End the mnemonic prompt at end of input (closes #78)

term.ReadPassword reads the terminal with a raw read that returns 0
bytes at the end of input and takes that as nothing yet, so Ctrl-D at
the prompt did nothing. On the Unix systems the prompt now sets the
terminal as ReadPassword does and reads the line from standard input,
which reports the end of input; elsewhere, such as Windows, it still
uses ReadPassword. Ctrl-D with nothing typed gives an empty mnemonic,
refused with status 1, and the terminal settings are put back.

A test runs the tool on a pseudo-terminal (github.com/creack/pty, at a
commit past v1.1.24, whose Open on Linux can return another pty's
terminal) and types Ctrl-D at the prompt.

Model: opus-5-5

README.md

@@ -117,9 +117,10 @@ order; the first one found wins:
    held in the environment.
 3. Environment variable `KEYFUNC_MNEMONIC`: the mnemonic itself.
 4. A prompt on the terminal with echo turned off. The mnemonic is what is typed
-   up to Enter or the end of input (Ctrl-D), and echo is turned back on once it
+   up to Enter, and echo is turned back on once it is read. Ctrl-D with nothing
-   is read. Ctrl-D with nothing typed leaves the mnemonic empty, so the tool
+   typed ends the prompt at once and leaves the mnemonic empty, so the tool
-   refuses it and exits with status 1.
+   refuses it and exits with status 1. After text has been typed, Ctrl-D has to
+   be pressed twice to end the prompt, and the text typed is the mnemonic.
 
 If none of these is available and standard input is not a terminal, the tool
 refuses and exits with status 1. A mnemonic that is empty, does not have 12, 15,
@@ -129,10 +130,12 @@ the list is named by its position, never printed. Keys are derived from the
 mnemonic's words joined by single spaces, whatever whitespace is around or
 between them, so one word per line, tabs or extra spaces give the same keys.
 
-The key index, `--words`, the `--to` recipients and the file `age encrypt` or
+The key index, `--words`, the `--to` recipients, the file `age encrypt` or
-`age decrypt` is given to read are checked before the mnemonic is looked for, so
+`age decrypt` is given to read and its `-o` path are checked before the mnemonic
-a run refused for one of them never prompts for the mnemonic or runs the
+is looked for, so a run refused for one of them never prompts for the mnemonic
-mnemonic command.
+or runs the mnemonic command. An `-o` path is refused at that point if it is a
+directory or a symlink to one, if its directory is missing or is not a
+directory, or if it is a symlink that points at nothing.
 
 `KEYFUNC_MNEMONIC` and `KEYFUNC_MNEMONIC_COMMAND` are removed from the
 environment before the mnemonic command, the system `ssh` (`keyfunc ssh to`) and
@@ -286,7 +289,9 @@ or a device, such as `/dev/null`, is written to directly.
 
 Decrypts the file (or standard input) with the derived identity. Output goes to
 `-o`, which is treated as for `encrypt`, or standard output. If the identity is
-not one of the recipients, the tool says so and exits with status 1.
+not one of the recipients, the tool says so and exits with status 1. The text
+form needs no flag, and up to 1024 bytes of blank lines in front of it are
+skipped, as `age` skips them.
 
 ## Derived mnemonics: `keyfunc mnemonic`
 

internal/agekey/agekey.go

@@ -4,6 +4,7 @@ package agekey
 
 import (
 	"bufio"
+	"bytes"
 	"errors"
 	"fmt"
 	"io"
@@ -187,12 +188,18 @@ func (k *Key) Decrypt(dst io.Writer, src io.Reader) error {
 }
 
 // unarmored strips the text form when the input begins with the line
-// that starts one, and leaves binary input alone.
+// that starts one, and leaves binary input alone. Like age, it looks
+// past up to 1024 bytes of whitespace for that line, and the text form
+// reader skips blank lines in front of it.
 func unarmored(src io.Reader) io.Reader {
+	const maxWhitespace = 1024
+
 	buffered := bufio.NewReader(src)
 
