr) []string {
q := query{zone: zone, client: addr}
kept, found := d.verdicts.Peek(q)
_, asking := d.asking[q]
switch {
case found && now.Sub(kept.Fetched) < d.params.CacheTTL:
if kept.Listed {
listedBy = append(listedBy, config.MaskZoneKey(zone))
}
case !d.asking[q] && !now.Before(d.retryAt[zone]) && len(d.asking) < maxQueries:
d.asking[q] = true
case !asking && !d.stopped && !now.Before(d.retryAt[zone]) &&
len(d.asking) < maxQueries:
queryCtx, end := context.WithCancel(context.WithoutCancel(ctx))
d.asking[q] = end
d.queries[zone]++
go d.ask(context.WithoutCancel(ctx), q)
d.queryGoroutines.Go(func() {
defer end()
d.ask(queryCtx, q)
})
}
}
return listedBy
}
// StopAsking ends the queries under way, and returns once their
// goroutines have. A query it ends gives no verdict and is no failure: it
// is neither counted, logged nor raised as an alert, and the zone is not
// left alone after it. After StopAsking, ListedBy asks no zone.
func (d *DNSBL) StopAsking() {
d.mu.Lock()
d.stopped = true
for _, end := range d.asking {
end()
}
d.mu.Unlock()
d.queryGoroutines.Wait()
}
// Queries returns how many queries were made to zone.
func (d *DNSBL) Queries(zone string) int {
d.mu.Lock()
@@ -238,27 +267,29 @@ func (d *DNSBL) Load(verdicts []Verdict) {
// query as no longer under way. A query that fails gives no verdict: it
// is counted, logged and raised as a source_failure alert, which show the
// zone with its key masked, and the zone is not asked again for
// failureDelay.
// failureDelay. A query ended as ctx ends, by StopAsking, is no failure.
func (d *DNSBL) ask(ctx context.Context, q query) {
listed, err := d.lookUp(ctx, q)
now := d.params.Now()
isFailure := err != nil && ctx.Err() == nil
d.mu.Lock()
delete(d.asking, q)
if err == nil {
switch {
case err == nil:
d.verdicts.Add(q, Verdict{
Zone: q.zone, Client: q.client, Listed: listed, Fetched: now,
})
} else {
case isFailure:
d.failures[q.zone]++
d.retryAt[q.zone] = now.Add(failureDelay)
}
d.mu.Unlock()
if err != nil {
if isFailure {
const failed = "asking a DNSBL zone failed"
shown := config.MaskZoneKey(q.zone)
+39
View File
@@ -210,6 +210,45 @@ func TestQueryNotAnsweredWithinTheTimeoutFails(t *testing.T) {
})
}
//
//nolint:paralleltest // one at a time, as the comment at the top of this file says
func TestStopAskingEndsTheQueryUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
synctest.Test(t, func(t *testing.T) {
queue := newQueue()
p := dnsblParams(zone)
p.Alerts = queue
resolver := &resolverStandIn{hanging: true}
dnsbl := newDNSBL(resolver, p)
wantZones(t, dnsbl, listed)
synctest.Wait()
// The query is ended, not waited out, and is no failure.
began := time.Now()
dnsbl.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
wantQueries(t, dnsbl, 1, 0)
if got := waiting(queue); len(got) != 0 {
t.Errorf("alerts waiting %+v, want none", got)
}
// A client without a verdict is then asked about in no zone.
wantZones(t, dnsbl, unlisted)
synctest.Wait()
wantQueries(t, dnsbl, 1, 0)
wantAsked(t, resolver, listedName)
waitForTheResolver()
})
}
//
//nolint:paralleltest // one at a time, as the comment at the top of this file says
func TestZoneThatFailsOrRefusesGivesNoVerdictAndIsLeftAloneForAMinute(
+2 -1
View File
@@ -7,7 +7,8 @@
// SWW_WAF_DNSBL_ZONES about clients, and keeps their verdicts, and checks
// clients with AbuseIPDB, and keeps their scores and the checks spent
// today. The state package writes all of these to files and reads them
// from there, so that a restart keeps them too.
// from there, so that a restart keeps them too. Last, it fetches
// AbuseIPDB's blacklist, which it does not keep.
package reputation
import (
+43 -12
View File
@@ -99,8 +99,12 @@ type Client struct {
// answers are by client. Each is added as it comes and never moved up,
// so that the one that came longest ago is the first dropped.
answers *simplelru.LRU[netip.Prefix, Answer]
// asking are the clients whose query is under way.
asking map[netip.Prefix]bool
// asking are the clients whose query is under way, each with the
// function that ends it. stopped is true once StopAsking has been
// called, and queryGoroutines waits for the goroutine of each query.
asking map[netip.Prefix]context.CancelFunc
stopped bool
queryGoroutines sync.WaitGroup
// retryAt is when routewatch may be asked again after a query failed.
retryAt time.Time
}
@@ -116,7 +120,7 @@ func New(params Params) *Client {
params: params,
httpClient: &http.Client{},
answers: answers,
asking: map[netip.Prefix]bool{},
asking: map[netip.Prefix]context.CancelFunc{},
}
}
@@ -124,8 +128,9 @@ func New(params Params) *Client {
// IPv6 group, or why it has no route. It never waits for a query. A client
// without an answer is asked about in the background, by addr, the address its
// request came from, unless its query is under way, a query failed less than
// failureKept ago, or maxQueries are under way. ctx is the context of the
// client's request, and a query goes on after the request ends.
// failureKept ago, maxQueries are under way, or StopAsking has been called. ctx
// is the context of the client's request, and a query goes on after the request
// ends, until StopAsking.
func (c *Client) Route(
ctx context.Context, client netip.Prefix, addr netip.Addr,
) (Route, Missing) {
@@ -147,15 +152,38 @@ func (c *Client) Route(
return Route{}, RequestFailed
}
if !c.asking[client] && len(c.asking) < maxQueries {
c.asking[client] = true
_, asking := c.asking[client]
if !asking && !c.stopped && len(c.asking) < maxQueries {
queryCtx, end := context.WithCancel(context.WithoutCancel(ctx))
c.asking[client] = end
go c.ask(context.WithoutCancel(ctx), client, addr)
c.queryGoroutines.Go(func() {
defer end()
c.ask(queryCtx, client, addr)
})
}
return Route{}, NoAnswerYet
}
// StopAsking ends the queries under way, and returns once their goroutines
// have. A query it ends gives no answer and is no failure: it is not logged,
// and routewatch is not left alone after it. After StopAsking, Route asks
// routewatch nothing.
func (c *Client) StopAsking() {
c.mu.Lock()
c.stopped = true
for _, end := range c.asking {
end()
}
c.mu.Unlock()
c.queryGoroutines.Wait()
}
// Snapshot returns every answer still in use, sorted by client, as
// routewatch.json lists them.
func (c *Client) Snapshot() []Answer {
@@ -205,7 +233,8 @@ func (c *Client) Load(answers []Answer) {
// ask asks routewatch about addr, keeps the answer as client's, and notes the
// query as no longer under way. A query that fails gives no answer, and
// routewatch is not asked again for failureKept. Only the first failure of
// those under way is logged.
