sneak/netwatch
1
0
Fork 0
Code Issues 2 Pull Requests Actions 8 Packages Projects Releases Wiki Activity

README.md rewritten sentence by sentence (closes #189) #195

Merged
clawbot merged 9 commits from readme-rewrite-189 into next 2026-10-26 08:13:00 +01:00
Conversation 16 Commits 9 Files Changed 2
+390 -553
2 changed files with 390 additions and 553 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+386 -553
View File
@@ -1,8 +1,17 @@
NetWatch is an MIT-licensed JavaScript single-page application by
[@sneak](https://sneak.berlin) that provides real-time network latency
monitoring to common internet hosts, displayed with color-coded figures and
sparkline graphs, served from a static bucket or from its Docker image, where a
small Go backend stores the measurements the page reports.
NetWatch is an MIT-licensed single-page web application by
[@sneak](https://sneak.berlin) that shows the latency from your browser to 26
well-known internet hosts. The page is JavaScript and does all its measuring in
the browser. A small Go backend, `netwatch-server`, stores the measurements the
page reports. The page and the backend ship together in one Docker image.
## Rationale
When a network misbehaves, it helps to see at a glance which hosts answer and
how fast. NetWatch is one page with a latency figure and a small graph for each
host, refreshed every few seconds. The page measures from the browser, so it
shows the path your own traffic takes. It can be served from any static file
host. The backend only stores what the page reports. Without it, the page works
the same and nothing is stored.
## Getting Started
@@ -10,10 +19,10 @@ small Go backend stores the measurements the page reports.
# Install the dependencies and the git pre-commit hook
make setup
# Run the page on the Vite dev server
# Serve the page from the Vite dev server
make dev
# Build netwatch-server and run it on port 8080
# Build the page and netwatch-server, then run the server on port 8080
make run
# Run the tests, both linters and the format check
@@ -22,593 +31,417 @@ make check
# Build the page into dist/ and netwatch-server into the repo root
make build
# Build the image and run it
# Build the Docker image and run it
make docker
docker run -p 8080:8080 netwatch
```
`make check` and `make docker` need Docker. `make dev` passes `/api` to
`http://127.0.0.1:8080`, where `make run` starts `netwatch-server` with its
defaults, so the reports the page posts are stored in `data/reports`.
`make check` and `make docker` need Docker. `make run` starts `netwatch-server`
on port 8080 with its defaults, so the page's reports are stored in
`data/reports`. `make dev` passes the page's `/api` requests there.
## Entrypoints
## The page
This repository adheres to the
[Scripts to Rule Them All](https://github.com/github/scripts-to-rule-them-all)
standard: normalized scripts in `script/` are the entrypoints for the
development workflow, and the Makefile targets are thin shims that call them.
The scripts cover both the frontend and the Go backend, so `make check` fails if
either one is broken. We provide:
The page shows one row per host: the host's name, its URL, its latest latency in
milliseconds and a graph of its last 100 checks. Below the figure are the
minimum, median, average and maximum of the host's answers in that history, or
`timeout` or `unreachable` after a failed check. A round of checks runs every 3
seconds by default. The header shows the interval, the history's span, and
whether the page is running or paused.
- `script/bootstrap` — install all dependencies (the pinned node via nvm unless
the `node` on `PATH` has the pinned major version and is new enough for the
frontend's dependencies, yarn `YARN_VERSION` via corepack, or npm where there
is no corepack, unless the `yarn` on `PATH` is exactly that version,
`yarn install --frozen-lockfile`, Go `GO_VERSION` unless the `go` on `PATH` is
exactly that version, and the Go modules), linking what it installs itself
into `~/.local/bin`, which has to be on `PATH`. It installs no Go linter and
not Docker: `make test` and `make lint` run in Docker
- `script/setup` — make a fresh clone ready for development: bootstrap plus the
git pre-commit hook
- `script/dev` — run the Vite dev server, which proxies `/api` to a locally
running `netwatch-server`
- `script/build` — build the frontend for production into `dist/`, then the
static `netwatch-server` binary into the repo root with its version stamped
in: `VERSION` from the environment, or when that is unset or empty,
`git describe --tags --always --dirty` inside a git checkout, as
`script/docker` does, then `dev`
- `script/run` — build with `script/build`, then run `netwatch-server` with its
defaults (see [Settings](#settings))
- `script/clean` — remove what `script/build` writes
- `script/projectname` — print the project name (used for the Docker image tag)
- `script/yarn` — run yarn with the given arguments under the node
`script/bootstrap` would use: with `~/.local/bin` first on `PATH`, the first
`node` on that `PATH` when it has the pinned major version and is new enough
for the frontend's dependencies, and otherwise the pinned node in nvm. Every
script that runs yarn on the host runs it through this one, except
`script/bootstrap`, which picks its own node and yarn
- `script/test` — build the `test` phase of `Dockerfile`, writing no image: the
frontend's unit tests in its `frontend-test` stage, and the backend's Go tests
with the race detector and coverage. The frontend's production build is left
to the image build, in the `frontend-build` stage
- `script/lint` — build the `lint` phase of `Dockerfile`, writing no image:
eslint in its `frontend-lint` stage, and golangci-lint over the Go packages
- `script/fmt` — format all files (writes): prettier over the JavaScript, CSS,
HTML and Markdown, then gofmt over `cmd/` and `internal/`. It runs on the
host, as `script/fmt-check` does, with `~/.local/bin` put on `PATH`
- `script/fmt-check` — check formatting (read-only): prettier, then gofmt
- `script/check` — run test, lint, and fmt-check
- `script/add-dependency` — add a frontend package, or move one to another
version: `make add-dependency PACKAGE=<name>@<version>` runs `yarn add --dev`,
which changes `package.json` and `yarn.lock` together, then
`yarn install --frozen-lockfile`
- `script/tidy` — run `go mod tidy`: to add a Go module, import it and run
`make tidy`; to move one to another version, edit its `require` line in
`go.mod`, then run `make tidy`
- `script/frontend-test` — run the unit tests in `test/unit/` on the host with
Node's built-in test runner, through the `test` script in `package.json`, and
if any fails, run them again listing every test, and fail; then the production
build. Each test run has a 90-second timeout. `make test` runs the same tests
in Docker, without the production build
- `script/frontend-fmt` — format the JavaScript, CSS, HTML and Markdown with
prettier (writes)
- `script/frontend-fmt-check` — check prettier formatting (read-only)
- `script/frontend-viewport-test` — responsive-layout verification of the built
frontend in a containerised headless Chrome (see
[test/viewport/README.md](test/viewport/README.md)). Before the browser
starts, it checks that the page, and a path that falls back to it, are served
with `Cache-Control: no-cache` and `Content-Security-Policy`. Not part of
`script/check`: it takes minutes.
