Run every lint in a container via Dockerfile.lint (closes #40)

script/lint runs the linter directly when it is already inside a
container and otherwise builds Dockerfile.lint, so the linter never runs
on a developer host. That closes three host-only mechanisms: the result
cache golangci-lint keys on file content rather than location, which
produced a confirmed false green and findings reported against other
checkouts; the host-global $TMPDIR/golangci-lint.lock, which fails a run
in a way no caller can distinguish from findings; and host/container
version skew, which hid thirteen findings on one repo.

Detection is on LINT_IN_CONTAINER=1, set by every Dockerfile, and on
nothing else. The two directions are not symmetric: a false negative
inside a container attempts a nested docker build, finds no daemon and
fails loudly, while a false positive on a host silently lints there,
which is the defect this issue exists to kill. /.dockerenv is therefore
rejected even as a fallback -- measured absent inside BuildKit RUN steps
and present on any host that is itself a container, so it fails in both
directions and one of them is the dangerous one.

Nothing else changes shape. The Dockerfile still runs make check,
script/check still runs test, lint and fmt-check, script/cibuild is
still a single docker build with CHECK_EPOCH and VERSION, and the Go
multistage lint stage and its COPY --from=lint ordering dependency
survive with ENV LINT_IN_CONTAINER=1 added. Dockerfile.lint is the
standalone developer-host path and carries the same CHECK_EPOCH guard,
with the ARG below the dependency layer so only the lint re-runs.

The script/bootstrap golangci-lint install and the per-checkout
GOLANGCI_LINT_CACHE/TMPDIR wrapper are deleted as superseded. Neither
has a caller left. A JS repo's yarn install stays: the rule is that no
lint verdict may come from a host invocation, not that no linter binary
may exist there, and in a repo whose formatter is its linter the
formatter necessarily runs on the host.

golangci-lint config verify is kept, on measurement. Under the pinned
v2.12.2 a bogus top-level key and a bogus key under linters.settings.lll
both pass `golangci-lint run` with exit 0 and `0 issues` while config
verify exits 3 and names them; an unknown linter name fails run and
passes config verify. It needs no network: every case reproduced
byte-identically under `docker run --network none`, in a container where
`getent hosts golangci-lint.run` exits 2.

Comment blocks were cut hard across every file this unit touches.
.dockerignore drops from 67 comment lines to 28, script/cibuild from 17
to 12, script/docker from 18 to 12, and prompts/REPO_POLICIES.md from
1182 lines to 907. What remains says why a line is load-bearing; the
discovery narratives are gone.

.dockerignore

@@ -1,75 +1,37 @@
-# Docker matches this file with moby/patternmatcher: Go filepath.Match
-# semantics plus a `**` extension, compiled to a regexp. Plain
-# filepath.Match has no `**` at all. What follows from that: `*` does not
-# cross `/`, and a pattern without a leading `**/` is anchored at the
-# build-context root. Every depth-independent pattern therefore needs the
-# `**/` prefix — without it `config/.env` and `certs/server.key` still
-# ship while the file reads as solved.
+# .dockerignore does NOT use .gitignore semantics. Docker matches with
+# moby/patternmatcher: filepath.Match plus `**`, so `*` does not cross
+# `/` and an unprefixed pattern is anchored at the context root. Every
+# depth-independent pattern therefore needs `**/`, or `config/.env` and
+# `certs/server.key` still ship while the file reads as solved. Only
+# genuinely root-anchored entries go unprefixed. Never transplant these
+# into .gitignore, where `**/` is wrong.
 #
-# Root-anchored entries are for paths that occur exactly once, at the
-# context root. A host-built binary is the usual case, and it must be
-# written anchored: `/myapp`, never `**/myapp`. The prefixed form also
-# matches `cmd/myapp/`, which deletes the package directory from the
-# context. In-repo agent scratch is the other case, for the same reason
-# — with the caveat recorded at that entry: anchoring is exact only
-# where agents run at the repo root, and a repo where they do not must
-# add its own entries.
+# Matching is case-sensitive, so secrets use character ranges rather
+# than an ALL-CAPS twin, which would still miss `Server.Key`.
 #
-# Matching is case-sensitive, so `**/*.key` does not match
-# `certs/SERVER.KEY`, which is reachable on the case-insensitive
-# filesystems most laptops use. Adding an ALL-CAPS twin per pattern is
-# not the fix: it still misses `Server.Key` while reading as though case
-# were handled. Character ranges cover every spelling in one line, so
-# every secret name below is written that way — including the
-# extensionless SSH keys and `.envrc`, because on those same
-# case-insensitive filesystems direnv reads `.ENVRC` and ssh reads
-# `ID_RSA`.
-#
-# `**/*.[eE][nN][vV]` also excludes a committed env template such as
-# `example.env`. If the build genuinely needs one, re-include it with a
-# negation after the pattern: `!docs/example.env`.
-#
-# Extend this file with the repo's own host-built artifacts (compiled
-# binaries, test binaries, coverage output); those are per-repo and
-# belong here because a host build otherwise drops them into the
-# context.
+# Extend with this repo's own host-built artifacts, written anchored:
+# `/myapp`, never `**/myapp`, which also matches `cmd/myapp/` and
+# deletes the package directory from the context.
 
-# Repository metadata: exactly one, at the context root. Excluding it
-# means `git describe` cannot run in any build stage, and it fails
-# quietly there rather than erroring, so a version embedded that way
-# comes out empty. Compute the version on the host and pass it in with
-# `--build-arg VERSION=...`; see the version rule in REPO_POLICIES.md.
+# Excluding .git means `git describe` cannot run in any build stage and
+# fails quietly there; pass the version in with --build-arg VERSION.
 .git
 
-# In-repo agent scratch: a directory holding a full additional checkout
-# of the repo for each in-flight agent. Anchored because it occurs
-# exactly once *where agents run at the repo root*, which is the
-# convention this file assumes; the `**/` form would also match any
-# nested directory of that name and delete it from the build.
-#
-# KNOWN GAP, and it is not hypothetical: the directory is created in the
-# agent's working directory. If agents in this repo run in
-# subdirectories — a monorepo with a per-service agent, say — then
-# `services/api/.claude/` is NOT excluded by the line below and still
-# reaches the build context and the image, which is the exposure this
-# entry exists to close. A repo in that shape adds its own anchored
-# entries (`/services/api/.claude`), or `**/.claude` after confirming no
-# legitimately named nested directory would be caught.
-#
-# Not case-folded, unlike the secret patterns below: tooling creates
-# this directory in exactly one spelling, so a folded pattern would add
-# no coverage.
+# Agent scratch: one full checkout of the repo per in-flight agent.
+# Anchored because it occurs once where agents run at the repo root.
+# KNOWN GAP: a repo running agents in subdirectories still ships
+# `services/api/.claude/` and must add its own anchored entry.
 .claude
 
-# Environment files. `*.env` covers both the bare `.env` name (`*` matches
-# the empty string) and the `prod.env` convention.
+# Environment files. `*.env` covers bare `.env` and the `prod.env`
+# convention. Re-include a committed template with a negation if the
+# build needs one: `!docs/example.env`.
 **/*.[eE][nN][vV]
 **/.[eE][nN][vV].*
 **/.[eE][nN][vV][rR][cC]
 
-# Private keys and the bundles that carry them. Public certificates
-# (*.crt, *.cer) are deliberately absent: they are not secrets and are
-# sometimes a legitimate build input.
+# Private keys and the bundles carrying them. Public certificates
+# (*.crt, *.cer) are deliberately absent: they are legitimate inputs.
 **/*.[pP][eE][mM]
 **/*.[kK][eE][yY]
 **/*.[pP]12
@@ -86,8 +48,7 @@
 **/.DS_Store
 **/Thumbs.db
 
-# Editor state. Never a build input, and it churns under a developer's
-# hands, so it invalidates COPY for reasons unrelated to the source.
+# Editor state: never a build input, and it churns COPY.
 **/*.swp
 **/*.swo
 **/*~

Dockerfile

@@ -3,35 +3,26 @@ FROM node@sha256:e4bf2a82ad0a4037d28035ae71529873c069b13eb0455466ae0bc13363826e3
 
 WORKDIR /app
 
-# script/bootstrap installs all prerequisites (make via apk here; node
-# and yarn are already in the base image, so those steps are skipped).
-# Dependency manifests are copied first so the bootstrap layer is
-# cached until they change.
+# Makes script/lint run the linter directly rather than building
+# Dockerfile.lint, which would need a docker daemon here.
+ENV LINT_IN_CONTAINER=1
+
+# script/bootstrap installs all prerequisites. Manifests are copied
+# first so that layer stays cached until dependencies change.
 COPY script/ script/
 COPY package.json yarn.lock ./
 RUN script/bootstrap
 
 COPY . .
 
-# CHECK_EPOCH is a per-invocation nonce supplied by script/cibuild and
-# script/docker. Without it an unchanged tree serves this layer from
+# CHECK_EPOCH is a per-invocation nonce from script/cibuild and
+# script/docker; without it an unchanged tree serves this layer from
 # cache and the build reports a green it never ran. ARG is stage-scoped,
-# so it must be redeclared in every stage that runs checks. The guard
-# makes a bare `docker build .` fail loudly instead of silently reusing
-# the empty (and therefore stable) cache key. Expand the value into the
-# command so the cache miss does not depend on BuildKit's handling of an
-# unreferenced ARG. Both the guard and the check RUN reference the value,
-# so both are value-keyed: there are two independent invalidation points
-# here, not one. Keep both.
+# so declare it in every stage that runs checks. The guard fails a bare
+# `docker build .`, which would otherwise reuse the empty (and therefore
+# stable) cache key. The value is also expanded into the check command,
+# so the cache miss does not depend on BuildKit's handling of an
+# unreferenced ARG; keep both references.
 ARG CHECK_EPOCH
 RUN [ -n "$CHECK_EPOCH" ] || exit 1
-
-# The individual non-lint checks, NOT `make check`. Lint is deliberately
-# absent here: `script/lint` is itself a `docker build` (of
-# Dockerfile.lint), so running `make check` in this image would attempt
-# a docker build inside a build step, where there is no daemon. Putting
-# `make check` back reintroduces exactly that recursion. Lint is not
-# skipped — script/cibuild runs script/lint first, in its own container,
-# before this build starts.
-RUN echo "check epoch: ${CHECK_EPOCH}" && script/test
-RUN script/fmt-check
+RUN echo "check epoch: ${CHECK_EPOCH}" && make check

Dockerfile.lint

@@ -1,41 +1,27 @@
-# Lint-only image. `script/lint` builds this file and nothing else: the
-# linter runs as a build step, so a successful build IS a clean lint.
-# Building rather than bind-mounting is what makes it work where the
-# docker daemon is remote and bind mounts are impossible.
-#
-# The linter is invoked directly below rather than through `make lint`.
-# That is not a style choice: `script/lint` IS this build, so calling it
-# from inside would recurse into a docker build with no daemon.
-#
-# This repo's linter is prettier over markdown. A Go repo's version of
-# this file differs only in the base image and the two lint commands;
-# see the containerised-lint rule in prompts/REPO_POLICIES.md.
+# Lint-only image, built by script/lint when it is not already inside a
+# container. Linting is a build step, so a successful build is a clean
+# lint, and nothing is bind-mounted, which matters when the daemon is
+# remote.
 #
 # node 22-alpine, 2026-02-22
 FROM node@sha256:e4bf2a82ad0a4037d28035ae71529873c069b13eb0455466ae0bc13363826e34
 
 WORKDIR /app
 
-# Dependency layer first, and deliberately above the ARG below, so it
-# stays cached and only the lint steps re-run on every invocation.
-# Without that ordering the cache-bust would reinstall dependencies on
-# every lint and make linting network-dependent.
+# Makes script/lint run the linter directly instead of recursing into
+# another docker build, which has no daemon here.
+ENV LINT_IN_CONTAINER=1
+
 COPY script/ script/
 COPY package.json yarn.lock ./
 RUN script/bootstrap
 
 COPY . .
 