// those under way is logged. A query ended as ctx ends, by StopAsking, is no
// failure.
func (c *Client) ask(
ctx context.Context,
client netip.Prefix,
@@ -213,18 +242,20 @@ func (c *Client) ask(
) {
route, err := c.query(ctx, addr)
now := c.params.Now()
isFailure := err != nil && ctx.Err() == nil
c.mu.Lock()
delete(c.asking, client)
firstFailure := err != nil && !now.Before(c.retryAt)
firstFailure := isFailure && !now.Before(c.retryAt)
if err == nil {
switch {
case err == nil:
c.answers.Add(client, Answer{
Client: client, Netblock: route.Netblock, ASN: route.ASN, Answered: now,
})
} else {
case isFailure:
c.retryAt = now.Add(failureKept)
}
+48
View File
@@ -361,6 +361,54 @@ func TestHangingRoutewatchNeverDelaysAndFailsTheQuery(t *testing.T) {
})
}
func TestStopAskingEndsTheQueryUnderWayAsNoFailureAndAsksNoMore(
t *testing.T,
) {
t.Parallel()
// In a synctest bubble, as TestHangingRoutewatchNeverDelaysAndFailsTheQuery
// says.
synctest.Test(t, func(t *testing.T) {
f := &fixture{t: t, log: &syncBuffer{}}
f.client = routewatch.New(routewatch.Params{
URL: silentURL, Now: time.Now,
ProcessLog: slog.New(slog.NewTextHandler(f.log, nil)),
})
f.route()
synctest.Wait()
// The query is ended, not waited out.
began := time.Now()
f.client.StopAsking()
if waited := time.Since(began); waited != 0 {
t.Errorf("StopAsking returned after %s, want at once", waited)
}
// A query started now would fail within waitLimit. None is, and the
// one ended is no failure: nothing is logged, and routewatch is not
// left alone.
for range 2 {
if _, missing := f.route(); missing != routewatch.NoAnswerYet {
t.Errorf(
"Route gave %q, want %q",
missing,
routewatch.NoAnswerYet,
)
}
time.Sleep(waitLimit)
synctest.Wait()
}
if f.log.String() != "" {
t.Errorf("process log %q, want nothing", f.log.String())
}
})
}
func TestRepeatedRequestsMakeOneQueryAndTheAnswerExpires(t *testing.T) {
t.Parallel()
+6
View File
@@ -2,6 +2,12 @@ package rproxy
import "time"
// StopBreakerClock has the circuit breaker of s read at as the time, so that how
// long requests take cannot matter to it. It is called before s serves.
func (s *Server) StopBreakerClock(at time.Time) {
s.h.breakerClock = func() time.Time { return at }
}
// Breaker is the circuit breaker, for tests that give it the time.
type Breaker struct {
b breaker
+8 -13
View File
@@ -20,7 +20,6 @@ import (
"net/url"
"slices"
"strings"
"sync"
"time"
"sneak.berlin/go/smallwebwaf/internal/config"
@@ -94,6 +93,7 @@ func New(params Params) *Server {
reportURL: (&url.URL{
Scheme: backend.Scheme, Host: backend.Host, Path: waf.ReportPath,
}).String(),
breakerClock: time.Now,
}
return &Server{
@@ -113,11 +113,7 @@ func New(params Params) *Server {
// which SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS bounds. Any report after this call
// is dropped: that of a WebSocket that closes while rproxy stops, for one.
func (s *Server) WaitForReports() {
s.h.reportsMu.Lock()
s.h.reportsStopped = true
s.h.reportsMu.Unlock()
s.h.reports.Wait()
s.h.reports.stopAndWait()
}
// handler is the proxy. It holds what every request shares; what belongs to
@@ -133,13 +129,12 @@ type handler struct {
wafTransport http.RoundTripper
// reportURL is where the reports go.
reportURL string
// breaker is the circuit breaker for asks to waf.
breaker breaker
// reports waits for the reports being sent. reportsMu guards starting one
// against reportsStopped, which is set once nothing is to wait for another.
reports sync.WaitGroup
reportsMu sync.Mutex
reportsStopped bool
// breaker is the circuit breaker for asks to waf, and breakerClock gives it
// the time.
breaker breaker
breakerClock func() time.Time
// reports are the goroutines sending reports to waf.
reports reportGoroutines
}
// newTransport returns what carries requests to the app. It never goes through
+27 -5
View File
@@ -356,6 +356,19 @@ func startServerLogging(
) (string, *rproxy.Server) {
t.Helper()
server := newServer(t, backend, appURL, env, requestLog, processLog)
return serve(t, server), server
}
// newServer returns rproxy, not yet serving, with its request lines going to
// requestLog and its process lines to processLog.
func newServer(
t *testing.T, backend, appURL string, env map[string]string,
requestLog, processLog io.Writer,
) *rproxy.Server {
t.Helper()
settings := map[string]string{
"SWW_RPROXY_WAF_BACKEND": backend, "SWW_RPROXY_UPSTREAM_URL": appURL,
wafBackendTimeout: "60000",
@@ -367,7 +380,7 @@ func startServerLogging(
t.Fatalf("settings %v: %v", settings, err)
}
server := rproxy.New(rproxy.Params{
return rproxy.New(rproxy.Params{
Config: cfg,
RequestLog: requestLog,
ProcessLog: requestlog.NewProcessLogger(
@@ -376,6 +389,11 @@ func startServerLogging(
slog.LevelInfo,
),
})
}
// serve has server serve until the test ends, and returns its address.
func serve(t *testing.T, server *rproxy.Server) string {
t.Helper()
listener, err := (&net.ListenConfig{}).Listen(
t.Context(),
@@ -396,7 +414,7 @@ func startServerLogging(
server.WaitForReports()
})
return listener.Addr().String(), server
return listener.Addr().String()
}
// answered is the visitor's answer.