- `script/docker` — build the image from `Dockerfile`, tagged `netwatch` via
`script/projectname`
- `script/cibuild` — CI entrypoint: runs `script/bootstrap` and `script/check`,
then builds the image as `script/docker` does
- `script/precommit` — run by the git pre-commit hook; runs `script/check`
- `script/install-precommit` — install the git pre-commit hook
### Targets
`script/test`, `script/lint`, `script/docker` and `script/cibuild` each pass a
new `CACHEBUST` value, so every step in `Dockerfile` that lints, tests or
compiles runs again even when nothing has changed. Docker keeps the system
packages and the Go modules from earlier builds until the base image, the step
that installs them, or `go.mod` and `go.sum` change. The `frontend-build` stage
is the exception: it installs git again on every image build, because it starts
from the `frontend-test` stage, whose steps run again on every build. Go's build
cache and golangci-lint's are kept as well, and each reuses a result only when
everything it was made from is unchanged. Both `go test` runs carry `-count=1`,
so no test result is reused. The yarn packages are installed again on every
build.
The page checks 26 hosts on the internet, the WAN hosts:
## Responsive layout
- `datavi.be`, pinned to the top at start
- the Anthropic API and the OpenAI API
- the AWS Console, the Google Cloud Console and Microsoft Azure
- Cloudflare, Fastly, Akamai, Google, GitHub and Backblaze B2
- 8 S3 regional endpoints: Cape Town, London, Bahrain, Tokyo, Singapore, Sydney,
Oregon and São Paulo
- 6 Hetzner speed-test servers: Nuremberg, Falkenstein, Helsinki, Ashburn,
Hillsboro and Singapore
The narrow-viewport layout lives in the `max-width: 768px` media block in
`web/src/styles.css`. It is verified automatically by
`make frontend-viewport-test`, which drives a digest-pinned headless Chrome
against the built `dist/` and asserts on computed layout at widths derived from
that CSS — on every breakpoint it declares and one pixel either side of it, plus
a 320px floor, a desktop baseline and two landscape sizes. See
[test/viewport/README.md](test/viewport/README.md) for what it covers and what
it genuinely cannot.
Two local targets follow under the heading "Local Network", left out of the
summary and the health box. `Local CPE` is the cable modem at
`http://192.168.100.1`. `Local Gateway` is the first of `http://192.168.1.1`,
`http://192.168.0.1`, `http://192.168.8.1` and `http://10.0.0.1` to answer
within 1.5 seconds of the page loading; with no answer, it has no row. Browsers
block a page served from a public address from reaching private addresses. So
the local targets answer only when the page is served from `localhost` or from a
private address.
## Rationale
The host list is written in `web/src/main.js`; there is no setting for it.
When debugging network issues, it's useful to have a persistent at-a-glance view
of latency and reachability to multiple well-known internet endpoints. NetWatch
provides this as a single page that does all its measuring in the browser, so it
can be served from anywhere static files are served. The backend in its Docker
image only stores the measurements the page reports; without it, the page works
the same and nothing is stored.
### What a figure measures
## Design
A check is a request to the target's URL: `GET`, or `HEAD` for the S3 regions.
The figure is the time from sending the request until the response headers
arrive, in milliseconds. Unlike ping, it includes the time the server takes to
answer. On a new connection it also includes the DNS lookup, the connection
setup and the TLS handshake. Any answer counts as reachable, an error page
included. The browser follows redirects, so a target whose home page redirects
is checked at `/robots.txt` on the same host.
The page's source is in `web/`, the Go backend's in `cmd/` and `internal/`, and
nginx's configuration in `configs/`.
A check times out after 80% of the interval: 2.4 seconds at the default. A check
that answers after that limit counts as a timeout too. A check that fails with a
network error is recorded as unreachable. The first round after the page loads
is discarded, as its figures include the connection setup. So is the first round
after an interval change.
The page is built with Vite and Tailwind CSS v4. Its code is all in
`web/src/main.js`, with a class-based architecture:
### Health and summary
- **`CONFIG`**: Configuration object (update interval, timeouts, axis ticks,
etc.). The interval menu sets `updateInterval`, the one value the page writes
into `CONFIG`; the timeouts, the time the history spans and the x-axis ticks
are computed from it
- **`HostState`**: Per-host state management — history buffer, latency tracking,
status transitions
- **`AppState`**: Top-level state container — WAN hosts, local hosts, pause
state, aggregate stats
- **`SparklineRenderer`**: Canvas 2D sparkline drawing with fixed axes,
color-coded line segments, error regions, and DPR-aware scaling
- **UI functions**: `buildUI()` constructs the DOM, `updateHostRow()` /
`updateSummary()` / `updateHealthBox()` handle incremental updates
- **`tick()`**: Main loop — measures all hosts in parallel, pushing each host's
sample and redrawing its row as soon as its check ends, then redraws every
row, the summary and the health box once the last check ends. The first round,
after loading or an interval change, is discarded. The rows are sorted when
the last check ends in round 2, the first one kept, and in rounds 11, 21, 31
and so on. When paused, pushes blank markers (no probes, no false outage)
- **`Reporter`**: Posts collected samples to the backend
Above the rows, a health box sums up the WAN hosts' latest results. A host
counts as failed when its last check timed out or found it unreachable.
### Reporting
- `OFFLINE` (red): more than 10 hosts failed and at most 4 answered
- `DEGRADED` (orange): otherwise, more than 4 hosts failed
- `SLOW` (yellow): otherwise, more than 3 hosts took over 1000 ms
- `HEALTHY` (green): otherwise
Every `reportInterval` (default 60s) the page POSTs a JSON report to the
same-origin path `/api/v1/reports`: a random per-browser `clientId` kept in
`localStorage`, `geo` sent as null, and each host's unreported, non-paused
samples (timestamp, latency, error). A per-host high-water mark makes every
report a delta, so only new samples are sent; the mark advances only on a
delivered report, and while paused nothing is sent. Changing the interval clears
each host's history on the page; the samples in it not yet reported still go in
the next report. Delivery failure is quiet — one debug-log line per outage,
never blocking probing. The report-building step is a pure function of host
state.
