Give every new unlocker a directory of its own (closes #71)

A passphrase unlocker added to a vault that had one, and a PGP, keychain
or Secure Enclave unlocker added on the same day as another of its type,
were written into the existing unlocker's directory file by file, so a
crash part-way left a current unlocker whose files did not belong
together.

Unlocker directories, keychain items and Secure Enclave keys are now
named with the time to the nanosecond, and secret.WriteDir refuses a
directory that exists. Adding a passphrase unlocker writes the new one,
points current-unlocker at it, and only then removes the vault's other
passphrase unlockers.

Model: opus-5-5

.golangci.yml

@@ -10,20 +10,14 @@ run:
 
 linters:
   default: all
-  enable:
-    # Successor to the deprecated gomodguard. Named explicitly, rather than
-    # left to `default: all`, because it carries the module policy below.
-    - gomodguard_v2
   disable:
     # Genuinely incompatible with project patterns
     - exhaustruct      # Requires all struct fields
+    - depguard         # Dependency allow/block lists
     - godot            # Requires comments to end with periods
+    - wsl              # Deprecated, replaced by wsl_v5
     - wrapcheck        # Too verbose for internal packages
     - varnamelen       # Short names like db, id are idiomatic Go
-    # Deprecated: the warning is attached to the old name, so it is
-    # silenced by disabling that name, not by enabling the successor.
-    - wsl              # Deprecated, replaced by wsl_v5
-    - gomodguard       # Deprecated, replaced by gomodguard_v2
   settings:
     lll:
       line-length: 88
@@ -34,64 +28,6 @@ linters:
       max-complexity: 15
     dupl:
       threshold: 100
-    depguard:
-      # Test-support code must not be compiled into the shipped binary. A
-      # test-support package exists to hand a test privileges the program
-      # itself must never have, so a file that is not a test must not import
-      # one. Test files, and the files inside a package whose directory name
-      # ends in `test`, are where that code belongs, and are exempt.
-      #
-      # The deny list below is the one part of this file a repository is
-      # expected to extend, and the only part it may. depguard matches an
-      # import path against a list of prefixes, so it cannot be told "any path
-      # whose last segment ends in test"; a repository's own test-support
-      # packages have to be named here one at a time, by full import path,
-      # under a module path that differs from repository to repository. Add
-      # them; change nothing else.
-      rules:
-        test-support:
-          list-mode: lax
-          files:
-            - "$all"
-            - "!$test"
-            - "!**/*test/**"
-          deny:
-            - pkg: net/http/httptest
-              desc: >-
-                Test-support code belongs in test files and in packages whose
-                directory name ends in test, not in the shipped binary.
-    # Only decisions already recorded in the Go package defaults are
-    # listed here. Every entry matches the module path exactly.
-    gomodguard_v2:
-      blocked:
-        - module: github.com/rs/zerolog
-          recommendations:
-            - log/slog
-          reason: "Structured logging is stdlib log/slog."
-        # One entry per pre-fork module path, because the later releases
-        # are separate paths. A prefix match would be shorter but would
-        # also reach github.com/go-redis/redismock, the test double for
-        # the successor these entries recommend.
-        - module: github.com/go-redis/redis
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/go-redis/redis/v7
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/go-redis/redis/v8
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/sergi/go-diff
-          recommendations:
-            - github.com/aymanbagabas/go-udiff
-          reason: "No unified diff output; use go-udiff."
-        - module: github.com/hexops/gotextdiff
-          recommendations:
-            - github.com/aymanbagabas/go-udiff
-          reason: "Unmaintained fork; use go-udiff."
 
 issues:
   max-issues-per-linter: 0

README.md

@@ -197,6 +197,9 @@ Creates a new unlocker of the specified type:
 **Options:**
 - `--keyid <id>`: GPG key ID (optional for PGP type, uses default key if not specified)
 
+A vault has one passphrase unlocker: adding one replaces the one the vault
+has, which is removed only once the new one is the current unlocker.
+
 #### `secret unlocker remove <unlocker-id> [--force]` / `secret unlocker rm` ⚠️ 🛑
 