@@ -1532,9 +1550,13 @@ func TestAnswersThatCannotBePassedOnOpenTheBreaker(t *testing.T) {
tooLarge(w, r)
})
app := startApp(t, greet)
addr, out := startRProxy(t, standIn.URL, app.URL, map[string]string{
wafBackendTimeout: "60000",
})
out := &output{}
server := newServer(t, standIn.URL, app.URL, nil, out, out)
// The breaker's clock stands still. On a slow host, the five failures could
// otherwise take more than the five seconds that open the breaker. The next
// request could come more than a second later, when it may ask waf again.
server.StopBreakerClock(time.Now())
addr := serve(t, server)
for range 5 {
if got := get(t, addr, "/"); got.status != http.StatusBadGateway {
+35 -11
View File
@@ -10,7 +10,7 @@ import (
"maps"
"net/http"
"strings"
"time"
"sync"
"sneak.berlin/go/smallwebwaf/internal/waf"
)
@@ -97,7 +97,7 @@ func (rq *request) askUnlessBreakerOpen(
ctx context.Context,
) (*wafAnswer, error) {
b := &rq.h.breaker
if !b.mayAsk(time.Now()) {
if !b.mayAsk(rq.h.breakerClock()) {
return nil, errBreakerOpen
}
@@ -107,7 +107,7 @@ func (rq *request) askUnlessBreakerOpen(
case err == nil:
b.noteAnswer()
case ctx.Err() == nil:
b.noteFailure(time.Now())
b.noteFailure(rq.h.breakerClock())
}
return answer, err
@@ -254,14 +254,7 @@ func (rq *request) answerWith(answer *wafAnswer) {
// visitor does not wait for it. The report goes on after ctx, the request's own
// context, has ended.
func (h *handler) sendReport(ctx context.Context, report *waf.Report) {
h.reportsMu.Lock()
defer h.reportsMu.Unlock()
if h.reportsStopped {
return
}
h.reports.Go(func() {
h.reports.startUnlessStopped(func() {
err := h.postReport(context.WithoutCancel(ctx), report)
if err != nil {
h.processLog.Warn("a report is dropped", "error", err.Error())
@@ -269,6 +262,37 @@ func (h *handler) sendReport(ctx context.Context, report *waf.Report) {
})
}
// reportGoroutines are the goroutines sending reports to waf. None starts once
// stopAndWait has been called.
type reportGoroutines struct {
mu sync.Mutex
stopped bool
running sync.WaitGroup
}
// startUnlessStopped runs send on a goroutine of its own, or drops it once
// stopAndWait has been called.
func (g *reportGoroutines) startUnlessStopped(send func()) {
g.mu.Lock()
defer g.mu.Unlock()
if g.stopped {
return
}
g.running.Go(send)
}
// stopAndWait stops any more goroutines from starting, and returns once those
// running have ended.
func (g *reportGoroutines) stopAndWait() {
g.mu.Lock()
g.stopped = true
g.mu.Unlock()
g.running.Wait()
}
// postReport posts report to waf, and waits for its answer for up to
// SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS.
func (h *handler) postReport(ctx context.Context, report *waf.Report) error {
+6 -3
View File
@@ -104,7 +104,7 @@ var (
errVersion = errors.New("unknown version")
// errMissing is for an entry without a field it needs.
errMissing = errors.New("has no")
errCause = errors.New("is not limit, attack or admin")
errCause = errors.New("is not limit, attack, admin or abuseipdb")
errExpires = errors.New("is not after its start")
errDestination = errors.New("is not webhook, slack or ntfy")
errScope = errors.New(
@@ -638,6 +638,8 @@ func (f *Files) takeInState(
f.params.Ledger.Load(held)
}
f.params.Ledger.ForgetEndedAbuseIPDBBans(f.params.Now())
entries = len(held)
case clientsJSON:
var file clientsFile
@@ -967,7 +969,7 @@ func (e BanEntry) ban() bans.Ban {
// each expires is read again as written. An expires not after the start
// is refused too, since the netblock's next ban for a broken limit, three
// times as long as this one, would then refuse nothing; and so is a cause
// other than limit, attack or admin, most likely misspelt.
// other than limit, attack, admin or abuseipdb, most likely misspelt.
func (f *bansFile) check(data []byte) error {
var written struct {
Bans []struct {
@@ -991,7 +993,8 @@ func (f *bansFile) check(data []byte) error {
case entry.Expires != nil && !entry.Expires.After(entry.Start):
return fmt.Errorf("entry %d's expires %w", i+1, errExpires)
case entry.Cause != "" && entry.Cause != bans.CauseLimit &&
entry.Cause != bans.CauseAttack && entry.Cause != bans.CauseAdmin:
entry.Cause != bans.CauseAttack && entry.Cause != bans.CauseAdmin &&
entry.Cause != bans.CauseAbuseIPDB:
return fmt.Errorf(
"entry %d's cause %q %w",
i+1,
+36 -2
View File
@@ -114,7 +114,8 @@ const permanentBansJSON = `{
"earlier_bans": {
"limit": 3,
"attack": 1,
"admin": 1
"admin": 1,
"abuseipdb": 0
}
}
}
@@ -1190,7 +1191,7 @@ func TestBanWithAnotherCauseStopsTheStart(t *testing.T) {
`"expires": "2026-10-06T04:00:00Z", "cause": "limit"}, `+
`{"netblock": "203.0.113.12/32", "start": "2026-10-06T00:00:00Z", `+
`"expires": null, "cause": "atack"}]}`,
`: entry 4's cause "atack" is not limit, attack or admin`)
`: entry 4's cause "atack" is not limit, attack, admin or abuseipdb`)
}
func TestBanThatDoesNotEndAfterItsStartStopsTheStart(t *testing.T) {
@@ -2090,6 +2091,39 @@ func TestLiftedBanReadAtTheStart(t *testing.T) {
wantLiftedBanKept(t, load(t, params), dir, params.Ledger)
}
func TestEndedAbuseIPDBBanForgottenWhenBansJSONIsReadAtTheStart(
t *testing.T,
) {
t.Parallel()
ended := netip.MustParsePrefix("203.0.113.9/32")
lasting := netip.MustParsePrefix("203.0.113.10/32")
limited := netip.MustParsePrefix("203.0.113.11/32")
// At midnight, the start's time, the first ban has ended and the second
// lasts. The third has ended too, but is for a limit.
dir := t.TempDir()
edit(t, dir, bansJSON, `{"version": 1, "bans": [`+
`{"netblock": "203.0.113.9/32", "start": "2026-09-06T00:00:00Z", `+
`"expires": "2026-10-06T00:00:00Z", "cause": "abuseipdb"}, `+
`{"netblock": "203.0.113.10/32", "start": "2026-09-07T00:00:00Z", `+
`"expires": "2026-10-07T00:00:00Z", "cause": "abuseipdb"}, `+
`{"netblock": "203.0.113.11/32", "start": "2026-10-05T00:00:00Z", `+
`"expires": "2026-10-05T01:00:00Z", "cause": "limit"}]}`)
params := newParams(dir)
load(t, params)
for netblock, want := range map[netip.Prefix]int{
ended: 0, lasting: 1, limited: 1,
} {
if got := len(params.Ledger.Bans(netblock)); got != want {
t.Errorf("the ledger holds %d bans on %s, want %d",
got, netblock, want)
}
}
}
func TestBanLiftedByAnEditWhileRunning(t *testing.T) {
t.Parallel()
+4 -7
View File
@@ -755,8 +755,7 @@ func TestRProxyStoppingWaitsForAReportBeingSent(t *testing.T) {
}
}
// sendAndKeepOpen sends request to rproxy at addr, and returns the connection. A
// read from it ends with an error once waitLimit is up.
