rtnetmon

rtnetmon is a WTFPL-licensed Go terminal (CLI/TUI) network monitor by @sneak that shows real-time network health, packet loss, and latency across one or two network interfaces on Linux and macOS.

Overview

rtnetmon is a terminal-based network monitoring tool that provides real-time visibility into network health, packet loss, and latency across one or two network interfaces simultaneously. It runs on Linux and macOS and uses a terminal dashboard interface.

Features

• Interface Monitoring: Monitor one or two network interfaces simultaneously
• Real-time Updates: Live dashboard with sub-second updates
• Comprehensive Metrics:
  • ICMP reachability tests
  • Packet loss percentage
  • TCP connection latency
  • Interface health status
• Visual Indicators: Color-coded status, spinners, and meters for quick status assessment
  • Packet loss meter uses reverse coloring (empty/green = good, full/red = bad)
• Detailed Logging: Optional logging to file for debugging and analysis

Requirements

• Linux or macOS
• Go 1.21 or later
• Root/sudo access (for raw ICMP packets)
• ping command available in PATH
• On Linux: ip (with /proc/net/route as a fallback)
• On macOS: netstat

Platform support and interface detection

rtnetmon monitors either one or two interfaces, chosen automatically for the platform it runs on. When only one interface is detected, the dashboard shows a single pane.

Linux. The two named interfaces (--ifaceA/--ifaceB, default gu0/backhaul0) are used when both exist — this is the original dual-bridge setup, unchanged. When neither exists, the single default-route interface is monitored instead.

macOS. The physical internet interface is found from the default route. When a VPN client is running (Mullvad and similar clients create a utun tunnel that carries a default route or holds a routable address), that tunnel is monitored as the primary pane alongside the physical interface. With no VPN running, only the physical interface is monitored. Interface names are detected on macOS; the --ifaceA/--ifaceB flags are not used there, but --labelA/--labelB still set the pane labels.

Supported matrix

OS	Interfaces monitored
Linux	gu0 + backhaul0 when both exist (two panes)
Linux	the single default-route interface otherwise (one pane)
macOS	VPN tunnel + physical default-route interface (two panes)
macOS	the physical default-route interface with no VPN (one pane)

Anything outside this matrix — on Linux, only one of the named pair present, or no/multiple default routes when neither is present; on macOS, no default route or more than one physical default route — exits with a clear error.

Starlink status

When the non-VPN physical gateway is a Starlink dish, two extra lines appear under that pane: dish state, uptime, obstruction and alert count on the first, and pop-ping latency and drop rate with downlink/uplink throughput on the second. They turn red when the dish is not connected or an alert is active.

Detection is a TCP connect to the dish's fixed local endpoint, 192.168.100.1:9200, made over the physical interface (the same binding the latency probes use). The dish sits behind the Starlink router, so this is not a gateway-address check. rtnetmon probes once a minute until a dish answers and then reads its status every few seconds; when no dish answers, nothing is drawn and no status is fetched. The status comes from the dish's local get_status gRPC call.

Installation

git clone https://git.eeqj.de/sneak/rtnetmon.git
cd rtnetmon
make build   # produces ./bin/rtnetmon

Usage

sudo ./bin/rtnetmon --ifaceA eth0 --labelA "Primary WAN" --ifaceB wlan0 --labelB "Backup WiFi"

Command Line Options

• --ifaceA: Primary network interface (default: "gu0")
• --labelA: Label for primary interface (default: "gu LAN - VPN outbound")
• --ifaceB: Secondary network interface (default: "backhaul0")
• --labelB: Label for secondary interface (default: "Cox cable direct")
• --hosts: Comma-separated list of hosts to monitor
• --logfile: Path to log file (default: "/tmp/rtnetmon.log")