 **DANGER**: Permanently removes an unlocker. Like Unix `rm`, this command
@@ -243,8 +246,8 @@ Decrypts data using an Age key stored as a secret.
 ├── vaults.d/
 │   ├── default/
 │   │   ├── unlockers.d/
-│   │   │   ├── passphrase/              # Passphrase unlocker
-│   │   │   └── pgp/                     # PGP unlocker
+│   │   │   ├── passphrase-<time>/       # Passphrase unlocker
+│   │   │   └── <host>-pgp-<time>/       # PGP unlocker
 │   │   ├── secrets.d/
 │   │   │   ├── api%key/                 # Secret: api/key
 │   │   │   │   ├── versions/
@@ -260,7 +263,7 @@ Decrypts data using an Age key stored as a secret.
 │   │   │       └── current -> versions/20231215.001
 │   │   ├── vault-metadata.json          # Vault metadata
 │   │   ├── pub.age                      # Long-term public key
-│   │   └── current-unlocker -> ../unlockers.d/passphrase
+│   │   └── current-unlocker             # Current unlocker's directory name
 │   └── work/
 │       ├── unlockers.d/
 │       ├── secrets.d/

TODO.md

@@ -25,12 +25,22 @@ Bring the repo into policy compliance in one commit:
 
 # Completed Steps
 
-- 2026-10-04: `.golangci.yml` is again the canonical file from
-  `sneak/prompts`, byte for byte
-  (https://git.eeqj.de/sneak/secret/issues/66). It runs `gomodguard_v2`
-  in place of the deprecated `gomodguard`, so the lint no longer warns,
-  and enables `depguard` with a rule that keeps `net/http/httptest` out of
-  non-test files. Neither raised a finding in this repo.
+- 2026-10-04: A crash while an unlocker is being replaced no longer
+  leaves a current unlocker that cannot open the vault
+  (https://git.eeqj.de/sneak/secret/issues/71). Every new unlocker gets
+  a directory of its own, named with the time to the nanosecond:
+  `passphrase-<time>`, `<host>-pgp-<time>`, and for a keychain or Secure
+  Enclave unlocker the keychain item or Secure Enclave key, which names
+  the directory, carries the time instead of the day. `secret.WriteDir`
+  fails on a directory that exists instead of writing into it.
+  `unlocker add passphrase` writes the new unlocker, makes it current,
+  and only then removes the vault's other passphrase unlockers; a crash
+  between the last two steps leaves the old one beside the new, and the
+  old passphrase still opens the vault through it until the next
+  `unlocker add passphrase` or an `unlocker remove` removes it. A PGP,
+  keychain or
+  Secure Enclave unlocker added on the same host and day as another of
+  its type is added beside it instead of replacing it.
 - 2026-10-04: `secret unlocker add pgp` works on Linux
   (https://git.eeqj.de/sneak/secret/issues/88). `CreatePGPUnlocker` gets
   the vault's long-term key as adding a passphrase unlocker does, with the
@@ -65,9 +75,7 @@ Bring the repo into policy compliance in one commit:
   and encrypt everything before writing anything. All four unlocker
   types write their files through `secret.WriteDir`: a new unlocker is
   built in a temporary directory, renamed into place when complete and
-  removed on a failure. One added under the directory name of an
-  existing unlocker is still written into that directory in place
-  (https://git.eeqj.de/sneak/secret/issues/71).
+  removed on a failure.
 - 2026-10-04: `secret unlocker select` and `secret unlocker remove`
   skip, with the warning `unlocker list` gives, an unlocker directory
   whose metadata file cannot be checked for, read or parsed, instead of
@@ -163,12 +171,6 @@ Bring the repo into policy compliance in one commit:
   into place, and removals rename out of the way first, so a version
   or secret is never half-added and never half-removed. An
   interrupted command can still leave:
-    - a broken unlocker, when it was replacing one: an unlocker added
-      under the directory name of an existing one is rewritten file by
-      file. That happens to a passphrase unlocker added to a vault that
-      has one, and to a PGP, keychain or Secure Enclave unlocker added
-      on the same host and day as another of its type
-      (https://git.eeqj.de/sneak/secret/issues/71);
     - from `init` or `vault create` killed after the passphrase prompt
       but before the unlocker is written, a vault with no unlocker,
       which `vault create` has already made the current vault;

