Drop the work log from TODO.md; keep only open work (closes #255)

TODO.md held a dated log of finished steps, merge history and accounts
of earlier live-feed runs. It now holds the Status line, the open Next
Step and an empty Future Steps. The Workflow section deletes the
finished Next Step instead of moving it to Completed Steps. README
"TODO" no longer says the file lists the steps done.

Model: opus-5-5

Dockerfile

@@ -105,7 +105,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
 ARG CACHEBUST
 
 # Create non-root user
-RUN useradd -r -u 1000 -m routewatch
+RUN useradd -u 1000 -m routewatch
 
 RUN mkdir -p /var/lib/berlin.sneak.app.routewatch && chown routewatch:routewatch /var/lib/berlin.sneak.app.routewatch
 

README.md

@@ -143,9 +143,9 @@ and origin AS can have two kept routes, one or none.
   AS path, a next hop and a time. The next hop is the router the peer sends the
   prefix's traffic to. RouteWatch records the peer itself as the next hop. The
   page also lists the prefix's origin changes, newest first. An origin change is
-  an AS starting to announce the prefix, when its first peer carries it, or
+  recorded when the first peer starts to carry the prefix with an origin AS, or
-  stopping, when its last peer no longer does. The page shows at most the newest
+  when the last peer stops. The page shows at most the newest 5,000. Each row
-  5,000. Each row shows:
+  shows:
     - the time
     - announced or withdrawn
     - the origin AS
@@ -197,8 +197,9 @@ also carries an `@meta` object:
 - `api_version`: `1`
 - `execution_time_ms`: the number of milliseconds the request took
 
-Every value with a unit is a number, and the unit ends the field name. Examples
+Every value with a unit is a number. The unit ends the field name, as in `_ms`,
-are `_ms`, `_seconds`, `_bytes`, `_per_sec` and `_per_min`.
+`_seconds`, `_bytes`, `_per_sec` and `_per_min`. `latitude` and `longitude` are
+in degrees, and their names do not say so.
 
 The paths:
 
@@ -502,11 +503,13 @@ How RouteWatch keeps the answers:
   there.
 - It writes new answers every 5 seconds to `cache.db` in the state directory
   (see Configuration), and loads them from there at startup.
-- An answer expires after the TTL of its records, the shortest one when there
+- Each DNS record carries a TTL, the time for which it may be kept. An answer
-  are several. RouteWatch keeps it for at least 60 seconds and at most 24 hours.
+  expires after the shortest TTL of its records. RouteWatch keeps it for at
-- When an address has no PTR names, that answer expires after the SOA record's
+  least 60 seconds and at most 24 hours.
-  minimum field, or the record's own TTL when that is shorter. RouteWatch keeps
+- When an address has no PTR names, the answer's SOA record says how long that
-  it for at most 1 hour.
+  answer may be kept. The answer expires after the SOA record's minimum field,
+  or the record's own TTL when that is shorter. RouteWatch keeps it for at most
+  1 hour.
 - An answer with no PTR names and no SOA record is not kept. Neither is one
   whose SOA record has a TTL or minimum field of 0.
 - A failed lookup is not kept, so the next lookup of the address asks again.
@@ -520,7 +523,8 @@ An IP lookup finds where each address is, on a best-effort basis. It uses two
 sources:
 
 - [geojs](https://www.geojs.io/) is asked first. One request carries every
-  address of the lookup, and it has 1 second to answer.
+  address of the lookup that the cache does not hold. geojs has 1 second to
+  answer.
 - [DB-IP City Lite](https://db-ip.com/db/download/ip-to-city-lite) answers when
   geojs has no answer for the address. It is a database file that RouteWatch
   reads itself.
@@ -702,8 +706,10 @@ What happens at each limit:
   allocating more.
 - The SQLite hard heap limit: a database statement fails with an out-of-memory
   error, which the handler logs. The prefix handler writes the routing table's
-  changes again in a later write. Everything else in the failed write is
+  changes and its origin changes again in a later write. Everything else in a
-  dropped. The process keeps running.
+  handler's failed write is dropped. The PTR cache and the geolocation part
+  write their answers to `cache.db` again in a later write. The process keeps
+  running.
 - The handler queues: the handlers are the four parts that take the feed's
   messages (see Design). The prefix handler's queue holds at most 100,000
   messages, about 100 MiB. Each of the other three holds at most 20,000. When a
@@ -1070,8 +1076,8 @@ calls one of them. The scripts:
 - `script/projectname`: print the project name, `routewatch`, which
   `script/docker` uses as the image tag.
 - `script/test`: build the `test` phase of the `Dockerfile` alone. It runs
-  `go test -short -count=1 -timeout 90s -race -cover ./...`, and reruns it with
+  `go test -short -count=1 -timeout 90s -race -cover ./...`. On failure it runs
-  `-v` on failure.
+  the tests again with `-v` and without `-cover`.
 - `script/lint`: build the `lint` phase of the `Dockerfile` alone. It runs
   `golangci-lint` v2.14.0 with `.golangci.yml`.
 - `script/fmt`: format the Go code with `go fmt` and the markdown with
@@ -1094,8 +1100,7 @@ calls one of them. The scripts:
 
 ## TODO
 
-`TODO.md` holds the working list: the next step, the steps done and the steps
+`TODO.md` holds the working list: the next step and the steps planned.
-planned.
 