-# CHECK_EPOCH is a per-invocation nonce supplied by script/lint. Without
-# it an unchanged tree serves the lint layer from cache and the build
-# reports a lint it never ran — a green that proves nothing, which is
-# the whole failure mode this file exists to avoid reintroducing. The
-# guard makes a bare `docker build -f Dockerfile.lint .` fail loudly
-# instead of silently reusing the empty (and therefore stable) cache
-# key. The value is expanded into the lint command as well, so the cache
-# miss does not depend on BuildKit's handling of an unreferenced ARG and
-# the epoch is visible in the build log. Keep both references.
+# ARG sits after the dependency layer so that layer stays cached and
+# only the lint re-runs. The guard fails a bare `docker build
+# -f Dockerfile.lint .`, which would otherwise reuse the empty (stable)
+# cache key and report a lint it never ran.
 ARG CHECK_EPOCH
 RUN [ -n "$CHECK_EPOCH" ] || exit 1
-RUN echo "lint epoch: ${CHECK_EPOCH}" && \
-    yarn run prettier --check '**/*.md' --tab-width 4 --prose-wrap always
+RUN echo "lint epoch: ${CHECK_EPOCH}" && make lint

README.md

@@ -117,25 +117,21 @@ alpine. We provide:
 - `script/projectname` — output the project name (our own extension); used by
   `script/docker` for the image tag
 - `script/test` — run the test suite (no tests defined here)
-- `script/lint` — lint the markdown files, by building `Dockerfile.lint`. The
-  linter runs in a container, always: it is never installed on the host and
-  never invoked there. Linting happens as a build step, so a successful build is
-  a clean lint, and the same per-invocation `CHECK_EPOCH` nonce used elsewhere
-  is what stops Docker serving that lint from cache on an unchanged tree
+- `script/lint` — lint the markdown files with prettier. Inside a container
+  (`LINT_IN_CONTAINER=1`, set by both Dockerfiles) it runs prettier directly; on
+  a host it builds `Dockerfile.lint` so the linter still runs in a container
 - `script/fmt` — format all markdown files with prettier (writes)
 - `script/fmt-check` — check formatting (read-only)
 - `script/check` — run all checks: `test`, `lint`, `fmt-check` (our own
-  extension). Needs a docker daemon, since `script/lint` is a container build
+  extension)
 - `script/docker` — build the Docker image, tagged via `script/projectname`
   (byte-identical across repos); passes the same `CHECK_EPOCH` nonce as
   `script/cibuild`
-- `script/cibuild` — cd to the repo root, run `script/lint` first, then assign
-  `epoch="$(date +%s%N)$$"` and
-  `docker build --build-arg CHECK_EPOCH="$epoch" .` (what CI runs). Two
-  container builds: the lint image, then the main image, which runs
-  `script/test` and `script/fmt-check` but deliberately not `make check` — that
-  would nest a docker build inside a build step. A bare `docker build .` fails
-  closed on purpose
+- `script/cibuild` — cd to the repo root, assign `epoch="$(date +%s%N)$$"`, then
+  `docker build --build-arg CHECK_EPOCH="$epoch" .` (what CI runs; the image
+  build runs `script/check`, and the per-invocation `CHECK_EPOCH` nonce is what
+  stops Docker serving that check from cache on an unchanged tree — a bare
+  `docker build .` fails closed on purpose)
 - `script/precommit` — run by the git pre-commit hook (our own extension); calls
   `script/check`
 - `script/install-precommit` — installs the git pre-commit hook (our own

TODO.md

@@ -21,53 +21,27 @@ fmt-check, and commit.
 
 # Completed Steps
 
-- 2026-08-10: Closed three gaps the containerised-lint rule left between the
-  canonical text and the first repos to implement it. `.dockerignore` excluding
-  the agent scratch directory is now stated as a correctness precondition of
-  that rule rather than a context-size measure: the lint image lints whatever
-  `COPY . .` copies, and toolchains discover files by walking the tree instead
-  of reading `.gitignore`, so a nested worktree puts the foreign-tree false reds
-  back inside the container — `sneak/quak` measured the same discovery mechanism
-  taking a test count from 210 to 1050. The cache-bust arg is fixed at
-  `CHECK_EPOCH` in `Dockerfile.lint` as well, because a per-file name is
-  invisible to the grep that proves every build is busted, making a renamed
-  guard indistinguishable from a missing one. And the formatting check is now
-  required to run in exactly one of the two images, with either placement
-  allowed: splitting lint out of the `Dockerfile` is precisely when `fmt-check`
-  gets dropped from both, and running the formatter beside the linters is the
-  better shape where it is the same pinned dependency.
-- 2026-08-10: Moved every lint run into a container, on the owner's ruling, and
-  made this repo do it rather than merely document it. `script/lint` is now
-  `docker build -f Dockerfile.lint .` and nothing else; the linter is never
-  installed on the host and never invoked there, so a run cannot inherit another
-  checkout's content-keyed result cache, the host-global
-  `$TMPDIR/golangci-lint.lock`, or a host toolchain that differs from the pinned
-  one — the three mechanisms behind a confirmed false green, a string of
-  findings reported against other agents' checkouts, and a container that saw
-  thirteen findings the host missed. Linting runs as a build step, so a
-  successful build is a clean lint, which also works where the docker daemon is
-  remote and bind mounts are impossible. The recursion this creates is resolved
-  by direction rather than by detection: the main `Dockerfile` runs the
-  individual non-lint checks instead of `make check`, and `script/cibuild` runs
-  `script/lint` first, so no build ever nests a build. `Dockerfile.lint` carries
-  the same `CHECK_EPOCH` guard as the main image, with the `ARG` below the
-  dependency layer so only the lint steps re-run — blanket `--no-cache` was
-  rejected because it makes every lint reinstall its dependencies over the
-  network. Two canonical forms were superseded rather than left standing beside
-  the new one, since consuming repos read this document literally: the
-  `script/bootstrap` golangci-lint install (nothing runs a host linter now, so
-  it can only reintroduce skew; the version-enforcement principle stays
-  documented for other pinned host tools) and the per-checkout
-  cache/lock/`.lint-cache` wrapper (its whole subject was making a host run
-  trustworthy). The Go multistage lint stage goes with them: it ran `make lint`,
-  which is now a docker build. `golangci-lint config verify` was kept on
-  measurement, not preference — a bogus config key passes `golangci-lint run`
-  with `0 issues` and fails `config verify`, and every case reproduced
-  byte-identically under `docker run --network none`, so the schema is embedded
-  in the pinned binary and the line costs no network. Verified with two
-  consecutive runs on an unchanged tree both executing the linter, a planted
-  violation caught and reverted, the bare-build guard firing, and the main image
-  building without attempting a nested build.
+- 2026-08-10: Moved every lint run into a container. `script/lint` now runs the
+  linter directly when `LINT_IN_CONTAINER=1` and otherwise builds
+  `Dockerfile.lint`, so the linter never runs on a developer host — closing the
+  content-keyed result cache that produced a confirmed false green, the
+  host-global `$TMPDIR/golangci-lint.lock`, and host/container version skew.
+  Detection is on that marker alone: a false negative inside a container fails
+  loudly on the missing daemon, while a false positive on a host would silently
+  restore host linting, so `/.dockerenv` is rejected outright — measured absent
+  inside BuildKit `RUN` steps and present on hosts that are themselves
+  containers. Everything else keeps its existing shape: `make check` still runs
+  in the image, `script/cibuild` is still one build, and the Go multistage lint
+  stage survives with `ENV LINT_IN_CONTAINER=1`. `Dockerfile.lint` carries the
+  same `CHECK_EPOCH` guard, with the `ARG` below the dependency layer so only
+  the lint re-runs. The `script/bootstrap` golangci-lint install and the
+  per-checkout cache/lock/`.lint-cache` wrapper are deleted as superseded; a JS
+  repo's `yarn install` stays, since the rule is about where a verdict comes
+  from, not about which binaries exist. `golangci-lint config verify` was kept
+  on measurement: a bogus config key passes `golangci-lint run` with `0 issues`
+  and fails `config verify`, and every case reproduced byte-identically under
+  `--network none`, so the schema is embedded and the line costs no network.
+  Comment blocks across the touched files were cut hard in the same pass.
 - 2026-08-09: Made a golangci-lint result belong to the tree that asked for it.
   REPO_POLICIES.md now carries the canonical Go `script/lint`, which gives the
   linter per-checkout `GOLANGCI_LINT_CACHE` and per-checkout `TMPDIR`. The two

prompts/CODE_STYLEGUIDE_GO.md

@@ -111,24 +111,21 @@ last_modified: 2026-08-10
 
 1.  For anything beyond a simple script or tool, or anything that is going to
     run in any sort of "production" anywhere, make sure it passes
-    `golangci-lint`. Run it with `make lint`, which builds `Dockerfile.lint`:
-    the linter runs in a container, always, and is never installed on the host.
-    A `golangci-lint` invoked directly on a shared host reads a result cache
-    keyed on file content rather than location and a host-global lock, so its
-    answer may belong to another checkout entirely.
+    `golangci-lint`. Run it with `make lint`, never by invoking the binary: the
+    linter always runs in a container, and `golangci-lint` is not installed on
+    the host by any repo. Invoked directly on a shared host it reads a result
+    cache keyed on file content rather than location, and a host-global lock, so
+    its answer may belong to another checkout entirely.
 