internal/cli/integration_test.go

@@ -366,8 +366,15 @@ func test01Initialize(t *testing.T, tempDir, testMnemonic, testPassphrase string
 	unlockersDir := filepath.Join(defaultVaultDir, "unlockers.d")
 	verifyFileExists(t, unlockersDir)
 
+	// Check current-unlocker file names the unlocker's directory
+	currentUnlockerFile := filepath.Join(defaultVaultDir, "current-unlocker")
+	verifyFileExists(t, currentUnlockerFile)
+
+	currentUnlockerContent := readFile(t, currentUnlockerFile)
+	assert.Contains(t, string(currentUnlockerContent), "passphrase", "current unlocker should point to passphrase type")
+
 	// Verify passphrase unlocker was created
-	passphraseUnlockerDir := filepath.Join(unlockersDir, "passphrase")
+	passphraseUnlockerDir := filepath.Join(unlockersDir, string(currentUnlockerContent))
 	verifyFileExists(t, passphraseUnlockerDir)
 
 	// Check unlocker metadata
@@ -382,13 +389,6 @@ func test01Initialize(t *testing.T, tempDir, testMnemonic, testPassphrase string
 	encryptedLTPubKey := filepath.Join(passphraseUnlockerDir, "pub.age")
 	verifyFileExists(t, encryptedLTPubKey)
 
-	// Check current-unlocker file contains the relative path
-	currentUnlockerFile := filepath.Join(defaultVaultDir, "current-unlocker")
-	verifyFileExists(t, currentUnlockerFile)
-
-	currentUnlockerContent := readFile(t, currentUnlockerFile)
-	assert.Contains(t, string(currentUnlockerContent), "passphrase", "current unlocker should point to passphrase type")
-
 	// Verify vault-metadata.json in vault
 	vaultMetadata := filepath.Join(defaultVaultDir, "vault-metadata.json")
 	verifyFileExists(t, vaultMetadata)
@@ -537,7 +537,8 @@ func test04ImportMnemonic(t *testing.T, tempDir, testMnemonic, testPassphrase st
 	verifyFileExists(t, pubKeyFile)
 
 	// Verify passphrase unlocker was created
-	passphraseUnlockerDir := filepath.Join(workVaultDir, "unlockers.d", "passphrase")
+	currentUnlocker := readFile(t, filepath.Join(workVaultDir, "current-unlocker"))
+	passphraseUnlockerDir := filepath.Join(workVaultDir, "unlockers.d", string(currentUnlocker))
 	verifyFileExists(t, passphraseUnlockerDir)
 
 	// Check unlocker files

internal/cli/path_traversal_test.go

@@ -171,7 +171,7 @@ func TestInvalidSecretNameLeavesVaultsUnchanged(t *testing.T) {
 
 	vaultDir := testStateDir + "/vaults.d/default"
 	require.Contains(t, before, vaultDir+"/secrets.d/x/")
-	require.Contains(t, before, vaultDir+"/unlockers.d/passphrase/")
+	require.Contains(t, before, vaultDir+"/current-unlocker")
 	require.Equal(t, "default", before[testStateDir+"/currentvault"])
 
 	cmd := &cobra.Command{}

internal/secret/atomic.go

@@ -3,6 +3,7 @@ package secret
 import (
 	"errors"
 	"fmt"
+	"os"
 	"path/filepath"
 
 	"github.com/spf13/afero"
@@ -62,13 +63,12 @@ func TempDirFor(fs afero.Fs, target string) (string, error) {
 	return dir, nil
 }
 
