some arduino sketches

master
Jeffrey Paul 2 years ago committed by user
parent 94b5cae9ae
commit ac052d190a
  1. 131
      arduino/i2c-lcd/i2c-lcd.ino
  2. 51
      arduino/infrared-read/infrared-read.ino
  3. 82
      arduino/quadalphanum/quadalphanum.ino
  4. 110
      arduino/wwvb/wwvb.ino

@ -0,0 +1,131 @@
#define SSD1306_NO_SPLASH
// OLED display width and height, in pixels
#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 32
#define OLED_RESET -1
// i2c address for oled
///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
#define SCREEN_ADDRESS 0x3C
#include <Adafruit_SSD1306.h>
#include <splash.h>
#include <Adafruit_GrayOLED.h>
#include <gfxfont.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SPITFT.h>
#include <Adafruit_SPITFT_Macros.h>
#include <LiquidCrystal_I2C.h>
// set the LCD address to 0x27 for a 16 chars and 2 line display
LiquidCrystal_I2C lcd(0x27, 16, 2);
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
void setup() {
lcd.init();
lcd.backlight();
lcd.setCursor(0, 0);
lcd.print("0x123456789abcde");
lcd.setCursor(0, 1);
lcd.print("fghijklmnopqrstu");
Serial.begin(115200);
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
Serial.println(F("SSD1306 allocation failed"));
for (;;); // Don't proceed, loop forever
}
display.display();
delay(50); // Pause for 2 seconds
// Clear the buffer
display.clearDisplay();
testdrawstyles(); // Draw 'stylized' characters
panic();
//
// // Invert and restore display, pausing in-between
// display.invertDisplay(true);
// delay(1000);
// display.invertDisplay(false);
// delay(1000);
}
void panic() {
for (;;) {
display.invertDisplay(true);
delay(1000);
}
}
void loop()
{
}
#define LINE_HEIGHT_PX 9
void testdrawstyles(void) {
display.clearDisplay();
display.setTextSize(1); // Normal 1:1 pixel scale
display.setTextColor(SSD1306_WHITE); // Draw white text
display.setCursor(0, 0 * LINE_HEIGHT_PX);
display.println(F("123456789112345678921"));
display.setCursor(0, 1 * LINE_HEIGHT_PX);
display.println(F("234567893123456789412"));
display.setCursor(0, 2 * LINE_HEIGHT_PX);
display.println(F("345678951234567896123"));
display.display();
display.startscrollright(0x00, 0xFF);
/*
display.setTextColor(SSD1306_BLACK, SSD1306_WHITE); // Draw 'inverse' text
display.println(3.141592);
display.setTextSize(2); // Draw 2X-scale text
display.setTextColor(SSD1306_WHITE);
display.print(F("0x")); display.println(0xDEADBEEF, HEX);
display.display();
delay(2000);
*/
}
/*
void testscrolltext(void) {
display.clearDisplay();
display.setTextSize(1.5); // Draw 2X-scale text
display.setTextColor(SSD1306_WHITE);
display.setCursor(10, 0);
display.println(F("1337CAFE"));
display.display(); // Show initial text
delay(70);
// Scroll in various directions, pausing in-between:
display.startscrollright(0x00, 0x0F);
delay(2000);
display.stopscroll();
delay(1000);
display.startscrollleft(0x00, 0x0F);
delay(2000);
display.stopscroll();
delay(1000);
display.startscrolldiagright(0x00, 0x07);
delay(2000);
display.startscrolldiagleft(0x00, 0x07);
delay(2000);
display.stopscroll();
delay(1000);
}
*/

@ -0,0 +1,51 @@
/*
ESP8266 BlinkWithoutDelay by Simon Peter
Blink the blue LED on the ESP-01 module
Based on the Arduino Blink without Delay example
This example code is in the public domain
The blue LED on the ESP-01 module is connected to GPIO1
(which is also the TXD pin; so we cannot use Serial.print() at the same time)
Note that this sketch uses LED_BUILTIN to find the pin with the internal LED
*/
#define IR_RX_PIN 14
#define IR_TX_PIN 12
#define SERIAL_BPS 115200
#define POWER_BUTTON 0xFFEA15
#define EDIT_BUTTON 0xFF7887
#define EXIT_BUTTON 0xFF38C7
#define ONE_BUTTON 0xFF08F7
#define TWO_BUTTON 0xFF8877
#define THREE_BUTTON 0xFF48B7
#define FOUR_BUTTON 0xFFC837
#define FIVE_BUTTON 0xFF28D7
#define SIX_BUTTON 0xFFA857
#define SEVEN_BUTTON 0xFFE817
#define EIGHT_BUTTON 0xFF18E7
#define NINE_BUTTON 0xFF9867
#define ZERO_BUTTON 0xFFB847
#include <IRremote.h>
IRrecv irrecv(IR_RX_PIN);
decode_results results;
int ledState = LOW;
volatile byte IRInputState;
void setup() {
IrReceiver.begin(IR_RX_PIN, ENABLE_LED_FEEDBACK); // Start the receiver
pinMode(LED_BUILTIN, OUTPUT);
Serial.begin(SERIAL_BPS);
Serial.print("herro booted\n");
}
void loop() {
if (IrReceiver.decode()) {
Serial.println(IrReceiver.decodedIRData.decodedRawData, HEX);
IrReceiver.printIRResultShort(&Serial); // optional use new print version
IrReceiver.resume(); // Enable receiving of the next value
}
}