// sendAndKeepOpen sends request to rproxy at addr, and returns the connection.
func sendAndKeepOpen(t *testing.T, addr, request string) net.Conn {
t.Helper()
@@ -769,11 +768,6 @@ func sendAndKeepOpen(t *testing.T, addr, request string) net.Conn {
_ = conn.Close()
})
err = conn.SetDeadline(time.Now().Add(waitLimit))
if err != nil {
t.Fatalf("set the deadline: %v", err)
}
_, err = io.WriteString(conn, request)
if err != nil {
t.Fatalf("send: %v", err)
@@ -838,6 +832,9 @@ func TestRProxyStoppingCutsOffARequestAfterFiveSeconds(t *testing.T) {
stop()
// Counted from the stop, so a slow wait for the app cannot shorten it.
_ = conn.SetReadDeadline(stopped.Add(cutOffAfter + waitLimit))
text, err := io.ReadAll(conn)
if err != nil || len(text) != 0 {
t.Errorf("read %q (%v), want the connection cut off", text, err)
+3 -1
View File
@@ -660,7 +660,9 @@ func TestCoreRuleSetExclusionsFileThatCannotBeUsedStopsTheStartWhileTheCoreRuleS
status := run(t.Context(), map[string]string{
listenAddr: localhost + ":0", stateDir: t.TempDir(), ruleFilesDir: t.TempDir(),
"SWW_WAF_CORE_RULE_SET_MODE": config.CoreRuleSetModeOff,
"SWW_WAF_CORE_RULE_SET_MODE": string(
config.CoreRuleSetModeOff,
),
"SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE": path,
}, out)
if status != 1 {
+91 -27
View File
@@ -2,6 +2,7 @@ package sww
import (
"context"
"fmt"
"io"
"log/slog"
"net"
@@ -117,7 +118,8 @@ func RunWAF(ctx context.Context, params Params) int {
"settings", cfg)
// The last write follows the stop of every hook, and so the end of every
// loop that changes the state or raises an alert. A hook of the state
// loop that changes the state or raises an alert, and of every ask of
// GeoJS, the DNSBL zones, AbuseIPDB and routewatch. A hook of the state
// files would stop before the loops of the parts built ahead of them.
return run(ctx, app, failed, processLog, func() error {
err := files.WriteAll()
@@ -175,11 +177,35 @@ func newRuleFiles(
return ruleFiles, nil
}
// newCoreRuleSet returns the Core Rule Set, as waf.NewCoreRuleSet does.
// newCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
// without the rules SWW_WAF_CORE_RULE_SET_DISABLED_RULES switches off, reading bodies
// up to SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE, with the exclusions in
// SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE and the fixes of the apps in SWW_WAF_APPS,
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. An exclusions file that
// coreruleset.New refuses is an error in every mode. While the mode is off, a
// set file is loaded with the Core Rule Set only to check it.
func newCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
crs, err := waf.NewCoreRuleSet(cfg)
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff &&
cfg.CoreRuleSetExclusionsFile == "" {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
crs, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil {
return nil, startError{"cannot use the Core Rule Set", err}
return nil, startError{
"cannot use the Core Rule Set",
fmt.Errorf("SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE: %w", err),
}
}
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
return crs, nil
@@ -192,7 +218,7 @@ func newLookupFile(
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) (*lookup.File, error) {
if cfg.LookupSource != "file" {
if cfg.LookupSource != config.LookupSourceFile {
return nil, nil //nolint:nilnil // no lookup database, and no error
}
@@ -272,11 +298,13 @@ func newLists(
return lists
}
// newDNSBL returns what asks the DNSBL zones, none asked yet.
// newDNSBL returns what asks the DNSBL zones, none asked yet. At the stop it
// ends the queries under way, as reputation.DNSBL.StopAsking says.
func newDNSBL(
cfg *config.WAF, processLog *slog.Logger, alertQueue *alerts.Queue,
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue,
) *reputation.DNSBL {
return reputation.NewDNSBL(reputation.DNSBLParams{
dnsbl := reputation.NewDNSBL(reputation.DNSBLParams{
Zones: cfg.DNSBLZones,
Resolver: cfg.DNSBLResolver,
CacheTTL: cfg.IPReputationCacheTTL,
@@ -285,40 +313,66 @@ func newDNSBL(
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(fx.StopHook(dnsbl.StopAsking))
return dnsbl
}
// newAbuseIPDB returns what checks clients with AbuseIPDB while
// SWW_WAF_ABUSEIPDB_KEY is set, none checked yet.
// SWW_WAF_ABUSEIPDB_KEY is set, none checked yet. Until waf stops, it
// fetches AbuseIPDB's blacklist as it is due, and bans the clients on it in
// ledger, as waf.BanAbuseIPDBBlacklist says. At the stop it ends the checks
// under way, as reputation.AbuseIPDB.StopChecking says.
func newAbuseIPDB(
cfg *config.WAF, processLog *slog.Logger, alertQueue *alerts.Queue,
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
alertQueue *alerts.Queue, ledger *bans.Ledger,
) *reputation.AbuseIPDB {
return reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: reputation.AbuseIPDBURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
abuseIPDB := reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: reputation.AbuseIPDBURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: reputation.AbuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, utcNow(), listed,
)
},
Now: utcNow,
ProcessLog: processLog,
Alerts: alertQueue,
})
lc.Append(background(abuseIPDB.RunBlacklist))
lc.Append(fx.StopHook(abuseIPDB.StopChecking))
return abuseIPDB
}
// newRouteWatch returns what asks routewatch about clients, or nil while
// SWW_WAF_ROUTEWATCH_URL is unset.