-// WriteDir calls write to write the files of the directory dir. When dir does
-// not exist yet, write writes them into a temporary directory from TempDirFor,
-// which is then renamed to dir, so that neither a failure nor a crash leaves
-// dir half-written; on a failure the temporary directory is removed, and a
-// failure to remove it is returned along with the first. A directory cannot be
-// renamed over one that has files in it, so when dir already exists, write
-// writes into it in place; dir is then never removed.
+// WriteDir calls write to write the files of the new directory dir into a
+// temporary directory from TempDirFor, which is then renamed to dir, so that
+// neither a failure nor a crash leaves dir half-written; on a failure the
+// temporary directory is removed, and a failure to remove it is returned
+// along with the first. A directory cannot be replaced in one rename, so if
+// dir already exists, WriteDir fails without calling write.
 func WriteDir(fs afero.Fs, dir string, write func(dir string) error) error {
 	exists, err := afero.Exists(fs, dir)
 	if err != nil {
@@ -76,7 +76,7 @@ func WriteDir(fs afero.Fs, dir string, write func(dir string) error) error {
 	}
 
 	if exists {
-		return write(dir)
+		return fmt.Errorf("failed to create %s: %w", dir, os.ErrExist)
 	}
 
 	// Create the directory the finished one is renamed into

internal/secret/atomic_test.go

@@ -191,6 +191,22 @@ func dirNames(t *testing.T, fs afero.Fs, dir string) []string {
 	return names
 }
 
+// dirFiles returns the contents of the files in dir, by name.
+func dirFiles(t *testing.T, fs afero.Fs, dir string) map[string]string {
+	t.Helper()
+
+	files := map[string]string{}
+
+	for _, name := range dirNames(t, fs, dir) {
+		data, err := afero.ReadFile(fs, filepath.Join(dir, name))
+		require.NoError(t, err)
+
+		files[name] = string(data)
+	}
+
+	return files
+}
+
 // writeLongTermKey gives the test vault under stateDir a new long-term key
 // and returns it.
 func writeLongTermKey(
@@ -666,14 +682,14 @@ func TestPassphraseUnlockerIsWholeOrAbsent(t *testing.T) {
 			vaultDir, err := vlt.GetDirectory()
 			require.NoError(t, err)
 
-			unlockerDir := filepath.Join(vaultDir, "unlockers.d", "passphrase")
+			// The vault has no unlocker yet, so any directory in here is
+			// the new one
+			unlockersDir := filepath.Join(vaultDir, "unlockers.d")
 
 			fs := hookFs{Fs: base, before: func(string, string) error {
-				exists, err := afero.DirExists(base, unlockerDir)
-				require.NoError(t, err)
-
-				if exists {
-					assert.ElementsMatch(t, files, dirNames(t, base, unlockerDir),
+				for _, name := range dirNames(t, base, unlockersDir) {
+					assert.ElementsMatch(t, files,
+						dirNames(t, base, filepath.Join(unlockersDir, name)),
 						"unlocker directory visible before it was complete")
 				}
 
@@ -683,14 +699,118 @@ func TestPassphraseUnlockerIsWholeOrAbsent(t *testing.T) {
 			passphrase := memguard.NewBufferFromBytes([]byte(unlockerPassphrase))
 			defer passphrase.Destroy()
 
-			_, err = vault.NewVault(fs, stateDir, testVaultName).
+			unlocker, err := vault.NewVault(fs, stateDir, testVaultName).
 				CreatePassphraseUnlocker(passphrase)
 			require.NoError(t, err)
-			assert.ElementsMatch(t, files, dirNames(t, base, unlockerDir))
+			assert.ElementsMatch(t, files, dirNames(t, base, unlocker.GetDirectory()))
 		})
 	}
 }
 