Below it, a summary line covers the WAN hosts only:
A sample in the history that no report has delivered is sent only as long as the
history holds it, so after a refused or failed report the next report carries
the samples the history still has. Samples an interval change cleared from the
history are kept apart, the last 100 per host, until they are delivered. The
history keeps each host's last 100 rounds: 100 seconds at the 1-second interval,
200 seconds at 2 seconds, 5 minutes at the default of 3 seconds and 100 minutes
at 60 seconds. At 1 second, one refused or failed report loses the oldest 20
seconds of each host's samples, as the next delivered report comes 2 minutes
after the last. At 2 seconds and longer one loses nothing; samples are lost from
the third refused report in a row at 2 seconds, from the fifth at 3 seconds, and
later still at the longer intervals.
- `Reachable`: how many of the 26 answered their last check
- `Now`: the minimum, median, average and maximum of their latest figures
- the history's span, such as `5m`: the minimum and maximum over the whole
history
- `Checks`: the rounds run since the page loaded or the interval changed
No report is sent while the page is paused, but each paused round still adds an
entry to the history, so each report due during a pause counts as a refused one.
A pause longer than the history spans loses the samples in the history recorded
between the last delivered report and the pause: up to a minute's worth for each
host if the report before the pause was delivered.
When no WAN host answers, the page checks 4 of them, picked at random, every
half second. As soon as one answers, a new round starts.
### Backend
### Rows, colors and controls
`netwatch-server` is a small Go HTTP server that stores the reports the page
posts. It keeps them in memory and writes them to `DATA_DIR` as zstd-compressed
files of JSON lines: every minute, whenever 10 MiB are waiting, and when it
stops. Its routes:
A figure and its line in the graph take the color of the legend in the footer,
from green under 50 ms to red from 500 ms up; gray is no answer. The graph's
axis ends at 1000 ms; a higher latency is drawn at the top, and the figure still
shows its real value.
- `POST /api/v1/reports` — takes a report, without credentials; each client
address may send a limited number a minute, and the report files are capped in
size, the oldest deleted first
- `GET /.well-known/healthcheck` — answers 200 with `"status":"ok"`, the
server's version and its uptime; while reports cannot be stored, as the last
write of a report file failed, it answers 503 with `"status":"error"` and the
same fields (see [Report storage](#report-storage))
- `GET /metrics` — Prometheus metrics behind basic auth, only when
`METRICS_USERNAME` and `METRICS_PASSWORD` are set; each client address may
make a limited number of requests to it a minute
From time to time, the page sorts the WAN rows by their latest latency: fastest
first, failed last. The pin button at the left of a row keeps the row at the
top; pinned rows are sorted by name. `datavi.be` is pinned at start.
It is an `fx`-wired Go application: `cmd/netwatch-server/` starts it, and its
packages are in `internal/`:
`Pause` stops the checks: the graphs keep scrolling with a gap for each paused
round, and the figures turn gray. The `Interval` menu sets the time between
rounds: 1, 2, 3, 5, 10, 15, 30 or 60 seconds. Changing it clears the history and
starts a new round at once. The `Debug log` checkbox in the footer opens a panel
with the page's last 1000 log lines.
- **`cli`**: Runs `netwatch-server` from its command line: the `check-cidr` and
`prepare-data-dir` subcommands, which `bin/entrypoint.sh` runs before it
starts the server, and, given no arguments, the server, with the `fx` wiring.
It refuses any other arguments with a usage message and exit code 2.
- **`config`**: Loads configuration from environment variables and config files
via Viper.
- **`handlers`**: HTTP request handlers for the API (health check, report
ingestion).
- **`reportbuf`**: The in-memory buffer of reports and the files it writes them
to.
- **`server`**: Chi-based HTTP server with middleware wiring and route
registration.
- **`healthcheck`**, **`middleware`**, **`logger`**, **`globals`**: Supporting
infrastructure.
## Reporting
In the image, the `test` phase of `Dockerfile` tests it, the `builder` stage
builds it, and `bin/entrypoint.sh` runs it as user `netwatch` on
`127.0.0.1:8081`, behind nginx (see [Deployment](#deployment)). Outside the
image, `make run` builds it and runs it on port 8080.
Every 60 seconds the page posts its undelivered samples as a report to
`/api/v1/reports` on the origin it was served from. The report is JSON with four
fields:
#### Settings
- `clientId`: a random id, made once per browser and kept in `localStorage`, or
once per session when the browser has no usable storage
- `geo`: always `null`
- `hosts`: one entry per host with new samples: its `name`, `url` and `status`,
and `history`, its samples. A sample has the check's time `t` in Unix
milliseconds, its `latency` (`null` for a failed check) and its `error`
(`"timeout"`, `"unreachable"` or `null`).
- `timestamp`: the time of the report
| Variable | Default | Description |
| ---------------------- | -------------------- | -------------------------------------------------------------------------------------------------------- |
| `BIND_ADDRESS` | empty | IP address to listen on; empty listens on every interface |
| `PORT` | `8080` | HTTP listen port |
| `DATA_DIR` | `./data/reports` | Directory for compressed reports |
| `DATA_DIR_MAX_BYTES` | `1073741824` (1 GiB) | Most bytes of report files kept in `DATA_DIR`, oldest deleted first; see [Report limits](#report-limits) |
| `DEBUG` | empty | Debug logging; any non-empty value, `false` and `0` included, turns it on |
| `TRUSTED_PROXIES` | RFC 1918 ranges | Comma-separated CIDRs whose `X-Forwarded-For` / `X-Real-IP` headers are trusted for client IP resolution |
| `REPORTS_PER_MINUTE` | `60` | Reports each client address may send a minute; see [Report limits](#report-limits) |
| `CORS_ALLOWED_ORIGINS` | empty | Comma-separated origins whose pages may call the API; see [CORS](#cors) |
| `METRICS_USERNAME` | empty | Basic auth user name for `/metrics`; see [Metrics](#metrics) |
| `METRICS_PASSWORD` | empty | Basic auth password for `/metrics`; see [Metrics](#metrics) |
| `SENTRY_DSN` | empty | DSN of the Sentry project to send errors to; see [Sentry](#sentry) |
Each report carries only the samples no earlier report has delivered. A sample
waits as long as the history holds it: the last 100 rounds of each host. An
interval change clears the history. The cleared samples are kept, the last 100
of each host, until a report delivers them. Nothing is sent while the page is
paused. A report with no answer after 30 seconds is abandoned, and its samples
go in the next one. So a server that stored them but answered late gets them
twice.