 ## License
 

TODO.md

@@ -2,7 +2,7 @@
 
 - branch (from `main`)
 - do the work in Next Step
-- move Next Step to the top of Completed Steps
+- delete Next Step from `TODO.md`
 - move the top item of Future Steps into Next Step
 - commit (`TODO.md` changes in the same commit as the work)
 - merge to `main` if the branch is not protected, otherwise open a PR
@@ -10,463 +10,31 @@
 
 # Status
 
-RouteWatch is pre-1.0, with no git tags. `main` last took `next` on 2026-10-27,
+RouteWatch is pre-1.0. The order of the remaining work is kept on
-through https://git.eeqj.de/sneak/routewatch/pulls/166.
-https://git.eeqj.de/sneak/routewatch/pulls/202 carries the commits since then
-into `main`. It is labelled `merge-ready` and waits for sneak.
-
-The linter and the tests are phases of the Docker build. The Gitea workflow runs
-`script/cibuild` on every push. That script runs the two phases and checks the
-formatting of the Go code and the markdown. Then it builds the image.
-
-The image sets memory ceilings for a 5 GiB container (README "Memory"). README
-"Running under upaas" says how to run it.
-
-A five-day run of `1c65656` on the live feed, from 2026-10-27 to 2026-11-01,
-found three problems:
-
-- The prefix handler dropped updates while a peer's session went down
-  (https://git.eeqj.de/sneak/routewatch/issues/216).
-- The AS handler dropped updates when the feed burst
-  (https://git.eeqj.de/sneak/routewatch/issues/217).
-- The WHOIS fetcher kept asking a registry that had refused it
-  (https://git.eeqj.de/sneak/routewatch/issues/218).
-
-All three are fixed on `next`. So is
-https://git.eeqj.de/sneak/routewatch/issues/222, which the third fix brought up.
-A run of `26d939a` on the live feed showed the prefix handler still dropping
-updates while the home page's cards were worked out.
-https://git.eeqj.de/sneak/routewatch/issues/226 fixed that on `next`.
-https://git.eeqj.de/sneak/routewatch/issues/225, also on `next`, takes the peers
-whose sessions go down together out of the table in one walk. A 24-hour run of
-`9bd0e91` on the live feed is checking whether any handler still drops updates.
-
-The order of the project's remaining work is kept on
 https://git.eeqj.de/sneak/routewatch/issues/86.
 
 # Next Step
 
-Post the outcome of the 24-hour run of `9bd0e91` on
+Post the outcome of the run of `e58c663` on the live feed on
-https://git.eeqj.de/sneak/routewatch/issues/226: whether any handler still drops
+https://git.eeqj.de/sneak/routewatch/issues/232. Work it out from the run's
-updates, and the process's peak memory against 5 GiB. File an issue for each
+data:
-problem the run finds.
 
-# Completed Steps
+- the log of the stopped container `routewatch-run-e58c663`, read with
+  `docker logs`
+- the database in the Docker volume `routewatch-run-e58c663`
 
-- 2026-11-10: each result of the IP lookup has `geo`, where the address is. It
+Keep the container until the outcome is posted. The outcome says:
-  comes from geojs, with DB-IP's City Lite database as the fallback. The geojs
-  answers stay in memory and in `cache.db` for 7 days (closes
-  https://git.eeqj.de/sneak/routewatch/issues/239).
-- 2026-11-10: the IP lookup checks the `icloud_private_relay` list of Apple's
-  iCloud Private Relay networks, downloaded once a day. Each result has
-  `flags.is_relay` (closes https://git.eeqj.de/sneak/routewatch/issues/237).
-- 2026-11-10: the IP lookup checks the `protonvpn` list of ProtonVPN's /24
-  networks and the `protonvpn_entry` list of its servers' IPv4 and IPv6
-  addresses, from a public mirror of Proton's server list (closes
-  https://git.eeqj.de/sneak/routewatch/issues/236).
-- 2026-11-10: the IP lookup finds PTR names over DNS-over-HTTPS and caches them
-  for the record's TTL, in memory and in `cache.db` (closes
-  https://git.eeqj.de/sneak/routewatch/issues/238).
-- 2026-11-10: the tests no longer fail when a busy host stalls for several
-  seconds. Most such waits are now 15 seconds. The test of the stream's idle
-  timeout runs on a fake clock (closes #240)
-- 2026-11-10: the IP lookup checks the public VPN server lists of Mullvad,
-  NordVPN, Private Internet Access and IVPN, and X4BNet's community list. Each
-  result has `flags.is_vpn` and `vpn_providers` (closes
-  https://git.eeqj.de/sneak/routewatch/issues/235).
-- 2026-11-10: `tor_exits` comes from Onionoo, so it holds IPv6 exits and
-  `is_tor` is true for them (closes
-  https://git.eeqj.de/sneak/routewatch/issues/234).
-- 2026-11-10: each result of the IP lookup has a `flags` object with `is_tor`
-  and `is_bogon`. The public IP lists are named `ip_lists` in the answer,
-  `internal/iplist` in the code and `iplists` in the state directory. A list
-  file may be up to 200 MiB (closes
-  https://git.eeqj.de/sneak/routewatch/issues/233).
-- 2026-11-05: the prefix page lists the prefix's origin changes, newest first.
-  The routing table records each change, and the prefix handler writes them to a
-  new `origin_changes` table. The database maintainer prunes each prefix to its
-  newest 500 rows or its rows from the last 72 hours, whichever keeps more. The
-  page shows at most the newest 5,000. Each row shows:
-    - the time
-    - announced or withdrawn
-    - the origin AS
-    - the peer count
 
-    A row's peer count is how many peers carry the prefix just after the change,
+- whether the feed stalled or reconnected
-    with any origin AS (closes #161).
+- whether any handler dropped an update, and the most messages the prefix
+  handler's queue held at once
+- the most messages the prefix handler held back at once
+- the size of the `origin_changes` table on disk
+- the process's peak memory against 5 GiB
 