+// TestPassphraseUnlockerReplacementKeepsVaultOpen replaces the vault's
+// passphrase unlocker, failing at each change the replacement makes in turn,
+// until an attempt makes all of its changes; each attempt starts from what
+// the one before left. Both at the change that fails, which is where a crash
+// would leave the vault, and after the attempt returns, the vault must open
+// with the passphrase through its current unlocker. Once an attempt
+// succeeds, the vault must have one passphrase unlocker left.
+func TestPassphraseUnlockerReplacementKeepsVaultOpen(t *testing.T) {
+	t.Setenv(secret.EnvMnemonic, testMnemonic)
+	t.Setenv(secret.EnvUnlockPassphrase, unlockerPassphrase)
+
+	for _, tfs := range testFilesystems {
+		t.Run(tfs.name, func(t *testing.T) {
+			base, stateDir := tfs.open(t)
+			vlt, err := vault.CreateVault(base, stateDir, testVaultName)
+			require.NoError(t, err)
+
+			ltIdentity, err := vlt.GetOrDeriveLongTermKey()
+			require.NoError(t, err)
+
+			passphrase := memguard.NewBufferFromBytes([]byte(unlockerPassphrase))
+			defer passphrase.Destroy()
+
+			_, err = vlt.CreatePassphraseUnlocker(passphrase)
+			require.NoError(t, err)
+
+			// From here on only the current unlocker opens the vault
+			t.Setenv(secret.EnvMnemonic, "")
+
+			assertOpens := vaultOpensCheck(t, base, stateDir, ltIdentity)
+
+			for failAt := 1; ; failAt++ {
+				changes := 0
+				fs := hookFs{Fs: base, before: func(string, string) error {
+					changes++
+					if changes != failAt {
+						return nil
+					}
+
+					assertOpens()
+
+					return errInjected
+				}}
+
+				replacing := vault.NewVault(fs, stateDir, testVaultName)
+				replacing.Unlock(ltIdentity)
+
+				_, err = replacing.CreatePassphraseUnlocker(passphrase)
+
+				assertOpens()
+
+				if changes < failAt {
+					require.NoError(t, err)
+
+					break
+				}
+
+				require.ErrorIs(t, err, errInjected)
+			}
+
+			unlockers, err := vlt.ListUnlockers()
+			require.NoError(t, err)
+			assert.Len(t, unlockers, 1)
+		})
+	}
+}
+
+// vaultOpensCheck returns a function that checks that the test vault under
+// stateDir opens through its current unlocker, with the test passphrase, to
+// the long-term key ltIdentity. Opening it takes a second, so an unlocker
+// directory it has opened through before is not opened again: it must hold
+// the same files as then.
+func vaultOpensCheck(
+	t *testing.T, fs afero.Fs, stateDir string, ltIdentity *age.X25519Identity,
+) func() {
+	t.Helper()
+
+	vaultDir := filepath.Join(stateDir, "vaults.d", testVaultName)
+
+	// The files of each unlocker directory the vault has opened through
+	opened := map[string]map[string]string{}
+
+	return func() {
+		t.Helper()
+
+		current, err := afero.ReadFile(fs, filepath.Join(vaultDir, "current-unlocker"))
+		require.NoError(t, err)
+
+		files := dirFiles(t, fs, filepath.Join(vaultDir, "unlockers.d", string(current)))
+
+		if before, ok := opened[string(current)]; ok {
+			assert.Equal(t, before, files, "unlocker changed since it opened the vault")
+
+			return
+		}
+
+		key, err := vault.NewVault(fs, stateDir, testVaultName).UnlockVault()
+		require.NoError(t, err)
+		assert.Equal(t, ltIdentity.Recipient().String(), key.Recipient().String())
+
+		opened[string(current)] = files
+	}
+}
+
 // TestWriteDirFailureLeavesNothing makes writing a new directory fail after
 // a file has been written in it, and checks that neither the directory nor
 // its temporary directory is left behind; and, when the temporary directory
@@ -736,10 +856,10 @@ func TestWriteDirFailureLeavesNothing(t *testing.T) {
 	}
 }
 