@ -0,0 +1,82 @@
// Demo the quad alphanumeric display LED backpack kit
// scrolls through every character, then scrolls Serial
// input onto the display
#include <Wire.h>
#include <Adafruit_GFX.h>
#include "Adafruit_LEDBackpack.h"
Adafruit_AlphaNum4 one = Adafruit_AlphaNum4();
Adafruit_AlphaNum4 two = Adafruit_AlphaNum4();
unsigned long ticks;
void setup() {
Serial.begin(9600);
one.begin(0x71); // pass in the address
two.begin(0x70);
one.writeDigitRaw(3, 0x0);
one.writeDigitRaw(0, 0xFFFF);
one.writeDisplay();
delay(200);
one.writeDigitRaw(0, 0x0);
one.writeDigitRaw(1, 0xFFFF);
one.writeDisplay();
delay(200);
one.writeDigitRaw(1, 0x0);
one.writeDigitRaw(2, 0xFFFF);
one.writeDisplay();
delay(200);
one.writeDigitRaw(2, 0x0);
one.writeDigitRaw(3, 0xFFFF);
one.writeDisplay();
delay(200);
one.clear();
one.writeDisplay();
two.clear();
two.writeDisplay();
one.writeDigitAscii(0, '1');
one.writeDigitAscii(1, '2');
one.writeDigitAscii(2, '0');
one.writeDigitAscii(3, '0');
two.writeDigitAscii(0, '0');
two.writeDigitAscii(1, '1');
two.writeDigitAscii(2, '2');
two.writeDigitAscii(3, '3');
one.writeDisplay();
two.writeDisplay();
delay(300);
Serial.println("Start typing to display!");
}
char displaybuffer[4] = {' ', ' ', ' ', ' '};
void loop() {
ticks = millis();
sprintf(displaybuffer, "%02d", ticks/1000);
sprintf(displaybuffer+2, "%02d", ticks-(ticks/1000)*1000);
Serial.println(displaybuffer);
// set every digit to the buffer
two.writeDigitAscii(0, displaybuffer[0]);
two.writeDigitAscii(1, displaybuffer[1]);
two.writeDigitAscii(2, displaybuffer[2]);
two.writeDigitAscii(3, displaybuffer[3]);
// write it out!
two.writeDisplay();
delay(10);
}

@ -0,0 +1,110 @@
/*
ESP8266 Blink by Simon Peter
Blink the blue LED on the ESP-01 module
This example code is in the public domain
The blue LED on the ESP-01 module is connected to GPIO1
(which is also the TXD pin; so we cannot use Serial.print() at the same time)
Note that this sketch uses LED_BUILTIN to find the pin with the internal LED
*/
#define WWV_SIGNAL_PIN 14
void ICACHE_RAM_ATTR readLevel();
volatile byte wwvbInState; // store receiver signal level
byte prevWwvbInState; // store previous signal level
unsigned int prevEdgeMillis; // store time signal was read
byte bitVal; // bit decoded 0, 1 or Mark
byte badBit; // bad bit, noise detected
byte prevMark; // store previous mark bit
void setup() {
pinMode(LED_BUILTIN, OUTPUT); // Initialize the LED_BUILTIN pin as an output
pinMode(WWV_SIGNAL_PIN, INPUT);
attachInterrupt(digitalPinToInterrupt(WWV_SIGNAL_PIN), readLevel, CHANGE); // fire interrupt on edge detected
Serial.begin(9600);
Serial.print("herro booted\n");
}
// the loop function runs over and over again forever
void loop() {
if (wwvbInState != prevWwvbInState) {
pulseValue();
prevWwvbInState = wwvbInState;
}
yield();
}
void pulseValue() {
unsigned int edgeMillis = millis(); // save current time
badBit = 0; // set noise counter to zero
if (wwvbInState == 1) { // rising edge
prevEdgeMillis = edgeMillis; // set previous time to current
}
else { // falling edge
int pulseLength = edgeMillis - prevEdgeMillis; // calculate pulse length millis
if (pulseLength < 100) { // less than 100ms, noise pulses
badBit = 1;
}
else if (pulseLength < 400) { // 800ms carrier drop mark
bitVal = 2;
}
else if (pulseLength < 700) { // 500ms carrier drop one
bitVal = 1;
}
else { // 200ms carrier drop zero
bitVal = 0;
}
if (badBit == 0) {
printBitVal();
}
}
}
void readLevel() {
wwvbInState = digitalRead(WWV_SIGNAL_PIN); // read signal level
digitalWrite(LED_BUILTIN, !wwvbInState); // flash WWVB receiver indicator pin
yield();
}
void printBitVal() {
if ((bitVal == 2) && (prevMark == 0)) {
Serial.print(" : ");
prevMark = 1;
}
else if ((bitVal == 2) && (prevMark == 1)) {
Serial.print("\nBit Value: ");
Serial.print("| ");
prevMark = 0;
}
else {
Serial.print(bitVal, DEC);
prevMark = 0;
}
}
/*****************************************************************************
* Time display functions
*****************************************************************************/
void printTime() {
Serial.print("?x00?y0?f"); // movie cursor to line 1 char 1, clear screen
}
// LCD routines to initialize LCD and clear screen
void lcdInit() { // using P H Anderson Serial LCD driver board
Serial.print("?G216"); // configure driver for 2 x 16 LCD
delay(300);
Serial.print("?BDD"); // set backlight brightness
delay(300);
Serial.print("?f"); // clear screen
Serial.print("?c0"); // set cursor off
}
Loading…
Cancel
Save