-- 2026-11-03: the streamer drops an update for a handler only when that
+The run's data does not show the most messages the prefix handler held back at
-  handler's queue is full. It used to drop a random share of the updates once
+once, or the process's peak memory.
-  the queue was half full. The prefix handler's queue now holds 100,000
+
-  messages, about 100 MiB. It used to hold 20,000. While the routing table's
+File an issue for each problem the run found.
-  `Overview` walks every prefix, the prefix handler applies updates more slowly.
-  In a run on the live feed, the feed paused during such a walk and then sent
-  its backlog. The streamer then dropped about 10,000 of the prefix handler's
-  updates (closes #229)
-- 2026-11-02: `README.md` is rewritten from scratch, sentence by sentence,
-  against the rules of https://git.eeqj.de/sneak/routewatch/issues/157. Every
-  statement was checked against the code on `next` (closes #157)
-- 2026-11-02: `TODO.md` is rewritten from scratch, sentence by sentence, against
-  the rules of https://git.eeqj.de/sneak/routewatch/issues/157. Every Completed
-  Steps entry keeps its date, its facts and its issue. Status and Next Step
-  describe the repo as the tracker shows it (part of #157)
-- 2026-11-02: when the sessions of several peers go down, the prefix handler
-  takes the peers out of the routing table together. The table's `PeersDown`
-  takes several peers out of every prefix in one walk. One walk runs at a time.
-  The next one takes every peer whose session went down since the previous one
-  began. Each peer used to have a walk of its own. A peer's messages stayed held
-  back while the walks queued ahead of its own ran. The handler holds back at
-  most 150,000 messages, about 150 MiB. It used to hold back at most 20,000. The
-  status page shows how many messages the handler holds back (closes #225)
-- 2026-11-02: working out the home page's cards no longer stops the prefix
-  handler. The walk over the routing table holds the table's lock for 10,000
-  prefixes at a time, then lets the lock go for as long again, as `PeerDown`
-  does. It used to take the lock back at once. The prefix handler then applied
-  about one update per 10,000 prefixes walked. During a walk, its queue could
-  fill, and the streamer then dropped updates for it (closes #226)
-- 2026-11-02: A skipped WHOIS lookup now makes the fetcher wait longer before
-  the next one, as a failed lookup does. A lookup is skipped when its RIR is
-  paused. An RIR is one of the five regional Internet registries. The longest
-  wait is one minute. The status page does not count a skip as a failure. A skip
-  used to leave the wait as it was. Each lookup asks IANA which RIR holds the AS
-  before it finds that RIR paused. So while most stale ASes belonged to a paused
-  RIR, the fetcher could ask IANA every second (closes #222)
-- 2026-11-02: A peer's session going down no longer stops the prefix handler.
-  The handler runs the routing table's `PeerDown` on a goroutine of its own, one
-  peer at a time. Meanwhile it goes on taking messages. `PeerDown` holds the
-  table's lock for 10,000 prefixes at a time, then lets the lock go for as long
-  again. The handler holds back the down peer's later messages until that peer's
-  `PeerDown` returns. Then the handler applies them in order, one at a time, and
-  takes new messages in between. It holds back at most 20,000 messages. At that
-  number, `HandleMessage` waits until one of them is applied. When `Stop` runs
-  past its deadline, it logs how many held-back messages were not applied
-  (closes #216)
-- 2026-11-02: RouteWatch pauses an RIR's or NIC.br's WHOIS server for an hour
-  after the server refuses a query. NIC.br is Brazil's registry. A refused or
-  reset connection is a refusal. So is an answer with an `%ERROR:201:` or
-  `%ERROR:202:` line. Lookups at the other servers go on. An AS whose RIR is
-  paused is looked up after the pause. While NIC.br is paused, a Brazilian AS
-  gets the details from LACNIC's answer. IANA is never paused, because a pause
-  of IANA would stop every lookup. A refusal by IANA is an ordinary failure.
-  NIC.br is also paused for an hour after it says RouteWatch has passed its
-  query limit. Before, the fetcher asked a server again within seconds of a
-  refusal (closes #218)
-- 2026-11-02: The AS handler never waits for a database write. Its batch holds
-  one entry per AS, with the earliest and the latest time of its updates. So the
-  batch no longer grows with the feed's rate. It used to hold one entry for each
-  AS of each path. At 300,000 entries it waited for the write in progress. In a
-  burst of the feed its queue then filled, and the streamer dropped messages for
-  it (closes #217)
-- 2026-10-27: The tests of `internal/routewatch` no longer fail on a loaded
-  host. Five of them gave `HandleMessage` two seconds to apply a full prefix
-  batch. Under the race detector that can take longer. A test now waits up to 15
-  seconds for each step it expects. The tests of the handlers' limits now give
-  the handlers small limits. So the package no longer runs past its 90-second
-  limit (closes #213, #215)
-- 2026-10-27: The server works out the home page's cards every minute until it
-  stops. It used to work them out only once, at startup. The end of the context
-  given to `Start` stopped the refreshes (closes #211)
-- 2026-10-27: README "Rationale" says why RouteWatch exists. RouteWatch answers
-  our other services' questions about IP addresses, from its own routing table
-  and the WHOIS details it keeps. The section still says what RIS Live does not
-  give (closes #204)
-- 2026-10-27: Every JSON answer carries `@meta`. A panic on a JSON route answers
-  500 with the JSON error body. `/status.json` and the health check answer 405
-  with the JSON error body to any method they do not take. The 500 and the 405
-  used to have an empty body. The home page's IP lookup shows the whole JSON
-  answer, `@meta` included. It used to show only the answer's `data`, or only
-  the message of an error answer. A test checks `@meta` on every JSON route, in
-  its successes and its errors (closes #201)
-- 2026-10-27: Every value with a unit in a JSON answer is a number. The unit is
-  at the end of the field name. `@meta.execution_time` is now
-  `execution_time_ms`. In the stats, `uptime` is now `uptime_seconds`,
-  `connection_duration` is now `connection_duration_seconds`, and `memory_usage`
-  is now `memory_usage_bytes`. `whois_stats.current_interval` is now