`TRUSTED_PROXIES` defaults to `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`. A list
replaces the default; set and empty, the server trusts no proxy. Loopback is not
in the default, so a reverse proxy on the same host has to be named, as in
`TRUSTED_PROXIES=127.0.0.1/32`. A request whose direct peer is outside this set
has its forwarded headers ignored, and the direct peer is logged and
rate-limited instead. From a direct peer inside the set, the client address is
the right-most `X-Forwarded-For` entry that is not in the set: each proxy
appends the address it took the request from, so the entries further left were
written by the client and are not used. An entry written as an address with a
port, such as `198.51.100.7:5000` or `[2001:db8::1]:443`, is read as that
address. If the search from the right finds only addresses in the set, or meets
an entry that is not an address at all, such as `unknown`, the direct peer is
used. `X-Real-IP` is read only when `X-Forwarded-For` is missing or empty. The
container image does not use this default; see [Deployment](#deployment).
A variable set to a value the server cannot use, such as `PORT=abc` or a
`BIND_ADDRESS` that is not an IP address, stops it from starting, with an error
naming the variable. An empty variable counts as unset, except
`TRUSTED_PROXIES`. No value of `DEBUG` stops the start.
#### Report storage
Reports are written as `reports-<timestamp>-<number>.jsonl.zst` files in
`DATA_DIR`. The timestamp is in UTC to the millisecond, so the names sort by
time. The number starts at 1 when the server starts and goes up by one for each
file the server starts to write, so two files written in the same millisecond
still get different names. A failed write uses up its number and leaves a gap in
the numbers: its file, if it was created, is removed. The file stays, counted
toward `DATA_DIR_MAX_BYTES` from the next start, only if removing it fails too.
Files are created with `O_EXCL` to prevent overwrites.
The reports of a failed write stay in memory, and the next flush, within a
minute, tries again to write them. The server writes one file at a time, so a
file holds its reports in the order they arrived, those of a failed write
included. From the failed write until a write succeeds, `POST /api/v1/reports`
refuses every report with 500 and keeps nothing of it, and the health check
answers 503 with `"status":"error"`. The page sends the refused samples again in
its next report, as long as it still holds them: at the 1-second interval one
refused report already loses some of those in the history (see
[Reporting](#reporting)). Reports already answered 200 are lost only if the
server stops before a write succeeds; the final flush at stop tries them too,
and if it fails, the process exits non-zero.
#### Report limits
`POST /api/v1/reports` takes reports from anyone who can reach it, without
credentials, so it is bounded instead. Each refusal below answers with the same
`{"status":"error"}` body as any other error, except nginx's refusal of a body
over the limit in the image.
- **JSON only.** A report must be sent with `Content-Type: application/json`,
parameters such as `charset` allowed, as the page sends it; any other is
refused with 415, and nothing of it is stored. A page on another origin can
send a `text/plain` POST, or a form, without a CORS preflight; refusing them
keeps any site from making its visitors' browsers store reports (see
[CORS](#cors)).
- **Body limit.** A report body may be at most 1 MiB, the backend's limit for
any request. Run on its own, the backend answers 413 before the route to a
request that declares a longer body. Without a declared length, the route
answers 413 only when the report it reads runs past 1 MiB; nothing after the
end of the report is read, so a longer body whose report ends sooner is
stored, and one that stops being valid JSON sooner is answered 400. In the
image, nginx refuses a body over 1 MiB first, with or without a declared
length, as its `client_max_body_size`, which `configs/nginx.conf` does not
set, is 1 MiB by default. nginx answers 413 with its own HTML error page, and
the backend never sees the request.
- **Rate limit.** Each client address, resolved through `TRUSTED_PROXIES`, may
send `REPORTS_PER_MINUTE` reports a minute; past that it gets 429 with
`Retry-After: 60`. The minute slides: reports from the minute before still
count, fading out over the current one, so an address is sure never to be
refused only while it sends at most half of `REPORTS_PER_MINUTE` in any 60
seconds. The page sends one report a minute from each open tab, so the default
of 60 refuses nothing from up to 30 tabs behind one address, such as a
household or an office sharing it, however their reports bunch up. Report
responses also carry `X-RateLimit-Limit`, `X-RateLimit-Remaining` and
`X-RateLimit-Reset` headers.
- **Size cap.** The report files in `DATA_DIR` may total at most
`DATA_DIR_MAX_BYTES`, counting the files already there at start. Reports
waiting in memory count at their uncompressed size until they are written,
those of a failed write included; the part of its file written is removed.
When a report would take the total past the cap, the oldest report files are
deleted to make room, and each deletion is logged with the file's name and
size; a file still being written is never deleted. A report is refused with
507, and nothing of it is stored, only when the reports waiting to be written
fill the cap on their own, and then no file is deleted. At start, report files
past the cap, as after lowering it, are deleted the same way. So the cap is
how much of the newest reports is kept: the default of 1 GiB is small enough
for any host; set it to the space you can give `DATA_DIR`.
At the defaults, one address may send 60 reports of up to 1 MiB a minute, and a
report made up to compress badly takes about as much room in the report files as
its request body, so in about 17 minutes one address can fill the 1 GiB cap with
its own reports, every report stored before them deleted to make room. Lowering
`REPORTS_PER_MINUTE` or raising `DATA_DIR_MAX_BYTES` makes that take longer.
#### CORS
The page calls the API from the origin it is served from, so by default the
server sends no CORS headers, and browsers let no other origin's pages call it.
To serve the page from elsewhere, list that origin in `CORS_ALLOWED_ORIGINS`
(for example `https://netwatch.example.com`); pages from a listed origin may
`GET` and `POST` with a `Content-Type` header. Each entry must be a plain
origin, `scheme://host` with an optional `:port`, as browsers send it: no path,
not even a trailing `/`, and no `*`. Any other entry stops the server from
starting, with an error naming `CORS_ALLOWED_ORIGINS`.
#### Metrics
With both `METRICS_USERNAME` and `METRICS_PASSWORD` set, the server serves
Prometheus metrics at `GET /metrics` to requests with those as their basic auth
credentials, and answers any other with 401. For each request that reaches the
health check or `POST /api/v1/reports`, those the rate limit refuses included,
the metrics record its duration and response size, labelled with its path,
method and status; they also count those requests in progress, and include Go's
runtime and process metrics. No other request is recorded: not those to
`/metrics` itself, and not those answered before they reach either route, such
as a CORS preflight, or a request refused with 404 for a path no route has or
405 for a method its route does not take. Run on its own, the backend also
answers 413 before the route to a request declaring a body length over the 1 MiB
limit, which is not recorded. A body over the limit sent without a declared
length reaches the route and is recorded with the status the route answers,
which is 413 only when the report it reads runs past the limit: nothing after
the end of the report is read. In the image neither reaches the backend: nginx
answers both with 413 itself (see [Report limits](#report-limits)), and nothing
of them is recorded. Clients can make up any number of paths and methods, and
each would add labels to the metrics for as long as the server runs.