-	start, err := buffered.Peek(len(armor.Header))
+	// A shorter input gives an error along with all of it, which is
-	if err == nil && string(start) == armor.Header {
+	// enough to look at.
+	start, _ := buffered.Peek(maxWhitespace + len(armor.Header))
+	if bytes.HasPrefix(bytes.TrimSpace(start), []byte(armor.Header)) {
 		return armor.NewReader(buffered)
 	}
 

internal/agekey/agekey_test.go

@@ -2,6 +2,7 @@ package agekey_test
 
 import (
 	"bytes"
+	"io"
 	"strings"
 	"testing"
 
@@ -99,6 +100,27 @@ func TestTheArmoredFormIsText(t *testing.T) {
 	))
 }
 
+func TestTheTextFormIsReadWithWhitespaceInFront(t *testing.T) {
+	t.Parallel()
+
+	key := forIndex(t, 0)
+
+	var sealed bytes.Buffer
+
+	err := key.Encrypt(&sealed, strings.NewReader("hello"), nil, true)
+	require.NoError(t, err)
+
+	// A blank line and a line of two spaces, as pasting can leave. age
+	// refuses spaces on the first line of the text form itself, and so
+	// does this.
+	pasted := io.MultiReader(strings.NewReader("\n  \n"), &sealed)
+
+	var opened bytes.Buffer
+
+	require.NoError(t, key.Decrypt(&opened, pasted))
+	require.Equal(t, "hello", opened.String())
+}
+
 func TestAFileForSomebodyElseIsRefused(t *testing.T) {
 	t.Parallel()
 

internal/cli/age/age.go

@@ -11,6 +11,7 @@ import (
 	"os"
 	"os/signal"
 	"path/filepath"
+	"syscall"
 
 	"github.com/spf13/cobra"
 	"sneak.berlin/go/keyfunc/internal/agekey"
@@ -108,9 +109,9 @@ func decrypt() *cobra.Command {
 }
 
 // runEncrypt encrypts to the derived recipient and any others given.
-// The recipients are read and the input opened before the key is
+// The recipients are read, the -o path looked at and the input opened
-// derived, so that a run refused for either never asks for the
+// before the key is derived, so that a run refused for any of them
-// mnemonic.
+// never asks for the mnemonic.
 func runEncrypt(cmd *cobra.Command, args []string) error {
 	names, err := cmd.Flags().GetStringArray("to")
 	if err != nil {
@@ -127,6 +128,11 @@ func runEncrypt(cmd *cobra.Command, args []string) error {
 		return fmt.Errorf("reading the armor flag: %w", err)
 	}
 
+	err = checkOutput(cmd)
+	if err != nil {
+		return err
+	}
+
 	src, closeSrc, err := input(cmd, args)
 	if err != nil {
 		return err
@@ -144,9 +150,14 @@ func runEncrypt(cmd *cobra.Command, args []string) error {
 	})
 }
 
-// runDecrypt decrypts with the derived identity. The input is opened
+// runDecrypt decrypts with the derived identity. The -o path is looked
-// before the key is derived, as for runEncrypt.
+// at and the input opened before the key is derived, as for runEncrypt.
 func runDecrypt(cmd *cobra.Command, args []string) error {
+	err := checkOutput(cmd)
+	if err != nil {
+		return err
+	}
+
 	src, closeSrc, err := input(cmd, args)
 	if err != nil {
 		return err
@@ -225,6 +236,52 @@ func input(cmd *cobra.Command, args []string) (io.Reader, func(), error) {
 	return file, func() { _ = file.Close() }, nil
 }
 