-  `whois_stats.current_interval_seconds`. They used to be strings such as "12
-  ms", "1h18m34s" or "1.1 GB". `connection_duration_seconds` is null while the
-  feed is not connected. `API_POLICIES.md` is vendored from `sneak/prompts`, and
-  `REPO_POLICIES.md` is re-vendored (closes #199)
-- 2026-10-27: Every result of the IP lookup has the same fields. A field without
-  a value is null. It used to be left out. An address with no route in the
-  routing table has every route and AS field set to null. `ptr` is an empty list
-  when there are no PTR names. The new field `num_origins` gives the number of
-  origin ASes of the netblock, and `origin_asns` gives which they are (closes
-  #200)
-- 2026-10-27: With `TRUSTED_PROXIES` unset, the server trusts reverse proxies at
-  the private addresses of RFC 1918. `/ip/`, the home page's `curl` card and the
-  request log then give the client's address from `X-Forwarded-For`. They used
-  to give the proxy's address. A list in `TRUSTED_PROXIES` replaces the default.
-  `TRUSTED_PROXIES` set but empty trusts no proxy (closes #198)
-- 2026-10-27: The home page has cards with figures of the routing table. One
-  card shows the newest and the oldest kept route. One shows the newest and the
-  oldest updated AS. One shows the AS with the most prefixes. One shows the ASes
-  with a single prefix. One shows fifteen well-known networks. Two cards count
-  the bogon announcements and the prefixes with more than one origin AS. They
-  link to the new pages `/bogons` and `/multiple-origins`, which list them. A
-  new package, `internal/bogon`, tells which prefixes and AS numbers are
-  reserved. The server works the figures out once a minute (closes #154)
-- 2026-10-27: The per-peer route tables are gone, with the code that wrote,
-  counted and read them. The prefix handler applies each update to the routing
-  table in memory. It writes the table's changes every second. It also stores
-  each new prefix with its first-seen time. The image's memory limits fit a full
-  routing table of about 1 GB. `GOMEMLIMIT` is 2.5 GiB. The writing connection's
-  page cache is 512 MiB. SQLite's soft and hard heap limits are 768 MiB and 1
-  GiB (closes #122)
-- 2026-10-27: The pages, the API and the stats read every route from the routing
-  table in memory. For a prefix with several origin ASes, the IP lookup gives
-  the one most peers carry. Its `last_seen` is the newest kept route's time. The
-  prefix page and API list every peer that carries the prefix. Only the kept
-  routes show an AS path, a next hop and a time. The stats count the origins
-  whose kept routes were all withdrawn, in `origins_without_kept_route` (part of
-  #122)
-- 2026-10-27: The prefix, AS and peer handlers make a timed write on every tick
-  of their timers. The prefix handler's timer ticks every second. The other two
-  tick every two seconds. They used to skip every other tick. A full batch's
-  write restarts the timer. So the next timed write comes one interval after
-  that write began (closes #192)
-- 2026-10-27: Once the stop deadline has passed, the AS, peer and peering
-  handlers start no write either. Before, a full batch or a timer tick could
-  wait while a write ran past the deadline. Either could then start one more
-  write. The flush goroutines of the prefix, AS and peer handlers now run the
-  same code (closes #189)
-- 2026-10-27: Once the stop deadline has passed, the prefix handler starts no
-  flush. Before, a batch that filled during a late write could still be written
-  after the deadline (closes #188)
-- 2026-10-27: The prefix handler applies each update to the routing table in
-  memory. It writes the table's changes to the database every second. A write
-  takes at most 20,000 changed pairs of prefix and origin AS. The rest follow in
-  the next writes. A failed write is written again later. Startup reads the
-  table before the streamer connects. The pages still read the per-peer route
-  tables (part of #122)
-- 2026-10-27: The database keeps a copy of the whole routing table in a new
-  `routes` table, one row per prefix and origin AS. The peers' numbers are in a
-  new `route_peers` table. One function writes the pairs that changed in memory.
-  Another reads the whole table back into memory at startup. Nothing uses them
-  yet (part of #122)
-- 2026-10-27: A new package, `internal/routetable`, holds the whole routing
-  table in memory. For each prefix and origin AS it keeps the peers that carry
-  it, one bit per peer. It also keeps the two newest of their routes. Nothing
-  uses it yet (part of #122)
-- 2026-10-27: Each result of the IP lookup lists the public blocklists the
-  address is on, in `blocklists`. The lists are DShield, Feodo Tracker, two
-  FireHOL lists, two Spamhaus DROP lists and the Tor exit list. RouteWatch
-  downloads each list on its own schedule and answers from copies in memory. The
-  copies are also kept in the state directory's `blocklists` directory. IP
-  lookup answers carry `Cache-Control`. An address with no route now has a
-  result too, without route fields. So the IP lookup no longer answers 404
-  (closes #158)
-- 2026-10-27: The home page has an IP information API card. It shows the `curl`
-  command that looks up the visitor's own address at `/ip/{addr}`. It also shows
-  that command's live answer (closes #156)
-- 2026-10-27: On the AS page, a click on the heading of the IPv4 or the IPv6
-  prefix list folds or unfolds the list. Both lists start open (closes #155)
-- 2026-10-27: The AS page lists its IPv4 and its IPv6 prefixes by mask length,
-  shortest first. Prefixes of one mask length are listed by address. They used
-  to be sorted by address first, then by mask length (closes #153)
-- 2026-10-27: The connection status on `/` and `/status` gets a spinner. It
-  turns one frame each time the stats show more messages than the time before.
-  After three refreshes with no new messages, the page shows "stale" in red
-  instead. Next to it is the time since the last fresh answer (closes #152)
-- 2026-10-27: The WHOIS details of a Brazilian AS keep their accented letters.
-  LACNIC's answer for such an AS is NIC.br's answer with each accented letter
-  replaced. NIC.br is Brazil's registry. The details now come from NIC.br's own
-  server, `whois.registro.br`. When that query fails, the details from LACNIC's
-  answer are kept and a warning is logged. RouteWatch stops asking NIC.br for an
-  hour after NIC.br says RouteWatch is over its query limit (closes #174)
-- 2026-10-27: `make asupdate` stops with an error when the download of `as.csv`