`/metrics` is rate limited, so that its password cannot be guessed quickly: each
client address, resolved through `TRUSTED_PROXIES`, may make 60 requests to it a
minute, whatever their credentials. Past that it gets 429 with
`Retry-After: 60`, and its credentials are not checked. The minute slides as it
does for reports (see [Report limits](#report-limits)), so a scraper polling
every 2 seconds or less often is never refused. This allowance is apart from the
one for reports.
#### Sentry
With `SENTRY_DSN` set, each panic in a handler is reported to that Sentry
project under the release `netwatch-server-` followed by the server's version.
On shutdown the server waits up to 2 seconds for Sentry to finish sending.
### Monitoring targets
- **26 WAN hosts**: datavi.be (pinned at start), Anthropic API, OpenAI API, AWS
Console, Google Cloud Console, Microsoft Azure, Cloudflare, Fastly CDN,
Akamai, Google, GitHub, B2, 8 S3 regional endpoints (Cape Town, London,
Bahrain, Tokyo, Singapore, Sydney, Oregon, São Paulo) and 6 Hetzner speed test
servers (Nuremberg, Falkenstein, Helsinki, Ashburn, Hillsboro, Singapore)
- **Local CPE**: Cable modem at 192.168.100.1 (always monitored)
- **Local Gateway**: Auto-detected on startup by probing common default gateway
addresses (192.168.1.1, 192.168.0.1, 192.168.8.1, 10.0.0.1); first responder
wins. Note: modern browsers enforce Private Network Access restrictions that
block public-origin pages from reaching RFC1918 addresses, so local targets
only work when NetWatch is served from localhost or a private address.
Local hosts are tracked separately from WAN stats.
### Latency measurement
Each check is a GET request to the target's URL as written, with
`mode: 'no-cors'`, `cache: 'no-store'` and `referrerPolicy: 'no-referrer'`. Its
figure is the time from sending the request until the answer's headers arrive,
timed with `performance.now()`. Unlike ping, this includes the time the server
takes to answer. It also includes the DNS lookup, connection setup and TLS
whenever the browser opens a new connection. Chrome opens one for every check of
the Hetzner speed-test servers, and for more targets at longer intervals.
The S3 regions are checked with a HEAD request instead. Chrome keeps the
connection to an S3 region open after a HEAD request, but closes it after most
GET requests. The Hetzner speed-test servers do not answer a HEAD request.
The browser follows every redirect, and the figure then includes the request to
the new URL too. So a target whose home page answers with a redirect is checked
at `/robots.txt` on the same host, which answers without one. An S3 region
answers it with 403, and any answer counts as reachable.
The Hetzner speed-test servers close the connection without an answer when the
URL has a query string or the request has a `Referer` header. So no query string
is added, and no `Referer` header is sent, wherever the page is served from.
`no-store` keeps the browser's cache out of the measurement. Each check times
out after 80% of the refresh interval (24 seconds at 30 seconds) and is then
recorded as a timeout, so a round's checks have all finished before the next
round is due. When no WAN host answers, a recovery probe checks 4 WAN hosts,
picked at random when it starts, every half second, giving up the checks it
started half a second before. As soon as one answers, a new round starts at
once, as it does after an interval change. A round started early gives up the
last round's checks if they are still waiting, and that round records nothing
more, so rounds never overlap. The browser chooses between IPv4 and IPv6 for
each target, as for any request; the local targets are IPv4 addresses.
Each recorded check that fails writes one line to the browser console with
`console.error`, and the same line to the debug log: the target's name and URL,
the time, whether it timed out, answered over the time limit or hit a network
error (with the error the browser gives the page, such as
`TypeError: Failed to fetch`, which does not say why), and how long the request
took. A target that answers after failed checks writes one `console.info` line
with its latency and how many checks in a row had failed.
### Color coding
| Latency | Color |
| ----------- | ------ |
| < 50ms | Green |
| < 100ms | Lime |
| < 200ms | Yellow |
| < 500ms | Orange |
| >= 500ms | Red |
| Unreachable | Gray |
### Output structure
```
dist/
├── index.html
└── assets/
├── index-*.css
└── index-*.js
```
## Features
- A round of checks every 3 seconds by default; the interval menu sets 1, 2, 3,
5, 10, 15, 30 or 60 seconds and clears the history
- Sparklines of each target's last 100 rounds: 300 seconds at 3 seconds
- The first round after loading or an interval change is discarded, as DNS and
TLS setup inflate its latencies
- Health indicator from the WAN hosts' latest results: OFFLINE (red) when more
than 10 fail and at most 4 answer, otherwise DEGRADED (orange) when more than
4 fail, otherwise SLOW (yellow) when more than 3 take over 1000ms, otherwise
HEALTHY (green)
- Summary stats across WAN hosts only: how many answered, the min, median,
average and max of their latest latencies, the min and max over the whole
history, and the number of rounds run (`Checks`)
- Fixed chart axes: Y-axis 0–1000ms, higher latencies drawn at the top; X-axis
the time the history spans
- Color-coded latency figures and sparkline line segments
- WAN host rows sorted by latest latency, unreachable last; pinned rows stay on
top, in name order
- Play/pause: pause stops probes but history keeps scrolling (blank gaps, no
false outage)
- Debug log panel, behind a checkbox in the footer, with five levels (error,
warning, notice, info, debug) and the last 1000 lines
- Local and UTC clocks
- Clickable service URLs
- A footer link to the commit the page was built from
- Canvas-based sparkline rendering with devicePixelRatio scaling
- Zero runtime dependencies: all resources bundled into build artifacts
A failed delivery is quiet, as on a static file host with no backend: one debug
log line when deliveries start failing, one when they recover. The checks go on.
## Deployment
`make build` writes the page to `dist/`, which any static file host (S3, GCS,
Cloudflare Pages, Vercel, Netlify, GitHub Pages) can serve; with no backend
there, its reports fail quietly and nothing is stored. Or run the Docker image
behind a reverse proxy.
`make docker` builds the image `netwatch` from `Dockerfile`: the whole service
in one container. nginx serves the page and passes `/api/`,
`/.well-known/healthcheck` and `/metrics` to `netwatch-server` in the same
container. The backend listens on `127.0.0.1:8081` only, as user `netwatch` (uid
1000). `bin/entrypoint.sh` starts both and watches them.
The Docker image, built from `Dockerfile` by `make docker`, is the whole service
in one container: nginx serves the built frontend and passes `/api/`,
`/.well-known/healthcheck` and `/metrics` to the Go backend, `netwatch-server`.