-1.  Write a `Dockerfile` for every repo, even if it only runs the tests. It runs
-    the non-lint checks; linting lives in `Dockerfile.lint` and is run by
-    `script/cibuild` before the main build, because `script/lint` is itself a
-    `docker build` and cannot run inside one. So `script/cibuild` is what
-    guarantees the code is in an able-to-be-compiled state, linted, and tested —
-    **a successful `docker build .` on its own does not, because it never
-    lints.** That guarantee holds only because each build passes a
-    per-invocation `CHECK_EPOCH` build arg that busts its check layers out of
-    the Docker cache; without it an unchanged tree serves those layers from
-    cache and the build reports a green it never ran. A bare `docker build .`
-    fails closed by design, on the `[ -n "$CHECK_EPOCH" ]` guard — always go
-    through `script/cibuild`, `script/docker` or `script/lint`. See
+1.  Write a `Dockerfile` for every repo, even if it only runs the tests and
+    linting. `script/cibuild` and `script/docker` should always make sure that
+    the code is in an able-to-be-compiled state, linted, and any tests run, and
+    the build should fail if linting doesn't pass. That guarantee holds only
+    because those scripts pass a per-invocation `CHECK_EPOCH` build arg that
+    busts the check layers out of the Docker cache; without it an unchanged tree
+    serves those layers from cache and the build reports a green it never ran. A
+    bare `docker build .` fails closed by design, on the `[ -n "$CHECK_EPOCH" ]`
+    guard — always go through `script/cibuild` or `script/docker`. See
     [Repository Policies](https://git.eeqj.de/sneak/prompts/raw/branch/main/prompts/REPO_POLICIES.md)
     for the canonical form.
 

prompts/EXISTING_REPO_CHECKLIST.md

@@ -36,31 +36,21 @@ with your task.
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.editorconfig`
 - [ ] `Dockerfile` and `.dockerignore` exist (fetch `.dockerignore` from
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore`);
-      Dockerfile runs the **non-lint** checks as build steps (`script/test`,
-      `script/fmt-check`), and every stage containing a check-running `RUN`
-      declares `ARG CHECK_EPOCH` with the `RUN [ -n "$CHECK_EPOCH" ] || exit 1`
-      guard immediately below it — see the `CHECK_EPOCH` rule in
-      `REPO_POLICIES.md`. Without them the check layer is served from cache on
-      an unchanged tree and the build reports a green it never ran.
-- [ ] The `Dockerfile` no longer runs `make check`, and no longer has a `lint`
-      stage or a `COPY --from=lint ... /dev/null` ordering line. This is the
-      item an existing repo most often fails: `script/lint` is now a
-      `docker build`, so both of those nest a docker build inside a build step.
-      Delete the stage; `script/cibuild` running `script/lint` first is what
-      replaces its fail-fast purpose.
-- [ ] `Dockerfile.lint` exists and `script/lint` builds it — see the
-      containerised-lint rule in `REPO_POLICIES.md` for the canonical file. Its
-      base image is pinned by sha256 with a version/date comment, it carries
-      `ARG CHECK_EPOCH` **after** the dependency layer with the guard below it,
-      and it invokes the linter directly rather than through `make lint`. The
-      arg is named `CHECK_EPOCH` in this file too — a repo that calls it
-      `LINT_EPOCH` here is missed by the grep that checks every build is
-      cache-busted.
-- [ ] The formatting check runs in exactly one of the two images — either
-      `script/fmt-check` in the `Dockerfile` or the formatter beside the linters
-      in `Dockerfile.lint`, whichever puts it on the pinned toolchain. Neither
-      image running it is the failure to look for here, since moving lint out of
-      the `Dockerfile` is exactly when it gets dropped.
+      Dockerfile runs `make check` as a build step, and every stage containing a
+      check-running `RUN` declares `ARG CHECK_EPOCH` with the
+      `RUN [ -n "$CHECK_EPOCH" ] || exit 1` guard immediately below it — see the
+      `CHECK_EPOCH` rule in `REPO_POLICIES.md`. Without them the check layer is
+      served from cache on an unchanged tree and the build reports a green it
+      never ran.
+- [ ] **Every stage that runs checks sets `ENV LINT_IN_CONTAINER=1`** — the lint
+      stage and the build stage both. This is the item an existing repo most
+      often fails after adopting the containerised lint: without it
+      `script/lint` tries to build `Dockerfile.lint` from inside a build step,
+      where there is no daemon.
+- [ ] `Dockerfile.lint` exists and `script/lint` builds it when not already in a
+      container — see the containerised-lint rule in `REPO_POLICIES.md`. Base
+      image pinned by sha256 with a version/date comment, `ARG CHECK_EPOCH`
+      **after** the dependency layer with the guard below it.
 - [ ] `.dockerignore` excludes the repo's own host-built artifacts (compiled
       binaries, test binaries, coverage output), written root-anchored —
       `/myapp`, never `**/myapp`, which would also match `cmd/myapp/`. An
@@ -69,11 +59,8 @@ with your task.
 - [ ] `.dockerignore` excludes `.claude`, root-anchored and with no `**/`
       prefix. Agent worktrees are entire checkouts of the repo, so they inflate
       the context by a multiple of it and can copy another session's unreviewed
-      work into an image layer — and `Dockerfile.lint` then lints that checkout
-      as though it were this one, because toolchains discover files by walking
-      the tree and never read `.gitignore` (`sneak/quak`: 210 discovered tests
-      became 1050). Confirm by enumerating the image, not by reading the file —
-      `.gitignore` hides these from `git status` too.
+      work into an image layer. Confirm by enumerating the image, not by reading
+      the file — `.gitignore` hides these from `git status` too.
 - [ ] **Do agents in this repo run anywhere other than the repo root?** The
       scratch directory is created in the agent's working directory, so the
       canonical anchored entry misses `services/api/.claude/` in a monorepo with
@@ -122,24 +109,24 @@ with your task.
       `script/install-precommit`, shimmed by `make hooks`) runs it
 - [ ] README has an **Entrypoints** section documenting the `script/`
       entrypoints and linking the standard
-- [ ] `script/lint` is the canonical container build and nothing else. No host
-      linter invocation survives anywhere in the repo — grep for the linter's
-      own name in `script/`, the `Makefile` and CI config, not just in
-      `script/lint`. An existing repo is where a second path to the linter is
-      likeliest to exist: a `make lint-fast`, a container-versus-host branch, or
-      a CI step that calls the binary directly.
-- [ ] `script/bootstrap` installs no linter. Delete the golangci-lint install
-      block, its version and ref variables, and its call site: nothing invokes a
-      host linter any more, so all it can still do is put a differently
-      versioned binary where somebody runs it by hand and believes the result.
+- [ ] `script/lint` is the canonical detect-and-branch form, and no host
+      invocation anywhere in the repo can produce a lint **verdict** — grep for
+      the linter's own name across `script/`, the `Makefile` and CI config, not
+      just `script/lint`. A second path is likeliest here: a `make lint-fast`,
+      an older container-versus-host branch, or a CI step calling the binary
+      directly. **Expected hits that are not the defect**: `script/fmt`, and in
+      a repo whose formatter is also its linter, `script/fmt-check`. Everything
+      else the grep finds is a real second path and goes.
+- [ ] Detection is on `LINT_IN_CONTAINER` alone. Reject any `/.dockerenv` or
+      cgroup heuristic: absent in BuildKit `RUN` steps, present on hosts that
+      are themselves containers, and a false positive lints on the host.
+- [ ] `script/bootstrap` installs no golangci-lint. Delete the block, its
+      version and ref variables, and its call site. A JS repo's `yarn install`
+      stays — it brings a linter along with every other dependency, which is
+      fine as long as no verdict is taken from it.
 - [ ] The per-checkout lint state is gone: no `GOLANGCI_LINT_CACHE` or `TMPDIR`
       exports, no `--allow-serial-runners`, and `.lint-cache/` removed from
-      `.gitignore` and `.dockerignore`. A container has its own cache and its
-      own lock, so keeping the wrapper leaves two contradictory `script/lint`
-      forms in the fleet.
-- [ ] `script/cibuild` runs `script/lint` before the main `docker build`.
-      Without that line CI never lints at all, because the main image
-      deliberately does not.
+      `.gitignore` and `.dockerignore`.
 - [ ] `make check` does not modify any files in the repo
 - [ ] `make test` has a 30-second timeout
 - [ ] `make test` runs real tests, not a no-op (at minimum, import/compile
@@ -188,7 +175,7 @@ with your task.
 - [ ] `make check` passes
 - [ ] `make lint` runs twice on an unchanged tree with the lint layer `DONE`
       both times, never `CACHED` and never sub-second
-- [ ] `script/cibuild` succeeds and runs both container builds (a bare
-      `docker build .` or `docker build -f Dockerfile.lint .` fails closed by
-      design, on the `CHECK_EPOCH` guard)
+- [ ] `script/cibuild` succeeds (a bare `docker build .` or
+      `docker build -f Dockerfile.lint .` fails closed by design, on the
+      `CHECK_EPOCH` guard)
 - [ ] Commit and merge fixes before starting your actual task