// SWW_WAF_ROUTEWATCH_URL is unset. At the stop it ends the queries under
// way, as routewatch.Client.StopAsking says.
func newRouteWatch(
cfg *config.WAF, processLog *slog.Logger,
lc fx.Lifecycle, cfg *config.WAF, processLog *slog.Logger,
) *routewatch.Client {
if cfg.RouteWatchURL == "" {
return nil
}
return routewatch.New(routewatch.Params{
routeWatch := routewatch.New(routewatch.Params{
URL: cfg.RouteWatchURL,
Now: utcNow,
ProcessLog: processLog,
})
lc.Append(fx.StopHook(routeWatch.StopAsking))
return routeWatch
}
// newMetrics returns the metrics, with those read from the other parts as
@@ -356,12 +410,18 @@ func newMetrics(
// newGeoJS returns what looks clients up at GeoJS, none looked up yet. Each
// answer goes to the limiter and the ledger, as waf.AddLookup says, and each
// failure is handled as waf.GeoJSFailed says.
// failure is handled as waf.GeoJSFailed says. At the stop it ends the request
// under way, as geojs.GeoJS.StopAsking says.
func newGeoJS(
cfg *config.WAF, m *metrics.Metrics, limiter *ratelimit.Limiter,
ledger *bans.Ledger, alertQueue *alerts.Queue, processLog *slog.Logger,
lc fx.Lifecycle,
cfg *config.WAF,
m *metrics.Metrics,
limiter *ratelimit.Limiter,
ledger *bans.Ledger,
alertQueue *alerts.Queue,
processLog *slog.Logger,
) *geojs.GeoJS {
return geojs.New(geojs.Params{
geoJS := geojs.New(geojs.Params{
URL: geojs.URL,
Answered: func(answer geojs.Answer) {
waf.AddLookup(cfg, limiter, ledger, answer)
@@ -373,6 +433,10 @@ func newGeoJS(
},
WentWithoutAnswer: m.RequestsWithoutGeoJSAnswer.Inc,
})
lc.Append(fx.StopHook(geoJS.StopAsking))
return geoJS
}
// newWAFServer returns the server waf runs, with its parts and the time
+1 -1
View File
@@ -54,7 +54,7 @@ func (abuseIPDB) check(
"scored by AbuseIPDB at or over SWW_WAF_ABUSEIPDB_MIN_SCORE",
)
if rq.h.config.DNSBLAbuseIPDBAction != deny {
if rq.h.config.DNSBLAbuseIPDBAction != config.ReputationActionDeny {
return nil
}
+46
View File
@@ -0,0 +1,46 @@
package waf
// The bans for AbuseIPDB's blacklist. They read SWW_WAF_ABUSEIPDB_BAN_DAYS and
// SWW_WAF_MODE; the blacklist is fetched by the reputation package.
import (
"log/slog"
"net/netip"
"time"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/reputation"
)
// BanAbuseIPDBBlacklist bans in ledger the netblock of each client on
// AbuseIPDB's blacklist, listed, for SWW_WAF_ABUSEIPDB_BAN_DAYS from now, as
// the ledger's BanForAbuseIPDB describes. It logs to processLog how many
// clients were listed and how many bans were made. Clients in one netblock
// make one ban, with the highest of their scores. In observe mode it makes
// no ban.
func BanAbuseIPDBBlacklist(
cfg *config.WAF, ledger *bans.Ledger, processLog *slog.Logger,
now time.Time, listed []reputation.BlacklistEntry,
) {
scores := make(map[netip.Prefix]int64, len(listed))
for _, client := range listed {
netblock := banNetblock(cfg, client.Addr)
scores[netblock] = max(scores[netblock], client.Score)
}
made := 0
if !cfg.Observe {
made = ledger.BanForAbuseIPDB(
now, now.Add(cfg.AbuseIPDBBanDuration), scores,
)
}
processLog.Info(
"fetched AbuseIPDB's blacklist",
"clients", len(listed),
"bans_made", made,
)
}
+100
View File
@@ -0,0 +1,100 @@
package waf_test
import (
"context"
"net/http"
"net/netip"
"testing"
"time"
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/reputation"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
// abuseIPDBBanDays is the setting of how long a ban for AbuseIPDB's
// blacklist lasts, in days.
const abuseIPDBBanDays = "SWW_WAF_ABUSEIPDB_BAN_DAYS"
func TestClientOnTheFetchedAbuseIPDBBlacklistIsRefused(t *testing.T) {
t.Parallel()
s, clk, server := startWithClock(t, "", map[string]string{
abuseIPDBKey: accountKey,
})
ctx, cancel := context.WithCancel(t.Context())
stopped := make(chan struct{})
go func() {
server.AbuseIPDB.RunBlacklist(ctx)
close(stopped)
}()
t.Cleanup(func() {
cancel()
<-stopped
})
waitUntil(func() bool {
active, _ := server.Ledger.Count(clk.Now())
return active == 1
})
s.get(client, http.StatusForbidden, requestlog.ActionTemporarilyBanned)
s.get(otherClient, http.StatusOK, requestlog.ActionForward)
}
func TestClientsOnTheAbuseIPDBBlacklistAreBannedForTheBanDays(t *testing.T) {
t.Parallel()
s, clk, server := startWithClock(t, "", map[string]string{
abuseIPDBBanDays: "2", banScopeV4Prefix: "24",
})
// Two clients in one netblock make one ban, with the higher score.
server.BanAbuseIPDBBlacklist([]reputation.BlacklistEntry{
{Addr: netip.MustParseAddr(client), Score: 95},
{Addr: netip.MustParseAddr(otherClient), Score: 100},
{Addr: netip.MustParseAddr("2001:db8:5::1"), Score: 90},
})
held := server.Ledger.Bans(netip.MustParsePrefix(clientsNet))
if len(held) != 1 || held[0].Cause != bans.CauseAbuseIPDB ||
*held[0].Notes.Reputation[0].Score != 100 {
t.Errorf("bans on %s %+v, want one for the blacklist, with 100",
clientsNet, held)
}
// Every client of a banned netblock is refused, the IPv6 address's /64
// included.