`bin/entrypoint.sh` starts it listening only inside the container, on
`127.0.0.1:8081`, with `TRUSTED_PROXIES=127.0.0.1/32`, so it takes the client
address nginx passes on and no other. The image:
Before the backend starts, `bin/entrypoint.sh` runs two subcommands of
`netwatch-server`. `check-cidr` checks each `TRUSTED_PROXIES` entry (see
[Running under upaas](#running-under-upaas)). `prepare-data-dir` creates the
report directory and gives `/data`, with the directories, regular files and
symbolic links in it, to user `netwatch`. It changes nothing outside `/data`.
- Listens on port 8080 by default (override with `PORT` env var)
- Takes the client address from `X-Forwarded-For` only on requests from the
reverse proxies named in `TRUSTED_PROXIES`, by default from any address in
`10.0.0.0/8`, `172.16.0.0/12` or `192.168.0.0/16`. `bin/entrypoint.sh` checks
each entry with `netwatch-server check-cidr`, which parses it as the backend
parses its own `TRUSTED_PROXIES`
- Sends access logs to stdout
- Sends the page with `Cache-Control: no-cache`, so a browser that keeps a copy
checks with the server that it is current before using it again; only the
files under `/assets/`, whose names change whenever their contents do, are
cached as immutable
- Sends the security headers `REPO_POLICIES.md` requires on every response, as
`configs/security-headers.conf` sets them, in place of the backend's own
- Stores reports in `DATA_DIR`, `/data/reports` by default, on the `/data`
volume. Before the backend starts, the image creates `DATA_DIR` and gives it
and `/data` to user `netwatch` (uid 1000), which the backend runs as, with
`netwatch-server prepare-data-dir`, which acts on nothing outside `/data`, so
a host directory bind-mounted at `/data` ends up owned by uid 1000
- Writes buffered reports to disk on `docker stop`, and exits non-zero if nginx
or the backend exits on its own, so the platform restarts it
The image also:
## Running under upaas
- takes the client address from `X-Forwarded-For` only on a request from a proxy
named in `TRUSTED_PROXIES`, and passes that one address to the backend. The
backend is started with `TRUSTED_PROXIES=127.0.0.1/32`, so it trusts nginx
alone.
- writes nginx's access log and the backend's JSON log to stdout
- refuses a request body over 1 MiB with nginx's own 413 error page
- requests `/.well-known/healthcheck` through nginx every 30 seconds, as its
`HEALTHCHECK`. The check fails unless both nginx and the backend answer, and
while report files cannot be written.
- on `docker stop`, writes the waiting reports to disk and exits 0, or non-zero
if that write fails. If nginx or the backend exits on its own, the other is
stopped and the container exits non-zero.
What the [upaas](https://git.eeqj.de/sneak/upaas) app for netwatch needs:
### Running under upaas
- **Port:** container port `8080`.
- **Volume:** container path `/data`; the reports are kept in `/data/reports`.
- **Environment variables:** none is required. An empty one counts as unset,
except `TRUSTED_PROXIES`, and one set to a value netwatch cannot use stops the
container at start, with the reason in its log.
- `PORT`, default `8080`: the container port, from 1 to 65535. `8081` cannot
be used: the backend listens on it inside the container
- `REPORTS_PER_MINUTE`, default `60`: reports each client address may send a
minute
- `DATA_DIR_MAX_BYTES`, default `1073741824` (1 GiB): the most room the
report files may take; the oldest are deleted to stay under it
- `CORS_ALLOWED_ORIGINS`, default empty: other origins whose pages may call
the API
- `DEBUG`, default empty: debug logging; any non-empty value, `false` and
`0` included, turns it on
- `DATA_DIR`, default `/data/reports`: the directory the reports are kept
in: `/data` or a path below it, with no `.` or `..` part and no extra `/`.
The container also stops if the path goes through a symbolic link that
leads out of `/data` or is written as a full path
- `TRUSTED_PROXIES`, default `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`: the
addresses the reverse proxy in front of the container connects from, as IP
addresses or CIDRs separated by commas. nginx takes the client address
from `X-Forwarded-For` only on a request from one of them, and the rate
limit counts that address. A list replaces the default. Set and empty,
`X-Forwarded-For` is ignored and every client behind the proxy shares the
proxy's one allowance of `REPORTS_PER_MINUTE`. Any client that connects
from one of these addresses can write its own `X-Forwarded-For`, and
through a port Docker publishes, every client may connect from the Docker
network's gateway, such as `172.17.0.1`, which the default includes; where
that matters, name only the addresses nothing but the proxy connects from.
- `METRICS_USERNAME` and `METRICS_PASSWORD`, default empty: with both set,
the backend records Prometheus metrics of its requests and serves them at
`/metrics` on the container port, to requests with this user name and
password as their basic auth credentials. With neither set, there are no
metrics and `/metrics` is not found. One set without the other, or a user
name containing `:`, stops the container
- `SENTRY_DSN`, default empty: set to a Sentry project's DSN, the backend
sends its errors to that Sentry project: each request whose handling
crashes, which still gets a 500 response. A value Sentry does not accept
stops the container. Empty, the backend sends nothing to Sentry
- **Health check:** the image's `HEALTHCHECK` requests
`/.well-known/healthcheck` through nginx every 30 seconds, so it fails unless
both nginx and the backend answer. It also fails while reports cannot be
stored, as when the volume is full or `DATA_DIR` cannot be written: the health
check answers 503 from a failed write of a report file until a write succeeds,
and the backend tries the write again every minute. Three failed checks in a
row make the container `unhealthy`, and one that passes makes it `healthy`
again. upaas reads the container's health once, 60 seconds after a deploy, and
fails the deploy unless it is `healthy`. A container that turns `unhealthy`
after that is neither restarted nor reported by upaas, whose `unless-stopped`
restart policy ignores health; only `docker ps` and `docker inspect` show it.
The container also stops when either process exits.
The [upaas](https://git.eeqj.de/sneak/upaas) app for netwatch needs:
## Browser Compatibility
- Port: container port `8080`.
- Volume: container path `/data`.
- Environment variables: none is required. Every setting in
[Settings](#settings) applies, with four differences in the image:
- `BIND_ADDRESS` has no effect. The backend listens on `127.0.0.1` inside
the container.
- `PORT` is nginx's public port, from 1 to 65535 and not `8081`, where the
backend listens inside the container.
- `DATA_DIR` must be `/data` or a path below it, written in full, with no
`.` or `..` part and no extra `/`. A path through a symbolic link is
refused unless the link is relative and stays inside `/data`.
- `TRUSTED_PROXIES` names the proxies nginx trusts, as IP addresses or CIDRs
separated by commas; the backend's own setting is fixed to `127.0.0.1/32`.