+// checkOutput refuses an -o path that output could not write to,
+// before anything is written: a directory or a symlink to one, one
+// whose directory is missing or is not a directory, or a symlink that
+// points at nothing. It creates nothing; output looks at the path again
+// when it writes.
+func checkOutput(cmd *cobra.Command) error {
+	name, err := cmd.Flags().GetString("output")
+	if err != nil {
+		return fmt.Errorf("reading the output file: %w", err)
+	}
+
+	if name == "" {
+		return nil
+	}
+
+	info, err := os.Lstat(name)
+
+	switch {
+	case errors.Is(err, fs.ErrNotExist):
+		// replace makes its new file in this directory. When the
+		// directory is a file instead, os.Lstat has already failed with
+		// ENOTDIR, the case below.
+		directory := filepath.Dir(name)
+
+		_, err = os.Stat(directory)
+		if err != nil {
+			return fmt.Errorf("looking at %s: %w", directory, err)
+		}
+
+		return nil
+	case err != nil:
+		return fmt.Errorf("looking at %s: %w", name, err)
+	case info.Mode().Type() == fs.ModeSymlink:
+		info, err = os.Stat(name)
+		if err != nil {
+			return fmt.Errorf("following %s: %w", name, err)
+		}
+	}
+
+	if info.IsDir() {
+		return fmt.Errorf("writing to %s: %w", name, syscall.EISDIR)
+	}
+
+	return nil
+}
+
 // output has the work write to the named path, going by what is there
 // without following a final symlink:
 //

internal/cli/age_test.go

@@ -108,6 +108,44 @@ func TestAnInputFileThatCannotBeOpenedIsRefused(t *testing.T) {
 	}
 }
 
+// The mnemonic command fails in these runs, so the refusal of the -o
+// path shows that it was looked at before the mnemonic was looked for.
+func TestAnOutputPathThatCannotBeWrittenIsRefused(t *testing.T) {
+	t.Setenv(mnemonic.CommandVariable, failingMnemonicCommand)
+
+	plain := written(t, "notes.txt", "the secret\n")
+	directory := t.TempDir()
+	missing := filepath.Join(directory, "missing")
+	dangling := filepath.Join(directory, "dangling")
+	require.NoError(t, os.Symlink(missing, dangling))
+
+	toDirectory := filepath.Join(directory, "to-directory")
+	require.NoError(t, os.Symlink(t.TempDir(), toDirectory))
+
+	refusals := map[string]error{
+		filepath.Join(missing, "notes.age"): fs.ErrNotExist,
+		filepath.Join(plain, "notes.age"):   syscall.ENOTDIR,
+		dangling:                            fs.ErrNotExist,
+		directory:                           syscall.EISDIR,
+		toDirectory:                         syscall.EISDIR,
+	}
+
+	for name, refusal := range refusals {
+		out, err := execute(t, "age", "encrypt", "-o", name, plain)
+		require.ErrorIs(t, err, refusal, name)
+		require.Empty(t, out, name)
+
+		out, err = execute(t, "age", "decrypt", "-o", name, plain)
+		require.ErrorIs(t, err, refusal, name)
+		require.Empty(t, out, name)
+	}
+
+	// Nothing was made beside the two symlinks.
+	left, err := os.ReadDir(directory)
+	require.NoError(t, err)
+	require.Len(t, left, 2)
+}
+
 func TestAFileForAnotherKeyIsRefused(t *testing.T) {
 	t.Setenv(mnemonic.Variable, example())
 

internal/mnemonic/mnemonic.go

@@ -2,18 +2,15 @@
 package mnemonic
 
 import (
-	"bufio"
 	"bytes"
 	"context"
 	"errors"
 	"fmt"
-	"io"
 	"os"
 	"os/exec"
 	"slices"
 	"strings"
 
-	"golang.org/x/sys/unix"
 	"golang.org/x/term"
 	"sneak.berlin/go/keyfunc/internal/bip39"
 )
@@ -129,10 +126,7 @@ func ChildEnv() []string {
 	return kept
 }
 
-// ask prompts on the terminal with echo turned off and reads one line,
+// ask prompts on the terminal with echo turned off.
-// which ends at a newline or at the end of input (Ctrl-D). The terminal
-// is set as term.ReadPassword sets it; ReadPassword itself is not used
-// because it never sees the end of input and goes on waiting.
 func ask() (string, error) {
 	fd := int(os.Stdin.Fd())
 