for _, from := range []string{"203.0.113.200", "2001:db8:5::ffff:1"} {
s.get(from, http.StatusForbidden, requestlog.ActionTemporarilyBanned)
}
s.get("2001:db8:5:1::1", http.StatusOK, requestlog.ActionForward)
clk.advance(2 * 24 * time.Hour)
s.get(client, http.StatusOK, requestlog.ActionForward)
}
func TestAbuseIPDBBlacklistMakesNoBanInObserveMode(t *testing.T) {
t.Parallel()
s, clk, server := startWithClock(
t,
"",
map[string]string{mode: "observe"},
)
server.BanAbuseIPDBBlacklist([]reputation.BlacklistEntry{
{Addr: netip.MustParseAddr(client), Score: 100},
})
if active, _ := server.Ledger.Count(clk.Now()); active != 0 {
t.Errorf("%d bans active, want none", active)
}
s.get(client, http.StatusOK, requestlog.ActionForward)
}
+5 -4
View File
@@ -86,13 +86,14 @@ func (rq *request) countedBytes() int64 {
response, request := rq.out.bytes, rq.requestBytes
switch rq.h.config.BytesCounted {
case "response":
case config.BytesCountedResponse:
return response
case "request":
case config.BytesCountedRequest:
return request
default: // both
return response + request
case config.BytesCountedBoth:
}
return response + request
}
// banForLimit bans the client's netblock at now for a broken limit, the
+10 -9
View File
@@ -53,33 +53,34 @@ func (rq *request) limitPercentages() (percentage, percentage) {
if country == "" && !rq.skippedLookupWait {
unknown = percentage{
cfg.UnknownCountryLimitPercent,
"SWW_WAF_UNKNOWN_COUNTRY_LIMIT_PERCENT",
config.UnknownCountryLimitPercentSetting,
}
}
fetched := percentage{percent: whole}
if percent, listed := rq.h.lists.ASNLimitPercent(asn); listed {
fetched = percentage{percent, "SWW_WAF_ASN_LIMIT_PERCENT_URL"}
fetched = percentage{percent, config.ASNLimitPercentURLSetting}
}
blocklisted := percentage{percent: whole}
if rq.blocklisted && cfg.BlocklistAction == "limit" {
if rq.blocklisted &&
cfg.BlocklistAction == config.ReputationActionLimit {
blocklisted = percentage{
cfg.BlocklistLimitPercent,
"SWW_WAF_BLOCKLIST_ACTION",
config.BlocklistActionSetting,
}
}
dnsblAbuseIPDBListed := percentage{percent: whole}
if (rq.dnsblListed || rq.abuseIPDBHit) &&
cfg.DNSBLAbuseIPDBAction == "limit" {
cfg.DNSBLAbuseIPDBAction == config.ReputationActionLimit {
dnsblAbuseIPDBListed = percentage{
cfg.DNSBLAbuseIPDBLimitPercent,
"SWW_WAF_DNSBL_ABUSEIPDB_ACTION",
config.DNSBLAbuseIPDBActionSetting,
}
}
const tagSetting = "SWW_WAF_TAG_LIMIT_PERCENT"
const tagSetting = config.TagLimitPercentSetting
asnRequests := lowest(
given(cfg.TagLimitPercent, asnTag(asn), tagSetting),
@@ -107,7 +108,7 @@ func (rq *request) limitPercentages() (percentage, percentage) {
asnBytes = given(
cfg.ASNBytesLimitPercent,
asn,
"SWW_WAF_ASN_BYTES_LIMIT_PERCENT",
config.ASNBytesLimitPercentSetting,
)
}
@@ -115,7 +116,7 @@ func (rq *request) limitPercentages() (percentage, percentage) {
countryBytes = given(
cfg.CountryBytesLimitPercent,
country,
"SWW_WAF_COUNTRY_BYTES_LIMIT_PERCENT",
config.CountryBytesLimitPercentSetting,
)
}
+3 -1
View File
@@ -7,6 +7,7 @@ import (
"context"
"time"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
@@ -41,5 +42,6 @@ func (blocklists) check(
// client, given listedBy, the blocklists that list it: it does when one lists
// it and SWW_WAF_BLOCKLIST_ACTION is deny.
func (rq *request) refusedByBlocklists(listedBy []string) bool {
return len(listedBy) > 0 && rq.h.config.BlocklistAction == deny
return len(listedBy) > 0 && rq.h.config.BlocklistAction ==
config.ReputationActionDeny
}
+2 -2
View File
@@ -47,7 +47,7 @@ func (coreRuleSet) check(
rq.line.CoreRuleSetScore = &result.Score
for _, id := range result.RuleIDs {
rq.h.metrics.CoreRuleSetMatched(cfg.CoreRuleSetMode, id)
rq.h.metrics.CoreRuleSetMatched(string(cfg.CoreRuleSetMode), id)
}
threshold := cfg.CoreRuleSetScoreThreshold
@@ -99,7 +99,7 @@ func (rq *request) alertCoreRuleSetMatch(result coreruleset.Result) {
switch {
case rq.h.config.CoreRuleSetMode == config.CoreRuleSetModeDetect:
detail["mode"] = config.CoreRuleSetModeDetect
detail["mode"] = string(config.CoreRuleSetModeDetect)
case rq.h.config.Observe:
detail["mode"] = "observe"
}
+3 -1
View File
@@ -7,6 +7,7 @@ import (
"slices"
"time"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/requestlog"
)
@@ -33,7 +34,8 @@ func (countries) check(
return &verdict{
action: requestlog.ActionCountryDenied,
figures: map[string]any{
"country": country, "setting": "SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES",
"country": country,
"setting": config.ExclusivelyAllowedCountriesSetting,
},
}
}
+2 -1
View File
@@ -32,7 +32,8 @@ func (dnsbl) check(ctx context.Context, rq *request, _ time.Time) *verdict {
rq.addTag(config.DNSBLTagPrefix + strings.ToLower(zone))
}
if !rq.dnsblListed || rq.h.config.DNSBLAbuseIPDBAction != deny {
if !rq.dnsblListed ||
rq.h.config.DNSBLAbuseIPDBAction != config.ReputationActionDeny {
return nil
}
+9
View File
@@ -1,4 +1,13 @@
package waf
import "sneak.berlin/go/smallwebwaf/internal/reputation"
// BesideLookupTimeLimit is besideLookupTimeLimit.
const BesideLookupTimeLimit = besideLookupTimeLimit
// BanAbuseIPDBBlacklist does on s what a fetch of AbuseIPDB's blacklist with
// the clients on listed does.
func (s *Server) BanAbuseIPDBBlacklist(listed []reputation.BlacklistEntry) {
h := s.Handler.(*handler) //nolint:forcetypeassert // New makes it one
BanAbuseIPDBBlacklist(h.config, h.ledger, h.processLog, h.now(), listed)
}
-6
View File
@@ -104,12 +104,6 @@ func onReport() []heuristic {
}
}
// runAfterAnswer runs the heuristics of afterAnswer on the request, at the time
// it is called.
func (rq *request) runAfterAnswer(ctx context.Context) {
rq.runBanningHeuristics(ctx, afterAnswer())
}
// runHeuristics runs list, one of those checkClient runs, on the request at now,
// and returns the first verdict, or nil when none gives one. The log line's
// heuristic and heuristic_figures name the heuristic that gave it, and give its
+3 -2
View File
@@ -49,7 +49,8 @@ func (rq *request) startLookUp(
) <-chan lookupResult {
result := make(chan lookupResult, 1)
if rq.h.config.LookupSource == "off" || !canBePlaced(rq.client) {
if rq.h.config.LookupSource == config.LookupSourceOff ||
!canBePlaced(rq.client) {
result <- lookupResult{}
return result
@@ -57,7 +58,7 @@ func (rq *request) startLookUp(
client := clientGroup(rq.h.config, rq.client)
if rq.h.config.LookupSource == "file" {
if rq.h.config.LookupSource == config.LookupSourceFile {
result <- lookupResult{
lookedUp: true, answer: rq.h.lookupFile.LookUp(client),
}
+4 -38
View File
@@ -1,11 +1,11 @@
// Package waf is the server the waf command runs. It answers
// rproxy's questions, takes rproxy's reports and answers its own endpoints, and
// writes a log line for each.