`bin/entrypoint.sh` gives a lone address a `/32` or `/128` and checks each
entry with `netwatch-server check-cidr`, which refuses what the backend
would refuse. Set and empty, nginx trusts no proxy, and every client
behind a proxy then shares the proxy's one allowance of
`REPORTS_PER_MINUTE`. A client that connects from a trusted address can
write its own `X-Forwarded-For`. A port Docker publishes can bring
connections from the Docker network's gateway, such as `172.17.0.1`, which
the default includes. Where that matters, name only the proxy's own
addresses.
- Health: the image's `HEALTHCHECK`, described above.
Requires a modern browser with ES modules, Fetch API, Canvas API, and CSS custom
properties.
The container stops at start when a variable holds a value it cannot use. The
reason is in its log.
## Limitations
## Settings
- **CORS**: The checks are cross-origin requests in `no-cors` mode, so the page
cannot read the answer, only time it: any answer counts as reachable, an error
page included.
- **Local targets**: The cable modem at 192.168.100.1 and the detected gateway
answer only on a network that has them, and only when NetWatch is served from
localhost or a private address (see Monitoring targets).
- **Network conditions**: Measurements reflect browser-to-endpoint latency,
which includes your local network, ISP, and internet routing.
`netwatch-server` reads its settings from environment variables. It also reads a
`.env` file in the directory it starts in, and a YAML file named
`netwatch-server.yaml` in `/etc/netwatch-server/` or
`~/.config/netwatch-server/`, when one exists. A variable in the environment
wins over a file.
The server does not start when a variable holds a value it cannot use. Its error
names the variable. An empty variable counts as unset, except `TRUSTED_PROXIES`.
- `BIND_ADDRESS`, default empty: the IP address to listen on. Empty listens on
every interface. The image sets it to `127.0.0.1`.
- `PORT`, default `8080`: the port to listen on, from 1 to 65535. In the image
this is nginx's port; the backend listens on `8081`.
- `DATA_DIR`, default `./data/reports` (`/data/reports` in the image): the
directory for the report files. The server creates it if it is missing, and
stops at start if it cannot create a file in it.
- `DATA_DIR_MAX_BYTES`, default `1073741824` (1 GiB): the most bytes of report
files kept in `DATA_DIR`, oldest deleted first. A positive whole number. See
[Report limits](#report-limits).
- `REPORTS_PER_MINUTE`, default `60`: how many reports each client address may
send a minute. A positive whole number. See [Report limits](#report-limits).
- `TRUSTED_PROXIES`, default `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`: the
reverse proxies whose `X-Forwarded-For` and `X-Real-IP` headers are trusted,
as CIDRs separated by commas. See [Trusted proxies](#trusted-proxies).
- `CORS_ALLOWED_ORIGINS`, default empty: other origins whose pages may call the
API, separated by commas. See [CORS](#cors).
- `METRICS_USERNAME` and `METRICS_PASSWORD`, default empty: the basic auth
credentials for `/metrics`. See [Metrics](#metrics).
- `SENTRY_DSN`, default empty: the DSN of a Sentry project. Each request whose
handling crashes is reported there; the request still gets a 500.
- `DEBUG`, default empty: any non-empty value turns debug logging on, `false`
and `0` included. Every value is accepted.
### Trusted proxies
Each `TRUSTED_PROXIES` entry must be a CIDR, such as `127.0.0.1/32`; a lone
address is refused. A list replaces the default; set and empty, the server
trusts no proxy. Loopback is not in the default, so a reverse proxy on the same
host has to be named.
A request from a peer outside this set has its forwarded headers ignored; the
peer's own address is logged and rate limited. From a peer inside the set, the
client address is the right-most `X-Forwarded-For` entry that is not in the set.
The peer's address is used when every entry is in the set, or when the search
from the right meets an entry that is not an address, such as `unknown`.
`X-Real-IP` is read only when `X-Forwarded-For` is missing or empty.
### Routes
- `POST /api/v1/reports` takes a report from the page. It needs no credentials;
[Report limits](#report-limits) bound it instead.
- `GET /.well-known/healthcheck` answers 200 with a JSON object: `appname`,
`version`, `now`, `uptime_seconds`, `uptime_human` and `status`, which is
`"ok"`. While report files cannot be written, it answers 503 with the same
fields and `"status":"error"`.
- `GET /metrics` serves Prometheus metrics, only when `METRICS_USERNAME` and
`METRICS_PASSWORD` are set. See [Metrics](#metrics).
Every request body is capped at 1 MiB, and every request at 60 seconds.
### Report storage
The server keeps the reports it takes in memory and writes them to `DATA_DIR` as
files of JSON lines, compressed with zstd. It writes a new file every minute,
whenever 10 MiB of reports are waiting, and when it stops. With none waiting, it
writes no file. The files are named `reports-<timestamp>-<number>.jsonl.zst`;
the timestamp is UTC to the millisecond, so the names sort by time.
The reports of a failed write, as on a full disk, stay in memory for the next
write to try again. Until a write succeeds, `POST /api/v1/reports` refuses every
report with 500 and the health check answers 503.
### Report limits
`POST /api/v1/reports` takes reports from anyone who can reach it, so it is
bounded in four ways. Each refusal by the backend answers with the body
`{"status":"error"}`.
- JSON only. A report must be sent with `Content-Type: application/json`; any
other content type is refused with 415, and malformed JSON with 400.
- Body limit. A report body may be at most 1 MiB. A request that declares a
longer body, or a report that runs past that, is refused with 413.
- Rate limit. Each client address may send `REPORTS_PER_MINUTE` reports a
minute; past that it gets 429 with `Retry-After: 60`. The page sends one
report a minute from each open tab, so the default of 60 refuses nothing from
up to 30 tabs behind one address.
- Size cap. The report files in `DATA_DIR` may total at most
`DATA_DIR_MAX_BYTES`, counting the files already there at start and the
reports waiting in memory. When a report would take the total past the cap,
the oldest files are deleted to make room. A report is refused with 507 when
deleting the oldest files cannot make room.
At the defaults, one address can fill the 1 GiB cap with its own reports in
about 17 minutes, and every report stored before them is deleted to make room.
### CORS
The page needs no entry here: it calls the API from the origin it is served
from. By default the server sends no CORS headers, and browsers let no other
origin's pages call it. `CORS_ALLOWED_ORIGINS` lists other origins, such as
`https://netwatch.example.com`, whose pages may then call the API with `GET` and
`POST`. Each entry must be a plain origin as browsers send it: `scheme://host`,
with an optional `:port`, no path, no trailing `/` and no `*`.