-// TestWriteDirKeepsExistingDir makes writing into a directory that already
-// exists fail, and checks that the directory, with what was in it, is still
-// there: WriteDir writes into it in place and never removes it.
-func TestWriteDirKeepsExistingDir(t *testing.T) {
+// TestWriteDirRefusesExistingDir checks that WriteDir fails, without calling
+// write, when the directory already exists, and leaves the directory as it
+// was: it never writes into a directory in place.
+func TestWriteDirRefusesExistingDir(t *testing.T) {
 	t.Parallel()
 
 	for _, tfs := range testFilesystems {
@@ -747,17 +867,17 @@ func TestWriteDirKeepsExistingDir(t *testing.T) {
 			t.Parallel()
 
 			fs, dir := tfs.open(t)
-			target := filepath.Join(dir, "unlockers.d", "passphrase")
+			target := filepath.Join(dir, "unlockers.d", "existing")
 			require.NoError(t, fs.MkdirAll(target, secret.DirPerms))
 			require.NoError(t, secret.WriteFileAtomic(fs,
 				filepath.Join(target, unlockerMetadataFile), []byte("{}")))
 
-			err := secret.WriteDir(fs, target, func(got string) error {
-				assert.Equal(t, target, got)
+			err := secret.WriteDir(fs, target, func(string) error {
+				t.Error("write called for a directory that exists")
 
-				return errInjected
+				return nil
 			})
-			require.ErrorIs(t, err, errInjected)
+			require.ErrorIs(t, err, os.ErrExist)
 			assert.Equal(t, []string{unlockerMetadataFile}, dirNames(t, fs, target))
 		})
 	}

internal/secret/constants.go

@@ -16,6 +16,12 @@ const (
 	EnvUnlockPassphrase = "SB_UNLOCK_PASSPHRASE"
 	// EnvGPGKeyID is the environment variable for providing the GPG key ID
 	EnvGPGKeyID = "SB_GPG_KEY_ID"
+
+	// UnlockerTimeFormat is the layout of the time, in UTC, in the name of a
+	// new unlocker's directory, keychain item and Secure Enclave key. It runs
+	// to the nanosecond, so that every new unlocker, even one added right
+	// after another, gets a directory of its own.
+	UnlockerTimeFormat = "2006-01-02.15.04.05.000000000"
 )
 
 // File system permission constants

internal/secret/keychainunlocker.go

@@ -233,10 +233,10 @@ func generateKeychainUnlockerName(vaultName string) (string, error) {
 		return "", fmt.Errorf("failed to get hostname: %w", err)
 	}
 
-	// Format: secret-<vault>-<hostname>-<date>
-	enrollmentDate := time.Now().Format("2006-01-02")
+	// Format: secret-<vault>-<hostname>-<time>
+	enrollmentTime := time.Now().UTC().Format(UnlockerTimeFormat)
 
-	return fmt.Sprintf("secret-%s-%s-%s", vaultName, hostname, enrollmentDate), nil
+	return fmt.Sprintf("secret-%s-%s-%s", vaultName, hostname, enrollmentTime), nil
 }
 
 // getLongTermPrivateKey retrieves the long-term private key either from environment or current unlocker

internal/secret/pgpunlocker.go

@@ -209,21 +209,20 @@ func (p *PGPUnlocker) GetGPGKeyID() (string, error) {
 }
 
 // generatePGPUnlockerName generates a unique name for the PGP unlocker
-// based on hostname and date
+// based on hostname and time
 func generatePGPUnlockerName() (string, error) {
 	hostname, err := os.Hostname()
 	if err != nil {
 		return "", fmt.Errorf("failed to get hostname: %w", err)
 	}
 
-	// Format: hostname-pgp-YYYY-MM-DD
-	enrollmentDate := time.Now().Format("2006-01-02")
+	enrollmentTime := time.Now().UTC().Format(UnlockerTimeFormat)
 
-	return fmt.Sprintf("%s-pgp-%s", hostname, enrollmentDate), nil
+	return fmt.Sprintf("%s-pgp-%s", hostname, enrollmentTime), nil
 }
 