// writes a log line for each. It also bans the clients on AbuseIPDB's
// blacklist each time the reputation package fetches it.
package waf
import (
"cmp"
"fmt"
"io"
"log/slog"
"net/http"
@@ -82,8 +82,8 @@ type Params struct {
// LookupFile is the lookup database they are looked up in while
// SWW_WAF_LOOKUP_SOURCE is file, and nil otherwise.
LookupFile *lookup.File
// CoreRuleSet is what NewCoreRuleSet returns: what inspects requests
// while SWW_WAF_CORE_RULE_SET_MODE is not off, and nil while it is.
// CoreRuleSet is what inspects requests while
// SWW_WAF_CORE_RULE_SET_MODE is not off, and nil while it is.
CoreRuleSet CoreRuleSetInspector
// Now tells the time by which requests are counted for the rate
// limits, bans are made and run out, and GeoJS's answers are kept,
@@ -173,40 +173,6 @@ func newHandler(params Params) *handler {
}
}
// NewCoreRuleSet returns the Core Rule Set at SWW_WAF_CORE_RULE_SET_PARANOIA_LEVEL,
// without the rules SWW_WAF_CORE_RULE_SET_DISABLED_RULES switches off, reading bodies
// up to SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE, with the exclusions in
// SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE and the fixes of the apps in SWW_WAF_APPS,
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. An exclusions file that
// coreruleset.New refuses is an error in every mode. While the mode is off, a
// set file is loaded with the Core Rule Set only to check it.
func NewCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff &&
cfg.CoreRuleSetExclusionsFile == "" {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
coreRuleSet, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil {
return nil, fmt.Errorf(
"SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE: %w",
err,
)
}
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
}
return coreRuleSet, nil
}
// handler is waf's handler. It holds what every request shares; what
// belongs to one request is in a request.
type handler struct {
+56 -25
View File
@@ -20,6 +20,7 @@ import (
"sneak.berlin/go/smallwebwaf/internal/bans"
"sneak.berlin/go/smallwebwaf/internal/config"
"sneak.berlin/go/smallwebwaf/internal/config/configtest"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
"sneak.berlin/go/smallwebwaf/internal/geojs"
"sneak.berlin/go/smallwebwaf/internal/lookup"
"sneak.berlin/go/smallwebwaf/internal/metrics"
@@ -431,7 +432,8 @@ func startRProxy(
// With no geojsURL, there is no stand-in for GeoJS to look clients up at, and
// SWW_WAF_LOOKUP_SOURCE is off unless env sets it. While it is file, the lookup
// database SWW_WAF_LOOKUP_DB_PATH names is read. Clients are checked with AbuseIPDB
// at abuseIPDBURL while env sets SWW_WAF_ABUSEIPDB_KEY.
// at abuseIPDBURL while env sets SWW_WAF_ABUSEIPDB_KEY, and its blacklist is
// fetched from abuseIPDBBlacklistURL.
// SWW_WAF_CORE_RULE_SET_MODE is off unless env sets it, so that only the tests of the
// Core Rule Set have their requests inspected by it.
func newWAF(
@@ -503,24 +505,20 @@ func newWAFWith(
}
}
coreRuleSet, err := waf.NewCoreRuleSet(cfg)
if err != nil {
t.Fatalf("Core Rule Set: %v", err)
}
params := waf.Params{
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
LookupFile: lookupFile,
CoreRuleSet: coreRuleSet,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
Config: cfg,
RequestLog: out,
ProcessLog: processLog,
LookupFile: lookupFile,
Now: now,
Rules: ruleFiles,
Alerts: alertQueue,
// The tests of the limit set it back, and hold the Core Rule Set
// with a stand-in.
BesideLookupTimeLimit: time.Hour,
}
addCoreRuleSet(t, &params)
addCounters(&params)
addOutsideSources(&params, geojsURL, abuseIPDBCheckURL)
@@ -529,6 +527,30 @@ func newWAFWith(
return server, out, alertQueue
}
// addCoreRuleSet adds to params the Core Rule Set, with the settings for it,
// while SWW_WAF_CORE_RULE_SET_MODE is not off.
func addCoreRuleSet(t *testing.T, params *waf.Params) {
t.Helper()
cfg := params.Config
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff {
return
}
coreRuleSet, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
if err != nil {
t.Fatalf("Core Rule Set: %v", err)
}
params.CoreRuleSet = coreRuleSet
}
// addCounters adds to params the metrics, the table of clients, the ledger
// and the anomaly counters, as sww builds them from params' settings. The
// metrics read the ledger, the table of clients and the rules.
@@ -575,8 +597,9 @@ func addCounters(params *waf.Params) {
}
// addOutsideSources adds to params the lists fetched from URLs, the DNSBL
// zones' verdicts, AbuseIPDB's scores from abuseIPDBCheckURL, routewatch's
// answers while its setting is set, and GeoJS at geojsURL, as sww builds
// zones' verdicts, AbuseIPDB's scores from abuseIPDBCheckURL and its
// blacklist from abuseIPDBBlacklistURL, routewatch's answers while its
// setting is set, and GeoJS at geojsURL, as sww builds
// them from params' settings and the parts addCounters added. The metrics
// read the lists, the zones' verdicts, and AbuseIPDB's while its key is set.
func addOutsideSources(
@@ -605,15 +628,23 @@ func addOutsideSources(
Alerts: alertQueue,
})
params.AbuseIPDB = reputation.NewAbuseIPDB(reputation.AbuseIPDBParams{
URL: abuseIPDBCheckURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
URL: abuseIPDBCheckURL,
Key: cfg.AbuseIPDBKey,
MinScore: cfg.AbuseIPDBMinScore,
DailyBudget: cfg.AbuseIPDBDailyBudget,
CacheTTL: cfg.IPReputationCacheTTL,
Timeout: cfg.DNSBLAbuseIPDBTimeout,
BlacklistURL: abuseIPDBBlacklistURL,
Threshold: cfg.AbuseIPDBThreshold,
BlacklistRefresh: cfg.AbuseIPDBBlacklistRefresh,
Blacklisted: func(listed []reputation.BlacklistEntry) {
waf.BanAbuseIPDBBlacklist(
cfg, ledger, processLog, params.Now(), listed,
)
},
Now: params.Now,
ProcessLog: processLog,
Alerts: alertQueue,
})
if cfg.RouteWatchURL != "" {
-4
View File
@@ -7,10 +7,6 @@ import (
"sneak.berlin/go/smallwebwaf/internal/bans"
)
// deny is the SWW_WAF_BLOCKLIST_ACTION and the SWW_WAF_DNSBL_ABUSEIPDB_ACTION that
// refuses the requests of a client a source lists.
const deny = "deny"
// noteListed notes each of sources, the URLs of the blocklists or the
// DNSBL zones, their keys masked, that list the client, as noteHit does,
// with reason.