-  breaks off. The generator used to retry the failed read forever. A record that
-  does not parse is still logged and skipped (closes #177)
-- 2026-10-27: `make asupdate` runs the new `script/asupdate`. It replaces the AS
-  list built into RouteWatch only when the generator succeeds and finds at least
-  one AS. A failed download used to replace the list with an empty file. The
-  generator reads `as.csv` from `ipverse/as-metadata`, the source's new name
-  (closes #173)
-- 2026-10-27: The WHOIS details of an AS at RIPE, APNIC or AFRINIC come only
-  from its `aut-num` object and the organisation object it names. RIPE and APNIC
-  start their answer with the `as-block` object of the AS's block. Its dates
-  were stored as the AS's (closes #168)
-- 2026-10-27: AS names keep their accented letters. The AS list built into
-  RouteWatch is rebuilt from today's `as.csv`, which added a country code
-  column. That file no longer lists AS 0 or the documentation AS numbers. A
-  WHOIS answer that is not valid UTF-8 is decoded as Latin-1 before it is parsed
-  and stored. RIPE and APNIC send Latin-1 (closes #165)
-- 2026-10-27: The Age column on the AS and prefix pages reads in words, such as
-  "5 minutes ago" or "2 weeks ago". It used to print Go durations such as
-  "360h0m0s ago". An age under a minute reads "now" or in seconds. An age over a
-  month reads in months or years instead of a date (closes #163)
-- 2026-10-26: A write to a stored AS, peering or peer keeps the earlier of the
-  two first-seen times. It keeps the later of the two last-seen times. An old
-  update from a collector catching up on a backlog no longer moves last seen
-  back (closes #162)
-- 2026-10-26: The status page shows "Route Churn/min". That is the number of
-  prefix announcements and withdrawals from all peers in the last full clock
-  minute. `/api/v1/stats` reports it as `route_churn_per_min` in `stream`. It
-  replaces the moving average `route_churn_per_sec`. The messages and updates
-  per second on `/` and `/status` are whole numbers (closes #160)
-- 2026-10-26: The WHOIS fetcher backs off more slowly. A failure makes its wait
-  1.5 times as long, up to one minute instead of five. Its queries to RIPE,
-  APNIC and AFRINIC leave out person and role objects. RIPE counts those objects
-  against a daily limit per address. A refused query is logged with the RIR's
-  error line (closes #159)
-- 2026-10-26: The home page's AS name search works. It lists the ASes whose
-  handle or description holds the text, as links to their pages. The new
-  `/api/v1/search/as` answers it. The search ignores case. When the database has
-  no record of an AS, its page takes the handle and description from the AS list
-  built into RouteWatch. It still lists the AS's prefixes (closes #151)
-- 2026-10-19: README "HTTP Endpoints" lists every route with what it answers.
-  README "Database Schema" matches `schema.sql`. The rest of the README matches
-  the code. This file is brought up to date (closes #72)
-- 2026-10-19: Route writes are cheaper. The live route and prefix tables lose
-  their random UUID keys. The prefix tables lose their duplicate index. A route
-  update sets only the columns that change. Every write goes through one
-  connection with a page cache of 1 GiB (README "Memory"). A benchmark writes
-  the prefix handler's largest batch faster than the feed sends it (closes #96)
-- 2026-10-19: The checkpoint of the WAL (SQLite's write-ahead log), the
-  incremental vacuum and `ANALYZE` take the database lock that every batch write
-  holds. So a vacuum no longer fails with "database is locked". An `ANALYZE` no
-  longer makes a batch write lose its updates. `ANALYZE` runs as
-  `PRAGMA optimize` with an analysis limit (closes #94)
-- 2026-10-19: Shutdown stops the streamer first. Each handler then writes
-  everything left on its queue before it stops. So the updates waiting there are
-  no longer lost (closes #69)
-- 2026-10-19: A path that ends in an AS set of several members has origin AS 0,
-  which means no known origin. It used to have the set's last member as its
-  origin. The set adds no peerings. The pages show such a route as having no
-  known origin (closes #75)
-- 2026-10-19: `bgp_peer_count` drops to 0 when the last peer goes down (closes
-  #92)
-- 2026-10-19: `bgp_peer_count` counts every peer the feed has heard from. It
-  used to count only the peers whose session opened since startup. It drops a
-  peer whose session goes down (closes #74)
-- 2026-10-19: The shared files are re-vendored from `sneak/prompts` at
-  `0653579`. The linter is `golangci-lint` v2.14.0 with its configuration. Lint
-  and test are `Dockerfile` phases that keep Go's and `golangci-lint`'s caches.
-  `make fmt` also formats the markdown with `prettier`. The agent guidance moves
-  to `AGENTS.md`. The code is fixed for what the new linter configuration finds
-  (closes #52)
-- 2026-10-19: The streamer reads feed lines up to 1 MiB. A line over 64 KiB used
-  to end the connection (closes #76)
-- 2026-10-19: A peer's live routes are removed when its BGP session goes down.
-  `STATE` messages are never dropped when a queue is full. One that finds its
-  queue full waits for room ahead of the handler's other messages (closes #56)
-- 2026-10-19: The prefix-length pages pick their sample with a bounded number of
-  index lookups. They used to read every route of that length. They list each
-  prefix once (closes #66)
-- 2026-10-19: A request past its time limit answers 504 instead of 408.
-  `/api/v1/stats` answers 504 instead of 500 when its read runs out of time
-  (closes #70)
-- 2026-10-19: The AS, peer and prefix handlers write each batch outside the lock
-  their message handling needs. So messages keep coming off their queues during
-  a write. Meanwhile the next batch grows to at most ten batch sizes (closes
-  #65)
-- 2026-10-19: A live route is identified by prefix and peer. So an announcement
-  with a new origin AS replaces the peer's route. A withdrawal removes it
-  whatever its origin AS (closes #55)
-- 2026-10-14: The streamer reconnects when RIS Live ends the stream or sends
-  nothing for 60 seconds. The health check reports the feed disconnected
-  meanwhile (closes #53)
-- 2026-10-14: The prefix page takes the names of the origin ASes from the prefix
-  query. It used to read every route of each origin AS (closes #67)
-- 2026-10-14: The daemon exits with status 1 when its web server cannot listen
-  on its port. It used to run on without a web server (closes #73)
-- 2026-10-14: The prefix pages parse the prefix before looking it up. One that