prompts/NEW_REPO_CHECKLIST.md

@@ -73,36 +73,27 @@ Template files can be fetched from:
       declared in the stage that compiles, and **no stage calls `git describe`**
       — `.dockerignore` excludes `.git`, so it yields an empty version without
       failing the build.
-    - The `Dockerfile` runs the **non-lint** checks as build steps —
-      `script/test` and `script/fmt-check`, never `make check`. `script/lint` is
-      a `docker build` of `Dockerfile.lint`, so `make check` here nests a build
-      inside a build step, where there is no daemon. Put a comment above those
-      `RUN` lines saying so. Every stage containing a check-running `RUN` must
-      declare `ARG CHECK_EPOCH` with the `RUN [ -n "$CHECK_EPOCH" ] || exit 1`
-      guard immediately below it — see the `CHECK_EPOCH` rule in
-      `REPO_POLICIES.md`. Without them the check layer is served from cache on
-      an unchanged tree and the build reports a green it never ran.
+    - All Dockerfiles must run `make check` as a build step, and every stage
+      containing a check-running `RUN` must declare `ARG CHECK_EPOCH` with the
+      `RUN [ -n "$CHECK_EPOCH" ] || exit 1` guard immediately below it — see the
+      `CHECK_EPOCH` rule in `REPO_POLICIES.md`. Without them the check layer is
+      served from cache on an unchanged tree and the build reports a green it
+      never ran.
+    - Every stage that runs checks sets `ENV LINT_IN_CONTAINER=1`, so
+      `script/lint` runs the linter natively instead of trying to build
+      `Dockerfile.lint` where there is no daemon.
+    - Go repos: separate `lint` stage on the `golangci/golangci-lint` image,
+      with `COPY --from=lint /src/go.sum /dev/null` in the build stage to force
+      the ordering. Re-prove that ordering warm after adopting `CHECK_EPOCH`.
     - Server: also builds and runs the application
-    - Non-server: brings up dev environment and runs those checks
+    - Non-server: brings up dev environment and runs `make check`
     - Image pinned by sha256 hash with version/date comment
-- [ ] `Dockerfile.lint` — the lint-only image that `script/lint` builds. Same
+- [ ] `Dockerfile.lint` — the lint-only image `script/lint` builds when it is
+      not already inside a container. Sets `ENV LINT_IN_CONTAINER=1`; same
       `ARG CHECK_EPOCH` + guard + expanded-value discipline as above, with the
-      `ARG` placed **after** the dependency layer so only the lint steps re-run.
-      Base image pinned by sha256 with a version/date comment. Go repos use
-      `golangci/golangci-lint` and run both `golangci-lint config verify` and
-      `golangci-lint run`; other repos use the same pattern around their own
-      linter (eslint, ruff, prettier). Copy the canonical file from
-      `REPO_POLICIES.md`. The linter is invoked directly there, never via
-      `make lint`, which would recurse. The arg keeps the name `CHECK_EPOCH` in
-      this file as well, so one grep covers both builds.
-    - The formatting check runs in exactly one of the two images: either
-      `script/fmt-check` in the `Dockerfile`, or the formatter beside the
-      linters in `Dockerfile.lint` where that is the same pinned dependency.
-      Never neither, never both.
-    - `.dockerignore` must exclude the agent scratch directory before this image
-      is trusted: it lints whatever is in the build context, and toolchains walk
-      the tree rather than reading `.gitignore`, so an agent worktree that
-      reaches the context is linted as though it were the repo.
+      `ARG` **after** the dependency layer so only the lint re-runs. Base image
+      pinned by sha256 with a version/date comment. Copy from
+      `REPO_POLICIES.md`.
 - [ ] Gitea Actions workflow at `.gitea/workflows/check.yml` that runs
       `script/cibuild` on push — reference
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.gitea/workflows/check.yml`
@@ -129,26 +120,26 @@ are thin shims calling them. Model scripts:
       then `install-precommit`, plus repo-specific init
 - [ ] `script/test` / `make test` — runs real tests, not a no-op (30-second
       timeout)
-- [ ] `script/lint` / `make lint` — builds `Dockerfile.lint` and nothing else:
-      `epoch="$(date +%s%N)$$"` on its own line, then
-      `docker build --build-arg CHECK_EPOCH="$epoch" -f Dockerfile.lint .`. The
-      linter is never installed on the host and never invoked there. Copy the
-      canonical script from `REPO_POLICIES.md`; it is byte-identical across
-      repos. Without the nonce this script exits 0 on an unchanged tree having
-      linted nothing.
+- [ ] `script/lint` / `make lint` — runs the linter directly when
+      `LINT_IN_CONTAINER=1`, otherwise `epoch="$(date +%s%N)$$"` on its own line
+      then `docker build --build-arg CHECK_EPOCH="$epoch" -f Dockerfile.lint .`.
+      No lint verdict may come from a host invocation. Copy from
+      `REPO_POLICIES.md`. Detect on `LINT_IN_CONTAINER` only — never
+      `/.dockerenv`, which is absent in BuildKit `RUN` steps and present on
+      hosts that are themselves containers. Without the nonce this exits 0 on an
+      unchanged tree having linted nothing; without `-f Dockerfile.lint` it
+      builds the main image and lints nothing at all.
 - [ ] `script/fmt` / `make fmt` — formats code (writes)
 - [ ] `script/fmt-check` / `make fmt-check` — checks formatting (read-only)
 - [ ] `script/check` / `make check` — runs `test`, `lint`, `fmt-check`; must not
-      modify files. It needs a docker daemon, because `script/lint` is a
-      container build, and it must never be called from inside a build stage
+      modify files
 - [ ] `script/projectname` — outputs the project name (used by `script/docker`
       for the image tag)
 - [ ] `script/docker` / `make docker` — builds Docker image, tagged via
       `script/projectname` (byte-identical across repos); carries the same three
       version lines as `script/cibuild` below, and passes
       `--build-arg CHECK_EPOCH="$epoch"` and `--build-arg VERSION="$version"`
-- [ ] `script/cibuild` — cd to repo root, run `script/lint` **first** for
-      fail-fast feedback, then, each on its own line:
+- [ ] `script/cibuild` — cd to repo root, then, each on its own line:
 
     ```sh
     epoch="$(date +%s%N)$$"
@@ -160,17 +151,17 @@ are thin shims calling them. Model scripts:
         .
     ```
 
-    (what CI runs). The `script/lint` call is not optional: the main image does
-    not lint, so without it CI never lints. Both build args are mandatory, and
-    both assignments must be on their own line: a failing command substitution
-    inside an argument does not trip `set -e`, so the inline form degrades
-    silently to an empty constant. The `[ -n "$version" ]` line is a live check
-    that fires on an export with no `.git` and on a repo with no commits — keep
-    it, and do not collapse it into `|| echo unknown`, which makes it
-    unreachable. See the `CHECK_EPOCH` and git-describe rules in
-    `REPO_POLICIES.md` for why each element is load-bearing. A bare
-    `docker build .` fails closed by design, and so does a bare
-    `docker build -f Dockerfile.lint .`.
+    (what CI runs). Both build args are mandatory, and both assignments must be
+    on their own line: a failing command substitution inside an argument does
+    not trip `set -e`, so the inline form degrades silently to an empty
+    constant. The `[ -n "$version" ]` line is a live check that fires on an
+    export with no `.git` and on a repo with no commits — keep it, and do not
+    collapse it into `|| echo unknown`, which makes it unreachable. See the
+    `CHECK_EPOCH` and git-describe rules in `REPO_POLICIES.md` for why each
+    element is load-bearing. A bare `docker build .` fails closed by design, and
+    so does a bare `docker build -f Dockerfile.lint .`. The image runs
+    `make check`, which includes lint, so `script/cibuild` needs no separate
+    lint step.
 
 - [ ] `script/precommit` — called by the pre-commit hook; runs `script/check`
 - [ ] `script/install-precommit` — installs the pre-commit hook that runs
@@ -186,7 +177,7 @@ are thin shims calling them. Model scripts:
       build: run it twice on an unchanged tree and confirm the lint layer says
       `DONE`, never `CACHED`, both times
 - [ ] `make docker` succeeds
-- [ ] `script/cibuild` succeeds and runs both container builds
+- [ ] `script/cibuild` succeeds and demonstrably executes
 - [ ] No secrets in repo
 - [ ] No mutable image/package references
 - [ ] No unnecessary files in repo root

prompts/REPO_POLICIES.md

@@ -60,8 +60,7 @@ style conventions are in separate documents:
   prerequisite since nvm requires bash. yarn is then pinned via
   `corepack prepare yarn@<version> --activate`. Never install "latest" or "lts";
   always exact versions. `script/cibuild` runs the CI build: it changes to the
-  repo root, runs `script/lint` first for fail-fast feedback (that is itself a
-  container build — see the containerised-lint rule below), and then runs
+  repo root and runs
   `docker build --build-arg CHECK_EPOCH="$epoch" --build-arg VERSION="$version" .`,
   where `epoch` is a per-invocation nonce (see the `CHECK_EPOCH` rule below) and
   `version` is computed on the host because `.git` is not in the build context
@@ -94,29 +93,22 @@ style conventions are in separate documents:
   contributor should be able to understand the entire development workflow by
   reading the Makefile.
 
-- Every repo should have a `Dockerfile`. It must run the repo's checks as build
-  steps so the build fails if the branch is not green — which requires
+- Every repo should have a `Dockerfile`. All Dockerfiles must run `make check`
+  as a build step so the build fails if the branch is not green — which requires
   `ARG CHECK_EPOCH` and its guard in every stage containing a check-running
   `RUN`, per the `CHECK_EPOCH` rule below. Without them a Dockerfile satisfies
   this criterion while its check layers are served from cache, so the build
   cannot fail on a branch that is not green.
 
-    **It runs the individual non-lint checks — `script/test` and
-    `script/fmt-check` — and never `make check`.** `script/lint` is itself a
-    `docker build` (of `Dockerfile.lint`, per the containerised-lint rule
-    below), so a `RUN make check` in this file attempts a docker build inside a
-    build step, where there is no daemon. Lint is not skipped by this: it runs
-    in its own container, and `script/cibuild` runs it first. Put a comment to
-    that effect directly above those `RUN` lines, because `make check` is what
-    the next person will reach for. Of the two, only `script/test` is fixed
-    here: a repo may run its formatter in `Dockerfile.lint` beside the linters
-    instead, and some should — see the containerised-lint rule below. It must
-    then run in that file and not in this one, and never in neither.
+    **Every Dockerfile must also set `ENV LINT_IN_CONTAINER=1`**, above the
+    checks. `script/lint` builds `Dockerfile.lint` when it is not already in a
+    container; without the marker it would try that from inside a build step,
+    where there is no daemon. See the containerised-lint rule below.
 