### Metrics
With both `METRICS_USERNAME` and `METRICS_PASSWORD` set, the server serves
Prometheus metrics at `GET /metrics`. A request with those as its basic auth
credentials gets them; any other gets 401. With neither set, `/metrics`
answers 404. The metrics record each request that reaches the health check or
`POST /api/v1/reports`: its duration and response size, labelled with its path,
method and status. Each client address may make 60 requests to `/metrics` a
minute. Past that it gets 429 with `Retry-After: 60`, and its credentials are
not checked.
### Logging
The backend logs JSON to stdout, or plain text when stdout is a terminal. Each
request is logged with its method, URL, status, client address and duration.
Every value taken from a request is cut to 128 bytes before it is logged.
## Design
The repository holds the page, the backend and the image:
- `web/`: the page's source. `index.html` loads `src/main.js` and
`src/styles.css`.
- `cmd/netwatch-server/` and `internal/`: the Go backend. `cmd/` holds only
`main`, which calls into `internal/cli`.
- `configs/`: nginx's configuration for the image, `nginx.conf` and
`security-headers.conf`.
- `bin/entrypoint.sh`: the image's entrypoint.
- `Dockerfile`: the lint and test phases, the two build stages and the image.
- `script/`: the development commands; `Makefile` targets call them.
- `test/unit/`: the page's unit tests. `test/viewport/`: the layout test.
### The page
The page is built with Vite and Tailwind CSS v4. All its code is in
`web/src/main.js`:
- `CONFIG`: the timing and display constants. The interval menu sets its
`updateInterval`; the check timeout and the history span follow from it.
- `WAN_HOSTS`: the WAN targets, each with its URL and, for the S3 entries, the
method `HEAD`.
- `HostState` and `AppState`: one host's history and status, and the whole
page's state.
- `measureLatency`: one check. `tick`: one round, which checks every host in
parallel and draws each row as soon as its check ends.
- `SparklineRenderer`: the graphs. `buildUI`, `updateHostRow`, `updateSummary`
and `updateHealthBox`: the page and its parts.
- `Reporter`: builds and posts the reports. `buildReport` is a pure function of
the hosts' state.
### The backend
`netwatch-server` is a Go HTTP server. The `fx` library starts and stops its
parts in dependency order. The backend's packages are in `internal/`:
- `cli`: the command line: the server when given no arguments, or the
`check-cidr` and `prepare-data-dir` subcommands that `bin/entrypoint.sh` runs.
- `config`: reads the settings and refuses values the server cannot use.
- `server`: the router, the routes and the HTTP server.
- `middleware`: the request log, the security headers, CORS, the body limit, the
rate limit, the client address resolution and the metrics.
- `handlers`: the health check and the report route.
- `reportbuf`: the in-memory buffer of reports and the files it writes them to.
It also holds `PrepareDataDir`, which `prepare-data-dir` runs.
- `healthcheck`, `logger` and `globals`: the health status, the logger, and the
name and version the build stamps in.
## Development
### Entrypoints
This repository adheres to the
[Scripts to Rule Them All](https://github.com/github/scripts-to-rule-them-all)
standard. The scripts in `script/` are the entrypoints for the development
workflow, and the `Makefile` targets are thin shims that call them.
- `script/bootstrap`: install the dependencies. It installs the pinned node,
yarn and Go when the ones on `PATH` do not pass its checks, and links them
into `~/.local/bin`, which has to be on `PATH`. It installs no Go linter and
no Docker.
- `script/setup`: `script/bootstrap`, then the git pre-commit hook.
- `script/dev`: run the Vite dev server.
- `script/build`: build the page into `dist/`, then the static `netwatch-server`
binary into the repo root. Its version is `VERSION` from the environment, else
`git describe --tags --always --dirty`, else `dev`.
- `script/run`: `script/build`, then run `netwatch-server` with its defaults.
- `script/clean`: remove what `script/build` writes.
- `script/projectname`: print `netwatch`, the image tag `script/docker` uses.
- `script/yarn`: run yarn under the node `script/bootstrap` would use.
- `script/test`: build the `test` phase of `Dockerfile`, writing no image: the
Go tests with the race detector and coverage, and the page's unit tests.
- `script/lint`: build the `lint` phase of `Dockerfile`, writing no image:
golangci-lint over the Go packages and eslint over the JavaScript.
- `script/fmt`: run the formatters: prettier over the JavaScript, CSS, HTML and
Markdown, then gofmt over `cmd/` and `internal/`. They write the files in
place.
- `script/fmt-check`: check the formatting (read-only), with the same scope as
`script/fmt`.
- `script/check`: `script/test`, `script/lint` and `script/fmt-check`.
- `script/add-dependency`: add a page dependency, or move one to another
version: `make add-dependency PACKAGE=<name>@<version>`.
- `script/tidy`: run `go mod tidy`.
- `script/frontend-test`: run the unit tests in `test/unit/` on the host, with
Node's built-in test runner, then the production build.
- `script/frontend-fmt` and `script/frontend-fmt-check`: the prettier half of
`script/fmt` and `script/fmt-check`.
- `script/frontend-viewport-test`: check the built page's layout in a
containerised headless Chrome, not as part of `script/check`; see
[test/viewport/README.md](test/viewport/README.md).
- `script/docker`: build the image from `Dockerfile`, tagged `netwatch`.
- `script/cibuild`: `script/bootstrap`, `script/check`, then the image build.
The Gitea workflow `.gitea/workflows/check.yml` runs it on every push.
- `script/precommit`: run by the git pre-commit hook; it runs `script/check`.
- `script/install-precommit`: install the git pre-commit hook. `make hooks`
calls it.
### Tests
`make test` runs the backend's Go tests and the page's unit tests in Docker. The
unit tests import `web/src/main.js` in Node and call the functions it exports;
no browser is involved. `make frontend-viewport-test` checks the built page's
layout in a headless Chrome; [test/viewport/README.md](test/viewport/README.md)
says what it checks and what it cannot.
## TODO
TODO.md
+4
View File
@@ -23,6 +23,10 @@ Run `make frontend-viewport-test` in CI as its own step; it is not part of
# Completed Steps
- 2026-10-26: `README.md`, `TODO.md` and `test/viewport/README.md` are rewritten
sentence by sentence ([#189](https://git.eeqj.de/sneak/netwatch/issues/189)).
Each sentence reads on the first pass: one idea, under about 30 words, the
verb early. Every statement matches the code on `next`.
- 2026-10-26: a target whose home page answers with a redirect is checked at
`/robots.txt` on the same host, which answers without one
([#194](https://git.eeqj.de/sneak/netwatch/issues/194)). These are the AWS