 // pgpUnlockerDir returns the current vault and the directory in it for a
-// new PGP unlocker, named after the host and the day.
+// new PGP unlocker, named after the host and the time.
 //
 //nolint:ireturn // the vault is only available behind VaultInterface
 func pgpUnlockerDir(

internal/secret/pgpunlocker_test.go

@@ -7,6 +7,7 @@ import (
 
 	"git.eeqj.de/sneak/secret/internal/secret"
 	"git.eeqj.de/sneak/secret/internal/vault"
+	"github.com/awnumar/memguard"
 	"github.com/spf13/afero"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
@@ -63,3 +64,38 @@ func TestCreatePGPUnlockerFailureWritesNothing(t *testing.T) {
 	require.NoError(t, err)
 	assert.Empty(t, dirNames(t, base, filepath.Join(vaultDir, "unlockers.d")))
 }
+
+// TestPGPUnlockerAddedTwiceKeepsFirst adds two PGP unlockers one right after
+// the other, so on the same host and day, and checks that the second gets a
+// directory of its own and leaves the first one's files as they were.
+// CreatePGPUnlocker does not check whether the GPG key already has an
+// unlocker, so the test key serves for both.
+func TestPGPUnlockerAddedTwiceKeepsFirst(t *testing.T) {
+	installFakeGPG(t)
+	t.Setenv(secret.EnvMnemonic, testMnemonic)
+
+	original := secret.GPGEncryptFunc
+
+	t.Cleanup(func() { secret.GPGEncryptFunc = original })
+
+	// Stands in for gpg, which the test does not have: "encrypts" by copying
+	secret.GPGEncryptFunc = func(data *memguard.LockedBuffer, _ string) ([]byte, error) {
+		return []byte(data.String()), nil
+	}
+
+	fs := afero.NewMemMapFs()
+	_, err := vault.CreateVault(fs, testVaultStateDir, testVaultName)
+	require.NoError(t, err)
+
+	first, err := secret.CreatePGPUnlocker(
+		fs, testVaultStateDir, testGPGKeyID, testGPGFingerprint)
+	require.NoError(t, err)
+
+	firstFiles := dirFiles(t, fs, first.GetDirectory())
+
+	second, err := secret.CreatePGPUnlocker(
+		fs, testVaultStateDir, testGPGKeyID, testGPGFingerprint)
+	require.NoError(t, err)
+	assert.NotEqual(t, first.GetDirectory(), second.GetDirectory())
+	assert.Equal(t, firstFiles, dirFiles(t, fs, first.GetDirectory()))
+}

internal/secret/seunlocker_darwin.go

@@ -193,14 +193,14 @@ func generateSEKeyLabel(vaultName string) (string, error) {
 		return "", fmt.Errorf("failed to get hostname: %w", err)
 	}
 
-	enrollmentDate := time.Now().UTC().Format("2006-01-02")
+	enrollmentTime := time.Now().UTC().Format(UnlockerTimeFormat)
 
 	return fmt.Sprintf(
 		"%s.%s-%s-%s",
 		seKeyLabelPrefix,
 		vaultName,
 		hostname,
-		enrollmentDate,
+		enrollmentTime,
 	), nil
 }
 

internal/vault/unlockers.go

@@ -2,8 +2,10 @@ package vault
 
 import (
 	"encoding/json"
+	"errors"
 	"fmt"
 	"log/slog"
+	"os"
 	"path/filepath"
 	"strings"
 	"time"
@@ -101,7 +103,7 @@ func (v *Vault) GetCurrentUnlocker() (secret.Unlocker, error) {
 
 // resolveUnlockerDirectory reads the current-unlocker file to get the
 // unlocker directory path
-// The file contains just the unlocker name (e.g., "passphrase")
+// The file contains just the name of the unlocker's directory in unlockers.d
 func (v *Vault) resolveUnlockerDirectory(currentUnlockerPath string) (string, error) {
 	secret.Debug("Reading current-unlocker file", "path", currentUnlockerPath)
 
@@ -339,7 +341,10 @@ func (v *Vault) SelectUnlocker(unlockerID string) error {
 	return nil
 }
 