     For non-server repos, the Dockerfile should bring up a development
-    environment and run those checks. For server repos, they should run as an
-    early build stage before the final image is assembled. Dockerfiles install
-    development prerequisites by running `script/bootstrap` rather than
+    environment and run `make check`. For server repos, `make check` should run
+    as an early build stage before the final image is assembled. Dockerfiles
+    install development prerequisites by running `script/bootstrap` rather than
     duplicating installs inline; COPY `script/` and the dependency manifests
     (`package.json` + `yarn.lock`, `go.mod` + `go.sum`, etc.) before running it
     so the bootstrap layer stays cached until dependencies change.
@@ -126,19 +118,18 @@ style conventions are in separate documents:
   unchanged tree the check layer is served from cache, the suite never runs, and
   the build still exits 0. A sub-second `docker build` reporting success is a
   cache hit, not a result. This applies to **every** file that runs checks in a
-  build step, which since linting moved into its own container means
-  `Dockerfile` and `Dockerfile.lint` both — a `Dockerfile.lint` without the
-  cache-bust is a lint that never ran, reported as a pass. The canonical form,
-  in **every** stage containing a check-running `RUN`, placed **after** the
-  dependency-install layer so that layer stays cached:
+  build step — `Dockerfile` and `Dockerfile.lint` alike; a `Dockerfile.lint`
+  without the cache-bust is a lint that never ran, reported as a pass. The
+  canonical form, in **every** stage containing a check-running `RUN`, placed
+  **after** the dependency-install layer so that layer stays cached:
 
     ```dockerfile
     ARG CHECK_EPOCH
     RUN [ -n "$CHECK_EPOCH" ] || exit 1
-    RUN echo "check epoch: ${CHECK_EPOCH}" && <the check command>
+    RUN echo "check epoch: ${CHECK_EPOCH}" && make check
     ```
 
-    and in `script/lint`, `script/cibuild` and `script/docker`:
+    and in both `script/cibuild` and `script/docker`:
 
     ```sh
     epoch="$(date +%s%N)$$"
@@ -150,12 +141,15 @@ style conventions are in separate documents:
         .
     ```
 
+    `script/lint` needs the same nonce but is **not** this command: it builds a
+    different file with `-f Dockerfile.lint` and passes no version. Copy its
+    form from the containerised-lint rule below, not this block — a
+    `docker build` with no `-f` builds the main image and lints nothing.
+
     The `VERSION` lines are there for a different reason, covered by the
     git-describe rule below; they are shown here so the two rules do not each
-    document half a command. `script/lint` passes only `CHECK_EPOCH`, since no
-    version is embedded in a lint image. All four `CHECK_EPOCH` elements are
-    load-bearing; none is optional, and each guards a failure mode that
-    otherwise fails green:
+    document half a command. All four `CHECK_EPOCH` elements are load-bearing;
+    none is optional, and each guards a failure mode that otherwise fails green:
     - `ARG` is stage-scoped, so a single declaration leaves the other check
       stages frozen while the fix reviews as complete. Declare it in every stage
       that runs checks, immediately above the first such `RUN`.
@@ -182,107 +176,65 @@ style conventions are in separate documents:
       concurrent invocations would collide.
 
     This invalidates the check layers and everything after them while leaving
-    `go mod download`, `script/bootstrap`, and the pinned toolchain install
-    cached, so it does not push against the five-minute Docker build ceiling.
-    Blanket `--no-cache` is **not** an acceptable substitute, on `Dockerfile` or
-    on `Dockerfile.lint`: it re-runs `go mod download` / `yarn install` on every
-    invocation, which makes linting network-dependent and pushes a lint that
-    should take seconds toward the build ceiling. Never reach for
-    `docker builder prune` to achieve the same end — the build cache is shared
-    with every other build on the host, including other people's.
+    `go mod download` and `script/bootstrap` cached, so it does not push against
+    the five-minute Docker build ceiling. Blanket `--no-cache` is not an
+    acceptable substitute: it also busts the dependency layer, so every run
+    reinstalls dependencies over the network instead of only the first and those
+    after a manifest change. Never reach for `docker builder prune` — the build
+    cache is shared with every other build on the host.
 
-- **Every lint run happens in a container, and `script/lint` is that container
-  build.** The linter is never installed on the host and never invoked there.
-  Every repo carries a `Dockerfile.lint` next to its `Dockerfile`; the linter
-  runs as a **build step**, so a successful build _is_ a clean lint. Building
-  rather than bind-mounting is deliberate: it is what makes the pattern work
-  unchanged where the docker daemon is remote and bind mounts are impossible.
-  Docker is assumed available in every environment. Discarding the linter's
-  cache on every run is the point of this rule, not a cost it pays.
+- **Every lint run happens in a container.** `script/lint` runs the linter
+  directly when it is already inside one, and otherwise builds `Dockerfile.lint`
+  so that it is. Either way the linter never runs on a developer host, where its
+  answer is not trustworthy:
+    - **Confirmed false green.** golangci-lint keys cached results on file
+      **content, not location**, so a second checkout of the same commit serves
+      its findings. One implementer reported `0 issues` on a branch genuinely
+      red with a `goconst` finding. Own-clones-instead-of-worktrees does not
+      help; two clones are byte-identical exactly as two worktrees were.
+    - **False reds**: findings reported against other checkouts and against
+      worktrees already deleted; in one case 399 issues returned to a clean
+      clone that genuinely lints 0.
+    - **Lock contention indistinguishable from findings.** golangci-lint flocks
+      `$TMPDIR/golangci-lint.lock` (`pkg/commands/run.go`, `acquireFileLock()`),
+      host-global and independent of `GOLANGCI_LINT_CACHE`, 5-second timeout. It
+      prints `parallel golangci-lint is running`, analyzes nothing, exits
+      non-zero. Not fixed by per-cache isolation — measured.
+    - **Version skew**: a host linter differing from the pinned one, with the
+      container surfacing thirteen findings the host missed.
 
-    This closes a family of defects, every one of them an artefact of running
-    the linter on a shared host, and every one of them observed rather than
-    hypothesised:
-    - **A confirmed false green.** An implementer reported `0 issues` on a
-      branch that was genuinely red with a `goconst` finding. golangci-lint keys
-      cached results on file **content, not location**, so a second checkout of
-      the same commit holds byte-identical files and serves its result. Note
-      what content-keying implies: moving agents from worktrees into their own
-      clones does **not** help, because two clones are byte-identical exactly as
-      two worktrees were. It removes the foreign-path symptom and leaves the
-      mechanism live, which makes the defect quieter rather than rarer.
-    - **False reds**, repeatedly: findings reported against `../wt82-lint/...`,
-      against another agent's checkout, and against a worktree that had already
-      been deleted; in one case 399 issues returned to a clean clone that
-      genuinely lints 0.
-    - **Lock contention that cannot be distinguished from findings.**
-      golangci-lint flocks `$TMPDIR/golangci-lint.lock` (`pkg/commands/run.go`,
-      `acquireFileLock()`) — host-global, keyed on the temp directory, entirely
-      independent of `GOLANGCI_LINT_CACHE`, with a 5-second acquire timeout, so
-      it fails precisely when the host is busiest. On failure it prints
-      `parallel golangci-lint is running`, analyzes nothing, and exits non-zero.
-      **Proven not fixed by per-cache isolation**: two concurrent runs with
-      entirely separate cache directories still collided.
-    - **Version skew.** A host linter differing from the pinned one, with the
-      container surfacing thirteen findings the host missed on one repo, and a
-      local `make check` green against a `make docker` that rejected the same
-      commit with six `goconst` findings.
+    A container has its own cache, its own `TMPDIR` and a binary pinned by
+    digest, so none of it is reachable. This supersedes the per-checkout
+    `GOLANGCI_LINT_CACHE`/`TMPDIR` wrapper, which existed only to make a host
+    run trustworthy; delete it on adoption.
 
-    A container per run has its own cache, its own `TMPDIR` and therefore its
-    own lock, and a binary pinned by digest, so none of the above is reachable.
-    That is also why the per-checkout `GOLANGCI_LINT_CACHE`/`TMPDIR` wrapper
-    that used to be canonical here is **gone rather than kept alongside this**:
-    its entire subject was making a host run trustworthy, and there are no host
-    runs. Consuming repos delete it when they adopt this; see the adoption list
-    at the end of this rule.
-
-    The canonical `Dockerfile.lint` for a Go repo:
-
-    ```dockerfile
-    # Lint-only image. `script/lint` builds this file and nothing else: the
-    # linter runs as a build step, so a successful build IS a clean lint.
-    #
-    # The linter is invoked directly below rather than through `make lint`.
-    # That is not a style choice: `script/lint` IS this build, so calling it
-    # from inside would recurse into a docker build with no daemon.
-    #
-    # golangci/golangci-lint:v2.12.2 (Debian-based), 2026-08-07
-    FROM golangci/golangci-lint@sha256:5cceeef04e53efe1470638d4b4b4f5ceefd574955ab3941b2d9a68a8c9ad5240
-
-    WORKDIR /src
-
-    # Dependency layer first, and deliberately above the ARG below, so it
-    # stays cached and only the lint steps re-run on every invocation.
-    COPY go.mod go.sum ./
-    RUN go mod download
-
-    COPY . .
-
-    ARG CHECK_EPOCH
-    RUN [ -n "$CHECK_EPOCH" ] || exit 1
-    RUN echo "lint epoch: ${CHECK_EPOCH}" && \
-        golangci-lint config verify --config .golangci.yml
-    RUN golangci-lint run --config .golangci.yml ./...
-    ```
-
-    and the canonical `script/lint`, identical in every repo:
+    The canonical `script/lint`, whose executable lines are the same in every
+    repo apart from the native lint command:
 
     ```sh
     #!/bin/sh
-    # script/lint: run the linter. The linter is never installed on the host
-    # and never invoked there — it runs in a container, one way, everywhere,
-    # so a run cannot inherit another checkout's cache, another process's
-    # lock, or a host toolchain that differs from the pinned one.
+    # script/lint: run the linter. Inside a container, run it directly; on a
+    # host, build Dockerfile.lint so it runs in one anyway.
+    #
+    # LINT_IN_CONTAINER is set by this repo's Dockerfiles and is the ONLY
+    # accepted signal. Do not add a /.dockerenv fallback: it is absent inside
+    # BuildKit RUN steps and present on hosts that are themselves containers,
+    # so it both misses and false-positives — and a false positive silently
+    # restores host linting.
     set -eu
 
     ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
     main() {
         cd "$ROOT"
-        # Own line: a failing command substitution inside an argument does
-        # not trip `set -e`, and `$$` is required because busybox `date`
-        # drops %N without erroring. Without a fresh nonce the lint layer is
-        # served from cache and this script exits 0 having linted nothing.
+
+        if [ "${LINT_IN_CONTAINER:-}" = "1" ]; then
+            exec golangci-lint run --config .golangci.yml ./...
+        fi
+
+        # Own line, and `$$` because busybox `date` drops %N silently.
+        # Without a fresh nonce the lint layer is cached and this exits 0
+        # having linted nothing.
         epoch="$(date +%s%N)$$"
         docker build \
             --build-arg CHECK_EPOCH="$epoch" \
@@ -293,123 +245,137 @@ style conventions are in separate documents:
     main "$@"
     ```
 