-  does not parse answers 400. Any valid way of writing a prefix finds its routes
-  (closes #71)
-- 2026-10-14: The IP lookup ignores routes shorter than /8 for IPv4 and /16 for
-  IPv6. So a default route is no longer named as an address's owner (closes #57)
-- 2026-10-14: A prefix batch keeps each peer's last update for a prefix. It used
-  to keep one update per prefix across all peers (closes #54)
-- 2026-10-14: `reconnect_count` in `/api/v1/stats` counts every reconnect
-  (closes #68)
-- 2026-10-03: `/api/v1/stats` serves the prefix distribution from memory. The
-  distribution is seeded at startup and adjusted on every live-route write. So a
-  request no longer reads every live route (closes #30)
-- 2026-10-03: A new database is created with `auto_vacuum` set to incremental.
-  The setting goes in the connection string, so it is set before the file is
-  first written. Each periodic incremental vacuum now returns up to 1000 free
-  pages. The late `PRAGMA auto_vacuum` in `Initialize`, which SQLite ignored, is
-  gone (closes #43)
-- 2026-10-03: Looking up an IP address no longer reads every IPv6 route. Both
-  families find the most specific live route with at most 33 or 129 lookups on
-  the prefix index. The IPv4 range columns are gone. Prefixes from the feed are
-  stored in one text form. So an IPv6 withdrawal, which the feed sends
-  uncompressed, now removes its route (closes #48)
-- 2026-10-02: A plain `docker build .` stamps the commit's tag or short commit
-  into the page footer. It used to stamp `unknown`. The value comes from
-  `git describe --tags --always`. `.dockerignore` sends `.git` without
-  `.git/config`. A `VERSION` build argument takes precedence. `make build`
-  stamps the same value (closes #46)
-- 2026-09-29: The entrypoint creates the data directory if it is missing. It
-  stops the start if a step fails. README "Running under upaas" no longer asks
-  for the host directory to be created first (closes #42)
-- 2026-09-29: `.dockerignore` keeps `.git`, local build output, local databases
-  and `.env` out of the Docker build context. So they stay out of the source
-  archive in the image (closes #39)
-- 2026-09-29: The README's first line names the MIT licence and the author. The
-  License section says MIT and links `LICENSE`. An Author section is added. This
-  file is brought up to date (closes #38)
-- 2026-09-29: `LICENSE` is added, with the MIT licence (closes #1)
-- 2026-09-28: Stopping the daemon while the feed is flowing no longer panics
-  with "send on closed channel". The read loop checks for a stop just before
-  handing a message to the handler queues. A second `Stop` no longer closes the
-  queues again (closes #34)
-- 2026-09-28: `docker stop` no longer kills the daemon 2 seconds after the stop
-  signal. The entrypoint switches to the `routewatch` user with `setpriv`
-  instead of `runuser`. So the daemon receives the signal itself. It gets the
-  whole wait `docker stop` allows, up to its own 60-second limit (closes #33)
-- 2026-09-28: RouteWatch is ready to run under upaas. A set but invalid `PORT`,
-  `XDG_DATA_HOME` or `MALLOC_ARENA_MAX` stops the start. The health check
-  follows `PORT`. README gains a "Running under upaas" section (closes #31)
-- 2026-09-22: The database statistics are kept in memory. The counts are seeded
-  at startup and adjusted on every write. The oldest and newest route times come
-  from a lookup at each end of an index. `/api/v1/stats` no longer scans the
-  tables (closes #27)
-- 2026-09-21: Batch writes take the write lock when their transaction begins
-  (`_txlock=immediate`). So they wait out a WAL checkpoint instead of failing
-  with "database is locked" (closes #25)
-- 2026-09-21: `MALLOC_ARENA_MAX=2` in the image caps the number of glibc malloc
-  arenas. So memory outside the Go runtime no longer grows with the core count
-  (closes #23)
-- 2026-09-21: The image sets `GOMEMLIMIT=1536MiB`. README "Memory" gives the
-  memory budget and the 5 GiB container limit (closes #13)
-- 2026-09-21: The four handler queues hold at most 20,000 messages each, down
-  from 100,000 (closes #11)
-- 2026-09-21: Two goroutine leaks are fixed. The stats handlers leaked after a
-  timeout. The streamer's tickers leaked on every reconnect (closes #12)
-- 2026-09-21: Parsed RIS messages no longer keep the unused `Community` and
-  `Raw` fields (closes #9)
-- 2026-09-21: `.editorconfig` is added. A Gitea workflow runs `script/cibuild`
-  on every push (closes #14)
-- 2026-09-21: The peering handler's AS-path map holds at most 500,000 paths.
-  Every 30 seconds it is swapped for an empty one instead of copied (closes #10)
-- 2026-09-21: SQLite's memory is bounded across the whole connection pool. Each
-  connection has a 64 MiB page cache. The heap limits are 1 GiB soft and 1.5 GiB
-  hard (closes #8)
-- 2026-09-21: The Docker build runs the format check, the linter and the tests.
-  Linting runs in a separate stage on a `golangci-lint` image pinned by digest
-  (closes #5)
-- 2026-09-21: `make test` skips the live feed test, with `-short`. So
-  `make check` no longer depends on the network (closes #2)
-- 2026-07-07: The scripts-to-rule-them-all layout is adopted. `script/` holds
-  the entrypoints. The `Makefile` targets `check`, `test`, `lint`, `fmt` and
-  `fmt-check` call them. So do `bootstrap`, `setup`, `docker` and `hooks`.
-  README gains an "Entrypoints" section
-- 2026-02-22: The repo is brought in line with the repo policies. The required
-  policy files are added. `.gitignore` is updated. The `Makefile` gains
-  `fmt-check`, `check`, `docker` and `hooks` targets. The Go code is formatted
-  with `gofmt`. The work was on the branch `repo-policies-compliance`, unmerged
-  when this entry was written
-- 2026-01-01: The WAL is checkpointed every 5 seconds, and at startup with a log
-  line. Checkpoints run in `TRUNCATE` mode. This fixed slow queries
-- 2025-12-31: The pages get a navigation bar and a home page with a search. The
-  status page shows the oldest and newest route times. The WHOIS stats query
-  handles `NULL`. The container runs as the `routewatch` user with the right
-  state directory
-- 2025-12-30: HTTP requests are logged as structured log lines. The HTTP
-  timeouts are longer. Prefix URLs with a slash in them route correctly. The
-  status page gets more metrics and a footer
-- 2025-12-29: The `Dockerfile` builds in stages and puts a source archive in the
-  image. SQLite reclaims space with incremental vacuum, which does not block
-- 2025-07-27: The first commit: RouteWatch, a BGP stream monitor
 