Keyboard Controls

• q or Ctrl+C: Quit the application

Project Structure

rtnetmon/
├── cmd/rtnetmon/       # main entry point (thin: calls internal/cli)
│   └── main.go
├── internal/
│   ├── cli/            # command-line interface using Cobra
│   │   └── root.go
│   ├── netdetect/      # per-platform interface/route detection and selection
│   │   ├── netdetect.go     # selection logic and route parsers (pure)
│   │   ├── routes_linux.go  # Linux default-route query (build-tagged)
│   │   └── routes_darwin.go # macOS default-route query (build-tagged)
│   ├── starlink/       # Starlink dish detection and status
│   │   ├── starlink.go      # Status, Client interface, pure Render
│   │   ├── client.go        # real gRPC client (get_status)
│   │   └── pb/              # generated bindings for the get_status RPC
│   └── monitor/        # core monitoring functionality
│       ├── monitor.go       # monitor types, probes, logging
│       ├── loops.go         # monitoring loops (reachability, loss, TCP)
│       ├── styles.go        # terminal color styles
│       ├── ui.go            # user interface rendering
│       ├── dial_linux.go    # TCP source binding (build-tagged)
│       └── dial_darwin.go   # TCP IP_BOUND_IF binding (build-tagged)
├── script/             # Scripts to Rule Them All entrypoints
├── .gitea/workflows/   # CI (runs script/cibuild)
├── Dockerfile          # lint + test gate phases and the build
├── Makefile            # thin shims over script/
├── .golangci.yml       # vendored linter config
├── go.mod / go.sum
└── README.md

Development

make check       # run test, lint, and fmt-check (the default target)
make build       # build ./bin/rtnetmon
make run         # build, then run ./bin/rtnetmon locally
make dev         # go run ./cmd/rtnetmon
make test        # run the test suite (test phase of the Dockerfile)
make lint        # run golangci-lint (lint phase of the Dockerfile)
make fmt         # format Go code (writes)
make fmt-check   # verify formatting (read-only)
make deps        # go mod download + go mod tidy
make docker      # build the Docker image
make cibuild     # bootstrap, check, and build the image (run by CI)
make bootstrap   # install dependencies idempotently (git, make, go)
make setup       # bootstrap plus install the git pre-commit hook
make hooks       # install the git pre-commit hook
make clean       # remove build artifacts

Linting and testing run in Docker so results do not depend on host tooling; make lint, make test, make docker, and make cibuild therefore require a Docker daemon. make check must be green before committing, and the pre-commit hook (make hooks) runs it.

Entrypoints

This repository adheres to the Scripts to Rule Them All standard: normalized scripts in script/ are the entrypoints for the development workflow, and the Makefile targets are thin shims that call them.

• script/bootstrap — install dependencies idempotently (git, make, go).
• script/setup — bootstrap plus install the git pre-commit hook.
• script/projectname — output the project name.
• script/test — run the test suite as the Dockerfile test phase.
• script/lint — run golangci-lint as the Dockerfile lint phase.
• script/fmt — format Go code (host).
• script/fmt-check — verify formatting (host, read-only).
• script/check — run test, lint, and fmt-check.
• script/docker — build the Docker image.
• script/cibuild — bootstrap, check, and build the image; run by CI.
• script/precommit — run by the pre-commit hook (go mod tidy check + check).
• script/install-precommit — install the pre-commit hook.

Using the Monitor API

The monitor package provides an object-oriented API for programmatic use:

import "git.eeqj.de/sneak/rtnetmon/internal/monitor"

// Create a new monitor for one or two interfaces
mon := monitor.NewMonitor([]monitor.IfaceSpec{
    {Name: "eth0", Label: "Primary"},
    {Name: "wlan0", Label: "Backup"},
}, "/tmp/monitor.log")

// Configure timing parameters (optional - defaults are sensible)
mon.ICMPTimeout = 1 * time.Second
mon.PacketLossPings = 10
mon.PacketLossPeriod = 10 * time.Second

// Add hosts to monitor
mon.AddReachabilityHost("8.8.8.8")
mon.AddReachabilityHost("google.com")

mon.AddPacketLossHost("github.com")
mon.AddPacketLossHost("8.8.8.8")

mon.AddTCPHost("google.com:443")
mon.AddTCPHost("github.com:443")

// Run the monitor
ctx := context.Background()
if err := mon.Run(ctx); err != nil {
    log.Fatal(err)
}

License

WTFPL - Do What The Fuck You Want To Public License

Author

sneak@sneak.berlin