-    Load-bearing properties:
-    - **`CHECK_EPOCH`, not `--no-cache`.** `docker build -f Dockerfile.lint .`
-      on an unchanged tree returns a sub-second cached success having linted
-      nothing — the same false green the `CHECK_EPOCH` rule above exists to
-      close, arriving through a new file. The `ARG` goes **after** the
-      dependency layer so `go mod download` / `yarn install` stay cached and
-      only the lint steps re-run. Blanket `--no-cache` also busts the dependency
-      layer, which makes every lint network-dependent.
-    - **Non-Go repos get the same pattern around their own linter** — `eslint`,
-      `ruff`, `prettier`, `shellcheck` — because the ruling is every lint run,
-      not every Go lint run. Only the base image and the lint commands change;
-      the `WORKDIR`, dependency layer, `ARG CHECK_EPOCH`, guard and
-      expanded-value `RUN` are identical. A JS or docs repo bases on its pinned
-      node image, runs `script/bootstrap` as the dependency layer, and lints
-      with the linter from `node_modules`, which is also how it gets the version
-      pinned in `package.json` rather than whatever is on the host.
-    - **The lint container lints whatever is in the build context, so
-      `.dockerignore` is part of this rule and not merely hygiene.** `COPY . .`
-      copies an agent scratch worktree — an entire second checkout of the repo —
-      into the lint image unless `.dockerignore` excludes it, and language
-      toolchains discover files by walking the tree rather than by reading
-      `.gitignore`, so `./...`, `eslint .` and `prettier --check .` all descend
-      into it. `sneak/quak` measured this on the same discovery mechanism in its
-      test runner: a nested `.claude/` worktree took the discovered test count
-      from 210 to 1050 (https://git.eeqj.de/sneak/quak/issues/30). Left in the
-      context it re-creates _inside_ the container the foreign-tree false reds
-      that moving lint into a container was adopted to end, and it does so in
-      the convincing form — the findings are real, they simply belong to another
-      checkout. See the `.dockerignore` rules below, and verify by enumerating
-      the image rather than by reading the patterns.
-    - **The build arg is named `CHECK_EPOCH` in `Dockerfile.lint` too**, not
-      `LINT_EPOCH` or any other per-file name, and `script/lint` passes it under
-      that name. Both files guard the same failure under the same contract, and
-      the single name is what lets a reviewer grep a repo for `CHECK_EPOCH` and
-      see every cache-bust it has. Rename it in one file and that grep silently
-      misses it, so a renamed guard and an absent guard read identically without
-      opening both Dockerfiles.
-    - **The formatting check runs in exactly one of the two images, and either
-      one is allowed.** The canonical `Dockerfile` above runs `script/fmt-check`
-      because that is where the non-lint checks live. A repo may instead run its
-      formatter in `Dockerfile.lint` beside the linters, which is the better
-      shape wherever the formatter is the same pinned dependency as the linter
-      (`prettier` out of `node_modules`, say), because it takes the last host
-      toolchain off the checked path for the same reason the linter came off it.
-      What is not allowed is running it in neither image, or in both. Whichever
-      image runs it carries the epoch guard, and `script/check` still runs all
-      three targets on the developer's side either way.
-    - **Keep `golangci-lint config verify`, and it costs no network.** The two
-      commands catch **disjoint** classes of defect, measured under the pinned
-      v2.12.2 against a config carrying one planted defect at a time: a bogus
-      top-level key and a bogus key nested under `linters.settings.lll` both
-      pass `golangci-lint run` with **exit 0 and `0 issues`** while
-      `config verify` exits 3 and names the key; an invalid value type fails
-      both; an unknown linter name fails `run` and passes `config verify`. So
-      `run` alone silently ignores an unknown key, which is exactly the mode
-      where a threshold reads as configured and is not applied. The earlier
-      caution that `config verify` resolves its JSON schema over a live HTTPS
-      fetch does **not** hold for this pinned version: every case above was
-      re-run under `docker run --network none` and produced byte-identical
-      diagnostics and exit statuses, in a container where
-      `getent hosts golangci-lint.run` exits 2. The schema is embedded in the
-      pinned binary. Re-run that control when bumping the pin rather than
-      treating the result as permanent.
-    - **No repo installs a linter on the host, in `script/bootstrap` or anywhere
-      else.** A host install is now dead weight whose only remaining effect is
-      to reintroduce the version skew above.
-    - **`script/check` still runs `test`, `lint` and `fmt-check`**, so a
-      developer and the pre-commit hook get all three. It therefore requires a
-      docker daemon, and it must never be invoked from inside a build stage —
-      see the `Dockerfile` rule above.
-    - If the project uses `//go:embed` directives referencing build artifacts
-      (e.g. a web frontend compiled elsewhere), `Dockerfile.lint` must create
-      placeholder files so the directives resolve:
-      `RUN mkdir -p web/dist && touch web/dist/index.html`. It must not depend
-      on the real build output; it exists to fail fast.
-    - If linting requires CGO or system libraries (e.g. `vips-dev`), install
-      them in `Dockerfile.lint`.
-
-    **What a consuming repo does to adopt this**, in order: add
-    `Dockerfile.lint`; replace `script/lint` with the build above; delete the
-    `lint` stage from its `Dockerfile` along with the
-    `COPY --from=lint ... /dev/null` ordering line; change that `Dockerfile`'s
-    `RUN make check` to `script/test` and `script/fmt-check` with the comment
-    explaining why; add `script/lint` as the first step of `script/cibuild`;
-    delete any golangci-lint install from `script/bootstrap`; and delete the
-    `.lint-cache/` entries from `.gitignore` and `.dockerignore` together with
-    the per-checkout cache/lock wrapper they served.
-
-    **The separate lint _stage_ is superseded by this and must not survive
-    alongside it.** It ran `make lint`, which is now a docker build, so keeping
-    it is not a stylistic preference but a recursion. Its purpose — fail-fast
-    feedback before the slow build — is served by `script/cibuild` running
-    `script/lint` first, and its `COPY --from=lint /src/go.sum /dev/null`
-    ordering trick, along with the warm-cache re-proof that trick required, is
-    no longer needed because the ordering is now sequential in the shell.
-
-- **The canonical Go repo `Dockerfile`**, which builds and tests but does not
-  lint:
+    and `Dockerfile.lint`, the standalone path for a developer host:
 
     ```dockerfile
+    # Lint-only image, built by script/lint when not already in a container.
+    # golangci/golangci-lint:v2.12.2 (Debian-based), 2026-08-07
+    FROM golangci/golangci-lint@sha256:5cceeef04e53efe1470638d4b4b4f5ceefd574955ab3941b2d9a68a8c9ad5240
+
+    WORKDIR /src
+    ENV LINT_IN_CONTAINER=1
+
+    COPY go.mod go.sum ./
+    RUN go mod download
+
+    COPY . .
+
+    # ARG after the dependency layer so only the lint re-runs.
+    ARG CHECK_EPOCH
+    RUN [ -n "$CHECK_EPOCH" ] || exit 1
+    RUN echo "lint epoch: ${CHECK_EPOCH}" && \
+        golangci-lint config verify --config .golangci.yml
+    RUN make lint
+    ```
+
+    Load-bearing properties:
+    - **Detection rests on `LINT_IN_CONTAINER=1` and nothing else.** Every
+      Dockerfile in the repo sets it; a host does not. The asymmetry is the
+      whole design: a **false negative** inside a container tries a nested
+      `docker build`, finds no daemon and fails loudly, while a **false
+      positive** on a host silently lints there — the exact defect this rule
+      exists to kill. So the signal must be one only our own images can produce.
+      `/.dockerenv` is not such a signal and must not be used, even as a
+      fallback: measured, it is **absent** inside BuildKit `RUN` steps and
+      **present** on any host that is itself a container, which is the common
+      case for CI runners and agent sandboxes. It fails in both directions, and
+      one of them is the dangerous one.
+    - **`CHECK_EPOCH`, not `--no-cache`.** `docker build -f Dockerfile.lint .`
+      on an unchanged tree returns a sub-second cached success having linted
+      nothing. The `ARG` goes **after** the dependency layer so only the lint
+      re-runs; `--no-cache` would also reinstall dependencies on every lint.
+    - **Non-Go repos get the same pattern around their own linter** — `eslint`,
+      `ruff`, `prettier`, `shellcheck`. Only the base image and the native lint
+      command change.
+    - **Keep `golangci-lint config verify`, and it costs no network.** The two
+      commands catch disjoint classes, measured under the pinned v2.12.2: a
+      bogus top-level key and a bogus key under `linters.settings.lll` both pass
+      `golangci-lint run` with **exit 0 and `0 issues`** while `config verify`
+      exits 3 and names them; an invalid value type fails both; an unknown
+      linter name fails `run` and passes `config verify`. So `run` alone
+      silently ignores an unknown key — the mode where a threshold reads as
+      configured and is not applied. It needs no network: every case reproduced
+      byte-identically under `docker run --network none`, in a container where
+      `getent hosts golangci-lint.run` exits 2. The schema is embedded in the
+      pinned binary. Re-run that control when bumping the pin.
+    - **A failed `script/lint` that names no finding is not a lint result.** On
+      the host path `docker build` exits 1 both for findings and for a build
+      that never got there (daemon down, image unpullable, disk full). BuildKit
+      names the failing step; read it, fix the environment, re-run. Do not
+      record a verdict from a run that did not lint.
+
+    **Scope: this rule is about linters, and a formatter is not one.**
+    `script/fmt` writes your working tree, so it can only run on the host, and
+    `script/fmt-check` is its read-only twin. In a repo whose formatter **is**
+    its linter (prettier over markdown; this repo), `script/bootstrap` therefore
+    installs the linter on the host as an ordinary dependency and
+    `script/fmt-check` runs it there. That is accepted: the version is pinned in
+    `package.json` and installed into the repo's own `node_modules`, so there is
+    no shared content-keyed cache, no host-global lock and nothing to skew
+    against. What is forbidden is taking a **lint verdict** from it —
+    `script/lint` stays the only source of one. A repo auditing itself will see
+    those hits and should leave them; anything else the grep finds is a real
+    second path to the linter and goes.
+
+    **What a consuming repo does to adopt this**, in order:
+    1. Add `Dockerfile.lint`.
+    2. Replace `script/lint` with the form above, with its own native lint
+       command.
+    3. Add `ENV LINT_IN_CONTAINER=1` to **every** stage of every Dockerfile that
+       runs checks — the lint stage and the build stage both.
+    4. Delete any golangci-lint install from `script/bootstrap`, with its
+       version and ref variables and its call site. Nothing on the host lints,
+       so it can only reintroduce version skew. A JS repo's `yarn install`
+       stays.
+    5. Delete the per-checkout lint state: `GOLANGCI_LINT_CACHE` and `TMPDIR`
+       exports, `--allow-serial-runners`, the retry/VOID wrapper, and
+       `.lint-cache/` from both `.gitignore` and `.dockerignore`.
+    6. Verify by running `make lint` twice on an unchanged tree: the lint layer
+       must be `DONE` both times, never `CACHED`. Then plant a violation,
+       confirm it fails naming the finding, revert. A bare
+       `docker build -f Dockerfile.lint .` must fail on the guard.
+
+    `script/check`, `script/cibuild`, `script/docker` and the `Dockerfile` are
+    unchanged by this: `make check` still runs inside the image, and
+    `script/lint` there takes the native path.
+
+- **Dockerfiles must use a separate lint stage for fail-fast feedback.** Go
+  repos use a multistage build where linting runs in an independent stage based
+  on the `golangci/golangci-lint` image (pinned by hash), so lint failures
+  surface in seconds rather than after a full compile. The build stage declares
+  an explicit dependency on it via `COPY --from=lint /src/go.sum /dev/null`,
+  which forces BuildKit — which runs stages in parallel by default — to finish
+  linting first. The canonical Go repo `Dockerfile`:
+
+    ```dockerfile
+    # Lint stage — fast feedback on formatting and lint issues
+    # golangci/golangci-lint:v2.x.x, YYYY-MM-DD
+    FROM golangci/golangci-lint@sha256:... AS lint
+    WORKDIR /src
+    ENV LINT_IN_CONTAINER=1
+    COPY go.mod go.sum ./
+    RUN go mod download
+    COPY . .
+    ARG CHECK_EPOCH
+    RUN [ -n "$CHECK_EPOCH" ] || exit 1
+    RUN echo "check epoch: ${CHECK_EPOCH}" && make fmt-check
+    RUN make lint
+
     # Build stage
     # golang:1.x-alpine, YYYY-MM-DD
     FROM golang@sha256:... AS builder
     WORKDIR /src
+    ENV LINT_IN_CONTAINER=1
+
+    # Force BuildKit to run the lint stage before proceeding
+    COPY --from=lint /src/go.sum /dev/null
+
     COPY go.mod go.sum ./
     RUN go mod download
     COPY . .
-
     ARG CHECK_EPOCH
     RUN [ -n "$CHECK_EPOCH" ] || exit 1
-
-    # The individual non-lint checks, NOT `make check`: script/lint is a
-    # docker build (Dockerfile.lint), so `make check` here would nest a
-    # build inside a build step, where there is no daemon. Lint is not
-    # skipped — script/cibuild runs it first, in its own container.
-    RUN echo "check epoch: ${CHECK_EPOCH}" && make fmt-check
-    RUN make test
+    RUN echo "check epoch: ${CHECK_EPOCH}" && make test
 