+25 -8
View File
@@ -822,22 +822,39 @@ const abuseipdb = reputation.AbuseIPDBSource
// through which AbuseIPDB is asked.
const abuseIPDBURL = "abuseipdb://stand-in/api/v2/check"
// abuseIPDBBlacklistURL is where newWAF has AbuseIPDB's blacklist fetched
// from: at abuseIPDBStandIn too.
const abuseIPDBBlacklistURL = "abuseipdb://stand-in/api/v2/blacklist"
// abuseIPDBStandIn is a stand-in for AbuseIPDB that gives every client the
// score 100, at once and without the network.
// score 100, at once and without the network. Its blacklist lists client
// alone, with the score 100, to a fetch with accountKey that asks for the
// clients scored 90 or more, the default threshold; it refuses any other
// fetch of it with 400.
type abuseIPDBStandIn struct{}
// RoundTrip answers req with the score 100.
// RoundTrip answers req with the score 100, or with the blacklist.
func (abuseIPDBStandIn) RoundTrip(
req *http.Request,
) (*http.Response, error) {
status, body := http.StatusOK, `{"data":{"abuseConfidenceScore":100}}`
if req.URL.Path == "/api/v2/blacklist" {
body = `{"data":[{"ipAddress":"` + client +
`","abuseConfidenceScore":100}]}`
if req.Header.Get("Key") != accountKey ||
req.URL.RawQuery != "confidenceMinimum=90" {
status, body = http.StatusBadRequest, `{"errors":[]}`
}
}
return &http.Response{
StatusCode: http.StatusOK,
Status: "200 OK",
StatusCode: status,
Status: fmt.Sprintf("%d %s", status, http.StatusText(status)),
Header: http.Header{},
Body: io.NopCloser(
strings.NewReader(`{"data":{"abuseConfidenceScore":100}}`),
),
Request: req,
Body: io.NopCloser(strings.NewReader(body)),
Request: req,
}, nil
}
+11 -1
View File
@@ -345,6 +345,16 @@ func timing(start, end time.Time) *float64 {
return new(requestlog.Milliseconds(end.Sub(start)))
}
// banAndCount runs list, afterAnswer or onReport, whose heuristics only ban.
// It then counts the request for the anomaly thresholds and adds it to its
// client's history. list runs first, so that a refusal limit it finds broken
// is in that history. ctx is the request's own context.
func (rq *request) banAndCount(ctx context.Context, list []heuristic) {
rq.runBanningHeuristics(ctx, list)
rq.countAnomalies()
rq.addToHistory()
}
// addToHistory adds the request, which has ended, to its client's
// history, and counts its offences in the metrics, and then the lookup's
// answer about the client, as answerAtTheEnd gives it, to that history and
@@ -421,7 +431,7 @@ func (rq *request) answerAtTheEnd() (geojs.Answer, bool) {
return geojs.Answer{}, false
}
if rq.h.config.LookupSource == "file" {
if rq.h.config.LookupSource == config.LookupSourceFile {
return rq.lookupAnswer, true
}
+21 -28
View File
@@ -177,11 +177,13 @@ func (h *handler) answerQuestion(w http.ResponseWriter, r *http.Request) {
peer.Unmap(),
true,
)
// The last deferred runs first, so that what is held has the finished log
// line. Go's server sends the answer only once this function has
// returned, so the report cannot come before it is held.
defer rq.holdForReport()
defer rq.finish()
// These run even when a check panics. finish runs first, so that what is
// held has the finished log line. Go's server sends the answer only once
// this function has returned, so the report cannot come before it is held.
defer func() {
rq.finish()
rq.holdForReport()
}()
rq.site = r.Host
rq.line.WAFLine = requestlog.WAFLineDecision
@@ -190,35 +192,28 @@ func (h *handler) answerQuestion(w http.ResponseWriter, r *http.Request) {
underOwnPrefix := strings.HasPrefix(r.URL.Path, ownEndpointPrefix)
if refused == nil && !underOwnPrefix {
// In observe mode, what enforce mode would have refused counts here.
defer rq.runAfterAnswer(r.Context())
rq.allow()
// In observe mode, what enforce mode would have refused counts here.
rq.runBanningHeuristics(r.Context(), afterAnswer())
return
}
// The last deferred runs first: runAfterAnswer before addToHistory, so that
// a broken refusal limit is in the client's history.
defer rq.addToHistory()
defer rq.countAnomalies()
defer rq.runAfterAnswer(r.Context())
if refused != nil {
rq.deny(*refused)
return
} else {
// The app never sees this prefix. waf's own endpoints are at its
// own address, so this answers as a path with no endpoint does.
rq.line.Action = requestlog.ActionOwnEndpoint
rq.out.Header().Set(DispositionHeader, DispositionDeny)
http.Error(
rq.out,
http.StatusText(http.StatusNotFound),
http.StatusNotFound,
)
}
// The app never sees this prefix. waf's own endpoints are at its
// own address, so this answers as a path with no endpoint does.
rq.line.Action = requestlog.ActionOwnEndpoint
rq.out.Header().Set(DispositionHeader, DispositionDeny)
http.Error(
rq.out,
http.StatusText(http.StatusNotFound),
http.StatusNotFound,
)
rq.banAndCount(r.Context(), afterAnswer())
}
// readQuestion returns the visitor's address and the body a question carries,
@@ -491,9 +486,7 @@ func (h *handler) finishWith(
if rq.allowed {
rq.line.DurationUpstreamTotalMS = &report.DurationUpstreamTotalMS
rq.runBanningHeuristics(ctx, onReport())
rq.countAnomalies()
rq.addToHistory()
rq.banAndCount(ctx, onReport())
rq.h.metrics.RequestReported(
&rq.line,