-// CreatePassphraseUnlocker creates a new passphrase-protected unlocker
+// CreatePassphraseUnlocker creates a new passphrase-protected unlocker in a
+// directory of its own, makes it the current unlocker, and only then removes
+// the vault's other passphrase unlockers: a vault keeps one. A crash at any
+// point leaves a complete current unlocker, the old one or the new.
 // The passphrase must be provided as a LockedBuffer for security
 func (v *Vault) CreatePassphraseUnlocker(
 	passphrase *memguard.LockedBuffer,
@@ -351,13 +356,23 @@ func (v *Vault) CreatePassphraseUnlocker(
 
 	// We need to get the long-term key (either from memory if unlocked, or
 	// derive it). Getting it before anything is written means failing to
-	// get it changes nothing, even when replacing the current unlocker.
+	// get it changes nothing.
 	ltIdentity, err := v.GetOrDeriveLongTermKey()
 	if err != nil {
 		return nil, fmt.Errorf("failed to get long-term key: %w", err)
 	}
 
-	unlockerDir := filepath.Join(vaultDir, "unlockers.d", unlockerTypePassphrase)
+	unlockersDir := filepath.Join(vaultDir, "unlockers.d")
+
+	// The passphrase unlockers the new one replaces
+	oldDirs, err := v.passphraseUnlockerDirs(unlockersDir)
+	if err != nil {
+		return nil, err
+	}
+
+	createdAt := time.Now()
+	unlockerDir := filepath.Join(unlockersDir, unlockerTypePassphrase+"-"+
+		createdAt.UTC().Format(secret.UnlockerTimeFormat))
 
 	// Generate new age keypair for unlocker
 	unlockerIdentity, err := age.GenerateX25519Identity()
@@ -377,7 +392,7 @@ func (v *Vault) CreatePassphraseUnlocker(
 
 	metadata := UnlockerMetadata{
 		Type:      unlockerTypePassphrase,
-		CreatedAt: time.Now(),
+		CreatedAt: createdAt,
 		Flags:     []string{},
 	}
 
@@ -395,16 +410,54 @@ func (v *Vault) CreatePassphraseUnlocker(
 		return nil, err
 	}
 
-	// Create the unlocker instance
-	unlocker := secret.NewPassphraseUnlocker(v.fs, unlockerDir, metadata)
+	// Select the new unlocker by its directory, not by its ID: an old
+	// passphrase unlocker created in the same minute has the same ID.
+	currentUnlockerPath := filepath.Join(vaultDir, "current-unlocker")
 
-	// Select this unlocker as current
-	err = v.SelectUnlocker(unlocker.GetID())
+	err = secret.WriteFileAtomic(v.fs, currentUnlockerPath,
+		[]byte(filepath.Base(unlockerDir)))
 	if err != nil {
 		return nil, fmt.Errorf("failed to select new unlocker: %w", err)
 	}
 
-	return unlocker, nil
+	for _, oldDir := range oldDirs {
+		err = secret.RemoveDirAtomic(v.fs, oldDir)
+		if err != nil {
+			return nil, fmt.Errorf(
+				"created and selected the new passphrase unlocker: %w", err)
+		}
+	}
+
+	return secret.NewPassphraseUnlocker(v.fs, unlockerDir, metadata), nil
+}
+
+// passphraseUnlockerDirs returns the directories in unlockersDir that hold
+// passphrase unlockers. A directory ListUnlockers skips is left out, with the
+// same warning.
+func (v *Vault) passphraseUnlockerDirs(unlockersDir string) ([]string, error) {
+	files, err := afero.ReadDir(v.fs, unlockersDir)
+	if errors.Is(err, os.ErrNotExist) {
+		return nil, nil
+	}
+
+	if err != nil {
+		return nil, fmt.Errorf("failed to read unlockers directory: %w", err)
+	}
+
+	var dirs []string
+
+	for _, file := range files {
+		if !file.IsDir() {
+			continue
+		}
+
+		metadata, ok := v.readUnlockerMetadataOrWarn(unlockersDir, file.Name())
+		if ok && metadata.Type == unlockerTypePassphrase {
+			dirs = append(dirs, filepath.Join(unlockersDir, file.Name()))
+		}
+	}
+
+	return dirs, nil
 }
 
 // readUnlockerMetadata reads and parses the unlocker-metadata.json file in