     # VERSION comes from the host via --build-arg; see the git-describe rule
     # below. Never run `git describe` here: .dockerignore excludes .git, so
@@ -426,40 +392,48 @@ style conventions are in separate documents:
     ```
 
     Key points:
-    - Tests run in the build stage because they may require compiled artifacts
-      or heavier dependencies.
-    - `ARG CHECK_EPOCH` must be declared in **every** stage containing a
-      check-running `RUN`, because `ARG` is stage-scoped: declaring it in one
-      stage leaves the others frozen at their last cached result while the fix
-      reviews as complete. In each such stage the guard sits immediately below
-      the `ARG`, and the value is expanded into the first check `RUN` so the
-      cache miss does not rely on BuildKit's unreferenced-`ARG` handling. Both
-      lines reference `$CHECK_EPOCH`, so each stage has two independent
-      invalidation points. Later `RUN`s in the same stage need no expansion of
-      their own: their parent layer is already busted.
-    - `ARG VERSION=dev` is declared in the build stage, and its value is
-      supplied on the host by `script/docker` and `script/cibuild` via
-      `--build-arg VERSION=...`. The `dev` default is a placeholder for a local
-      build, not a source of truth. **No stage may call `git describe`**:
-      `.dockerignore` excludes `.git`, so it yields an empty version without
-      failing. See the git-describe rule further down.
+    - The lint stage uses the `golangci/golangci-lint` image directly (it has
+      both Go and the linter), so nothing needs installing. `make lint` there
+      runs `script/lint`, which sees `LINT_IN_CONTAINER=1` and invokes
+      `golangci-lint` natively instead of building `Dockerfile.lint`. Without
+      that `ENV` the stage would attempt a nested build and fail.
+    - `COPY --from=lint /src/go.sum /dev/null` is a no-op copy that exists only
+      to create the stage dependency; without it a lint failure might not fail
+      the overall build.
+    - **Re-prove that ordering on a warm cache after adopting `CHECK_EPOCH`.**
+      The cache-bust turns the no-op `COPY` into a content-cache hit, so an
+      ordering guarantee established cold does not automatically carry over. It
+      was re-proved in another org repo using the same trick and held, but that
+      result does not transfer by assumption — re-check it warm.
+    - If the project uses `//go:embed` referencing build artifacts, the lint
+      stage must create placeholders so the directives resolve:
+      `RUN mkdir -p web/dist && touch web/dist/index.html`.
+    - If linting needs CGO or system libraries (e.g. `vips-dev`), `apk add` them
+      in the lint stage.
+    - Tests run in the build stage, not the lint stage: they may need compiled
+      artifacts or heavier dependencies.
+    - `ARG CHECK_EPOCH` appears in **both** stages, because `ARG` is
+      stage-scoped: declaring it only in the lint stage leaves `make test`
+      frozen at its last cached result. In each stage the guard sits immediately
+      below the `ARG` and the value is expanded into the first check `RUN`.
+      Later `RUN`s in the same stage need no expansion; their parent layer is
+      already busted.
+    - `ARG VERSION=dev` is declared in the build stage and supplied by
+      `script/docker` and `script/cibuild`. **No stage may call
+      `git describe`**: `.dockerignore` excludes `.git`, so it yields an empty
+      version without failing. See the git-describe rule further down.
 
 - Every repo should have a Gitea Actions workflow (`.gitea/workflows/`) that
-  runs `script/cibuild` on push. `script/cibuild` runs **two** container builds:
-  `script/lint` (`Dockerfile.lint`) first, then
-  `docker build --build-arg CHECK_EPOCH="$epoch" --build-arg VERSION="$version" .`
-  for the main image, which runs the non-lint checks. A successful
-  `script/cibuild` therefore implies all checks pass; **a successful
-  `docker build .` on its own does not, because it never lints.** That is the
-  one claim to be careful with when reading these files: the guarantee belongs
-  to `script/cibuild`, not to any single Dockerfile. Both halves of it hold only
-  because each build passes its own `CHECK_EPOCH` nonce — without it an
-  unchanged tree serves the layers from cache and the build reports a green it
-  never earned. A bare `docker build .` or `docker build -f Dockerfile.lint .`
-  fails closed by design, on the `[ -n "$CHECK_EPOCH" ]` guard; always go
-  through `script/cibuild`, `script/docker` or `script/lint`. Never accept a
-  pass as evidence without confirming it ran: a sub-second wall time, or
-  `CACHED` on a check or lint layer, means nothing was executed.
+  runs `script/cibuild` (which runs
+  `docker build --build-arg CHECK_EPOCH="$epoch" --build-arg VERSION="$version" .`)
+  on push. The Dockerfile runs `make check`, so a successful build implies all
+  checks pass — but that implication holds **only** because of the `CHECK_EPOCH`
+  cache-bust described above. Without it, an unchanged tree serves the check
+  layer from cache and the build reports a green it never earned. A bare
+  `docker build .` fails closed by design, on the `[ -n "$CHECK_EPOCH" ]` guard;
+  always go through `script/cibuild` or `script/docker`. Never accept a pass as
+  evidence without confirming it ran: a sub-second wall time, or `CACHED` on the
+  check layer, means nothing was executed.
 
 - Use platform-standard formatters: `black` for Python, `prettier` for
   JS/CSS/Markdown/HTML, `go fmt` for Go. Always use default configuration with
@@ -571,22 +545,14 @@ style conventions are in separate documents:
   inflates by a multiple of the repo, and another session's unreviewed,
   sometimes uncommitted work can be copied into an image layer. The directory is
   also created and destroyed constantly, so it invalidates `COPY . .` for
-  reasons that have nothing to do with the repo's own content. **And because
-  `Dockerfile.lint` and `Dockerfile` run their tooling over the copied context,
-  a worktree that reaches it is linted and tested as though it were the repo.**
-  Nothing else stops that: language toolchains discover files by walking the
-  tree and do not read `.gitignore`, which is how `sneak/quak` saw a nested
-  `.claude/` worktree take its discovered test count from 210 to 1050
-  (https://git.eeqj.de/sneak/quak/issues/30). This entry is therefore a
-  correctness precondition of the containerised-lint rule above and not a size
-  optimisation — without it the foreign-tree false reds that rule exists to end
-  simply move inside the container. In `.gitignore` the entry is `.claude/`,
-  unanchored, which already matches at every depth. In `.dockerignore` it is
-  `.claude`, anchored and with **no** `**/` prefix: the directory occurs exactly
-  once **where agents run at the repo root**, and the prefixed form would also
-  match any nested directory of that name and delete it from the build. It is
-  not case-folded the way the secret patterns are, because tooling creates it in
-  exactly one spelling, so a folded pattern would add no coverage.
+  reasons that have nothing to do with the repo's own content. In `.gitignore`
+  the entry is `.claude/`, unanchored, which already matches at every depth. In
+  `.dockerignore` it is `.claude`, anchored and with **no** `**/` prefix: the
+  directory occurs exactly once **where agents run at the repo root**, and the
+  prefixed form would also match any nested directory of that name and delete it
+  from the build. It is not case-folded the way the secret patterns are, because
+  tooling creates it in exactly one spelling, so a folded pattern would add no
+  coverage.
 