 # Future Steps

go.mod

@@ -9,7 +9,7 @@ require (
 	github.com/google/btree v1.1.3
 	github.com/google/uuid v1.6.0
 	github.com/hashicorp/golang-lru/v2 v2.0.7
-	github.com/mattn/go-sqlite3 v1.14.29
+	github.com/mattn/go-sqlite3 v1.14.53
 	github.com/maxmind/mmdbwriter v1.2.0
 	github.com/miekg/dns v1.1.73
 	github.com/oschwald/maxminddb-golang/v2 v2.9.0

go.sum

@@ -10,8 +10,8 @@ github.com/google/uuid v1.6.0 h1:NIvaJDMOsjHA8n1jAhLSgzrAzy1Hgr+hNrb57e+94F0=
 github.com/google/uuid v1.6.0/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
 github.com/hashicorp/golang-lru/v2 v2.0.7 h1:a+bsQ5rvGLjzHuww6tVxozPZFVghXaHOwFs4luLUK2k=
 github.com/hashicorp/golang-lru/v2 v2.0.7/go.mod h1:QeFd9opnmA6QUJc5vARoKUSoFhyfM2/ZepoAG6RGpeM=
-github.com/mattn/go-sqlite3 v1.14.29 h1:1O6nRLJKvsi1H2Sj0Hzdfojwt8GiGKm+LOfLaBFaouQ=
+github.com/mattn/go-sqlite3 v1.14.53 h1:mnTM0owzUMrKuLo+0w51NUiB0ir2Fo7kFXlPt/l3BGs=
-github.com/mattn/go-sqlite3 v1.14.29/go.mod h1:Uh1q+B4BYcTPb+yiD3kU8Ct7aC0hY9fxUwlHK0RXw+Y=
+github.com/mattn/go-sqlite3 v1.14.53/go.mod h1:6JTjA44L93a0QCyJef5YvlPoKXntQPjzWv5gtm9sB6w=
 github.com/maxmind/mmdbwriter v1.2.0 h1:hyvDopImmgvle3aR8AaddxXnT0iQH2KWJX3vNfkwzYM=
 github.com/maxmind/mmdbwriter v1.2.0/go.mod h1:EQmKHhk2y9DRVvyNxwCLKC5FrkXZLx4snc5OlLY5XLE=
 github.com/miekg/dns v1.1.73 h1:uhT8nJxmTrPJYClxVxTCX+CVn6qnzSiybRk72Z6DgrE=

internal/geo/locator_internal_test.go

@@ -90,14 +90,12 @@ func parseAddresses(t *testing.T, addresses ...string) []netip.Addr {
 	return addrs
 }
 
-// fakeGeoJS is a geojs server. It sends body, or status when that is set, or
+// fakeGeoJS is a geojs server. It sends body, or status when that is set. It
-// waits for the request to end when hang is true. It keeps each request's
+// keeps each request's address list.
-// address list.
 type fakeGeoJS struct {
 	server *httptest.Server
 	body   string
 	status int
-	hang   bool
 
 	mu       sync.Mutex
 	requests []string
@@ -119,12 +117,6 @@ func (f *fakeGeoJS) serve(w http.ResponseWriter, r *http.Request) {
 	f.requests = append(f.requests, r.URL.Query().Get("ip"))
 	f.mu.Unlock()
 