@@ -140,32 +134,13 @@ func ask() (string, error) {
 		return "", ErrMissing
 	}
 
-	settings, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
-	if err != nil {
-		return "", fmt.Errorf("reading the terminal settings: %w", err)
-	}
-
-	hidden := *settings
-	hidden.Lflag &^= unix.ECHO
-	hidden.Lflag |= unix.ICANON | unix.ISIG
-	hidden.Iflag |= unix.ICRNL
-
-	err = unix.IoctlSetTermios(fd, ioctlWriteTermios, &hidden)
-	if err != nil {
-		return "", fmt.Errorf("turning echo off: %w", err)
-	}
-
-	defer func() { _ = unix.IoctlSetTermios(fd, ioctlWriteTermios, settings) }()
-
 	fmt.Fprint(os.Stderr, "mnemonic: ")
 
-	// With ICANON set, a read from the terminal returns at most one
+	typed, err := readWithoutEcho()
-	// line, so the buffer takes nothing past the newline.
-	typed, err := bufio.NewReader(os.Stdin).ReadString('\n')
 
 	fmt.Fprintln(os.Stderr)
 
-	if err != nil && !errors.Is(err, io.EOF) {
+	if err != nil {
 		return "", fmt.Errorf("reading the mnemonic: %w", err)
 	}
 

internal/mnemonic/prompt_notunix.go

@@ -0,0 +1,18 @@
+//go:build !aix && !darwin && !dragonfly && !freebsd && !linux && !netbsd && !openbsd && !solaris && !zos
+
+package mnemonic
+
+import (
+	"os"
+
+	"golang.org/x/term"
+)
+
+// readWithoutEcho reads one line from the terminal on standard input
+// with echo turned off, through term.ReadPassword, on the systems
+// prompt_unix.go is not built for, such as Windows.
+func readWithoutEcho() (string, error) {
+	typed, err := term.ReadPassword(int(os.Stdin.Fd()))
+
+	return string(typed), err
+}

internal/mnemonic/prompt_unix.go

@@ -0,0 +1,48 @@
+//go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
+
+package mnemonic
+
+import (
+	"bufio"
+	"errors"
+	"fmt"
+	"io"
+	"os"
+
+	"golang.org/x/sys/unix"
+)
+
+// readWithoutEcho reads one line from the terminal on standard input
+// with echo turned off. The line ends at a newline or at the end of
+// input (Ctrl-D). The terminal is set as term.ReadPassword sets it;
+// ReadPassword itself is not used here because it never sees the end
+// of input and goes on waiting.
+func readWithoutEcho() (string, error) {
+	fd := int(os.Stdin.Fd())
+
+	settings, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
+	if err != nil {
+		return "", fmt.Errorf("reading the terminal settings: %w", err)
+	}
+
+	hidden := *settings
+	hidden.Lflag &^= unix.ECHO
+	hidden.Lflag |= unix.ICANON | unix.ISIG
+	hidden.Iflag |= unix.ICRNL
+
+	err = unix.IoctlSetTermios(fd, ioctlWriteTermios, &hidden)
+	if err != nil {
+		return "", fmt.Errorf("turning echo off: %w", err)
+	}
+
+	defer func() { _ = unix.IoctlSetTermios(fd, ioctlWriteTermios, settings) }()
+
+	// With ICANON set, a read from the terminal returns at most one
+	// line, so the buffer takes nothing past the newline.
+	typed, err := bufio.NewReader(os.Stdin).ReadString('\n')
+	if errors.Is(err, io.EOF) {
+		return typed, nil
+	}
+
+	return typed, err
+}

internal/mnemonic/termios_other.go

@@ -1,3 +1,5 @@
+//go:build aix || linux || solaris || zos
+
 package mnemonic
 
 import "golang.org/x/sys/unix"