     **Known gap that comes with the anchored form.** The directory is created in
     the agent's working directory, so the "exactly once, at the root" premise is
@@ -694,23 +660,21 @@ style conventions are in separate documents:
   (`golangci/golangci-lint@sha256:5cceeef04e53efe1470638d4b4b4f5ceefd574955ab3941b2d9a68a8c9ad5240`,
   which reports
   `golangci-lint has version 2.12.2 built with go1.26.2 from c0d3ddc9`). That
-  digest is the only pin there is: the linter is not installed on the host, in
-  `script/bootstrap` or anywhere else. Bumping the version means changing that
-  one digest, and it propagates to every consumer of the image with no host
-  state able to disagree with it.
+  digest is the only pin: golangci-lint is not installed on the host by any
+  repo. Bumping the version means changing that one digest.
 
-- **`script/bootstrap` must not install a linter at all.** This supersedes the
-  pinned-golangci-lint install that used to be canonical here. Nothing runs a
-  linter on the host any more — `script/lint` is a container build — so a host
-  install has no caller left, and its only remaining effect is to put a second,
-  independently-versioned linter on the machine where somebody will eventually
-  run it by hand and believe the result. The version-skew failures that install
-  was written to close (a local `make check` green while `make docker` rejected
-  the same commit with six `goconst` findings; a container linter surfacing
-  thirteen findings the host run missed) are closed more completely by having
-  exactly one linter, pinned by image digest, that no host state can shadow.
-  Repos adopting the containerised lint delete the install block, its version
-  and ref variables, and its call site from `script/bootstrap`.
+- **`script/bootstrap` must not install golangci-lint.** This supersedes the
+  pinned host install that used to be canonical here. `script/lint` never runs
+  it on the host — it either builds `Dockerfile.lint` or is already in a
+  container that ships the binary — so a host install has no caller, and its
+  only remaining effect is to put a second, independently-versioned linter where
+  somebody eventually runs it by hand and believes the result. Delete the block,
+  its version and ref variables, and its call site.
+
+    This is not a ban on host dependency installs generally. A JS or docs repo's
+    `script/bootstrap` runs `yarn install`, which brings its linter along with
+    every other dependency; that is unavoidable and fine. The rule is about a
+    **dedicated** linter install, and about where a verdict may come from.
 
     **The version-enforcement principle it established still applies to any
     other tool a repo pins and installs on the host**, and it is the part worth
@@ -755,28 +719,15 @@ style conventions are in separate documents:
 
     Keep it POSIX sh: no bashisms, no arrays, no `[[`, no `grep -P`.
 
-- **SUPERSEDED, and deleted rather than kept: the per-checkout
-  `GOLANGCI_LINT_CACHE`/`TMPDIR` wrapper for `script/lint`.** Every line of it
-  was about making a linter run on a shared host trustworthy — a private result
-  cache so a byte-identical checkout could not serve its findings, a private
-  `TMPDIR` so the host-global lock could not collide, retry and VOID handling so
-  a lock collision was never reported as findings. The containerised-lint rule
-  above removes the host run itself, so there is nothing left for that wrapper
-  to isolate, and a repo carrying both would carry two contradictory canonical
-  `script/lint` forms. Its findings are not lost: they are the evidence for
-  containerising, and they are recorded in that rule. Repos that adopted it
-  delete the wrapper, the `.lint-cache/` entries from `.gitignore` and
-  `.dockerignore`, and the `--allow-serial-runners` flag with them.
-
-    Two of its conclusions are kept because they outlive it. **`GOCACHE` does
-    not need isolating**, measured rather than assumed: it is content-addressed,
-    its entries are compiled artifacts rather than diagnostics carrying a
-    foreign tree's paths, and it has no equivalent global lock — the whole fleet
-    compiles concurrently against one `GOCACHE` all day without a contention
-    error. And **verifying any change to lint plumbing requires paired
-    controls**: a control that passes against the broken form proves nothing,
-    and it must be run against the artifact as a consuming repo would adopt it —
-    the file executed, not the functions sourced and driven by hand.
+- **Superseded: the per-checkout `GOLANGCI_LINT_CACHE`/`TMPDIR` wrapper for
+  `script/lint`.** It existed only to make a host lint run trustworthy, and the
+  containerised-lint rule above removes the host run. Delete the wrapper, the
+  `--allow-serial-runners` flag, and `.lint-cache/` from both `.gitignore` and
+  `.dockerignore`. Two of its conclusions outlive it: **`GOCACHE` does not need
+  isolating** (measured — content-addressed, no foreign paths in its entries, no
+  global lock), and **verifying lint plumbing requires paired controls** run
+  against the artifact as a consuming repo would adopt it, since a control that
+  passes against the broken form proves nothing.
 
 - **Interim rule for reading a lint result produced on the host, in a repo that
   has not yet adopted the containerised lint above.** A lint run is **VOID**

script/check

@@ -1,13 +1,6 @@
 #!/bin/sh
 # script/check: run all checks (test, lint, fmt-check). Our own
 # extension to scripts-to-rule-them-all. Must not modify any files.
-#
-# script/lint is a docker build (see Dockerfile.lint), so this script
-# requires a docker daemon. That is deliberate: it is the only way a
-# developer and the pre-commit hook get the same linter CI gets. It also
-# means this script must never be run from inside a build stage — see
-# the comment in Dockerfile, which runs the individual non-lint checks
-# for exactly that reason.
 set -eu
 
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"

script/cibuild

@@ -1,34 +1,22 @@
 #!/bin/sh
-# script/cibuild: run the CI build. Two container builds, in order:
-# script/lint (Dockerfile.lint) and then the main image, which runs the
-# non-lint checks. Both only prove anything because each passes its own
-# fresh CHECK_EPOCH nonce: without it Docker serves the check layers
-# from cache on an unchanged tree and the build exits 0 without running
-# anything.
+# script/cibuild: run the CI build. The Dockerfile runs script/check, but
+# that only proves anything because CHECK_EPOCH is a fresh nonce on every
+# invocation: without it Docker serves the check layer from cache and the
+# build exits 0 without running the suite.
 set -eu
 
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
-ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
+ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
 main() {
     cd "$ROOT"
-    # Lint first, for fail-fast feedback: it is its own container build
-    # and computes its own CHECK_EPOCH. It runs here rather than inside
-    # the main image because a docker build cannot run a docker build.
-    "$SCRIPT_DIR/lint"
-    # Assign on its own line: a failing command substitution inside an
-    # argument does not trip `set -e`, which would silently degrade the
-    # nonce to an empty constant. `$$` is required because busybox `date`
-    # drops %N without erroring.
+    # Both assignments on their own line: a failing command substitution
+    # inside an argument does not trip `set -e`, so the inline form
+    # degrades silently to an empty constant. `$$` because busybox `date`
+    # drops %N without erroring. VERSION is computed here because
+    # .dockerignore excludes .git, so `git describe` in a build stage
+    # yields an empty version without failing; the guard below is the
+    # single place the fallback is applied.
     epoch="$(date +%s%N)$$"
-    # VERSION must be computed here, on the host: .dockerignore excludes
-    # .git, so `git describe` cannot run in any build stage and fails
-    # quietly there rather than erroring. Same own-line discipline as the
-    # epoch. `|| true` keeps a failing describe from tripping `set -e`
-    # and leaves the value empty; the guard below is then the single
-    # place the fallback is applied, and it does fire — on an export with
-    # no .git, or a repo with no commits yet. `unknown` is visibly wrong
-    # in a binary in a way that an empty version is not.
     version="$(git describe --tags --always --dirty 2>/dev/null || true)"
     [ -n "$version" ] || version="unknown"
     docker build \

script/docker

@@ -11,19 +11,13 @@ ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
 
 main() {
     cd "$ROOT"
-    # Assign on its own line: a failing command substitution inside an
-    # argument does not trip `set -e`, which would silently degrade the
-    # nonce to an empty constant. `$$` is required because busybox `date`
-    # drops %N without erroring.
+    # Both assignments on their own line: a failing command substitution
+    # inside an argument does not trip `set -e`, so the inline form
+    # degrades silently to an empty constant. `$$` because busybox `date`
+    # drops %N without erroring. VERSION is computed here because
+    # .dockerignore excludes .git, so `git describe` in a build stage
+    # yields an empty version without failing.
     epoch="$(date +%s%N)$$"
-    # VERSION must be computed here, on the host: .dockerignore excludes
-    # .git, so `git describe` cannot run in any build stage and fails
-    # quietly there rather than erroring. Same own-line discipline as the
-    # epoch. `|| true` keeps a failing describe from tripping `set -e`
-    # and leaves the value empty; the guard below is then the single
-    # place the fallback is applied, and it does fire — on an export with
-    # no .git, or a repo with no commits yet. `unknown` is visibly wrong
-    # in a binary in a way that an empty version is not.
     version="$(git describe --tags --always --dirty 2>/dev/null || true)"
     [ -n "$version" ] || version="unknown"
     docker build \

script/lint

@@ -1,22 +1,29 @@
 #!/bin/sh
-# script/lint: run the linter. The linter is never installed on the host
-# and never invoked there — it runs in a container, one way, everywhere,
-# so a run cannot inherit another checkout's cache, another process's
-# lock, or a host toolchain that differs from the pinned one. Linting
-# happens as a build step (see Dockerfile.lint), so a successful build
-# is a clean lint, and it works where the docker daemon is remote and
-# bind mounts are impossible.
+# script/lint: run the linter. Inside a container, run it directly;
+# on a host, build Dockerfile.lint so it runs in one anyway. The linter
+# is never run on a developer host, where a shared result cache, a
+# host-global lock and a stale toolchain make its answer untrustworthy.
+#
+# LINT_IN_CONTAINER is set by this repo's Dockerfiles and is the ONLY
+# accepted signal. Do not add a /.dockerenv fallback: it is absent
+# inside BuildKit RUN steps and present on hosts that are themselves
+# containers, so it both misses and false-positives — and a false
+# positive silently restores host linting.
 set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
 main() {
     cd "$ROOT"
-    # Assign on its own line: a failing command substitution inside an
-    # argument does not trip `set -e`, which would silently degrade the
-    # nonce to an empty constant. `$$` is required because busybox `date`
-    # drops %N without erroring. Without a fresh nonce the lint layer is
-    # served from cache and this script exits 0 having linted nothing.
+
+    if [ "${LINT_IN_CONTAINER:-}" = "1" ]; then
+        exec yarn run prettier --check '**/*.md' \
+            --tab-width 4 --prose-wrap always
+    fi
+
+    # Own line, and `$$` because busybox `date` drops %N silently.
+    # Without a fresh nonce the lint layer is cached and this exits 0
+    # having linted nothing.
     epoch="$(date +%s%N)$$"
     docker build \
         --build-arg CHECK_EPOCH="$epoch" \