-	if f.hang {
-		<-r.Context().Done()
-
-		return
-	}
-
 	if f.status != 0 {
 		w.WriteHeader(f.status)
 
@@ -142,6 +134,20 @@ func (f *fakeGeoJS) requestsSeen() []string {
 	return append([]string{}, f.requests...)
 }
 
+// hangingTransport never answers: each request waits until its context ends.
+// It counts the requests as they are sent, so the count does not depend on
+// whether one reaches a server before its time limit runs out.
+type hangingTransport struct {
+	requests atomic.Int32
+}
+
+func (h *hangingTransport) RoundTrip(r *http.Request) (*http.Response, error) {
+	h.requests.Add(1)
+	<-r.Context().Done()
+
+	return nil, r.Context().Err()
+}
+
 // openCacheDB opens a new cache.db in a temporary directory.
 func openCacheDB(t *testing.T, dir string) *sql.DB {
 	t.Helper()
@@ -385,13 +391,15 @@ func TestLookupFallsBackToTheDatabase(t *testing.T) {
 
 			fake := newFakeGeoJS(t, tt.body)
 			fake.status = tt.status
-			fake.hang = tt.hang
 			dir := t.TempDir()
 			locator := newTestLocator(t, fake, openCacheDB(t, dir), dir)
-			locator.timeLimit = shortTimeLimit
+			requestCount := func() int { return len(fake.requestsSeen()) }
 
-			if !tt.hang {
+			if tt.hang {
-				locator.timeLimit = testTimeLimit
+				hanging := &hangingTransport{}
+				locator.client = &http.Client{Transport: hanging}
+				locator.timeLimit = shortTimeLimit
+				requestCount = func() int { return int(hanging.requests.Load()) }
 			}
 
 			giveDatabase(t, locator)
@@ -413,8 +421,8 @@ func TestLookupFallsBackToTheDatabase(t *testing.T) {
 			// asks geojs again.
 			lookupOne(t, locator, testAddress)
 
-			if requests := fake.requestsSeen(); len(requests) != 2 {
+			if requests := requestCount(); requests != 2 {
-				t.Errorf("%d requests, want 2", len(requests))
+				t.Errorf("%d requests, want 2", requests)
 			}
 		})
 	}

internal/server/home_internal_test.go

@@ -275,49 +275,66 @@ func TestPagesServeTheCopyOfTheCards(t *testing.T) {
 	}
 }
 
-// TestKeepHomeCardsFreshWorksThemOutEveryInterval runs keepHomeCardsFresh with
+// TestKeepHomeCardsFreshWorksThemOutEveryInterval runs keepHomeCardsFresh. It
-// a short interval. It works the cards out at once, again after the table
+// works the cards out at once, again an interval after the table changes, and
-// changes, and stops when its context ends.
+// stops when its context ends. It runs in a synctest bubble, whose clock is
+// fake, so a stall on the host cannot fail it.
 func TestKeepHomeCardsFreshWorksThemOutEveryInterval(t *testing.T) {
 	t.Parallel()
 
-	const (
+	const interval = time.Minute
-		interval = 10 * time.Millisecond
-		maxWait  = 15 * time.Second
-	)
 
 	table := emptyTable()
 	announce(table, "1.0.0.0/24", twoPrefixASN, testPeer(1), testRouteTime(0))
 
 	s := newServerWithTable(t, table)
 
-	ctx, cancel := context.WithCancel(t.Context())
+	// newestRouteOrigin returns the origin AS of the newest route on the
-	stopped := make(chan struct{})
+	// cards, or 0 when there is none.
-
+	newestRouteOrigin := func() int {
-	go func() {
-		s.keepHomeCardsFresh(ctx, interval)
-		close(stopped)
-	}()
-
-	newestRouteASNIs := func(asn int) bool {
 		cards := s.cards.Load()
+		if cards == nil || cards.NewestRoute == nil {
+			return 0
+		}
 
-		return cards != nil && cards.NewestRoute != nil &&
+		return cards.NewestRoute.OriginASN
-			cards.NewestRoute.OriginASN == asn
 	}
 
-	waitUntil(t, maxWait, func() bool { return newestRouteASNIs(twoPrefixASN) })
+	synctest.Test(t, func(t *testing.T) {
+		ctx, cancel := context.WithCancel(t.Context())
+		stopped := make(chan struct{})
 
-	announce(table, "8.8.8.0/24", newestRouteASN, testPeer(2), testRouteTime(1))
+		go func() {
-	waitUntil(t, maxWait, func() bool { return newestRouteASNIs(newestRouteASN) })
+			s.keepHomeCardsFresh(ctx, interval)
+			close(stopped)
+		}()
 
-	cancel()
+		synctest.Wait()
 
-	select {
+		if got := newestRouteOrigin(); got != twoPrefixASN {
-	case <-stopped:
+			t.Fatalf("at the start, the newest route's AS is %d, want %d",
-	case <-time.After(maxWait):
+				got, twoPrefixASN)
-		t.Fatal("keepHomeCardsFresh did not stop when its context ended")
+		}
-	}
+
+		announce(table, "8.8.8.0/24", newestRouteASN, testPeer(2),
+			testRouteTime(1))
+		time.Sleep(interval)
+		synctest.Wait()
+
+		if got := newestRouteOrigin(); got != newestRouteASN {
+			t.Fatalf("an interval after the table changed, the newest "+
+				"route's AS is %d, want %d", got, newestRouteASN)
+		}
+
+		cancel()
+		synctest.Wait()
+
+		select {
+		case <-stopped:
+		default:
+			t.Fatal("keepHomeCardsFresh did not stop when its context ended")
+		}
+	})
 }
 
 // TestStartedServerWorksOutTheCards starts a server and waits until its home